Beacon Machine Manufacturing Co., Ltd.
BK2000 Type Speed Governor Test Bench
Email:tiffanygeng@beacon-machine.com
Whatsapp:+8615305480320
www.beacon-machine.com
Beacon Machine Manufacturing Co., Ltd.
INTRODUCTION
BK2000 governor test bench is developed by our engineers and technicians with
more than ten years of governor maintenance experience. Its excellent performance,
compact structure and low price will become one of the platforms for you to check,
test and adjust governor performance.
BK2000 speed governor test bench is a kind of speed governor test equipment which
can test the governor conveniently and corrects the governor parameters accurately
far from the engine or turbine. It can test UG-8, UG-32, UG-40, 3161, PG (with
standard base and drive shaft), PG,EG, EGB 200, 3 produced by Woodward
Company. 00, PG 2 00300500, PGA, SG, PSG, EGB-2, EGB-58, LSG-10, PG-PH,
EG-3, EG-10, TG-13 governors and non-Woodward products such as EUROPA,
RHD6, TY111, TY555 governors and actuators. The non-standard governor base and
output shaft governors (actuators) produced by Woodward and other models or other
non-listed governors and actuators produced by other companies require additional
auxiliary devices.
CHARACTERISTIC
The contents of the governor or the governor of the BK2000 governor test stand are
usually as follows:
1. Governor oil pump pressure.
2, stop at high speed or low speed.
3, gas or electricity safety parking device.
Email:tiffanygeng@beacon-machine.com
Whatsapp:+8615305480320
www.beacon-machine.com
Beacon Machine Manufacturing Co., Ltd.
4, air pressure control or hydraulic control speed setting. It
5, electromagnetic coil or AC / DC motor speed setting.
6, speed setting.
7, output shaft stroke.
8. Load limiting control function.
9, electric control control / hydraulic control actuator.
10, the stability of the governor (on the test stand).
11, repair loophole inspection. The governor test bench is not an engine or turbine,
and it is impossible for the user to expect the governor test bench to replace the
turbine or engine that ultimately determines the governor's performance. The reason
is that it is impossible for any governor test bench to provide exactly the same
driving torque, torque, connection mode, turbocharging effect, acceleration and
deceleration effect, and control characteristics of connecting rod group as the engine
or turbine. Therefore, it is normal that the performance of the same governor
mounted on an engine or turbine and mounted on a test bench may differ. However,
the governor test bench can provide a quick and convenient way to test the governor
as the final device in the engine or turbine. Users of governor test bench can
carefully and completely test, adjust or set the variable parameters such as pressure,
speed, stop, load limit and speed adjustment on the test bench before the governor is
installed with engine or turbine. Practice has proved that, in most cases, the governor
installed on the engine or turbine according to the governor factory parameters on
the test bench can achieve satisfactory results.
Email:tiffanygeng@beacon-machine.com
Whatsapp:+8615305480320
www.beacon-machine.com
Beacon Machine Manufacturing Co., Ltd.
TECHNICAL PARAMETER
The main technical parameters of the BK2000 governor test stand are:
1, 3.7KW AC motor drive;
2, SIEMENS PLC;
3, provide adjustable 0MP 0.8MP, room temperature to 60 degrees centigrade
pressure oil. Tank capacity: 26 litre (about 5 gallons);
4, 3 times speedup;
5. Three sets of double-scale (MP, PSI) barometers (mechanical type); dial diameter:
150mm; accuracy level: 0.25, MP PSI double-scale dial
6. Two sets of dual-scale (MP, PSI) hydraulic meters (0-4MP, 0-1MP each set); dial
diameter: 100mm; accuracy, etc.
Class: 1.5; case material: 304SS
7, 0-1A DC power supply and 3 bit ammeter.
8, 0-110V DC power supply and two bit half voltmeter.
9. The height of the working face is about 900 millimeters (no feet, no casters).
10. The working speed range of the test-bed is 200~2500RPM. 7500RPM), speed
accuracy: + 1 turn.
11, power supply: 3X380V; 50HZ, voltage fluctuation range: -10%~+10%
12, power: 5500W;
13, compressed air demand: more than 0.5MP (air compressor user provided);
14, seven inch color screen.
Email:tiffanygeng@beacon-machine.com
Whatsapp:+8615305480320
www.beacon-machine.com
Beacon Machine Manufacturing Co., Ltd.
BK2000 ACCESSORIES LIST
Email:tiffanygeng@beacon-machine.com
Whatsapp:+8615305480320
www.beacon-machine.com
Beacon Machine Manufacturing Co., Ltd.
Email:tiffanygeng@beacon-machine.com
Whatsapp:+8615305480320
www.beacon-machine.com
Beacon Machine Manufacturing Co., Ltd.
CHECK OUR LOVELY CUSTOMER AND OUR COMOANY
Email:tiffanygeng@beacon-machine.com
Whatsapp:+8615305480320
www.beacon-machine.com
Beacon Machine Manufacturing Co., Ltd.
Email:tiffanygeng@beacon-machine.com
Whatsapp:+8615305480320
www.beacon-machine.com
Beacon Machine Manufacturing Co., Ltd.
Email:tiffanygeng@beacon-machine.com
Whatsapp:+8615305480320
www.beacon-machine.com