GUIDE ONLY. NOT INCLUDED IN SHEET COUNT.
LINE WEIGHT
STANDARD REFERENCE SYMBOL (DRAWING BLOCK TITLE)
LINE TYPE
0.80
CONTINUOUS
THIS LINE VALUE IS USED FOR BORDER LINES AND TABLES
(LEGEND TABLE).
0.50
CONTINUOUS
THIS LINE VALUE IS USUALLY USED FOR WALLS, FURNITURE,
ARROW HEADS, ENDPOINTS
(ARROWHEAD SIZE VARIES ON THE SCALE)
0.30
CONTINUOUS
THIS LINE VALUE IS USUALLY USED FOR FURNITURE,
FIXTURES, LEGENDS
PAGE SEQUENCE
0.20
STANDARD FONT: HELVETICA LT CONDENSED LIGHT
ARROWHEAD FOR DIMENSIONS (END POINT): ARCHITECTURAL TICK
ARROWHEAD FOR LEADER (CALL OUT): CLOSED FILLED
CONTINUOUS
(THIS MAY CHANGE DEPENDING ON HOW MANY PLANS ARE TO BE MADE)
01
02
03
04
05
06
07
08-09
10-11
REFLECTED CEILING PLAN
FLOOR PLAN W/ FURNITURE LAYOUT
FLOOR PLAN W/ FLOOR PATTERN LAYOUT
LIGHTING LAYOUT
POWER LAYOUT
AUXILIARY LAYOUT
SUPPLEMENTAL LAYOUTS (WALL AND FLOOR LIGHTING LAYOUT)
ELEVATIONS
ITEMIZED FURNITURE DESIGN (IN THIS TEMPLATE, THERE IS ONLY ONE PAGE
OF ITEMIZED FURNITURE.)
12-ONWARDS CONSTRUCTION DETAILS
THIS LINE VALUE IS USUALLY USED FOR GLASS WALLS,
ACCESSORIES, LEGENDS, AND DETAILINGS.
THIS LINE VALUE IS USUALLY USED FOR DETAILINGS, DOORS/
WINDOW HATCH, DIMENSIONS AND ARROW LINES.
0.10
CONTINUOUS
0.10
DASHED/ HIDDEN THIS LINE VALUE IS USUALLY USED FOR HIDDEN FURNITURE
UNDERNEATH ANOTHER FURNITURE, FOR DETAILING HIDDEN
PARTS, OR FOR BUILT-INS OR WALL MOUNTED FURNITURE
ABOVE ANOTHER FURNITURE. EXAMPLE OF THIS IS
OVERHEAD CABINET.
RULES IN LINE VALUE
IN USING THESE LINE VALUES, ALWAYS REMEMBER THAT ANY FURNITURE OR FIXTURE THAT IS
ALWAYS ON TOP (OR THE HIGHEST) MUST BE USED WITH THE THICKEST LINE VALUE THAT CAN BE
USED FOR FURNITURE (0.60 OR 0.50) AND THE FURNITURE ON THE LOWEST PART SHOULD BE USED
WITH THE THINEST LINE (0.20 OR 0.10). DETAILS OF THE FURNITURE SUCH AS HASPE (WOOD GRAIN),
HATCHES, ETC. SHOULD BE IN 0.10 LINE VALUE.
AREA 1: INTERIOR DESIGN OFFICE
LIGHTING LAYOUT
1
EXAMPLE:
IF THE FLOOR PLAN AND THE
REFLECTED CEILING PLAN ARE IN
THE SAME PAGE/ PAPER, FLOOR
PLAN WILL BE "1" AND THE RCP
WILL BE "2"
ID - 04
SCALE
1:90
MTRS.
TEXT HEIGHT: 2MM
SIZE: 15MM
LINE VALUE: 0.80
PAGE/ SHEET NO.
DISCIPLINE DESIGNATOR
LINE VALUE: 0.80
BASIC LEGEND SYMBOLS
BREAK LINE, STRAIGHT
DETAIL/ BLOW UP INDICATOR
SEE CONSTRUCTION
DETAIL
SEE CONSTRUCTION
DETAIL
A
OBJECT LINE
LINES ARE THICK AND DARK (THICKENSS DEPENDS ON LINE VALUE TO
BE USED); USED TO DEFINE OBJECT.
DETAIL/ BLOW UP INDICATOR FOR SMALL CONDITIONS
A1
ELEVATION INDICATOR (CUTTING PLANE LINE)
5MM
HIDDEN LINE
LINES USED TO SHOW INTERIOR DETAIL THAT IS NOT VISIBLE FROM
THE OUTSIDE OF THE PART.
LONG BREAK LINE
LINES THAT IS USED TO END A FEATURE WHEN DRAWING IT IN ITS
ENTIRETY IS NOT NECESSARY. THE LONG BREAK IS USED AFTER THE
DEFINING CHARACTERISTICS HAVE BEEN SHOWN.. LINE
TEXT HEIGHT: 7MM
0.50
LINE TYPE
CUTTING PLANE LINE
THIS LINE IS DRAWN ON THE FLOOR PLAN AND SHOWS WHERE AN
OBJECT IS SLICED TO CREATE A SECTION VIEW. SOMETIMES ONLY THE
TWO ENDS OF A CUTTING PLANE LINE ARE SHOWN TO AVOID
OBSCURING OTHER LINES ON THE PLAN.
DRAWING NO.
TEXT HEIGHT: 5MM
DRAWING NUMBER WILL CHANGE IF
THERE ARE 2 OR MORE DRAWINGS
IN A PAPER/ PAGE.
SEE CONSTRUCTION
DETAIL
LINE CONVENTIONS
CENTER LINE
LINES THAT DEFINE THE CENTER OF ARCS, CIRCLES, OR SYMMETRICAL
PARTS. THEY ARE HALF AS THICK AS AN OBJECT LINE (0.30).
AREA NO. AND NAME.
TEXT HEIGHT: 3MM
0.20
0.10
LINE VALUES OF FURNITURE VARIES DEPENDING ON ITS HEIGHT. FROM 0.2 AS LOWEST AND 0.6 AS
ITS HIGHEST POINT POSSIBLE.
ACCESSORIES ON TOP OF FURNITURE SHOULD BE IN 0.2 OR 0.3 LINE VALUE.
BUILT-IN FURNITURE THAT ARE MOUNTED ABOVE ANOTHER FURNITURE OR FIXTURE (SUCH AS
OVERHEAD CABINET) ARE IN BROKEN LINES WITH A 0.3 LINE VALUE.
FURNITURE (SUCH AS MOVABLE CABINETS) THAT ARE HIDDEN BENEATH ANOTHER FURNITURE IS
USED WITH BROKEN LINES IN 0.1 LINE VALUE.
0.10
ELEVATION INDICATOR, INTERIOR, SINGLE VIEW
A
0.30
A
B
SECTION DETAIL INDICATOR (FOR CONSTRUCTION DETAIL)
5MM
+
0.30
0.10
100'-0"
ELEVATION MARKER
01
FURNITURE INDICATOR
B1
BUILT-IN FURNITURE INDICATOR
01
WALL FINISH INDICATOR
4MM
0.10
EXTENSION LINES
LINES THAT CAN EMANATE FROM THE ENDPOINTS OR CENTER OF AN
OBJECT.
DIMENSION LINES
RUN PERPENDICULAR TO THEM AND CONTAIN THE DIMENSION NOTE.
THESE LINES SHOULD BE DARK ENOUGH TO REPRODUCE ON A COPY,
BUT THINNER THAN THE OBJECT LINES SO AS NOT TO BE CONFUSED
WITH THEM. ON A PENCIL DRAWING, CHOOSE A HARD (LIGHT) PENCIL
OR A DARK, BUT THINNER, PENCIL (OR PEN). LINE VALUE IS 0.10.
LEADER LINE
LINES THAT ARE USED TO SHOW DIMENSIONS OF ARCS, CIRCLES AND
TO HELP SHOW DETAIL. LINE VALUE IS 0.10.
0.20
10
R A
SAB
FOR SWITCHING LAYOUT:
A STANDARD SYMBOL WITH AN ADDED UPPERCASE IR LOWERCASE SUBSCRIPT
LETTER IS USED TO DESIGNATE A VARIATION IN LIGHTS AND SWITCHES.
8
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
GRAPHICAL REPRESENTATIONS
3MM
FF-01
FLOOR FINISH INDICATOR
+- 0000
2.2MM
CF-01
450
FOR POWER LAYOUT:
ALWAYS INDICATE THE HEIGHT OF THE OUTLETS FROM THE FINISH FLOOR LINE IN
THE LAYOUT AND LEGENDS SECTION.
2700MM
PREPARED BY: IDr. WILAN DAYRIT
CEILING FINISH INDICATOR
SHEET DRAWN BY: D. P. PANGILINAN & K. S. V. TALOZA
GUIDE ONLY. NOT INCLUDED IN SHEET COUNT.
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
STANDARD ELECTRICAL SYMBOLS
LIGHTING SYMBOLS
SWITCHES
CONSTRUCTION DETAIL SYMBOLS
LIGHTING OUTLET
S
TUMBLER SWITCH, SINGLE POLE, 10A, 220V
FLUORESCENT LIGHT
2S
TUMBLER SWITCH, 2 SINGLE POLE IN 1 GANG
PLATE, 10A, 220V
3S
TUMBLER SWITCH, 3 SINGLE POLE IN 1 GANG
PLATE, 10A, 220V
RECESSED LIGHT/ DOWNLIGHT
2WS
2-WAY SWITCH WITH PLATE COVER
DIRECTIONAL SPOT LIGHT
3WS
3-WAY SWITCH WITH PLATE COVER
DROP LIGHT
4WS
4-WAY SWITCH WITH PLATE COVER
WALL LAMP/ SCONCE
S WP
WEATHERPROOF SWITCH
TRACK LIGHTS
S DM
DIMMER
INCANDESCENT LAMP
PL
R
DL
PINLIGHT
PLYWOOD
WOOD (VENEER)
TILE (PORCELAIN)
TILE (CREAMIC)
WOOD (HARD WOOD/ SOFT WOOD)
CLAY
PLASTER/ STUCCO
SAND
STONE
CONCRETE
BRASS
ALUMINUM
WROUGHT IRON - STEEL
CAST IRON
TIN
SLATE
GLASS
CORK
GRAVEL
BRICK
MARBLE
GRANITE
PLASTIC/ ACRYLIC
WIRE MESH
INSULATION (FURNITURE)
INSULATION (THERMAL ACOUSTICS)
LEATHER
ROUGH LUMBER
TERRACOTTA
EARTH
SECURITY LAMP
PENDANT LAMP
AUXILIARIES
GARDEN LIGHT (BOLLARD)
(ON AUXILIARY LAYOUT)
CHANDELIER
SOUND SYSTEM OUTLET
ACU
POWER (CONVENIENCE OUTLETS)
ACU CONTROL, WALL MOUNTED
POINT OF SALES OUTLET
SINGLE CONVENIENCE OUTLET
B
BELL AND BUZZER (INDICATE VOLTAGE)
DUPLEX CONVENIENCE OUTLET
CR
CARD READER
TRIPLEX CONVENIENCE OUTLET
SD
SMOKE DETECTOR
WP
WEATHERPROOF CONVENIENCE OUTLET
HD
HEAT DETECTOR
R
RANGE OUTLET
SP
OVERHEAD SPRINKLER
SPECIAL PURPOSE OUTLET
(ACU, REF, DW, ETC.)
SP
SIDE-THROW SPRINKLER
ACU
CCTV
CCTV CAMERA
FO
F
FLOOR CONVENIENCE OUTLET
SPEAKERS
EMERGENCY LIGHT
FAN HANGER OUTLET
EXT
EXIT LIGHT
TEL
TELEPHONE OUTLET
EX
EXHAUST FAN
IC
INTERCOM OUTLET
ACU
WINDOW TYPE ACU
PABX
PABX OUTLET
ACU
SPLIT TYPE ACU
CATV
CABLE/ TELEVISION OUTLET
LAN
LAN/COMPUTER DATA OUTLET
MISCELLANEOUS SYMBOLS
CIRCUIT RUN
CKT
(n)
BRANCH CIRCUIT HOMERUN TO PANELBOARD
LIGHT AND POWER PANELBOARD
NOTE:
THESE SYMBOLS ARE THE MOST USED IN ELECTRICAL PLANS. FOR ADDITIONAL SYMBOLS USED, PLEASE INDICATE IN LEGENDS.
PREPARED BY: IDr. WILAN DAYRIT
SHEET DRAWN BY: D. P. PANGILINAN & K. S. V. TALOZA
GUIDE ONLY. NOT INCLUDED IN SHEET COUNT.
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
NOTES FOR ELECTRICAL PLANS
FOR SWITCHING:
FOR LIGHTING LAYOUT :
THERE ARE TWO OPTIONS THAT CAN BE USED FOR SWITCHING.
FIRST OPTION
SWITCHES
DESCRIPTION
SYMBOL
S
(FORMAT) NUMBER OF GANG SWITCH; FINISH AND COLOR OF SWITCH
MATERIAL; TYPE OF MOUNTING; AMPERE; VELOCITY; HEIGHT IN FFL;
DISTANCE FROM WALL/DOOR EDGE
(n)
"CHARACTER REPRESENTING A LIGHTING FIXTURE" - GANG NO., TYPE OF
ELECTRICAL SWITCH
3 GANG TUMBLER SWITCH PLATE IN GLOSSY WHITE THERMOSET, WALL
MOUNTED, 10A, 220V, 1400MM FFL, 100MM FROM THE DOOR EDGE
S1
A - 1ST GANG, SINGLE POLE
B - 2ND GANG, SINGLE POLE
C - 3RD GANG, 3 WAY SWITCH
NOTES:
"T" CHARACTERS THAT ARE MOUNTED ON WALLS REPRESENT THE
SWITCH.
"S(n)", INDICATES THE NUMBERING OF SWITCHES
DETAILS ABOUT THE SWITCH AND THE CHARACTERS THAT
REPRESENTS THE LIGHTING FIXTURES INDICATED IN SWITCHES ARE
FOUND IN THE LEGENDS,
S1
(ON PLAN)
THE LIGHTING LAYOUT REFLECTS THE LAYOUT OF LIGHTING
FIXTURES, THE SWITCHING, AND THEIR FLOW AND NUMBERING
OF CIRCUITS.
16-18 LIGHTING FIXTURES ARE ALLOWED PER CIRCUIT.
CIRCUIT PATHWAYS MUST NOT OVERLAP OR CROSS EACH
OTHER.
CIRCUIT RUN LINE VALUE: 0.10.
BUILT IN FURNITURE, ATTACHED ON THE FINISHED CEILING,
ARE STILL INCLUDED ON SOLID CONTINUOUS LINE BUT
FURNITURE LAYOUT, CEILING FINISHES, OTHER AUXILIARIES
ARE ALREADY EXCLUDED.
DISTANCES (MM) OF LIGHTING FIXTURES FROM EACH OTHER
UP TO THE EDGE OF ANY NEAR WALLS ARE INCLUDED. LINE
VALUE: 0.10.
ALL MAJOR DIMENSIONS (MM) ARE ONLY INDICATED IN
ELECTRICAL PLANS. LINE VALUE: 0.10.
ALL DOORS ARE CLOSED IN ELECTRICAL PLANS.
LEGENDS ARE CONSIST OF LIGHTING LEGENDS (FOUND FROM
THE REFLECTED CEILING PLAN) AND SWITCHING LEGENDS.
EXCEPTIONS:
AUXILIARIES LIKE CEILING AND EXHAUST FANS ARE INCLUDED IN
THE LIGHTING LAYOUT BECAUSE THEY ALSO USE SWITCH.
SECOND OPTION
SWITCHES
SYMBOL
2S
DESCRIPTION
(FORMAT) TYPE OF ELECTRICAL SWITCH; FINISH AND COLOR OF SWITCH
MATERIAL; TYPE OF MOUNTING; AMPERE; VELOCITY; HEIGHT IN FFL;
DISTANCE FROM WALL/DOOR EDGE
TUMBLER SWITCH, 2 SINGLE POLE IN GLOSSY WHITE THERMOSET, WALL
MOUNTED, 10A, 220V, 1400MM FFL, 100MM FROM THE DOOR EDGE
2S ab
(ON PLAN)
"T" CHARACTERS THAT ARE MOUNTED ON WALLS
REPRESENT THE SWITCH.
"2S" - TUMBLER SWITCH, 2 SINGLE POLE IN 1 GANG PLATE
CHARACTERS THAT REPRESENT THE LIGHTING FIXTURES
INDICATED IN THE SWITCH ARE LOCATED BESIDE THE
SYMBOL OF ITS TUMBLER SWITCH.
FOR POWER & AUXILIARY LAYOUT :
POWER LAYOUT ONLY REFLECTS THE LAYOUT OF ALL
CONVENIENCE OUTLETS USED, AND THEIR FLOW AND
NUMBERING OF CIRCUITS.
AUXILIARY LAYOUT REFLECTS OTHER FIXTURES LIKE SMOKE
DETECTORS, CCTV CAMERA, ETC.
ONLY 6-8 OUTLETS ARE ALLOWED PER CIRCUIT.
CIRCUITS FOR APPLIANCES OUTLETS ARE SEPARATED
INDIVIDUALLY.
OUTLET SYMBOLS, WITH THEIR HEIGHT FROM FINISH FLOOR
LINE, ARE WALL MOUNTED ON PLANS. LINE VALUE: 0.10.
BUILT-IN FURNITURE AND WALL PANELS THAT ARE ATTACHED
ON THE FINISHED CEILING ARE STILL INCLUDED ON THE PLAN
WITH SOLID CONTINUOUS LINE.
CIRCUIT PATHWAYS MUST NOT OVERLAP OR CROSS EACH
OTHER.
CIRCUIT RUN LINE VALUE: 0.10.
ALL DOORS ARE CLOSED IN ELECTRICAL PLANS.
OTHER OPTIONS:
POWER AND AUXILIARY LAYOUT CAN BE MERGED INTO ONE
LAYOUT.
PREPARED BY: IDr. WILAN DAYRIT
SHEET DRAWN BY: D. P. PANGILINAN
& K. S. V. TALOZA
FIXTURES
21793 MM
1627
1359
1377
1393
1407
843
1641
962
SYMBOL
366
1808
1102
653
1254
1380
1560
1560
DESCRIPTION
[FORMAT] DIMENSION, WATTS, BRAND, TYPE OF LIGHT,
HOUSING MATERIAL, TYPE OF MOUNTING, COLOR,
TEMPERATURE (K)
QUANTITY: DON'T FORGET THE UNIT
1450
300
CCTV
SD
CCTV
PL
SP
R
CCTV
CF-03
2600 MM
PL
PL
CF-01
2700 MM
PL
CF-01
2700 MM
PL
SD
PL
2780 MM
PL
CCTV
534
CCTV
SP
534
SP
SD
CF-01
2700 MM
CF-03
CCTV
1372
2700 MM
CCTV
CF-02
2600MM
SP
CF-04
SD
CF-05
2700 MM
409
CF-05
225
5
SD
SP
CF-01
SD
93
2700 MM
CF-05
CF-01
1000
SP
800
2700 MM
SD
2700 MM
993
SD
250 250
CCTV
CCTV
CF-01
CF-02
1500
CCTV
SP
300
2700 MM
538
2600 MM
2700 MM
1500
3100
CF-05
456
19MM THK T&G SOLID OAK WOOD VENEER PLANKS IN
PREFINISHED DARK CHOCOLATE COLOR. MOUNTED
2600MM FROM FINISH FLOOR LINE.
QUANTITY: 84 PCS.
1762
1
2" STRAIGHT EDGE GYPSUM BOARD IN BOYSEN
PERMACOAT LATEX PAINT IN SEMI GLOSS FINISH (WHITE
B-701). MOUNTED 2600MM FROM FINISH FLOOR LINE.
NOTES:
SD
2700 MM
10000 MM
2580 MM
591
CF-07
2600MM
959
CF-05
CCTV
2700 MM
CF-03
700
428
1160
THICKNESS (THK), TYPE OF MATERIAL, FINISH, HEIGHT
OF FINISH FROM FLOOR LINE, QUANTITY (IF APPLICABLE)
850
2600 MM
808
CF-01
2700MM
427 300 300 577 247
CF-06
PL
400
836
SD
1067
DESCRIPTION
PL
PL
THE REFLECTED CEILING PLAN IS A SCALED DRAWING OF A SPACE INDICATING ALL
CEILING FIXTURES AND HEIGHT TRANSITIONS. IT IS NAMED SO BECAUSE THEY ARE
MIRROR (REFLECTED) VIEW OF THE FLOOR PLAN. IT IS LIKE LOOKING UP AT THE
CEILING, SEEING THE LIGHTS AND VARIOUS CEILING ELEMENTS IN THAT VIEW.
ARCHITECTURAL PLAN INDICATES:
ALL CEILING FIXTURES
CEILING FINISHES
- DIMENSIONING IN REFLECTED CEILING PLAN SHOULD SHOW THE DISTANCES OF
FIXTURES TO EACH OTHER.
- DIMENSIONING A ROOM USUALLY STARTS IN THE END (INSIDE) OF THE WALL.
- THE UNIT FOR DIMENSIONS IS MILLIMETERS (MM). IT MUST BE INDICATED ALWAYS
IN THE MAIN DIMENSIONS.
- IN THE REFLECTED CEILING PLAN, THE DOORS ARE ALL CLOSED.
650
SD
CF-01
SD
1000
1000
2700 MM
CF-05
CF-06
2700 MM
2780 MM
517
1400
782
1120
1440
1440
1440
300
10040 MM
SYMBOL
PL
SD
PL
9W EGLO LED PINLIGHT BRUSHED IN NICKLE
MATTE HOUSING, RECESSED, NATURAL WHITE, 3100K
QUANTITY: 13 PCS.
CEILING FINISHES
PL
179
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
LEGENDS
1440
SP
1120
AREA 1: INTERIOR DESIGN OFFICE
1
ID - 01
REFLECTED CEILING PLAN
SCALE
1:90
300 492
840
1450
1228
240 549 293 458
"CF" STANDS FOR CEILING
FINISH. THIS LEGEND
INDICATES THE DIFFERENT
CEILING FINISHES USED.
THE LIST OF FINISHES ARE
LOCATED AT THE RIGHT
SIDE OF THE PAPER.
16550 MM
MTRS.
THE LINE VALUE USED IS 0.30
CF-01
2700MM
THIS INDICATES THE CEILING
HEIGHT OF THE CEILING FINISH
FROM THE FINISH FLOOR LINE.
THE UNIT SHOULD BE IN
MILLIMETERS (MM).
PREPARED BY: IDr. WILAN DAYRIT
SHEET DRAWN BY: K. S. V. TALOZA
FURNITURE
SYMBOL
21793 MM
11120
4673
6000
01
1400
DESCRIPTION
CUSTOMIZED RECEPTION DESK
DIMENSIONS: 2650MM (W) x 750MM (D) x 960MM (H)
QUANTITY: 1 PC.
BUILT-INS/ FIXTURES
C
SYMBOL
03
B9
04
16
15
RTAIN
ENTE
12
06
MEN
LEAD DESIGNER'S
OFFICE
02
11
B8
11 SQM
T
INE
10
NIC
STEP UP
GLASS CURTAIN
09
22
36 SQM
20
08
23
02
RTAIN
36 SQM
07
03
ER
1940
7 SQM
B11
10
D4
D3
07
D5
2170
PANTRY
HALLWAY
D4
01
20MM THK 300MM (L) x 600MM (W), MARIWASA IVORY MARBLE
WALL TILE, GLAZED FINISH
QUANTITY: 26 PCS.
02
WALL IN BOYSEN PERMACOAT LATEX PAINT IN SEMI GLOSS
FINISH, WHITE B-701.
03
11
B7
DESCRIPTION
13 SQM
POWDER
ROOM
SYMBOL
WALL DIVIDER
04
04
03
1005
06
SLEEPING ROOM
05
B4
B1
6.5 SQM
12
02
D5
RECEPTION AREA
02
03
B
GENERAL OFFICE
D6
06 SHOWER
T&B
03
27 SQM
5.8 SQM
B5
B3
04
B4
15 SQM
01
THE FLOOR PLAN IS A SIMPLE LINE DRAWING SHOWING ROOMS AS
THOUGH SEEN FROM ABOVE. WALLS, DOORWAYS, AND WINDOWS ARE
OFTEN DRAWN TO SCALE. FURNITURE LAYOUT SHOWS THE
DIMENSIONS, ARCHITECTURAL FEATURES, AND THE SUGGESTED
POSITION OF FURNITURE AND ACCESSORIES. THESE INCLUDES:
BUILT-INS SUCH AS CABINETS, FLOOR DRAINS, FIXTURES, ETC.
UPHOLSTERY
AREA RUGS, LAMPS, PLANTS
WALL TREATMENTS
- AREA LABELLING MUST BE OBSERVED ALWAYS.
- OVER ALL AREA DIMENSION MUST BE INDICATED. THE UNIT SHOULD
BE IN SQUARE METERS (SQM)
- DIMENSIONING IN ANY FURNITURE LAYOUT IS SIMPLE. IT SHOULD
SHOW THE SIZE OF EACH AREA/ ROOM.
- THE UNIT FOR DIMENSIONS IS MILLIMETERS (MM). IT MUST BE
INDICATED IN THE MAIN DIMENSIONS.
-ALWAYS REMEMBER THAT IN THE FURNITURE LAYOUT, ALL DOORS
ARE OPEN.
934
2700
8000
2016
16550 MM
D1
C1
AREA 1: INTERIOR DESIGN OFFICE
1
ID - 02
BORDER SIZE: 1" ALL SIDES
LINE VALUE FOR BORDER LINE: 0.8
FLOOR PLAN W/ FURNITURE LAYOUT
SCALE
1:90
ENTRY
1600
1300
TILE
THICKNESS,
DIMENSIONS,
BRAND, NAME, COLOR, TYPE
OF TILE, TYPE OF FINISH,
QUANTITY
D1
SOLID WOOD/ VENEER
THICKNESS, BRAND, TYPE
OF WOOD, TYPE OF FINISH
WALL DIVIDER
THICKNESS, DIMENSIONS,
BRAND,
NAME
OF
PRODUCT
DESCRIPTION
12MM THK 800MM (W) x 2100MM (H) RIGHT HAND INSWING,
CLEAR LAMINATED TEMPERED GLASS SINGLE DOOR W/
STAINLESS STEEL BAR HANDLE.
SUPPLIER: TIMETECH GLASS PRODUCTS CO., LTD .
QUANTITY: 1 PC.
LOCATION: CONFERENCE ROOM
90MM OR 3.5"
B5
05
NOTES:
FIXTURE
BRAND, NAME OF FIXTURE/
TYPE
OF
FIXTURE,
MANUFACTURER/
DESIGNER
55MM THK 1200MM (W) x 4000MM (H),
D1
B2
B1
2235
63.5MM OR 2.5"
1650
5000
01
B6
2MM THK, METROWOOD BIRCH VENEER, LACQUERED SMOOTH
FINISH.
DOOR SCHEDULE LEGENDS
6 SQM
WALL DIVIDER
BUILT-IN
NAME OF THE FURNITURE AND
THE DESIGNER. IF
CUSTOMIZED, PUT
"CUSTOMIZED" IN THE
BEGINNING.
DIMENSIONS: W x D x H (MM)
QUANTITY: DON'T FORGET THE
UNIT
PAINT
BRAND TYPE OF PAINT, COLOR
10
06
10040 MM
STORAGE ROOM
36 SQM
B5
SYMBOL
3100
IVID
LL D
TOILET
3.5 SQM
B10
19
18
10000 MM
1400
21 SQM
PHOTOCOPYING
&
PRINTING
ROOM
B2
ABOVE-COUNTER BATHROOM SINK
DIMENSIONS: 533MM (W) x 356MM (D) x 178MM (H)
QUANTITY: 3 PCS.
B12
LIBRARY AND
SWATCH ROOM
D2
D5
B4
10
21
CONFERENCE ROOM
S CU
GLAS
B1
WALL FINISHES
STYLISTS AREA
1900
HED
CAB
14
PRINCIPAL DESIGNER'S
OFFICE
08
A
A1
LOUNGING AREA
10 SQM
[FORMAT]
NAME OF THE FURNITURE AND
THE DESIGNER. IF
CUSTOMIZED, PUT
"CUSTOMIZED" IN THE
BEGINNING.
DIMENSIONS: W x D x H (MM)
QUANTITY: DON'T FORGET THE
UNIT
DESCRIPTION
CUSTOMIZED WALL MOUNTED DESK
DIMENSIONS: 1800MM (W) x 700MM (D) x 720MM (H)
QUANTITY: 2 PCS.
D
17
05
T
13
WA
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
LEGENDS
ALWAYS LEAVE A SPACE
FOR THE THESIS
STICKER.
MTRS.
PREPARED BY: IDr. WILAN DAYRIT
SHEET DRAWN BY: K. S. V. TALOZA
THICKNESS, SIZE (WIDTH x
HEIGHT, MM), TYPE OF
SWING, MATERIAL OF
DOOR, TYPE OF DOOR,
FINISH, HARDWARE TYPE,
SUPPLIER,
QUANTITY
(DON'T FORGET THE UNIT),
AND LOCATION
SYMBOL
DESCRIPTION
21793 MM
11120
4673
KEY TILE
6000
1400
CEILING FINISHES
SYMBOL
FF-01
+- 0000
FF-03
FF-03
+ 0150
+ 0150
DESCRIPTION
[FORMAT] THICKNESS, SIZE (L x W), BRAND, TYPE OF
MATERIAL, FINISH.
QUANTITY: DON'T FORGET THE UNIT
F (SEE CONSTRUCTION DETAIL)
FF-02
+- 0019
FF-03
+ 0150
E (SEE CONSTRUCTION DETAIL)
19MM THK 1400MM (L) x 120MM (W) T&G SOLID OAK
WOOD FLOORING IN PREFINISHED DARK CHOCOLATE
COLOR. CLEAR LACQUERED.
QUANTITY: 38 PCS.
NOTES:
A FLOOR PATTERN LAYOUT IS A LINE DRAWING SHOWING THE DESIGN AND DETAILS
OF THE FLOORING THOUGH SEEN FROM ABOVE.
BUILT-INS/ CABINETRY
UPHOLSTERY
AREA RUGS, LAMPS
PLANTS, ETC.
1900
1018
A (SEE CONSTRUCTION DETAIL)
FF-02
1400
+- 0019
D
(SEE
CONSTRUCTION
DETAIL)
FF-07
+- 0019
FF-04
FF-07
+- 0012
+- 0007
(SEE
CONSTRUCTION
DETAIL)
10000 MM
1174
(SEE
CONSTRUCTION
DETAIL)
FF-06
FF-01
+- 0019
+- 0010
FF-01
+- 0010
FF-02
1005
+- 0019
5000
4100
2170
C
B
1940
+- 0007
3100
4067
FF-06
10040 MM
FF-05
+- 0012
FF-01
+- 0010
FF-06
- DIMENSIONING IN A FLOOR PATTERN LAYOUT IS SIMPLE. IT SHOULD SHOW THE SIZE
OF EACH AREA/ ROOM.
- DIMENSIONING A ROOM USUALLY STARTS IN THE END (INSIDE) OF THE WALL.
- THE UNIT FOR DIMENSIONS IS MILLIMETERS (MM). IT MUST BE INDICATED ALWAYS
IN THE MAIN DIMENSIONS.
- IN FLOOR PATTERN LAYOUT, THE DOORS ARE REMOVED.
- ALL FURNITURE THAT ARE INSTALLED ON THE WALLTHAT BARELY TOUCHES THE
FLOOR OR MOUNTED OVER AN INSTALLED FLOOR FINISH SHOULD BE IN BROKEN LINE
WITH 0.1 THK LINE VALUE.
"FF" STANDS FFOR FLOOR
FINISH. THIS LEGEND IS USED
TO INDICATE THE DIFFERENT
FLOOR FINISHES USED. THE
LIST OF FINISHES ARE
LOCATED AT THE RIGHT
SIDE OF THE PAPER.
THE LINE VALUE USED IS 0.30
FF-01
+- 0000
THIS INDICATES THE HEIGHT OF
ELEVATION OR DEPRESSION OF
THE FLOOR FINISH FROM THE
ORIGINAL FLOOR LINE. THE UNIT
SHOULD BE IN MILLIMETERS (MM).
"+" STANDS FOR THE HEIGHT OF ELEVATION. IT IS THE INCREASE OF HEIGHT OF THE
FLOOR FINISH FROM THE ORIGINAL FLOOR LINE.
+- 0019
1650
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
LEGENDS
1405
2205
"-" STANDS FOR THE HEIGHT OF DEPRESSION OR THE DECREASE OF HEIGHT OR THE
SIZE OF THE 'FALL' OR 'DROP' OF THE FLOORING FROM THE ORIGINAL FLOOR LINE.
1300
2700
8000
2016
1600
2235
16550 MM
AREA 1: INTERIOR DESIGN OFFICE
1
ID - 03
FLOOR PLAN W/ FLOOR PATTERN LAYOUT
SCALE
1:90
MTRS.
PREPARED BY: IDr. WILAN DAYRIT
SHEET DRAWN BY: K. S. V. TALOZA
FIXTURES
SYMBOL
21793 MM
DESCRIPTION
[FORMAT] DIMENSION, WATTS, BRAND, TYPE OF LIGHT,
HOUSING MATERIAL, TYPE OF MOUNTING, COLOR,
TEMPERATURE (K)
QUANTITY: DON'T FORGET THE UNIT
1100
PL
PL P
S
U
P
1400
1500
PL P
R
U
111
PL R
0
3S STU
3WSCD
1400
PL
Q
Q
N
600
N
1600
PL
b
1560
1785
D
D
a
C
a
Q
2S TUMBLER SWITCH, 2 SINGLE POLE IN GLOSSY WHITE
c
c
THERMOSET, WALL MOUNTED, 10A, 220V, 1400MM FFL,
100MM FROM THE DOOR EDGE
c
3WS abc 2S Zd
N
1500
C
N
b
1560
C
Q
3S PQR
2S NO
O
PL
b
1600
1400
1330
Z
D
MISCELLANEOUS
X
C
D
W
Y
Y
Y
Y
Y
Y
Y
Y
SYMBOL
c
e
CIRCUIT RUN
X
d
C
d
L
3WS abc
10000 MM
K
W
3S WXY
Se
120
0
L
1500
L
K
1500
CKT
BRANCH CIRCUIT HOMERUN TO PANELBOARD
2S KL
C
C
D
E
K
DESCRIPTION
c
Y
D
L
400
C
D
E 500
E 500
C
D
LIGHT AND POWER PANELBOARD
C
D
3WS CD
SE
E
2S fg
f
SI
2800
750
3S FGH
F
I
g
F
f
A
A
A
A
G
G
G
G
G
1500
600
2S AB
f
B
950
1215
1440
B
A
615
1070
F
F
900
1400
F
2510
J
g
2800
B
J
B
1500
550
1600
B
3950
1150
SJ 3S FGH
1100
550
B
H
1050
10040 MM
297
441
M
Y
W
Y
Y
800
SV
Y
Y
0
120
V
Y
1500
Y
Y
800
M
d
800
1200
439
SM
3S FGH
DESCRIPTION
(FORMAT) TYPE OF ELECTRICAL SWITCH; FINISH AND
COLOR OF SWITCH MATERIAL; TYPE OF MOUNTING;
AMPERE; VELOCITY; HEIGHT IN FFL; DISTANCE FROM
WALL/DOOR EDGE
1000
300 300
Q
SYMBOL
602
S
300
R
PL
9W EGLO LED PINLIGHT BRUSHED IN NICKLE
MATTE HOUSING, RECESSED, NATURAL WHITE, 3100K
QUANTITY: 13 PCS.
SWITCHES
T
S
300
PL
P
PL
1500
P
PL P
PL
R
S
1500
PL
P
1500
600
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
LEGENDS
g
16550 MM
AREA 1: INTERIOR DESIGN OFFICE
1
ID - 04
LIGHTING LAYOUT
SCALE
1:90
MTRS.
PLEASE REFER TO NOTES FOR ELECTRICAL LAYOUT PAGE
FOR NOTES AND SWITCHING OPTIONS..
PREPARED BY: IDr. WILAN DAYRIT
SHEET DRAWN BY: D. P. PANGILINAN
& K. S. V. TALOZA
POWER
SYMBOL
DESCRIPTION
630
[FORMAT] TYPE OF OUTLET; FINISH AND COLOR OF
MATERIAL; TYPE OF MOUNTING; AMPERE, VELOCITY,
HEIGHT IN FFL, DISTANCE FROM WALL/DOOR EDGE
QUANTITY: DON'T FORGET THE UNIT
DUPLEX CONVENIENCE OUTLET IN GLOSSY WHITE
THERMOSET, SURFACE MOUNTED, 20A, 220V, 300MM
FROM
FFL
300
QUANTITY: 13 PCS.
345
300
315
300
300
IC
300MM FFL
300
IC
300
300MM FFL
1304
300
300
TEL
TEL
IC
300MM FFL
AIR CONDITIONING UNIT OUTLET IN GLOSSY WHITE
THERMOSET, SURFACE MOUNTED, 20A, 220V, 2200MM
ACU FROM FFL
QUANTITY : 3 PCS.
370
300
370
300
1050
300
300
TEL
TEL
300
IC
1050MM FFL
AUXILIARY
IC
SYMBOL
300MM FFL
315
CKT
TEL
IC
300MM FFL
300
300
315
CKT
DESCRIPTION
[FORMAT] NAME OF FIXTURE
QUANTITY: DON'T FORGET THE UNIT
3
300
300
300
1540
IC
300
TEL
SD
300MM FFL
MISCELLANEOUS
300
300
IC
300MM FFL
300
315
315
300
SYMBOL
DESCRIPTION
300
345
CIRCUIT RUN
CKT
1050MM FFL
0
100
315
2
WP
WP
CKT
300MM FFL
300
REF
300MM FFL
TEL
IC
300 315
300
300 315
300MM FFL
315
5
300
WP
315
315
300MM FFL
OPTICAL SMOKE DETECTOR
QUANTITY: 11 PCS.
TEL
BRANCH CIRCUIT HOMERUN TO PANELBOARD
300
TEL
300MM FFL
CKT
LIGHT AND POWER PANELBOARD
300MM FFL
835
300
563270
4
315
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
LEGENDS
CKT
1
300MM FFL
315
1050MM FFL
684
300MM FFL
300 300 300 300
IC
WP
300MM FFL
TEL
300 300 300 300
TEL
300
TEL
300
TEL
300
300
684
315 300 300
IC
TEL
1051
IC
300
AREA 1: INTERIOR DESIGN OFFICE
1
ID - 05
POWER LAYOUT
SCALE
1:90
MTRS.
PLEASE REFER TO NOTES FOR ELECTRICAL LAYOUT PAGE
FOR NOTES.
PREPARED BY: IDr. WILAN DAYRIT
SHEET DRAWN BY: D. P. PANGILINAN
& K. S. V. TALOZA
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
LEGENDS
AUXILIARY
SYMBOL
DESCRIPTION
[FORMAT] NAME OF FIXTURE
QUANTITY: DON'T FORGET THE UNIT
CCTV
SD
CCTV
SP
CCTV
SD
OPTICAL SMOKE DETECTOR
QUANTITY: 11 PCS.
SD
SD
SD
CCTV
CCTV
SP
SP
SD
CCTV
SD
CCTV
SD
SD
SP
SD
CCTV
SP
SD
CCTV
CCTV
SD
SD
SP
AREA 1: INTERIOR DESIGN OFFICE
1
ID - 06
AUXILIARY LAYOUT
SCALE
1:90
MTRS.
PLEASE REFER TO NOTES FOR ELECTRICAL LAYOUT PAGE
FOR NOTES.
PREPARED BY: IDr. WILAN DAYRIT
SHEET DRAWN BY: D. P. PANGILINAN
& K. S. V. TALOZA
FIXTURES
SYMBOL
21793 MM
DESCRIPTION
[FORMAT] DIMENSION, WATTS, BRAND, TYPE OF LIGHT,
HOUSING MATERIAL, TYPE OF MOUNTING, COLOR,
TEMPERATURE (K)
QUANTITY: DON'T FORGET THE UNIT
R
125MM (L) x 270MM (H) 40W EGLO PALMERA LED LIGHT
BRUSHED IN CHROMED STEEL HOUSING, WALL
MOUNTED, WARM WHITE, 2400K
QUANTITY: 4 PCS.
SWITCHES
SYMBOL
DESCRIPTION
(FORMAT) TYPE OF ELECTRICAL SWITCH; FINISH AND
COLOR OF SWITCH MATERIAL; TYPE OF MOUNTING;
AMPERE; VELOCITY; HEIGHT IN FFL; DISTANCE FROM
WALL/DOOR EDGE
2S TUMBLER SWITCH, 2 SINGLE POLE IN GLOSSY WHITE
THERMOSET, WALL MOUNTED, 10A, 220V, 1400MM FFL,
100MM FROM THE DOOR EDGE
CKT
1
MISCELLANEOUS
SYMBOL
DESCRIPTION
SB
B
134
CIRCUIT RUN
10000 MM
CKT
BRANCH CIRCUIT HOMERUN TO PANELBOARD
LIGHT AND POWER PANELBOARD
SA
NOTES:
1820
A
A SUPPLEMENTAL LAYOUT INCLUDES WALL LIGHTING LAYOUT AND FLOOR
LIGHTING LAYOUT.
WALL LIGHTS AND FLOOR CAN BE COMBINED OR SEPARATED.
PLEASE REFER TO PREVIOUS PAGES FOR LIGHTING AND SWITCHING NOTES.
A
1392
B
618
10040 MM
0
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
LEGENDS
16550 MM
AREA 1: INTERIOR DESIGN OFFICE
1
ID - 07
WALL LIGHTING LAYOUT
SCALE
1:90
MTRS.
PLEASE REFER TO NOTES FOR ELECTRICAL LAYOUT PAGE
FOR SWITCHING OPTIONS.
PREPARED BY: IDr. WILAN DAYRIT
SHEET DRAWN BY: D. P. PANGILINAN
& K. S. V. TALOZA
STAINED OAK WOOD WALL PANEL
10MM THK 1200MM x 300MM HOMOGENEOUS PORCELAIN
STONEWARE (STAGE - SCALE BY RODOLFO DORDONI)
NICHED WALL IN BOYSEN PERMACOAT
LATEX PAINT IN SEMI-GLOSS FINISH
(WHITE B-701)
300
10MM THK 1200MM x 300MM HOMOGENEOUS PORCELAIN
STONEWARE (STAGE - SCALE BY RODOLFO DORDONI)
150
2250
300
150 150
2700
150
FCL
3000MM
2700
2550
2250
FFL
PRINCIPAL DESIGNER'S OFFICE
LEAD DESIGNER'S OFFICE
LOUNGING AREA
LIBRARY & SWATCH ROOM
STYLISTS' AREA
AREA 1: INTERIOR DESIGN OFFICE
SECTION ELEVATION A
1
SCALE
ID - 08
1:65
MTRS.
WALL IN BOYSEN PERMACOAT
LATEX PAINT IN SEMI-GLOSS
FINISH (WHITE B-701)
WALL IN BOYSEN PERMACOAT LATEX PAINT
IN SEMI-GLOSS FINISH (BASIC BEIGE B 7522)
19MM THK 300MM x 600MM
ASH GREY SLATE WALL
TILE IN UNGLAZED FINISH
300
170
WALL IN BOYSEN PERMACOAT LATEX PAINT
IN SEMI-GLOSS FINISH (BASIC BEIGE B 7522)
2700
2100
100
722
2830
2700
FCL
3000MM
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
WALL IN BOYSEN PERMACOAT LATEX PAINT
IN SEMI-GLOSS FINISH (BASIC BEIGE B 7522)
FFL
POWDER ROOM
RECEPTION AREA
GENERAL OFFICE
SLEEPING ROOM
NOTES:
AREA 1: INTERIOR DESIGN OFFICE
2
ID - 08
SECTION ELEVATION B
SCALE
1:65
MTRS.
ELEVATIONS ARE DRAWINGS THAT ARE COMMONLY USED TO SHOW INTERIOR VIEWS OF STRUCTURE FROM ALL SIDES
OF INTERIOR WALLS. THEY SHOW A PICTURE-LIKE VIEW AS IT WOULD ACTUALLY APPEAR ON VERTICAL PLANE.
FORMAT FOR CALL OUTS ARE THE SAME AS THE FORMAT IN THE PREVIOUS PLATES.
ELEVATION SHOW LAYERS OF THE FOLLOWING
WALL FINISH
WALL BUILT-INS (CABINETS, WALL MOUNTED SHELF)
WALL FIXTURES
FREE STANDING FFURNITURE AND ACCESSORIES
TYPES OF DOORS AND WINDOWS AND HOW THEY WILL APPEAR IN THE FINISHED DESIGN.
FURNITURE AND ACCESSORIES ARE SHOWN IN 0.10 BROKEN LINES.
WALLS SHOULD BE IN AR-CONCRETE HATCH.
PREPARED BY: IDr. WILAN DAYRIT
SHEET DRAWN BY: C. J. R. HERRERA
& K. S. V. TALOZA
4" STAINED OAK WOOD BEAM AND BAMBOO WOOD
PANEL
230MM (L) x 110MM (W) x 76MM (H) CULTURED BRICKS
WALL IN BOYSEN PERMACOAT LATEX PAINT
IN SEMI-GLOSS FINISH (BASIC BEIGE B 7522)
2250
2625
2550
FFL
PANTRY
GENERAL OFFICE
300
150
720
900
1320
1820
2700
2790
450
300
WALL IN BOYSEN PERMACOAT LATEX
PAINT IN SEMI-GLOSS FINISH (WHITE B-701)
FCL
3000MM
PRINCIPAL DESIGNER'S OFFICE
AREA 1: INTERIOR DESIGN OFFICE
SECTION ELEVATION C
1
ID - 09
SCALE
1:50
MTRS.
WALL IN BOYSEN PERMACOAT LATEX PAINT
IN SEMI-GLOSS FINISH (BASIC BEIGE B 7522)
300
450
WALL IN BOYSEN PERMACOAT LATEX PAINT
IN SEMI-GLOSS FINISH (BASIC BEIGE B 7522)
FCL
720
1820
2700
2250
300
2700
2780
220
WALL IN BOYSEN PERMACOAT LATEX PAINT
IN SEMI-GLOSS FINISH (MOONLIGHT B 723)
230MM (L) x 110MM (W) x 76MM (H)
CULTURED BRICKS
3000MM
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
3
WALL IN BOYSEN PERMACOAT LATEX PAINT
IN SEMI-GLOSS FINISH (WHITE B-701)
FFL
STYLISTS' AREA
LIBRARY & SWATCH ROOM
GENERAL OFFICE
AREA 1: INTERIOR DESIGN OFFICE
2
ID - 09
SECTION ELEVATION D
SCALE
1:50
MTRS.
PREPARED BY: IDr. WILAN DAYRIT
SHEET DRAWN BY: C. J. R. HERRERA
& K. S. V. TALOZA
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
FOR 15x20 PAPER SIZE, 4-5 COLUMNS EACH PAPER ARE REQUIRED DEPENDING ON
THE SIZE OF THE FURNITURE.
FOR 20x30 PAPER SIZE, 5-6 COLUMNS EACH PAPER ARE REQUIRED DEPENDING ON
THE SIZE OF THE FURNITURE.
PHILIPPE STARCK STYLE PRATFALL CHAIR W/ CHROME LEGS
VITRA SOFTSHELL CHAIR
GRAYSON BAR STOOL
DESIGNER: CHARLES AND RAY EAMES
DESIGNER: LEXMOD
DESIGNER: RONAN ABD ERWAN BOUROULLEC
DESIGNER:
SUPPLIER: HERMAN MILLER, INC.
SUPPLIER: LEXMOD
SUPPLIER: NEST.CO.UK
SUPPLIER: DANETTI
DIMENSIONS: 584MM (W) X 584MM (D) X 787MM - 864MM (H)
DIMENSIONS: 508MM (W) X 584MM (D) X 720MM (H)
DIMENSIONS: 630MM (W) x 565MM (D) x 815MM (H)
DIMENSIONS: 380MM (W) X 420MM (D) X 850MM (H)
SEAT HEIGHT: 432MM - 483MM
SEAT HEIGHT: 750MM
ARM HEIGHT: 660MM - 737MM
MATERIALS/ FINISHES: FULL, TOP-GRAIN, SEMI-ANILINE DYED LEATHER, MATERIALS/ FINISHES: VINYL SEAT, STEEL FRAME, LACQUERED WOOD MATERIALS/ FINISHES: SEAT AND BACKREST SHELL MADE OF MATERIALS/ FINISHES: CHROME STEEL FRAME, BLACK LEATHER SEAT
POLISHED ALUMINUM, WITH CARPET HARD FLOOR CASTERS.
BACK
FIBERGLASS-REINFORCED POLYAMIDE COVERED WITH PLANO FABRIC.
CFC-FREE POLYURETHANE FOAM UPHOLSTERY. WITH FELT HARD
FLOOR GLIDE.
DESCRIPTION: ADJUSTABLE SEAT HEIGHT; TILT TENSION
DESCRIPTION:
DESCRIPTION:
DESCRIPTION:
QUANTITY: 8 PCS.
QUANTITY: 6 PCS.
QUANTITY: 4 PCS.
AREA: RECEPTION, GENERAL OFFICE, LEAD DESIGNER'S OFFICE
AREA: GENERAL OFFICE, LEAD DESIGNER'S OFFICE
AREA: PRINCIPAL DESIGNER'S OFFICE (DINING/ MEETING AREA)
QUANTITY: 4 PCS.
AREA: PANTRY
PRICE: PhP 29, 250.00
PRICE: 13, 455.00
PRICE: PhP 26, 848.00
PRICE: PhP 11, 200.00
AREA 1: INTERIOR DESIGN OFFICE
1
ID - 10
ITEMIZED FURNITURE DESIGN
NOT
TO
SCALE
PREPARED BY: IDr. WILAN DAYRIT
SHEET DRAWN BY: K. S. V. TALOZA
SAMPLE BLOW UP DETAIL FOR CEILING CONSTRUCTION DETAIL
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
CONCRETE
CONCRETE SCREW
METAL SCREW BRACKET
CONCRETE
CONCRETE SCREW
METAL SCREW BRACKET
ROD SUSPENSION HANGER
WITH ADJUSTMENT SPRING
ROD SUSPENSION HANGER
WITH ADJUSTMENT SPRING
50MM ACOUSTIC WOOL
FURRING CLIP/ TIE WIRE CLIP
METAL FURRING
50 MM ACOUSTIC WOOL
TIE WIRE
CEILING FURRING (HAT CHANNEL)
19MM THK PLASTER BOARD
FINISHING NAIL
SBM5 SOUNDPROOFING MAT
12.7MM THK STRAIGHT EDGE
GYPSUM BOARD (2700MM FFL)
METAL FURRING
CEILING FURRING (HAT CHANNEL)
TIE WIRE
19MM THK PLASTERBOARD
SBM5 SOUNDPROOFING MAT
12.7MM THK STRAIGHT EDGE
GYPSUM BOARD
WOOD SCREW
1
4" THK PLYWOOD
BLIND NAIL
2X2 S4S LUMBER
2X2 S4S LUMBER
FINISHING NAIL
19MM THK T&G SOLID OAK WOOD
PLANKS IN PREFINISHED DARK
CHOCOLATE COLOR (2600MM FFL)
AREA 1: INTERIOR DESIGN OFFICE
AREA 1: INTERIOR DESIGN OFFICE
BLOW UP DETAIL OF MAIN CEILING
1
ID - 11
SCALE
1:2
2
MTRS.
ID - 11
BLOW UP DETAIL OF DROP CEILING A
SCALE
1:2
MTRS.
BLIND NAIL
CONCRETE
CONCRETE
CONCRETE SCREW
METAL SCREW BRACKET
CONCRETE SCREW
METAL SCREW BRACKET
ROD SUSPENSION HANGER
WITH ADJUSTMENT SPRING
ROD SUSPENSION HANGER
WITH ADJUSTMENT SPRING
10MM ACOUSTIC WOOL
19MM THK PLASTER BOARD
FURRING CLIP/ TIE WIRE CLIP
METAL FURRING
50MM ACOUSTIC WOOL
TIE WIRE
WOOD NAIL
FURRING CLIP/ TIE WIRE CLIP
METAL FURRING
50 MM ACOUSTIC WOOL
TIE WIRE
CEILING FURRING (HAT CHANNEL)
SCREW
19MM THK T&G SOLID OAK WOOD
PLANKS IN PREFINISHED DARK
CHOCOLATE COLOR
1
4" THK PLYWOOD
WOOD SCREW
19MM THK PLASTER BOARD
SBM5 SOUNDPROOFING MAT
12.7MM THK STRAIGHT EDGE
GYPSUM BOARD (2580MM FFL)
BLIND NAIL
2X2 S4S LUMBER
150MM X 150MM THK T&G SOLID OAK
WOOD BEAMS IN PREFINISHED DARK
CHOCOLATE COLOR (2600MM FFL)
CEILING FURRING (HAT CHANNEL)
19MM THK PLASTER BOARD
BLIND NAIL
SBM5 SOUNDPROOFING MAT
12.7MM THK STRAIGHT EDGE
GYPSUM BOARD
AREA 1: INTERIOR DESIGN OFFICE
3
ID - 11
AREA 1: INTERIOR DESIGN OFFICE
BLOW UP DETAIL OF DROP CEILING B
SCALE
1:2
MTRS.
4
ID - 11
BLOW UP DETAIL OF BEAMS
SCALE
1:2
MTRS.
PREPARED BY: IDr. WILAN DAYRIT
SHEET DRAWN BY: K. S. V. TALOZA
SAMPLE BLOW UP FOR FLOORING CONSTRUCTION DETAIL
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
19MM THK T&G SOLID OAK WOOD
FLOORING IN PREFINSIHED DARK
CHOCOLATE COLOR. CLEAR LACQUERED
WOOD NAIL
15 LB. FELT OVER RADIANT
SLAB (POLY)
12.7MM (1 2") THK PLYWOOD
20MM (8 MILS) THK
POLYETHYLENE VAPOR
BARRIER
EXISTING CONCRETE FLOOR
19MM THK SINGLE GLAZED GREY
TEXTURED PORCELAIN TILE IN MATTE
FINISH
TILE GROUT
THINSET
15MM CEMENT BOARD
CONSTRUCTION THINSET
THINSET
EXISTING CONCRETE FLOOR
ID - 12
AREA 1: INTERIOR DESIGN OFFICE
BLOW UP DETAIL OF FLOORING A
SCALE
1:2
15MM CEMENT BOARD
2MM THK PLYWOOD UNDERLAY
CONSTRUCTION THINSET
AREA 1: INTERIOR DESIGN OFFICE
1
10MM THK SINGLE GLAZED
TEXTURED HOMOGENOUS
PORCELAIN STONEWARE
TILE GROUT
12MM THK SINGLE GLAZED
TEXTURED HOMOGENOUS
PORCELAIN STONEWARE
5
MTRS.
ID - 12
10MM THK SINGLE GLAZED TEXTURED
HOMOGENOUS PORCELAIN STONEWARE
THINSET
TILE GROUT
19MM THK SINGLE GLAZED GREY
TEXTURED PORCELAIN TILE IN
MATTE FINISH
15MM CEMENT BOARD
ADHESIVE
12.7MM MARINE PLYWOOD
UNDERLAY
CONSTRUCTION THINSET
BLOW UP DETAIL OF FLOORING E
SCALE
1:2
MTRS.
19MM THK T&G SOLID OAK WOOD
FLOORING IN PREFINSIHED DARK
CHOCOLATE COLOR. CLEAR LACQUERED
WOOD NAIL
15 LB. FELT OVER RADIANT
SLAB (POLY)
12.7MM (1 2") THK PLYWOOD
19MM THK T&G SOLID OAK WOOD STAIR
NOSING IN PREFINSIHED DARK CHOCOLATE
COLOR. CLEAR LACQUERED
BLINDNAIL
15MM CEMENT BOARD
20MM (8 MILS) THK
POLYETHYLENE VAPOR
BARRIER
EXISTING CONCRETE FLOOR
AREA 1: INTERIOR DESIGN OFFICE
2
ID - 12
BLOW UP DETAIL OF FLOORING B
SCALE
1:2
MTRS.
7MM THK SINGLE GLAZED
HOMOGENOUS PORCELAIN
STONEWARE IN MATTE FINISH
TILE GROUT
15MM CEMENT BOARD
10MM THK SINGLE GLAZED TEXTURED
HOMOGENOUS PORCELAIN STONEWARE
THINSET
CONSTRUCTION THINSET
4.5MM THK MARINE
PLYWOOD UNDERLAY
EXISTING CONCRETE FLOOR
12MM THK SINGLE GLAZED
TEXTURED HOMOGENOUS
PORCELAIN STONEWARE
THINSET
TILE GROUT
CONSTRUCTION
THINSET
15MM CEMENT BOARD
AREA 1: INTERIOR DESIGN OFFICE
3
ID - 12
EXISTING CONCRETE FLOOR
BLOW UP DETAIL OF FLOORING C
SCALE
1:2
MTRS.
AREA 1: INTERIOR DESIGN OFFICE
19MM THK T&G SOLID OAK WOOD
FLOORING IN PREFINSIHED DARK
CHOCOLATE COLOR. CLEAR LACQUERED
STAINLESS STEEL T-MOLDING
19MM THK SINGLE GLAZED GREY TEXTURED
PORCELAIN TILE IN MATTE FINISH
THINSET
WOOD NAIL
15 LB. FELT OVER RADIANT
SLAB (POLY)
15MM THK PLYWOOD
20MM (8 MILS) THK POLYETHYLENE
VAPOR BARRIER
EXISTING CONCRETE FLOOR
15MM CEMENT BOARD
CONSTRUCTION THINSET
AREA 1: INTERIOR DESIGN OFFICE
4
ID - 12
BLOW UP DETAIL OF FLOORING D
SCALE
1:2
MTRS.
6
ID - 12
BLOW UP DETAIL OF FLOORING F
SCALE
1:2
MTRS.
NOTES:
BLOW UP DETAILS ARE LARGER SCALED DRAWINGS WHICH SHOW FEATURES THAT DO NOT APPEAR (OR APPEAR ON
TOO SMALL A SCALE) ON THE PLANS, ELEVATIONS, AND SECTIONS. SECTIONS SHOW THE BUILDER HOW VARIOUS
PARTS ARE CONNECTED AND PLACED. DETAILS DO NOT HAVE A CUTTING-PLANE INDICATION BUT ARE SIMPLY NOTED
BY A DETAIL INDICATOR. THE CONSTRUCTION THAT ARE USUALLY SHOWN ARE:
DOORS
WINDOWS
EAVE DETAIL FOR A SIMPLE TYPE OF CORNICE
OTHER DETAILS THAT ARE CUSTOMARILY SHOWN ARE:
SILLS
GIRDER AND JOINT CONNECTIONS
STAIRWAYS
PREPARED BY: IDr. WILAN DAYRIT
SHEET DRAWN BY: K. S. V. TALOZA
SAMPLE CONSTRUCTION DETAIL OF RECEPTION DESK
NOTES:
1556
763
DARK OAK WOOD
VENEER
500
250
448
750MM
637
332
1085
1650
A
AREA 1: INTERIOR DESIGN OFFICE
1
RECEPTION DESK PLAN VIEW
SCALE
1:45
DARK OAK WOOD
VENEER
960MM
760
RECEPTION DESK FRONT VIEW
SCALE
1:45
MTRS.
960MM
ID - 13
ID - 13
1:45
WALL SECTION IS A TYPICAL SECTION THAT IS IDENTIFIED BY NAME
AND/OR SIZE. IT SHOWS THE CONSTRUCTION OF THE WALL, AS WELL AS
THE WAY IN WHICH STRUCTURAL MEMBERS AND OTHER FEATURES ARE
JOINED TO IT LOOKS WHEN CUT VERTICALLY BY A CUTTING PLANE.
TYPICAL SECTIONS. TYPICAL SECTIONS ARE USED TO SHOW
CONSTRUCTION FEATURES THAT ARE REPEATED MANY TIMES
THROUGHOUT A STRUCTURE.
SPECIFIC SECTIONS. WHEN A PARTICULAR CONSTRUCTION FEATURE
OCCURS ONLY ONCE AND IS NOT SHOWN CLEARLY IN THE GENERAL
DRAWING, A CUTTING PLANE IS PASSED THROUGH THAT PORTION.
RECEPTION DESK ISOMETRIC VIEW
SCALE
1:45
MTRS.
FINISHING NAIL
3
4" THK DARK OAK WOOD
BLIND NAIL
2" X 2" LUMBER
FINISHING NAIL
3
4" THK DARK
OAK WOOD
12.7MM (1 2") THK PLYWOOD
AREA 1: INTERIOR DESIGN OFFICE
7
ID - 13
RECEPTION DESK BLOW UP A
SCALE
1:45
MTRS.
AREA 1: INTERIOR DESIGN OFFICE
RECEPTION DESK REAR VIEW
SCALE
9
DARK OAK WOOD
VENEER
AREA 1: INTERIOR DESIGN OFFICE
3
AREA 1: INTERIOR DESIGN OFFICE
IN CONSTRUCTION DETAIL, LABELS AND DIMENSIONS ON ORTHOGRAPIC
VIEWS ARE A MUST.
LABELS ARE ALSO IMPORTANT IN THE CROSS SECTIONS.
THE FURNITURE CAN ALSO BE SHOWN ON ISOMETRIC OR PERSPECTIVE
VIEW.
THE CLOSER THE OBJECT IS TO YOU, THE THICKER THE LINE VALUE
SHOULD BE. THE LINE VALUE USED IS 0.30 & 0.10.
THE RECOMMENDED SCALE FOR CONSTRUCTION DETAIL ARE 1:20 AND
1:30.
AREA 1: INTERIOR DESIGN OFFICE
2
THE OUTLINE OF THE
FURNITURE SHOULD
BE THICKER. THE LINE
VALUES USED FOR
FURNITURE ISOMETRIC/
PERSPECTIVE VIEW
ARE 0.40, 0.20 & 0.10.
PERSPECTIVE IS MOST
RECOMMENDED HERE.
ID - 13
MTRS.
200
ID - 13
CONSTRUCTION DETAIL DRAWINGS ARE DRAWN TO A LARGER SCALE THAN
PLANS AND ELEVATIONS TO GIVE MORE ELABORATE INFORMATION, DIMENSIONS,
AND DETAILS OF A CERTAIN FURNITURE OR FEATURE THAT ARE TO BE
CONSTRUCTED.
IT ALSO SHOWS THE PLACEMENT OF PARTS IN RELATION TO EACH OTHER AND
INDICATE THE TYPE OF MATERIALS USED.
IT INCLUDES:
PLAN VIEW
FRONT VIEW
REAR VIEW
SIDE VIEWS
SECTION DETAIL
BLOW UP DETAIL
PERSPECTIVE OR ISOMETRIC VIEW
SECTION DETAILS ARE DRAWN TO A LARGE SCALE SHOWING DETAILS OF A
PARTICULAR CONSTRUCTION FEATURE THAT CANNOT BE GIVEN IN A GENERAL
DRAWING. THEY SHOW:
HEIGHT
MATERIALS
FASTENING AND SUPPORT SYSTEMS
ANY CONCEALED FEATURES
B
80 330 170 170 200
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
2650MM
MTRS.
4
ID - 13
RECEPTION DESK SIDE VIEW
SCALE
1:45
MTRS.
2" X 2" LUMBER
FINISHING NAIL
BLOW UP A
BLIND NAIL
12.7MM (1 2") THK PLYWOOD
AREA 1: INTERIOR DESIGN OFFICE
5
ID - 13
AREA 1: INTERIOR DESIGN OFFICE
RECEPTION DESK SECTION A
SCALE
1:45
MTRS.
6
ID - 13
AREA 1: INTERIOR DESIGN OFFICE
RECEPTION DESK SECTION B
SCALE
1:45
MTRS.
8
ID - 13
RECEPTION DESK BLOW UP B
SCALE
1:45
MTRS.
PREPARED BY: IDr. WILAN DAYRIT
SHEET DRAWN BY: K. S. V. TALOZA
SAMPLE CONSTRUCTION DETAIL OF BUILT-IN CABINET
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
A
1
ID - 14
BUILT-IN CABINET PLAN VIEW
SCALE
1:20
MTRS.
3
ID - 14
BUILT-IN CABINET PERSPECTIVE
NOT
TO
SCALE
5
ID - 14
BUILT-IN CABINET BLOW UP A
SCALE
1:20
MTRS.
TO FIT
400MMx400MMx
250MM
SAFETY DEPOSIT
2
ID - 14
BUILT-IN CABINET FRONT VIEW
SCALE
1:20
MTRS.
4
ID - 14
BUILT-IN CABINET ELEVATION A
SCALE
1:20
MTRS.
6
ID - 14
BUILT-IN CABINET SECTION A
SCALE
1:20
MTRS.
PREPARED BY: IDr. WILAN DAYRIT
SAMPLE CONSTRUCTION DETAIL OF STAIRCASE
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
MID-LANDING
A
B
1
ID - 15
STAIRCASE PLAN VIEW
SCALE
1:50
2
ID - 15
MTRS.
2
ID - 15
STAIRCASE BLOW UP A
SCALE
1:10
MTRS.
STAIRCASE ELEVATION A
SCALE
1:50
4
MTRS.
ID - 15
5
ID - 15
STAIRCASE ELEVATION B
SCALE
1:50
MTRS.
STAIRCASE BLOW UP B
SCALE
1:10
MTRS.
PREPARED BY: IDr. WILAN DAYRIT
SAMPLE CONSTRUCTION DETAIL OF STAIRCASE
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
MID-LANDING
D
C
1
ID - 16
STAIRCASE PLAN VIEW
SCALE
1:50
2
ID - 16
3
MTRS.
ID - 16
STAIRCASE BLOW UP A
SCALE
1:10
MTRS.
STAIRCASE ELEVATION C
SCALE
1:50
4
MTRS.
5
ID - 16
ID - 16
STAIRCASE ELEVATION D
SCALE
1:50
MTRS.
STAIRCASE BLOW UP A
SCALE
1:10
MTRS.
PREPARED BY: IDr. WILAN DAYRIT
SAMPLE CONSTRUCTION DETAIL OF STAIRCASE
THE FOLLOWING DRAWINGS SHALL BE USED AS REFERENCE AND TEMPLATE FOR INTERIOR 4B (INT4B) OF UST-CFAD ID AND WILL NOT BE USED FOR OTHER PURPOSES.
MID-LANDING
2
ID - 17
1
ID - 17
STAIRCASE PERSPECTIVE
NOT
TO
SCALE
STAIRCASE PLAN VIEW
SCALE
1:50
MTRS.
PREPARED BY: IDr. WILAN DAYRIT
Area 1: Junior Suite w/ Loft – Ground Floor
Area Problem
Area Dimension
2-3 sentences
m x m = sqm.
Area Location
Floor number of the building, name of the building (Please refer to your master plans for the area location)
Area Description
3-6 sentences
Area Design Considerations
Area Design Objectives
Facilities
• Space Planning
• 3-5 objectives
• Principal Designer’s Office
• Flexibility of Space
• Lead Designer’s Office
Furniture and Fixtures Requirements
Facilities
Furniture/ Fixtures
No. of Pieces
Design Analysis
3-6 sentences
NOTES
• You are free to design and be creative on your area requirement sheet Be creative!
• The paper size depends on what size of paper will be used for the entire area plate.
Equipment Requirements
Facilities
Equipment
No. of Pieces