JSW-STEEL COATED
PRODUCTS LTD
-A SUBSIDIARY OF JSW STEEL
C O LO U R C OAT E D C O ILS A N D S HE E T S
PRODUCTION UNITS OF JSW
STEEL COATED PRODUCTS
LIMTED
TARAPUR WORKS
VASIND WORKS
KAMLESHWAR WORKS
TARAPUR WORKS
Located at Maharastra and Gujarat border ,
about 100 km from Mumbai.
Ultra Thin coated Products
Products are
- Pre-painted Galvanised / Galvalume
- Galvanised
- Bare Galvalume
VASIND WORKS
Located 70 Kms from Mumbai
Full fledged complex with CRM,Galvanizing
& Colour coating line
First appliance Grade colour coating line
Major White Good Manufacturer
Sources HR from Dolvi and Vijaynagar
KAMLESHWAR WORKS
Located 30 kms from Nagpur
Higher thickness and Higher coating
Products are
- Pre-painted Galvanised / Galvalume
- Galvanised
- Bare Galvalume
JSW RADIANCE- COLOUR COATED SHEET
Anti Microbial- Microbes resisting
Anti Graffiti- Stain resisting
Anti Dust- Dust resisting
Anti Statics –Charge resisting
Cool roof- Heat resisting
High Gloss – Reflective Index
JSW- COLOUR COATED SHEETS
Technical Standard- Base Substrate IS 15961 and colour coated as
per IS 15965
Grade- 550 MPA or 345 MPA
Thickness-0.3- 1.5 mm Total Coated thickness
Width- upto 1550 mm
Al-Zn coating- 150/200 g/m2
Coil Weight- 3-8 T
Coating thickness -25(Top Side) + 10 microns
Solar Reflectance Index- >80(shade specific)
Paint system-RMP ,SMP,SDP, PVDF
PAINT SYSTEM
RMP- Regular Modified Polyester
Colour coated steel painted and dried with polyester
SMP- Silicon Modified Polyester
Steel painted with Silicon resin and dried
SDP- Super Durable Polyester
Pre finished steel for construction material
PVDF- Poly Vinylidene Fluoride
Steel sheets applied and hardened with Fluorine resin
PERFORMANCE TESTING
Scratch Hardness(T/B)- 1.5-2/1-1.5 Kg
Salt Spray test-750-1000 Hrs
Adhesion test- 100%
Humidity Test- 750-1000 Hrs
Solvent Rub test- 100 DR-Non metalic,80 DR metalic
Max. operating temp-upto 140 c
Water Boiling test- As per standard
Chemical test- As per standard
PACKAGING & MARKING OF COLOUR
COATED COIL/ SHEET
Eye to sky packing
Eye to wall packing
Slit Master coil packing
Sheet Packing
Marking
JSW RADIANCE 0.5 MM AZ150
COMPARISON OF COLOUR COATED SHEETS AND
GALVANIZED
Parameters
Colour coated sheets
Galvanized Sheets
Price
Rs1,02,000- May,23
RS80,500- May,23
Weight
Approxiately same
Weather Effects No Rusting
White Rust
Life
10 Yrs
20 Yrs- 120 GSM
Shed
Cool
As per weather conditions
Appearance
Shining, Colourful ,Clean
Zn colour
COMPARISON BETWEEN GALVANIZED(GI) AND
GALVALUME(GL) SHEETS
Parameters
Galvalume
Galvanized
Sheets
Coating
GL(55% Al,43.3% Zn,1.6% Si)
GI(Zn)
Service Life
Same coating
thickness
30-45 Yrs
10-15 Yrs
Appearance
Heat Resistance
Lighter
Can be painted without pre
treatment
Better
Corrosion Resistance Better
3-11% Costlier
Price
Zn Shine
JSW SUBSIDIARIES
JSW Steel coated
products Ltd
Is a Subsidiary of JSW
JSW STEEL LTD
18 MTPA CAPACITY
Vijaynagar works- 10 MTPA
Salem works
Dolvi and Salav works
VIJAYNAGAR WORKS
3.3 MTPA CRM complex for Cold Rolled Closed Annealed Coil(CRCA)
Automotive steel CR and GA
Both GI and GA production
Strength upto 980 MPA
Offers JIS and Indian Standards
Two CRMs;
CRM1- Batch annealing, upto 440 MPA, 0.35-3.2mmx upto 1650 mm width CR
CRM2- Continuous annealing, upto 980 MPA,0.35-2.3 mm, upto 1870mm width CR
and GP
Grade-0.3-3mm thickness,750-1870 mm width, CQ,DQ,DDQ,EDDQ,IF,HIF,HSS and
Bake Hardening
PRODUCTS OF JSW STEEL LTD
Hot Rolled Coil
Cold Rolled Coil
Bare & Pre painted Galvanized & Galvalume
TMT Rebar
Wire Rod
Special Steel
APPLICATIONS
Automobile
White goods
Cold Rolled formed sections
General Engineering and Fabrication
Packaging
Drums/ Barrel
Furniture
Electrical panels
THANK YOU