1.
2.
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
INSTRUMENT HOOKUP DRAWING
B12-24P PLATFORM
L&T Energy
Hydrocarbon
LARSEN & TOUBRO LIMITED
SL.NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
DESCRIPTION
INSTRUMENT HOOKUP DRAWING - COVER SHEET
INSTRUMENT HOOKUP DRAWING - INDEX
INSTRUMENT HOOKUP DRAWING - NOTES,BILL OF MATERIAL FOR TUBES & FITTING
INSTRUMENT HOOKUP DRAWING - PRESSURE GAUGE
INSTRUMENT HOOKUP DRAWING - PRESSURE GAUGE (VESSEL MOUNT/TANK MOUNTED)
INSTRUMENT HOOKUP DRAWING - PRESSURE GAUGE (LAUNCHER/RECEIVER MOUNTED)
INSTRUMENT HOOKUP DRAWING - DIFFERENTIAL PRESSURE INDICATOR
INSTRUMENT HOOKUP DRAWING - PRESSURE TRANSMITTER
INSTRUMENT HOOKUP DRAWING - PRESSURE TRANSMITTER
INSTRUMENT HOOKUP DRAWING - TEMPERATURE GAUGE
INSTRUMENT HOOKUP DRAWING - TEMPERATURE TRANSMITTER
INSTRUMENT HOOKUP DRAWING - MAGNETIC TYPE LEVEL GAUGE
INSTRUMENT HOOKUP DRAWING - TRANSPARENT TYPE LEVEL GAUGE
INSTRUMENT HOOKUP DRAWING - GWR LEVEL TRANSMITTER
INSTRUMENT HOOKUP DRAWING - ROTAMETER WITH TRANSMITTER
INSTRUMENT HOOKUP DRAWING - SHUTDOWN VALVES
INSTRUMENT HOOKUP DRAWING - FILED ORIFICE FLOW TRANSMITTER
INSTRUMENT HOOKUP DRAWING - LOW PILOT SWITCH (PNEUMATIC)
INSTRUMENT HOOKUP DRAWING - HI PILOT SWITCH (PNEUMATIC)
INSTRUMENT HOOKUP DRAWING - HI PILOT SWITCH (PNEUMATIC)
INSTRUMENT HOOKUP DRAWING - LOW PILOT SWITCH (PNEUMATIC)
INSTRUMENT HOOKUP DRAWING - LOW PILOT SWITCH (PNEUMATIC)
INSTRUMENT HOOKUP DRAWING - HI PILOT SWITCH (PNEUMATIC)
INSTRUMENT HOOKUP DRAWING - LEVEL SWITCH LOW (PNEUMATIC)
INSTRUMENT HOOKUP DRAWING - LEVEL SWITCH HIGH (PNEUMATIC)
B1
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
22-NOV-2024
REVISION DESCRIPTION
REV B1 : ISSUED FOR IDC
1.
2.
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
L&T Energy
Hydrocarbon
LARSEN & TOUBRO LIMITED
GENERAL NOTES;
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND GENERAL NOTES ON SHEET 3 OF
THIS DRAWING.
2. PIPE END OF ANY FIRST INSTRUMENT FITTINGS SHALL BE, SOCKET WELDED OR SCREWED AS PER PIPING CLASS.
3. INSTRUMENT SHALL BE MOUNTED REMOTELY AT 1.4 M ELEVATION (UNLESS IT IS SPECIFIED). FRO DIRECT MOUNTING
INSTRUMENTS TAPPING ON PIPING SHALL BE PROVIDED.
4. INSTRUMENT TUBE FITTINGS SHALL HAVE DOUBLE FERRULESS.
5. ALL IMPULESS TUBING SHALLL RUN WITH A SLOPE NOT LESS THAN 1:12 EXCEPT WHERE OTHERWISE SPECIFIED.
DIRECTION OF THE SLOPE IS TO BE DOWNWARD FROM THE PROCESS FOR GAS SERVICE APPLICATIONS AND UPWARD
FROM THE PROCESS FOR LIQUID SERVICES APPLICATIONS AND UPWARD FROM THE PROCESS FOR GAS SERVICE APPILICATION.
6. ALL DP GAUGE & DP TYPE FLOW INSTURUMENT SHALL BE PROVIDED WITH EQUALIZATION ARRANGEMENT FORZERO CHECK.
7. ALL PIPE TUBE & TUBE LENGTHS TOBE VERIFIED AT SITE BEFORE CUTTING CUT ENDS SHALL BE SQUARE AND DE-BURRED.
ALL PIPES & TUBES SHALL BE THROUGHLY CLEANED INSTALLING.
8. FOR ALL APPLICATION, ALL PIPE &PIPE FITTINGS, TUBE & TUBE FITTINGS, MINIATURE VALVES SHALL MEET THE
REQUIREMENTS OF NACE MR-0175/ISO 15156-1,2,3 LATEST EDITION.
9. ALL FITTINGS SHALL HAVE HARDENSS NOT EXCEEDING RB 90.ALL THE FITTINGS END CONNECTIONS SHALL BE COMPATIBLE
TO TUBE OF HARDNESS IN THE RANGE BETWEEN RB 70 TO 79 AND HARDNESS FOR FITTINGS (FERRULES) SHALL BE SUCH
THAT,THERE IS A MINIMUM HARDNESS DIFFERENCE OF 5 TO 10 BETWEEN TUBE AND FITTINGS FOR BETTER SEALING.
10. MATERIAL FOR MINIATURE INSTRUMENT VALVES, INSTRUMENTS TUBE &TUBE FITTINGS FOR INSTRUMENT AIR SUPPLY TO
VALVES SHALL BE SS316(NACE) MINIMUN, FOR FP LOOPS SHALL BE 6MO.
11. THE UNITS OF MTO ITEMS SHALL BE AS FOLLOWS.
SL.NO
ITEMS
UNITS
1.
2.
3.
4.
5.
TUBE
TUBE FITTINGS
PIPE
PIPE FITTINGS
VALVES
METERS
NUMBERS
METERS
NUMBERS
NUMBERS
12. MATING FLANGE , BOLTS, NUTS & GASKETS FOR PSV, RO, SAPCV & INLINE INSTRUMENTS BY PIPING.
13. INSTRUMENTS SHALL BE LOCATED ABOVE TAPPING ELEVATION FOR GAS SERVICE & BELOW TAPPING ELEVATON FOR
LIQUID SERVICE.
14. TUBING SHALL BE OF 316 /316L (DUAL CERTIFIED) MATERIAL TO ASTM A 269 OR UNS S31254 OR EQUIVALENT UNLESS
OTHERWISE SPECIFIED.
15. ALL LEVEL INSTRUMENT FOR SOUR/CORROSIVE CHEMICAL SERVICE.THE INSTRUMENT VENT/DRAIN CONNECTOIN SHALL BE
ROUTED TO THE NEAREST VENT/DRAIN HEADER.
BILL OF MATERIAL FOR TUBES & FITTING
ITEM NO.
01
DOCUMENT NO.
LEGENDS:
PNEUMATIC LINE
IMPULSE LINE
SS 316
1260 m
102S
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS 316
216 Nos
103S
1/2" OD x 1/2" NPT(F) FEMALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS 316
94 Nos
104S
1/2" NPTM END CAP
SS 316
65 Nos
105S
1/2" OD - TUBE UNION TEE COMPR. TYPE WITH
DOUBLE FERRULES
SS 316
53 Nos
106S
1/2" NPTF GLOBE VALVE SCR`D
SS 316
77 Nos
107S
1/2" NPTM PIPE NIPPLE SMLS CONC SCH XXS,
3" LONG THREAD,
SS 316
18 NoS
108S
1/2" NPTF BALL VALVE SCR`D
SS 316
37 NoS
109S
1/4" OD x WALL THICKNESS 0.035" THK.
SS 316
222 m
110S
1/4" OD x 1/4" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS 316
50 Nos
111S
1/4" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS 316
37 NoS
112S
1/2" OD x 1/4" NPT(M) MALE TUBING CONN.COMP
DOUBLE FERRULES
SS 316
24 NoS
116S
1/2" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS 316
205 Nos
117S
3/4" NPT(M) x 1/2" NPT(M) SWAGE NIPPLE CONC.
THxTH SMLS,SCH.XXS
SS 316
6 NoS
123S
1/2" NPTM HEXAGONAL PLUG - SCREWED
SS 316
12 NoS
101DS
1/2" OD x WALL THICKNESS 0.065" THK.
SUPER DUPLEX
450 m
102DS
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SUPER DUPLEX
84 Nos
103DS
1/2" OD x 1/2" NPT(F) FEMALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SUPER DUPLEX
42 Nos
104DS
1/2" NPTM END CAP
SUPER DUPLEX
30 Nos
105DS
1/2" OD - TUBE UNION TEE COMPR. TYPE WITH
DOUBLE FERRULES
SUPER DUPLEX
48 Nos
106DS
1/2" NPTF GLOBE VALVE SCR`D
SUPER DUPLEX
30 Nos
108DS
1/2" NPTF BALL VALVE SCR`D
SUPER DUPLEX
12 NoS
109DS
1/4" OD x WALL THICKNESS 0.035" THK.
SUPER DUPLEX
72 m
110DS
1/4" OD x 1/4" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SUPER DUPLEX
12 Nos
111DS
1/4" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SUPER DUPLEX
12 NoS
112DS
1/2" OD x 1/4" NPT(M) MALE TUBING CONN.COMP
DOUBLE FERRULES
SUPER DUPLEX
12 NoS
116DS
1/2" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SUPER DUPLEX
75 Nos
101HA
1/2" OD x WALL THICKNESS 0.065" THK.
HASTELLOY-C
12 m
102HA
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
HASTELLOY-C
2 Nos
HASTELLOY-C
2 NoS
HASTELLOY-C
6 Nos
HASTELLOY-C
1 Nos
DUPLEX SS
180 m
DUPLEX SS
48 NoS
DUPLEX SS
24 NoS
INSTRUMENT SIGNAL ELECTRICAL LINE
106DSS
1/2" NPTF GLOBE VALVE- SCREWED
DUPLEX SS
12 No
108DSS
1/2" NPTF BALL VALVE, - SCREWED
DUPLEX SS
12 No
109DSS
1/4" OD x WALL THICKNESS 0.035" THK.
DUPLEX SS
72 m
110DSS
111DSS
112DSS
116DSS
1/4" OD X 1/4" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
1/4" OD - TUBE UNION COMPR. TYPE WITH
DOUBLE FERRULES
1/2" OD X 1/4" NPT(M) TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
1/2" OD - TUBE UNION COMPR. TYPE WITH
DOUBLE FERRULES
123HA
DUPLEX SS
12 No
DUPLEX SS
12 No
116HA
104HA
101DSS
DUPLEX SS
12 No
DUPLEX SS
30 NoS
TOTAL QTY.
1/2" OD x WALL THICKNESS 0.065" THK.
DOCUMENT TITLE
C2379-PR-B12-24P-PID-3000 TO 3018 PIPING & INSTRUMENTATION DIAGRAM
MATERIAL
101S
REFERENCE DOCUMENTS:
SL.NO.
DESCRIPTION
102DSS
103DSS
1/2" NPTM HEXAGONAL PLUG - SCREWED
1/2" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
1/2" NPTM END CAP
1/2" OD x WALL THICKNESS 0.065" THK.
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
1/2" OD X 1/2" NPT(F) TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
104DSS
1/2" NPTM END CAP
DUPLEX SS
12 No
105DSS
1/2" OD - TUBE UNION TEE COMPR. TYPE WITH
DOUBLE FERRULES
DUPLEX SS
12 No
1.
2.
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
L&T Energy
Hydrocarbon
LARSEN & TOUBRO LIMITED
PRESSURE GAUGE
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
PRESSURE GAUGE
PRESSURE GAUGE
1/2''NPT(F)
2 VALVE MANIFOLD
(NOTE-2)
BY PIPING
1/2''NPT(M)
(NOTE-4)
BY PIPING
1/2''NPT(M)
(NOTE-4)
BY INST.
BY INST.
1/2''NPT(F)
2 VALVE MANIFOLD
(NOTE-2)
S.NO INSTRUMENT TAGS
VERTICAL MOUNTING
SERVICE
S.NO INSTRUMENT TAGS
SERVICE
PIPE CLASS GAUGE SAVER/SNUBBER
24
B12-24P-PI-136
PROCESS LIQUIDS & VAPORS
E23
N/A
25
B12-24P-PI-144
PROCESS LIQUIDS & VAPORS
E23
N/A
26
B12-24P-PI-145
PROCESS LIQUIDS & VAPORS
E23
N/A
27
B12-24P-PI-146
PROCESS LIQUIDS & VAPORS
E23
N/A
28
B12-24P-PI-550
PROCESS LIQUIDS & VAPORS
E1N
N/A
1.
(NOTE-3)
HORIZONTAL MOUNTING
2. TWO VALVE MANIFOLD (1/2''NPTF) WITH INTEGRAL PLUG SHALL BE IN INSTRUMENT
VENDOR'S SCOPE.
3. PIPE ELBOWS SHALL BE PROVIDED BY PIPING.
PIPE CLASS GAUGE SAVER/SNUBBER
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
29
B12-24P-PI-117
ATMOSPHERIC AIR
A22
GAUGE SAVER / N/A
30
B12-24P-PI-221
ATMOSPHERIC AIR
A22
GAUGE SAVER / N/A
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
31
B12-24P-PI-800
PROCESS VAPORS
B1N
GAUGE SAVER / N/A
3
C2379-IN-GEN-MR-416
D1
DATA SHEET
32
B12-24P-PI-540
PROCESS LIQUIDS & VAPORS
E1N
N/A
33
B12-24P-PI-650
PROCESS LIQUIDS & VAPORS
E1N
N/A
34
B12-24P-PI-760
PROCESS LIQUIDS & VAPORS
E1N
GAUGE SAVER / N/A
35
B12-24P-PI-880
PROCESS LIQUIDS & VAPORS
E1N
N/A
36
B12-24P-PI-341
PROCESS LIQUIDS & VAPORS
D1N
N/A
37
B12-24P-PI-451
GAS UTILITY
B1N
N/A
38
B12-24P-PI-250
PROCESS LIQUIDS & VAPORS
E1N
N/A
1
B12-24P-PI-115
PROCESS LIQUIDS & VAPORS
E23
N/A
39
B12-24P-PI-570
PROCESS LIQUIDS & VAPORS
E1N
N/A
2
B12-24P-PI-116
PROCESS LIQUIDS & VAPORS
E23
N/A
40
B12-24P-PI-430
PROCESS LIQUIDS & VAPORS
E1N
N/A
3
B12-24P-PI-125
PROCESS LIQUIDS & VAPORS
E23
N/A
41
B12-24P-PI-230
PROCESS LIQUIDS & VAPORS
E1N
N/A
4
B12-24P-PI-143
PROCESS LIQUIDS & VAPORS
F1N
N/A
42
B12-24P-PI-210
PROCESS LIQUIDS & VAPORS
E1N
N/A
5
B12-24P-PI-150
PROCESS LIQUIDS & VAPORS
1/2"SS
N/A
43
B12-24P-PI-220
PROCESS LIQUIDS & VAPORS
E1N
N/A
6
B12-24P-PI-151
PROCESS LIQUIDS & VAPORS
F1N
N/A
44
B12-24P-PI-240
PROCESS LIQUIDS & VAPORS
E1N
N/A
7
B12-24P-PI-152
PROCESS LIQUIDS & VAPORS
F1N
N/A
45
B12-24P-PI-340
GAS UTILITY
D1N
N/A
8
B12-24P-PI-153
PROCESS LIQUIDS & VAPORS
F1N
N/A
46
B12-24P-PI-110
PROCESS LIQUIDS & VAPORS
1/2"SS
N/A
9
B12-24P-PI-160
PROCESS LIQUIDS & VAPORS
1/2"SS
N/A
47
B12-24P-PI-120
PROCESS LIQUIDS & VAPORS
1/2"SS
N/A
10
B12-24P-PI-161
PROCESS LIQUIDS & VAPORS
F1N
N/A
48
B12-24P-PI-130
PROCESS LIQUIDS & VAPORS
1/2"SS
N/A
11
B12-24P-PI-162
PROCESS LIQUIDS & VAPORS
F1N
N/A
49
B12-24P-PI-140
PROCESS LIQUIDS & VAPORS
1/2"SS
N/A
12
B12-24P-PI-163
PROCESS LIQUIDS & VAPORS
F1N
N/A
50
B12-24P-PI-111
PROCESS LIQUIDS & VAPORS
F1N
N/A
13
B12-24P-PI-114
PROCESS LIQUIDS & VAPORS
E23
N/A
51
B12-24P-PI-121
PROCESS LIQUIDS & VAPORS
F1N
N/A
14
B12-24P-PI-135
PROCESS LIQUIDS & VAPORS
E23
N/A
52
B12-24P-PI-131
PROCESS LIQUIDS & VAPORS
F1N
N/A
15
B12-24P-PI-154
PROCESS LIQUIDS & VAPORS
E23
N/A
53
B12-24P-PI-141
PROCESS LIQUIDS & VAPORS
F1N
N/A
16
B12-24P-PI-155
PROCESS LIQUIDS & VAPORS
E23
N/A
54
B12-24P-PI-112
PROCESS LIQUIDS & VAPORS
F1N
N/A
L&T Energy
17
B12-24P-PI-156
PROCESS LIQUIDS & VAPORS
E23
N/A
55
B12-24P-PI-122
PROCESS LIQUIDS & VAPORS
F1N
N/A
Hydrocarbon
18
B12-24P-PI-164
PROCESS LIQUIDS & VAPORS
E23
N/A
56
B12-24P-PI-132
PROCESS LIQUIDS & VAPORS
F1N
N/A
19
B12-24P-PI-165
PROCESS LIQUIDS & VAPORS
E23
N/A
57
B12-24P-PI-142
PROCESS LIQUIDS & VAPORS
F1N
N/A
20
B12-24P-PI-166
PROCESS LIQUIDS & VAPORS
E23
N/A
58
B12-24P-PI-113
PROCESS LIQUIDS & VAPORS
F1N
N/A
21
B12-24P-PI-126
PROCESS LIQUIDS & VAPORS
E23
N/A
59
B12-24P-PI-123
PROCESS LIQUIDS & VAPORS
F1N
N/A
22
B12-24P-PI-134
PROCESS LIQUIDS & VAPORS
E23
N/A
60
B12-24P-PI-133
PROCESS LIQUIDS & VAPORS
F1N
N/A
23
B12-24P-PI-124
PROCESS LIQUIDS & VAPORS
E23
N/A
NO. OF INSTALLATION
60
LARSEN & TOUBRO LIMITED
PRESSURE GAUGE (VESSEL MOUNT/TANK MOUNTED)
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
2. TWO VALVE MANIFOLD (1/2''NPTF) WITH INTEGRAL PLUG SHALL BE IN INSTRUMENT
VENDOR'S SCOPE.
3. 1/2'' NPTM CONNECTION SHALL BE PROVIDED BY PIPING AT PIPING END.
PRESSURE GAUGE
BY INST.
1/2''NPT(F)
2 VALVE MANIFOLD
(NOTE-2)
BY PIPING
1/2''NPT(M)
(NOTE-3)
1.
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-416
D1
DATA SHEET
VESSEL
VERTICAL MOUNTING
S.NO INSTRUMENT TAGS
1
B12-24P-PI-490
SERVICE
GAS INSTRUMENT
NO. OF INSTALLATION
PIPE CLASS GAUGE SAVER&SNUBBER
B1N
N/A
01
L&T Energy
Hydrocarbon
LARSEN & TOUBRO LIMITED
PRESSURE GAUGE (LAUNCHER/RECEIVER MOUNTED)
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
PRESSURE GAUGE
PRESSURE GAUGE
2. TWO VALVE MANIFOLD (1/2''NPTF) WITH INTEGRAL PLUG SHALL BE IN INSTRUMENT
VENDOR'S SCOPE.
3. PIPE ELBOWS SHALL BE PROVIDED BY PIPING.
4. 1/2'' NPTM CONNECTION SHALL BE PROVIDED BY PIPING AT PIPING END.
BY INST.
1/2''NPT(F)
1/2''NPT(F)
BY INST.
BY PIPING
1/2''NPT(M)
(NOTE-4)
1/2''NPT(M)
BY PIPING
(NOTE-4)
2 VALVE MANIFOLD
(NOTE-2)
1.
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-416
D1
DATA SHEET
(NOTE-3)
LAUNCHER/RECEIVER
S.NO INSTRUMENT TAGS
SERVICE
PIPE CLASS GAUGE SAVER/SNUBBER
1
B12-24P-PI-431
PROCESS LIQUIDS & VAPORS
E1N
YES,GAUGE SAVER
2
B12-24P-PI-432
PROCESS LIQUIDS & VAPORS
E1N
-
3
B12-24P-PI-541
PROCESS LIQUIDS & VAPORS
E1N
YES
4
B12-24P-PI-542
PROCESS LIQUIDS & VAPORS
E1N
-
5
B12-24P-PI-571
PROCESS LIQUIDS & VAPORS
E1N
-
6
B12-24P-PI-572
PROCESS LIQUIDS & VAPORS
E1N
YES
7
B12-24P-PI-651
PROCESS LIQUIDS & VAPORS
E1N
YES
8
B12-24P-PI-652
PROCESS LIQUIDS & VAPORS
E1N
-
9
B12-24P-PI-761
PROCESS LIQUIDS & VAPORS
E1N
YES
10
B12-24P-PI-762
PROCESS LIQUIDS & VAPORS
E1N
YES
11
B12-24P-PI-881
PROCESS LIQUIDS & VAPORS
E1N
-
12
B12-24P-PI-882
PROCESS LIQUIDS & VAPORS
E1N
YES
NO. OF INSTALLATION
12
L&T Energy
Hydrocarbon
LARSEN & TOUBRO LIMITED
DIFFERENTIAL PRESSURE INDICATOR
BILL OF MATERIAL
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
ITEM
NO.
DESCRIPTION
TOTAL
MATERIAL QTY. 2. FIVE VALVE MANIFLOD (1/2"NPTF) WITH INTEGRAL PLUG AND MOUNTING CLAMP
SHALL BE IN INSTUMENT VENDOR`S SCOPE.
101S
1/2" OD x WALL THICKNESS 0.065" THK.
SS 316
15 m
102S
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS 316L
2 Nos
103S
1/2" OD x 1/2" NPT(F) FEMALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS 316L
2 Nos
116S
1/2" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS 316L
2 Nos
3. 1/2'' NPTM CONNECTION SHALL BE PROVIDED BY PIPING AT PIPING END.
TAG LIST
TAGS
S.NO INSTRUMENT
1
DIFFERENTIAL PRESSURE INDICATOR
(DETAIL-A)
B12-24P-PDI-820
SERVICE
PIPE CLASS
VENT GAS
B1N
NO. OF INSTALLATION
01
1.
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-416
D1
DATA SHEET
5 VALVE MANIFLOD
(NOTE-2)
102S
102S
116S
116S
2" PIPE
(H)
SLOPE 1:12
(L)
SLOPE 1:12
2" PIPE SUPPORT
NOTE-2
FLOW
101S
101S
FLAME ARRESTER
DETAIL-A
103S
103S
BY PIPING
1/2''NPT(F)
(NOTE-3)
BY INST.
1/2''NPT(M)
BY PIPING
1/2''NPT(M)
(NOTE-3)
BY INST.
1/2''NPT(F)
L&T Energy
Hydrocarbon
LARSEN & TOUBRO LIMITED
PRESSURE TRANSMITTER
ITEM
NO.
PRESSURE TRANSMITTER
BILL OF MATERIAL
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
DESCRIPTION
2. TWO VALVE MANIFOLD (1/2''NPTF) WITH INTEGRAL PLUG SHALL BE IN INSTRUMENT
VENDOR'S SCOPE.
3. 1/2'' NPTM CONNECTION SHALL BE PROVIDED BY PIPING AT PIPING END.
4. ALL GAS SERVICE INSTRUMENTS SHALL BE MOUNTED ON ABOUE THE MEASURING
POINTAND SLOPE SHALL BE A MINIMUM OF 1:12 TOWARDS THE MEASURING POINTS.
MATERIAL QTY. QTY.
101DSS 1/2" OD x WALL THICKNESS 0.065" THK.
SUPER DUPLEX
15 m
270 m
102DSS 1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
103DSS 1/2" OD x 1/2" NPT(F) FEMALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SUPER DUPLEX
2 Nos
36 Nos
SUPER DUPLEX
1 No
18 Nos
104DSS 1/2" NPTM END CAP
SUPER DUPLEX
1 No
18 Nos
105DSS 1/2" OD - TUBE UNION TEE COMPR. TYPE WITH
DOUBLE FERRULES
SUPER DUPLEX
1 No
18 Nos
106DSS 1/2" NPTF GLOBE VALVE- SCREWED
SUPER DUPLEX
1 No
18 Nos
1/2" OD - TUBE UNION COMPR. TYPE WITH
DOUBLE FERRULES
4-20mA OUTPUT SIGNAL
SUPER DUPLEX
2 Nos
40 Nos
116DSS
1.
2 VALVE MANIFOLD
(NOTE-2)
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-412
D1
DATA SHEET
INTRGRAL PLUG
(NOTE-2)
102DSS
2" PIPE SUPPORT
105DSS
101DSS
116DSS
S
103DSS
S
101D
4)
E
T
2
(NO PE 1:1 TS)
E
SLO POCK
(NO
S
102DS
S
S
D
4
10
S
S
D
6
10
116DSS
BY PIPING
1/2''NPT(M)
(NOTE-3)
S.NO INSTRUMENT TAGS
BY INST.
1/2''NPT(F)
SERVICE
PIPE CLASS
S.NO INSTRUMENT TAGS
SERVICE
PIPE CLASS
1
B12-24P-PT-114
PROCESS LIQUIDS & VAPORS
E23
13
B12-24P-PT-116
PROCESS LIQUIDS & VAPORS
E23
2
B12-24P-PT-124
PROCESS LIQUIDS & VAPORS
E23
14
B12-24P-PT-126
PROCESS LIQUIDS & VAPORS
E23
3
B12-24P-PT-134
PROCESS LIQUIDS & VAPORS
E23
15
B12-24P-PT-136
PROCESS LIQUIDS & VAPORS
E23
4
B12-24P-PT-144
PROCESS LIQUIDS & VAPORS
E23
16
B12-24P-PT-146
PROCESS LIQUIDS & VAPORS
E23
5
B12-24P-PT-154
PROCESS LIQUIDS & VAPORS
E23
17
B12-24P-PT-156
PROCESS LIQUIDS & VAPORS
E23
6
B12-24P-PT-164
PROCESS LIQUIDS & VAPORS
E23
18
B12-24P-PT-166
PROCESS LIQUIDS & VAPORS
E23
7
B12-24P-PT-115
PROCESS LIQUIDS & VAPORS
E23
8
B12-24P-PT-125
PROCESS LIQUIDS & VAPORS
E23
9
B12-24P-PT-135
PROCESS LIQUIDS & VAPORS
E23
10
B12-24P-PT-145
PROCESS LIQUIDS & VAPORS
E23
11
B12-24P-PT-155
PROCESS LIQUIDS & VAPORS
E23
12
B12-24P-PT-165
PROCESS LIQUIDS & VAPORS
E23
NO. OF INSTALLATION
18
L&T Energy
Hydrocarbon
LARSEN & TOUBRO LIMITED
PRESSURE TRANSMITTER
4-20mA
OUTPUT SIGNAL
2 VALVE MANIFOLD
(NOTE-2)
PRESSURE TRANSMITTER
INTRGRAL PLUG
(NOTE-2)
102S
BILL OF MATERIAL
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
ITEM
NO.
DESCRIPTION
101S
1/2" OD x WALL THICKNESS 0.065" THK.
SS316/SS316L
15 m
102S
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
1/2" OD x 1/2" NPT(F) FEMALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316/SS316L
2 Nos 74 Nos
2. TWO VALVE MANIFOLD (1/2''NPTF) WITH INTEGRAL PLUG SHALL BE IN INSTRUMENT
VENDOR'S SCOPE.
3. 1/2'' NPTM CONNECTION SHALL BE PROVIDED BY PIPING AT PIPING END.
4. ALL GAS SERVICE INSTRUMENTS SHALL BE MOUNTED ON ABOUE THE MEASURING
POINTAND SLOPE SHALL BE A MINIMUM OF 1:12 TOWARDS THE MEASURING POINTS.
SS316/SS316L
1 No
37 No
104S
1/2" NPTM END CAP
SS316/SS316L
1 No
37 No
105S
1/2" OD - TUBE UNION TEE COMPR. TYPE WITH
DOUBLE FERRULES
SS316/SS316L
1 No
37 No
106S
1/2" NPTF GLOBE VALVE- SCREWED
SS316/SS316L
1 No
37 No
116S
1/2" OD - TUBE UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS316/SS316L
2 Nos
75 Nos
103S
MATERIAL QTY. QTY.
555 m
2" PIPE SUPPORT
105S
101S
1.
116S
101S
)
E-4 :12
T
(NO PE 1 ETS)
SLO POCK
(NO
103S
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-412
D1
DATA SHEET
102S
106S
104S
116S
BY PIPING
1/2''NPT(M)
(NOTE-3)
S.NO INSTRUMENT TAGS
BY INST.
1/2''NPT(F)
SERVICE
PIPE CLASS
REMARK
S.NO INSTRUMENT TAGS
SERVICE
PIPE CLASS
REMARK
1
B12-24P-PT-113
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
21
B12-24P-PT-120
PROCESS LIQUIDS & VAPORS
1/2"SS/SS316L
2" PIPE STAND MOUNTED
2
B12-24P-PT-123
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
22
B12-24P-PT-130
PROCESS LIQUIDS & VAPORS
1/2"SS/SS316L
2" PIPE STAND MOUNTED
3
B12-24P-PT-133
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
23
B12-24P-PT-140
PROCESS LIQUIDS & VAPORS
1/2"SS/SS316L
2" PIPE STAND MOUNTED
4
B12-24P-PT-143
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
24
B12-24P-PT-150
PROCESS LIQUIDS & VAPORS
1/2"SS/SS316L
2" PIPE STAND MOUNTED
5
B12-24P-PT-153
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
25
B12-24P-PT-160
PROCESS LIQUIDS & VAPORS
1/2"SS/SS316L
2" PIPE STAND MOUNTED
6
B12-24P-PT-163
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
26
B12-24P-PT-111
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
7
B12-24P-PT-210
PROCESS LIQUIDS & VAPORS
E1N/SS316L
2" PIPE STAND MOUNTED
27
B12-24P-PT-121
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
8
B12-24P-PT-220
PROCESS LIQUIDS & VAPORS
E1N/SS316L
2" PIPE STAND MOUNTED
28
B12-24P-PT-131
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
9
B12-24P-PT-340
PROCESS LIQUIDS & VAPORS
D1N/SS316L
2" PIPE STAND MOUNTED
29
B12-24P-PT-141
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
10
B12-24P-PT-450
GAS UTILITY
B1N/SS316L
2" PIPE STAND MOUNTED
30
B12-24P-PT-151
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
11
B12-24P-PT-480
GAS UTILITY
B1N/SS316L
2" PIPE STAND MOUNTED
31
B12-24P-PT-161
PROCESS LIQUIDS & VAPORS
f1N/SS316L
2" PIPE STAND MOUNTED
12
B12-24P-PT-570
PROCESS LIQUIDS & VAPORS
E1N/SS316L
2" PIPE STAND MOUNTED
32
B12-24P-PT-112
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
13
B12-24P-PT-880
PROCESS LIQUIDS & VAPORS
E1N/SS316L
2" PIPE STAND MOUNTED
33
B12-24P-PT-122
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
14
B12-24P-PT-430
PROCESS LIQUIDS & VAPORS
E1N/SS316L
2" PIPE STAND MOUNTED
34
B12-24P-PT-132
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
L&T Energy
Hydrocarbon
15
B12-24P-PT-540
PROCESS LIQUIDS & VAPORS
E1N/SS316L
2" PIPE STAND MOUNTED
35
B12-24P-PT-142
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
16
B12-24P-PT-650
PROCESS LIQUIDS & VAPORS
E1N/SS316L
2" PIPE STAND MOUNTED
36
B12-24P-PT-152
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
17
B12-24P-PT-760
PROCESS LIQUIDS & VAPORS
E1N/SS316L
2" PIPE STAND MOUNTED
37
B12-24P-PT-162
PROCESS LIQUIDS & VAPORS
F1N/SS316L
2" PIPE STAND MOUNTED
18
B12-24P-PT-250
PROCESS LIQUIDS & VAPORS
E1N/SS316L
2" PIPE STAND MOUNTED
19
B12-24P-PT-230
PROCESS LIQUIDS & VAPORS
E1N/SS316L
2" PIPE STAND MOUNTED
20
B12-24P-PT-110
PROCESS LIQUIDS & VAPORS
1/2"SS/SS316L
2" PIPE STAND MOUNTED
NO. OF INSTALLATION
37
LARSEN & TOUBRO LIMITED
TEMPERATURE GAUGE
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
2. STUD, BOLTS. NUTS, GASKETS BY PIPING.
3. PROCESS CONNECTION;
ON PIPE-1 1/2''.
ON VESSEL-2''.
TEMPERATURE INDICATOR
COMPRESSION FITTING
FLANGED THERMOWELL
(NOTE-3)
TEMPERATURE INDICATOR
COMPRESSION FITTING
1.
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-413
D1
DATA SHEET
BY INST.
VENDOR
FLANGED THERMOWELL
(NOTE-3)
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
BY INST.
VENDOR
BY PIPING
(NOTE-2)
BY PIPING
(NOTE-2)
VERTICAL MOUNTING
S.NO INSTRUMENT TAGS
HORIZONTAL MOUNTING
SERVICE
PIPE CLASS
RATING
S.NO INSTRUMENT TAGS
SERVICE
PIPE CLASS
RATING
1
B12-24P-TI-240
PROCESS LIQUIDS & VAPORS
E1N/SS316L
1500# RTJ
11
B12-24P-TI-121
PROCESS LIQUIDS & VAPORS
E23
1500# RTJ
2
B12-24P-TI-211
PROCESS LIQUIDS & VAPORS
E1N/SS316L
1500# RTJ
12
B12-24P-TI-131
PROCESS LIQUIDS & VAPORS
E23
1500# RTJ
3
B12-24P-TI-221
PROCESS LIQUIDS & VAPORS
E1N/SS316L
1500# RTJ
13
B12-24P-TI-141
PROCESS LIQUIDS & VAPORS
E23
1500# RTJ
4
B12-24P-TI-113
PROCESS LIQUIDS & VAPORS
E23/DSS
1500# RTJ
14
B12-24P-TI-151
PROCESS LIQUIDS & VAPORS
E23
1500# RTJ
5
B12-24P-TI-123
PROCESS LIQUIDS & VAPORS
E23/DSS
1500# RTJ
15
B12-24P-TI-161
PROCESS LIQUIDS & VAPORS
E23
1500# RTJ
6
B12-24P-TI-133
PROCESS LIQUIDS & VAPORS
E23/DSS
1500# RTJ
16
B12-24P-TI-112
PROCESS LIQUIDS & VAPORS
E23
1500# RTJ
7
B12-24P-TI-143
PROCESS LIQUIDS & VAPORS
E23/DSS
1500# RTJ
17
B12-24P-TI-122
PROCESS LIQUIDS & VAPORS
E23
1500# RTJ
8
B12-24P-TI-153
PROCESS LIQUIDS & VAPORS
E23/DSS
1500# RTJ
18
B12-24P-TI-132
PROCESS LIQUIDS & VAPORS
E23
1500# RTJ
9
B12-24P-TI-163
PROCESS LIQUIDS & VAPORS
E23/DSS
1500# RTJ
19
B12-24P-TI-142
PROCESS LIQUIDS & VAPORS
E23
1500# RTJ
10
B12-24P-TI-111
PROCESS LIQUIDS & VAPORS
E23/DSS
1500# RTJ
20
B12-24P-TI-152
PROCESS LIQUIDS & VAPORS
E23
1500# RTJ
21
B12-24P-TI-162
PROCESS LIQUIDS & VAPORS
E23
1500# RTJ
22
B12-24P-TI-351
GAS UTILITY
D1N
900# RTJ
23
B12-24P-TI-340
GAS UTILITY
D1N
900# RTJ
24
B12-24P-TI-360
GAS UTILITY
D1N
900# RTJ
25
B12-24P-TI-451
GAS UTILITY
B1N
300# RF
NO. OF INSTALLATION
25
L&T Energy
Hydrocarbon
LARSEN & TOUBRO LIMITED
TEMPERATURE TRANSMITTER
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
2. STUD, BOLTS. NUTS, GASKETS BY PIPING.
3. PROCESS CONNECTION;
ON PIPE-1 1/2''.
ON VESSEL-2''.
4-20mA OUTPUT SIGNAL
FLANGED THERMOWELL
(NOTE-2)
TEMPERATURE INDICATOR
TEMP. TRANSMITTER
BY INST.
VENDOR
1.
BY PIPING
(NOTE-2)
VERTICAL MOUNTING
BY INST.VENDOR
VENDOR
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-412
D1
DATA SHEET
4-20mA OUTPUT SIGNAL
BY PIPING
(NOTE-2)
FLANGED THERMOWELL
(NOTE-2)
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
HORIZONTAL MOUNTING
S.NO INSTRUMENT TAGS
SERVICE
PIPE CLASS
RATING
1
B12-24P-TT-210
PROCESS LIQUIDS & VAPORS
E1N
1500#RTJ
2
B12-24P-TT-220
PROCESS LIQUIDS & VAPORS
E1N
1500#RTJ
3
B12-24P-TT-110
PROCESS LIQUIDS & VAPORS
E23
1500#RTJ
4
B12-24P-TT-120
PROCESS LIQUIDS & VAPORS
E23
1500#RTJ
5
B12-24P-TT-130
PROCESS LIQUIDS & VAPORS
E23
1500#RTJ
6
B12-24P-TT-140
PROCESS LIQUIDS & VAPORS
E23
1500#RTJ
7
B12-24P-TT-150
PROCESS LIQUIDS & VAPORS
E23
1500#RTJ
8
B12-24P-TT-160
PROCESS LIQUIDS & VAPORS
E23
1500#RTJ
9
B12-24P-TT-480
GAS UTILITY
B1N
300#RF
10
B12-24P-TT-450
GAS UTILITY
B1N
300#RF
11
B12-24P-TT-570
PROCESS LIQUIDS & VAPORS
E1N
1500#RTJ
12
B12-24P-TT-800
PROCESS LIQUIDS & VAPORS
V-800
300#RF
13
B12-24P-TT-430
PROCESS LIQUIDS & VAPORS
E1N
1500#RTJ
14
B12-24P-TT-540
PROCESS LIQUIDS & VAPORS
E1N
1500#RTJ
15
B12-24P-TT-650
PROCESS LIQUIDS & VAPORS
E1N
1500#RTJ
16
B12-24P-TT-760
PROCESS LIQUIDS & VAPORS
E1N
1500#RTJ
17
B12-24P-TT-880
PROCESS LIQUIDS & VAPORS
E1N
1500#RTJ
NO. OF INSTALLATION
17
L&T Energy
Hydrocarbon
LARSEN & TOUBRO LIMITED
MAGNETIC TYPE LEVEL GAUGE
BILL OF MATERIAL
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
ITEM
NO.
DESCRIPTION
2. STUD, BOLTS. NUTS, GASKETS BY PIPING.
101S
1/2" OD x WALL THICKNESS 0.065" THK.
BY INST.
VENDOR
107S
106S
6m
12 m
SS316L
1 No
2 Nos
SS316L
1 No
2 Nos
104S
106S
1/2" NPTF GLOBE VALVE- SCREWED
SS316L
2 Nos
4 Nos
107S
1/2" NPTM PIPE SMLS CONC SCH XXS, 3" LONG THREAD,
SS316L
2 Nos
4 Nos
123S
1/2" NPTM HEXAGONAL PLUG - SCREWED
SS316L
1 No
2 Nos
TAG LIST
BY INST.VENDOR
BY PIPING
(NOTE-2)
SS316/SS316L
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
1/2" NPTM END CAP
102S
123S
MATERIAL QTY. QTY.
S.NO
INSTRUMENT TAGS
SERVICE
RATING
1
B12-24P-LG-800
PROCESS LIQUIDS & VAPORS
150#
2
B12-24P-LG-820
GLYCOL & HYDROCARBON GAS
150#
NO. OF INSTALLATION
INST.VENDOR SCOPE
02
1.
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-407
D1
DATA SHEET
MAGNETIC LEVEL GAUGE
BY INST.VENDOR
VESSEL
BY PIPING
(NOTE-2)
BY INST.
VENDOR
107S
106S
102S
101S
104S
COAMING AREA
L&T Energy
Hydrocarbon
LARSEN & TOUBRO LIMITED
TRANSPARENT TYPE LEVEL GAUGE
BILL OF MATERIAL
BY PIPING
BY INST.VENDOR
BY PIPING
BY INST.VENDOR
ITEM
NO.
123S
BY INSTRUMENT
123HA
DESCRIPTION
MATERIAL
QTY. QTY.
101S
1/2" OD x WALL THICKNESS 0.065" THK.
SS316/SS316L
15 m
45 m
102S
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316L
1 No
3 Nos
SS316L
1 No
3 Nos
SS316/SS316L
4Nos
4Nos
123S
116S
BY INSTRUMENT
BY PIPING
BY INST.VENDOR
1/2" NPTM HEXAGONAL PLUG - SCREWED
1/2" OD - TUBE UNION COMPR. TYPE WITH
DOUBLE FERRULES
TAG LIST-TYPE-A
INSTRUMENT TAGS
SERVICE
S.NO
BY PIPING
BY INST.VENDOR
RATING
1
B12-24P-LG-340
PROCESS LIQUIDS & VAPORS
900RTJ
2
B12-24P-LG-490
PROCESS LIQUIDS & VAPORS
150#
3
B12-24P-LG-550
PROCESS LIQUIDS & VAPORS
1500RTJ
NO. OF INSTALLATION
VESSEL
ITEM
NO.
DESCRIPTION
MATERIAL
QTY. QTY.
101HA
1/2" OD x WALL THICKNESS 0.065" THK.
HASTELLOY-C
15 m
30 m
102HA
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
HASTELLOY-C
1 No
2 Nos
123HA
1/2" NPTM HEXAGONAL PLUG - SCREWED
HASTELLOY-C
1 No
2 Nos
116HA
1/2" OD - TUBE UNION COMPR. TYPE WITH
DOUBLE FERRULES
1/2" NPTM END CAP
HASTELLOY-C
6No
6Nos
HASTELLOY-C
1 No
1 Nos
104HA
S.NO
TAG LIST-TYPE-B
INSTRUMENT TAGS
SERVICE
TYPE-A
BY PIPING
BY INSTRUMENT
101S
116S
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-407
D1
DATA SHEET
B12-24P-LG-110
CHEMICAL
150#
2
B12-24P-LG-220
CHEMICAL
150#
02
BY PIPING
BY INSTRUMENT
101HA
102HA
116HA
TYPE-B
104S
0
BY INST.VENDOR
BY PIPING
BY INST.VENDOR
BY PIPING
BY INST.VENDOR
102S
BY INST.VENDOR
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
RATING
1
NO. OF INSTALLATION
1.
03
BILL OF MATERIAL
VESSEL
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
2. BALL VALVE, BOLTS, NUTS & GASKET SHALL BE SUPPLIED BY PIPING.
3. TRANSPARENT TYPE LEVEL GAUGE SHALL BE SUPPLIED BY INSTRUMENT VENDOR.
COAMING AREA
LEVEL GAUGE TRANSPARENT TYPE
104HA
COAMING AREA
L&T Energy
Hydrocarbon
LARSEN & TOUBRO LIMITED
GWR LEVEL TRANSMITTER
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
BILL OF MATERIAL
LEVEL TRANSMITTER
4-20MA
TO RTU
ITEM
NO.
DESCRIPTION
MATERIAL QTY. TOTAL 2. STUD, BOLTS. NUTS, GASKETS BY PIPING.
QTY.
101S
1/2" OD x WALL THICKNESS 0.065" THK.
SS 316
15 m
60 m
102S
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS 316
1 No
4 Nos
104S
1/2" NPTM END CAP
SS 316
1 No
4 Nos
106S
1/2" NPTF GLOBE VALVE- SCREWED
SS 316
2 Nos
8 Nos
107S
1/2" NPTM PIPE NIPPLE SMLS CONC SCH XXS,
3" LONG THREAD,
SS 316
2 Nos
8 Nos
116S
1/2" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS 316
1 No
10 Nos
123S
1/2" NPTM HEXAGONAL PLUG - SCREWED
SS 316
1 No
4 Nos
1.
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-DS-410
D1
DATA SHEET
107S
123S
106S
VESSEL
VENDOR SUPPLY
INST. VENDOR
BY PIPING
BY INST.
BY INST.
(NOTE-2)
107S
106S
102S
116S
101S
104S
TRIP DRAIN
L&T Energy
Hydrocarbon
S.NO INSTRUMENT TAGS
SERVICE
1
B12-24P-LT-800
LEVEL FOR CRUDE CONDENSATE VESSEL V-800
2
B12-24P-LT-820
LEVEL FOR GLYCOL SEAL POT V-820
3
B12-24P-LT-110
LEVEL FOR CORROSION INHIBITOR STORAGE TANK T-110
4
B12-24P-LT-220
LEVEL FOR BIOCIDE STORAGE TANK T-220
NO. OF INSTALLATION
04
LARSEN & TOUBRO LIMITED
ROTAMETER WITH TRANSMITTER
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
2. STUD, BOLTS. NUTS, GASKETS BY PIPING.
BY PIPING
3. MINIMUM STRAIGHT LENGTH OF 50 SHALL BE MAINTAINED AT UP STREAM.
BY INST.
(NOTE-2)
4-20mA OUTPUT SIGNAL
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-411
D1
DATA SHEET
BY INST.
1.
FLOW DIRECTION
FLOW DIRECTION
BY PIPING
(NOTE-2)
FRONT VIEW
SIDE VIEW
ROTAMETER WITH TRANSMITTER - TAG LIST
PIPE CLASS
S.NO INSTRUMENT TAGS
SERVICE
L&T Energy
Hydrocarbon
RATING
1
B12-24P-FT-110A
CORROSION INHIBITOR
E22
900#RTJ
2
B12-24P-FT-110B
BIOCIDE
E22
900#RTJ
3
B12-24P-FT-220A
BIOCIDE
E22
900#RTJ
4
B12-24P-FT-220B
BIOCIDE
E22
900#RTJ
NO. OF INSTALLATION
04
LARSEN & TOUBRO LIMITED
SHUTDOWN VALVES
BILL OF MATERIAL
ITEM
NO.
DESCRIPTION
101S
1/2" OD x WALL THICKNESS 0.065" THK.
102S
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
MATERIAL QTY. QTY.
3. 1/2" NPTM CONNECTION SHALL BE PROVIDED BY PIPING AT PIPING END.
SS316/SS316L
15 m
195 m
1/2" OD X 1/2" NPTM MALE TUBING CONN.COMP TYPE
WITH DOUBLE FERRULES
SS316L
3 Nos
39 Nos
103S
1/2" OD X 1/2" NPTF FEMALE TUBING CONN.COMP TYPE
WITH DOUBLE FERRULES
SS316L
1 No
13 Nos
108S
1/2" NPTF BALL VALVE SCR`D
SS316L
1 No
13 Nos
109S
1/4" OD x WALL THICKNESS 0.035" THK.
SS316/SS316L
6m
78 m
SS316L
1 No
13 Nos
SS316L
1 No
13 Nos
SS316L
2 Nos
30 Nos
110S
111S
116S
2. STUD, BOLTS. NUTS, GASKETS BY PIPING.
1/4" OD X 1/4" NPTM MALE TUBING CONN.COMP TYPE
WITH DOUBLE FERRULES
1/4" OD - TUBE UNION COMPR. TYPE WITH
DOUBLE FERRULES
1/2" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
1.
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-PP-GEN-DS-406
C1
DATA SHEET
102S
116S
101S
102S
AFR
(NOTE-2)
BY INST.
1/2''NPT(F)
116S
101S
108S
109S
110S
(NOTE-2)
SIGNAL FROM
SDP-100
VENT
103S
XPV
BY PIPING
1/2''NPT(M)
(NOTE-3)
111S
INSTRUMENT
GAS HEADER
S.NO INSTRUMENT TAGS
VALVE VENDOR'S SCOPE
SERVICE
PIPE CLASS RATING
1
B12-24P-XSDV-570
FROM WELL FLUID LAUNCHER (L -570) TO C24-RP
PE1N
900#, RTJ
2
B12-24P-XSDV-801
UTILITY GAS FROM DPHE TO CRUDE CONDENSATE PUMPS P-300 A/B.
B1N
150#, RF
3
B12-24P-XSDV-550
FROM PIPE SEPERATOR (V-950) TO KO DRUM (V-340)
E1N
900#, RTJ
4
B12-24P-XSDV-112
FROM UTILITY GAS SYSTEM TO CHEMICAL INJECTION PUMPS P- 110A/B
B1N
150#, RF
5
B12-24P-XSDV-113
FROM CHEMICAL STORAGE TANK T- 110 TO CHEMICAL INJECTION PUMPS P-110A/B
E22
900#, RTJ
6
B12-24P-XSDV-221
ON BIOCIDE STORAGE TANK (T-220)
B1N
150#, RF
7
B12-24P-XSDV-220
FROM LP PRODUCTION HEADER TO DPHE (E-470)
E22
900#, RTJ
8
B12-24P-XSDV-540
FROM B12-18P2 WELL PLATFORM TO WELL FLUID GAS RECEIVER (R-540)
PE1N
900#, RTJ
9
B12-24P-XSDV-430
FROM B12-18P1 WELL PLATFORM TO WELL FLUID GAS RECEIVER (R-430)
PE1N
900#, RTJ
10
B12-24P-XSDV-760
FROM B12-11 WELL PLATFORM TO WELL FLUID GAS RECEIVER (R-760)
PE1N
900#, RTJ
11
B12-24P-XSDV-650
FROM B12-2P WELL PLATFORM TO WELL FLUID GAS RECEIVER (R-650)
PE1N
900#, RTJ
12
B12-24P-XSDV-880
FROM WELL FLUID LAUNCHER (L -880) TO B-12-11 WELL PLATFORM
PE1N
900#, RTJ
13
B12-24P-XSDV-800
FROM CRUDE CONDENSATE VESSEL V800 TO W/F PIPELINE
E1N
900#, RTJ
NO. OF INSTALLATION
13
SIGNAL TO RTU
XSDV
PIPING
INST.VENDOR
PIPING
(NOTE-2)
L&T Energy
Hydrocarbon
TRANSFER PUMP (P-800A/B) / PROCESS FLUID
LARSEN & TOUBRO LIMITED
FILED ORIFICE FLOW TRANSMITTER
BILL OF MATERIAL
ITEM
NO.
DESCRIPTION
101S
1/2" OD x WALL THICKNESS 0.065" THK.
102S
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
1/2" OD X 1/2" NPT(F) TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
1/2" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
103S
116S
2. STUD, BOLTS. NUTS, GASKETS BY PIPING.
SS316/SS316L
15 m
SS316L
2 Nos
SS316L
2 Nos
SS316L
3 Nos
4. FIVE WAY MANIFOLD (1/2" NPTF) WITH INTERGAL PLUG SHALL BE IN INSTRUMENT.
1.
2''
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-412
D1
DATA SHEET
PIP
ES
UP
PO
R
5V T
AL
VE
(NO MAN
TE- IFO
LD
4)
102S
BY
MATERIAL QTY.
3. 1/2" NPTM CONNECTOR SHALL BE PROVIDED BY PIPING AT PIPING END.
4-20mA
OUTPUT SIGNAL
BY
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
ING
P
I
P
T.
S
N
I
G
BY
IN
PIP
PE
116S
101S
1/2
BY
1/2 PIPIN
"N
G
PT
(M)
BY
1/2
PIP
"N
ING
PT
(M
BY
)
(NO
101S
SLO
103S
BY
IN
" N ST
PT
(F)
1:12
TE
-3)
1/2
INS
T
"N
PT
(F
)
L&T Energy
Hydrocarbon
DP TYPE FLOW TRANSMITTER - TAG LIST
S.NO INSTRUMENT TAGS
1
B12-24P-FT-480
SERVICE
PIPE CLASS
UTILITY GAS DISTRIBUTION HEADER
B1N
NO. OF INSTALLATION
01
LARSEN & TOUBRO LIMITED
LOW PILOT SWITCH (PNEUMATIC)
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
INSTRUMENT
GAS HEADER
BY PIPING
1/2''NPT(M)
(NOTE-3)
BY INST.
1/2''NPT(F)
103S
2. SUPPLIED BY INSTRUMENT VENDOR.
3. 1/2'' NPT(M) CONNECTION SHALL BE PROVIDED BY PIPING AT PIPING END.
101S
1.
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-414
D1
DATA SHEET
116S
102S
108S
110S
112S
(NOTE-2)
TO SDP
102S
101S
111S
109S
FILTER REG.
2 VALVE MANIFOLD
MOUNTING CLAMP
102S
BY PIPING
1/2''NPT(M)
(NOTE-3)
:12
BY INST.
1/2''NPT(F)
2" PIPE
SUPPORT
1
PE
SLO
101S
116S
VESSEL
101S
BILL OF MATERIAL
102S
S.NO INSTRUMENT TAGS
1
B12-24P-PSL-490
SERVICE
MATERIAL
GAS INSTRUMENT
NO. OF INSTALLATION
ITEM
NO.
DESCRIPTION
101S
1/2" OD x WALL THICKNESS 0.065" THK.
102S
SS316/SS316L
8m
15 m
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
1/2" OD X 1/2" NPT(F) TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316L
2 Nos
4 Nos
SS316L
1 No
1 Nos
108S
1/2" NPTF BALL VALVE, - SCREWED
SS316L
1 No
1 Nos
109S
1/2" OD x WALL THICKNESS 0.035" THK.
SS316L
3m
6m
110S
1/4" OD X 1/4" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
1/4" OD - TUBE UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS316L
1 No
1 Nos
SS316L
1 No
1 Nos
1/2" OD X 1/4" NPT(M) TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
1/2" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS316L
1 No
1 Nos
SS316L
1 NoS
3 Nos
103S
SS316L
01
MATERIAL QTY. QTY.
111S
112S
116S
L&T Energy
Hydrocarbon
LARSEN & TOUBRO LIMITED
HI PILOT SWITCH (PNEUMATIC)
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
INSTRUMENT
GAS HEADER
BY PIPING
1/2''NPT(M)
(NOTE-3)
BY INST.
1/2''NPT(F)
103S
2. SUPPLIED BY INSTRUMENT VENDOR.
3. 1/2'' NPT(M) CONNECTION SHALL BE PROVIDED BY PIPING AT PIPING END.
1.
116S
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-414
D1
DATA SHEET
102S
108S
110S
TO SDP
111S
102S
112S
(NOTE-2)
101S
109S
FILTER REG.
2 VALVE MAIFOLD
102S
MOUNTING CLAMP
105S
2" PIPE
SUPPORT
101S
BY PIPING
1/2''NPT(M)
(NOTE-3)
BY INST.
1/2''NPT(F)
1:12
E
OP
SL
101S
1/2" OD x WALL THICKNESS 0.065" THK.
102S
SS316L
4 NoS
SS316L
2 NoS
104S
1/2" NPTM END CAP
SS316L
1 No
105S
1/2" OD - TUBE UNION TEE COMPR. TYPE WITH
DOUBLE FERRULES
SS316L
1 No
106S
1/2" NPTF GLOBE VALVE- SCREWED
SS316L
1 No
108S
1/2" NPTF BALL VALVE, - SCREWED
SS316L
1 No
MATERIAL
109S
1/4" OD x WALL THICKNESS 0.035" THK.
SS316/SS316L
6m
SS316L
110S
1/4" OD X 1/4" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
1/4" OD - TUBE UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS316L
1 No
SS316L
1 No
1/2" OD X 1/4" NPT(M) TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
1/2" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS316L
1 No
SS316L
2 NoS
103S
103S
104S
SERVICE
GAS UTILITY
NO. OF INSTALLATION
101S
01
MATERIAL QTY.
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
1/2" OD X 1/2" NPT(F) TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
116S
B12-24P-PSH-450
DESCRIPTION
15 m
106S
1
ITEM
NO.
SS316/SS316L
102S
S.NO INSTRUMENT TAGS
BILL OF MATERIAL
111S
112S
116S
L&T Energy
Hydrocarbon
LARSEN & TOUBRO LIMITED
HI PILOT SWITCH (PNEUMATIC)
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
INSTRUMENT
GAS HEADER
BY PIPING
1/2''NPT(M)
(NOTE-3)
BY INST.
1/2''NPT(F)
103DSS
2. SUPPLIED BY INSTRUMENT VENDOR.
3. 1/2'' NPT(M) CONNECTION SHALL BE PROVIDED BY PIPING AT PIPING END.
101DSS
1.
116DSS
102DSS
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-414
D1
DATA SHEET
108DSS
112DSS
(NOTE-2)
110DSS
TO SDP
102DSS
101DSS
111DSS 109DSS
FILTER REG.
2 VALVE MAIFOLD
102DSS
MOUNTING CLAMP
105DSS
2" PIPE
SUPPORT
101DSS
BY PIPING
1/2''NPT(M)
(NOTE-3)
12
BY INST.
1/2''NPT(F)
1:
OPE
SL
101DSS
BILL OF MATERIAL
102DSS
106DSS
116DSS
103DSS
104DSS
S.NO INSTRUMENT TAGS
SERVICE
MATERIAL
ITEM
NO.
DESCRIPTION
MATERIAL QTY. QTY.
101DSS 1/2" OD x WALL THICKNESS 0.065" THK.
DUPLEX SS
15 m
90 m
102DSS 1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
103DSS 1/2" OD X 1/2" NPT(F) TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
DUPLEX SS
4 NoS
24 Nos
DUPLEX SS
2 NoS
12 Nos
104DSS 1/2" NPTM END CAP
DUPLEX SS
1 No
6 Nos
1/2" OD - TUBE UNION TEE COMPR. TYPE WITH
105DSS
DOUBLE FERRULES
DUPLEX SS
1 No
6 Nos
106DSS 1/2" NPTF GLOBE VALVE- SCREWED
DUPLEX SS
1 No
6 Nos
108DSS 1/2" NPTF BALL VALVE, - SCREWED
DUPLEX SS
1 No
6 Nos
1
B12-24P-PSH-110
PROCESS LIQUIDS & VAPORS
DUPLEX SS
2
B12-24P-PSH-120
PROCESS LIQUIDS & VAPORS
DUPLEX SS
109DSS 1/4" OD x WALL THICKNESS 0.035" THK.
DUPLEX SS
6m
36 m
3
B12-24P-PSH-130
PROCESS LIQUIDS & VAPORS
DUPLEX SS
DUPLEX SS
1 No
6 Nos
4
B12-24P-PSH-140
PROCESS LIQUIDS & VAPORS
DUPLEX SS
110DSS 1/4" OD X 1/4" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
1/4" OD - TUBE UNION COMPR. TYPE WITH
111DSS
DOUBLE FERRULES
DUPLEX SS
1 No
6 Nos
112DSS 1/2" OD X 1/4" NPT(M) TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
116DSS 1/2" OD - TUBE UNION COMPR. TYPE WITH
DOUBLE FERRULES
DUPLEX SS
1 No
6 Nos
DUPLEX SS
2 NoS
15 Nos
5
6
B12-24P-PSH-150
B12-24P-PSH-160
PROCESS LIQUIDS & VAPORS
PROCESS LIQUIDS & VAPORS
NO. OF INSTALLATION
06
DUPLEX SS
DUPLEX SS
L&T Energy
Hydrocarbon
LARSEN & TOUBRO LIMITED
LOW PILOT SWITCH (PNEUMATIC)
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
INSTRUMENT
GAS HEADER
BY PIPING
1/2''NPT(M)
(NOTE-3)
BY INST.
1/2''NPT(F)
103DSS
2. SUPPLIED BY INSTRUMENT VENDOR.
3. 1/2'' NPT(M) CONNECTION SHALL BE PROVIDED BY PIPING AT PIPING END.
1.
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-414
D1
DATA SHEET
116DSS
102DSS
108DSS
112DSS
110DSS
TO SDP
102DSS
101DSS
111DSS 109DSS
FILTER REG.
2 VALVE MAIFOLD
MOUNTING CLAMP
102DSS
105DSS
2" PIPE
SUPPORT
101DSS
BY PIPING
1/2''NPT(M)
(NOTE-3)
BY INST.
1/2''NPT(F)
E
LOP
1:12
S
101DSS
BILL OF MATERIAL
102DSS
106DSS
116DSS
103DSS
104DSS
S.NO INSTRUMENT TAGS
ITEM
NO.
DESCRIPTION
MATERIAL QTY. QTY.
101DSS 1/2" OD x WALL THICKNESS 0.065" THK.
DUPLEX SS
15 m
90 m
102DSS 1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
103DSS 1/2" OD X 1/2" NPT(F) TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
DUPLEX SS
4 NoS
24 Nos
DUPLEX SS
2 NoS
12 Nos
104DSS 1/2" NPTM END CAP
DUPLEX SS
1 No
6 Nos
DUPLEX SS
1 No
6 Nos
SERVICE
MATERIAL
1/2" OD - TUBE UNION TEE COMPR. TYPE WITH
105DSS
DOUBLE FERRULES
1
B12-24P-PSL-111
PROCESS LIQUIDS & VAPORS
DUPLEX SS
106DSS 1/2" NPTF GLOBE VALVE- SCREWED
DUPLEX SS
1 No
6 Nos
2
B12-24P-PSL-121
PROCESS LIQUIDS & VAPORS
DUPLEX SS
108DSS 1/2" NPTF BALL VALVE, - SCREWED
DUPLEX SS
1 No
6 Nos
3
B12-24P-PSL-131
PROCESS LIQUIDS & VAPORS
DUPLEX SS
109DSS 1/4" OD x WALL THICKNESS 0.035" THK.
DUPLEX SS
6m
36 m
110DSS 1/4" OD X 1/4" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
1/4" OD - TUBE UNION COMPR. TYPE WITH
111DSS
DOUBLE FERRULES
DUPLEX SS
1 No
6 Nos
DUPLEX SS
1 No
6 Nos
112DSS 1/2" OD X 1/4" NPT(M) TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
116DSS 1/2" OD - TUBE UNION COMPR. TYPE WITH
DOUBLE FERRULES
DUPLEX SS
1 No
6 Nos
DUPLEX SS
2 NoS
15 Nos
4
B12-24P-PSL-141
PROCESS LIQUIDS & VAPORS
DUPLEX SS
5
B12-24P-PSL-151
PROCESS LIQUIDS & VAPORS
DUPLEX SS
6
B12-24P-PSL-161
PROCESS LIQUIDS & VAPORS
DUPLEX SS
NO. OF INSTALLATION
06
L&T Energy
Hydrocarbon
LARSEN & TOUBRO LIMITED
LOW PILOT SWITCH (PNEUMATIC)
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
INSTRUMENT
GAS HEADER
BY PIPING
1/2''NPT(M)
(NOTE-3)
BY INST.
1/2''NPT(F)
103S
2. SUPPLIED BY INSTRUMENT VENDOR.
3. 1/2'' NPT(M) CONNECTION SHALL BE PROVIDED BY PIPING AT PIPING END.
101S
1.
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-414
D1
DATA SHEET
102S
108S
102S
(NOTE-2)
110S
112S
TO SDP
101S
111S
109S
FILTER REG.
2 VALVE MAIFOLD
102S
MOUNTING CLAMP
105S
2" PIPE
SUPPORT
101S
BY PIPING
1/2''NPT(M)
(NOTE-3)
BY INST.
1/2''NPT(F)
BILL OF MATERIAL
101S
102S
106S
101S
103S
104S
S.NO INSTRUMENT TAGS
1
2
3
4
B12-24P-PSL-341
B12-24P-PSL-571
B12-24P-PSL-431
B12-24P-PSL-541
SERVICE
MATERIAL
PROCESS LIQUIDS & VAPORS
SS316L
PROCESS LIQUIDS & VAPORS
PROCESS LIQUIDS & VAPORS
PROCESS LIQUIDS & VAPORS
SS316L
PROCESS LIQUIDS & VAPORS
SS316L
6
B12-24P-PSL-761
PROCESS LIQUIDS & VAPORS
SS316L
7
B12-24P-PSL-881
PROCESS LIQUIDS & VAPORS
SS316L
GAS UTILITY
NO. OF INSTALLATION
101S
1/2" OD x WALL THICKNESS 0.065" THK.
102S
15 m
120 m
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316L
5 Nos
32 Nos
103S
1/2" OD x 1/2" NPT(F) FEMALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316L
2 Nos
16 Nos
104S
1/2" NPTM END CAP
SS316L
1 No
8 Nos
105S
1/2" OD - TUBING UNION TEE COMPR. TYPE WITH
DOUBLE FERRULES
SS316L
1 No
8 Nos
106S
1/2" NPTF GLOBE VALVE- SCREWED
SS316L
1 No
8 Nos
108S
1/2" NPTF BALL VALVE SCR`D
SS316L
1 No
8 Nos
109S
1/4" OD x WALL THICKNESS 0.035" THK.
SS316/SS316L
6m
48 m
110S
1/4" OD x 1/4" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316L
1 No
8 Nos
111S
1/4" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS316L
1 No
8 Nos
112S
1/2" OD x 1/4" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316L
1 No
8 Nos
116S
1/2" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS316L
2 Nos
20 Nos
SS316L
08
MATERIAL QTY. TOTAL
QTY.
SS316/SS316L
SS316L
B12-24P-PSL-651
B12-24P-PSL-451
DESCRIPTION
L&T Energy
Hydrocarbon
SS316L
5
8
ITEM
NO.
LARSEN & TOUBRO LIMITED
HI PILOT SWITCH (PNEUMATIC)
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
INSTRUMENT
GAS HEADER
BY PIPING
1/2''NPT(M)
(NOTE-3)
BY INST.
1/2''NPT(F)
103S
2. SUPPLIED BY INSTRUMENT VENDOR.
3. 1/2'' NPT(M) CONNECTION SHALL BE PROVIDED BY PIPING AT PIPING END.
101S
1.
102S
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-414
D1
DATA SHEET
108S
110S
TO SDP
111S
102S
112S
(NOTE-2)
101S
109S
FILTER REG.
2 VALVE MAIFOLD
MOUNTING CLAMP
102S
105S
2" PIPE
SUPPORT
101S
BY PIPING
1/2''NPT(M)
(NOTE-3)
BY INST.
1/2''NPT(F)
SL
1:12
E
OP
BILL OF MATERIAL
101S
102S
106S
101S
103S
104S
S.NO INSTRUMENT TAGS
1
B12-24P-PSH-570
SERVICE
MATERIAL
PROCESS LIQUIDS & VAPORS
ITEM
NO.
DESCRIPTION
101S
1/2" OD x WALL THICKNESS 0.065" THK.
102S
SS316/SS316L
15 m
120 m
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316L
4 Nos
32 Nos
103S
1/2" OD x 1/2" NPT(F) FEMALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316L
2 Nos
16 Nos
104S
1/2" NPTM END CAP
SS316L
1 No
8 Nos
105S
1/2" OD - TUBING UNION TEE COMPR. TYPE WITH
DOUBLE FERRULES
SS316L
1 No
8 Nos
106S
1/2" NPTF GLOBE VALVE- SCREWED
SS316L
1 No
8 Nos
108S
1/2" NPTF BALL VALVE SCR`D
SS316L
1 No
8 Nos
109S
1/4" OD x WALL THICKNESS 0.035" THK.
SS316/SS316L
6m
48 m
1/4" OD x 1/4" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316L
1 No
8 Nos
SS316L
2
B12-24P-PSH-430
PROCESS LIQUIDS & VAPORS
SS316L
3
B12-24P-PSH-540
PROCESS LIQUIDS & VAPORS
SS316L
4
B12-24P-PSH-650
PROCESS LIQUIDS & VAPORS
SS316L
MATERIAL QTY. TOTAL
QTY.
Hydrocarbon
5
B12-24P-PSH-760
PROCESS LIQUIDS & VAPORS
SS316L
110S
6
B12-24P-PSH-880
PROCESS LIQUIDS & VAPORS
SS316L
111S
1/4" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS316L
1 No
8 Nos
7
B12-24P-PSH-340
PROCESS LIQUIDS & VAPORS
SS316L
112S
1/2" OD x 1/4" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316L
1 No
8 Nos
116S
1/2" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS316L
2 Nos
20 Nos
8
B12-24P-PSH-570
PROCESS LIQUIDS & VAPORS
NO. OF INSTALLATION
08
SS316L
L&T Energy
LARSEN & TOUBRO LIMITED
LEVEL SWITCH LOW (PNEUMATIC)
BILL OF MATERIAL
102S
101S
112S
BY INST.
(NOTE-5)
1/2''NPT(M)
(NOTE-3)
103S
108S
1/2''NPT(F)
BY PIPING
101S
116S
(NOTE-6)
INSTRUMENT
GAS HEADER
LEVEL SWITCH
ITEM
NO.
DESCRIPTION
MATERIAL QTY. TOTAL
QTY.
101S
1/2" OD x WALL THICKNESS 0.065" THK.
SS316
15 m
45 m
102S
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316
3 Nos
9 Nos
103S
1/2" OD x 1/2" NPT(F) FEMALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316
1 No
3 Nos
104S
1/2" NPTM END CAP
SS316
1 No
3 Nos
106S
1/2" NPTF GLOBE VALVE SCR`D
SS316
2 Nos
6 Nos
107S
1/2" NPTM PIPE NIPPLE SMLS CONC SCH XXS,
3" LONG THREAD,
SS316
1 No
3 Nos
108S
1/2" NPTF BALL VALVE SCR`D
SS316
1 No
3 Nos
109S
1/4" OD x WALL THICKNESS 0.035" THK.
SS316
6m
18 m
110S
1/4" OD x 1/4" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316
3 Nos
110S
SIGNAL TO
SDP
109S
110S
111S
1/4" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS316
1 No
3 Nos
112S
1/2" OD x 1/4" NPT(M) MALE TUBING CONN.COMP
DOUBLE FERRULES
SS316
1 No
3 Nos
116S
1/2" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS316
2 NoS
8 Nos
117S
3/4" NPT(M) x 1/2" NPT(M) SWAGE NIPPLE CONC.
THxTH SMLS,SCH.XXS
SS316
1 No
3 Nos
123S
1/2" NPTM HEXAGONAL PLUG - SCREWED
SS316
1 No
3 Nos
111S
109S
117S
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-408
D1
DATA SHEET
TAG LIST
123S
S.NO INSTRUMENT TAGS
106S
BY PIPING
2'' (NOTE-2)
1.
9 Nos
FILTER REG.
110S
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
2. BOLTS, NUTS & GASKETS BY PIPING.
3. LEVEL SWITCH DRAIN/VENT SHALL BE CARRIED TO NEAREST CLOSED DRAIN/
VENT HEADER.
4. PIPING ELBOW SHALL BE SUPPLED BY PIPING.
5. 1/2'' NPT(M) CONNECTION SHALL BE PROVIDED BY PIPING AT PIPING END.
6. SUPPLIED BY INSTRUMENT VENDOR.
BY INST.
SERVICE
PIPE CLASS
MATERIAL
1
B12-24P-LSL-800
LEVEL FOR CRUDE CONDENSATE VESSEL V-800
B1N
SS316L
2
B12-24P-LSL-114
LEVEL FOR CORROSION INHIBITOR STORAGE TANK T-110
A22
HASTALLOY-C
3
B12-24P-LSL-220
LEVEL FOR BIOCIDE STORAGE TANK T-220
A22
HASTALLOY-C
NO. OF INSTALLATION
03
VESSEL
(NOTE-6)
107S
106S
102S
L&T Energy
116S
Hydrocarbon
101S
104S
TRIP PAN
LARSEN & TOUBRO LIMITED
LEVEL SWITCH HIGH (PNEUMATIC)
BILL OF MATERIAL
116S
103S
108S
BY PIPING
102S
1/2''NPT(M)
(NOTE-3)
101S
BY INST.
112S
1/2''NPT(F)
102S
101S
(NOTE-5)
INSTRUMENT
GAS HEADER
LEVEL SWITCH
ITEM
NO.
DESCRIPTION
101S
1/2" OD x WALL THICKNESS 0.065" THK.
102S
MATERIAL QTY. TOTAL
QTY.
SS316/SS316L
15 m
45 m
1/2" OD x 1/2" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316L
3 Nos
9 Nos
103S
1/2" OD x 1/2" NPT(F) FEMALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316L
1 No
3 Nos
104S
1/2" NPTM END CAP
SS316L
1 No
3 Nos
106S
1/2" NPTF GLOBE VALVE SCR`D
SS316L
2 Nos
6 Nos
107S
1/2" NPTM PIPE NIPPLE SMLS CONC SCH XXS,
3" LONG THREAD,
SS316L
1 No
3 Nos
108S
1/2" NPTF BALL VALVE SCR`D
SS316L
1 No
3 Nos
109S
1/4" OD x WALL THICKNESS 0.035" THK.
SS316/SS316L
6m
18 m
110S
1/4" OD x 1/4" NPT(M) MALE TUBING CONN.COMP
TYPE WITH DOUBLE FERRULES
SS316L
3 Nos
111S
110S
SIGNAL TO
SDP
109S
110S
117S
111S
1/4" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS316L
1 No
3 Nos
112S
1/2" OD x 1/4" NPT(M) MALE TUBING CONN.COMP
DOUBLE FERRULES
SS316L
1 No
3 Nos
116S
1/2" OD - TUBING UNION COMPR. TYPE WITH
DOUBLE FERRULES
SS316L
2 NoS
8 Nos
117S
3/4" NPT(M) x 1/2" NPT(M) SWAGE NIPPLE CONC.
THxTH SMLS,SCH.XXS
SS316L
1 No
3 Nos
123S
1/2" NPTM HEXAGONAL PLUG - SCREWED
SS316L
1 No
3 Nos
109S
C2379-PR-B12-24P-PID-3000
TO
C2379-PR-B12-24P-PID-3018
0
B12-24P WELLHEAD PLATFORM P&ID
2.
C2379-IN-B12-24P-MIS-300
C1
INSTRUMENT AND F&G INDEX
3
C2379-IN-GEN-MR-408
D1
DATA SHEET
TAG LIST
123S
S.NO INSTRUMENT TAGS
106S
1
B12-24P-LSH-342
PIPE CLASS
SERVICE
LEVEL FOR CRUDE CONDENSATE VESSEL V-340
NO. OF INSTALLATION
BY PIPING
2'' (NOTE-2)
1.
9 Nos
FILTER REG.
110S
1. FABRICATOR SHALL STRICTLY ADHERE TO THE INSTALLATION REQUIREMENT AND
GENERAL NOTES ON SHEET 3 OF THIS DRAWING.
2. BOLTS, NUTS & GASKETS BY PIPING.
3. LEVEL SWITCH DRAIN/VENT SHALL BE CARRIED TO NEAREST CLOSED DRAIN/
VENT HEADER.
4. PIPING ELBOW SHALL BE SUPPLED BY PIPING.
5. SUPPLIED BY INSTRUMENT VENDOR.
D1N
01
BY INST.
VESSEL
(NOTE-5)
107S
106S
102S
L&T Energy
116S
Hydrocarbon
101S
104S
TRIP PAN
LARSEN & TOUBRO LIMITED