USGBC
LEED-Green-Associate Exam
US Green Building Council LEED Green Associate Exam
Exam Latest Version: 9.0
DEMO Version
Full Version Features:
• 90 Days Free Updates
• 30 Days Money Back Guarantee
• Instant Download Once Purchased
• 24 Hours Live Chat Support
Full version is available at link below with affordable price.
https://www.directcertify.com/usgbc/leed-green-associate
https://www.directcertify.com/usgbc/leed-green-associate
Page 1 of 5
Question 1. (Single Select)
The project area defined by the perimeter of a building plan is referred to as the building's
A: shell
B: density
C: footprint
D: envelope
Correct Answer: C
Explanation:
The footprint of a building is the area of ground that it covers, defined by its perimeter. It’s
essentially the shape that results when you trace around the outer walls of a building plan. This
term is used in architecture and urban planning to describe the space that a building occupies on
a site. LEED Green Associate Candidate Handbook, U.S. Green Building Council resources
Question 2. (Single Select)
Energy and Atmosphere Credit encompasses
A: site selection, site design and environmental concerns
B: integrative process, building loads and EQ
C: building loads, energy performance management and EQ
D: building loads, energy performance management and environmental concerns
Correct Answer: C
Explanation:
The Energy and Atmosphere Credit in LEED encompasses building loads, energy performance
management, and environmental quality (EQ). Building loads refer to the amount of energy
consumed by a building’s systems, such as heating, cooling, lighting, and equipment. Energy
https://www.directcertify.com/usgbc/leed-green-associate
Page 2 of 5
performance management involves strategies to reduce energy consumption and improve
efficiency. Environmental quality refers to the conditions inside the building, including air quality,
thermal comfort, and access to daylight and views. LEED Green Associate Candidate
Handbook, U.S. Green Building Council resources
Question 3. (Single Select)
Which of the following is a component of the Promote Sustainable and Regenerative Material
Resource Cycles impact category?
A: Move to Cyclical, Non-Depleting Material Cycles
B: Protect Human Health Globally and Across the Built Environment Life Cycle
C: Protection and Restoration of Water Regimes and Natural Hydrological Cycles
D: Greenhouse Gas (GHG) Emissions Reduction from the Embodied Energy of Materials
Correct Answer: A
Explanation:
The Promote Sustainable and Regenerative Material Resource Cycles impact category in LEED
encourages the use of materials that can be continually cycled back into the same system at
their end-of-life. This is referred to as moving to cyclical, non-depleting material cycles. It
promotes the use of renewable or recyclable materials and reduces waste. LEED Green
Associate Candidate Handbook, U.S. Green Building Council resources
Question 4. (Single Select)
During which stage of a project is implementation of the Integrative Process most effective in
improving performance?
A: Operation
B: Early de sign
C: Construction
https://www.directcertify.com/usgbc/leed-green-associate
Page 3 of 5
D: Construction document
Correct Answer: B
Explanation:
The Integrative Process is most effective during the early design stage of a project. This is when
key decisions about the project are being made that can have a significant impact on its
sustainability performance. By considering sustainability objectives from the outset, teams can
identify opportunities for synergies and cost savings that may not be apparent later in the
project. LEED Green Associate Candidate Handbook, U.S. Green Building Council resources
Question 5. (Single Select)
Light colored paving and cool roofs are terms referring to materials with
A: lower emissivity and lower albedo
B: lower emissivity and higher albedo
C: higher emissivity and lower albedo
D: higher emissivity and higher albedo
Correct Answer: D
Explanation:
Light-colored paving and cool roofs refer to materials with higher emissivity and higher albedo.
Emissivity is the ability of a material to emit heat that it absorbs, while albedo is a measure of
how much light that hits a surface is reflected without being absorbed. Materials with high
emissivity can help reduce heat islands by releasing more of the heat they absorb, while those
with high albedo can reflect more sunlight and thus stay cooler. LEED Green Associate
Candidate Handbook, U.S. Green Building Council resources
https://www.directcertify.com/usgbc/leed-green-associate
Page 4 of 5
Full version is available at link below with affordable price.
https://www.directcertify.com/usgbc/leed-green-associate
30% Discount Coupon Code: Easter2025
https://www.directcertify.com/usgbc/leed-green-associate
Page 5 of 5