Common Rail injector control valve F00R J01 159 #Diesel VE Pump 4G33T-180001Q# #Diesel VE Pump 4L68-180031K# #New Fuel Suction Control Valve F00N210223# #New Fuel Suction Control Valve A6860-VM09A# (8AU) Whats--App 86--1--3--3--8--6--9--0--1--3--1--5 Doney----(at)----china-lutong---(dot)----net How does a fuel injector valve work? Injection valves comprise a valve body, which houses a magnet winding and a guide for the nozzle needle, and a nozzle needle with magnet armature. When the control unit applies voltage to the magnet winding, the nozzle needle rises up from its valve seat and releases a precision bore hole. How To Pick The Perfect Engine Rebuild Kits Not satisfied with the performance of your engine anymore? Well, there are many things that you can do in order to bring back the powerful character of your car engine. China Lutong to be a supplier ( Passed ISO9001:2015 )for diesel fuel injection parts, Such as common rail nozzles,Common rail injectors, Cat Injectrs, Unit injector,EUP EUI parts etc. HOW TO REPLACE A FUEL INJECTOR STEP-BY-STEP FUEL INJECTOR REPLACEMENT Before starting the job, check your vehicle’s manual for the specific instructions on how to change fuel injectors and any parts that require removal beforehand. STEP 1: ACCESS THE FUEL INJECTORS There are several parts that interfere with injector removal that need to be moved or taken off first. It can include the air filter box, intake plenum, engine covers, wiring harnesses, and more. Your vehicle manual will be invaluable at this stage. STEP 2: DETACH THE FUEL RAIL AND REMOVE INJECTORS Next, disconnect the fuel rail if required, or unfasten it and move it if that’s possible. Injectors have a seal that’s a snug fit into the fuel rail, so they may come out with the rail, or the fuel rail may need to be wiggled free from the injectors. Gently wiggle and pull the affected injector out of its mounting location. STEP 3: INSPECT AND CLEAN Check the injector ports for debris and clean if required. This helps the new injector seal properly and avoids introducing dirt and debris into the engine. STEP 4: INSTALL NEW INJECTORS Apply some clean engine oil to lubricate the new fuel injector o-rings, then install them. Attach the fuel rail afterward. STEP 5: REASSEMBLE Re-install and connect any electrical items or parts that you removed during disassembly, ensuring each part is fully seated and secured. A: Products quality is most important to us our factory alwalys supply good and stable quality products. We never sell used or secondhand or remanufacture products. Q: How do i pay for? A: Accept TT LC Western Paypal Q: How to find us? A: Products quality is most important to us our factory alwalys supply good and stable quality products. We never sell used or secondhand or remanufacture products. Q: How do i pay for? A: Accept TT LC Western Paypal Q: How to find us?
