Why the
answer is a,
isn’t the
voltammeter
put for
battery
voltage
measurement
In answer specify perpendicular of the current to
refer to right or left magnetic direction
In both cases both of the forces are equal
Here, no
change in
current so no
change in the
torque
To make the change in the torque refer
to the change in the Q (seta) of the
pointer, we made all other variables
constant, so the certain structure of the
galvanometer to keep the area exposed
to the Q (flux) constant
\
To be XL and XC, it must be AC source as in the inductive inductance this
change in the voltage allow the inductor to make a voltage oppose the real
voltage of the circuit, and it is considered as a conserver as decrease the
current as it is AC allow the coil to unify its direction with the voltage source.
69-+2.20689
4 thin to
-We note the-+base
is very
allow more electrons to pass
without trapping more electrons
which pass then to make IB, so
as we decrease the thickness off
the base as the collector
intensity increase.
- The emitter has more
impurities than the collector as
the emitter is the source for the
collector.