엽록소형광측정기 FP110 요약 사용설명서
1. SET 를 누르면 기기가 켜진다.
MENU
를 길게 누르면 기기가 꺼진다.
일정시간 기기의 조작이 없으면 기기는 자동으로 꺼진다.
2.
MENU
를 누르면 기기의 Menu를 선택한다.
3. Menu를 계속 누르면서 Return을 선택한 후
에서 필요 Menu 선택한 후
리를 하는 모드다.
SET
SET
를 누르고 Main화면
버튼으로 하부모드로 들어가면 기기의 관
Data 삭제, 기기 시간 변경. . .
4. Measure 모드로 측정모드를 선택한 후
SET
를 누르면 각 측정모드에 맞
게 측정을 시작한다. 화면에서 지시하는 데로 따르면 된다.
Program 설치 및 일치화
1. 제공된 USB Memory를 컴퓨터에 연결한다.
USB에서는 Software, USB Driver, USB Guides 디렉토리로 구성됬다.
2. Software 디렉토리를 선택하여 FluorPenInstall을 선택하여 프로그램을
설치한다.
설치가 완료되면 바탕화면에서 나뭇잎 모양(FluorPen)을 더블 클릭하여
프로그램을 실행한다.
실행화면에서 Help를 선택하여 Register를 선택
하면 S/N을 기재하는 란이 보인다. 이 때 USB에 저장된 SN File 속의
번호를 입력한다. S/N이 기재되었을 때는 Help에서 Register가 보이지
않는다.
3. 프로그램을 설치 후 프로그램을 실행하면 화면 하단에 Not connect가
나타나면 USB Driver의 디렉토리에서 USB Drive Setup을 실행한다.
4. 실시화면 File. Device. Setup. Help중에서 Setup의 하부 Device ID를
선택하면 자동으로 ID가 생성되고 기기와 컴퓨터의 연결이 된다.
만약 자동으로 연결되지 않으면 ID에 SN을 입력한다.
Data 저장 및 내보내기.
1. Device의 download 화면 외쪽 최상단 그림을 선택하면 장비의 Data가
download 된다.
data 삭제는 Device의 Erase memory나 장비 자체의
Menu를 사용한다.
OJIP나 NPM 프로토콜에서 그래프는 기본적으로 개별적으로 표시된다.
이것을 통합하려면 “Setup”==>“Settings”에서 오른쪽 하단 Graf에서
Single에 체크한다.
2. File에서 Save를 선택하여 측정한 Data를 저장한다.
3. 측정한 Data는 TXT File로 내보내기가 가능하다.
4. File에서 Export를 선택하면 상단 How 칸에서 Computed Values를 선택
하고 하단 What에서는 원하는 자료를 체크한다. Ft는 Ft, Qy는 Qy를 체크
하고 OJIP, NPQ등 계산에 의한 변수는 Measuring By Protocol를 선택하
면 된다.
5. Excel File을 실행하고 “데이터”==>“텍스트”를 실행하고 모든파일이나
텍스트 file을 선택한 후 해당 file을
선택한 후 마법사에서 1단계 구분기호
로 분리됨, 2단계에서 탭칸을 선택하고 3단계 마침을 선택하면 실행된다.
프로그램간 충돌이 일어나므로 목적에 맞게 약간의 편집을 하여야 한다.
Fo
: 초기 형광값, 스트레스 시 증가
Fm : 최대 형광값, 스트레스시 감소
Fm/Fo
: 스트레스 지수
Fv/Fm : 광합성 수율, 광합성을 할 수 있는 최대잠재력
OJIP
: 엽록소형광유도곡선
O-J
: 광계II의 반응중심에서 전자수용체인 QA의 광화학적 환원을 의미
J-I
: 광계II의 반응중심에서 QA-QB-의 측적을 의미, donor 부분에 의해 조절, 형광소멸
I-P
: 광계II의 반응중심에서 plastoquinone pool로의 전자전달활성, QA-QB2-축적을 의미
형광소멸관찰
Fm/Fo : 스트레스 지수 – 스트레스를 받으면 수치가 낮아진다.
Fv/Fm : 양자효율 지수 – 현 상태에서 광합성을 할
수 있는 최대잠재력
스트레스를 받으면 수치가 낮아진다.
PIABS
: 에너지흡수지수, 스트레스를 받으면 지수가 낮아진다.
광계2에 의해 흡수된 광자와 광합성계 내부의 전자수용체 환원 정도를 나타내고
광계1의 최종 전자수용체 환원정도를 나타내는 지표.
ABS/RC : 반응 중심비의 활성화 정도
TRo/RC : 흡수한 광자의 고정효율
ETo/RC : 광계II의 전자전달효율, 스트레스를 받으면 수치가 낮아진다.
DIo/RC : 열로인한 에너지 손실, 스트레스를 받으면 수치가 높아진다.
PIABS
: 에너지흡수지수, 스트레스를 받으면 지수가 낮아진다.
스트레스에 민감.
광계2에 의해 흡수된 광자와 광합성계 내부의 전자수용체 환원 정도를 나타내고
광계1의 최종 전자수용체 환원정도를 나타내는 지표.
NPQ
Fo :
: 엽록소형광소멸곡선
Minimal chlorophyll fluorescence intensity measured in the dark-adapted state,
Fm :
Maximal chlorophyll fluorescence intensity measured in the dark-adapted state
when all PSII reaction centres are open
during the application of a saturating pulse of light
F′o :
Minimal chlorophyll fluorescence intensity measured in the light-adapted state
F′m(Fm_Lss) : Maximal chlorophyll fluorescence intensity measured in the light-adapted
state uring the application of a saturating pulse of light
Fs(Ft_Lss)
: Chlorophyll fluorescence intensity measured at the steady-state after
subjecting the sample to non-saturating actinic illumination
Fv
: Variable chlorophyll fluorescence (Fm−Fo) measured in the dark-adapted state,
when nonphotochemical processes are minimum
F′v
: Variable chlorophyll fluorescence (Fm−Fo)measured in the light-adapted state
Fv/Fm
: Maximum quantum yield of PSII photochemistry measured in the dark-adapted
state
Fo/Fv
:
Ratio of minimal chlorophyll fluorescence intensity to variable chlorophyll
fluorescence, measured in the dark-adapted state
Fm/Fs
: Ratio of maximal chlorophyll fluorescence intensity measured in the dark-adapted
state to steady-state chlorophyll fluorescence. In this case, Fs is obtained after
illumination with continuous saturating irradiance. This ratio is an indicator of
the photosynthetic quantum conversion
Rfd=Fd/Fs=(Fm-Fs)/Fs:
Chlorophyll fluorescence decrease ratio. In this case, Fs is obtained after
llumination with continuous saturating irradiance. Rfd is an indicator of the
photosynthetic quantum conversion and is correlated with CO2 fixation rates
ΦPSII=(F′m-Fs)/F′m
: Effective quantum yield of photochemical energy conversion in PSII
ΦNO=1/(NPQ+1+qL(Fm/Fo−1)) : Quantum yield of non-regulated energy dissipation in PSII
ΦNPQ=1−ΦPSII−ΦNO
ΦNPQ/ΦNO
:Quantum yield of regulated energy dissipation in PSII
: Ratio of quantum yield of regulated to non-regulated energy dissipation in
PSII, which is related to the capacity of photoprotection of the
photosynthetic apparatus
NPQ=(Fm−F′m )/F′m
NPQI
: Stern-Volmer non-photochemical quenching coefficient
:Component of the NPQ parameter related to the
photoinhibition-dependent quenching
qN=(Fm−F′m)/(Fm−F′o) : Coefficient of non-photochemical quenching of variable
fluorescence
qL=qP×Fo/Fs
: Coefficient of photochemical quenching of variable fluorescence based on
the lake model of PSII
F′v /F′m :Exciton transfer efficiency from antenna pigments to the reaction centre of PSII
in the light adapted state
FluorPen
FP110
Series
Operation Manual
(한글 요약판)
PSI (Photon Systems Instruments), spol. s r.o.
Drasov 470, 664 24 Drasov,
Czech Republic, http:/ /www.psi.cz
PSI Korea 연우과학
010-4536-1900
053-381-8991