2013 01 Issue
Huawei Antenna
& Antenna Line Products Catalogue
HUAWEI TECHNOLOGIES CO., LTD.
Huawei' Vision
To focus on customers' challenges and needs in MBB Era by providing best
network antenna solutions based on deep insight into network.
Huawei Network Antenna,
Leading to Mobile Broadband Era
Huawei has been dedicated to participate in
mobile communications for over 20 years. and
always absorbed to design and produce Base
Station Antenna with some 300 experts and
engineers in five R&D centers based in China,
Germany, Canada and USA. Huawei has
been awarded more than 100 BTS antenna
patents and has membership in more than
50 standardization organizations. Thanks to
Huawei's experience as well as its industryleading network designs, performance
simulation platforms, and precise 3D spherical
antenna near-field testing system, Huawei is
capable of providing network antennas with
optimal network performance.
Industry-Leading Antenna Solutions
• Antennas for Optimal Network Performance
Huawei is a pioneer in designing antenna for better network performance. All
antennas are analyzed and optimized using network simulation systems. This
makes it possible for Huawei antennas to provide enhanced network performance
(10% better than traditional antennas).
• Supporting Full Range of Frequency Bands and Reducing TCO
Huawei provides more than 100 types of mainstream antennas covering
frequency ranges from 698 MHz to 2690 MHz, with the support from single band
to penta-band. Huawei's antennas lead the industry in terms of width, weight,
wind load and "green upgrade" support to minimize tower modernization costs
and rental fees.
• Easy Maintenance for Reducing OPEX
Huawei's EasyRET solution for antennas eliminates extra sites visit due to incorrect
installation and shortens installation time by 95%. RCUs Integrated
improve reliability while reducing antenna installation and RCU
maintenance costs by 80%. Imbedded RCU software requires
no configuration, and improves service provisioning efficiency by
approximately 95%.
• Flexible MIMO Configurations
Flexible configurations are available for multi-band(700/
800/1800/1900/2100/2300/2600 MHz) for LTE in 2T2R/2T4R/
4T4R/4T8R/8T8R MIMO. One time deployment supports longterm evolution.
• Supporting Evolution to AAS
The integration of Radio Unit within the antenna is the elimination
of several components like cables, connectors, and mounting
hardware and an overall reduction in the physical tower space
required. Huawei can provide an industry-leading active antenna
system (AAS) to handle dynamic capacity requirements, and the
aesthetics of the site can be improved and wind load reduced by
integrating RRU functionality into the antenna.
• High-Performing TMA and Easy O&M
Huawei can provide Dual Tower Mounted Amplifier(DTMA) and
Dualband Tower Mounted Amplifier with less noise figure, lower
insertion loss and PIM, which improves uplink receiver sensitivity
of radio system. Huawei is also the only vendor in the world to
provide remote gain control as well as electrical labeling (essential
to TMA asset management).
Huawei is committed to improving its customers' Wireless
Communications Network capacities over the long-term. We look
forward to cooperating with you in delivering optimal network
performance using our antenna solutions.
Huawei Antenna & Antenna Line Products Catalogue >>
Huawei's SG128 spherical near field testing system - the world's most
advanced antenna testing system:
•• High-performing ultra-broadband dual-polarization probes
•• Five-axis precision turret for military use (can be rotated with 0.01 degree precision)
•• Albatross high-performing shielded room from Germany
•• AEMI radar absorbing materials from the US
•• Precise and stable equipment imported from industry-leading countries
•• Infrared laser for calibration and dedicated installation support
•• Full series of installation poles
•• Industry-leading temperature control technology
Huawei Antenna & Antenna Line Products Catalogue >>
Huawei Antenna Test Standard
Type
Reference
Method
Condition
Duration
Parameters Tested
Low Temperature
Exposure
ETSI 300 019 - 2 - 4
IEC 60068 - 2 - 1
-55℃
16h
Visual/physical exam VSWR
ISO and PIM (pre and post)
High Temperature
Exposure
ETSI 300 019 - 2 - 4
IEC 60068 - 2 - 2
+70℃
16h
Visual/physical exam VSWR
ISO and PIM (pre and post)
Temperature
Cycling
ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 14
-55ºC/+70ºC
5cycles,50h
Visual/physical exam VSWR
ISO and PIM (pre and post)
Humidity
ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 30
+25ºC/+55ºC @ 95% RH
10cycles,240h
Visual/physical exam VSWR
ISO and PIM (pre and post)
Wind Loading
ETSI 300 019 - 2 - 4
IEC 721 - 3 - 4
Simulated constant force of
Visual/physical exam VSWR
3surfaces,144h
200 km/h wind
ISO and PIM (pre and post)
Vibration
ETSI 300 019 - 2 - 4
IEC 60068 - 2 - 6
sinusoidal 6.15mm,10m/
s2,2-9HZ 9HZ-200HZ
3axes×5
sweep cycles
Visual/physical exam VSWR
ISO and PIM (pre and post)
Transportation
Vibration
ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 64
Truck level 3
3 axes,90min
Visual/physical exam VSWR
ISO and PIM (pre and post)
Shocks(without
package)
ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 27
300 m/s2,6ms pulse width
72s
Visual/physical exam VSWR
ISO and PIM (pre and post)
shocks
(with package)
ETSI 300 019 - 2 - 2 IEC 60068 - 2 - 27
300 m/s2,6ms pulse width
72s
Visual/physical exam VSWR
ISO and PIM (pre and post)
Drop
(with package)
ETSI 300 019 - 2 - 2
6surfaces/4Angles/3Edges
13 drops
Visual/physical exam VSWR
ISO and PIM (pre and post)
0.067m3/min,5r/min
2h
Visual/physical exam VSWR
ISO and PIM (pre and post)
ISO 12048
Rain
(in water chamber)
ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 18
Wind Driven Rain
GR - 487 - CORE
MIL - STD - 810
Method 506.3
150mm/h,31m/s,0.5mm4.5mm,45°
Salt Fog
(Continuous)
ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 11
5%NaCl mist @+40ºC
1000h
Visual/physical exam VSWR
ISO and PIM (pre and post)
Salt Fog
(Cyclic)
ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 52
5%NaCl mist
@+15/+40ºC,93% RH
10 cycles,240h
Visual/physical exam VSWR
ISO and PIM (pre and post)
Solar
(UV) Exposure
ETSI 300 019 - 2 - 4
1120W/s2 @+40ºC
24h/
cycle,56days
Visual/physical exam VSWR
ISO and PIM (pre and post)
Dust and sand
ETSI 300 019 - 2 - 4 IEC 60068 - 2 - 68
150um-850um,1g/m3,20m/
s @+70ºC,RH<30%
8h
Visual/physical exam VSWR
ISO and PIM (pre and post)
IEC 60068 - 2 - 5
4surfaces,more Visual/physical exam VSWR
than 120min ISO and PIM (pre and post)
Huawei Antenna & Antenna Line Products Catalogue >>
Antenna Type Naming Rule
Example: D XXX-698-960/1710-2690/1710-2690-65/65/65-17i/17.5i/17.5i-M/M/M-B\R
Figure:
X1
X2
X3
Polarization
Antenna type
Frequency
X4
X5
X6
Half-power
Downtilt
Beamwidth
method
Gain
range
Antenna
Characteristic
D
Directional
O
Omni-directional
C
Cluster
I
Indoor
S
Smart Beam
M
Multi Beam
X
X Polarization
V
Vertical Polarization
H
Horizontal Polarization
C
Circular Polarization
X3
Number
Frequency Bandwidth
X4
Number
Half-power beam Width
X5
Number
Gain(dBi)
Number + Letter
0F: Fixed downtilt
Number
M: Electrical downtilt
C
Combiner Integrated
B
Bias Tee Integrated
T
TMA Integrated
R
RCU Integrated
AS
Azimuth Steering
HE
High Efficiency
ESLS
Enhanced Side lobe Suppression
F
RCU Factory Pre-commissioning
X1
X2
X6
X7
X7
Huawei Antenna & Antenna Line Products Catalogue >>
Figure shows naming rules for models
Figure:
1
23456
TMA Example: ATA261100
89
10 11 12
A
TA2611
00
v01
(Optional) Version
v01/v02 version(or
blank)
Identification
Identify different
characters in ascending
order
Function
TA(TMA short)
+ Frequency +
Protocol(AISG1.1/2.0)
Product type
ALD Products
Antenna Example: ADU451807v01
Combiner Example: ACOMD2H00
A
A
DU4518
07
v01
RCU011
09
00
v01
v01/v02 version(or
blank)
v01/v02 version(or
blank)
Identify different
characters in ascending
order
Identify different
characters in ascending
order
Frequency info+
Polarization + Gain
Combiner+Channel
+Unit Number
+DC bypass properpies
Antenna Products
ALD Products
RCU Example: ARCU01109
A
COMD2H
v01
v01/v02 version(or
blank)
Identify different
characters in ascending
order
RCU + Protocol
(AISG1.1/2.0 )
ALD Products
Notes:
45: single-band 450–470 MHz antennas
79: single-band 790–960 MHz antennas
90: single-band 806–960 MHz antennas
19: single-band 1710–2200 MHz or 1710–2170 MHz antennas
25: single-band 2300–2700 MHz antennas
26: single-band 1710–2690 MHz antennas
DU: dual-band antennas
TR: tri-band antennas
QU: quad-band antennas
PE: penta-band antennas
80: TMAs working at 800 MHz
90: TMAs working at 900 MHz
18: TMAs working at 1800 MHz
21: TMAs working at 2100 MHz
26: TMAs working at 2600 MHz
DU: dual-band TMAs
Huawei Antenna & Antenna Line Products Catalogue >>
Contents
Product Portfolio
A. Huawei Network Antennas
C. Accessories for RET Systems
A - 1. FET Antenna
A - 2. Single Band Antenna
A - 3. Dual-band Antenna
A - 4. Triple-band Antenna
A - 5. Quad-band Antenna
A - 6. Penta-band Antenna
A - 7. TDD Antenna
A - 8. Cluster Antenna
A - 9. Antenna Integrated Bracket
C - 1. Remote Control Unit (RCU)
C - 2. Bias Tee (BT)
C - 3. Smart Bias Tee (SBT)
C - 4. AISG Connecting Cables
C - 5. Portable Control Unit (PCU)
B. Antenna Line Products
B - 1. Tower Mounted Amplifiers
B - 2. Combiners
D. Mounting Instructions
D - 1. MET Installation Guide
D - 2. RET Installation Guide
D - 3. FET Installation Guide
D - 4. Tri-sector Cluster Installation Guide
ts
en
nt
Co
i
Huawei Antenna & Antenna Line Products Catalogue >>
Index
A. Huawei Network Antennas
A - 1. FET Antenna
Dimension (mm)
Model
Page
450-470
v
360
9
0
FET
1 x 7/16 DIN
Female
Φ52 x 3316
A45VP0900
1
450-470
x
65
15
0
FET
2 x 7/16 DIN
Female
2042 x 486 x 98
A45451500
2
806-960
x
65
15
0
FET
2 x 7/16 DIN
Female
1322 x 289 x 85
A90451500
3
806-960
x
65
15
3
FET
2 x 7/16 DIN
Female
1322 x 289 x 85
A90451505
4
806-960
x
65
15
6
FET
2 x 7/16 DIN
Female
1322 x 289 x 85
A90451501
5
806-960
x
65
15.3
0
FET
2 x 7/16 DIN
1312 x 295 x 126
Female
A90451502
6
806-960
x
65
15.3
6
FET
2 x 7/16 DIN
1312 x 295 x 126
Female
A90451503
7
806-960
x
65
17
0
FET
2 x 7/16 DIN
Female
1932 x 289 x 85
A90451700
8
806-960
x
65
17
3
FET
2 x 7/16 DIN
Female
1932 x 289 x 85
A90451705
9
806-960
x
65
18
0
FET
2 x 7/16 DIN
Female
2572 x 289 x 85
A90451800
10
806-960
x
65
18
3
FET
2 x 7/16 DIN
Female
2572 x 289 x 85
A90451805
11
806-960
x
65
18
6
FET
2 x 7/16 DIN
Female
2572 x 289 x 85
A90451801
12
806-960
x
90
17
0
FET
2 x 7/16 DIN
2526 x 268 x 125
Female
A90451600
13
806-960
x
90
17
3
FET
2 x 7/16 DIN
2526 x 268 x 125
Female
A90451706
14
790-960
x
65
17
0
FET
2 x 7/16 DIN
1936 x 260 x 135
Female
A90451702v01
16
790-960
x
65
17
3
FET
2 x 7/16 DIN
1936 x 260 x 135
Female
A90451705v01
18
790-960
x
65
17
6
FET
2 x 7/16 DIN
1936 x 260 x 135
Female
A90451709
20
790-960
x
65
18
0
FET
2 x 7/16 DIN
2535 x 259 x 135
Female
A90451802v01
22
790-960
x
65
18
3
FET
2 x 7/16 DIN
2535 x 259 x 135
Female
A90451805v01
24
1710-2170
x
90
17
0
FET
2 x 7/16 DIN
Female
1306 x 155 x 79
A19451704
26
1710-2170
x
90
17
3
FET
2 x 7/16 DIN
Female
1306 x 155 x 79
A19451705
28
x
Connector
ii
Electrical
Tilt
downtilt (°) Method
de
Gain (dBi)
In
Frequency
3dB Horizontal
Polarization
Range (MHz)
beam width (°)
Huawei Antenna & Antenna Line Products Catalogue >>
Frequency
3dB Horizontal
Polarization
Range (MHz)
beam width (°)
Gain (dBi)
Electrical
Tilt
downtilt (°) Method
Connector
Dimension (mm)
Model
Page
1710-2170
x
65
18
2
FET
2 x 7/16 DIN
Female
1306 x 155 x 79
A19451801
30
1710-2170
x
33
21
0
FET
2 x 7/16 DIN
Female
1318 x 289 x 85
A19452102
31
1710-2170
x
65
21
0
FET
2 x 7/16 DIN
Female
2170 x 155 x 79
A19452100
32
1710-2170
x
65
21
2
FET
2 x 7/16 DIN
Female
2170 x 155 x 79
A19452103
33
1710-2200
x
65
15.5
3
FET
2 x 7/16 DIN
Female
702 x 155 x 89
A19451601
34
1710-2200
x
65
15.5
6
FET
2 x 7/16 DIN
Female
702 x 155 x 89
A19451602
36
1710-2200
x
65
18
0
FET
2 x 7/16 DIN
Female
1311 x 155 x 89
A19451800v01
38
1710-2200
x
65
18
3
FET
2 x 7/16 DIN
Female
1311 x 155 x 89
A19451810v01
40
1710-2200
x
65
18
6
FET
2 x 7/16 DIN
Female
1311 x 155 x 89
A19451802v01
42
Connector
Dimension (mm)
Model
Page
A - 2. Single Band Antenna
Frequency
3dB Horizontal
Polarization
Range (MHz)
beam width (°)
Gain (dBi)
Electrical
Tilt
downtilt (°) Method
806-960
x
90
17
2-9.5
MET
2 x 7/16 DIN
2526 x 268 x 125
Female
A90451704
44
790-960
x
65
15
0-14
MET
2 x 7/16 DIN
1356 x 259 x 135
Female
A79451500v01
45
790-960
x
65
16.5
0-12
MET
2 x 7/16 DIN
1936 x 259 x 135
Female
A79451600v01
46
790-960
x
65
17.5
0-10
MET
2 x 7/16 DIN
2535 x 259 x 135
Female
A79451700v01
48
698-960
x
65
15
0-14
MET
2 x 7/16 DIN
1356 x 259 x 135
Female
**A70451501
50
698-960
x
65
16.5
0-12
MET
2 x 7/16 DIN
1936 x 259 x 135
Female
**A70451600
51
698-960
x
65
17.5
0-10
MET
2 x 7/16 DIN
2535 x 259 x 135
Female
**A70451700
52
698-960
x
90
15
0-12
MET
2 x 7/16 DIN
1936 x 259 x 135
Female
**A70451500
53
1710-2170
x
90
17
2-10
MET
2 x 7/16 DIN
Female
1306 x 155 x 79
A19451703
54
1710-2170
x
33
21
2-10
MET
2 x 7/16 DIN
Female
1318 x 289 x 85
A19452101
55
1710-2200
x
65
15.5
0–12
MET
2 x 7/16 DIN
Female
702 x 155 x 89
A19451505
56
1710-2200
x
65
18
0-10
MET
2 x 7/16 DIN
Female
1311 x 155 x 89
A19451811
58
** Preliminary Issue
x
de
In
iii
Huawei Antenna & Antenna Line Products Catalogue >>
Frequency
3dB Horizontal
Polarization
Range (MHz)
beam width (°)
Gain (dBi)
Electrical
Tilt
downtilt (°) Method
Connector
Dimension (mm)
Model
Page
1710-2200
x
65
18
0-10
EasyRET
2 x 7/16 DIN
Female
1315 x 155 x 89
A194518R0
60
1710-2200
x
65
19.5
0-6
MET
2 x 7/16 DIN
Female
1954 x 155 x 89
A19451902
62
1710-2690
x
65
16
0-14
MET
2 x 7/16 DIN
Female
790 x 155 x 109
**A26451500
64
1710-2690
x
65
18
0-12
MET
2 x 7/16 DIN
1365 x 155 x 109 **A26451800v01
Female
65
1710-2690
x
65
18
0-12
EasyRET
2 x 7/16 DIN
1365 x 155 x 109
Female
67
1710-2690
x
65
19.5
0-8
MET
2 x 7/16 DIN
1690 x 155 x 109 **A26451900v01
Female
69
Model
Page
**A264518R0
** Preliminary Issue
A - 3. Dual-band Antenna
Frequency
3dB Horizontal
Polarization
Range (MHz)
beam width (°)
Gain (dBi)
Electrical
Tilt
downtilt (°) Method
Connector
790-862/
880-960
xx
65/65
14.5/15
0-14/0-14 EasyRET
4 x 7/16 DIN
1536 x 349 x 166
Female
**ADU4515R0
70
790-862/
880-960
xx
65/65
16/16.5
0-12/0-12 EasyRET
4 x 7/16 DIN
1999 x 259 x 135
Female
ADU4516R0
72
790-862/
880-960
xx
65/65
17/17.5
0-10/0-10 EasyRET
4 x 7/16 DIN
2538 x 259 x 135
Female
ADU4517R0
74
790-960/
1710-2180
xx
65/65
15/17.5
0-14/0-10
MET
4 x 7/16 DIN
1360 x 259 x 135
Female
ADU451503
76
790-960/
1710-2180
xx
65/65
16.5/18.5
0-12/0-8
MET
4 x 7/16 DIN
1936 x 259 x 135
Female
ADU451602v01
78
790-960/
1710-2180
xx
65/65
16.5/18.5
0-12/0-8
EasyRET
4 x 7/16 DIN
1936 x 259 x 135
Female
ADU4518R3
80
790-960/
1710-2180
xx
65/65
17.5/18.5
0-10/0-8
MET
4 x 7/16 DIN
2535 x 259 x 135
Female
ADU451807v01
82
790-960/
1710-2180
xx
65/65
17.5/18.5
0-10/0-8
EasyRET
4 x 7/16 DIN
2535 x 259 x 135
Female
ADU4518R0
84
790-960/
1710-2180
x
65/65
15/17.5
0-14/0-10
MET+ 2 x 7/16 DIN
1360 x 259 x 135
Combiner
Female
**ADU4517C0
86
790-960/
1710-2180
x
65/65
16.5/18.5
0-12/0-8
MET+ 2 x 7/16 DIN
1936 x 259 x 135
Combiner
Female
**ADU4518C1
87
790-960/
1710-2180
x
65/65
17.5/18.5
0-10/0-8
MET+ 2 x 7/16 DIN
2535 x 259 x 135
Combiner
Female
ADU4518C0
88
790-960/
1710-2180
xx
65/65
16.5/18.5
0-12/0-8
METESLS
4 x 7/16 DIN
1936 x 259 x 135
Female
ADU451820
90
790-960/
1710-2180
xx
65/65
17.5/18.5
0-10/0-8
METESLS
4 x 7/16 DIN
2535 x 259 x 135
Female
ADU451821
92
790-960/
1710-2690
xx
65/65
15/17.5
0-14/0-10
MET
4 x 7/16 DIN
1450 x 298 x 148
Female
**ADU451716
94
Dimension (mm)
iv
In
de
x
** Preliminary Issue
Huawei Antenna & Antenna Line Products Catalogue >>
Frequency
3dB Horizontal
Polarization
Range (MHz)
beam width (°)
Gain (dBi)
Electrical
Tilt
downtilt (°) Method
Connector
790-960/
1710-2690
xx
65/65
16/18.5
0-10/0-8
MET
790-960/
1710-2690
xx
65/65
17/18.5
0-10/0-8
1710-2200/
1710-2200
xx
65/65
15.5/15.5
1710-2200/
1710-2200
xx
65/65
1710-2200/
1710-2200
xx
1710-2200/
1710-2200
Model
Page
4 x 7/16 DIN
2020 x 298 x 150
Female
ADU451604
95
MET
4 x 7/16 DIN
2598 x 298 x 148
Female
**ADU451712
97
0-12/0-12
MET
4 x 7/16 DIN
Female
701 x 323 x 89
**ADU451611
99
18/18
0-10/0-10
MET
4 x 7/16 DIN
Female
1311 x 323 x 89
ADU451819
100
65/65
18/18
0-10/0-10 EasyRET
4 x 7/16 DIN
Female
1311 x 323 x 89
ADU4518R1
102
xx
65/65
19.5/19.5
0-6/0-6
4 x 7/16 DIN
Female
1954 x 323 x 89
ADU451902
104
1710-2170/
2490-2690
xx
65/65
18/18
0-12/0-12 EasyRET
4 x 7/16 DIN
1445 x 155 x 109
Female
**ADU4518R5
106
1710-2690/
1710-2690
xx
65/65
16/16
0-14/0-14
MET
4 x 7/16 DIN
Female
790 x 299 x 109
**ADU451507
108
1710-2690/
1710-2690
xx
65/65
18/18
0-12/0-12
MET
4 x 7/16 DIN
1365 x 299 x 109
Female
ADU451816v01
109
1710-2690/
1710-2690
xx
65/65
18/18
0-12/0-12 EasyRET
4 x 7/16 DIN
1365 x 323 x 109
Female
**ADU4518R6
111
1710-2690/
1710-2690
xx
65/65
19.5/19.5
0-8/0-8
MET
4 x 7/16 DIN
1690 x 299 x 109 **ADU451901v01 113
Female
2300-2690/
2300-2690
xx
65/65
18/18
0-10/0-10
MET
4 x 7/16 DIN
Female
1060 x 289 x 85
A25451805
114
Frequency
3dB Horizontal
Polarization
Range (MHz)
beam width (°)
Gain (dBi)
Electrical
Tilt
downtilt (°) Method
Connector
Dimension (mm)
Model
Page
790-960/
1710-2180/
1710-2180
xxx
65/65/65
15/15/15
0-14/
0-14/0-14
MET
6 x 7/16 DIN
1454 x 259 x 135
Female
ATR451500
116
790-960/
1710-2180/
1710-2180
xxx
65/65/65
16.5/16.5/16.5
0-12/
0-12/0-12
MET
6 x 7/16 DIN
2098 x 259 x 135
Female
ATR451602v01
118
790-960/
1710-2180/
1710-2180
xxx
65/65/65
16.5/16.5/16.5
0-12/
6 x 7/16 DIN
EasyRET
2098 x 259 x 135
0-12/0-12
Female
ATR4516R0
120
790-960/
1710-2180/
1710-2180
xxx
65/65/65
17.5/17.5/17.5
0-10/
0-10/0-10
MET
6 x 7/16 DIN
2680 x 259 x 135
Female
ATR451704v01
122
790-960/
1710-2180/
1710-2180
xxx
65/65/65
16.5/16.5/16.5
0-12/
0-12/0-12
METESLS
6 x 7/16 DIN
2098 x 259 x 135
Female
ATR451612
124
790-960/
1710-2180/
1710-2180
xxx
65/65/65
17.5/17.5/17.5
0-10/
0-10/0-10
METESLS
6 x 7/16 DIN
2680 x 259 x 135
Female
ATR451713
126
MET
Dimension (mm)
** Preliminary Issue
A - 4. Triple-band Antenna
** Preliminary Issue
x
de
In
v
Huawei Antenna & Antenna Line Products Catalogue >>
Frequency
3dB Horizontal
Polarization
Range (MHz)
beam width (°)
Gain (dBi)
Electrical
Tilt
downtilt (°) Method
Connector
Dimension (mm)
Model
Page
0-10/
6 x 7/16 DIN
EasyRET
2680×259×135
0-10/0-10
Female
ATR4517R0
128
790-960/
1710-2180/
1710-2180
xxx
65/65/65
17.5/17.5/17.5
790-960/
1710-2690/
1710-2690
xxx
65/65/65
16/18/18
0-10/
0-8/0-8
EasyRET
6 x 7/16 DIN
1999 x 349 x 166
Female
**ATR4518R4
130
790-960/
1710-2690/
1710-2690
xxx
65/65/65
17/18/18
0-10/
0-8/0-8
EasyRET
6 x 7/16 DIN
2593 x 349 x 166
Female
**ATR4518R7
132
790-960/
1710-2690/
1710-2690
xxx
65/65/65
15/17.5/17.5
0-14/
0-10/0-10
MET
6 x 7/16 DIN
1472 x 349 x 166
Female
**ATR451709
134
790-960/
1710-2690/
1710-2690
xxx
65/65/65
16/18/18
0-10/
0-8/0-8
MET
6 x 7/16 DIN
1999 x 349 x 166
Female
**ATR451606
135
790-960/
1710-2690/
1710-2690
xxx
65/65/65
17/18/18
0-10/
0-8/0-8
MET
6 x 7/16 DIN
2593 x 349 x 166
Female
**ATR451607
136
698-960/
1710-2690/
1710-2690
xxx
65/65/65
17/17.5/17.5
0-10/
0-8/0-8
2685 x 349 x 148
**ATR4518R9
137
1710-2690/
1710-2170/
2490-2690
xxx
65/65/65
18/18/18
0-10/
6 x 7/16 DIN
EasyRET
1445 x 299 x 109
0-10/0-10
Female
**ATR4518R3
139
1710-2690/
1710-2690/
1710-2690
xxx
65/65/65
18/18/18
0-12/
0-12/0-12
**ATR451714
141
Gain (dBi)
Electrical
Tilt
downtilt (°) Method
Model
Page
EasyRET+ 6 x 7/16 DIN
SBT
Female
MET
6 x 7/16 DIN
1445 x 449 x 115
Female
** Preliminary Issue
A - 5. Quad-band Antenna
Frequency
3dB Horizontal
Polarization
Range (MHz)
beam width (°)
Connector
Dimension (mm)
790-960/
1710-2690/
1710-2170/
2490-2690
xxxx
65/65/65/65
16/18/18/18
0-10/0-8/
8 x 7/16 DIN
EasyRET
1999 x 349 x 166
0-8/0-8
Female
**AQU4518R0
142
790-960/
1710-2690/
1710-2170/
2490-2690
xxxx
65/65/65/65
17/18/18/18
0-10/0-8/
8 x 7/16 DIN
EasyRET
2593 x 349 x 166
0-8/0-8
Female
**AQU4518R1
144
Frequency
3dB Horizontal
Polarization
Range (MHz)
beam width (°)
Gain (dBi)
Electrical
Tilt
downtilt (°) Method
Model
Page
698-960/
1710-2690/
1710-2690/
1710-2690/
1710-2690
17/17.5/
17.5/17/17
0-10/0-10/
10 x 7/16 DIN
0-10/0-10/ EasyRET
2695 x 349 x 166
Female
0-10
**APE4517R2
146
** Preliminary Issue
A - 6. Penta-band Antenna
xxxxx
65/65/
65/65/65
Connector
Dimension (mm)
vi
In
de
x
** Preliminary Issue
Huawei Antenna & Antenna Line Products Catalogue >>
A - 7. TDD Antenna
Frequency
3dB Horizontal
Polarization
Range (MHz)
beam width (°)
Gain (dBi)
Electrical
Tilt
downtilt (°) Method
Connector
Dimension (mm)
Model
Page
1880-2690
x
90
16
0
FET
9 x N Female 1396 x 319 x 116
**ATD451600
148
1880-2690
x
90
16
3
FET
9 x N Female 1396 x 319 x 116
**ATD451601
150
1880-2690
x
90
16
6
FET
9 x N Female 1396 x 319 x 116
**ATD451602
152
1880-2690
x
90
16
9
FET
9 x N Female 1396 x 319 x 116
**ATD451603
154
1880-2690
x
90
16
0
MET+
Combiner
4 x Circular
Multipin
Connnector
1396 x 319 x 116
**ATD4516C0
156
1880-2690
x
90
16
3
MET+
Combiner
4 x Circular
1396 x 319 x 116
Multipin
Connnector
**ATD4516C1
158
1880-2690
x
90
16
6
MET+
Combiner
4 x Circular
Multipin
Connnector
1396 x 319 x 116
**ATD4516C2
160
1880-2690
x
90
16
9
MET+
Combiner
4 x Circular
1396 x 319 x 116
Multipin
Connnector
**ATD4516C3
162
2300-2700
x
60
18
2-10
MET
2 x N Female
1060 x 155 x 79
A25451804
164
2300-2700/
2300-2700
xx
65/65
18/18
2-10
MET
4 x N Female 1060 x 289 x 85
A25451803
165
** Preliminary Issue
A - 8. Cluster Antenna
Frequency
3dB Horizontal
Polarization
Range (MHz)
beam width (°)
1710-2690
x
65
Gain (dBi)
18
Electrical
Tilt
downtilt (°) Method
2-12
MET
Connector
Dimension (mm)
Model
Page
3 x 2 x 7/16
DIN Female
1793 x Φ230 &
Φ250
A264518S0
166
Page
A - 9. Antenna Integrated Bracket
Bracket type
Antenna Width
Reqired
Weight (Kg)
Dimension (mm)
Model
TSC-S (3 Sector
Clamp-Small)
<280mm
5.8
88.9mm (3.5inch)
ASMC00001
TSC-M (3 Sector
Clamp-Medium)
<380mm
6.3
114.3mm (4.5inch)
ASMC00002
TSC-L (3 Sector
Clamp-Large)
<400mm
6.6
139.7mm (5.5inch)
ASMC00003
**AISG Color Coding Standard
168
170
x
de
In
i
vi
Huawei Antenna & Antenna Line Products Catalogue >>
B. Antenna Line Products
B - 1. Tower Mounted Amplifiers
Description
Frequency Range (MHz)
AISG type
RX : 832 - 862
AISG v1.1
TX : 791 - 821
AISG v2.0
RX : 880 - 905
AISG v1.1
TX : 925 - 950
AISG v2.0
RX : 880 - 915
AISG v1.1
TX : 925 - 960
AISG v2.0
RX : 890 - 915
AISG v1.1
TX : 935 - 960
AISG v2.0
RX : 1710 - 1785
AISG v1.1
DD800MHz
EGSM 900MHz SUBBAND
EGSM 900MHz
PGSM 900MHz
1800MHz
Gain (dB)
8 - 16
190 x 240 x 120
(0.5 dB Step)
8 - 16
198 x 308 x 70.5
(0.5 dB Step)
8 - 16
248 x 324 x 75.5
(0.5 dB Step)
8 - 16
198 x 308 x 70.5
(0.5 dB Step)
AISG v2.0
RX : 1920 - 1980
AISG v1.1
2100MHz
AISG v2.0
RX : 2500 - 2570
AISG v1.1
2600MHz
AISG v2.0
TX : 925 - 960
172
ATA802000
ATA901102
175
ATA902002
ATA901101
178
ATA902001
ATA901103
181
ATA902003
184
160 x 220 x 100
187
160 x 205 x 54.5
ATA212001
ATA261100
190
160 x 210 x 54.5
AISG v2.0
RX : 880 - 915
900MHz Bypass 1800MHz
ATA801100
ATA211101
12
TX : 2620 - 2690
Page
ATA182001
12
TX : 2110 - 2170
Model
ATA181101
12
TX : 1805 - 1880
Dimension (mm)
ATA262000
8-16
248 x 324 x 100
(0.5 dB Step)
**ATA902004
193
RX : 1920 - 1980
2100MHz Bypass 900MHz
AISG v2.0
12
228 x 205 x 54.5
**ATA212004
196
AISG v2.0
12
175 x 245 x 100
**ATA212002
199
AISG v2.0
12
224 x 312 x 95
**ATA212003
202
TX : 2110 - 2170
RX : 1920 - 1980
2100MHz Bypass 1800MHz
TX : 2110 - 2170
RX : 1920 - 1980
2100MHz Bypass 900/1800MHz
TX : 2110 - 2170
vi
ii
In
de
x
** Preliminary Issue
Huawei Antenna & Antenna Line Products Catalogue >>
Description
Dullband DCS1800&UMTS2100
(2input2output)
Frequency Range (MHz)
AISG type
Gain (dB)
Dimension (mm)
Model
Page
AISG v2.0
12
196 x 280 x 110
**ATADU2002
205
AISG v2.0
12
196 x 280 x 110
**ATADU2003
208
AISG v2.0
12
247 x 342 x 132
**ATADU2001
211
AISG v2.0
12
247 x 342 x 132
**ATADU2005
214
Model
Page
RX : 1710 - 1785/1920 - 1980
TX : 1805 - 1880/2110 - 2170
Dullband DCS1800&UMTS2100
(2input4output)
RX : 1710 - 1785/1920 - 1980
TX : 1805 - 1880/2110 - 2170
Dullband DD800&EGSM900
(2input2output)
RX : 832 - 862/880 - 905
TX : 791 - 821/925 - 950
Dullband DD800&EGSM900
(2input4output)
RX : 832 - 862/880 - 905
TX : 791 - 821/925 - 950
** Preliminary Issue
B - 2. Combiners
Catagery
Pass Band (MHz)
Band 1 : 790 - 862
Dual-band
Combiner
Max. Input
power (W)
200
Band 2 : 880 - 960
200
Band 1 : 790 - 862
200
Band 2 : 880 - 960
200
Band 1 : 790 - 862
200
Band 2 : 880 - 960
200
Band 1 : 790 - 862
200
Band 2 : 880 - 960
200
Band 1 : 790 - 862
300
Band 2 : 880 - 2200
300
Band 1 : 698 - 960
300
Band 2 : 1710 - 2200
** Preliminary Issue
300
DC-Bypass
Intermodulation
Dimension (mm)
(dBm)
880 - 960MHz
DC-bypass
< -110
Double Unit:
180 x 210 x 107
ACOMD2H09
217
880 - 960MHz
DC-bypass
< -117
Double Unit:
180 x 210 x 107
ACOMD2H04
220
All DC-bypass
< -110
Double Unit:
180 x 210 x 107
**ACOMD2H18
223
All DC-bypass
< -117
Double Unit:
180 x 210 x 107
**ACOMD2H15
226
All DC-bypass
< -117
Double Unit:
220 x 210 x 115
**ACOMD2H14
229
1710 - 2200MHz
DC-bypass
< -110
Double Unit:
130 x 190 x 105
ACOMD2H11
232
x
de
In
ix
Huawei Antenna & Antenna Line Products Catalogue >>
Catagery
Pass Band (MHz)
Band 1 : 698 - 960
Dual-band
Combiner
Max. Input
power (W)
300
Band 2 : 1710 - 2200
300
Band 1 : 698 - 960
300
Band 2 : 1710 - 2200
300
Band 1 : 698 - 960
300
Band 2 : 2490 - 2700
300
Band 1 : 698 - 960
300
Band 2 : 2490 - 2700
300
Band 1 : 698 - 960
300
Band 2 : 2490 - 2700
300
Band 1 : 698 - 960
300
Band 2 : 1710 - 2700
300
Band 1 : 790 - 1880
300
Band 2 : 1920 - 2200
300
Band 1 : 790 - 1880
300
Band 2 : 1920 - 2200
300
Band 1 : 1710 - 1880
300
Band 2 : 1920 - 2200
300
Band 1 : 1710 - 1880
300
DC-Bypass
Intermodulation
Dimension (mm)
(dBm)
Model
Page
1710 - 2200MHz
DC-bypass
< -117
Double Unit:
130 x 190 x 105
ACOMD2H10
235
All DC-bypass
< -110
Double Unit:
130 x 190 x 105
**ACOMD2H19
238
2490 - 2700MHz
DC-bypass
< -110
Double Unit:
130 x 190 x 105
ACOMD2H13
241
2490 - 2700MHz
DC-bypass
< -117
Double Unit:
130 x 190 x 105
ACOMD2H12
244
All DC-bypass
< -110
Double Unit:
130 x 190 x 105
**ACOMD2H20
247
1710 - 2700MHz
DC-bypass
< -117
Double Unit:
130 x 190 x 105
ACOMD2H00
250
1920 - 2200MHz
DC-bypass
< -110
Double Unit:
190 x 154 x 105
**ACOMD2H02
253
All DC-bypass
< -110
Double Unit:
190 x 154 x 105
**ACOMD2H21
256
1920 - 2200MHz
DC-bypass
< -110
Double Unit:
160 x 154 x 103
ACOMD2H06
259
Band 2 : 1920 - 2200
300
Band 1 : 1710 - 1880
300
Band 2 : 1920 - 2200
300
Band 1 : 1710 - 1880
300
All DC-bypass
< -110
Double Unit:
160 x 154 x 103
ACOMD2H08
1920 - 2200MHz
DC-bypass
< -117
Double Unit:
160 x 154 x 103
ACOMD2H05
262
All DC-bypass
Band 2 : 1920 - 2200
300
< -117
Double Unit:
160 x 154 x 103
ACOMD2H07
x
In
de
x
** Preliminary Issue
Huawei Antenna & Antenna Line Products Catalogue >>
Catagery
Pass Band (MHz)
Band 1 : 1710 - 2200
Dual-band
Combiner
Max. Input
power (W)
300
Band 2 : 2490 - 2700
300
Band 1 : 1710 - 2200
300
Band 2 : 2490 - 2700
300
Band 1 : 1710 - 2200
300
Band 2 : 2490 - 2700
300
Band 1 : 2500 - 2540/2620 - 2660
250
Band 2 : 2575 - 2595
250
Band 1 : 2614 - 2624
60
Band 2 : 2582 - 2602
60
Band 1 : 790 - 960
300
Band 2 : 880 - 960
300
Band 3 : 1710 - 2200
300
Band 1 : 790 - 960
300
Band 2 : 1710 - 1880
300
Band 3 : 1920 - 2200
300
Band 1 : 790 - 960
300
Band 2 : 1710 - 1880
300
Band 3 : 1920 - 2200
300
Band 1 : 790 - 960
300
Band 2 : 1710 - 1880
300
Band 3 : 1920 - 2200
300
Band 1 : 790 - 960
300
Band 2 : 1710 - 1880
300
Band 3 : 1920 - 2200
300
DC-Bypass
Intermodulation
Dimension (mm)
(dBm)
Model
Page
1710 - 2200MHz
DC-bypass
< -110
Double Unit:
160 x 154 x 103
ACOMD2L04
265
1710 - 2200MHz
DC-bypass
< -117
Double Unit:
126 x 102 x 103
ACOMD2L03
268
All DC-bypass
< -110
Double Unit:
126 x 102 x 103
**ACOMD2H16
271
2500 - 2540/
2620 - 2660MHz
DC-bypass
< -110
Double Unit:
250 x 176 x 103
**ACOMD2L05
274
All DC-Stop
< -97
Double Unit:
361 x 158 x 120
ACOMD2H25
277
All DC-bypass
< -117
Double Unit:
220 x 210 x 115
ACOMT2H04
280
1920 - 2200MHz
DC-bypass
< -117
Double Unit:
190 x 154 x 105
ACOMT2H00
283
Tri-band
Combiner
1710 - 1880/
1920 - 2200MHz
DC-bypass
< -117
Double Unit:
190 x 154 x 105
ACOMT2H02
1920 - 2200MHz
DC-bypass
< -110
Double Unit:
190 x 154 x 105
ACOMT2H01
286
** Preliminary Issue
1710 - 1880/
1920 - 2200MHz
DC-bypass
< -110
Double Unit:
190 x 154 x 105
ACOMT2H03
x
de
In
xi
Huawei Antenna & Antenna Line Products Catalogue >>
Catagery
Tri-band
Combiner
Quadband
Combiner
Pass Band (MHz)
Max. Input
power (W)
Band 1 : 790 - 960
300
Band 2 : 1710 - 1880
300
Band 3 : 1920 - 2200
300
Band 1 : 790 - 1880
300
Band 2 : 1920 - 2200
300
Band 3 : 2490 - 2700
300
Band 1 : 698 - 960
300
Band 2 : 1710 - 2200
300
Band 3 : 2490 - 2700
300
Band 1 : 790 - 960
300
Band 2 : 1710 -1880
300
Band 3 : 1920 - 2200
300
Band 4 : 2490 - 2700
300
Band 1 : 790 - 960
300
Band 2 : 1710 -1880
300
Band 3 : 1920 - 2200
300
Band 4 : 2490 - 2700
300
DC-Bypass
Intermodulation
Dimension (mm)
(dBm)
Model
Page
ALL DC-bypass
< -110
Double Unit:
190 x 154 x 105
**ACOMT2H08
289
1920 - 2200MHz
DC-bypass
< -110
Double Unit:
215 x 200 x 105
**ACOMT2M00
292
All DC-bypass
< -110
Double Unit:
215 x 200 x 105
**ACOMT2M09
295
1920 - 2200MHz
DC-bypass
< -110
Double Unit:
215 x 200 x 105
**ACOMQ2M00
298
All DC-bypass
< -110
Double Unit:
215 x 200 x 105
**ACOMQ2H00
301
DC-Stop
< -117
Unit:
39 x 151 x 45
**ADCSTOP00
304
** Preliminary Issue
DC-STOP
Band: 698 - 2700
500
xi
i
In
de
x
** Preliminary Issue
Huawei Antenna & Antenna Line Products Catalogue >>
C. Accessories for RET Systems
C - 1. Remote Control Unit (RCU)
307
Antenna and RCU configuration list
Input voltage
range (V)
AISG type
Adjustment time (full
range) (min)
Calibration time
(min)
Dimension (mm)
<2
<4
200 x 56 x 47
AISG v1.1
ARCU01104
DC 10 - 30
AISG v2.0
AISG v1.1
DC 10 - 30
AISG v2.0
Model
ARCU02001
ARCU01109
< 1.5
<3
(typically, depending (typically, depending
on antenna type)
on antenna type)
180 x 65 x 54
ARCU02004
Page
308
309
C - 2. Bias Tee (BT)
Frequency Range
(MHz)
AISG type
Insertion loss (dB)
Dimension (mm)
Model
Page
690 - 2700
AISG v1.1
AISG v2.0
≤ 0.1 (690 - 960 MHz / 1710 - 2690 MHz)
≤ 0.15 (960 - 1710 MHz)
48.5 x 151 x 45
ABT000001
310
Model
Page
C - 3. Smart Bias Tee (SBT)
Frequency Range
(MHz)
AISG type
Insertion loss (dB)
Dimension (mm)
690 - 2700
AISG v1.1
AISG v2.0
≤ 0.1 (690 - 960 MHz / 1710 - 2690 MHz)
≤ 0.15 (960 - 1710 MHz)
75 x 160 x 45
ASBT00001(ANT Side)
ASBT00002 (BTS Side)
313
C - 4. AISG Connecting Cables
AISG Connecting Cables For Remote Electrical Tilt (RET) System
316
AISG Connecting Cables For RRU RET_Port
317
C - 5. Portable Control Unit (PCU)
Frequency Range
(MHz)
AISG type
Insertion loss (dB)
Dimension (mm)
Model
Page
DC 12-15V 1.5A
AISG v1.1
AISG v2.0
Interface to RCU:RS485 / Power supply
Interface to PC: USB 2.0
168 x 90 x 44
APCU00001
318
x
de
In
ii
xi
Huawei Antenna & Antenna Line Products Catalogue >>
D. Mounting Instructions
D - 1. MET Installation Guide
MET Antenna with H-Brackets Installation Guide (A)
321
MET Antenna with L-Brackets Installation Guide
323
MET Antenna with H-Brackets Installation Guide (B)
325
D - 2. RET Installation Guide
RET Antenna with L-Brackets Installation Guide
327
RET Antenna with H-Brackets Installation Guide
330
D - 3. FET Installation Guide
FET Antenna with H-Brackets Installation Guide
333
FET Antenna with L-Brackets Installation Guide
335
D - 4. Tri-sector Cluster Installation Guide
de
x
337
xi
v
In
Tri-sector Cluster Antenna Installation Guide
Huawei Antenna & Antenna Line Products Catalogue >>
A
Huawei Network
Antennas
OV-450-470-360-9i-0F
Model: A45VP0900
Electrical Properties
Frequency range (MHz)
450 - 470
Polarization
Vertical
VSWR
≤1.4
Gain (dBi)
9.0
Horizontal 3dB beam width (°)
360
Vertical 3dB beam width (°)
11
Antenna pattern roundness (dB)
±1
Electrical downtilt(°)
0
Intermodulation IM3 (dBc)
≤-150
Max. CW input power (W)
150
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Dimensions (mm)
Φ52 x 3316
Net weight (kg)
5.0
Bracket weight (kg)
2.0
Mast diameter (mm)
50 - 85
Radome material
Fiberglass
Operating temperature (℃)
-55 - +65
Max. wind velocity (km/h)
200
1 x 7/16 DIN Female
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
1
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
460 - 470 MHz
-4
O 70M
V
455 - 465 MHz
0
450 - 460 MHz
45
Connector
DX-450-470-65-15i-0F
Model: A45451500
Electrical Properties
Frequency range (MHz)
450 - 470
Polarization
+45° , -45°
VSWR
≤1.5
Gain (dBi)
15
Horizontal 3dB beam width (°)
65
Vertical 3dB beam width (°)
16
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
≥ 25
Cross polar ratio (dB)
≥ 15
Electrical downtilt (°)
0
Intermodulation IM5 (dBc)
≤-160 (2 x 43 dBm carrier)
Max. CW input power (W)
500
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Dimensions (H x W x D) (mm)
2042 x 486 x 98
Net weight (kg)
28.3
Bracket weight (kg)
6.5
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Operating temperature (℃)
-55 - +65
Frontal: 740 (v=150 km/h)
Lateral: 220 (v=150 km/h)
Rear side: 1100 (v=150 km/h)
Wind load (N)
Max. wind velocity (km/h)
Connector
455 - 465 MHz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
0
45
Issue: 2012-10-26
+45°
-45°
7/16 (F)
7/16 (F)
200
2 x 7/16 DIN Female
450 - 460 MHz
450 - 470
X
460 - 470 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
M
70
-4 X
D
Hz
2
DX-806-960-65-15i-0F
Model: A90451500
Electrical Properties
Frequency range (MHz)
Polarization
806 - 866
824 - 894
+45° , -45°
VSWR
880 - 960
≤1.4
Gain (dBi)
Side lobe suppression for first side lobe
above horizon (dB)
14.6
14.8
15.0
Typ. 17
Typ. 17
Typ. 17
Horizontal 3dB beam width (°)
67
65
62
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
15.5
14.6
14.0
≥30
≥25
≥15
0
≤-150 (2 x 43 dBm carrier)
500
50
DC Ground
Mechanical Properties
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
7/16 (F)
7/16 (F)
880 - 960 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
824 - 894 MHz
-45°
3
806 - 866 MHz
+45°
-9
DX 60M
Max. wind velocity (km/h)
Connector
806 - 960
X
6
Wind load (N)
1322 x 289 x 85
9.5
4.6
0 - 16
50 - 115
Fiberglass
-55 .. +65
Frontal: 290 (v=150 km/h)
Lateral: 120 (v=150 km/h)
Rear side: 425 (v=150 km/h)
200
2 x 7/16 DIN Female
80
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
DX-806-960-65-15i-3F
Model: A90451505
Electrical Properties
Frequency range (MHz)
Polarization
806 - 866
824 - 894
+45° , -45°
VSWR
880 - 960
≤1.5
Gain (dBi)
Side lobe suppression for first side lobe
above horizon (dB)
14.7
15.0
15.3
Typ. 17
Typ. 17
Typ. 17
Horizontal 3dB beam width (°)
67
65
62
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
15.5
14.6
14.0
≥28
≥25
≥15
3
≤-150 (2 x 43 dBm carrier)
500
50
DC Ground
Mechanical Properties
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
Wind load (N)
Max. wind velocity (km/h)
Connector
806 - 866 MHz
1322 x 289 x 85
9.5
4.6
0 - 16
50 - 115
Fiberglass
-55 .. +65
Frontal: 290 (v=150 km/h)
Lateral: 120 (v=150 km/h)
Rear side: 425 (v=150 km/h)
200
2 x 7/16 DIN Female
824 - 894 MHz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
6
80
Issue: 2012-10-26
806 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
880 - 960 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
M
60
-9 X
D
Hz
4
DX-806-960-65-15i-6F
Model: A90451501
Electrical Properties
Frequency range (MHz)
Polarization
806 - 866
824 - 894
+45° , -45°
VSWR
880 - 960
≤1.4
Gain (dBi)
Side lobe suppression for first side lobe
above horizon (dB)
14.5
14.7
14.9
Typ. 17
Typ. 17
Typ. 17
Horizontal 3dB beam width (°)
67
65
62
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
15.5
14.9
14.0
≥30
≥25
≥15
6
≤-150 (2 x 43 dBm carrier)
500
50
DC Ground
Mechanical Properties
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
7/16 (F)
7/16 (F)
880 - 960 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
824 - 894 MHz
-45°
5
806 - 866 MHz
+45°
-9
DX 60M
Max. wind velocity (km/h)
Connector
806 - 960
X
6
Wind load (N)
1322 x 289 x 85
9.5
4.6
0 - 16
50 - 115
Fiberglass
-55 .. +65
Frontal: 290 (v=150 km/h)
Lateral: 120 (v=150 km/h)
Rear side: 425 (v=150 km/h)
200
2 x 7/16 DIN Female
80
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
DX-806-960-65-15.3i-0F
Model: A90451502
Electrical Properties
Frequency range (MHz)
Polarization
806 - 866
824 - 894
+45° , -45°
880 - 960
VSWR
≤1.4
≤1.4
≤1.3
Gain (dBi)
Side lobe suppression for first side lobe
above horizon (dB)
14.8
15.0
15.3
≥19
≥19
≥19
Horizontal 3dB beam width (°)
68
66
64
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
15.9
Cross polar ratio (dB)
0°
±60°
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
15.4
14.3
≥30
≥30
≥20
≥10
0
≤-150 (2 x 43 dBm carrier)
500
50
DC Ground
Mechanical Properties
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
Wind load (N)
Max. wind velocity (km/h)
Connector
806 - 866 MHz
1312 x 295 x 126
10.5
4.6
0 - 16
50 - 115
Fiberglass
-55 .. +65
Frontal: 290 (v=150 km/h)
Lateral: 180 (v=150 km/h)
Rear side: 430 (v=150 km/h)
200
2 x 7/16 DIN Female
824 - 894 MHz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
6
80
Issue: 2012-10-26
806 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
880 - 960 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
M
60
-9 X
D
Hz
6
DX-806-960-65-15.3i-6F
Model: A90451503
Electrical Properties
Frequency range (MHz)
Polarization
806 - 866
824 - 894
+45° , -45°
880 - 960
VSWR
≤1.35
≤1.35
≤1.3
Gain (dBi)
Side lobe suppression for first side lobe
above horizon (dB)
14.7
14.9
15.2
≥19
≥19
≥19
Horizontal 3dB beam width (°)
68
66
64
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
15.9
Cross polar ratio (dB)
0°
±60°
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
15.4
14.3
≥30
≥30
≥20
≥10
6
≤-150 (2 x 43 dBm carrier)
500
50
DC Ground
Mechanical Properties
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
7/16 (F)
7/16 (F)
880 - 960 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
824 - 894 MHz
-45°
7
806 - 866 MHz
+45°
-9
DX 60M
Max. wind velocity (km/h)
Connector
806 - 960
X
6
Wind load (N)
1312 x 295 x 126
10.5
4.6
0 - 16
50 - 115
Fiberglass
-55 .. +65
Frontal: 290 (v=150 km/h)
Lateral: 180 (v=150 km/h)
Rear side: 430 (v=150 km/h)
200
2 x 7/16 DIN Female
80
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
DX-806-960-65-17i-0F
Model: A90451700
Electrical Properties
Frequency range (MHz)
Polarization
806 - 866
824 - 894
+45° , -45°
VSWR
880 - 960
≤1.37
Gain (dBi)
Side lobe suppression for first side lobe
above horizon (dB)
16.6
16.8
17.0
Typ. 17
Typ. 17
Typ. 17
Horizontal 3dB beam width (°)
67
64
63
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
11.0
10.5
10.0
≥28
≥25
≥15
0
≤-150 (2 x 43 dBm carrier)
500
50
DC Ground
Mechanical Properties
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
Wind load (N)
Max. wind velocity (km/h)
Connector
806 - 866 MHz
1932 x 289 x 85
13.5
4.6
0 - 12
50 - 115
Fiberglass
-55 .. +65
Frontal: 420 (v=150 km/h)
Lateral: 175 (v=150 km/h)
Rear side: 620 (v=150 km/h)
200
2 x 7/16 DIN Female
824 - 894 MHz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
6
80
Issue: 2012-10-26
806 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
880 - 960 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
M
60
-9 X
D
Hz
8
DX-806-960-65-17i-3F
Model: A90451705
Electrical Properties
Frequency range (MHz)
Polarization
806 - 866
824 - 894
+45° , -45°
VSWR
880 - 960
≤1.5
Gain (dBi)
Side lobe suppression for first side lobe
above horizon (dB)
16.7
17.0
17.2
Typ. 17
Typ. 17
Typ. 17
Horizontal 3dB beam width (°)
67
64
63
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
11.0
10.5
10.0
≥28
≥25
≥15
3
≤-150 (2 x 43 dBm carrier)
500
50
DC Ground
Mechanical Properties
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
7/16 (F)
7/16 (F)
880 - 960 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
824 - 894 MHz
-45°
9
806 - 866 MHz
+45°
-9
DX 60M
Max. wind velocity (km/h)
Connector
806 - 960
X
6
Wind load (N)
1932 x 289 x 85
13.5
4.6
0 - 12
50 - 115
Fiberglass
-55 .. +65
Frontal: 420 (v=150 km/h)
Lateral: 175 (v=150 km/h)
Rear side: 620 (v=150 km/h)
200
2 x 7/16 DIN Female
80
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
DX-806-960-65-18i-0F
Model: A90451800
Electrical Properties
Frequency range (MHz)
Polarization
806 - 866
824 - 894
+45° , -45°
VSWR
880 - 960
≤1.45
Gain (dBi)
Side lobe suppression for first side lobe
above horizon (dB)
17.4
17.6
17.8
Typ. 17
Typ. 17
Typ. 17
Horizontal 3dB beam width (°)
67
64
63
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
8.2
7.5
7.0
≥28
≥25
≥15
0
≤-150 (2 x 43 dBm carrier)
500
50
DC Ground
Mechanical Properties
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
Wind load (N)
Max. wind velocity (km/h)
Connector
806 - 866 MHz
2572 x 289 x 85
16.5
4.6
0-8
50 - 115
Fiberglass
-55 .. +65
Frontal: 560 (v=150 km/h)
Lateral: 235 (v=150 km/h)
Rear side: 830 (v=150 km/h)
200
2 x 7/16 DIN Female
824 - 894 MHz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
6
80
Issue: 2012-10-26
806 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
880 - 960 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
M
60
-9 X
D
Hz
10
DX-806-960-65-18i-3F
Model: A90451805
Electrical Properties
Frequency range (MHz)
Polarization
806 - 866
824 - 894
+45° , -45°
VSWR
880 - 960
≤ 1.45
Gain (dBi)
Side lobe suppression for first side lobe
above horizon (dB)
17.8
18.0
18.2
Typ. 17
Typ. 17
Typ. 17
Horizontal 3dB beam width (°)
67
64
63
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
8.2
7.5
7.0
≥ 28
≥25
≥15
3
≤ -150 (2 x 43 dBm carrier)
500
50
DC Ground
Mechanical Properties
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
7/16 (F)
7/16 (F)
880 - 960 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
824 - 894 MHz
-45°
11
806 - 866 MHz
+45°
-9
DX 60M
Max. wind velocity (km/h)
Connector
806 - 960
X
6
Wind load (N)
2572 x 289 x 85
16.5
4.6
0-8
50 - 115
Fiberglass
-55 .. +65
Frontal: 560 (v=150 km/h)
Lateral: 235 (v=150 km/h)
Rear side: 830 (v=150 km/h)
200
2 x 7/16 DIN Female
80
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
DX-806-960-65-18i-6F
Model: A90451801
Electrical Properties
Frequency range (MHz)
Polarization
806 - 866
824 - 894
+45° , -45°
VSWR
880 - 960
≤1.37
Gain (dBi)
Side lobe suppression for first side lobe
above horizon (dB)
17.3
17.6
17.8
Typ. 17
Typ. 17
Typ. 17
Horizontal 3dB beam width (°)
67
64
63
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
8.0
7.3
6.8
≥30
≥25
≥15
6
≤-150 (2 x 43 dBm carrier)
500
50
DC Ground
Mechanical Properties
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
Wind load (N)
Max. wind velocity (km/h)
Connector
806 - 866 MHz
2572 x 289 x 85
16.5
4.6
0-8
50 - 115
Fiberglass
-55 .. +65
Frontal: 560 (v=150 km/h)
Lateral: 235 (v=150 km/h)
Rear side: 830 (v=150 km/h)
200
2 x 7/16 DIN Female
824 - 894 MHz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
6
80
Issue: 2012-10-26
806 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
880 - 960 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
M
60
-9 X
D
12
DX-806-960-90-17i-0F
Model: A90451600
Electrical Properties
Frequency range (MHz)
Polarization
806 - 866
824 - 894
+45° , -45°
VSWR
880 - 960
≤ 1.4
Gain (dBi)
Side lobe suppression for first side lobe
above horizon (dB)
16.5
16.8
17.0
≥18
≥18
≥18
Horizontal 3dB beam width (°)
88
86
84
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
8.1
Cross polar ratio (dB)
0°
±60°
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
7.9
7.2
≥30
≥25
≥15
≥10
0
≤-150 (2 x 43 dBm carrier)
500
50
DC Ground
Mechanical Properties
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
7/16 (F)
7/16 (F)
880 - 960 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
824 - 894 MHz
-45°
13
806 - 866 MHz
+45°
-9
DX 60M
Max. wind velocity (km/h)
Connector
806 - 960
X
6
Wind load (N)
2526 x 268 x 125
16.1
4.6
0-8
50 - 115
Fiberglass
-55 .. +65
Frontal: 510 (v=150 km/h)
Lateral: 340 (v=150 km/h)
Rear side: 750 (v=150 km/h)
200
2 x 7/16 DIN Female
80
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
DX-806-960-90-17i-3F
Model: A90451706
Electrical Properties
806 - 960
Frequency range (MHz)
806 - 866
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
3, Fixed
Gain (dBi)
16.4
16.7
16.9
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
19
19
19
Horizontal 3dB beam width (°)
88
86
84
Vertical 3dB beam width (°)
7.9
7.6
7.1
VSWR
< 1.4
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
≥ 25
0°
Typ. 20
±60°
≥ 10
Cross polar ratio (dB)
Max. power per input (W)
500
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 1.0
Tracking (dB)
Avg. 0.6 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2526 x 268 x 125
Antenna net weight (kg)
17.4
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 510 (at 150 km/h)
Lateral: 340 (at 150 km/h)
Rear side: 750 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
2 x 7/16 DIN Female
Bottom
6
80
Hz
M
60
-9 X
D
14
DX-806-960-90-17i-3F
Model: A90451706
120
Unit: mm
806 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
806 - 960 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
www.huawei.com
15
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-9
DX 60M
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
6
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
80
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-790-960-65-17i-0F
Model: A90451702v01
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0, Fixed
Gain (dBi)
16.5
16.7
17.1
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
20
20
20
Horizontal 3dB beam width (°)
67
65
63
Vertical 3dB beam width (°)
9.8
9.4
8.9
VSWR
< 1.4
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 32
0°
Typ. 25
±60°
≥ 10
Cross polar ratio (dB)
Max. power per input (W)
500
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 0.6
Tracking (dB)
Avg. 0.6 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1936 x 260 x 135
Antenna net weight (kg)
12.9
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 665 (at 150 km/h)
Lateral: 345 (at 150 km/h)
Rear side: 880 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
2 x 7/16 DIN Female
Bottom
0
79
M
60
-9 X
D
Hz
16
DX-790-960-65-17i-0F
Model: A90451702v01
Unit: mm
70
790 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
790 - 960 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
www.huawei.com
17
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-9
DX 60M
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
0
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-790-960-65-17i-3F
Model: A90451705v01
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
3, Fixed
Gain (dBi)
16.5
16.7
17.1
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
19
19
19
Horizontal 3dB beam width (°)
67
65
63
Vertical 3dB beam width (°)
9.8
9.4
8.9
VSWR
< 1.4
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 32
0°
Typ. 25
±60°
≥ 10
Cross polar ratio (dB)
Max. power per input (W)
500
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 0.6
Tracking (dB)
Avg. 0.6 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1936 x 260 x 135
Antenna net weight (kg)
12.9
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 665 (at 150 km/h)
Lateral: 345 (at 150 km/h)
Rear side: 880 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
2 x 7/16 DIN Female
Bottom
0
79
M
60
-9 X
D
Hz
18
DX-790-960-65-17i-3F
Model: A90451705v01
Unit: mm
70
790 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
790 - 960 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
www.huawei.com
19
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-9
DX 60M
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
0
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-790-960-65-17i-6F
Model: A90451709
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
6, Fixed
Gain (dBi)
16.5
16.7
17.1
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
19
19
18
Horizontal 3dB beam width (°)
67
65
63
Vertical 3dB beam width (°)
9.8
9.4
8.9
VSWR
< 1.4
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 30
0°
Typ. 25
±60°
≥ 10
Cross polar ratio (dB)
Max. power per input (W)
500
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Max. power per input (W)
Avg. 0.6
Intermodulation IM3 (dBc)
Avg. 0.8 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1936 x 260 x 135
Antenna net weight (kg)
12.9
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 665 (at 150 km/h)
Lateral: 345 (at 150 km/h)
Rear side: 880 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
2 x 7/16 DIN Female
Bottom
0
79
Hz
M
60
-9 X
D
20
DX-790-960-65-17i-6F
Model: A90451709
Unit: mm
70
790 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
790 - 960 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
www.huawei.com
21
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-9
DX 60M
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
0
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-790-960-65-18i-0F
Model: A90451802v01
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0, Fixed
Gain (dBi)
17.5
17.7
18.0
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
21
21
21
Horizontal 3dB beam width (°)
67
65
63
Vertical 3dB beam width (°)
7.8
7.5
7.1
VSWR
< 1.4
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 32
0°
Typ. 25
±60°
≥ 10
Cross polar ratio (dB)
Max. power per input (W)
500
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 0.5
Tracking (dB)
Avg. 0.5 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2535 x 259 x 135
Antenna net weight (kg)
16.3
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 910 (at 150 km/h)
Lateral: 470 (at 150 km/h)
Rear side: 1200 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
2 x 7/16 DIN Female
Bottom
0
79
Hz
M
60
-9 X
D
22
DX-790-960-65-18i-0F
Model: A90451802v01
Unit: mm
70
790 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
790 - 960 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
www.huawei.com
23
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-9
DX 60M
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
0
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-790-960-65-18i-3F
Model: A90451805v01
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
3, Fixed
Gain (dBi)
17.5
17.7
18.0
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
20
20
20
Horizontal 3dB beam width (°)
67
65
63
Vertical 3dB beam width (°)
7.8
7.5
7.1
VSWR
< 1.4
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 32
0°
Typ. 25
±60°
≥ 10
Cross polar ratio (dB)
Max. power per input (W)
500
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 0.5
Tracking (dB)
Avg. 0.5 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2535 x 259 x 135
Antenna net weight (kg)
16.3
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 910 (at 150 km/h)
Lateral: 470 (at 150 km/h)
Rear side: 1200 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
2 x 7/16 DIN Female
Bottom
0
79
M
60
-9 X
D
Hz
24
DX-790-960-65-18i-3F
Model: A90451805v01
Unit: mm
70
790 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
790 - 960 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
www.huawei.com
25
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-9
DX 60M
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
0
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-1710-2170-90-17i-0F
Model: A19451704
Electrical Properties
1710 - 2170
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
+45° , -45°
Electrical downtilt (°)
0, Fixed
Gain (dBi)
16.5
16.7
17.1
Side lobe suppression for first side
lobe above horizon (dB)
18
20
20
Horizontal 3dB beam width (°)
86
85
84
Vertical 3dB beam width (°)
7.0
6.7
6.4
VSWR
< 1.4
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
≥ 25
0°
Typ. 20
±60°
≥ 10
Cross polar ratio (dB)
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.0
Tracking (dB)
Avg. 0.8 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1306 x 155 x 79
Antenna net weight (kg)
5.4
Bracket weight (kg)
3.0
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 290 (at 150 km/h)
Lateral: 115 (at 150 km/h)
Rear side: 335 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
10
17
Connector position
2 x 7/16 DIN Female
Bottom
Hz
0M
17
-2 X
D
26
DX-1710-2170-90-17i-0F
Model: A19451704
80
Unit: mm
1710 - 2170
X
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2170 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
M
www.huawei.com
27
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-2
DX 170
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
10
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-1710-2170-90-17i-3F
Model: A19451705
Electrical Properties
1710 - 2170
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
+45° , -45°
Electrical downtilt (°)
3, Fixed
Gain (dBi)
16.5
16.7
17.0
Side lobe suppression for first side
lobe above horizon (dB)
18
20
20
Horizontal 3dB beam width (°)
86
85
84
Vertical 3dB beam width (°)
7.0
6.7
6.4
VSWR
< 1.4
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
≥ 25
0°
Typ. 20
±60°
≥ 10
Cross polar ratio (dB)
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2
Tracking (dB)
Avg. 0.8 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1306 x 155 x 79
Antenna net weight (kg)
5.4
Bracket weight (kg)
3.0
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 290 (at 150 km/h)
Lateral: 115 (at 150 km/h)
Rear side: 335 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
10
17
Connector position
2 x 7/16 DIN Female
Bottom
Hz
0M
17
-2 X
D
28
DX-1710-2170-90-17i-3F
Model: A19451705
80
Unit: mm
1710 - 2170
X
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2170 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
M
www.huawei.com
29
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-2
DX 170
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
10
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-1710-2170-65-18i-2F
Model: A19451801
Electrical Properties
Frequency range (MHz)
Polarization
1710 - 1880
1850 - 1990
+45° , -45°
VSWR
1920 - 2170
≤ 1.4
Gain (dBi)
Side lobe suppression for first side
lobe above horizon (dB)
17.6
17.8
18.0
Typ. 20
Typ. 20
Typ. 20
Horizontal 3dB beam width (°)
68
65
62
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
0°
Cross polar ratio (dB)
±60°
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
7.3
6.8
6.2
≥ 30
Typ. 30
Typ. 21
Typ. 10
2
≤-150 (2 x 43 dBm carrier)
200
50
DC Ground
Mechanical Properties
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
Wind load (N)
Max. wind velocity (km/h)
Connector
1710 - 1880 MHz
1306 x 155 x 79
5.5
3.0
0 - 16
50 - 115
Fiberglass
-55 .. +65
Frontal: 150 (v=150 km/h)
Lateral: 110 (v=150 km/h)
Rear side: 225 (v=150 km/h)
200
2 x 7/16 DIN Female
1850 - 1990 MHz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
10
17
Issue: 2012-10-26
1710 - 2170
X
+45°
-45°
7/16 (F)
7/16 (F)
1920 - 2170 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
0M
17
-2 X
D
30
DX-1710-2170-33-21i-0F
Model: A19452102
Electrical Properties
Frequency range (MHz)
Polarization
1710 - 1880
1850 - 1990
+45° , -45°
VSWR
1920 - 2170
≤1.45
Gain (dBi)
Side lobe suppression for first side
lobe above horizon (dB)
20.3
20.7
20.9
18
18
18
Horizontal 3dB beam width (°)
35
33
31
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
7.2
6.6
6.2
≥30
Typ. 28
Typ. 20
0
≤-150 (2 x 43 dBm carrier)
300
50
DC Ground
Mechanical Properties
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
7/16 (F)
1920 - 2170 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
7/16 (F)
M
1850 - 1990 MHz
-45°
31
1710 - 1880 MHz
+45°
-2
DX 170
Max. wind velocity (km/h)
Connector
1710 - 2170
X
10
Wind load (N)
1318 x 289 x 85
10.4
4.6
0-8
50 - 115
Fiberglass
-55 .. +65
Frontal: 285 (v=150 km/h)
Lateral: 120 (v=150 km/h)
Rear side: 425 (v=150 km/h)
200
2 x 7/16 DIN Female
17
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
DX-1710-2170-65-21i-0F
Model: A19452100
Electrical Properties
Frequency range (MHz)
Polarization
1710 - 1880
1850 - 1990
+45° , -45°
VSWR
1920 - 2170
≤ 1.45
Gain (dBi)
Side lobe suppression for first side
lobe above horizon (dB)
20.0
20.5
20.8
18
18
18
Horizontal 3dB beam width (°)
66
63
60
Vertical 3dB beam width (°)
First null_fill below main beam (dB)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
0°
Cross polar ratio (dB)
±60°
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
4.2
3.7
3.3
20
≥ 30
≥ 30
≥ 17
≥ 10
0
≤-150 (2 x 43 dBm carrier)
300
50
DC Ground
Mechanical Properties
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
Wind load (N)
Max. wind velocity (km/h)
Connector
1710 - 1880 MHz
2170 x 155 x 79
9.1
3
0-8
50 - 115
Fiberglass
-55 .. +65
Frontal:250 (v=150 km/h)
Lateral: 185 (v=150 km/h)
Rear side: 375 (v=150 km/h)
200
2 x 7/16 DIN Female
1850 - 1990 MHz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
10
17
Issue: 2012-10-26
1710 - 2170
X
+45°
-45°
7/16 (F)
7/16 (F)
1920 - 2170 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
0M
17
-2 X
D
32
DX-1710-2170-65-21i-2F
Model: A19452103
Electrical Properties
Frequency range (MHz)
Polarization
1710 - 1880
1850 - 1990
+45° , -45°
VSWR
1920 - 2170
≤1.45
Gain (dBi)
Side lobe suppression for first side
lobe above horizon (dB)
20.0
20.5
20.8
16
16
16
Horizontal 3dB beam width (°)
66
63
60
Vertical 3dB beam width (°)
First null_fill below main beam (dB)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
0°
Cross polar ratio (dB)
±60°
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
4.5
4.0
3.6
20
≥ 30
≥ 30
≥ 17
≥ 10
0
≤-150 (2 x 43 dBm carrier)
300
50
DC Ground
Mechanical Properties
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
7/16 (F)
1920 - 2170 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
7/16 (F)
M
1850 - 1990 MHz
-45°
33
1710 - 1880 MHz
+45°
-2
DX 170
Max. wind velocity (km/h)
Connector
1710 - 2170
X
10
Wind load (N)
2170 x 155 x 79
9.1
3
0-8
50 - 115
Fiberglass
-55 .. +65
Frontal:250 (v=150 km/h)
Lateral: 185 (v=150 km/h)
Rear side: 375 (v=150 km/h)
200
2 x 7/16 DIN Female
17
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
DX-1710-2200-65-15.5i-3F
Model: A19451601
Electrical Properties
1710 - 2200
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
+45° , -45°
Electrical downtilt (°)
3, Fixed
1920 - 2170
2170 - 2200
Gain (dBi)
15.3
15.7
16.2
16.0
Side lobe suppression for first side
lobe above horizon (dB)
18
20
20
20
Horizontal 3dB beam width (°)
67
64
61
60
Vertical 3dB beam width (°)
13.3
12.5
11.8
11.3
VSWR
< 1.4
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 30
0°
Typ. 22
±60°
Typ. 10
Cross polar ratio (dB)
Max. power per input (W)
300 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 1.5
Tracking (dB)
Avg. 1.7 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
702 x 155 x 89
Antenna net weight (kg)
3.6
Bracket weight (kg)
2.6
Mechanical downtilt (°)
0 - 20
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 150 (at 150 km/h)
Lateral: 75 (at 150 km/h)
Rear side: 175 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
10
17
Connector position
2 x 7/16 DIN Female
Bottom
Hz
0M
20
-2 X
D
34
DX-1710-2200-65-15.5i-3F
Model: A19451601
Unit: mm
91
1710 - 2200
X
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2200 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
M
www.huawei.com
35
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-2
DX 200
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
10
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-1710-2200-65-15.5i-6F
Model: A19451602
Electrical Properties
1710 - 2200
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
+45° , -45°
Electrical downtilt (°)
6, Fixed
1920 - 2170
2170 - 2200
Gain (dBi)
15.2
15.6
16.1
16.0
Side lobe suppression for first side
lobe above horizon (dB)
18
20
20
20
Horizontal 3dB beam width (°)
67
64
61
60
Vertical 3dB beam width (°)
13.3
12.5
11.8
11.3
VSWR
< 1.4
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 30
0°
Typ. 22
±60°
Typ. 10
Cross polar ratio (dB)
Max. power per input (W)
300 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 1.8
Tracking (dB)
Avg. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
702 x 155 x 89
Antenna net weight (kg)
3.6
Bracket weight (kg)
2.6
Mechanical downtilt (°)
0 - 20
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 150 (at 150 km/h)
Lateral: 75 (at 150 km/h)
Rear side: 175 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
10
17
Connector position
2 x 7/16 DIN Female
Bottom
Hz
0M
20
-2 X
D
36
DX-1710-2200-65-15.5i-6F
Model: A19451602
Unit: mm
91
1710 - 2200
X
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2200 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
M
www.huawei.com
37
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-2
DX 200
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
10
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-1710-2200-65-18i-0F
Model: A19451800v01
Electrical Properties
1710 - 2200
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
+45° , -45°
Electrical downtilt (°)
0, Fixed
1920 - 2170
2170 - 2200
Gain (dBi)
17.6
18.0
18.3
18.3
Side lobe suppression for first side
lobe above horizon (dB)
18
19
19
19
Horizontal 3dB beam width (°)
67
64
62
60
Vertical 3dB beam width (°)
7.0
6.7
6.4
6.0
VSWR
< 1.4
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 30
0°
Typ. 22
±60°
Typ. 10
Cross polar ratio (dB)
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Max. power per input (W)
Avg. 1.2
Intermodulation IM3 (dBc)
Avg. 1.2 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1311 x 155 x 89
Antenna net weight (kg)
5.5
Bracket weight (kg)
2.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 315 (at 150 km/h)
Lateral: 155 (at 150 km/h)
Rear side: 360 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
10
17
Connector position
2 x 7/16 DIN Female
Bottom
Hz
0M
20
-2 X
D
38
DX-1710-2200-65-18i-0F
Model: A19451800v01
Unit: mm
91
1710 - 2200
X
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2200 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
M
www.huawei.com
39
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-2
DX 200
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
10
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-1710-2200-65-18i-3F
Model: A19451810v01
Electrical Properties
1710 - 2200
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
+45° , -45°
Electrical downtilt (°)
3, Fixed
1920 - 2170
2170 - 2200
Gain (dBi)
17.7
18.1
18.4
18.2
Side lobe suppression for first side
lobe above horizon (dB)
19
19
19
19
Horizontal 3dB beam width (°)
67
64
62
60
Vertical 3dB beam width (°)
7.0
6.7
6.4
6.0
VSWR
< 1.4
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 30
0°
Typ. 22
±60°
Typ. 10
Cross polar ratio (dB)
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Max. power per input (W)
Avg. 1.2
Intermodulation IM3 (dBc)
Avg. 1.5 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1311 x 155 x 89
Antenna net weight (kg)
5.5
Bracket weight (kg)
2.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 315 (at 150 km/h)
Lateral: 155 (at 150 km/h)
Rear side: 360 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
10
17
Connector position
2 x 7/16 DIN Female
Bottom
Hz
0M
20
-2 X
D
40
DX-1710-2200-65-18i-3F
Model: A19451810v01
Unit: mm
91
1710 - 2200
X
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2200 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
M
www.huawei.com
41
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-2
DX 200
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
10
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-1710-2200-65-18i-6F
Model: A19451802v01
Electrical Properties
1710 - 2200
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
+45° , -45°
Electrical downtilt (°)
6, Fixed
1920 - 2170
2170 - 2200
Gain (dBi)
17.7
18.1
18.4
18.2
Side lobe suppression for first side
lobe above horizon (dB)
18
20
20
20
Horizontal 3dB beam width (°)
67
64
62
60
Vertical 3dB beam width (°)
7.0
6.7
6.4
6.0
VSWR
< 1.4
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 30
0°
Typ. 22
±60°
Typ. 10
Cross polar ratio (dB)
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Max. power per input (W)
Avg. 1.5
Intermodulation IM3 (dBc)
Avg. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1311 x 155 x 89
Antenna net weight (kg)
5.5
Bracket weight (kg)
2.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 315 (at 150 km/h)
Lateral: 155 (at 150 km/h)
Rear side: 360 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
10
17
Connector position
2 x 7/16 DIN Female
Bottom
Hz
0M
20
-2 X
D
42
DX-1710-2200-65-18i-6F
Model: A19451802v01
Unit: mm
91
1710 - 2200
X
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2200 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
M
www.huawei.com
43
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-2
DX 200
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
10
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-806-960-90-17i-M
Model: A90451704
Electrical Properties
Frequency range (MHz)
Polarization
VSWR
(°)
(dBi)
(°)
(dBi)
Gain
Side lobe suppression for first
side lobe above horizon
806 - 866
824 - 894
+45° , -45°
880 - 960
≤ 1.45
≤ 1.4
≤ 1.4
2 6 9.5 2 6 9.5 2 6 9.5
16.1 16.2 16.0 16.3 16.4 16.2 16.4 16.5 16.3
2 6 9.5 2 6 9.5 2 6 9.5
18 18 18 18 18 18 18 18 18
Horizontal 3dB beam width (°)
88
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
8.2
Cross polar ratio (dB)
0°
±60°
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
86
85
7.6
7.4
≥30
≥25
≥20
Typ. 13
2 - 9.5
≤-150 (2 x 43 dBm carrier)
500
50
DC Ground
Mechanical Properties
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
Wind load (N)
Max. wind velocity (km/h)
Connector
806 - 866 MHz
2526 x 268 x 125
18.6
4.6
0-8
50 - 115
Fiberglass
-55 .. +65
Frontal: 510 (v=150 km/h)
Lateral: 340 (v=150 km/h)
Rear side: 750 (v=150 km/h)
200
2 x 7/16 DIN Female
824 - 894 MHz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
6
80
Issue: 2012-10-26
806 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
880 - 960 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
M
60
-9 X
D
44
DX-790-960-65-15i-M
Model: A79451500v01
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
Electrical downtilt (°)
0 - 14 , continuously adjustable
Gain (dBi)
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
0°
7°
14°
0°
7°
14°
0°
7°
14°
14.6
14.5
14.2
14.9
14.8
14.6
15.1
14.8
14.7
0°
7°
14°
0°
7°
14°
0°
7°
14°
18
17
16
18
17
16
18
17
16
Horizontal 3dB beam width (°)
67
Vertical 3dB beam width (°)
15.2
VSWR
65
63
14.5
13.6
< 1.4
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 28
Cross polar ratio (dB)
880 - 960
+45° , -45°
0°
Typ. 25
≥ 10
±60°
Max. power per input (W)
500 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
≤3
Tracking (dB)
Avg. 1 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
1356 x 259 x 135
Antenna net weight (kg)
11.2
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 440 (at 150 km/h)
Lateral: 230 (at 150 km/h)
Rear side: 585 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
Bottom
45
Connector position
2 x 7/16 DIN Female
-9
DX 60M
Connector
0
Wind load (N)
79
Antenna dimensions (H x W x D) (mm)
DX-790-960-65-16.5i-M
Model: A79451600v01
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable
Gain (dBi)
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
0°
6°
12°
0°
6°
12°
0°
6°
12°
16.2
16.3
16.0
16.3
16.5
16.3
16.6
16.8
16.4
0°
6°
12°
0°
6°
12°
0°
6°
12°
20
20
16
20
18
16
20
17
16
Horizontal 3dB beam width (°)
67
65
63
Vertical 3dB beam width (°)
10.5
10.1
9.5
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 28
0°
Typ. 25
±60°
≥ 10
Cross polar ratio (dB)
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 1.5
Tracking (dB)
Avg. 1 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1936 x 259 x 135
Antenna net weight (kg)
14.2
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 665 (at 150 km/h)
Lateral: 345 (at 150 km/h)
Rear side: 880 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
2 x 7/16 DIN Female
Bottom
0
79
Hz
M
60
-9 X
D
46
DX-790-960-65-16.5i-M
Model: A79451600v01
56
Unit: mm
70
790 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
790 - 960 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
www.huawei.com
47
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-9
DX 60M
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
0
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-790-960-65-17.5i-M
Model: A79451700v01
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
824 - 894
Polarization
880 - 960
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
Gain (dBi)
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
0°
5°
10°
0°
5°
10°
0°
5°
10°
17.0
17.1
16.7
17.1
17.3
17.0
17.3
17.6
17.1
0°
5°
10°
0°
5°
10°
0°
5°
10°
20
18
18
20
20
18
20
18
18
Horizontal 3dB beam width (°)
66
66
64
Vertical 3dB beam width (°)
8.3
7.9
7.3
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 30
0°
Typ. 25
±60°
≥ 10
Cross polar ratio (dB)
Max. power per input (W)
500 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 1
Tracking (dB)
Avg. 1 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2535 x 259 x 135
Antenna net weight (kg)
17.5
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 910 (at 150 km/h)
Lateral: 470 (at 150 km/h)
Rear side: 1200 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
2 x 7/16 DIN Female
Bottom
0
79
Hz
M
60
-9 X
D
48
DX-790-960-65-17.5i-M
Model: A79451700v01
56
Unit: mm
70
790 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
790 - 960 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
www.huawei.com
49
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-9
DX 60M
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
0
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-698-960-65-15i-M
Model: A70451501
Preliminary Issue
Electrical Properties
698 - 960
Frequency range (MHz)
698 - 806
790 - 862
Polarization
824 - 894
Electrical downtilt (°)
0 - 14 , continuously adjustable
Gain (dBi)
0°
7°
14°
0°
7°
14°
0°
7°
14°
0°
7°
14°
14.0
14.1
14.0
14.4
14.4
14.3
14.9
14.7
14.4
15.1
14.9
14.5
0°
7°
14°
0°
7°
14°
0°
7°
14°
0°
7°
14°
17
16
15
17
16
15
17
16
15
17
16
15
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
Horizontal 3dB beam width (°)
68
67
Vertical 3dB beam width (°)
17.2
16.0
VSWR
65
63
15.3
14.5
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
> 25
0°
Typ. 20
Cross polar ratio (dB)
880 - 960
+45° , -45°
Typ. 10
±60°
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Typ. 2.0
Tracking (dB)
Typ. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
Antenna net weight (kg)
1356 x 259 x 135
11.2
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
Wind load (N)
-55 .. +65
Frontal: 440 (at 150 km/h)
Lateral: 230 (at 150 km/h)
Rear side: 585 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
8
69
Issue: 2013-01-08
2 x 7/16 DIN Female
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
M
60
-9 X
D
50
DX-698-960-65-16.5i-M
Model: A70451600
Preliminary Issue
Electrical Properties
698 - 960
Frequency range (MHz)
698 - 806
790 - 862
Polarization
824 - 894
Electrical downtilt (°)
0 - 12 , continuously adjustable
Gain (dBi)
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
15.5
15.6
15.3
16.0
16.1
15.8
16.3
16.4
16.0
16.4
16.6
16.1
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
17
16
15
17
16
15
17
16
15
17
16
15
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
Horizontal 3dB beam width (°)
68
67
Vertical 3dB beam width (°)
11.5
10.5
VSWR
65
63
10.1
9.5
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 27
0°
Typ. 20
Cross polar ratio (dB)
880 - 960
+45° , -45°
Typ. 10
±60°
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Typ. 2.0
Tracking (dB)
Typ. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
1936 x 259 x 135
14.5
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector position
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
2 x 7/16 DIN Female
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
Connector
51
Wind load (N)
-55 .. +65
Frontal: 665 (at 150 km/h)
Lateral: 345 (at 150 km/h)
Rear side: 880 (at 150 km/h)
-9
DX 60M
Operational temperature (℃)
8
Antenna net weight (kg)
69
Antenna dimensions (H x W x D) (mm)
DX-698-960-65-17.5i-M
Model: A70451700
Preliminary Issue
Electrical Properties
698 - 960
Frequency range (MHz)
698 - 806
790 - 862
Polarization
824 - 894
Electrical downtilt (°)
0 - 10 , continuously adjustable
Gain (dBi)
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
16.3
16.4
16.0
16.8
16.9
16.5
17.1
17.2
16.8
17.1
17.4
16.9
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
17
16
15
17
16
15
17
16
15
17
16
15
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
Horizontal 3dB beam width (°)
68
67
Vertical 3dB beam width (°)
9.0
8.3
VSWR
65
63
7.9
7.3
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 28
0°
Typ. 20
Cross polar ratio (dB)
880 - 960
+45° , -45°
Typ. 10
±60°
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Typ. 2.0
Tracking (dB)
Typ. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
Antenna net weight (kg)
2535 x 259 x 135
17.5
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
Wind load (N)
-55 .. +65
Frontal: 910 (at 150 km/h)
Lateral: 470 (at 150 km/h)
Rear side: 1200 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
8
69
Issue: 2013-01-08
2 x 7/16 DIN Female
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
M
60
-9 X
D
52
DX-698-960-90-15i-M
Model: A70451500
Preliminary Issue
Electrical Properties
698 - 960
Frequency range (MHz)
698 - 806
790 - 862
Polarization
824 - 894
Electrical downtilt (°)
0 - 12 , continuously adjustable
Gain (dBi)
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
14.4
14.5
14.0
14.9
15.0
14.5
15.0
15.1
14.5
14.9
15.2
14.6
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
17
16
15
17
16
15
17
16
15
17
16
15
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
Horizontal 3dB beam width (°)
87
86
Vertical 3dB beam width (°)
11.5
10.5
VSWR
85
84
10.1
9.5
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 26
0°
Typ. 17
Cross polar ratio (dB)
880 - 960
+45° , -45°
Typ. 10
±60°
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.0
Tracking (dB)
Avg. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
1936 x 259 x 135
12.5
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector position
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
2 x 7/16 DIN Female
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
Connector
53
Wind load (N)
-55 .. +65
Frontal: 665 (at 150 km/h)
Lateral: 345 (at 150 km/h)
Rear side: 880 (at 150 km/h)
-9
DX 60M
Operational temperature (℃)
8
Antenna net weight (kg)
69
Antenna dimensions (H x W x D) (mm)
DX-1710-2170-90-17i-M
Model: A19451703
Electrical Properties
Frequency range (MHz)
Polarization
1710 - 1880
1850 - 1990
+45° , -45°
VSWR
1920 - 2170
≤ 1.4
(°)
(dBi)
(°)
(dBi)
Gain
Side lobe suppression for
first side lobe above horizon
2
6 10 2
6 10 2
6 10
16.3 16.5 16.2 16.5 16.7 16.4 16.7 17.0 16.5
2
6 10 2
6 10 2
6 10
18 17 16 18 17 16 18 17 16
Horizontal 3dB beam width (°)
84
88
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
0°
Cross polar ratio (dB)
±60°
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
7.5
86
6.5
6.0
≥30
≥ 25
≥18
≥10
2 - 10
≤-150 (2 x 43 dBm carrier)
300
50
DC Ground
Mechanical Properties
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
1306 x 155 x 79
6.5
3.0
Mechanical downtilt (°)
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
Wind load (N)
Max. wind velocity (km/h)
Connector
1710 - 1880 MHz
0 - 16
50 - 115
Fiberglass
-55 .. +65
Frontal: 150 (v=150 km/h)
Lateral: 110 (v=150 km/h)
Rear side: 225 (v=150 km/h)
200
2 x 7/16 DIN Female
1850 - 1990 MHz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
10
17
Issue: 2012-10-26
1710 - 2170
X
+45°
-45°
7/16 (F)
7/16 (F)
1920 - 2170 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
0M
17
-2 X
D
54
DX-1710-2170-33-21i-M
Model: A19452101
Electrical Properties
Frequency range (MHz)
Polarization
1710 - 1880
1850 - 1990
+45° , -45°
VSWR
1920 - 2170
≤ 1.45
(°)
(dBi)
(°)
(dBi)
Gain
Side lobe suppression for
first side lobe above horizon
2
6 10 2
6 10 2
6 10
20.0 20.1 20.1 20.3 20.5 20.1 20.7 20.5 19.8
2
6 10 2
6 10 2
6 10
18 17 16 18 17 16 18 17 16
Horizontal 3dB beam width (°)
35
33
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Electrical downtilt (°)
Intermodulation IM3 (dBc)
Max. CW input power (W)
Impedance (Ω)
Grounding
7.2
31
6.6
6.2
≥30
Typ. 28
Typ. 20
0 - 10
≤-150 (2 x 43 dBm carrier)
300
50
DC Ground
Mechanical Properties
1318 x 289 x 85
11.4
4.6
1850 - 1990 MHz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
-45°
7/16 (F)
7/16 (F)
1920 - 2170 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
1710 - 1880 MHz
+45°
M
Max. wind velocity (km/h)
Connector
1710 - 2170
X
55
Wind load (N)
50 - 115
Fiberglass
-55 .. +65
Frontal: 285 (v=150 km/h)
Lateral: 120 (v=150 km/h)
Rear side: 425 (v=150 km/h)
200
2 x 7/16 DIN Female
-2
DX 170
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
0-8
10
Mechanical downtilt (°)
17
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
DX-1710-2200-65-15.5i-M
Model: A19451505
Electrical Properties
1710 - 2200
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable
Gain (dBi)
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
15.4
15.4
15.1
15.6
15.5
15.1
15.8
15.7
15.4
15.8
15.7
15.3
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
20
17
15
20
18
15
20
18
17
16
15
15
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
Horizontal 3dB beam width (°)
67
64
61
60
Vertical 3dB beam width (°)
13.9
13.0
12.6
11.5
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 29
0°
Typ. 22
±60°
Typ. 10
Cross polar ratio (dB)
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 1.5
Tracking (dB)
Avg. 1.5 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
702 x 155 x 89
Antenna net weight (kg)
4.3
Bracket weight (kg)
2.6
Mechanical downtilt (°)
0 - 20
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 150 (at 150 km/h)
Lateral: 75 (at 150 km/h)
Rear side: 175 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
10
17
Connector position
2 x 7/16 DIN Female
Bottom
Hz
0M
20
-2 X
D
56
DX-1710-2200-65-15.5i-M
Model: A19451505
34
46
34
Unit: mm
1710 - 2200
X
+45°
7/16 (F)
-45°
7/16 (F)
1710 - 2200 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
M
www.huawei.com
57
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-2
DX 200
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
10
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-1710-2200-65-18i-M
Model: A19451811
Electrical Properties
1710 - 2200
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
Gain (dBi)
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
17.2
17.6
17.4
17.7
18.0
17.7
18.0
18.1
17.9
18.0
18.2
17.9
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
20
16
18
20
20
18
18
17
16
18
18
16
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
Horizontal 3dB beam width (°)
67
64
61
60
Vertical 3dB beam width (°)
7.5
7.0
6.7
6.2
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 30
0°
Typ. 22
±60°
≥ 10
Cross polar ratio (dB)
Max. power per input (W)
500 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 1.2
Tracking (dB)
Avg. 1.2 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1311 x 155 x 89
Antenna net weight (kg)
6.2
Bracket weight (kg)
2.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 315 (at 150 km/h)
Lateral: 155 (at 150 km/h)
Rear side: 360 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
10
17
Connector position
2 x 7/16 DIN Female
Bottom
Hz
0M
20
-2 X
D
58
DX-1710-2200-65-18i-M
Model: A19451811
34
46
34
Unit: mm
1710 - 2200
X
+45°
7/16 (F)
-45°
7/16 (F)
1710 - 2200 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
M
www.huawei.com
59
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-2
DX 200
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
10
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-1710-2200-65-18i-M-R
Model: A194518R0
Electrical Properties
1710 - 2200
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable
Gain (dBi)
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
17.2
17.4
17.1
17.5
17.8
17.4
17.8
18.1
17.6
17.4
17.6
17.5
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
18
15
16
18
17
16
18
17
16
18
17
16
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
Horizontal 3dB beam width (°)
67
64
61
60
Vertical 3dB beam width (°)
7.5
7.0
6.7
6.2
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 30
0°
Typ. 20
±60°
Typ. 10
Cross polar ratio (dB)
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Typ. 3
Tracking (dB)
Typ. 3 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1315 x 155 x 89
Antenna net weight (kg)
7
Bracket weight (kg)
2.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Max. operational wind speed (km/h)
Survival wind speed (km/h)
Connector
Connector position
RET Type
Frontal: 150 (at 150 km/h)
Lateral: 110 (at 150 km/h)
Rear side: 225 (at 150 km/h)
150
200
2 x 7/16 DIN Female
Bottom
Internal motor
AISG 1.1 / AISG 2.0
RET Connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
10
17
RET Protocols
Hz
0M
20
-2 X
D
60
DX-1710-2200-65-18i-M-R
Model: A194518R0
RET Properties
RET Type
Internal motor
RET Protocols
AISG 1.1 / AISG 2.0
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 10 (motor activated)
< 0.5 (stand by)
Adjustment time (full range) (min)
< 1.5 (typically, depending on antenna type)
Calibration time (min)
< 3 (typically, depending on antenna type)
RET Connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
DC
n/c
RS-485B
n/c
y EN 60950-1 (Safety)
6
7
8
RS-485A DC in/out DC return
n/c
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
Standards:
5
Certification:
CE, FCC, RoHS, WEEE
y EN 55022 (Emission)
y EN 55024 (Immunity)
y ETSI EN300386 (1.4.1)
y FCC part15
HINT
Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical
support personnel of Huawei.
Hz
M
www.huawei.com
61
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-2
DX 200
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
10
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-1710-2200-65-19.5i-M
Model: A19451902
Electrical Properties
1710 - 2200
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 6, continuously adjustable
Gain (dBi)
0°
3°
6°
0°
3°
6°
0°
3°
6°
0°
3°
6°
18.6
18.7
18.5
19.0
19.1
18.9
19.2
19.4
19.1
19.4
19.5
18.8
0°
3°
6°
0°
3°
6°
0°
3°
6°
0°
3°
6°
20
17
16
20
17
16
20
18
17
20
18
17
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
Horizontal 3dB beam width (°)
67
64
62
60
Vertical 3dB beam width (°)
5.0
4.7
4.5
4.1
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 32
0°
Typ. 25
±60°
Typ. 10
Cross polar ratio (dB)
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 1.5
Tracking (dB)
Avg. 1.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1954 x 155 x 89
Antenna net weight (kg)
8.4
Bracket weight (kg)
2.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 505 (at 150 km/h)
Lateral: 250 (at 150 km/h)
Rear side: 575 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
10
17
Connector position
2 x 7/16 DIN Female
Bottom
Hz
0M
20
-2 X
D
62
DX-1710-2200-65-19.5i-M
Model: A19451902
34
Unit: mm
46
34
1710 - 2200
X
+45°
7/16 (F)
-45°
7/16 (F)
1710 - 2200 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
M
www.huawei.com
63
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-2
DX 200
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
10
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX-1710-2690-65-16i-M
Model: A26451500
Preliminary Issue
Electrical Properties
1710 - 2690
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable
Gain (dBi)
0°
7°
14°
0°
7°
14°
0°
7°
14°
0°
7°
14°
14.8
15.0
14.5
15.3
15.5
15.0
15.8
16.0
15.5
15.8
16.0
15.5
0°
7°
14°
0°
7°
14°
0°
7°
14°
0°
7°
14°
17
16
15
17
16
15
17
16
15
17
16
15
16
15
15
16
15
15
16
16
15
16
15
15
Side lobe suppression (Typ.) (dB)
-for first side lobe above main beam
-within 0° - 15° sector above horizon
Horizontal 3dB beam width (°)
67
65
63
60
Vertical 3dB beam width (°)
12
11
10
9
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 28
0°
Typ. 20
Cross polar ratio (dB)
Typ. 10
±60°
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
Antenna net weight (kg)
790 x 155 x 109
5.5
Bracket weight (kg)
2.6
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 170 (at 150 km/h)
Lateral: 85 (at 150 km/h)
Rear side: 195 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
10
17
Issue: 2013-01-08
2 x 7/16 DIN Female
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
0M
69
-2 X
D
64
DX-1710-2690-65-18i-M
Model: A26451800v01
Preliminary Issue
Electrical Properties
1710 - 2690
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable
Gain (dBi)
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
17.3
17.4
17.2
17.6
17.8
17.5
17.7
18.0
17.5
17.8
18.0
17.3
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
18
17
16
18
17
16
18
17
16
17
17
16
16
16
15
16
16
15
16
16
15
15
16
15
Side lobe suppression (Typ.) (dB)
-for first side lobe above main beam
-within 0° - 15° sector above horizon
Horizontal 3dB beam width (°)
66
63
60
60
Vertical 3dB beam width (°)
6.7
6.1
5.5
4.9
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 30
0°
Typ. 20
±60°
Typ. 10
Cross polar ratio (dB)
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Typ. 3.0
Tracking (dB)
Avg. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
1365 x 155 x 109
Antenna net weight (kg)
6.7
Bracket weight (kg)
2.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 215 (at 150 km/h)
Lateral: 200 (at 150 km/h)
Rear side: 370 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
M
Hz
Bottom
65
Connector position
2 x 7/16 DIN Female
-2
DX 690
Connector
10
Wind load (N)
17
Antenna dimensions (H x W x D) (mm)
DX-1710-2690-65-18i-M
Model: A26451800v01
Preliminary Issue
1710 - 2200
X
+45°
7/16 (F)
-45°
7/16 (F)
1710 - 2200 MHz
2200 - 2690 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
10
17
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
0M
69
-2 X
D
66
DX-1710-2690-65-18i-M-R
EasyRET Single-Band Antenna with 1 Integrated RCU - 1.4m
Model: A264518R0
Preliminary Issue
Electrical Properties
1710 - 2690
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12, continuously adjustable
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
17.3
17.4
17.2
17.6
17.8
17.5
17.7
18.0
17.5
17.8
18.0
17.3
Side lobe suppression (Typ.) (dB)
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
-for first side lobe above main beam
18
17
16
18
17
16
18
17
16
17
17
16
-within 0° - 15° sector above horizon
16
16
15
16
16
15
16
16
15
15
16
15
Gain (dBi)
Horizontal 3dB beam width (°)
66
63
60
60
Vertical 3dB beam width (°)
6.7
6.1
5.5
4.9
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 30
0°
Typ. 20
±60°
Typ. 10
Cross polar ratio (dB)
Max. power per input (W)
250 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Typ. 3.0
Tracking (dB)
Avg. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
1365 x 155 x 109
Antenna net weight (kg)
7.6
Bracket weight (kg)
2.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal: 210 (at 150 km/h)
Lateral: 170 (at 150 km/h)
Rear side: 370 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
M
Hz
Bottom
67
Connector position
2 x 7/16 DIN Female
-2
DX 690
Connector
10
Wind load (N)
17
Antenna dimensions (H x W x D) (mm)
DX-1710-2690-65-18i-M-R
EasyRET Single-Band Antenna with 1 Integrated RCU - 1.4m
Model: A264518R0
Preliminary Issue
RET Properties
RET Type
Integrated RET
RET Protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 10 (motor activated)
< 0.5 (stand by)
Adjustment time (full range) (min)
< 50 (typically, depending on antenna type)
RET Connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
DC
n/c
RS-485B
n/c
Lightning protection (kA)
5
6
7
8
RS-485A DC in/out DC return
n/c
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about
protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
HINT
Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical
support personnel of Huawei.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
10
17
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
0M
69
-2 X
D
68
DX-1710-2690-65-19.5i-M
Model: A26451900v01
Preliminary Issue
Electrical Properties
1710 - 2690
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
Electrical downtilt (°)
0 - 8 , continuously adjustable
Gain (dBi)
0°
4°
8°
0°
4°
8°
0°
4°
8°
0°
4°
8°
18.0
18.1
18.0
18.3
18.6
18.5
19.0
19.2
19.0
19.0
19.3
19.0
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
0°
4°
8°
0°
4°
8°
0°
4°
8°
0°
4°
8°
17
17
15
17
17
16
17
17
16
17
17
16
Horizontal 3dB beam width (°)
69
65
Vertical 3dB beam width (°)
5.2
4.8
VSWR
62
60
4.4
3.9
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 28
0°
Typ. 20
Cross polar ratio (dB)
2490 - 2690
+45° , -45°
Typ. 10
±60°
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Typ. 3.0
Tracking (dB)
Avg. 1 .0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
1690 x 155 x 109
9.0
Bracket weight (kg)
2.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
Connector position
2 x 7/16 DIN Female
M
Connector
69
Wind load (N)
-55 .. +65
Frontal: 275 (at 150 km/h)
Lateral: 255 (at 150 km/h)
Rear side: 475 (at 150 km/h)
-2
DX 690
Operational temperature (℃)
10
Antenna net weight (kg)
17
Antenna dimensions (H x W x D) (mm)
DXX-790-862/880-960-65/65-14.5i/15i-M/M-R
Model: ADU4515R0
Preliminary Issue
Electrical Properties
Frequency range (MHz)
790 - 862
880 - 960
Polarization
+45° , -45°
Electrical downtilt (°)
Gain (dBi)
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
0 - 12, continuously adjustable
0 - 14, continuously adjustable
0°
7°
14°
0°
7°
14°
14.3
14.1
13.7
14.7
14.5
14.2
0°
7°
14°
0°
7°
14°
16
15
15
16
15
15
Horizontal 3dB beam width (°)
66
61
Vertical 3dB beam width (°)
16.6
14.4
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
≥ 25
Cross polar ratio (dB)
0°
Typ. 20
Typ. 20
±60°
≥ 10
Typ. 10
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1536 x 349 x 166
Antenna net weight (kg)
19
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Frontal: 460 (at 150 km/h)
Lateral: 215 (at 150 km/h)
Rear side: 670 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
RET Type
4 x 7/16 DIN Female
Bottom
Internal motor
0
79
RET Protocols
AISG 1.1 / AISG 2.0
RET Connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
70
Hz
M
60
-9
80
/8
X
62 DX
-8
DXX-790-862/880-960-65/65-14.5i/15i-M/M-R
Model: ADU4515R0
Preliminary Issue
RET Properties
RET Type
Internal motor
RET Protocols
AISG 1.1 / AISG 2.0
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 10 (motor activated)
< 0.5 (stand by)
Adjustment time (full range) (min)
< 1.5 (typically, depending on antenna type)
Calibration time (min)
< 3 (typically, depending on antenna type)
RET Connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
DC
n/c
RS-485B
n/c
y EN 60950-1 (Safety)
6
7
8
RS-485A DC in/out DC return
n/c
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
Standards:
5
Certification:
CE, FCC, RoHS, WEEE
y EN 55022 (Emission)
y EN 55024 (Immunity)
y ETSI EN300386 (1.4.1)
y FCC part15
HINT
Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical
support personnel of Huawei.
Issue: 2013-01-08
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
71
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
-8
62
/8
8
DX 0 96
X
0M
Hz
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
0
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXX-790-862/880-960-65/65-16i/16.5i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs-2.0m
Model: ADU4516R0
Electrical Properties
Frequency range (MHz)
790 - 862
880 - 960
Polarization
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable
0°
6°
12°
0°
6°
12°
15.6
16.0
15.7
16.3
16.8
16.3
Side lobe suppression (Typ.) (dB)
0°
6°
12°
0°
6°
12°
-for first side lobe above main beam
20
20
17
20
20
17
-within 0° - 15° sector above horizon
16
16
15
16
15
15
Gain (dBi)
Horizontal 3dB beam width (°)
69
65
Vertical 3dB beam width (°)
10.5
9.4
< 1.5
VSWR
Isolation between ports (dB)
Intra-system: ≥ 30
Inter-system (790 - 862 // 880 - 960 MHz): ≥ 30
Front to back ratio, copolar (dB)
> 25
Typ. 28
0°
Typ. 23
Typ. 25
±60°
≥ 10
≥ 10
Cross polar ratio (dB)
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Squint (°)
Typ. 2.0
Tracking (dB)
Avg. 1.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1999 x 259 x 135
Antenna net weight (kg)
21.5
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Frontal: 685 (at 150 km/h)
Lateral: 360 (at 150 km/h)
Rear side: 910 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
0
79
Connector position
4 x 7/16 DIN Female
Bottom
72
Hz
M
60
-9
80
/8
X
62 DX
-8
DXX-790-862/880-960-65/65-16i/16.5i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs-2.0m
Model: ADU4516R0
RET Properties
RET Type
Integrated RET
RET Protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 10 (motor activated)
< 0.5 (stand by
Adjustment time (full range) (min)
< 37 (typically, depending on antenna type)
RET Connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
DC
n/c
RS-485B
n/c
5
6
7
8
RS-485A DC in/out DC return
n/c
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about
protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
Integrated RCU S/N: a HWMxxx….r
b HWMxxx…rr
r - Red
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
73
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
-8
62
/8
8
DX 0 96
X
0M
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
880 - 960 MHz
79
0
790 - 862 MHz
DXX-790-862/880-960-65/65-17i/17.5i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs-2.6m
Model: ADU4517R0
Electrical Properties
Frequency range (MHz)
790 - 862
880 - 960
Polarization
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable
0°
5°
10°
0°
5°
10°
16.4
16.8
16.4
17.1
17.5
17.2
Side lobe suppression (Typ.) (dB)
0°
5°
10°
0°
5°
10°
-for first side lobe above main beam
18
18
17
18
18
18
-within 0° - 15° sector above horizon
16
16
15
16
16
16
Gain (dBi)
Horizontal 3dB beam width (°)
68
65
Vertical 3dB beam width (°)
8.3
7.2
< 1.5
VSWR
Intra-system: ≥ 30
Inter-system (790 - 862 // 880 - 960 MHz): ≥ 30
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Typ. 28
Typ. 30
0°
Typ. 23
Typ. 25
±60°
≥ 10
≥ 10
Cross polar ratio (dB)
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Squint (°)
Typ. 1.5
Tracking (dB)
Avg. 1.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2538 x 259 x 135
Antenna net weight (kg)
25.5
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Frontal: 910 (at 150 km/h)
Lateral: 470 (at 150 km/h)
Rear side: 1200 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
0
79
Connector position
4 x 7/16 DIN Female
Bottom
74
Hz
M
60
-9
80
/8
X
62 DX
-8
DXX-790-862/880-960-65/65-17i/17.5i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs-2.6m
Model: ADU4517R0
RET Properties
RET Type
Integrated RET
RET Protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 10 (motor activated)
< 0.5 (stand by)
Adjustment time (full range) (min)
< 37 (typically, depending on antenna type)
RET Connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
DC
n/c
RS-485B
n/c
5
6
7
8
RS-485A DC in/out DC return
n/c
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about
protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
Integrated RCU S/N: a HWMxxx….r
b HWMxxx…rr
r - Red
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
75
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
-8
62
/8
8
DX 0 96
X
0M
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
880 - 960 MHz
79
0
790 - 862 MHz
DXX-790-960/1710-2180-65/65-15i/17.5i-M/M
Model: ADU451503
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 14, continuously adjustable
0°
Gain (dBi)
7°
14°
0°
7°
14°
0°
7°
0 - 10, continuously adjustable
14°
0°
5°
10°
0°
5°
10°
0°
5°
10°
14.6 14.5 14.3 15.0 14.7 14.5 15.1 15.0 14.5 16.7 16.8 16.6 17.0 17.3 16.6 17.5 17.6 16.7
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 18
7°
14°
0°
7°
14°
0°
7°
14°
0°
5°
10°
0°
5°
10°
0°
5°
10°
18
17
18
18
17
17
15
15
19
17
17
19
16
17
19
16
17
Horizontal 3dB beam width (°)
69
66
64
65
63
60
Vertical 3dB beam width (°)
15.7
15.0
14.0
7.5
7.1
6.6
VSWR
< 1.5
Intra-system: ≥ 30
Inter-system (790 - 960 // 1710 - 2180 MHz): ≥ 40
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 28
Typ. 28
0°
Typ. 25
Typ. 20
±60°
Typ. 10
Typ. 10
500 (at 50 ℃ ambient temperature)
300 (at 50 ℃ ambient temperature)
Max. power per input (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.0
Tracking (dB)
Avg. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1360 x 259 x 135
Antenna net weight (kg)
13.7
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 440 (at 150 km/h)
Lateral: 230 (at 150 km/h)
Rear side: 585 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
0
79
Connector position
4 x 7/16 DIN Female
Bottom
76
Hz
0M
18
-2
0
71 X
/1
DX
60
-9
DXX-790-960/1710-2180-65/65-15i/17.5i-M/M
Model: ADU451503
56
55
70
Unit: mm
790 - 960
X
1710 - 2180
X
+45°
-45°
+45°
-45°
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
790 - 960 MHz
1710 - 2180 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
77
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
-9
60
/1
71
DX 0 21
X
80
M
Hz
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
0
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M
Model: ADU451602v01
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 12, continuously adjustable
0°
Gain (dBi)
6°
12°
0°
6°
12°
0°
6°
0 - 8, continuously adjustable
12°
0°
4°
8°
0°
4°
8°
0°
4°
8°
15.7 15.7 15.3 16.0 16.0 15.5 16.2 16.0 15.6 18.0 18.5 18.3 18.2 18.7 18.3 18.3 18.7 18.3
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 20
6°
12°
0°
6°
12°
0°
6°
12°
0°
4°
8°
0°
4°
8°
0°
4°
8°
17
15
20
18
15
17
18
15
20
18
18
18
17
15
18
15
15
Horizontal 3dB beam width (°)
69
66
64
65
63
60
Vertical 3dB beam width (°)
10.6
10.2
9.5
5.2
5.0
4.7
VSWR
< 1.5
Intra-system: ≥ 30
Inter-system (790 - 960 // 1710 - 2180 MHz): ≥ 40
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 28
Typ. 30
0°
Typ. 25
Typ. 20
±60°
Typ. 10
Typ. 10
500 (at 50 ℃ ambient temperature)
300 (at 50 ℃ ambient temperature)
Max. power per input (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.5
Tracking (dB)
Avg. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1936 x 259 x 135
Antenna net weight (kg)
17.3
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 665 (at 150 km/h)
Lateral: 345 (at 150 km/h)
Rear side: 880 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
0
79
Connector position
4 x 7/16 DIN Female
Bottom
78
Hz
0M
18
-2
0
71 X
/1
DX
60
-9
DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M
Model: ADU451602v01
56
55
70
Unit: mm
790 - 960
X
1710 - 2180
X
+45°
-45°
+45°
-45°
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
790 - 960 MHz
1710 - 2180 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
79
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
-9
60
/1
71
DX 0 21
X
80
M
Hz
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
0
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m
Model: ADU4518R3
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable
0°
Gain (dBi)
6°
12°
0°
6°
12°
0°
6°
0 - 8 , continuously adjustable
12°
0°
4°
8°
0°
4°
8°
0°
4°
8°
15.7 15.7 15.3 16.0 16.0 15.5 16.2 16.0 15.6 18.0 18.5 18.3 18.2 18.7 18.3 18.3 18.7 18.3
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 20
6°
12°
0°
6°
12°
0°
6°
12°
0°
4°
8°
0°
4°
8°
0°
4°
8°
17
15
20
18
15
17
18
15
20
18
18
18
17
15
18
15
15
Horizontal 3dB beam width (°)
69
66
64
65
63
60
Vertical 3dB beam width (°)
10.6
10.2
9.5
5.2
5.0
4.7
VSWR
< 1.5
Intra-system: ≥ 30
Inter-system (790 - 960 // 1710 - 2180 MHz): ≥ 40
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 28
Typ. 30
0°
Typ. 25
Typ. 20
±60°
Typ. 10
Typ. 10
500 (at 50℃ ambient temperature)
300 (at 50℃ ambient temperature)
Max. power per input (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.5
Tracking (dB)
Avg. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1936 x 259 x 135
Antenna net weight (kg)
18.3
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Frontal: 665 (at 150 km/h)
Lateral: 345 (at 150 km/h)
Rear side: 880 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
0
79
Connector position
4 x 7/16 DIN Female
Bottom
80
Hz
0M
18
-2
0
71 X
/1
DX
60
-9
DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.0m
Model: ADU4518R3
RET Properties
RET Type
Integrated RET
RET Protocols
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 10 (motor activated)
< 0.5 (stand by)
Adjustment time (full range) (min)
< 37 (typically, depending on antenna type)
RET Connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
DC
n/c
RS-485B
n/c
5
6
7
8
RS-485A DC in/out DC return
n/c
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about
protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
Integrated RCU S/N: a HWMxxx…r
b HWMxxx…b
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
81
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
1710 - 2180 MHz
-9
60
/1
71
DX 0 21
X
80
M
Hz
790 - 960 MHz
b - Blue
79
0
r - Red
DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M
Model: ADU451807v01
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
0°
Gain (dBi)
5°
10°
0°
5°
10°
0°
5°
0 - 8, continuously adjustable
10°
0°
4°
8°
0°
4°
8°
0°
4°
8°
16.6 16.7 16.5 16.9 17.0 16.8 17.0 17.2 16.9 18.1 18.4 18.0 18.3 18.6 18.2 18.3 18.6 18.0
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 19
5°
10°
0°
5°
10°
0°
5°
10°
0°
4°
8°
0°
4°
8°
0°
4°
8°
19
18
19
19
18
19
18
17
18
16
18
20
16
18
20
16
18
Horizontal 3dB beam width (°)
69
66
65
64
62
60
Vertical 3dB beam width (°)
8.4
8.0
7.5
5.2
4.9
4.6
VSWR
< 1.5
Intra-system: ≥ 30
Inter-system: ≥ 40
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 28
Typ. 29
0°
Typ. 30
Typ. 20
±60°
Typ. 10
Typ. 10
500 (at 50 ℃ ambient temperature)
300 (at 50 ℃ ambient temperature)
Max. power per input (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.5
Tracking (dB)
Avg. 1.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2535 x 259 x 135
Antenna net weight (kg)
21
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 910 (at 150 km/h)
Lateral: 470 (at 150 km/h)
Rear side: 1200 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
0
79
Connector position
4 x 7/16 DIN Female
Bottom
82
Hz
0M
18
-2
0
71 X
/1
DX
60
-9
DXX-790-960/1710-2180-65/65-17i/18.5i-M/M
Model: ADU451807v01
56
55
Unit: mm
70
790 - 960
X
1710 - 2180
X
+45°
-45°
+45°
-45°
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
790 - 960 MHz
1710 - 2180 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
83
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
-9
60
/1
71
DX 0 21
X
80
M
Hz
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
0
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m
Model: ADU4518R0
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable
0°
Gain (dBi)
5°
10°
0°
5°
10°
0°
5°
0 - 8 , continuously adjustable
10°
0°
4°
8°
0°
4°
8°
0°
4°
8°
16.6 16.7 16.5 16.9 17.0 16.8 17.0 17.2 16.9 18.1 18.4 18.0 18.3 18.6 18.2 18.3 18.6 18.0
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 19
5°
10°
0°
5°
10°
0°
5°
10°
0°
4°
8°
0°
4°
8°
0°
4°
8°
19
18
19
19
18
19
18
17
18
16
18
20
16
18
20
16
18
Horizontal 3dB beam width (°)
69
66
65
64
62
60
Vertical 3dB beam width (°)
8.4
8.0
7.5
5.2
4.9
4.6
VSWR
< 1.5
Intra-system: ≥ 30
Inter-system (790 - 960 // 1710 - 2180 MHz): ≥ 40
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 28
Typ. 29
0°
Typ. 30
Typ. 20
±60°
Typ. 10
Typ. 10
500 (at 50℃ ambient temperature)
300 (at 50℃ ambient temperature)
Max. power per input (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.5
Tracking (dB)
Avg. 1.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2535 x 259 x 135
Antenna net weight (kg)
22.2
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Frontal: 910 (at 150 km/h)
Lateral: 470 (at 150 km/h)
Rear side: 1200 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
0
79
Connector position
4 x 7/16 DIN Female
Bottom
84
Hz
0M
18
-2
0
71 X
/1
DX
60
-9
DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 2.6m
Model: ADU4518R0
RET Properties
RET Type
Integrated RET
RET Protocols
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 10 (motor activated)
< 0.5 (stand by)
Adjustment time (full range) (min)
< 37 (typically, depending on antenna type)
RET Connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
DC
n/c
RS-485B
n/c
5
6
7
8
RS-485A DC in/out DC return
n/c
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about
protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
Integrated RCU S/N: a HWMxxx…r
b HWMxxx…b
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
85
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
1710 - 2180 MHz
-9
60
/1
71
DX 0 21
X
80
M
Hz
790 - 960 MHz
b - Blue
79
0
r - Red
DXX-790-960/1710-2180-65/65-15i/17.5i-M/M-C
Model: ADU4517C0
Preliminary Issue
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable
0°
Gain (dBi)
7°
14°
0°
7°
14°
0°
0 - 10 , continuously adjustable
7°
14°
0°
5°
10°
0°
5°
10°
0°
5°
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 18
7°
14°
0°
7°
14°
0°
7°
14°
0°
5°
10°
0°
5°
10°
0°
5°
10°
18
17
18
18
17
17
15
15
19
17
17
19
16
17
19
16
17
Horizontal 3dB beam width (°)
69
66
64
65
63
60
Vertical 3dB beam width (°)
15.7
15.0
14.0
7.5
7.1
6.6
VSWR
< 1.5
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
10°
14.6 14.5 14.3 15.0 14.7 14.5 15.1 15.0 14.5 16.7 16.8 16.6 17.0 17.3 16.6 17.5 17.6 16.7
0°
±60°
Max. power per input (W)
Intra-system: ≥ 30
Typ. 28
Typ. 28
Typ. 25
Typ. 20
Typ. 10
Typ. 10
250 (at 50℃ ambient temperature)
200 (at 50℃ ambient temperature)
Total power per combined input (W)
450 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.0
Tracking (dB)
Avg. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
Antenna net weight (kg)
1360 x 259 x 135
13.7
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
Wind load (N)
-55 .. +65
Frontal: 440 (at 150 km/h)
Lateral: 230 (at 150 km/h)
Rear side: 585 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
0
79
86
Hz
0M
18
-2
0
71 X
/1
DX
60
-9
Issue: 2013-01-08
2 x 7/16 DIN Female
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-C
Model: ADU4518C1
Preliminary Issue
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable
0°
Gain (dBi)
6°
12°
0°
6°
12°
0°
0 - 8 , continuously adjustable
6°
12°
0°
4°
8°
0°
4°
8°
0°
4°
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 20
6°
12°
0°
6°
12°
0°
6°
12°
0°
4°
8°
0°
4°
8°
0°
4°
8°
17
15
20
18
15
17
18
15
20
18
18
18
17
15
18
15
15
Horizontal 3dB beam width (°)
69
66
64
65
63
60
Vertical 3dB beam width (°)
10.6
10.2
9.5
5.2
5.0
4.7
VSWR
< 1.5
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
8°
15.7 15.7 15.3 16.0 16.0 15.5 16.2 16.0 15.6 18.0 18.5 18.3 18.2 18.7 18.3 18.3 18.7 18.3
0°
±60°
Max. power per input (W)
Intra-system: ≥ 30
Typ. 28
Typ. 30
Typ. 25
Typ. 20
Typ. 10
Typ. 10
250 (at 50℃ ambient temperature)
200 (at 50℃ ambient temperature)
Total power per combined input (W)
450 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.5
Tracking (dB)
Avg. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
1936 x 259 x 135
17.3
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Wind load (N)
-55 .. +65
Frontal: 665 (at 150 km/h)
Lateral: 345 (at 150 km/h)
Rear side: 880 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
2 x 7/16 DIN Female
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
87
Operational temperature (℃)
-9
60
/1
71
DX 0 21
X
80
M
Hz
Antenna net weight (kg)
79
0
Antenna dimensions (H x W x D) (mm)
DXX-790-960/1710-2180-65/65-17i/18.5i-M/M-C
Model: ADU4518C0
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
0°
Gain (dBi)
5°
10°
0°
5°
10°
0°
5°
0 - 8, continuously adjustable
10°
0°
4°
8°
0°
4°
8°
0°
4°
8°
16.6 16.7 16.5 16.9 17.0 16.8 17.0 17.2 16.9 18.1 18.4 18.0 18.3 18.6 18.2 18.3 18.6 18.0
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 19
5°
10°
0°
5°
10°
0°
5°
10°
0°
4°
8°
0°
4°
8°
0°
4°
8°
19
18
19
19
18
19
18
17
18
16
18
20
16
18
20
16
18
Horizontal 3dB beam width (°)
69
66
65
64
62
60
Vertical 3dB beam width (°)
8.4
8.0
7.5
5.2
4.9
4.6
VSWR
< 1.5
Isolation between ports (dB)
Intra-system: ≥ 30
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 28
Typ. 29
0°
Typ. 30
Typ. 20
±60°
Typ. 10
Typ. 10
250 (at 50℃ ambient temperature)
200 (at 50℃ ambient temperature)
Max. power per input (W)
Total power per combined input (W)
450 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.5
Tracking (dB)
Avg. 1.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2535 x 259 x 135
Antenna net weight (kg)
20.8
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 910 (at 150 km/h)
Lateral: 470 (at 150 km/h)
Rear side: 1200 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
0
79
Connector position
2 x 7/16 DIN Female
Bottom
88
Hz
0M
18
-2
0
71 X
/1
DX
60
-9
DXX-790-960/1710-2180-65/65-17i/18.5i-M/M-C
Model: ADU4518C0
54
70
70
Unit: mm
790 - 960
X
+45°
1710 - 2180
X
-45°
+45°
-45°
C
C
7/16 (F)
7/16 (F)
790 - 960 MHz
1710 - 2180 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
89
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
-9
60
/1
71
DX 0 21
X
80
M
Hz
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
0
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-ESLS
Model: ADU451820
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 12, continuously adjustable
0°
Gain (dBi)
6°
12°
0°
6°
12°
0°
6°
0 - 8, continuously adjustable
12°
0°
4°
8°
0°
4°
8°
0°
4°
8°
15.7 15.7 15.3 16.0 16.0 15.5 16.2 16.0 15.6 18.0 18.3 18.1 18.2 18.5 18.1 18.3 18.5 18.1
Side lobe suppression (Typ.) (dB)
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
4°
8°
0°
4°
8°
0°
4°
8°
-for first side lobe above main beam
20
17
15
20
18
15
17
18
15
20
18
18
18
17
15
18
15
15
-within 0° - 15° sector above horizon
15
16
15
15
16
15
15
16
15
16
16
15
16
16
15
16
16
15
Horizontal 3dB beam width (°)
69
66
64
65
63
60
Vertical 3dB beam width (°)
10.6
10.2
9.5
5.2
5.0
4.7
VSWR
< 1.5
Intra-system: ≥ 30
Inter-system (790 - 960 // 1710 - 2180 MHz): ≥ 40
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 28
Typ. 30
0°
Typ. 25
Typ. 20
±60°
Typ. 10
Typ. 10
500 (at 50 ℃ ambient temperature)
300 (at 50 ℃ ambient temperature)
Max. power per input (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.5
Tracking (dB)
Avg. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1936 x 259 x 135
Antenna net weight (kg)
18.1
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 665 (at 150 km/h)
Lateral: 345 (at 150 km/h)
Rear side: 880 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
0
79
Connector position
4 x 7/16 DIN Female
Bottom
90
Hz
0M
18
-2
0
71 X
/1
DX
60
-9
DXX-790-960/1710-2180-65/65-16.5i/18.5i-M/M-ESLS
Model: ADU451820
56
55
Unit: mm
70
790 - 960
X
1710 - 2180
X
+45°
-45°
+45°
-45°
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
790 - 960 MHz
1710 - 2180 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
91
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
-9
60
/1
71
DX 0 21
X
80
M
Hz
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
0
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M-ESLS
Model: ADU451821
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
1710 - 2180
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
0°
Gain (dBi)
5°
10°
0°
5°
10°
0°
5°
0 - 8, continuously adjustable
10°
0°
4°
8°
0°
4°
8°
0°
4°
8°
16.6 16.7 16.5 16.9 17.0 16.8 17.0 17.2 16.9 18.1 18.4 18.0 18.3 18.5 18.2 18.3 18.5 18.0
Side lobe suppression (Typ.) (dB)
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
4°
8°
0°
4°
8°
0°
4°
8°
-for first side lobe above main beam
19
19
18
19
19
18
19
18
17
18
16
18
20
16
18
20
16
18
-within 0° - 15° sector above horizon
15
16
15
15
16
15
15
16
15
16
16
15
16
16
15
16
16
15
Horizontal 3dB beam width (°)
69
66
65
64
62
60
Vertical 3dB beam width (°)
8.4
8.0
7.5
5.2
4.9
4.6
VSWR
< 1.5
Intra-system: ≥ 30
Inter-system (790 - 960 // 1710 - 2180 MHz): ≥ 40
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 28
Typ. 29
0°
Typ. 30
Typ. 20
±60°
Typ. 10
Typ. 10
500 (at 50 ℃ ambient temperature)
300 (at 50 ℃ ambient temperature)
Max. power per input (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.5
Tracking (dB)
Avg. 1.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2535 x 259 x 135
Antenna net weight (kg)
21.6
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 910 (at 150 km/h)
Lateral: 470 (at 150 km/h)
Rear side: 1200 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
0
79
Connector position
4 x 7/16 DIN Female
Bottom
92
Hz
0M
18
-2
0
71 X
/1
DX
60
-9
DXX-790-960/1710-2180-65/65-17.5i/18.5i-M/M-ESLS
Model: ADU451821
56
55
Unit: mm
70
790 - 960
X
1710 - 2180
X
+45°
-45°
+45°
-45°
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
790 - 960 MHz
1710 - 2180 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
93
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
-9
60
/1
71
DX 0 21
X
80
M
Hz
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
0
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXX-790-960/1710-2690-65/65-15i/17.5i-M/M
Model: ADU451716
Preliminary Issue
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
824 - 894
1710 - 2690
880 - 960
Polarization
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable
0°
Gain (dBi)
7°
14°
0°
7°
14°
0°
0 - 10 , continuously adjustable
7°
14°
0°
5°
10°
0°
5°
10°
0°
5°
10°
14.5 14.3 14 14.7 14.5 14.1 15.0 14.9 14.4 16.6 16.8 16.2 16.9 17.0 16.2 17.0 17.2 16.5
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 16
7°
14°
0°
15
15
16
Horizontal 3dB beam width (°)
69
66
64
Vertical 3dB beam width (°)
7°
14°
0°
15
15
16
7°
14°
0°
15
15
16
16.6
15.5
14.4
VSWR
5°
10°
0°
16
15
16
5°
10°
0°
5°
10°
16
15
16
16
15
64
62
60
6.8
6.4
5.9
< 1.5
Intra-system: ≥ 28
Inter-system: ≥ 40
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
1710 - 1880
0°
±60°
Max. power per input (W)
Typ. 27
Typ. 28
Typ. 20
Typ. 20
Typ. 10
Typ. 10
500 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
Antenna net weight (kg)
1450 x 298 x 148
17
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 14
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
Wind load (N)
-55 .. +65
Frontal: 375 (at 150 km/h)
Lateral: 170 (at 150 km/h)
Rear side: 595 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
0
79
94
Hz
0M
69
-2
0
71 X
/1
DX
60
-9
Issue: 2013-01-08
4 x 7/16 DIN Female
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DXX-790-960/1710-2690-65/65-16i/18.5i-M/M
Model: ADU451604
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
824 - 894
1710 - 2690
880 - 960
Polarization
1710 - 1880 1850 - 1990 1920 - 2170 2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
0°
Gain (dBi)
5° 10° 0°
5° 10° 0°
0 - 8, continuously adjustable
5° 10° 0°
4°
8°
0°
4°
8°
0°
4°
8°
0°
4°
8°
16.0 16.0 15.5 16.1 16.1 15.6 16.2 16.2 15.7 17.9 18.0 17.7 18.2 18.3 18.1 18.4 18.5 18.2 18.4 18.5 18.2
Side lobe suppression (Typ.) (dB)
0°
5° 10° 0°
5° 10° 0°
5° 10° 0°
4°
8°
0°
4°
8°
0°
4°
8°
0°
4°
-for first side lobe above main beam
18 18 18 18 18 18 18 18 18 18 18 17 18 17 17 18 17 17 18 18 17
-within 0° - 15° sector above horizon
16 16 15 16 16 15 16 16 15 15 16 15 15 16 15 15 16 15 15 15 15
Horizontal 3dB beam width (°)
66
64
63
64
62
60
61
Vertical 3dB beam width (°)
9.8
9.5
8.9
5.4
5.1
4.9
3.9
VSWR
< 1.5
Intra-system: ≥ 30
Isolation between ports (dB)
Intra-system: ≥ 28
Inter-system (790 - 960 // 1710 - 2690 MHz): ≥ 30
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
8°
Typ. 28
Typ. 30
0°
Typ. 20
Typ. 20
Typ. 20
±60°
Typ. 10
Typ. 10
Typ. 8
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Typ. 2.5
Tracking (dB)
Avg. 1.5 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
2020 x 298 x 150
Antenna net weight (kg)
21.2
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 825 (at 150 km/h)
Lateral: 355 (at 150 km/h)
Rear side: 990 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector position
4 x 7/16 DIN Female
Bottom
95
Connector
-9
60
/1
71
DX 0 26
X
90
M
Hz
Wind load (N)
79
0
Antenna dimensions (H x W x D) (mm)
DXX-790-960/1710-2690-65/65-16i/18.5i-M/M
Model: ADU451604
60
59
Unit: mm
112
790 - 960
X
1710 - 2690
X
+45°
-45°
+45°
-45°
7/16 (F)
7/16 (F)
7/16 (F)
7/16 (F)
790 - 960 MHz
1710 - 2690 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
0
79
96
Hz
0M
69
-2
0
71 X
/1
DX
60
-9
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DXX-790-960/1710-2690-65/65-17i/18.5i-M/M
Model: ADU451712
Preliminary Issue
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
824 - 894
1710 - 2690
880 - 960
Polarization
1710 - 1880 1850 - 1990 1920 - 2170 2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
0 - 8, continuously adjustable
0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 4° 8° 0° 4° 8° 0° 4° 8° 0° 4° 8°
Gain (dBi)
16.6 16.8 16.1 16.7 16.9 16.5 16.6 17.0 16.8 17.9 18.0 17.7 18.2 18.3 18.1 18.4 18.5 18.2 18.4 18.5 18.2
Side lobe suppression (Typ.) (dB)
0° 5° 10° 0° 5° 10° 0° 5° 10° 0° 4° 8° 0° 4° 8° 0° 4° 8° 0° 4° 8°
-for first side lobe above main beam
18 18 18 18 18 18 18 18 18 18 18 17 18 17 17 18 17 17 18 18 17
-within 0° - 15° sector above horizon
16 16 15 16 16 15 16 16 15 15 16 15 15 16 15 15 16 15 15 15 15
Horizontal 3dB beam width (°)
67
65
64
64
62
60
61
Vertical 3dB beam width (°)
8.5
8.2
7.7
5.4
5.1
4.9
3.9
VSWR
< 1.5
Intra-system: ≥ 30
Isolation between ports (dB)
Inter-system (790 - 960 // 1710 - 2690 MHz): ≥ 30
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Intra-system: ≥ 28
Typ. 28
Typ. 30
0°
Typ. 20
Typ. 20
Typ. 20
±60°
Typ. 10
Typ. 10
Typ. 8
Max. power per input (W)
500 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
250 (at 50℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Typ. 2.5
Tracking (dB)
Avg. 1.5 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
2520 x 298 x 150
Antenna net weight (kg)
24.5
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 1060 (at 150 km/h)
Lateral: 455 (at 150 km/h)
Rear side: 1275 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector position
4 x 7/16 DIN Female
Bottom
97
Connector
-9
60
/1
71
DX 0 26
X
90
M
Hz
Wind load (N)
79
0
Antenna dimensions (H x W x D) (mm)
DXX-790-960/1710-2690-65/65-17i/18.5i-M/M
Model: ADU451712
Preliminary Issue
60
59
Unit: mm
112
790 - 960
X
+45°
7/16 (F)
1710 - 2690
X
-45°
+45°
7/16 (F)
7/16 (F)
-45°
7/16 (F)
790 - 960 MHz
1710 - 2690 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
0
79
98
Hz
0M
69
-2
0
71 X
/1
DX
60
-9
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DXX-1710-2200/1710-2200-65/65-15.5i/15.5i-M/M
Model: ADU451611
Preliminary Issue
Electrical Properties
2 x (1710 - 2200)
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable
Gain (dBi)
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
15.2
15.2
15.0
15.4
15.3
15.0
15.5
15.4
15.2
15.5
15.4
15.0
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
17
16
15
17
16
15
17
16
15
16
15
15
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
Horizontal 3dB beam width (°)
67
64
61
60
Vertical 3dB beam width (°)
13.9
13.0
12.6
11.5
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 28
0°
Typ. 22
Typ. 10
±60°
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Squint (°)
Avg.2.0
Tracking (dB)
Avg.2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
701 x 323 x 89
Antenna net weight (kg)
9
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 20
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 285 (at 150 km/h)
Lateral: 50 (at 150 km/h)
Rear side: 320 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
4 x 7/16 DIN Female
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
22
00
M
Hz
Connector position
99
Connector
-2
20
0/
17
DX 10
X
Wind load (N)
17
10
Antenna dimensions (H x W x D) (mm)
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M
Model: ADU451819
Electrical Properties
2 x (1710 - 2200)
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
Gain (dBi)
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
17.0
17.4
17.1
17.3
17.7
17.4
17.6
18.0
17.4
17.5
18.0
17.4
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
18
17
17
19
18
18
19
18
17
19
18
17
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
Horizontal 3dB beam width (°)
67
64
61
60
Vertical 3dB beam width (°)
7.5
7.0
6.6
6.2
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 28
Cross polar ratio (dB)
0°
Typ. 22
±60°
Typ. 10
Max. power per input (W)
300 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2
Tracking (dB)
Avg. 1.5 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1311 x 323 x 89
Antenna net weight (kg)
12.8
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 565 (at 150 km/h)
Lateral: 105 (at 150 km/h)
Rear side: 640 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
10
17
Connector position
4 x 7/16 DIN Female
Bottom
Hz
0M
20
-2
10
17 X
0/
DX
20
-2
0
10
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M
Model: ADU451819
43
36
59
31
L - Left Column
R - Right Column
1710 - 2200
X
+45°
7/16 (F)
Unit: mm
1710 - 2200
X
-45°
7/16 (F)
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2200 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
www.huawei.com
22
00
M
Hz
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
10
1
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
-2
20
0/
17
DX 10
X
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
10
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m
Model: ADU4518R1
Electrical Properties
2 x (1710 - 2200)
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable
Gain (dBi)
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
17.0
17.4
17.1
17.3
17.7
17.4
17.6
18.0
17.4
17.5
18.0
17.4
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
18
17
17
19
18
18
19
18
17
19
18
17
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
Horizontal 3dB beam width (°)
67
64
61
60
Vertical 3dB beam width (°)
7.5
7.0
6.6
6.2
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 28
Cross polar ratio (dB)
0°
Typ. 22
±60°
Typ. 10
Max. power per input (W)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.0
Tracking (dB)
Avg. 1.5 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1311 x 323 x 89
Antenna net weight (kg)
13.6
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Frontal: 565 (at 150 km/h)
Lateral: 105 (at 150 km/h)
Rear side: 640 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
10
17
Connector position
4 x 7/16 DIN Female
Bottom
Hz
0M
20
-2
10
17 X
0/
DX
20
-2
2
10
DXX-1710-2200/1710-2200-65/65-18i/18i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m
Model: ADU4518R1
RET Properties
RET Type
Integrated RET
RET Protocols
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 10 (motor activated)
< 0.5 (stand by)
Adjustment time (full range) (min)
< 37 (typically, depending on antenna type)
RET Connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
DC
n/c
RS-485B
n/c
5
6
7
8
RS-485A DC in/out DC return
n/c
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about
protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
Integrated RCU S/N: a HWMxxx…..b
b HHWMxxx…bb
b - Blue
1710 - 2200 MHz
www.huawei.com
22
00
M
Hz
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
10
3
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
-2
20
0/
17
DX 10
X
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
10
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXX-1710-2200/1710-2200-65/65-19.5i/19.5i-M/M
Model: ADU451902
Electrical Properties
2 x (1710 - 2200)
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
1920 - 2170
2170 - 2200
+45° , -45°
Electrical downtilt (°)
0 - 6, continuously adjustable
Gain (dBi)
0°
3°
6°
0°
3°
6°
0°
3°
6°
0°
3°
6°
18.5
18.7
18.6
18.9
19.1
18.8
19.1
19.4
18.9
19.1
19.3
18.8
0°
3°
6°
0°
3°
6°
0°
3°
6°
0°
3°
6°
20
17
16
20
17
17
20
18
17
20
18
17
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
Horizontal 3dB beam width (°)
67
65
62
60
Vertical 3dB beam width (°)
5.0
4.7
4.5
4.1
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 28
Cross polar ratio (dB)
0°
Typ. 25
±60°
Typ. 10
Max. power per input (W)
300 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1954 x 323 x 89
Antenna net weight (kg)
17.3
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 890 (at 150 km/h)
Lateral: 170 (at 150 km/h)
Rear side: 1000 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
10
17
Connector position
4 x 7/16 DIN Female
Bottom
Hz
0M
20
-2
10
17 X
0/
DX
20
-2
4
10
DXX-1710-2200/1710-2200-65/65-19.5i/19.5i-M/M
Model: ADU451902
43
36
59
31
L - Left Column
R - Right Column
1710 - 2200
X
+45°
7/16 (F)
Unit: mm
1710 - 2200
X
-45°
7/16 (F)
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2200 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
www.huawei.com
22
00
M
Hz
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
10
5
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
-2
20
0/
17
DX 10
X
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
10
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXX-1710-2170/2490-2690-65/65-18i/18i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m
Model: ADU4518R5
Preliminary Issue
Electrical Properties
1710 - 2170
Frequency range (MHz)
1710 - 1880
1850 - 1990
Polarization
2490 - 2690
1920 - 2170
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
17.1
17.2
17.0
17.4
17.6
17.3
17.4
17.7
17.2
17.6
17.8
17.1
Side lobe suppression (Typ.) (dB)
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
-for first side lobe above main beam
18
17
16
18
17
16
18
17
16
17
17
16
-within 0° - 15° sector above horizon
16
16
15
16
16
15
16
16
15
15
16
15
Gain (dBi)
Horizontal 3dB beam width (°)
66
64
61
60
Vertical 3dB beam width (°)
6.5
6.2
5.5
4.7
VSWR
< 1.5
Isolation between ports (dB)
Intra-system: ≥ 30
Inter-system: ≥ 30
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 30
0°
Typ. 20
±60°
Typ. 10
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Typ. 3.0
Tracking (dB)
Avg. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1445 x 155 x 109
Antenna net weight (kg)
19.2
Bracket weight (kg)
2.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Frontal: 230 (at 150 km/h)
Lateral: 215 (at 150 km/h)
Rear side: 395 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
10
17
Connector position
4 x 7/16 DIN Female
Bottom
Hz
0M
69
-2
90
24 X
0/
DX
17
-2
6
10
DXX-1710-2170/2490-2690-65/65-18i/18i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m
Model: ADU4518R5
Preliminary Issue
RET Properties
RET Type
Integrated RET
RET Protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 10 (motor activated)
< 0.5 (stand by)
Adjustment time (full range) (min)
< 50 (typically, depending on antenna type)
RET Connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
DC
n/c
RS-485B
n/c
Lightning protection (kA)
5
6
7
8
RS-485A DC in/out DC return
n/c
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about
protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
HINT
Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical
support personnel of Huawei.
www.huawei.com
26
90
M
Hz
Issue: 2013-01-08
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
10
7
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
-2
17
0/
24
DX 90
X
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
10
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXX-1710-2690/1710-2690-65/65-16i/16i-M/M
Model: ADU451507
Preliminary Issue
Electrical Properties
2 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 14 , continuously adjustable
0°
7°
14°
0°
7°
14°
0°
7°
14°
0°
7°
14°
14.8
14.8
14.3
15.1
15.3
14.8
15.5
15.7
15.2
15.5
15.7
15.2
Side lobe suppression (Typ.) (dB)
0°
7°
14°
0°
7°
14°
0°
7°
14°
0°
7°
14°
-for first side lobe above main beam
17
16
15
17
16
15
17
16
15
17
16
15
-within 0° - 15° sector above horizon
16
15
15
16
15
15
16
15
15
16
15
15
Gain (dBi)
Horizontal 3dB beam width (°)
67
65
63
60
Vertical 3dB beam width (°)
12
11
10
9
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 28
Cross polar ratio (dB)
0°
Typ. 20
±60°
Typ. 10
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
790 x 299x 109
Antenna net weight (kg)
13
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
Wind load (N)
-55 .. +65
Frontal: 320 (at 150 km/h)
Lateral: 60 (at 150 km/h)
Rear side: 365 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
10
17
Any previous catalogue issues become invalid.
8
10
Hz
0M
69
-2
10
17 X
0/
DX
69
-2
Issue: 2013-01-08
4 x 7/16 DIN Female
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M
Model: ADU451816v01
Electrical Properties
2 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12, continuously adjustable
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
17.4
17.5
17.3
17.7
17.9
17.5
18.0
18.2
17.6
18.2
18.2
17.8
Side lobe suppression (Typ.) (dB)
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
-for first side lobe above main beam
18
17
16
18
17
16
18
17
16
18
17
16
-within 0° - 15° sector above horizon
15
16
16
16
17
16
18
16
16
16
17
16
Gain (dBi)
Horizontal 3dB beam width (°)
66
64
62
60
Vertical 3dB beam width (°)
6.5
6.0
5.3
4.8
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 28
Cross polar ratio (dB)
0°
Typ. 20
±60°
Typ. 10
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Typ. 5.0
Tracking (dB)
Typ. 3.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
1365 x 299 x 109
Antenna net weight (kg)
12.6
Bracket weight (kg)
3.7
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 490 (at 150 km/h)
Lateral: 100 (at 150 km/h)
Rear side: 565 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Bottom
9
26
90
M
Hz
Connector position
4 x 7/16 DIN Female
10
Connector
-2
69
0/
17
DX 10
X
Wind load (N)
17
10
Antenna dimensions (H x W x D) (mm)
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M
Model: ADU451816v01
55
58
83
Unit: mm
58
1710 - 2690
X
+45°
7/16 (F)
1710 - 2690
X
+45°
-45°
7/16 (F)
7/16 (F)
-45°
7/16 (F)
1710 - 2200 MHz
2200 - 2690 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
10
17
Any previous catalogue issues become invalid.
0
11
Hz
0M
69
-2
10
17 X
0/
DX
69
-2
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m
Model: ADU4518R6
Preliminary Issue
Electrical Properties
2 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
17.3
17.4
17.2
17.6
17.8
17.5
17.7
18.0
17.5
17.8
18.0
17.3
Side lobe suppression (Typ.) (dB)
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
-for first side lobe above main beam
18
17
16
18
17
16
18
17
16
17
17
16
-within 0° - 15° sector above horizon
16
16
15
16
16
15
16
16
15
15
16
15
Gain (dBi)
Horizontal 3dB beam width (°)
66
63
60
60
Vertical 3dB beam width (°)
6.7
6.1
5.5
4.9
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 28
Cross polar ratio (dB)
0°
Typ. 20
±60°
Typ. 10
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
1365 x 299 x 109
Antenna net weight (kg)
15.6
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal: 490 (at 150 km/h)
Lateral: 100 (at 150 km/h)
Rear side: 560 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
26
90
M
Hz
Connector position
4 x 7/16 DIN Female
Bottom
11
1
Connector
-2
69
0/
17
DX 10
X
Wind load (N)
17
10
Antenna dimensions (H x W x D) (mm)
DXX-1710-2690/1710-2690-65/65-18i/18i-M/M-R
EasyRET Dual-Band Antenna with 2 Integrated RCUs - 1.4m
Model: ADU4518R6
Preliminary Issue
RET Properties
RET Type
Integrated RET
RET Protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 10 (motor activated)
< 0.5 (stand by)
Adjustment time (full range) (min)
< 50 (typically, depending on antenna type)
RET Connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
DC
n/c
RS-485B
n/c
Lightning protection (kA)
5
6
7
8
RS-485A DC in/out DC return
n/c
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about
protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
HINT
Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical
support personnel of Huawei.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
10
17
Any previous catalogue issues become invalid.
2
11
Hz
0M
69
-2
10
17 X
0/
DX
69
-2
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DXX-1710-2690/1710-2690-65/65-19.5i/19.5i-M/M
Model: ADU451901v01
Preliminary Issue
Electrical Properties
2 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
+45° , -45°
Electrical downtilt (°)
0 - 8 , continuously adjustable
Gain (dBi)
0°
4°
8°
0°
4°
8°
0°
4°
8°
0°
4°
8°
18.0
18.1
18.0
18.3
18.6
18.5
19.0
19.2
19.0
19.0
19.3
19.0
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
0°
4°
8°
0°
4°
8°
0°
4°
8°
0°
4°
8°
18
17
16
18
17
16
18
17
16
17
17
16
Horizontal 3dB beam width (°)
66
63
Vertical 3dB beam width (°)
5.2
4.8
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 28
Cross polar ratio (dB)
2490 - 2690
0°
Typ. 20
±60°
Typ. 10
60
60
4.4
3.9
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
18
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 620 (at 150 km/h)
Lateral: 130 (at 150 km/h)
Rear side: 715 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector position
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
4 x 7/16 DIN Female
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
26
90
M
Hz
Connector
11
3
Wind load (N)
-2
69
0/
17
DX 10
X
Antenna net weight (kg)
1690 x 299 x 109
17
10
Antenna dimensions (H x W x D) (mm)
DXX-2300-2690/2300-2690-65/65-18i/18i-M
Model: A25451805
Electrical Properties
2 x (2300 - 2690)
Frequency range (MHz)
2300 - 2490
2490 - 2690
Polarization
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable
Gain (dBi)
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
0°
5°
10°
0°
5°
10°
17.0
17.4
17.3
17.4
17.8
17.0
0°
5°
10°
0°
5°
10°
20
20
19
20
18
20
Horizontal 3dB beam width (°)
64
61
Vertical 3dB beam width (°)
7.0
6.4
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 26
Cross polar ratio (dB)
Typ. 20
0°
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -150 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1060 x 289 x 85
Antenna net weight (kg)
10.2
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 230 (at 150 km/h)
Lateral: 100 (at 150 km/h)
Rear side: 340 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
00
23
Connector position
4 x 7/16 DIN Female
Bottom
Hz
0M
69
-2
00
23 X
0/
DX
69
-2
4
11
DXX-2300-2690/2300-2690-65/65-18i/18i-M
Model: A25451805
52
48
L - Left Column
R - Right Column
2300 - 2690
X
+45°
7/16 (F)
Unit: mm
2300 - 2690
X
-45°
+45°
7/16 (F)
7/16 (F)
-45°
7/16 (F)
1710 - 2200 MHz
2200 - 2690 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
www.huawei.com
26
90
M
Hz
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
11
5
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
-2
69
0/
23
DX 00
X
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
23
00
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXXX-790-960/1710-2180/1710-2180-65/65/65-14i/14i/14i-M/M/M
Model: ATR451500
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
2 x (1710 - 2180)
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 14, continuously adjustable
0°
7°
14°
0°
7°
14°
0°
0 - 14, continuously adjustable
7°
14°
0°
7°
14°
0°
7°
14°
0°
7°
14°
14.7 14.8 14.5 15.0 14.8 14.7 15.0 14.8 14.6
Gain (dBi)
Bottom
14.6 14.5 14.3 15.0 14.9 14.5 15.3 15.2 14.7
Top
14.5 14.5 14.0 14.9 14.7 14.1 15.1 15.0 14.3
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 18
7°
14°
0°
7°
14°
0°
7°
14°
0°
7°
14°
0°
7°
14°
0°
7°
14°
17
15
19
18
16
19
18
15
17
17
15
18
18
15
17
17
15
Horizontal 3dB beam width (°)
69
68
67
63
61
60
Vertical 3dB beam width (°)
15.5
14.8
13.8
13.6
12.8
12.1
VSWR
< 1.5
Intra-system: ≥ 30
Inter-system (790 - 960 / 1710 - 2180 MHz): ≥ 40
Inter-system (1710 - 2180 / 1710 - 2180 MHz): ≥ 30
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 28
Typ. 28
0°
Typ. 26
Typ. 20
±60°
Typ. 10
Typ. 10
500 (at 50 ℃ ambient temperature)
300 (at 50 ℃ ambient temperature)
Max. power per input (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.5
Tracking (dB)
Avg. 2.5 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
Antenna net weight (kg)
1454 x 259 x 135
15.1
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
Wind load (N)
-55 .. +65
Frontal: 480 (at 150 km/h)
Lateral: 250 (at 150 km/h)
Rear side: 635 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
6
11
0/
18
-2 z
H
0
71 M
/1 80
60 21 X
- 9 0 - XX
0
1 D
79 17
Connector position
6 x 7/16 DIN Female
Bottom
DXXX-790-960/1710-2180/1710-2180-65/65/65-14i/14i/14i-M/M/M
Model: ATR451500
61
44
17
56
55
70
T - Top Column B - Bottom Column
790 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2180
Bottom
X
+45°
-45°
7/16 (F)
7/16 (F)
790 - 960 MHz
Unit: mm
1710 - 2180
Top
X
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2180 MHz
(Bottom)
1710 - 2180 MHz
(Top)
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
11
7
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
0
17 96
10 0/1
71
DX 218 0 XX 0M 21
Hz 80
/
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXXX-790-960/1710-2180/1710-2180-65/65/65-16i/16i/16i-M/M/M
Model: ATR451602v01
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
2 x (1710 - 2180)
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 12, continuously adjustable
0°
6°
12°
0°
6°
12°
0°
6°
0 - 12, continuously adjustable
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
16.2 16.0 15.5 16.3 16.3 15.6 16.5 16.2 15.6
Gain (dBi)
Bottom
15.9 16.0 15.6 16.2 16.4 15.8 16.3 16.5 16.0
Top
16.0 16.2 15.6 16.3 16.4 15.7 16.3 16.5 15.7
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 18
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
17
15
19
18
16
19
18
15
17
17
15
18
18
15
17
17
15
Horizontal 3dB beam width (°)
69
Vertical 3dB beam width (°)
66
10.7
10.1
65
64
62
60
9.4
Bottom: 9.6
Top: 8.5
Bottom: 8.9
Top: 8.0
Bottom: 8.3
Top: 7.5
VSWR
< 1.5
Isolation between ports (dB)
Intra-system: ≥ 30
Inter-system (790 - 960 // 1710 - 2180 MHz): ≥ 40
Inter-system (1710 - 2180 // 1710 - 2180 MHz): ≥ 35
Front to back ratio, copolar (dB)
Typ. 28
Typ. 29
Typ. 26
Typ. 20
Cross polar ratio (dB)
0°
±60°
Max. power per input (W)
Typ. 10
Typ. 10
500 (at 50 ℃ ambient temperature)
300 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.5
Tracking (dB)
Avg. 2.5 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2098 x 259 x 135
Antenna net weight (kg)
19.4
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Max. operational wind speed (km/h)
Survival wind speed (km/h)
Connector
8
11
0/
18
-2 z
H
0
71 M
/1 80
60 21 X
- 9 0 - XX
0
1 D
79 17
Connector position
Frontal: 730 (at 150 km/h)
Lateral: 380 (at 150 km/h)
Rear side: 965 (at 150 km/h)
150
200
6 x 7/16 DIN Female
Bottom
DXXX-790-960/1710-2180/1710-2180-65/65/65-16i/16i/16i-M/M/M
Model: ATR451602v01
61
44
17
56
55
70
T - Top Column B - Bottom Column
790 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2180
Bottom
X
+45°
-45°
7/16 (F)
7/16 (F)
790 - 960 MHz
Unit: mm
1710 - 2180
Top
X
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2180 MHz
(Bottom)
1710 - 2180 MHz
(Top)
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
11
9
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
0
17 96
10 0/1
71
DX 218 0 XX 0M 21
Hz 80
/
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXXX-790-960/1710-2180/1710-2180-65/65/65-16.5i/16.5i/16.5i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m
Model: ATR4516R0
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
2 x (1710 - 2180)
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 12 , continuously adjustable
0°
6°
12°
0°
6°
12°
0°
6°
0 - 12 , continuously adjustable
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
16.2 16.0 15.5 16.3 16.3 15.6 16.5 16.2 15.6
Gain (dBi)
Bottom
15.9 16.0 15.6 16.2 16.4 15.8 16.3 16.5 16.0
Top
16.0 16.2 15.6 16.3 16.4 15.7 16.3 16.5 15.7
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 18
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
17
15
19
18
16
19
18
15
17
17
15
18
18
15
17
17
15
Horizontal 3dB beam width (°)
69
Vertical 3dB beam width (°)
66
10.7
10.1
65
64
62
60
9.4
Bottom: 9.6
Top: 8.5
Bottom: 8.9
Top: 8.0
Bottom: 8.3
Top: 7.5
VSWR
< 1.5
Isolation between ports (dB)
Intra-system: ≥ 30
Inter-system (790 - 960 // 1710 - 2180 MHz): ≥ 40
Inter-system (1710 - 2180 // 1710 - 2180 MHz): ≥ 35
Front to back ratio, copolar (dB)
Typ. 28
Typ. 29
Typ. 26
Typ. 20
Cross polar ratio (dB)
0°
±60°
Max. power per input (W)
Typ. 10
Typ. 10
500 (at 50℃ ambient temperature)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.5
Tracking (dB)
Avg. 2.5 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2098 x 259 x 135
Antenna net weight (kg)
20.7
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Max. operational wind speed (km/h)
Survival wind speed (km/h)
Connector
0
12
0/
18
-2 z
H
0
71 M
/1 80
60 21 X
- 9 0 - XX
0
1 D
79 17
Connector position
Frontal: 730 (at 150 km/h)
Lateral: 380 (at 150 km/h)
Rear side: 965 (at 150 km/h)
150
200
6 x 7/16 DIN Female
Bottom
DXXX-790-960/1710-2180/1710-2180-65/65/65-16.5i/16.5i/16.5i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m
Model: ATR4516R0
RET Properties
RET Type
Integrated RET
RET Protocols
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 10 (motor activated)
< 0.5 (stand by)
Adjustment time (full range) (min)
< 37 (typically, depending on antenna type)
RET Connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
DC
n/c
RS-485B
n/c
5
6
7
8
RS-485A DC in/out DC return
n/c
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about
protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
Integrated RCU S/N: a HWMxxx……r
b HWMxxx……bT
c HWMxxx…bbB
B - Bottom Column
1710 - 2180 MHz (Top)
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
12
1
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Issue: 2012-10-26
T - Top Column
1710 - 2180 MHz (Bottom)
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
Any previous catalogue issues become invalid.
b - Blue
79
0
17 96
10 0/1
71
DX 218 0 XX 0M 21
Hz 80
/
790 - 960 MHz
r - Red
DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.5i-M/M/M
Model: ATR451704v01
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
2 x (1710 - 2180)
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
0°
5°
10°
0°
5°
10°
0°
5°
0 - 10, continuously adjustable
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
16.7 16.8 16.6 16.9 17.1 16.7 17.1 17.3 17.0
Gain (dBi)
Bottom
17.0 17.1 16.6 17.6 17.6 16.8 17.4 17.6 17.0
Top
16.8 17.1 16.7 17.1 17.3 16.8 16.9 17.3 16.9
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 19
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
16
19
19
17
19
19
17
18
15
20
20
15
15
16
18
17
15
Horizontal 3dB beam width (°)
69
Vertical 3dB beam width (°)
66
8.4
8.0
65
63
62
60
7.5
Bottom: 7.5
Top: 7.0
Bottom: 7.0
Top: 6.5
Bottom: 6.6
Top: 6.1
VSWR
< 1.5
Isolation between ports (dB)
Intra-system: ≥ 30
Inter-system (790 - 960 // 1710 - 2180 MHz): ≥ 40
Inter-system (1710 - 2180 // 1710 - 2180 MHz): ≥ 40
Front to back ratio, copolar (dB)
Typ. 28
Typ. 29
Typ. 28
Typ. 20
Cross polar ratio (dB)
0°
±60°
Max. power per input (W)
Typ. 10
Typ. 10
500 (at 50 ℃ ambient temperature)
300 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.5
Tracking (dB)
Avg. 1.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2680 x 259 x 135
Antenna net weight (kg)
23
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Max. operational wind speed (km/h)
Survival wind speed (km/h)
Connector
2
12
0/
18
-2 z
H
0
71 M
/1 80
60 21 X
- 9 0 - XX
0
1 D
79 17
Connector position
Frontal: 970 (at 150 km/h)
Lateral: 500 (at 150 km/h)
Rear side: 1285 (at 150 km/h)
150
200
6 x 7/16 DIN Female
Bottom
DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.5i-M/M/M
Model: ATR451704v01
61
44
17
56
55
T - Top Column
790 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
Unit: mm
70
B - Bottom Column
1710 - 2180
Bottom
X
+45°
-45°
7/16 (F)
7/16 (F)
790 - 960 MHz
1710 - 2180
Top
X
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2180 MHz
(Bottom)
1710 - 2180 MHz
(Top)
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
3
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
12
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
0
17 96
10 0/1
71
DX 218 0 XX 0M 21
Hz 80
/
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXXX-790-960/1710-2180/1710-2180-65/65/65-16.5i/16.5i/
16.5i-M/M/M-ESLS
Model: ATR451612
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
2 x (1710 - 2180)
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 12, continuously adjustable
0°
6°
12°
0°
6°
12°
0°
6°
0 - 12, continuously adjustable
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
16.0 16.0 15.3 16.1 16.1 15.5 16.3 16.2 15.6
Gain (dBi)
Bottom
15.7 15.8 15.4 16.0 16.2 15.6 16.1 16.3 15.8
Top
15.9 16.1 15.5 16.2 16.3 15.6 16.2 16.4 15.6
Side lobe suppression (Typ.) (dB)
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
-for first side lobe above main beam
18
17
15
19
18
16
19
18
15
17
17
15
18
18
15
17
17
15
-within 0° - 15° sector above horizon
15
16
15
15
16
15
15
16
15
16
16
15
16
16
15
16
16
15
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
69
66
10.7
10.1
65
64
62
60
9.4
Bottom: 9.6
Top: 8.5
Bottom: 8.9
Top: 8.0
Bottom: 8.3
Top: 7.5
VSWR
< 1.5
Isolation between ports (dB)
Intra-system: ≥ 30
Inter-system (790 - 960 // 1710 - 2180 MHz): ≥ 40
Inter-system (1710 - 2180 // 1710 - 2180 MHz): ≥ 35
Front to back ratio, copolar (dB)
Typ. 28
Typ. 29
0°
Typ. 26
Typ. 20
±60°
Typ. 10
Typ. 10
Cross polar ratio (dB)
Max. power per input (W)
500 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
300 (at 50 ℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.5
Tracking (dB)
Avg. 2.5 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
Antenna net weight (kg)
2098 x 259 x 135
20.4
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
Wind load (N)
-55 .. +65
Frontal: 730 (at 150 km/h)
Lateral: 380 (at 150 km/h)
Rear side: 965 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
4
12
0/
18
-2 z
H
0
71 M
/1 80
60 21 X
- 9 0 - XX
0
1 D
79 17
Connector position
6 x 7/16 DIN Female
Bottom
DXXX-790-960/1710-2180/1710-2180-65/65/65-16.5i/16.5i/
16.5i-M/M/M-ESLS
Model: ATR451612
61
44
17
56
55
T - Top Column
790 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
Unit: mm
70
B - Bottom Column
1710 - 2180
Bottom
X
+45°
-45°
7/16 (F)
7/16 (F)
790 - 960 MHz
1710 - 2180
Top
X
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2180 MHz
(Bottom)
1710 - 2180 MHz
(Top)
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
12
5
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
0
17 96
10 0/1
71
DX 218 0 XX 0M 21
Hz 80
/
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/
17.5i-M/M/M-ESLS
Model: ATR451713
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
2 x (1710 - 2180)
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
0°
5°
10°
0°
5°
10°
0°
5°
0 - 10, continuously adjustable
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
16.7 16.8 16.6 16.9 17.1 16.7 17.1 17.3 17.0
Gain (dBi)
Bottom
17.0 17.0 16.6 17.6 17.4 16.8 17.4 17.4 17.0
Top
16.8 17.1 16.7 17.1 17.3 16.8 16.9 17.3 16.9
Side lobe suppression (Typ.) (dB)
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
-for first side lobe above main beam
19
16
19
19
17
19
19
17
18
15
20
20
15
15
16
18
17
15
-within 0° - 15° sector above horizon
15
16
15
15
16
15
15
16
15
16
16
15
16
16
15
16
16
15
Horizontal 3dB beam width (°)
Vertical 3dB beam width (°)
69
66
8.4
8
65
63
62
60
7.5
Bottom: 7.5
Top: 7.0
Bottom: 7.0
Top: 6.5
Bottom: 6.6
Top: 6.1
VSWR
< 1.5
Isolation between ports (dB)
Intra-system: ≥ 30
Inter-system (790 - 960 // 1710 - 2180 MHz): ≥ 40
Inter-system (1710 - 2180 // 1710 - 2180 MHz): ≥ 40
Front to back ratio, copolar (dB)
Typ. 28
Typ. 29
0°
Typ. 28
Typ. 20
±60°
Typ. 10
Typ. 10
Cross polar ratio (dB)
Max. power per input (W)
500 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
300 (at 50 ℃ ambient temperature)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.5
Tracking (dB)
Avg. 1.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
Antenna net weight (kg)
2680 x 259 x 135
24.7
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
Wind load (N)
-55 .. +65
Frontal: 970 (at 150 km/h)
Lateral: 500 (at 150 km/h)
Rear side: 1285 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
6
12
0/
18
-2 z
H
0
71 M
/1 80
60 21 X
- 9 0 - XX
0
1 D
79 17
Connector position
6 x 7/16 DIN Female
Bottom
DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/
17.5i-M/M/M-ESLS
Model: ATR451713
61
44
17
56
55
T - Top Column
790 - 960
X
+45°
-45°
7/16 (F)
7/16 (F)
Unit: mm
70
B - Bottom Column
1710 - 2180
Bottom
X
+45°
-45°
7/16 (F)
7/16 (F)
790 - 960 MHz
1710 - 2180
Top
X
+45°
-45°
7/16 (F)
7/16 (F)
1710 - 2180 MHz
(Bottom)
1710 - 2180 MHz
(Top)
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
12
7
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
0
17 96
10 0/1
71
DX 218 0 XX 0M 21
Hz 80
/
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.5i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m
Model: ATR4517R0
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
2 x (1710 - 2180)
824 - 894
880 - 960
Polarization
1710 - 1880
1850 - 1990
1920 - 2180
+45° , -45°
Electrical downtilt (°)
0 - 10 , continuously adjustable
0°
5°
10°
0°
5°
10°
0°
5°
0 - 10 , continuously adjustable
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
16.7 16.8 16.6 16.9 17.1 16.7 17.1 17.3 17.0
Gain (dBi)
Bottom
17.0 17.1 16.6 17.6 17.6 16.8 17.4 17.6 17.0
Top
16.8 17.1 16.7 17.1 17.3 16.8 16.9 17.3 16.9
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 19
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
16
19
19
17
19
19
17
18
15
20
20
15
15
16
18
17
15
Horizontal 3dB beam width (°)
69
Vertical 3dB beam width (°)
66
8.4
8.0
65
63
62
60
7.5
Bottom: 7.5
Top: 7.0
Bottom: 7.0
Top: 6.5
Bottom: 6.6
Top: 6.1
VSWR
< 1.5
Isolation between ports (dB)
Intra-system: ≥ 30
Inter-system (790 - 960 // 1710 - 2180 MHz): ≥ 40
Inter-system (1710 - 2180 // 1710 - 2180 MHz): ≥ 40
Front to back ratio, copolar (dB)
Typ. 28
Typ. 29
Typ. 28
Typ. 20
Cross polar ratio (dB)
0°
±60°
Max. power per input (W)
Typ. 10
Typ. 10
500 (at 50℃ ambient temperature)
300 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Avg. 2.5
Tracking (dB)
Avg. 1.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2680 x 259 x 135
Antenna net weight (kg)
24.6
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Max. operational wind speed (km/h)
Survival wind speed (km/h)
Connector
8
12
0/
18
-2 z
H
0
71 M
/1 80
60 21 X
- 9 0 - XX
0
1 D
79 17
Connector position
Frontal: 965 (at 150 km/h)
Lateral: 440 (at 150 km/h)
Rear side: 1200 (at 150 km/h)
150
200
6 x 7/16 DIN Female
Bottom
DXXX-790-960/1710-2180/1710-2180-65/65/65-17.5i/17.5i/17.5i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m
Model: ATR4517R0
RET Properties
RET Type
Integrated RET
RET Protocols
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 10 (motor activated)
< 0.5 (stand by)
Adjustment time (full range) (min)
< 37 (typically, depending on antenna type)
RET Connector
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
DC
n/c
RS-485B
n/c
5
6
7
8
RS-485A DC in/out DC return
n/c
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about
protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
Integrated RCU S/N: a HWMxxx……r
b HWMxxx……bT
c HWMxxx…bbB
B - Bottom Column
1710 - 2180 MHz (Top)
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
12
9
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Issue: 2012-10-26
T - Top Column
1710 - 2180 MHz (Bottom)
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
Any previous catalogue issues become invalid.
b - Blue
79
0
17 96
10 0/1
71
DX 218 0 XX 0M 21
Hz 80
/
790 - 960 MHz
r - Red
DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m
Model: ATR4518R4
Preliminary Issue
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
2 x (1710 - 2690)
824 - 894
880 - 960
Polarization
1710 - 1990
1920 - 2200
2300 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
0°
Gain (dBi)
5°
10°
0°
5°
10°
0°
0 - 10, continuously adjustable
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
15.7 15.8 15.4 15.8 15.9 15.5 15.8 16.0 15.5 17.2 17.4 17.1 17.8 18.0 17.5 17.7 17.8 17.2
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 16
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
16
15
16
16
15
16
16
15
17
17
16
17
17
16
16
16
15
Horizontal 3dB beam width (°)
66
63
60
65
62
60
Vertical 3dB beam width (°)
9.8
9.4
8.8
5.7
5.2
4.2
VSWR
< 1.5
Intra-system: ≥ 28
Inter-system: ≥ 30
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 27
Typ. 28
0°
Typ. 18
Typ. 18
±60°
Typ. 10
Typ. 10
500 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Max. power per input (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1999 x 349 x 166
Antenna net weight (kg)
25
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Frontal: 705 (at 150 km/h)
Lateral: 230 (at 150 km/h)
Rear side: 730 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
0
13
0/
69
-2 z
H
0
71 M
/1 90
60 26 X
- 9 0 - XX
0
1 D
79 17
Connector position
6 x 7/16 DIN Female
Bottom
DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.0m
Model: ATR4518R4
Preliminary Issue
RET Properties
RET Type
Integrated RET
RET Protocols*
Input voltage range (V)
Power consumption (W)
Adjustment time (full range) (min)
RET Connector
Pin assignment according AISG
1
DC
2
n/c
Lightning protection (kA)
AISG 2.0 / 3GPP
DC 10 - 30
< 10 (motor activated)
< 0.5 (stand by)
< 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
3
4
5
6
7
RS-485B
n/c
RS-485A DC in/out DC return
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
8
n/c
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about
protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
Integrated RCU S/N: a HWMxxx……bL
b - Blue
b HWMxxx……yL
y - Yellow
c HWMxxx……yyR
L - Left array
R - Right array
790 - 960 MHz
1710 - 2690 MHz (Left)
1710 - 2690 MHz (Right)
HINT
Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical
support personnel of Huawei.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
13
1
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
0
17 96
10 0/1
71
DX 269 0 XX 0M 26
Hz 90
/
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXXX-790-960/1710-2690/1710-2690-65/65/65-17i/18i/18i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m
Model: ATR4518R7
Preliminary Issue
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
2 x (1710 - 2690)
824 - 894
880 - 960
Polarization
1710 - 1990
1920 - 2200
2200 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
0°
Gain (dBi)
5°
10°
0°
5°
10°
0°
0 - 10, continuously adjustable
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
16.3 16.4 16.2 16.7 16.8 16.4 16.9 17.0 16.6 17.2 17.4 17.1 17.8 18.0 17.5 17.7 17.8 17.2
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 17
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
16
16
17
16
16
17
16
16
17
17
16
17
17
16
16
16
15
Horizontal 3dB beam width (°)
67
65
64
66
62
60
Vertical 3dB beam width (°)
7.9
7.5
7.0
5.7
5.2
4.2
VSWR
< 1.5
Intra-system: ≥ 28
Inter-system: ≥ 30
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 27
Typ. 28
0°
Typ. 18
Typ. 18
±60°
Typ. 10
Typ. 10
500 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Max. power per input (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2528 x 349 x 166
Antenna net weight (kg)
27.3
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Frontal: 920 (at 150 km/h)
Lateral: 305 (at 150 km/h)
Rear side: 955 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
2
13
0/
69
-2 z
H
0
71 M
/1 90
60 26 X
- 9 0 - XX
0
1 D
79 17
Connector position
6 x 7/16 DIN Female
Bottom
DXXX-790-960/1710-2690/1710-2690-65/65/65-17i/18i/18i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 2.6m
Model: ATR4518R7
Preliminary Issue
RET Properties
RET Type
Integrated RET
RET Protocols*
Input voltage range (V)
Power consumption (W)
Adjustment time (full range) (min)
RET Connector
Pin assignment according AISG
1
DC
2
n/c
Lightning protection (kA)
AISG 2.0 / 3GPP
DC 10 - 30
< 10 (motor activated)
< 0.5 (stand by)
< 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
3
4
5
6
7
RS-485B
n/c
RS-485A DC in/out DC return
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
8
n/c
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about
protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
Integrated RCU S/N: a HWMxxx……bL
b - Blue
b HWMxxx……yL
y - Yellow
c HWMxxx……yyR
L - Left array
R - Right array
790 - 960 MHz
1710 - 2690 MHz (Left)
1710 - 2690 MHz (Right)
HINT
Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical
support personnel of Huawei.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
13
3
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
79
0
17 96
10 0/1
71
DX 269 0 XX 0M 26
Hz 90
/
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXXX-790-960/1710-2690/1710-2690-65/65/65-15i/17.5i/17.5i-M/M/M
Model: ATR451709
Preliminary Issue
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
824 - 894
2 x (1710 - 2690)
880 - 960
Polarization
1920 - 2200
2300 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 14, continuously adjustable
0°
Gain (dBi)
7°
14°
0°
7°
14°
0°
0 - 10, continuously adjustable
7°
14°
0°
5°
10°
0°
5°
10°
0°
5°
10°
14.2 14.0 13.6 14.4 14.2 13.8 14.6 14.4 14.0 16.7 16.9 16.5 17.3 17.5 17.0 17.2 17.4 16.7
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 16
7°
14°
0°
16
15
16
Horizontal 3dB beam width (°)
66
63
60
Vertical 3dB beam width (°)
7°
14°
0°
16
15
16
7°
14°
0°
16
15
16
15.8
15
14
VSWR
5°
10°
0°
16
15
16
5°
10°
0°
5°
10°
16
15
16
16
15
65
62
60
6.3
5.0
4.4
< 1.5
Intra-system: ≥ 28
Inter-system: ≥ 30
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
1710 - 1990
0°
±60°
Max. power per input (W)
Typ. 27
Typ. 28
Typ. 18
Typ. 18
Typ. 10
Typ. 10
500 (at 50 ℃ ambient temperature)
250 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
Antenna net weight (kg)
1472 x 349 x 166
18
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
Wind load (N)
Max. operational wind speed (km/h)
Survival wind speed (km/h)
Connector
Connector position
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
4
13
0/
69
-2 z
H
0
71 M
/1 90
60 26 X
- 9 0 - XX
0
1 D
79 17
Issue: 2013-01-08
-55 .. +65
Frontal: 495 (at 150 km/h)
Lateral: 160 (at 150 km/h)
Rear side: 525 (at 150 km/h)
150
200
6 x 7/16 DIN Female
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DXXX-790-960/1710-2690/1710-2690-65/65/65-16i/18i/18i-M/M/M
Model: ATR451606
Preliminary Issue
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
824 - 894
2 x (1710 - 2690)
880 - 960
Polarization
1920 - 2200
2300 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
0°
Gain (dBi)
5°
10°
0°
5°
10°
0°
0 - 10, continuously adjustable
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
15.7 15.8 15.4 15.8 15.9 15.5 15.8 16.0 15.5 17.2 17.4 17.1 17.8 18.0 17.5 17.7 17.8 17.2
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 16
5°
10°
0°
16
15
16
Horizontal 3dB beam width (°)
66
63
60
Vertical 3dB beam width (°)
5°
10°
0°
16
15
16
5°
10°
0°
16
15
17
9.8
9.4
8.8
VSWR
5°
10°
0°
17
16
17
5°
10°
0°
5°
10°
17
16
16
16
15
65
62
60
5.7
5.2
4.2
< 1.5
Intra-system: ≥ 28
Inter-system: ≥ 30
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
1710 - 1990
0°
±60°
Max. power per input (W)
Typ. 27
Typ. 28
Typ. 18
Typ. 18
Typ. 10
Typ. 10
500 (at 50 ℃ ambient temperature)
250 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
1999 x 349 x 166
23
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
Wind load (N)
Max. operational wind speed (km/h)
Survival wind speed (km/h)
Connector
Connector position
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
-55 .. +65
Frontal: 705 (at 150 km/h)
Lateral: 230 (at 150 km/h)
Rear side: 745 (at 150 km/h)
150
200
6 x 7/16 DIN Female
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
13
5
Antenna net weight (kg)
79
0
17 96
10 0/1
71
DX 269 0 XX 0M 26
Hz 90
/
Antenna dimensions (H x W x D) (mm)
DXXX-790-960/1710-2690/1710-2690-65/65/65-17i/18i/18i-M/M/M
Model: ATR451607
Preliminary Issue
Electrical Properties
790 - 960
Frequency range (MHz)
790 - 862
824 - 894
2 x (1710 - 2690)
880 - 960
Polarization
1920 - 2200
2300 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
0°
Gain (dBi)
5°
10°
0°
5°
10°
0°
0 - 10, continuously adjustable
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
16.3 16.4 16.2 16.7 16.8 16.4 16.9 17.0 16.6 17.2 17.4 17.1 17.8 18.0 17.5 17.7 17.8 17.2
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 17
5°
10°
0°
16
16
17
Horizontal 3dB beam width (°)
67
65
64
Vertical 3dB beam width (°)
5°
10°
0°
16
16
17
5°
10°
0°
16
16
17
7.9
7.5
7.0
VSWR
5°
10°
0°
17
16
17
5°
10°
0°
5°
10°
17
16
16
16
15
66
62
60
5.7
5.2
4.2
< 1.5
Intra-system: ≥ 28
Inter-system: ≥ 30
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
1710 - 1990
0°
±60°
Max. power per input (W)
Typ. 27
Typ. 28
Typ. 18
Typ. 18
Typ. 10
Typ. 10
500 (at 50 ℃ ambient temperature)
250 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
Antenna net weight (kg)
2593 x 349 x 166
28
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
Wind load (N)
Max. operational wind speed (km/h)
Survival wind speed (km/h)
Connector
Connector position
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
6
13
0/
69
-2 z
H
0
71 M
/1 90
60 26 X
- 9 0 - XX
0
1 D
79 17
Issue: 2013-01-08
-55 .. +65
Frontal: 950 (at 150 km/h)
Lateral: 315 (at 150 km/h)
Rear side: 985 (at 150 km/h)
150
200
6 x 7/16 DIN Female
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DXXX-698-960/1710-2690/1710-2690-65/65/65-17i/17.5i/
17.5i-M/M/M-B\R
Model: ATR4518R9
Preliminary Issue
Electrical Properties
698 - 960
Frequency range (MHz)
698 - 806
790 - 894
2 x (1710 - 2690)
880 - 960
Polarization
1710 - 1990
1920 - 2170
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
0°
Gain (dBi)
5°
10°
0°
5°
10°
0°
0 - 8, continuously adjustable
5°
10° 0°
4°
8°
0°
4°
8°
0°
4°
8°
16.2 16.4 16.1 16.6 16.8 16.4 17.1 17.2 16.8 17.4 17.6 17.4 18.3 18.3 18.0 18.2 18.3 18.0
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 17
5°
10°
0°
5°
10°
0°
5°
10° 0°
4°
8°
0°
4°
8°
0°
4°
8°
16
16
17
16
16
17
16
16
17
16
17
17
16
16
16
15
Horizontal 3dB beam width (°)
66
63
60
68
63
60
Vertical 3dB beam width (°)
8.3
7.6
7.1
5.2
4.8
4.0
VSWR
< 1.5
Intra-system: ≥ 28
Inter-system: ≥ 30
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
17
Typ. 28
Typ. 27
0°
Typ. 18
Typ. 17
±60°
Typ. 10
Typ. 10
500 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Max. power per input (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Grounding
50
DC Ground
Mechanical Properties
2685 x 349 x 148
Antenna net weight (kg)
37
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal: 1215 (at 150 km/h)
Lateral: 445 (at 150 km/h)
Rear side: 1555 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
RET Type
RET Protocols
6 x 7/16 DIN Female
Bottom
Internal motor, Internal Smart Bias-T
AISG 1.1 / AISG 2.0
13
7
Wind load (N)
69
8
17 96
10 0/1
71
DX 269 0 XX 0M 26
Hz 90
/
Antenna dimensions (H x W x D) (mm)
DXXX-698-960/1710-2690/1710-2690-65/65/65-17i/17.5i/
17.5i-M/M/M-B\R
Model: ATR4518R9
Preliminary Issue
RET Properties
RET Type
Internal motor, Internal smart Bias-T
RET Protocols
AISG 1.1 / AISG 2.0
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 11 (motor activated)
< 1 (stand by)
Adjustment time (full range) (min)
< 1.5 (typically, depending on antenna type)
Calibration time (min)
< 3 (typically, depending on antenna type)
Internal Bias-T from +45° port (698 MHz - 960 MHz)
(2.176MHz modulated data)
Smart Bias-T port
3 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
Standards:
y EN 60950-1 (Safety)
Certification:
CE, FCC, RoHS, WEEE
y EN 55022 (Emission)
y EN 55024 (Immunity)
y ETSI EN300386 (1.4.1)
y FCC part15
HINT
Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical
support personnel of Huawei.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
8
13
0/
69
-2 z
H
0
71 M
/1 90
60 26 X
- 9 0 - XX
8
1 D
69 17
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DXXX-1710-2690/1710-2170/2490-2690-65/65/65-18i/18i/18i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m
Model: ATR4518R3
Preliminary Issue
Electrical Properties
1710 - 2690
Frequency range (MHz)
1710 - 1990
1710 - 2170
1920 - 2200
2300 - 2690
Polarization
1710 - 1990
1920 - 2170
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12, continuously adjustable
0°
Gain (dBi)
6°
12°
0°
6°
12°
0°
0 - 12, continuously adjustable
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
17.3 17.4 17.2 17.6 17.8 17.5 17.8 18.0 17.3 17.0 17.1 16.9 17.3 17.6 17.2 17.4 17.6 16.9
Side lobe suppression (Typ.) (dB)
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
-for first side lobe above main beam
18
17
16
18
17
16
18
17
16
17
16
15
17
16
15
17
16
15
-within 0° - 15° sector above horizon
16
16
15
16
16
15
15
16
15
16
16
15
16
16
15
15
16
15
Horizontal 3dB beam width (°)
66
63
60
66
63
60
Vertical 3dB beam width (°)
6.5
6.0
4.8
6.5
6.0
4.8
VSWR
< 1.5
Intra-system: ≥ 30
Inter-system: ≥ 30
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 28
0°
Typ. 18
±60°
Typ. 10
Max. power per input (W)
250 (at 50 ℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
1445 x 299 x 109
Antenna net weight (kg)
15.8
Bracket weight (kg)
4.6
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Frontal: 520 (at 150 km/h)
Lateral: 105 (at 150 km/h)
Rear side: 600 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
6 x 7/16 DIN Female
Bottom
13
9
Wind load (N)
17
10
24 26
90 90
- /17
DX 269 10
XX 0M - 2
Hz 17
0/
Antenna dimensions (H x W x D) (mm)
DXXX-1710-2690/1710-2170/2490-2690-65/65/65-18i/18i/18i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m
Model: ATR4518R3
Preliminary Issue
RET Properties
RET Type
Integrated RET
RET Protocols*
Input voltage range (V)
Power consumption (W)
Adjustment time (full range) (min)
RET Connector
Pin assignment according AISG
1
DC
2
n/c
Lightning protection (kA)
AISG 2.0 / 3GPP
DC 10 - 30
< 10 (motor activated)
< 0.5 (stand by)
< 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
3
4
5
6
7
RS-485B
n/c
RS-485A DC in/out DC return
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
8
n/c
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about
protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
Integrated RCU S/N: a HWMxxx……bL
b - Blue
b HWMxxx……yL
y - Yellow
c HWMxxx……yyR
L - Left array
R - Right array
1710 - 2690 MHz
1710 - 2170 MHz
2490 - 2690 MHz
HINT
Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical
support personnel of Huawei.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
0/
17
-2 z
10 H
17 M
0/ 90
69 26 X
- 2 0 - XX
10 249 D
17
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
0
14
DXXX-1710-2690/1710-2690/1710-2690-65/65/
65-18i/18i/18i-M/M/M
Model: ATR451714
Preliminary Issue
Electrical Properties
3 x (1710 - 2690)
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 12, continuously adjustable
Gain (dBi)
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
17.3
17.4
17.2
17.6
17.8
17.5
17.7
18.0
17.5
17.8
18.0
17.3
Side lobe suppression (Typ.) (dB)
0°
6°
12°
0°
6°
12°
0°
6°
12°
0°
6°
12°
-for first side lobe above main beam
17
17
16
17
17
16
17
17
16
17
17
16
-within 0° - 15° sector above horizon
16
16
15
16
16
15
16
16
15
15
16
15
Horizontal 3dB beam width (°)
65
63
Vertical 3dB beam width (°)
6.5
6.2
VSWR
60
5.2
4.7
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 28
Cross polar ratio (dB)
60
0°
Typ. 18
±60°
Typ. 10
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
1445 x 449 x 115
20
Bracket weight (kg)
4.8
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Wind load (N)
Frontal: 750 (at 150 km/h)
Lateral: 85 (at 150 km/h)
Rear side: 835 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
6 x 7/16 DIN Female
Bottom
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
14
1
Antenna net weight (kg)
17
10
17 26
10 90
- /17
DX 269 10
XX 0M - 2
Hz 69
0/
Antenna dimensions (H x W x D) (mm)
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/
65-16i/18i/18i/18i-M/M/M/M-R
EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.0m
Model: AQU4518R0
Preliminary Issue
Electrical Properties
Frequency range (MHz)
790 - 960
790 - 894
1710 - 2690
880 - 960
1710 - 1990
1710 - 2170
1920 - 2200
Polarization
2300 - 2690
1710 - 1990
1920 - 2170
2490 - 2690
+45° , -45°
0 - 10, continuously
adjustable
Electrical downtilt (°)
0°
Gain (dBi)
5°
10°
0°
5°
0 - 10, continuously adjustable
10°
0°
5°
10°
0°
5°
10°
0°
5°
0 - 10, continuously adjustable
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
15.7 15.8 15.4 15.8 16.0 15.5 17.2 17.4 17.1 17.8 18.0 17.5 17.7 17.8 17.2 17.2 17.4 17.0 17.7 17.9 17.4 17.5 17.6 17.0
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 17
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
16
16
17
16
16
17
17
16
17
17
16
16
16
15
17
16
16
17
16
16
16
16
15
Horizontal 3dB beam width (°)
65
64
66
63
60
66
63
60
Vertical 3dB beam width (°)
9.6
8.8
5.7
5.2
4.2
5.7
5.2
4.2
VSWR
< 1.5
Intra-system: ≥ 28
Inter-system: ≥ 30
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 27
Typ. 28
Typ. 28
Typ. 28
0°
Typ. 18
Typ. 18
Typ. 18
Typ. 18
±60°
Typ. 10
Typ. 10
Typ. 10
Typ. 10
500 (at 50 ℃ ambient
temperature)
250 (at 50 ℃ ambient temperature)
Max. power per input (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
1999 x 349 x 166
Antenna net weight (kg)
27.5
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0 - 12
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Frontal: 705 (at 150 km/h)
Lateral: 230 (at 150 km/h)
Rear side: 730 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
2
14
0/ Hz
69 M
- 2 90
0 26
71 /1 90
60 24 X
- 9 0/ XX
0 17 DX
79 - 2
10
17
Connector position
8 x 7/16 DIN Female
Bottom
250 (at 50℃ ambient temperature)
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/
65-16i/18i/18i/18i-M/M/M/M-R
EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.0m
Model: AQU4518R0
Preliminary Issue
RET Properties
RET Type
Integrated RET
RET Protocols*
Input voltage range (V)
Power consumption (W)
Adjustment time (full range) (min)
RET Connector
Pin assignment according AISG
1
DC
2
n/c
Lightning protection (kA)
AISG 2.0 / 3GPP
DC 10 - 30
< 10 (motor activated)
< 0.5 (stand by)
< 50 (typically, depending on antenna type)
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
3
4
5
6
7
RS-485B
n/c
RS-485A DC in/out DC return
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
8
n/c
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about
protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
Integrated RCU S/N: a HWMxxx……r
r - Red
b HWMxxx……rr
b - Blue
c HWMxxx……r
y - Yellow
d HWMxxx……r
L - Left array
R - Right array
790 - 960 MHz
1710 - 2690 MHz
1710 - 2170 MHz
2490 - 2690 MHz
HINT
Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical
support personnel of Huawei.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
14
3
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17 79
10 0
- 2 - 96
17 0/
0/ 17
DX 249 10
XX 0 - - 26
X 26 90
90 /
M
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/
65-17i/18i/18i/18i-M/M/M/M-R
EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.6m
Model: AQU4518R1
Preliminary Issue
Electrical Properties
Frequency range (MHz)
790 - 960
790 - 894
1710 - 2690
880 - 960
1710 - 1990
1710 - 2170
1920 - 2200
Polarization
2300 - 2690
1710 - 1990
1920 - 2170
2490 - 2690
+45° , -45°
0 - 10, continuously
adjustable
Electrical downtilt (°)
0°
Gain (dBi)
5°
10°
0°
5°
0 - 10, continuously adjustable
10°
0°
5°
10°
0°
5°
10°
0°
5°
0 - 10, continuously adjustable
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
16.7 16.6 16.3 16.9 17.0 16.6 17.2 17.4 17.1 17.8 18.0 17.5 17.7 17.7 17.2 17.2 17.2 17.0 17.7 17.9 17.4 17.5 17.6 17.0
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 17
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
16
16
17
16
16
17
17
16
17
17
16
16
16
15
17
16
16
17
16
16
16
16
15
Horizontal 3dB beam width (°)
65
64
66
63
60
66
63
60
Vertical 3dB beam width (°)
8.2
7.3
5.7
5.2
4.2
5.7
5.2
4.2
VSWR
< 1.5
Intra-system: ≥ 28
Inter-system: ≥ 30
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 27
Typ. 28
Typ. 28
Typ. 28
0°
Typ. 18
Typ. 18
Typ. 18
Typ. 18
±60°
Typ. 10
Typ. 10
Typ. 10
Typ. 10
500 (at 50 ℃ ambient
temperature)
250 (at 50℃ ambient temperature)
Max. power per input (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Grounding
250 (at 50℃ ambient temperature)
50
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2593 x 349 x 166
Antenna net weight (kg)
39
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Frontal: 950 (at 150 km/h)
Lateral: 315 (at 150 km/h)
Rear side: 985 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
4
14
0/ Hz
69 M
- 2 90
0 26
71 /1 90
60 24 X
- 9 0/ XX
0 17 DX
79 - 2
10
17
Connector position
8 x 7/16 DIN Female
Bottom
DXXXX-790-960/1710-2690/1710-2170/2490-2690-65/65/65/
65-17i/18i/18i/18i-M/M/M/M-R
EasyRET Quad-Band Antenna with 4 Integrated RCUs - 2.6m
Model: AQU4518R1
Preliminary Issue
RET Properties
RET Type
Integrated RET
RET Protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 10 (motor activated)
< 0.5 (stand by)
Adjustment time (full range) (min)
< 50 (typically, depending on antenna type)
RET Connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
DC
n/c
RS-485B
n/c
Lightning protection (kA)
5
6
7
8
RS-485A DC in/out DC return
n/c
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about
protocol switching function, contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
HINT
Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical
support personnel of Huawei.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
14
5
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17 79
10 0
- 2 - 96
17 0/
0/ 17
DX 249 10
XX 0 - - 26
X 26 90
90 /
M
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DXXXXX-698-960/1710-2690/1710-2690/1710-2690/1710-2690-65/
65/65/65/65-17i/17.5i/17.5i/17i/17i-M/M/M/M/M-B\R
Model: APE4517R2
Preliminary Issue
Electrical Properties
698 - 960
Frequency range (MHz)
698 - 806
824 - 894
4 x (1710 - 2690)
880 - 960
Polarization
1920 - 2170
2490 - 2690
+45° , -45°
Electrical downtilt (°)
0 - 10, continuously adjustable
0°
Gain (dBi)
1710 - 1990
5°
10°
0°
5°
10°
0°
0 - 10, continuously adjustable
5°
10° 0°
5°
10° 0°
5°
10°
0°
5°
10°
16.1 16.3 16.0 16.6 16.8 16.4 17.0 17.1 16.5
Bottom
16.2 16.3 16.0 16.8 17.1 16.4 16.5 16.8 16.2
Top
15.9 16.1 15.7 16.4 16.9 16.0 16.2 16.4 15.8
Side lobe suppression for first side 0°
lobe above main beam (Typ.) (dB) 17
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
0°
5°
10°
16
16
17
16
16
17
16
16
17
17
16
17
17
16
16
16
15
Horizontal 3dB beam width (°)
67
64
62
68
63
60
Vertical 3dB beam width (°)
8.4
8.0
7.4
7.0
6.1
5.4
VSWR
< 1.5
Intra-system: ≥ 28
Inter-system: ≥ 30
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Typ. 28
Typ. 27
0°
Typ. 18
Typ. 18
±60°
Typ. 10
Typ. 10
500 (at 50℃ ambient temperature)
250 (at 50℃ ambient temperature)
Max. power per input (W)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
Grounding
50
DC Ground
Mechanical Properties
Antenna dimensions (H x W x D) (mm)
2695 x 349 x 166
Antenna net weight (kg)
39
Bracket weight (kg)
5.6
Mechanical downtilt (°)
0-8
Mast diameter (mm)
50 - 115
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
Wind load (N)
Max. operational wind speed (km/h)
Survival wind speed (km/h)
Connector
Connector position
0/
69
-2 z
10 MH
17 0
0/ 69
69 - 2
- 2 10 X
0
7
71 /1 XX
/1 90 X
60 26 DX
-9 08
1
69 17
RET Type
RET Protocols
Frontal: 1000 (at 150 km/h)
Lateral: 450 (at 150 km/h)
Rear side: 970 (at 150 km/h)
150
200
10 x 7/16 DIN Female
Bottom
Internal motor, Internal Smart Bias-T
AISG 1.1 / AISG 2.0
6
14
DXXXXX-698-960/1710-2690/1710-2690/1710-2690/1710-2690-65/
65/65/65/65-17i/17.5i/17.5i/17i/17i-M/M/M/M/M-B\R
Model: APE4517R2
Preliminary Issue
RET Properties
RET Type
Internal motor, Internal smart Bias-T
RET Protocols
AISG 1.1 / AISG 2.0
Input voltage range (V)
DC 10 - 30
Power consumption (W)
< 11 (motor activated)
< 1 (stand by)
Adjustment time (full range) (min)
< 1.5 (typically, depending on antenna type)
Calibration time (min)
< 3 (typically, depending on antenna type)
Internal Bias-T from +45° port (698 MHz - 960 MHz)
(2.176MHz modulated data)
Smart Bias-T port
3 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
Standards:
y EN 60950-1 (Safety)
Certification:
CE, FCC, RoHS, WEEE
y EN 55022 (Emission)
y EN 55024 (Immunity)
y ETSI EN300386 (1.4.1)
y FCC part15
HINT
Before the installation, check whether the antenna and base station support the same AISG protocol. If not, contact the technical
support personnel of Huawei.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
14
7
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
69
8
17 96
10 0/1
- 2 71
69 0 0
2
DX /17 690
XX 10 /17
XX - 26 10
90 - 2
M 69
Hz 0
/
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DX4-1880-2690-90-16i-0F
Model: ATD451600
Preliminary Issue
Electrical Properties
Frequency range (MHz)
General
parameters
Calibration
and electrical
parameters
2010 - 2025 (A)
2500 - 2690 (D)
+45° , -45°
Electrical downtilt (°)
0
0
0
Electrical downtilt tolerance (°)
±1
±1
±1
Coupling factor between calibration port and each
antenna port (dB)
-26 ±2
-26 ±2
-26 ±2
Max. amplitude tolerance from calibration port to
input ports (dB)
< 0.7
< 0.7
< 0.7
Max. phase tolerance from calibration port to input
ports (°)
<5
<5
<5
Ports VSWR
< 1.5
< 1.5
< 1.5
Co-polarization isolation between ports (dB)
≥ 20
Cross-polarization isolation between ports (dB)
≥ 25
Single
column
beam
Horizontal 3dB beam width (°)
100 ±15
90 ±15
65 ±10
Gain (dBi)
≥ 14.0
≥ 15.0
≥ 16.5
Vertical 3dB beam width (°)
/
/
≥5
Cross polar ratio (0°) (dB)
≥ 17
≥ 17
≥ 16
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 23
≥ 23
≥ 25
/
/
≤ -16
Horizontal 3dB beam width (°)
65 ±5
65 ±5
65 ±5
Gain (dBi)
≥ 14.0
≥ 14.5
≥ 15.2
Gain roll-off at sector edge (dB)
12 ±2
12 ±2
12 ±2
Vertical 3dB beam width (°)
≥ 7.0
≥ 6.5
≥ 5.0
Cross polar ratio (0°) (dB)
≥ 18
≥ 18
≥ 18
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
≤ -16
≤ -16
≤ -16
Null fill at first null point below main
beam (dB)
Typ. -18
Typ. -18
Typ. -18
0° direct beam gain (dBi)
≥ 20.0
≥ 20.5
≥ 22.0
0° direct beam horizontal 3dB beam
width (°)
≤ 29
≤ 26
≤ 21
0° direct beam side lobe suppression (dB)
≤ -12
≤ -12
≤ -12
±60° direct beam gain (dBi)
≥ 17.5
≥ 17.5
≥ 19.5
±60° direct beam horizontal 3dB
beam width (°)
≤ 35
≤ 32
≤ 25
±60° direct beam horizontal side
lobe suppression (dB)
≤ -5
≤ -5
≤ -4
0° direct beam cross polar ratio (0°) (dB)
≥ 20
≥ 20
≥ 20
0° direct beam front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
Radiation
parameters
1880 - 1920 (F)
Polarization
65°
Broadcast
beam
Service
beam
80
18
Hz
0M
69
- 2 X4
D
8
14
DX4-1880-2690-90-16i-0F
Model: ATD451600
Preliminary Issue
Electrical Properties
Distance between columns (mm)
1396 x 319 x 116
Antenna net weight (kg)
13.0
Bracket weight (kg)
4.6
Mechanical downtilt (°)
-5 - 10
Mast diameter (mm)
50 - 115
Radome material
UPVC
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 620 (at 150 km/h)
Lateral: 160 (at 150 km/h)
Rear side: 680 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
9 x N Female
Bottom
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
14
9
Connector position
-2
DX 69
4 0M
Connector
80
Wind load (N)
18
Antenna dimensions (H x W x D) (mm)
75
DX4-1880-2690-90-16i-3F
Model: ATD451601
Preliminary Issue
Electrical Properties
Frequency range (MHz)
General
parameters
Calibration
and electrical
parameters
2010 - 2025 (A)
2500 - 2690 (D)
+45° , -45°
Electrical downtilt (°)
3
3
3
Electrical downtilt tolerance (°)
±1
±1
±1
Coupling factor between calibration port and each
antenna port (dB)
-26 ±2
-26 ±2
-26 ±2
Max. amplitude tolerance from calibration port to
input ports (dB)
< 0.7
< 0.7
< 0.7
Max. phase tolerance from calibration port to input
ports (°)
<5
<5
<5
Ports VSWR
< 1.5
< 1.5
< 1.5
Co-polarization isolation between ports (dB)
≥ 25
Cross-polarization isolation between ports (dB)
≥ 28
Single
column
beam
Horizontal 3dB beam width (°)
100 ±15
90 ±15
65 ±10
Gain (dBi)
≥ 14.0
≥ 15.0
≥ 16.5
Vertical 3dB beam width (°)
/
/
≥5
Cross polar ratio (0°) (dB)
≥ 17
≥ 17
≥ 16
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 23
≥ 23
≥ 25
/
/
≤ -16
Horizontal 3dB beam width (°)
65 ±5
65 ±5
65 ±5
Gain (dBi)
≥ 14.0
≥ 14.5
≥ 15.2
Gain roll-off at sector edge (dB)
12 ±2
12 ±2
12 ±2
Vertical 3dB beam width (°)
≥ 7.0
≥ 6.5
≥ 5.0
Cross polar ratio (0°) (dB)
≥ 18
≥ 18
≥ 18
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
≤ -16
≤ -16
≤ -16
Null fill at first null point below main
beam (dB)
Typ. -18
Typ. -18
Typ. -18
0° direct beam gain (dBi)
≥ 20.0
≥ 20.5
≥ 22.0
0° direct beam horizontal 3dB beam
width (°)
≤ 29
≤ 26
≤ 21
0° direct beam side lobe suppression (dB)
≤ -12
≤ -12
≤ -12
±60° direct beam gain (dBi)
≥ 17.5
≥ 17.5
≥ 19.5
±60° direct beam horizontal 3dB
beam width (°)
≤ 35
≤ 32
≤ 25
±60° direct beam horizontal side
lobe suppression (dB)
≤ -5
≤ -5
≤ -4
0° direct beam cross polar ratio (0°) (dB)
≥ 20
≥ 20
≥ 20
0° direct beam front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
Radiation
parameters
1880 - 1920 (F)
Polarization
65°
Broadcast
beam
Service
beam
80
18
Hz
0M
69
- 2 X4
D
0
15
DX4-1880-2690-90-16i-3F
Model: ATD451601
Preliminary Issue
Electrical Properties
Distance between columns (mm)
1396 x 319 x 116
Antenna net weight (kg)
13.0
Bracket weight (kg)
4.6
Mechanical downtilt (°)
-5 - 10
Mast diameter (mm)
50 - 115
Radome material
UPVC
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 620 (at 150 km/h)
Lateral: 160 (at 150 km/h)
Rear side: 680 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
9 x N Female
Bottom
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
15
1
Connector position
-2
DX 69
4 0M
Connector
80
Wind load (N)
18
Antenna dimensions (H x W x D) (mm)
75
DX4-1880-2690-90-16i-6F
Model: ATD451602
Preliminary Issue
Electrical Properties
Frequency range (MHz)
General
parameters
Calibration
and electrical
parameters
2010 - 2025 (A)
2500 - 2690 (D)
+45° , -45°
Electrical downtilt (°)
6
6
6
Electrical downtilt tolerance (°)
±1
±1
±1
Coupling factor between calibration port and each
antenna port (dB)
-26 ±2
-26 ±2
-26 ±2
Max. amplitude tolerance from calibration port to
input ports (dB)
< 0.7
< 0.7
< 0.7
Max. phase tolerance from calibration port to input
ports (°)
<5
<5
<5
Ports VSWR
< 1.5
< 1.5
< 1.5
Co-polarization isolation between ports (dB)
≥ 28
Cross-polarization isolation between ports (dB)
≥ 30
Single
column
beam
Horizontal 3dB beam width (°)
100 ±15
90 ±15
65 ±10
Gain (dBi)
≥ 14.0
≥ 15.0
≥ 16.5
Vertical 3dB beam width (°)
/
/
≥5
Cross polar ratio (0°) (dB)
≥ 17
≥ 17
≥ 16
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 23
≥ 23
≥ 25
/
/
≤ -16
Horizontal 3dB beam width (°)
65 ±5
65 ±5
65 ±5
Gain (dBi)
≥ 14.0
≥ 14.5
≥ 15.2
Gain roll-off at sector edge (dB)
12 ±2
12 ±2
12 ±2
Vertical 3dB beam width (°)
≥ 7.0
≥ 6.5
≥ 5.0
Cross polar ratio (0°) (dB)
≥ 18
≥ 18
≥ 18
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
≤ -16
≤ -16
≤ -16
Null fill at first null point below main
beam (dB)
Typ. -18
Typ. -18
Typ. -18
0° direct beam gain (dBi)
≥ 20.0
≥ 20.5
≥ 22.0
0° direct beam horizontal 3dB beam
width (°)
≤ 29
≤ 26
≤ 21
0° direct beam side lobe suppression (dB)
≤ -12
≤ -12
≤ -12
±60° direct beam gain (dBi)
≥ 17.5
≥ 17.5
≥ 19.5
±60° direct beam horizontal 3dB
beam width (°)
≤ 35
≤ 32
≤ 25
±60° direct beam horizontal side
lobe suppression (dB)
≤ -5
≤ -5
≤ -4
0° direct beam cross polar ratio (0°) (dB)
≥ 20
≥ 20
≥ 20
0° direct beam front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
Radiation
parameters
1880 - 1920 (F)
Polarization
65°
Broadcast
beam
Service
beam
80
18
Hz
0M
69
- 2 X4
D
2
15
DX4-1880-2690-90-16i-6F
Model: ATD451602
Preliminary Issue
Electrical Properties
Distance between columns (mm)
1396 x 319 x 116
Antenna net weight (kg)
13.0
Bracket weight (kg)
4.6
Mechanical downtilt (°)
-5 - 10
Mast diameter (mm)
50 - 115
Radome material
UPVC
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 620 (at 150 km/h)
Lateral: 160 (at 150 km/h)
Rear side: 680 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
9 x N Female
Bottom
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
15
3
Connector position
-2
DX 69
4 0M
Connector
80
Wind load (N)
18
Antenna dimensions (H x W x D) (mm)
75
DX4-1880-2690-90-16i-9F
Model: ATD451603
Preliminary Issue
Electrical Properties
Frequency range (MHz)
General
parameters
Calibration
and electrical
parameters
2010 - 2025 (A)
2500 - 2690 (D)
+45° , -45°
Electrical downtilt (°)
9
9
9
Electrical downtilt tolerance (°)
±1
±1
±1
Coupling factor between calibration port and each
antenna port (dB)
-26 ±2
-26 ±2
-26 ±2
Max. amplitude tolerance from calibration port to
input ports (dB)
< 0.7
< 0.7
< 0.7
Max. phase tolerance from calibration port to input
ports (°)
<5
<5
<5
Ports VSWR
< 1.5
< 1.5
< 1.5
Co-polarization isolation between ports (dB)
≥ 28
Cross-polarization isolation between ports (dB)
≥ 30
Single
column
beam
Horizontal 3dB beam width (°)
100 ±15
90 ±15
65 ±10
Gain (dBi)
≥ 14.0
≥ 15.0
≥ 16.5
Vertical 3dB beam width (°)
/
/
≥5
Cross polar ratio (0°) (dB)
≥ 17
≥ 17
≥ 16
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 23
≥ 23
≥ 25
/
/
≤ -16
Horizontal 3dB beam width (°)
65 ±5
65 ±5
65 ±5
Gain (dBi)
≥ 14.0
≥ 14.5
≥ 15.2
Gain roll-off at sector edge (dB)
12 ±2
12 ±2
12 ±2
Vertical 3dB beam width (°)
≥ 7.0
≥ 6.5
≥ 5.0
Cross polar ratio (0°) (dB)
≥ 18
≥ 18
≥ 18
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
≤ -16
≤ -16
≤ -16
Null fill at first null point below main
beam (dB)
Typ. -18
Typ. -18
Typ. -18
0° direct beam gain (dBi)
≥ 20.0
≥ 20.5
≥ 22.0
0° direct beam horizontal 3dB beam
width (°)
≤ 29
≤ 26
≤ 21
0° direct beam side lobe suppression (dB)
≤ -12
≤ -12
≤ -12
±60° direct beam gain (dBi)
≥ 17.5
≥ 17.5
≥ 19.5
±60° direct beam horizontal 3dB
beam width (°)
≤ 35
≤ 32
≤ 25
±60° direct beam horizontal side
lobe suppression (dB)
≤ -5
≤ -5
≤ -4
0° direct beam cross polar ratio (0°) (dB)
≥ 20
≥ 20
≥ 20
0° direct beam front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
Radiation
parameters
1880 - 1920 (F)
Polarization
65°
Broadcast
beam
Service
beam
80
18
Hz
0M
69
- 2 X4
D
4
15
DX4-1880-2690-90-16i-9F
Model: ATD451603
Preliminary Issue
Electrical Properties
Distance between columns (mm)
1396 x 319 x 116
Antenna net weight (kg)
13.0
Bracket weight (kg)
4.6
Mechanical downtilt (°)
-5 - 10
Mast diameter (mm)
50 - 115
Radome material
UPVC
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 620 (at 150 km/h)
Lateral: 160 (at 150 km/h)
Rear side: 680 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
9 x N Female
Bottom
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
15
5
Connector position
-2
DX 69
4 0M
Connector
80
Wind load (N)
18
Antenna dimensions (H x W x D) (mm)
75
DX4-1880-2690-90-16i-0F-C
Model: ATD4516C0
Preliminary Issue
Electrical Properties
Frequency range (MHz)
General
parameters
Calibration
and electrical
parameters
2010 - 2025 (A)
2500 - 2690 (D)
+45° , -45°
Electrical downtilt (°)
0
0
0
Electrical downtilt tolerance (°)
±1
±1
±1
Coupling factor between calibration port and each
antenna port (dB)
-26 ±2
-26 ±2
-26 ±2
Max. amplitude tolerance from calibration port to
input ports (dB)
< 0.7
< 0.7
< 0.7
Max. phase tolerance from calibration port to input
ports (°)
<5
<5
<5
Ports VSWR
< 1.5
< 1.5
< 1.5
Co-polarization isolation between ports (dB)
≥ 20
Cross-polarization isolation between ports (dB)
≥ 25
Single
column
beam
Horizontal 3dB beam width (°)
100 ±15
90 ±15
65 ±10
Gain (dBi)
≥ 13.5
≥ 14.5
≥ 16.0
Vertical 3dB beam width (°)
/
/
≥5
Cross polar ratio (0°) (dB)
≥ 17
≥ 17
≥ 16
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 23
≥ 23
≥ 25
/
/
≤ -16
Horizontal 3dB beam width (°)
65 ±5
65 ±5
65 ±5
Gain (dBi)
≥ 13.5
≥ 14.0
≥ 14.7
Gain roll-off at sector edge (dB)
12 ±2
12 ±2
12 ±2
Vertical 3dB beam width (°)
≥ 7.0
≥ 6.5
≥ 5.0
Cross polar ratio (0°) (dB)
≥ 18
≥ 18
≥ 18
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
≤ -16
≤ -16
≤ -16
Null fill at first null point below main
beam (dB)
Typ. -18
Typ. -18
Typ. -18
0° direct beam gain (dBi)
≥ 20.0
≥ 20.5
≥ 22.0
0° direct beam horizontal 3dB beam
width (°)
≤ 29
≤ 26
≤ 21
0° direct beam side lobe suppression (dB)
≤ -12
≤ -12
≤ -12
±60° direct beam gain (dBi)
≥ 17.5
≥ 17.5
≥ 19.5
±60° direct beam horizontal 3dB
beam width (°)
≤ 35
≤ 32
≤ 25
±60° direct beam horizontal side
lobe suppression (dB)
≤ -5
≤ -5
≤ -4
0° direct beam cross polar ratio (0°) (dB)
≥ 20
≥ 20
≥ 20
0° direct beam front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
Radiation
parameters
1880 - 1920 (F)
Polarization
65°
Broadcast
beam
Service
beam
80
18
Hz
0M
69
- 2 X4
D
6
15
DX4-1880-2690-90-16i-0F-C
Model: ATD4516C0
Preliminary Issue
Electrical Properties
Distance between columns (mm)
1396 x 319 x 116
Antenna net weight (kg)
13.0
Bracket weight (kg)
4.6
Mechanical downtilt (°)
-5 - 10
Mast diameter (mm)
50 - 115
Radome material
UPVC
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 620 (at 150 km/h)
Lateral: 160 (at 150 km/h)
Rear side: 680 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
4 x cluster Female
Bottom
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
7
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
15
Connector position
-2
DX 69
4 0M
Connector
80
Wind load (N)
18
Antenna dimensions (H x W x D) (mm)
75
DX4-1880-2690-90-16i-3F-C
Model: ATD4516C1
Preliminary Issue
Electrical Properties
Frequency range (MHz)
General
parameters
Calibration
and electrical
parameters
2010 - 2025 (A)
2500 - 2690 (D)
+45° , -45°
Electrical downtilt (°)
3
3
3
Electrical downtilt tolerance (°)
±1
±1
±1
Coupling factor between calibration port and each
antenna port (dB)
-26 ±2
-26 ±2
-26 ±2
Max. amplitude tolerance from calibration port to
input ports (dB)
< 0.7
< 0.7
< 0.7
Max. phase tolerance from calibration port to input
ports (°)
<5
<5
<5
Ports VSWR
< 1.5
< 1.5
< 1.5
Co-polarization isolation between ports (dB)
≥ 25
Cross-polarization isolation between ports (dB)
≥ 28
Single
column
beam
Horizontal 3dB beam width (°)
100 ±15
90 ±15
65 ±10
Gain (dBi)
≥ 13.5
≥ 14.5
≥ 16.0
Vertical 3dB beam width (°)
/
/
≥5
Cross polar ratio (0°) (dB)
≥ 17
≥ 17
≥ 16
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 23
≥ 23
≥ 25
/
/
≤ -16
Horizontal 3dB beam width (°)
65 ±5
65 ±5
65 ±5
Gain (dBi)
≥ 13.5
≥ 14.0
≥ 14.7
Gain roll-off at sector edge (dB)
12 ±2
12 ±2
12 ±2
Vertical 3dB beam width (°)
≥ 7.0
≥ 6.5
≥ 5.0
Cross polar ratio (0°) (dB)
≥ 18
≥ 18
≥ 18
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
≤ -16
≤ -16
≤ -16
Null fill at first null point below main
beam (dB)
Typ. -18
Typ. -18
Typ. -18
0° direct beam gain (dBi)
≥ 20.0
≥ 20.5
≥ 22.0
0° direct beam horizontal 3dB beam
width (°)
≤ 29
≤ 26
≤ 21
0° direct beam side lobe suppression (dB)
≤ -12
≤ -12
≤ -12
±60° direct beam gain (dBi)
≥ 17.5
≥ 17.5
≥ 19.5
±60° direct beam horizontal 3dB
beam width (°)
≤ 35
≤ 32
≤ 25
±60° direct beam horizontal side
lobe suppression (dB)
≤ -5
≤ -5
≤ -4
0° direct beam cross polar ratio (0°) (dB)
≥ 20
≥ 20
≥ 20
0° direct beam front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
Radiation
parameters
1880 - 1920 (F)
Polarization
65°
Broadcast
beam
Service
beam
80
18
Hz
0M
69
- 2 X4
D
8
15
DX4-1880-2690-90-16i-3F-C
Model: ATD4516C1
Preliminary Issue
Electrical Properties
Distance between columns (mm)
1396 x 319 x 116
Antenna net weight (kg)
13.0
Bracket weight (kg)
4.6
Mechanical downtilt (°)
-5 - 10
Mast diameter (mm)
50 - 115
Radome material
UPVC
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 620 (at 150 km/h)
Lateral: 160 (at 150 km/h)
Rear side: 680 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
4 x cluster Female
Bottom
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
15
9
Connector position
-2
DX 69
4 0M
Connector
80
Wind load (N)
18
Antenna dimensions (H x W x D) (mm)
75
DX4-1880-2690-90-16i-6F-C
Model: ATD4516C2
Preliminary Issue
Electrical Properties
Frequency range (MHz)
General
parameters
Calibration
and electrical
parameters
2010 - 2025 (A)
2500 - 2690 (D)
+45° , -45°
Electrical downtilt (°)
6
6
6
Electrical downtilt tolerance (°)
±1
±1
±1
Coupling factor between calibration port and each
antenna port (dB)
-26 ±2
-26 ±2
-26 ±2
Max. amplitude tolerance from calibration port to
input ports (dB)
< 0.7
< 0.7
< 0.7
Max. phase tolerance from calibration port to input
ports (°)
<5
<5
<5
Ports VSWR
< 1.5
< 1.5
< 1.5
Co-polarization isolation between ports (dB)
≥ 28
Cross-polarization isolation between ports (dB)
≥ 30
Single
column
beam
Horizontal 3dB beam width (°)
100 ±15
90 ±15
65 ±10
Gain (dBi)
≥ 13.5
≥ 14.5
≥ 16.0
Vertical 3dB beam width (°)
/
/
≥5
Cross polar ratio (0°) (dB)
≥ 17
≥ 17
≥ 16
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 23
≥ 23
≥ 25
/
/
≤ -16
Horizontal 3dB beam width (°)
65 ±5
65 ±5
65 ±5
Gain (dBi)
≥ 13.5
≥ 14.0
≥ 14.7
Gain roll-off at sector edge (dB)
12 ±2
12 ±2
12 ±2
Vertical 3dB beam width (°)
≥ 7.0
≥ 6.5
≥ 5.0
Cross polar ratio (0°) (dB)
≥ 18
≥ 18
≥ 18
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
≤ -16
≤ -16
≤ -16
Null fill at first null point below main
beam (dB)
Typ. -18
Typ. -18
Typ. -18
0° direct beam gain (dBi)
≥ 20.0
≥ 20.5
≥ 22.0
0° direct beam horizontal 3dB beam
width (°)
≤ 29
≤ 26
≤ 21
0° direct beam side lobe suppression (dB)
≤ -12
≤ -12
≤ -12
±60° direct beam gain (dBi)
≥ 17.5
≥ 17.5
≥ 19.5
±60° direct beam horizontal 3dB
beam width (°)
≤ 35
≤ 32
≤ 25
±60° direct beam horizontal side
lobe suppression (dB)
≤ -5
≤ -5
≤ -4
0° direct beam cross polar ratio (0°) (dB)
≥ 20
≥ 20
≥ 20
0° direct beam front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
Radiation
parameters
1880 - 1920 (F)
Polarization
65°
Broadcast
beam
Service
beam
80
18
Hz
0M
69
- 2 X4
D
0
16
DX4-1880-2690-90-16i-6F-C
Model: ATD4516C2
Preliminary Issue
Electrical Properties
Distance between columns (mm)
1396 x 319 x 116
Antenna net weight (kg)
13.0
Bracket weight (kg)
4.6
Mechanical downtilt (°)
-5 - 10
Mast diameter (mm)
50 - 115
Radome material
UPVC
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 620 (at 150 km/h)
Lateral: 160 (at 150 km/h)
Rear side: 680 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
4 x cluster Female
Bottom
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
16
1
Connector position
-2
DX 69
4 0M
Connector
80
Wind load (N)
18
Antenna dimensions (H x W x D) (mm)
75
DX4-1880-2690-90-16i-9F-C
Model: ATD4516C3
Preliminary Issue
Electrical Properties
Frequency range (MHz)
General
parameters
Calibration
and electrical
parameters
2010 - 2025 (A)
2500 - 2690 (D)
+45° , -45°
Electrical downtilt (°)
9
9
9
Electrical downtilt tolerance (°)
±1
±1
±1
Coupling factor between calibration port and each
antenna port (dB)
-26 ±2
-26 ±2
-26 ±2
Max. amplitude tolerance from calibration port to
input ports (dB)
< 0.7
< 0.7
< 0.7
Max. phase tolerance from calibration port to input
ports (°)
<5
<5
<5
Ports VSWR
< 1.5
< 1.5
< 1.5
Co-polarization isolation between ports (dB)
≥ 28
Cross-polarization isolation between ports (dB)
≥ 30
Single
column
beam
Horizontal 3dB beam width (°)
100 ±15
90 ±15
65 ±10
Gain (dBi)
≥ 13.5
≥ 14.5
≥ 16.0
Vertical 3dB beam width (°)
/
/
≥5
Cross polar ratio (0°) (dB)
≥ 17
≥ 17
≥ 16
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 23
≥ 23
≥ 25
/
/
≤ -16
Horizontal 3dB beam width (°)
65 ±5
65 ±5
65 ±5
Gain (dBi)
≥ 13.5
≥ 14.0
≥ 14.7
Gain roll-off at sector edge (dB)
12 ±2
12 ±2
12 ±2
Vertical 3dB beam width (°)
≥ 7.0
≥ 6.5
≥ 5.0
Cross polar ratio (0°) (dB)
≥ 18
≥ 18
≥ 18
Cross polar ratio (±60°) (dB)
≥ 10
≥ 10
≥ 10
Front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
≤ -16
≤ -16
≤ -16
Null fill at first null point below main
beam (dB)
Typ. -18
Typ. -18
Typ. -18
0° direct beam gain (dBi)
≥ 20.0
≥ 20.5
≥ 22.0
0° direct beam horizontal 3dB beam
width (°)
≤ 29
≤ 26
≤ 21
0° direct beam side lobe suppression (dB)
≤ -12
≤ -12
≤ -12
±60° direct beam gain (dBi)
≥ 17.5
≥ 17.5
≥ 19.5
±60° direct beam horizontal 3dB
beam width (°)
≤ 35
≤ 32
≤ 25
±60° direct beam horizontal side
lobe suppression (dB)
≤ -5
≤ -5
≤ -4
0° direct beam cross polar ratio (0°) (dB)
≥ 20
≥ 20
≥ 20
0° direct beam front to back ratio (dB)
≥ 28
≥ 28
≥ 28
Vertical side lobe suppression for first
side lobe above main beam (dB)
Radiation
parameters
1880 - 1920 (F)
Polarization
65°
Broadcast
beam
Service
beam
80
18
Hz
0M
69
- 2 X4
D
2
16
DX4-1880-2690-90-16i-9F-C
Model: ATD4516C3
Preliminary Issue
Electrical Properties
Distance between columns (mm)
1396 x 319 x 116
Antenna net weight (kg)
13.0
Bracket weight (kg)
4.6
Mechanical downtilt (°)
-5 - 10
Mast diameter (mm)
50 - 115
Radome material
UPVC
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
Frontal: 620 (at 150 km/h)
Lateral: 160 (at 150 km/h)
Rear side: 680 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
4 x cluster Female
Bottom
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
16
3
Connector position
-2
DX 69
4 0M
Connector
80
Wind load (N)
18
Antenna dimensions (H x W x D) (mm)
75
DX-2300-2700-60-18i-M
Model: A25451804
Electrical Properties
Frequency range (MHz)
Polarization
2300 - 2500
2500 - 2700
+45° , -45°
VSWR
≤1.45
(°)
(dBi)
(°)
(dB)Typ.
Gain
Side lobe suppression for first
side lobe above horizon
2
17.0
2
18
6
17.3
6
17
10
17.0
10
16
2
17.3
2
18
6
17.6
6
17
Horizontal 3dB beam width (°)
64
60
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Electrical downtilt (°)
Max. CW input power (W)
Impedance (Ω)
Grounding
7.0
6.5
10
17.1
10
16
≥30
Typ. 30
15
2 - 10
250
50
DC Ground
Mechanical Properties
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
1060 x 155 x 79
6
2.7
Mechanical downtilt (°)
0 - 16
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
50 - 115
Fiberglass
-55 .. +65
Frontal: 120 (v=150 km/h)
Lateral: 90 (v=150 km/h)
Rear side: 180 (v=150 km/h)
200
2 x N-50KF
Wind load (N)
Max. wind velocity (km/h)
Connector
2300 - 2500 MHz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
00
23
Issue: 2012-10-26
2300 - 2700
X
+45°
-45°
N-50KF
N-50KF
2500 - 2700 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
0M
70
-2 X
D
4
16
DXX-2300-2700/2300-2700-65/65-18i/18i-M
Model: A25451803
Electrical Properties
Frequency range (MHz)
Polarization
2300 - 2500
2500 - 2700
+45° , -45°
VSWR
≤1.45
(°)
(dBi)
(°)
(dB)Typ.
Gain
Side lobe suppression for first
side lobe above horizon
2
17.0
2
18
6
17.3
6
17
10
17.0
10
16
2
17.3
2
18
6
17.6
6
17
Horizontal 3dB beam width (°)
65
65
Vertical 3dB beam width (°)
Isolation between ports (dB)
Front to back ratio, copolar (dB)
Cross polar ratio (dB)
Electrical downtilt (°)
Max. CW input power (W)
Impedance (Ω)
Grounding
7.0
6.5
10
17.1
10
16
≥30
Typ. 28
15
2 - 10
250
50
DC Ground
Mechanical Properties
Dimensions (H x W x D) (mm)
Net weight (kg)
Bracket weight (kg)
1060 x 289 x 85
11
4.5
0 - 16
Max. wind velocity (km/h)
Connector
2300 - 2500 MHz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
2300 - 2700
X
+45°
-45°
+45°
-45°
N-50KF
N-50KF
N-50KF
N-50KF
2500 - 2700 MHz
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
27
00
M
Hz
Wind load (N)
2300 - 2700
X
16
5
50 - 115
Fiberglass
-55 .. +65
Frontal: 230 (v=150 km/h)
Lateral: 100 (v=150 km/h)
Rear side: 340 (v=150 km/h)
200
4 x N-50KF
-2
70
0/
23
DX 00
X
Mast diameter (mm)
Radomematerial
Operating temperature (℃)
23
00
Mechanical downtilt (°)
CX-1710-2690-65-18i-M
Model: A264518S0
Electrical Properties
1710 - 2690
Frequency range (MHz)
1710 - 1990
1920 - 2200
Polarization
2200 - 2490
+45° , -45°
Electrical downtilt (°)
2 - 12 , continuously adjustable
Gain (dBi)
2°
6°
12°
2°
6°
12°
2°
6°
12°
2°
6°
12°
17.2
17.3
16.8
17.7
17.8
17.5
18.2
18.3
17.5
18.5
18.3
17.2
2°
6°
12°
2°
6°
12°
2°
6°
12°
2°
6°
12°
17
17
15
16
16
15
19
18
16
19
18
16
Side lobe suppression for first side
lobe above main beam (Typ.) (dB)
Horizontal 3dB beam width (°)
69
65
Vertical 3dB beam width (°)
5.7
6.1
VSWR
< 1.5
Isolation between ports (dB)
≥ 30
Front to back ratio, copolar (dB)
Typ. 30
Cross polar ratio (dB)
2490 - 2690
0°
Typ. 20
±60°
Typ. 10
62
60
5.5
4.9
Max. power per input (W)
250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Squint (°)
Typ. 3.0
Tracking (dB)
Typ. 2.0 (within 10dB HBW)
Impedance (Ω)
50
Grounding
DC Ground
Mechanical Properties
1793 x Φ 230 and Φ 250
26.2
Radome material
Fiberglass
Radome colour
Light grey
Operational temperature (℃)
-55 .. +65
310 (at 150 km/h)
Max. operational wind speed (km/h)
150
Survival wind speed (km/h)
200
Connector
Connector position
Relative directions of internal antennas
(sector axis)
Mechanical interface
3 x 2 x 7/16 DIN Female
1443
Wind load (N)
Φ 230
1793
Antenna net weight (kg)
Bottom - inside service area
0°, 120°, 240°
Flange connection 3 x M10 bolt
at a graduated diameter of 257 mm
10
17
Accessories (only Huawei product applies, order separately if required)
SBT
ASBT00001
RCU
ARCU01109 (AISG 1.1)
ARCU02004 (AISG 2.0)
service area
350
Antenna dimensions (H x W x D) (mm)
(cover attached)
Φ 250
Hz
0M
69
-2 X
C
6
16
CX-1710-2690-65-18i-M
Model: A264518S0
57
55
7/1
(F)
6
7/1
6(
-45°
59
F)
-45°
7/16 (F)
-45°
-45°
1710 - 2690 1710 - 2690
-45°
7/1
6(
F)
7/16 (F)
1710 - 2690
-45°
F)
6(
7/1
Unit: mm
Flange interface (thickness: 5 mm):
2300 - 2500 MHz
2500 - 2700 MHz
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of an antenna. These facts must
be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Hz
M
www.huawei.com
16
7
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
-2
CX 690
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
10
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
17
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
3 Sector Clamp Kit Mounting Hardware
Model: ASMC00001 ASMC00002 ASMC00003
•
•
D
Wmax
•
Suitable for all antennas with an
antenna housing width less than
400 mm.
Adjustment is available together
with standard bracket within
antenna package.
Support the third party
customized camouflage cover.
Wmax: Maximum width of antenna
D: Distance between mast center
and back of antenna
dia mast
me
ter
3 sector clamp
mounting support clamp
Specifications
Model
ASMC00001
ASMC00002
ASMC00003
Angle between antennas (°)
120
120
120
Mast diameter (mm)
88.9
114.3
139.7
Wmax (mm)
280
380
400
D (mm)
100
113
128
Number of pieces
2 x 3 sector clamp
2 x 3 sector clamp
2 x 3 sector clamp
2 x mounting support clamp 2 x mounting support clamp 2 x mounting support clamp
6 x connecting plate
6 x connecting plate
6 x connecting plate
Weight (approx.) (kg)
5.8
6.3
6.6
Max. operational wind speed (km/h)
150
150
150
Hot-dip galvanized steel
Hot-dip galvanized steel
Hot-dip galvanized steel
Stainless steel
Stainless steel
Stainless steel
3 sector clamp
Mounting support clamp
Material
Connecting plate
Screws
Nuts
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
C
TS
8
16
AISG Color Coding Standard
AISG Color Coding for Connectors on Base Station Antennas
Upper Band Edge Range
Assigned Color Code
Base Color Tag
700MHz to 1000MHz
RAL 3020
r
1001MHz to 1700MHz
RAL 6029
g
1701MHz to 2300MHz
RAL 5015
b
2301MHz to 4000MHz
RAL 1023
y
One Color making Different Pattern on Dual-band or Multi-band
r,g,b,y
Dual-band Antenna
800/900MHz EasyRET
800/2100MHz EasyRET
1800Mhz/2/2.6GHz EasyRET
1800MHz/2/2.6GHz MET
Tri-band Antenna
Quad-band Antenna
800/1800MHz/2/2.6GHz EasyRET
Penta-band Antenna
69
AI
SG
C
St olo
an r
da Co
rd din
1
g
800/900/1800MHz/2/2.6GHz EasyRET
AISG Color Coding Standard
Huawei RCU SN Rule
Total: 19bytes
H
Factory code
W
M
X
X
Total 10 alphanumeric, com from
relative antenna
3~7, last 4 digits of antenna BBOM
8th type: Year(last no. of year)
9th type: Month (1~9, A,B ,C)
10~13th type: running no.
ALD Category: 1 Capital letter
D~G: TMA, may have more option in the future.
P: External pre-commission RCU, may have more option
in the future.
M: integrated RCU, may have more option in the future
B: Normal RCU, ARCU2004, ARCU1115
X
X
X
X
r
R
R
Make up 0~9 digits,
decided by relevant
latter color coding ,
fill 19digits
Color coding according AISG standard
Small letter: array color and pattern
r-red, rr-2nd red, rrr-3rd red, etc
g-green, gg-2nd green, etc
b-blue, bb-2nd blue, etc.
y-yellow, yy-2nd yellow, etc.
Capital letter: array position indicator (if needed)
Horizontal-L,CL,C,CR,R
Vertical-T,MT,M,MB,B
Note: array color and pattern defined by HW, array
position HW use definition in AISG standard
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
17
g
in
od
rC d
lo ar
Co nd
G Sta
0
S
AI
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
B
Antenna Line
Products
DTMA08-008
Model: ATA801100 (AISG 1.1)
DTMA08-009
Model: ATA802000 (AISG 2.0)
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the
signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves
voice and data communication quality.
Features
y High linearity and low noise performance.
y Balanced LNA design and power failure bypass for high reliability.
y Light weight and compact design.
y Variable gain: 8 - 16 dB, default gain: 12 dB.
y Wall mounting and mast mounting.
y Built-in lightning protection up to 10 kA.
y Support AISG 1.1 and AISG 2.0 protocol.
Appearance and Block Diagram
RX
Hz
M
Hz
62
- 8 21M
32 - 8
: 8 91
:7
TX
2
17
DTMA08-008
Model: ATA801100 (AISG 1.1)
DTMA08-009
Model: ATA802000 (AISG 2.0)
Tx Specifications
Frequency range (MHz)
791 - 821
Bandwidth (MHz)
30
Insertion loss* (dB)
Avg. < 0.4
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -117 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
832 - 862
Bandwidth (MHz)
30
Return loss(dB)
≥ 18 (DC ON)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB)
≤ 3 (DC OFF)
Gain (dB)
8 - 16 (0.5 dB Step, Default gain: 12 dB)
Noise figure** (dB)
Avg. < 1.4 (12 dB Gain, +22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 8 (12 dB Gain)
OIP3 (dBm)
≥ 20 (12 dB Gain)
Electrical properties
CWA Mode
AISG Mode
DC supply voltage (V)
8.5 - 15
9 - 30
Operating current per TMA (mA)
(without RET)
40 - 110
40 - 370
Alarm management (mA)
150 - 280
AISG
Power consumption (W)
< 3.5
Environmental Specification
Operating temperature range (℃)
-40 .. +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
365 x 515 x 215
≤ 6.1 (with brackets)
Packing weight (kg)
≤ 7.4
DTMA Volume (L)
Approx. 5.5
AISG connector
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5:
RS485A, pin7: DC return, other pins: not connected)
Mast diameter (mm)
Connector
Wall mounting: with 4 screws (max. 8 mm diameter)
Mast mounting
Default: 30 - 125 // Optional: 40 - 140
4 x 7/16 DIN Female (Long neck)
17
3
Mounting
:8
: 7 32
91 - 8
- 8 62M
21
Hz
M
Hz
DTMA weight (kg)
RX
Packing dimensions (W x H x D) (mm)
190 x 240 x 120 (without connectors, without brackets)
TX
DTMA dimensions (W x H x D) (mm)
DTMA08-008
Model: ATA801100 (AISG 1.1)
DTMA08-009
Model: ATA802000 (AISG 2.0)
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
RX
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
M
Hz
62
- 8 21M
32 - 8
: 8 91
:7
TX
4
17
DTMA09-014
Model: ATA901102 (AISG 1.1)
DTMA09-015
Model: ATA902002 (AISG 2.0)
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the
signal-to-noise ratio and enhance the receiving sensibility of the BTS. It enhances the uplink coverage and improves uplink
and downlink imbalance of the BTS. It effectively reduces the transmitting power of cellphones, improves voice and data
communication quality.
Features
y High linearity and low noise performance.
y Balanced LNA design and power failure bypass for high reliability.
y Light weight and compact design.
y Variable gain: 8 - 16 dB, default gain: 12 dB.
y Wall mounting and mast mounting.
y Built-in lightning protection up to 10 kA.
y Support AISG 1.1 and AISG 2.0 protocol.
17
5
TX
RX
:8
: 9 80
25 - 9
- 9 05M
50
Hz
M
Hz
Appearance and Block Diagram
DTMA09-014
Model: ATA901102 (AISG 1.1)
DTMA09-015
Model: ATA902002 (AISG 2.0)
Tx Specifications
Frequency range (MHz)
925 - 950
Bandwidth (MHz)
25
Insertion loss* (dB)
Avg. < 0.4
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -117 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
880 - 905
Bandwidth (MHz)
25
Return loss(dB)
≥ 18 (DC ON)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB)
≤ 3.0 (DC OFF)
Gain (dB)
8 - 16 (0.5 dB Step, Default gain: 12 dB)
Noise figure** (dB)
Avg. < 1.4 (12 dB Gain, +22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 8 (12 dB Gain)
OIP3 (dBm)
≥ 20 (12 dB Gain)
Electrical properties
CWA Mode
AISG Mode
DC supply voltage (V)
8.5 - 15
9 - 30
Operating current per TMA (mA)
(without RET)
40 - 110
40 - 370
Alarm management (mA)
150 - 280
AISG
Power consumption (W)
< 3.5
Environmental Specification
Operating temperature range (℃)
-40 .. +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
DTMA dimensions (W x H x D) (mm)
198 x 308 x 70.5 (without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
315 x 515 x 190
DTMA weight (kg)
≤ 5.5 (with brackets)
Packing weight (kg)
≤ 6.6
DTMA Volume (L)
Approx. 4.3
AISG connector
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5:
RS485A, pin7: DC return, other pins: not connected)
Mounting
Mast diameter (mm)
Connector
Wall mounting: with 4 screws (max. 8 mm diameter)
Mast mounting
Default: 30 - 125 // Optional: 40 - 140
4 x 7/16 DIN Female (Long neck)
RX
Hz
M
Hz
05
- 9 50M
80 - 9
: 8 25
:9
TX
6
17
DTMA09-014
Model: ATA901102 (AISG 1.1)
DTMA09-015
Model: ATA902002 (AISG 2.0)
Unit: mm
www.huawei.com
17
7
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
:8
: 9 80
25 - 9
- 9 05M
50
Hz
M
Hz
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
RX
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
TX
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DTMA09-010
Model: ATA901101 (AISG 1.1)
DTMA09-011
Model: ATA902001 (AISG 2.0)
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the
signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves
voice and data communication quality.
Features
y High linearity and low noise performance.
y Balanced LNA design and power failure bypass for high reliability.
y Light weight and compact design.
y Variable gain: 8 - 16 dB, default gain: 12 dB.
y Wall mounting and mast mounting.
y Built-in lightning protection up to 10 kA.
y Support AISG 1.1 and AISG 2.0 protocol.
Appearance and Block Diagram
RX
Hz
M
Hz
15
- 9 60M
80 - 9
: 8 25
:9
TX
8
17
DTMA09-010
Model: ATA901101 (AISG 1.1)
DTMA09-011
Model: ATA902001 (AISG 2.0)
Tx Specifications
Frequency range (MHz)
925 - 960
Bandwidth (MHz)
35
Insertion loss* (dB)
Avg. < 0.4
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -117 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
880 - 915
Bandwidth (MHz)
35
Return loss(dB)
≥ 18 (DC ON)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB)
≤ 3.0 (DC OFF)
Gain (dB)
8 - 16 (0.5 dB Step, Default gain: 12 dB)
Noise figure** (dB)
Avg. < 1.4 (12 dB Gain, +22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 8 (12 dB Gain)
OIP3 (dBm)
≥ 20 (12 dB Gain)
Electrical properties
CWA Mode
AISG Mode
DC supply voltage (V)
8.5 - 15
9 - 30
Operating current per TMA (mA)
(without RET)
40 - 110
40 - 370
Alarm management (mA)
150 - 280
AISG
Power consumption (W)
< 3.5
Environmental Specification
Operating temperature range (℃)
-40 .. +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
365 x 515 x 215
≤ 6.5 (with brackets)
Packing weight (kg)
≤ 7.7
DTMA Volume (L)
Approx. 6.1
AISG connector
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5:
RS485A, pin7: DC return, other pins: not connected)
Mast diameter (mm)
Connector
Wall mounting: with 4 screws (max. 8 mm diameter)
Mast mounting
Default: 30 - 125 // Optional: 40 - 140
4 x 7/16 DIN Female (Long neck)
17
9
Mounting
:8
: 9 80
25 - 9
- 9 15M
60
Hz
M
Hz
DTMA weight (kg)
RX
Packing dimensions (W x H x D) (mm)
248 x 324 x 75.5 (without connectors, without brackets)
TX
DTMA dimensions (W x H x D) (mm)
DTMA09-010
Model: ATA901101 (AISG 1.1)
DTMA09-011
Model: ATA902001 (AISG 2.0)
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
RX
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
M
Hz
15
- 9 60M
80 - 9
: 8 25
:9
TX
0
18
DTMA09-016
Model: ATA901103 (AISG 1.1)
DTMA09-017
Model: ATA902003 (AISG 2.0)
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the
signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves
voice and data communication quality.
Features
y High linearity and low noise performance.
y Balanced LNA design and power failure bypass for high reliability.
y Light weight and compact design.
y Variable gain: 8 - 16 dB, default gain: 12 dB.
y Wall mounting and mast mounting.
y Built-in lightning protection up to 10 kA.
y Support AISG 1.1 and AISG 2.0 protocol.
18
1
TX
RX
:8
: 9 90
35 - 9
- 9 15
60 MH
z
M
Hz
Appearance and Block Diagram
DTMA09-016
Model: ATA901103 (AISG 1.1)
DTMA09-017
Model: ATA902003 (AISG 2.0)
Tx Specifications
Frequency range (MHz)
935 - 960
Bandwidth (MHz)
25
Insertion loss* (dB)
Avg. < 0.4
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -117 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
890 - 915
Bandwidth (MHz)
25
Return loss(dB)
≥ 18 (DC ON)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB)
≤ 3.0 (DC OFF)
Gain (dB)
8 - 16 (0.5 dB Step, Default gain: 12 dB)
Noise figure** (dB)
Avg. < 1.4 (12 dB Gain, +22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 8 (12 dB Gain)
OIP3 (dBm)
≥ 20 (12 dB Gain)
Electrical properties
CWA Mode
AISG Mode
DC supply voltage (V)
8.5 - 15
9 - 30
Operating current per TMA (mA)
(without RET)
40 - 110
40 - 370
Alarm management (mA)
150 - 280
AISG
Power consumption (W)
< 3.5
Environmental Specification
Operating temperature range (℃)
-40 .. +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
DTMA dimensions (W x H x D) (mm)
198 x 308 x 70.5 (without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
315 x 515 x 190
DTMA weight (kg)
≤ 5.5 (with brackets)
Packing weight (kg)
≤ 6.6
DTMA Volume (L)
Approx. 4.3
AISG connector
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5:
RS485A, pin7: DC return, other pins: not connected)
Mounting
Mast diameter (mm)
Connector
Wall mounting: with 4 screws (max. 8 mm diameter)
Mast mounting
Default: 30 - 125 // Optional: 40 - 140
4 x 7/16 DIN Female (Long neck)
RX
Hz
M
z
15 MH
- 9 60
90 - 9
: 8 35
:9
TX
2
18
DTMA09-016
Model: ATA901103 (AISG 1.1)
DTMA09-017
Model: ATA902003 (AISG 2.0)
Unit: mm
www.huawei.com
18
3
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
:8
: 9 90
35 - 9
- 9 15
60 MH
z
M
Hz
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
RX
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
TX
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DTMA18-022
Model: ATA181101 (AISG 1.1)
DTMA18-023
Model: ATA182001 (AISG 2.0)
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the
signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves
voice and data communication quality.
Features
y High linearity and low noise performance.
y Power failure bypass for high reliability.
y Light weight and compact design.
y Wall mounting and mast mounting.
y Built-in lightning protection up to 10 kA.
y Support AISG 1.1 and AISG 2.0 protocol.
Appearance and Block Diagram
RX
Hz
M
5
Hz
M
78
- 1 880
0
-1
71
: 1 805
:1
TX
4
18
DTMA18-022
Model: ATA181101 (AISG 1.1)
DTMA18-023
Model: ATA182001 (AISG 2.0)
Tx Specifications
Frequency range (MHz)
1805 - 1880
Bandwidth (MHz)
75
Insertion loss* (dB)
Avg. < 0.4
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -117 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
1710 - 1785
Bandwidth (MHz)
75
Return loss(dB)
≥ 18 (DC ON)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB)
≤ 3.0 (DC OFF)
Gain (dB)
12
Noise figure** (dB)
Avg. < 1.4 (+22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 24
Electrical properties
CWA Mode
AISG Mode
DC supply voltage (V)
8.5 - 15
9 - 30
Operating current per TMA (mA)
(without RET)
40 - 120
40 - 370
Alarm management (mA)
150 - 280
AISG
Power consumption (W)
< 3.5
Environmental Specification
Operating temperature range (℃)
-40 .. +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
315 x 465 x 225
≤ 5.1 (with brackets)
Packing weight (kg)
≤ 6.2
DTMA Volume (L)
Approx. 3.5
AISG connector
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5:
RS485A, pin7: DC return, other pins: not connected)
Mast diameter (mm)
Connector
Wall mounting: with 4 screws (max. 8 mm diameter)
Mast mounting
Default: 30 - 125 // Optional: 40 - 140
4 x 7/16 DIN Female (Long neck)
RX
Mounting
18
5
DTMA weight (kg)
:1
: 1 710
80
-1
5
- 1 785
88
M
0
Hz
M
Hz
Packing dimensions (W x H x D) (mm)
160 x 220 x 100 (without connectors, without brackets)
TX
DTMA dimensions (W x H x D) (mm)
DTMA18-022
Model: ATA181101 (AISG 1.1)
DTMA18-023
Model: ATA182001 (AISG 2.0)
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
RX
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
M
5
Hz
M
78
- 1 880
0
-1
71
: 1 805
:1
TX
6
18
DTMA21-006
Model: ATA211101 (AISG 1.1)
DTMA21-007
Model: ATA212001 (AISG 2.0
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the
signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves
voice and data communication quality.
Features
y High linearity and low noise performance.
y Power failure bypass for high reliability.
y Light weight and compact design.
y Wall mounting and mast mounting.
y Built-in lightning protection up to 10 kA.
y Support AISG 1.1 and AISG 2.0 protocol.
18
7
TX
RX
:1
: 2 920
11
-1
0
- 2 980
M
17
0M Hz
Hz
Appearance and Block Diagram
DTMA21-006
Model: ATA211101 (AISG 1.1)
DTMA21-007
Model: ATA212001 (AISG 2.0
Tx Specifications
Frequency range (MHz)
2110 - 2170
Bandwidth (MHz)
60
Insertion loss* (dB)
Avg. < 0.25
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -122 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
1920 - 1980
Bandwidth (MHz)
60
Return loss(dB)
≥ 18 (DC ON)
≥ 15 (DC OFF)
Insertion loss in by-pass mode (dB)
≤ 3.0 (DC OFF)
Gain (dB)
12 ±1
Noise figure** (dB)
Avg. < 1.2 (+22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 24
Electrical properties
CWA Mode
AISG Mode
DC supply voltage (V)
8.5 - 15
9 - 30
Operating current per TMA (mA)
(without RET)
40 - 120
40 - 370
Alarm management (mA)
150 - 280
AISG
Power consumption (W)
< 3.5
Environmental Specification
Operating temperature range (℃)
-40 .. +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
DTMA dimensions (W x H x D) (mm)
160 x 205 x 54.5 (without connectors, without brackets)
Packing dimensions (W x H x D) (mm)
265 x 395 x 195
DTMA weight (kg)
≤ 3.3 (with brackets)
Packing weight (kg)
≤ 4.0
DTMA Volume (L)
Approx. 1.8
AISG connector
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5:
RS485A, pin7: DC return, other pins: not connected)
Mounting
Mast diameter (mm)
Connector
Wall mounting: with 4 screws (max. 8 mm diameter)
Mast mounting
Default: 30 - 125 // Optional: 40 - 140
4 x 7/16 DIN Female (Long neck)
RX
Hz
0M Hz
98
M
- 1 170
0
-2
92
: 1 110
:2
TX
8
18
DTMA21-006
Model: ATA211101 (AISG 1.1)
DTMA21-007
Model: ATA212001 (AISG 2.0
Unit: mm
www.huawei.com
18
9
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
:1
: 2 920
11
-1
0
- 2 980
M
17
0M Hz
Hz
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
RX
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
TX
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DTMA26-012
Model: ATA261100 (AISG 1.1)
DTMA26-013
Model: ATA262000 (AISG 2.0)
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the
signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves
voice and data communication quality.
Features
y High linearity and low noise performance.
y Power failure bypass for high reliability.
y Light weight and compact design.
y Wall mounting and mast mounting.
y Built-in lightning protection up to 10 kA.
y Support AISG 1.1 and AISG 2.0 protocol.
Appearance and Block Diagram
RX
Hz
0M Hz
57
M
- 2 690
0
-2
50
: 2 620
:2
TX
0
19
DTMA26-012
Model: ATA261100 (AISG 1.1)
DTMA26-013
Model: ATA262000 (AISG 2.0)
Tx Specifications
Frequency range (MHz)
2620 - 2690
Bandwidth (MHz)
70
Insertion loss* (dB)
Avg. < 0.4
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -117 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
2500 - 2570
Bandwidth (MHz)
70
Return loss(dB)
≥ 18 (DC ON)
≥ 13 (DC OFF)
Insertion loss in by-pass mode (dB)
≤ 3.0 (DC OFF)
Gain (dB)
12 ±1
Noise figure** (dB)
Avg. < 1.3 (+22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 24
Electrical properties
CWA Mode
AISG Mode
DC supply voltage (V)
8.5 - 15
9 - 30
Operating current per TMA (mA)
(without RET)
40 - 120
40 - 370
Alarm management (mA)
150 - 280
AISG
Power consumption (W)
< 3.5
Environmental Specification
Operating temperature range (℃)
-40 .. +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
160 x 210 x 54.5 (without connectors, without brackets)
265 x 395 x 195
DTMA weight (kg)
≤ 3.1 (with brackets)
Packing weight (kg)
≤ 4.0
DTMA Volume (L)
Approx. 1.8
AISG connector
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B, pin5:
RS485A, pin7: DC return, other pins: not connected)
4 x 7/16 DIN Female (Long neck)
1
19
Connector
Default: 30 - 125 // Optional: 40 - 140
:2
: 2 500
62
-2
0
- 2 570
M
69
0M Hz
Hz
Mast diameter (mm)
Wall mounting: with 4 screws (max. 8 mm diameter)
Mast mounting
RX
Mounting
TX
DTMA dimensions (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
DTMA26-012
Model: ATA261100 (AISG 1.1)
DTMA26-013
Model: ATA262000 (AISG 2.0)
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
RX
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
0M Hz
57
M
- 2 690
0
-2
50
: 2 620
:2
TX
2
19
DTMA09-018
Model: ATA902004 (AISG 2.0)
Preliminary Issue
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the
signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves
voice and data communication quality.
Features
y High linearity and low noise performance.
y Balanced LNA design and power failure bypass for high reliability.
y Light weight and compact design.
y Variable gain: 8 - 16 dB, default gain: 16 dB.
y Wall mounting and mast mounting.
y Built-in lightning protection up to 10 kA.
y Support AISG 2.0 protocol.
19
3
TX
RX
:8
: 9 80
25 - 9
- 9 15M
60
Hz
M
Hz
Appearance and Block Diagram
DTMA09-018
Model: ATA902004 (AISG 2.0)
Preliminary Issue
Tx Specifications
Frequency range (MHz)
Bandwidth (MHz)
Insertion loss* (dB)
Return loss (dB)
Input power (W)
Intermodulation products in Rx band (dBm)
Frequency range (MHz)
Bandwidth (MHz)
Return loss(dB)
Insertion loss in by-pass mode (dB)
Gain (dB)
Noise figure** (dB)
925 - 960
35
Avg. < 0.4
≥ 18
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
≤ -117 (2 TX carriers at +43 dBm)
Rx Specifications
880 - 915
35
≥ 18 (DC ON)
≥ 13 (DC OFF)
≤ 3.0 (DC OFF)
8 - 16 (0.5 dB Step)
Avg. < 1.3 (16 dB Gain, +22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 12 (16 dB Gain)
OIP3 (dBm)
≥ 24 (16 dB Gain)
Filter Specifications
Frequency range (MHz)
Insertion loss (dB)
Return loss (dB)
Input power (W)
Intermodulation products (dBm)
DC supply voltage (V)
Operating current per TMA (mA)
(without RET)
Alarm management (mA)
Power consumption (W)
1700 - 2700
< 0.5
≥ 18
< 160 (+52 dBm) CW
≤ -117 (3rd order, 2 TX carriers at +43 dBm)
Electrical properties
CWA Mode
AISG Mode
8.5 - 15
8.5 - 30
40 - 110 (12 V DC)
40 - 370 (12 V DC)
150 - 280 (12 V DC)
AISG
< 3.5
Environmental Specification
Operating temperature range (℃)
IP rating
MTBF (hours)
EMC
Lightning protection (kA)
RF connectors
AISG connector
Mounting
Weight (kg)
Mast diameter (mm)
Dimensions (W x H x D) (mm)
Volume (L)
-40 .. +65
IP67
> 1,000,000
ETS 300 342-3
10 (8/20 us)
Mechanical Specification
4 x 7/16 DIN Female (Long neck)
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B,
pin5: RS485A, pin7: DC return, other pins: not connected)
Wall mounting // Mast mounting
≤ 8.5 (with brackets)
Default: 30 - 125 // Optional: 40 - 140
248 x 324 x 100 (without connectors, without brackets)
Approx. 8.0
RX
Hz
M
Hz
15
- 9 60M
80 - 9
: 8 25
:9
TX
4
19
DTMA09-018
Model: ATA902004 (AISG 2.0)
Preliminary Issue
Unit: mm
www.huawei.com
19
5
Issue: 2013-01-08
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
:8
: 9 80
25 - 9
- 9 15M
60
Hz
M
Hz
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
RX
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
TX
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DTMA21-019
Model: ATA212004 (AISG 2.0)
Preliminary Issue
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the
signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves
voice and data communication quality.
Features
y High linearity and low noise performance.
y Power failure bypass for high reliability.
y Light weight and compact design.
y Wall mounting and mast mounting.
y Built-in lightning protection up to 10 kA.
y Support AISG 2.0 protocol.
Appearance and Block Diagram
RX
Hz
0M Hz
98
M
- 1 170
0
-2
92
: 1 110
:2
TX
6
19
DTMA21-019
Model: ATA212004 (AISG 2.0)
Preliminary Issue
Tx Specifications
Frequency range (MHz)
Bandwidth (MHz)
Insertion loss* (dB)
Return loss (dB)
Input power (W)
Intermodulation products in Rx band (dBm)
Frequency range (MHz)
Bandwidth (MHz)
Return loss(dB)
Insertion loss in by-pass mode (dB)
Gain (dB)
Noise figure** (dB)
2110 - 2170
60
Avg. < 0.3
≥ 18
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
≤ -122 (2 TX carriers at +43 dBm)
Rx Specifications
1920 - 1980
60
≥ 18 (DC ON)
≥ 15 (DC OFF)
≤ 3.0 (DC OFF)
12 ±1
Avg. < 1.3 (+22 ... +28 ℃)
Output 1dB compression (dBm)
OIP3 (dBm)
≥ 12
≥ 24
Filter GSM900 Specifications
Frequency range (MHz)
Bandwidth (MHz)
Insertion loss (dB)
Return loss (dB)
Isolation (dB)
Input power (W)
Intermodulation products (dBm)
DC supply voltage (V)
Operating current per TMA (mA)
(without RET)
Alarm management (mA)
Power consumption (W)
880 - 960
80
< 0.3
≥ 18
> 45 (1710 - 1880 MHz // 1920 - 1980 MHz // 2110 - 2170 MHz)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
≤ -117 (3rd order, 2 TX carriers at +43 dBm)
Electrical properties
CWA Mode
AISG Mode
8.5 - 15
8.5 - 30
40 - 120 (12 V DC)
40 - 370 (12 V DC)
150 - 280 (12 V DC)
AISG
< 3.5
Environmental Specification
Mast diameter (mm)
Dimensions (W x H x D) (mm)
Volume (L)
Default: 30 - 125 // Optional: 40 - 140
228 x 205 x 54.5 (without connectors, without brackets)
Approx. 2.6
19
7
Mounting
Weight (kg)
:1
: 2 920
11
-1
0
- 2 980
M
17
0M Hz
Hz
AISG connector
Mechanical Specification
6 x 7/16 DIN Female (Long neck)
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B,
pin5: RS485A, pin7: DC return, other pins: not connected)
Wall mounting // Mast mounting
≤ 5.5 (with brackets)
RX
RF connectors
-40 .. +65
IP67
> 1,000,000
ETS 300 342-3
10 (8/20 us)
TX
Operating temperature range (℃)
IP rating
MTBF (hours)
EMC
Lightning protection (kA)
DTMA21-019
Model: ATA212004 (AISG 2.0)
Preliminary Issue
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
RX
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
0M Hz
98
M
- 1 170
0
-2
92
: 1 110
:2
TX
8
19
DTMA21-020
Model: ATA212002 (AISG 2.0)
Preliminary Issue
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the
signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves
voice and data communication quality.
Features
y High linearity and low noise performance.
y Power failure bypass for high reliability.
y Light weight and compact design.
y Wall mounting and mast mounting.
y Built-in lightning protection up to 10 kA.
y Support AISG 2.0 protocol.
19
9
TX
RX
:1
: 2 920
11
-1
0
- 2 980
M
17
0M Hz
Hz
Appearance and Block Diagram
DTMA21-020
Model: ATA212002 (AISG 2.0)
Preliminary Issue
Tx Specifications
Frequency range (MHz)
Bandwidth (MHz)
Insertion loss* (dB)
Return loss (dB)
Input power (W)
Intermodulation products in Rx band (dBm)
Frequency range (MHz)
Bandwidth (MHz)
Return loss(dB)
Insertion loss in by-pass mode (dB)
Gain (dB)
Noise figure** (dB)
2110 - 2170
60
Avg. < 0.3
≥ 18
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
≤ -122 (2 TX carriers at +43 dBm)
Rx Specifications
1920 - 1980
60
≥ 18 (DC ON)
≥ 15 (DC OFF)
≤ 3.0 (DC OFF)
12 ±1
Avg. < 1.4 (+22 ... +28 ℃)
Output 1dB compression (dBm)
OIP3 (dBm)
≥ 12
≥ 24
Filter DCS1800 Specifications
Frequency range (MHz)
Bandwidth (MHz)
Insertion loss (dB)
Return loss (dB)
Input power (W)
Intermodulation products (dBm)
DC supply voltage (V)
Operating current per TMA (mA)
(without RET)
Alarm management (mA)
Power consumption (W)
1710 - 1880
170
≤ 0.4
≥ 18
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
≤ -117 (3rd order, 2 TX carriers at +43 dBm)
Electrical properties
CWA Mode
AISG Mode
8.5 - 15
8.5 - 30
40 - 120 (12 V DC)
40 - 370 (12 V DC)
150 - 280 (12 V DC)
AISG
< 3.5
Environmental Specification
Operating temperature range (℃)
IP rating
MTBF (hours)
EMC
Lightning protection (kA)
RF connectors
AISG connector
Mounting
Weight (kg)
Mast diameter (mm)
Dimensions (W x H x D) (mm)
Volume (L)
-40 .. +65
IP67
> 1,000,000
ETS 300 342-3
10 (8/20 us)
Mechanical Specification
4 x 7/16 DIN Female (Long neck)
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B,
pin5: RS485A, pin7: DC return, other pins: not connected)
Wall mounting // Mast mounting
≤ 6.5 (with brackets)
Default: 30 - 125 // Optional: 40 - 140
175 x 245 x 100 (without connectors, without brackets)
Approx. 4.3
RX
Hz
0M Hz
98
M
- 1 170
0
-2
92
: 1 110
:2
TX
0
20
DTMA21-020
Model: ATA212002 (AISG 2.0)
Preliminary Issue
Unit: mm
www.huawei.com
20
1
Issue: 2013-01-08
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
:1
: 2 920
11
-1
0
- 2 980
M
17
0M Hz
Hz
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
RX
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
TX
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DTMA21-021
Model: ATA212003 (AISG 2.0)
Preliminary Issue
Product Description
The dual tower mounted amplifier (DTMA) is a low-noise amplifier installed near the antenna. It helps to improve the
signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It enhances the uplink coverage and improves
uplink and downlink imbalance of the base station. It effectively reduces the transmitting power of cellphones, improves
voice and data communication quality.
Features
y High linearity and low noise performance.
y Power failure bypass for high reliability.
y Light weight and compact design.
y Wall mounting and mast mounting.
y Built-in lightning protection up to 10 kA.
y Support AISG 2.0 protocol.
Appearance and Block Diagram
RX
Hz
0M Hz
98
M
- 1 170
0
-2
92
: 1 110
:2
TX
2
20
DTMA21-021
Model: ATA212003 (AISG 2.0)
Preliminary Issue
Tx Specifications
Frequency range (MHz)
Bandwidth (MHz)
Insertion loss* (dB)
Return loss (dB)
Input power (W)
Intermodulation products in Rx band (dBm)
Frequency range (MHz)
Bandwidth (MHz)
Return loss(dB)
2110 - 2170
60
Avg. < 0.3
≥ 18
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
≤ -122 (2 TX carriers at +43 dBm)
Rx Specifications
1920 - 1980
60
≥ 18 (DC ON)
≥ 15 (DC OFF)
Insertion loss in by-pass mode (dB)
≤ 3.0 (DC OFF)
Gain (dB)
12 ±1
Noise figure** (dB)
Avg. < 1.3 (+22 ... +28 ℃)
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 24
Filter GSM900 Specifications
Frequency range (MHz)
Bandwidth (MHz)
Insertion loss (dB)
Return loss (dB)
Isolation (dB)
Input power (W)
Intermodulation products (dBm)
Frequency range (MHz)
Bandwidth (MHz)
Insertion loss (dB)
Return loss (dB)
Isolation (dB)
Input power (W)
Intermodulation products (dBm)
DC supply voltage (V)
Operating current per TMA (mA)
(without RET)
Alarm management (mA)
Power consumption (W)
880 - 960
80
< 0.3
≥ 18
> 45 (1710 - 1880 MHz // 1920 - 1980 MHz // 2110 - 2170 MHz)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
≤ -117 (3rd order, 2 TX carriers at +43 dBm)
Filter DCS1800 Specifications
1710 - 1880
170
≤ 0.4
≥ 18
> 45 (880 - 960 MHz // 1920 - 1980 MHz // 2110 - 2170 MHz)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
≤ -117 (3rd order; with 2 x 43dBm)
Electrical properties
CWA Mode
AISG Mode
8.5 - 15
8.5 - 30
40 - 120 (12 V DC)
40 - 370 (12 V DC)
150 - 280 (12 V DC)
AISG
< 3.5
Environmental Specification
20
3
RX
:1
: 2 920
11
-1
0
- 2 980
M
17
0M Hz
Hz
-40 .. +65
IP67
> 1,000,000
ETS 300 342-3
10 (8/20 us)
TX
Operating temperature range (℃)
IP rating
MTBF (hours)
EMC
Lightning protection (kA)
DTMA21-021
Model: ATA212003 (AISG 2.0)
Preliminary Issue
RF connectors
AISG connector
Mounting
Weight (kg)
Mechanical Specification
8 x 7/16 DIN Female (Long neck)
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B,
pin5: RS485A, pin7: DC return, other pins: not connected)
Wall mounting // Mast mounting
≤ 7 (with brackets)
Mast diameter (mm)
Dimensions (W x H x D) (mm)
Volume (L)
Default: 30 - 125 // Optional: 40 - 140
224 x 312 x 95 (without connectors, without brackets)
Approx. 4.7
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
RX
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
Hz
0M Hz
98
M
- 1 170
0
-2
92
: 1 110
:2
TX
4
20
MTMA18/21-026
Model: ATADU1102 (AISG 1.1)
MTMA18/21-027
Model: ATADU2002 (AISG 2.0)
Preliminary Issue
Product Description
The dual multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to satisfy the cositing purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It
enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the
transmitting power of cellphones, improves voice and data communication quality.
Features
y High linearity and low noise performance.
y Balanced LNA design and power failure bypass for high reliability.
y Light weight and compact design.
y Designed for co-siting purposes.
y Wall mounting and mast mounting.
y Built-in lightning protection up to 10 kA.
y Support AISG 1.1 and AISG 2.0 protocol.
20
5
TX
RX
:1
71
:1
80 0 1
5
- 1 785
/1
88
9
0/
21 20 10
1
- 2 980
M
17
0M Hz
Hz
Appearance and Block Diagram
MTMA18/21-026
Model: ATADU1102 (AISG 1.1)
MTMA18/21-027
Model: ATADU2002 (AISG 2.0)
Preliminary Issue
Tx Specifications
Frequency range (MHz)
1805 - 1880
2110 - 2170
Bandwidth (MHz)
75
60
Insertion loss* (dB)
Avg. < 0.5
Avg. < 0.3
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -110 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
Bandwidth (MHz)
1710 - 1785
2110 - 2170
75
60
≥ 18 (DC ON)
≥ 13 (DC OFF)
Return loss(dB)
Insertion loss in by-pass mode (dB)
Typ. < 3.0
Gain (dB)
12 ±1
Noise figure** (dB)
Avg. < 1.5
Avg. < 1.3
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 24
Electrical Specifications
DC supply voltage (V)
CWA Mode
AISG Mode
8.5 - 15
8.5 - 30
Operating current per TMA (mA)
(without RET)
40 - 110 (12 V DC)
40 - 370 (12 V DC)
Alarm management (mA)
150 - 280 (12 V DC)
AISG
Power consumption (W)
< 3.5
Environmental Specification
Operating temperature range (℃)
-40 .. +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
RF connectors
4 x 7/16 DIN Female (Long neck)
AISG connector
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B,
pin5: RS485A, pin7: DC return, other pins: not connected)
Mounting
Wall mounting // Mast mounting
Weight (kg)
≤ 7.5
Mast diameter (mm)
Dimensions (W x H x D) (mm)
Volume (L)
Default: 30 - 125 // Optional: 40 - 140
196 x 280 x 110 (without connectors, without brackets)
Approx. 5.9
RX
6
20
Hz
0M Hz
98
M
-1
70
20 - 21
19
10
5/
21
78
0/
-1
88
0
-1
71
5
:1
80
:1
TX
MTMA18/21-026
Model: ATADU1102 (AISG 1.1)
MTMA18/21-027
Model: ATADU2002 (AISG 2.0)
Preliminary Issue
Unit: mm
Issue: 2013-01-08
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
20
7
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
RX
:1
71
:1
80 0 1
5
- 1 785
/1
88
9
0/
21 20 10
1
- 2 980
M
17
0M Hz
Hz
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
TX
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
MTMA18/21-028
Model: ATADU1103 (AISG 1.1)
MTMA18/21-029
Model: ATADU2003 (AISG 2.0)
Preliminary Issue
Product Description
The dual multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to satisfy the cositing purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It
enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the
transmitting power of cellphones, improves voice and data communication quality.
Features
y High linearity and low noise performance.
y Balanced LNA design and power failure bypass for high reliability.
y Light weight and compact design.
y Designed for co-siting purposes.
y Wall mounting and mast mounting.
y Built-in lightning protection up to 10 kA.
y Support AISG 1.1 and AISG 2.0 protocol.
Appearance and Block Diagram
RX
8
20
Hz
0M Hz
98
M
-1
70
20 - 21
19
10
5/
21
78
0/
-1
88
0
-1
71
5
:1
80
:1
TX
MTMA18/21-028
Model: ATADU1103 (AISG 1.1)
MTMA18/21-029
Model: ATADU2003 (AISG 2.0)
Preliminary Issue
Tx Specifications
Frequency range (MHz)
1805 - 1880
2110 - 2170
Bandwidth (MHz)
75
60
Insertion loss* (dB)
Avg. < 0.5
Avg. < 0.3
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -110 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
Bandwidth (MHz)
1710 - 1785
2110 - 2170
75
60
≥ 18 (DC ON)
≥ 13 (DC OFF)
Return loss(dB)
Insertion loss in by-pass mode (dB)
Typ. < 3.0
Gain (dB)
12 ±1
Noise figure** (dB)
Avg. < 1.5
Avg. < 1.3
Output 1dB compression (dBm)
≥ 12
OIP3 (dBm)
≥ 24
Electrical Specifications
DC supply voltage (V)
CWA Mode
AISG Mode
8.5 - 15
8.5 - 30
Operating current per TMA (mA)
(without RET)
40 - 110 (12 V DC)
40 - 370 (12 V DC)
Alarm management (mA)
150 - 280 (12 V DC)
AISG
Power consumption (W)
< 3.5
Environmental Specification
Operating temperature range (℃)
-40 .. +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
RF connectors
6 x 7/16 DIN Female (Long neck)
AISG connector
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B,
pin5: RS485A, pin7: DC return, other pins: not connected)
Mounting
Wall mounting // Mast mounting
Weight (kg)
≤ 7.5
Approx. 5.9
20
9
:1
71
:1
80 0 1
5
- 1 785
/1
88
9
0/
21 20 10
1
- 2 980
M
17
0M Hz
Hz
Volume (L)
196 x 280 x 110 (without connectors, without brackets)
RX
Dimensions (W x H x D) (mm)
Default: 30 - 125 // Optional: 40 - 140
TX
Mast diameter (mm)
MTMA18/21-028
Model: ATADU1103 (AISG 1.1)
MTMA18/21-029
Model: ATADU2003 (AISG 2.0)
Preliminary Issue
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
RX
0
21
Hz
0M Hz
98
M
-1
70
20 - 21
19
10
5/
21
78
0/
-1
88
0
-1
71
5
:1
80
:1
TX
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
MTMA08/09-024
Model: ATADU1101 (AISG 1.1)
MTMA08/09-025
Model: ATADU2001 (AISG 2.0)
Preliminary Issue
Product Description
The dual multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to satisfy the cositing purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It
enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the
transmitting power of cellphones, improves voice and data communication quality.
Features
y High linearity and low noise performance.
y Balanced LNA design and power failure bypass for high reliability.
y Light weight and compact design.
y Designed for co-siting purposes.
y Wall mounting and mast mounting.
y Built-in lightning protection up to 10 kA.
y Support AISG 1.1 and AISG 2.0 protocol.
21
1
TX
RX
:8
: 7 32
91 - 8
- 8 62/
21 88
0
/9
25 - 9
- 9 05M
50
Hz
M
Hz
Appearance and Block Diagram
MTMA08/09-024
Model: ATADU1101 (AISG 1.1)
MTMA08/09-025
Model: ATADU2001 (AISG 2.0)
Preliminary Issue
Tx Specifications
Frequency range (MHz)
Bandwidth (MHz)
791 - 821
925 - 960
30
35
Insertion loss (dB)
Typ. < 0.4 (Max. 0.7 @ 65 ℃ )
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -110 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
Bandwidth (MHz)
832 - 862
880 - 915
30
35
≥ 18 (DC ON)
≥ 13 (DC OFF)
Return loss(dB)
Insertion loss in by-pass mode (dB)
Typ. < 3.0
Gain (dB)
12 ±1
Noise figure (dB)
Typ. < 1.1 (Max. 1.9 @ 65 ℃ )
Output 1dB compression (dBm)
≥8
OIP3 (dBm)
≥ 20
Electrical Specifications
CWA Mode
AISG Mode
8.5 - 15
8.5 - 30
Operating current per TMA (mA)
(without RET)
40 - 110 (12 V DC)
40 - 370 (12 V DC)
Alarm management (mA)
150 - 280 (12 V DC)
AISG
DC supply voltage (V)
Power consumption (W)
< 3.5
Environmental Specification
Operating temperature range (℃)
-40 .. +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
RF connectors
4 x 7/16 DIN Female (Long neck)
AISG connector
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B,
pin5: RS485A, pin7: DC return, other pins: not connected)
Mounting
Wall mounting // Mast mounting
Weight (kg)
≤ 11
Mast diameter (mm)
Dimensions (W x H x D) (mm)
RX
Volume (L)
Default: 30 - 125 // Optional: 40 - 140
247 x 342 x 132 (without connectors, without brackets)
Approx. 10.8
2
21
Hz
M
Hz
05
- 9 50M
80 - 9
/8
5
62 92
- 8 21/
32 - 8
: 8 91
:7
TX
MTMA08/09-024
Model: ATADU1101 (AISG 1.1)
MTMA08/09-025
Model: ATADU2001 (AISG 2.0)
Preliminary Issue
Unit: mm
Issue: 2013-01-08
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
21
3
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
RX
:8
: 7 32
91 - 8
- 8 62/
21 88
0
/9
25 - 9
- 9 05M
50
Hz
M
Hz
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
TX
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
MTMA08/09-030
Model: ATADU1105 (AISG 1.1)
MTMA08/09-031
Model: ATADU2005 (AISG 2.0)
Preliminary Issue
Product Description
The dual multiband tower mounted amplifier (MTMA) is a low-noise amplifier installed near the antenna to satisfy the cositing purposes. It helps to improve the signal-to-noise ratio and enhance the receiving sensibility of the BTS system. It
enhances the uplink coverage and improves uplink and downlink imbalance of the base station. It effectively reduces the
transmitting power of cellphones, improves voice and data communication quality.
Features
y High linearity and low noise performance.
y Balanced LNA design and power failure bypass for high reliability.
y Light weight and compact design.
y Designed for co-siting purposes.
y Wall mounting and mast mounting.
y Built-in lightning protection up to 10 kA.
y Support AISG 1.1 and AISG 2.0 protocol.
Appearance and Block Diagram
RX
4
21
Hz
M
Hz
05
- 9 50M
80 - 9
/8
5
62 92
- 8 21/
32 - 8
: 8 91
:7
TX
MTMA08/09-030
Model: ATADU1105 (AISG 1.1)
MTMA08/09-031
Model: ATADU2005 (AISG 2.0)
Preliminary Issue
Tx Specifications
Frequency range (MHz)
Bandwidth (MHz)
791 - 821
925 - 960
30
35
Insertion loss (dB)
Typ. < 0.4 (Max. 0.7 @ 65 ℃ )
Return loss (dB)
≥ 18
Input power (W)
< 160 (+52 dBm) CW
< 2000 (+63 dBm) peak
Intermodulation products in Rx band (dBm)
≤ -110 (2 TX carriers at +43 dBm)
Rx Specifications
Frequency range (MHz)
Bandwidth (MHz)
832 - 862
880 - 915
30
35
≥ 18 (DC ON)
≥ 13 (DC OFF)
Return loss(dB)
Insertion loss in by-pass mode (dB)
Typ. < 3.0
Gain (dB)
12 ±1
Noise figure (dB)
Typ. < 1.1 (Max. 1.9 @ 65 ℃ )
Output 1dB compression (dBm)
≥8
OIP3 (dBm)
≥ 20
Electrical Specifications
CWA Mode
AISG Mode
8.5 - 15
8.5 - 30
Operating current per TMA (mA)
(without RET)
40 - 110 (12 V DC)
40 - 370 (12 V DC)
Alarm management (mA)
150 - 280 (12 V DC)
AISG
DC supply voltage (V)
Power consumption (W)
< 3.5
Environmental Specification
Operating temperature range (℃)
-40 .. +65
IP rating
IP67
MTBF (hours)
> 1,000,000
EMC
ETS 300 342-3
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
RF connectors
6 x 7/16 DIN Female (Long neck)
AISG connector
8-pin female, IEC 60130-9 (pin1 & pin6: 8.5V - 30V DC, pin3: RS485B,
pin5: RS485A, pin7: DC return, other pins: not connected)
Mounting
Wall mounting // Mast mounting
Weight (kg)
≤ 11
Approx. 10.8
21
5
Volume (L)
247 x 342 x 132 (without connectors, without brackets)
RX
:8
: 7 32
91 - 8
- 8 62/
21 88
0
/9
25 - 9
- 9 05M
50
Hz
M
Hz
Dimensions (W x H x D) (mm)
Default: 30 - 125 // Optional: 40 - 140
TX
Mast diameter (mm)
MTMA08/09-030
Model: ATADU1105 (AISG 1.1)
MTMA08/09-031
Model: ATADU2005 (AISG 2.0)
Preliminary Issue
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
RX
6
21
Hz
M
Hz
05
- 9 50M
80 - 9
/8
5
62 92
- 8 21/
32 - 8
: 8 91
:7
TX
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DC-0023-2
Model: ACOMD2H09
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
21
7
Ba
Ba nd
nd 1 :
7
2
: 8 90
80 - 8
- 9 62M
60
Hz
M
Hz
ACOMD2H09
DC-0023-2
Model: ACOMD2H09
Electrical Properties
Model
ACOMD2H09
Band 1
790 - 862
Band 2
880 - 960
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
Typ. < 0.3 (790 MHz - 862 MHz)
Port 2 ←→ Port 3
Typ. < 0.25 (880 MHz - 960 MHz)
Port 1 ←→ Port 3
Stop
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Isolation (dB)
> 50
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 200
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 180 x 210 x 107
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
260 x 365 x 210
Combiner weight (kg)
Double Unit: ≤ 6.8
Packing weight (kg)
≤ 7.8
Mounting
Mast diameter (mm)
Connector
Wall mounting // Mast mounting
Default: 40 - 135
7/16 DIN Female (Long neck)
8
21
Hz
M
Hz
62
- 8 60M
90 - 9
: 7 80
1
8
nd 2 :
Ba nd
Ba
DC-0023-2
Model: ACOMD2H09
Unit: mm
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
21
9
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Ba
Ba nd
nd 1 :
7
2
: 8 90
80 - 8
- 9 62M
60
Hz
M
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DC-0013-2
Model: ACOMD2H04
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
ACOMD2H04
0
22
Hz
M
Hz
62
- 8 60M
90 - 9
: 7 80
1
8
nd 2 :
Ba nd
Ba
DC-0013-2
Model: ACOMD2H04
Electrical Properties
Model
ACOMD2H04
Band 1
790 - 862
Band 2
880 - 960
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
Typ. < 0.3 (790 MHz - 862 MHz)
Port 2 ←→ Port 3
Typ. < 0.25 (880 MHz - 960 MHz)
Port 1 ←→ Port 3
Stop
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Isolation (dB)
> 50
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 200
< -117 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 180 x 210 x 107
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
260 x 365 x 210
Combiner weight (kg)
Double Unit: ≤ 6.8
Packing weight (kg)
≤ 7.8
Connector
Default: 40 - 135
7/16 DIN Female (Long neck)
22
1
Mast diameter (mm)
Wall mounting // Mast mounting
Ba
Ba nd
nd 1 :
7
2
: 8 90
80 - 8
- 9 62M
60
Hz
M
Hz
Mounting
DC-0013-2
Model: ACOMD2H04
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
2
22
Hz
M
Hz
62
- 8 60M
90 - 9
: 7 80
1
8
nd 2 :
Ba nd
Ba
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DC-0037-2
Model: ACOMD2H18
Preliminary Issue
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes.
y Feeder sharing available.
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
22
3
Ba
Ba nd
nd 1 :
7
2
: 8 90
80 - 8
- 9 62M
60
Hz
M
Hz
ACOMD2H18
DC-0037-2
Model: ACOMD2H18
Preliminary Issue
Electrical Properties
Model
ACOMD2H18
Band 1
790 - 862
Band 2
880 - 960
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
< 0.3 (790 MHz - 862 MHz)
Port 2 ←→ Port 3
< 0.25 (880 MHz - 960 MHz)
Port 1 ←→ Port 3
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Isolation (dB)
> 50
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 200
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 180 x 210 x 107
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
260 x 365 x 210
Combiner weight (kg)
Double Unit: ≤ 6.8
Packing weight (kg)
≤ 7.8
Mounting
Mast diameter (mm)
Connector
Wall mounting // Mast mounting
Default: 40 - 135
7/16 DIN Female (Long neck)
4
22
Hz
M
Hz
62
- 8 60M
90 - 9
: 7 80
1
8
nd 2 :
Ba nd
Ba
DC-0037-2
Model: ACOMD2H18
Preliminary Issue
Unit: mm
Issue: 2013-01-08
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
5
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
22
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Ba
Ba nd
nd 1 :
7
2
: 8 90
80 - 8
- 9 62M
60
Hz
M
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DC-0029-2
Model: ACOMD2H15
Preliminary Issue
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes.
y Feeder sharing available.
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
ACOMD2H15
6
22
Hz
M
Hz
62
- 8 60M
90 - 9
: 7 80
1
8
nd 2 :
Ba nd
Ba
DC-0029-2
Model: ACOMD2H15
Preliminary Issue
Electrical Properties
Model
ACOMD2H15
Band 1
790 - 862
Band 2
880 - 960
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
< 0.3 (790 MHz - 862 MHz)
Port 2 ←→ Port 3
< 0.25 (880 MHz - 960 MHz)
Port 1 ←→ Port 3
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Isolation (dB)
> 50
VSWR
< 1.24
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 200
< -117 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Connector
7/16 female (long neck)
Mounting
Wall mounting // Mast mounting
Weight (kg)
Double Unit: ≤ 7
Mast diameter (mm)
Default: 40 - 135
Double Unit: 180 x 210 x 107
(without connectors, without mounting brackets)
22
7
Ba
Ba nd
nd 1 :
7
2
: 8 90
80 - 8
- 9 62M
60
Hz
M
Hz
Dimensions (W x H x D) (mm)
DC-0029-2
Model: ACOMD2H15
Preliminary Issue
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
8
22
Hz
M
Hz
62
- 8 60M
90 - 9
: 7 80
1
8
nd 2 :
Ba nd
Ba
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DC-0027-2
Model: ACOMD2H14
Preliminary Issue
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes.
y Feeder sharing available.
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
22
9
Ba
Ba nd
1
nd
:7
2
: 8 90
-8
80
- 2 62
20 MH
0M z
Hz
ACOMD2H14
DC-0027-2
Model: ACOMD2H14
Preliminary Issue
Electrical Properties
Model
ACOMD2H14
Band 1
790 - 862
Band 2
880 - 2200
Pass band (MHz)
Port 1 ←→ Port 3
Insertion loss* (dB)
< 0.25 (880 MHz - 960 MHz)
Port 2 ←→ Port 3
DC/AISG transparency
Isolation (dB)
< 0.3 (790 MHz - 862 MHz)
< 0.15 (1710 MHz - 2200 MHz)
Port 1 ←→ Port 3
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Port 1 ←→ Port 2
> 50
VSWR
Input power (W)
< 1.24
Port 1, Port 2
Intermodulation products (dBm)
< 300
< -117 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Connector
7/16 female (long neck)
Mounting
Wall mounting // Mast mounting
Weight (kg)
Double Unit: ≤ 7.5
Mast diameter (mm)
Default: 40 - 135
Dimensions (W x H x D) (mm)
Double Unit: 220 x 210 x 115
(without connectors, without mounting brackets)
0
23
Hz
z
M
62 MH
- 8 00
90
22
:7 01
8
:8
nd
Ba d 2
n
Ba
DC-0027-2
Model: ACOMD2H14
Preliminary Issue
Unit: mm
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
23
1
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Ba
Ba nd
1
nd
:7
2
: 8 90
-8
80
- 2 62
20 MH
0M z
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DC-0019-2
Model: ACOMD2H11
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
ACOMD2H11
2
23
Hz z
M
H
60
M
- 9 200
98 - 2
: 6 10
1
7
nd
:1
Ba d 2
n
Ba
DC-0019-2
Model: ACOMD2H11
Electrical Properties
Model
ACOMD2H11
Band 1
698 - 960
Band 2
1710 - 2200
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
Typ. < 0.15 (698 MHz - 960 MHz)
Port 2 ←→ Port 3
Typ. < 0.15 (1710 MHz - 2200 MHz)
Port 1 ←→ Port 3
Stop
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Isolation (dB)
> 40
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 300
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 130 x 190 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
265 x 415 x 245
Combiner weight (kg)
Double Unit: ≤ 4.3
Packing weight (kg)
≤ 5.4
Connector
Default: 40 - 135
7/16 DIN Female (Long neck)
23
3
Mast diameter (mm)
Wall mounting // Mast mounting
B
Ba and
nd
1
:
2
: 1 698
71
-9
0
- 2 60M
20
H
0M z
Hz
Mounting
DC-0019-2
Model: ACOMD2H11
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
4
23
Hz z
M
H
60
M
- 9 200
98 - 2
: 6 10
1
7
nd
:1
Ba d 2
n
Ba
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DC-0017-2
Model: ACOMD2H10
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
23
5
B
Ba and
nd
1
:
2
: 1 698
71
-9
0
- 2 60M
20
H
0M z
Hz
ACOMD2H10
DC-0017-2
Model: ACOMD2H10
Electrical Properties
Model
ACOMD2H10
Band 1
698 - 960
Band 2
1710 - 2200
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
Typ. < 0.15 (698 MHz - 960 MHz)
Port 2 ←→ Port 3
Typ. < 0.15 (1710 MHz - 2200 MHz)
Port 1 ←→ Port 3
Stop
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Isolation (dB)
> 40
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 300
< -117 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 130 x 190 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
265 x 415 x 245
Combiner weight (kg)
Double Unit: ≤ 4.3
Packing weight (kg)
≤ 5.4
Mounting
Mast diameter (mm)
Connector
Wall mounting // Mast mounting
Default: 40 - 135
7/16 DIN Female (Long neck)
6
23
Hz z
M
H
60
M
- 9 200
98 - 2
: 6 10
1
7
nd
:1
Ba d 2
n
Ba
DC-0017-2
Model: ACOMD2H10
Unit: mm
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
23
7
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
B
Ba and
nd
1
:
2
: 1 698
71
-9
0
- 2 60M
20
H
0M z
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DC-0038-2
Model: ACOMD2H19
Preliminary Issue
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes.
y Feeder sharing available.
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
ACOMD2H19
8
23
Hz z
M
H
60
M
- 9 200
98 - 2
: 6 10
1
7
nd
:1
Ba d 2
n
Ba
DC-0038-2
Model: ACOMD2H19
Preliminary Issue
Electrical Properties
Model
ACOMD2H19
Band 1
698 - 960
Band 2
1710 - 2200
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
< 0.15 (698 MHz - 960 MHz)
Port 2 ←→ Port 3
< 0.15 (1710 MHz - 2200 MHz)
Port 1 ←→ Port 3
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Isolation (dB)
> 40
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 300
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 130 x 190 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
265 x 415 x 245
Combiner weight (kg)
Double Unit: ≤ 4.3
Packing weight (kg)
≤ 5.4
Connector
Default: 40 - 135
7/16 DIN Female (Long neck)
23
9
Mast diameter (mm)
Wall mounting // Mast mounting
B
Ba and
nd
1
:
2
: 1 698
71
-9
0
- 2 60M
20
H
0M z
Hz
Mounting
DC-0038-2
Model: ACOMD2H19
Preliminary Issue
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
0
24
Hz z
M
H
60
M
- 9 200
98 - 2
: 6 10
1
7
nd
:1
Ba d 2
n
Ba
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DC-0020-2
Model: ACOMD2H13
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
24
1
B
Ba and
nd
1
:
2
: 2 698
49
-9
0
- 2 60M
70
H
0M z
Hz
ACOMD2H13
DC-0020-2
Model: ACOMD2H13
Electrical Properties
Model
ACOMD2H12
Band 1
698 - 960
Band 2
2490 - 2700
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
Typ. < 0.15 (698 MHz - 960 MHz)
Port 2 ←→ Port 3
Typ. < 0.15 (2490 MHz - 2700 MHz)
Port 1 ←→ Port 3
Stop
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 300
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 130 x 190 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
265 x 415 x 245
Combiner weight (kg)
Double Unit: ≤ 4.3
Packing weight (kg)
≤ 5.4
Mounting
Mast diameter (mm)
Connector
Wall mounting // Mast mounting
Default: 40 - 135
7/16 DIN Female (Long neck)
2
24
Hz z
M
H
60
M
- 9 700
98 - 2
: 6 90
1
4
nd
:2
Ba d 2
n
Ba
DC-0020-2
Model: ACOMD2H13
Unit: mm
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
24
3
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
B
Ba and
nd
1
:
2
: 2 698
49
-9
0
- 2 60M
70
H
0M z
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DC-0018-2
Model: ACOMD2H12
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
ACOMD2H12
4
24
Hz z
M
H
60
M
- 9 700
98 - 2
: 6 90
1
4
nd
:2
Ba d 2
n
Ba
DC-0018-2
Model: ACOMD2H12
Electrical Properties
Model
ACOMD2H12
Band 1
698 - 960
Band 2
2490 - 2700
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
Typ. < 0.15 (698 MHz - 960 MHz)
Port 2 ←→ Port 3
Typ. < 0.15 (2490 MHz - 2700 MHz)
Port 1 ←→ Port 3
Stop
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 300
< -117 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 130 x 190 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
265 x 415 x 245
Combiner weight (kg)
Double Unit: ≤ 4.3
Packing weight (kg)
≤ 5.4
Connector
Default: 40 - 135
7/16 DIN Female (Long neck)
24
5
Mast diameter (mm)
Wall mounting // Mast mounting
B
Ba and
nd
1
:
2
: 2 698
49
-9
0
- 2 60M
70
H
0M z
Hz
Mounting
DC-0018-2
Model: ACOMD2H12
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
6
24
Hz z
M
H
60
M
- 9 700
98 - 2
: 6 90
1
4
nd
:2
Ba d 2
n
Ba
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DC-0039-2
Model: ACOMD2H20
Preliminary Issue
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes.
y Feeder sharing available.
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
24
7
B
Ba and
nd
1
:
2
: 2 698
49
-9
0
- 2 60M
70
H
0M z
Hz
ACOMD2H20
DC-0039-2
Model: ACOMD2H20
Preliminary Issue
Electrical Properties
Model
ACOMD2H20
Band 1
698 - 960
Band 2
2490 - 2700
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
< 0.15 (698 MHz - 960 MHz)
Port 2 ←→ Port 3
< 0.15 (2490 MHz - 2700 MHz)
Port 1 ←→ Port 3
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 300
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 130 x 190 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
265 x 415 x 245
Combiner weight (kg)
Double Unit: ≤ 4.3
Packing weight (kg)
≤ 5.4
Mounting
Mast diameter (mm)
Connector
Wall mounting // Mast mounting
Default: 40 - 135
7/16 DIN Female (Long neck)
8
24
Hz z
M
H
60
M
- 9 700
98 - 2
: 6 90
1
4
nd
:2
Ba d 2
n
Ba
DC-0039-2
Model: ACOMD2H20
Preliminary Issue
Unit: mm
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
24
9
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
B
Ba and
nd
1
:
2
: 2 698
49
-9
0
- 2 60M
70
H
0M z
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DC-0010-2
Model: ACOMD2H00
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
ACOMD2H00
0
25
Hz z
M
H
60
M
- 9 700
98 - 2
: 6 10
1
7
nd
:1
Ba d 2
n
Ba
DC-0010-2
Model: ACOMD2H00
Electrical Properties
Model
ACOMD2H00
Band 1
698 - 960
Band 2
1710 - 2700
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
Typ. < 0.2 (698 MHz - 960 MHz)
Port 2 ←→ Port 3
Typ. < 0.25 (1710 MHz - 2700 MHz)
Port 1 ←→ Port 3
Stop
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Isolation (dB)
> 40
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 300
< -117 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 130 x 190 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
265 x 415 x 245
Combiner weight (kg)
Double Unit: ≤ 4.3
Packing weight (kg)
≤ 5.4
Connector
Default: 40 - 135
7/16 DIN Female (Long neck)
25
1
Mast diameter (mm)
Wall mounting // Mast mounting
B
Ba and
nd
1
:
2
: 1 698
71
-9
0
- 2 60M
70
H
0M z
Hz
Mounting
DC-0010-2
Model: ACOMD2H00
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
2
25
Hz z
M
H
60
M
- 9 700
98 - 2
: 6 10
1
7
nd
:1
Ba d 2
n
Ba
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DC-0003-2
Model: ACOMD2H02
Preliminary Issue
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
25
3
Ba
Ba nd
1
nd
:7
2
: 1 90
-1
92
8
0
- 2 80
20 MH
0M z
Hz
ACOMD2H02
DC-0003-2
Model: ACOMD2H02
Preliminary Issue
Electrical Properties
Model
ACOMD2H02
Band 1
790 - 1880
Band 2
1920 - 2200
Pass band (MHz)
Typ. < 0.15 (790 MHz - 960 MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
Typ. < 0.25 (1710 MHz - 1880 MHz)
Port 2 ←→ Port 3
Typ. < 0.25 (1920 MHz - 2200 MHz)
Port 1 ←→ Port 3
Stop
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
< 300
Port 1, Port 2
Intermodulation products (dBm)
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Connector
7/16 DIN Female (long neck)
Mounting
Wall mounting // Mast mounting
Weight (kg)
Double Unit: ≤ 6
Mast diameter (mm)
Dimensions (W x H x D) (mm)
40 - 135
Double Unit: 190 x 154 x 105
(without connectors, without mounting brackets)
4
25
Hz
0M Hz
88 0M
- 1 20
90
-2
: 7 20
1
9
:1
nd
Ba d 2
n
Ba
DC-0003-2
Model: ACOMD2H02
Preliminary Issue
Unit: mm
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
25
5
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Ba
Ba nd
1
nd
:7
2
: 1 90
-1
92
8
0
- 2 80
20 MH
0M z
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DC-0040-2
Model: ACOMD2H21
Preliminary Issue
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes.
y Feeder sharing available.
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
ACOMD2H21
6
25
Hz
0M Hz
88 0M
- 1 20
90
-2
: 7 20
1
9
:1
nd
Ba d 2
n
Ba
DC-0040-2
Model: ACOMD2H21
Preliminary Issue
Electrical Properties
Model
ACOMD2H21
Band 1
790 - 1880
Band 2
1920 - 2200
Pass band (MHz)
< 0.15 (790 MHz - 960 MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
< 0.25 (1710 MHz -1880 MHz)
Port 2 ←→ Port 3
< 0.25 (1920 MHz - 2200 MHz)
Port 1 ←→ Port 3
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 300
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 190 x 154 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
365 x 260 x 210
Combiner weight (kg)
Double Unit: ≤ 5.5
Packing weight (kg)
≤ 6.4
Connector
Default: 40 - 135
7/16 DIN Female (Long neck)
25
7
Mast diameter (mm)
Wall mounting // Mast mounting
Ba
Ba nd
1
nd
:7
2
: 1 90
-1
92
8
0
- 2 80
20 MH
0M z
Hz
Mounting
DC-0040-2
Model: ACOMD2H21
Preliminary Issue
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Hz
0M Hz
88 0M
- 1 20
90
-2
: 7 20
1
9
:1
nd
Ba d 2
n
Ba
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
8
25
DC-0026-2
Model: ACOMD2H06
DC-0022-2
Model: ACOMD2H08
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
ACOMD2H08
25
9
Ba
Ba nd
nd 1 :
1
2
: 1 710
92
-1
0
- 2 880
M
20
0M Hz
Hz
ACOMD2H06
DC-0026-2
Model: ACOMD2H06
DC-0022-2
Model: ACOMD2H08
Electrical Properties
Model
ACOMD2H06
ACOMD2H08
Band 1
1710 - 1880
Band 2
1920 - 2200
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
Typ. < 0.25 (1710 MHz - 1880 MHz)
Port 2 ←→ Port 3
Typ. < 0.25 (1920 MHz - 2200 MHz)
Port 1 ←→ Port 3
Stop
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 300
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 160 x 154 x 103
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
365 x 260 x 210
Combiner weight (kg)
Double Unit: ≤ 4.8
Packing weight (kg)
≤ 5.7
Mounting
Mast diameter (mm)
Connector
Wall mounting // Mast mounting
Default: 40 - 135
7/16 DIN Female (Long neck)
0
26
Hz
0M Hz
88
M
- 1 200
0
-2
71
: 1 920
1
1
nd 2 :
Ba nd
Ba
DC-0026-2
Model: ACOMD2H06
DC-0022-2
Model: ACOMD2H08
Unit: mm
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
26
1
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Ba
Ba nd
nd 1 :
1
2
: 1 710
92
-1
0
- 2 880
M
20
0M Hz
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DC-0012-2
Model: ACOMD2H05
DC-0021-2
Model: ACOMD2H07
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
ACOMD2H05
ACOMD2H07
2
26
Hz
0M Hz
88
M
- 1 200
0
-2
71
: 1 920
1
1
nd 2 :
Ba nd
Ba
DC-0012-2
Model: ACOMD2H05
DC-0021-2
Model: ACOMD2H07
Electrical Properties
Model
ACOMD2H05
ACOMD2H07
Band 1
1710 - 1880
Band 2
1920 - 2200
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
Typ. < 0.25 (1710 MHz - 1880 MHz)
Port 2 ←→ Port 3
Typ. < 0.25 (1920 MHz - 2200 MHz)
Port 1 ←→ Port 3
Stop
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 300
< -117 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 160 x 154 x 103
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
365 x 260 x 210
Combiner weight (kg)
Double Unit: ≤ 4.8
Packing weight (kg)
≤ 5.7
Connector
Default: 40 - 135
7/16 DIN Female (Long neck)
26
3
Mast diameter (mm)
Wall mounting // Mast mounting
Ba
Ba nd
nd 1 :
1
2
: 1 710
92
-1
0
- 2 880
M
20
0M Hz
Hz
Mounting
DC-0012-2
Model: ACOMD2H05
DC-0021-2
Model: ACOMD2H07
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Hz
0M Hz
88
M
- 1 200
0
-2
71
: 1 920
1
1
nd 2 :
Ba nd
Ba
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
4
26
DC-0024-2
Model: ACOMD2L04
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
26
5
Ba
Ba nd
nd 1 :
1
2
: 2 710
49
-2
0
- 2 200
M
70
0M Hz
Hz
ACOMD2L04
DC-0024-2
Model: ACOMD2L04
Electrical Properties
Model
ACOMD2L04
Band 1
1710 - 2200
Band 2
2490 - 2700
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
Typ. < 0.15 (1710 MHz - 2200 MHz)
Port 2 ←→ Port 3
Typ. < 0.15 (2490 MHz - 2700 MHz)
Port 1 ←→ Port 3
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
Stop
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 300
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 126 x 102 x 103
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
365 x 260 x 210
Combiner weight (kg)
Double Unit: ≤ 3.2
Packing weight (kg)
≤ 4.2
Mounting
Mast diameter (mm)
Connector
Wall mounting // Mast mounting
Default: 40 - 135
7/16 DIN Female (Long neck)
6
26
Hz
0M Hz
20
M
- 2 700
0
-2
71
: 1 490
1
2
nd 2 :
Ba nd
Ba
DC-0024-2
Model: ACOMD2L04
Unit: mm
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
7
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
26
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Ba
Ba nd
nd 1 :
1
2
: 2 710
49
-2
0
- 2 200
M
70
0M Hz
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DC-0006-2
Model: ACOMD2L03
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
ACOMD2L03
8
26
Hz
0M Hz
20
M
- 2 700
0
-2
71
: 1 490
1
2
nd 2 :
Ba nd
Ba
DC-0006-2
Model: ACOMD2L03
Electrical Properties
Model
ACOMD2L03
Band 1
1710 - 2200
Band 2
2490 - 2700
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
Typ. < 0.15 (1710 MHz - 2200 MHz)
Port 2 ←→ Port 3
Typ. < 0.15 (2490 MHz - 2700 MHz)
Port 1 ←→ Port 3
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
Stop
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 300
< -117 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 126 x 102 x 103
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
365 x 260 x 210
Combiner weight (kg)
Double Unit: ≤ 3.2
Packing weight (kg)
≤ 4.2
Connector
Default: 40 - 135
7/16 DIN Female (Long neck)
26
9
Mast diameter (mm)
Wall mounting // Mast mounting
Ba
Ba nd
nd 1 :
1
2
: 2 710
49
-2
0
- 2 200
M
70
0M Hz
Hz
Mounting
DC-0006-2
Model: ACOMD2L03
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Hz
0M Hz
20
M
- 2 700
0
-2
71
: 1 490
1
2
nd 2 :
Ba nd
Ba
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
0
27
DC-0034-2
Model: ACOMD2H16
Preliminary Issue
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes.
y Feeder sharing available.
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
27
1
Ba
Ba nd
nd 1 :
1
2
: 2 710
49
-2
0
- 2 200
M
70
0M Hz
Hz
ACOMD2H16
DC-0034-2
Model: ACOMD2H16
Preliminary Issue
Electrical Properties
Model
ACOMD2H16
Band 1
1710 - 2200
Band 2
2490 - 2700
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 1 ←→ Port 3
< 0.15 (1710 MHz - 2200 MHz)
Port 2 ←→ Port 3
< 0.15 (2490 MHz - 2700 MHz)
Port 1 ←→ Port 3
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
By-pass (max. 2500 mA)
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 300
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 126 x 102 x 103
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
365 x 260 x 210
Combiner weight (kg)
Double Unit: ≤ 3.2
Packing weight (kg)
≤ 4.2
Mounting
Mast diameter (mm)
Connector
Wall mounting // Mast mounting
Default: 40 - 135
7/16 DIN Female (Long neck)
2
27
Hz
0M Hz
20
M
- 2 700
0
-2
71
: 1 490
1
2
nd 2 :
Ba nd
Ba
DC-0034-2
Model: ACOMD2H16
Preliminary Issue
Unit: mm
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
27
3
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Ba
Ba nd
nd 1 :
1
2
: 2 710
49
-2
0
- 2 200
M
70
0M Hz
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DC-0030-2
Model: ACOMD2L05
Preliminary Issue
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes.
y Feeder sharing available.
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
nd
Ba
ACOMD2L05
1
4
27
Hz
0M
66
-2 z
20 MH
5
26
0/ 259
54
- 2 75
5
0
:2
50
:2 d2
n
Ba
DC-0030-2
Model: ACOMD2L05
Preliminary Issue
Electrical Properties
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Band 1
2500 - 2540
Band 2
2620 - 2660
Band 3
2575 - 2595
Band 1
< 0.6 (2500 MHz - 2540 MHz)
Band 2
< 0.6 (2620 MHz - 2660 MHz)
Band 3
< 0.65 (2575 MHz - 2595 MHz)
Port 1 ←→ Port 3
By-pass (max. 2500 mA)
Port 2 ←→ Port 3
Stop
Isolation (dB)
< 60
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Intermodulation products (dBm)
< 250
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Connector
7/16 DIN Female (Long neck)
Mounting
Wall mounting // Mast mounting
Weight (kg)
Double Unit: ≤ 7.8
Mast diameter (mm)
Default: 40 - 135
27
5
1
:
Ba 250
0
nd
-2
2
: 2 54
57 0/2
5
6
- 2 20
59
5M 266
Hz 0M
Hz
Double Unit: 250 x 176 x 103
(without connectors, without mounting brackets)
Ba
nd
Dimensions (W x H x D) (mm)
DC-0030-2
Model: ACOMD2L05
Preliminary Issue
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
nd
Ba
Any previous catalogue issues become invalid.
1
6
27
Hz
0M
66
-2 z
20 MH
5
26
0/ 259
54
- 2 75
5
0
:2
50
:2 d2
n
Ba
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
4-DC-X0Y0-WL1
Model: ACOMD2H25
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes.
y Feeder sharing available.
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
27
7
Ba
Ba nd
nd 1 :
2
2
: 2 614
58
-2
2
- 2 624
M
60
2M Hz
Hz
4-DC-X0Y0-WL1
4-DC-X0Y0-WL1
Model: ACOMD2H25
Electrical Properties
Model
ACOMD2H25
Band LTE TDD
2582 - 2602
Band WiMAX
2614 - 2624
Pass band (MHz)
Port LTE TDD ←→ Port COM
< 0.15 (790 MHz - 960 MHz)
Port WiMAX ←→ Port COM
< 0.25 (1710 MHz - 1880 MHz)
Port LTE TDD ←→ Port COM
Stop
Port WiMAX ←→ Port COM
Stop
Insertion loss* (dB)
DC/AISG transparency
Isolation (dB)
> 30
VSWR
< 1.25
Input power (W)
Port LTE TDD, Port WiMAX
Intermodulation products (dBm)
< 60
< -97 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
361 x 158.2 x 120
(with connectors, with mounting brackets)
Packing dimensions (W x H x D) (mm)
485 x 440 x 242
Combiner weight (kg)
≤ 5.7
Packing weight (kg)
≤ 7.0
Mounting
Mast diameter (mm)
Connector
Wall mounting // Mast mounting
Default: 30 - 127
N-Female
8
27
Hz
4M Hz
62
M
- 2 602
4
-2
61
: 2 582
1
2
nd 2 :
Ba nd
Ba
4-DC-X0Y0-WL1
Model: ACOMD2H25
Unit: mm
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
27
9
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Ba
Ba nd
nd 1 :
2
2
: 2 614
58
-2
2
- 2 624
M
60
2M Hz
Hz
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
TC-0028-2
Model: ACOMT2H04
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes.
y Feeder sharing available.
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
ACOMT2H04
0
28
Hz
M Hz z
60 M H
- 9 960 00M
90 - 2
: 7 80 - 2
1 : 8 10
nd 2 17
Ba and 3 :
B nd
Ba
TC-0028-2
Model: ACOMT2H04
Electrical Properties
Model
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
Isolation (dB)
ACOMT2H04
Band 1
790 - 862
Band 2
880 - 960
Band 3
1710 - 2200
Port 1 ←→ Port 4
< 0.3 (790 MHz - 862 MHz)
Port 2 ←→ Port 4
< 0.25 (880 MHz - 960 MHz)
Port 3 ←→ Port 4
< 0.15 (1710 MHz - 2200 MHz)
Port 1 ←→ Port 4
By-pass (max. 2500 mA)
Port 2 ←→ Port 4
By-pass (max. 2500 mA)
Port 3 ←→ Port 4
By-pass (max. 2500 mA)
Port 1 ←→ Port 2
> 50
Port 2 ←→ Port 3
> 70
Port 1 ←→ Port 3
> 70
VSWR
Input power (W)
< 1.24
Port 1, Port 2, Port3
Intermodulation products (dBm)
< 300
< -117 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Connector
7/16 DIN Female (Long neck)
Mounting
Wall mounting // Mast mounting
Weight (kg)
Double Unit: ≤ 7.5
Mast diameter (mm)
Default: 40 - 135
Double Unit: 220 x 210 x 115
(without connectors, without mounting brackets)
28
1
Ba
Ba Ban nd
nd d 1 :
3 2 : 790
: 1 88 71 0 9
0 - 9 60
- 2 60 M
20 M Hz
0M Hz
Hz
Dimensions (W x H x D) (mm)
TC-0028-2
Model: ACOMT2H04
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
2
28
Hz
M Hz z
60 M H
- 9 960 00M
90 - 2
: 7 80 - 2
1 : 8 10
nd 2 17
Ba and 3 :
B nd
Ba
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
TC-0011-2
Model: ACOMT2H00
TC-0015-2
Model: ACOMT2H02
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
ACOMT2H02
28
3
B Ba
Ba and nd
nd 2 1 :
3 : 1 790
: 1 71 92 0 9
0 - 1 60
- 2 88 M
20 0M Hz
0M H
Hz z
ACOMT2H00
TC-0011-2
Model: ACOMT2H00
TC-0015-2
Model: ACOMT2H02
Electrical Properties
Model
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
ACOMT2H00
ACOMT2H02
Band 1
790 - 960
Band 2
1710 - 1880
Band 3
1920 - 2200
Port 1 ←→ Port 4
Typ. < 0.15 (790 MHz - 960 MHz)
Port 2 ←→ Port 4
Typ. < 0.25 (1710 MHz - 1880 MHz)
Port 3 ←→ Port 4
Typ. < 0.25 (1920 MHz - 2200 MHz)
Port 1 ←→ Port 4
Stop
Stop
Port 2 ←→ Port 4
Stop
By-pass (max. 2500 mA)
Port 3 ←→ Port 4
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2, Port3
Intermodulation products (dBm)
< 300
< -117 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 190 x 154 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
365 x 260 x 210
Combiner weight (kg)
Double Unit: ≤ 6.3
Packing weight (kg)
≤ 7.3
Mounting
Mast diameter (mm)
Connector
Wall mounting // Mast mounting
Default: 40 - 135
7/16 DIN Female (Long neck)
4
28
Hz z
M H z
60 0M H
- 9 188 00M
90 - 2
: 7 10 - 2
1 17 20
nd 2 : 19
Ba nd 3 :
Ba and
B
TC-0011-2
Model: ACOMT2H00
TC-0015-2
Model: ACOMT2H02
Unit: mm
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
28
5
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
B Ba
Ba and nd
nd 2 1 :
3 : 1 790
: 1 71 92 0 9
0 - 1 60
- 2 88 M
20 0M Hz
0M H
Hz z
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
TC-0025-2
Model: ACOMT2H01
TC-0016-2
Model: ACOMT2H03
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
ACOMT2H01
ACOMT2H03
6
28
Hz z
M H z
60 0M H
- 9 188 00M
90 - 2
: 7 10 - 2
1 17 20
nd 2 : 19
Ba nd 3 :
Ba and
B
TC-0025-2
Model: ACOMT2H01
TC-0016-2
Model: ACOMT2H03
Electrical Properties
Model
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
ACOMT2H01
ACOMT2H03
Band 1
790 - 960
Band 2
1710 - 1880
Band 3
1920 - 2200
Port 1 ←→ Port 4
Typ. < 0.15 (790 MHz - 960 MHz)
Port 2 ←→ Port 4
Typ. < 0.25 (1710 MHz - 1880 MHz)
Port 3 ←→ Port 4
Typ. < 0.25 (1920 MHz - 2200 MHz)
Port 1 ←→ Port 4
Stop
Stop
Port 2 ←→ Port 4
Stop
By-pass (max. 2500 mA)
Port 3 ←→ Port 4
By-pass (max. 2500 mA)
By-pass (max. 2500 mA)
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2, Port3
Intermodulation products (dBm)
< 300
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 190 x 154 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
365 x 260 x 210
Combiner weight (kg)
Double Unit: ≤ 6.3
Packing weight (kg)
≤ 7.3
Connector
Default: 40 - 135
7/16 DIN Female (Long neck)
28
7
Mast diameter (mm)
Wall mounting // Mast mounting
B Ba
Ba and nd
nd 2 1 :
3 : 1 790
: 1 71 92 0 9
0 - 1 60
- 2 88 M
20 0M Hz
0M H
Hz z
Mounting
TC-0025-2
Model: ACOMT2H01
TC-0016-2
Model: ACOMT2H03
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
8
28
Hz z
M H z
60 0M H
- 9 188 00M
90 - 2
: 7 10 - 2
1 17 20
nd 2 : 19
Ba nd 3 :
Ba and
B
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
DC-0041-2
Model: ACOMT2H08
Preliminary Issue
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes.
y Feeder sharing available.
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
28
9
B Ba
Ba and nd
nd 2 1 :
3 : 1 790
: 1 71 92 0 9
0 - 1 60
- 2 88 M
20 0M Hz
0M H
Hz z
ACOMT2H08
DC-0041-2
Model: ACOMT2H08
Preliminary Issue
Electrical Properties
Model
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
ACOMT2H08
Band 1
790 - 960
Band 2
1710 - 1880
Band 3
1920 - 2200
Port 1 ←→ Port 4
< 0.15 (790 MHz - 960 MHz)
Port 2 ←→ Port 4
< 0.25 (1710 MHz - 1880 MHz)
Port 3 ←→ Port 4
< 0.25 (1920 MHz - 2200 MHz)
Port 1 ←→ Port 4
By-pass (max. 2500 mA)
Port 2 ←→ Port 4
By-pass (max. 2500 mA)
Port 3 ←→ Port 4
By-pass (max. 2500 mA)
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2, Port3
Intermodulation products (dBm)
< 300
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 190 x 154 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
365 x 260 x 210
Combiner weight (kg)
Double Unit: ≤ 6.3
Packing weight (kg)
≤ 7.3
Mounting
Mast diameter (mm)
Connector
Wall mounting // Mast mounting
Default: 40 - 135
7/16 DIN Female (Long neck)
0
29
Hz z
M H z
60 0M H
- 9 188 00M
90 - 2
: 7 10 - 2
1 17 20
nd 2 : 19
Ba nd 3 :
Ba and
B
DC-0041-2
Model: ACOMT2H08
Preliminary Issue
Unit: mm
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
29
1
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
B Ba
Ba and nd
nd 2 1 :
3 : 1 790
: 1 71 92 0 9
0 - 1 60
- 2 88 M
20 0M Hz
0M H
Hz z
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
TC-0009-2
Model: ACOMT2M00
Preliminary Issue
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
ACOMT2M00
2
29
Hz z
0M MH z
88 00 MH
- 1 22 00
90 0 - 27
:7 2 1 : 19 90
nd 2 24
Ba nd 3 :
Ba and
B
TC-0009-2
Model: ACOMT2M00
Preliminary Issue
Electrical Properties
Model
Pass band (MHz)
ACOMT2M00
Band 1
790 - 1880
Band 2
1920 - 2200
Band 3
2490 - 2700
Typ. < 0.15 (790 MHz - 960 MHz)
Port 1 ←→ Port 4
Typ. < 0.25 (1710 MHz - 1880 MHz)
Insertion loss* (dB)
DC/AISG transparency
Port 2 ←→ Port 4
Typ. < 0.25 (1920 MHz - 2200 MHz)
Port 3 ←→ Port 4
Typ. < 0.2 (2490 MHz - 2700 MHz)
Port 1 ←→ Port 4
Stop
Port 2 ←→ Port 4
By-pass (max. 2500 mA)
Port 3 ←→ Port 4
Stop
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2, Port3
Intermodulation products (dBm)
< 300
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Connector
7/16 DIN Female (long neck)
Mounting
Wall mounting // Mast mounting
Weight (kg)
Double Unit: ≤ 7
Double Unit: 215 x 200 x 105
(without connectors, without mounting brackets)
29
3
Dimensions (W x H x D) (mm)
40 - 135
B
B an
Ba and d 1
nd 2 : 7
3 : 1 90
: 2 92 49 0 18
0 - 2 80
- 2 20 M
70 0M Hz
0M H
Hz z
Mast diameter (mm)
TC-0009-2
Model: ACOMT2M00
Preliminary Issue
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
4
29
Hz z
0M MH z
88 00 MH
- 1 22 00
90 0 - 27
:7 2 1 : 19 90
nd 2 24
Ba nd 3 :
Ba and
B
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
TC-0043-2
Model: ACOMT2M09
Preliminary Issue
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes.
y Feeder sharing available.
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
29
5
B Ba
Ba and nd
nd 2 1 :
3 : 1 698
: 2 71 49 0 9
0 - 2 60
- 2 20 M
70 0M Hz
0M H
Hz z
ACOMT2M09
TC-0043-2
Model: ACOMT2M09
Preliminary Issue
Electrical Properties
Model
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
ACOMT2M09
Band 1
698 - 960
Band 2
1710 - 2200
Band 3
2490 - 2700
Port 1 ←→ Port 4
< 0.15 (698 MHz - 960 MHz)
Port 2 ←→ Port 4
< 0.25 (1710 MHz - 2200 MHz)
Port 3 ←→ Port 4
< 0.2 (2490 MHz - 2700 MHz)
Port 1 ←→ Port 4
By-pass (max. 2500 mA)
Port 2 ←→ Port 4
By-pass (max. 2500 mA)
Port 3 ←→ Port 4
By-pass (max. 2500 mA)
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2, Port3
Intermodulation products (dBm)
< 300
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 215 x 200 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
400 x 340 x 240
Combiner weight (kg)
Double Unit: ≤ 7.3
Packing weight (kg)
≤ 8.7
Mounting
Mast diameter (mm)
Connector
Wall mounting // Mast mounting
Default: 40 - 135
7/16 DIN Female (Long neck)
6
29
Hz z
M H z
60 0M H
- 9 220 00M
98 - 7
: 6 10 - 2
1 17 90
nd 2 : 24
Ba nd 3 :
Ba and
B
TC-0043-2
Model: ACOMT2M09
Preliminary Issue
Unit: mm
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
29
7
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
B Ba
Ba and nd
nd 2 1 :
3 : 1 698
: 2 71 49 0 9
0 - 2 60
- 2 20 M
70 0M Hz
0M H
Hz z
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
QC-0007-2
Model: ACOMQ2M00
Preliminary Issue
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes and feeder sharing
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
ACOMQ2M00
8
29
Hz z
M H z
60 0M H z
- 9 88 0M H
90 -1 20 0M
: 7 10 - 2 70
1 17 20 - 2
nd 2 : 19 90
Ba nd 3 : 24
:
Ba nd 4
Ba and
B
QC-0007-2
Model: ACOMQ2M00
Preliminary Issue
Electrical Properties
Model
ACOMQ2M00
Band 1
790 - 960
Band 2
1710 - 1880
Band 3
1920 - 2200
Band 4
2490 - 2700
Pass band (MHz)
Insertion loss* (dB)
Port 1 ←→ Port 5
Typ. < 0.15 (790 MHz - 960 MHz)
Port 2 ←→ Port 5
Typ. < 0.25 (1710 MHz - 1880 MHz)
Port 3 ←→ Port 5
Typ. < 0.25 (1920 MHz - 2200 MHz)
Port 4 ←→ Port 5
Typ. < 0.2 (2490 MHz - 2700 MHz)
Port 1 ←→ Port 5
Stop
Port 2 ←→ Port 5
Stop
Port 3 ←→ Port 5
By- pass (max. 2500 mA)
Port 4 ←→ Port 5
stop
DC/AISG transparency
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Port 3, Port 4
Intermodulation products (dBm)
< 300
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 .. +65
Application scene
Indoor // Outdoor
IP rating
IP67
Lightning protection (kA)
10 (8/20 us)
Mechanical Specification
Connector
7/16 DIN Female (long neck)
Mounting
Wall mounting // Mast mounting
Weight (kg)
Double Unit: ≤ 7.5
Double Unit: 215 x 200 x 105
(without connectors, without mounting brackets)
29
9
Dimensions (W x H x D) (mm)
40 - 135
B
B a
B an nd
Ba and d 2 1 :
nd 3 : 1 79
4 : 1 71 0 : 2 92 0 96
49 0 -18 0M
0 - 2 80 H
- 2 20 M z
70 0M H
0M H z
Hz z
Mast diameter (mm)
QC-0007-2
Model: ACOMQ2M00
Preliminary Issue
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
0
30
Hz z
M H z
60 0M H z
- 9 88 0M H
90 -1 20 0M
: 7 10 - 2 70
1 17 20 - 2
nd 2 : 19 90
Ba nd 3 : 24
:
Ba nd 4
Ba and
B
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
QC-0032-2
Model: ACOMQ2H00
Preliminary Issue
Product Description
y Built-in lightning protection up to 10 kA.
y Can be used as a combiner near the BTS or in a reciprocal
function near the antenna.
y Designed for co-siting purposes.
y Feeder sharing available.
y Suitable for indoor or outdoor applications.
y Wall or mast mounting.
Block Diagram
30
1
B
B a
B an nd
Ba and d 2 1 :
nd 3 : 1 79
4 : 1 71 0 : 2 92 0 96
49 0 -18 0M
0 - 2 80 H
- 2 20 M z
70 0M H
0M H z
Hz z
ACOMQ2H00
QC-0032-2
Model: ACOMQ2H00
Preliminary Issue
Electrical Properties
Model
Pass band (MHz)
Insertion loss* (dB)
DC/AISG transparency
ACOMQ2H00
Band 1
790 - 960
Band 2
1710 - 1880
Band 3
1920 - 2200
Band 4
2490 - 2700
Port 1 ←→ Port 5
< 0.15 (790 MHz - 960 MHz)
Port 2 ←→ Port 5
< 0.25 (1710 MHz - 1880 MHz)
Port 3 ←→ Port 5
< 0.25 (1920 MHz - 2200 MHz)
Port 4 ←→ Port 5
< 0.2 (2490 MHz - 2700 MHz)
Port 1 ←→ Port 5
By- pass (max. 2500 mA)
Port 2 ←→ Port 5
By- pass (max. 2500 mA)
Port 3 ←→ Port 5
By- pass (max. 2500 mA)
Port 4 ←→ Port 5
By- pass (max. 2500 mA)
Isolation (dB)
> 45
VSWR
< 1.28
Input power (W)
Port 1, Port 2
Port 3, Port 4
Intermodulation products (dBm)
< 300
< -110 (3rd order; with 2 x 43 dBm)
Environmental Specification
Operating temperature (℃)
-40 … +65
Application scene
Indoor // Outdoor
IP rating
IP67
10 (8/20 us)
Lightning protection (kA)
Mechanical Specification
Combiner dimensions (W x H x D) (mm)
Double Unit: 215 x 200 x 105
(without connectors, without mounting brackets)
Packing dimensions (W x H x D) (mm)
400 x 340 x 240
Combiner weight (kg)
Double Unit: ≤ 7.5
Packing weight (kg)
≤ 8.9
Mounting
Mast diameter (mm)
Connector
Wall mounting // Mast mounting
Default: 40 - 135
7/16 DIN Female (Long neck)
2
30
Hz z
M H z
60 0M H z
- 9 88 0M H
90 -1 20 0M
: 7 10 - 2 70
1 17 20 - 2
nd 2 : 19 90
Ba nd 3 : 24
:
Ba nd 4
Ba and
B
QC-0032-2
Model: ACOMQ2H00
Preliminary Issue
Unit: mm
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
30
3
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
B
B a
B an nd
Ba and d 2 1 :
nd 3 : 1 79
4 : 1 71 0 : 2 92 0 96
49 0 -18 0M
0 - 2 80 H
- 2 20 M z
70 0M H
0M H z
Hz z
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
DS-0042-1
Model: ADCSTOP00
Preliminary Issue
Features
y Used to isolate DC voltage from port 1 to port 2.
y Low passive intermodulation products, low insertion loss
and high power capacity.
y Ultra wide band design for various communication system.
y Small volume, light weight.
Dimension figure
ACOMQ2M00
4
30
Hz z
M H z
60 0M H z
- 9 88 0M H
90 -1 20 0M
: 7 10 - 2 70
1 17 20 - 2
nd 2 : 19 90
Ba nd 3 : 24
:
Ba nd 4
Ba and
B
DS-0042-1
Model: ADCSTOP00
Preliminary Issue
Electrical Properties
Model
ADCSTOP00
Frequency range (MHz)
698 - 2690
Insertion loss (dB)
Port 1 ←→ Port 2
≤ 0.1 (698 - 960 MHz // 1710 - 2690 MHz)
≤ 0.15 (960 - 1710 MHz)
Isolation for DC signal
(dB)
Port 1 ←→ Port 2
≥ 70
VSWR
Port 1 and Port 2
≤ 1.15 (698 - 960 MHz // 1710 - 2690 MHz)
≤ 1.2 (960 - 1710 MHz)
Input power (W)
Port 1 and Port 2
Avg. ≥ 500 (698 - 2690 MHz)
RF Impedance (Ω)
50
Intermodulation products (dBc)
< -160 (2 x 43 dBm carrier)
Environmental Specification
Operating temperature (℃)
-40 … +70
Application scene
Indoor // Outdoor
IP rating
IP66
Lightning protection (kA)
3 (10/350 us)
Mechanical Specification
BT Dimensions (W x H x D) (mm)
39 x 151 x 45
Packing dimensions (W x H x D) (mm)
78 x 185 x 58
BT net Weight (kg)
< 0.56
Packing weight (kg)
< 0.60
Port 1
7/16 DIN Male
Port 2
7/16 DIN Female
Connectors
Issue: 2013-01-08
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
30
5
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
D
: 6 C-S
98 TO
-2 P
70
0M
Hz
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Ba
nd
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
C
Accessories for
RET Systems
Antenna and RCU
configuration list
AISG 1.1
ARCU01104
AISG 2.0
ARCU02001
RCU
Antenna Model
Single Band
A90451704
A19452101
A19451703
AISG 1.1
ARCU01109
AISG 2.0
ARCU02004
A25451803
A25451804
RCU
A70451501
A70451600
A70451700
A70451500
A79451500v01
A79451600v01
A79451700v01
A19451505
A19451811
A194518R0
A26451500
A19451902
A26451800v01
A264518R0
A26451900v01
A25451805
A264518S0
ADU4515R0
ADU4516R0
ADU4517R0
ADU451503
ADU451602v01
ADU4518R3
ADU451807v01
ADU4518R0
ADU4517C0
ADU4518C1
ADU4518C0
ADU451820
ADU451821
ADU451716
ADU451604
ADU451611
ADU451712
ADU451819
ADU4518R1
ADU451902
ADU4518R5
ADU451507
ADU451816v01
ADU4518R6
ADU451901v01
ATR451500
ATR451602v01
ATR4516R0
ATR451704v01
ATR451612
ATR451713
ATR4517R0
ATR4518R4
ATR4518R7
ATR451709
ATR451606
ATR451607
ATR4518R9
ATR4518R3
ATR451714
Quad-band
AQU4518R0
AQU4518R1
Penta-band
APE4517R2
Single Band
Dual-band
30
7
Triple-band
RC
U
Antenna Model
RCU
Model: ARCU01104 (AISG 1.1)
ARCU02001 (AISG 2.0)
RCU (Remote Control Unit) drives the phase shifter in antenna through mechanical interface to change the electrical
downtilt. RCU is suitable for daisy chain solution.
Input voltage range (V)
DC 10 - 30
< 600 (motor activated)
< 50 (stand by)
Current (mA)
Adjustment time (full range) (min)
<2
Calibration time (min)
<4
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male // Daisy chain out: Female
Connectors
Pin assignment according AISG
1
2
3
4
5
DC
n/c
RS-485B
n/c
RS-485A
6
7
8
DC in/out DC return
n/c
Profile: Aluminium coated / Cover: Aluminium coated
Housing material
Color
Grey
Weight (g)
600
Operating temperature range (℃)
-40 .. +65
Protection class
IP24
Dimensions (L x W x H) (mm)
200 x 56 x 47
Packing size (L x W x H) (mm)
268 x 105 x 95
Daisy chain in: Male
Daisy chain out: Female
Drainage
Hole
Appearance
Drainage
Hole
Bottom view of RCU
Male
Female
HINT: Before the installation, check whether the RCU and base station support the same AISG protocol. If not, contact
the technical support personnel of Huawei.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
U
RC
8
30
RCU
Model: ARCU01109 (AISG 1.1)
ARCU02004 (AISG 2.0)
RCU (Remote Control Unit) drives the phase shifter in antenna through mechanical interface to change the electrical
downtilt. RCU is suitable for daisy chain solution.
Input voltage range (V)
DC 10 - 30
< 10 (motor activated)
< 0.5 (stand by)
Current (mA)
Adjustment time (full range) (min)
< 1.5 (typically, depending on antenna type)
Calibration time (min)
< 3 (typically, depending on antenna type)
Connectors
2 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
DC
n/c
Housing material
3
4
5
RS-485B
n/c
RS-485A
6
7
8
DC in/out DC return
n/c
Profile: Aluminium coated / Cover: Aluminium coated
Color
RAL 7035
Weight (g)
600
Operating temperature range (℃)
-40 .. +65
Protection class
IP24
AISG interface (each pin)
3 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
Dimensions (L x W x H) (mm)
180 x 65 x 54
Packing size (L x W x H) (mm)
268 x 105 x 95
HINT: Before the installation, check whether the RCU
and base station support the same AISG protocol. If not,
contact the technical support personnel of Huawei.
Standards:
EN 60950-1 (Safety)
EN 55022 (Emission)
EN 55024 (Immunity)
ETSI EN300386 (1.4.1)
FCC part15
Certification: CE、FCC、RoHS、WEEE
Daisy chain in: Male
Daisy chain out: Female
Drainage
Hole
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
Male
Female
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
30
9
Bottom view of RCU
RC
U
Appearance
BT-690-2700-001
Model: ABT000001
Features
y Used to feed DC voltage and OOK control signals into the feeder cable.
y Low passive intermodulation products, low insertion loss and high power capacity.
y Ultra wide band design for various communication system.
y Small volume, light weight.
y Support AISG 1.1 and AISG 2.0 protocol.
BT = Bias Tee
BTS = Base Transceiver Station
OOK = On Off Keying
Block Diagram
Port 2 (ANT)
DC/OOK
RF
Block
DC
Block
Port 1 (BTS)
BT
0
31
BT-690-2700-001
Model: ABT000001
Electrical Properties
Frequency range (MHz)
Insertion loss (dB)
690 - 2700
Port 1 ←→ Port 2
≤ 0.1 (690 - 960 MHz / 1710 - 2690 MHz)
≤ 0.15 (960 - 1710 MHz)
Port 1 ←→ Port 2
Isolation for DC signal (dB)
≥ 70
Port 1 ←→ Port DC/OOK
VSWR
Port 1 and Port 2
≤ 1.15 (690 - 960 MHz / 1710 - 2690 MHz)
≤ 1.2 (960 - 1710 MHz)
Input power (W)
Port 1 and Port 2
Avg. ≥ 500 (690 - 960 MHz)
Avg. ≥ 250 (1710 - 2690 MHz)
Input current (mA)
Port DC/OOK ←→ Port 2
≤ 2300
DC voltage reduction (V)
Port DC/OOK ←→ Port 2
≤ 1 (when the current is 2300 mA)
DC supply voltage (V)
0 .. +30
RF Impedance (Ω)
50
Intermodulation products (dBc)
< -160 (2 x 43 dBm carrier)
Environmental Specification
Operating temperature (℃)
-40 .. +70
Application scene
Indoor or outdoor
IP rating
IP66
Lightning protection (kA)
3 (10/350 us)
Mechanical Specification
48.5 x 151 x 45 (with connectors)
78 x 185 x 58
BT net Weight (kg)
< 0.56
Packing weight (kg)
< 0.60
Connectors
Port 1 (BTS)
7/16 DIN Male
Port 2 (Antenna)
7/16 DIN Female
Port DC/OOK
SMA Female
31
1
Packing dimensions (W x H x D) (mm)
BT
BT Dimensions (W x H x D) (mm)
BT-690-2700-001
Model: ABT000001
Unit: mm
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
BT
2
31
SBT-690-2700-001
Model: ASBT00001
SBT-690-2700-002
Model: ASBT00002
Features
y Convert signals between OOK and RS485.
y Low passive intermodulation products, low
insertion loss and high power capacity.
y Ultra wide band design for various
communication system.
y Small volume, light weight.
y Support AISG 1.1 and AISG 2.0 protocol.
SBT = Smart Bias Tee
RCU = Remote Control Unit for remote electrical
control of antenna tilt
BTS = Base Transceiver Station
AISG= Antenna Interface Standards Group
ASBT00001
ASBT00002
31
3
SB
T
Block Diagram
SBT-690-2700-001
Model: ASBT00001
SBT-690-2700-002
Model: ASBT00002
Model
ASBT00001
ASBT00002
Port 1 (Connector type)
Antenna (7 - 16 DIN Male)
BTS (7 - 16 DIN Male)
Port 2 (Connector type)
Feeder (7 - 16 DIN Female)
Feeder (7 - 16 DIN Female)
AISG (8-pin Connecter Female)
AISG (8-pin Connecter Male)
Port AISG
Electrical Properties
Frequency range (MHz)
Insertion loss (dB)
Isolation for DC signal (dB)
690 - 2700
Port 1 ←→ Port 2
≤ 0.1 (690 - 960 MHz / 1710 - 2690 MHz)
≤ 0.15 (960 - 1710 MHz)
Port 1 ←→ Port 2
≥ 70
Port 1 ←→ Port AISG
VSWR
Port 1 and Port 2
≤ 1.15 (690 - 960 MHz / 1710 - 2690 MHz)
≤ 1.2 (960 - 1710 MHz)
Input power (W)
Port 1 and Port 2
Port AISG
Avg. ≥ 500 (690 - 960 MHz) / Avg. ≥ 250 (1710 - 2690 MHz)
< 2.5 A (+8 … +30 V DC)
DC supply voltage (V)
+8 .. +30
RF impedance (Ω)
50
Intermodulation products (dBc)
< -160 (3rd order, 2 x 43 dBm)
Power consumption (W)
Typ. 0.6
Modem carrier frequency (MHz)
2.176
Environmental Specification
Operating temperature (℃)
-40 .. +70
Application scene
Indoor or outdoor
IP rating
IP67
Lightning protection (kA)
3 (10/350 us)
Mechanical Specification
BT Dimensions (W x H x D) (mm)
Packing dimensions (W x H x D) (mm)
75 x 160 x 45 (with connectors)
78 x 185 x 58
SBT net Weight (kg)
< 0.75
Packing weight (kg)
< 0.80
T
SB
4
31
SBT-690-2700-001
Model: ASBT00001
SBT-690-2700-002
Model: ASBT00002
Unit: mm
ASBT00001
Unit: mm
ASBT00002
HINT
Extraordinary operating conditions, such as heavy icing or storm wind, may result in the breakage of a SBT. These facts must be
considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety regulations.
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
T
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
31
5
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
SB
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
AISG Connecting Cables
For Remote Electrical Tilt (RET) System
Technical Specification
2 x 8 pin connector according to IEC 60130-9
Female / Male
Connectors
2 x 0.25 mm2 + 4 x 0.75 mm2 cable according to UL2464
Cable
Rate current
4A
Protection Class
IP67 (Coupled)
Temperature Range
-40 ~ 80 ℃
Color
Black
Single Bend radius
60 mm Min.
Multiple Bend radius
120 mm Min.
Application scene
Indoor // Outdoor
Pin Number
Signal
Female
1
+12 V DC Nominal
2
N/C
3
RS485 B
4
N/C
5
RS485 A
6
10 V - 30 V DC
7
DC Return
8
N/C
Male
Cable series
Length
BOM Code
0.5 m
04045920
2m
04045921
5m
04050228
10 m
04050184
15 m
04045922
30 m
04050230
50 m
04050231
60 m
04050182
70 m
04050232
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
SG
AI
6
31
AISG Connecting Cables
For RRU RET_Port
Technical Specification
Connector 1
8 pin connector according to IEC 60130-9
Female
Connector 2
9 pin DB9 connector
Male
Cable
4 Pair x 24 AWG
Rate current
4A
Protection Class
IP67 (Coupled)
Temperature Range
40 ~ 80 ℃
Color
Black
Single Bend radius
60 mm Min.
Multiple Bend radius
120 mm Min.
Application scene
Indoor // Outdoor
Signal
Pin Number
1
Female
Male
+12 V DC nominal
+12 V DC nominal
2
N/C
N/C
3
RS485 B
RS485 B
4
RS485 GND
RS485 GND
5
RS485 A
RS485 A
6
10 V - 30 V DC
N/C
7
DC Return
N/C
8
N/C
N/C
9
/
DC Return
Female
Male
Cable series
04070193
5m
04070097
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
Issue: 2013-01-08
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
SG
3m
31
7
BOM Code
AI
Length
PCU
Model: APCU00001
PCU is a portable control unit for RCU of RET antennas. It supports AISG 1.1
and AISG 2.0 / 3GPP protocol. It is portable, lightweight and easy to use for site
installation and maintenance personnel. It can be used as an adapter for USB/
RS485 to connect with PC, PC software via PCU remote control RCU.
PCU = Portable Control Unit
RET = Remote Electrical Tilt
RCU = Remote Control Unit
Specifications
Connectors to RCU
1 x 8-pin female conforming to IEC 60130-9
Input voltage
AC/DC adapter
20 V DC, 1.5 A
Rechargeable battery
16 V DC, 1.5 A
Output voltage to RCU
8-pin female: pin1 & pin6: 20 V DC, 1.5 A with external AC/DC adapter
8-pin female: pin1 & pin6: 16 V DC, 1.5 A with inner rechargeable battery
Rechargeable battery
Li-polymer (16 V, 2000 mAh), > 300 cycles
External power supply
Input: 100 - 240 V AC, 0.55 A, 50 Hz - 60 Hz
Output: 20 V DC, 1.5 A
128 x 64 dot-matrix LCD, yellow-green backlight, 4 x 8 Chinese characters / 4 x 16
characters
LCD
LED
USB
Indicating the status of USB connection
RUN
Indicating the status of USB/RS485 communication
Power
Indicating the status of power supply
Protocol to RCU
AISG 1.1 and AISG 2.0 / 3GPP
Interface to PC
USB 2.0
6 pcs, depending on system configuration and length of control cable
Max. number of RCU supported
Max. length of control cable
50 m / 6 RCUs (in daisy chain configuration)
Temperature range (℃)
-10 .. +55
PCU dimensions (H x W x D) (mm)
168 x 90 x 44
Packing dimensions (H x W x D) (mm)
340 x 275 x 75
PCU net weight (kg)
0.45 (with inner rechargeable battery, without external power adapter)
Packing weight (kg)
1.30
Compliance to standards:
1. Compliant with AISG 1.1 and AISG 2.0 / 3GPP
2. EMC: Emission: Conducted emission (EN 55022, 150 kHz - 30 MHz Class B)
Immunity: Conducted susceptibility (IEC 61000-4-6, 150 kHz - 30 MHz)
U
PC
8
31
PCU
Model: APCU00001
PCU is used as a RCU controller
(1) RET Antenna
(2) RCU
(3) RF Feeder Cable
(4) AISG Cable
(5) Site
(6) PCU
PCU is used as a USB/RS485 adapter
(1) RET Antenna
(2) RCU
(3) RF Feeder Cable
(4) AISG Cable
(5) Site
(6) PCU
(7) USB Cable
(8) PC
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
U
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
31
9
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
PC
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
D
Mounting
Instructions
MET Antenna with H-Brackets Installation Guide (A)
Part Number: 31043740
Issue: 03
HINT
1. Only qualified personnel are allowed to install the antenna.
Installation Tools
2. Appearance of the actual antenna may differ from the pictures.
Bracket Subassembly
13 mm combination
wrench (2 PCS)
Inclinometer
16 mm combination wrench
(2 PCS)
(1 PCS)
(1 PCS)
(2 PCS)
M10
(4 PCS)
1 Assemble the bracket
2 Install the bracket
Up bracket
Follow the directions shown
in the picture to install
brackets.
1
M
ET
In
Gu sta
id llat
e
io
32
n
Down bracket
MET Antenna with H-Brackets Installation Guide
Part Number: 31043740
Issue: 03
3 Manually adjust the electrical downtilt angle
1
2
3
The RCU is optional. For
details about how to install
Ruler
Before
adjustment
the RCU, see the relevant
Adjust angle
After
adjustment
RCU Installation Guide.
4 Install the antenna
1
2
3
4
Ensure the bracket is
fully collapsed at 0°.
5 Adjust the mechanical downtilt angle
Method 1
Scale of bracket
(the actual scale
prevails)
Finally, tighten all the nuts.
Method 2
Precise measurement
Recommended torque:
M8 = 20 Nm, M10 = 30 Nm
Before adjustment, adjust the
inclinometer to the desired downtilt
angle. After adjustment, locate the bead
in the inclinometer in the middle.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
M
ET
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
st
In
n
2
32
tio
la
al
e
id
Gu
MET Antenna with L-Brackets Installation Guide
Part Number: 31043744
Issue: 02
HINT
1. Only qualified personnel are allowed to install the antenna.
Installation Tools
2. Appearance of the actual antenna may differ from the pictures.
Bracket Subassembly
13 mm combination wrench (2 PCS)
Inclinometer
(1 PCS)
M8
(2 PCS)
(1 PCS)
(1 PCS)
1 Assemble the bracket
2 Install the bracket
3
ET
In
Gu sta
id llat
e
io
32
n
2
M
1
MET Antenna with L-Brackets Installation Guide
Part Number: 31043744
Issue: 02
3 Manually adjust the electrical downtilt angle
1
2
3
The RCU is optional. For
details about how to install
Ruler
Before
adjustment
the RCU, see the relevant
After
adjustment
Adjust angle
RCU Installation Guide.
4 Install the antenna
1
Ensure the bracket is
fully collapsed at 0°.
2
5 Adjust the mechanical downtilt angle
Method 1
Scale of bracket
Finally, tighten all the nuts.
Method 2
Precise measurement
Recommended torque:
M8 = 18 Nm
Before adjustment, adjust the
inclinometer to the desired downtilt
angle. After adjustment, locate the bead
in the inclinometer in the middle.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
M
ET
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
st
In
n
4
32
tio
la
al
e
id
Gu
MET Antenna with H-Brackets Installation Guide (B)
Part Number: 31043745
Issue: 02
HINT
1. Only qualified personnel are allowed to install the antenna.
2. Appearance of the actual antenna may differ from the pictures.
3. The RCU is optional. For details about how to install the RCU, see the relevant RCU Installation Guide.
Installation Tools
Bracket Subassembly
13 mm combination
wrench (2 PCS)
Inclinometer
16 mm combination wrench
(2 PCS)
(1 PCS)
(1 PCS)
(2 PCS)
M10
(4 PCS)
1 Assemble the bracket
2 Install the bracket
Up bracket
Follow the directions shown
in the picture to install
brackets.
5
M
ET
In
Gu sta
id llat
e
io
32
n
Down bracket
MET Antenna with H-Brackets Installation Guide
Part Number: 31043745
Issue: 02
3 Manually adjust the electrical downtilt angle
1
2
3
4
Turn 180°
Ruler
Protection cap
After adjustment, overturn the
protection cap and tighten it.
Adjust angle
Twist off protective cap
4 Install the antenna
1
2
3
4
Ensure the bracket is
fully collapsed at 0°.
5 Adjust the mechanical downtilt angle
Method 1
Scale of bracket
(the actual scale
prevails)
Finally, tighten all the nuts.
Method 2
Precise measurement
Recommended torque:
M8 = 20 Nm, M10 = 30 Nm
Before adjustment, adjust the
inclinometer to the desired downtilt
angle. After adjustment, locate the bead
in the inclinometer in the middle.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
M
ET
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
st
In
n
6
32
tio
la
al
e
id
Gu
RET Antenna with L-Brackets Installation Guide
Part Number: 31043749
Issue: 02
HINT
1. The packing materials of antennas cannot be removed on
transportation.
2. Only qualified personnel are allowed to install the antenna.
4. The RET SN attached to the antenna nameplate is the same
with the RET SN on the antenna installation recording form.
To avoid RET SN confusion, do not separate the antenna
from the antenna installation recording form.
3. Appearance of the actual antenna may differ from the pictures.
Installation Tools
Bracket Subassembly
13 mm combination wrench (2 PCS)
Inclinometer
(1 PCS)
M8
(2 PCS)
(1 PCS)
(1 PCS)
1 Assemble the bracket
2 Install the bracket
7
T
In
s
Gu tal
id lat
io
e
32
n
2
RE
1
RET Antenna with L-Brackets Installation Guide
Part Number: 31043749
Issue: 02
3 Connect the AISG Cable
Align the convex of the antenna AISG male connector with the concave of the AISG female connector correctly, press the connectors
together, and then secure them by hand properly. For details, see step 2.
1
2
3
Protective lid
AISG Male
Remove the AISG protective lid.
Connect the AISG cable.
Tighten the AISG cable.
1. Do not remove the
protective lid from
the antenna AISG
female.
2. Connect the other
connector of the
AISG cable to the
SBT, TMA or RRU.
4 Write Down the Information
CAUTION
1. In the daisy chain scenario, must write down the information in recording form.
2. Before the filling, please ensure the RET SN attached to the antenna nameplate is the same as the RET SN on the antenna installation
recording form.
1
2 Example
Packaging bag
Recording form
Taking out the recording form packaging bag.
According to the actual situation to fill in the recording form.
5 Install the antenna
1
Ensure the bracket is
fully collapsed at 0°.
2
T
RE
id
tio
la
e
al
st
In
Gu
n
8
32
RET Antenna with L-Brackets Installation Guide
Part Number: 31043749
Issue: 02
6 Adjust the mechanical downtilt angle
Method 1
Scale of bracket
Finally, tighten all the nuts.
Method 2
Recommended torque:
Precise measurement
M8 = 18 Nm
Before adjustment, adjust the
inclinometer to the desired downtilt
angle. After adjustment, locate the bead
in the inclinometer in the middle.
Adjust the mechanical downtilt angle
a In the non-daisy chain scenario, an RET antenna connects with one AISG cable.
b In the daisy chain scenario, connect each RET antenna to an AISG cable, then connect the female connector of the upper-level
RET antenna to the male connector of the lower-level RET antenna with an AISG cable. Do not remove the protective lid from the
female connector of the lowest-level RET antenna.
b Daisy Chain Scenario
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
9
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
In
s
Gu tal
id lat
io
e
32
n
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
T
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
RE
a Non-Daisy Chain Scenario
RET Antenna with H-Brackets Installation Guide
Part Number: 31043750
Issue: 02
HINT
1. The packing materials of antennas cannot be removed on
transportation.
2. Only qualified personnel are allowed to install the antenna.
4. The RET SN attached to the antenna nameplate is the same
with the RET SN on the antenna installation recording form.
To avoid RET SN confusion, do not separate the antenna
from the antenna installation recording form.
3. Appearance of the actual antenna may differ from the pictures.
Installation Tools
Bracket Subassembly
13 mm combination
wrench (2 PCS)
Inclinometer
16 mm combination wrench
(2 PCS)
(1 PCS)
1 Assemble the bracket
2 Install the bracket
Up bracket
Follow the directions shown
in the picture to install
brackets.
Down bracket
(1 PCS)
(2 PCS)
M10
(4 PCS)
T
RE
id
tio
la
e
al
st
In
Gu
n
0
33
RET Antenna with H-Brackets Installation Guide
Part Number: 31043750
Issue: 02
3 Connect the AISG Cable
Align the convex of the antenna AISG male connector with the concave of the AISG female connector correctly, press the connectors
together, and then secure them by hand properly. For details, see step 2.
1
2
3
Protective lid
AISG Male
Remove the AISG protective lid.
Connect the AISG cable.
Tighten the AISG cable.
1. Do not remove the
protective lid from
the antenna AISG
female.
2. Connect the other
connector of the
AISG cable to the
SBT, TMA or RRU.
4 Write Down the Information
CAUTION
1. In the daisy chain scenario, must write down the information in recording form.
2. Before the filling, please ensure the RET SN attached to the antenna nameplate is the same as the RET SN on the antenna installation
recording form.
1
2 Example
Packaging bag
Recording form
Taking out the recording form packaging bag.
According to the actual situation to fill in the recording form.
5 Install the antenna
1
2
3
4
1
T
RE
fully collapsed at 0°.
In
s
Gu tal
id lat
io
e
33
n
Ensure the bracket is
RET Antenna with H-Brackets Installation Guide
Part Number: 31043750
Issue: 02
6 Adjust the mechanical downtilt angle
Method 1
Scale of bracket
(the actual scale
prevails)
Finally, tighten all the nuts.
Method 2
Recommended torque:
Precise measurement
M8 = 20 Nm, M10 = 30 Nm
Before adjustment, adjust the
inclinometer to the desired downtilt
angle. After adjustment, locate the bead
in the inclinometer in the middle.
Adjust the mechanical downtilt angle
a In the non-daisy chain scenario, an RET antenna connects with one AISG cable.
b In the daisy chain scenario, connect each RET antenna to an AISG cable, then connect the female connector of the upper-level
RET antenna to the male connector of the lower-level RET antenna with an AISG cable. Do not remove the protective lid from the
female connector of the lowest-level RET antenna.
a Non-Daisy Chain Scenario
b Daisy Chain Scenario
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
T
RE
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
id
tio
la
e
al
st
In
Gu
n
2
33
FET Antenna with H-Brackets Installation Guide
Part Number: 31043746
Issue: 02
HINT
1. Only qualified personnel are allowed to install the antenna.
Installation Tools
2. Appearance of the actual antenna may differ from the pictures.
Bracket Subassembly
13 mm combination
wrench (2 PCS)
Inclinometer
16 mm combination wrench
(2 PCS)
(1 PCS)
(1 PCS)
(2 PCS)
M10
(4 PCS)
1 Assemble the bracket
2 Install the bracket
Up bracket
Follow the directions shown
in the picture to install
brackets.
3
FE
T
In
s
Gu tal
id lat
io
e
33
n
Down bracket
FET Antenna with H-Brackets Installation Guide
Part Number: 31043746
Issue: 02
3 Install the antenna
1
2
3
4
Ensure the bracket is
fully collapsed at 0°.
4 Adjust the mechanical downtilt angle
Method 1
Scale of bracket
(the actual scale
prevails)
Finally, tighten all the nuts.
Method 2
Precise measurement
Recommended torque:
M8 = 20 Nm, M10 = 30 Nm
Before adjustment, adjust the
inclinometer to the desired downtilt
angle. After adjustment, locate the bead
in the inclinometer in the middle.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
T
FE
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
n
tio
4
33
e
id
la
al
st
In
Gu
FET Antenna with L-Brackets Installation Guide
Part Number: 31043747
Issue: 02
HINT
1. Only qualified personnel are allowed to install the antenna.
Installation Tools
2. Appearance of the actual antenna may differ from the pictures.
Bracket Subassembly
13 mm combination wrench (2 PCS)
Inclinometer
(1 PCS)
M8
(2 PCS)
(1 PCS)
(1 PCS)
1 Assemble the bracket
2 Install the bracket
5
T
In
s
Gu tal
id lat
io
e
33
n
2
FE
1
FET Antenna with L-Brackets Installation Guide
Part Number: 31043747
Issue: 02
3 Install the antenna
1
Ensure the bracket is
fully collapsed at 0°.
2
4 Adjust the mechanical downtilt angle
Method 1
Scale of bracket
Finally, tighten all the nuts.
Method 2
Precise measurement
Recommended torque:
M8 = 18 Nm
Before adjustment, adjust the
inclinometer to the desired downtilt
angle. After adjustment, locate the bead
in the inclinometer in the middle.
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
Any previous catalogue issues become invalid.
T
FE
Issue: 2012-10-26
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
www.huawei.com
id
tio
la
e
al
st
In
Gu
n
6
33
Tri-sector Cluster Antenna Installation Guide
Part Number: 31043751
Issue: 01
HINT
1. Only qualified personnel are allowed to install the antenna.
Installation Tools
2. Appearance of the actual antenna may differ from the pictures.
Fittings
13 mm combination
wrench (2 PCS)
300 x 36 mm
Adjustable wrench
16 mm combination wrench
(2 PCS)
Phillips screwdriver
Hoisting ring
Lightning rod
Bolt
1 Preparation before Installation
1
2
Install the hoisting ring on
top of the antenna.
4
e
id
Gu
n
tio
33
7
se
al
Tr
i-
la
ct
or
C
lu
st
er
Lift the shield up to the
position shown by the arrow.
st
Loosen the screw fixing the
protective cover.
In
3
Tighten the hoisting ring.
Tri-sector Cluster Antenna Installation Guide
Part Number: 31043751
Issue: 01
Installing a Cluster Antenna without SBT
1
2
Remove all protective caps from all
DIN connectors and Tilt ports.
3
Install RF jumpers.
a Non-Daisy Chain Scenario
Install the RCU. For details about
how to install the RCU, see the RCU
Installation Guide.
b Daisy Chain Scenario
Non-daisy chain scenario: One RCU is
Daisy chain scenario: One RCU is installed in a sector, and RCUs of three sectors are in
installed in a sector, and RCUs of three
daisy chain. Do not remove the protective cap from the female connector on the RCU of
sectors are not connected with each other.
the last sector. For details about how to connect the RCUs in daisy chain mode, see the
Do not remove the protective cap from
RCU Installation Guide.
the female connector of the RCU. The
three sectors have the same installation
a
Sector 1
b
procedure.
Sector 1/ Sector 2/ Sector 3
c
Sector 3
Sector 2
er
st e
lu id
r C Gu
to n
ec tio
i-s la
Tr tal
8
s
In
33
Tri-sector Cluster Antenna Installation Guide
Part Number: 31043751
Issue: 01
Connect the AISG Cable
CAUTION
1. The SBT must be produced by Huawei. The SBT must be installed within the antenna radome, vertical to the internal pole inside the
antenna. For details, see step 2.
2. Before installing the RCU and SBT, ensure that sufficient installation space has been reserved for them.
1 Remove all protective caps from all DIN connectors and Tilt ports.
2 Install the SBT. For details, see the SBT Installation Guide.
3 Install RF jumpers.
4 Install the RCU. For details, see the RCU Installation Guide.
5 Connect the AISG cables.
Align the convex of the AISG male connector with the concave of the AISG
female connector correctly, press the connectors together, and then secure them
by hand properly. For details, see the following figure.
RCU
SBT
e
id
Gu
n
tio
33
9
se
al
In
st
Tr
i-
la
ct
or
C
lu
st
er
AISG cable
Tri-sector Cluster Antenna Installation Guide
Part Number: 31043751
Issue: 01
a Non-Daisy Chain Scenario
Non-daisy chain scenario: One SBT is installed in a sector, where the RCU connects to the SBT by using an AISG cable. Do not remove
the protective cap from the female connector of the RCU. Three sectors have the same installation procedure.
Sector 1/ Sector 2/ Sector 3
RCU
SBT
b Daisy Chain Scenario
Daisy chain scenario: Only one SBT is installed. RCUs of 3 sectors are connected in daisy chain mode by using AISG cables. For details
about how to connect the RCUs in daisy chain mode, see the RCU Installation Guide.
a
Sector 1
RCU
b
Sector 2
c
Sector 3
SBT
RCU
RCU
er
st e
lu id
r C Gu
to n
ec tio
i-s la
Tr tal
0
s
In
34
Tri-sector Cluster Antenna Installation Guide
Part Number: 31043751
Issue: 01
CAUTION
Move the antenna to the mounting platform by using a hoisting ring.
Securing the Antenna
1
2
Install the lightning rod.
Remove the hoisting ring.
3
4
Adjust the azimuth, install the
antenna to the mounting frame,
and fix nuts of three sectors.
Place the protective cover to the
bottom of the antenna and lock
screws on the three sectors.
The concave on the top
of the sector silkscreen is
the center of the sector.
Align the concave with
the direction of the
determined antenna
azimuth.
e
id
Gu
n
tio
34
1
se
la
ct
or
C
lu
st
er
www.huawei.com
al
Issue: 2012-10-26
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
Tr
i-
Any previous catalogue issues become invalid.
HUAWEI TECHNOLOGIES CO., LTD.
st
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOSE NOT CONSTITUTE
ANY KIND OF WARRANTIES.
In
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
Hungary
Holland Hub
Dubai Hub
China
Mexico
West
Africa
India
Brazil
Current Supply Route
5 supply centers
Future Supply Route
2Hubs, 81 service branches
Copyright © Huawei Technologies Co., Ltd. 2013. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
Trademark Notice
, HUAWEI, and
are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned are the property of their respective owners.
General Disclaimer
THE INFORMATION IN THIS DOCUMENT MAY CONTAIN PREDICTIVE STATEMENTS
INCLUDING, WITHOUT LIMITATION, STATEMENTS REGARDING THE FUTURE FINANCIAL
AND OPERATING RESULTS, FUTURE PRODUCT PORTFOLIO, NEW TECHNOLOGY, ETC.
THERE ARE A NUMBER OF FACTORS THAT COULD CAUSE ACTUAL RESULTS AND
DEVELOPMENTS TO DIFFER MATERIALLY FROM THOSE EXPRESSED OR IMPLIED IN THE
PREDICTIVE STATEMENTS. THEREFORE, SUCH INFORMATION IS PROVIDED FOR REFERENCE
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base
Bantian Longgang
Shenzhen 518129, P.R. China
Tel: +86-755-28780808
Email: Antenna_IBS@huawei.com
Version No.: M3-022337-20130114-C-2.0
PURPOSE ONLY AND CONSTITUTES NEITHER AN OFFER NOR AN ACCEPTANCE. HUAWEI
MAY CHANGE THE INFORMATION AT ANY TIME WITHOUT NOTICE.
www.huawei.com