DC
DC Fan
DC Fan 40 mm sq.
40×40×15 mm
San Ace 40 9GA type Low Power Consumption Fan
■ General Specifications
・ Material ………………………………………… Frame: Plastic (Flammability: UL 94V-0), Impeller: Plastic (Flammability: UL 94V-0)
・ Expected life …………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in free air at 60˚C,
rated voltage)
・ Motor protection function ………………… Locked rotor burnout protection, Reverse polarity protection
For details, please refer to p. 547.
・ Dielectric strength …………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
・ Insulation resistance………………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
・ Sound pressure level (SPL) ……………… At 1 m away from the air inlet
・ Storage temperature ……………………… -30 to +70˚C (Non-condensing)
・ Lead wire ………………………………………
Red Black Sensor Yellow Control Brown
(For models without PWM control function, there is no speed control wiring.)
・ Mass ……………………………………………… 28 g
■ Specifications
The models listed below have ribs and pulse sensors with PWM control function.
Rated voltage Operating voltage range
Model no.
[V]
[V]
12
9GA0412P7G001
10.2 to 13.8
PWM duty
cycle* [%]
Rated current Rated input Rated speed
[A]
100
[min-1]
[W]
0.17
2.04
Max. airflow
[m³/min]
13100
0.36
Max. static pressure
[CFM]
12.7
[Pa]
[inchH²O]
192
0.77
SPL
Operating temperature
[dB (A)]
[˚C]
Expected life
[h]
42
-20 to +70
40000/60˚C
(70000/40˚C)
SPL
Operating temperature
Expected life
[dB (A)]
[˚C]
[h]
-20 to +70
40000/60˚C
(70000/40˚C)
* PWM frequency: 25 kHz. Fan does not rotate when PWM duty cycle is 0%.
The following sensor and control options are available for selection.
Available for all models. Without sensor
Pulse sensor
Lock sensor
The models listed below have ribs and pulse sensors.
Rated voltage Operating voltage range Rated current Rated input Rated speed
Model no.
[V]
9GA0412G70 01
9GA0412H70 01
12
Max. airflow
Max. static pressure
[V]
[A]
[W]
[min-1]
[m³/min]
[CFM]
[Pa]
7 to 13.8
0.17
0.06
2.04
0.72
13100
7300
0.36
0.2
12.7
7.1
192
59.6
[inchH²O]
0.77
0.24
42
28
The following sensor and control options are available for selection.
Available for all models. Without sensor
Lock sensor
Differs according to the model. Refer to the table on p. 570. PWM control
■ Airflow - Static Pressure Characteristics / PWM Duty - Speed Characteristics Example
9GA0412P7G001 With pulse sensor with PWM control function
Operating voltage range
1.2
300
1.0
250
0.8
200
0.6
150
0.4
100
0.2
50
0
(inch H2O) (Pa)
12
VDC
DC12
V
Static静圧
pressure
Static 静圧
pressure
(inch H2O) (Pa)
PWM duty cycle
PWMデューティ
100%
50%
0
0.2
0.1
0
5
0.3
0.4
10
15
Airflow
風量
0.5 (m3/min)
(CFM)
(min-1)
PWM
duty cycle 100%
PWMデューティ100%
1.2
300
1.0
250
0.8
200
13.8 V
0.6
150
12 V
0.4
100
0.2
50
0
PWM duty - Speed characteristics example
15000
Voltage:
12 VDC
電圧：DC12
V
PWM
frequency:kHz
25 kHz
PWM周波数：25
13100 min-1
10.2 V
0
0.1
0
0.2
5
0.3
10
Airflow
風量
0.4 0.5 (m3/min)
(CFM)
15
回転速度
Fan
speed
PWM duty cycle
10000
5000
0
100 (%)
PWM
duty cycle
PWM
デューティサイクル
21
■ Airflow - Static Pressure Characteristics
9GA0412G7001 With pulse sensor
9GA0412H7001 With pulse sensor
Operating voltage range
Operating voltage range
300
1.0
250
0.8
200
13.8 V
0.6
150
12 V
0.4
100
0.2
50
0
(inch H2O) (Pa)
12
VDC
DC12
V
1.2
0.4
Static静圧
pressure
Static 静圧
pressure
(inch H2O) (Pa)
7V
0
0.1
0
0.2
5
0.4
10
15
Airflow
風量
0.3
0.2
0.1
0
0.5 (m3/min)
0.3
12
VDC
DC12
V
100
90
80
70
60
50
40
30
20
10
13.8 V
12 V
7V
0
0
(CFM)
0.05 0.1 0.15 0.2 0.25 (m3/min)
(CFM)
2
4
6
8
Airflow
風量
■ Dimensions (unit: mm) (With pulse sensor with PWM control function)
4-ø3.5±0.3
Mounting
取付用穴hole
(4)
15.2±0.5
(4)
32±0.3
40±0.3
+30
320 0
(10)
Lead
wire
リード線
AWG28
UL 1007
32±0.3
40±0.3
Rotating
direction
回転方向
Airflow
direction
風吹出方向
■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)
Inlet side, Outlet side
(17.6)
39
4-ø3.7
40
(17.6)
32±0.3
39
32±0.3
■ Options
Finger guards
Model no.: 109-059, 109-059H
22
page: p. 532