Q/BZH 中海石油（中国）有限公司标准化文件 Q/BZH 11103.02-2021 Q/BZH 11203.02-2021 中国境内海上油气田通用技术规格书 管道材料等级 General technical specification for offshore oil and gas fields in China Piping material class 2021-12-30 发布 中海石油（中国）有限公司 2022-01-01 实施 发 布 发证检验机构第三方审查认证 《中国境内海上油气田通用技术规格书 管道材料等级》 文件编号：Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 发布时间：2021 年 12 月 30 日 中国船级社： 法国船级社： 挪威船级社： 美国船级社： III CONTENTS 1 SCOPE…………………………………………………………………………………………………… 1 2 DEFINITION……………………………………………………………………………………………… 1 3 APPLICABLE DOCUMENTS………………………………………………………………………….. 1 4 MATERIAL CLASS / SERVICE……………………………………………………………………… 2 5 ABBREVIATIONS……………………………………………………………………………………… 20 6 PIPE, FITTINGS AND VALVES REQUIREMENTS…………………………………………………21 7 PIPING MATERIAL CLASS INDEX…………………………………………………………………. 32 I Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 前 言 本标准化文件按照GB/T 1.1-2020《标准化工作导则 第1部分：标准的结构和编写》给出的规则起草。 本标准化文件由中海石油（中国）有限公司工程建设部提出并归口，属于公司标准化Ⅰ类文件。 本标准化文件起草单位：海洋石油工程股份有限公司。 本标准化文件主要起草人：单世超、郝文熙、王瑞英、陈鸿玉、李亚菲、马志刚、程明达、张光睿。 本标准化文件审核人：刘吉飞、郝孟江。 本标准化文件审定人：李志刚。 II General technical specification for offshore oil and gas fields in China Piping Material Class 1 SCOPE This specification specifies the piping materials and material minimum requirements to be used on the offshore production facilities. 2 DEFINITION Terminology Definition CLIENT CNOOC China Ltd. VENDOR Who will design, manufacture, inspection, test and deliver the products in accordance with all requisition, specifications, data sheets, MTO (Material Take Off)and other requirement of the order. SHALL Indicates a mandatory requirement. SHOULD Indicates a recommendation MAY Indicates one acceptable course of action for the supplier. 3 APPLICABLE DOCUMENTS 3.1 STANDARDS AND CODES The Contractor shall consider of the applicable standards and codes issued by the following associations and approval bodies as part of this specification. A list is given in Attachment A. 1) American Society of Mechanical Engineers (ASME) 2) American Petroleum Institute (API) 3) American Society for Testing and Materials (ASTM) 4) Manufactures Standardization Society of the Valve and Fittings Industry (MSS) 5) British Standards (BS) 6) Engineering Equipment and Materials Users Association (EEMUA) 7) International Organisation for Standardisation (ISO) 8) National Association of Corrosion Engineers (NACE) 3.2 Specifications 1 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 The following specifications shall apply to this specification Q/BZH 1103.001-2021 Specification for General Piping Q/BZH 1103.003-2021 Specification for Piping Thermal Insulation Q/BZH 1103.005-2021 Specification for Piping Inspection. Q/BZH 1103.004-2021 Specification for Piping Fabrication. Q/BZH 1103.009-2021 Specification for Valves Q/BZH 1103.008-2021 Calculation for Piping Wall Thickness. Q/BZH 1103.009-2021 Data Sheet for Valves. 3.3 Order of precedence The order of precedence of the codes and standards quoted in the specifications shall be: 1) International and local statutory regulations. 2) Project specifications and Project data sheets. 3) This Specification. 4) Referenced national and international codes. If any conflict occurred between these specifications and codes & standards, notes shall be submitted to Client for solution. 4 MATERIAL CLASS / SERVICE 4.1 SERVICE IDENTIFICATION TABLE 3.1-1: Service Identification CODE DESCRIPTION AG 伴生气 ASSOCIATED GAS AI 仪表空气 INSTRUMENT AIR AU 公用空气 UTILITY AIR AV 大气放空 ATMOSPHERIC VENT BD 释放（空） BLOWDOWN BG 密封气 BLANKET GAS BW 舱底水 BILGE WATER CI 化学药剂 CHEMICAL INJECTION CO 冷凝水 CONDENSING WATER CO2 二氧化碳 CARBON DIOXIDE GAS CR 原油 CRUDE OIL CS 含次氯酸钠的海水 CL HYPOCHLORITE SEA WATER DC 闭式排放 CLOSED DRAIN DO 开式排放 OPEN DRAIN EG 排气 EXHAUST GAS EW 乳化油 EMULSION FC 泡沫浓缩液 FOAM CONCENTRATE FD 柴油 DIESEL FUEL 2 CODE DESCRIPTION FF 消防泡沫 FIRE FOAM FG 燃料气 FUEL GAS FL 火炬放空 FLARE FM 七氟丙烷 HF-227ea FO 燃料油 FUEL OIL FW 消防水 FIRE WATER GC 天然气凝析油 GAS CONDENSATE GL 乙二醇 GLYCOL HG 高压气 HIGH PRESSURE GAS HM 热介质 HEATING MEDIUM HO 液压油 HYDRAULIC OIL HV 高压放空 HIGH PRESSURE VENT IG 惰性气体 INERT GAS JF 直升机燃料油 JET FUEL(HELICOPTER) LG 低压气 LOW PRESSURE GAS LO 润滑油 LUBRICATION OIL MEG 乙二醇 MONOETHYLENE GLYCOL N2 氮气 NITROGEN NG 天然气 NATURAL GAS PF 工艺流体 PROCESS FLUID PL 工艺液体(油) PROCESS LIQUID (OIL) PU 净化水 PURIFIED WATER PW 生产水 PRODUCED WATER SA 启动空气 START AIR SD 卫生（水）排放 SANITARY DRAIN ST 蒸汽 STEAM TEG 三甘醇 TRIETHYLENE GLYCOL UG 公用气 UTILITY GAS WB 黑水 BLACK WATER WC 冷却水 COOLING WATER WD 钻井水 DRILLING WATER WF 淡水 FRESH WATER WG 灰水 GRAY WATER WH 热水 HOT WATER WI 注入水 INJECTION WATER WK 压井液 WELL KILL FLUID WO 含油污水 OILY WATER WP 饮用水 POTABLE WATER WS 海水 SEAWATER WW 废水 WASTE WATER 4.1 4.1.1 PIPING CLASS DESIGNATOR SYSTEM Identification Of Piping Class 3 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 G G G G G G Specifical Requirements Corrosion/Erosion/Mechanical Allowance Detail material Main material Sub-devided of Pressure Rating Pressure Rating 4.1.2 Field Definitions Field Definitions First field： Pressure Rating, Indicated by Alphabetic “A、B、C…Z”. Second field： Sub-devide of Pressure Rating, Indicated by Numeric “0、1、2…9”. Third field： Main material, Indicated by Alphabetic “A、B、C…Z”. Forth field： Detail material Indicated by Alphabetic “A、B、C…Z”. Fifth field： Corrosion/Erosion/Mechanical Allowance, Indicated by Numeric “0、1、2…9”. Sixth field： Special Requirements, Indicated by Alphabetic “A、B、C…Z”. 4.1.2.1 Pressure Rating A ASME CL150 J API 5000psi S PN420 B ASME CL300 K API 10000psi T Spare C ASME CL400 L API 15000psi U Spare D ASME CL600 M API 20000psi V Spare E ASME CL900 N PN20 W Spare F ASME CL1500 O PN50 X Spare G ASME CL2500 P PN110 Y Spare H API 2000psi Q PN150 Z Spare I API 3000psi R PN260 —— —— 4 NOTES： a) ASME CL150~CL2500 as per ASME B16.5； b) API 2000psi~20000psi as per API 6A； c) PN20~PN420 as per HG/T 20615； 4.1.2.2 Sub-devided of Pressure Rating For subdivision of one specified Pressure rating, the numeric “0”means full rating piping class, the numeric “1”,“2”,“3”…means subdivision piping class Descendingly. For Non-metallic and Coper-Nickel alloy piping class, “1” means 16bar, “2” means 20bar. 4.1.2.3 Main Material A Alloy Steel J Spare S Stainless steel B Copper and Copper Alloy K Spare T Titanium and Titanium Alloy C Carbon Steel L Aliminum Alloy U Spare D Spare M Spare V Spare E Spare N Nickel and Nickel Alloy W Spare F Spare O Spare X Spare G Glass Reinforced plastics P Plastic Y Spare H Spare Q Spare Z Zirconium and Zirconium Alloy I Iron R Spare — —— 4.1.2.4 Detail Material 5 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 A—Alloy Steel Pipes seamless Pipe welded Fittings Forgings Castings A A333 Gr 3 A A671 CF71 A A420 WPL3 A A350 LF3 A A352 LC3 B A333 Gr 8 B —— B A420 WPL8 B A522 type I B —— C A335 P11 C C A234 WP11 C A182 F11 C D A335 P22 D D A234 WP22 D A182 F22 D E A519 Gr 4130 E —— E AISI 4130 E AISI 4130 E —— F A519 Gr 4135 F —— F AISI 4135 F AISI 4135 F —— G A519 Gr 4140 G —— G AISI 4140 G AISI 4140 G —— H Spare H Spare H Spare H Spare H Spare I Spare I Spare I Spare I Spare I Spare J Spare J Spare J Spare J Spare J Spare K Spare K Spare K Spare K Spare K Spare L Spare L Spare L Spare L Spare L Spare M Spare M Spare M Spare M Spare M Spare N Spare N Spare N Spare N Spare N Spare O Spare O Spare O Spare O Spare O Spare P Spare P Spare P Spare P Spare P Spare Q Spare Q Spare Q Spare Q Spare Q Spare R Spare R Spare R Spare R Spare R Spare S Spare S Spare S Spare S Spare S Spare T Spare T Spare T Spare T Spare T Spare U Spare U Spare U Spare U Spare U Spare V Spare V Spare V Spare V Spare V Spare W Spare W Spare W Spare W Spare W Spare X Spare X Spare X Spare X Spare X Spare 6 A691 1.25CR A691 2.25CR A217 WC6 A217 WC9 Y Spare Y Spare Y Spare Y Spare Y Spare Z Spare Z Spare Z Spare Z Spare Z Spare 7 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 B—Copper and Copper Alloy Pipes seamless A B C B466 C70600 B466 C71500 EEMUA234 C7060X Pipe welded A B C B467 C70600 B467 C71500 EEMUA234 C7060X Fittings Forgings Castings A C70600 A C70600 A B C71500 B C71500 B C EEMUA234 C7060X C EEMUA234 C7060X C B148 C95800 B148 C95800 B148 C95800 D Spare D Spare D Spare D Spare D Spare E Spare E Spare E Spare E Spare E Spare F Spare F Spare F Spare F Spare F Spare G Spare G Spare G Spare G Spare G Spare H Spare H Spare H Spare H Spare H Spare I Spare I Spare I Spare I Spare I Spare J Spare J Spare J Spare J Spare J Spare K Spare K Spare K Spare K Spare K Spare L Spare L Spare L Spare L Spare L Spare M Spare M Spare M Spare M Spare M Spare N Spare N Spare N Spare N Spare N Spare O Spare O Spare O Spare O Spare O Spare P Spare P Spare P Spare P Spare P Spare Q Spare Q Spare Q Spare Q Spare Q Spare R Spare R Spare R Spare R Spare R Spare S Spare S Spare S Spare S Spare S Spare T Spare T Spare T Spare T Spare T Spare U Spare U Spare U Spare U Spare U Spare V Spare V Spare V Spare V Spare V Spare W Spare W Spare W Spare W Spare W Spare X Spare X Spare X Spare X Spare X Spare Y Spare Y Spare Y Spare Y Spare Y Spare Z Spare Z Spare Z Spare Z Spare Z Spare 8 C—Carbon Steel Pipes seamless Pipe welded Fittings Forgings Castings A A106 Gr B A A672 C65 A A234 WPB A A105 A A216 WCB B A333 Gr.6 B A671 CC65 B A420 WPL6 B A350 LF2 B A352 LCC C API 5L Gr B C API 5L Gr B C A234 WPB C A105 C A216 WCB D API 5L X52 D API 5L X52 D D A694 F52 D A216 WCB E API 5L X60 E API 5L X60 E E A694 F60 E A216 WCB F API 5L X65 F API 5L X65 F F A694 F65 F A216 WCB G API 5L X70 G API 5L X70 G G A694 F70 G A216 WCB H API 5L X80 H HOLD H HOLD H HOLD H HOLD I API 5L X90 I HOLD I HOLD I HOLD I HOLD J API 5L X100 J HOLD J HOLD J HOLD J HOLD K API 5L X120 K HOLD K HOLD K HOLD K HOLD L Spare L Spare L Spare L Spare L Spare M Spare M Spare M Spare M Spare M Spare N Spare N Spare N Spare N Spare N Spare O Spare O Spare O Spare O Spare O Spare P Spare P Spare P Spare P Spare P Spare Q Spare Q Spare Q Spare Q Spare Q Spare R Spare R Spare R Spare R Spare R Spare S Spare S Spare S Spare S Spare S Spare T Spare T Spare T Spare T Spare T Spare U Spare U Spare U Spare U Spare U Spare V Spare V Spare V Spare V Spare V Spare W Spare W Spare W Spare W Spare W Spare X Spare X Spare X Spare X Spare X Spare Y Spare Y Spare Y Spare Y Spare Y Spare Z Spare Z Spare Z Spare Z Spare Z Spare A860 WPHY52 A860 WPHY60 A860 WPHY65 A860 WPHY70 9 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 G—Glass Reinforced Plastic Pipes seamless A B C D GRE (L3) GRE (Jet Fire) GRVE (L3) GRVE (Jet Fire) Pipe welded Fittings A —— A B —— B C —— C D —— D GRE (L3) GRE (Jet Fire) GRVE (L3) GRVE (Jet Fire) Forgings Castings A —— A —— B —— B —— C —— C —— D —— D —— E Spare E Spare E Spare E Spare E Spare F Spare F Spare F Spare F Spare F Spare G Spare G Spare G Spare G Spare G Spare H Spare H Spare H Spare H Spare H Spare I Spare I Spare I Spare I Spare I Spare J Spare J Spare J Spare J Spare J Spare K Spare K Spare K Spare K Spare K Spare L Spare L Spare L Spare L Spare L Spare M Spare M Spare M Spare M Spare M Spare N Spare N Spare N Spare N Spare N Spare O Spare O Spare O Spare O Spare O Spare P Spare P Spare P Spare P Spare P Spare Q Spare Q Spare Q Spare Q Spare Q Spare R Spare R Spare R Spare R Spare R Spare S Spare S Spare S Spare S Spare S Spare T Spare T Spare T Spare T Spare T Spare U Spare U Spare U Spare U Spare U Spare V Spare V Spare V Spare V Spare V Spare W Spare W Spare W Spare W Spare W Spare X Spare X Spare X Spare X Spare X Spare Y Spare Y Spare Y Spare Y Spare Y Spare Z Spare Z Spare Z Spare Z Spare Z Spare 10 I—Iron Pipes seamless Pipe welded Fittings Forgings Castings A Spare A Spare A Spare A Spare A Spare B Spare B Spare B Spare B Spare B Spare C Spare C Spare C Spare C Spare C Spare D Spare D Spare D Spare D Spare D Spare E Spare E Spare E Spare E Spare E Spare F Spare F Spare F Spare F Spare F Spare G Spare G Spare G Spare G Spare G Spare H Spare H Spare H Spare H Spare H Spare I Spare I Spare I Spare I Spare I Spare J Spare J Spare J Spare J Spare J Spare K Spare K Spare K Spare K Spare K Spare L Spare L Spare L Spare L Spare L Spare M Spare M Spare M Spare M Spare M Spare N Spare N Spare N Spare N Spare N Spare O Spare O Spare O Spare O Spare O Spare P Spare P Spare P Spare P Spare P Spare Q Spare Q Spare Q Spare Q Spare Q Spare R Spare R Spare R Spare R Spare R Spare S Spare S Spare S Spare S Spare S Spare T Spare T Spare T Spare T Spare T Spare U Spare U Spare U Spare U Spare U Spare V Spare V Spare V Spare V Spare V Spare W Spare W Spare W Spare W Spare W Spare X Spare X Spare X Spare X Spare X Spare Y Spare Y Spare Y Spare Y Spare Y Spare Z Spare Z Spare Z Spare Z Spare Z Spare 11 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 L—Aluminum Alloy Pipes seamless Pipe welded Fittings Forgings Castings A Spare A Spare A Spare A Spare A Spare B Spare B Spare B Spare B Spare B Spare C Spare C Spare C Spare C Spare C Spare D Spare D Spare D Spare D Spare D Spare E Spare E Spare E Spare E Spare E Spare F Spare F Spare F Spare F Spare F Spare G Spare G Spare G Spare G Spare G Spare H Spare H Spare H Spare H Spare H Spare I Spare I Spare I Spare I Spare I Spare J Spare J Spare J Spare J Spare J Spare K Spare K Spare K Spare K Spare K Spare L Spare L Spare L Spare L Spare L Spare M Spare M Spare M Spare M Spare M Spare N Spare N Spare N Spare N Spare N Spare O Spare O Spare O Spare O Spare O Spare P Spare P Spare P Spare P Spare P Spare Q Spare Q Spare Q Spare Q Spare Q Spare R Spare R Spare R Spare R Spare R Spare S Spare S Spare S Spare S Spare S Spare T Spare T Spare T Spare T Spare T Spare U Spare U Spare U Spare U Spare U Spare V Spare V Spare V Spare V Spare V Spare W Spare W Spare W Spare W Spare W Spare X Spare X Spare X Spare X Spare X Spare Y Spare Y Spare Y Spare Y Spare Y Spare Z Spare Z Spare Z Spare Z Spare Z Spare 12 N—Nickel and Nickel Alloy Pipes seamless A B B444 N06625 B444 N08825 Pipe welded A B B705 N06625 B705 N08825 Fittings A B B366 WPNCMC B366 WPNICMC Forgings A B B564 N06625 B564 N08825 Castings A B A494 CW-6MC A494 CU5MCUC C Spare C Spare C Spare C Spare C Spare D Spare D Spare D Spare D Spare D Spare E Spare E Spare E Spare E Spare E Spare F Spare F Spare F Spare F Spare F Spare G Spare G Spare G Spare G Spare G Spare H Spare H Spare H Spare H Spare H Spare I Spare I Spare I Spare I Spare I Spare J Spare J Spare J Spare J Spare J Spare K Spare K Spare K Spare K Spare K Spare L Spare L Spare L Spare L Spare L Spare M Spare M Spare M Spare M Spare M Spare N Spare N Spare N Spare N Spare N Spare O Spare O Spare O Spare O Spare O Spare P Spare P Spare P Spare P Spare P Spare Q Spare Q Spare Q Spare Q Spare Q Spare R Spare R Spare R Spare R Spare R Spare S Spare S Spare S Spare S Spare S Spare T Spare T Spare T Spare T Spare T Spare U Spare U Spare U Spare U Spare U Spare V Spare V Spare V Spare V Spare V Spare W Spare W Spare W Spare W Spare W Spare X Spare X Spare X Spare X Spare X Spare Y Spare Y Spare Y Spare Y Spare Y Spare Z Spare Z Spare Z Spare Z Spare Z Spare 13 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 P—Plastic Pipes seamless Pipe welded Fittings Forgings Castings A ABS A —— A ABS A —— A —— B HDPE B —— B HDPE B —— B —— C CPVC C —— C CPVC C —— C —— D PB D —— D PB D —— D —— E SRPE E —— E SRPE E —— E —— F Spare F Spare F Spare F Spare F Spare G Spare G Spare G Spare G Spare G Spare H Spare H Spare H Spare H Spare H Spare I Spare I Spare I Spare I Spare I Spare J Spare J Spare J Spare J Spare J Spare K Spare K Spare K Spare K Spare K Spare L Spare L Spare L Spare L Spare L Spare M Spare M Spare M Spare M Spare M Spare N Spare N Spare N Spare N Spare N Spare O Spare O Spare O Spare O Spare O Spare P Spare P Spare P Spare P Spare P Spare Q Spare Q Spare Q Spare Q Spare Q Spare R Spare R Spare R Spare R Spare R Spare S Spare S Spare S Spare S Spare S Spare T Spare T Spare T Spare T Spare T Spare U Spare U Spare U Spare U Spare U Spare V Spare V Spare V Spare V Spare V Spare W Spare W Spare W Spare W Spare W Spare X Spare X Spare X Spare X Spare X Spare Y Spare Y Spare Y Spare Y Spare Y Spare Z Spare Z Spare Z Spare Z Spare Z Spare 14 S—Stainless Steel Pipes seamless A B C D E F G H I J K L A312 TP316L 316/316L (dual) A312 TP304L 304/304L(dual) A312 TP310 A312 TP317L A312 TP321 A312 S31254 A790 S31803 A790 S32205 A790 S32750 A790 S32760 Pipe welded A B C D E F G H I J K L A358 Gr 316L 316/316L (dual) A358 Gr 304L 304/304L (dual) A358 Gr 310S A358 Gr 317L A358 Gr 321 A358 S31254 A928 S31803 A928 S32205 A928 S32750 A928 S32760 Fittings A B C D E F G H I J K L A403 WP316L 316/316L (dual) A403 WP304L 304/304L (dual) A403 WP310 A403 WP317L A403 WP321 A403 WP S31254 A815 S31803 A815 S32205 A815 S32750 A815 S32760 Forgings A B C D E F G H I J K L A182 F316L 316/316L (dual) A182 F304L 304/304L (dual) A182 F310 A182 F317L A182 F321 A182 F44 A182 F51 A182 F60 A182 F53 A182 F55 Castings A B C D A351 CF3M 316/316L (dual) A351 CF3 304/304L (dual) E —— F —— G H I J K L A351 CF8C A351 CK3MCuN A995 Gr 4A A995 Gr 4A A995 Gr 5A A995 Gr 6A M Spare M Spare M Spare M Spare M Spare N Spare N Spare N Spare N Spare N Spare O Spare O Spare O Spare O Spare O Spare P Spare P Spare P Spare P Spare P Spare Q Spare Q Spare Q Spare Q Spare Q Spare R Spare R Spare R Spare R Spare R Spare S Spare S Spare S Spare S Spare S Spare T Spare T Spare T Spare T Spare T Spare U Spare U Spare U Spare U Spare U Spare V Spare V Spare V Spare V Spare V Spare W Spare W Spare W Spare W Spare W Spare X Spare X Spare X Spare X Spare X Spare Y Spare Y Spare Y Spare Y Spare Y Spare Z Spare Z Spare Z Spare Z Spare Z Spare 15 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 T—Titanium and Titanium Alloy Pipes seamless Pipe welded Fittings Forgings Castings A B861 Gr 2 A B862 Gr 2 A B363 WPT2 A B381 F2 A B367 C2 B Spare B Spare B Spare B Spare B Spare C Spare C Spare C Spare C Spare C Spare D Spare D Spare D Spare D Spare D Spare E Spare E Spare E Spare E Spare E Spare F Spare F Spare F Spare F Spare F Spare G Spare G Spare G Spare G Spare G Spare H Spare H Spare H Spare H Spare H Spare I Spare I Spare I Spare I Spare I Spare J Spare J Spare J Spare J Spare J Spare K Spare K Spare K Spare K Spare K Spare L Spare L Spare L Spare L Spare L Spare M Spare M Spare M Spare M Spare M Spare N Spare N Spare N Spare N Spare N Spare O Spare O Spare O Spare O Spare O Spare P Spare P Spare P Spare P Spare P Spare Q Spare Q Spare Q Spare Q Spare Q Spare R Spare R Spare R Spare R Spare R Spare S Spare S Spare S Spare S Spare S Spare T Spare T Spare T Spare T Spare T Spare U Spare U Spare U Spare U Spare U Spare V Spare V Spare V Spare V Spare V Spare W Spare W Spare W Spare W Spare W Spare X Spare X Spare X Spare X Spare X Spare Y Spare Y Spare Y Spare Y Spare Y Spare Z Spare Z Spare Z Spare Z Spare Z Spare 16 Z—Zirconium and Zirconium Pipes seamless Pipe welded Fittings Forgings Castings A Spare A Spare A Spare A Spare A Spare B Spare B Spare B Spare B Spare B Spare C Spare C Spare C Spare C Spare C Spare D Spare D Spare D Spare D Spare D Spare E Spare E Spare E Spare E Spare E Spare F Spare F Spare F Spare F Spare F Spare G Spare G Spare G Spare G Spare G Spare H Spare H Spare H Spare H Spare H Spare I Spare I Spare I Spare I Spare I Spare J Spare J Spare J Spare J Spare J Spare K Spare K Spare K Spare K Spare K Spare L Spare L Spare L Spare L Spare L Spare M Spare M Spare M Spare M Spare M Spare N Spare N Spare N Spare N Spare N Spare O Spare O Spare O Spare O Spare O Spare P Spare P Spare P Spare P Spare P Spare Q Spare Q Spare Q Spare Q Spare Q Spare R Spare R Spare R Spare R Spare R Spare S Spare S Spare S Spare S Spare S Spare T Spare T Spare T Spare T Spare T Spare U Spare U Spare U Spare U Spare U Spare V Spare V Spare V Spare V Spare V Spare W Spare W Spare W Spare W Spare W Spare X Spare X Spare X Spare X Spare X Spare Y Spare Y Spare Y Spare Y Spare Y Spare Z Spare Z Spare Z Spare Z Spare Z Spare 17 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 Abbreviation： Abbreviation ABS CPVC GRE GRVE HDPE PB SRPE 4.1.2.5 0 0mm 1 0.5mm 2 1.5mm 3 3mm 4 4.5mm 5 Spare 6 6mm 7 Spare 8 Spare 9 Spare 4.1.2.6 Term Acrylonitrile-butadiene-styrene plastics Chlorinated Polyvinyl chloride Glass-fibre reinforced epoxy Glass-fibre reinforced vinyl ester High Density Polyethylene Polybutylene Steel Framed polythene plastic Corrosion/Erosion/Mechanical Allowance Special Requirements A 316L Cladding J Jacketed piping S Pipeline B S31803 Cladding K Spare T Tubing C N06625 Cladding L (-101℃＜t＜-29℃) U D N08825 Cladding M Cryogenic(≤-101℃) V E Coating Epoxy Resin N NACE Requirements（Sour) W (Class III) F Spare O Low Tempperature（Sour) X Spare G Galvanized P Coating Polyethylene Y Spare Low Temperature Classification Requirements (Class I) Classification Requirements (Class II) Classification Requirements NACE Requirements with High Temperature H (≥200℃) Q Spare Z No Special Requirements I Spare R Spare — —— 4.1.2.7 EXAMPLE: E0CA3Z： E--- Class 900 0--- FULL RATING C---CARBON STEEL A---A106 Gr. B 3--- 3mm CORROSION ALLOWANCE 18 Z--- NO SPECIAL REQUIREMENT 4.1.3 4.1.3.1 Material Requirements General requirements Asbestos containing shall not be accepted for all materials. Vendor shall submit supporting documents (Test reports, Certificates or Declaration of asbestos-free) All material shall be new and the interior and exterior surface shall be free of dirt, sand, debris and excessive rust. All piping material shall be heat treated in accordance with the applicable standard requirements or if specified in the engineering design. Post weld heat treatment (PWHT) shall be done in accordance with Para.331 of ASME B31.3. Impact test shall be performed as required by applicable ASTM material standard and Para. 323.2.2 of ASME B31.3. The minimum temperature without impact testing for carbon steel material shall conform to Figure 323.2.2A of ASME B31.3. If the design temperature is lower than minimum temperature without impact testing, impact testing or material substitution shall be carried out, and ASTM A333 Gr.6 substituting for ASTM A106 Gr.B and ASTM A420 WPL6 substituting for ASTM A234 WPB shall be given priority. Positive Alloy Material Identification (PAMI) shall be carried out 100% for every spec of all Stainless steel, Duplex stainless steel, Super duplex stainless steel and Copper-Nickel alloy including body and weld seams. All other requirement shall in accordance with Specification for Technical supply conditions. All galvanized piping material shall be supplied HOT DIPPED GALVANIZED to ASTM A123 Gr.85 and 100% inspected to ensure that internal passage have not been blocked or restricted. All of the fittings (wall thickness ＞ 25.4mm or Longitudinal seam fittings)which meet the requirements of para 19.3 of “Safety Rules for Offshore Fixed Platforms” shall be categorized as category B. The requirements for category B shall get qualification certificates from the certification agency. 4.1.3.2 Carbon steel The carbon content of carbon steel is limited to a maximum of 0.23% (ladle analysis). Maximum carbon content based on product/check analysis value can be increased by 0.02%. The carbon equivalent of carbon steel is limited to a maximum of 0.43% (ladle analysis) using the following formula: CE C Mn Cr Mo V Ni Cu 6 5 15 Acceptable C.E. value based on product/check analysis can be increased by 0.02%. All other requirement shall be in accordance with related specifications. For API 5L materials, shall be in line with Annex J PSL2 pipe ordered for offshore service. All other requirement shall be in accordance with related specifications. 4.1.3.3 Stainless steel The lowest grade of stainless steel for pressure containing body materials exposed to sea environment is grade 316SS, where 304SS series and lower grades shall not be used. 19 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 Unpainted 316L SS shall not be used for operating temperature above 60℃ due to chloride stress corrosion cracking. The material shall be solution annealed condition, fully pickled and passivated after manufacture. All other requirement shall be in accordance with related speification. 4.1.3.4 Duplex stainless steel (S31803) Unpainted duplex stainless steel shall not be used for operating temperature above 60℃，due to the risk of chloride stress corrosion cracking. All other requirement shall be in accordance with related speification. 4.1.3.5 Super Duplex stainless steel (S32750) Unpainted super duplex stainless steel shall not be used for operating temperature above 110℃，due to the risk of chloride stress corrosion cracking. All other requirement shall be in accordance with project Specification related specification. 4.1.3.6 Nonmetallic material CPVC/PE piping system All other requirement shall be in accordance with related specification. GRE piping system All other requirement shall be in accordance with related specification. SRPE piping system SRPE materials shall be used 50°C and below. SRPE materials shall be not used for FW system. All other requirement shall be in accordance with related specification. 4.1.3.7 Sour Service Requirements For sour service or H2S service materials shall be in accordance with NACE MR 0175/ISO 15156. 5 ABBREVIATIONS TABLE 5.0-1: Abbreviations 20 FF Flat Face RF Raised Face SMLS Seamless SCH Schedule THK. Thickness WN Weld Neck RED Reducer RTJ Ring Type Joint BB Bolted Bonnet SB Screwed Bonnet Gr. Grade SC Screwed Cover FS Forged Steel UB Union Bonnet FLG Flange UC Union Cover Hex Hexagon BC Bolt Cover STD Standard FP Full Port DP Design Pressure RP Reduced Port OD Outside Diameter NRS Non-rising Stem NPS Nominal Pipe Size MR Manufacture’s Recommend DT Design Temperature MS Manufacture’s Standard OS& Y Outside Screwed & Yoke HF Hard Faced With Stellite or Equivalent Material T&C Threaded & Coupled CON Concentric SP-W Spiral Wound IS&RS Inside Screw & Rising Stem SW Socket Weld DBB Double Block and Bleed CL Class NPT American National Pipe Thread BW Butt Weld PTFE Polytetrafluoroethylene GALV. Galvanized OP Operation Pressure ECC Eccentric OT Operation Temperature LT Low Temperature GRE Glassfiber Reinforced Epoxy XXS Double Extra Strong CA Corrosion Allowance MNPT Male NPT FNPT Female NPT BHN Brinell Hardness Number GRP Glass-reinforced plastics 6 PIPE, FITTINGS AND VALVES REQUIREMENTS 6.1 PIPE REQUIREMENTS This Specification tabulates piping material thicknesses which are based on the pipe schedules in the Q/BZH 1103.008-2021 “Calculation for Piping Wall Thickness”. All pipe and components materials shall have ±12.5% mill tolerance, if not specified. When size limitations preclude the availability of seamless pipe, substitution of electric fusion welded (EFW) pipe made from Plate with 100% radiography shall be permitted with written approval of the Client. Any other substitution shall be submitted to the Client for approval. Stainless steel pipe and tube shall be supplied in the solution annealed and picked condition. All carbon steel pipes shall be electric furnace (EF) or basic oxygen quality. If the calculated wall thickness is less than the minimum thickness, to maintain the mechanical strength requirement of pipe, the minimum thickness must be taken. For oil/gas treatment Carbon Steel piping, its value is shown in TABLE 5.1-1. TABLE 5.1-1: Minimum Thickness Limit MATERIAL Carbon Steel NPS 1/2” to 3” 4” and larger Min. THK SCH80 STD The Wall thickness is calculated by using the procedure of ASME B31.3. The Wall Thickness Calculation See: Q/BZH 1103.008-2021 “Calculation for Piping Wall Thickness”. The Wall thickness is calculated by using the procedure of ASME B31.1 (just for CO2 and FM200 system). The Wall Thickness Calculation See: Q/BZH 1103.008-2021 “Calculation for Piping Wall Thickness”. For CO2 system, the minimum wall thickness of the 1/2”and 3/4”pipe shall be SCH 40 and of the 21 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 1”through 4”pipe shall be SCH 80 according to the NFPA12. For CO2 and FM system, exclude the wall thickness calculation according to the ASME B31.1, other design shall be as per ASME B31.3 The wall thickness of nonmetallic piping class which materials exclude of ASME B31.3 should according to vendor’s information as per fluid and maximum temperature / pressure. 6.2 FITTINGS REQUIREMENTS Fitting material selection and identification shall be accomplished with the selection of a piping specification. The design conditions, basic materials for each specification, and specification numbering systems are described as below. 6.3 TEMPERATURE AND PRESSURE RANGES The rated conditions for a piping specification are generally based on the pressure ratings of the included flanges (pressure class and material) for a desired temperature range. The rated conditions will equal or exceed the design conditions for any piping service which utilizes the specification. Specification condition ranges are selected to utilize a material group without significantly increasing the cost of the components for any application. Flange pressure ratings are extracted from ASME B16.5 /ASME B16.47 for 150, 300, 600, 900, 1500 and 2500 class systems. For service design conditions, Maximum temperatures for any specification will be selected to at least equal the highest design temperature expected for a service utilizing the material group. 6.4 BOLTING Bolting materials specified for all piping specifications are according to applicable standards and design temperature ranges. Bolt dimensions are not included in this specification. Bolts dimension shall be in accordance with ASME B16.5 / ASME B16.47 / MSS SP-44 and API 6A for all standard flanges. Bolt dimension and lengths for special flanges shall be using manufacture’s calculation and drawings. Stud bolt length shall comply with ASME B16.5 / B16.47 or other standards excluding end points, and shall be lengthened by 0.25 in for diameter smaller than 1-1/4”; Stud bolts 1-1/4” diameter and over shall be lengthened by 1.5 bolt diameter to accommodate bolt torque or tensioning. And all stud bolt length shall be rounded up to the nearest 0.25 in. All bolts shall be threaded full length with continuous threads. Color of coating for bolts / nuts shall be difference with others as per classes of Attachment B. All carbon or low-alloyed nuts and bolting shall be coated by sherardizing with 50μm (Min.) and sealer coat. Sherardizing coating and test shall meet ASTM A1059 / A1059M as minimum requirements. All CRA, including stainless steel and duplex stainless steel nuts and bolting shall be coated by fluoropolymer. For Bolting coating shall be as per related specification 6.5 GASKETS Asbestos gasket materials shall not be used. 22 Gasket selection is identified in the individual specifications. In general, the following are the selections with regard to connection type: FF Compressed non-asbestos for general service per ASME B16.21 RF Spiral wound with Flexicarb filler, Flexitallic style CGI per ASME B16.20 RTJ Type R octagonal ring gaskets per ASME B16.20 Ring type joint gaskets shall be per ASME16.20 and shall be used for pressure classes CL900 and above. Spiral wound gaskets shall conform to all requirements of ASME B16.20 and be capable of mating with flanges of ASME B16.5 RTJ gaskets shall conform to hardness requirements as below. In any case, the joint ring shall have a hardness at least 20BHN (Brinell hardness number) lower than that of the flange ring groove. For gasket shall be as per related specification Gasket Material Max. hardness (BHN) Soft iron 90 A182 F316L(S31603) 160 6.6 FLANGES Flanges up to NPS 24” with pressure rating of class 150, 300 600, 900, 1500 and 2500(only upto NPS 12” for class 2500) shall conform to ASME B16.5. Flanges NPS 26” and larger with pressure rating of class 150, 300, 600 and 900 shall conform to ASME B16.47 A-type. Flanges NPS 22” with pressure rating of class 150, 300, and 600 shall conform to ASME B16.5 and class 900 shall conform to NORSOK L-005. Flanges over NPS 24” with pressure rating of class 1500 and over NPS 12” with pressure rating of class 2500 shall conform to NORSOK L-005. CU/NI Flanges shall be as per EEMUA 234. Class 150 steel flat face flanges shall be used for mating to cast iron and bronze body valves and equipment, and for mating to non-metallic piping flanges. When frequent severe temperature cycling is possible, ASME Class 150 flanges are not permitted if maximum temperature exceeds 176.67℃ (350℉). Slip-on flanges shall not be used for oil and gas system. The surface finish facings for raise face and flat face flanges shall have a 125 to 250 micro inch (3.2 to 6.3μm) roughness. The surface finish facing for ring joint face shall have a maximum 63 micro inch (1.6μm) roughness as per ASME B16.5. Orifice flanges shall have flange tapping in accordance with ASME B16.36 with 1/2” taps for Class 600 and smaller and 3/4” for Class 900 and above. Proprietary joints of the flanged and/or clamping types may be substituted for ASME B16.5 flanged joints in high pressure applications. 6.7 FITTINGS All butt-welded elbow shall be long radius if not stated. Normally 1.5 times diameter of NPS elbow is used unless otherwise stated. Miter Elbows shall not be permitted. Threaded and socket welded fittings shall conform to ASME B16.11 and shall be specified by the 23 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 following pressure classes. TABLE 5.7-1: Correlation of Fittings Class with Schedule Number or Wall Designation of Pipe for Calculation of Ratings Pipe Used for Rating Basis Class Designation of Fitting Type of Fitting 2000 Piping Class Limited for Rating Basis(Note1) Schedule No. Wall Designation Threaded - - 3000 Threaded 80/160 XS CL150~CL600 6000 Threaded - XXS CL900~CL1500 3000 Socket-welding 80 XS CL150~CL600 6000 Socket-welding 160 - CL900~CL1500 9000 Socket-welding - XXS Note： 1. Piping Class Limited for Rating Basic will be followed when pipe schedule other than listed in table. Taper threading shall conform to ASME B1.20.1. Unions shall conform to MSS-SP-83. Swage nipples shall conform to MSS-SP-95. Weld olet, Socket olet and thread olet shall conform to MSS-SP-97. Thread olet shall be used with ASME CL 300 and lower rating only (but for oil and gas system, thread olet cannot be used). 6.8 PIPE AND FITTING MARKINGS All pipes and fittings received and accepted shall be legibly marked in accordance with the applicable ASTM, API, ASME and MSS specification. 6.9 VALVES 6.9.1 VALVE IDENTIFICATION The detail for valve tagging system is shown in the below table: Valve Tagging system: Valve Type + Pressure Class + Body + Trim + End + Feature Type Pressure Class Body Trim End Feature B Ball A ASME CL 150 1 Carbon Steel A Alloy S Screw (FNPT) F Full Port G Gate B ASME CL 300 2 316 or 316L B 316/316L R Raised Face R Reduce port L Globe C ASME CL 400 3 13Cr C 316 or 316L F Flat Face W Wafer C Check D ASME CL 600 4 316/316L D PTFE J RTJ P Piston (Check)/ Pigging (Ball) N Needle E ASME CL 900 5 Nickel Aluminum Bronze E Duplex stainless Steel W Butt Weld U Lug Type 24 Valve Tagging system: Valve Type + Pressure Class + Body + Trim + End + Feature Type Pressure Class Body Trim F Butterfly F ASME CL 1500 6 Iron F Stellite X SW N Non-Slam (Check) T Three-way G ASME CL 2500 7 CPVC G Monel M Special End (Note 1) H High Temperature P Plug H API 2000psi 8 Duplex Stainless Steel H CPVC L Extension Type Y Y-Type (Globe) D Diaphragm I API 3000psi 9 Low Temperature N Carbon Steel Nickel Aluminum Bronze U Union E Eccentric J API 5000psi 10 Super Duplex S.S P Super Duplex S.S A Adhesive Bonded T Top Entry K API 10000psi 11 Hastelloy alloy B Special P Fusion Joint S Swing (Check) L API 15000psi 12 Hastelloy alloy C-276 M I IX Groove C Liner M ASME CL 125 13 Inconel 625 T A Angle-Type P O ASME CL 75 Atmosphere B N L D Lift (Check) DBB(Note 3) S API 602 CL 800 H I Fire Safe T U 16bar 20bar G Z K Q Galvanized Low Temperature 4.5mm CA 6.0mm CA NACE MR0175 /ISO15156 Subsea S Hastelloy alloy B Hastelloy alloy C-276 End T Feature Taper-Lok (Male) BW×FNPT RTJ×FNPT Clamp Connectors V X Notes: 1. For metal valve(＜2”) M means SW×NPT; For metal valve(≥2”) M means BW×RF/RTJ; For nonmetal valve M means Adhesive Bond×NPT. 2. For Carbon steel valve, min 3mm corrosion allowance (CA) shall be added to body wall thickness of 3．DBB type means “double block and bleed”. Example: O Extended Bonnets M Metal seated ASME B16.34 If not specified. BA1CRFI [Valve Type + Pressure Class + Body + Trim + End + Feature] B–Denotes valve type (B=ball valve) A–Denotes Pressure Class (A= ASME Class 150) 1–Denotes valve Body material (1= Carbon Steel) C–Denotes valve Trim material (C=Stainless Steel) R–Denotes valve facing (R=RF Flanges) F–Denotes special valve type (F=Full Port) I–Denotes special valve requirement (I=Fire safe) See DD-DDS-XXX-PI-1001 “DATA SHEET For VALVE” for the detail requirement for Valves. 25 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 6.9.2 General Requirements Valves shall meet the requirements of ASME B16.34 and related standards except where otherwise stated on related specification or datasheet (Q/BZH 1103.009-2021). Minimum body wall thickness does not cover up corrosion allowance. Additional corrosion allowance shall be added to the valve body thickness in corresponding piping class. The strength of the junction between the stem of a quarter-turn valve and its closure element (ball and disc) shall be sufficient to allow operation of the valve at the maximum design differential pressure with no permanent deformation of any part. All valves shall be marked in accordance with MSS-SP-25 and relevant standards. Flanged end valves which are outside screw & yoke (OS&Y) shall be provided with stem protectors. Inside screw (ISRS) valves and the union bonnet valves shall not be used. Screwed packing glands are prohibited. Use of cap screws for bonnet bolting is prohibited. Lifting pad/eyes shall be provided for valves weigh more than 250kg. Supports shall be fitted beneath the valves when specified. For the welding end valves, supplier should make a reasonable design for valve on-line repair and maintenance. All valves shall be anti-static with anti-blowout stem and self-relieving body cavity. All valves shall lockable in the fully open or fully closed position. Material selection of bolt / nuts and seats shall be checked and confirmed suitable for maximum design temperature / pressure by vendor. Where valve sizes are not defined in standards, the valve Supplier shall submit related design documents to the Client for review and approval step by step, including design calculation basis of end to end dimension, body wall thickness, stem diameter, bonnet thickness, minimum bolting requirements, and all other calculation pertaining to the final design of the valve. Seals containing with graphite shall not be used in applications where seawater wetting can occur. 6.9.3 Dimensions If not specified in the Item Description, the face to face or end-to-end dimension of other valves shall be in accordance with ASME B16.10 and/or relevant standards. However for valves with NPS ≤1 1/2” should be as per Manufactures Standard. 6.9.4 End Finish Valves ends may be flanged, butt weld, socket weld, threaded as indicated in the valve datasheet (Q/BZH 1103.009-2021). Butt weld ends shall be in accordance with ASME B 16.25 and ASME B16.34. Threaded ends shall have NPT threads in accordance with ASME B1.20.1 and ASME B16.34. Socket weld ends shall be in accordance with ASME B16.11 and ASME B16.34. The flange end shall be in accordance with ASME B16.5 / ASME B16.47 A series / API 6A / MSS SP 44. 6.9.5 26 Bolting Material Requirements 6.9.5.1 Internal (wetted bolting within valve) bolting shall have the same strength and corrosion grade with valve trim. 6.9.5.2 Body and Bonnet Bolting Unless otherwise specified in Valve Datasheet (Q/BZH 1103.009-2021), the selection of body and bonnet bolting shall be based on valve‘s body materials as below table: Valve Body Material Body & Bonnet Bolts/Nuts Material Carbon Steel A193 Gr. B7 / A194 Gr.2H (Note1) Low Temperature Carbon Steel A320 Gr. L7 / A194 Gr.7L (Note1,2) Stainless Steel A193 Gr. B8M CL2 / A194 Gr. 8M(Note3) Duplex Stainless Steel UNS32760(Note3,5) Copper Alloy A193 Gr. B8M CL2 / A194 Gr. 8M(Note3) Notes 1: Sherardizing or GALV.Plus PTFE Fluoropolymer Coating shall be provided, and coating shall meet the maximum temperature. 2: ASTM A194 Supplement requirement S3 (Low-Temperature Requirements) is required. 3:Zinc Plated Plus PTFE Fluoropolymer Coating shall be provided, and coating shall meet the minimum & maximum temperature. 4: In sour service or H2S service materials shall be in accordance with NACE MR 0175 / ISO 15156. 5: The bolting material could be updated to more advanced material (such as A453 Gr.660 B) based on analysis and calculating as full rating of ASME B16.34. 6.9.5.3 Unified inch screw threads shall be applied in accordance with ASME B1.1. 6.9.6 Gear operator requirements 6.9.6.1 General Gear operators shall be supplied as a minimum with all manually operated valves with a break-out torque exceeding 100 foot-pounds of force at ASME (or API) rated differential on a 24 inches maximum length lever (the distance used for calculating the torque shall be 22 inches). Gear operators shall be required, regardless of break-out torque, as follows unless noted otherwise. TABLE 5.9.7-1: Gear operator requirements Pressure Class Gate and Globe Valve (NPS) Ball Valve (NPS) Butterfly Valve (NPS) CL150 & CL300 14” and above 6” and above 8” and above CL600 12” and above 6” and above 6” and above CL900 & CL1500 10” and above 3” and above NA CL2500 8” and above 3” and above NA Additionally, butterfly valves which exert over 300 foot-pounds of torque at operating conditions shall have a gear operator. 6.9.7 6.9.7.1 Special valve requirements Ball valve (API 608, API 6D, ISO 17292, ASME B16.34) 27 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 Ball valves shall be furnished with the following features: Steel levers (NPS 2” and larger, flanged) Steel or ductile iron trip-proof (oval) handle (NPS 1 1/2” and smaller, threaded or socket-weld) Ball valves NPS 2” and larger shall have bolted or split body construction Valve design must have provision to prevent stem blowout All quarter-turn trunnion mounted ball valves shall have metal containment seats with thermoplastic insert, and emergency stem and seat sealant injection port or the Client approved equal Where valve sizes are not defined in API 6D and/or ASME B16.34, the valve Supplier shall be submitted to the Client for review and approval step by step, and design calculation basis of end to end dimension, body wall thickness, stem diameter, bonnet thickness, minimum bolting requirements, and all other calculation pertaining to the final design of the valve Ball valve should be long pattern if not specified Ball valves shall be reduced port unless identified on the tag number Further, the following shall serve as a guide in selecting the appropriate ball valve for the service TABLE 5.9.9-1 Ball Valve Service SCREWED OR CLASS 150-300 CLASS 600-2500 API 6A SOCKETWELD (3) FLANGED FLANGED 10000psi&15000psi 1/2” to 1 1/2” Floating Ball Floating Ball (1) Floating Ball (1) Trunnion mounted ball 2” to 4” N/A(2) Floating Ball Trunnion mounted Ball Trunnion mounted ball 6” and larger N/A(2) Trunnion mounted Ball Trunnion mounted Ball Trunnion mounted ball SIZE(NPS) Notes: (1) To be used only where special circumstances dictate the use of small flanged valves. (2) Not permitted (3) Socket weld valves shall be used for glycol, heating medium (hot oil) service. 13Cr socket weld valves shall not be used. 6.9.7.2 Gate valve (API 600 and 602, ASME B16.34, API 6A) Gate valves shall be furnished with the following features unless otherwise noted: 28 Steel hand-wheel (NPS 2” valves and larger, flanged) Bolted bonnets Adjustable packing OS&Y Hard faced Stellite #6 (or Client approved equal) seat and hard faced Stellite #6 (or Client approved equal) disc for class 600 and higher. When hard facing is specified, the base seating material shall be of corrosion resistance equal or better than the body material Back seating stems The solid wedge design is the first choice for valves up to NPS 2” All socket weld valves shall have high temperature packing design for heat generated during post weld heat treatment 6.9.7.3 Globe valves (applicable parts of API 600, 602, ASME B16.34, BS 1873, ISO 15761, API 6A) Globe valves shall be furnished with the following features unless otherwise noted. Steel or ductile iron hand-wheels Bolted bonnet Replaceable seat and discs Adjustable packing OS&Y Hard faced Stellite #6 (or Client approved equal) seat; and hard faced Stellite #6 (or Client approved equal) disc for Class 600 and higher. When hard facing is specified, the base seating material shall be of corrosion resistance equal or better than the body material Back seating stems All socket weld valves shall have high temperature packing design for heat generated during post weld heat treatment Globe valves that do not require bubble tight shut-off shall be metal to metal seated. Bubble tight shut-off applications shall employ disc type plugs with Teflon insert 6.9.7.4 Butterfly valves (API 609) High performance butterfly valves shall be furnished with the following features. PTFE seat rings Blowout proof shaft Full lug body design, and through hole is needed. Cam action seating, eccentric disc and offset shaft Lined (if required) 29 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 Width of the heads of seat retainer screws shall not occupy more than 50 percent of the seating width of API 601 spiral-wound gaskets 6.9.7.5 Check valves (API 6D, API 594, ISO15761, API 6A) Swing check valves shall be furnished with following features. Bolted bonnets Replaceable seats and discs Unless otherwise specified, the seat seal ring in all swing check valves shall be installed on the renewable seat facing instead of on the clapper facing Wafer check valves shall be furnished with following features. Bolted bonnets Replaceable seats and discs Unless otherwise specified, the seat seal ring in all wafer check valves shall be installed on the renewable seat facing instead of on the clapper facing Piston check valves shall be furnished with the following features. Non-slam piston Bolted bonnets Spiral wound gaskets 6.9.8 Valve tagging All valves shall be supplied with one permanently 316 S.S. nameplate riveted to the valves. Besides, one other 1.5” x3” x1mm 316 S.S. tag permanently secured with Φ1mm 316 S.S braided wire and clasp shall also be supplied. The tag shall have embossed in 3/8” inch high letters with 3/16” inch line spacing, this tagging shall be separated from any nameplate affixed to the valves. The tagging information shall conform to applicable codes and standards. Besides, valve number shall be marked on identification nameplate attached permanently on valves. 6.10 SPECTACLE BLIND, SPACER & BLANKS Spectacle Blind shall be used which weights not exceed 50kg. Use Spacer or Blanks if weight exceeds 50kg. The thickness of Spectacle Blind, Spacer & Blanks shall be as per ASME B16.48 plus corrosion allowance which specified in piping classes. 6.11 COATING PLASTIC Coating plastic (polyethylene or epoxy resin) and inspection shall meet CB/T 3366 as minimum requirements. Polyethylene coating thickness shall be 500~1000μm（dry film thickness）minimum. Epoxy resin coating thickness shall be 250~500μm（dry film thickness）minimum. 30 31 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 7 PIPING MATERIAL CLASS INDEX TABLE 7.0-1: Piping Material Class Index PIPING CLASS150 Item NO. Piping Class Pressure Class Material Design Condition Pressure (kPaG) 1600 10 640 50 1600 23 1000 50 SRPE (≥4”) 1350 50 GRE(≥2") (L3) 1600 50 0 GRE(≥3”)(Jet Fire) 1600 50 0 150 GRE(≥2”) (L3) 1760 50 0 150 GRE(≥3”)(Jet Fire) 1760 50 0 1960 -29~38 1580 150 1900 -29~38 1900 1760 1960 -29~38 50 -29~38 1580 150 1960 -29~38 1580 150 1960 -29~38 1580 150 1960 -29~38 1580 150 1. A1PB0Z 150 PE 2. A1PC0Z 150 CPVC 3. A1PE0Z 150 4. A1GA0Z 150 5. A1GB0Z 150 6. A2GA0Z 7. A2GB0Z 8. A0CA2G 150 Carbon Steel (GALV.) 9. A0CA3P 150 Carbon Steel (Coating polyethylene) Carbon Steel (Coating Epoxy Resin) 10. A0CA3E 150 11. A0CA3N 150 Carbon Steel (NACE MR0175 /ISO15156) 12. A0CA6N 150 Carbon Steel (NACE MR0175 /ISO15156) 13. A0CA3Z 150 Carbon Steel 14. A0CA6Z 150 Carbon Steel 15. A0AA3L 150 Low Temperature Alloy Steel 16. A0AA6L 150 Low Temperature Alloy Steel 17. A0AA3O 150 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 1960 -101~38 1580 150 18. A0AA6O 150 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 1960 -101~38 1580 150 19. A0SA0L 150 Stainless Steel 20. A0SA0N 150 21. A0SA0O 22. 1960 -101~38 1580 150 1960 -101~38 1580 150 1590 -101~38 1200 150 Stainless Steel (NACE MR0175 /ISO15156) 1590 -29~38 1200 150 150 Stainless Steel (NACE MR0175 /ISO15156) 1590 -101~38 1200 150 A0SA0Z 150 Stainless Steel 1590 -29~38 1200 150 23. A0SI0N 150 Duplex Stainless Steel (NACE MR0175 /ISO15156) 2000 -29~38 1580 150 24. A0SI0Z 150 Duplex Stainless Steel 2000 -29~38 1580 150 25. A0SK0N 150 Super Duplex Stainless Steel (NACE MR0175 /ISO15156) 2000 -29~38 1580 150 26. A0SK0Z 150 Super Duplex Stainless Steel 2000 -29~38 27. A1BA1Z 150 90Cu/10Ni 28. A2BA1Z 150 90Cu/10Ni 1580 1500 1500 1900 1760 150 50 50 -29~38 50 32 C.A. (mm) Temperature (℃) 0 0 0 1.5 3 3 3 6 3 6 3 6 3 6 0 0 0 0 0 0 0 0 0.5 0.5 PIPING CLASS 300 Item NO. Piping Class Pressure Class Material Design Condition Pressure (kPaG) 5110 Temperature (℃) -29~38 4510 150 29. B0CA2G 300 Carbon Steel (GALV.) 30. B0CA3H 300 Carbon Steel 31. B0CA3N 300 Carbon Steel (NACE MR0175 /ISO15156) 32. B0CA6N 300 Carbon Steel (NACE MR0175 /ISO15156) 5110 -29~38 4510 150 33. B0CA3Z 300 Carbon Steel 34. B0CA6Z 300 Carbon Steel 35. B0AA3L 300 Low Temperature Alloy Steel 36. B0AA6L 300 Low Temperature Alloy Steel 37. B0AA3O 300 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 5110 -101~38 4510 150 38. B0AA6O 300 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 5110 -101~38 4510 150 39. B0SA0L 300 Stainless Steel 40. B0SA0N 300 Stainless Steel (NACE MR0175 /ISO15156) 41. B0SA0O 300 Stainless Steel (NACE MR0175 /ISO15156) 4140 -101~38 3140 150 42. B0SA0Z 300 Stainless Steel 43. B0SI0N 300 Duplex Stainless Steel (NACE MR0175 /ISO15156) 44. B0SI0Z 300 Duplex Stainless Steel 45. B0SK0N 300 Super Duplex Stainless Steel (NACE MR0175 /ISO15156) 46. B0SK0Z 300 Super Duplex Stainless Steel 5110 -29~38 4190 250 5110 -29~38 4510 150 5110 -29~38 4510 150 5110 -29~38 4510 150 5110 -101~38 4510 150 5110 -101~38 4510 150 4140 -101~38 3140 150 4140 -29~38 3140 150 4140 -29~38 3140 150 5170 -29~38 4590 150 5170 -29~38 4590 150 5170 -29~38 4590 150 5170 -29~38 4590 150 C.A. (mm) 1.5 3 3 6 3 6 3 6 3 6 0 0 0 0 0 0 0 0 33 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 PIPING CLASS 600 Item NO. Piping Class Pressure Class Material Design Condition Pressure (kPaG) 10210 Temperature (℃) -29~38 9020 150 Carbon Steel (NACE MR0175 /ISO15156) 10210 -29~38 9020 150 600 Carbon Steel (NACE MR0175 /ISO15156) 10210 -29~38 9020 150 D0CA3Z 600 Carbon Steel 10210 -29~38 9020 150 51. D0CA6Z 600 Carbon Steel 10210 -29~38 9020 150 52. D0AA3L 600 Low Temperature Alloy Steel 10210 -101~38 9020 150 53. D0AA6L 600 Low Temperature Alloy Steel 10210 -101~38 9020 150 54. D0AA3O 600 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 10210 -101~38 9020 150 55. D0AA6O 600 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 10210 -101~38 9020 150 56. D0SA0L 600 Stainless Steel 57. D0SA0N 600 58. D0SA0O 59. 47. D0CA2G 600 Carbon Steel (GALV.) 48. D0CA3N 600 49. D0CA6N 50. 8270 -101~38 6280 150 Stainless Steel (NACE MR0175 /ISO15156) 8270 -29~38 6280 150 600 Stainless Steel (NACE MR0175 /ISO15156) 8270 -101~38 6280 150 D0SA0Z 600 Stainless Steel 8270 -29~38 6280 150 60. D0SI0N 600 Duplex Stainless Steel (NACE MR0175 /ISO15156) 10340 -29~38 9190 150 61. D0SI0Z 600 Duplex Stainless Steel 10340 -29~38 9190 150 62. D0SK0N 600 Super Duplex Stainless Steel (NACE MR0175 /ISO15156) 10340 -29~38 9190 150 63. D0SK0Z 600 Super Duplex Stainless Steel 10340 -29~38 9190 150 34 C.A. (mm) 1.5 3 6 3 6 3 6 3 6 0 0 0 0 0 0 0 0 PIPING CLASS 900 Item NO. Piping Class Pressure Class Material Design Condition Pressure (kPaG) 64. E0CA3N 900 Carbon Steel (NACE MR0175 /ISO15156) 15320 Temperature (℃) -29~38 13520 150 65. E1CA3N 900 Carbon Steel (NACE MR0175 /ISO15156) 12700 -29~38 12700 150 66. E0CA6N 900 Carbon Steel (NACE MR0175 /ISO15156) 15320 -29~38 13520 150 67. E1CA6N 900 Carbon Steel (NACE MR0175 /ISO15156) 12700 -29~38 12700 150 68. E0CA3Z 900 Carbon Steel 69. E1CA3Z 900 Carbon Steel 70. E0CA6Z 900 Carbon Steel 71. E1CA6Z 900 Carbon Steel 72. E0CF3N 900 High Strength Carbon Steel (NACE MR0175 /ISO15156) 73. E1CF3N 900 High Strength Carbon Steel (NACE MR0175 /ISO15156) 12700 -29~38 12700 150 74. E0CF6N 900 High Strength Carbon Steel (NACE MR0175 /ISO15156) 15320 -29~38 13520 150 75. E1CF6N 900 High Strength Carbon Steel (NACE MR0175 /ISO15156) 12700 -29~38 12700 150 76. E0CF3Z 900 High Strength Carbon Steel 77. E1CF3Z 900 High Strength Carbon Steel 78. E0CF6Z 900 High Strength Carbon Steel 79. E1CF6Z 900 High Strength Carbon Steel 80. E0AA3L 900 Low Temperature Alloy Steel 81. E1AA3L 900 Low Temperature Alloy Steel 82. E0AA6L 900 Low Temperature Alloy Steel 83. E1AA6L 900 Low Temperature Alloy Steel 84. E0AA3O 900 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 85. E1AA3O 900 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 12700 -101~38 12700 150 86. E0AA6O 900 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 15320 -101~38 13520 150 87. E1AA6O 900 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 12700 -101~38 12700 150 88. E0SA0L 900 Stainless Steel 89. E1SA0L 900 Stainless Steel 90. E0SA0N 900 Stainless Steel (NACE MR0175 /ISO15156) 91. E1SA0N 900 Stainless Steel (NACE MR0175 /ISO15156) 10300 -29~38 9420 150 15320 -29~38 13520 150 12700 -29~38 12700 150 15320 -29~38 13520 150 12700 -29~38 12700 150 15320 -29~38 13520 150 15320 -29~38 13520 150 12700 -29~38 12700 150 15320 -29~38 13520 150 12700 -29~38 12700 150 15320 -101~38 13520 150 12700 -101~38 12700 150 15320 -101~38 13520 150 12700 -101~38 12700 150 15320 -101~38 13520 150 12410 -101~38 9420 150 10300 -101~38 9420 150 12410 -29~38 9420 150 C.A. (mm) 3 3 6 6 3 3 6 6 3 3 6 6 3 3 6 6 3 3 6 6 3 3 6 6 0 0 0 0 35 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 Item NO. Piping Class Pressure Class Material Design Condition 92. E0SA0O 900 Stainless Steel (NACE MR0175 /ISO15156) 12410 Temperature (℃) -101~38 9420 150 93. E1SA0O 900 Stainless Steel (NACE MR0175 /ISO15156) 10300 -101~38 9420 150 94. E0SA0Z 900 Stainless Steel 12410 -29~38 9420 150 95. E1SA0Z 900 Stainless Steel 10300 -29~38 9420 150 96. E0SI0N 900 Duplex Stainless Steel (NACE MR0175 /ISO15156) 15510 -29~38 13780 150 97. E1SI0N 900 Duplex Stainless Steel (NACE MR0175 /ISO15156) 12900 -29~38 12900 150 98. E0SI0Z 900 Duplex Stainless Steel 15510 -29~38 13780 150 99. E1SI0Z 900 Duplex Stainless Steel 12900 -29~38 12900 150 100. E0SK0N 900 Super Duplex Stainless Steel (NACE MR0175 /ISO15156) 15510 -29~38 13780 150 101. E1SK0N 900 Super Duplex Stainless Steel (NACE MR0175 /ISO15156) 12900 -29~38 12900 150 102. E0SK0Z 900 Super Duplex Stainless Steel 15510 -29~38 13780 150 103. E1SK0Z 900 Super Duplex Stainless Steel 12900 -29~38 12900 150 36 Pressure (kPaG) C.A. (mm) 0 0 0 0 0 0 0 0 0 0 0 0 PIPING CLASS 1500 Item NO. Piping Class Pressure Class Material Design Condition Pressure (kPaG) 104. F0CA3N 1500 Carbon Steel (NACE MR0175 /ISO15156) 25530 Temperature (℃) -29~38 22540 150 105. F1CA3N 1500 Carbon Steel (NACE MR0175 /ISO15156) 22100 -29~38 22100 150 106. F2CA3N 1500 Carbon Steel (NACE MR0175 /ISO15156) 18700 -29~38 18700 150 107. F0CA6N 1500 Carbon Steel (NACE MR0175 /ISO15156) 25530 -29~38 22540 150 108. F1CA6N 1500 Carbon Steel (NACE MR0175 /ISO15156) 22100 -29~38 22100 150 109. F2CA6N 1500 Carbon Steel (NACE MR0175 /ISO15156) 18700 -29~38 18700 150 110. F0CA3Z 1500 Carbon Steel 111. F1CA3Z 1500 Carbon Steel 112. F2CA3Z 1500 Carbon Steel 113. F0CA6Z 1500 Carbon Steel 114. F1CA6Z 1500 Carbon Steel 115. F2CA6Z 1500 Carbon Steel 116. F0CF3N 1500 High Strength Carbon Steel (NACE MR0175 /ISO15156) 117. F1CF3N 1500 High Strength Carbon Steel (NACE MR0175 /ISO15156) 22100 -29~38 22100 150 118. F2CF3N 1500 High Strength Carbon Steel (NACE MR0175 /ISO15156) 18700 -29~38 18700 150 119. F0CF6N 1500 High Strength Carbon Steel (NACE MR0175 /ISO15156) 25530 -29~38 22540 150 120. F1CF6N 1500 High Strength Carbon Steel (NACE MR0175 /ISO15156) 22100 -29~38 22100 150 121. F2CF6N 1500 High Strength Carbon Steel (NACE MR0175 /ISO15156) 18700 -29~38 18700 150 122. F0CF3Z 1500 High Strength Carbon Steel 123. F1CF3Z 1500 High Strength Carbon Steel 124. F2CF3Z 1500 High Strength Carbon Steel 125. F0CF6Z 1500 High Strength Carbon Steel 126. F1CF6Z 1500 High Strength Carbon Steel 127. F2CF6Z 1500 High Strength Carbon Steel 128. F0AA3L 1500 Low Temperature Alloy Steel 129. F1AA3L 1500 Low Temperature Alloy Steel 130. F2AA3L 1500 Low Temperature Alloy Steel 131. F0AA6L 1500 Low Temperature Alloy Steel 25530 -29~38 22540 150 22100 -29~38 22100 150 18700 -29~38 18700 150 25530 -29~38 22540 150 22100 -29~38 22100 150 18700 -29~38 18700 150 25530 -29~38 22540 150 25530 -29~38 22540 150 22100 -29~38 22100 150 18700 -29~38 18700 150 25530 -29~38 22540 150 22100 -29~38 22100 150 18700 -29~38 18700 150 25530 -29~38 22540 150 22100 -29~38 22100 150 18700 -29~38 18700 150 25530 -29~38 22540 150 C.A. (mm) 3 3 3 6 6 6 3 3 3 6 6 6 3 3 3 6 6 6 3 3 3 6 6 6 3 3 3 6 37 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 Item NO. Piping Class Pressure Class Material Design Condition Pressure (kPaG) 22100 Temperature (℃) -29~38 22100 150 18700 -29~38 18700 150 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 25530 -29~38 22540 150 1500 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 22100 -29~38 22100 150 F2AA3O 1500 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 18700 -29~38 18700 150 137. F0AA6O 1500 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 25530 -29~38 22540 150 138. F1AA6O 1500 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 22100 -29~38 22100 150 139. F2AA6O 1500 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 18700 -29~38 18700 150 140. F0SA0L 1500 Stainless Steel 20680 -101~38 15700 150 141. F1SA0L 1500 Stainless Steel 17900 -101~38 15700 150 142. F2SA0L 1500 Stainless Steel 15100 -101~38 15100 150 143. F0SA0N 1500 Stainless Steel (NACE MR0175 /ISO15156) 20680 -29~38 15700 150 144. F1SA0N 1500 Stainless Steel (NACE MR0175 /ISO15156) 17900 -29~38 15700 150 145. F2SA0N 1500 Stainless Steel (NACE MR0175 /ISO15156) 15100 -29~38 15100 150 146. F0SA0O 1500 Stainless Steel (NACE MR0175 /ISO15156) 20680 -101~38 15700 150 147. F1SA0O 1500 Stainless Steel (NACE MR0175 /ISO15156) 17900 -101~38 15700 150 148. F2SA0O 1500 Stainless Steel (NACE MR0175 /ISO15156) 15100 -101~38 15100 150 149. F0SA0Z 1500 Stainless Steel 20680 -29~38 15700 150 150. F1SA0Z 1500 Stainless Steel 17900 -29~38 15700 150 151. F2SA0Z 1500 Stainless Steel 15100 -29~38 15100 150 152. F0SI0N 1500 Duplex Stainless Steel (NACE MR0175 /ISO15156) 25860 -29~38 22960 150 153. F1SI0N 1500 Duplex Stainless Steel (NACE MR0175 /ISO15156) 22400 -29~38 22400 150 154. F2SI0N 1500 Duplex Stainless Steel (NACE MR0175 /ISO15156) 18900 -29~38 18900 150 155. F0SI0Z 1500 Duplex Stainless Steel 25860 -29~38 22960 150 156. F1SI0Z 1500 Duplex Stainless Steel 22400 -29~38 22400 150 157. F2SI0Z 1500 Duplex Stainless Steel 18900 -29~38 18900 150 158. F0SK0N 1500 Super Duplex Stainless Steel (NACE MR0175 /ISO15156) 25860 -29~38 22960 150 159. F1SK0N 1500 Super Duplex Stainless Steel (NACE MR0175 /ISO15156) 22400 -29~38 22400 150 160. F2SK0N 1500 Super Duplex Stainless Steel 18900 -29~38 132. F1AA6L 1500 Low Temperature Alloy Steel 133. F2AA6L 1500 Low Temperature Alloy Steel 134. F0AA3O 1500 135. F1AA3O 136. 38 C.A. (mm) 6 6 3 3 3 6 6 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Item NO. Piping Class Pressure Class Material Design Condition Pressure (kPaG) (NACE MR0175 /ISO15156) 161. F0SK0Z 1500 Super Duplex Stainless Steel 162. F1SK0Z 1500 Super Duplex Stainless Steel 163. F2SK0Z 1500 Super Duplex Stainless Steel C.A. (mm) Temperature (℃) 18900 150 25860 -29~38 22960 150 22400 -29~38 22400 150 18900 -29~38 18900 150 0 0 0 39 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 PIPING CLASS 2500 Item NO. Piping Class Pressure Class Material Design Condition 164. G0CA3N 2500 Carbon Steel (NACE MR0175 /ISO15156) 42550 Temperature (℃) -29~38 37560 150 165. G1CA3N 2500 Carbon Steel (NACE MR0175 /ISO15156) 36800 -29~38 36800 150 166. G2CA3N 2500 Carbon Steel (NACE MR0175 /ISO15156) 31200 -29~38 31200 150 167. G0CA6N 2500 Carbon Steel (NACE MR0175 /ISO15156) 42550 -29~38 37560 150 168. G1CA6N 2500 Carbon Steel (NACE MR0175 /ISO15156) 36800 -29~38 36800 150 169. G2CA6N 2500 Carbon Steel (NACE MR0175 /ISO15156) 31200 -29~38 31200 150 170. G0CA3Z 2500 Carbon Steel 42550 -29~38 37560 150 171. G1CA3Z 2500 Carbon Steel 36800 -29~38 36800 150 172. G2CA3Z 2500 Carbon Steel 31200 -29~38 31200 150 173. G0CA6Z 2500 Carbon Steel 42550 -29~38 37560 150 174. G1CA6Z 2500 Carbon Steel 36800 -29~38 36800 150 175. G2CA6Z 2500 Carbon Steel 31200 -29~38 31200 150 176. G0CF3N 2500 High Strength Carbon Steel (NACE MR0175 /ISO15156) 42550 -29~38 37560 150 177. G1CF3N 2500 High Strength Carbon Steel (NACE MR0175 /ISO15156) 36800 -29~38 36800 150 178. G2CF3N 2500 High Strength Carbon Steel (NACE MR0175 /ISO15156) 31200 -29~38 31200 150 179. G0CF6N 2500 High Strength Carbon Steel (NACE MR0175 /ISO15156) 42550 -29~38 37560 150 180. G1CF6N 2500 High Strength Carbon Steel (NACE MR0175 /ISO15156) 36800 -29~38 36800 150 181. G2CF6N 2500 High Strength Carbon Steel (NACE MR0175 /ISO15156) 31200 -29~38 31200 150 182. G0CF3Z 2500 High Strength Carbon Steel 42550 -29~38 37560 150 183. G1CF3Z 2500 High Strength Carbon Steel 36800 -29~38 36800 150 184. G2CF3Z 2500 High Strength Carbon Steel 31200 -29~38 31200 150 185. G0CF6Z 2500 High Strength Carbon Steel 42550 -29~38 186. 187. G1CF6Z G2CF6Z 2500 2500 Pressure (kPaG) High Strength Carbon Steel High Strength Carbon Steel 188. G0AA3L 2500 Low Temperature Alloy Steel 189. G1AA3L 2500 Low Temperature Alloy Steel 190. G2AA3L 2500 Low Temperature Alloy Steel 191. G0AA6L 2500 Low Temperature Alloy Steel 40 37560 150 36800 -29~38 36800 150 31200 -29~38 31200 150 42550 -29~38 37560 150 36800 -29~38 36800 150 31200 -29~38 31200 150 42550 -29~38 37560 150 C.A. (mm) 3 3 3 6 6 6 3 3 3 6 6 6 3 3 3 6 6 6 3 3 3 3 3 3 6 Item NO. Piping Class Pressure Class Material Design Condition Pressure (kPaG) 36800 Temperature (℃) -29~38 36800 150 31200 -29~38 31200 150 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 42550 -29~38 37560 150 2500 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 36800 -29~38 36800 150 G2AA3O 2500 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 31200 -29~38 31200 150 197. G0AA6O 2500 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 42550 -29~38 37560 150 198. G1AA6O 2500 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 36800 -29~38 36800 150 199. G2AA6O 2500 Low Temperature Alloy Steel (NACE MR0175 /ISO15156) 31200 -29~38 31200 150 200. G0SA0L 2500 Stainless Steel 34470 -101~38 26160 150 201. G1SA0L 2500 Stainless Steel 29800 -101~38 26160 150 202. G2SA0L 2500 Stainless Steel 25200 -101~38 25200 150 203. G0SA0N 2500 Stainless Steel (NACE MR0175 /ISO15156) 34470 -29~38 26160 150 204. G1SA0N 2500 Stainless Steel (NACE MR0175 /ISO15156) 29800 -29~38 26160 150 205. G2SA0N 2500 Stainless Steel (NACE MR0175 /ISO15156) 25200 -29~38 25200 150 206. G0SA0O 2500 Stainless Steel (NACE MR0175 /ISO15156) 34470 -101~38 26160 150 207. G1SA0O 2500 Stainless Steel (NACE MR0175 /ISO15156) 29800 -101~38 26160 150 208. G2SA0O 2500 Stainless Steel (NACE MR0175 /ISO15156) 25200 -101~38 25200 150 209. G0SA0Z 2500 Stainless Steel 34470 -29~38 26160 150 210. G1SA0Z 2500 Stainless Steel 29800 -29~38 26160 150 211. G2SA0Z 2500 Stainless Steel 25200 -29~38 25200 150 212. G0SI0N 2500 Duplex Stainless Steel (NACE MR0175 /ISO15156) 43090 -29~38 -29~38270 150 213. G1SI0N 2500 Duplex Stainless Steel (NACE MR0175 /ISO15156) 37300 -29~38 37300 150 214. G2SI0N 2500 Duplex Stainless Steel (NACE MR0175 /ISO15156) 31600 -29~38 31600 150 215. G0SI0Z 2500 Duplex Stainless Steel 216. G1SI0Z 2500 Duplex Stainless Steel 217. G2SI0Z 2500 Duplex Stainless Steel 218. G0SK0N 2500 Super Duplex Stainless Steel (NACE MR0175 /ISO15156) 43090 -29~38 -29~38270 150 219. G1SK0N 2500 Super Duplex Stainless Steel (NACE MR0175 /ISO15156) 37300 -29~38 37300 150 220. G2SK0N 2500 Super Duplex Stainless Steel (NACE MR0175 /ISO15156) 31600 -29~38 31600 150 192. G1AA6L 2500 Low Temperature Alloy Steel 193. G2AA6L 2500 Low Temperature Alloy Steel 194. G0AA3O 2500 195. G1AA3O 196. 43090 -29~38 -29~38270 150 37300 -29~38 37300 150 31600 -29~38 31600 150 C.A. (mm) 6 6 3 3 3 6 6 6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 41 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 Item NO. Piping Class Pressure Class Material 221. G0SK0Z 2500 Super Duplex Stainless Steel 222. G1SK0Z 2500 Super Duplex Stainless Steel 223. G2SK0Z 2500 Super Duplex Stainless Steel 42 Design Condition Pressure (kPaG) 43090 Temperature (℃) -29~38 -29~38270 150 37300 -29~38 37300 150 31600 -29~38 31600 150 C.A. (mm) 0 0 0 ATTACHMENT A STANDARDS AND CODES AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME) ASME B31.3 Process Piping ASME B31.1 Power Piping ASME B16.5 Pipe Flanges and Flanged Fittings (NPS 1/2” through NPS 24”) ASME B16.9 Factory-Made Wrought Steel Buttwelding Fittings ASME B16.10 Face-to-face and End-to-end Dimensions of Ferrous Valves ASME B16.11 Forged Fittings—Socket-Welding and Threaded ASME B16.20 Metallic Gaskets for Pipe Flanges—Ring-Joint, Spiral-Wound, and Jacketed ASME B16.34 Valves- Flanged, Threaded, and Welding End ASME B36.10M Welded and Seamless Wrought Steel Pipe ASME B36.19M Stainless Steel Pipe ASME B16.21 Nonmetallic Flat Gaskets for pipe Flanges ASME B16.47 Large Diameter Steel Flanges (NPS 26” Through NPS 60”) ASME B16.48 Line Blanks AMERICAN PETROLEUM INSTITUTE (API) API STD 594 Wafer and Wafer-Lug Check Valves API STD 598 Valve Inspection and Testing API STD 600 Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries API STD 602 Steel Gate, Globe and Check Valves for Sizes DN100 and Smaller for the Petroleum and Natural Gas Industries API STD 607 Fire Test for Soft-Seated Quarter-Turn Valves API STD 608 Metal Ball Valves-Flanged, Threaded, and Butt-Welding End API STD 609 Butterfly Valves: Double Flanged Lug- and Wafer-Type API SPEC 6D Petroleum and Natural Gas Industries Pipeline Transportation systems-Pipeline Valves API RP 14E Recommended Practice for Design and Installation of Offshore Production Platform Piping Systems API RP 5L Specification for Line Pipe API SPEC 6A Specification for Wellhead and Christmas Tree Equipment API SPEC 6FA Specification for Fire Test for Valves 43 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 MANUFACTURERS STANDARDIZATION SOCIETY OF THE VALVE AND FITTINGS INDUSTRY INC. MSS-SP-25 Standard Marking System for Valves, Fittings, Flanges and Unions MSS-SP-44 Steel Pipeline Flanges MSS-SP-83 Class 3000 Steel Pipe Unions Socket-Welding and Threaded MSS-SP-95 Swage (d) Nipples and Bull Plugs MSS-SP-97 Integrally Reinforced Forged Branch Outlet Fittings, Socket Welding, Threaded and Buttwelding Ends AMERICAN SOCIETY FOR TESTING AND MATERIALS ASTM Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and A53/A53M Seamless. ASTM Carbon Steel Forgings for Piping Applications. A105/A105M ASTM Seamless Carbon Steel Pipe for High Temperature Service. A106/A106M A123/A123M Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products. ASTM Standard Specification for Zinc Coating (Hot dip) on Iron and Steel Hardware. ASTM A153/A153M ASTM Forged or Rolled Alloy Steel Pipe Flanges, Forged Fittings and Valves and A182/A182M Parts for High Temperature Service. ASTM Alloy Steel and Stainless Steel Bolting Materials for High Temperature Service. A193/A193M ASTM Carbon and Alloy Steel Nuts for Bolts for High Pressure and High Temperature A194/A194M Service. ASTM Standard Specification for Steel Castings, Carbon, Suitable for Fusion A216/A216M Welding, for High- Temperature Service. ASTM Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High A234/A234M Temperature service. ASTM Seamless, Welded and Heavily Cold Worked Austenitic Stainless Steel Pipes. A312/A312M ASTM Alloy Steel and Stainless Steel Bolting Materials for Low Temperature Service. A320/A320M ASTM A333/A333M 44 Seamless and Welded Steel Pipe for Low Temperature Service. ASTM Carbon and Low Alloy Steel Forgings Requiring Notch Toughness Testing for A350/ A350M Piping Components. ASTM Specification for Steel Castings, Austenitic, Austenitic-Ferritic (Duplex), for A351/ A351M Pressure-Containing Parts. ASTM Standard Specification for Steel Castings, Ferritic and Martensitic, for A352/A352M Pressure-Containing Parts Suitable for Low-Temperature Service. ASTM Electric Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for A358/A358M High-Temperature Service and General application. ASTM A370 Test Methods and Definitions for Mechanical Testing of Steel Products. ASTM Wrought Austenitic Stainless Steel Piping Fittings. A403/A403M ASTM Pipe Fittings of Wrought Carbon Steel and Alloy Steel for Low Temperature A420/A420M Service. ASTM Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures A671/671M ASTM A672/672M Specification for Electric-Fusion- Welded Steel Pipe for High Pressure Service at Moderate Temperatures. A694/A694M Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves and Parts for High Pressure Transmission Service. ASTM Seamless and Welded Ferritic / Austenitic Stainless Steel Pipe. ASTM A790/A790M ASTM A815/A815M Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings. A928/A928M Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded With Addition of Filler. ASTM Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for A995/995M Pressure-Containing Parts. ASTM Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel 1059/A1059M Fasteners, Hardware, and Other Products. ASTM B117 Standard Practice for Operating Salt Spray (Fog) Apparatus. ASTM B148 Specification for Aluminum-Bronze Sand Castings. ASTM Specification for Aluminum Bronze Rod, Bar, and Shapes. ASTM B150/B150M ASTM Specification for Copper-Nickel-Zinc B151/B151M Copper-NickelRod and Bar. Alloy (Nickel Silver) and 45 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 ASTM Seamless Copper-Nickel Pipe and Tube. B466/B466M ASTM B467 Standard specification for welded Copper-Nickel Pipe. ASTM D1784 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds. ASTM E562 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count. ASTM F436 Standard Specification for Hardened Steel Washers. ASTM F439 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80. ASTM Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe, F441/F441M Schedule 40 and 80. BRITISH STANDARD (BS) BS 1873 Specification for Steel globe and globe stop and check valves(flanged and butt-welding ends)for the petroleum, petrochemical and allied industries BS EN 10204 Metallic products—types of inspection documents INTERNATINAL ORGANIZATION FOR STANDARDIZATION (ISO) ISO 17292 Metal Ball Valves for Petroleum, Petrochemical and Allied Industries NACE MR0175 Petroleum and natural gas industries-Materials for use in H2S-containing /ISO 15156 environments in oil and gas production ISO 15761 Steel Gate, Globe and Check Valves for Sizes DN100 and Smaller, for the Petroleum and Natural Gas Industries ISO 14692 Petroleum and Natural Gas Industries—Glass-Reinforced Plastics(GRP) Piping The Engineering Equipment and Materials Users Association(EEMUA) EEMUA 234 90/10 Copper nickel alloy piping for offshore applications Specification CHINA STANDARDS CB/T 3366 Technical requirements of coating plastic for steel pipe HG/T 3690 Steel framed polyethylene plastic pipes for industry HG/T 3691 Fittings of steel framed polyethylene plastic pipes for industry 46 1. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A1PB0Z Service To be specified Piping Class: A1PB0Z Material PE ASME B16.5 Pressure Class: 150 NDT - Corrosion Allowance: 0mm Design Pressure / Temperature Design Temperature(℃) -40~10 Design Pressure（kPaG） 1600 Design Code 20 30 40 50 60 1250 1000 740 640 540 ASME B31.3 Size(NPS) 1/2” 3/4” 1” 1 1/2” 2” 3” 4” 6” Size(OD) 20mm 25mm 32mm 50mm 63mm 90mm 110mm 160mm Pipe THK Material Advised by vendor (Note2) PE3408, ASTM D3350 Class 345464C, PE, 16bar Fittings Elbow, Tee Reducer Electro fusion joint Type PE PE3408, ASTM D3350 Class 345464C, Electro fusion joint, 16bar Union PE3408, ASTM D3350 Class 345464C, Electro fusion joint, 16bar Coupling PE3408, ASTM D3350 Class 345464C, Electro fusion joint, 16bar Plug, Cap PE3408, ASTM D3350 Class 345464C, Electro fusion joint, 16bar Flange adaptor PE3408, ASTM D3350 Class 345464C, Electro fusion joint-FF, 16bar Flanges A105, coated PP-GF30 or equivalent, FF, CL 150, ASME B16.5 Blind Flange PE3408, ASTM D 3350 Class 345464C, FF, CL 150, ASME B16.5 Valves Manufacture Standard Ball Valve BA5NFRI / BA5NFFI Butterfly Valve FA5NFWE Check Valve CA5NFW Gate Valve GA5NF Globe Valve LA5NF Needle Valve Gaskets Bolt/Nuts: NA5NF 3mm thickness, NBR (Nitrile Butadiene Rubber) Rubber Sheet Gasket Combined Cloths With Shore A Durometer Hardness Of 55 To 60, CL 150, FF, ASME B16.21 A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts with two F436 TYPE I washers, Sherardizing coating. Notes: (1) PE Installation shall be in accordance with vendor’s recommendations. (2) PE pipe and fitting wall thickness shall be provided by vendor and shall meet the 16bar rating system as a minimum requirement. (3) The bolt torque and bolt tighten procedure requirement to be advised by PE vendor. (4) Flame spread test shall be done for PE pipe, fitting, etc as per ASTM D635/IMO A.653/IMO 2010 FTP, related certificate shall be provided by PE vendor. (5) All of PE piping and fittings shall be certificated by third party as DNVGL, ABS, LR, BV or CCS, type approval certificates shall be submitted by vendor. (6) PE100 substituted PE 3408 is acceptable. (7) The P-T rating refers GF, AGRU, and Weixing PE100 material data, and should be confirmed with manufacture furtherly. 47 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 2. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A1PC0Z Service To be specified Material CPVC NDT Piping Class: - A1PC0Z ASME B16.5 Pressure Class: 150 Corrosion Allowance: 0mm Design Pressure / Temperature Design Temperature(℃) 0~23 48 50 60 Design Pressure（kPaG） 1600 1040 1000 800 Design Code ASME B31.3 Size(NPS) 1/2” 3/4” 1” 1 1/2” 2” 3” 4” 6” Size(OD) 21.3mm 26.7mm 33.4mm 48.3mm 60.3mm 88.9mm 101.6mm 168.3mm Pipe THK Material Advised by vendor (Note2) CPVC ASTM D 1784, Class 23447, ASTM F441, PE, 16bar Fittings Elbow, Tee Reducer Socket Cement Joint Type CPVC CPVC ASTM D 1784 Class 23447, ASTM F439, Solvent Cement Joint, 16bar Union CPVC ASTM D 1784 Class 23447, ASTM F439, Solvent Cement Joint, 16bar Plug, Cap CPVC ASTM D 1784 Class 23447, ASTM F439, MNPT, 16bar Adaptor Union (Note3) CPVC ASTM D 1784 Class 23447, ASTM F439, Solvent Cement Joint x MNPT, 16bar Flanges CPVC ASTM D 1784 Class 23447, Solvent Cement Joint-FF, CL 150, ASME B16.5 Blind Flange CPVC ASTM D 1784 Class 23447, FF, CL 150, ASME B16.5 Valves Manufacture Standard Ball Valve BT7HA / BT7HM BT7HF Butterfly Valve - FA7HFW Check Valve CT7HAP/ CT7HMP CT7HFW Gate Valve - GT7HF Globe Valve LA12TF / LA5NF (Note6) LT7HF Needle Valve NA12TF / NA5NF (Note6) - Gaskets Bolt/Nuts: 3mm thickness, NBR (Nitrile Butadiene Rubber) Rubber Sheet Gasket Combined Cloths, CL 150, FF, ASME B16.21 A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts with two F436 TYPE I washers, Sherardizing coating. Notes: (1) CPVC Installation shall be in accordance with vendor’s recommendations. (2) CPVC pipe and fitting wall thickness shall be provided by vendor and shall meet the 16bar rating system as a minimum requirement. (3) The adaptor unions shall be used to connect the thread end valves and CPVC pipe. (4) The bolt torque and bolt tighten procedure requirement to be advised by CPVC vendor. (5) Flame spread test shall be done for CPVC pipe, fitting, etc as per ASTM D635/IMO A.653/IMO 2010 FTP, related certificate shall be provided by CPVC vendor. (6) LA12TF/LA12TFshall be selected when CS service is generated by Hypochlorite Generator skid. LA5TF/NA5NFcould be selected when CS service is generated by Cu-Al Electrolyzer skid. (7) All of CPVC piping and fittings shall be certificated by third party as DNV, ABS, LR, BV or CCS, type approval certificates shall be submitted by vendor. (8) The P-T rating refers GF material data. 48 3. ATTACHMENT B Service To be specified Material SRPE NDT PIPING SYSTEM SPECIFICATIONS A1PE0Z Piping Class: - A1PE0Z ASME B16.5 Pressure Class 150 Corrosion Allowance: 0mm Design Pressure / Temperature Design Temperature(℃) 20 50 Design Pressure（kPaG） 1600 Size Design Code ASME B31.3 1350 1/2”-3” 2"-20"(Note 5) Pipe THK Advised by vendor (Note1) Material SRPE (Framed with Q235B, GALV.), 16bar, HG/T 3690 Fittings Electro fusion joint Type Fittings: Elbow, Tee, Reducer Flange joints SRPE (Framed with Q235B, GALV.), 16bar, HG/T 3691 Electro fusion Couplers Flange See A2BA1Z With Back Ring Blind Flange A105 Coating Polyethylene / Epoxy, CL 150, FF, ASME B16.5 (Note2, 7) A105 Coating Polyethylene / Epoxy, CL 150, FF, ASME B16.5 (Note2) Valves ASME B16.34 CL 150 Ball Valve BA5NFRI / BA5NFFI Butterfly Valve FA5NFWE(<16” )/ FA5NFWUE(≥16” ) (Note6) Check Valve CA5NFW/CA5NFS Gate Valve GA5NF Globe Valve LA5NF Gasket Bolt/Nuts 3mm thickness, NBR（Nitrile Butadiene Rubber）Rubber Sheet Gasket Combined Cloths, Shore A Durometer Hardness of 55 to 60, CL 150, FF, ASME B16.21 A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts with two F436 TYPE I washers, Sherardizing coating. Notes: (1) Pressure rating for all of SRPE materials shall be 16bar as a minimum requirement. (2) Flanges, back rings and blinds shall be coated meet offshore environment. (3) Vendor shall provide bolt length, bolt torque tables and certified dimensional drawings. (4) For the pipe 3" and below using class A2BA1Z. (5) 2”and 3” is only used to connect branch. (6) The butterfly valve shall endure 0.8Mpa back pressure minimum. Lug hole shall be through hole without threads. (7) The back ring shall be supplied with flange. (8) Requirements of SRPE materials shall meet HG/T 3690/3691. Testing and inspection reports shall be submitted. 49 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 4. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A1GA0Z Service To be specified Material GRE(L3) NDT Piping Class: - A1GA0Z ASME B16.5 Pressure Class 150 Corrosion Allowance: 0mm Design Pressure / Temperature Design Temperature(℃) -29~50 Design Pressure（kPaG） 1600 Size Design Code ASME B31.3 2”-3” (Note5) 4”-6” 8”-10” 12”-14” 16”-24” Pipe THK Advised by vendor (Note1) Material GRE, ASTM D2310 / D2996, Bell x Spigot, 16bar, L3 fire resistance Fittings GRE Filament Wound Fittings: 26”-40” Elbow, Tee, Reducer Coupling, Nipple GRE,ASTM D5685 / D1599, Bell x Spigot, 16bar, L3 fire resistance Saddle(Note9) Grounding Saddle Flange GRE, Heavy Duty Hubless, ASTM D5421 / D4024, FF, (Note11) CL 150, L3 fire resistance, ASME B16.5 GRE, ASTM D5421 / D4024, FF, Blind Flange (Note11) CL 150, L3 fire resistance, ASME B16.5 Valves(Note11) ASME B16.34 CL 150 Ball Valve BA5NFRI / BA5NFFI Butterfly Valve FA5NFWE (<16”) / FA5NFWUE (≥16”) (Note8) Check Valve CA5NFW/CA5NFN Gate Valve - Globe Valve LA5NF 3mm thickness, NBR（Nitrile Butadiene Rubber）Rubber Sheet Gasket Combined Cloths, Shore A Durometer Gasket Hardness of 55 to 60, CL 150, FF, ASME B16.21(Note 6) 3mm thickness, Non-asbestos Fire Resisting Material With Shore A Durometer Hardness Of 55 To 60, CL 150, FF, ASME B16.21.(Note 7) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts with two F436 TYPE I washers, Sherardizing coating. Notes: (1) GRE piping calculation design shall be as per ISO 14692 for a 25 year design life. (2) GRE piping shall be fire resistant type and meet ISO 14692 ST.IF.EB/030 Grade requirements. (3) All GRE piping materials, fabrication and operation shall be in accordance with ISO 14692. (4) For the pipe 3” and below using class A2BA1Z. (5) 2”and 3” is only used to connect branch. (6) Only used for WS, WG, WB, WW system. (7) Only used for FW (fire water) system. (8) The butterfly valve shall endure 0.8Mpa back pressure minimum. Lug hole shall be through hole without threads. (9) For 1 1/2” and below branches, the saddle with 90Cu/10Ni thread bushings will be used. For 2” branches, the saddle with flange will be used. (10) Saddle can be used only for connection with instrument, drain & vent valve closure. (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 50 5. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS A1GB0Z Piping Class: To be specified Material GRE(Jet Fire) NDT - A1GB0Z ASME B16.5 Pressure Class 150 Corrosion Allowance: 0mm Design Pressure / Temperature Design Temperature(℃) Design Code -29~50 ASME B31.3 Design Pressure（kPaG） 1600 Size 2” -3”(Note5) 4”-6” 8”-10” 12”-14” 16”-24” Pipe THK Advised by vendor (Note1) Material GRE, ASTM D2310 / D2996, Bell x Spigot, 16bar, Jet Fire resistance Fittings GRE Filament Wound Fittings: 26”-40” Elbow, Tee, Reducer GRE, ASTM D5685 / D1599, Bell x Spigot, 16bar, Jet Fire resistance Grounding Saddle Flange GRE, Heavy Duty Hubless, ASTM D5421 / D4024, FF, (Note7) CL 150, Jet Fire resistance, ASME B16.5 Blind Flange GRE, ASTM D5421 / D4024, FF, CL 150, Jet Fire resistance, ASME B16.5 (Note7) Valves(Note7) ASME B16.34 CL 150 Ball Valve BA5NFRI / BA5NFFI Butterfly Valve FA5NFWE (<16”) / FA5NFWUE (≥16”) (Note6) Check Valve CA5NFW Gate Valve GA5NF Globe Valve LA5NF Gasket Bolt/Nuts 3mm thickness, Non-asbestos Fire Resisting Material With Shore A Durometer Hardness Of 55 To 60, CL 150, FF, ASME B16.21 A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts with two F436 TYPE I washers, Sherardizing coating. Notes: (1) GRE piping calculation design shall be as per ISO 14692 for a 25 year design life. (2) GRE piping for dry firewater systems shall meet ISO 14692 DF.JF.EC/030 Grade requirements. (3) All GRE piping materials, fabrication and operation shall be in accordance with ISO 14692. (4) For the pipe 3” and below using class A2BA1Z. (5) 2” and 3” is only used to connect branch. (6) The butterfly valve shall endure 0.8Mpa back pressure minimum. Lug hole shall be through hole without threads. (7)Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 51 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 6. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A2GA0Z Service To be specified Material GRE(L3) NDT Piping Class: - A2GA0Z ASME B16.5 Pressure Class 150 Corrosion Allowance: 0mm Design Pressure / Temperature Design Temperature(℃) Design Code -29~50 ASME B31.3 Design Pressure（kPaG） 1800 Size 2” -3”(Note5) 4”-6” 8”-10” 12”-14” 16”-24” Pipe THK Advised by vendor (Note1) Material GRE, ASTM D2310 / D2996, Bell x Spigot, 20bar, L3 fire resistance Fittings GRE Filament Wound Fittings: 26”-40” Elbow, Tee, Reducer Coupling, Nipple GRE,ASTM D5685 / D1599, Bell x Spigot, 20bar, L3 fire resistance Saddle(note9) Grounding Saddle Flange GRE, Heavy Duty Hubless, ASTM D5421 / D4024, FF, (Note11) CL 150, L3 fire resistance, ASME B16.5 Blind Flange (Note11) GRE, ASTM D5421 / D4024, FF, CL 150, L3 fire resistance, ASME B16.5 Valves(Note11) ASME B16.34 CL 150 Ball Valve BA5NFRI / BA5NFFI Butterfly Valve FA5NFWE (<16”) / FA5NFWUE (≥16”) (Note8) Check Valve CA5NFW/CA5NFN Gate Valve - Globe Valve LA5NF 3mm thickness, NBR（Nitrile Butadiene Rubber）Rubber Sheet Gasket Combined Cloths, Shore A Durometer Gasket Hardness of 55 to 60, CL 150, FF, ASME B16.21 (Note 6) 3mm thickness, Non-asbestos Fire Resisting Material With Shore A Durometer Hardness Of 55 To 60, CL 150, FF, ASME B16.21.(Note 7) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts with two F436 TYPE I washers, Sherardizing coating. Notes: (1) GRE piping calculation design shall be as per ISO 14692 for a 25 year design life. (2) GRE piping shall be fire resistant type and meet ISO 14692 ST.IF.EB/030 Grade requirements. (3) All GRE piping materials, fabrication and operation shall be in accordance with ISO 14692. (4) For the pipe 3” and below using class A2BA1Z. (5) 2” and 3” is only used to connect branch. (6) Only used for WS, WG, WB, WW system. (7) Only used for FW (fire water) system. (8) The butterfly valve shall endure 0.8Mpa back pressure minimum. Lug hole shall be through hole without threads. (9) For 1 1/2” and below branches, the saddle with 90Cu/10Ni thread bushings will be used. For 2” branches, the saddle with flange will be used. (10) Saddle can be used only for connection with instrument, drain & vent valve closure. (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 52 7. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS A2GB0Z Piping Class: To be specified Material GRE(Jet Fire) NDT - A2GB0Z ASME B16.5 Pressure Class 150 Corrosion Allowance: 0mm Design Pressure / Temperature Design Temperature(℃) -29~50 Design Pressure（kPaG） 1800 Size Design Code ASME B31.3 2” -3”(Note5) 4”-6” 8”-10” 12”-14” 16”-24” Pipe THK Advised by vendor (Note1) Material GRE, ASTM D2310 / D2996, Bell x Spigot, 20bar, Jet Fire resistance Fittings GRE Filament Wound Fittings: 26”-40” Elbow, Tee, Reducer GRE, ASTM D5685 / D1599, Bell x Spigot, 20bar, Jet Fire resistance Grounding Saddle Flange GRE, Heavy Duty Hubless, ASTM D5421 / D4024, FF, (Note7) CL 150, Jet Fire resistance, ASME B16.5 Blind Flange GRE, ASTM D5421 / D4024, FF, CL 150, Jet Fire resistance, ASME B16.5 (Note7) Valves(Note7) ASME B16.34 CL 150 Ball Valve BA5NFRI / BA5NFFI Butterfly Valve FA5NFWE (<16”) / FA5NFWUE (≥16”) (Note6) Check Valve CA5NFW Gate Valve GA5NF Globe Valve LA5NF Gasket Bolt/Nuts 3mm thickness, Non-asbestos Fire Resisting Material With Shore A Durometer Hardness Of 55 To 60, CL 150, FF, ASME B16.21 A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts with two F436 TYPE I washers, Sherardizing coating. Notes: (1) GRE piping calculation design shall be as per ISO 14692 for a 25 year design life. (2) GRE piping for dry firewater systems shall meet ISO 14692 DF.JF.EC/030 Grade requirements. (3) All GRE piping materials, fabrication and operation shall be in accordance with ISO 14692. (4) For the pipe 3” and below using class A2BA1Z. (5) 2” and 3” is only used to connect branch. (6) The butterfly valve shall endure 0.8Mpa back pressure minimum. Lug hole shall be through hole without threads. (7) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 53 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 8. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A0CA2G Service To be specified Material Carbon Steel (GALV.) NDT Piping Class: A0CA2G ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 150 3 (For 1/2"&3/4") Corrosion and Machnical 3.5(For 1",1 1/2"&2") Allowance: 1.5(For 3" and above) Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -29 38 50 100 150 200 Design Pressure (kPaG) 1960 1960 1920 1770 1580 1380 Size 1/2"-1-1/2" 2" Pipe THK SCH 80 Material ASTM A106 Gr. B SMLS, PE, GALV., ASME B36.10M Fittings Forged Fittings: Elbow, Tee, Reducer A105, CL 3000,NPT,GALV., ASME B16.11 Sockolet - Weldolet - Threadolet A105, CL 3000,NPT, GALV., MSS-SP-97 Union A105, CL 3000,ST-ST, NPT, GALV., MSS-SP-83 Coupling A105, CL 3000,NPT, GALV., ASME B16.11 Cap A105, CL 3000,NPT, GALV., ASME B16.11 Plug A105, NPT, GALV., ASME B16.11 Spectacle Blind, Spacer & Blanks ASME B31.3 3" 4 "-10" 12"-24" SCH 80 SCH 40 STD ASTM A106 Gr. B SMLS, BE, GALV., ASME B36.10M(Note2) Butt Weld Fittings: (Note1, 2) A234 Gr. WPB, BW, GALV., ASME B16.9 A105, BW, GALV.MSS-SP-97 - A105, CL 150,RF, GALV., ASME B16.48 Flange A105 CL 150,NPT-RF, GALV., ASME B16.5 Blind Flange A105, CL 150, RF, GALV., ASME B16.5 A105 CL 150, WN-RF, GALV., ASME B16.5 (Note1, 2) Valves API 602 CL 800 ASME B16.34 CL 150 Ball Valve BS2CSI BA1CRRGI / BA1CRFGI Butterfly Valve - - Check Valve CS2CSP CA1CRWG / CA1CRSG Gate Valve GS2CS GA1CRG Globe Valve LS2CS LA1CRG Needle Valve NS2CS - Gasket 4.5mm thickness,spiral wound gasket with 316L S.S inner&outer ring, CL 150, RF, ASME B16.20 Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall be matched pipe thickness. (2) Hot dip galvanization after fabrication for welding pipe and fittings. 54 9. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A0CA3P Service To be specified Material Carbon Steel (Coating Polyethylene) NDT Piping Class: Refer to Specification of Piping Inspection A0CA3P ASME B16.5 Pressure Class 150 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 50 Design Pressure (kPaG) 1900 1900 1760 Size 1/2"-3" Pipe THK Material Design code ASME B31.3 2"-3" (Note 4) 4"-10" 12"-24" 26”-48” SCH 80 SCH 40 STD (Note 8) A106 Gr. B, SMLS, BE, Coating Polyethylene, ASME B36.10M, (Note 2) Fittings Butt Weld Fittings: (Note1, 2) Elbow , Tee, A234 Gr. WPB, BW, Coating Polyethylene, ASME B16.9 Reducer Sockolet - Weldolet A105, BW, Coating Polyethylene, MSS-SP-97 Threadolet - Coupling - Spectacle Blind, A105, CL 150, FF, Coating Polyethylene, ASME B16.48 See A2BA1Z Spacer & Blanks A105, CL 150, WN-FF, Coating Polyethylene, ASME B16.5 Flange(Note9) (Note1,2,3) Blind Flange A105, CL 150, FF, Coating Polyethylene, ASME B16.5 (Note2,3) (Note9) Valves(Note9) ASME B16.34 CL 150 Ball Valve BA5NFRI / BA5NFFI Butterfly Valve FA5NFWE(<16” )/ FA5NFWUE(≥16” ) (Note7) Check Valve CA5NFW/CA5NFS Gate Valve GA5NF Globe Valve LA5NF Needle Valve 3mm thickness, Non-asbestos Fire Resisting Material With Shore A Durometer Hardness Of 55 To 60, CL 150, FF, ASME B16.21 (Note5) Gasket 3mm thickness, NBR（Nitrile Butadiene Rubber）Rubber Sheet Gasket Combined Cloths, Shore A Durometer Hardness of 55 to 60, CL 150, FF, ASME B16.21 Bolt/Nuts (Note6) A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) Piping shall be coated Polyethylene inside after fabrication and inspection as per CB/T 3366. (3 All of sharp angles including flange inner rectangles shall be rounded before coating Polyethylene. (4) 2" & 3" are only used to connect branch. (5) Only used for FW, FF. (6) Only used for WS. (7) The butterfly valve shall endure 0.8Mpa back pressure minimum. Lug hole shall be through hole without threads. (8) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” STD STD 30” 32” 34” 36” 38” XS 40” 42” 44” 46” 48” 13mm 14mm (9) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 55 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 10. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A0CA3E Service To be specified Material Carbon Steel (Coating Epoxy Resin) NDT Piping Class: Refer to Specification of Piping Inspection A0CA3E ASME B16.5 Pressure Class 150 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 50 Design Pressure (kPaG) 1900 1900 1760 Size 1/2"-3" ASME B31.3 2"-3" (Note4) 4"-10" 12"-24" 26”-48” SCH 80 SCH 40 STD (Note 8) Pipe THK Material Design code A106 Gr. B, SMLS, BE, Coating epoxy resin, ASME B36.10M, (Note 2) Fittings Butt Weld Fittings: (Note1, 2) Elbow , Tee, A234 Gr. WPB, BW, Coating epoxy resin, ASME B16.9 Reducer Sockolet - Weldolet A105, BW, Coating epoxy resin, MSS-SP-97 Threadolet - Coupling - Spectacle Blind, A105, CL 150, FF, Coating epoxy resin, ASME B16.48 See A2BA1Z. Spacer & Blanks A105, CL 150, WN-FF, Coating epoxy resin, ASME B16.5 Flange(Note9) (Note1,2,3) Blind Flange A105, CL 150, FF, Coating epoxy resin, ASME B16.5 (Note2,3) (Note9) Valves(Note9) ASME B16.34 CL 150 Ball Valve BA5NFRI / BA5NFFI Butterfly Valve FA5NFWE(<16” )/ FA5NFWUE(≥16” ) (Note7) Check Valve CA5NFW/CA5NFS Gate Valve GA5NF Globe Valve LA5NF Needle Valve 3mm thickness, Non-asbestos Fire Resisting Material With Shore A Durometer Hardness Of 55 To 60, CL 150, FF, ASME B16.21(Note5) Gasket 3mm thickness, NBR（Nitrile Butadiene Rubber）Rubber Sheet Gasket Combined Cloths, Shore A Durometer Hardness of 55 to 60, CL 150, FF, ASME B16.21 Bolt/Nuts (Note6) A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) Piping shall be coated epoxy resin inside after fabrication and inspection as per CB/T 3366 (3) All of sharp angles including flange inner rectangles shall be rounded before coating epoxy resin. (4) 2" & 3" are only used to connect branch. (5) Only used for FW, FF. (6) Only used for WS. (7) The butterfly valve shall endure 0.8Mpa back pressure minimum. Lug hole shall be through hole without threads. (8) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” STD STD 30” 32” 34” 36” 38” XS 40” 42” 44” 46” 48” 13m 14m (9) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 56 57 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 11. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A0CA3N Service To be specified Piping Class: A0CA3N(Note3) Material Carbon Steel(NACE MR0175 /ISO15156) ASME B16.5 Pressure Class 150 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -29 38 50 100 150 200 Design Pressure (kPaG) 1960 1960 1920 1770 1580 1380 ASME B31.3 Size 1/2”-1 1/2” 2”-3” 4"-10" 12"-24" 26”-36” Pipe THK SCH 80 SCH 80 SCH 40 STD (Note 7) Material A106 Gr. B SMLS, PE, ASME A106 Gr. B SMLS, BE, ASME B36.10M,NACE B36.10M,NACE MR0175/ISO15156 MR0175/ISO15156 Fittings Forged Fittings: Elbow, Tee, A105, CL 3000, SW, ASME B16.11,NACE Reducer MR0175/ISO15156 Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9,NACE MR0175/ISO15156 A105, CL 3000, SW, Sockolet - MSS-SP-97,NACE MR0175/ISO15156 Weldolet - A105, BW, MSS-SP-97,NACE MR0175/ISO15156 A105, CL 3000, SW, ASME B16.11,NACE Coupling - MR0175/ISO15156 A105, CL 3000, NPT, ASME B16.11,NACE Cap MR0175/ISO15156 A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156 A105, NPT,ASME B16.11,NACE Plug - MR0175/ISO15156 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange A105, CL 150, RF, ASME B16.48,NACE MR0175/ISO15156 A105, CL 150, SW-RF, ASME B16.5,NACE A105, CL 150, WN-RF, ASME B16.5, MR0175/ISO15156 NACE MR0175/ISO15156 (Note1) A105, CL 150, RF, ASME B16.5,NACE MR0175/ISO15156 (Note11) Valves(Note11) Ball Valve API 602 CL 800 ASME B16.34 CL 150 BS1CXIV/ BS1CMIV BA1CRRIV/ BA1CRFIV Butterfly Valve - - Check Valve CS1CXPV CA1CRWV/ CA1CRSV Gate Valve GS1CXV/ GS1CMV GA1CRV Globe Valve LS1CXV LA1CRV NS1CXV/ NS1CMV - Needle Valve 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156, CL 150, RF, Gasket ASME B16.20 Bolt/Nuts ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection shall only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” STD STD 58 30” 32” 34” XS 36” (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 12. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A0CA6N Service To be specified Piping Class: A0CA6N (Note3) Material Carbon Steel(NACE MR0175 /ISO15156) ASME B16.5 Pressure Class 150 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -29 38 50 100 150 200 Design Pressure (kPaG) 1960 1960 1920 1770 1580 1380 Size 1/2”-1 1/2” 2”-3” 4"-8" 10” 12"-24" 26”-36” XXS SCH 160 SCH 80 SCH60 XS (Note 7) Pipe THK Material A106 Gr. B SMLS, PE, ASME A106 Gr. B SMLS, BE, ASME B36.10M,NACE B36.10M,NACE MR0175/ISO15156 MR0175/ISO15156 Fittings Forged Fittings: Elbow, Tee, A105, CL 9000, SW, ASME B16.11,NACE Reducer MR0175/ISO15156 Sockolet Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9,NACE MR0175/ISO15156 A105, BW, MSS-SP-97,NACE Weldolet MR0175/ISO15156 A105, BW, MSS-SP-97,NACE MR0175/ISO15156 A105, CL 9000, SW, ASME B16.11,NACE Coupling - MR0175/ISO15156 A105, CL 6000, NPT, ASME B16.11,NACE Cap MR0175/ISO15156 A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156 A105, NPT,ASME B16.11,NACE Plug - MR0175/ISO15156 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange ASME B31.3 A105, CL 150, RF, ASME B16.48,NACE MR0175/ISO15156 A105, CL 150, SW-RF, ASME B16.5,NACE A105, CL 150, WN-RF, ASME B16.5, MR0175/ISO15156 NACE MR0175/ISO15156 (Note1) A105, CL 150, RF, ASME B16.5,NACE MR0175/ISO15156 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 150 BS1CXIQV/ BS1CMIQV BA1CRRIQV/ BA1CRFIQV - - Check Valve CS1CXPQV CA1CRWQV/ CA1CRSQV Gate Valve GS1CXQV/ GS1CMQV GA1CRQV Globe Valve LS1CXQV LA1CRQV NS1CXQV/ NS1CMQV - Ball Valve Butterfly Valve Needle Valve 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156, CL 150, RF, Gasket ASME B16.20 Bolt/Nuts ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection shall only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 59 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 XS XS SCH30 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 60 13. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A0CA3Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class 150 Corrosion Allowance: 3mm NDT Refer to Specification of Piping Inspection A0CA3Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -29 38 50 100 150 200 Design Pressure (kPaG) 1960 1960 1920 1770 1580 1380 ASME B31.3 Size 1/2"-1 1/2" 2" -3" 4"-10" 12"-24" 26”-36” Pipe THK SCH 80 SCH 80 SCH 40 STD (Note 7) Material A106 Gr. B SMLS, PE, ASME B36.10M Fittings A106 Gr. B SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, A105, CL 3000, SW, ASME B16.11 Reducer Sockolet Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 A105, CL 3000, SW, MSS-SP-97 Weldolet - Coupling A105, CL 3000, SW, ASME B16.11 Cap A105, CL 3000, NPT, ASME B16.11 Plug A105, NPT, ASME B16.11 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange A105, BW, MSS-SP-97 A234 Gr. WPB, BW, ASME B16.9 - A105, CL 150, RF, ASME B16.48 A105, CL 150, SW-RF,ASME B16.5 A105, CL 150, WN-RF, ASME B16.5 (Note1) A105, CL 150, RF, ASME B16.5 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 150 Ball Valve BS1CXI / BS1CMI BA1CRRI / BA1CRFI - - Check Valve CS1CXP CA1CRW / CA1CRS Gate Valve GS1CX / GS1CM GA1CR Globe Valve LS1CX LA1CR Needle Valve NS1CX / NS1CM - Butterfly Valve Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 150, RF, ASME B16.20 Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” STD STD 30” 32” 34” 36” XS (8) For DO system, branch pipe should be connected to the main pipe directly by using stub in method, and radiography test could be cancelled. (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 61 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 14. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A0CA6Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class 150 Corrosion Allowance: 6mm NDT Refer to Specification of Piping Inspection A0CA6Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -29 38 50 100 150 200 Design Pressure (kPaG) 1960 1960 1920 1770 1580 1380 Size Pipe THK Material 1/2”-1 1/2” 2”-3” 4"-8" 10” 12"-24" 26”-36” XXS SCH 160 SCH 80 SCH60 XS (Note 7) A106 Gr. B SMLS, PE, ASME B36.10M Fittings Forged Fittings: Elbow, Tee, A105, CL 9000, SW, ASME B16.11 Reducer Sockolet A106 Gr. B SMLS, BE, ASME B36.10M Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 - Weldolet A105, BW, MSS-SP-97 Coupling A105, CL 9000, SW, ASME B16.11 Cap A105, CL 6000, NPT, ASME B16.11 Plug A105, NPT, ASME B16.11 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange ASME B31.3 A105, BW, MSS-SP-97 A234 Gr. WPB, BW, ASME B16.9 - A105, CL 150, RF, ASME B16.48 A105, CL 150, SW-RF,ASME B16.5 A105, CL 150, WN-RF, ASME B16.5 (Note1) A105, CL 150, RF, ASME B16.5 (Note11) Valves(Note11) Ball Valve API 602 CL 800 ASME B16.34 CL 150 BS1CXIQ / BS1CMIQ BA1CRRIQ / BA1CRFIQ Butterfly Valve - - Check Valve CS1CXPQ CA1CRWQ / CA1CRSQ Gate Valve GS1CXQ / GS1CMQ GA1CRQ Globe Valve LS1CXQ LA1CRQ Needle Valve NS1CXQ / NS1CMQ - Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 150, RF, ASME B16.20 Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” XS XS 30” 32” 34” 36” SCH30 (8) For DO system, branch pipe should be connected to the main pipe directly by using stub in method, and radiography test could be cancelled. 62 15. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A0AA3L Service To be specified Material Low Temperature Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection A0AA3L ASME B16.5 Pressure Class 150 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 1960 1960 1920 1770 1580 Design code ASME B31.3 Size 1/2”-1 1/2” 2” -3” 4”-10” 12”-24” 26”-36” Pipe THK SCH 80 SCH 80 SCH 40 STD (Note 7) Material A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings A333 Gr. 3 SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 3000, SW, ASME B16.11 Reducer Sockolet Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, CL 3000, SW, MSS-SP-97 Weldolet - A350 LF3 CL2, BW, MSS-SP-97 Coupling A350 LF3 CL2, CL 3000, SW, ASME B16.11 - Cap A350 LF3 CL2, CL 3000, NPT, ASME B16.11 A420 WPL3, BW, ASME B16.9 Plug A350 LF3 CL2, NPT, ASME B16.11 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange - A350 LF3 CL2, CL 150, RF, ASME B16.48 A350 LF3 CL2, CL 150, SW-RF, ASME B16.5 A350 LF3 CL2, CL 150, WN-RF, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 150, RF, ASME B16.5 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 150 Ball Valve BS9CXI / BS9CMI BA9CRRI / BA9CRFI Butterfly Valve - - Check Valve CS9CXP CA9CRW / CA9CRS Gate Valve GS9CX / GS9CM GA9CR Globe Valve LS9CX LA9CR Needle Valve NS9CX / NS9CM - Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 150, RF, ASME B16.20 ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating Plated Bolt/Nuts with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” STD STD 30” 32” 34” 36” XS (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 63 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 16. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A0AA6L Service BD, FL, FG Material Low Temperature Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection A0AA6L ASME B16.5 Pressure Class 150 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 1960 1960 1920 1770 1580 Size 1/2”-1 1/2” Pipe THK XXS Material A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings 2” A350 LF3 CL2, CL 3000, SW, ASME B16.11 Reducer Sockolet ASME B31.3 8“ 10”-14“ 16”-24” 26”-36” SCH60 STD XS (Note 7) A333 Gr. 3 SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, 3“-6” SCH 160 SCH80 Design code Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9 - Weldolet A350 LF3 CL2, BW, MSS-SP-97 Coupling A350 LF3 CL2, CL 3000, SW, ASME B16.11 Cap A350 LF3 CL2, CL 3000, NPT, ASME B16.11 Plug A350 LF3 CL2, NPT, ASME B16.11 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange A350 LF3 CL2, BW, MSS-SP-97 - A420 WPL3, BW, ASME B16.9 - A350 LF3 CL2, CL 150, RF, ASME B16.48 A350 LF3 CL2, CL 150, SW-RF, ASME B16.5 A350 LF3 CL2, CL 150, WN-RF, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 150, RF, ASME B16.5 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 150 BS9CXIQ / BS9CMIQ BA9CRRIQ / BA9CRFIQ Butterfly Valve - - Check Valve CS9CXPQ CA9CRWQ / CA9CRSQ Gate Valve GS9CXQ / GS9CMQ GA9CRQ Globe Valve LS9CXQ LA9CRQ Needle Valve NS9CXQ / NS9CMQ - Ball Valve Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 150, RF, ASME B16.20 ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating Plated Bolt/Nuts with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” XS 30” 32” 34” 36” SCH30 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 64 17. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A0AA3O Service To be specified Material Low Temperature Carbon Steel(NACE MR0175/ISO15156) NDT Piping Class: Refer to Specification of Piping Inspection A0AA3O(Note3) ASME B16.5 Pressure Class 150 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 1960 1960 1920 1770 1580 Design code ASME B31.3 Size 1/2”-1 1/2” 2” -3” 4”-10” 12”-24” 26”-36” Pipe THK SCH 80 SCH 80 SCH 40 STD (Note 7) A333 Gr. 3 SMLS, PE, ASME B36.10M, Material NACE MR0175/ISO15156 Fittings A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 3000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, CL 3000, SW, MSS-SP-97, Sockolet - NACE MR0175/ISO15156 Weldolet - A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, CL 3000, SW, ASME Coupling - B16.11, NACE MR0175/ISO15156 A350 LF3 CL2, CL 3000, NPT, ASME Cap B16.11, NACE MR0175/ISO15156 A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, NPT, ASME B16.11, NACE Plug - MR0175/ISO15156 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange A350 LF3 CL2, CL 150, RF, ASME B16.48, NACE MR0175/ISO15156 A350 LF3 CL2, CL 150, SW-RF, ASME A350 LF3 CL2, CL 150, WN-RF, ASME B16.5 , NACE B16.5, NACE MR0175/ISO15156 MR0175/ISO15156 (Note1) ASTM A350 LF3 CL2, CL 150, RF, ASME B16.5, NACE MR0175/ISO15156 (Note11) Valves(Note11) Ball Valve API 602 CL 800 ASME B16.34 CL 150 BS9CXIV / BS9CMIV BA9CRRIV / BA9CRFIV Butterfly Valve - - Check Valve CS9CXPV CA9CRWV / CA9CRSV Gate Valve GS9CXV / GS9CMV GA9CRV Globe Valve LS9CXV LA9CRV NS9CXV / NS9CMV - Needle Valve 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156, CL 150, RF, Gasket ASME B16.20 ASTM A320 Gr.L7M Stud Bolt / A194 Gr.7ML HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts white color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” STD STD 30” 32” 34” 36” XS (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 65 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 18. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS A0AA6O Piping Class: BD, FL, FG Low Temperature Carbon Steel(NACE Material MR0175/ISO15156) NDT Refer to Specification of Piping Inspection A0AA6O ASME B16.5 Pressure Class 150 Corrosion Allowance: 6mm Design Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) Design Pressure (kPaG) -101 38 50 100 150 1960 1960 1920 1770 1580 Size B31.3 2” 3“-6” 8“ 10”-14“ 16”-24” 26”-36” XXS SCH 160 SCH80 SCH60 STD XS (Note 7) A333 Gr. 3 SMLS, PE, ASME B36.10M, NACE MR0175/ISO15156 Fittings ASME 1/2”-1 1/2” Pipe THK Material A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 3000, SW, ASME B16.11, Reducer NACE MR0175/ISO15156 Sockolet Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97,NACE Weldolet MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, CL 3000, SW, ASME B16.11, Coupling - NACE MR0175/ISO15156 A350 LF3 CL2, CL 3000, NPT, ASME Cap B16.11, NACE MR0175/ISO15156 A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, NPT, ASME B16.11, NACE Plug - MR0175/ISO15156 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange code A350 LF3 CL2, CL 150, RF, ASME B16.48, NACE MR0175/ISO15156 A350 LF3 CL2, CL 150, SW-RF, ASME A350 LF3 CL2, CL 150, WN-RF, ASME B16.5 (Note1), NACE B16.5, NACE MR0175/ISO15156 MR0175/ISO15156 ASTM A350 LF3 CL2, CL 150, RF, ASME B16.5, NACE MR0175/ISO15156 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 150 BS9CXIQV / BS9CMIQV BA9CRRIQV / BA9CRFIQV Check Valve CS9CXPQV CA9CRWQV / CA9CRSQV Gate Valve GS9CXQV / GS9CMQV GA9CRQV Globe Valve LS9CXQV LA9CRQV Needle Valve NS9CXQV / NS9CMQV - Ball Valve 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156,CL 150, RF, Gasket ASME B16.20 ASTM A320 Gr.L7M Stud Bolt / A194 Gr.7ML HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts white color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (6) All materials shall comply with NACE MR0175/ISO15156. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” XS 66 30” 32” 34” SCH30 36” (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 19. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A0SA0L Service To be specified Piping Class: Material Stainless Steel ASME B16.5 Pressure Class 150 Corrosion Allowance: 0mm NDT Refer to Specification of Piping Inspection A0SA0L Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 1590 1590 1530 1330 1200 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-4” 6"-24" 26”-36” Pipe THK SCH 80S SCH 40S SCH 10S (Note 7) Material A312 TP316L SMLS, PE, ASME B36.19M Fittings A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) Forged Fittings: Elbow, Tee, A182 F316L, CL 3000, SW, ASME B16.11 Reducer Sockolet Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL 3000, SW, MSS-SP-97 Weldolet - Coupling A182 F316L, CL 3000, SW, ASME B16.11 Cap A182 F316L, CL 3000, NPT, ASME B16.11 Plug A182 F316L,NPT, ASME B16.11 Spectacle Blind, A182 F316L, BW, MSS-SP-97 A403 Gr. WP 316L, BW, ASME B16.9 - A182 F316L, CL 150, RF, ASME B16.48 Spacer & Blanks Flange(Note11) A182 F316L, CL 150,SW-RF, ASME B16.5 Blind Flange A182 F316L, CL 150, WN-RF, ASME B16.5 (Note1) A182 F316L, CL 150, RF, ASME B16.5 (Note11) Valves(Note11) Ball Valve API 602 CL 800 ASME B16.34 CL 150 BS2CXZI / BS2CMZI BA2CRRZI / BA2CRFZI Butterfly Valve - - Check Valve CS2CXPZ CA2CRWZ / CA2CRSZ Gate Valve GS2CXZ / GS2CMZ GA2CRZ Globe Valve LS2CXZ LA2CRZ Needle Valve NS2CXZ / NS2CMZ - Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 150, RF, ASME B16.20 ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” XS (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 67 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 20. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A0SA0N Service To be specified Piping Class: A0SA0N (Note3) Material Stainless Steel (NACE MR0175 /ISO15156) ASME B16.5 Pressure Class 150 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 50 100 150 Design Pressure (kPaG) 1590 1590 1530 1330 1200 Size 1/2"-1 1/2" Pipe THK SCH 80S A312 TP316L SMLS, PE, ASME Material B36.19M,NACE MR0175/ISO15156 Fittings Forged Fittings: Design code ASME B31.3 2"-4" 6"-24" 26”-36” SCH 40S SCH 10S (Note 7) A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6), NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) Elbow, Tee, A182 F316L, CL 3000, SW, ASME A403 Gr. WP 316L, BW, ASME B16.9,NACE Reducer B16.11,NACE MR0175/ISO15156 MR0175/ISO15156 A182 F316L, CL 3000, SW, MSS-SP-97,NACE Sockolet - MR0175/ISO15156 Weldolet - A182 F316L, BW, MSS-SP-97,NACE MR0175/ISO15156 A182 F316L, CL 3000, SW, ASME Coupling - B16.11,NACE MR0175/ISO15156 Cap A182 F316L, CL 3000, NPT, ASME A403 Gr. WP 316L, BW, ASME B16.9,NACE B16.11,NACE MR0175/ISO15156 MR0175/ISO15156 A182 F316L,NPT, ASME B16.11,NACE Plug - MR0175/ISO15156 Spectacle Blind, A182 F316L, CL 150, RF, ASME B16.48,NACE MR0175/ISO15156 Spacer & Blanks Flange(Note11) Blind Flange A182 F316L, CL 150, SW-RF, ASME A182 F316L, CL 150, WN-RF, ASME B16.5,NACE B16.5,NACE MR0175/ISO15156 MR0175/ISO15156 (Note1) A182 F316L, CL 150, RF, ASME B16.5,NACE MR0175/ISO15156 (Note11) Valves(Note11) Ball Valve API 602 CL 800 ASME B16.34 CL 150 BS2CXIV / BS2CMIV BA2CRRIV / BA2CRFIV Butterfly Valve - - Check Valve CS2CXPV CA2CRWV / CA2CRSV Gate Valve GS2CXV / GS2CMV GA2CRV Globe Valve LS2CXV LA2CRV NS2CXV / NS2CMV - Needle Valve 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156, CL 150, RF, Gasket ASME B16.20. ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” XS 68 34” 36” (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 21. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A0SA0O Service To be specified Piping Class: A0SA0O(Note3) Material Stainless Steel(NACE MR0175 /ISO15156) ASME B16.5 Pressure Class 150 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 1590 1590 1530 1330 1200 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-4” 6"-24" 26”-36” Pipe THK SCH 80S SCH 40S SCH 10S (Note 7) A312 TP316L SMLS, PE, ASME B36.19M, Material NACE MR0175/ISO15156 Fittings A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6), NACE MR0175/ISO15156 Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A182 F316L, CL 3000, SW, ASME B16.11, A403 Gr. WP 316L, BW, ASME B16.9, NACE Reducer NACE MR0175/ISO15156 MR0175/ISO15156 A182 F316L, CL 3000, SW, MSS-SP-97, Sockolet NACE MR0175/ISO15156 Weldolet A182 F316L, CL 3000, SW, ASME B16.11, Coupling NACE MR0175/ISO15156 Cap - A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156 A403 Gr. WP 316L, BW, ASME B16.9, NACE MR0175/ISO15156 A182 F316L,NPT, ASME B16.11, NACE Plug - MR0175/ISO15156 Spectacle Blind, A182 F316L, CL 150, RF, ASME B16.48, NACE MR0175/ISO15156 Spacer & Blanks Flange(Note11) Blind Flange A182 F316L, CL 150,SW-RF, ASME B16.5, A182 F316L, CL 150, WN-RF, ASME B16.5 (Note1), NACE NACE MR0175/ISO15156 MR0175/ISO15156 A182 F316L, CL 150, RF, ASME B16.5, NACE MR0175/ISO15156 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 150 BS2CXZIV / BS2CMZIV BA2CRRZIV / BA2CRFZIV - - Check Valve CS2CXPZV CA2CRWZV / CA2CRSZV Gate Valve GS2CXZV / GS2CMZV GA2CRZV Globe Valve LS2CXZV LA2CRZV Needle Valve NS2CXZV / NS2CMZV - Ball Valve Butterfly Valve Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 150, RF, ASME B16.20 ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” XS (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 69 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 22. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A0SA0Z Service To be specified Piping Class: Material Stainless Steel ASME B16.5 Pressure Class 150 Corrosion Allowance: 0mm NDT Refer to Specification of Piping Inspection A0SA0Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 50 100 150 Design Pressure (kPaG) 1590 1590 1530 1330 1200 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-4” 6"-24" 26”-36” Pipe THK SCH 80S SCH 40S SCH 10S (Note 7) A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr Material A312 TP316L SMLS, PE, ASME B36.19M Fittings 316L Class1, WELDED(≥16”), B36.19M.(Note 6). Forged Fittings: Elbow, Tee, A182 F316L, CL 3000, SW, ASME B16.11 Reducer Sockolet - Coupling A182 F316L, CL 3000, SW, ASME B16.11 Cap A182 F316L, CL 3000, NPT, ASME B16.11 Plug A182 F316L, NPT, ASME B16.11 Spectacle Blind, A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, BW, MSS-SP-97 A403 Gr. WP 316L, BW, ASME B16.9 - A182 F316L, CL 150, RF, ASME B16.48 Spacer & Blanks Flange(Note11) A182 F316L, CL 150, SW-RF, ASME B16.5 Blind Flange A182 F316L, CL 150, WN-RF, ASME B16.5 (Note1) A182 F316L, CL 150, RF, ASME B16.5 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 150 Ball Valve BS2CXI / BS2CMI BA2CRRI / BA2CRFI - - Check Valve CS2CXP CA2CRW / CA2CRS Gate Valve GS2CX / GS2CM GA2CR Globe Valve LS2CX LA2CR Needle Valve NS2CX / NS2CM - Butterfly Valve Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 150, RF, ASME B16.20. ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” XS (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 70 ASME Butt Weld Fittings: (Note1) A182 F316L, CL 3000, SW, MSS-SP-97 Weldolet BE, 71 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 23. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS A0SI0N Piping Class: To be specified Material A0SI0N (Note3) Duplex Stainless Steel(NACE MR0175 /ISO15156) ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -50 38 50 100 150 200 Design Pressure (kPaG) 2000 2000 1950 1770 1580 1380 Size 1/2"-1 1/2" Pipe THK SCH 80S Material 150 Corrosion Allowance: ASME B31.3 2" 3"-8" 10"-24" 26”-36” SCH 40S SCH 10S SCH 10S (Note 7) A790 UNS S31803 SMLS, A790 UNS S31803 SMLS, A928 UNS S31803 WELDED, BE, PE,ASME B36.19M, BE, ASME B36.19M, ASME B36.19M, MR0175/ISO15156 MR0175/ISO15156 MR0175/ISO15156 (Note6) Fittings Forged Fittings: Elbow, Tee, A182 F51, CL 3000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9,NACE MR0175/ISO15156 A182 F51, CL 3000, Sockolet SW,MSS-SP-97, - NACE MR0175/ISO15156 Weldolet - A182 F51, BW, MSS-SP-97,NACE MR0175/ISO15156 A182 F51, CL 3000, SW,ASME Coupling - B16.11,NACE MR0175/ISO15156 A182 F51, CL 3000, NPT,ASME Cap B16.11,NACE MR0175/ISO15156 A815 UNS S31803, BW, ASME B16.9,NACE MR0175/ISO15156 A182 F51, NPT,ASME Plug - B16.11,NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange A182 F51, CL 150, RF, ASME B16.48,NACE MR0175/ISO15156 A182 A182 (Note11) F51, CL 150, SW-RF, ASME A182 B16.5,NACE MR0175/ISO15156 F51, CL 150, WN-RF, ASME B16.5,NACE MR0175/ISO15156 (Note1) F51, CL 150, RF, ASME B16.5,NACE MR0175/ISO15156 Valves(Note11) API 602 CL 800 ASME B16.34 CL 150 BS8EXIV/ BS8EMIV BA8ERRIV / BA8ERFIV - - Check Valve CS8EXPV CA8ERWV / CA8ERSV Gate Valve GS8EMV / GS8EXV GA8ERV Globe Valve LS8EXV LA8ERV NS8EXV / NS8EMV - Ball Valve Butterfly Valve Needle Valve 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring ,NACE MR0175/ISO15156, CL 150, Gasket RF, ASME B16.20 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Bolt/Nuts Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” SCH10 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 72 24. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS A0SI0Z Piping Class: To be specified Material Duplex Stainless Steel NDT Refer to Specification of Piping Inspection A0SI0Z ASME B16.5 Pressure Class 150 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -50 38 50 100 150 200 Design Pressure (kPaG) 2000 2000 1950 1770 1580 1380 Size 1/2"-1 1/2" Pipe THK SCH 80S Material 2" 3"-8" 10"-24" 26”-36” SCH 40S SCH 10S SCH 10S (Note 7) A790 UNS S31803 SMLS, A790 UNS S31803 SMLS, BE, A928 UNS S31803 WELDED, BE, ASME PE,ASME B36.19M ASME B36.19M Fittings Forged Fittings: Elbow, Tee, A182 F51, CL 3000, SW, Reducer ASME B16.11 B36.19M (Note6) Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9 A182 F51, CL 3000, SW, Sockolet - MSS-SP-97 Weldolet - A182 F51, BW, MSS-SP-97 A182 F51, CL 3000, SW,ASME Coupling - B16.11 A182 F51, CL 3000, NPT, Cap ASME B16.11 Plug A815 UNS S31803, BW, ASME B16.9 A182 F51, NPT,ASME B16.11 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange - A182 F51, CL 150, RF, ASME B16.48 A182 F51, CL 150, SW-RF, ASME B16.5 A182 (Note11) A182 F51, CL 150, WN-RF, ASME B16.5 (Note1) F51, CL 150, RF, ASME B16.5 Valves(Note11) API 602 CL 800 ASME B16.34 CL 150 Ball Valve BS8EXI / BS8EMI BA8ERRI / BA8ERFI - - Check Valve CS8EXP CA8ERW / CA8ERS Gate Valve GS8EM / GS8EX GA8ER Globe Valve LS8EX LA8ER Needle Valve NS8EX / NS8EM - Butterfly Valve Gasket ASME B31.3 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 150, RF, ASME B16.20 ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” SCH10 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 73 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 25. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A0SK0N Service To be specified Material Duplex Stainless Steel(NACE MR0175 /ISO15156) NDT Piping Class: Refer to Specification of Piping Inspection A0SK0N (Note3) ASME B16.5 Pressure Class 150 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -50 38 50 100 150 200 Design Pressure (kPaG) 2000 2000 1950 1770 1580 1380 Size 1/2"-1 1/2" Pipe THK SCH 80S A790 UNS S32750 SMLS, PE,ASME Material B36.19M, MR0175/ISO15156 Fittings 2" 3"-8" 10"-24" 26”-36” SCH 40S SCH 10S SCH 10S (Note 7) A790 UNS S32750 SMLS, BE,ASME B36.19M, A182 F53, CL 3000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9,NACE MR0175/ISO15156 A182 F53, CL 3000, SW,MSS-SP-97, Sockolet - NACE MR0175/ISO15156 Weldolet - A182 F53, BW, MSS-SP-97,NACE MR0175/ISO15156 A182 F53, CL 3000, SW,ASME Coupling - B16.11,NACE MR0175/ISO15156 A182 F53, CL 3000, NPT,ASME Cap B16.11,NACE MR0175/ISO15156 A815 UNS S32750, BW, ASME B16.9,NACE MR0175/ISO15156 A182 F53, NPT,ASME B16.11,NACE Plug - MR0175/ISO15156 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange A182 F53, CL 150, RF, ASME B16.48,NACE MR0175/ISO15156 A182 F53, CL 150, SW-RF, ASME A182 F53, CL 150, WN-RF, ASME B16.5,NACE MR0175/ISO15156 B16.5,NACE MR0175/ISO15156 (Note1) A182 (Note11) A928 UNS S32750 WELDED, BE, ASME B36.19M, MR0175/ISO15156 (Note 6) MR0175/ISO15156 Forged Fittings: Elbow, Tee, ASME B31.3 F53, CL 150, RF, ASME B16.5,NACE MR0175/ISO15156 Valves(Note11) Ball Valve API 602 CL 800 ASME B16.34 CL 150 BS10PXIV/ BS10PMIV BA10PRRIV / BA10PRFIV Butterfly Valve - - Check Valve CS10PXPV CA10PRWV / CA10PRSV Gate Valve GS10PMV / GS10PXV GA10PRV Globe Valve LS10PXV LA10PRV NS10PXV / NS10PMV - Needle Valve 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring ,NACE MR0175/ISO15156, CL 150, RF, Gasket ASME B16.20 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating Bolt/Nuts with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” SCH10 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 74 26. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS A0SK0Z Piping Class: To be specified Material Duplex Stainless Steel NDT Refer to Specification of Piping Inspection A0SK0Z ASME B16.5 Pressure Class 150 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -50 38 50 100 150 200 Design Pressure (kPaG) 2000 2000 1950 1770 1580 1380 Size 1/2"-1 1/2" 2" 3"-8" 10"-24" Pipe THK SCH 80S SCH 40S SCH 10S SCH 10S Material A790 UNS S32750 SMLS, A790 UNS S32750 SMLS, PE,ASME B36.19M BE,ASME B36.19M Fittings Forged Fittings: Elbow, Tee, A182 F53, CL 3000, SW, Reducer ASME B16.11 - A182 F53, CL 3000, NPT, ASME B16.11 Plug Spacer & Blanks Flange(Note11) Blind Flange A182 F53, CL 150, SW-RF, ASME B16.5 A815 UNS S32750, BW, ASME B16.9 - A182 F53, CL 150, WN-RF, ASME B16.5 (Note1) F53, CL 150, RF, ASME B16.5 Valves(Note11) API 602 CL 800 ASME B16.34 CL 150 BS10PXI / BS10PMI BA10PRRI / BA10PRFI - - Check Valve CS10PXP CA10PRW / CA10PRS Gate Valve GS10PM / GS10PX GA10PR Globe Valve LS10PX LA10PR Needle Valve NS10PX / NS10PM - Ball Valve Butterfly Valve Gasket (Note6) A182 F53, CL 150, RF, ASME B16.48 A182 (Note11) ASME B36.10M A182 F53, BW, MSS-SP-97 A182 F53, NPT,ASME B16.11 Spectacle Blind, WELDED, BE, - B16.11 Cap (Note 7) A928 UNS S32750 A815 UNS S32750, BW, ASME B16.9 A182 F53, CL 3000, SW,ASME Coupling 26”-36” Butt Weld Fittings: (Note1) MSS-SP-97 Weldolet WELDED, BE, ASME B36.19M (Note6) A182 F53, CL 3000, SW, Sockolet A928 UNS S32750 ASME B31.3 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 150, RF, ASME B16.20 ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” SCH10 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 75 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 27. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS A1BA1Z Piping Class: To be specified Material 90Cu/10Ni NDT Refer to Specification of Piping Inspection A1BA1Z ASME B16.5 Pressure Class 150 Corrosion Allowance: 0.5mm Design Pressure / Temperature Design Temperature (℃) 50 Design Pressure (kPaG) 1500 Size PipeTHK(mm) Material Elbow, Tee, Reducer Sockolet 1"-11/2" 2.0 2.5 Pipe Nipple Coupling Cap, Plug Connectors 2”-3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28” 32” 36” 2.5 4.5 5.5 6.5 7 8 8.5 10.5 12 13.5 15.5 3 3 4 B466 UNS C70600 B466 UNS C70600 SMLS, SMLS, 16bar, BE, 16bar, PE, EEMUA 234 EEMUA 234 B467 UNS C70600 Welded, 16bar, BE, EEMUA 234 Forged Fittings: B151 UNS C70600, 16bar,SW(or NPT), EEMUA 234 B151 UNS C70600, 16bar,SW, EEMUA 234 Weldolet Threadolet ASME B31.3 1/2"-3/4" Fittings - Butt Weld Fittings: (Note1) B466 UNS C70600 BW, B467 UNS C70600 BW, 16bar, EEMUA 234 16bar, EEMUA 234 B151 UNS C70600, 16bar, BW, EEMUA 234 B151 UNS C70600, 16bar, NPT, EEMUA 234 B151 UNS C70600, PE(or NPT),L=100mm (Note7) B151 UNS C70600, 16bar, SW(or NPT), EEMUA 234 B151 UNS C70600, 16bar, NPT, EEMUA234 B151 UNS C70600, 16 bar, NPT X SW - - Flange B151 C70600, 16bar, WN-FF, EEMUA 234 (Note1) Blind Flange (Note11) B151 C70600, CL 150, FF, ASME B16.5 Valves(Note11) Design Code ASME B16.34 CL 150 Ball Valve ASME B16.34 CL 150 BA5NSI BA5NFRI / BA5NFFI Butterfly Valve - FA5NFWE(<16” ) / FA5NFWUE(≥16” ) (Note8) Check Valve CA5NSP CA5NFS/CA5NFW Gate Valve GA5NS GA5NF Globe Valve LA5NS LA5NF NA5NS - Needle Valve Gasket 3mm thickness, NBR(Nitrile Butadiene Rubber) Rubber Sheet Gasket Combined Cloths With Shore A Durometer Hardness Of 55 To 60, CL 150, FF, ASME B16.21(Note5) 3mm thickness, Non-asbestos Fire Resisting Material With Shore A Durometer Hardness Of 55 To 60, CL 150, FF, ASME B16.21 (Note6) Bolt/Nuts ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red color. (Note4) Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT can be used only for fire water spray nozzles, valves and pressure instrument connection. (3) Graphite containing gaskets shall not be used in sea water service. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Only used for WS, WB, WG, WW. (6) Only used for FW. (7) The wall thickness shall be SCH160. (8) The butterfly valve shall endure 0.8Mpa back pressure minimum. Lug hole shall be through hole without threads. (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 76 28. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS A2BA1Z Service To be specified Material 90Cu/10Ni NDT Piping Class: Refer to Specification of Piping Inspection A2BA1Z ASME B16.5 Pressure Class 150 Corrosion Allowance: 0.5mm Design Pressure / Temperature Design Temperature (℃) 50 Design Pressure (kPaG) 1760 Size PipeTHK(mm) Material Fittings Elbow, Tee, Reducer Sockolet Pipe Nipple Coupling Cap, Plug Connectors ASME B31.3 1/2"-3/4" 1"-11/2" 2”-3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24” 28” 32” 36” 2.0 2.5 2.5 3.0 3.5 4.5 5.5 7 8 9 9.5 11 13 15 17 19 B466 UNS C70600 SMLS, 20bar, PE, EEMUA 234 B466 UNS C70600 SMLS, 20bar, BE, EEMUA 234 Forged Fittings: B467 UNS C70600 Welded, 20bar, BE, EEMUA 234 Butt Weld Fittings: (Note1) B151 UNS C70600, B466 UNS C70600 BW, 20bar, B467 UNS C70600 BW, 20bar, EEMUA 234 20bar,SW(or NPT), EEMUA 234 EEMUA 234 B151 UNS C70600, 20bar,SW, EEMUA 234 Weldolet Threadolet Design Code - B151 UNS C70600, 20bar, BW, EEMUA 234 B151 UNS C70600, 20bar, NPT, EEMUA 234 B151 UNS C70600, PE(or NPT),L=100mm (Note7) B151 UNS C70600, 20bar, SW(or NPT), EEMUA 234 B151 UNS C70600, 20bar, NPT, EEMUA234 B151 UNS C70600, 20 bar, NPT X SW - - Flange B151 C70600, 20bar, WN-FF, EEMUA 234 (Note1) Blind Flange (Note11) B151 C70600, CL 150, FF, ASME B16.5 Valves(Note11) ASME B16.34 CL 150 Ball Valve ASME B16.34 CL 150 BA5NSI BA5NFRI / BA5NFFI Butterfly Valve - FA5NFWE(<16” ) / FA5NFWUE(≥16” ) (Note8) Check Valve CA5NSP CA5NFS/CA5NFW Gate Valve GA5NS GA5NF Globe Valve LA5NS LA5NF NA5NS - Needle Valve Gasket 3mm thickness, NBR(Nitrile Butadiene Rubber) Rubber Sheet Gasket Combined Cloths With Shore A Durometer Hardness Of 55 To 60, CL 150, FF, ASME B16.21(Note5) 3mm thickness, Non-asbestos Fire Resisting Material With Shore A Durometer Hardness Of 55 To 60, CL 150, FF, ASME B16.21 (Note6) Bolt/Nuts ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red color. (Note4) Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT can be used only for fire water spray nozzles, valves and pressure instrument connection. (3) Graphite containing gaskets shall not be used in sea water service. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Only used for WS, WB, WG, WW. (6) Only used for FW. (7) The wall thickness shall be SCH160. (8) The butterfly valve shall endure 0.8Mpa back pressure minimum. Lug hole shall be through hole without threads. (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 77 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 29. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0CA2G Service To be specified Material Carbon Steel (GALV.) NDT Piping Class: Refer to Specification of Piping Inspection B0CA2G ASME B16.5 Pressure Class 300 Corrosion Allowance: 1.5mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -29 38 100 150 200 OTHER ASME B31.3 Design Pressure (kPaG) 5110 5110 4660 4510 4380 CO2 NFPA 2001/ ASME B31.3 1/2”-1 1/2” 2″-3″ 4″-10″ 12″-24″ SCH 80 SCH 80 SCH 40 SCH 40 Size Pipe THK A106 Gr. B SMLS, PE, GALV., Material ASME B36.10M Fittings Forged Fittings: Elbow, Tee, A105, CL 3000, SW, GALV., ASME B16.11 Reducer Sockolet A106 Gr. B SMLS, BE, GALV.,ASME B36.10M (Note2) Butt Weld Fittings: (Note1, 2) A234, Gr. WPB, BW, GALV., ASME B16.9 A105, CL 3000, SW, GALV., MSS-SP-97 Weldolet - A105, BW, GALV., MSS-SP-97 A105, CL 3000, NPT, GALV., Threadolet - ASME B16.11 Union A105, CL 3000, ST-ST, NPT, GALV., MSS-SP-83 - A105, CL 3000,SW, GALV., Coupling - ASME B16.11 A105, CL 3000, NPT, GALV., Cap ASME B16.11 Plug A105, NPT, GALV.,ASME B16.11 - Spectacle Blind, Spacer & A105, CL 300, RF, GALV., ASME B16.48 Blanks Flange A105, CL 300,SW-RF, GALV., ASME B16.5 Blind Flange A105, CL 300, RF, GALV., ASME B16.5 A105, CL300, WN-RF, GALV., ASME B16.5 (Note1, 2) Valves API 602 CL 800 ASME B16.34 CL 300 Ball Valve BS2CSI BB1CRRGI / BB1CRFGI Butterfly Valve - - Check Valve CS2CSP CB1CRWG / CB1CRSG Gate Valve GS2CS GB1CRG Globe Valve LS2CS LB1CRG Needle Valve NS2CS - Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 300, RF, ASME B16.20 Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating. Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) Hot dip galvanization after fabrication for welding pipes. (3) NPT connection could only be used for spray nozzles, valve and instrument connection. 78 30. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0CA3H Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class 300 Corrosion Allowance: 3mm NDT Refer to Specification of Piping Inspection B0CA3H Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 100 150 200 250 300 Design Pressure (kPaG) 5110 5110 4660 4510 4380 4190 3980 Size 1/2”-1 1/2” Pipe THK SCH 160 Material A106 Gr. B SMLS, PE,ASME B36.10M Fittings A105, CL 6000, SW, ASME B16.11 Reducer Sockolet ASME B31.3 2”-8” 10” 12”-16” 18”-24” 26“-36” SCH 80 SCH 60 XS SCH 40 (Note 7) A106 Gr. B SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 A105, CL 6000, SW, MSS-SP-97 Weldolet - Design code A105, BW, MSS-SP-97 Pipe Nipple A105, PE, L=100mm, (Note1) - Coupling A105, CL 6000, SW, ASME B16.11 - Cap A105, CL 6000, NPT, ASME B16.11 A234 Gr. WPB, BW, ASME B16.9 Plug A105, NPT,ASME B16.11 Spectacle Blind, Spacer & Blanks Flange(Note 11) Blind Flange (Note 11) - A105, CL 300, RF, ASME B16.48 A105, CL 300, SW-RF, ASME B16.5 A105, CL 300, WN-RF, ASME B16.5 (Note1) A105, CL 300, RF, ASME B16.5 Valves(Note 11) API 602 CL 800 ASME B16.34 CL 300 BS1CXHI / BS1CMHI BB1CRRHI/ BB1CRFHI Butterfly Valve - - Check Valve CS1CXPH CB1CRWH / CB1CRSH Gate Valve GS1CXH / GS1CMH GB1CRH Globe Valve LS1CXH LB1CRH Needle Valve NS1CXH / NS1CMH - Ball Valve Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 300, RF, ASME B16.20 Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating. Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 18mm 19mm 20mm 21mm 22mm 23mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 79 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 31. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0CA3N Service To be specified Piping Class: B0CA3N(Note3) Material Carbon Steel(NACEMR0175 /ISO15156) ASME B16.5 Pressure Class 300 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 100 150 200 Design Pressure (kPaG) 5110 5110 4660 4510 4380 Size 1/2”-1 1/2” Pipe THK SCH 160 Material 2”-8” ASME B31.3 10”-16” 18”-24” A106 Gr. B SMLS, PE, ASME SCH 80 XS SCH 40 A106 Gr. B SMLS, BE, ASME B36.10M,NACE B36.10M,NACE MR0175/ISO15156 MR0175/ISO15156 Fittings Forged Fittings: Elbow, Tee, A105, CL 6000, SW, ASME B16.11,NACE Reducer MR0175/ISO15156 - A105, BW, MSS-SP-97,NACE MR0175/ISO15156 A105, PE, L=100mm, NACE Pipe Nipple - MR0175/ISO15156 (Note1) A105, CL 6000, SW, ASME B16.11,NACE Coupling - MR0175/ISO15156 A105, CL 6000, NPT, ASME B16.11,NACE Cap MR0175/ISO15156 A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156 A105,NPT,ASME B16.11,NACE Plug - MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A105, CL 300, RF, ASME B16.48,NACE MR0175/ISO15156 A105, CL 300, SW-RF, ASME B16.5,NACE A105, CL 300, WN-RF, ASME B16.5, Flange(Note11) MR0175/ISO15156 Blind Flange NACE MR0175/ISO15156 (Note1) A105, CL 300, RF, ASME B16.5,NACE MR0175/ISO15156 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 300 BS1CXIV/ BS1CMIV BB1CRRIV/ BB1CRFIV - - Check Valve CS1CXPV CB1CRWV/ CB1CRSV Gate Valve GS1CXV/ GS1CMV GB1CRV Globe Valve LS1CXV LB1CRV NS1CXV/ NS1CMV - Ball Valve Butterfly Valve Needle Valve 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156, CL 300, RF, Gasket ASME B16.20 Bolt/Nuts ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 18mm 20mm 20mm 22mm 22mm 24mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 80 (Note7) A234 Gr. WPB, BW, ASME B16.9,NACE MR0175/ISO15156 MSS-SP-97,NACE MR0175/ISO15156 Weldolet 26”-36” Butt Weld Fittings: (Note1) A105, CL 6000, SW, Sockolet Design code 32. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0CA6N Service To be specified Piping Class: B0CA6N (Note3) Material Carbon Steel(NACEMR0175 /ISO15156) ASME B16.5 Pressure Class 300 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 100 150 200 Design Pressure (kPaG) 5110 5110 4660 4510 4380 Size 1/2”-1 1/2” Pipe THK XXS Material 2”-4” ASME B31.3 6”-8” 10”-24” A106 Gr. B SMLS, PE, ASME SCH 160 SCH80 SCH 60 A106 Gr. B SMLS, BE, ASME B36.10M,NACE B36.10M,NACE MR0175/ISO15156 MR0175/ISO15156 Fittings Forged Fittings: Elbow, Tee, A105, CL 9000, SW, ASME B16.11,NACE Reducer MR0175/ISO15156 Sockolet A105, BW, MSS-SP-97,NACE MR0175/ISO15156 A105, BW, MSS-SP-97,NACE MR0175/ISO15156 - MR0175/ISO15156 (Note1) A105, CL 9000, SW, ASME B16.11,NACE Coupling - MR0175/ISO15156 A105, CL 6000, NPT, ASME B16.11,NACE Cap MR0175/ISO15156 A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156 A105,NPT,ASME B16.11,NACE Plug - MR0175/ISO15156 Spectacle Blind, Spacer & Blanks (Note7) A234 Gr. WPB, BW, ASME B16.9,NACE MR0175/ISO15156 A105, PE, L=100mm, NACE Pipe Nipple 26”-36” Butt Weld Fittings: (Note1) - Weldolet Design code A105, CL 300, RF, ASME B16.48,NACE MR0175/ISO15156 A105, CL 300, SW-RF, ASME B16.5,NACE A105, CL 300, WN-RF, ASME B16.5, Flange(Note11) MR0175/ISO15156 Blind Flange NACE MR0175/ISO15156 (Note1) A105, CL 300, RF, ASME B16.5,NACE MR0175/ISO15156 (Note11) Valves(Note11) Ball Valve API 602 CL 800 ASME B16.34 CL 300 BS1CXIQV/ BS1CMIQV BB1CRRIQV/ BB1CRFIQV Butterfly Valve - - Check Valve CS1CXPQV CB1CRWQV/ CB1CRSQV Gate Valve GS1CXQV/ GS1CMQV GB1CRQV Globe Valve LS1CXQV LB1CRQV NS1CXQV/ NS1CMQV - Needle Valve 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156, CL 300, RF, Gasket ASME B16.20 Bolt/Nuts ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 22mm 22mm 24mm 25mm 26mm 27mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 81 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 33. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0CA3Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class 300 Corrosion Allowance: 3mm NDT Refer to Specification of Piping Inspection B0CA3Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 100 150 200 Design Pressure (kPaG) 5110 5110 4660 4510 4380 Size 1/2”-1 1/2” Pipe THK SCH 160 Material A106 Gr. B SMLS, PE, ASME B36.10M Fittings A105, CL 6000, SW, ASME B16.11 Reducer Sockolet ASME B31.3 2”-8” 10”-16” 18”-24” 26”-36” SCH 80 XS SCH 40 (Note7) A106 Gr. B SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, Design code Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 A105, CL 6000, SW, MSS-SP-97 Weldolet - Coupling A105, BW, MSS-SP-97 A105, CL 6000, SW, ASME B16.11 A105, CL 6000, NPT, Cap A234 Gr. WPB, BW, ASME B16.9 ASME B16.11 Plug - A105,NPT,ASME B16.11 Spectacle Blind, Spacer & Blanks Flange(Note11) A105, CL 300, RF, ASME B16.48 A105, CL 300, SW-RF, SME B16.5 Blind Flange - A105, CL 300, WN-RF, ASME B16.5 (Note1) A105, CL 300, RF, ASME B16.5 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 300 Ball Valve BS1CXI / BS1CMI BB1CRRI / BB1CRFI Butterfly Valve - - Check Valve CS1CXP CB1CRW / CB1CRS Gate Valve GS1CX / GS1CM GB1CR Globe Valve LS1CX LB1CR Needle Valve NS1CX / NS1CM - Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 300, RF, ASME B16.20 Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 18mm 20mm 20mm 22mm 22mm 24mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 82 34. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0CA6Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class 300 Corrosion Allowance: 6mm NDT Refer to Specification of Piping Inspection B0CA6Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 100 150 200 Design Pressure (kPaG) 5110 5110 4660 4510 4380 Size 1/2”-1 1/2” Pipe THK XXS Material A106 Gr. B SMLS, PE, ASME B36.10M Fittings A105, CL 9000, SW, ASME B16.11 Reducer Sockolet - Weldolet A105, BW, MSS-SP-97 Coupling A105, CL 9000, SW, ASME B16.11 A105, CL 6000, NPT, Cap 6”-8” 10”-24” 26”-36” SCH 160 SCH80 SCH 60 (Note7) A106 Gr. B SMLS, BE, ASME B36.10M Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 A105, BW, MSS-SP-97 A234 Gr. WPB, BW, ASME B16.9 ASME B16.11 Plug ASME B31.3 2”-4” Forged Fittings: Elbow, Tee, A105, NPT,ASME B16.11 Spectacle Blind, Spacer & Blanks Flange(Note11) - A105, CL 300, RF, ASME B16.48 A105, CL 300, SW-RF, SME B16.5 Blind Flange Design code A105, CL 300, WN-RF, ASME B16.5 (Note1) A105, CL 300, RF, ASME B16.5 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 300 BS1CXIQ / BS1CMIQ BB1CRRIQ / BB1CRFIQ Butterfly Valve - - Check Valve CS1CXPQ CB1CRWQ / CB1CRSQ Gate Valve GS1CXQ / GS1CMQ GB1CRQ Globe Valve LS1CXQ LB1CRQ Needle Valve NS1CXQ / NS1CMQ - Ball Valve Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 300, RF, ASME B16.20 Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 22mm 22mm 24mm 25mm 26mm 27mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 83 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 35. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0AA3L Service To be specified Material Low Temperature Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection B0AA3L ASME B16.5 Pressure Class 300 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 5110 5110 5010 4660 4510 Design code ASME B31.3 Size 1/2”-1 1/2” 2” -4” 6”-24” 26”-36” Pipe THK SCH 160 SCH 80 SCH 40 (Note7) Material A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings A333 Gr. 3 SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 6000, SW, ASME B16.11 Reducer Sockolet Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, CL 6000, SW, MSS SP 97 Weldolet - A350 LF3 CL2, BW, MSS-SP-97 Pipe Nipple A350 LF3 CL2, PE, L=100mm (Note1) - Coupling A350 LF3 CL2, CL 6000, SW, ASME B16.11 - Cap A350 LF3 CL2, CL 6000, NPT, ASME B16.11 A420 WPL3, BW, ASME B16.9 Plug A350 LF3 CL2,NPT, ASME B16.11 Spectacle Blind, Spacer & Blanks Flange(Note11) A350 LF3 CL2, CL 300, RF, ASME B16.48 A350 LF3 CL2, CL 300, SW-RF, ASME B16.5 Blind Flange - A350 LF3 CL2, WN-RF, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 300, RF, ASME B16.5 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 300 Ball Valve BS9CXI / BS9CMI BB9CRRI / BB9CRFI Butterfly Valve - - Check Valve CS9CXP CB9CRW / CB9CRS Gate Valve GS9CX / GS9CM GB9CR Globe Valve LS9CX LB9CR Needle Valve NS9CX / NS9CM - Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 300, RF, ASME B16.20 ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 18mm 18mm 20mm 20mm 22mm 22mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 84 36. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0AA6L Service To be specified Material Low Temperature Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection B0AA6L ASME B16.5 Pressure Class 300 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 5110 5110 5010 4660 4510 Size 1/2”-1 1/2” Pipe THK XXS Material A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings 2” -3” SCH 160 A350 LF3 CL2, CL 6000, SW, ASME B16.11 Reducer Sockolet ASME B31.3 8” 10” SCH 120 SCH 80 - A350 LF3 CL2, BW, MSS SP 97 Pipe Nipple A350 LF3 CL2, PE, L=100mm (Note1) - Coupling A350 LF3 CL2, CL 6000, SW, ASME B16.11 - Cap A350 LF3 CL2, CL 6000, NPT, ASME B16.11 A420 WPL3, BW, ASME B16.9 Plug A350 LF3 CL2, NPT, ASME B16.11 Flange(Note11) Blind Flange SCH 60 SCH 60 (Note7) A420 WPL3, BW, ASME B16.9 Weldolet Spacer & Blanks 26”-36” Butt Weld Fittings: (Note1) - Spectacle Blind, 12”-24” A333 Gr. 3 SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, 4” -6” Design code A350 LF3 CL2, BW, MSS-SP-97 - A350 LF3 CL2, CL 300, RF, ASME B16.48 A350 LF3 CL2, CL 300, SW-RF, ASME B16.5 A350 LF3 CL2, WN-RF, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 300, RF, ASME B16.5 (Note11) Valves(Note11) Ball Valve API 602 CL 800 ASME B16.34 CL 300 BS9CXIQ / BS9CMIQ BB9CRRIQ / BB9CRFIQ Butterfly Valve - - Check Valve CS9CXPQ CB9CRWQ / CB9CRSQ Gate Valve GS9CXQ / GS9CMQ GB9CRQ Globe Valve LS9CXQ LB9CRQ Needle Valve NS9CXQ / NS9CMQ - Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 300, RF, ASME B16.20 ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 20m 21m 22m 23m 24m 25m (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 85 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 37. Service ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0AA3O To be specified Low Temperature Carbon Steel(NACE MR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection Piping Class: B0AA3O(Note3) ASME B16.5 Pressure Class 300 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 5110 5110 5010 4660 4510 Design code ASME B31.3 Size 1/2”-1 1/2” 2” -4” 6”-24” 26”-36” Pipe THK SCH 160 SCH 80 SCH 40 (Note7) A333 Gr. 3 SMLS, PE, ASME B36.10M, NACE A333 Gr. 3 SMLS, BE, ASME B36.10M NACE Material MR0175/ISO15156 Fittings MR0175/ISO15156 Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 6000, SW, ASME B16.11, Reducer NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, CL 6000, SW, MSS SP 97, Sockolet - NACE MR0175/ISO15156 Weldolet - A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, CL 6000, SW, ASME B16.11, Coupling - NACE MR0175/ISO15156 A350 LF3 CL2, CL 6000, NPT, ASME B16.11, Cap NACE MR0175/ISO15156 A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2,NPT, ASME B16.11, NACE Plug - MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 300, RF, ASME B16.48, NACE MR0175/ISO15156 A350 LF3 CL2, CL 300, SW-RF, ASME B16.5, A350 LF3 CL2, CL 300, WN-RF, ASME B16.5 , NACE Flange(Note11) NACE MR0175/ISO15156 Blind Flange MR0175/ISO15156 (Note1) ASTM A350 LF3 CL2, CL 300, RF, ASME B16.5, NACE MR0175/ISO15156 (Note11) Valves(Note11) Ball Valve API 602 CL 800 ASME B16.34 CL 300 BS9CXIV / BS9CMIV BB9CRRIV / BB9CRFIV Butterfly Valve - - Check Valve CS9CXPV CB9CRWV / CB9CRSV Gate Valve GS9CXV / GS9CMV GB9CRV Globe Valve LS9CXV LB9CRV Needle Valve NS9CXV / NS9CMV - 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156, CL 300, RF, Gasket ASME B16.20 ASTM A320 Gr.L7M Stud Bolt / A194 Gr.7ML HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts white color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 18mm 18mm 20mm 20mm 22mm 22mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 86 38. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS B0AA6O Piping Class: BD, FL, FG Material Low Temperature Carbon Steel(NACE MR0175/ISO15156) NDT Refer to Specification of Piping Inspection B0AA6O(Note3) ASME B16.5 Pressure Class 300 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 5110 5110 5010 4660 4510 Size 1/2”-1 1/2” Pipe THK XXS 2” -3” Design code ASME B31.3 4” -6” SCH 160 SCH 120 8” 10” 12”-24” 26”-36” SCH 80 SCH 60 SCH 60 (Note7) A333 Gr. 3 SMLS, PE, ASME B36.10M, NACE A333 Gr. 3 SMLS, BE, ASME B36.10M NACE Material MR0175/ISO15156 Fittings MR0175/ISO15156 Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 6000, SW, ASME B16.11, Reducer NACE MR0175/ISO15156 Sockolet Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, BW, MSS SP 97, NACE Weldolet MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, CL 6000, SW, ASME B16.11, Coupling - NACE MR0175/ISO15156 A350 LF3 CL2, CL 6000, NPT, ASME B16.11, Cap NACE MR0175/ISO15156 A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2,NPT, ASME B16.11, NACE Plug - MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 300, RF, ASME B16.48, NACE MR0175/ISO15156 A350 LF3 CL2, CL 300, SW-RF, ASME B16.5, A350 LF3 CL2, CL 300, WN-RF, ASME B16.5 , NACE Flange(Note11) NACE MR0175/ISO15156 Blind Flange MR0175/ISO15156 (Note1) ASTM A350 LF3 CL2, CL 300, RF, ASME B16.5, NACE MR0175/ISO15156 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 300 BS9CXIQV / BS9CMIQV BB9CRRIQV / BB9CRFIQV - - Check Valve CS9CXPQV CB9CRWQV / CB9CRSQV Gate Valve GS9CXQV / GS9CMQV GB9CRQV Globe Valve LS9CXQV LB9CRQV Needle Valve NS9CXQV / NS9CMQV - Ball Valve Butterfly Valve 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156, CL 300, RF, Gasket ASME B16.20 ASTM A320 Gr.L7M Stud Bolt / A194 Gr.7ML HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts white color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 20mm 21mm 22mm 23mm 24mm 25mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 87 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 39. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0SA0L Service To be specified Piping Class: Material Stainless Steel ASME B16.5 Pressure Class 300 Corrosion Allowance: 0mm NDT Refer to Specification of Piping Inspection B0SA0L Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 4140 4140 4000 3480 3140 Design code ASME B31.3 Size 1/2"-1 1/2" 2”-4” 6”-18" 20”-24" 26”-36” Pipe THK SCH 80S SCH 40S SCH 40S XS (Note7) Material A312 TP316L SMLS, PE, ASME B36.19M Fittings A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) Forged Fittings: Elbow, Tee, A182 F316L, CL 3000, SW, ASME B16.11 Reducer Sockolet Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL 3000, SW, MSS-SP-97 Weldolet - Coupling A182 F316L, CL 3000, SW, ASME B16.11 Cap A182 F316L, CL 3000, NPT, ASME B16.11 Plug A182 F316L,NPT, ASME B16.11 Spectacle Blind, A182 F316L, BW, MSS-SP-97 A403 Gr. WP 316L, BW, ASME B16.9 - A182 F316L, CL 300, RF, ASME B16.48 Spacer & Blanks Flange(Note11) A182 F316L, CL 300, SW-RF, ASME B16.5 Blind Flange A182 F316L, CL 300, WN-RF, ASME B16.5 (Note1) A182 F316L, CL 300, RF, ASME B16.5 (Note11) Valves(Note11) Ball Valve API 602 CL 800 ASME B16.34 CL 300 BS2CXZI / BS2CMZI BB2CRRZI / BB2CRFZI Butterfly Valve - - Check Valve CS2CXPZ CB2CRWZ / CB2CRSZ Gate Valve GS2CXZ / GS2CMZ GB2CRZ Globe Valve LS2CXZ LB2CRZ Needle Valve NS2CXZ / NS2CMZ - Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 300, RF, ASME B16.20 ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 14mm SCH30 SCH30 SCH40 18mm SCH40 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 88 40. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0SA0N Service To be specified Piping Class: B0SA0N(Note3) Material Stainless Steel(NACE MR0175 /ISO15156) ASME B16.5 Pressure Class 300 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 50 100 150 Design Pressure (kPaG) 4140 4140 4000 3480 3140 Design code ASME B31.3 Size 1/2"-1 1/2" 2”-4” 6”-18" 20”-24" 26”-36” Pipe THK SCH 80S SCH 40S SCH 40S XS (Note 7) A312 TP316L SMLS, PE, Material ASME B36.19M,NACE MR0175/ISO15156 Fittings A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6), NACE MR0175/ISO15156 Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A182 F316L, CL 3000, SW, ASME A403 Gr. WP 316L, BW, ASME B16.9,NACE Reducer B16.11,NACE MR0175/ISO15156 MR0175/ISO15156 A182 F316L, CL 3000, SW, Sockolet - MSS-SP-97,NACE MR0175/ISO15156 Weldolet - A182 F316L, BW, MSS-SP-97,NACE MR0175/ISO15156 A182 F316L, CL 3000, SW, ASME Coupling - B16.11,NACE MR0175/ISO15156 Cap A182 F316L, CL 3000, NPT, ASME A403 Gr. WP 316L, BW, ASME B16.9,NACE B16.11,NACE MR0175/ISO15156 MR0175/ISO15156 A182 F316L, NPT, ASME B16.11,NACE Plug - MR0175/ISO15156 Spectacle Blind, A182 F316L, CL 300, RF, ASME B16.48,NACE MR0175/ISO15156 Spacer & Blanks Flange(Note11) Blind Flange A182 F316L, CL 300, SW-RF, ASME A182 F316L, CL 300, WN-RF, ASME B16.5,NACE B16.5,NACE MR0175/ISO15156 MR0175/ISO15156 (Note1) A182 F316L, CL 300, RF, ASME B16.5,NACE MR0175/ISO15156 (Note11) Valves(Note11) Ball Valve API 602 CL 800 ASME B16.34 CL 300 BS2CXIV / BS2CMIV BB2CRRIV / BB2CRFIV Butterfly Valve - - Check Valve CS2CXPV CB2CRWV / CB2CRSV Gate Valve GS2CXV / GS2CMV GB2CRV Globe Valve LS2CXV LB2CRV Needle Valve NS2CXV / NS2CMV - 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156, CL 300, RF, Gasket ASME B16.20 ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 14mm SCH30 SCH30 SCH40 18mm SCH40 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 89 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 41. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0SA0O Service To be specified Piping Class: B0SA0O(Note3) Material Stainless Steel(NACE MR0175 /ISO15156) ASME B16.5 Pressure Class 300 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 4140 4140 4000 3480 3140 Design code ASME B31.3 Size 1/2"-1 1/2" 2”-4” 6”-18" 20”-24" 26”-36” Pipe THK SCH 80S SCH 40S SCH 40S XS (Note 7) A312 TP316L SMLS, PE, ASME B36.19M, Material NACE MR0175/ISO15156 Fittings A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6), NACE MR0175/ISO15156 Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A182 F316L, CL 3000, SW, ASME B16.11, A403 Reducer NACE MR0175/ISO15156 MR0175/ISO15156 Gr. WP 316L, A182 F316L, CL 3000, SW, MSS-SP-97, NACE Sockolet - A182 F316L, CL 3000, NPT, ASME B16.11, A403 NACE MR0175/ISO15156 MR0175/ISO15156 Gr. WP 316L, A182 F316L, NPT, ASME B16.11, NACE Plug BW, ASME B16.9, A182 F316L, CL 300, RF, ASME B16.48, NACE MR0175/ISO15156 Spacer & Blanks Flange(Note11) Blind Flange A182 F316L, CL 300, SW-RF, ASME B16.5, A182 F316L, CL 300, WN-RF, ASME B16.5 (Note1), NACE NACE MR0175/ISO15156 MR0175/ISO15156 A182 F316L, CL 300, RF, ASME B16.5, NACE MR0175/ISO15156 (Note11) Valves(Note11) Ball Valve API 602 CL 800 ASME B16.34 CL 300 BS2CXZIV / BS2CMZIV BB2CRRZIV / BB2CRFZIV Butterfly Valve - - Check Valve CS2CXPZV CB2CRWZV / CB2CRSZV Gate Valve GS2CXZV / GS2CMZV GB2CRZV Globe Valve LS2CXZV LB2CRZV Needle Valve NS2CXZV / NS2CMZV - Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 300, RF, ASME B16.20 ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 14mm SCH30 SCH30 SCH40 18mm SCH40 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 90 NACE - MR0175/ISO15156 Spectacle Blind, NACE - NACE MR0175/ISO15156 Cap B16.9, A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156 A182 F316L, CL 3000, SW, ASME B16.11, Coupling ASME - MR0175/ISO15156 Weldolet BW, 42. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0SA0Z Service To be specified Piping Class: Material Stainless Steel ASME B16.5 Pressure Class 300 Corrosion Allowance: 0mm NDT Refer to Specification of Piping Inspection B0SA0Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 50 100 150 Design Pressure (kPaG) 4140 4140 4000 3480 3140 Design code ASME B31.3 Size 1/2"-1 1/2" 2”-4” 6”-18" 20”-24" 26”-36” Pipe THK SCH 80S SCH 40S SCH 40S XS (Note 7) Material A312 TP316L SMLS, PE, ASME B36.19M Fittings A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6). Forged Fittings: Elbow, Tee, A182 F316L, CL 3000, SW, ASME B16.11 Reducer Sockolet Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL 3000, SW, MSS-SP-97 Weldolet - Coupling A182 F316L, CL 3000, SW, ASME B16.11 Cap A182 F316L, CL 3000, NPT, ASME B16.11 Plug A182 F316L, NPT, ASME B16.11 Spectacle Blind, A182 F316L, BW, MSS-SP-97 A403 Gr. WP 316L, BW, ASME B16.9 - A182 F316L, CL 300, RF, ASME B16.48 Spacer & Blanks Flange(Note11) A182 F316L, CL 300, SW-RF, ASME B16.5 Blind Flange A182 F316L, CL 300, WN-RF, ASME B16.5 (Note1) A182 F316L, CL 300, RF, ASME B16.5 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 300 Ball Valve BS2CXI / BS2CMI BB2CRRI / BB2CRFI Butterfly Valve - - Check Valve CS2CXP CB2CRW / CB2CRS Gate Valve GS2CX / GS2CM GB2CR Globe Valve LS2CX LB2CR Needle Valve NS2CX / NS2CM - Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 300, RF, ASME B16.20 ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 14mm SCH30 SCH30 SCH40 18mm SCH40 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 91 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 92 43. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0SI0N Service To be specified Material Duplex Stainless Steel (NACE MR0175/ISO15156) NDT Piping Class: Refer to Specification of Piping Inspection B0SI0N(Note3) ASME B16.5 Pressure Class 300 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -50 38 50 100 150 200 Design Pressure (kPaG) 5170 5170 5170 5070 4590 4270 2" 3”-8" 10"-24" Size 1/2"-1 1/2" Pipe THK SCH 80S A790 UNS S31803 SMLS, PE, ASME Material B36.19M,NACE MR0175/ISO15156 Fittings A182 F51, CL 3000, SW, ASME Reducer B16.11,NACE MR0175/ISO15156 A182 F51, CL 3000, SW, Sockolet MSS-SP-97,NACE MR0175/ISO15156 Weldolet - (Note 7) SCH 40S A928 UNS S31803 WELDED , BE, BE, ASME B36.19M,NACE ASME B36.19M NACE MR0175/ISO15156 MR0175/ISO15156 (Note6) Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9,NACE MR0175/ISO15156 A182 F51, BW, MSS-SP-97,NACE MR0175/ISO15156 A182 F51, CL 3000, SW,ASME Coupling - B16.11,NACE MR0175/ISO15156 Cap - A815 UNS S31803, BW, ASME B16.9,NACE MR0175/ISO15156 A182 F51, NPT,ASME B16.11,NACE Plug - MR0175/ISO15156 Spectacle Blind, 26”-36” SCH 40S SCH 10S A790 UNS S31803 SMLS, Forged Fittings: Elbow, Tee, ASME B31.3 A182 F51, CL 300, RF, ASME B16.48,NACE MR0175/ISO15156 Spacer & Blanks Flange(Note11) Blind Flange A182 F51, CL 300, SW-RF,ASME A182 F51, CL 300, WN-RF, ASME B16.5, B16.5,NACE MR0175/ISO15156 NACE MR0175/ISO15156 (Note1) A182 F51, CL 300, RF, ASME B16.5,NACE MR0175/ISO15156 (Note11) Valves(Note11) Ball Valve API 602 CL 800 ASME B16.34 CL 300 BS8EXIV/ BS8EMIV BB8ERRIV/ BB8ERFIV Butterfly Valve - - Check Valve CS8EXPV CB8ERWV/CB8ERSV Gate Valve GS8EMV/ GS8EXV GB8ERV Globe Valve LS8EXV LB8ERV Needle Valve NS8EXV / NS8EMV - 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156, CL 300, RF, Gasket ASME B16.20 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating Bolt/Nuts with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” XS XS XS XS XS SCH30 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 93 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 44. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0SI0Z Service To be specified Material Duplex Stainless Steel NDT Piping Class: Refer to Specification of Piping Inspection B0SI0Z ASME B16.5 Pressure Class 300 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -50 38 50 100 150 200 Design Pressure (kPaG) 5170 5170 5170 5070 4590 4270 Size 1/2"-1 1/2" Pipe THK SCH 80S Material 2" 3”-8" (Note 7) SCH 40S A928 UNS S31803 WELDED , BE, ASME B36.19M ASME B36.19M ASME B36.19M(Note6) Forged Fittings: A182 F51, CL 3000, SW, Reducer ASME B16.11 Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9 A182 F51, CL 3000, SW, - MSS-SP-97 Weldolet - A182 F51, BW, MSS-SP-97 A182 F51, CL 3000, SW,ASME - B16.11 Cap - Plug A815 UNS S31803, BW, ASME B16.9 A182 F51, NPT,ASME B16.11 Spectacle Blind, - A182 F51, CL 300, RF, ASME B16.48 Spacer & Blanks A182 Flange(Note11) F51, CL 300, SW-RF,ASME B16.5 Blind Flange A182 (Note11) A182 F51, CL 300, WN-RF, ASME B16.5 (Note1) F51, CL 300, RF, ASME B16.5 Valves(Note11) API 602 CL 800 ASME B16.34 CL 300 Ball Valve BS8EXI / BS8EMI BB8ERRI / BB8ERFI Butterfly Valve - - Check Valve CS8EXP CB8ERW / CB8ERS Gate Valve GS8EM / GS8EX GB8ER Globe Valve LS8EX LB8ER Needle Valve NS8EX / NS8EM - Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 300, RF, ASME B16.20 ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” XS XS XS XS XS SCH30 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 94 26”-36” SCH 40S SCH 10S A790 UNS S31803 SMLS, BE, Elbow, Tee, Coupling 10"-24" A790 UNS S31803 SMLS, PE, Fittings Sockolet ASME B31.3 45. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0SK0N Service To be specified Material Duplex Stainless Steel (NACE MR0175/ISO15156) NDT Piping Class: Refer to Specification of Piping Inspection B0SK0N(Note3) ASME B16.5 Pressure Class 300 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -50 38 50 100 150 200 Design Pressure (kPaG) 5170 5170 5170 5070 4590 4270 2" 3”-8" 10"-24" Size 1/2"-1 1/2" Pipe THK SCH 80S A790 UNS S32750 SMLS, PE, ASME Material B36.19M,NACE MR0175/ISO15156 Fittings A182 F53, CL 3000, SW, ASME Reducer B16.11,NACE MR0175/ISO15156 A182 F53, CL 3000, SW, Sockolet MSS-SP-97,NACE MR0175/ISO15156 Weldolet - (Note 7) SCH 40S A928 UNS S32750 WELDED , BE, BE, ASME B36.19M,NACE ASME B36.19M NACE MR0175/ISO15156 MR0175/ISO15156 (Note6) Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9,NACE MR0175/ISO15156 A182 F53, BW, MSS-SP-97,NACE MR0175/ISO15156 A182 F53, CL 3000, SW,ASME Coupling - B16.11,NACE MR0175/ISO15156 Cap - A815 UNS S32750, BW, ASME B16.9,NACE MR0175/ISO15156 A182 F53,NPT,ASME B16.11,NACE Plug - MR0175/ISO15156 Spectacle Blind, 26”-36” SCH 40S SCH 10S A790 UNS S32750 SMLS, Forged Fittings: Elbow, Tee, ASME B31.3 A182 F53, CL 300, RF, ASME B16.48,NACE MR0175/ISO15156 Spacer & Blanks Flange(Note11) Blind Flange A182 F53, CL 300, SW-RF,ASME A182 F53, CL 300, WN-RF, ASME B16.5, B16.5,NACE MR0175/ISO15156 NACE MR0175/ISO15156 (Note1) A182 F53, CL 300, RF, ASME B16.5,NACE MR0175/ISO15156 (Note11) Valves(Note11) Ball Valve API 602 CL 800 ASME B16.34 CL 300 BS10PXIV/ BS10PMIV BB10PRRIV/ BB10PRFIV Butterfly Valve - - Check Valve CS10PXPV CB10PRWV/CB10PRSV Gate Valve GS10PMV/ GS10PXV GB10PRV Globe Valve LS10PXV LB10PRV Needle Valve NS10PXV / NS10PMV - 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156, CL 300, RF, Gasket ASME B16.20 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating Bolt/Nuts with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” STD STD STD STD XS XS (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 95 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 46. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS B0SK0Z Service To be specified Material Duplex Stainless Steel NDT Piping Class: B0SK0Z ASME B16.5 Pressure Class Refer to Specification of Piping Inspection Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -50 38 50 100 150 200 Design Pressure (kPaG) 5170 5170 5170 5070 4590 4270 Size 1/2"-1 1/2" Pipe THK SCH 80S Material 2" 3”-8" ASME B36.19M ASME B36.19M ASME B36.19M(Note6) A182 F53, CL 3000, SW, Reducer ASME B16.11 Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9 A182 F53, CL 3000, SW, - MSS-SP-97 Weldolet - A182 F53, BW, MSS-SP-97 A182 F53, CL 3000, SW,ASME - B16.11 Cap - A815 UNS S32750, BW, ASME B16.9 A182 F53,NPT,ASME B16.11 Spectacle Blind, - A182 F53, CL 300, RF, ASME B16.48 Spacer & Blanks A182 Flange(Note11) F53, CL 300, SW-RF,ASME B16.5 Blind Flange A182 (Note11) Valves(Note11) Ball Valve A182 F53, CL 300, WN-RF, ASME B16.5 (Note1) F53, CL 300, RF, ASME B16.5 API 602 CL 800 ASME B16.34 CL 300 BS10PXI / BS10PMI BB10PRRI / BB10PRFI Butterfly Valve - - Check Valve CS10PXP CB10PRW / CB10PRS Gate Valve GS10PM / GS10PX GB10PR Globe Valve LS10PX LB10PR Needle Valve NS10PX / NS10PM - Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 300, RF, ASME B16.20 ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” STD STD STD STD XS XS (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 96 26”-36” (Note 7) SCH 40S A928 UNS S32750 WELDED , BE, Elbow, Tee, Plug 10"-24" SCH 40S SCH 10S A790 UNS S32750 SMLS, BE, Forged Fittings: Coupling ASME B31.3 A790 UNS S32750 SMLS, PE, Fittings Sockolet 300 47. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS D0CA2G Service To be specified Material Carbon Steel (GALV.) NDT Piping Class: D0CA2G ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 600 Corrosion Allowance: 1.5mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) 38 50 100 150 FM200 NFPA 2001/ ASME B31.3 Design Pressure (kPaG) 10210 10020 9320 9020 OTHER ASME B31.3 Size 1/2”-1-1/2” 2”-3” 4”-10” 12”-24” Pipe THK SCH 80 SCH 80 SCH 80 SCH100 Material A106 Gr. B SMLS, PE, GALV.,ASME B36.10M Fittings Elbow, Tee, Reducer Forged Fittings: A105, CL 3000, SW, GALV.,MSS-SP-97 Weldolet - Plug Spectacle Blind, Spacer & Blanks Flange Blind Flange Butt Weld Fittings: (Note1, 2) A105, CL 3000, SW, GALV.,ASME B16.11 A234 Gr. WPB, BW, GALV., ASME B16.9 Sockolet Coupling, Cap A106 Gr. B SMLS, BE, GALV.,ASME B36.10M (Note2) A105, BW, GALV.,MSS-SP-97 A105, CL 3000, - SW or NPT, GALV.,ASME B16.11 A105,NPT, GALV.,ASME B16.11 A105, CL 600, RF, GALV., ASME B16.48 A105, CL 600,SW-RF, GALV., ASME B16.5 A105, CL600, WN-RF, GALV.,ASME B16.5 (Note1, 2) A105, CL 600, RF,GALV., ASME B16.5 Valves API 602 CL 800 ASME B16.34 CL 600 Ball Valve BS2CSI BD1CRRGI / BD1CRFGI Check Valve CS2CSP CD1CRWG / CD1CRSG Gate Valve GS2CS GD1CRG Globe Valve LS2CS LD1CRG Needle Valve NS2CS - Gasket Bolt/Nuts 4.5mm thickness, “CGI” 316L S.S Spiral Wound Non-Asbestos filler Dope: Graphite & Oil with 316L S.S inner & outer ring, CL 600, RF, ASME B16.20 ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. with Sherardizing coatings Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) Hot dip galvanization after fabrication of piping spools with both flange ends. (3) NPT connection could only be used for connection with instrument, drain & vent valve closure. 97 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 48. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS D0CA3N Service To be specified Material Carbon Steel(NACE MR0175 /ISO15156) Piping Class: ASME B16.5 Pressure Class D0CA3N(Note3) 600 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 38 Design Pressure (kPaG) 10210 10020 9320 9020 10210 Design code ASME B31.3 Size 1/2”-1 1/2” 2" 3"-8" 10"-24" 26”-36” Pipe THK SCH 160 SCH 160 SCH 80 SCH 80 (Note 7) Material A106 Gr. B SMLS, BE, ASME B36.10M,NACE MR0175/ISO15156 Fittings Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A105, CL 6000, SW,ASME B16.11 NACE A234 Gr. WPB, BW, ASME B16.9, Reducer MR0175/ISO15156 NACE MR0175/ISO15156 A105, CL 6000, SW,MSS-SP-97 A105, BW, MSS-SP-97, NACE MR0175/ISO15156 NACE MR0175/ISO15156(Note1) Weldolet Threadolet - - A105, CL 6000, SW,ASME B16.11,NACE Coupling - MR0175/ISO15156 A105., CL 6000, NPT, ASME B16.11,NACE Cap MR0175/ISO15156 A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156 A105, NPT,ASME B16.11,NACE Plug - MR0175/ISO15156 Spectacle Blind, A105, CL 600, RF, ASME B16.48,NACE MR0175/ISO15156 Spacer & Blanks Flange(Note11) A105, CL 600, WN-RF, ASME B16.5,NACE MR0175/ISO15156 (Note1) Blind Flange A105, CL 600, RF, ASME B16.5,NACE MR0175/ISO15156 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 600 BS1CXIV / BS1CMIV BD1CRRIV/ BD1CRFIV Butterfly Valve - - Check Valve CS1CXPV CD1CRWV/ CD1CRSV Gate Valve GS1CXV / GS1CMV GD1CRV Globe Valve LS1CXV LD1CRV NS1CXV/ NS1CMV - Ball Valve Needle Valve 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156, CL 600, RF, Gasket ASME B16.20 Bolt/Nuts ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 32mm 34mm 36mm 38mm 40mm 42mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 98 49. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS D0CA6N Piping Class: To be specified D0CA6N Note3) Material Carbon Steel(NACE MR0175 /ISO15156) ASME B16.5 Pressure Class 600 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 38 Design Pressure (kPaG) 10210 10020 9320 9020 10210 Size ASME B31.3 1/2” 3/4” 1”-1 1/2” 2" 3"-4" 6"-8" 10"-24" 26”-36” - - XXS XXS SCH 160 SCH 120 SCH 100 (Note 7) Pipe THK Material Design code A106 Gr. B SMLS, BE, ASME B36.10M,NACE MR0175/ISO15156 Fittings Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A105, CL 9000, SW,ASME B16.11 NACE A234 Gr. WPB, BW, ASME B16.9, Reducer MR0175/ISO15156 NACE MR0175/ISO15156 A105, BW,MSS-SP-97 A105, BW, MSS-SP-97, NACE MR0175/ISO15156 NACE MR0175/ISO15156(Note1) Weldolet Threadolet - - A105, CL 9000, SW,ASME B16.11,NACE Coupling - MR0175/ISO15156 A105., CL 6000, NPT, ASME B16.11,NACE Cap MR0175/ISO15156 A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156 A105, NPT,ASME B16.11,NACE Plug - MR0175/ISO15156 Spectacle Blind, A105, CL 600, RF, ASME B16.48,NACE MR0175/ISO15156 Spacer & Blanks Flange(Note11) A105, CL 600, WN-RF, ASME B16.5,NACE MR0175/ISO15156 (Note1) Blind A105, CL 600, RF, ASME B16.5,NACE MR0175/ISO15156 Flange(Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 600 BS1CXIQV / BS1CMIQV BD1CRRIQV/ BD1CRFIQV Butterfly Valve - - Check Valve CS1CXPQV CD1CRWQV/ CD1CRSQV Gate Valve GS1CXQV / GS1CMQV GD1CRQV Globe Valve LS1CXQV LD1CRQV Needle Valve NS1CXQV/ NS1CMQV - Ball Valve 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156, CL 600, RF, Gasket ASME B16.20 Bolt/Nuts ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 35mm 37mm 39mm 41mm 43mm 45mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 99 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 50. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS D0CA3Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class 600 Corrosion Allowance: 3mm Radiography Refer to Specification of Piping Inspection D0CA3Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) 38 50 100 150 38 Design Pressure (kPaG) 10210 10020 9320 9020 10210 Size 1/2"-1 1/2" 2" 3"-8" 10”-24” 26”-36” Pipe THK SCH 160 SCH 160 SCH 80 SCH80 (Note 7) ASME B31.3 Material A106 Gr. B SMLS, PE,ASME B36.10M Fittings A106 Gr. B SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, A105, CL 6000, SW,ASME B16.11 Reducer Sockolet Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 A105, CL 6000, SW,MSS-SP-97 Weldolet - A105, BW, MSS-SP-97 Coupling A105, CL 6000, SW,ASME B16.11 - Cap A105, CL 6000, NPT,ASME B16.11 A234 Gr. WPB, BW, ASME B16.9 Plug A105, NPT,ASME B16.11 Spectacle Blind, - A105, CL 600, RF, ASME B16.48 Spacer & Blanks Flange(Note11) A105, CL 600, SW-RF, ASME B16.5 Blind Flange A105, CL 600, WN-RF, ASME B16.5 (Note1) A105, CL 600, RF, ASME B16.5 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 600 Ball Valve BS1CXI / BS1CMI BD1CRRI / BD1CRFI Check Valve CS1CXP CD1CRW / CD1CRS Gate Valve GS1CX / GS1CM GD1CR Globe Valve LS1CX LD1CR Needle Valve NS1CX / NS1CM - 4.5mm thickness, “CGI” 316L S.S Spiral Wound Non-Asbestos filler Dope: Graphite & Oil Gasket with 316L S.S inner & outer ring, CL 600, RF, ASME B16.20 Bolt/Nuts ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts with Sherardizing coatings Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 32mm 34mm 36mm 38mm 40mm 42mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 100 51. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS D0CA6Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class 600 Corrosion Allowance: 6mm Radiography Refer to Specification of Piping Inspection D0CA6Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) 38 50 100 150 38 Design Pressure (kPaG) 10210 10020 9320 9020 10210 ASME B31.3 Size 1/2” 3/4” 1”-1 1/2” 2" 3"-4" 6"-8" 10"-24" 26”-36” Pipe THK - - XXS XXS SCH 160 SCH 120 SCH 100 (Note 7) Material A106 Gr. B SMLS, PE,ASME B36.10M Fittings A106 Gr. B SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, A105, CL 9000, SW,ASME B16.11 Reducer Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 Sockolet - Weldolet A105, BW, MSS-SP-97 Coupling A105, CL 9000, SW,ASME B16.11 - Cap A105, CL 6000, NPT,ASME B16.11 A234 Gr. WPB, BW, ASME B16.9 Plug A105, NPT,ASME B16.11 Spectacle Blind, A105, BW, MSS-SP-97 - A105, CL 600, RF, ASME B16.48 Spacer & Blanks Flange(Note11) A105, CL 600, SW-RF, ASME B16.5 Blind A105, CL 600, WN-RF, ASME B16.5 (Note1) A105, CL 600, RF, ASME B16.5 Flange(Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 600 Ball Valve BS1CXIQ / BS1CMIQ BD1CRRIQ / BD1CRFIQ Check Valve CS1CXPQ CD1CRWQ / CD1CRSQ Gate Valve GS1CXQ / GS1CMQ GD1CRQ Globe Valve LS1CXQ LD1CRQ Needle Valve NS1CXQ / NS1CMQ - 4.5mm thickness, “CGI” 316L S.S Spiral Wound Non-Asbestos filler Dope: Graphite & Oil Gasket with 316L S.S inner & outer ring, CL 600, RF, ASME B16.20 Bolt/Nuts ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts with Sherardizing coatings Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 35mm 37mm 39mm 41mm 43mm 45mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 101 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 52. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS D0AA3L Service To be specified Material Low Temperature Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection D0AA3L ASME B16.5 Pressure Class 600 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 10210 10210 10020 9320 9020 Design code ASME B31.3 Size 1/2”-1 1/2” 2" 3"-8" 10”-24” 26”-36” Pipe THK SCH 160 SCH 160 SCH 80 SCH80 (Note 7) Material A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings A333 Gr. 3 SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 6000, SW, ASME B16.11 Reducer Sockolet Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, CL 6000, SW, MSS SP 97 Weldolet - A350 LF3 CL2, BW, MSS-SP-97 Coupling A350 LF3 CL2, CL 6000, SW, ASME B16.11 - Cap A350 LF3 CL2, CL 6000, NPT, ASME B16.11 A420 WPL3, BW, ASME B16.9 Plug A350 LF3 CL2, NPT, ASME B16.11 Spectacle Blind, - A350 LF3 CL2, CL 600, RF, ASME B16.48 Spacer & Blanks Flange(Note11) A350 LF3 CL2, CL 600, SW-RF, ASME B16.5 Blind Flange A350 LF3 CL2, WN-RF, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 600, RF, ASME B16.5 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 600 Ball Valve BS9CXI / BS9CMI BD9CRRI / BD9CRFI Butterfly Valve - - Check Valve CS9CXP CD9CRW / CD9CRS Gate Valve GS9CX / GS9CM GD9CR Globe Valve LS9CX LD9CR Needle Valve NS9CX / NS9CM - Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 600, RF, ASME B16.20 ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts green color. (Note3) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 32mm 34mm 36mm 38mm 40mm 42mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 102 53. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS D0AA6L Service To be specified Material Low Temperature Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection D0AA6L ASME B16.5 Pressure Class 600 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 10210 10210 10020 9320 9020 Size 1/2”-3/4” 1”-1 1/2” 2" - XXS XXS Pipe THK Material A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings 3"-4" A350 LF3 CL2, CL 6000, SW, ASME B16.11 Reducer ASME B31.3 10”-18” 20”-24” 26”-36” SCH 160 SCH120 SCH100 SCH80 (Note 7) 6”-8” A333 Gr. 3 SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, Design code Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9 Sockolet - Weldolet A350 LF3 CL2, BW, MSS-SP-97 A350 LF3 CL2, BW, MSS-SP-97 Coupling A350 LF3 CL2, CL 6000, SW, ASME B16.11 - Cap A350 LF3 CL2, CL 6000, NPT, ASME B16.11 A420 WPL3, BW, ASME B16.9 Plug A350 LF3 CL2, NPT, ASME B16.11 Spectacle Blind, - A350 LF3 CL2, CL 600, RF, ASME B16.48 Spacer & Blanks Flange(Note11) A350 LF3 CL2, CL 600, SW-RF, ASME B16.5 Blind A350 LF3 CL2, WN-RF, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 600, RF, ASME B16.5 Flange(Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 600 BS9CXIQ / BS9CMIQ BD9CRRIQ / BD9CRFIQ Butterfly Valve - - Check Valve CS9CXPQ CD9CRWQ / CD9CRSQ Gate Valve GS9CXQ / GS9CMQ GD9CRQ Globe Valve LS9CXQ LD9CRQ Needle Valve NS9CXQ / NS9CMQ - Ball Valve Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 600, RF, ASME B16.20 ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts green color. (Note3) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 32mm 34mm 36mm 38mm 40mm 42mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 103 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 54. Service ATTACHMENT B PIPING SYSTEM SPECIFICATIONS D0AA3O Piping Class: To be specified Low Temperature Carbon Steel(NACE MR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection D0AA3O(Note3) ASME B16.5 Pressure Class 600 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 10210 10210 10020 9320 9020 Design code ASME B31.3 Size 1/2”-1 1/2” 2" 3"-8" 10”-24” 26”-36” Pipe THK SCH 160 SCH 160 SCH 80 SCH80 (Note 7) A333 Gr. 3 SMLS, PE, ASME B36.10M, Material NACE MR0175/ISO15156 Fittings A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 6000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, CL 6000, SW, MSS SP Sockolet - 97, NACE MR0175/ISO15156 Weldolet - A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, CL 6000, SW, ASME Coupling - B16.11, NACE MR0175/ISO15156 Cap - A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, NPT, ASME B16.11, Plug - NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange (Note11) A350 LF3 CL2, CL 600, RF, ASME B16.48, NACE MR0175/ISO15156 A350 LF3 CL2, CL 600, SW-RF, ASME A350 LF3 CL2, B16.5, NACE MR0175/ISO15156 MR0175/ISO15156 (Note1) CL 600,WN-RF, ASME B16.5 , NACE ASTM A350 LF3 CL2, CL 600, RF, ASME B16.5 , NACE MR0175/ISO15156 Valves(Note11) API 602 CL 800 ASME B16.34 CL 600 BS9CXIV / BS9CMIV BD9CRRIV / BD9CRFIV - - Check Valve CS9CXPV CD9CRWV / CD9CRSV Gate Valve GS9CXV / GS9CMV GD9CRV Globe Valve LS9CXV LD9CRV Needle Valve NS9CXV / NS9CMV - Ball Valve Butterfly Valve 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156,CL 600, RF, Gasket ASME B16.20 Bolt/Nuts ASTM A320 Gr.L7M Stud Bolt / A194 Gr.7ML HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with white color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 32mm 34mm 36mm 38mm 40mm 42mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 104 55. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS D0AA6O Piping Class: BD, FL, FG Material Low Temperature Carbon Steel(NACE MR0175/ISO15156) NDT Refer to Specification of Piping Inspection D0AA6O ASME B16.5 Pressure Class 600 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 10210 10210 10020 9320 9020 Size 1/2”-3/4” 1”-1 1/2” - XXS Pipe THK A333 Gr. 3 SMLS, PE, ASME B36.10M, Material NACE MR0175/ISO15156 Fittings 2" XXS A350 LF3 CL2, CL 6000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 Sockolet 6”-8” 10”-18” SCH 160 SCH120 SCH100 A350 LF3 CL2, BW, MSS SP 97, NACE MR0175/ISO15156 - A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, NPT, ASME B16.11, Plug - NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange(Note11) (Note 7) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 B16.11, NACE MR0175/ISO15156 Cap SCH80 26”-36” Butt Weld Fittings: (Note1) A350 LF3 CL2, CL 6000, SW, ASME Coupling 20”-24” A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 - Weldolet ASME B31.3 3"-4" Forged Fittings: Elbow, Tee, Design code A350 LF3 CL2, CL 600, RF, ASME B16.48, NACE MR0175/ISO15156 A350 LF3 CL2, CL 600, SW-RF, ASME A350 LF3 CL2, B16.5, NACE MR0175/ISO15156 MR0175/ISO15156 (Note1) CL 600,WN-RF, ASME B16.5 , NACE ASTM A350 LF3 CL2, CL 600, RF, ASME B16.5 , NACE MR0175/ISO15156 Valves(Note11) API 602 CL 800 ASME B16.34 CL 600 BS9CXIQV / BS9CMIQV BD9CRRIQV / BD9CRFIQV - - Check Valve CS9CXPQV CD9CRWQV / CD9CRSQV Gate Valve GS9CXQV / GS9CMQV GD9CRQV Globe Valve LS9CXQV LD9CRQV NS9CXQV / NS9CMQV - Ball Valve Butterfly Valve Needle Valve 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156,CL 600, RF, Gasket ASME B16.20 Bolt/Nuts ASTM A320 Gr.L7M Stud Bolt / A194 Gr.7ML HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with white color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 32mm 34mm 36mm 38mm 40mm 42mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 105 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 56. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS D0SA0L Service To be specified Piping Class: Material Stainless Steel ASME B16.5 Pressure Class 600 Corrosion Allowance: 0mm NDT Refer to Specification of Piping Inspection D0SA0L Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 8270 8270 8000 6960 6280 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-4” 6"-8" 10"-24" 26”-36” Pipe THK SCH 80S SCH 40S SCH 80S SCH 80 (Note 7) A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr Material A312 TP316L SMLS, PE, ASME B36.19M Fittings 316L Class1, WELDED(≥16”), B36.19M.(Note 6) Forged Fittings: Elbow, Tee, A182 F316L, CL 3000, SW, ASME B16.11 Reducer Sockolet - Coupling A182 F316L, CL 3000, SW, ASME B16.11 Cap A182 F316L, CL 3000, NPT, ASME B16.11 Plug A182 F316L, NPT, ASME B16.11 Spectacle Blind, A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, BW, MSS-SP-97 A403 Gr. WP 316L, BW, ASME B16.9 - A182 F316L, CL 600, RF, ASME B16.48 Spacer & Blanks Flange(Note11) A182 F316L, CL 600,SW-RF, ASME B16.5 Blind Flange A182 F316L, CL 600, WN-RF, ASME B16.5 (Note1) A182 F316L, CL 600, RF, ASME B16.5 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 600 Ball Valve BS2CXZI / BS2CMZI, BD2CRRZI / BD2CRFZI Check Valve CS2CXPZ CD2CRWZ / CD2CRSZ Gate Valve GS2CXZ / GS2CMZ GD2CRZ Globe Valve LS2CXZ LD2CRZ Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 600, RF, ASME B16.20 ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 28mm 30mm 32mm 34mm 36mm 38mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 106 ASME Butt Weld Fittings: (Note1) A182 F316L, CL 3000, SW, MSS-SP-97 Weldolet BE, 57. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS D0SA0N Service To be specified Material Stainless Steel(NACE MR0175 /ISO15156) ASME B16.5 Pressure Class Radiography Refer to Specification of Piping Inspection Corrosion Allowance: Piping Class: D0SA0N(Note3) 600 0mm Design code Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 50 100 150 Design Pressure (kPaG) 8270 8270 8000 6960 6280 2"-4” 6"-8" 10"-24" 26”-36” SCH 40S SCH 80S SCH 80 (Note 7) Size 1/2"-1 1/2" Pipe THK SCH 80S A312 TP316L SMLS, PE, Material ASME B36.19M, NACE MR0175/ISO15156 Fittings ASME B31.3 A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, B36.19M.(Note 6), NACE MR0175/ISO15156 Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A182 F316L, CL 3000, SW, ASME B16.11, A403 Reducer NACE MR0175/ISO15156 MR0175/ISO15156 Gr. WP 316L, A182 F316L, CL 3000, SW, MSS-SP-97, NACE Sockolet Weldolet A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156 - A182 F316L, CL 3000, NPT, ASME B16.11, A403 NACE MR0175/ISO15156 MR0175/ISO15156 Gr. WP 316L, BW, ASME B16.9, NACE - MR0175/ISO15156 Spectacle Blind, NACE - A182 F316L, NPT, ASME B16.11, NACE Plug B16.9, - NACE MR0175/ISO15156 Cap ASME A182 F316L, CL 3000, SW, ASME B16.11, Coupling BW, - MR0175/ISO15156 Threadolet ASME A182 F316L, CL 600, RF, ASME B16.48, NACE MR0175/ISO15156 Spacer & Blanks Flange(Note11) Blind Flange A182 F316L, CL 600, SW-RF, ASME B16.5, A182 F316L, CL 600, WN-RF, ASME B16.5 (Note1), NACE NACE MR0175/ISO15156 MR0175/ISO15156 A182 F316L, CL 600, RF, ASME B16.5, NACE MR0175/ISO15156 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 600 Ball Valve BS2CXIV / BS2CMIV BD2CRRIV / BD2CRFIV Check Valve CS2CXPV CD2CRWV / CD2CRSV Gate Valve GS2CXV / GS2CMV GD2CRV Globe Valve LS2CXV LD2CRV Needle Valve NS2CXV / NS2CMV - 4.5mm thickness, “CGI” 316L S.S Spiral Wound Non-Asbestos filler Dope: Graphite & Oil Gasket with 316L S.S inner & outer ring, CL 600, RF, ASME B16.20 ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 28mm 30mm 32mm 34mm 36mm 38mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 107 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 58. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS D0SA0O Service To be specified Piping Class: D0SA0O(Note3) Material Stainless Steel(NACE MR0175 /ISO15156) ASME B16.5 Pressure Class 600 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 0mm Design code Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 8270 8270 8000 6960 6280 ASME B31.3 Size 1/2"-1 1/2" 2"-4” 6"-8" 10"-24" 26”-36” Pipe THK SCH 80S SCH 40S SCH 80S SCH 80 (Note 7) A312 TP316L SMLS, PE, Material ASME B36.19M, NACE MR0175/ISO15156 Fittings A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6), NACE MR0175/ISO15156 Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A182 F316L, CL 3000, SW, ASME B16.11, A403 Reducer NACE MR0175/ISO15156 MR0175/ISO15156 Gr. WP 316L, A182 F316L, CL 3000, SW, MSS-SP-97, NACE Sockolet - A182 F316L, CL 3000, NPT, ASME B16.11, A403 NACE MR0175/ISO15156 MR0175/ISO15156 Gr. WP 316L, A182 F316L, NPT, ASME B16.11, NACE Plug BW, ASME B16.9, A182 F316L, CL 600, RF, ASME B16.48, NACE MR0175/ISO15156 Spacer & Blanks Flange(Note11) Blind Flange A182 F316L, CL 600, SW-RF, ASME B16.5, A182 F316L, CL 600, WN-RF, ASME B16.5 (Note1), NACE NACE MR0175/ISO15156 MR0175/ISO15156 A182 F316L, CL 600, RF, ASME B16.5, NACE MR0175/ISO15156 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 600 Ball Valve BS2CXZIV / BS2CMZIV BD2CRRZIV / BD2CRFZIV Check Valve CS2CXPZV CD2CRWZV / CD2CRSZV Gate Valve GS2CXZV / GS2CMZV GD2CRZV Globe Valve LS2CXZV LD2CRZV Needle Valve NS2CXZV / NS2CMZV - 4.5mm thickness, “CGI” 316L S.S Spiral Wound Non-Asbestos filler Dope: Graphite & Oil Gasket with 316L S.S inner & outer ring, CL 600, RF, ASME B16.20 ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 28mm 30mm 32mm 34mm 36mm 38mm 108 NACE - MR0175/ISO15156 Spectacle Blind, NACE - NACE MR0175/ISO15156 Cap B16.9, A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156 A182 F316L, CL 3000, SW, ASME B16.11, Coupling ASME - MR0175/ISO15156 Weldolet BW, (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 59. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS D0SA0Z Service To be specified Piping Class: Material Stainless Steel ASME B16.5 Pressure Class Radiography Refer to Specification of Piping Inspection D0SA0Z 600 Corrosion Allowance: 0mm Design code Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 50 100 150 Design Pressure (kPaG) 8270 8270 8000 6960 6280 ASME B31.3 Size 1/2"-1 1/2" 2"-4” 6"-8" 10"-24" 26”-36” Pipe THK SCH 80S SCH 40S SCH 80S SCH 80 (Note 7) Material A312 TP316L SMLS, PE, A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L ASME B36.19M Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) Fittings Forged Fittings: Elbow, Tee, A182 F316L, CL 3000, SW, ASME B16.11 Reducer Sockolet Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL 3000, SW, MSS-SP-97 Weldolet - Coupling A182 F316L, CL 3000, SW, ASME B16.11 Cap A182 F316L, CL 3000, NPT, ASME B16.11 Plug A182 F316L,NPT, ASME B16.11 Spectacle Blind, A182 F316L, BW, MSS-SP-97 A403 Gr. WP 316L, BW, ASME B16.9 - A182 F316L, CL 600, RF, ASME B16.48 Spacer & Blanks Flange(Note11) A182 F316L, CL 600, SW-RF, ASME B16.5 Blind Flange A182 F316L, CL 600, WN-RF, ASME B16.5 (Note1) A182 F316L, CL 600, RF, ASME B16.5 (Note11) Valves(Note11) API 602 CL 800 ASME B16.34 CL 600 Ball Valve BS2CXI / BS2CMI BD2CRRI / BD2CRFI Check Valve CS2CXP CD2CRW / CD2CRS Gate Valve GS2CX / GS2CM GD2CR Globe Valve LS2CX LD2CR Needle Valve NS2CX / NS2CM - 4.5mm thickness, “CGI” 316L S.S Spiral Wound Non-Asbestos filler Dope: Graphite & Oil Gasket with 316 S.S inner & outer ring, CL 600, RF, ASME B16.20 ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 28mm 30mm 32mm 34mm 36mm 38mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 109 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 60. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS D0SI0N Service To be specified Material Duplex Stainless Steel (NACE MR0175/ISO15156) NDT Piping Class: Refer to Specification of Piping Inspection D0SI0N(Note3) ASME B16.5 Pressure Class 600 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -50 38 50 100 150 200 Design Pressure (kPaG) 10340 10340 10340 10130 9190 8530 Size 1/2"-1 1/2" 2"-8" 10" Pipe THK SCH 80S SCH 40S SCH 40S A790 UNS S31803 SMLS, PE, Material ASME B36.19M,NACE MR0175/ISO15156 Fittings A182 F51, CL 3000, SW, ASME Reducer B16.11,NACE MR0175/ISO15156 14”-16” 18"-24" SCH 80S XS SCH 40 26”-36” (Note 7) A790 UNS S31803 SMLS,BE, ASME A928 UNS S31803 WELDED , BE, ASME B36.19M,NACE B36.19M NACE MR0175/ISO15156 (Note6) MR0175/ISO15156 Forged Fittings: Elbow, Tee, 12" ASME B31.3 Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9,NACE MR0175/ISO15156 A182 F51, CL 3000, SW, Sockolet MSS-SP-97,NACE - MR0175/ISO15156 Weldolet Coupling Cap Plug Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange (Note11) Valves(Note11) Ball Valve - A182 F51, BW, MSS-SP-97,NACE MR0175/ISO15156 A182 F51, CL 3000, SW,ASME - B16.11,NACE MR0175/ISO15156 - A815 UNS S31803, BW, ASME B16.9,NACE MR0175/ISO15156 A182 F51, NPT,ASME - B16.11,NACE MR0175/ISO15156 A182 F51, CL 600, RF, ASME B16.48,NACE MR0175/ISO15156 A182 F51, CL 600, SW-RF,ASME A182 F51, CL 600, WN-RF, ASME B16.5, B16.5,NACE MR0175/ISO15156 NACE MR0175/ISO15156 (Note1) A182 F51, CL600, RF, ASME B16.5,NACE MR0175/ISO15156 API 602 CL 800 ASME B16.34 CL 600 BS8EXIV/ BS8EMIV BD8ERRIV/ BD8ERFIV Butterfly Valve - - Check Valve CS8EXPV CD8ERWV/CD8ERSV Gate Valve GS8EMV/ GS8EXV GD8ERV Globe Valve LS8EXV LD8ERV NS8EXV / NS8EMV - Needle Valve Gasket Bolt/Nuts 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156, CL 600, RF, ASME B16.20 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 110 (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 22mm 22mm 22mm 24mm 26mm 28mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 61. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS D0SI0Z Service To be specified Material Duplex Stainless Steel NDT Piping Class: Refer to Specification of Piping Inspection D0SI0Z ASME B16.5 Pressure Class 600 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -50 38 50 100 150 200 Design Pressure (kPaG) 10340 10340 10340 10130 9190 8530 Size 1/2"-1 1/2" 2"-8" Pipe THK SCH 80S SCH 40S A790 UNS S31803 SMLS, PE, Material ASME B36.19M Fittings A790 UNS S31803 SMLS, BE, ASME B36.19M Forged Fittings: Elbow, Tee, A182 F51, CL 3000, SW, Reducer ASME B16.11 10" 12" SCH 40S SCH 80S - (Note 7) A815 UNS S31803, BW, ASME B16.9 A182 F51, BW, MSS-SP-97 - B16.11 Cap - Plug A182 F51, NPT,ASME B16.11 Spectacle Blind, 26”-36” SCH 40 Butt Weld Fittings: (Note1) A182 F51, CL 3000, SW,ASME Coupling 18"-24" XS B36.19M(Note6) MSS-SP-97 Weldolet 14”-16” A928 UNS S31803 WELDED , BE, ASME A182 F51, CL 3000, SW, Sockolet ASME B31.3 A815 UNS S31803, BW, ASME B16.9 - A182 F51, CL 600, RF, ASME B16.48 Spacer & Blanks A182 Flange(Note11) F51, CL 600, SW-RF,ASME B16.5 Blind Flange A182 (Note11) A182 F51, CL600, WN-RF, ASME B16.5 (Note1) F51, CL 600, RF, ASME B16.5 Valves(Note11) API 602 CL 800 ASME B16.34 CL 600 Ball Valve BS8EXI / BS8EMI BD8ERRI / BD8ERFI Butterfly Valve - - Check Valve CS8EXP CD8ERW / CD8ERS Gate Valve GS8EM / GS8EX GD8ER Globe Valve LS8EX LD8ER Needle Valve NS8EX / NS8EM - Gasket 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 600, RF, ASME B16.20 ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 22mm 22mm 22mm 24mm 26mm 28mm 111 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 62. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS D0SK0N Service To be specified Material Duplex Stainless Steel (NACE MR0175/ISO15156) NDT Piping Class: Refer to Specification of Piping Inspection D0SK0N(Note3) ASME B16.5 Pressure Class 600 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -50 38 50 100 150 200 Design Pressure (kPaG) 10340 10340 10340 10130 9190 8530 Size 1/2"-1 1/2" Pipe THK SCH 80S ASME B31.3 2"-8" 10"-16" 18"-20" 24" 26”-36” SCH 40S SCH 40S XS SCH 40 (Note 7) A790 UNS S32750 Material A790 UNS S32750 SMLS, PE, ASME SMLS,BE, ASME A928 UNS S32750 WELDED , BE, ASME B36.19M B36.19M,NACE MR0175/ISO15156 NACE MR0175/ISO15156 (Note6) B36.19M,NACE MR0175/ISO15156 Fittings Forged Fittings: Elbow, Tee, A182 F53, CL 3000, SW, ASME Reducer B16.11,NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9,NACE MR0175/ISO15156 A182 F53, CL 3000, SW, Sockolet MSS-SP-97,NACE - MR0175/ISO15156 Weldolet Coupling - Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange (Note11) - B16.11,NACE MR0175/ISO15156 Cap Plug A182 F53, BW, MSS-SP-97,NACE MR0175/ISO15156 A182 F53, CL 3000, SW,ASME - A815 UNS S32750, BW, ASME B16.9,NACE MR0175/ISO15156 A182 F53, NPT,ASME B16.11,NACE - MR0175/ISO15156 A182 F53, CL 600, RF, ASME B16.48,NACE MR0175/ISO15156 A182 F53, CL 600, SW-RF,ASME A182 F53, CL 600, WN-RF, ASME B16.5, B16.5,NACE MR0175/ISO15156 NACE MR0175/ISO15156 (Note1) A182 F53, CL600, RF, ASME B16.5,NACE MR0175/ISO15156 Valves(Note11) Ball Valve API 602 CL 800 ASME B16.34 CL 600 BS10PXIV/ BS10PMIV BD10PRRIV/ BD10PRFIV Butterfly Valve - - Check Valve CS10PXPV CD10PRWV/CD10PRSV Gate Valve GS10PMV/ GS10PXV GD10PRV Globe Valve LS10PXV LD10PRV Needle Valve NS10PXV / NS10PMV - Gasket Bolt/Nuts 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, NACE MR0175/ISO15156, CL 600, RF, ASME B16.20 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. 112 (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 32” 34” 36” 18 18m 18m 20m 20m 22m (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 63. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS D0SK0Z Service To be specified Material Duplex Stainless Steel NDT Piping Class: D0SK0Z ASME B16.5 Pressure Class Refer to Specification of Piping Inspection Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -50 38 50 100 150 200 Design Pressure (kPaG) 10340 10340 10340 10130 9190 8530 Size 1/2"-1 1/2" Pipe THK SCH 80S Material A790 UNS S32750 SMLS, PE, ASME B36.19M Fittings A182 F53, CL 3000, SW, ASME B16.11 Sockolet Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange (Note11) Valves(Note11) Ball Valve 24" 26”-36” SCH 40S SCH 40S XS SCH 40 (Note 7) A790 UNS S32750 SMLS, BE, ASME A928 UNS S32750 WELDED , BE, ASME B36.19M(Note6) Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9 - MSS-SP-97 - A182 F53, BW, MSS-SP-97 A182 F53, CL 3000, SW,ASME - B16.11 Cap Plug 18"-20" A182 F53, CL 3000, SW, Weldolet Coupling 10"-16" Forged Fittings: Reducer - A815 UNS S32750, BW, ASME B16.9 A182 F53, NPT,ASME B16.11 - A182 F53, CL 600, RF, ASME B16.48 A182 F53, CL 600, SW-RF,ASME B16.5 A182 A182 F53, CL600, WN-RF, ASME B16.5 (Note1) F53, CL 600, RF, ASME B16.5 API 602 CL 800 ASME B16.34 CL 600 BS10PXI / BS10PMI BD10PRRI / BD10PRFI Butterfly Valve - - Check Valve CS10PXP CD10PRW / CD10PRS Gate Valve GS10PM / GS10PX GD10PR Globe Valve LS10PX LD10PR NS10PX / NS10PM - Needle Valve Gasket Bolt/Nuts ASME B31.3 2"-8" B36.19M Elbow, Tee, 600 4.5mm thickness, spiral wound gasket with 316L S.S inner&outer ring, CL 600, RF, ASME B16.20 ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 113 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 26” 28” 30” 32” 34” 36” 18mm 18mm 18mm 20mm 20mm 22mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 64. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E0CA3N Service To be specified Piping Class: E0CA3N Material Carbon Steel(NACE MR0175 /ISO15156) ASME B16.5 Pressure Class 900 Radiography Refer to Specification of Piping Inspection Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 15320 15040 13980 13520 Size 1/2"-1 1/2" 2"-4" 6"-24" 26"-30" XXS SCH 160 SCH 120 Note7 Pipe THK Material ASME B31.3 A106 Gr. B SMLS, BE, ASME B36.10M,NACE MR0175/ISO15156 Fittings Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A105, CL 9000, SW, ASME B16.11, NACE A234 Gr. WPB, SW, ASME B16.9, Reducer MR0175/ISO15156 NACE MR0175/ISO15156 Sockolet - - A105, BW, MSS-SP-97, A105, BW, MSS-SP-97, NACE MR0175/ISO15156(Note1) NACE MR0175/ISO15156 Weldolet Coupling Cap Plug Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange(Note11) A105,CL9000, SW, ASME B16.11,NACE MR0175/ISO15156 - A105, CL 6000, NPT, ASME B16.11,NACE A234 Gr. WPB, BW, ASME B16.9, MR0175/ISO15156 MR0175/ISO15156 A105, NPT,ASME B16.11,NACE MR0175/ISO15156 - A105, CL 900, RTJ, ASME B16.48,NACE MR0175/ISO15156 A105, CL 900, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 (Note1) A105, CL 900, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF1CXIV / BF1CMIV BE1CJRIV / BE1CJFIV Check Valve CF1CXPV CE1CJWV / CE1CJSV Gate Valve GF1CXV / GF1CMV GE1CJV Globe Valve LF1CXV LE1CJV Needle Valve NF1CXV / NF1CMV - Gasket 316L Octagonal Ring, CL 900, ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, Sherardizing coating Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 114 NACE (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 44mm 47mm 50mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 65. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1CA3N Service To be specified Piping Class: E1CA3N Material Carbon Steel(NACE MR0175 /ISO15156) ASME B16.5 Pressure Class 900 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) 38 150 Design Pressure (kPaG) 12700 12700 Size 1/2"-1 1/2" 2"-3" 4"-6" 8"-24" 26"-30" XXS SCH 160 SCH 120 SCH 100 Note7 Pipe THK Material ASME B31.3 A106 Gr. B SMLS, BE, ASME B36.10M,NACE MR0175/ISO15156 Fittings Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A105, CL 9000, SW, ASME B16.11, NACE A234 Gr. WPB, SW, ASME B16.9, Reducer MR0175/ISO15156 NACE MR0175/ISO15156 Sockolet - - A105, BW, MSS-SP-97, A105, BW, MSS-SP-97, NACE MR0175/ISO15156(Note1) NACE MR0175/ISO15156 Weldolet Coupling Cap Plug Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange(Note11) A105, CL9000, SW, ASME B16.11,NACE - MR0175/ISO15156 - A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156 A105,NPT,ASMEB16.11,NACE - MR0175/ISO15156 A105, CL 900, RTJ, ASME B16.48,NACE MR0175/ISO15156 A105, CL 900, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 (Note1) A105, CL 900, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF1CXIV / BF1CMIV BE1CJRIV / BE1CJFIV Check Valve CF1CXPV CE1CJWV / CE1CJSV Gate Valve GF1CXV / GF1CMV GE1CJV Globe Valve LF1CXV LE1CJV Needle Valve NF1CXV / NF1CMV - Gasket 316L Octagonal Ring, CL 900, NACE MR0175/ISO15156,ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, Sherardizing coating Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 115 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 37mm 40mm 43mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 66. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E0CA6N Service To be specified Piping Class: E0CA6N Material Carbon Steel(NACE MR0175 /ISO15156) ASME B16.5 Pressure Class 900 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 15320 15040 13980 13520 Size Pipe THK Material Design code ASME B31.3 1/2"-3/4" 1"-1 1/2" 2"-4" 6” 8"-16" - XXS XXS SCH160 18"-24" 26"-30" SCH 140 SCH 120 Note7 A106 Gr. B SMLS, BE, ASME B36.10M,NACE MR0175/ISO15156 Fittings Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A105, CL 9000, SW, ASME B16.11, A234 Gr. WPB, SW, ASME B16.9, Reducer NACE MR0175/ISO15156 NACE MR0175/ISO15156 Sockolet - - A105, BW, MSS-SP-97, A105, BW, MSS-SP-97, NACE MR0175/ISO15156(Note1) NACE MR0175/ISO15156 Weldolet Coupling Cap Plug Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange(Note11) A105, CL 9000,SW, ASME B16.11,NACE MR0175/ISO15156 - A105, CL 6000, NPT, ASME B16.11,NACE A234 Gr. WPB, BW, ASME B16.9, MR0175/ISO15156 MR0175/ISO15156 A105, NPT,ASME B16.11,NACE MR0175/ISO15156 - A105, CL 900, RTJ, ASME B16.48,NACE MR0175/ISO15156 A105, CL 900, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 (Note1) A105, CL 900, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF1CXIQV / BF1CMIQV BE1CJRIQV / BE1CJFIQV Check Valve CF1CXPQV CE1CJWQV / CE1CJSQV Gate Valve GF1CXQV / GF1CMQV GE1CJQV Globe Valve LF1CXQV LE1CJQV Needle Valve NF1CXQV / NF1CMQV - Gasket 316L Octagonal Ring, CL 900, NACE MR0175/ISO15156 ,ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, Sherardizing coating Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. 116 NACE (3) All materials shall comply with NACE MR0175/ISO15156. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 47mm 51mm 54mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 67. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1CA6N Service To be specified Piping Class: E1CA6N Material Carbon Steel(NACE MR0175 /ISO15156) ASME B16.5 Pressure Class 900 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 12700 12700 Size Pipe THK Material ASME B31.3 1/2"-3/4" 1"-1 1/2" 2"-3" - XXS XXS 4"-6” 8"-20" SCH160 SCH 120 24" 26"-30" SCH 100 Note7 A106 Gr. B SMLS, BE, ASME B36.10M,NACE MR0175/ISO15156 Fittings Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A105, CL 9000, SW, ASME B16.11, A234 Gr. WPB, SW, ASME B16.9, Reducer NACE MR0175/ISO15156 NACE MR0175/ISO15156 Sockolet - - A105, BW, MSS-SP-97, A105, BW, MSS-SP-97, NACE MR0175/ISO15156(Note1) NACE MR0175/ISO15156 Weldolet Coupling Cap Plug Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange(Note11) Design code A105, CL9000, SW, ASME - B16.11,NACE MR0175/ISO15156 A105, A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156 NPT,ASME B16.11,NACE - MR0175/ISO15156 A105, CL 900, RTJ, ASME B16.48,NACE MR0175/ISO15156 A105, CL 900, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 (Note1) A105, CL 900, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF1CXIQV / BF1CMIQV BE1CJRIQV / BE1CJFIQV Check Valve CF1CXPQV CE1CJWQV / CE1CJSQV Gate Valve GF1CXQV / GF1CMQV GE1CJQV Globe Valve LF1CXQV LE1CJQV Needle Valve NF1CXQV / NF1CMQV - Gasket 316L Octagonal Ring, CL 900, NACE MR0175/ISO15156,ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, Sherardizing coating Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 117 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 41mm 43mm 46mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 68. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E0CA3Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class 900 Corrosion Allowance: 3mm NDT Refer to Specification of Piping Inspection E0CA3Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 15320 15040 13980 13520 Size 1/2"-1 1/2" 2"-4" 6"-24" 26"-30" XXS SCH 160 SCH 120 Note7 ASME B31.3 Pipe THK Material A106 Gr. B SMLS, PE,ASME B36.10M Fittings Elbow, Tee, Reducer Forged Fittings: A105, CL 9000, SW, ASME B16.11 Sockolet - Weldolet A105, BW, MSS-SP-97(Note1) Coupling A105, CL 9000, SW, ASME B16.11 Cap - Plug A105, NPT, ASME B16.11 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange(Note11) Valves(Note11) A106 Gr. B SMLS, BE, ASME B36.10M Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 A105, BW, MSS-SP-97 A234 Gr. WPB, BW, ASME B16.9 - A105, CL 900, RTJ, ASME B16.48 A105, CL 900, SW-RTJ, ASME B16.5 A105, CL 900, WN-RTJ, ASME B16.5 (Note1) A105, CL 900, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF1CXI / BF1CMI BE1CJRI / BE1CJFI Check Valve CF1CXP CE1CJW / CE1CJS Gate Valve GF1CX / GF1CM GE1CJ Globe Valve LF1CX LE1CJ Needle Valve NF1CX / NF1CM - Gasket 316L Octagonal Ring, CL 900, ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts with Sherardizing coatings Note: (1) Wall thickness of fitting and flange shall match pipe thickness. 118 (2) NPT connection could only be used for connection with instrument. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 44mm 47mm 50mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 69. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1CA3Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class 900 Corrosion Allowance: 3mm NDT Refer to Specification of Piping Inspection E1CA3Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) 38 150 Design Pressure (kPaG) 12700 12700 Size 1/2"-1 1/2" 2"-3" 4"-6" 8"-24" 26"-30" XXS SCH 160 SCH 120 SCH 100 Note7 ASME B31.3 Pipe THK Material A106 Gr. B SMLS, PE,ASME B36.10M Fittings Elbow, Tee, Reducer Forged Fittings: A105, CL 9000, SW, ASME B16.11 Sockolet - Weldolet A105, BW, MSS-SP-97(Note1) Coupling A105, CL 9000, SW, ASME B16.11 Cap - Plug A105, NPT, ASME B16.11 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange(Note11) Valves(Note11) A106 Gr. B SMLS, BE, ASME B36.10M Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 A105, BW, MSS-SP-97 A234 Gr. WPB, BW, ASME B16.9 - A105, CL 900, RTJ, ASME B16.48 A105, CL 900, SW-RTJ, ASME B16.5 A105, CL 900, WN-RTJ, ASME B16.5 (Note1) A105, CL 900, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF1CXI / BF1CMI BE1CJRI / BE1CJFI Check Valve CF1CXP CE1CJW / CE1CJS Gate Valve GF1CX / GF1CM GE1CJ Globe Valve LF1CX LE1CJ Needle Valve NF1CX / NF1CM - Gasket 316L Octagonal Ring, CL 900, ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts with Sherardizing coatings Note: (1) Wall thickness of fitting and flange shall match pipe thickness. 119 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 (2) NPT connection could only be used for connection with instrument. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 37mm 40mm 43mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 70. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E0CA6Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class 900 Corrosion Allowance: 6mm NDT Refer to Specification of Piping Inspection E0CA6Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 15320 15040 13980 13520 Design code ASME B31.3 Size Pipe THK 1/2"-3/4" 1"-1 1/2" 2"-4" 6” 8"-16" 18"-24" 26"-30" - XXS XXS SCH160 SCH 140 SCH 120 Note7 Material A106 Gr. B SMLS, PE,ASME B36.10M Fittings Forged Fittings: Elbow, Tee, Reducer Sockolet A105, CL 9000, SW, ASME B16.11 A105, BW, MSS-SP-97(Note1) Coupling A105, CL 9000, SW, ASME B16.11 Plug Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange(Note11) Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 - Weldolet Cap A106 Gr. B SMLS, BE, ASME B36.10M - A105, BW, MSS-SP-97 A234 Gr. WPB, BW, ASME B16.9 A105, NPT, ASME B16.11 - A105, CL 900, RTJ, ASME B16.48 A105, CL 900, SW-RTJ, ASME B16.5 A105, CL 900, WN-RTJ, ASME B16.5 (Note1) A105, CL 900, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF1CXIQ / BF1CMIQ BE1CJRIQ / BE1CJFIQ Check Valve CF1CXPQ CE1CJWQ / CE1CJSQ Gate Valve GF1CXQ / GF1CMQ GE1CJQ Globe Valve LF1CXQ LE1CJQ Needle Valve NF1CXQ / NF1CMQ - Gasket 316L Octagonal Ring, CL 900, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts with Sherardizing coatings Note: 120 (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 47mm 51mm 54mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 71. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1CA6Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class 900 Corrosion Allowance: 6mm NDT Refer to Specification of Piping Inspection E1CA6Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 12700 12700 Design code ASME B31.3 Size Pipe THK 1/2"-3/4" 1"-1 1/2" 2"-3" - XXS XXS Material A106 Gr. B SMLS, PE,ASME B36.10M Fittings Forged Fittings: Elbow, Tee, Reducer A105, CL 9000, SW, ASME B16.11 Sockolet - Weldolet A105, BW, MSS-SP-97(Note1) Coupling A105, CL 9000, SW, ASME B16.11 Cap - Plug A105,NPT, ASME B16.11 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange(Note11) 4"-6” 8"-20" 24" SCH160 SCH 120 SCH 100 26"-30" Note7 A106 Gr. B SMLS, BE, ASME B36.10M Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 A105, BW, MSS-SP-97 A234 Gr. WPB, BW, ASME B16.9 - A105, CL 900, RTJ, ASME B16.48 A105, CL 900, SW-RTJ, ASME B16.5 A105, CL 900, WN-RTJ, ASME B16.5 (Note1) A105, CL 900, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF1CXIQ / BF1CMIQ BE1CJRIQ / BE1CJFIQ Check Valve CF1CXPQ CE1CJWQ / CE1CJSQ Gate Valve GF1CXQ / GF1CMQ GE1CJQ Globe Valve LF1CXQ LE1CJQ Needle Valve NF1CXQ / NF1CMQ - Gasket 316L Octagonal Ring, CL 900, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts with Sherardizing coatings 121 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 41mm 43mm 46mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 72. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E0CF3N Service To be specified Material High Strength Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection E0CF3N(Note3) ASME B16.5 Pressure Class 900 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 15320 15040 13980 13520 Size Pipe THK Design code ASME B31.3 1/2”-11/2” 2"-4" 6”-24” 26"-30" XXS SCH160 SCH120 Note7 API 5L X65 PSL2 SMLS, BE, Material ASME B36.10M NACE MR0175 API 5L X65 PSL2 SMLS, BE, ASME B36.10M NACE MR0175 /ISO15156 /ISO15156 Fittings Butt Weld Fittings: (Note1) Elbow, Tee, A860 WPHY 65, BW, ASME B16.9 Reducer NACE MR0175 /ISO15156 Weldolet Cap Spectacle Blind, Spacer & Blanks A860 WPHY 65, BW, MSS-SP-97 NACE MR0175 /ISO15156 A860 WPHY 65, BW, ASME B16.9 NACE MR0175 /ISO15156 A860 WPHY 65, BW, ASME B16.9 NACE MR0175 /ISO15156 A860 WPHY 65, BW, MSS-SP-97 NACE MR0175 /ISO15156 A860 WPHY 65, BW, ASME B16.9 NACE MR0175 /ISO15156 A694 F65, CL 900, RTJ, ASME B16.48, NACE MR0175 /ISO15156 Flange(Note11) A694 F65, CL 900 WN-RTJ, NACE MR0175 /ISO15156 ASME B16.5 (Note1) Blind Flange(Note11) Valves(Note11) Ball Valve A694 F65, CL 900, RTJ, NACE MR0175 /ISO15156 ASME B16.5 ASME B16.34 CL 1500 BF1CJRIV / BF1CWRIV/BF1CBRIV ASME B16.34 CL 900 BE1CJRIV / BE1CJFIV Butterfly Valve - - Check Valve CF1CJPV / CF1CWPV CE1CJWV / CE1CJSV Gate Valve GF1CJV / GF1CBV/GF1CWV GE1CJV Globe Valve LF1CJV/LF1CWV LE1CJV Needle Valve NF1CBV / NF1CWV - Gasket 316L Octagonal Ring, CL 900, NACE MR0175/ISO15156,ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. 122 (3)All materials shall comply with NACE MR0175/ISO15156. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 35mm 38mm 40mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 73. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1CF3N Service To be specified Material High Strength Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection E1CF3N(Note 3) ASME B16.5 Pressure Class 900 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 12700 12700 Size Pipe THK Design code ASME B31.3 1/2”-11/2” 2"-3" 4”-6” 8”-24” 26"-30" XXS SCH160 SCH120 SCH100 Note7 API 5L X65 PSL2 SMLS, BE, Material ASME B36.10M NACE MR0175 API 5L X65 PSL2 SMLS, BE, ASME B36.10M NACE MR0175 /ISO15156 /ISO15156 Fittings Butt Weld Fittings: (Note1) Elbow, Tee, A860 WPHY 65, BW, ASME B16.9 Reducer NACE MR0175 /ISO15156 Weldolet Cap Spectacle Blind, Spacer & Blanks A860 WPHY 65, BW, MSS-SP-97 NACE MR0175 /ISO15156 A860 WPHY 65, BW, ASME B16.9 NACE MR0175 /ISO15156 Flange(Note11) Valves(Note11) Ball Valve A860 WPHY 65, BW, MSS-SP-97 NACE MR0175 /ISO15156 A860 WPHY 65, BW, ASME B16.9 NACE MR0175 /ISO15156 A694 F65, CL 900, RTJ, ASME B16.48, NACE MR0175 /ISO15156 Flange(Note11) A694 F65, CL 900 Blind A860 WPHY 65, BW, ASME B16.9 NACE MR0175 /ISO15156 WN-RTJ, NACE MR0175 /ISO15156 ASME B16.5 (Note1) A694 F65, CL 900, RTJ, NACE MR0175 /ISO15156 ASME B16.5 ASME B16.34 CL 1500 BF1CJRIV / BF1CWRIV/BF1CBRIV ASME B16.34 CL 900 BE1CJRIV / BE1CJFIV Butterfly Valve - - Check Valve CF1CJPV / CF1CWPV CE1CJWV / CE1CJSV Gate Valve GF1CJV/ GF1CBV/GF1CWV GE1CJV Globe Valve LF1CJV/LF1CWV LE1CJV Needle Valve NF1CBV / NF1CWV - Gasket 316L Octagonal Ring, CL 900, NACE MR0175/ISO15156,ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3)All materials shall comply with NACE MR0175/ISO15156. 123 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 30mm 32mm 34mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 74. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E0CF6N Service To be specified Material High Strength Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection E0CF6N(Note 3) ASME B16.5 Pressure Class 900 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 15320 15040 13980 13520 Size 1/2” 3/4” 1”-1 1/2” 2”-6” 8”-14” 16”24” 26"-30" Pipe THK - - XXS XXS SCH140 SCH120 Note7 ASME B31.3 API 5L X65 PSL2 SMLS, BE, Material ASME B36.10M NACE MR0175 API 5L X65 PSL2 SMLS, BE, ASME B36.10M NACE MR0175 /ISO15156 /ISO15156 Fittings Butt Weld Fittings: (Note1) Elbow, Tee, A860 WPHY 65, BW, ASME B16.9 Reducer NACE MR0175 /ISO15156 Weldolet Cap Spectacle Blind, Spacer & Blanks A860 WPHY 65, BW, MSS-SP-97 NACE MR0175 /ISO15156 A860 WPHY 65, BW, ASME B16.9 NACE MR0175 /ISO15156 Flange(Note11) Valves(Note11) Ball Valve A860 WPHY 65, BW, MSS-SP-97 NACE MR0175 /ISO15156 A860 WPHY 65, BW, ASME B16.9 NACE MR0175 /ISO15156 A694 F65, CL 900, RTJ, ASME B16.48, NACE MR0175 /ISO15156 Flange(Note11) A694 F65, CL 900 Blind A860 WPHY 65, BW, ASME B16.9 NACE MR0175 /ISO15156 WN-RTJ, NACE MR0175 /ISO15156 ASME B16.5 (Note1) A694 F65, CL 900, RTJ, NACE MR0175 /ISO15156 ASME B16.5 ASME B16.34 CL 1500 BF1CJRIQV / BF1CWRIQV/BF1CBRIQV ASME B16.34 CL 900 BE1CJRIQV / BE1CJFIQV Butterfly Valve - - Check Valve CF1CJPQV / CF1CWPQV CE1CJWQV / CE1CJSQV Gate Valve GF1CJQV/ GF1CBQV/GF1CWQV GE1CJQV Globe Valve LF1CJQV/LF1CWQV LE1CJQV Needle Valve NF1CBQV / NF1CWQV - Gasket 316L Octagonal Ring, CL 900, NACE MR0175/ISO15156,ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3)All materials shall comply with NACE MR0175/ISO15156. 124 (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 39mm 41mm 44mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 75. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1CF6N Service To be specified Material High Strength Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection E1CF6N(Note 3) ASME B16.5 Pressure Class 900 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 12700 12700 Size 1/2” 3/4” 1”-1 1/2” 2”-3” 4”-6” Pipe THK - - XXS XXS SCH160 Design code ASME B31.3 16”-24” 26"-30" SCH120 SCH100 Note7 8”-14” API 5L X65 PSL2 SMLS, BE, Material ASME B36.10M NACE MR0175 API 5L X65 PSL2 SMLS, BE, ASME B36.10M NACE MR0175 /ISO15156 /ISO15156 Fittings Butt Weld Fittings: (Note1) Elbow, Tee, A860 WPHY 65, BW, ASME B16.9 Reducer NACE MR0175 /ISO15156 Weldolet Cap Spectacle Blind, Spacer & Blanks A860 WPHY 65, BW, MSS-SP-97 NACE MR0175 /ISO15156 A860 WPHY 65, BW, ASME B16.9 NACE MR0175 /ISO15156 Flange(Note11) Valves(Note11) Ball Valve A860 WPHY 65, BW, MSS-SP-97 NACE MR0175 /ISO15156 A860 WPHY 65, BW, ASME B16.9 NACE MR0175 /ISO15156 A694 F65, CL 900, RTJ, ASME B16.48, NACE MR0175 /ISO15156 Flange(Note11) A694 F65, CL 900 Blind A860 WPHY 65, BW, ASME B16.9 NACE MR0175 /ISO15156 WN-RTJ, NACE MR0175 /ISO15156 ASME B16.5 (Note1) A694 F65, CL 900, RTJ, NACE MR0175 /ISO15156 ASME B16.5 ASME B16.34 CL 1500 BF1CJRIQV/ BF1CWRIQV/BF1CBRIQV ASME B16.34 CL 900 BE1CJRIQV / BE1CJFIQV Butterfly Valve - - Check Valve CF1CJPQV / CF1CWPQV CE1CJWQV / CE1CJSQV Gate Valve GF1CJQV/ GF1CBQV/GF1CWQV GE1CJQV Globe Valve LF1CJQV/LF1CWQV LE1CJQV Needle Valve NF1CBQV / NF1CWQV - Gasket 316L Octagonal Ring, CL 900, NACE MR0175/ISO15156 ,ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3)All materials shall comply with NACE MR0175/ISO15156. 125 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 34mm 36mm 38mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 76. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E0CF3Z Service To be specified Material High Strength Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection E0CF3Z ASME B16.5 Pressure Class 900 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 15320 15040 13980 13520 Size Pipe THK ASME B31.3 1/2”-11/2” 2"-4" 6”-24” 26"-30" XXS SCH160 SCH120 Note7 API 5L X65 PSL2 SMLS, BE, Material Design code ASME B36.10M API 5L X65 PSL2 SMLS, BE, ASME B36.10M Fittings Butt Weld Fittings: (Note1) Elbow, Tee, A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 Reducer Weldolet A860 WPHY 65, BW, MSS-SP-97 Cap A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A694 F65, CL 900, RTJ, ASME B16.48 Flange(Note11) A694 F65, CL 900 Blind Flange(Note11) A860 WPHY 65, BW, MSS-SP-97 WN-RTJ, ASME B16.5 (Note1) A694 F65, CL 900, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 BF1CJRI / BF1CWRI/BF1CBRI BE1CJRI / BE1CJFI Butterfly Valve - - Check Valve CF1CJP / CF1CWP CE1CJW / CE1CJS Gate Valve GF1CJ / GF1CB/GF1CW GE1CJ Globe Valve LF1CJ/LF1CW LE1CJ Needle Valve NF1CB / NF1CW - Ball Valve Gasket 316L Octagonal Ring, CL 900, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 35mm 38mm 40mm 126 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 77. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1CF3Z Service To be specified Material High Strength Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection E1CF3Z ASME B16.5 Pressure Class 900 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 12700 12700 Size Pipe THK ASME B31.3 1/2”-1 1/2” 2"-3" 4”-6” 8”-24” 26"-30" XXS SCH160 SCH120 SCH100 Note7 API 5L X65 PSL2 SMLS, BE, Material Design code ASME B36.10M API 5L X65 PSL2 SMLS, BE, ASME B36.10M Fittings Butt Weld Fittings: (Note1) Elbow, Tee, A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 Reducer Weldolet A860 WPHY 65, BW, MSS-SP-97 Cap A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A694 F65, CL 900, RTJ, ASME B16.48 Flange(Note11) A694 F65, CL 900 Blind Flange(Note11) A860 WPHY 65, BW, MSS-SP-97 WN-RTJ, ASME B16.5 (Note1) A694 F65, CL 900, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 BF1CJRI / BF1CWRI/BF1CBRI BE1CJRI / BE1CJFI Butterfly Valve - - Check Valve CF1CJP / CF1CWP CE1CJW / CE1CJS Gate Valve GF1CJ / GF1CB/GF1CW GE1CJ Globe Valve LF1CJ/LF1CW LE1CJ Needle Valve NF1CB / NF1CW - Ball Valve Gasket 316L Octagonal Ring, CL 900, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 30mm 32mm 34mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 127 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 78. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E0CF6Z Service To be specified Material High Strength Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection E0CF6Z ASME B16.5 Pressure Class 900 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 15320 15040 13980 13520 Size 1/2” 3/4” 1”-1 1/2” 2"-6" 8”-14” 16”24” 26"-30" Pipe THK - - XXS XXS SCH140 SCH120 Note7 API 5L X65 PSL2 SMLS, BE, Material ASME B36.10M ASME B31.3 API 5L X65 PSL2 SMLS, BE, ASME B36.10M Fittings Butt Weld Fittings: (Note1) Elbow, Tee, A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 Reducer Weldolet A860 WPHY 65, BW, MSS-SP-97 Cap A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A694 F65, CL 900, RTJ, ASME B16.48 Flange(Note11) A694 F65, CL 900 Blind Flange(Note11) A860 WPHY 65, BW, MSS-SP-97 WN-RTJ, ASME B16.5 (Note1) A694 F65, CL 900, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 BF1CJRIQ/ Ball Valve BF1CWRIQ/BF1CBRIQ ASME B16.34 CL 900 BE1CJRIQ / BE1CJFIQ Butterfly Valve - - Check Valve CF1CJPQ / CF1CWPQ CE1CJWQ / CE1CJSQ Gate Valve GF1CJQ / GF1CBQ/GF1CWQ GE1CJQ Globe Valve LF1CJQ/LF1CWQ LE1CJQ Needle Valve NF1CBQ / NF1CWQ - Gasket 316L Octagonal Ring, CL 900, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 39mm 41mm 44mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 128 79. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1CF6Z Service To be specified Material High Strength Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection E1CF6Z ASME B16.5 Pressure Class 900 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 12700 12700 Size 1/2” 3/4” 1”-1 1/2” 2"-3" 4”-6” Pipe THK - - XXS XXS SCH160 API 5L X65 PSL2 SMLS, BE, Material ASME B36.10M Design code ASME B31.3 16”-24” 26"-30" SCH120 SCH100 Note7 8”-14” API 5L X65 PSL2 SMLS, BE, ASME B36.10M Fittings Butt Weld Fittings: (Note1) Elbow, Tee, A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 Reducer Weldolet A860 WPHY 65, BW, MSS-SP-97 Cap A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A694 F65, CL 900, RTJ, ASME B16.48 Flange(Note11) A694 F65, CL 900 Blind Flange(Note11) A860 WPHY 65, BW, MSS-SP-97 WN-RTJ, ASME B16.5 (Note1) A694 F65, CL 900, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 BF1CJRIQ / Ball Valve BF1CWRIQ/BF1CBRIQ ASME B16.34 CL 900 BE1CJRIQ / BE1CJFIQ Check Valve CF1CJPQ / CF1CWPQ CE1CJWQ / CE1CJSQ Gate Valve GF1CJQ / GF1CBQ/GF1CWQ GE1CJQ Globe Valve LF1CJQ/LF1CWQ LE1CJQ Needle Valve NF1CBQ / NF1CWQ - Gasket 316L Octagonal Ring, CL 900, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 34mm 36mm 38mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 129 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 80. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E0AA3L Service To be specified Material Low Temperature Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection E0AA3L ASME B16.5 Pressure Class 900 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 15320 15320 15040 13980 13520 Size 1/2”-1 1/2” Pipe THK SCH 160 Material A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings Elbow, Tee, Reducer Weldolet - Coupling A350 LF3 CL2, CL 6000, SW, ASME B16.11 Cap - Plug A350 LF3 CL2,NPT, ASME B16.11 Flange(Note11) Blind Flange(Note11) Valves(Note11) 26"-30" SCH 160 SCH 120 Note7 A333 Gr. 3 SMLS, BE, ASME B36.10M Butt Weld Fittings: (Note1) A350 LF3 CL2, CL 6000, SW, ASME B16.11 A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, CL 6000, SW, MSS SP 97 Spacer & Blanks ASME B31.3 4”-24” 2”-3” Forged Fittings: Sockolet Spectacle Blind, Design code A350 LF3 CL2, BW, MSS-SP-97 A420 WPL3, BW, ASME B16.9 - A350 LF3 CL2, CL 900, RTJ, ASME B16.48 A350 LF3 CL2, CL 900, SW-RTJ, ASME B16.5 A350 LF3 CL2, CL 900, WN-RTJ, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 900, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF9CXI / BF9CMI BE9CJRI / BE9CJFI Check Valve CF9CXP CE9CJW / CE9CJS Gate Valve GF9CX / GF9CM GE9CJ Globe Valve LF9CX LE9CJ Needle Valve NF9CX / NF9CM - Gasket Bolt/Nuts 316L Octagonal Ring, CL 900, ASME B16.20 (Max. hardness is 160BHN) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 130 (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 41mm 44mm 47mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 81. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1AA3L Service To be specified Material Low Temperature Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection E1AA3L ASME B16.5 Pressure Class 900 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 12700 12700 12700 Size 1/2”-1 1/2” Pipe THK SCH 160 Material A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings ASME B31.3 8”-24” 26"-30" SCH 160 SCH 120 SCH 100 Note7 2”-3” 4”-6” A333 Gr. 3 SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 6000, SW, ASME Reducer B16.11 Sockolet A350 LF3 CL2, CL 6000, SW, MSS SP 97 Weldolet - Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, BW, MSS-SP-97 A350 LF3 CL2, CL 6000, SW, ASME Coupling - B16.11 Cap - Plug A350 LF3 CL2, NPT, ASME B16.11 Spectacle Blind, Design code A420 WPL3, BW, ASME B16.9 - A350 LF3 CL2, CL 900, RTJ, ASME B16.48 Spacer & Blanks A350 LF3 CL2, CL 900, SW-RTJ, ASME Flange(Note11) B16.5 Blind A350 LF3 CL2, CL 900,WN-RTJ, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 900, RTJ, ASME B16.5 Flange(Note11) Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF9CXI / BF9CMI BE9CJRI / BE9CJFI Check Valve CF9CXP CE9CJW / CE9CJS Gate Valve GF9CX / GF9CM GE9CJ Globe Valve LF9CX LE9CJ Needle Valve NF9CX / NF9CM - Gasket 316L Octagonal Ring, CL 900, ASME B16.20 (Max. hardness is 160BHN) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts green color. (Note3) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 38mm 41mm 43mm 131 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 82. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E0AA6L Service To be specified Material Low Temperature Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection E0AA6L ASME B16.5 Pressure Class 900 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 15320 15320 15040 13980 13520 Design code ASME B31.3 Size 1/2” 3/4” 1” 1 1/2” 2”-3” 4”-6” 8”-10” 12”-24” 26”-30” Pipe THK - - XXS XXS XXS SCH160 SCH140 SCH120 (Note7) Material A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 6000, SW, ASME B16.11 Reducer Sockolet A333 Gr. 3 SMLS, BE, ASME B36.10M Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, CL 6000, SW, MSS SP 97 Weldolet - Coupling A350 LF3 CL2, CL 6000, SW, ASME B16.11 Cap - Plug A350 LF3 CL2, NPT, ASME B16.11 Spectacle Blind, A350 LF3 CL2, BW, MSS-SP-97 A420 WPL3, BW, ASME B16.9 - A350 LF3 CL2, CL 900, RTJ, ASME B16.48 Spacer & Blanks Flange(Note11) A350 LF3 CL2, CL 900, SW-RTJ, ASME B16.5 Blind A350 LF3 CL2, CL 900, WN-RTJ, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 900, RTJ, ASME B16.5 Flange(Note11) Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF9CXIQ / BF9CMIQ BE9CJRIQ / BE9CJFIQ Check Valve CF9CXPQ CE9CJWQ / CE9CJSQ Gate Valve GF9CXQ / GF9CMQ GE9CJQ Globe Valve LF9CXQ LE9CJQ Needle Valve NF9CXQ / NF9CMQ - Gasket 316L Octagonal Ring, CL 900, ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 44mm 47mm 50mm 132 (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 83. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1AA6L Service To be specified Material Low Temperature Carbon Steel NDT Piping Class: Refer to Specification of Piping Inspection E1AA6L ASME B16.5 Pressure Class 900 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 12700 12700 12700 Size 1/2” 3/4” 1” 1 1/2” Pipe THK - - XXS XXS Material A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings ASME B31.3 A350 LF3 CL2, CL 6000, SW, ASME B16.11 Reducer Sockolet 2”-3” 4”-6” 8”-24” 26”-30” XXS SCH 160 SCH 120 (Note7) A333 Gr. 3 SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9 - Weldolet A350 LF3 CL2,BW, MSS SP 97 Coupling A350 LF3 CL2, CL 6000, SW, ASME B16.11 Cap - Plug A350 LF3 CL2, NPT, ASME B16.11 Spectacle Blind, Design code A350 LF3 CL2, BW, MSS-SP-97 A420 WPL3, BW, ASME B16.9 - A350 LF3 CL2, CL 900, RTJ, ASME B16.48 Spacer & Blanks Flange(Note11) A350 LF3 CL2, CL 900, SW-RTJ, ASME B16.5 Blind A350 LF3 CL2, CL 900,WN-RTJ, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 900, RTJ, ASME B16.5 Flange(Note11) Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF9CXIQ / BF9CMIQ BE9CJRIQ / BE9CJFIQ Check Valve CF9CXPQ CE9CJWQ / CE9CJSQ Gate Valve GF9CXQ / GF9CMQ GE9CJQ Globe Valve LF9CXQ LE9CJQ Needle Valve NF9CXQ / NF9CMQ - Gasket 316L Octagonal Ring, CL 900, ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts green color. (Note3) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 42mm 44mm 47mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 133 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 84. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E0AA3O Service To be specified Material Low Temperature Carbon Steel(NACE MR0175/ISO15156) NDT Piping Class: Refer to Specification of Piping Inspection E0AA3O(Note3) ASME B16.5 Pressure Class 900 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 15320 15320 15040 13980 13520 Size 1/2”-1 1/2” 2”-3” 4”-24” 26"-30" Pipe THK SCH 160 SCH 160 SCH 120 Note7 A333 Gr. 3 SMLS, PE, ASME B36.10M, Material NACE MR0175/ISO15156 Fittings A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 6000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 A350 LF3 CL2, CL 6000, SW, MSS SP Sockolet 97, NACE MR0175/ISO15156 Weldolet B16.11, NACE MR0175/ISO15156 A350 LF3 CL2, CL 6000, NPT, ASME Cap B16.11, NACE MR0175/ISO15156 A350 LF3 CL2, NPT, ASME B16.11, Plug NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange(Note11) Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, CL 6000, SW, ASME Coupling ASME B31.3 A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 - A350 LF3 CL2, CL 900, RTJ, ASME B16.48, NACE MR0175/ISO15156 A350 LF3 CL2, CL 900, SW-RTJ, ASME A350 LF3 CL2, CL 900, WN-RTJ, ASME B16.5, NACE B16.5, NACE MR0175/ISO15156 MR0175/ISO15156 (Note1) ASTM A350 LF3 CL2, CL 900, RTJ, ASME B16.5 , NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF9CXIV / BF9CMIV BE9CJRIV / BE9CJFIV Check Valve CF9CXPV CE9CJWV / CE9CJSV Gate Valve GF9CXV / GF9CMV GE9CJV Globe Valve LF9CXV LE9CJV Needle Valve NF9CXV / NF9CMV - Gasket 316L Octagonal Ring, NACE MR0175/ISO15156,CL 900, ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts ASTM A320 Gr.L7M Stud Bolt / A194 Gr.7ML HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with white color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 41mm 44mm 47mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 134 85. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1AA3O Service To be specified Material Low Temperature Carbon Steel(NACE MR0175/ISO15156) NDT Piping Class: Refer to Specification of Piping Inspection E1AA3O(Note3) ASME B16.5 Pressure Class 900 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 12700 12700 12700 Size Pipe THK 2”-3” 4”-6” 8”-24” 26"-30" SCH 160 SCH 160 SCH 120 SCH 100 Note7 NACE MR0175/ISO15156 Fittings ASME B31.3 1/2”-1 1/2” A333 Gr. 3 SMLS, PE, ASME B36.10M, Material A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 6000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 A350 LF3 CL2, CL 6000, SW, MSS SP Sockolet 97, NACE MR0175/ISO15156 Weldolet B16.11, NACE MR0175/ISO15156 Cap NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange(Note11) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 - A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, NPT, ASME B16.11, Plug Butt Weld Fittings: (Note1) A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, CL 6000, SW, ASME Coupling Design code - A350 LF3 CL2, CL 900, RTJ, ASME B16.48, NACE MR0175/ISO15156 A350 LF3 CL2, CL 900, SW-RTJ, ASME A350 LF3 CL2, B16.5, NACE MR0175/ISO15156 MR0175/ISO15156 (Note1) CL900,WN-RTJ, ASME B16.5, NACE ASTM A350 LF3 CL2, CL 900, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF9CXIV / BF9CMIV BE9CJRIV / BE9CJFIV Check Valve CF9CXPV CE9CJWV / CE9CJSV Gate Valve GF9CXV / GF9CMV GE9CJV Globe Valve LF9CXV LE9CJV Needle Valve NF9CXV / NF9CMV - Gasket 316L Octagonal Ring, NACE MR0175/ISO15156,CL 900, ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts ASTM A320 Gr.L7M Stud Bolt / A194 Gr.7ML HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with white color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 38mm 41mm 43mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 135 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 86. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E0AA6O Piping Class: Service BD, FL, FG Material Low Temperature Carbon Steel(NACE MR0175/ISO15156) NDT Refer to Specification of Piping Inspection E0AA6O (Note3) ASME B16.5 Pressure Class 900 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 15320 15320 15040 13980 13520 Design code ASME B31.3 Size 1/2” 3/4” 1” 1 1/2” 2”-3” 4”-6” 8”-10” 12”-24” 26”-30” Pipe THK - - XXS XXS XXS SCH160 SCH140 SCH120 (Note7) A333 Gr. 3 SMLS, PE, ASME B36.10M, Material NACE MR0175/ISO15156 Fittings A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 6000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 Sockolet A350 LF3 CL2, BW, MSS SP 97, NACE Weldolet MR0175/ISO15156 A350 LF3 CL2, CL 6000, SW, ASME Coupling B16.11, NACE MR0175/ISO15156 A350 LF3 CL2, CL 6000, NPT, ASME Cap B16.11, NACE MR0175/ISO15156 A350 LF3 CL2, NPT, ASME B16.11, Plug NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange(Note11) Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 - A350 LF3 CL2, CL 900, RTJ, ASME B16.48, NACE MR0175/ISO15156 A350 LF3 CL2, CL 900, SW-RTJ, ASME A350 LF3 CL2, CL 900, WN-RTJ, ASME B16.5, NACE B16.5, NACE MR0175/ISO15156 MR0175/ISO15156 (Note1) ASTM A350 LF3 CL2, CL 900, RTJ, ASME B16.5 , NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF9CXIQV / BF9CMIQV BE9CJRIQV / BE9CJFIQV Check Valve CF9CXPQV CE9CJWQV / CE9CJSQV Gate Valve GF9CXQV / GF9CMQV GE9CJQV Globe Valve LF9CXQV LE9CJQV Needle Valve NF9CXQV / NF9CMQV - Gasket 316L Octagonal Ring, NACE MR0175/ISO15156,CL 900, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts ASTM A320 Gr.L7M Stud Bolt / A194 Gr.7ML HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with white color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 44mm 47mm 50mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 136 87. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1AA6O Piping Class: Service BD, FL, FG Material Low Temperature Carbon Steel(NACE MR0175/ISO15156) NDT Refer to Specification of Piping Inspection E1AA6O (Note3) ASME B16.5 Pressure Class 900 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 12700 12700 12700 Size 1/2” 3/4” 1” 1 1/2” 2”-3” 4”-6” 8”-24” 26”-30” Pipe THK - - XXS XXS XXS SCH 160 SCH 120 (Note7) A333 Gr. 3 SMLS, PE, ASME B36.10M, Material NACE MR0175/ISO15156 Fittings ASME B31.3 A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 6000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 Sockolet A350 LF3 CL2, BW, MSS SP 97, NACE Weldolet MR0175/ISO15156 A350 LF3 CL2, CL 6000, SW, ASME Coupling B16.11, NACE MR0175/ISO15156 Cap NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange(Note11) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, NPT, ASME B16.11, Plug Butt Weld Fittings: (Note1) - A350 LF3 CL2, CL 900, RTJ, ASME B16.48, NACE MR0175/ISO15156 A350 LF3 CL2, CL 900, SW-RTJ, ASME A350 LF3 CL2, B16.5, NACE MR0175/ISO15156 MR0175/ISO15156 (Note1) CL900,WN-RTJ, ASME B16.5, NACE ASTM A350 LF3 CL2, CL 900, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF9CXIQV / BF9CMIQV BE9CJRIQV / BE9CJFIQV Check Valve CF9CXPQV CE9CJWQV / CE9CJSQV Gate Valve GF9CXQV / GF9CMQV GE9CJQV Globe Valve LF9CXQV LE9CJQV Needle Valve NF9CXQV / NF9CMQV - Gasket 316L Octagonal Ring, NACE MR0175/ISO15156,CL 900, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts ASTM A320 Gr.L7M Stud Bolt / A194 Gr.7ML HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with white color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 42mm 44mm 47mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 137 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 88. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS E0SA0L To be specified Material Piping Class: Stainless Steel NDT Refer to Specification of Piping Inspection E0SA0L ASME B16.5 Pressure Class 900 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 12410 12410 12010 10440 9420 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-3” 4"-6" 8”-24” 26"-30" Pipe THK SCH 80S SCH 40S SCH 80S SCH100 Note7 Material A312 TP316L SMLS, PE, ASME B36.19M Fittings A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) Forged Fittings: Elbow, Tee, A182 F316L, CL 6000, SW, ASME B16.11 Reducer Sockolet Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL 6000, SW, MSS-SP-97 Weldolet - Coupling A182 F316L, CL 6000, SW, ASME B16.11 Cap - Plug A182 F316L, NPT, ASME B16.11 Spectacle Blind, A182 F316L, BW, MSS-SP-97 A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL900，RTJ , ASME B16.48 Spacer & Blanks Flange(Note11) A182 F316L, CL 900, SW-RTJ, ASME B16.5 A182 F316L, CL 900, WN-RTJ, ASME B16.5 Blind A182 F316L, CL900，RTJ , ASME B16.5 Flange(Note11) A182 F316L, CL900，RTJ , ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF2CXZI / BF2CMZI BE2CJRZI / BE2CJFZI Check Valve CF2CXPZ CE2CJWZ / CE2CJSZ Gate Valve GF2CXZ / GF2CMZ GE2CJZ Globe Valve LF2CXZ LE2CJZ Needle Valve NF2CXZ / NF2CMZ - Gasket 316L Octagonal Ring, CL900, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 39mm 42mm 45mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 138 89. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1SA0L Service To be specified Piping Class: Material Stainless Steel ASME B16.5 Pressure Class 900 Corrosion Allowance: 0mm NDT Refer to Specification of Piping Inspection E1SA0L Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 10300 10300 10300 10300 9420 Size 1/2"-1 1/2" Pipe THK SCH 80S Material A312 TP316L SMLS, PE, ASME B36.19M Fittings Forged Fittings: Elbow, Tee, Design code ASME B31.3 2"-3” 4"-8" 10”-24” 26"-30" SCH 40S SCH 80S SCH 80 Note7 A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) Butt Weld Fittings: (Note1) A182 F316L, CL 6000, SW, ASME B16.11 A403 Gr. WP 316L, BW, ASME B16.9 Reducer Sockolet A182 F316L, CL 6000, SW, MSS-SP-97 Weldolet - Coupling A182 F316L, CL 6000, SW, ASME B16.11 Cap - Plug A182 F316L, NPT, ASME B16.11 Spectacle Blind, A182 F316L, BW, MSS-SP-97 A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL900，RTJ , ASME B16.48 Spacer & Blanks A182 F316L, CL 900, SW-RTJ, ASME Flange(Note11) B16.5 A182 F316L, CL 900, WN-RTJ, ASME B16.5 Blind Flange(Note11) A182 F316L, CL900，RTJ , ASME B16.5 A182 F316L, CL900，RTJ , ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF2CXZI / BF2CMZI BE2CJRZI / BE2CJFZI Check Valve CF2CXPZ CE2CJWZ / CE2CJSZ Gate Valve GF2CXZ / GF2CMZ GE2CJZ Globe Valve LF2CXZ LE2CJZ Needle Valve NF2CXZ / NF2CMZ - Gasket 316L Octagonal Ring, CL900, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with Bolt/Nuts red color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 33mm 36mm 38mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 139 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 90. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E0SA0N Service To be specified Piping Class: E0SA0N(Note3) Material Stainless Steel(NACE MR0175 /ISO15156) ASME B16.5 Pressure Class 900 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 50 100 150 Design Pressure (kPaG) 12410 12410 12010 10440 9420 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-3” 4"-6" 8”-24” 26"-30" Pipe THK SCH 80S SCH 40S SCH 80S SCH 100 Note7 A312 TP316L SMLS, PE, ASME B36.19M, Material NACE MR0175/ISO15156. Fittings A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6), NACE MR0175/ISO15156 Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A182 F316L, CL 6000, SW, ASME B16.11, A403 Gr. WP 316L, BW, ASME B16.9, NACE Reducer NACE MR0175/ISO15156. MR0175/ISO15156. A182 F316L, CL 6000, SW, MSS-SP-97, Sockolet - NACE MR0175/ISO15156. Weldolet - A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. A182 F316L, CL 6000, SW, ASME. B16.11 Coupling - NACE MR0175/ISO15156. Cap A403 Gr. WP 316L, BW, ASME B16.9, NACE - MR0175/ISO15156. A182 F316L, NPT, ASME B16.11, NACE Plug MR0175/ISO15156. Spectacle Blind, A182 F316L, CL900，RTJ , ASME B16.48, NACE MR0175/ISO15156. Spacer & Blanks A182 F316L, CL 900, SW-RTJ, ASME B16.5, A182 F316L, CL 900, WN-RTJ, ASME B16.5, NACE Flange(Note11) NACE MR0175/ISO15156. Blind Flange(Note11) MR0175/ISO15156. A182 F316L, CL900 ， RTJ , ASME B16.5, A182 F316L, CL900，RTJ , ASME B16.5, NACE NACE MR0175/ISO15156. MR0175/ISO15156. Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF2CXIV / BF2CMIV BE2CJRIV / BE2CJFIV Check Valve CF2CXPV CE2CJWV / CE2CJSV Gate Valve GF2CXV / GF2CMV GE2CJV Globe Valve LF2CXV LE2CJV Needle Valve NF2CXV / NF2CMV - Gasket 316L Octagonal Ring, CL900, NACE MR0175/ISO15156 ,ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with Bolt/Nuts red color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 39mm 42mm 45mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 140 91. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1SA0N Service To be specified Material Stainless Steel(NACE MR0175 /ISO15156) Piping Class: ASME B16.5 Pressure Class E1SA0N(Note3) 900 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 10300 10300 10300 9420 Size 1/2"-1 1/2" Pipe THK SCH 80S A312 TP316L SMLS, PE, ASME B36.19M, Material NACE MR0175/ISO15156. Fittings Design code ASME B31.3 2"-3” 4"-8" 10”-24” 26"-30" SCH 40S SCH 80S SCH 80 Note7 A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6), NACE MR0175/ISO15156 Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A182 F316L, CL 6000, SW, ASME B16.11, A403 Gr. WP 316L, BW, ASME B16.9, NACE Reducer NACE MR0175/ISO15156. MR0175/ISO15156. A182 F316L, CL 6000, SW, MSS-SP-97, NACE Sockolet - MR0175/ISO15156. Weldolet - A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. A182 F316L, CL 6000, SW, ASME. B16.11 Coupling - NACE MR0175/ISO15156. Cap A403 Gr. WP 316L, BW, ASME B16.9, NACE - MR0175/ISO15156. A182 F316L, NPT, ASME B16.11, NACE Plug MR0175/ISO15156. Spectacle Blind, A182 F316L, CL900，RTJ , ASME B16.48, NACE MR0175/ISO15156. Spacer & Blanks A182 F316L, CL 900, SW-RTJ, ASME B16.5, A182 F316L, CL 900, WN-RTJ, ASME B16.5, NACE Flange(Note11) NACE MR0175/ISO15156. Blind Flange(Note11) MR0175/ISO15156. A182 F316L, CL900，RTJ , ASME B16.5, NACE A182 F316L, CL900，RTJ , ASME B16.5, NACE MR0175/ISO15156. MR0175/ISO15156. Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF2CXIV / BF2CMIV BE2CJRIV / BE2CJFIV Check Valve CF2CXPV CE2CJWV / CE2CJSV Gate Valve GF2CXV / GF2CMV GE2CJV Globe Valve LF2CXV LE2CJV Needle Valve NF2CXV / NF2CMV - Gasket 316L Octagonal Ring, CL900, NACE MR0175/ISO15156 ,ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with Bolt/Nuts red color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 33mm 36mm 38mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 141 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 92. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E0SA0O Service To be specified Piping Class: E0SA0O(note3) Material Stainless Steel(NACE MR0175 /ISO15156) ASME B16.5 Pressure Class 900 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 12410 12410 12010 10440 9420 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-3” 4"-6" 8”-24” 26"-30" Pipe THK SCH 80S SCH 40S SCH 80S SCH100 Note7 A312 TP316L SMLS, PE, ASME B36.19M, Material NACE MR0175/ISO15156. Fittings A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6), NACE MR0175/ISO15156 Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A182 F316L, CL 6000, SW, ASME B16.11, A403 Gr. WP 316L, BW, ASME B16.9, NACE Reducer NACE MR0175/ISO15156. MR0175/ISO15156. A182 F316L, CL 6000, SW, MSS-SP-97,NACE Sockolet - MR0175/ISO15156. Weldolet - A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. A182 F316L, CL 6000, SW, ASME B16.11, Coupling - NACE MR0175/ISO15156. Cap A403 Gr. WP 316L, BW, ASME B16.9, NACE - MR0175/ISO15156. A182 F316L, NPT, ASME B16.11, NACE Plug MR0175/ISO15156. Spectacle Blind, - A182 F316L, CL900，RTJ , ASME B16.48, NACE MR0175/ISO15156. Spacer & Blanks A182 F316L, CL 900, SW-RTJ, ASME B16.5, A182 F316L, CL 900, WN-RTJ, ASME B16.5, NACE Flange(Note11) NACE MR0175/ISO15156. MR0175/ISO15156. Blind A182 F316L, CL900，RTJ , ASME B16.5, NACE A182 F316L, CL900，RTJ , ASME B16.5, NACE Flange(Note11) MR0175/ISO15156. MR0175/ISO15156. Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF2CXZIV / BF2CMZIV BE2CJRZIV / BE2CJFZIV Check Valve CF2CXPZV CE2CJWZV / CE2CJSZV Gate Valve GF2CXZV / GF2CMZV GE2CJZV Globe Valve LF2CXZV LE2CJZV NF2CXZV / NF2CMZV - Needle Valve Gasket 316L Octagonal Ring, CL900, NACE MR0175/ISO15156 , ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 39mm 42mm 45mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 142 93. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1SA0O Service To be specified Material Stainless Steel(NACE MR0175 /ISO15156) Piping Class: ASME B16.5 Pressure Class E1SA0O(note3) 900 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 10300 10300 10300 10300 9420 Size 1/2"-1 1/2" Pipe THK SCH 80S A312 TP316L SMLS, PE, ASME B36.19M, Material NACE MR0175/ISO15156. Fittings Design code ASME B31.3 2"-3” 4"-8" 10”-24” 26"-30" SCH 40S SCH 80S SCH80 Note7 A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6), NACE MR0175/ISO15156 Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A182 F316L, CL 6000, SW, ASME B16.11, A403 Gr. WP 316L, BW, ASME B16.9, NACE Reducer NACE MR0175/ISO15156. MR0175/ISO15156. A182 F316L, CL 6000, SW, MSS-SP-97, NACE Sockolet - MR0175/ISO15156. Weldolet - A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. A182 F316L, CL 6000, SW, ASME B16.11, Coupling - NACE MR0175/ISO15156. Cap A403 Gr. WP 316L, BW, ASME B16.9, NACE - Plug Spectacle Blind, MR0175/ISO15156. A182 F316L, NPT, ASME B16.11, NACE A182 F316L, CL900，RTJ , ASME B16.5, NACE MR0175/ISO15156. MR0175/ISO15156. A182 F316L, CL900，RTJ , ASME B16.48, NACE MR0175/ISO15156. Spacer & Blanks A182 F316L, CL 900, SW-RTJ, ASME B16.5, A182 F316L, CL 900, WN-RTJ, ASME B16.5, NACE Flange(Note11) NACE MR0175/ISO15156. MR0175/ISO15156. Blind A182 F316L, CL900，RTJ , ASME B16.5, NACE A182 F316L, CL900，RTJ , ASME B16.5, NACE Flange(Note11) MR0175/ISO15156. MR0175/ISO15156. Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF2CXZIV / BF2CMZIV BE2CJRZIV / BE2CJFZIV Check Valve CF2CXPZV CE2CJWZV / CE2CJSZV Gate Valve GF2CXZV / GF2CMZV GE2CJZV Globe Valve LF2CXZV LE2CJZV Needle Valve NF2CXZV / NF2CMZV - Gasket 316L Octagonal Ring, CL900, NACE MR0175/ISO15156 ,ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 33mm 36mm 38mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 143 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 94. ATTACHMENT B Service Material NDT PIPING SYSTEM SPECIFICATIONS E0SA0Z To be specified Piping Class: Stainless Steel ASME B16.5 Pressure Class 900 Corrosion Allowance: 0mm Refer to Specification of Piping Inspection E0SA0Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -29 38 50 100 150 Design Pressure (kPaG) 12410 12410 12010 10440 9420 ASME B31.3 Size 1/2"-1 1/2" 2"-3” 4"-6" 8”-24” 26"-30" Pipe THK SCH 80S SCH 40S SCH 80S SCH100 Note7 A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr Material A312 TP316L SMLS, PE, ASME B36.19M 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6). Fittings Forged Fittings: Elbow, Tee, A182 F316L, CL 6000, SW, ASME B16.11 Reducer Sockolet Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL 6000, SW, MSS-SP-97 Weldolet - Coupling A182 F316L, CL 6000, SW, ASME B16.11 Cap A182 F316L, CL 6000, NPT, ASME B16.11 Plug A182 F316L,NPT, ASME B16.11 Spectacle Blind, A182 F316L, BW, MSS-SP-97 A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL900，RTJ , ASME B16.48 Spacer & Blanks Flange(Note11) A182 F316L, CL 900, SW-RTJ, ASME B16.5 A182 F316L, CL 900, WN-RTJ, ASME B16.5 Blind Flange(Note11) A182 F316L, CL900，RTJ , ASME B16.5 Valves(Note11) A182 F316L, CL900，RTJ , ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF2CXI / BF2CMI BE2CJRI / BE2CJFI Check Valve CF2CXP CE2CJW / CE2CJS Gate Valve GF2CX / GF2CM GE2CJ Globe Valve LF2CX LE2CJ NF2CX / NF2CM - Needle Valve Gasket 316L Octagonal Ring, CL900, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with Bolt/Nuts red color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 39mm 42mm 45mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 144 95. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1SA0Z Service To be specified Piping Class: Material Stainless Steel ASME B16.5 Pressure Class 900 Corrosion Allowance: 0mm NDT Refer to Specification of Piping Inspection E1SA0Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 10300 10300 10300 9420 Size 1/2"-1 1/2" Pipe THK SCH 80S Material A312 TP316L SMLS, PE, ASME B36.19M Fittings A182 F316L, CL 6000, SW, ASME B16.11 Reducer Sockolet ASME B31.3 2"-3” 4"-8" 10”-24” 26"-30" SCH 40S SCH 80S SCH 80 Note7 A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6). Forged Fittings: Elbow, Tee, Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL 6000, SW, MSS-SP-97 Weldolet - Design code A182 F316L, BW, MSS-SP-97 Pipe Nipple A182 F316L, PE, L=100mm(Note1) - Coupling A182 F316L, CL 6000, SW, ASME B16.11 - Cap A182 F316L, CL 6000, NPT, ASME B16.11 Plug A182 F316L, NPT, ASME B16.11 Spectacle Blind, A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL900，RTJ , ASME B16.48 Spacer & Blanks Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F316L, CL 900, SW-RTJ, ASME B16.5 A182 F316L, CL 900, WN-RTJ, ASME B16.5 A182 F316L, CL900，RTJ , ASME B16.5 A182 F316L, CL900，RTJ , ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF2CXI / BF2CMI BE2CJRI / BE2CJFI Check Valve CF2CXP CE2CJW / CE2CJS Gate Valve GF2CX / GF2CM GE2CJ Globe Valve LF2CX LE2CJ Needle Valve NF2CX / NF2CM - Gasket 316L Octagonal Ring, CL900, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B8M CL2 Stud Bolt / A194 Gr. 8M HVY. HEX. S.F Nuts, PTFE Fluoropolymer Coating with red Bolt/Nuts color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 33mm 36mm 38mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 145 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 96. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS E0SI0N Piping Class: To be specified Duplex Stainless Steel(NACEMR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection E0SI0N(note3) ASME B16.5 Pressure Class 900 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 15510 15510 15200 13780 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-4" 6"-10" 10” 12”-14” 16”-24” 26"-30" Pipe THK SCH 80S SCH 40S SCH 80S SCH 80S SCH60 SCH80 Note7 A790 UNS S31803, A790 UNS S31803, SMLS, PE, ASME Material B36.19M,NACEMR0175/ISO15156 SMLS, BE, ASME A928 UNS 31803,,WELDED,BE, ASME B36.19M, NACEMR0175/ISO1515 B36.19M,NACE MR0175 / ISO15156,(Note6) 6 Fittings Forged Fittings: Elbow, Tee, A182 F51, CL 6000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 A182 F51, CL 6000, SW, NACE Sockolet MR0175/ISO15156,MSS-SP-97 Weldolet B16.11, NACEMR0175/ISO15156 Cap MR0175/ISO15156 Spectacle Blind, - A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 A182 F51,NPT, ASME B16.11, NACE Plug A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 A182 F51, BW, MSS-SP-97, NACE MR0175/ISO15156 A182 F51, CL 6000, SW, ASME Coupling Butt Weld Fittings: (Note1) - A182 F51, CL 900, RTJ, ASME B16.48, NACE MR0175/ISO15156 Spacer & Blanks Flange(Note11) Blind A182 F51, CL 900, SW-RTJ, ASME A182 F51, CL 900, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 B16.5, NACE MR0175/ISO15156 (Note1) A182 F51, CL 900, RTJ, ASME B16.5, NACE MR0175/ISO15156 Flange(Note11) Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF8EXIV / BF8EMIV BE8EJRIV / BE8EJFIV Check Valve CF8EXPV CE8EJWV / CE8EJSV Gate Valve GF8EXV / GF8EMV GE8EJV Globe Valve LF8EXV LE8EJV NF8EXV / NF8EMV - Needle Valve Gasket 316L Octagonal Ring, CL900, ASME B16.20 (Max. hardness is 160BHN), NACE MR0175/ISO15156 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating Bolt/Nuts with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 28mm 30mm 32mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 146 97. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS E1SI0N To be specified Duplex Stainless Steel(NACEMR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection Piping Class: E1SI0N(note3) ASME B16.5 Pressure Class 900 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 12900 12900 Size 1/2"-1 1/2" Pipe THK SCH 80S A790 UNS S31803, SMLS, PE, ASME Material B36.19M,NACE MR0175/ISO15156 Fittings ASME B31.3 2"-8" 10” -12" 14”-24” 26"-30" SCH 40S SCH 80S SCH60 Note7 A790 UNS S31803, SMLS, A182 F51, CL 6000, SW, ASME B16.11, Reducer NACE MR0175/ISO15156 A182 F51, CL 6000, SW, NACE Sockolet MR0175/ISO15156,MSS-SP-97 Weldolet NACE MR0175/ISO15156 Cap MR0175/ISO15156 Spectacle Blind, Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 - A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 A182 F51, NPT, ASME B16.11, NACE Plug B36.19M,NACE MR0175 / ISO15156, (Note4) NACE MR0175/ISO15156 A182 F51, BW, MSS-SP-97, NACE MR0175/ISO15156 A182 F51, CL 6000, SW, ASME B16.11, Coupling A928 UNS 31803,,WELDED,BE, ASME BE, ASME B36.19M, Forged Fittings: Elbow, Tee, Design code - A182 F51, CL 900, RTJ, ASME B16.48, NACE MR0175/ISO15156 Spacer & Blanks Flange(Note11) A182 F51, CL 900, SW-RTJ, ASME A182 F51, CL 900, WN-RTJ, ASME B16.5, NACE B16.5, NACE MR0175/ISO15156 MR0175/ISO15156 (Note1) Blind Flange(Note11) A182 F51, CL 900, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF8EXIV / BF8EMIV BE8EJRIV / BE8EJFIV Check Valve CF8EXPV CE8EJWV / CE8EJSV Gate Valve GF8EXV / GF8EMV GE8EJV Globe Valve LF8EXV LE8EJV Needle Valve NF8EXV / NF8EMV - Gasket 316L Octagonal Ring, CL900, ASME B16.20 (Max. hardness is 160BHN), NACEMR0175/ISO15156 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Bolt/Nuts Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 24mm 26mm 28mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 147 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 98. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS E0SI0Z Piping Class: To be specified Duplex Stainless Steel Material NDT Refer to Specification of Piping Inspection E0SI0Z ASME B16.5 Pressure Class 900 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 15510 15510 15200 13780 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-4" 6"-8" 10” 12”-14” 16”-24” 26"-30" Pipe THK SCH 80S SCH 40S SCH 80S SCH 80S SCH60 SCH80 Note7 A790 UNS S31803, SMLS, PE, A790 UNS S31803, SMLS, A928 UNS S31803,,WELDED BE, ASME Material ASME B36.19M Fittings BE, ASME B36.19M Forged Fittings: Elbow, Tee, A182 F51, CL 6000, SW, ASME Reducer B16.11 A182 F51, CL 6000, SW, Sockolet MSS-SP-97 Weldolet - A815 UNS S31803, BW, ASME B16.9 A182 F51, BW, MSS-SP-97 A182 F51, CL 6000, SW, ASME Coupling B36.19M(Note6) Butt Weld Fittings: (Note1) B16.11 - Cap - A815 UNS S31803, BW, ASME B16.9 Plug A182 F51, NPT, ASME B16.11 - Spectacle Blind, A182 F51, CL 900, RTJ, ASME B16.48 Spacer & Blanks A182 F51, CL 900, SW-RTJ, Flange(Note11) ASME B16.5 Blind A182 F51, CL 900, WN-RTJ, ASME B16.5 (Note1) A182 F51, CL 900, RTJ, ASME B16.5 Flange(Note11) Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF8EXI / BF8EMI BE8EJRI / BE8EJFI Check Valve CF8EXP CE8EJW / CE8EJS Gate Valve GF8EX / GF8EM GE8EJ Globe Valve LF8EX LE8EJ NF8EX / NF8EM - Needle Valve Gasket 316L Octagonal Ring, CL900, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating Bolt/Nuts with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 28mm 30mm 32mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 148 99. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS E1SI0Z Piping Class: To be specified Duplex Stainless Steel Material NDT Refer to Specification of Piping Inspection E1SI0Z ASME B16.5 Pressure Class 900 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 12900 12900 Size Pipe THK Material ASME B31.3 1/2"-1 1/2" 2"-8" SCH 80S SCH 40S BE, ASME B36.19M A182 F51, CL 6000, SW, ASME B16.11 A182 F51, CL 6000, SW, MSS-SP-97 - UNS SCH60 B36.19M(Note6) Reducer S31803,WELDED 26"-30" Note7 BE, ASME Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9 A182 F51, BW, MSS-SP-97 A182 F51, CL 6000, SW, ASME B16.11 - Cap - Plug A182 F51, NPT, ASME B16.11 - Spectacle Blind, SCH 80S ASME B36.19M Elbow, Tee, Coupling 14”-24” A928 Forged Fittings: Weldolet 10” -12" A790 UNS S31803, SMLS, PE, A790 UNS S31803, SMLS, Fittings Sockolet Design code A815 UNS S31803, BW, ASME B16.9 A182 F51, CL 900, RTJ, ASME B16.48 Spacer & Blanks A182 F51, CL 900, SW-RTJ, Flange(Note11) ASME B16.5 Blind A182 F51, CL 900, WN-RTJ, ASME B16.5 (Note1) A182 F51, CL 900, RTJ, ASME B16.5 Flange(Note11) Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF8EXI / BF8EMI BE8EJRI / BE8EJFI Check Valve CF8EXP CE8EJW / CE8EJS Gate Valve GF8EX / GF8EM GE8EJ Globe Valve LF8EX LE8EJ Needle Valve NF8EX / NF8EM - Gasket 316L Octagonal Ring, CL900, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection is used only for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 24mm 26mm 28mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 149 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 100. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS E0SK0N Piping Class: To be specified Supper duplex Stainless Steel(NACE MR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection E0SK0N(Note3) ASME B16.5 Pressure Class 900 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 15510 15510 15200 13780 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-6" 8" 10” -12” 14” 16”-24” 26"-30" Pipe THK SCH 80S SCH 40S SCH 80S SCH 80S XS SCH60 Note7 A790 UNS S32750, SMLS, PE, ASME Material B36.19M, NACE MR0175/ISO15156 Fittings A790 UNS S32750, SMLS, BE, ASME B36.19M, NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, A182 F53, CL 6000, SW, ASME B16.11, Reducer NACE MR0175/ISO15156 A182 F53, CL 6000, SW, NACE Sockolet MR0175/ISO15156,MSS-SP-97 Weldolet NACE MR0175/ISO15156 Cap MR0175/ISO15156 Spectacle Blind, Spacer & Blanks Flange(Note11) Blind Flange(Note11) Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 - A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 A182 F53, NPT, ASME B16.11, NACE Plug B36.19M,NACE MR0175 / ISO15156 (Note6) A182 F53, BW, MSS-SP-97, NACE MR0175/ISO15156 A182 F53, CL 6000, SW, ASME B16.11, Coupling A928 UNS 31803,,WELDED,BE, ASME - A182 F53, CL 900, RTJ, ASME B16.48, NACE MR0175/ISO15156 A182 F53, CL 900, SW-RTJ, ASME A182 F53, CL 900, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 B16.5, NACE MR0175/ISO15156 (Note1) A182 F53, CL 900, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF10PXIV / BF10PMIV BE10PJRIV / BE10PJFIV Check Valve CF10PXPV CE10PJWV / CE10PJSV Gate Valve GF10PXV / GF10PMV GE10PJV Globe Valve LF10PXV LE10PJV NF10PXV / NF10PMV - Needle Valve Gasket 316L Octagonal Ring, CL900, ASME B16.20 (Max. hardness is 160BHN), NACE MR0175/ISO15156 Bolt/Nuts ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 22mm 24mm 25mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 150 101. Service ATTACHMENT B PIPING SYSTEM SPECIFICATIONS E1SK0N To be specified Supper duplex Stainless Steel(NACE MR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection Piping Class: E1SK0N(Note3) ASME B16.5 Pressure Class 900 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 12900 12900 Size 1/2"-1 1/2" Pipe THK SCH 80S Design code ASME B31.3 2"-8" 10"-12” 14”-16” 18”-24” 26"-30" SCH 40S SCH80S SCH60 SCH60 Note7 A790 UNS S32750, Material A790 UNS S32750, SMLS, PE, ASME SMLS, BE, ASME A928 UNS 31803,,WELDED,BE, ASME B36.19M, NACE MR0175/ISO15156 B36.19M,NACE MR0175 / ISO15156,(Note6) B36.19M,NACE MR0175/ISO15156 Fittings Forged Fittings: Elbow, Tee, A182 F53, CL 6000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 A182 F53, CL 6000, SW, NACE Sockolet MR0175/ISO15156,MSS-SP-97 Weldolet B16.11, NACE MR0175/ISO15156 Cap MR0175/ISO15156 Spectacle Blind, - A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 A182 F53, NPT, ASME B16.11, NACE Plug A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 A182 F53, BW, MSS-SP-97, NACE MR0175/ISO15156 A182 F53, CL 6000, SW, ASME Coupling Butt Weld Fittings: (Note1) - A182 F53, CL 900, RTJ, ASME B16.48, NACE MR0175/ISO15156 Spacer & Blanks Flange(Note11) A182 F53, CL 900, SW-RTJ, ASME A182 F53, CL 900, WN-RTJ, ASME B16.5, NACE B16.5, NACE MR0175/ISO15156 MR0175/ISO15156 (Note1) Blind Flange(Note11) A182 F53, CL 900, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF10PXIV / BF10PMIV BE10PJRIV / BE10PJFIV Check Valve CF10PXPV CE10PJWV / CE10PJSV Gate Valve GF10PXV / GF10PMV GE10PJV Globe Valve LF10PXV LE10PJV Needle Valve NF10PXV / NF10PMV - Gasket 316L Octagonal Ring, CL900, ASME B16.20 (Max. hardness is 160BHN), NACE MR0175/ISO15156 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Bolt/Nuts Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 19mm 21mm 22mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 151 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 102. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS E0SK0Z Piping Class: To be specified Supper Duplex Stainless Steel Material NDT Refer to Specification of Piping Inspection E0SK0Z ASME B16.5 Pressure Class 900 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 15510 15510 15200 13780 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-6" 8" 10” -12” 14” 16”-24” 26"-30" Pipe THK SCH 80S SCH 40S SCH 80S SCH 80S XS SCH60 Note7 A928 S32750,,WELDED A790 UNS S32750, SMLS, PE, Material ASME B36.19M Fittings A790 UNS S32750, SMLS, BE, ASME B36.19M Forged Fittings: Elbow, Tee, A182 F53, CL 6000, SW, Reducer ASME B16.11 A182 F53, CL 6000, SW, Sockolet MSS-SP-97 Weldolet ASME B16.11 A815 UNS S32750, BW, ASME B16.9 - - - Plug A182 F53, NPT, ASME B16.11 - A815 UNS S32750, BW, ASME B16.9 A182 F53, CL 900, RTJ, ASME B16.48 Spacer & Blanks A182 F53, CL 900, SW-RTJ, Flange(Note11) ASME B16.5 Blind A182 F53, CL 900, WN-RTJ, ASME B16.5 (Note1) A182 F53, CL 900, RTJ, ASME B16.5 Flange(Note11) Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF10PXI / BF10PMI BE10PJRI / BE10PJFI Check Valve CF10PXP CE10PJW / CE10PJS Gate Valve GF10PX / GF10PM GE10PJ Globe Valve LF10PX LE10PJ NF10PX / NF10PM - Needle Valve Gasket 316L Octagonal Ring, CL900, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating Bolt/Nuts with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 22mm 24mm 25mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 152 ASME Butt Weld Fittings: (Note1) Cap Spectacle Blind, BE, A182 F53, BW, MSS-SP-97 A182 F53, CL 6000, SW, Coupling UNS B36.19M(Note6) 103. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS E1SK0Z Piping Class: To be specified Supper Duplex Stainless Steel Material NDT Refer to Specification of Piping Inspection E1SK0Z ASME B16.5 Pressure Class 900 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 12900 12900 Size Pipe THK Material ASME B31.3 1/2"-1 1/2" 2"-8" SCH 80S SCH 40S SCH 80S SCH60 SCH60 Note7 6.19M(Note6) A182 F53, CL 6000, SW, Reducer ASME B16.11 A182 F53, CL 6000, SW, MSS-SP-97 - BE, ASME B36.19M Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9 A182 F53, BW, MSS-SP-97 A182 F53, CL 6000, SW, ASME B16.11 - Cap - Plug A182 F53,NPT, ASME B16.11 - Spectacle Blind, 18”-24” 26"-30" ASME B36.19M Elbow, Tee, Coupling 14” -16” A928 UNS S32750,,WELDED BE, ASME B3 Forged Fittings: Weldolet 10"-12” A790 UNS S32750, SMLS, PE, A790 UNS S32750, SMLS, Fittings Sockolet Design code A815 UNS S32750, BW, ASME B16.9 A182 F53, CL 900, RTJ, ASME B16.48 Spacer & Blanks A182 F53, CL 900, SW-RTJ, Flange(Note11) ASME B16.5 Blind A182 F53, CL 900, WN-RTJ, ASME B16.5 (Note1) A182 F53, CL 900, RTJ, ASME B16.5 Flange(Note11) Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 900 Ball Valve BF10PXI / BF10PMI BE10PJRI / BE10PJFI Check Valve CF10PXP CE10PJW / CE10PJS Gate Valve GF10PX / GF10PM GE10PJ Globe Valve LF10PX LE10PJ Needle Valve NF10PX / NF10PM - Gasket 316L Octagonal Ring, CL900, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 26” 28” 30” 19mm 21mm 22mm (11) Flanges of NPS 26” and above shall comply with ASME B16.47 series A. 153 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 104. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F0CA3N To be specified Piping Class: F0CA3N(note3) Material Carbon Steel(NACE MR0175/ISO15156) ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection Corrosion Allowance: 1500 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 Size Pipe THK 2"-6" 8” 10” 12” 14” 16” 18” 20”-24” XXS XXS 26 32 36 40 46 50 Note7 NACE MR0175/ISO15156. Fittings ASME B31.3 1/2"-1 1/2" A106 Gr. B SMLS, PE, ASME B36.10M, Material A106 Gr. B SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156. Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A105, CL 9000, SW, ASME B16.11, Reducer NACE MR0175/ISO15156. Sockolet A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. - - A105, BW, MSS-SP-97, NACE Weldolet A105, BW, MSS-SP-97, NACE MR0175/ISO15156. MR0175/ISO15156. A105, CL 9000, SW, ASME B16.11, Coupling - NACE MR0175/ISO15156. Cap A105, Plug Design code A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. NPT, ASME B16.11, NACE - MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A105, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11) Flange(Note11) Blind Flange(Note11) A105, CL 1500, SW-RTJ, ASME B16.5, A105, CL 1500, WN-RTJ, ASME B16.5 (Note1) , NACE NACE MR0175/ISO15156. MR0175/ISO15156. A105, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156. Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIV / BF1CMIV BF1CJRIV / BF1CJFIV Check Valve CF1CXPV CF1CJWV / CF1CJSV Gate Valve GF1CXV / GF1CMV GF1CJV Globe Valve LF1CXV LF1CJV Needle Valve NF1CXV / NF1CMV - Gasket 316L Octagonal Ring, CL 1500, NACE MR0175/ISO15156 ,ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 20” 24” 54mm 64mm 154 105. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F1CA3N Service To be specified Material Carbon Steel(NACE MR0175/ISO15156) Piping Class: ASME B16.5 Pressure Class F1CA3N(note3) NDT Refer to Specification of Piping Inspection Corrosion Allowance: Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 22100 22100 Size Pipe THK Material Fittings XXS SCH 160 Butt Weld Fittings: (Note1) A105, CL 9000, SW, ASME B16.11, Reducer NACE MR0175/ISO15156. Sockolet Coupling Cap Plug A106 Gr. B SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156. Forged Fittings: Elbow, Tee, Weldolet ASME B31.3 2”-24” NACE MR0175/ISO15156. A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. - - A105, BW, MSS-SP-97, NACE A105, BW, MSS-SP-97, NACE MR0175/ISO15156. MR0175/ISO15156. A105, CL 9000, SW, ASME B16.11, - NACE MR0175/ISO15156. A105, 3mm Design code 1/2"-1 1/2" A106 Gr. B SMLS, PE, ASME B36.10M, 1500 A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. NPT, ASME B16.11, NACE - MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A105, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11) Flange(Note11) Blind Flange(Note11) A105, CL 1500, SW-RTJ, ASME B16.5, A105, CL 1500, WN-RTJ, ASME B16.5 (Note1) , NACE NACE MR0175/ISO15156. MR0175/ISO15156. A105, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156. Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIV / BF1CMIV BF1CJRIV / BF1CJFIV Check Valve CF1CXPV CF1CJWV / CF1CJSV Gate Valve GF1CXV / GF1CMV GF1CJV Globe Valve LF1CXV LF1CJV NF1CXV / NF1CMV - Needle Valve Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, NACE MR0175/ISO15156 , ASME B16.20 (Max. hardness is 160HB) ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 155 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 106. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F2CA3N To be specified Piping Class: F2CA3N(note3) Material Carbon Steel(NACE MR0175/ISO15156) ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection Corrosion Allowance: 1500 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 18700 18700 Design code ASME B31.3 Size 1/2" 3/4"-1 1/2" 2"-6" 8"-24" Pipe THK XXS SCH 160 SCH 160 SCH 140 Material A106 Gr. B SMLS, PE,ASME B36.10M, A106 Gr. B SMLS, BE, ASME B36.10M, NACE NACE MR0175/ISO15156. MR0175/ISO15156. Fittings Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A105, CL 9000, SW, ASME B16.11, NACE Reducer MR0175/ISO15156. Sockolet Weldolet Coupling Cap Plug A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. - - A105, BW, MSS-SP-97, NACE A105, BW, MSS-SP-97, NACE MR0175/ISO15156. MR0175/ISO15156. A105, CL 9000, SW, ASME B16.11, NACE - MR0175/ISO15156. A105,NPT, A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. ASME B16.11, NACE - MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A105, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11) Flange(Note11) Blind Flange(Note11) A105, CL 1500, SW-RTJ, ASME B16.5, A105, CL 1500, WN-RTJ, ASME B16.5 (Note1) , NACE NACE MR0175/ISO15156. MR0175/ISO15156. A105, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156. Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIV / BF1CMIV BF1CJRIV / BF1CJFIV Check Valve CF1CXPV CF1CJWV / CF1CJSV Gate Valve GF1CXV / GF1CMV GF1CJV Globe Valve LF1CXV LF1CJV Needle Valve NF1CXV / NF1CMV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, NACE MR0175/ISO15156 ,ASME B16.20 (Max. hardness is 160HB) ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 156 107. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F0CA6N Service To be specified Material Carbon Steel(NACE MR0175/ISO15156) Piping Class: ASME B16.5 Pressure Class F0CA6N(note3) NDT Refer to Specification of Piping Inspection Corrosion Allowance: 1500 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 Size Pipe THK(mm) 3/4” 1" 1 1/2” 2" 3" 4" 6" 8” 10” 12” 14” 16” 18” 20”-24” 9 10 11 12 13 16 19 24 29 35 39 42 47 52 Note7 B36.10M, NACE MR0175/ISO15156. Fittings A106 Gr. B SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156. Forged Fittings: Elbow, Tee, A105, CL 9000, SW, ASME B16.11, Reducer NACE MR0175/ISO15156. Sockolet Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. A105, BW, MSS-SP-97, NACE Weldolet MR0175/ISO15156. A105, BW, MSS-SP-97, NACE MR0175/ISO15156. A105, CL 9000, SW, ASME B16.11, Coupling - NACE MR0175/ISO15156. Cap - A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. A105, NPT, ASME B16.11, NACE Plug ASME B31.3 1/2" A106 Gr. B SMLS, PE, ASME Material Design code - MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A105, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11) Flange(Note11) Blind Flange(Note11) A105, CL 1500, SW-RTJ, ASME A105, CL 1500, WN-RTJ, ASME B16.5 (Note1) , NACE B16.5, NACE MR0175/ISO15156. MR0175/ISO15156. A105, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156. Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIQV / BF1CMIQV BF1CJRIQV / BF1CJFIQV Check Valve CF1CXPQV CF1CJWQV / CF1CJSQV Gate Valve GF1CXQV / GF1CMQV GF1CJQV Globe Valve LF1CXQV LF1CJQV NF1CXQV / NF1CMQV - Needle Valve Gasket 316L Octagonal Ring, CL 1500, NACE MR0175/ISO15156 ,ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 20” 24” 57mm 67mm 157 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 108. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F1CA6N To be specified Piping Class: F1CA6N(note3) Material Carbon Steel(NACE MR0175/ISO15156) ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection Corrosion Allowance: 1500 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 22100 22100 Size Pipe THK(mm) ASME B31.3 1/2" 3/4" 1” 1 1/2" 2" 3"-6" 8” 10” 12” 14” 16” 18” 20”-24” - - - 12 13 XXS 26 31 35 38 42 47 Note7 A106 Gr. B SMLS, PE, ASME B36.10M, Material NACE MR0175/ISO15156. Fittings A106 Gr. B SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156. Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A105, CL 9000, SW, ASME B16.11, Reducer NACE MR0175/ISO15156. Sockolet A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. - - A105, BW, MSS-SP-97, NACE Weldolet A105, BW, MSS-SP-97, NACE MR0175/ISO15156. MR0175/ISO15156. A105, CL 9000, SW, ASME B16.11, Coupling - NACE MR0175/ISO15156. Cap A105, Plug Design code A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. NPT, ASME B16.11, NACE - MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A105, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11) Flange(Note11) Blind Flange(Note11) A105, CL 1500, SW-RTJ, ASME B16.5, A105, CL 1500, WN-RTJ, ASME B16.5 (Note1) , NACE NACE MR0175/ISO15156. MR0175/ISO15156. A105, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156. Valves ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIQV / BF1CMIQV BF1CJRIVQ / BF1CJFIQV Check Valve CF1CXPQV CF1CJWQV / CF1CJSQV Gate Valve GF1CXQV / GF1CMQV GF1CJQV Globe Valve LF1CXQV LF1CJQV Needle Valve NF1CXQV / NF1CMQV - Gasket 316L Octagonal Ring, CL 1500, NACE MR0175/ISO15156 , ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 20” 24” 51mm 60mm 158 109. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F2CA6N Service To be specified Material Carbon Steel(NACE MR0175/ISO15156) Piping Class: ASME B16.5 Pressure Class F2CA6N(note3) NDT Refer to Specification of Piping Inspection Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 18700 18700 Size Pipe THK(mm) Material 3/4" 1" 1 1/2" - - - - 2" 3"-6" 8"-18" 20”-24” 12 XXS SCH 160 Note7 A106 Gr. B SMLS, PE, ASME B36.10M, A106 Gr. B SMLS, BE, ASME B36.10M, NACE NACE MR0175/ISO15156. MR0175/ISO15156. Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A105, CL 9000, SW, ASME B16.11, NACE Reducer MR0175/ISO15156. Sockolet A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. - - A105, BW, MSS-SP-97, NACE Weldolet A105, BW, MSS-SP-97, NACE MR0175/ISO15156. MR0175/ISO15156. A105, CL 9000, SW, ASME B16.11, NACE Coupling - MR0175/ISO15156. Cap - A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. A105,NPT, Plug Design code ASME B31.3 1/2" Fittings 1500 ASME B16.11, NACE - MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A105, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11) Flange(Note11) Blind Flange(Note11) A105, CL 1500, SW-RTJ, ASME B16.5, A105, CL 1500, WN-RTJ, ASME B16.5 (Note1) , NACE NACE MR0175/ISO15156. MR0175/ISO15156. A105, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156. Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIQV / BF1CMIQV BF1CJRIVQ / BF1CJFIVQ Check Valve CF1CXPQV CF1CJWVQ / CF1CJSVQ Gate Valve GF1CXQV / GF1CMQV GF1CJVQ Globe Valve LF1CXQV LF1CJVQ NF1CXQV / NF1CMQV - Needle Valve Gasket 316L Octagonal Ring, CL 1500, NACE MR0175/ISO15156 ,ASME B16.20 (Max. hardness is 160HB) ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating Bolt/Nuts with yellow color. (Note4) Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 20” 24” SCH140 SCH140 159 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 110. ATTACHMENT B Service Material NDT PIPING SYSTEM SPECIFICATIONS F0CA3Z To be specified Piping Class: Carbon Steel ASME B16.5 Pressure Class Refer to Specification of Piping Inspection F0CA3Z 1500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 Size 1/2"-1 1/2" 2"-6" Pipe THK XXS XXS Material A106 Gr. B SMLS, PE,ASME B36.10M Fittings Forged Fittings: Elbow, Tee, Reducer A105, CL 9000, SW, ASME B16.11 Sockolet 8” Design code ASME B31.3 18” 20”-24” 26mm 32mm 36mm 40mm 46mm 50mm 10” 12” 14” Note7 A106 Gr. B SMLS, BE, ASME B36.10M Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 - Weldolet A105, BW, MSS-SP-97 Coupling A105, CL 9000, SW, ASME B16.11 Cap - Plug A105, NPT, ASME B16.11 16” A105, BW, MSS-SP-97 A234 Gr. WPB, BW, ASME B16.9 - Spectacle Blind, Spacer & Blanks A105, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A105, CL 1500, SW-RTJ, ASME B16.5 A105, CL 1500, WN-RTJ, ASME B16.5 (Note1) A105, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXI / BF1CMI BF1CJRI / BF1CJFI Check Valve CF1CXP CF1CJW / CF1CJS Gate Valve GF1CX / GF1CM GF1CJ Globe Valve LF1CX LF1CJ Needle Valve NF1CX / NF1CM - Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 20” 24” 54mm 64mm 160 111. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F1CA3Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection F1CA3Z Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 22100 22100 Size Pipe THK Material Reducer Design code ASME B31.3 1/2"-1 1/2" 2"-24" XXS SCH 160 A106 Gr. B SMLS, PE,ASME B36.10M A106 Gr. B SMLS, BE, ASME B36.10M Fittings Elbow, Tee, 1500 Forged Fittings: A105, CL 9000, SW, ASME B16.11 Sockolet Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 - Weldolet A105, BW, MSS-SP-97 Coupling A105, CL 9000, SW, ASME B16.11 Cap - Plug A105, NPT, ASME B16.11 A105, BW, MSS-SP-97 A234 Gr. WPB, BW, ASME B16.9 - Spectacle Blind, Spacer & Blanks A105, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A105, CL 1500, SW-RTJ, ASME B16.5 A105, CL 1500, WN-RTJ, ASME B16.5 (Note1) A105, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXI / BF1CMI BF1CJRI / BF1CJFI Check Valve CF1CXP CF1CJW / CF1CJS Gate Valve GF1CX / GF1CM GF1CJ Globe Valve LF1CX LF1CJ NF1CX / NF1CM - Needle Valve Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. 161 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 112. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F2CA3Z To be specified Material Piping Class: Carbon Steel NDT F2CA3Z ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 1500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 18700 18700 Design code ASME B31.3 Size 1/2" 3/4"-1 1/2" 2"-6" 8"-24" Pipe THK XXS SCH 160 SCH 160 SCH 140 Material A106 Gr. B SMLS, PE,ASME B36.10M Fittings Elbow, Tee, Reducer A106 Gr. B SMLS, BE, ASME B36.10M Forged Fittings: A105, CL 9000, SW, ASME B16.11 Sockolet Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 - Weldolet A105, BW, MSS-SP-97 Coupling A105, CL 9000, SW, ASME B16.11 Cap - Plug A105, NPT, ASME B16.11 A105, BW, MSS-SP-97 A234 Gr. WPB, BW, ASME B16.9 - Spectacle Blind, Spacer & Blanks A105, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A105, CL 1500, SW-RTJ, ASME B16.5 A105, CL 1500, WN-RTJ, ASME B16.5 (Note1) A105, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXI / BF1CMI BF1CJRI / BF1CJFI Check Valve CF1CXP CF1CJW / CF1CJS Gate Valve GF1CX / GF1CM GF1CJ Globe Valve LF1CX LF1CJ Needle Valve NF1CX / NF1CM - Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. 162 113. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F0CA6Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection F0CA6Z 1500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 Size Pipe THK(mm) 3/4” 1" 1 1/2” 2" 3" 4" 6" 8” 10” 12” 14” 16” 18” 20”-24” 9 10 11 12 13 16 19 24 29 35 39 42 47 52 Note7 B36.10M Fittings A106 Gr. B SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, Reducer ASME B31.3 1/2" A106 Gr. B SMLS, PE,ASME Material Design code Butt Weld Fittings: (Note1) A105, CL 9000, SW, ASME B16.11 A234 Gr. WPB, BW, ASME B16.9 Sockolet - Weldolet A105, BW, MSS-SP-97 Coupling A105, CL 9000, SW, ASME B16.11 Cap - Plug A105, NPT, ASME B16.11 A105, BW, MSS-SP-97 A234 Gr. WPB, BW, ASME B16.9 - Spectacle Blind, Spacer & Blanks A105, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange (Note11) A105, CL 1500, SW-RTJ, ASME B16.5 A105, CL 1500, WN-RTJ, ASME B16.5 (Note1) A105, CL 1500, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIQ / BF1CMIQ BF1CJRIQ / BF1CJFIQ Check Valve CF1CXPQ CF1CJWQ / CF1CJSQ Gate Valve GF1CXQ / GF1CMQ GF1CJQ Globe Valve LF1CXQ LF1CJQ NF1CXQ / NF1CMQ - Needle Valve Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 20” 24” 26” 57mm 67mm 28” 163 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 114. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F1CA6Z To be specified Material Piping Class: Carbon Steel NDT Refer to Specification of Piping Inspection F1CA6Z ASME B16.5 Pressure Class 1500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 22100 22100 Size Pipe THK(mm) 3/4" 1” 1 1/2" 2" 3"-6" 8” 10” 12” 14” 16” 18” 20”-24” - - - 12 13 XXS 26 31 35 38 42 47 Note7 A106 Gr. B SMLS, PE,ASME B36.10M Fittings Forged Fittings: Reducer A105, CL 9000, SW, ASME B16.11 Sockolet ASME B31.3 1/2" Material Elbow, Tee, Design code A106 Gr. B SMLS, BE, ASME B36.10M Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 - Weldolet A105, BW, MSS-SP-97 Coupling A105, CL 9000, SW, ASME B16.11 Cap - Plug A105, NPT, ASME B16.11 A105, BW, MSS-SP-97 A234 Gr. WPB, BW, ASME B16.9 - Spectacle Blind, Spacer & Blanks A105, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) A105, CL 1500, SW-RTJ, ASME B16.5 A105, CL 1500, WN-RTJ, ASME B16.5 (Note1) A105, CL 1500, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIQ / BF1CMIQ BF1CJRIQ / BF1CJFIQ Check Valve CF1CXPQ CF1CJWQ / CF1CJSQ Gate Valve GF1CXQ / GF1CMQ GF1CJQ Globe Valve LF1CXQ LF1CJQ Needle Valve NF1CXQ / NF1CMQ - Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 20” 24” 51mm 60mm 164 115. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F2CA6Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection F2CA6Z 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 18700 18700 Size Pipe THK(mm) Material 1/2" 3/4" 1" 1 1/2" - - - - Reducer A105, CL 9000, SW, ASME B16.11 Sockolet - Weldolet A105, BW, MSS-SP-97 Coupling A105, CL 9000, SW, ASME B16.11 Cap - Plug A105, NPT, ASME B16.11 2" 3"-6" 8"-18" 20”-24” 12 XXS SCH 160 Note7 A106 Gr. B SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, Design code ASME B31.3 A106 Gr. B SMLS, PE,ASME B36.10M Fittings 1500 Corrosion Allowance: Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 A105, BW, MSS-SP-97 A234 Gr. WPB, BW, ASME B16.9 - Spectacle Blind, Spacer & Blanks A105, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) A105, CL 1500, SW-RTJ, ASME B16.5 A105, CL 1500, WN-RTJ, ASME B16.5 (Note1) A105, CL 1500, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIQ / BF1CMIQ BF1CJRIQ / BF1CJFIQ Check Valve CF1CXPQ CF1CJWQ / CF1CJSQ Gate Valve GF1CXQ / GF1CMQ GF1CJQ Globe Valve LF1CXQ LF1CJQ NF1CXQ / NF1CMQ - Needle Valve Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Note: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 20” 24” SCH140 SCH140 165 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 116. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F0CF3N To be specified High Strength Carbon Steel NACE MR0175/ISO15156 Material NDT Refer to Specification of Piping Inspection Piping Class: F0CF3N(Note 3) ASME B16.5 Pressure Class 1500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 Size 1/2" 3/4” 1" 1 1/2” 2" Pipe THK XXS XXS XXS XXS XXS API 5L X65 PSL2 SMLS, PE, ASME Material B36.10M,NACE MR0175/ISO15156 Fittings 3" A694 F65, CL 9000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156. Sockolet A694 F65, BW, MSS-SP-97, NACE Weldolet MR0175/ISO15156. (Note1) ASME B31.3 6" 8” 10” 12” 14” SCH160 16” SCH160 18” 20”-24” Note 7 API 5L X65 PSL2 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, 4" Design code Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A694 F65, BW, MSS-SP-97, NACE MR0175/ISO15156 A694 F65, CL 9000, SW, ASME Coupling B16.11, NACE MR0175/ISO15156. Cap - A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A694 F65, NPT, ASME B16.11, Plug NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A694 F65, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) A694 F65, CL 1500, WN-RTJ, ASME B16.5 (Note1), NACE MR0175/ISO15156 Blind Flange(Note11) A694 F65, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIV / BF1CMIV BF1CJRIV / BF1CJFIV Check Valve CF1CXPV CF1CJWV / CF1CJSV Gate Valve GF1CXV / GF1CMV GF1CJV Globe Valve LF1CXV LF1CJV Needle Valve NF1CXV / NF1CMV - Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB), NACE MR0175/ISO15156 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with Bolt/Nuts yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 20” 24” SCH140 SCH140 166 117. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F1CF3N Piping Class: To be specified High Strength Carbon Steel NACE MR0175/ISO15156 ASME B16.5 Pressure Class Material NDT Refer to Specification of Piping Inspection Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 1/2" Pipe THK XXS Material 3/4” 1" 1 1/2” API 5L X65 PSL2 SMLS, PE, ASME B36.10M,NACE MR0175/ISO15156 Fittings A694 F65, CL 9000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156. Sockolet - Coupling Cap Plug 3" A694 F65, BW, MSS-SP-97, NACE MR0175/ISO15156. (Note1) 4" 3mm Design code ASME B31.3 6" SCH160 8” 10” 12” SCH140 14”-24” SCH140 API 5L X65 PSL2 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, Weldolet 2" SCH160 1500 Corrosion Allowance: Design Temperature (℃) Size F1CF3N(Note 3) Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A694 F65, BW, MSS-SP-97, NACE MR0175/ISO15156 A694 F65, CL 9000, SW, ASME B16.11, NACE MR0175/ISO15156. - A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A694 F65, NPT, ASME B16.11, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A694 F65, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) A694 F65, CL 1500, WN-RTJ, ASME B16.5 (Note1), NACE MR0175/ISO15156 Blind Flange(Note11) A694 F65, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIV / BF1CMIV BF1CJRIV / BF1CJFIV Check Valve CF1CXPV CF1CJWV / CF1CJSV Gate Valve GF1CXV / GF1CMV GF1CJV Globe Valve LF1CXV LF1CJV Needle Valve NF1CXV / NF1CMV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB), NACE MR0175/ISO15156 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 167 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 118. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F2CF3N Piping Class: To be specified High Strength Carbon Steel NACE MR0175/ISO15156 ASME B16.5 Pressure Class Material NDT Refer to Specification of Piping Inspection Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 1/2" Pipe THK Material 3/4” 1" 1 1/2” SCH160 API 5L X65 PSL2 SMLS, PE, ASME B36.10M,NACE MR0175/ISO15156 Fittings A694 F65, CL 9000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156. Cap Plug 4" 3mm Design code ASME B31.3 6" 8” 10” 12” SCH120 14”-24” SCH120 API 5L X65 PSL2 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A694 F65, SW, CL6000,MSS-SP-97, NACE MR0175/ISO15156. Weldolet Coupling 3" SCH160 Forged Fittings: Elbow, Tee, Sockolet 2" 1500 Corrosion Allowance: Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Size F2CF3N(Note 3) A694 F65, BW, MSS-SP-97, NACE MR0175/ISO15156 A694 F65, CL 9000, SW, ASME B16.11, NACE MR0175/ISO15156. - A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A694 F65, NPT, ASME B16.11, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A694 F65, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) A694 F65, CL 1500, WN-RTJ, ASME B16.5 (Note1), NACE MR0175/ISO15156 Blind Flange(Note11) A694 F65, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIV / BF1CMIV BF1CJRIV / BF1CJFIV Check Valve CF1CXPV CF1CJWV / CF1CJSV Gate Valve GF1CXV / GF1CMV GF1CJV Globe Valve LF1CXV LF1CJV Needle Valve NF1CXV / NF1CMV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB), NACE MR0175/ISO15156 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 168 119. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F0CF6N Material Piping Class: To be specified High Strength Carbon Steel NACE MR0175/ISO15156 ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 Pipe THK Material 1/2" 3/4” 1" 1 1/2” 2" - - - - - API 5L X65 PSL2 SMLS, PE, ASME B36.10M,NACE MR0175/ISO15156 Fittings A694 F65, CL 9000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156. Sockolet - Weldolet Coupling Cap Plug 3" A694 F65, BW, MSS-SP-97, NACE MR0175/ISO15156. (Note1) 4" 6mm Design code ASME B31.3 6" XXS 8” 10” 12” 14”-24” 24 SCH160 SCH160 API 5L X65 PSL2 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, 1500 Corrosion Allowance: Design Temperature (℃) Size F0CF6N(Note 3) Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A694 F65, BW, MSS-SP-97, NACE MR0175/ISO15156 A694 F65, CL 9000, SW, ASME B16.11, NACE MR0175/ISO15156. - A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A694 F65, NPT, ASME B16.11, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A694 F65, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) A694 F65, CL 1500, WN-RTJ, ASME B16.5 (Note1), NACE MR0175/ISO15156 Blind Flange(Note11) A694 F65, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIQV / BF1CMIQV BF1CJRIQV / BF1CJFIQV Check Valve CF1CXPQV CF1CJWQV / CF1CJSQV Gate Valve GF1CXQV / GF1CMQV GF1CJQV Globe Valve LF1CXQV LF1CJQV Needle Valve NF1CXQV / NF1CMQV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB), NACE MR0175/ISO15156 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 169 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 120. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F1CF6N To be specified High Strength Carbon Steel NACE MR0175/ISO15156 Material NDT Refer to Specification of Piping Inspection Piping Class: F1CF6N(Note 3) ASME B16.5 Pressure Class 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 Size Pipe THK Material 1/2" 3/4” 1" 1 1/2” 2" - - - - XXS API 5L X65 PSL2 SMLS, PE, ASME B36.10M,NACE MR0175/ISO15156 Fittings A694 F65, CL 9000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156. Sockolet - Coupling Cap Plug A694 F65, BW, MSS-SP-97, NACE MR0175/ISO15156. (Note1) 4" Design code ASME B31.3 6" 8” 10” XXS 12” 14” SCH160 16”-24” SCH140 API 5L X65 PSL2 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, Weldolet 3" 1500 Corrosion Allowance: Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A694 F65, BW, MSS-SP-97, NACE MR0175/ISO15156 A694 F65, CL 9000, SW, ASME B16.11, NACE MR0175/ISO15156. - A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A694 F65, NPT, ASME B16.11, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A694 F65, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) A694 F65, CL 1500, WN-RTJ, ASME B16.5 (Note1), NACE MR0175/ISO15156 Blind Flange(Note11) A694 F65, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIQV / BF1CMIQV BF1CJRIQV / BF1CJFIQV Check Valve CF1CXPQV CF1CJWQV / CF1CJSQV Gate Valve GF1CXQV / GF1CMQV GF1CJQV Globe Valve LF1CXQV LF1CJQV Needle Valve NF1CXQV / NF1CMQV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB), NACE MR0175/ISO15156 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 170 121. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F2CF6N Piping Class: To be specified High Strength Carbon Steel NACE MR0175/ISO15156 Material NDT Refer to Specification of Piping Inspection F2CF6N(Note 3) ASME B16.5 Pressure Class 1500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 Size Pipe THK Material 1/2" 3/4” 1" 1 1/2” 2" - - - XXS XXS API 5L X65 PSL2 SMLS, PE, ASME B36.10M,NACE MR0175/ISO15156 Fittings A694 F65, CL 9000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156. Sockolet - Coupling Cap Plug A694 F65, BW, MSS-SP-97, NACE MR0175/ISO15156. (Note1) 4" ASME B31.3 6" XXS 8” 10” 12” SCH160 14”-24” SCH120 API 5L X65 PSL2 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, Weldolet 3" Design code Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A694 F65, BW, MSS-SP-97, NACE MR0175/ISO15156 A694 F65, CL 9000, SW, ASME B16.11, NACE MR0175/ISO15156. - A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A694 F65, NPT, ASME B16.11, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A694 F65, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) A694 F65, CL 1500, WN-RTJ, ASME B16.5 (Note1), NACE MR0175/ISO15156 Blind Flange(Note11) A694 F65, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIQV / BF1CMIQV BF1CJRIQV / BF1CJFIQV Check Valve CF1CXPQV CF1CJWQV / CF1CJSQV Gate Valve GF1CXQV / GF1CMQV GF1CJQV Globe Valve LF1CXQV LF1CJQV Needle Valve NF1CXQV / NF1CMQV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB), NACE MR0175/ISO15156 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 171 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 122. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F0CF3Z Piping Class: To be specified High Strength Carbon Steel Material NDT Refer to Specification of Piping Inspection F0CF3Z(Note 3) ASME B16.5 Pressure Class 1500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 Size 1/2" 3/4” 1" 1 1/2” 2" Pipe THK XXS XXS XXS XXS XXS API 5L X65 PSL2 SMLS, PE, ASME Material B36.10M Fittings 3" A694 F65, CL 9000, SW, ASME Reducer B16.11. Sockolet - Weldolet A694 F65, BW, MSS-SP-97 (Note1) ASME B31.3 6" 8” 10” 12” 14” SCH160 16” SCH160 API 5L X65 PSL2 SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, 4" Design code Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9 A694 F65, BW, MSS-SP-97 A694 F65, CL 9000, SW, ASME Coupling B16.11 Cap - Plug A694 F65, NPT, ASME B16.11 A860 WPHY 65, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A694 F65, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) A694 F65, CL 1500, WN-RTJ, ASME B16.5 (Note1) Blind Flange(Note11) Valves(Note11) A694 F65, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXI / BF1CMI BF1CJRI / BF1CJFI Check Valve CF1CXP CF1CJW / CF1CJS Gate Valve GF1CX / GF1CM GF1CJ Globe Valve LF1CX LF1CJ Needle Valve NF1CX / NF1CM - Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 20” 24” SCH140 SCH140 172 18” 20”-30” Note 7 123. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F1CF3Z Piping Class: To be specified High Strength Carbon Steel Material NDT Refer to Specification of Piping Inspection F1CF3Z(Note 3) ASME B16.5 Pressure Class 1500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 Size 1/2" Pipe THK XXS Material 3/4” 1" 1 1/2” API 5L X65 PSL2 SMLS, PE, ASME B36.10M Fittings 3" A694 F65, CL 9000, SW, ASME Reducer B16.11. Sockolet - Weldolet A694 F65, BW, MSS-SP-97 (Note1) 4" ASME B31.3 6" 8” SCH160 10” 12” SCH140 14”_24” SCH140 API 5L X65 PSL2 SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, Coupling 2" SCH160 Design code Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9 A694 F65, BW, MSS-SP-97 A694 F65, CL 9000, SW, ASME B16.11 Cap - A860 WPHY 65, BW, ASME B16.9 Plug A694 F65, NPT, ASME B16.11 Spectacle Blind, Spacer & Blanks A694 F65, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) A694 F65, CL 1500, WN-RTJ, ASME B16.5 (Note1) Blind Flange(Note11) Valves(Note11) A694 F65, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 BF1CXI / BF1CMI BF1CJRI / BF1CJFI Check Valve CF1CXP CF1CJW / CF1CJS Gate Valve GF1CX / GF1CM GF1CJ Globe Valve LF1CX LF1CJ Needle Valve NF1CX / NF1CM - Ball Valve Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. 173 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 124. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F2CF3Z Piping Class: To be specified High Strength Carbon Steel Material NDT Refer to Specification of Piping Inspection F2CF3Z(Note 3) ASME B16.5 Pressure Class 1500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 Size 1/2" 3/4” Pipe THK Material 1" 1 1/2” API 5L X65 PSL2 SMLS, PE, ASME B36.10M Fittings 3" SCH160 A694 F65, CL 9000, SW, ASME Reducer B16.11 Sockolet A694 F65, SW,CL6000, MSS-SP-97 Weldolet - 4" ASME B31.3 6" 8” 10” 12” SCH120 Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9 A694 F65, BW, MSS-SP-97 A694 F65, CL 9000, SW, ASME B16.11 Cap - Plug A694 F65, NPT, ASME B16.11 A860 WPHY 65, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A694 F65, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) A694 F65, CL 1500, WN-RTJ, ASME B16.5 (Note1) Blind Flange(Note11) Valves(Note11) A694 F65, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXI / BF1CMI BF1CJRI / BF1CJFI Check Valve CF1CXP CF1CJW / CF1CJS Gate Valve GF1CX / GF1CM GF1CJ Globe Valve LF1CX LF1CJ Needle Valve NF1CX / NF1CM - Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. 174 14”-24” SCH120 API 5L X65 PSL2 SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, Coupling 2" SCH160 Design code 125. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F0CF6Z Piping Class: To be specified High Strength Carbon Steel Material NDT Refer to Specification of Piping Inspection F0CF6Z(Note 3) ASME B16.5 Pressure Class 1500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 Size Pipe THK Material 1/2" 3/4” 1" 1 1/2” 2" - - - - 12 API 5L X65 PSL2 SMLS, PE, ASME B36.10M Fittings A694 F65, CL 9000, SW, ASME Reducer B16.11 Sockolet - Weldolet A694 F65, BW, MSS-SP-97 (Note1) 4" ASME B31.3 6" XXS 8” 10” 12” 14”-24” 24 SCH160 SCH160 API 5L X65 PSL2 SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, Coupling 3" Design code Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9 A694 F65, BW, MSS-SP-97 A694 F65, CL 9000, SW, ASME B16.11 Cap - A860 WPHY 65, BW, ASME B16.9 Plug A694 F65, NPT, ASME B16.11 Spectacle Blind, Spacer & Blanks A694 F65, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) A694 F65, CL 1500, WN-RTJ, ASME B16.5 (Note1) Blind Flange(Note11) A694 F65, CL 1500, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIQ / BF1CMIQ BF1CJRIQ / BF1CJFIQ Check Valve CF1CXPQ CF1CJWQ / CF1CJSQ Gate Valve GF1CXQ / GF1CMQ GF1CJQ Globe Valve LF1CXQ LF1CJQ Needle Valve NF1CXQ / NF1CMQ - Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. 175 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 126. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F1CF6Z Piping Class: To be specified High Strength Carbon Steel Material NDT Refer to Specification of Piping Inspection F1CF6Z(Note 3) ASME B16.5 Pressure Class 1500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 Size Pipe THK Material 1/2" 3/4” 1" 1 1/2” 2" - - - - XXS API 5L X65 PSL2 SMLS, PE, ASME B36.10M Fittings A694 F65, CL 9000, SW, ASME Reducer B16.11 Sockolet - Weldolet A694 F65, BW, MSS-SP-97 (Note1) 4" ASME B31.3 6" 8” 10” XXS 12” Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9 A694 F65, BW, MSS-SP-97 A694 F65, CL 9000, SW, ASME B16.11 Cap - Plug A694 F65, NPT, ASME B16.11 A860 WPHY 65, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A694 F65, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) A694 F65, CL 1500, WN-RTJ, ASME B16.5 (Note1) Blind Flange(Note11) A694 F65, CL 1500, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIQ / BF1CMIQ BF1CJRIQ / BF1CJFIQ Check Valve CF1CXPQ CF1CJWQ / CF1CJSQ Gate Valve GF1CXQ / GF1CMQ GF1CJQ Globe Valve LF1CXQ LF1CJQ Needle Valve NF1CXQ / NF1CMQ - Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. 176 14” SCH160 API 5L X65 PSL2 SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, Coupling 3" Design code 16”-24 SCH140 127. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F2CF6Z Piping Class: To be specified High Strength Carbon Steel Material NDT Refer to Specification of Piping Inspection F2CF6Z(Note 3) ASME B16.5 Pressure Class 1500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25530 25060 23300 22540 Size Pipe THK Material 1/2" 3/4” 1" 1 1/2” - - - XXS API 5L X65 PSL2 SMLS, PE, ASME B36.10M Fittings 3" 4" A694 F65, CL 9000, SW, ASME Reducer B16.11 Sockolet - Weldolet A694 F65, BW, MSS-SP-97 (Note1) ASME B31.3 6" XXS 8” 10” 12” SCH160 14”-24” SCH120 API 5L X65 PSL2 SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, Coupling 2" Design code Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9 A694 F65, BW, MSS-SP-97 A694 F65, CL 9000, SW, ASME B16.11 Cap - A860 WPHY 65, BW, ASME B16.9 Plug A694 F65, NPT, ASME B16.11 Spectacle Blind, Spacer & Blanks A694 F65, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) A694 F65, CL 1500, WN-RTJ, ASME B16.5 (Note1) Blind Flange(Note11) A694 F65, CL 1500, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF1CXIQ / BF1CMIQ BF1CJRIQ / BF1CJFIQ Check Valve CF1CXPQ CF1CJWQ / CF1CJSQ Gate Valve GF1CXQ / GF1CMQ GF1CJQ Globe Valve LF1CXQ LF1CJQ Needle Valve NF1CXQ / NF1CMQ - Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. 177 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 128. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F0AA3L To be specified Low Temperature Carbon Steel Material NDT Piping Class: F0AA3L ASME B16.5 Pressure Class 1500 Refer to Specification of Piping Inspection Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 25530 25530 25060 23300 22540 8” 10”-12” Size 1/2”-1 1/2” Pipe THK Material XXS A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings A350 LF3 CL2, CL 9000, SW, ASME Reducer B16.11 Sockolet Coupling 14” 18” 20”-24” SCH160 SCH160 A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, BW, MSS-SP-97 A350 LF3 CL2, CL 9000, SW, ASME - B16.11 - 16” Butt Weld Fittings: (Note1) A350 LF3 CL2, BW, MSS-SP-97 Cap Plug ASME B31.3 XXS 24mm SCH160 37mm 42mm A333 Gr. 3 SMLS, BE, ASME B36.10M Forged Fittings: Elbow, Tee, Weldolet 2”-6” Design code A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, NPT, ASME B16.11 - Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) Ball Valve A350 LF3 CL2, CL 1500, SW-RTJ, ASME B16.5 A350 LF3 CL2, CL 1500 WN-RTJ, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 BF9CXI / BF9CMI BF9CJRI / BF9CJFI Butterfly Valve - - Check Valve CF9CXP CF9CJW / CF9CJS Gate Valve GF9CX / GF9CM GF9CJ Globe Valve LF9CX LF9CJ Needle Valve NF9CX / NF9CM - Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160BHN) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 178 129. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F1AA3L To be specified Low Temperature Carbon Steel Material NDT Piping Class: F1AA3L ASME B16.5 Pressure Class 1500 Corrosion Allowance: 3mm Refer to Specification of Piping Inspection Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 22100 22100 22100 Size 1/2”-1 1/2” Pipe THK XXS Material A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings A350 LF3 CL2, CL 9000, SW, ASME Reducer B16.11 Sockolet Weldolet Coupling 2”-3” 4”-18” SCH160 Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, BW, MSS-SP-97 A350 LF3 CL2, CL 9000, SW, ASME - B16.11 - 20”-24” XXS SCH160 A333 Gr. 3 SMLS, BE, ASME B36.10M A350 LF3 CL2, BW, MSS-SP-97 Cap Plug ASME B31.3 Forged Fittings: Elbow, Tee, Design code A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, NPT, ASME B16.11 - Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) Ball Valve A350 LF3 CL2, CL 1500, SW-RTJ, ASME B16.5 A350 LF3 CL2, CL 1500 WN-RTJ, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 BF9CXI / BF9CMI BF9CJRI / BF9CJFI Butterfly Valve - - Check Valve CF9CXP CF9CJW / CF9CJS Gate Valve GF9CX / GF9CM GF9CJ Globe Valve LF9CX LF9CJ Needle Valve NF9CX / NF9CM - Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160BHN) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 179 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 130. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F2AA3L To be specified Low Temperature Carbon Steel Material NDT Piping Class: F2AA3L ASME B16.5 Pressure Class 1500 Refer to Specification of Piping Inspection Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 18700 18700 18700 Size 1/2”-1 1/2” Pipe THK XXS Material A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings A350 LF3 CL2, CL 9000, SW, ASME Reducer B16.11 Sockolet A350 LF3 CL2, BW, MSS-SP-97 Pipe Nipple A350 LF3 CL2, PE,L=100mm(Note1) 8”-18” A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, BW, MSS-SP-97 - B16.11 - 20”-24” SCH 140 Butt Weld Fittings: (Note1) A350 LF3 CL2, CL 9000, SW, ASME Cap Plug 2”-6” SCH160 SCH 140 A333 Gr. 3 SMLS, BE, ASME B36.10M - Weldolet Coupling ASME B31.3 Forged Fittings: Elbow, Tee, Design code A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, NPT, ASME B16.11 - Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A350 LF3 CL2, CL 1500, SW-RTJ, ASME B16.5 A350 LF3 CL2, CL 1500 WN-RTJ, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 BF9CXI / BF9CMI BF9CJRI / BF9CJFI - - Check Valve CF9CXP CF9CJW / CF9CJS Gate Valve GF9CX / GF9CM GF9CJ Globe Valve LF9CX LF9CJ Needle Valve NF9CX / NF9CM - Ball Valve Butterfly Valve Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160BHN) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 180 131. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F0AA6L To be specified Low Temperature Carbon Steel Material NDT Refer to Specification of Piping Inspection Piping Class: F0AA6L ASME B16.5 Pressure Class 1500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 25530 25530 25060 23300 22540 Size 1/2” 3/4” 1” 1 1/2” Pipe THK - - - - Material A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings 2” A350 LF3 CL2, CL 9000, SW, ASME Reducer B16.11 Sockolet 4” 6” ASME B31.3 12” 14” 16” 18” 20”-24” 13 XXS 18 23 27 32 37 A333 Gr. 3 SMLS, BE, ASME B36.10M 40 44 49 Forged Fittings: Elbow, Tee, 3” Design code 8” 10” Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9 - Weldolet A350 LF3 CL2, BW, MSS-SP-97 A350 LF3 CL2, BW, MSS-SP-97 A350 LF3 CL2, CL 9000, SW, ASME Coupling - B16.11 Cap - Plug Note7 A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, NPT, ASME B16.11 - Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) A350 LF3 CL2, CL 1500, SW-RTJ, ASME B16.5 A350 LF3 CL2, CL 1500 WN-RTJ, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 1500, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF9CXIQ / BF9CMIQ BF9CJRIQ / BF9CJFIQ Butterfly Valve - - Check Valve CF9CXPQ CF9CJWQ / CF9CJSQ Gate Valve GF9CXQ / GF9CMQ GF9CJQ Globe Valve LF9CXQ LF9CJQ Needle Valve NF9CXQ / NF9CMQ - Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 20” 24” 54mm 63mm 181 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 132. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F1AA6L Piping Class: To be specified Low Temperature Carbon Steel Material NDT Refer to Specification of Piping Inspection F1AA6L ASME B16.5 Pressure Class 1500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 22100 22100 22100 Size 1/2” 3/4” 1” 1 1/2” Pipe THK - - - - Material A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings 2” ASME B31.3 12” 14” 16” 18” 20”-24” 13 XXS 27 31 36 A333 Gr. 3 SMLS, BE, ASME B36.10M 3” 39 43 47 Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 9000, SW, ASME Reducer B16.11 Sockolet 4” 6” 8” 10” A350 LF3 CL2, BW, MSS-SP-97 A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, BW, MSS-SP-97 A350 LF3 CL2, CL 9000, SW, ASME Coupling - B16.11 Cap - Plug Note7 Butt Weld Fittings: (Note1) - Weldolet Design code A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, NPT, ASME B16.11 - Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) A350 LF3 CL2, CL 1500, SW-RTJ, ASME B16.5 A350 LF3 CL2, CL 1500 WN-RTJ, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 1500, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF9CXIQ / BF9CMIQ BF9CJRIQ / BF9CJFIQ Butterfly Valve - - Check Valve CF9CXPQ CF9CJWQ / CF9CJSQ Gate Valve GF9CXQ / GF9CMQ GF9CJQ Globe Valve LF9CXQ LF9CJQ Needle Valve NF9CXQ / NF9CMQ - Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 20” 24” 52mm 61mm 182 133. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F2AA6L To be specified Low Temperature Carbon Steel Material NDT Piping Class: F2AA6L ASME B16.5 Pressure Class 1500 Corrosion Allowance: 6mm Refer to Specification of Piping Inspection Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 18700 18700 18700 Size 1/2” 3/4” 1” 1 1/2” Pipe THK - - - - Material A333 Gr. 3 SMLS, PE, ASME B36.10M Fittings A350 LF3 CL2, CL 9000, SW, ASME Reducer B16.11 Sockolet A350 LF3 CL2, BW, MSS-SP-97 Pipe Nipple A350 LF3 CL2, PE,L=100mm(Note1) 3” 4” 6” 8” 10”-24” A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, BW, MSS-SP-97 - B16.11 - SCH160 Butt Weld Fittings: (Note1) A350 LF3 CL2, CL 9000, SW, ASME Cap Plug 2” 13 XXS XXS XXS 24 A333 Gr. 3 SMLS, BE, ASME B36.10M - Weldolet Coupling ASME B31.3 Forged Fittings: Elbow, Tee, Design code A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, NPT, ASME B16.11 - Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) A350 LF3 CL2, CL 1500, SW-RTJ, ASME B16.5 A350 LF3 CL2, CL 1500 WN-RTJ, ASME B16.5 (Note1) ASTM A350 LF3 CL2, CL 1500, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF9CXIQ / BF9CMIQ BF9CJRIQ / BF9CJFIQ Butterfly Valve - - Check Valve CF9CXPQ CF9CJWQ / CF9CJSQ Gate Valve GF9CXQ / GF9CMQ GF9CJQ Globe Valve LF9CXQ LF9CJQ Needle Valve NF9CXQ / NF9CMQ - Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 183 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 134. Service PIPING SYSTEM SPECIFICATIONS F0AA3O To be specified Low Temperature Carbon Steel(NACE MR0175/ISO15156) Material NDT ATTACHMENT B Refer to Specification of Piping Inspection Piping Class: F0AA3O ASME B16.5 Pressure Class 1500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 25530 25530 25060 23300 22540 Size 1/2”-1 1/2” Pipe THK Material Fittings XXS A333 Gr. 3 SMLS, PE, ASME B36.10M, NACE MR0175/ISO15156 A350 LF3 CL2, CL 9000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 Sockolet Coupling ASME B31.3 10”-12” 14” 16” 18” 20”-24” SCH 160 37mm 42mm SCH 160 SCH 160 A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, CL 9000, SW, ASME - B16.11, NACE MR0175/ISO15156 Cap Plug 8” XXS 24mm Forged Fittings: Elbow, Tee, Weldolet 2”-6” - Design code A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, NPT, ASME B16.11, NACE - MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) Blind Flange(Note11) A350 LF3 CL2, CL 1500, SW-RTJ, ASME A350 LF3 CL2, CL 1500 B16.5, NACE MR0175/ISO15156 MR0175/ISO15156 WN-RTJ, ASME B16.5 (Note1) , NACE ASTM A350 LF3 CL2, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF9CXIV / BF9CMIV BF9CJRIV / BF9CJFIV Butterfly Valve - - Check Valve CF9CXPV CF9CJWV / CF9CJSV Gate Valve GF9CX / GF9CMV GF9CJV Globe Valve LF9CXV LF9CJV Needle Valve NF9CXV / NF9CMV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, NACE MR0175/ISO15156 ,ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 184 135. Service ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F1AA3O To be specified Low Temperature Carbon Steel(NACE MR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection Piping Class: F1AA3O ASME B16.5 Pressure Class 1500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 22100 22100 22100 Size Pipe THK Material Fittings 2”-3” 4”-18” 20” -24” XXS XXS SCH160 SCH160 A333 Gr. 3 SMLS, PE, ASME B36.10M, NACE MR0175/ISO15156 Reducer B16.11, NACE MR0175/ISO15156 Sockolet Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, CL 9000, SW, ASME - B16.11, NACE MR0175/ISO15156 Cap Plug A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: A350 LF3 CL2, CL 9000, SW, ASME Coupling ASME B31.3 1/2”-1 1/2” Elbow, Tee, Weldolet Design code - A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, NPT, ASME B16.11, - NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) Blind Flange(Note11) A350 LF3 CL2, CL 1500, SW-RTJ, ASME A350 LF3 CL2, CL 1500 B16.5, NACE MR0175/ISO15156 WN-RTJ, ASME B16.5 (Note1) , NACE MR0175/ISO15156 ASTM A350 LF3 CL2, CL 1500, RTJ, ASME B16.5 , NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF9CXIV / BF9CMIV BF9CJRIV / BF9CJFIV Butterfly Valve - - Check Valve CF9CXPV CF9CJWV / CF9CJSV Gate Valve GF9CXV / GF9CMV GF9CJV Globe Valve LF9CXV LF9CJV Needle Valve NF9CXV / NF9CMV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, NACE MR0175/ISO15156 , ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 185 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 136. Service ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F2AA3O To be specified Low Temperature Carbon Steel(NACE MR0175/ISO15156) Material NDT Piping Class: Refer to Specification of Piping Inspection F2AA3O ASME B16.5 Pressure Class Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 18700 18700 18700 Size Pipe THK Material Fittings 2”-6” 8”-18” 20”-24” SCH160 SCH 140 SCH 140 A333 Gr. 3 SMLS, PE, ASME B36.10M, NACE MR0175/ISO15156 B16.11, NACE MR0175/ISO15156 Sockolet Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, PE,L=100mm(Note1) , - NACE MR0175/ISO15156 A350 LF3 CL2, CL 9000, SW, ASME - B16.11, NACE MR0175/ISO15156 Cap Plug A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: Reducer Coupling ASME B31.3 XXS A350 LF3 CL2, CL 9000, SW, ASME Pipe Nipple 3mm Design code 1/2”-1 1/2” Elbow, Tee, Weldolet 1500 Corrosion Allowance: - A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, NPT, ASME B16.11, - NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) Blind Flange(Note11) A350 LF3 CL2, CL 1500, SW-RTJ, ASME A350 LF3 CL2, CL 1500 B16.5, NACE MR0175/ISO15156 WN-RTJ, ASME B16.5 (Note1) , NACE MR0175/ISO15156 ASTM A350 LF3 CL2, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF9CXIV / BF9CMIV BF9CJRIV / BF9CJFIV - - Check Valve CF9CXPV CF9CJWV / CF9CJSV Gate Valve GF9CXV / GF9CMV GF9CJV Globe Valve LF9CXV LF9CJV Needle Valve NF9CXV / NF9CMV - Butterfly Valve Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, NACE MR0175/ISO15156 , ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 186 137. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F0AA6O To be specified Low Temperature Carbon Steel(NACE MR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection Piping Class: F0AA6O ASME B16.5 Pressure Class 1500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 25530 25530 25060 23300 22540 Design code ASME B31.3 Size 1/2” 3/4” 1” 1 1/2” 2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20”-24” Pipe THK - - - - 13 XXS 18 23 27 32 37 40 44 49 A333 Gr. 3 SMLS, PE, ASME B36.10M, Material NACE MR0175/ISO15156 Fittings A333 Gr. 3 SMLS, BE, ASME B36.10M , NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, A350 LF3 CL2, CL 9000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 Sockolet Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE Weldolet MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, CL 9000, SW, ASME Coupling - B16.11, NACE MR0175/ISO15156 Cap - A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, NPT, ASME B16.11, NACE Plug Note7 - MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) Blind Flange(Note11) A350 LF3 CL2, CL 1500, SW-RTJ, ASME A350 LF3 CL2, CL 1500 B16.5, NACE MR0175/ISO15156 WN-RTJ, ASME B16.5 (Note1) , NACE MR0175/ISO15156 ASTM A350 LF3 CL2, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF9CXIQV / BF9CMIQV BF9CJRIQV / BF9CJFIQV Butterfly Valve - - Check Valve CF9CXPQV CF9CJWQV / CF9CJSQV Gate Valve GF9CXQV / GF9CMQV GF9CJQV Globe Valve LF9CXQV LF9CJQV Needle Valve NF9CXQV / NF9CMQV - Gasket 316L Octagonal Ring, CL 1500, NACE MR0175/ISO15156 , ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 20” 24” 54mm 63mm 187 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 138. Service ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F1AA6O Piping Class: To be specified Low Temperature Carbon Steel(NACE MR0175/ISO15156) Material NDT F1AA6O ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 1500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 22100 22100 22100 Size 1/2” 3/4” 1” 1 1/2” 2” Pipe THK - - - - 13 A333 Gr. 3 SMLS, PE, ASME B36.10M, Material NACE MR0175/ISO15156 Fittings ASME B31.3 3” 4” A350 LF3 CL2, CL 9000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 Sockolet 6” XXS 8” 10” 12” 14” 16” 18” 20”-24” 27 31 36 39 43 47 Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE Weldolet MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, CL 9000, SW, ASME Coupling - B16.11, NACE MR0175/ISO15156 Cap - A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, NPT, ASME B16.11, Plug Note7 A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, Design code - NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) Blind Flange(Note11) A350 LF3 CL2, CL 1500, SW-RTJ, A350 LF3 CL2, CL 1500 WN-RTJ, ASME B16.5 (Note1) , NACE ASME B16.5, NACE MR0175/ISO15156 MR0175/ISO15156 ASTM A350 LF3 CL2, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF9CXIQV / BF9CMIQV BF9CJRIQV / BF9CJFIQV Butterfly Valve - - Check Valve CF9CXPQV CF9CJWQV / CF9CJSQV Gate Valve GF9CXQV / GF9CMQV GF9CJQV Globe Valve LF9CXQV LF9CJQV Needle Valve NF9CXQV / NF9CMQV - Gasket 316L Octagonal Ring, CL 1500, NACE MR0175/ISO15156 , ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. (7) Below table is just for reference. The wall thickness shall be calculated as per design condition of specified project. 20” 24” 52mm 61mm 188 139. Service Material ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F2AA6O Piping Class: To be specified Low Temperature Carbon Steel(NACE MR0175/ISO15156) NDT Refer to Specification of Piping Inspection F2AA6O ASME B16.5 Pressure Class 1500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 18700 18700 18700 Size 1/2” 3/4” 1” 1 1/2” 2” 3”-6” 8” 10”-24” Pipe THK - - - - 13 XXS 24 SCH160 Material Fittings A333 Gr. 3 SMLS, PE, ASME B36.10M, NACE MR0175/ISO15156 A350 LF3 CL2, CL 9000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 Sockolet Pipe Nipple Coupling Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156 A350 LF3 CL2, PE,L=100mm(Note1) , - NACE MR0175/ISO15156 A350 LF3 CL2, CL 9000, SW, ASME - B16.11, NACE MR0175/ISO15156 Cap Plug A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 Forged Fittings: Elbow, Tee, Weldolet ASME B31.3 - A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156 A350 LF3 CL2, NPT, ASME B16.11, - NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 1500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) Blind Flange(Note11) A350 LF3 CL2, CL 1500, SW-RTJ, A350 LF3 CL2, CL 1500 WN-RTJ, ASME B16.5 (Note1) , NACE ASME B16.5, NACE MR0175/ISO15156 MR0175/ISO15156 ASTM A350 LF3 CL2, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF9CXIQV / BF9CMIQV BF9CJRIQV / BF9CJFIQV Butterfly Valve - - Check Valve CF9CXPQV CF9CJWQV / CF9CJSQV Gate Valve GF9CXQV / GF9CMQV GF9CJQV Globe Valve LF9CXQV LF9CJQV Needle Valve NF9CXQV / NF9CMQV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, NACE MR0175/ISO15156 , ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 189 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 140. ATTACHMENT B Service Material NDT PIPING SYSTEM SPECIFICATIONS F0SA0L To be specified Piping Class: F0SA0L Stainless Steel ASME B16.5 Pressure Class 1500 Refer to Specification of Piping Inspection Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 20680 20680 20010 17390 15700 Design code ASME B31.3 Size 1/2"-1" 1 1/2” 2”-18” 20”-24” Pipe THK SCH 80S SCH160 SCH160 SCH160 Material Fittings Elbow, Tee, Reducer Sockolet A312 TP316L SMLS, PE, ASME B36.19M A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) Forged Fittings: A182 F316L, CL 6000, SW, ASME B16.11 Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL 6000, SW, MSS-SP-97 Weldolet - Coupling A182 F316L, CL 6000, SW, ASME B16.11 Cap A182 F316L, CL 6000, NPT, ASME B16.11 Plug A182 F316L, NPT, ASME B16.11 A182 F316L, BW, MSS-SP-97 A403 Gr. WP 316L, BW, ASME B16.9 - Spectacle Blind, Spacer & A182 F316L, CL 1500, RTJ, ASME B16.48 Blanks(Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F316L, CL 1500, SW-RTJ, ASME B16.5 A182 F316L, CL 1500, WN-RTJ, ASME B16.5 (Note1) A182 F316L, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF2CXZI/BF2CMZI BF2CJRZI / BF2CJFZI Check Valve CF2CXPZ CF2CJWZ / CF2CJSZ Gate Valve GF2CXZ / GF2CMZ GF2CJZ Globe Valve LF2CXZ LF2CJZ Needle Valve NF2CXZ / NF2CMZ Gasket Bolt/Nuts 316L Octagonal Ring, CL1500, ASME B16.20 (Max. hardness is 160BHN) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test for materials of this spec. shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 190 141. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F1SA0L Service To be specified Piping Class: F1SA0L Material Stainless Steel ASME B16.5 Pressure Class 1500 NDT Refer to Specification of Piping Inspection Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 17900 17900 15700 Size 1/2"-1" 1 1/2” Pipe THK SCH 80S SCH 80S Material Fittings Elbow, Tee, Reducer Sockolet Weldolet A312 TP316L SMLS, PE, ASME B36.19M ASME B31.3 2”-3” 4”-18” 20”-24” SCH80S SCH160 SCH160 A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) Forged Fittings: A182 F316L, CL 6000, SW, ASME B16.11 Design code Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL 6000, SW, MSS-SP-97 - Coupling A182 F316L, CL 6000, SW, ASME B16.11 Cap A182 F316L, CL 6000, NPT, ASME B16.11 Plug A182 F316L, NPT, ASME B16.11 A182 F316L, BW, MSS-SP-97 A403 Gr. WP 316L, BW, ASME B16.9 - Spectacle Blind, Spacer & Blanks A182 F316L, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F316L, CL 1500, SW-RTJ, ASME B16.5 A182 F316L, CL 1500, WN-RTJ, ASME B16.5 (Note1) A182 F316L, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF2CXZI/BF2CMZI BF2CJRZI / BF2CJFZI Check Valve CF2CXPZ CF2CJWZ / CF2CJSZ Gate Valve GF2CXZ / GF2CMZ GF2CJZ Globe Valve LF2CXZ LF2CJZ Needle Valve Gasket Bolt/Nuts NF2CXZ / NF2CMZ 316L Octagonal Ring, CL1500, ASME B16.20 (Max. hardness is 160BHN) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test for materials of this spec. shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 191 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 142. ATTACHMENT B Service Material NDT PIPING SYSTEM SPECIFICATIONS F2SA0L To be specified Piping Class: F2SA0L Stainless Steel ASME B16.5 Pressure Class 1500 Refer to Specification of Piping Inspection Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 15100 15100 15100 Design code ASME B31.3 Size 1/2"-1 1/2” 2”-4” 6”-18” 20”-24” Pipe THK SCH 80S SCH80S SCH 120 SCH 120 Material Fittings Elbow, Tee, Reducer Sockolet Weldolet A312 TP316L SMLS, PE, ASME B36.19M A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) Forged Fittings: A182 F316L, CL 6000, SW, ASME B16.11 Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL 6000, SW, MSS-SP-97 - Coupling A182 F316L, CL 6000, SW, ASME B16.11 Cap A182 F316L, CL 6000, NPT, ASME B16.11 Plug A182 F316L, NPT, ASME B16.11 A182 F316L, BW, MSS-SP-97 A403 Gr. WP 316L, BW, ASME B16.9 - Spectacle Blind, Spacer & Blanks A182 F316L, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) A182 F316L, CL 1500, SW-RTJ, ASME B16.5 A182 F316L, CL 1500, WN-RTJ, ASME B16.5 (Note1) Blind Flange(Note11) A182 F316L, CL 1500, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF2CXZI/BF2CMZI BF2CJRZI / BF2CJFZI Check Valve CF2CXPZ CF2CJWZ / CF2CJSZ Gate Valve GF2CXZ / GF2CMZ GF2CJZ Globe Valve LF2CXZ LF2CJZ Needle Valve NF2CXZ / NF2CMZ Gasket Bolt/Nuts 316L Octagonal Ring, CL1500, ASME B16.20 (Max. hardness is 160BHN) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test for materials of this spec. shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 192 143. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F0SA0N Service To be specified Material Stainless Steel (NACE MR0175/ISO15156) NDT Piping Class: Refer to Specification of Piping Inspection F0SA0N (note3) ASME B16.5 Pressure Class 1500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 50 100 150 Design Pressure (kPaG) 20680 20680 20010 Size 1/2"-1" 1 1/2” Pipe THK SCH 80S SCH160 Material Fittings A312 TP316L SMLS, PE, ASME B36.19M, NACE MR0175/ISO15156. 17390 2”-18” 20”-24” SCH160 SCH160 A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) , NACE MR0175/ISO15156. Forged Fittings: Butt Weld Fittings: (Note1) A182 F316L, CL 6000, SW, ASME B16.11, A403 Reducer NACE MR0175/ISO15156. MR0175/ISO15156. Coupling Cap Plug Gr. WP 316L, A182 F316L, CL 6000, SW, MSS-SP-97, NACE - BW, ASME B16.9, NACE - MR0175/ISO15156. Weldolet ASME B31.3 15700 Elbow, Tee, Sockolet Design code A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. A182 F316L, CL 6000, SW, ASME B16.11, - NACE MR0175/ISO15156. A182 F316L, CL 6000, NPT, ASME B16.11, A403 NACE MR0175/ISO15156. MR0175/ISO15156. Gr. WP 316L, A182 F316L, NPT, ASME B16.11, NACE BW, ASME B16.9, NACE - MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A182 F316L, CL 1500, RF, ASME B16.48, NACE MR0175/ISO15156. (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F316L, CL 1500, SW-RTJ, ASME B16.5, A182 F316L, CL 1500, WN-RTJ, ASME B16.5 (Note1) , NACE NACE MR0175/ISO15156. MR0175/ISO15156. A182 F316L, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156. ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF2CXI/BF2CMIV BF2CJRIV / BF2CJFIV Check Valve CF2CXPV CF2CJWV / CF2CJSV Gate Valve GF2CXV / GF2CMV GF2CJV Globe Valve LF2CXV LF2CJV Needle Valve Gasket Bolt/Nuts NF2CXV / NF2CMV 316L Octagonal Ring, CL1500, NACE MR0175/ISO15156 , ASME B16.20 (Max. hardness is 160HB) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 193 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 144. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F1SA0N Service To be specified Piping Class: F1SA0N (note3) Material Stainless Steel(NACE MR0175/ISO15156) ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection Corrosion Allowance: 1500 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 17900 15700 Design code ASME B31.3 Design Pressure (kPaG) Size 1/2"-1" 1 1/2” Pipe THK SCH80S SCH80S Material Fittings A312 TP316L SMLS, PE, ASME B36.19M, NACE MR0175/ISO15156. 2”-3” 4”-18” 20”-24” SCH80S SCH160 SCH160 A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) , NACE MR0175/ISO15156. Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A182 F316L, CL 6000, SW, ASME B16.11, A403 Reducer NACE MR0175/ISO15156. MR0175/ISO15156. Sockolet Cap Plug WP 316L, BW, A182 F316L, CL 6000, SW, MSS-SP-97, NACE - ASME B16.9, NACE - MR0175/ISO15156. Weldolet Coupling Gr. A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. A182 F316L, CL 6000, SW, ASME B16.11, - NACE MR0175/ISO15156. A182 F316L, CL 6000, NPT, ASME B16.11, A403 NACE MR0175/ISO15156. MR0175/ISO15156. Gr. WP 316L, BW, A182 F316L, NPT, ASME B16.11, NACE ASME B16.9, NACE - MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A182 F316L, CL 1500, RF, ASME B16.48, NACE MR0175/ISO15156. (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F316L, CL 1500, SW-RTJ, ASME B16.5, A182 F316L, CL 1500, WN-RTJ, ASME B16.5 (Note1) , NACE MR0175/ISO15156. NACE MR0175/ISO15156. A182 F316L, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156. ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF2CXIV/BF2CMIV BF2CJRIV / BF2CJFIV Check Valve CF2CXPV CF2CJWV / CF2CJSV Gate Valve GF2CXV / GF2CMV GF2CJV Globe Valve LF2CXV LF2CJV Needle Valve Gasket Bolt/Nuts NF2CXV / NF2CMV 316L Octagonal Ring, CL1500, NACE MR0175/ISO15156 , ASME B16.20 (Max. hardness is 160HB) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 194 145. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F2SA0N Service To be specified Material Stainless Steel(NACE MR0175/ISO15156) Piping Class: ASME B16.5 Pressure Class F2SA0N (note3) NDT Refer to Specification of Piping Inspection Corrosion Allowance: 1500 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 15100 15100 Size 1/2"-1 1/2” Pipe THK SCH80S Material Fittings A312 TP316L SMLS, PE, ASME B36.19M, NACE MR0175/ISO15156. ASME B31.3 2”-4” 6”-18” 20”-24” SCH80S SCH 120 SCH 120 A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) , NACE MR0175/ISO15156. Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A182 F316L, CL 6000, SW, ASME B16.11, A403 Reducer NACE MR0175/ISO15156. MR0175/ISO15156. Sockolet WP 316L, BW, - ASME B16.9, NACE - MR0175/ISO15156. A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. A182 F316L, CL 6000, SW, ASME B16.11, - NACE MR0175/ISO15156. A403 Cap Plug Gr. A182 F316L, CL 6000, SW, MSS-SP-97, NACE Weldolet Coupling Design code Gr. WP 316L, BW, ASME B16.9, NACE MR0175/ISO15156. A182 F316L, NPT, ASME B16.11, NACE - MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A182 F316L, CL 1500, RF, ASME B16.48, NACE MR0175/ISO15156. (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F316L, CL 1500, SW-RTJ, ASME B16.5, A182 F316L, CL 1500, WN-RTJ, ASME B16.5 (Note1) , NACE MR0175/ISO15156. NACE MR0175/ISO15156. A182 F316L, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156. ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF2CXIV/BF2CMIV BF2CJRIV / BF2CJFIV Check Valve CF2CXPV CF2CJWV / CF2CJSV Gate Valve GF2CXV / GF2CMV GF2CJV Globe Valve LF2CXV LF2CJV Needle Valve Gasket Bolt/Nuts NF2CXV / NF2CMV 316L Octagonal Ring, CL1500, NACE MR0175/ISO15156 , ASME B16.20 (Max. hardness is 160HB) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 195 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 146. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F0SA0O Service To be specified Piping Class: F0SA0O(note3) Material Stainless Steel (NACE MR0175/ISO15156) ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection Corrosion Allowance: 1500 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 20680 20680 20010 17390 15700 Design code ASME B31.3 Size 1/2"-1" 1 1/2” 2”-18” 20”-24” Pipe THK SCH 80S SCH160 SCH160 SCH160 Material Fittings A312 TP316L SMLS, PE, ASME B36.19M, NACE MR0175/ISO15156. A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6), NACE MR0175/ISO15156. Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A182 F316L, CL 6000, SW, ASME B16.11, A403 Reducer NACE MR0175/ISO15156. MR0175/ISO15156. Sockolet Cap Plug WP 316L, A182 F316L, CL 6000, SW, MSS-SP-97, NACE - BW, ASME B16.9, NACE - MR0175/ISO15156. Weldolet Coupling Gr. A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. A182 F316L, CL 6000, SW, ASME B16.11, - NACE MR0175/ISO15156. A182 F316L, CL 6000, NPT, ASME B16.11, A403 NACE MR0175/ISO15156. MR0175/ISO15156. Gr. WP 316L, A182 F316L,NPT, ASME B16.11, NACE BW, ASME B16.9, NACE - MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A182 F316L, CL 1500, RF, ASME B16.48, NACE MR0175/ISO15156. (Note11) Flange(Note11) Blind Flange(Note11) A182 F316L, CL 1500, SW-RTJ, ASME B16.5, A182 F316L, CL 1500, WN-RTJ, ASME B16.5 (Note1), NACE NACE MR0175/ISO15156 MR0175/ISO15156 A182 F316L, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF2CXZIV/BF2CMZIV BF2CJRZIV / BF2CJFZIV Check Valve CF2CXPZV CF2CJWZV / CF2CJSZV Gate Valve GF2CXZV / GF2CMZV GF2CJZV Globe Valve LF2CXZV LF2CJZV Needle Valve NF2CXZV / NF2CMZV Gasket Bolt/Nuts 316L Octagonal Ring, CL1500, , NACE MR0175/ISO15156 ,ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test for materials of this spec. shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 196 147. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F1SA0O Piping Class: To be specified Material Stainless Steel (NACE MR0175/ISO15156) NDT F1SA0O (note3) ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 1500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 17900 17900 15700 Size 1/2"-1" 1 1/2” Pipe THK SCH 80S SCH 80S Material Fittings A312 TP316L SMLS, PE, ASME B36.19M, NACE MR0175/ISO15156. ASME B31.3 2”-3” 4”-18” 20”-24” SCH80S SCH160 SCH160 A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6), NACE MR0175/ISO15156. Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A182 F316L, CL 6000, SW, ASME B16.11, A403 Reducer NACE MR0175/ISO15156. MR0175/ISO15156. Sockolet Cap Plug Gr. WP 316L, A182 F316L, CL 6000, SW, MSS-SP-97, - BW, ASME B16.9, NACE - NACE MR0175/ISO15156. Weldolet Coupling Design code A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. A182 F316L, CL 6000, SW, ASME B16.11, - NACE MR0175/ISO15156. A182 F316L, CL 6000, NPT, ASME B16.11, A403 NACE MR0175/ISO15156. MR0175/ISO15156. Gr. WP 316L, A182 F316L, NPT, ASME B16.11, NACE BW, ASME B16.9, NACE - MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A182 F316L, CL 1500, RF, ASME B16.48, NACE MR0175/ISO15156. (Note11) Flange(Note11) A182 F316L, CL 1500, SW-RTJ, ASME A182 F316L, CL 1500, WN-RTJ, ASME B16.5 (Note1), NACE B16.5, NACE MR0175/ISO15156. MR0175/ISO15156. Blind Flange(Note11) A182 F316L, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156. Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF2CXZIV/BF2CMZIV BF2CJRZIV / BF2CJFZIV Check Valve CF2CXPZV CF2CJWZV / CF2CJSZV Gate Valve GF2CXZV / GF2CMZV GF2CJZV Globe Valve LF2CXZV LF2CJZV Needle Valve Gasket Bolt/Nuts NF2CXZV / NF2CMZV 316L Octagonal Ring, CL1500, , NACE MR0175/ISO15156 ,ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test for materials of this spec. shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 197 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 148. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F2SA0O Service To be specified Piping Class: F2SA0O (note3) Material Stainless Steel (NACE MR0175/ISO15156) ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection Corrosion Allowance: 1500 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 15100 15100 15100 Design code ASME B31.3 Size 1/2"-1 1/2” 2”-4” 6”-18” 20”-24” Pipe THK SCH 80S SCH80S SCH 120 SCH 120 Material Fittings A312 TP316L SMLS, PE, ASME B36.19M, NACE MR0175/ISO15156. A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6), NACE MR0175/ISO15156. Forged Fittings: Butt Weld Fittings: (Note1) Elbow, Tee, A182 F316L, CL 6000, SW, ASME B16.11, A403 Reducer NACE MR0175/ISO15156. MR0175/ISO15156. Sockolet Cap Plug WP 316L, A182 F316L, CL 6000, SW, MSS-SP-97, - BW, ASME B16.9, NACE - NACE MR0175/ISO15156. Weldolet Coupling Gr. A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. A182 F316L, CL 6000, SW, ASME B16.11, - NACE MR0175/ISO15156. A182 F316L, CL 6000, NPT, ASME B16.11, A403 NACE MR0175/ISO15156. MR0175/ISO15156. Gr. WP 316L, A182 F316L, NPT, ASME B16.11, NACE BW, ASME B16.9, NACE - MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A182 F316L, CL 1500, RF, ASME B16.48, NACE MR0175/ISO15156. (Note11) Flange(Note11) A182 F316L, CL 1500, SW-RTJ, ASME A182 F316L, CL 1500, WN-RTJ, ASME B16.5 (Note1), NACE B16.5, NACE MR0175/ISO15156. MR0175/ISO15156. Blind Flange(Note11) A182 F316L, CL 1500, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF2CXZIV/BF2CMZIV BF2CJRZIV / BF2CJFZIV Check Valve CF2CXPZV CF2CJWZV / CF2CJSZV Gate Valve GF2CXZV / GF2CMZV GF2CJZV Globe Valve LF2CXZV LF2CJZV Needle Valve NF2CXZV / NF2CMZV Gasket Bolt/Nuts 316L Octagonal Ring, CL1500, , NACE MR0175/ISO15156 ,ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test for materials of this spec. shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 198 149. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F0SA0Z Service To be specified Piping Class: Material Stainless Steel ASME B16.5 Pressure Class 1500 Corrosion Allowance: 0mm NDT Refer to Specification of Piping Inspection F0SA0Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -29 38 50 100 150 Design Pressure (kPaG) 20680 20680 20010 Size 1/2"-1" 1 1/2” Pipe THK SCH 80S SCH160 Material Fittings Elbow, Tee, Reducer Sockolet A312 TP316L SMLS, PE, ASME B36.19M 17390 ASME B31.3 15700 2”-18” 20”-24” SCH160 SCH160 A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) Forged Fittings: A182 F316L, CL 6000, SW, ASME B16.11 Design code Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL 6000, SW, MSS-SP-97 Weldolet - Coupling A182 F316L, CL 6000, SW, ASME B16.11 Cap A182 F316L, CL 6000, NPT, ASME B16.11 Plug A182 F316L, NPT, ASME B16.11 A182 F316L, BW, MSS-SP-97 A403 Gr. WP 316L, BW, ASME B16.9 - Spectacle Blind, Spacer & Blanks A182 F316L, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F316L, CL 1500, SW-RTJ, ASME B16.5 A182 F316L, CL 1500, WN-RTJ, ASME B16.5 (Note1) A182 F316L, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF2CXI/BF2CMI BF2CJRI / BF2CJFI Check Valve CF2CXP CF2CJW / CF2CJS Gate Valve GF2CX / GF2CM GF2CJ Globe Valve LF2CX LF2CJ Needle Valve Gasket Bolt/Nuts NF2CX / NF2CM 316L Octagonal Ring, CL1500, ASME B16.20 (Max. hardness is 160HB) ASTM A193 Gr.B7Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 199 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 150. ATTACHMENT B Service Material NDT PIPING SYSTEM SPECIFICATIONS F1SA0Z To be specified Piping Class: Stainless Steel ASME B16.5 Pressure Class Refer to Specification of Piping Inspection F1SA0Z 1500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 17900 Design code ASME B31.3 15700 Size 1/2"-1" 1 1/2” 2”-3” 4”-18” 20”-24” Pipe THK SCH 80S SCH80S SCH80S SCH160 SCH160 Material Fittings Elbow, Tee, Reducer Sockolet A312 TP316L SMLS, PE, ASME B36.19M Forged Fittings: A182 F316L, CL 6000, SW, ASME B16.11 A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL 6000, SW, MSS-SP-97 Weldolet - Coupling A182 F316L, CL 6000, SW, ASME B16.11 Cap A182 F316L, CL 6000, NPT, ASME B16.11 Plug A182 F316L, NPT, ASME B16.11 A182 F316L, BW, MSS-SP-97 A403 Gr. WP 316L, BW, ASME B16.9 - Spectacle Blind, Spacer & Blanks A182 F316L, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F316L, CL 1500, SW-RTJ, ASME B16.5 A182 F316L, CL 1500, WN-RTJ, ASME B16.5 (Note1) A182 F316L, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF2CXI/BF2CMI BF2CJRI / BF2CJFI Check Valve CF2CXP CF2CJW / CF2CJS Gate Valve GF2CX / GF2CM GF2CJ Globe Valve LF2CX LF2CJ Needle Valve NF2CX / NF2CM Gasket Bolt/Nuts 316L Octagonal Ring, CL1500, ASME B16.20 (Max. hardness is 160HB) ASTM A193 Gr.B7Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 200 151. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F2SA0Z Service To be specified Piping Class: Material Stainless Steel ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection F2SA0Z 1500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 15100 15100 Size 1/2"-1 1/2” Pipe THK SCH 80S Material Fittings Elbow, Tee, Reducer Sockolet A312 TP316L SMLS, PE, ASME B36.19M Forged Fittings: A182 F316L, CL 6000, SW, ASME B16.11 Design code ASME B31.3 2”-4” 6”-18” 20”-24” SCH80S SCH 120 SCH120 A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A182 F316L, CL 6000, SW, MSS-SP-97 Weldolet - Coupling A182 F316L, CL 6000, SW, ASME B16.11 Cap A182 F316L, CL 6000, NPT, ASME B16.11 Plug A182 F316L, NPT, ASME B16.11 A182 F316L, BW, MSS-SP-97 A403 Gr. WP 316L, BW, ASME B16.9 - Spectacle Blind, Spacer & Blanks A182 F316L, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F316L, CL 1500, SW-RTJ, ASME B16.5 A182 F316L, CL 1500, WN-RTJ, ASME B16.5 (Note1) A182 F316L, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF2CXI/BF2CMI BF2CJRI / BF2CJFI Check Valve CF2CXP CF2CJW / CF2CJS Gate Valve GF2CX / GF2CM GF2CJ Globe Valve LF2CX LF2CJ Needle Valve Gasket Bolt/Nuts NF2CX / NF2CM 316L Octagonal Ring, CL1500, ASME B16.20 (Max. hardness is 160HB) ASTM A193 Gr.B7Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 201 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 152. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F0SI0N To be specified Duplex Stainless Steel(NACE MR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection Piping Class: F0SI0N ASME B16.5 Pressure Class 1500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25860 25860 25330 22960 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-4" 6"-8" 10”-18” 20”-24” Pipe THK SCH 80S SCH 80S SCH 120 SCH 120 SCH 120 Material A790 UNS S31803 SMLS, PE, ASME B36.19M, NACE MR0175/ISO15156 Fittings A182 F51, CL 6000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 Weldolet Coupling Cap Plug A928 UNS S31803, WELDED BE, ASME ASME B36.19M, NACE B36.19M, MR0175/ISO15156 (Note6) Forged Fittings: Elbow, Tee, Sockolet A790 UNS S31803 SMLS, BE, A182 F51, CL 6000, SW, MSS-SP-97, NACE MR0175/ISO15156 - NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 A182 F51, BW, MSS-SP-97, NACE MR0175/ISO15156 A182 F51, CL 6000, SW, ASME B16.11, NACE MR0175/ISO15156 A182 F51,NPT, ASME B16.11, NACE MR0175/ISO15156 A182 F51, NPT, ASME B16.11, NACE MR0175/ISO15156 A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 - Spectacle Blind, Spacer & Blanks A182 F51, CL 1500, Female Ring Joint, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) Blind Flange(Note11) A182 F51, CL 1500, SW-RTJ, ASME A182 F51, CL 1500, WN-RTJ, ASME B16.5 (Note1) , NACE B16.5, NACE MR0175/ISO15156 MR0175/ISO15156 A182 F51, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF8EXIV / BF8EMIV BF8EJRIV / BF8EJFIV Check Valve CF8EXPV CF8EJWV / CF8EJSV Gate Valve GF8EXV / GF8EMV GF8EJV Globe Valve LF8EXV LF8EJV NF8EXV / NF8EMV - Needle Valve Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) , NACE MR0175/ISO15156 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 202 153. Service ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F1SI0N To be specified Duplex Stainless Steel(NACE MR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection Piping Class: F1SI0N ASME B16.5 Pressure Class 1500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 22400 22400 Size 1/2"-1 1/2" Pipe THK SCH 80S Material A790 UNS S31803 SMLS,PE, ASME B36.19M, NACE MR0175/ISO15156 Fittings A182 F51, CL 6000, SW, ASME B16.11, Reducer NACE MR0175/ISO15156 Sockolet Weldolet Coupling Cap Plug ASME B31.3 2"-6" 8" 10”-18” 20”-24” SCH 80S SCH 100 SCH 100 SCH 100 A790 UNS S31803 SMLS, BE, A928 UNS S31803 WELDED, BE, ASME B36.19M, NACE ASME MR0175/ISO15156 MR0175/ISO15156 (Note6) Forged Fittings: Elbow, Tee, A182 F51, CL 6000, SW, MSS-SP-97, NACE MR0175/ISO15156 - Design code B36.19M, NACE Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 A182 F51, BW, MSS-SP-97, NACE MR0175/ISO15156 A182 F51, CL 6000, SW, ASME B16.11, NACE MR0175/ISO15156 A182 F51, CL6000,NPT, ASME B16.11, NACE MR0175/ISO15156 A182 F51, NPT, ASME B16.11, NACE MR0175/ISO15156 A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 - Spectacle Blind, Spacer & A182 F51, CL 1500, Female Ring Joint, ASME B16.48, NACE MR0175/ISO15156 Blanks(Note11) Flange(Note11) Blind Flange(Note11) A182 F51, CL 1500, SW-RTJ, ASME A182 F51, CL 1500, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 B16.5 (Note1) A182 F51, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF8EXIV / BF8EMIV BF8EJRIV / BF8EJFIV Check Valve CF8EXPV CF8EJWV / CF8EJSV Gate Valve GF8EXV / GF8EMV GF8EJV Globe Valve LF8EXV LF8EJV Needle Valve NF8EXV / NF8EMV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) , NACE MR0175/ISO15156 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 203 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 154. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F2SI0N To be specified Duplex Stainless Steel(NACE MR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection Piping Class: F2SI0N ASME B16.5 Pressure Class 1500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 18900 18900 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-4" 6"-8" 10”-14” 16”-18” 20”-24” Pipe THK SCH 80S SCH 40S SCH 80S SCH80 SCH100 SCH100 Material A790 UNS S31803 SMLS, PE, ASME B36.19M, NACE MR0175/ISO15156 Fittings A182 F51, CL 6000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 Weldolet Coupling Cap Plug A928 UNS S31803 WELDED, BE, ASME ASME B36.19M, NACE B36.19M(Note6) MR0175/ISO15156 MR0175/ISO15156 Forged Fittings: Elbow, Tee, Sockolet A790 UNS S31803 SMLS, BE, A182 F51, CL 6000, SW, MSS-SP-97, NACE MR0175/ISO15156 - , NACE Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 A182 F51, BW, MSS-SP-97, NACE MR0175/ISO15156 A182 F51, CL 6000, SW, ASME B16.11, NACE MR0175/ISO15156 A182 F51, CL6000,NPT, ASME B16.11, NACE MR0175/ISO15156 A182 F51, NPT, ASME B16.11, NACE MR0175/ISO15156 A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 - Spectacle Blind, Spacer & A182 F51, CL 1500, Female Ring Joint, ASME B16.48, NACE MR0175/ISO15156 Blanks(Note11) Flange(Note11) Blind Flange(Note11) A182 F51, CL 1500, SW-RTJ, ASME A182 F51, CL 1500, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 B16.5, NACE MR0175/ISO15156 (Note1) A182 F51, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF8EXIV / BF8EMIV BF8EJRIV / BF8EJFIV Check Valve CF8EXPV CF8EJWV / CF8EJSV Gate Valve GF8EXV / GF8EMV GF8EJV Globe Valve LF8EXV LF8EJV NF8EXV / NF8EMV - Needle Valve Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) , NACE MR0175/ISO15156 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 204 155. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F0SI0Z Piping Class: To be specified Duplex Stainless Steel Material NDT Refer to Specification of Piping Inspection F0SI0Z ASME B16.5 Pressure Class 1500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25860 25860 25330 22960 Size Pipe THK Material 1/2"-1 1/2" 2"-4" 6"-8" 10”-18” 20”-24” SCH 80S SCH 80S SCH 120 SCH 120 SCH 120 ASME B36.19M A182 F51, CL 6000, SW, Reducer ASME B16.11 Coupling Cap Plug ASME B36.19M Forged Fittings: Elbow, Tee, Weldolet ASME B31.3 A790 UNS S31803, SMLS, PE, A790 UNS S31803, SMLS, BE, A928 UNS S31803,,WELDED BE, ASME Fittings Sockolet Design code A182 F51, CL 6000, SW, MSS-SP-97 - B36.19M(Note6) Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9 A182 F51, BW, MSS-SP-97 A182 F51, CL 6000, SW, ASME B16.11 A182 F51, CL6000,NPT, ASME B16.11 A815 UNS S31803, BW, ASME B16.9 A182 F51, NPT, ASME B16.11 - Spectacle Blind, Spacer & Blanks A182 F51, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) A182 F51, CL 1500, SW-RTJ, ASME B16.5 A182 F51, CL 1500, WN-RTJ, ASME B16.5 (Note1) Blind Flange(Note11) A182 F51, CL 1500, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF8EXI / BF8EMI BF8EJRI / BF8EJFI Check Valve CF8EXP CF8EJW / CF8EJS Gate Valve GF8EX / GF8EM GF8EJ Globe Valve LF8EX LF8EJ Needle Valve NF8EX / NF8EM - Gasket Bolt/Nuts 316L Octagonal Ring, CL1500, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 205 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 156. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F1SI0Z To be specified Duplex Stainless Steel Material NDT Refer to Specification of Piping Inspection Piping Class: F1SI0Z ASME B16.5 Pressure Class 1500 Corrosion Allowance: Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 22400 22400 0mm Design code ASME B31.3 Size 1/2"-1 1/2" 2"-6" 8" 10”-18” 20”-24” Pipe THK SCH 80S SCH 80S SCH 100 SCH 100 SCH 100 Material A790 UNS S31803, SMLS, PE, A790 UNS S31803, SMLS, BE, A928 UNS S31803,,WELDED BE, ASME ASME B36.19M B36.19M(Note6) Fittings Forged Fittings: Elbow, Tee, A182 F51, CL 6000, SW, Reducer ASME B16.11 Sockolet Weldolet Coupling Cap Plug ASME B36.19M A182 F51, CL 6000, SW, MSS-SP-97 - Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9 A182 F51, BW, MSS-SP-97 A182 F51, CL 6000, SW, ASME B16.11 A182 F51,CL6000,NPT, ASME B16.11 A815 UNS S31803, BW, ASME B16.9 A182 F51, NPT, ASME B16.11 - Spectacle Blind, Spacer & Blanks A182 F51, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) A182 F51, CL 1500, SW-RTJ, ASME B16.5 A182 F51, CL 1500, WN-RTJ, ASME B16.5 (Note1) Blind Flange(Note11) A182 F51, CL 1500, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF8EXI / BF8EMI BF8EJRI / BF8EJFI Check Valve CF8EXP CF8EJW / CF8EJS Gate Valve GF8EX / GF8EM GF8EJ Globe Valve LF8EX LF8EJ NF8EX / NF8EM - Needle Valve Gasket Bolt/Nuts 316L Octagonal Ring, CL1500, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 206 157. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F2SI0Z Piping Class: To be specified Duplex Stainless Steel Material NDT Refer to Specification of Piping Inspection F2SI0Z ASME B16.5 Pressure Class 1500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 18900 18900 Size Material SCH 80S 6"-8" SCH 40S SCH 80S 10”-14” 16”-18” 20”-24” SCH80 SCH100 SCH100 A790 UNS S31803, SMLS, BE, A928 UNS S31803,WELDED BE, ASME ASME B36.19M ASME B36.19M B36.19M(Note6) Forged Fittings: Elbow, Tee, A182 F51, CL 6000, SW, ASME Reducer B16.11 A182 F51, CL 6000, SW, MSS-SP-97 Weldolet Coupling 2"-4" A790 UNS S31803, SMLS, PE, Fittings Sockolet ASME B31.3 1/2"-1 1/2" Pipe THK Design code A182 F51, CL 6000, SW, ASME B16.11 Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9 A182 F51, BW, MSS-SP-97 - Cap - A815 UNS S31803, BW, ASME B16.9 Plug A182 F51, NPT, ASME B16.11 - Spectacle Blind, Spacer & Blanks A182 F51, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F51, CL 1500, SW-RTJ, ASME B16.5 A182 F51, CL 1500, WN-RTJ, ASME B16.5 (Note1) A182 F51, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF8EXI / BF8EMI BF8EJRI / BF8EJFI Check Valve CF8EXP CF8EJW / CF8EJS Gate Valve GF8EX / GF8EM GF8EJ Globe Valve LF8EX LF8EJ Needle Valve NF8EX / NF8EM - Gasket Bolt/Nuts 316L Octagonal Ring, CL1500, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 207 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 158. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F0SK0N To be specified Super Duplex Stainless Steel(NACEMR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection Piping Class: F0SK0N ASME B16.5 Pressure Class 1500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25860 25860 25330 22960 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-8" 10”-18” 20”-24” Pipe THK SCH 80S SCH 80S SCH 100 SCH100 Material A790 UNS S32750SMLS, PE, ASME B36.19M, NACE MR0175/ISO15156 Fittings A182 F53, CL 6000, SW, ASME Reducer B16.11, NACE MR0175/ISO15156 Weldolet Pipe Nipple Coupling Cap Plug ASME B36.19M, NACE ASMEB36.19M, NACE MR0175/ISO15156 MR0175/ISO15156 (Note6) Forged Fittings: Elbow, Tee, Sockolet A790 UNS S32750SMLS, BE, A928 UNS S32750 WELDED, BE, A182 F53, CL 6000, SW, MSS-SP-97, NACE MR0175/ISO15156 - Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 A182 F53, BW, MSS-SP-97, NACE MR0175/ISO15156 A182 F53, PE, L=100mm(Note1) , NACE MR0175/ISO15156 A182 F53, CL 6000, SW, ASME B16.11, NACE MR0175/ISO15156 A182 F53,CL6000,NPT, ASME B16.11, NACE MR0175/ISO15156 A182 F53, NPT, ASME B16.11, NACE MR0175/ISO15156 A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 - Spectacle Blind, Spacer & Blanks A182 F53, CL 1500, Female Ring Joint, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) Blind Flange(Note11) A182 F53, CL 1500, SW-RTJ, ASME A182 F53, CL 1500, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 B16.5, NACE MR0175/ISO15156 (Note1) A182 F53, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves (Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF10PXIV / BF10PMIV BF10PJRIV / BF10PJFIV Check Valve CF10PXPV CF10PJWV / CF10PJSV Gate Valve GF10PXV / GF10PMV GF10PJV Globe Valve LF10PXV LF10PJV Needle Valve NF10PXV / NF10PMV - Gasket 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) , NACE MR0175/ISO15156 Bolt/Nuts ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 208 159. Service Material ATTACHMENT B PIPING SYSTEM SPECIFICATIONS F1SK0N To be specified Super Duplex Stainless Steel (NACE MR0175/ISO15156) NDT Refer to Specification of Piping Inspection Piping Class: F1SK0N ASME B16.5 Pressure Class 1500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 22400 22400 Size 1/2"-1 1/2" Pipe THK SCH 80S Material A790 UNS S32750, SMLS, PE, ASME B36.19M, NACE MR0175/ISO15156 Fittings A182 F53, CL 6000, SW, ASME B16.11, Reducer NACE MR0175/ISO15156 Sockolet Weldolet Coupling Cap Plug ASME B31.3 A182 F53, CL 6000, SW, MSS-SP-97, NACE MR0175/ISO15156 - 2"-8" 10”-18” 20”-24” SCH 80S SCH 80 SCH80 A790 UNS S32750, SMLS, A928 UNS S32750,,WELDED BE, ASME BE, ASME B36.19M, NACE B36.19M, NACE MR0175/ISO15156 MR0175/ISO15156 Forged Fittings: Elbow, Tee, Design code (Note6) Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 A182 F53, BW, MSS-SP-97, NACE MR0175/ISO15156 A182 F53, CL 6000, SW, ASME B16.11, NACE MR0175/ISO15156 A182 F53,CL6000,NPT, ASME B16.11, NACE MR0175/ISO15156 A182 F53, NPT, ASME B16.11, NACE MR0175/ISO15156 A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 - Spectacle Blind, Spacer & Blanks A182 F53, CL 1500, Female Ring Joint, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) Blind Flange(Note11) A182 F53, CL 1500, SW-RTJ, ASME A182 F53, CL 1500, WN-RTJ, ASME B16.5, NACE B16.5, NACE MR0175/ISO15156 MR0175/ISO15156 (Note1) A182 F53, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF10PXIV / BF10PMVI BF10PJRIV / BF10PJFIV Check Valve CF10PXPV CF10PJWV / CF10PJSV Gate Valve GF10PXV / GF10PMV GF10PJV Globe Valve LF10PXV LF10PJV Needle Valve NF10PXV / NF10PMV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) , NACE MR0175/ISO15156 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 209 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 160. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F2SK0N Piping Class: To be specified Super Duplex Stainless Steel(NACE MR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection F2SK0N ASME B16.5 Pressure Class 1500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 18900 18900 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-4" 6"-8" 10”-12” 14”-24” 20”-24” Pipe THK SCH 80S SCH 40S SCH 80S SCH60 SCH80 SCH80 Material A790 UNS S32750, SMLS, PE, ASME B36.19M, NACE MR0175/ISO15156 Fittings A182 F53, CL 6000, SW, ASME B16.11, Reducer NACE MR0175/ISO15156 Weldolet Coupling Cap Plug A928 UNS S32750,WELDED BE, ASME B36.19M, NACE ASME MR0175/ISO15156 MR0175/ISO15156 (Note6) Forged Fittings: Elbow, Tee, Sockolet A790 UNS S32750, SMLS, BE, B36.19M, NACE Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 A182 F53, CL 6000, SW, MSS-SP-97, - NACE MR0175/ISO15156 - A182 F53, BW, MSS-SP-97, NACE MR0175/ISO15156 A182 F53, CL 6000, SW, ASME B16.11, - NACE MR0175/ISO15156 A182 F53,CL6000,NPT, ASME B16.11, A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 NACEMR0175/ISO15156 A182 F53, NPT, ASME B16.11, NACE - MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A182 F53, CL 1500, Female Ring Joint, ASME B16.48, NACE MR0175/ISO15156 (Note11) Flange(Note11) Blind Flange(Note11) A182 F53, CL 1500, SW-RTJ, ASME A182 F53, CL 1500, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 B16.5, NACE MR0175/ISO15156 (Note1) A182 F53, CL 1500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF10PXIV / BF10PMIV BF10PJRIV / BF10PJFIV Check Valve CF10PXPV CF10PJWV / CF10PJSV Gate Valve GF10PXV / GF10PMV GF10PJV Globe Valve LF10PXV LF10PJV NF10PXV / NF10PMV - Needle Valve Gasket Bolt/Nuts 316L Octagonal Ring, CL 1500, ASME B16.20 (Max. hardness is 160HB) , NACE MR0175/ISO15156 ASTM A193 Gr.B7M Stud Bolt / A194 Gr.2HM HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with yellow color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 210 161. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F0SK0Z Piping Class: To be specified Duplex Stainless Steel Material NDT F0SK0Z ASME B16.5 Pressure Class Refer to Specification of Piping Inspection Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 25860 25860 25330 22960 Size 1/2"-1 1/2" Pipe THK Material SCH 80S 10”-18” 20”-24” SCH 80S SCH 100 SCH100 ASME B36.19M Forged Fittings: A182 F53, CL 6000, SW, ASME B16.11 A182 F53, CL 6000, SW, MSS-SP-97 Weldolet - Pipe Nipple A182 F53, PE, L=100mm(Note1) Plug 2"-8" ASME B36.19M Reducer Cap ASME B31.3 A790 UNS S32750, SMLS, BE, A928 UNS S32750,,WELDED BE, ASME Elbow, Tee, Coupling 0mm Design code A790 UNS S32750, SMLS, PE, Fittings Sockolet 1500 Corrosion Allowance: B36.19M(Note6) Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9 A182 F53, BW, MSS-SP-97 A182 F53, CL 6000, SW, ASME B16.11 A182 F53,CL6000,NPT, ASME B16.11 A182 F53, NPT, ASME B16.11 A815 UNS S32750, BW, ASME B16.9 - Spectacle Blind, Spacer & Blanks A182 F53, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F53, CL 1500, SW-RTJ, ASME B16.5 A182 F53, CL 1500, WN-RTJ, ASME B16.5 (Note1) A182 F53, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF10PXI / BF10PMI BF10PJRI / BF10PJFI Check Valve CF10PXP CF10PJW / CF10PJS Gate Valve GF10PX / GF10PM GF10PJ Globe Valve LF10PX LF10PJ Needle Valve NF10PX / NF10PM - Gasket 316L Octagonal Ring, CL1500, ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 211 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 162. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F1SK0Z Piping Class: To be specified Duplex Stainless Steel Material NDT Refer to Specification of Piping Inspection F1SK0Z ASME B16.5 Pressure Class 1500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 22400 22400 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-8" 10”-18” 20”-24” Pipe THK SCH 80S SCH 80S SCH 80 SCH80 Material A790 UNS S32750, SMLS, PE, A790 UNS S32750, SMLS, BE, A928 UNS S32750,,WELDED BE, ASME ASME B36.19M ASME B36.19M B36.19M(Note6) Fittings Forged Fittings: Elbow, Tee, A182 F53, CL 6000, SW, ASME Reducer B16.11 Sockolet Weldolet Coupling Cap Plug A182 F53, CL 6000, SW, MSS-SP-97 - Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9 A182 F53, BW, MSS-SP-97 A182 F53, CL 6000, SW, ASME B16.11 A182 F53,CL6000,NPT, ASME B16.11 A182 F53, NPT, ASME B16.11 A815 UNS S32750, BW, ASME B16.9 - Spectacle Blind, Spacer & Blanks A182 F53, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F53, CL 1500, SW-RTJ, ASME B16.5 A182 F53, CL 1500, WN-RTJ, ASME B16.5 (Note1) A182 F53, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF10PXI / BF10PMI BF10PJRI / BF10PJFI Check Valve CF10PXP CF10PJW / CF10PJS Gate Valve GF10PX / GF10PM GF10PJ Globe Valve LF10PX LF10PJ NF10PX / NF10PM - Needle Valve Gasket Bolt/Nuts 316L Octagonal Ring, CL1500, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 212 163. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS F2SK0Z Piping Class: To be specified Duplex Stainless Steel Material NDT F2SK0Z ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 18900 18900 Size 1/2"-1 1/2" Pipe THK Material SCH 80S SCH 40S SCH 80S 10”-12” 14”-18” 20”-24” SCH60 SCH80 SCH80 ASME B36.19M B36.19M(Note6) Forged Fittings: B16.11 Plug 6"-8" ASME B36.19M A182 F53, CL 6000, SW, ASME Cap 2"-4" A928 UNS S32750,WELDED BE, ASME Reducer Coupling ASME B31.3 A790 UNS S32750, SMLS, BE, Elbow, Tee, Weldolet Design code A790 UNS S32750, SMLS, PE, Fittings Sockolet 1500 Corrosion Allowance: A182 F53, CL 6000, SW, MSS-SP-97 - Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9 A182 F53, BW, MSS-SP-97 A182 F53, CL 6000, SW, ASME B16.11 A182 F53,CL6000,NPT, ASME B16.11 A182 F53, NPT, ASME B16.11 A815 UNS S32750, BW, ASME B16.9 - Spectacle Blind, Spacer & Blanks A182 F53, CL 1500, RTJ, ASME B16.48 (Note11) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F53, CL 1500, SW-RTJ, ASME B16.5 A182 F53, CL 1500, WN-RTJ, ASME B16.5 (Note1) A182 F53, CL 1500, RTJ, ASME B16.5 ASME B16.34 CL 1500 ASME B16.34 CL 1500 Ball Valve BF10PXI / BF10PMI BF10PJRI / BF10PJFI Check Valve CF10PXP CF10PJW / CF10PJS Gate Valve GF10PX / GF10PM GF10PJ Globe Valve LF10PX LF10PJ Needle Valve NF10PX / NF10PM - Gasket Bolt/Nuts 316L Octagonal Ring, CL1500, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 213 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 164. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G0CA3N To be specified Piping Class: G0CA3N(Note3) Material Carbon Steel (NACE MR0175/ISO15156) ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection Corrosion Allowance: 2500 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 42550 41770 38830 37560 Size 1/2”-1” 1 1/2” 2” Pipe THK XXS 12mm 13mm Material Fittings 3” 4” 6” 18mm 22mm 30mm 10” 12” 38mm 48mm 8” 56mm A106 Gr. B SMLS, BE, ASME B36.10M, NACE NACE MR0175/ISO15156. MR0175/ISO15156. Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9, NACE Reducer MR0175/ISO15156. Cap ASME B31.3 A106 Gr. B SMLS, BE, ASME B36.10M, Elbow, Tee, Weldolet Design code A105, BW, MSS-SP-97, NACE MR0175/ISO15156. A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. A105, BW, MSS-SP-97, NACE MR0175/ISO15156. A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A105, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A105, CL 2500, WN-RTJ, ASME B16.5(Note1) , NACE MR0175/ISO15156. A105, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156. ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG1CJRIV/BG1CWRIV/BG1CBRIV BG1CJRIV/BG1CJFIV Check Valve CG1CJPV/CG1CWPV CG1CJWV/CG1CJSV Gate Valve GG1CJV/GG1CBV/GG1CWV GG1CJV Globe Valve LG1CJV/LG1CWV LG1CJV Needle Valve NG1CBV/NG1CWV - Gasket 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 214 165. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G1CA3N Service To be specified Material Carbon Steel(NACE MR0175/ISO15156) Piping Class: ASME B16.5 Pressure Class G1CA3N (note3) NDT Refer to Specification of Piping Inspection Corrosion Allowance: 2500 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 36800 36800 Size Material Fittings 2” XXS 13mm NACE MR0175/ISO15156. 4” 18mm 22mm 6” 8” 10” 12” 27mm 34mm 42mm 49mm MR0175/ISO15156. Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9, NACE Reducer MR0175/ISO15156. Cap 3” A106 Gr. B SMLS, BE, ASME B36.10M, A106 Gr. B SMLS, BE, ASME B36.10M, NACE Elbow, Tee, Weldolet ASME B31.3 1/2”-1 1/2” Pipe THK Design code A105, BW, MSS-SP-97, NACE MR0175/ISO15156. A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. A105, BW, MSS-SP-97, NACE MR0175/ISO15156. A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A105, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A105, CL 2500, WN-RTJ, ASME B16.5(Note1) , NACE MR0175/ISO15156. A105, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156. ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG1CJRIV/BG1CWRIV/BG1CBRIV BG1CJRIV/BG1CJFIV Check Valve CG1CJPV/CG1CWPV CG1CJWV/CG1CJSV Gate Valve GG1CJV/GG1CBV/GG1CWV GG1CJV Globe Valve LG1CJV/LG1CWV LG1CJV Needle Valve NG1CBV/NG1CWV - Gasket 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 215 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 166. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G2CA3N To be specified Piping Class: G2CA3N(note3) Material Carbon Steel(NACE MR0175/ISO15156) ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection Corrosion Allowance: 2500 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 31200 31200 Size Fittings 2”-4” 6” 8” 10” 12” XXS XXS 24mm 30mm 36mm 42mm A106 Gr. B SMLS, BE, ASME B36.10M, NACE A106 Gr. B SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156. A234 Gr. WPB, BW, ASME B16.9, NACE Reducer MR0175/ISO15156. Cap MR0175/ISO15156. Butt Weld Fittings: (Note1) Elbow, Tee, Weldolet ASME B31.3 1/2”-1 1/2” Pipe THK Material Design code A105, BW, MSS-SP-97, NACE MR0175/ISO15156. A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. A105, BW, MSS-SP-97, NACE MR0175/ISO15156. A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A105, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A105, CL 2500, WN-RTJ, ASME B16.5(Note1) , NACE MR0175/ISO15156. A105, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156. ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG1CJRIV/BG1CWRIV/BG1CBRIV BG1CJRIV/BG1CJFIV Check Valve CG1CJPV/CG1CWPV CG1CJWV/CG1CJSV Gate Valve GG1CJV/GG1CBV/GG1CWV GG1CJV Globe Valve LG1CJV/LG1CWV LG1CJV Needle Valve NG1CBV/NG1CWV - Gasket 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 216 167. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G0CA3Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection G0CA3Z 2500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 42550 41770 38830 37560 Size Pipe THK 1/2”-1” 1 1/2” XXS 12mm Material A106 Gr. B SMLS, BE, ASME B36.10M Fittings Butt Weld Fittings: (Note1) Elbow, Tee, 2” 13mm Design code ASME B31.3 3” 4” 6” 18mm 22mm 30mm 38mm 10” 12” 48mm 56mm A106 Gr. B SMLS, BE, ASME B36.10M Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 A234 Gr. WPB, BW, ASME B16.9 Weldolet A105, BW, MSS-SP-97 A105, BW, MSS-SP-97 Cap A234 Gr. WPB, BW, ASME B16.9 A234 Gr. WPB, BW, ASME B16.9 Reducer 8” Spectacle Blind, Spacer & Blanks A105, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) A105, CL 2500, WN-RTJ, ASME B16.5(Note1) Blind Flange(Note11) A105, CL 2500, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG1CJRI/BG1CWRI/BG1CBRI BG1CJRI/BG1CJFI Check Valve CG1CJP/CG1CWP CG1CJW/CG1CJS Gate Valve GG1CJ/GG1CB/GG1CW GG1CJ Globe Valve LG1CJ/LG1CW LG1CJ Needle Valve NG1CB/NG1CW - Gasket 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. 217 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 168. ATTACHMENT B Service Material NDT PIPING SYSTEM SPECIFICATIONS G1CA3Z To be specified Piping Class: Carbon Steel ASME B16.5 Pressure Class Refer to Specification of Piping Inspection G1CA3Z 2500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 36800 36800 Size Pipe THK Material Fittings Elbow, Tee, ASME B31.3 1/2”-1 1/2” 2” XXS 13mm A106 Gr. B SMLS, BE, ASME B36.10M Design code 3” 4” 18mm 22mm 6” 8” 10” 12” 27mm 34mm 42mm 49mm A106 Gr. B SMLS, BE, ASME B36.10M Butt Weld Fittings: (Note1) Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 A234 Gr. WPB, BW, ASME B16.9 Weldolet A105, BW, MSS-SP-97 A105, BW, MSS-SP-97 Cap A234 Gr. WPB, BW, ASME B16.9 A234 Gr. WPB, BW, ASME B16.9 Reducer Spectacle Blind, Spacer & Blanks A105, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A105, CL 2500, WN-RTJ, ASME B16.5(Note1) A105, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG1CJRI/BG1CWRI/BG1CBRI BG1CJRI/BG1CJFI Check Valve CG1CJP/CG1CWP CG1CJW/CG1CJS Gate Valve GG1CJ/GG1CB/GG1CW GG1CJ Globe Valve LG1CJ/LG1CW LG1CJ Needle Valve NG1CB/NG1CW - Gasket 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. 218 169. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G2CA3Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class 2500 Corrosion Allowance: 3mm NDT Refer to Specification of Piping Inspection G2CA3Z Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 31200 31200 Size Pipe THK Material Fittings Elbow, Tee, ASME B31.3 1/2”-1 1/2” XXS A106 Gr. B SMLS, BE, ASME B36.10M Design code 2”-4” 6” 8” 10” 12” XXS 24mm 30mm 36mm 42mm A106 Gr. B SMLS, BE, ASME B36.10M Butt Weld Fittings: (Note1) Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 A234 Gr. WPB, BW, ASME B16.9 Weldolet A105, BW, MSS-SP-97 A105, BW, MSS-SP-97 Cap A234 Gr. WPB, BW, ASME B16.9 A234 Gr. WPB, BW, ASME B16.9 Reducer Spectacle Blind, Spacer & Blanks A105, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A105, CL 2500, WN-RTJ, ASME B16.5(Note1) A105, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG1CJRI/BG1CWRI/BG1CBRI BG1CJRI/BG1CJFI Check Valve CG1CJP/CG1CWP CG1CJW/CG1CJS Gate Valve GG1CJ/GG1CB/GG1CW GG1CJ Globe Valve LG1CJ/LG1CW LG1CJ Needle Valve NG1CB/NG1CW - Gasket 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. 219 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 170. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G0CA6N To be specified Piping Class: G0CA6N (note3) Material Carbon Steel (NACE MR0175/ISO15156) ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection Corrosion Allowance: 2500 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 42550 41770 38830 37560 Design code ASME B31.3 Size 1/2” 3/4” 1” 1 1/2” 2” 3” 4” 6” 8” 10” 12” Pipe THK - - - - 17mm 21mm 25mm 34mm 42mm 50mm 59mm Material Fittings A106 Gr. B SMLS, BE, ASME B36.10M, A106 Gr. B SMLS, BE, ASME B36.10M, NACE NACE MR0175/ISO15156. MR0175/ISO15156. Butt Weld Fittings: (Note1) Elbow, Tee, A234 Gr. WPB, BW, ASME B16.9, NACE Reducer MR0175/ISO15156. Weldolet Cap A105, BW, MSS-SP-97, NACE MR0175/ISO15156. A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. A105, BW, MSS-SP-97, NACE MR0175/ISO15156. A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A105, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A105, CL 2500, WN-RTJ, ASME B16.5(Note1) , NACE MR0175/ISO15156. A105, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156. ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG1CJRIQV/BG1CWRIQV/BG1CBRIQV BG1CJRIQV/BG1CJFIQV Check Valve CG1CJPQV/CG1CWPQV CG1CJWQV/CG1CJSQV Gate Valve GG1CJQV/GG1CBQV/GG1CWQV GG1CJQV Globe Valve LG1CJQV/LG1CWQV LG1CJQV Needle Valve NG1CBQV/NG1CWQV - Ball Valve Gasket 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 220 171. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G1CA6N Service To be specified Material Carbon Steel(NACE MR0175/ISO15156) Piping Class: ASME B16.5 Pressure Class G1CA6N (note3) NDT Refer to Specification of Piping Inspection Corrosion Allowance: 2500 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 36800 36800 1/2” 3/4” 1” 1 1/2” 2” - - - - 16mm Size Pipe THK Material Fittings ASME B31.3 NACE MR0175/ISO15156. 4” 20mm 23mm 6” 8” 10” 12” 31mm 38mm 45mm 52mm MR0175/ISO15156. Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9, NACE Reducer MR0175/ISO15156. Cap 3” A106 Gr. B SMLS, BE, ASME B36.10M, A106 Gr. B SMLS, BE, ASME B36.10M, NACE Elbow, Tee, Weldolet Design code A105, BW, MSS-SP-97, NACE MR0175/ISO15156. A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. A105, BW, MSS-SP-97, NACE MR0175/ISO15156. A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A105, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A105, CL 2500, WN-RTJ, ASME B16.5(Note1) , NACE MR0175/ISO15156. A105, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156. ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG1CJRIQV/BG1CWRIQV/BG1CBRIQV BG1CJRIQV/BG1CJFIQV Check Valve CG1CJPQV/CG1CWPQV CG1CJWQV/CG1CJSQV Gate Valve GG1CJQV/GG1CBQV/GG1CWQV GG1CJQV Globe Valve LG1CJQV/LG1CWQV LG1CJQV Needle Valve NG1CBQV/NG1CWQV - Gasket 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 221 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 172. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G2CA6N To be specified Piping Class: G2CA6N (note3) Material Carbon Steel(NACE MR0175/ISO15156) ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection Corrosion Allowance: 2500 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 31200 31200 Design code ASME B31.3 Size 1/2” 3/4” 1” 1 1/2” 2” 3” 4” 6” 8” 10” 12” Pipe THK - - - - 15mm 18mm 21mm 27mm 33mm 40mm 46mm Material Fittings A106 Gr. B SMLS, BE, ASME B36.10M, NACE A106 Gr. B SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156. Elbow, Tee, A234 Gr. WPB, BW, ASME B16.9, NACE Reducer MR0175/ISO15156. Weldolet Cap MR0175/ISO15156. Butt Weld Fittings: (Note1) A105, BW, MSS-SP-97, NACE MR0175/ISO15156. A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. A105, BW, MSS-SP-97, NACE MR0175/ISO15156. A234 Gr. WPB, BW, ASME B16.9, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A105, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A105, CL 2500, WN-RTJ, ASME B16.5(Note1) , NACE MR0175/ISO15156. A105, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156. ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG1CJRIQV/BG1CWRIQV/BG1CBRIQV BG1CJRIQV/BG1CJFIQV Check Valve CG1CJPQV/CG1CWPQV CG1CJWQV/CG1CJSQV Gate Valve GG1CJQV/GG1CBQV/GG1CWQV GG1CJQV Globe Valve LG1CJQV/LG1CWQV LG1CJQV Needle Valve NG1CBQV/NG1CWQV - Ball Valve Gasket 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. 222 173. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G0CA6Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection G0CA6Z 2500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 42550 41770 38830 37560 Size Pipe THK Material Fittings Elbow, Tee, 1/2” 3/4” 1” 1 1/2” - - - - A106 Gr. B SMLS, BE, ASME B36.10M Design code ASME B31.3 2” 3” 4” 6” 17mm 21mm 25mm 34mm 42mm 10” 12” 50mm 59mm A106 Gr. B SMLS, BE, ASME B36.10M Butt Weld Fittings: (Note1) Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 A234 Gr. WPB, BW, ASME B16.9 Weldolet A105, BW, MSS-SP-97 A105, BW, MSS-SP-97 Cap A234 Gr. WPB, BW, ASME B16.9 A234 Gr. WPB, BW, ASME B16.9 Reducer 8” Spectacle Blind, Spacer & Blanks A105, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A105, CL 2500, WN-RTJ, ASME B16.5(Note1) A105, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG1CJRIQ/BG1CWRIQ/BG1CBRIQ BG1CJRIQ/BG1CJFIQ Check Valve CG1CJPQ/CG1CWPQ CG1CJWQ/CG1CJSQ Gate Valve GG1CJQ/GG1CBQ/GG1CWQ GG1CJQ Globe Valve LG1CJQ/LG1CWQ LG1CJQ Needle Valve NG1CBQ/NG1CWQ - Gasket 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. 223 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 174. ATTACHMENT B Service Piping Class: Carbon Steel ASME B16.5 Pressure Class Material NDT PIPING SYSTEM SPECIFICATIONS G1CA6Z To be specified Refer to Specification of Piping Inspection G1CA6Z 2500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 36800 36800 ASME B31.3 Size 1/2” 3/4” 1” 1 1/2” 2” Pipe THK - - - - 16mm Material Fittings Elbow, Tee, Design code A106 Gr. B SMLS, BE, ASME B36.10M 3” 4” 20mm 23mm 6” 8” 10” 12”-24” 31mm 38mm 45mm 52mm A106 Gr. B SMLS, BE, ASME B36.10M Butt Weld Fittings: (Note1) Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 A234 Gr. WPB, BW, ASME B16.9 Weldolet A105, BW, MSS-SP-97 A105, BW, MSS-SP-97 Cap A234 Gr. WPB, BW, ASME B16.9 A234 Gr. WPB, BW, ASME B16.9 Reducer Spectacle Blind, Spacer & Blanks A105, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A105, CL 2500, WN-RTJ, ASME B16.5(Note1) A105, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG1CJRIQ/BG1CWRIQ/BG1CBRIQ BG1CJRIQ/BG1CJFIQ Check Valve CG1CJPQ/CG1CWPQ CG1CJWQ/CG1CJSQ Gate Valve GG1CJQ/GG1CBQ/GG1CWQ GG1CJQ Globe Valve LG1CJQ/LG1CWQ LG1CJQ Needle Valve NG1CBQ/NG1CWQ - Gasket 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. 224 175. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G2CA6Z Service To be specified Piping Class: Material Carbon Steel ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection G2CA6Z 2500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 31200 31200 1/2” 3/4” 1” 1 1/2” - - - - Size Pipe THK Material Fittings Elbow, Tee, Design code ASME B31.3 A106 Gr. B SMLS, BE, ASME B36.10M 2” 3” 4” 6” 8” 10” 12”” 15mm 18mm 21mm 27mm 33mm 40mm 45mm A106 Gr. B SMLS, BE, ASME B36.10M Butt Weld Fittings: (Note1) Butt Weld Fittings: (Note1) A234 Gr. WPB, BW, ASME B16.9 A234 Gr. WPB, BW, ASME B16.9 Weldolet A105, BW, MSS-SP-97 A105, BW, MSS-SP-97 Cap A234 Gr. WPB, BW, ASME B16.9 A234 Gr. WPB, BW, ASME B16.9 Reducer Spectacle Blind, Spacer & Blanks A105, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A105, CL 2500, WN-RTJ, ASME B16.5(Note1) A105, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG1CJRIQ/BG1CWRIQ/BG1CBRIQ BG1CJRIQ/BG1CJFIQ Check Valve CG1CJPQ/CG1CWPQ CG1CJWQ/CG1CJSQ Gate Valve GG1CJQ/GG1CBQ/GG1CWQ GG1CJQ Globe Valve LG1CJQ/LG1CWQ LG1CJQ Needle Valve NG1CBQ/NG1CWQ - Gasket 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, Sherardizing coating Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. 225 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 176. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G0CF3N Piping Class: To be specified High Strength Carbon Steel Material NDT G0CF3N(Note3) ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 2500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 42550 41770 38830 37560 Size 1/2”-11/2” Pipe THK Material 2”-3” 6” 8” 10” B36.10M, NACE MR0175/ISO15156 BE, ASME B36.10M (Note6), NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9, Reducer NACE MR0175/ISO15156 A860 WPHY 65, BW, MSS-SP-97, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A860 WPHY 65, BW, MSS-SP-97, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A694 F65, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11,12) Flange (Note11) Blind Flange (Note11) Valves(Note11) Ball Valve A694 F65, CL 2500 WN-RTJ, ASME B16.5 (Note1), NACE MR0175/ISO15156 A694 F65, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156 ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG1CJRIV/ BG1CWRIV/BG1CBRIV BG1CJRIV / BG1CJFIV Butterfly Valve - - Check Valve CG1CJPV / CG1CWPV CG1CJWV / CG1CJSV Gate Valve GG1CJV / GG1CBV/GG1CWV GG1CJV Globe Valve LG1CJV/LG1CWV LG1CJV Needle Valve NG1CBV / NG1CWV - Gasket 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 226 12” XXS 19mm 25mm 37mm 45mm 53mm API 5L X65 PSL2 SMLS, BE, ASME API 5L X65 PSL2 SMLS, BE, ASME B36.10M or API 5L X65 PSL2 SAW, Elbow, Tee, Cap ASME B31.3 XXS Fittings Weldolet 4” Design code 177. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G1CF3N Piping Class: To be specified High Strength Carbon Steel Material NDT Refer to Specification of Piping Inspection G1CF3N(Note3) ASME B16.5 Pressure Class 2500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 36800 36800 Size 1/2”-11/2” Pipe THK Material XXS 2”-3” 4” 6” 8” 10” 12” API 5L X65 PSL2 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 BE, ASME B36.10M (Note6), NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) Elbow, Tee, A860 WPHY 65, BW, ASME B16.9, Reducer NACE MR0175/ISO15156 Cap ASME B31.3 XXS 19mm 25mm 37mm 45mm 47mm API 5L X65 PSL2 SMLS, BE, ASME B36.10M or API 5L X65 PSL2 SAW, Fittings Weldolet Design code A860 WPHY 65, BW, MSS-SP-97, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A860 WPHY 65, BW, MSS-SP-97, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A694 F65, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11,12) Flange(Note11) A694 F65, CL 2500 Blind Flange(Note11) Valves(Note11) Ball Valve WN-RTJ, ASME B16.5 (Note1), NACE MR0175/ISO15156 A694 F65, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156 ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG1CJRIV/ BG1CWRIV/BG1CBRIV BG1CJRIV / BG1CJFIV Butterfly Valve - - Check Valve CG1CJPV / CG1CWPV CG1CJWV / CG1CJSV Gate Valve GG1CJV / GG1CBV/GG1CWV GG1CJV Globe Valve LG1CJV/LG1CWV LG1CJV Needle Valve NG1CBV / NG1CWV - Gasket 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 227 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 178. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G2CF3N Piping Class: To be specified High Strength Carbon Steel Material NDT G2CF3N(Note3) ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 2500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 31200 31200 Size 1/2”-11/2” Pipe THK Material XXS 2”-3” 4” 6” 8” 10” B36.10M, NACE MR0175/ISO15156 BE, ASME B36.10M (Note6), NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9, Reducer NACE MR0175/ISO15156 A860 WPHY 65, BW, MSS-SP-97, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A860 WPHY 65, BW, MSS-SP-97, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A694 F65, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11,12) Flange(Note11) A694 F65, CL 2500 Blind Flange(Note11) Valves(Note11) Ball Valve WN-RTJ, ASME B16.5 (Note1), NACE MR0175/ISO15156 A694 F65, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156 ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG1CJRIV/ BG1CWRIV/BG1CBRIV BG1CJRIV / BG1CJFIV Butterfly Valve - - Check Valve CG1CJPV / CG1CWPV CG1CJWV / CG1CJSV Gate Valve GG1CJV / GG1CBV/GG1CWV GG1CJV Globe Valve LG1CJV/LG1CWV LG1CJV Needle Valve NG1CBV / NG1CWV - Gasket 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 228 12” API 5L X65 PSL2 SMLS, BE, ASME Elbow, Tee, Cap ASME B31.3 XXS 15mm 20mm 29mm 35mm 41mm API 5L X65 PSL2 SMLS, BE, ASME B36.10M or API 5L X65 PSL2 SAW, Fittings Weldolet Design code 179. Service ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G0CF6N To be specified High Strength Carbon Steel (NACE MR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection Piping Class: G0CF6N(Note3) ASME B16.5 Pressure Class 2500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 42550 41770 38830 37560 Size 1/2” 3/4” 1” 1 1/2” Pipe THK - - - - API 5L X65 PSL2 SMLS, BE, Material ASME B36.10M, NACE MR0175/ISO15156 2” 4” 6” 8” 10” 12” 22mm 28mm 41mm 49mm 57mm BE, ASME B36.10M (Note6), NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) Elbow, Tee, A860 WPHY 65, BW, ASME Reducer B16.9, NACE MR0175/ISO15156 Cap ASME B31.3 API 5L X65 PSL2 SMLS, BE, ASME B36.10M or API 5L X65 PSL2 SAW, Fittings Weldolet 3” 15mm 18mm Design code A860 WPHY 65, BW, MSS-SP-97, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A860 WPHY 65, BW, MSS-SP-97, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A694 F65, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) Ball Valve A694 F65, CL 2500 WN-RTJ, ASME B16.5 (Note1), NACE MR0175/ISO15156 A694 F65, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156 ASME B16.34 CL 2500 BG1CJRIV/ BG1CWRIV/BG1CBRIV ASME B16.34 CL 2500 BG1CJRIV / BG1CJFIV Butterfly Valve - - Check Valve CG1CJPV / CG1CWPV CG1CJWV / CG1CJSV Gate Valve GG1CJV / GG1CBV/GG1CWV GG1CJV Globe Valve LG1CJV/LG1CWV LG1CJV Needle Valve NG1CBV / NG1CWV - Gasket 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 229 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 180. Service ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G1CF6N To be specified High Strength Carbon Steel (NACE MR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection Piping Class: G1CF6N(Note3) ASME B16.5 Pressure Class 2500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 36800 36800 Size 1/2” 3/4” 1” 1 1/2” Pipe THK - - - - Material 2” 4” 6” 8” 10” B36.10M, NACE MR0175/ISO15156 SAW, BE, ASME B36.10M (Note6), NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9, Reducer NACE MR0175/ISO15156 A860 WPHY 65, BW, MSS-SP-97, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A860 WPHY 65, BW, MSS-SP-97, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A694 F65, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11,12) Flange(Note11) A694 F65, CL 2500 Blind Flange(Note11) Valves(Note11) Ball Valve WN-RTJ, ASME B16.5 (Note1), NACE MR0175/ISO15156 A694 F65, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156 ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG1CJRIV/ BG1CWRIV/BG1CBRIV BG1CJRIV / BG1CJFIV Butterfly Valve - - Check Valve CG1CJPV / CG1CWPV CG1CJWV / CG1CJSV Gate Valve GG1CJV / GG1CBV/GG1CWV GG1CJV Globe Valve LG1CJV/LG1CWV LG1CJV Needle Valve NG1CBV / NG1CWV - Gasket 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 230 12” API 5L X65 PSL2 SMLS, BE, ASME Elbow, Tee, Cap ASME B31.3 14mm 17mm 20mm 26mm 37mm 44mm 51mm API 5L X65 PSL2 SMLS, BE, ASME B36.10M or API 5L X65 PSL2 Fittings Weldolet 3” Design code 181. Service ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G2CF6N To be specified High Strength Carbon Steel (NACE MR0175/ISO15156) Material NDT Refer to Specification of Piping Inspection Piping Class: G2CF6N(Note3) ASME B16.5 Pressure Class 2500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 31200 31200 Size 1/2” 3/4” 1” 1 1/2” Pipe THK - - - - Material 2” 4” 6” 8” 10” 12” API 5L X65 PSL2 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 BE, ASME B36.10M (Note6), NACE MR0175/ISO15156 Butt Weld Fittings: (Note1) Elbow, Tee, A860 WPHY 65, BW, ASME B16.9, Reducer NACE MR0175/ISO15156 Cap ASME B31.3 13mm XXS 18mm 23mm 33mm 39mm 44mm API 5L X65 PSL2 SMLS, BE, ASME B36.10M or API 5L X65 PSL2 SAW, Fittings Weldolet 3” Design code A860 WPHY 65, BW, MSS-SP-97, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 A860 WPHY 65, BW, MSS-SP-97, NACE MR0175/ISO15156 A860 WPHY 65, BW, ASME B16.9, NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A694 F65, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156 (Note11,12) Flange(Note11) A694 F65, CL 2500 Blind Flange(Note11) Valves(Note11) Ball Valve WN-RTJ, ASME B16.5 (Note1), NACE MR0175/ISO15156 A694 F65, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156 ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG1CJRIV/ BG1CWRIV/BG1CBRIV BG1CJRIV / BG1CJFIV Butterfly Valve - - Check Valve CG1CJPV / CG1CWPV CG1CJWV / CG1CJSV Gate Valve GG1CJV / GG1CBV/GG1CWV GG1CJV Globe Valve LG1CJV/LG1CWV LG1CJV Needle Valve NG1CBV / NG1CWV - Gasket 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 231 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 182. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G0CF3Z Piping Class: To be specified High Strength Carbon Steel Material NDT G0CF3Z ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 2500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 42550 41770 38830 37560 Size Pipe THK Material 1/2”-11/2” XXS 2”-3” Reducer ASME B31.3 6” 8” ASME B36.10M ASME B36.10M (Note6) Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, MSS-SP-97 Cap A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, MSS-SP-97 Spectacle Blind, Spacer & Blanks A694 F65, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) A694 F65, CL 2500 Flange(Note11) Valves(Note11) Ball Valve WN-RTJ, ASME B16.5 (Note1) A694 F65, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG1CJRI / BG1CWRI/BG1CBRI BG1CJRI / BG1CJFI Butterfly Valve - - Check Valve CG1CJP / CG1CWP CG1CJW / CG1CJS Gate Valve GG1CJ / GG1CB/GG1CW GG1CJ Globe Valve LG1CJ/LG1CW LG1CJ Needle Valve NG1CB / NG1CW - Gasket 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 232 12” API 5L X65 PSL2 SMLS, BE, Weldolet Blind 10” XXS 19mm 25mm 37mm 45mm 53mm API 5L X65 PSL2 SMLS, BE, ASME B36.10M or API 5L X65 PSL2 SAW, BE, Fittings Elbow, Tee, 4” Design code 183. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G1CF3Z Piping Class: To be specified High Strength Carbon Steel Material Refer NDT to Specification of Piping Inspection G1CF3Z ASME B16.5 Pressure Class 2500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 36800 36800 Size 1/2”-11/2” Pipe THK Material ASME B31.3 2”-3” XXS 6” 8” 10” 12” API 5L X65 PSL2 SMLS, BE, ASME B36.10M BE, ASME B36.10M (Note1) Butt Weld Fittings: (Note1) Elbow, Tee, A860 WPHY 65, BW, ASME Reducer B16.9 Cap 4” XXS 19mm 25mm 37mm 45mm 47mm API 5L X65 PSL2 SMLS, BE, ASME B36.10M orAPI 5L X65 PSL2 SAW, Fittings Weldolet Design code A860 WPHY 65, BW, A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, MSS-SP-97 MSS-SP-97 A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A694 F65, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) A694 F65, CL 2500 WN-RTJ, ASME B16.5 (Note1) Blind Flange(Note11) A694 F65, CL 2500, RTJ, ASME B16.5 Valves(Note11) Ball Valve ASME B16.34 CL 2500 BG1CJRI / BG1CWRI/BG1CBRI ASME B16.34 CL 2500 BG1CJRI / BG1CJFI Butterfly Valve - - Check Valve CG1CJP / CG1CWP CG1CJW / CG1CJS Gate Valve GG1CJ / GG1CB/GG1CW GG1CJ Globe Valve LG1CJ/LG1CW LG1CJ Needle Valve NG1CB / NG1CW - Gasket 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings. Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 233 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 184. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G2CF3Z Piping Class: To be specified High Strength Carbon Steel Material NDT G2CF3Z ASME B16.5 Pressure Class Refer to Specification of Piping Inspection Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 31200 31200 Size 1/2”-11/2” Pipe THK Material 6” 8” 10” ASME B36.10M BE, ASME B36.10M(Note6) Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME Reducer B16.9 A860 WPHY 65, BW, A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, MSS-SP-97 MSS-SP-97 A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A694 F65, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) A694 F65, CL 2500 WN-RTJ, ASME B16.5 (Note1) Blind Flange(Note11) A694 F65, CL 2500, RTJ, ASME B16.5 Valves(Note11) Ball Valve ASME B16.34 CL 2500 BG1CJRI / BG1CWRI/BG1CBRI ASME B16.34 CL 2500 BG1CJRI / BG1CJFI Butterfly Valve - - Check Valve CG1CJP / CG1CWP CG1CJW / CG1CJS Gate Valve GG1CJ / GG1CB/GG1CW GG1CJ Globe Valve LG1CJ/LG1CW LG1CJ Needle Valve NG1CB / NG1CW - Gasket 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings. Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 234 12” API 5L X65 PSL2 SMLS, BE, Elbow, Tee, Cap 4” XXS 15mm 20mm 29mm 35mm 41mm API 5L X65 PSL2 SMLS, BE, ASME B36.10M or API 5L X65 PSL2 SAW, Fittings Weldolet Design code ASME B31.3 2”-6” XXS 2500 185. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G0CF6Z Piping Class: To be specified High Strength Carbon Steel Material NDT Refer to Specification of Piping Inspection G0CF6Z ASME B16.5 Pressure Class 2500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 42550 41770 38830 37560 Size 1/2” 3/4” 1” 1 1/2” Pipe THK - - - - Material 2” Reducer 4” ASME B31.3 6” 8” 10” 12” API 5L X65 PSL2 SMLS, BE, 15mm 18mm 22mm 28mm 41mm 49mm 57mm API 5L X65 PSL2 SMLS, BE, ASME B36.10M or API 5L X65 PSL2 SAW, BE, ASME B36.10M ASME B36.10M (Note6) Fittings Elbow, Tee, 3” Design code Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 Weldolet A860 WPHY 65, BW, MSS-SP-97 Cap A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, MSS-SP-97 Spectacle Blind, Spacer & Blanks A694 F65, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) A694 F65, CL 2500 Blind Flange(Note11) Valves(Note11) Ball Valve WN-RTJ, ASME B16.5 (Note1) A694 F65, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG1CJRI / BG1CWRI/BG1CBRI BG1CJRI / BG1CJFI Butterfly Valve - - Check Valve CG1CJP / CG1CWP CG1CJW / CG1CJS Gate Valve GG1CJ / GG1CB/GG1CW GG1CJ Globe Valve LG1CJ/LG1CW LG1CJ Needle Valve NG1CB / NG1CW - Gasket 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings。 Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 235 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 186. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G1CF6Z Piping Class: To be specified High Strength Carbon Steel Material NDT G1CF6Z ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 2500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 36800 36800 Size 1/2” 3/4” 1” 1 1/2” Pipe THK - - - - Material ASME B31.3 2” 3” 4” 6” 8” ASME B36.10M ASME B36.10M (Note1) Butt Weld Fittings: (Note1) A860 WPHY 65, BW, ASME Reducer B16.9 Weldolet A860 WPHY 65, BW, MSS-SP-97 A860 WPHY 65, BW, MSS-SP-97 A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A694 F65, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) A694 F65, CL 2500 Flange(Note11) Valves(Note11) Ball Valve WN-RTJ, ASME B16.5 (Note1) A694 F65, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG1CJRI / BG1CWRI/BG1CBRI BG1CJRI / BG1CJFI Butterfly Valve - - Check Valve CG1CJP / CG1CWP CG1CJW / CG1CJS Gate Valve GG1CJ / GG1CB/GG1CW GG1CJ Globe Valve LG1CJ/LG1CW LG1CJ Needle Valve NG1CB / NG1CW - Gasket 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings. Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 236 12” API 5L X65 PSL2 SMLS, BE, Elbow, Tee, Blind 10” 14mm 17mm 20mm 26mm 37mm 44mm 51mm API 5L X65 PSL2 SMLS, BE, ASME B36.10M orAPI 5L X65 PSL2 SAW, BE, Fittings Cap Design code 187. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G2CF6Z Piping Class: To be specified High Strength Carbon Steel Material NDT Refer to Specification of Piping Inspection G2CF6Z ASME B16.5 Pressure Class 2500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 31200 31200 Size 1/2” 3/4” 1” 1 1/2” Pipe THK - - - - Material ASME B31.3 2” 3” 4” 6” 8” 10” 12” API 5L X65 PSL2 SMLS, BE, 13mm XXS 18mm 23mm 33mm 39mm 44mm API 5L X65 PSL2 SMLS, BE, ASME B36.10M or API 5L X65 PSL2 SAW, BE, ASME B36.10M ASME B36.10M(Note6) Fittings Butt Weld Fittings: (Note1) Elbow, Tee, A860 WPHY 65, BW, ASME Reducer B16.9 Weldolet A860 WPHY 65, BW, MSS-SP-97 A860 WPHY 65, BW, MSS-SP-97 Cap Design code A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 A860 WPHY 65, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A694 F65, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) A694 F65, CL 2500 Blind Flange(Note11) Valves(Note11) Ball Valve WN-RTJ, ASME B16.5 (Note1) A694 F65, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG1CJRI / BG1CWRI/BG1CBRI BG1CJRI / BG1CJFI Butterfly Valve - - Check Valve CG1CJP / CG1CWP CG1CJW / CG1CJS Gate Valve GG1CJ / GG1CB/GG1CW GG1CJ Globe Valve LG1CJ/LG1CW LG1CJ Needle Valve NG1CB / NG1CW - Gasket 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160HB) Bolt/Nuts A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, with Sherardizing coatings. Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 237 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 188. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G0AA3L Piping Class: To be specified Low Temperature Carbon Steel Material NDT G0AA3L ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 2500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 42550 42550 41770 38830 37560 Design code ASME B31.3 Size 1/2”-1” 1 1/2” 2” 3” 4” 6” 8” 10” 12” Pipe THK XXS 11mm 13mm 17mm 21mm 29mm 36mm 44mm 52mm Material A333 Gr. 3 SMLS, BE, ASME B36.10M A333 Gr. 3 SMLS, BE, ASME B36.10M Fittings Elbow, Tee, Reducer Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9 A420 WPL3, BW, ASME B16.9 Weldolet A350 LF3 CL2, BW, MSS-SP-97 A350 LF3 CL2, BW, MSS-SP-97 Cap A420 WPL3, BW, ASME B16.9 A420 WPL3, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) A350 LF3 CL2, CL 2500 Blind Flange(Note11) Valves(Note11) Ball Valve WN-RTJ, ASME B16.5 (Note1) A350 LF3, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG9CJRI / BG9CWRI/BG9CBRI BG9CJRI / BG9CJFI Butterfly Valve - - Check Valve CG9CJP / CG9CWP CG9CJW / CG9CJS Gate Valve GG9CJ / GG9CB/GG9CW GG9CJ Globe Valve LG9CJ/LG9CW LG9CJ Needle Valve NG9CB / NG9CW - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 238 189. ATTACHMENT B Service Piping Class: To be specified Low Temperature Carbon Steel Material NDT PIPING SYSTEM SPECIFICATIONS G1AA3L Refer to Specification of Piping Inspection G1AA3L ASME B16.5 Pressure Class 2500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 36800 36800 36800 Design code ASME B31.3 Size 1/2”-1” 1 1/2” 2” 3” 4” 6” 8” 10” 12” Pipe THK XXS 11mm 13mm 17mm 21mm 28mm 35mm 43mm 50mm Material A333 Gr. 3 SMLS, BE, ASME B36.10M A333 Gr. 3 SMLS, BE, ASME B36.10M Fittings Butt Weld Fittings: (Note1) Elbow, Tee, A420 WPL3, BW, Reducer ASME B16.9 Weldolet Cap A350 LF3 CL2, BW, MSS-SP-97 A420 WPL3, BW, ASME B16.9 A420 WPL3, BW, ASME B16.9 A350 LF3 CL2, BW, MSS-SP-97 A420 WPL3, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) A350 LF3 CL2, CL 2500 Blind Flange(Note11) Valves(Note11) Ball Valve WN-RTJ, ASME B16.5 (Note1) A350 LF3, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 BG9CJRI / BG9CWRI/BG9CBRI ASME B16.34 CL 2500 BG9CJRI / BG9CJFI Butterfly Valve - - Check Valve CG9CJP / CG9CWP CG9CJW / CG9CJS Gate Valve GG9CJ / GG9CB/GG9CW GG9CJ Globe Valve LG9CJ/LG9CW LG9CJ Needle Valve NG9CB / NG9CW - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 239 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 190. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G2AA3L Piping Class: To be specified Low Temperature Carbon Steel Material NDT Refer to Specification of Piping Inspection G2AA3L ASME B16.5 Pressure Class 2500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 31200 31200 31200 Size Pipe THK Material ASME B31.3 1/2”-1 1/2” 2”-3” 4” 6” 8” 10” 12” XXS XXS 18mm 25mm 31mm 39mm 44mm A333 Gr. 3 SMLS, BE, ASME B36.10M A333 Gr. 3 SMLS, BE, ASME B36.10M Fittings Elbow, Tee, Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9 A420 WPL3, BW, ASME B16.9 Weldolet A350 LF3 CL2, BW, MSS-SP-97 A350 LF3 CL2, BW, MSS-SP-97 Cap A420 WPL3, BW, ASME B16.9 A420 WPL3, BW, ASME B16.9 Reducer Design code Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) Ball Valve A350 LF3 CL2, CL 2500 WN-RTJ, ASME B16.5 (Note1) A350 LF3, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG9CJRI / BG9CWRI/BG9CBRI BG9CJRI / BG9CJFI Butterfly Valve - - Check Valve CG9CJP / CG9CWP CG9CJW / CG9CJS Gate Valve GG9CJ / GG9CB/GG9CW GG9CJ Globe Valve LG9CJ/LG9CW LG9CJ Needle Valve NG9CB / NG9CW - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 240 191. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G0AA6L Piping Class: To be specified Low Temperature Carbon Steel Material NDT Refer to Specification of Piping Inspection G0AA6L ASME B16.5 Pressure Class 2500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 42550 42550 41770 38830 37560 Size 1/2” 3/4” 1” 1 1/2” 2” 3” 4” 6” 8” 10” 12” Pipe THK - - - - 16mm 20mm 24mm 32mm 39mm 47mm 55mm Material A333 Gr. 3 SMLS, BE, ASME B36.10M A333 Gr. 3 SMLS, BE, ASME B36.10M Fittings Elbow, Tee, Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9 A420 WPL3, BW, ASME B16.9 Weldolet A350 LF3 CL2, BW, MSS-SP-97 A350 LF3 CL2, BW, MSS-SP-97 Cap A420 WPL3, BW, ASME B16.9 A420 WPL3, BW, ASME B16.9 Reducer ASME B31.3 Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) A350 LF3 CL2, CL 2500 Blind Flange(Note11) Valves(Note11) Ball Valve WN-RTJ, ASME B16.5 (Note1) A350 LF3, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 BG9CJRIQ / BG9CWRIQ/BG9CBRIQ ASME B16.34 CL 2500 BG9CJRIQ / BG9CJFIQ Butterfly Valve - - Check Valve CG9CJPQ / CG9CWPQ CG9CJWQ / CG9CJSQ Gate Valve GG9CJQ / GG9CB/GG9CWQ GG9CJQ Globe Valve LG9CJQ/LG9CWQ LG9CJQ Needle Valve NG9CBQ / NG9CWQ - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 241 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 192. ATTACHMENT B Service Piping Class: To be specified Low Temperature Carbon Steel Material NDT PIPING SYSTEM SPECIFICATIONS G1AA6L G1AA6L ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 2500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 36800 36800 36800 Size 1/2” Pipe THK Material 3/4 1” 1 1/2” 2” - - - 16mm A333 Gr. 3 SMLS, BE, ASME B36.10M Reducer ASME B31.3 4” 20mm 23mm 6” 8” 10” 12” 31mm 38mm 46mm 53mm A333 Gr. 3 SMLS, BE, ASME B36.10M Fittings Elbow, Tee, 3” Design code Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9 A420 WPL3, BW, ASME B16.9 Weldolet A350 LF3 CL2, BW, MSS-SP-97 A350 LF3 CL2, BW, MSS-SP-97 Cap A420 WPL3, BW, ASME B16.9 A420 WPL3, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) A350 LF3 CL2, CL 2500 Blind Flange(Note11) Valves(Note11) Ball Valve WN-RTJ, ASME B16.5 (Note1) A350 LF3, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 BG9CJRIQ / BG9CWRIQ/BG9CBRIQ ASME B16.34 CL 2500 BG9CJRIQ / BG9CJFIQ Butterfly Valve - - Check Valve CG9CJPQ / CG9CWPQ CG9CJWQ / CG9CJSQ Gate Valve GG9CJQ / GG9CBQ/GG9CWQ GG9CJQ Globe Valve LG9CJQ/LG9CWQ LG9CJQ Needle Valve NG9CBQ / NG9CWQ - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 242 193. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G2AA6L Piping Class: To be specified Low Temperature Carbon Steel Material NDT Refer to Specification of Piping Inspection G2AA6L ASME B16.5 Pressure Class 2500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 31200 31200 31200 Size 1/2” Pipe THK Material ASME B31.3 3/4 1” 1 1/2” 2” 3” 4” 6” 8” 10” 12” - - - 15mm 18mm 21mm 28mm 34mm 40mm 47mm A333 Gr. 3 SMLS, BE, ASME B36.10M A333 Gr. 3 SMLS, BE, ASME B36.10M Fittings Elbow, Tee, Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9 A420 WPL3, BW, ASME B16.9 Weldolet A350 LF3 CL2, BW, MSS-SP-97 A350 LF3 CL2, BW, MSS-SP-97 Cap A420 WPL3, BW, ASME B16.9 A420 WPL3, BW, ASME B16.9 Reducer Design code Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) Ball Valve A350 LF3 CL2, CL 2500 WN-RTJ, ASME B16.5 (Note1) A350 LF3, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG9CJRIQ/ BG9CWRI/BG9CBRIQ BG9CJRIQ / BG9CJFIQ Butterfly Valve - - Check Valve CG9CJPQ / CG9CWPQ CG9CJWQ / CG9CJSQ Gate Valve GG9CJQ / GG9CB/GG9CWQ GG9CJQ Globe Valve LG9CJQ/LG9CWQ LG9CJQ Needle Valve NG9CBQ / NG9CWQ - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 243 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 194. Service PIPING SYSTEM SPECIFICATIONS G0AA3O To be specified Low Temperature Carbon Steel(NACE MR0175/ISO15156) Material NDT ATTACHMENT B Refer to Specification of Piping Inspection Piping Class: G0AA3O ASME B16.5 Pressure Class 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 42550 42550 41770 38830 37560 Size 1/2”-1” 1 1/2” Pipe THK XXS 11mm Material A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156. 2” Design code ASME B31.3 4” 6” 8” 10” 12” 21mm 29mm 36mm 44mm 52mm A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156. Butt Weld Fittings: (Note1) Elbow, Tee, A420 WPL3, BW, ASME B16.9, Reducer NACE MR0175/ISO15156. Cap 3” 13mm 17mm Fittings Weldolet 2500 Corrosion Allowance: A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156. A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156. A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11,12) Flange(Note11) A350 LF3 CL2, CL 2500 WN-RTJ, ASME B16.5 (Note1) , NACE MR0175/ISO15156. Blind Flange(Note11) Valves(Note11) Ball Valve A350 LF3, CL 2500, RTJ, ASME B16.5 , NACE MR0175/ISO15156. ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG9CJRIV / BG9CWRIV/BG9CBRIV BG9CJRIV / BG9CJFIV Butterfly Valve - - Check Valve CG9CJPV / CG9CWPV CG9CJWV / CG9CJSV Gate Valve GG9CJV / GG9CB/GG9CWV GG9CJV Globe Valve LG9CJV/LG9CWV LG9CJV Needle Valve NG9CBV / NG9CWV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 244 195. Service Material ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G1AA3O To be specified Low Temperature Carbon Steel(NACE MR0175/ISO15156) NDT Refer to Specification of Piping Inspection Piping Class: G1AA3O ASME B16.5 Pressure Class 2500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 36800 36800 36800 Design code ASME B31.3 Size 1/2”-1” 1 1/2” 2” 3” 4” 6” 8” 10” 12” Pipe THK XXS 11mm 13mm 17mm 21mm 28mm 35mm 43mm 50mm A333 Gr. 3 SMLS, BE, Material ASME B36.10M, NACE A333 Gr. 3 SMLS, BE, ASME B36.10M , NACE MR0175/ISO15156. MR0175/ISO15156. Fittings Elbow, Tee, Reducer Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9, NACE A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. MR0175/ISO15156. A350 LF3 CL2, BW, Weldolet MSS-SP-97, NACE A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156. MR0175/ISO15156. A420 WPL3, BW, ASME Cap B16.9, NACE A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11,12) Flange(Note11) A350 LF3 CL2, CL 2500 Blind Flange(Note11) Valves(Note11) Ball Valve WN-RTJ, ASME B16.5 (Note1) , NACE MR0175/ISO15156. A350 LF3, CL 2500, RTJ, ASME B16.5 , NACE MR0175/ISO15156. ASME B16.34 CL 2500 BG9CJRIV / BG9CWRIV/BG9CBRIV ASME B16.34 CL 2500 BG9CJRIV / BG9CJFIV Butterfly Valve - - Check Valve CG9CJPV / CG9CWPV CG9CJWV / CG9CJSV Gate Valve GG9CJV / GG9CBV/GG9CWV Globe Valve LG9CJV/LG9CWV Needle Valve NG9CBV / NG9CWV Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, GG9CJV LG9CJV ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 245 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 196. Service PIPING SYSTEM SPECIFICATIONS G2AA3O To be specified Low Temperature Carbon Steel(NACE MR0175/ISO15156) Material NDT ATTACHMENT B Refer to Specification of Piping Inspection Piping Class: G2AA3O ASME B16.5 Pressure Class 2500 Corrosion Allowance: 3mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 31200 31200 31200 Size Pipe THK Design code ASME B31.3 1/2”-1 1/2” 2”-3” 4” 6” 8” 10” 12” XXS XXS 18mm 25mm 31mm 39mm 44mm A333 Gr. 3 SMLS, BE, ASME Material B36.10M, NACE A333 Gr. 3 SMLS, BE, ASME B36.10M , NACE MR0175/ISO15156. MR0175/ISO15156. Fittings Butt Weld Fittings: (Note1) Elbow, Tee, A420 WPL3, BW, ASME B16.9, Reducer NACE MR0175/ISO15156. Weldolet Cap A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156. A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156. A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) Ball Valve A350 LF3 CL2, CL 2500 WN-RTJ, ASME B16.5 (Note1) , NACE MR0175/ISO15156. A350 LF3, CL 2500, RTJ, ASME B16.5 , NACE MR0175/ISO15156. ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG9CJRIV / BG9CWRI/BG9CBRIV BG9CJRIV / BG9CJFIV Butterfly Valve - - Check Valve CG9CJPV / CG9CWPV CG9CJWV / CG9CJSV Gate Valve GG9CJV / GG9CBV/GG9CWV GG9CJV Globe Valve LG9CJV/LG9CWV LG9CJV Needle Valve NG9CBV / NG9CWV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 246 197. ATTACHMENT B Service Piping Class: To be specified Low Temperature Carbon Steel(NACE MR0175/ISO15156) Material NDT PIPING SYSTEM SPECIFICATIONS G0AA6O Refer to Specification of Piping Inspection G0AA6O ASME B16.5 Pressure Class 2500 Corrosion Allowance: 6mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 50 100 150 Design Pressure (kPaG) 42550 42550 41770 38830 37560 Size 1/2” 3/4” 1” 1 1/2” Pipe THK - - - - Material A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156. 2” 4” 6” 8” 10” 12” 24mm 32mm 39mm 47mm 55mm Butt Weld Fittings: (Note1) Elbow, Tee, A420 WPL3, BW, ASME B16.9, Reducer NACE MR0175/ISO15156. Cap ASME B31.3 A333 Gr. 3 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156. Fittings Weldolet 3” 16mm 20mm Design code A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156. A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156. A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11,12) Flange(Note11) A350 LF3 CL2, CL 2500 WN-RTJ, ASME B16.5 (Note1) , NACE MR0175/ISO15156. Blind Flange(Note11) Valves(Note11) Ball Valve A350 LF3, CL 2500, RTJ, ASME B16.5 , NACE MR0175/ISO15156. ASME B16.34 CL 2500 BG9CJRIQV / BG9CWRIQV/BG9CBRIQV ASME B16.34 CL 2500 BG9CJRIQV / BG9CJFIQV Check Valve CG9CJPQV / CG9CWPQV CG9CJWQV / CG9CJSQV Gate Valve GG9CJQV / GG9CB/GG9CWQV GG9CJQV Globe Valve LG9CJQV/LG9CWQV LG9CJQV NG9CBQV / NG9CWQV - Needle Valve Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 247 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 198. Service Material ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G1AA6O To be specified Low Temperature Carbon Steel(NACE MR0175/ISO15156) NDT Piping Class: G1AA6O ASME B16.5 Pressure Class Refer to Specification of Piping Inspection Corrosion Allowance: Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 Design Pressure (kPaG) 36800 36800 36800 Size Pipe THK 1/2” 2500 6mm Design code ASME B31.3 3/4 1” 1 1/2” 2” 3” 4” 6” 8” 10” 12” - - - 16mm 20mm 23mm 31mm 38mm 46mm 53mm A333 Gr. 3 SMLS, BE, ASME Material B36.10M, NACE A333 Gr. 3 SMLS, BE, ASME B36.10M , NACE MR0175/ISO15156. MR0175/ISO15156. Fittings Elbow, Tee, Reducer Butt Weld Fittings: (Note1) A420 WPL3, BW, ASME B16.9, NACE A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. MR0175/ISO15156. A350 LF3 CL2, BW, Weldolet MSS-SP-97, NACE A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156. MR0175/ISO15156. A420 WPL3, BW, ASME Cap B16.9, NACE A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11,12) Flange(Note11) A350 LF3 CL2, CL 2500 ,WN-RTJ, ASME B16.5 (Note1) , NACE MR0175/ISO15156. Blind Flange(Note11) Valves(Note11) Ball Valve Check Valve Gate Valve A350 LF3, CL 2500, RTJ, ASME B16.5 , NACE MR0175/ISO15156. ASME B16.34 CL 2500 BG9CJRIQV/ BG9CWRIQV/BG9CBRIQV CG9CJPQV / CG9CWPQV GG9CJQV / GG9CBQV/GG9CWQV ASME B16.34 CL 2500 BG9CJRIQV / BG9CJFIQV CG9CJWQV / CG9CJSQV GG9CJQV Globe Valve LG9CJQV/LG9CWQV LG9CJQV Needle Valve NG9CBQV / NG9CWQV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 248 199. Service ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G2AA6O Material Piping Class: To be specified Low Temperature Carbon Steel(NACE MR0175/ISO15156) ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection G2AA6O 2500 Corrosion Allowance: 6mm Design Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) -101 38 150 code ASME Design Pressure (kPaG) 31200 31200 31200 B31.3 Size Pipe THK 1/2” 3/4 1” 1 1/2” 2” 3” 4” 6” 8” 10” 12” - - - 15mm 18mm 21mm 28mm 34mm 40mm 47mm A333 Gr. 3 SMLS, BE, ASME Material B36.10M, NACE A333 Gr. 3 SMLS, BE, ASME B36.10M , NACE MR0175/ISO15156. MR0175/ISO15156. Fittings Butt Weld Fittings: (Note1) Elbow, Tee, A420 WPL3, BW, ASME B16.9, Reducer NACE MR0175/ISO15156. Weldolet Cap A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156. A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. A350 LF3 CL2, BW, MSS-SP-97, NACE MR0175/ISO15156. A420 WPL3, BW, ASME B16.9, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A350 LF3 CL2, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) Ball Valve Check Valve Gate Valve Globe Valve Needle Valve Gasket Bolt/Nuts A350 LF3 CL2, CL 2500 WN-RTJ, ASME B16.5 (Note1) , NACE MR0175/ISO15156. A350 LF3, CL 2500, RTJ, ASME B16.5 , NACE MR0175/ISO15156. ASME B16.34 CL 2500 BG9CJRIQV / BG9CWRQI/BG9CBRIQV CG9CJPQV / CG9CWPQV GG9CJQV / GG9CBQV/GG9CWQV ASME B16.34 CL 2500 BG9CJRIQV / BG9CJFIQV CG9CJWQV / CG9CJSQV GG9CJQV LG9CJQV/LG9CWQV LG9CJQV NG9CBQV / NG9CWQV - 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall be match pipe thickness. (2) NPT connection could only be used for connection with instrument, drain & vent valve closure. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test shall be performed as per requirements of ASME B31.3 and related ASTM code. 249 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 200. ATTACHMENT B Service Material NDT PIPING SYSTEM SPECIFICATIONS G0SA0L To be specified Piping Class: Stainless Steel ASME B16.5 Pressure Class Refer to Specification of Piping Inspection G0SA0L 2500 Corrosion Allowance: 0 Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature(℃) -101 38 50 100 150 Design Pressure (kPaG) 34470 34470 33350 28990 26160 Design code ASME B31.3 Size 1/2"-1" 1 1/2” 2” 3” 4” 6” 8” 10” 12” Pipe THK SCH 160 XXS XXS XXS 18mm 26mm 34mm 42mm 50mm Material A312 TP316L SMLS, BE, A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, ASME B36.10M WELDED(≥16”), BE, ASME B36.19M.(Note 6) Fittings Butt Weld Fittings: (Note1) Elbow, Tee, A403 Gr. WP 316L, BW, ASME Reducer B16.9 Weldolet A182 F316L, BW, MSS-SP-97 A182 F316L, BW, MSS-SP-97 Cap - A182 F316L, BW, ASME B16.9 A403 Gr. WP 316L, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A182 F316L, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) Ball Valve A182 F316L, CL 2500, WN-RTJ, ASME B16.5(Note1) A182 F316L, CL 2500, WN-RTJ, ASME B16.5 (Note1)- A182 F316L, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 BG2CJRZI / BG2CBZI/ BG2CWZI ASME B16.34 CL 2500 BG2CJRZI / BG2CJFZI Check Valve CG2CJPZ CG2CJWZ/ CG2CJSZ Gate Valve GG2CJZ / GG2CBZ GG2CJZ Globe Valve LG2CJZ LG2CJZ Needle Valve NG2CWZ/NG2CBZ Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test for materials of this spec. shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 250 201. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G1SA0L Service To be specified Piping Class: Material Stainless Steel ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection G1SA0L 2500 Corrosion Allowance: 0 Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature(℃) -101 38 150 Design Pressure (kPaG) 29800 29800 26160 Design code ASME B31.3 Size 1/2"-1" 1 1/2” 2” 3” 4” 6” 8” 10” 12” Pipe THK SCH 80S XXS XXS XXS XXS 23mm 30mm 37mm 44mm Material A312 TP316L SMLS, BE, ASME B36.19M Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) Fittings Elbow, Tee, Reducer Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A403 Gr. WP 316L, BW, ASME B16.9 Weldolet A182 F316L, BW, MSS-SP-97 Cap - Plug A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L A182 F316L, BW, MSS-SP-97 A182 F316L, BW, ASME B16.9 A182 F316L, NPT, ASME B16.11 Spectacle Blind, Spacer & Blanks A182 F316L, CL 2500, RTJ,ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F316L, CL 2500, WN-RTJ, ASME B16.5(Note1) A182 F316L, CL 2500, WN-RTJ, ASME B16.5 (Note1)- A182 F316L, CL 2500, RTJ,ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG2CJRZI / BG2CBZI/ BG2CWZI BG2CJRZI / BG2CJFZI Check Valve CG2CJPZ CG2CJWZ/ CG2CJSZ Gate Valve GG2CJZ / GG2CBZ GG2CJZ Globe Valve LG2CJZ LG2CJZ Needle Valve NG2CWZ/ NG2CBZ Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test for materials of this spec. shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 251 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 202. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G2SA0L To be specified Material Piping Class: Stainless Steel NDT G2SA0L ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 2500 Corrosion Allowance: 0 Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature(℃) -101 38 150 Design Pressure (kPaG) 25200 25200 25200 Design code ASME B31.3 Size 1/2"-1" 1 1/2” 2”-3” 4”-6” 8” 10” 12” Pipe THK SCH 80S SCH160 SCH160 XXS 26mm 32mm 38mm Material A312 TP316L SMLS, BE, A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L ASME B36.10M Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) Fittings Elbow, Tee, Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A403 Gr. WP 316L, BW, ASME B16.9 Weldolet A182 F316L, BW, MSS-SP-97 A182 F316L, BW, MSS-SP-97 Cap - A182 F316L, BW, ASME B16.9 Reducer Plug A182 F316L, NPT, ASME B16.11 Spectacle Blind, Spacer & Blanks A182 F316L, CL 2500, RTJ,ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F316L, CL 2500, WN-RTJ, ASME B16.5(Note1) A182 F316L, CL 2500, WN-RTJ, ASME B16.5 (Note1)- A182 F316L, CL 2500, RTJ,ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG2CJRZI / BG2CBZI/ BG2CWZI BG2CJRZI / BG2CJFZI Check Valve CG2CJPZ CG2CJWZ/ CG2CJSZ Gate Valve GG2CJZ / GG2CBZ GG2CJZ Globe Valve LG2CJZ LG2CJZ Needle Valve NG2CWZ/ NG2CBZ Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test for materials of this spec. shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 252 203. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G0SA0N Service To be specified Material Stainless Steel (NACE MR0175/ISO15156) ASME B16.5 Pressure Class Piping Class: G0SA0N (note3) NDT Refer to Specification of Piping Inspection Corrosion Allowance: 2500 0 Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature(℃) -29 38 50 100 150 Design Pressure (kPaG) 34470 34470 33350 28990 26160 Size 1/2"-1" 1 1/2” 2” 3” 4” Pipe THK SCH 160 XXS XXS XXS 18mm Material A312 TP316L SMLS, BE,ASME B36.19M, NACE MR0175/ISO15156. 10” 12” 26mm 34mm 42mm 6” 8” 50mm WELDED(≥16”), BE, ASME B36.19M.(Note 6) ,NACE MR0175/ISO15156. Butt Weld Fittings: (Note1) Elbow, Tee, A403 Gr. WP 316L, BW, ASME B16.9, Reducer NACE MR0175/ISO15156. Cap ASME B31.3 A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, Fittings Weldolet Design code A182 F316L, BW, MSS-SP-97 , NACE MR0175/ISO15156. - A403 Gr. WP 316L, BW, ASME B16.9, NACE MR0175/ISO15156. A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. A182 F316L, BW, ASME B16.9, NACE MR0175/ISO15156. A182 F316L, NPT, Plug ASME B16.11, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A182 F316L, CL 2500, RTJ,ASME B16.48, NACE MR0175/ISO15156. (Note11,12) A182 F316L, CL 2500, Flange(Note11) WN-RTJ,ASME B16.5(Note1), NACE MR0175/ISO15156. Blind Flange(Note11) Valves(Note11) A182 F316L, CL 2500, WN-RTJ, ASME B16.5 (Note1), NACE MR0175/ISO15156. A182 F316L, CL 2500, RTJ,ASME B16.5, NACE MR0175/ISO15156. ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG2CJRIV / BG2CBIV/ BG2CWIV BG2CJRIV / BG2CJFIV Check Valve CG2CJPV CG2CJWV/ CG2CJSV Gate Valve GG2CJV / GG2CBV GG2CJV Globe Valve LG2CJV LG2CJV Needle Valve NG2CWV/ NG2CBV Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 253 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 204. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G1SA0N Service To be specified Piping Class: G1SA0N (note3) Material Stainless Steel(NACE MR0175/ISO15156) ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection Corrosion Allowance: 0 Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature(℃) -29 38 150 Design Pressure (kPaG) 29800 29800 26160 1/2"-1" 1 1/2” 2” 3” 4” Pipe THK SCH80S XXS XXS XXS XXS 6” 8” 12” 44mm A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr ASME B36.19M, NACE 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note MR0175/ISO15156. 6) , NACE MR0175/ISO15156. Butt Weld Fittings: (Note1) Elbow, Tee, A403 Gr. WP 316L, BW, ASME B16.9, A403 Reducer NACE MR0175/ISO15156. MR0175/ISO15156. Cap 10” 23mm 30mm 37mm A312 TP316L SMLS, BE, Fittings Weldolet Design code ASME B31.3 Size Material 2500 A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. - Gr. WP 316L, BW, ASME B16.9, NACE A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. A182 F316L, BW, ASME B16.9, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A182 F316L, CL 2500, RTJ,ASME B16.48, NACE MR0175/ISO15156. (Note11,12) A182 F316L, CL 2500, Flange(Note11) WN-RTJ, ASME B16.5(Note1) , NACE MR0175/ISO15156. Blind Flange(Note11) Valves(Note11) A182 F316L, CL 2500, WN-RTJ, ASME B16.5 (Note1) , NACE MR0175/ISO15156. A182 F316L, CL 2500, RTJ,ASME B16.5, NACE MR0175/ISO15156. ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG2CJRIV / BG2CBIV/ BG2CWIV BG2CJRIV / BG2CJFIV Check Valve CG2CJPV CG2CJWV/ CG2CJSV Gate Valve GG2CJV / GG2CBV GG2CJV Globe Valve LG2CJV LG2CJV Needle Valve NG2CWV/ NG2CBV Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 254 205. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G2SA0N Service To be specified Material Stainless Steel(NACE MR0175/ISO15156) ASME B16.5 Pressure Class Piping Class: G2SA0N (note3) NDT Refer to Specification of Piping Inspection Corrosion Allowance: 2500 0 Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature(℃) -29 38 150 Design Pressure (kPaG) 25200 25200 25200 Design code ASME B31.3 Size 1/2"-1" 1 1/2” 2”-3” 4”-6” 8” 10” 12” Pipe THK SCH 80S SCH160 SCH160 XXS 26mm 32mm 38mm Material A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L A312 TP316L SMLS, BE, ASME B36.19M, NACE MR0175/ISO15156. Fittings Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) , NACE MR0175/ISO15156. Butt Weld Fittings: (Note1) Elbow, Tee, A403 Gr. WP 316L, BW, ASME B16.9, NACE A403 Reducer MR0175/ISO15156. Weldolet Cap A182 F316L, Gr. WP 316L, BW, ASME B16.9, NACE MR0175/ISO15156. BW, MSS-SP-97, NACE MR0175/ISO15156. - A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. A182 F316L, BW, ASME B16.9, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A182 F316L, CL 2500, RTJ,ASME B16.48, NACE MR0175/ISO15156. (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) Ball Valve A182 F316L, CL 2500,WN-RTJ, ASME A182 F316L, CL 2500, WN-RTJ, ASME B16.5 (Note1) , B16.5(Note1) , NACE MR0175/ISO15156. NACE MR0175/ISO15156. A182 F316L, CL 2500, RTJ,ASME B16.5, NACE MR0175/ISO15156. ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG2CJRIV / BG2CBIV/ BG2CWIV BG2CJRIV / BG2CJFIV Check Valve CG2CJPV CG2CJWV/ CG2CJSV Gate Valve GG2CJV / GG2CBV GG2CJV Globe Valve LG2CJV LG2CJV Needle Valve NG2CWV/ NG2CBV Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 255 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 206. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G0SA0O Service To be specified Piping Class: G0SA0O (note3) Material Stainless Steel (NACE MR0175/ISO15156) ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection Corrosion Allowance: 2500 0 Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature(℃) -101 38 50 100 150 Design Pressure (kPaG) 34470 34470 33350 28990 26160 Size 1/2"-1" 1 1/2” 2” 3” 4” Pipe THK SCH 160 XXS XXS XXS 18mm Material 6” 8” 10” 12” 26mm 34mm 42mm 50mm A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L ASME B36.10M, NACE Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) , MR0175/ISO15156. NACE MR0175/ISO15156. Butt Weld Fittings: (Note1) Elbow, Tee, A403 Gr. WP 316L, BW, ASME B16.9, A403 Reducer NACE MR0175/ISO15156. MR0175/ISO15156. Cap ASME B31.3 A312 TP316L SMLS, BE, Fittings Weldolet Design code A182F316L,BW, MSS-SP-97,NACEMR0175/ISO15156. - Gr. WP 316L, BW, ASME B16.9, NACE A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. A182 F316L, BW, ASME B16.9, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A182 F316L, CL 2500, RTJ,ASME B16.48, NACE MR0175/ISO15156. (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F316L, CL 2500,WN-RTJ,ASME A182 F316L, CL 2500, WN-RTJ, ASME B16.5 (Note1) , B16.5(Note1),NACE MR0175/ISO15156. NACE MR0175/ISO15156. A182 F316L, CL 2500, RTJ,ASME B16.5, NACE MR0175/ISO15156. ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG2CJRZIV / BG2CBZIV/ BG2CWZIV BG2CJRZIV / BG2CJFZIV Check Valve CG2CJPZV CG2CJWZV/ CG2CJSZV Gate Valve GG2CJZV / GG2CBZV GG2CJZV Globe Valve LG2CJZV LG2CJZV Needle Valve NG2CWZV/NG2CBZV Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test for materials of this spec. shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 256 207. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G1SA0O Service To be specified Material Stainless Steel(NACE MR0175/ISO15156) ASME B16.5 Pressure Class Piping Class: G1SA0O (note3) NDT Refer to Specification of Piping Inspection Corrosion Allowance: 2500 0 Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature(℃) -101 38 150 Design Pressure (kPaG) 29800 29800 26160 Design code ASME B31.3 Size 1/2"-1" 1 1/2” 2” 3” 4” 6” 8” 10” 12” Pipe THK SCH 80S XXS XXS XXS XXS 23mm 30mm 37mm 44mm Material A312 TP316L SMLS, BE, A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L ASME B36.19M, NACE Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) , NACE MR0175/ISO15156. MR0175/ISO15156. Fittings Butt Weld Fittings: (Note1) Elbow, Tee, A403 Gr. WP 316L, BW, ASME B16.9, A403 Reducer NACE MR0175/ISO15156. Weldolet Cap Plug A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. Gr. WP 316L, BW, ASME B16.9, NACE MR0175/ISO15156. A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. - A182 F316L, BW, ASME B16.9, NACE MR0175/ISO15156. A182 F316L, NPT, ASME B16.11, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A182 F316L, CL 2500, RTJ, ASME B16.48, NACE MR0175/ISO15156. (Note11,12) A182 F316L, CL 2500, Flange(Note11) WN-RTJ, ASME B16.5(Note1) , NACE MR0175/ISO15156. Blind Flange(Note11) Valves(Note11) A182 F316L, CL 2500, WN-RTJ, ASME B16.5 (Note1), NACE MR0175/ISO15156. A182 F316L, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156. ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG2CJRZIV / BG2CBZIV/ BG2CWZIV BG2CJRZIV / BG2CJFZIV Check Valve CG2CJPZV CG2CJWZV/ CG2CJSZV Gate Valve GG2CJZV / GG2CBZV GG2CJZV Globe Valve LG2CJZV LG2CJZV Needle Valve NG2CWZV/ NG2CBZV Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test for materials of this spec. shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 257 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 208. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G2SA0O Service To be specified Piping Class: G2SA0O (Note3) Material Stainless Steel(NACE MR0175/ISO15156) ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection Corrosion Allowance: 2500 0 Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature(℃) -101 38 150 Design Pressure (kPaG) 25200 25200 25200 Design code ASME B31.3 Size 1/2"-1" 1 1/2” 2”-3” 4”-6” 8” 10” 12” Pipe THK SCH 80S SCH160 SCH160 XXS 26mm 32mm 38mm Material A312 TP316L SMLS, BE, A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L ASME B36.10M, NACE Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) , MR0175/ISO15156. NACE MR0175/ISO15156. Fittings Butt Weld Fittings: (Note1) Elbow, Tee, A403 Gr. WP 316L, BW, ASME B16.9, A403 Reducer NACE MR0175/ISO15156. MR0175/ISO15156. Weldolet Cap Plug A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. - Gr. WP 316L, BW, ASME B16.9, NACE A182 F316L, BW, MSS-SP-97, NACE MR0175/ISO15156. A182 F316L, BW, ASME B16.9, NACE MR0175/ISO15156. A182 F316L, NPT,ASME B16.11, NACE MR0175/ISO15156. Spectacle Blind, Spacer & Blanks A182 F316L, CL 2500, RTJ,ASME B16.48, NACE MR0175/ISO15156. (Note11,12) A182 F316L, CL 2500, Flange(Note11) WN-RTJ, ASME B16.5(Note1) , NACE MR0175/ISO15156. Blind Flange(Note11) Valves(Note11) Ball Valve A182 F316L, CL 2500, WN-RTJ, ASME B16.5 (Note1) , NACE MR0175/ISO15156. A182 F316L, CL 2500, RTJ,ASME B16.5, NACE MR0175/ISO15156. ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG2CJRZIV / BG2CBZIV/ BG2CWZIV BG2CJRZIV / BG2CJFZIV Check Valve CG2CJPZV CG2CJWZV/ CG2CJSZV Gate Valve GG2CJZV / GG2CBZV GG2CJZV Globe Valve LG2CJZV LG2CJZV Needle Valve NG2CWZV/ NG2CBZV Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max. hardness is 160HB) ASTM A320 Gr.L7 Stud Bolt / A194 Gr.7L HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with green color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (5) Low Temperature Toughness Test for materials of this spec. shall be performed as per requirements of ASME B31.3. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 258 209. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G0SA0Z Service To be specified Piping Class: Material Stainless Steel ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection G0SA0Z 2500 Corrosion Allowance: 0 Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature(℃) -29 38 50 100 150 Design Pressure (kPaG) 34470 34470 33350 28990 26160 Size 1/2"-1" 1 1/2” 2” 3” 4” Pipe THK SCH 160 XXS XXS XXS 18mm Material Reducer 10” 12” 26mm 34mm 42mm 6” 8” 50mm A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L Class1, ASME B36.19M WELDED(≥16”), BE, ASME B36.19M.(Note 6) Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A403 Gr. WP 316L, BW, ASME B16.9 Weldolet A182 F316L, BW, MSS-SP-97 A182 F316L, BW, MSS-SP-97 Cap - A182 F316L, BW, ASME B16.9 Plug ASME B31.3 A312 TP316L SMLS, BE, Fittings Elbow, Tee, Design code A182 F316L, NPT, ASME B16.11 Spectacle Blind, Spacer & Blanks A182 F316L, CL 2500, RTJ,ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F316L, CL 2500, WN-RTJ,ASME B16.5(Note1) A182 F316L, CL 2500, WN-RTJ, ASME B16.5 (Note1)- A182 F316L, CL 2500, RTJ,ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG2CJRI / BG2CBI/ BG2CWI BG2CJRI / BG2CJFI Check Valve CG2CJP CG2CJW/ CG2CJS Gate Valve GG2CJ / GG2CB GG2CJ Globe Valve LG2CJ LG2CJ Needle Valve NG2CW/ NG2CB Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 259 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 210. ATTACHMENT B Service Material NDT PIPING SYSTEM SPECIFICATIONS G1SA0Z To be specified Piping Class: Stainless Steel ASME B16.5 Pressure Class Refer to Specification of Piping Inspection G1SA0Z 2500 Corrosion Allowance: 0 Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature(℃) -29 38 150 Design Pressure (kPaG) 29800 29800 26160 ASME B31.3 Size 1/2"-1" 1 1/2” 2” 3” 4” Pipe THK SCH80S XXS XXS XXS XXS Material Reducer 10” 12” 23mm 30mm 37mm 6” 8” 44mm A312 TP316L SMLS, BE, A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr ASME B36.19M 316L Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) Fittings Elbow, Tee, Design code Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A403 Gr. WP 316L, BW, ASME B16.9 Weldolet A182 F316L, BW, MSS-SP-97 A182 F316L, BW, MSS-SP-97 Cap - A182 F316L, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A182 F316L, CL 2500, RTJ,ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F316L, CL 2500, WN-RTJ, ASME B16.5(Note1) A182 F316L, CL 2500, WN-RTJ, ASME B16.5 (Note1)- A182 F316L, CL 2500, RTJ,ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG2CJRI / BG2CBI/ BG2CWI BG2CJRI / BG2CJFI Check Valve CG2CJP CG2CJW/ CG2CJS Gate Valve GG2CJ / GG2CB GG2CJ Globe Valve LG2CJ LG2CJ Needle Valve NG2CW/ NG2CB Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 260 211. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G2SA0Z Service To be specified Piping Class: Material Stainless Steel ASME B16.5 Pressure Class NDT Refer to Specification of Piping Inspection G2SA0Z 2500 Corrosion Allowance: 0 Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature(℃) -29 38 150 Design Pressure (kPaG) 25200 25200 25200 Design code ASME B31.3 Size 1/2"-1" 1 1/2” 2”-3” 4”-6” 8” 10” 12” Pipe THK SCH 80S SCH160 SCH160 XXS 26mm 32mm 38mm Material A312 TP316L SMLS, BE, A312 TP316L SMLS, BE, ASME B36.19M. Or A358 Gr 316L ASME B36.19M Class1, WELDED(≥16”), BE, ASME B36.19M.(Note 6) Fittings Elbow, Tee, Butt Weld Fittings: (Note1) A403 Gr. WP 316L, BW, ASME B16.9 A403 Gr. WP 316L, BW, ASME B16.9 Weldolet A182 F316L, BW, MSS-SP-97 A182 F316L, BW, MSS-SP-97 Cap - A182 F316L, BW, ASME B16.9 Reducer Spectacle Blind, Spacer & Blanks A182 F316L, CL 2500, RTJ,ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) Ball Valve A182 F316L, CL 2500, WN-RTJ, ASME B16.5(Note1) A182 F316L, CL 2500, WN-RTJ, ASME B16.5 (Note1) A182 F316L, CL 2500, RTJ,ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 BG2CJRI / BG2CBI/ BG2CWI BG2CJRI / BG2CJFI Check Valve CG2CJP CG2CJW/ CG2CJS Gate Valve GG2CJ / GG2CB GG2CJ Globe Valve LG2CJ LG2CJ Needle Valve NG2CW/ NG2CB Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 261 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 212. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G0SI0N Service To be specified Material Duplex Stainless Steel(NACE MR0175/ISO15156) NDT Piping Class: Refer to Specification of Piping Inspection G0SI0N(Note3) ASME B16.5 Pressure Class 2500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design code Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 43090 43090 42220 38270 Size 1/2"-1 1/2" 2"-4" 6" 8" 10" 12” Pipe THK SCH 160 SCH 160 XXS 26mm 32mm 36mm ASME B31.3 A928 UNS S31803 WELDED, BE, Material A790 UNS S31803 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 ASME B36.10M, NACE MR0175/ISO15156 (Note6) Fittings Elbow, Tee, Reducer Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 Weldolet A182 F51, BW, MSS-SP-97, NACE MR0175/ISO15156 Cap A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A182 F51, CL 2500, Female Ring Joint, ASME B16.48, NACE MR0175/ISO15156 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) Ball Valve A182 F51, CL 2500, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 (Note1) A182 F51, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156 ASME B16.34 CL 2500 BG8EJRIV/BG8EBRIV/ BG8EWRIV/BG8EJFIV ASME B16.34 CL 2500 BG8EJFIV/BG8EJRIV Check Valve CG8EJPV/CG8EBPV/CG8EWPV CG8EJWV / CG8EJSV Gate Valve GG8EJV/GG8EBV GG8EJV Globe Valve LG8EJV/LG8EBV/LG8EWV LG8EJV Needle Valve NG8EJV/NG8EBV/NG8EWV Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max.hardness is 160HB) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 262 213. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G1SI0N Service To be specified Material Duplex Stainless Steel(NACE MR0175/ISO15156) NDT Piping Class: Refer to Specification of Piping Inspection G1SI0N(Note3) ASME B16.5 Pressure Class 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 37300 37300 1/2"-1" 1 1/2" 2"-8" Pipe THK SCH 80S SCH 160 SCH 160 A790 UNS S31803 SMLS, BE, Reducer ASME B36.10M, 10"-12” SCH 160 NACE MR0175/ISO15156 A928 UNS S31803 WELDED, BE, ASME B36.10M, NACE MR0175/ISO15156 (Note6) Butt Weld Fittings: (Note1) Fittings Elbow, Tee, Design code ASME B31.3 Size Material 2500 Corrosion Allowance: Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 Weldolet A182 F51, BW, MSS-SP-97, NACE MR0175/ISO15156 Cap A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A182 F51, CL 2500, Female Ring Joint, ASME B16.48, NACE MR0175/ISO15156 (Note11,12) Flange(Note11) A182 F51, CL 2500, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 (Note1) Blind Flange(Note11) A182 F51, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156 Valves(Note11) Ball Valve ASME B16.34 CL 2500 BG8EJRIV/BG8EBRIV/ BG8EWRIV/BG8EJFIV ASME B16.34 CL 2500 BG8EJFIV/BG8EJRIV Check Valve CG8EJPV/CG8EBPV/CG8EWPV CG8EJWV / CG8EJSV Gate Valve GG8EJV/GG8EBV GG8EJV Globe Valve LG8EJV/LG8EBV/LG8EWV LG8EJV Needle Valve NG8EJV/NG8EBV/NG8EWV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max.hardness is 160HB) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 263 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 214. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G2SI0N Service To be specified Material Duplex Stainless Steel(NACE MR0175/ISO15156) NDT Piping Class: Refer to Specification of Piping Inspection G2SI0N(Note3) ASME B16.5 Pressure Class Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 31600 31600 2500 Corrosion Allowance: 0mm Design code ASME B31.3 Size 1/2"-1 1/2" 2"-3" 4" Pipe THK SCH80S SCH160 SCH120 6" 8" 10"-12” SCH160 SCH140 SCH140 A928 UNS S31803 WELDED, BE, Material A790 UNS S31803 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 ASME B36.10M, NACE MR0175/ISO15156 (Note6) Fittings Elbow, Tee, Reducer Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 Weldolet A182 F51, BW, MSS-SP-97, NACE MR0175/ISO15156 Cap A815 UNS S31803, BW, ASME B16.9, NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A182 F51, CL 2500, Female Ring Joint, ASME B16.48, NACE MR0175/ISO15156 (Note11,12) Flange (Note11) Blind Flange (Note11) Valves (Note11) Ball Valve A182 F51, CL 2500, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 (Note1) A182 F51, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156 ASME B16.34 CL 2500 BG8EJRIV/BG8EBRIV/ BG8EWRIV/BG8EJFIV ASME B16.34 CL 2500 BG8EJFIV/BG8EJRIV Check Valve CG8EJPV/CG8EBPV/CG8EWPV CG8EJWV / CG8EJSV Gate Valve GG8EJV/GG8EBV GG8EJV Globe Valve LG8EJV/LG8EBV/LG8EWV LG8EJV Needle Valve NG8EJV/NG8EBV/NG8EWV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max.hardness is 160HB) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 264 215. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G0SI0Z Service To be specified Material Duplex Stainless Steel NDT Refer to Specification of Piping Inspection Piping Class: G0SI0Z ASME B16.5 Pressure Class 2500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 43090 43090 42220 38270 ASME B31.3 Size 1/2"-1" 1 1/2" 2"-4" 6" 8" Pipe THK SCH 160 SCH 160 SCH 160 XXS 26mm Material Elbow, Tee, Reducer 10" 12” 32mm 36mm A928 UNS S31803, WELDED, BE, A790 UNS S31803, SMLS, BE, ASME B36.10M Fittings Design code ASME B36.10M (Note6) Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9 Weldolet A182 F51, BW, MSS-SP-97 Cap A815 UNS S31803, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A182 F51, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) A182 F51, CL 2500, WN-RTJ, ASME B16.5 (Note1) Blind Flange(Note11) A182 F51, CL 2500, RTJ, ASME B16.5 Valves(Note11) Ball Valve ASME B16.34 CL 2500 BG8EJRI/BG8EBRI/ BG8EWRI/BG8EJFI ASME B16.34 CL 2500 BG8EJFI/BG8EJRI Check Valve CG8EJP/CG8EBP/CG8EWP CG8EJW / CG8EJS Gate Valve GG8EJ/GG8EB GG8EJ Globe Valve LG8EJ/LG8EB/LG8EW LG8EJ Needle Valve NG8EJ/NG8EB/NG8EW - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 265 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 216. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G1SI0Z To be specified Material Piping Class: Duplex Stainless Steel NDT Refer to Specification of Piping Inspection G1SI0Z ASME B16.5 Pressure Class 2500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 37300 37300 Design code ASME B31.3 Size 1/2"-1" 1 1/2" 2"-8" 10" 12” Pipe THK SCH 80S SCH 160 SCH 160 SCH 160 SCH160 Material A790 UNS S31803, SMLS, BE, ASME B36.10M Fittings Elbow, Tee, Reducer A928 UNS S31803, WELDED, BE, ASME B36.10M (Note6) Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9 Weldolet A182 F51, BW, MSS-SP-97 Cap A815 UNS S31803, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A182 F51, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) Ball Valve A182 F51, CL 2500, WN-RTJ, ASME B16.5 (Note1) A182 F51, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 BG8EJRI/BG8EBRI/ BG8EWRI/BG8EJFI ASME B16.34 CL 2500 BG8EJFI/BG8EJRI Check Valve CG8EJP/CG8EBP/CG8EWP CG8EJW / CG8EJS Gate Valve GG8EJ/GG8EB GG8EJ Globe Valve LG8EJ/LG8EB/LG8EW LG8EJ Needle Valve NG8EJ/NG8EB/NG8EW - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 266 217. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G2SI0Z Service To be specified Material Duplex Stainless Steel NDT Refer to Specification of Piping Inspection Piping Class: G2SI0Z ASME B16.5 Pressure Class 2500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 31600 31600 Size 1/2"-1 1/2" Pipe THK SCH80S Design code ASME B31.3 2"-3" 4" SCH160 SCH120 6" 8" SCH160 SCH140 10"-12” SCH140 A928 UNS S31803, Material A790 UNS S31803, SMLS, BE, ASME B36.10M WELDED, BE, ASME B36.10M (Note6) Fittings Elbow, Tee, Reducer Butt Weld Fittings: (Note1) A815 UNS S31803, BW, ASME B16.9 Weldolet A182 F51, BW, MSS-SP-97 Cap A815 UNS S31803, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A182 F51, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) Ball Valve A182 F51, CL 2500, WN-RTJ, ASME B16.5 (Note1) A182 F51, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 BG8EJRI/BG8EBRI/ BG8EWRI/BG8EJFI ASME B16.34 CL 2500 BG8EJFI/BG8EJRI Check Valve CG8EJP/CG8EBP/CG8EWP CG8EJW / CG8EJS Gate Valve GG8EJ/GG8EB GG8EJ Globe Valve LG8EJ/LG8EB/LG8EW LG8EJ Needle Valve NG8EJ/NG8EB/NG8EW - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 267 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 218. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G0SK0N Service To be specified Material Duplex Stainless Steel(NACE MR0175/ISO15156) NDT Piping Class: G0SK0N(Note3) ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 2500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 43090 43090 42220 38270 Design code ASME B31.3 Size 1/2"-1" 1 1/2" 2" 3"-6" 8" 10" 12” Pipe THK SCH 160 SCH 160 SCH 160 SCH 160 XXS XXS SCH140 Material Reducer ASME B36.10M, NACE MR0175/ISO15156 Fittings Elbow, Tee, A928 UNS S32750 WELDED, BE, A790 UNS S32750 SMLS, BE, ASME B36.10M, NACE MR0175/ISO15156 (Note6 Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 Weldolet A182 F53, BW, MSS-SP-97, NACE MR0175/ISO15156 Cap A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A182 F53, CL 2500, Female Ring Joint, ASME B16.48, NACE MR0175/ISO15156 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) Ball Valve Check Valve A182 F53, CL 2500, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 (Note1) A182 F53, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156 ASME B16.34 CL 2500 BG10PJRIV/BG10PBRIV/ BG10PWRIV/BG10PJFIV CG10PJPV/CG10PBPV/ CG10PWPV ASME B16.34 CL 2500 BG10PJFIV/BG10PJRIV CG10PJWV / CG10PJSV Gate Valve GG10PJV/GG10PBV GG10PJV Globe Valve LG10PJV/LG10PBV/LG10PWV LG10PJV Needle Valve NG10PJV/NG10PBV/NG10PWV Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max.hardness is 160HB) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 268 219. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G1SK0N Service To be specified Material Duplex Stainless Steel(NACE MR0175/ISO15156) NDT Piping Class: G1SK0N(Note3) ASME B16.5 Pressure Class Refer to Specification of Piping Inspection Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 37300 37300 Size Pipe THK Material Reducer 0mm Design code ASME B31.3 1/2"-1" 1 1/2" 2"-6" 8” 10" 12” SCH 80S SCH 80S SCH 160 XXS XXS SCH140 A790 UNS S32750 SMLS, BE, ASME B36.10M, NACE A928 UNS S32750 WELDED, BE, ASME MR0175/ISO15156 Fittings Elbow, Tee, 2500 Corrosion Allowance: B36.10M, NACE MR0175/ISO15156 (Note6) Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 Weldolet A182 F53, BW, MSS-SP-97, NACE MR0175/ISO15156 Cap A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A182 F53, CL 2500, Female Ring Joint, ASME B16.48, NACE MR0175/ISO15156 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) Ball Valve Check Valve A182 F53, CL 2500, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 (Note1) A182 F53, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156 ASME B16.34 CL 2500 BG10PJRIV/BG10PBRIV/ BG10PWRIV/BG10PJFIV CG10PJPV/CG10PBPV/ CG10PWPV ASME B16.34 CL 2500 BG10PJFIV/BG10PJRIV CG10PJWV / CG10PJSV Gate Valve GG10PJV/GG10PBV GG10PJV Globe Valve LG10PJV/LG10PBV/LG10PWV LG10PJV Needle Valve NG10PJV/NG10PBV/NG10PWV - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max.hardness is 160HB) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 269 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 220. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G2SK0N Service To be specified Material Duplex Stainless Steel(NACE MR0175/ISO15156) NDT Piping Class: G2SK0N(Note3) ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 2500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 31600 31600 Design code ASME B31.3 Size 1/2"-1 1/2" 2"-3" 4"-8" 10"-12” Pipe THK SCH 80S SCH 160 SCH 120 SCH 120 Material A790 UNS S32750 SMLS, BE, Reducer B36.10M, NACE MR0175/ISO15156 Fittings Elbow, Tee, ASME A928 UNS S32750 WELDED, BE, ASME B36.10M, NACE MR0175/ISO15156 (Note6) Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 Weldolet A182 F53, BW, MSS-SP-97, NACE MR0175/ISO15156 Cap A815 UNS S32750, BW, ASME B16.9, NACE MR0175/ISO15156 Spectacle Blind, Spacer & Blanks A182 F53, CL 2500, Female Ring Joint, ASME B16.48, NACE MR0175/ISO15156 (Note11,12) Flange(Note11) Blind Flange (Note11) Valves(Note11) Ball Valve Check Valve A182 F53, CL 2500, WN-RTJ, ASME B16.5, NACE MR0175/ISO15156 (Note1) A182 F53, CL 2500, RTJ, ASME B16.5, NACE MR0175/ISO15156 ASME B16.34 CL 2500 BG10PJRIV/BG10PBRIV/ BG10PWRIV/BG10PJFIV CG10PJPV/CG10PBPV/ CG10PWPV ASME B16.34 CL 2500 BG10PJFIV/BG10PJRIV CG10PJWV / CG10PJSV Gate Valve GG10PJV/GG10PBV GG10PJV Globe Valve LG10PJV/LG10PBV/LG10PWV LG10PJV Needle Valve NG10PJV/NG10PBV/NG10PWV Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, NACE MR0175/ISO15156, ASME B16.20 (Max.hardness is 160HB) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (3) All materials shall comply with NACE MR0175/ISO15156. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 270 221. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G0SK0Z Service To be specified Material Super Duplex Stainless Steel NDT Piping Class: G0SK0Z ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 50 100 150 Design Pressure (kPaG) 43090 43090 42220 38270 1/2"-1" 1 1/2" 2"-6" 8" Pipe THK SCH 160 SCH 160 SCH 160 XXS A790 UNS S32750, SMLS, BE, ASME B36.10M Fittings Elbow, Tee, Reducer Design code ASME B31.3 Size Material 2500 Corrosion Allowance: 10" 12” XXS SCH140 A928 UNS S32750, WELDED, BE, ASME B36.10M (Note6) Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9 Weldolet A182 F53, BW, MSS-SP-97 Cap A815 UNS S32750, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A182 F53, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F53, CL 2500, WN-RTJ, ASME B16.5 (Note1) A182 F53, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG10PJRI/BG10PBRI/BG10PWRI BG10PJFI/BG10PJRI Check Valve CG10PJP/CG10PBP/CG10PWP CG10PJW / CG10PJS Gate Valve GG10PJ/GG10PB GG10PJ Globe Valve LG10PJ/LG10PB/LG10PW LG10PJ Needle Valve NG10PJ/NG10PB/NG10PW - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 271 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 222. ATTACHMENT B Service PIPING SYSTEM SPECIFICATIONS G1SK0Z To be specified Material Piping Class: Super Duplex Stainless Steel NDT G1SK0Z ASME B16.5 Pressure Class Refer to Specification of Piping Inspection 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 37300 37300 2500 Corrosion Allowance: Design code ASME B31.3 Size 1/2"-1" 1 1/2" 2"-6" 8” 10" 12” Pipe THK SCH 80S SCH 80S SCH 160 XXS XXS SCH140 Material A790 UNS S32750, SMLS, BE, ASME B36.10M Fittings Elbow, Tee, Reducer A928 UNS S32750, WELDED, BE, ASME B36.10M (Note6) Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9 Weldolet A182 F53, BW, MSS-SP-97 Cap A815 UNS S32750, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A182 F53, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) A182 F53, CL 2500, WN-RTJ, ASME B16.5 (Note1) Blind Flange(Note11) A182 F53, CL 2500, RTJ, ASME B16.5 Valves(Note11) ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG10PJRI/BG10PBRI/BG10PWRI BG10PJFI/BG10PJRI Check Valve CG10PJP/CG10PBP/CG10PWP CG10PJW / CG10PJS Gate Valve GG10PJ/GG10PB GG10PJ Globe Valve LG10PJ/LG10PB/LG10PW LG10PJ Needle Valve NG10PJ/NG10PB/NG10PW - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 272 223. ATTACHMENT B PIPING SYSTEM SPECIFICATIONS G2SK0Z Service To be specified Material Super Duplex Stainless Steel NDT Piping Class: Refer to Specification of Piping Inspection G2SK0Z ASME B16.5 Pressure Class 2500 Corrosion Allowance: 0mm Design Pressure at Indicated Temperature(Permissible As Per ASME B16.5) Design Temperature (℃) 38 150 Design Pressure (kPaG) 31600 31600 ASME B31.3 Size 1/2"-1 1/2" 2"-3" 4"-8" Pipe THK SCH 80S SCH 160 SCH 120 Material A790 UNS S32750, SMLS, BE, ASME B36.10M Fittings Elbow, Tee, Reducer Design code 10"-12” SCH 120 A928 UNS S32750, WELDED, BE, ASME B36.10M (Note6) Butt Weld Fittings: (Note1) A815 UNS S32750, BW, ASME B16.9 Weldolet A182 F53, BW, MSS-SP-97 Cap A815 UNS S32750, BW, ASME B16.9 Spectacle Blind, Spacer & Blanks A182 F53, CL 2500, RTJ, ASME B16.48 (Note11,12) Flange(Note11) Blind Flange(Note11) Valves(Note11) A182 F53, CL 2500, WN-RTJ, ASME B16.5 (Note1) A182 F53, CL 2500, RTJ, ASME B16.5 ASME B16.34 CL 2500 ASME B16.34 CL 2500 Ball Valve BG10PJRI/BG10PBRI/BG10PWRI BG10PJFI/BG10PJRI Check Valve CG10PJP/CG10PBP/CG10PWP CG10PJW / CG10PJS Gate Valve GG10PJ/GG10PB GG10PJ Globe Valve LG10PJ/LG10PB/LG10PW LG10PJ Needle Valve NG10PJ/NG10PB/NG10PW - Gasket Bolt/Nuts 316L Octagonal Ring, CL 2500, ASME B16.20 (Max. hardness is 160BHN) ASTM A193 Gr.B7 Stud Bolt / A194 Gr.2H HVY. HEX. S.F Nuts, GALV. plus PTFE Fluoropolymer Coating with blue color. (Note4) Notes: (1) Wall thickness of fitting and flange shall match pipe thickness. (2) NPT connection could only be used for connection with instrument. (4) The detail series of PTFE Fluoropolymer shall be recommended by vendor, and shall meet the design temperature. (6) Pipe shall be welded by processes using filler metal in all pass and shall be radiographed completely. 273 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 ATTACHMENT C BRANCH CONNECTION FOR PIPING CLASS: 1 A0CA3P 2 A0CA3E 3 4 5 6 7 8 9 10 BRANCH SIZE,INCH (NPS) HEADER SIZE, INCH(NPS) 1/2" 3/4" 1" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 34" 36" 38" 40" 42" 44" 1/2" - 3/4" - - 1" - - - 1 1/2" - - - - 2" - - - - T 3" - - - - RTE 4" - - - - RTE RTE 6" - - - - WOL RTE RTE 8" - - - - WOL WOL RTE RTE 10" - - - - WOL WOL RTE RTE RTE 12" - - - - WOL WOL WOL RTE RTE RTE 14" - - - - WOL WOL WOL WOL RTE RTE RTE 16" - - - - WOL WOL WOL WOL RTE RTE RTE RTE 18" - - - - WOL WOL WOL WOL WOL RTE RTE RTE RTE 20" - - - - WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE 24" - - - - WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE T 26” - - - - WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE T 28" - - - - WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE T 30” - - - - WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE 32" - - - - WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE 34” - - - - WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE 36" - - - - WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE RTE 38" - - - - WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE RTE 40" - - - - WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE RTE RTE 42" - - - - WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE RTE RTE RTE 44" - - - - WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE RTE RTE RTE 46" - - - - WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE RTE RTE RTE 48" - - - - WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE RTE RTE RTE RTE 1" 1 1/2" 2" 24" 26" 28" 1/2" 3/4" T 3" T 4" T 6" T 8" T 10" T 12" T 14" T 16" T 18" T 20" T 30" T 32" T 34" T 36" T 38" T 40" T 42" T 44" LEGEND: T Equal Tee RTE Reducing Tee SOL Socketolet WOL Weldolet Using of weldolets for branch above NPS 8 shall be cautious due to the risk of welding 274 46" 48" T T 46" 48" thermal distortion. Sweepolet or reducing tee plus reducer could be used instead. 275 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 FOR PIPING CLASS: 1 A0CA2G 2 3 4 5 6 7 8 9 10 BRANCH SIZE,INCH (NPS) HEADER SIZE, INCH(NPS) 1/2" 3/4" 1" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 1/2" T 3/4" RTE T 1" RTE RTE T 1 1/2" RTE RTE RTE T 2" RTE RTE RTE RTE T 3" TOL TOL TOL TOL RTE T 4" TOL TOL TOL TOL RTE RTE T 6" TOL TOL TOL TOL TOL RTE RTE T 8" TOL TOL TOL TOL TOL WOL RTE RTE T 10" TOL TOL TOL TOL TOL WOL RTE RTE RTE T 12" TOL TOL TOL TOL TOL WOL WOL RTE RTE RTE T 14" TOL TOL TOL TOL TOL WOL WOL WOL RTE RTE RTE T 16" TOL TOL TOL TOL TOL WOL WOL WOL RTE RTE RTE RTE T 18" TOL TOL TOL TOL TOL WOL WOL WOL WOL RTE RTE RTE RTE T 20" TOL TOL TOL TOL TOL WOL WOL WOL WOL RTE RTE RTE RTE RTE T 24" TOL TOL TOL TOL TOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE T 1/2" 3/4" 1" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" LEGEND: T Equal Tee RTE Reducing Tee TOL Threadolet WOL Weldolet Using of weldolets for branch above NPS 8 shall be cautious due to the risk of welding thermal distortion. Sweepolet or reducing tee plus reducer could be used instead. 276 FOR PIPING CLASS: 1 A0CA3Z (Only DO System) 2 3 4 5 6 7 8 9 10 BRANCH SIZE,INCH (NPS) HEADER SIZE,INCH (NPS) 1/2" 3/4" 1" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 22" 24" 1/2" T 3/4" RTE T 1" RTE RTE T 1 1/2" RTE RTE RTE T 2" SOL SOL SOL RTE T 3" SOL SOL SOL SOL SI T 4" SOL SOL SOL SOL SI SI T 6" SOL SOL SOL SOL SI SI SI T 8" SOL SOL SOL SOL SI SI SI SI T 10" SOL SOL SOL SOL SI SI SI SI SI T 12" SOL SOL SOL SOL SI SI SI SI SI SI T 14" SOL SOL SOL SOL SI SI SI SI SI SI SI T 16" SOL SOL SOL SOL SI SI SI SI SI SI SI SI T 18" SOL SOL SOL SOL SI SI SI SI SI SI SI SI SI T 20" SOL SOL SOL SOL SI SI SI SI SI SI SI SI SI SI T 22" SOL SOL SOL SOL SI SI SI SI SI SI SI SI SI SI SI T 24" SOL SOL SOL SOL SI SI SI SI SI SI SI SI SI SI SI SI T 1/2" 3/4" 1" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 22" 24" LEGEND: T Equal Tee RTE Reducing Tee SOL Socketolet SI Stub-In 277 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 FOR PIPING CLASS: 1 A1BA1Z 2 A2BA1Z 3 4 5 6 7 8 9 10 BRANCH SIZE,INCH (NPS) 1/2" 3/4" 1" 1 1/2" 2" 3" 4" 6" 8" T 3/4" RTE T 1" RTE RTE T 1 1/2" RTE RTE RTE T 2" SOL SOL SOL/RTE RTE T 3" SOL SOL SOL RTE RTE T 4" SOL SOL SOL SOL RTE RTE T 6" SOL SOL SOL SOL WOL RTE RTE T RTE RTE T HEADER SIZE, INCH(NPS) 1/2" 10" 12" 14" 16" 8" SOL SOL SOL SOL WOL WOL 10" SOL SOL SOL SOL WOL WOL RTE RTE RTE T 12" SOL SOL SOL SOL WOL WOL WOL RTE RTE RTE T 14" SOL SOL SOL SOL WOL WOL WOL WOL RTE RTE RTE T WOL RTE RTE RTE T 18" 20" 24" 28" 32" 36" 16" SOL SOL SOL SOL WOL WOL WOL WOL 18" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL RTE RTE RTE T 20" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE T 24" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE T 28" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE T 32" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE T 36" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE T 1/2" 3/4" 1" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 28" 32" 36" LEGEND: T Equal Tee RTE Reducing Tee SOL Socketolet WOL Weldolet Note： When specified, thread branch fitting should be used. Using of weldolets for branch shall be cautious due to the risk of welding thermal distortion. Seamless saddle or reducing tee plus reducer could be used instead. 278 FOR PIPING CLASS: 1 A0CA3N A0SK0N B0CA2G B0SI0N D0CA2G D0SI0Z 2 A0CA3Z A0SK0Z B0CA3N B0SI0Z D0CA3N D0SK0N 3 A0AA3L 4 A0AA3O 5 A0SA0L 6 A0SA0O 7 A0SA0N 8 A0SA0Z 9 A0SI0N 10 A0SI0Z B0CA3Z B0SK0N D0CA3Z D0SK0Z B0CA3H B0SK0Z D0AA3L B0AA3L B0AA3O B0SA0L B0SA0O B0SA0N B0SA0Z D0AA3O D0SA0L D0SA0O D0SA0N D0SA0Z D0SI0N BRANCH SIZE,INCH (NPS) HEADER SIZE, INCH(NPS) 1/2" 3/4" 1" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 34" 36" 1/2" T 3/4" RTE T 1" RTE RTE T 1 1/2" RTE RTE RTE T 2" SOL SOL RTE RTE T 3" SOL SOL SOL SOL RTE T 4" SOL SOL SOL SOL RTE RTE T 6" SOL SOL SOL SOL WOL RTE RTE T 8" SOL SOL SOL SOL WOL WOL RTE RTE T 10" SOL SOL SOL SOL WOL WOL RTE RTE RTE T 12" SOL SOL SOL SOL WOL WOL WOL RTE RTE RTE T 14" SOL SOL SOL SOL WOL WOL WOL WOL RTE RTE RTE T 16" SOL SOL SOL SOL WOL WOL WOL WOL RTE RTE RTE RTE T 18" SOL SOL SOL SOL WOL WOL WOL WOL WOL RTE RTE RTE RTE T 20" SOL SOL SOL SOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE T 24" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE T 26" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE T 28" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE T 30" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE T 32” SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE T 34" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE T 36" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE RTE T 1/2" 3/4" 1" 1 1/2" 2" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 34" 36" 3" LEGEND: T Equal Tee RTE Reducing Tee SOL Socketolet WOL Weldolet Using of weldolets for branch above NPS 8 shall be cautious due to the risk of welding thermal distortion. Sweepolet or reducing tee plus reducer could be used instead. 279 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 FOR PIPING CLASS: 1 E0CF3N E0SA0N E0SK0N F0SA0L F1SA0Z F2SK0N F2CF3N 2 E1CF3N E1SA0N E1SK0N F1SA0L F2SA0Z F0SK0Z F2CF3Z 3 E0CF3Z E0SA0O E0SK0Z F2SA0L F0SI0N F1SK0Z 4 E1CF3Z E1SA0O E1SK0Z F0SA0N F1SI0N F2SK0Z 5 E0AA3L E0SA0Z 6 E1AA3L E1SA0Z 7 E0AA3O E0SI0N 8 E1AA3O E1SI0N 9 E0SA0L E0SI0Z 10 E1SA0L E1SI0Z F1SA0N F2SI0N F2SA0N F0SI0Z F0SA0O F1SI0Z F1SA0O F2SI0Z F2SA0O F0SK0N F0SA0Z F1SK0N BRANCH SIZE,INCH (NPS) HEADER SIZE, INCH(NPS) 1/2" 3/4" 1" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 34" 36" 1/2" T 3/4" RTE T 1" RTE RTE T 1 1/2" RTE RTE RTE T 2" SOL SOL RTE RTE T 3" SOL SOL SOL SOL RTE T 4" SOL SOL SOL SOL RTE RTE T 6" SOL SOL SOL SOL WOL RTE RTE T 8" SOL SOL SOL SOL WOL WOL RTE RTE T 10" SOL SOL SOL SOL WOL WOL RTE RTE RTE T 12" SOL SOL SOL SOL WOL WOL WOL RTE RTE RTE T 14" SOL SOL SOL SOL WOL WOL WOL WOL RTE RTE RTE T 16" SOL SOL SOL SOL WOL WOL WOL WOL RTE RTE RTE RTE T 18" SOL SOL SOL SOL WOL WOL WOL WOL WOL RTE RTE RTE RTE T 20" SOL SOL SOL SOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE T 24" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE T 26" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE T 28" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE T 30" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE T 32” SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE T 34" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE T 36" SOL SOL SOL SOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE RTE T 1/2" 3/4" 1" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 34" 36" LEGEND: T Equal Tee RTE Reducing Tee SOL Socketolet WOL Weldolet Using of weldolets for branch above NPS 8 shall be cautious due to the risk of welding thermal distortion. Sweepolet or reducing tee plus reducer could be used instead. 280 FOR PIPING CLASS: 1 A0CA6N B0CA6N D0CA6N E0CA3N E0CF6N F0CA3N F1CA6Z F0AA3O G0CA3N G1CA6Z G2CF3Z G0AA3O G1SA0N G2SI0N 2 A0CA6Z B0CA6Z D0CA6Z E1CA3N E1CF6N F1CA3N F2CA6Z F0CF6Z F1AA3O G1CA3N G2CA6Z G0CF6Z G1AA3O G2SA0N G0SI0Z 3 A0AA6L B0AA6L D0AA6L E0CA6N 4 A0AA6O B0AA6O D0AA6O E1CA6N F2CA3N F0CF3N F1CF6Z F2AA3O G2CA3N G0CF3N G1CF6Z G2AA3O G0SA0O G1SI0Z F0CA6N F1CF3N F2CF6Z F0AA6O G0CA6N G1CF3N G2CF6Z G0AA6O G1SA0O G2SI0Z 5 6 7 8 9 10 E0CA3Z E0CF6Z F1CA6N E1CA3Z E1CF6Z F2CA6N F0CF6N F1AA3L F2AA6O G2CA6N G0CF6N G1AA3L G2AA6O G0SA0Z G1SK0N E0CA6Z E0AA6L F0CA3Z F1CF6N F2AA3L E1CA6Z E1AA6L F1CA3Z F2CF6N F0AA6L E0AA6O F2CA3Z F0CF3Z F1AA6L E1AA6O F0CA6Z F1CF3Z F2AA6L G0CA3Z G1CF6N G2AA3L G0SA0L G1SA0Z G2SK0N G1CA3Z G2CF6N G0AA6L G1SA0L G2SA0Z G0SK0Z G2CA3Z G0CF3Z G1AA6L G2SA0L G0SI0N G1SK0Z G0CA6Z G1CF3Z G2AA6L G0SA0N G1SI0N G2SK0Z F0AA3L F1AA6O G1CA6N G2CF3N G0AA3L G1AA6O G2SA0O G0SK0N BRANCH SIZE,INCH (NPS) HEADER SIZE, INCH(NPS) 1/2" 3/4" 1" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 34" 36" 1/2" T 3/4" RTE T 1" RTE RTE T 1 1/2" RTE RTE RTE T 2" WOL WOL RTE RTE T 3" WOL WOL WOL WOL RTE 4" WOL WOL WOL WOL RTE RTE T 6" WOL WOL WOL WOL WOL RTE RTE 8" WOL WOL WOL WOL WOL WOL RTE RTE 10" WOL WOL WOL WOL WOL WOL RTE RTE RTE 12" WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE T 14" WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE T 16" WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE T 18" WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE T 20" WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE T 24" WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE T 26" WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE T 28" WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE T 30" WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE T 32” WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE T 34" WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE T 36" WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE RTE RTE RTE RTE RTE T 1/2" 3/4" 1" 1 1/2" 2" 18" 20" 24" 26" 28" 30" 32" 34" 36" T 3" 4" T 6" T 8" T 10" 12" 14" 16" LEGEND: T Equal Tee RTE Reducing Tee WOL Weldolet Using of weldolets for branch above NPS 8 shall be cautious due to the risk of welding thermal distortion. Sweepolet or reducing tee plus reducer could be used instead. 281 Q/BZH 11103.02-2021 / Q/BZH 11203.02-2021 FOR PIPING CLASS: 1 F0CA3N F1CA6Z F0AA3O G0CA3N G1CA6Z G2CF3Z G0AA3O G1SA0N 2 F1CA3N F2CA6Z F0CF6Z F1AA3O G1CA3N G2CA6Z G0CF6Z G1AA3O G2SA0N G0SI0Z 3 4 F0CA6N F1CF3N F2CF6Z F0AA6O G0CA6N G1CF3N G2CF6Z G0AA6O G1SA0O F0CF3N F1CF6Z G2CA3N G0CF3N G1CF6Z G2AA3O G0SA0O G1SI0Z 5 F1CA6N 6 F2CA6N F0CF6N F1AA3L F2AA6O G2CA6N G0CF6N G1AA3L G2AA6O G0SA0Z G1SK0N F0AA3L F1AA6O G1CA6N G2CF3N G0AA3L G1AA6O G2SA0O G0SK0N 7 F0CA3Z F1CF6N 8 F1CA3Z F2CF6N F0AA6L 9 10 F0CA6Z F0CF3Z F1AA6L G0CA3Z G1CF6N G2AA3L G0SA0L G1SA0Z G1CA3Z G2CF6N G0AA6L G1SA0L G2SA0Z G0SK0Z G2CA3Z G0CF3Z G1AA6L G2SA0L G0SI0N G1SK0Z 16" 24" 28" F2AA6L G0CA6Z G1CF3Z G2AA6L G0SA0N G1SI0N BRANCH SIZE,INCH (NPS) 1/2" 3/4" 1" 1 1/2" 2" 3" 4" 6" 8" 10" 12" 14" 18" 20" 26" 30" 32" 34" 36" T 3/4" RTE T 1" RTE RTE T 1 1/2" RTE RTE RTE T 2" WOL WOL RTE RTE T 3" WOL WOL WOL WOL RTE T 4" WOL WOL WOL WOL RTE RTE T 6" WOL WOL WOL WOL WOL RTE RTE 8" WOL WOL WOL WOL WOL WOL RTE RTE T 10" WOL WOL WOL WOL WOL WOL RTE RTE RTE T 12" WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE 14" WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE 16" WOL WOL WOL WOL WOL WOL WOL WOL RTE RTE RTE RTE 18" WOL WOL WOL WOL WOL WOL WOL WOL RR RTE RTE RTE RTE 20" WOL WOL WOL WOL WOL WOL WOL WOL RR RTE RTE RTE RTE RTE 24" WOL WOL WOL WOL WOL WOL WOL WOL RR RR RTE RTE RTE RTE RTE T 26" WOL WOL WOL WOL WOL WOL WOL WOL RR RR RTE RTE RTE RTE RTE RTE T 28" WOL WOL WOL WOL WOL WOL WOL WOL RR RR RTE RTE RTE RTE RTE RTE RTE T 30" WOL WOL WOL WOL WOL WOL WOL WOL RR RR RTE RTE RTE RTE RTE RTE RTE RTE T 32” WOL WOL WOL WOL WOL WOL WOL WOL RR RR RR RTE RTE RTE RTE RTE RTE RTE RTE T 34" WOL WOL WOL WOL WOL WOL WOL WOL RR RR RR RR RTE RTE RTE RTE RTE RTE RTE RTE T 36" WOL WOL WOL WOL WOL WOL WOL WOL RR RR RR RR RTE RTE RTE RTE RTE RTE RTE RTE RTE T 1/2" 3/4" 1" 1 1/2" 2" 3" 4" 8" 10" 12" 14" 16" 24" 26" 28" 30" 32" 34" 36" HEADER SIZE, INCH(NPS) 1/2" T 6" T T T T 18" T 20" LEGEND: T Equal Tee RTE Reducing Tee RR Reducing Tee with Reducer WOL Weldolet Using of weldolets for branch above NPS 8 shall be cautious due to the risk of welding thermal distortion. Sweepolet or reducing tee plus reducer could be used instead. 282
0
advertisement
Download
advertisement
Add this document to collection(s)
You can add this document to your study collection(s)
Sign in Available only to authorized usersAdd this document to saved
You can add this document to your saved list
Sign in Available only to authorized users