Certificate no:
Page 1 of 2
PRJ11071220/23
Welder Qualification Test Certificate
BS EN ISO 9606-1: 2017
Designation:
EN ISO 9606-1 141 P BW FM5 S s2.5 PA bs
Welding Procedure
Specification Reference No.
HENC 76/18
Welder’s Name
ENANGELOS SYRIGOS (W01)
Identification:
AA023595
Method of Identification:
Date and place of birth:
IDENTITY CARD
24/10/1961, PIRAEUS, GREECE
Employer:
BELLOWS HELLAS O.E
Code/Testing Standard:
BS EN ISO 9606-1: 2017
Job knowledge:
Not Tested
Welding process(es)
Transfer Mode
Product type (plate or pipe)
Type of weld
Parent material group(s)/subgroups
Filler material group(s)
Filler material (Designation)
Shielding gas
Auxiliaries
Type of current and polarity
Material thickness (mm)
Deposited thickness (mm)
Outside pipe diameter (mm)
Welding positions
Weld details
Multi-layer/single layer
Examining Body:
Reference No:
Test piece
Range of qualification
141
PLATE
BW
8.1
FM5
S
EN ISO 14343-A : W 19 9 L Si, AWS A5.9 :ER308LSi
ISO 14175:2008-I1-Argon
DCEN
2.5
2.5
PA
bs
ml, FW: sl
141,142,143,145
PLATE,PIPE
BW
FM5
S,M
2.5-5
>500 fixed pipe, ≥75 rotated
PA
ss,mb bs
sl,ml
Supplementary fillet weld test (completed in conjunction with a butt weld qualification):
Additional information is available on attached sheet and/or welding procedure specification:
Type of test
Performed and
acceptable
Visual testing
x
Not tested
Notes
(Report Numbers, etc)
Hellenic Lloyd’s SA
N. PANTELIADIS
RT/A/18/050
Surveyor to Hellenic Lloyd's S.A.
x
Ultrasonic testing
Magnetic particle / Penetrant test
x
Macroscopic examination
x
PT/A/18/021
A subsidiary of Lloyd's Register Group Limited
MC/A/18/143
x
Fracture test
Not Applicable
-
LR031.2.2008
x
Radiographic testing
Hellenic Lloyd's S.A. /
Date of issue:
Bend test
x
BT/A/18/141
Location:
Notch tensile test
x
TT/A/18/142
Date of welding:
Revalidation
9.3 a)
Valid Until
27 March
2021
Revalidation
9.3 b)
Valid Until
Revalidation
9.3 c)
04 May 2018
Piraeus
p
27 March 2018
Valid Until
Note:
Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as
'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or
advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or
advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
Form 4125 (2017.10)
This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document,
which is retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.
Certificate no:
Page 2 of 2
PRJ11071220/23
Confirmation of the validity by employer / welding coordinator / examiner or examining body for the following 6 months [refer 9.2)]
**Revalidation for qualification by examiner or examining body for the following 2 years [refer to 9.3 b)] (if applicable)
Date
Valid until
Confirmation based on (Report numbers etc)
Signature / Position or Title
**
**
**
**
**
**
Form 4125 (2017.10)
This is a copy of an electronic document. In the event of any conflict or ambiguity between the copy and the electronic document,
which is retained and published by Lloyd's Register, the original electronic and certified version shall always prevail.