Numerical Standards Listing
ISA-RP2.1-1978 - Manometer Tables
ISA-5.1-1984 (R1992) - Instrumentation Symbols and Identification (Formerly ANSI/ISA-5.11984 [R1992])
ISA-5.2-1976 (R1992) - Binary Logic Diagrams for Process Operations (Formerly ANSI/ISA5.2-1976 [R1992])
ISA-5.3-1983 - Graphic Symbols for Distributed Control/Shared Display Instrumentation, Logic
and Computer Systems
ISA-5.4-1991 - Instrument Loop Diagrams (Formerly ANSI/ISA-5.4-1991)
ISA-5.5-1985 - Graphic Symbols for Process Displays
ANS/ISA-5.06.01-2007 - Functional Requirements Documentation for Control Software
Applications
ANSI/ISA-7.0.01-1996 - Quality Standard for Instrument Air
ANSI/ISA-60079-0 (12.00.01)-2005 - Electrical Apparatus for Use in Class I, Zones 0, 1 & 2
Hazardous (Classified) Locations: General Requirements [Supercedes ANSI/ISA-12.00.012002 (IEC 60079-0 Ed 3 Mod)]
ANSI/ISA-12.01.01-1999 - Definitions and Information Pertaining to Electrical Apparatus in
Hazardous (Classified) Locations
ANSI/ISA-60079-11 (12.02.01)-2002 [Formerly ANSI/ISA-12.02.01-2002 (IEC 60079-11
Mod)] - Electrical Apparatus for Use in Class I, Zones 0, 1, and 2 Hazardous (Classified)
Locations - Intrinsic Safety “i”
ANSI/ISA-60079-27 (12.02.04) -2006, Fieldbus Intrinsically Safe Concept (FISCO) and
Fieldbus Non-Incendive Concept (FNICO)
ISA-TR12.2-1995 - Intrinsically Safe System Assessment Using the Entity Concept
ISA-RP12.2.02-1996 - Recommendations for the Preparation, Content, and Organization of
Intrinsic Safety Control Drawings
ANSI/ISA-12.04.01-2004 (IEC 60079-2 Mod) - Electrical Apparatus for Explosive Gas
Atmospheres - Part 2 Pressurized Enclosures “p"
ISA-RP12.4-1996 - Pressurized Enclosures
ANSI/ISA-RP12.06.01-2003 - Recommended Practice for Wiring Methods for Hazardous
(Classified) Locations Instrumentation Part 1: Intrinsic Safety (Formerly ANSI/ISA-RP12.06.011995 [R2002])
ANSI/ISA-TR12.06.01-1999 - Electrical Equipment in a Class I, Division 2/Zone 2 Hazardous
Location
ISA-12.10-1988 - Area Classification in Hazardous (Classified) Dust Locations
ANSI/ISA-61241-0 (12.10.02)-2006 -Electrical Apparatus for Use in Zone 20, Zone 21 and
Zone 22 Hazardous (Classified) Locations - General Requirements
ANSI/ISA-61241-1 (12.10.03)-2006 - Electrical Apparatus for Use in Zone 21 and Zone 22
Hazardous (Classified) Locations - Protection by Enclosures “tD”
ANSI/ISA-61241-11 (12.10.04)-2006, Electrical Apparatus for Use in Zone 20, Zone 21 and
Zone 22 Hazardous (Classified) Locations - Protection by Intrinsic Safety “iD”
ANSI/ISA-61241-10 (12.10.05-2004) - Electrical Apparatus for Use in Zone 20, Zone 21 and
Zone 22 Hazardous (Classified) Locations - Classification of Zone 20, Zone 21 and Zone 22
Hazardous (Classified) Locations
ANSI/ISA-61241-2 (12.10.06)-2006 - Electrical Apparatus for Use in Zone 21 and Zone 22
Hazardous (Classified) Locations - Protection by Pressurization “pD”
ANSI/ISA-61241-18 (12.10.07)-2006 - Electrical Apparatus for Use in Zone 20, Zone 21 and
Zone 22 Hazardous (Classified) Locations - Protection by Encapsulation “mD”
ANSI/ISA-12.12.01-2007 - Nonincendive Electrical Equipment for Use in Class I and II,
Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations
ANSI/ISA-60079-15 (12.12.02)-2003 - Electrical Apparatus for Use in Class I, Zone 2
Hazardous (Classified) Locations - Type of Protection “n”
ISA-RP12.12.03-2002 - Recommended Practice for Portable Electronic Products Suitable for
Use in Class I and II, Division 2, Class I Zone 2 and Class III, Division 1 and 2 Hazardous
(Classified) Locations
ANSI/ISA-12.13.01-2003 (IEC 61779-1 through 5 Mod), Performance Requirements for
Combustible Gas Detectors
ANSI/ISA-TR12.13.01-1999 (R2005) - Flammability Characteristics of Combustible Gases
and Vapors
ANSI/ISA-RP12.13.02 (IEC 61779-6 Mod), Recommended Practice for the Installation,
Operation, and Maintenance of Combustible Gas Detection Instruments (Formerly ISARP12.13, Part II-1987)
ANSI/ISA-TR12.13.02-1999 (R2005) - Investigation of Fire and Explosion Accidents in FuelRelated Industries - A Manual by Kuchta
ANSI/ISA-12.13.04-2007, Performance Requirements for Open Path Combustible Gas
Detectors
ANSI/ISA-60079-7 (12.16.01)-2002 [Formerly ANSI/ISA-12.16.01-2002 (IEC 60079-7 Mod)] Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of
Protection - Increased Safety “e”
ANSI/ISA-TR12.21.01-2004 - Use of Fiber Optic Systems in Class I Hazardous (Classified)
Locations
ANSI/ISA-60079-1 (12.22.01) -2005 - Electrical Apparatus for Use in Class I, Zone 1
Hazardous (Classified) Locations Type of Protection - Flameproof “d“ [Supercedes ANSI/ISA12.22.01-2002 (IEC 60079-1 Ed 3 Mod)]
ANSI/ISA-60079-18 (12.23.01) -2005 - Electrical Apparatus for Use in Class I, Zone 1
Hazardous (Classified) Locations Type of Protection - Encapsulation “m” [Supercedes
ANSI/ISA-12.23.01-2002 (IEC 60079-18 Mod)]
ANSI/ISA-TR12.24.01-1998 (IEC 60079-10 Mod) - Recommended Practice for Classification
of Locations for Electrical Installations Classified as Class I, Zone 0, Zone 1, or Zone 2
ANSI/ISA-60079-5 (12.25.01)-1998 [Formerly ANSI/ISA-12.25.01-1998 (IEC 60079-5 Mod)] Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of
Protection - Powder Filling “q”
ANSI/ISA-60079-6 (12.26.01)-1998 [Formerly ANSI/ISA-12.26.01-1998 (IEC 60079-6 Mod)] Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of
Protection - Oil-Immersion “o”
ANSI/ISA-12.27.01-2003, Requirements for Process Sealing Between Electrical Systems and
Flammable or Combustible Process Fluids
ISA-18.1-1979 (R2004) - Annunciator Sequences and Specifications (Formerly ANSI/ISA18.1-1979 [R1992])
ISA-20-1981 - Specification Forms for Process Measurement and Control Instruments,
Primary Elements and Control Valves
ISA-TR20.00.01-2001 - Specification Forms for Process Measurement and Control
Instruments - Part 1: General Considerations - Updated with 27 New Specification forms in
2004 - 2006 (also includes ISA-20.00.03-2001, Specification Forms for Process Measurement
and Control Instruments - Part 3: Form Requirements and Development Guidelines)
ISA-RP31.1-1977 - Specification, Installation and Calibration of Turbine Flowmeters
ISA-37.1-1975 (R1982) - Electrical Transducer Nomenclature and Terminology (Formerly
ANSI MC6.1-1975)
ISA-RP37.2-1982 (R1995) - Guide for Specifications and Tests for Piezoelectric Acceleration
Transducers for Aerospace Testing
ISA-37.3-1982 (R1995) - Specifications and Tests for Strain Gage Pressure Transducers
ISA-37.5-1982 (R1995) - Specifications and Tests for Strain Gage Linear Acceleration
Transducers
ISA-37.6-1982 (R1995) - Specifications and Tests for Potentiometric Pressure Transducers
ISA-37.8-1982 (R1995) - Specifications and Tests for Strain Gage Force Transducers
ISA-37.10-1982 (R1995) - Specifications and Tests for Piezoelectric Pressure and SoundPressure Transducers
ISA-37.12-1982 (R1995) - Specifications and Tests for Potentiometric Displacement
Transducers
ISA-37.16.01-2002 - A Guide for the Dynamic Calibration of Pressure Transducers
ISA-RP42.00.01-2001 - Nomenclature for Instrument Tube Fittings
ISA-TR50.02, Parts 3 & 4-2000 - Fieldbus Standard for Use in Industrial Control Systems,
Parts 3 & 4: Technical Report for Fieldbus Data Link Layer - Tutorial
ISA-TR50.02, Part 9-2000 - Fieldbus Standard for Use in Industrial Control Systems: User
Layer Technical Report
ANSI/ISA-50.00.01-1975 (R2002) - Compatibility of Analog Signals for Electronic Industrial
Process Instruments (Formerly ISA-50.1-1982 [R1992])
ISA-51.1-1979 (R1993) - Process Instrumentation Terminology
ISA-TR52.00.01-2006 - Recommended Environments for Standards Laboratories
[Supersedes: ISA-RP52.1-1975]
ISA-RP60.1-1990 - Control Center Facilities
ISA-RP60.2-1995 - Control Center Design Guide and Terminology
ISA-RP60.3-1985 - Human Engineering for Control Centers
ISA-RP60.4-1990 - Documentation for Control Centers
ISA-RP60.6-1984 - Nameplates, Labels, and Tags for Control Centers
ISA-RP60.8-1978 - Electrical Guide for Control Centers
ISA-RP60.9-1981 - Piping Guide for Control Centers
ISA-RP60.11-1991 - Crating, Shipping and Handling for Control Centers
ANSI/ISA-67.01.01-2002 - Transducer and Transmitter Installation for Nuclear Safety
Applications (Formerly ANSI/ISA-67.01-1994)
ANSI/ISA-67.02.01-1999 - Nuclear Safety-Related Instrument-Sensing Line Piping and
Tubing Standard for Use in Nuclear Power Plants
ISA-67.03-1982 - Standard for Light Water Reactor Coolant Pressure Boundary Leak
Detection
ANSI/ISA-67.04.01-2000 - Setpoints for Nuclear Safety-Related Instrumentation
ISA-RP67.04.02-2000 - Methodologies for the Determination of Setpoints for Nuclear SafetyRelated Instrumentation
ANSI/ISA-TR67.04.08-1996 - Setpoints for Sequenced Actions
ISA-TR67.04.09-2005 - Graded Approaches to Setpoint Determination
ANSI/ISA-67.06.01-2002 - Performance Monitoring for Nuclear Safety-Related Instrument
Channels in Nuclear Power Plants (Formerly ISA-67.06-1984)
ANSI/ISA-67.14.01-2000 - Qualifications and Certification of Instrumentation and Control
Technicians in Nuclear Facilities
ISA-71.01-1985 - Environmental Conditions for Process Measurement and Control Systems:
Temperature and Humidity
ISA-71.02-1991 - Environmental Conditions for Process Measurement and Control Systems:
Power
ANSI/ISA-71.03-1995 - Environmental Conditions for Process Measurement and Control
Systems: Mechanical Influences
ISA-71.04-1985 - Environmental Conditions for Process Measurement and Control Systems:
Airborne Contaminants
ISA-RP74.01-1984 - Application and Installation of Continuous-Belt Weighbridge Scales
ANSI/ISA-75.01.01-2002 (IEC 60534-2-1 Mod) - 2007 - Flow Equations for Sizing Control
Valves
ANSI/ISA-75.02-1996 - Control Valve Capacity Test Procedures
ISA-TR75.04.01-1998 (R2006) - Control Valve Position Stability
ANSI/ISA-75.05.01-2000 (R2005) - Control Valve Terminology
ISA-75.07-1997 - Laboratory Measurement of Aerodynamic Noise Generated by Control
Valves
ANSI/ISA-75.08-1999 - Installed Face-to-Face Dimensions for Flanged Clamp or Pinch
Valves
ANSI/ISA-75.08.01-2002 (R2007) - Face-to-Face Dimensions for Integral Flanged GlobeStyle Control Valve Bodies (Classes 125, 150, 250, 300, and 600)
ANSI/ISA-75.08.02-2003 - Face-to-Face Dimensions for Flangeless Control Valves (Classes
150, 300 and 600) (Formerly ANSI/ISA-75.04-1995)
ANSI/ISA-75.08.03-2001 (R2007) - Face-to-Face Dimensions for Socket Weld-End and
Screwed-End Globe-Style Control Valves (Classes 150, 300, 600, 900, 1500, and 2500)
ANSI/ISA-75.08.04-2001 (R2007) - Face-to-Face Dimensions for Buttweld-End Globe-Style
Control Valves (Class 4500)
ANSI/ISA-75.08.05-2002 (R2007) - Face-to-Face Dimensions for Buttweld-End Globe-Style
Control Valves (Classes 150, 300, 600, 900, 1500, and 2500)
ANSI/ISA-75.08.06-2002 (R2007) - Face-to-Face Dimensions for Flanged Globe-Style Control
Valve Bodies (Classes 900, 1500, and 2500)
ANSI/ISA-75.08.07-2001 (R2007) - Face-to-Face Dimensions for Separable Flanged GlobeStyle Control Valves (Classes 150, 300, and 600)
ANSI/ISA-75.08.08-1999 (R2007) - Face-to-Centerline Dimensions for Flanged Globe-Style
Angle Control Valve Bodies (Classes 150, 300, and 600)
ANSI/ISA-75.08.09-2004 - Face-to-Face Dimensions for Sliding Stem Flangeless Control
Valves (Classes 150, 300, and 600)
ANSI/ISA-75.11.01-1985 (R2002) [Formerly ANSI/ISA-75.11-1985 (R1997)] - Inherent Flow
Characteristic and Rangeability of Control Valves
ANSI/ISA-75.13.01-1996 (R2007) - Method of Evaluating the Performance of Positioners with
Analog Input Signals and Pneumatic Output
ISA-75.17-1989 - Control Valve Aerodynamic Noise Prediction
ANSI/ISA-75.19.01-2007 - Hydrostatic Testing of Control Valves
ISA-RP75.21-1989 (R1996) - Process Data Presentation for Control Valves
ISA-RP75.23-1995 - Considerations for Evaluating Control Valve Cavitation
ANSI/ISA-75.25.01-2000 - Test Procedure for Control Valve Response Measurement from
Step Inputs
ANSI/ISA-TR75.25.02-2000 - Control Valve Response Measurement from Step Inputs
ANSI/ISA-75.26.01-2006, Control Valve Diagnostic Data Acquisition and Reporting
ISA-RP76.0.01-1998 - Analyzer System Inspection and Acceptance
ANSI/ISA-76.00.02-2002 - Modular Component Interfaces for Surface-Mount Fluid
Distribution Components - Part 1: Elastomeric Seals
ANSI/ISA-77.13.01-1999 - Fossil Fuel Power Plant Steam Turbine Bypass Systems
ANSI/ISA-77.20-1993 (R2005) - Fossil Fuel Power Plant Simulators - Functional
Requirements
ANSI/ISA-77.41.01-2005 - Fossil Fuel Power Plant Boiler Combustion Controls
ANSI/ISA-77.42.01-1999 (R2006) - Fossil Fuel Power Plant Feedwater Control System Drum Type
ANSI/ISA-77.43.01-1994 (R2002) - Fossil Fuel Power Plant Unit/Plant Demand Development Drum Type (Formerly ANSI/ISA-77.43.01-1994)
ANSI/ISA-77.44.01-2007 - Fossil Fuel Power Plant - Steam Temperature Controls
ISA-RP77.60.02-2000 (R2006) - Fossil Fuel Power Plant Human-Machine Interface: Alarms
ISA-TR77.60.04-1996 (R2004) - Fossil Fuel Power Plant Human-Machine Interface Electronic Screen Displays
ISA-RP77.60.05-2001 - Fossil Fuel Power Plant Human-Machine Interface: Task Analysis
ANSI/ISA-77.70-1994 (R2005) - Fossil Fuel Power Plant Instrument Piping Installation
ANSI/ISA-61010-1 (82.02.01) CSA C22.2 No. 1010.1 and ANSI/UL 61010-1 - Safety
Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part
1: General Requirements (Updated with Annex DV US 22 July 2005)
ANSI/ISA-61010-031 (82.02.02)-2007 - Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use - Part 031: Safety requirements for hand-held
probe assemblies for electrical measurement and test
ISA-82.03-1988 - Safety Standard for Electrical and Electronic Test, Measuring, Controlling,
and Related Equipment (Partial Revision and Redesignation of ANSI C39.5-1974)
ANSI/ISA-84.00.01-2004 Part 1(IEC 61511-1 Mod) - Functional Safety: Safety Instrumented
Systems for the Process Industry Sector - Part 1: Framework, Definitions, System, Hardware
and Software Requirements
ANSI/ISA-84.00.01-2004 Part 2 (IEC 61511-2 Mod) - Functional Safety: Safety Instrumented
Systems for the Process Industry Sector - Part 2: Guidelines for the Application of ANSI/ISA84.00.01 Part 1 (IEC 61511-1 Mod) - Informative
ANSI/ISA-84.00.01-2004 Part 3 (IEC 61511-3 Mod) - Functional Safety: Safety Instrumented
Systems for the Process Industry Sector - Part 3: Guidance for the Determination of the
Required Safety Integrity Levels - Informative
ISA-TR84.00.02-2002 - Part 1: Safety Instrumented Functions (SIF) - Safety Integrity Level
(SIL) Evaluation Techniques Part 1: Introduction
ISA-TR84.00.02-2002 - Part 2: Safety Instrumented Functions (SIF) - Safety Integrity Level
(SIL) Evaluation Techniques Part 2: Determining the SIL of a SIF via Simplified Equations
ISA-TR84.00.02-2002 - Part 3: Safety Instrumented Functions (SIF) - Safety Integrity Level
(SIL) Evaluation Techniques Part 3: Determining the SIL of a SIF via Fault Tree Analysis
ISA-TR84.00.02-2002 - Part 4: Safety Instrumented Functions (SIF) - Safety Integrity Level
(SIL) Evaluation Techniques Part 4: Determining the SIL of a SIF via Markov Analysis
ISA-TR84.00.02-2002 - Part 5: Safety Instrumented Functions (SIF) - Safety Integrity Level
(SIL) Evaluation Techniques Part 5: Determining the PFD of SIS Logic Solvers via Markov
Analysis
ISA-TR84.00.03-2002 - Guidance for Testing of Process Sector Safety Instrumented
Functions (SIF) Implemented as or Within Safety Instrumented Systems (SIS)
ISA-TR84.00.04-2005 Part 1, Guidelines for the Implementation of ANSI/ISA-84.00.01-2004
(IEC 61511 Mod)
ISA-TR84.00.04-2005 Part 2, Example Implementation of ANSI/ISA-84.00.01-2004 (IEC
61511 Mod)
ISA-88.01-1995 (R2006) - Batch Control Part 1: Models and Terminology
ANSI/ISA-88.00.02-2001 - Batch Control Part 2: Data Structures and Guidelines for
Languages
ANSI/ISA-88.00.03-2003 - Batch Control Part 3: General and Site Recipe Models and
Representation
ISA-TR88.0.03-1996 - Possible Recipe Procedure Presentation Formats
ANSI/ISA-88.00.04-2006, Batch Control Part 4: Batch Production Records
ANSI/ISA-91.00.01-2001 - Identification of Emergency Shutdown Systems and Controls That
Are Critical to Maintaining Safety in Process Industries
ISA-TR91.00.02-2003, Criticality Classification Guideline for Instrumentation
ISA-92.0.01, Part I-1998 - Performance Requirements for Toxic Gas-Detection Instruments:
Hydrogen Sulfide
ISA-RP92.0.02, Part II-1998 - Installation, Operation, and Maintenance of Toxic GasDetection Instruments: Hydrogen Sulfide
ANSI/ISA-92.02.01, Part I-1998 (R2007) - Performance Requirements for Carbon Monoxide
Detection Instruments (50-1000 ppm Full Scale)
ISA-RP92.02.02, Part II-1998 - Installation, Operation, and Maintenance of Carbon Monoxide
Detection Instruments (50-1000 ppm Full Scale)
ISA-92.03.01-1998 - Performance Requirements for Ammonia Detection Instruments (25-500
ppm)
ISA-RP92.03.02-1999 - Installation, Operation, and Maintenance of Ammonia Detection
Instruments (25-500 ppm Full Scale)
ANSI/ISA-92.04.01, Part I-2007 - Performance Requirements for Instruments Used to Detect
Oxygen-Deficient/Oxygen-Enriched Atmospheres
ISA-RP92.04.02, Part II-1996 - Installation, Operation, and Maintenance of Instruments Used
to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres
ISA-92.06.01-1998 - Performance Requirements for Chlorine Detection Instruments (0.5-30
ppm Full Scale)
ISA-RP92.06.02-1999 - Installation, Operation, and Maintenance of Chlorine Detection
Instruments (0.5-30 ppm Full Scale)
ANSI/ISA-TR92.06.03-1999 - Feasibility of Chlorine Detection Instrument Testing
ANSI/ISA-93.00.01-1999 - Standard Method for the Evaluation of External Leakage of Manual
and Automated On-Off Valves
ANSI/ISA-95.00.01-2000 - Enterprise-Control System Integration - Part 1: Models and
Terminology
ANSI/ISA-95.00.02-2001 - Enterprise-Control System Integration - Part 2: Object Model
Attributes
ANSI/ISA-95.00.03-2005 - Enterprise-Control System Integration - Part 3: Activity Models of
Manufacturing Operations Management
ANSI/ISA-95.00.05-2007 - Enterprise-Control System Integration - Part 5: Business-toManufacturing Transactions
ISA-MC96.1-1982 - Temperature Measurement Thermocouples
ANSI/ISA-98.00.01-2002 - Qualifications and Certification of Control Systems Technicians
ISA-TR98.00.02-2006, Skill Standards for Control System Technicians
ANSI/ISA-TR99.00.01-2004 - Security Technologies for Manufacturing and Control Systems
ANSI/ISA-TR99.00.02-2004 - Integrating Electronic Security into the Manufacturing and
Control Systems Environment
ISA-TR100.00.01-2006 - The Automation Engineer’s Guide to Wireless Technology Part 1 -The Physics of Radio, a Tutorial
ANSI/ISA-61804-3 (104.00.01)-2007, Function Blocks (FB) For Process Control – Part 2:
Electronic Device Description Language
ANSI/ISA-TR61804-4 (104.00.02)-2007, Function Blocks (FB) for Process Control – Part 4:
EDD Interoperability Guideline