Report about
Prepared by
Moaml sad daoud
Stage and division
First stage A
Supervised by
Dr. Muhammad Sattar
2025/4/9
Dr. Muhammad Hamza
1. Experiment name :
Oscilloscope device .
Figure 1: The oscilloscope device
2. The goal of the experiment
Scooping on the oscilloscope, which is considered one of the most important
devices for measuring and testing electronic circuits, as it enables us to see signals
and know their shape at multiple points in the circuit.
3. Tools used in the experiment :
Oscilloscope device .
Connecting wires for the oscilloscope .
4. Practical circuit :
The practical circuit consists of an oscilloscope device that measures the hand wave.
2
5.Theoretical calculations :
-3
F = 1/T = 1/20ms = 1/20*10 = 50 Hz
6. Results :
VPP
60v
VP
30v
F
50 Hz
T
20 ms
7. Conclusions :
Changing the wave size through the oscilloscope control buttons does not change
the value of the wave, but only changes its shape.
The oscilloscope can read more than one wavelength at the same time.
The wave can be stopped by pressing the stop button on the oscilloscope
3
8. Sources :
https://www.4electron.com/2014/02/569/
http://computerengineeringclass.itgo.com/What
%20does%20an%20oscilloscope%20do.htm
4
0
