CompTIA Sample Performance
Based Question Answer Key
1
From the network diagram, click on
Workstation 1 to open a command prompt:
5
Click on Workstation 2. In the command prompt
for Workstation 2:
enter “ipconfig” and press enter
enter “ping comptia.org” and press enter
2
In the Workstation 1 command prompt, enter
“ipconfig” and press enter
3
In the Workstation 1 command prompt, enter
“ping comptia.org”and press enter
4
6
7
Close Workstation 2 command prompt
Click on the router to open the interface
8
Click on the Access Control List (ACL) tab
9
Click the “x” to remove the firewall setting
for line 5
Close the Workstation 1 command prompt
© 2020 CompTIA Properties, LLC, used under license by CompTIA Certifications, LLC. All rights reserved. All certification programs and education related to such programs are operated
exclusively by CompTIA Certifications, LLC. CompTIA is a registered trademark of CompTIA Properties, LLC in the U.S. and internationally. Other brands and company names mentioned
herein may be trademarks or service marks of CompTIA Properties, LLC or of their respective owners. Reproduction or dissemination prohibited without written consent of CompTIA
Properties, LLC. Printed in the U.S. 09042-Sep2021