IS200ISBEH1A - ISBus Extender Board
worldofcontrols.com/is200isbeh1a-insync-bus-extender
SPECIFICATIONS
Part No.: IS200ISBEH1A
Manufacturer: General Electric
Country of Manufacture: United States of America (USA)
Connection Interface: J11A and J12A
Mounting: DIN rail mounting
Operator Interface: PC-based HMI and CIMPLICITY
Protective Coating: Conformal coating
LED Indicators: DS1, DS2, DS3, DS4
Customizable Jumper: One
Product Type: ISBus Extender Board
Availability: In Stock
Series: EX2100
Functional Description
IS200ISBEH1A is an ISBus Extender Board developed by GE. It is a part of EX2100
excitation system. It is a component of the ISBus High-Speed Synchronous
Communication System, designed to enhance communication and control. This board is
particularly compatible with the Mark VI series of Speedtronic drive components, which
are integral to the control, protection, and monitoring of industrial gas and steam turbines.
Features
PC-Based HMI Operator Interface: Utilizes a Microsoft Windows platform preloaded
with GE CIMPLICITY software, allowing for reinitialization or replacement without
impacting other processes.
Connection Interface: Typically connects to the J11A interface on the CAPB Control
Assembly Backplane board and can also mate with the J12A interface. It features
six inputs/outputs located on opposite edges of the board.
DIN Rail Mounting: The board is designed for mounting on DIN rails, ensuring
stability and ease of installation.
Optical Performance: Compatible with various I/O component options, including STtype connected Hard Clad Silica (HCS) fiber or glass fiber connectors.
Terminal Strips and Connectors: Includes small terminal strips on each edge, with
two plug connectors and two fiber-optic connectors.
Components and Indicators
1/2
Conformal Coating: Protects the board components, providing a lightweight and thin
layer of protection across the entire board face.
LED indicators offer valuable information about the drive's functioning status: DS1 is
a green LED indicating 24V DC power availability, DS2 is a yellow LED for transmit
data input labeled XMIT DATA IN, DS3 is a green LED indicating an active interlock,
and DS4 is a green LED indicating correct optical data reception.
Functional Capabilities
Signal Processing: Converts received optical input data into electrical signals and
then reconfigures them into optical output signals.
Transmit Signal Conditioning: Involves input signal isolation, termination, bypass
multiplexing, and electrical-to-optical conversion.
Operational Integrity: Maintains its operation without the need for fuses or test
points, aside from the customizable hardware jumper.
The WOC team is always available to help you with your EX2100 requirements. For more
information, please contact WOC.
Frequently Asked Questions
What is IS200ISBEH1A?
It is an ISBus Extender Board developed by GE under the EX2100 series.
How does the card connect within the system?
Typically, it connects to the J11A interface on the CAPB Control Assembly Backplane
board and can also mate with the J12A interface. It features six inputs/outputs located on
opposite edges of the board.
What type of operator interface does the board use?
It uses a PC-based HMI operator interface with a Microsoft Windows platform preloaded
with GE’s CIMPLICITY software. This setup allows reinitialization or replacement without
affecting other processes.
What are the optical performance capabilities?
It is compatible with various I/O component options, including ST-type connected Hard
Clad Silica (HCS) fiber or glass fiber connectors, ensuring robust optical performance.
2/2