PINNACLE INTERNATIONAL PILING
PILING RIG MACHINE CHECKLIST
Project No:
Rig MC Serial No :
NO. PART ITEM INSPECTION METHOD
The machine control display is
Control
in working condition ok
1
display
2
Engine oil
level and
coolant
Manually check the engine oil
level and coolant level
3
Fuel and
Heat Level
The fuel and heat level
checking displays are working.
Inspection Date from :
MON TUE WED THU FRI SAT SUN
To
INSPECTION PHOTO
Control Display Oil and Heat
level Display
Dip stick
Visual level
Check boom condition and
boom joints.
4
Boom
Condition
5
Overall wire condition.
rope
condition
Gearbox, Kelly bar and spare rope
6
Cabin
condition
7
Hydraulic
Pipe
Boom Condition
Ropes
All levers and control buttons are
working.
All hydraulic pipe is okay.
Hydraulic Pipe
Wire rope
The swing alarm is working
condition.
8
Swing Alarm
9
Swing
condition.
warning light
10
Track and
iron plate
11
Swing motor in good condition.
Swing Light is working
Swing Alarm
Swing warning
light
Track
Swing Motor
The track should not have
deformation or damage and the
ground should be in good condition
The swing motor and screw are
12 Mirror
Bacon /
A back view mirror is available.
13 Warning
Light
Check the warning rotating or
blinking light or working
condition.
14 Bucket pin
Drilling Kelly bar and Drilling
Bucket Pin and lock available
15 Guard
Safety guard available over the
operator cabin.
Chained
16 casing pin
Back views
mirrors
Bucket Pin
All casing pins checked and
supports chain available to
avoid fall of the pin.
Inspection Comments
Checked by Drill Rig Operator
Name & Sign
Acknowledge by HSEO or Lifting
Supervisor/Engineer.
Bacon
/Warning Light
Cabin Guard