Mini Construction Safety and Health Program for 3-Storey School Project
Project Overview –
**Project Duration:** 8 months –
**Number of Workers:** 30 –
**Main Risks:** Working at heights, electrical installations, excavation
--- #### 1. Hazard Identification –
**Working at Heights:** - Risks: Falls from ladders, scaffolds, and roofs. - Control Measures: Use of
guardrails, harnesses, and ensuring scaffolds are properly erected and inspected.
- **Electrical Installations:** - Risks: Electrocution, electric shock from faulty wiring. - Control
Measures: Lockout/tagout procedures, ensuring all electrical installations are conducted by qualified
electricians, using insulated tools.
- **Excavation:** - Risks: Cave-ins, falling loads, and hazardous materials. - Control Measures:
Proper trench shoring, daily inspections, and establishing exclusion zones around excavations.
--- #### 2. Personal Protective Equipment (PPE) Requirements –
**Hard Hats:** Required at all times on site. –
**High-Visibility Vests:** Must be worn when on site. –
**Safety Footwear:** Steel-toe boots are mandatory. –
**Gloves:** Appropriate gloves for different tasks (e.g., cut-resistant for handling sharp materials). **Eye Protection:** Safety glasses or goggles when handling materials or working with tools. **Hearing Protection:** Required in areas where noise levels exceed permissible limits. –
**Fall Protection Gear:** Harness and lanyard for workers at heights greater than 6 feet. ---
#### 3. Safety and Health Committee Roles –
**Chairperson:** - Leads meetings and coordinates safety initiatives. –
**Safety Officer:** - Monitors compliance, conducts inspections, and provides training. –
**Worker Representatives:** - Communicate worker concerns and promote safety practices among
peers. –
**Supervisors:** - Ensure workers follow safety protocols and report hazards. –
- #### 4. Emergency Preparedness Plan –
**Emergency Contacts:** - List of local emergency services and relevant contacts. –
**First Aid Stations:** - Locations of first aid kits and staff trained in first aid and CPR. –
**Evacuation Procedures:** - Clearly marked exits and routes; regular drills to practice evacuating. **Incident Reporting:** - All incidents must be reported to the Safety Officer immediately, regardless
of severity. –
**Environmental Conditions:** - Procedures for adverse weather (e.g., lightning, floods) that may
impact safety. ---
#### 5. Toolbox Meeting Schedule –
**Frequency:** Weekly meetings –
**Topics to Cover:** - Weekly safety updates –
Discussion of recently identified hazards –
Review of incidents/near misses –
Specific training sessions (e.g., fall protection, electrical safety) –
**Documentation:** Minutes of each meeting and attendance logs will be recorded for accountability. ---
#### 6. Responsibilities of the Safety Officer
- Conduct regular site inspections for compliance with safety standards.
- Facilitate safety training and orientation for all new workers.
- Monitor adherence to PPE requirements and enforce usage.
- Investigate incidents and near misses, documenting findings and corrective actions.
- Serve as a liaison between management and workers regarding safety concerns.
- Coordinate toolbox meetings and continuous improvement of safety practices.
--- This safety and health program aims to minimize risks and promote a safe working environment
throughout the construction of the new school. Regular updates and reviews of the program will
ensure ongoing compliance and adaptability to any emerging hazards.