Uploaded by marvado4

TEST REPORT FEILONG

advertisement
TEST REPORT
ISO15502:2005
Household refrigerating appliances-Characteristics and test methods
Report Number.............................. : XB-11-0538
Tested by (name + signature) ......... : Cheng Lin 程琳
Approved by (name + signature)..... : Song Tao 宋涛
Date of issue................................... :2016-09-27
Total number of pages..................... :10
Testing Laboratory ....................... : Hefei Meiling Company Central Lab
Address .......................................... : No. 2163, Lianhua Road, Economy-technology
Development Zone, Hefei, Anhui, China
Test specification:
Standard......................................... : ISO15502:2005,GB4706.1-2005,GB4706.13-2008,GB/T8059 .1-1995.
Non-standard test method…………..: N/A
Test Report Form(s) Originator ....... : ISO15502 2005
IEC60335-2-24 2010
Test item description.................... : Storage temperature, energy efficiency, freezing capacity
Trade Mark ................................. : FRIGIDAIRE
Manufacturer .............................. : ELECTROLUX HOME PRODUCTS, INC.
Address ...................................... : 10200 David Taylor Drive Charlotte, NC 28262 United States
Model/Type reference ................ : FRTM13G3HPS, FRTM32G3HPS, FRTS15K3HRS, FRSO52B3HQS
FRSO52B3HQS
Ratings ...........................................: 115Vac, 60 Hz, 1.35 A,ST, R134a/150g
Page 2 of 10
Report No.: XB-11-0538
Summary of testing:
Tests performed (name of test and test clause):
Testing location:
The tests were performed according to the
standards of GB4706.1-2005, GB4706.13-2008,
GB/T8059.1-1995.
The energy consumption of reference fell into the
range C according to regulation ISO 15502:2005
(Energy efficiency index 66.3%).
Hefei Meiling Company Limited
No. 2163, Lianhua Road, Economy-technology
Development Zone, Hefei, Anhui, China
Copy of marking plate
Rated Voltage
115V
Rated Frequency
60Hz
Climate Classification
ST
Rated Current
1.35A
Rated Power
118W
Refrigerant
R134a
Amount
150g
Total Gross Volume
146 L
Total Storage Volume
140L
Total Refrigrator Storage Volume
120L
Total Freezer Storage Volume
20L
Temperature of freezer compartment
-18 C
Electric Shock
I
Insulation Blowing Agent
Cyclopentane
Energy Consumption
288.35kW.h/y
Compressor
ASZ51U6
Energy Efficiency
C
Page 3 of 10
Test item particulars.............................................
:
Report No.: XB-11-0538
Refrigerator
Classification of installation and use........................ :
Stationary appliance for indoor use
Supply Connection.................................................. :
Supply cord with plug
Overall dimensions (mm)........................................ :
Overall space required in use (mm)......................... :
Possible test case verdicts:
- test case does not apply to the test object........ ......: N/A
- test object does meet the requirement ...................:
P (Pass)
- test object does not meet the requirement .............:
F (Fail)
Testing ...................................................................:
Date of receipt of test item.......................................:
Date (s) of performance of tests...............................:
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a comma is used as the decimal separator.
General product information:
The unit tested is a refrigerator for household and indoor use only.
The appliances are fitted with the compressor
Model
are similar except the enclosure color.
Model ( ASZ51U6
) was subject to test.
Page 4 of 10
Report No. XB-11-0538
ISO 15502:2005
Clause
Requirement + Test
5
GENERAL CONDITIONS
5.1
The design and manufacture of the devices must
be such that if they are in normal operation, they
operate safely and there are no misalignments,
deformations or cracks that could endanger people
Result - Remark
Verdict
P
The materials which are manufactured artifacts
should be appropriate for the use destined and
should be resistant to mechanical, physical and
chemical conditions which have been subjected
P
The appliances must be manufactured in such way
to ensure an adequate performance and durability
in use
P
5.4
The design and manufactures of components to be
assembled by the user or installer must be so that,
following the manufacture’s instructions operates
correctly for intended purpose. These components
must be supplied with instructions for their
installation, regulation, use and maintenance
N/A
6
SPECIFIC REQUIREMENTS
6.1
The materials used in the appliances must not
transmit odor and flavor at food, and transmit toxic
substances at food
P
The material used in the appliances must be
resistant at chemical reaction of food’s components
P
6.3
All materials, metallic parts and components must
be resistant at action of the humidity and corrosion
N/A
6.4
All surface finish, parts and components must be
resistant, easily washable, must be so that the
manufacture construction and operation don’t alter
in normal conditions of use, when are correctly
installed and maintenance according with
manufacture’s instructions. In individual, all the
components parts of the appliance must be to
resist to the mechanical actions, chemical (food)
and thermal that they can be put under during its
operating and use
6.5
The thermal isolation of the refrigerators must be
Cyclopentane
efficient and permanently preserved. Those made
with an espumante agent must not contain CFC’s
(Freon). The isolation materials must not be under
contraction and don’t to permit in normal conditions
excessive humidity accumulation
5.2
5.3
6.2
6.6
The flowed cooling used as cooling form of
refrigeration systems must be ecologist and don’t
contain CFC’s
P
Refrigerant: R134a
P
P
Page 5 of 10
Report No. XB-11-0538
ISO 15502:2005
Clause
Requirement + Test
6.7
In normal conditions of use, clean or
adjustment ,the materials and components parts
must not show any alteration that obstruct the
operation of the appliance
P
6.8
The regulators of temperature control, if consider
that will go operate for user, must be easily
accessible and its operation must be so that permit
at appliance fulfillment with requirements of test of
performance
P
6.9
6.10
6.11
6.12
6.13
6.14
6.15
Result - Remark
The surface of heat interchange must be do of
resistance material at corrosion, with covering don’t
toxic on approval of corrosion, resistant to changes
of temperature
The manufacture of an appliance must be realize in
such a way that during its used or after, in normal
conditions of use , don’t show : a) displacement of
parts and pieces, b) deformations and c)
deteriorations obstruct its operation
The components can not be
All components and parts installed or adjusted in
factory which shall not be manipulated by the users opened by the users without
use of tool.
or installer, must not protected
The appliances must have a device for collect all
water in the moment of defrost, can be internal
removable or external in that defrost water
evaporates and a drainage system design as that
assure its appropriate function
The hinges and handle must be hard and resistant
at corrosion, the subjection system must be able of
keep its specific function, must permit at the door
to be open or close easily
The grid, container and similar components must
be a mechanical resistance appropriate. Those that
are considered for removable, subjection must be
able of keep its complete move when these are
charges.
Instructions Manual: All appliance must be
commercialized with an instruction manual of use
and maintenance for user, these instructions must
be write in Spanish and in compressible terms,
must be contain
Verdict
P
P
P
P
P
P
P
Page 6 of 10
Report No. XB-11-0538
ISO 15502:2005
Clause
Requirement + Test
7
LABEL
7.1
Label and package shall be written in Spanish
clearly
7.2
The following information shall be included in the
label
7.2.1
Name of manufacturer
7.2.2
Legend that indicate its origin country
7.2.3
Number of serial and/or manufactured date
P
7.2.4
Gross volume in decimeters cubic or in liters
P
7.2.5
Climate type (ST,T)
P
7.2.6
Refrigerant designation and mass in g
7.2.7
All information about source energy, voltage,
potency, frequency
Result - Remark
Verdict
P
P
P
MADE IN U.S.A.
P
P
115 Vac, 60 Hz,1.35 A
P
7.2.8
Freezing capacity in kg, if applicable
P
7.2.9
Energy consumption, in kw-h/year
P
7.3
Packing
P
7.3.1
Model No.
P
7.3.2
The serial number and/or date of manufacture,
which can be codified
P
7.3.3
Symbol or class ST or T
ST
P
7.3.4
Voltage and frequency
Specific requirements
115 Vac, 60 Hz
P
6.1
-
Materials, design and manufacturing
General Information
-
Adequate performance y durability in its usage
P
P
6.1.1.2
Item defines several characteristics are addressed
to the attention of the manufacturer.
Refrigerating system, materials and finishes.
6.1.1.3
Thermal Isolated and air tightness
P
6.1.1.4
3) Doors, covers and accessories
P
6.1.1.5
Grid and containers
P
6.1.1.6
disposition of the defrosted water
P
6.1.1.7
Refrigerating system
P
6.1. 2.
Product Requirements
-
6.1.2.1
Volume and area
6.1.1
6.1.1.1
-
P
P
Page 7 of 10
Report No. XB-11-0538
ISO 15502:2005
Clause
Requirement + Test
6.1.2.2
Performance Characteristics
-
-
Storage temperature
P
-
Freezer able
P
-
Able for ice manufacture
N/A
-
Energy consumption
P
Time arise of temperature
P
-
Result - Remark
Verdict
-
8
Test Methods
8.1.1
Dimensions(mm)
495×577×1441
P
8.1.2.1
Gross Volume
Measured value: 159L
P
8.1.2.2
Total storage volume
Measured value: 146L
P
8.1.3
Determine Storage grid areas
dm
8.3
Tests of tightness of door or cover seal
Ambient temperature:
32ć˗
A strip of paper 50 mm and
0,08 mm thickness and of
suitable length used
P
8.4
Test of the opening force of the door or cover
Ambient temperature:
32ć˗
The door was opened from
inside before the force of 70 N
P
Test of the durability of the hinges and handles
doors and covers
Ambient temperature:
32ć ;
The doors of fresh-food and
frozen food compartment can
withstand the relevant opening
and closing operations
8.6
Test of mechanical strength of the grids or similar
components
Ambient temperature:
32ć ;
The shelves can withstand the
loading test accordingly for 1
h
P
8.7
Test of storage temperature
(see appended table)
P
8.8
Water vapour condensation test
Ambient temperature:
32ć ;
No fog and droplet on external
surface
P
8.9
Energy consumption test
(see appended table)
P
8.10
Temperature rise test, if applicable
N/A
8.11
Freezing test, if applicable
N/A
8.13
Test of the absence of smell and taste
8.5
2
Ambient temperature:
32 ć ;
Mark 1: slight foreign odour
P
P
P
Page 8 of 10
Test data table:
Report No. XB-11-0538
Table for dimensions and volumes
P
Gross volume details:
Item
Measured gross
volume (L)
Total gross volume
146
Rated gross
volume(L)
146
Storage volume details:
Item
Fresh food
Freezer
Total storage volume
Measured storage
volume (L)
140
Deviation
Required deviation
0
>=-3%
Deviation
P
Rated storage
volume (L)
140
Required deviation
>=-3%
>=-3%
>=-3%
0
Storage temperature test
Ambient temperature
38ć
Control setting
Temperature of freshfood compartment
N/A
Temperature of frozenfood compartment
t1 = –21.32 ć ; t2= –21.92ć ; t3 =-21.96 ć ; t4= -22.70 ć
t5 = -22.50 ć ; t6= -23.39ć ; t7 = -21.99 ć ; t8= -20.09 ć ; Tmax= -18ć
Ambient temperature
16ć
Temperature of freshfood compartment
N/A
Temperature of frozenfood r compartment
t1 = –19.90 ć ; t2= –20.72ć ; t3 =-20.56ć ; t4=-21.54ć
t5 = -21.75 ć ; t6= -23.01ć ; t7 = -21.08 ć ; t8= -18.09 ć ; Tmax= -18ć
Control setting
3.6/4
3.8/4
Page 9 of 10
Energy consumption test
Ambient temperature
Test voltage
25ć
115 V, 60 Hz
Relative humidity
Energy efficiency
Compartment temperature
(fresh-food compartment)
Compartment temperature
(frozen-food compartment)
Control setting
C
N/A
t1 = –19.48 ć ; t2= –21.46ć ;
t3 = -17.98ć ; t4=-22.00ć
t5 =-19.74 ć ; t6=-21.78ć ;
t7 =-22.24 ć ; t8= -21.44 ć ;
Tmax= -18ć
3.6
Report No. XB-11-0538
Page 10 of 10
Photos:
Product general front view
Product general back view
Product general front view with door open
(End of report)
Report No. XB-11-0538
TEST REPORT
ISO15502:2005
Household refrigerating appliances-Characteristics and test methods
Report Number.............................. : PZXB-11-1084
Tested by (name + signature) ......... : Chen Jian
Approved by (name + signature)..... : Ye Qing
Date of issue................................... :2016-08-03
Total number of pages..................... :10
Testing Laboratory ....................... : Hefei Meiling QC Lab in Factory No. 1
Address .......................................... : No. 2163, Lianhua Road, Economy-technology
Development Zone, Hefei, Anhui, China
Test specification:
Standard......................................... : ISO15502:2005,GB4706.1-2005,GB4706.13-2008,GB/T8059 .1-1995.
Non-standard test method…………..: N/A
Test Report Form(s) Originator ....... : ISO15502 2005
IEC60335-2-24 2010
Test item description.................... : Storage temperature, energy efficiency, freezing capacity
Trade Mark ..................................... : FRIGIDAIRE
Manufacturer .................................. : ELECTROLUX HOME PRODUCTS, INC.
Address .......................................... : 10 200 David Taylor D rive Charlotte, NC 28262 United States
Model/Type reference ........... : FFCC07C3HQW, FFCC09C3HQW, FFCC07A3HQW, FFCC05C3HQW
Ratings ...........................................:
115Vac, 60 Hz, 1.1 A,ST, R134a/260g
Page 2 of 10
Report No.: PZXB-11-1084
Summary of testing:
Tests performed (name of test and test clause):
Testing location:
The tests were performed according to the
standards of GB4706.1-2005, GB4706.13-2008,
GB/T8059.1-1995.
The energy consumption of reference fell into the
range B according to regulation ISO 15502:2005
(Energy efficiency index 63.4%).
Hefei Meiling Company Limited
No. 2163, Lianhua Road, Economy-technology
Development Zone, Hefei, Anhui, China
Copy of marking plate
Rated Voltage
115V
Rated Frequency
60Hz
Climate Classification
ST
Rated Current
1.1A
Rated Power
111W
Refrigerant
R134a
Amount
260g
Total Gross Volume
263L
Total Storage Volume
255L
Total Refrigrator Storage Volume
0L
Total Freezer Storage Volume
255L
Temperature of freezer compartment
-18 C
Electric Shock
I
Insulation Blowing Agent
Cyclopentane
Energy Consumption
335.33 kW.h/y
Compressor
ASF51U6
Energy Efficiency
B
Page 3 of 10
Report No.:PZXB-11-1084
Test item particulars............................................. :
Refrigerator
Classification of installation and use........................ :
Stationary appliance for indoor use
Supply Connection.................................................. :
Supply cord with plug
Overall dimensions (mm)........................................ :
Overall space required in use (mm)......................... :
Possible test case verdicts:
- test case does not apply to the test object........ ......: N/A
- test object does meet the requirement ...................:
P (Pass)
- test object does not meet the requirement .............:
F (Fail)
Testing ...................................................................:
Date of receipt of test item.......................................:
Date (s) of performance of tests...............................:
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a comma is used as the decimal separator.
General product information:
The unit tested is a refrigerator for household and indoor use only.
The appliances are fitted with the compressor
Model
are similar except the enclosure color.
Model ( ASF51U6
) was subject to test.
Page 4 of 10
Report No.PZXB-11-1084
ISO 15502:2005
Clause
Requirement + Test
5
GENERAL CONDITIONS
5.1
The design and manufacture of the devices must
be such that if they are in normal operation, they
operate safely and there are no misalignments,
deformations or cracks that could endanger people
Result - Remark
Verdict
P
The materials which are manufactured artifacts
should be appropriate for the use destined and
should be resistant to mechanical, physical and
chemical conditions which have been subjected
P
The appliances must be manufactured in such way
to ensure an adequate performance and durability
in use
P
5.4
The design and manufactures of components to be
assembled by the user or installer must be so that,
following the manufacture’s instructions operates
correctly for intended purpose. These components
must be supplied with instructions for their
installation, regulation, use and maintenance
N/A
6
SPECIFIC REQUIREMENTS
6.1
The materials used in the appliances must not
transmit odor and flavor at food, and transmit toxic
substances at food
P
The material used in the appliances must be
resistant at chemical reaction of food’s components
P
6.3
All materials, metallic parts and components must
be resistant at action of the humidity and corrosion
N/A
6.4
All surface finish, parts and components must be
resistant, easily washable, must be so that the
manufacture construction and operation don’t alter
in normal conditions of use, when are correctly
installed and maintenance according with
manufacture’s instructions. In individual, all the
components parts of the appliance must be to
resist to the mechanical actions, chemical (food)
and thermal that they can be put under during its
operating and use
6.5
The thermal isolation of the refrigerators must be
Cyclopentane
efficient and permanently preserved. Those made
with an espumante agent must not contain CFC’s
(Freon). The isolation materials must not be under
contraction and don’t to permit in normal conditions
excessive humidity accumulation
5.2
5.3
6.2
6.6
The flowed cooling used as cooling form of
refrigeration systems must be ecologist and don’t
contain CFC’s
P
Refrigerant: R134a
P
P
Page 5 of 10
Report No.PZXB-11-1084
ISO 15502:2005
Clause
Requirement + Test
6.7
In normal conditions of use, clean or
adjustment ,the materials and components parts
must not show any alteration that obstruct the
operation of the appliance
P
6.8
The regulators of temperature control, if consider
that will go operate for user, must be easily
accessible and its operation must be so that permit
at appliance fulfillment with requirements of test of
performance
P
6.9
The surface of heat interchange must be do of
resistance material at corrosion, with covering don’t
toxic on approval of corrosion, resistant to changes
of temperature
P
6.10
6.11
6.12
6.13
6.14
6.15
Result - Remark
The manufacture of an appliance must be realize in
such a way that during its used or after, in normal
conditions of use , don’t show : a) displacement of
parts and pieces, b) deformations and c)
deteriorations obstruct its operation
The components can not be
All components and parts installed or adjusted in
factory which shall not be manipulated by the users opened by the users without
use of tool.
or installer, must not protected
The appliances must have a device for collect all
water in the moment of defrost, can be internal
removable or external in that defrost water
evaporates and a drainage system design as that
assure its appropriate function
The hinges and handle must be hard and resistant
at corrosion, the subjection system must be able of
keep its specific function, must permit at the door
to be open or close easily
The grid, container and similar components must
be a mechanical resistance appropriate. Those that
are considered for removable, subjection must be
able of keep its complete move when these are
charges.
Instructions Manual: All appliance must be
commercialized with an instruction manual of use
and maintenance for user, these instructions must
be write in Spanish and in compressible terms,
must be contain
Verdict
P
P
P
P
P
P
Page 6 of 10
Report No.PZXB-11-1084
ISO 15502:2005
Clause
Requirement + Test
7
LABEL
7.1
Label and package shall be written in Spanish
clearly
7.2
The following information shall be included in the
label
7.2.1
Name of manufacturer
7.2.2
Legend that indicate its origin country
7.2.3
Number of serial and/or manufactured date
P
7.2.4
Gross volume in decimeters cubic or in liters
P
7.2.5
Climate type (ST,T)
P
7.2.6
Refrigerant designation and mass in g
7.2.7
All information about source energy, voltage,
potency, frequency
Result - Remark
Verdict
P
P
P
MADE IN U.S.A.
P
P
115 Vac, 60 Hz, 1.1A
P
7.2.8
Freezing capacity in kg, if applicable
P
7.2.9
Energy consumption, in kw-h/year
P
7.3
Packing
P
7.3.1
Model No.
P
7.3.2
The serial number and/or date of manufacture,
which can be codified
P
7.3.3
Symbol or class ST or T
ST
P
7.3.4
Voltage and frequency
Specific requirements
115 Vac, 60 Hz
P
6.1
-
Materials, design and manufacturing
General Information
-
Adequate performance y durability in its usage
P
P
6.1.1.2
Item defines several characteristics are addressed
to the attention of the manufacturer.
Refrigerating system, materials and finishes.
6.1.1.3
Thermal Isolated and air tightness
P
6.1.1.4
3) Doors, covers and accessories
P
6.1.1.5
Grid and containers
P
6.1.1.6
disposition of the defrosted water
P
6.1.1.7
Refrigerating system
P
6.1. 2.
Product Requirements
-
6.1.2.1
Volume and area
6.1.1
6.1.1.1
-
P
P
Page 7 of 10
Report No.PZXB-11-1084
ISO 15502:2005
Clause
Requirement + Test
6.1.2.2
Performance Characteristics
-
-
Storage temperature
P
-
Freezer able
P
-
Able for ice manufacture
N/A
-
Energy consumption
P
Time arise of temperature
P
-
Result - Remark
Verdict
-
8
Test Methods
8.1.1
Dimensions(mm)
595×614×1765
P
8.1.2.1
Gross Volume
Measured value: 263L
P
8.1.2.2
Total storage volume
Measured value: 255L
P
8.1.3
Determine Storage grid areas
dm
8.3
Tests of tightness of door or cover seal
Ambient temperature:
32ć˗
A strip of paper 50 mm and
0,08 mm thickness and of
suitable length used
P
8.4
Test of the opening force of the door or cover
Ambient temperature:
32ć˗
The door was opened from
inside before the force of 70 N
P
Test of the durability of the hinges and handles
doors and covers
Ambient temperature:
32ć ;
The doors of fresh-food and
frozen food compartment can
withstand the relevant opening
and closing operations
8.6
Test of mechanical strength of the grids or similar
components
Ambient temperature:
32ć ;
The shelves can withstand the
loading test accordingly for 1
h
P
8.7
Test of storage temperature
(see appended table)
P
8.8
Water vapour condensation test
Ambient temperature:
32ć ;
No fog and droplet on external
surface
P
8.9
Energy consumption test
(see appended table)
P
8.10
Temperature rise test, if applicable
N/A
8.11
Freezing test, if applicable
N/A
8.13
Test of the absence of smell and taste
8.5
2
Ambient temperature:
32 ć ;
Mark 1: slight foreign odour
P
P
P
Page 8 of 10
Test data table:
Report No.PZXB-11-1084
Table for dimensions and volumes
P
Gross volume details:
Item
Measured gross
volume (L)
Rated gross
volume(L)
263
263
Total gross volume
Storage volume details:
Item
Deviation
>=-3%
Deviation
Measured storage
volume (L)
Fresh food
Freezer
Total storage volume
255
Rated storage
volume (L)
255
Required deviation
P
Required deviation
>=-3%
>=-3%
>=-3%
Storage temperature test
Ambient temperature
38ć
Temperature of freshfood compartment
N/A
Control setting
close to max
Temperature of frozenfood compartment
t1 = –20.92 ć ; t2= –20.07ć ; t3 =–22.42 ć ; t4= –22.90 ć t5 =–23.27 ć ; t6= –24.07ć ;
t7 =–23.25 ć ; t8= –24.35 ć ; t9= –24.25 ć ; t10=-21.47 ć ; t11=-22.00 ć ;Tmax= -18ć
Ambient temperature
16ć
Temperature of freshfood compartment
N/A
Temperature of frozenfood r compartment
N/A
Control setting
Page 9 of 10
Report No.PZXB-11-1084
Energy consumption test
Ambient temperature
Test voltage
25ć
115 V, 60 Hz
Relative humidity
Energy Efficiency
B
Compartment temperature
(fresh-food compartment)
N/A
Compartment temperature
(frozen-food compartment)
Control setting
N/A
Tmax= –18.97 ć;
Tmax= –17.75 ć
E1=0.9608kwh/24h
E2=0.9078kwh/24h
close to max
close to max
Page 10 of 10
Photos:
Product general front view
Product general back view
Product general front view with door open
(End of report)
Report No.PZXB-11-1084
TEST REPORT
ISO15502:2005
Household refrigerating appliances-Characteristics and test methods
Report Number.............................. : XB-11-0546
Tested by (name + signature) ......... : Cheng Lin 程琳
Approved by (name + signature)..... : Dai Hong
戴红
Date of issue................................... :2016-08-31
Total number of pages..................... :10
Testing Laboratory ....................... : Hefei Meiling Company Central Lab
Address .......................................... : No. 2163, Lianhua Road, Economy-technology
Development Zone, Hefei, Anhui, China
Test specification:
Standard......................................... : ISO15502:2005,GB4706.1-2005,GB4706.13-2008,GB/T8059 .1-1995.
Non-standard test method…………..: N/A
Test Report Form(s) Originator ....... : ISO15502 2005
IEC60335-2-24 2010
Test item description.................... : Storage temperature, energy consumption, freezing capacity
Trade Mark ..................................... : FRIGIDAIRE
Manufacturer .................................. : ELECTROLUX HOME PRODUCTS, INC.
Address ........................................... : 10 200 David Taylor D rive Charlotte, NC 28262 United States
Model/Type reference ..................... : FFCD09C4HRW, FFCC11C3HQW, FFCC13C3HQW
Ratings ...........................................:
115Vac, 60 Hz, 1.43A,ST, R134a/110g
Page 2 of 10
Report No.: XB-11-0546
Summary of testing:
Tests performed (name of test and test clause):
Testing
The tests
werelocation:
performed according to the
standards of GB4706.1-2005, GB4706.13-2008,
GB/T8059.1-1995.
The energy consumption of reference fell into the
range B according to regulation ISO 15502:2005
(Energy efficiency index 63.2%).
Hefei Meiling Company Limited
No. 2163, Lianhua Road, Economy-technology
Development Zone, Hefei, Anhui, China
Copy of marking plate
Rated Voltage
115V
Rated Frequency
60Hz
Climate Classification
ST
Rated Current
1.43A
Rated Power
138W
Refrigerant
R134a
Amount
110g
Total Gross Volume
400L
Total Storage Volume
380L
Total Refrigrator Storage Volume
0L
Total Freezer Storage Volume
380L
Temperature of freezer compartment
-18 C
Electric Shock
I
Insulation Blowing Agent
Cyclopentane
Energy Consumption
350.4kW.h/y
Compressor
ASF51U6
Energy Efficiency
B
Page 3 of 10
Report No.: XB-11-0546
Test item particulars............................................. :
Refrigerator
Classification of installation and use........................ :
Stationary appliance for indoor use
Supply Connection.................................................. :
Supply cord with plug
Overall dimensions (mm)........................................ :
Overall space required in use (mm)......................... :
Possible test case verdicts:
- test case does not apply to the test object........ ......: N/A
- test object does meet the requirement ...................:
P (Pass)
- test object does not meet the requirement .............:
F (Fail)
Testing ...................................................................: Storage temperature, energy consumption, freezing capacity
Date of receipt of test item.......................................:
Date (s) of performance of tests...............................:
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a comma is used as the decimal separator.
General product information:
The unit tested is a refrigerator for household and indoor use only.
The appliances are fitted with the compressor
Model
are similar except the enclosure color.
Model ( ASF51U6 ) was subject to test.
Page 4 of 10
Report No. XB-11-0546
ISO 15502:2005
Clause
Requirement + Test
5
GENERAL CONDITIONS
5.1
The design and manufacture of the devices must
be such that if they are in normal operation, they
operate safely and there are no misalignments,
deformations or cracks that could endanger people
Result - Remark
Verdict
P
The materials which are manufactured artifacts
should be appropriate for the use destined and
should be resistant to mechanical, physical and
chemical conditions which have been subjected
P
The appliances must be manufactured in such way
to ensure an adequate performance and durability
in use
P
5.4
The design and manufactures of components to be
assembled by the user or installer must be so that,
following the manufacture’s instructions operates
correctly for intended purpose. These components
must be supplied with instructions for their
installation, regulation, use and maintenance
N/A
6
SPECIFIC REQUIREMENTS
6.1
The materials used in the appliances must not
transmit odor and flavor at food, and transmit toxic
substances at food
P
The material used in the appliances must be
resistant at chemical reaction of food’s components
P
6.3
All materials, metallic parts and components must
be resistant at action of the humidity and corrosion
N/A
6.4
All surface finish, parts and components must be
resistant, easily washable, must be so that the
manufacture construction and operation don’t alter
in normal conditions of use, when are correctly
installed and maintenance according with
manufacture’s instructions. In individual, all the
components parts of the appliance must be to
resist to the mechanical actions, chemical (food)
and thermal that they can be put under during its
operating and use
6.5
The thermal isolation of the refrigerators must be
Cyclopentane
efficient and permanently preserved. Those made
with an espumante agent must not contain CFC’s
(Freon). The isolation materials must not be under
contraction and don’t to permit in normal conditions
excessive humidity accumulation
5.2
5.3
6.2
6.6
The flowed cooling used as cooling form of
refrigeration systems must be ecologist and don’t
contain CFC’s
P
Refrigerant: R134a
P
P
Page 5 of 10
Report No. XB-11-0546
ISO 15502:2005
Clause
Requirement + Test
6.7
In normal conditions of use, clean or
adjustment ,the materials and components parts
must not show any alteration that obstruct the
operation of the appliance
P
6.8
The regulators of temperature control, if consider
that will go operate for user, must be easily
accessible and its operation must be so that permit
at appliance fulfillment with requirements of test of
performance
P
6.9
The surface of heat interchange must be do of
resistance material at corrosion, with covering don’t
toxic on approval of corrosion, resistant to changes
of temperature
P
6.10
6.11
6.12
6.13
6.14
6.15
Result - Remark
The manufacture of an appliance must be realize in
such a way that during its used or after, in normal
conditions of use , don’t show : a) displacement of
parts and pieces, b) deformations and c)
deteriorations obstruct its operation
The components can not be
All components and parts installed or adjusted in
factory which shall not be manipulated by the users opened by the users without
use of tool.
or installer, must not protected
The appliances must have a device for collect all
water in the moment of defrost, can be internal
removable or external in that defrost water
evaporates and a drainage system design as that
assure its appropriate function
The hinges and handle must be hard and resistant
at corrosion, the subjection system must be able of
keep its specific function, must permit at the door
to be open or close easily
The grid, container and similar components must
be a mechanical resistance appropriate. Those that
are considered for removable, subjection must be
able of keep its complete move when these are
charges.
Instructions Manual: All appliance must be
commercialized with an instruction manual of use
and maintenance for user, these instructions must
be write in Spanish and in compressible terms,
must be contain
Verdict
P
P
P
P
P
P
Page 6 of 10
Report No. XB-11-0546
ISO 15502:2005
Clause
Requirement + Test
7
LABEL
7.1
Label and package shall be written in Spanish
clearly
7.2
The following information shall be included in the
label
7.2.1
Name of manufacturer
7.2.2
Legend that indicate its origin country
7.2.3
Number of serial and/or manufactured date
P
7.2.4
Gross volume in decimeters cubic or in liters
P
7.2.5
Climate type (ST,T)
P
7.2.6
Refrigerant designation and mass in g
7.2.7
All information about source energy, voltage,
potency, frequency
Result - Remark
Verdict
P
P
P
MADE IN U.S.A.
P
P
115 Vac, 60 Hz, 1.43 A
P
7.2.8
Freezing capacity in kg, if applicable
N/A
7.2.9
Energy consumption, in kw-h/year
P
7.3
Packing
P
7.3.1
Model No.
P
7.3.2
The serial number and/or date of manufacture,
which can be codified
P
7.3.3
Symbol or class ST or T
ST
P
7.3.4
Voltage and frequency
Specific requirements
115 Vac, 60 Hz
P
6.1
-
Materials, design and manufacturing
General Information
-
Adequate performance y durability in its usage
P
P
6.1.1.2
Item defines several characteristics are addressed
to the attention of the manufacturer.
Refrigerating system, materials and finishes.
6.1.1.3
Thermal Isolated and air tightness
P
6.1.1.4
3) Doors, covers and accessories
P
6.1.1.5
Grid and containers
P
6.1.1.6
disposition of the defrosted water
P
6.1.1.7
Refrigerating system
P
6.1. 2.
Product Requirements
-
6.1.2.1
Volume and area
6.1.1
6.1.1.1
-
P
P
Page 7 of 10
Report No. XB-11-0546
ISO 15502:2005
Clause
Requirement + Test
6.1.2.2
Performance Characteristics
-
-
Storage temperature
P
-
Freezer able
N/A
-
Able for ice manufacture
N/A
-
Energy consumption
P
Time arise of temperature
P
-
Result - Remark
Verdict
-
8
Test Methods
8.1.1
Dimensions(mm)
545×625×1477
P
8.1.2.1
Gross Volume
Measured value: 400L
P
8.1.2.2
Total storage volume
Measured value: 380L
P
8.1.3
Determine Storage grid areas
dm
8.3
Tests of tightness of door or cover seal
Ambient temperature:
32ć˗
A strip of paper 50 mm and
0,08 mm thickness and of
suitable length used
P
8.4
Test of the opening force of the door or cover
Ambient temperature:
32ć˗
The door was opened from
inside before the force of 70 N
P
Test of the durability of the hinges and handles
doors and covers
Ambient temperature:
32ć ;
The doors of fresh-food and
frozen food compartment can
withstand the relevant opening
and closing operations
8.6
Test of mechanical strength of the grids or similar
components
Ambient temperature:
32ć ;
The shelves can withstand the
loading test accordingly for 1
h
P
8.7
Test of storage temperature
(see appended table)
P
8.8
Water vapour condensation test
Ambient temperature:
32ć ;
No fog and droplet on external
surface
P
8.9
Energy consumption test
(see appended table)
P
8.10
Temperature rise test, if applicable
N/A
8.11
Freezing test, if applicable
N/A
8.13
Test of the absence of smell and taste
8.5
2
Ambient temperature:
32 ć ;
Mark 1: slight foreign odour
P
P
P
Page 8 of 10
Test data table:
Report No. XB-11-0546
Table for dimensions and volumes
P
Gross volume details:
Item
Measured gross
volume (L)
Total gross volume
400
Rated gross
volume(L)
Deviation
Required deviation
>=-3%
400
Storage volume details:
P
Deviation
Item
Measured storage
volume (L)
Fresh food
Freezer
Total storage volume
380
Rated storage
volume (L)
Required deviation
>=-3%
>=-3%
>=-3%
380
Storage temperature test
Refrigerator compartment:mid,
freezor comparment:mid-cod
Ambient temperature
38ć
Control setting
Temperature of freshfood compartment
t1(min.) = 3.2 ć ; t1(max.)= 6.7ć
t2(min.) = 2.5 ć ; t2(max.)= 4.3 ć
t3(min.) = 1.5 ć ; t3(max.)= 2.14 ć
0<t1, t2, t3<10ć ; Tm,max= 3.39ć
Temperature of frozenfood compartment
LD1=–22.87℃, LD2=–20.7℃, LD3 =-19.55℃, LD4 =-20.15℃
Ambient temperature
18ć
Temperature of freshfood compartment
t1(min.) = 3 ć ; t1(max.)= 5 ć
t2(min.) = 1.5 ć ; t2(max.)= 3.8ć
t3(min.) = 0.6 ć ; t3(max.)= 2.24 ć
0<t1, t2, t3<10ć ; Tm,max= 2.69ć
Temperature of frozenfood r compartment
LD1=–20.4℃, LD2=–21.87℃, LD3 =-21.45℃, LD4=
-22.27℃
Control setting
Refrigeratorcompartment:midcold, freezor comparment: cod
Page 9 of 10
Report No. XB-11-0546
Energy consumption test
Ambient temperature
25ć
Test voltage
115 V, 60 Hz
Relative humidity
Energy efficiency
Compartment temperature
(fresh-food compartment)
Compartment temperature
(frozen-food compartment)
Control setting
B
t1(min.) = 5 ć ; t1(max.)= 6ć
t2(min.) = 4.2 ć ; t2(max.)= 5.3ć
t3(min.) = 3.3ć ; t3(max.)= 3.92ć
Tm,max=4.62 ć
E1=0,96 kWh/24h
LD1=–20.17℃, LD2=–19.04℃, LD3 =-19.29℃, LD4= -18.89℃
Refrigerator compartment:mid, freezer comparment: cold
Page 10 of 10
Photos:
Product general front view
Product general back view
Product general front view with door open
(End of report)
Report No. XB-11-0546
TEST REPORT
ISO15502:2005
Household refrigerating appliances-Characteristics
and test methods
Report Number.............................. : XB-11-0561
Tested by (name + signature) ......... : Cheng Lin 程琳
Approved by (name + signature)..... : Song Tao 宋涛
Date of issue................................... :2016-10-08
Total number of pages..................... :10
Testing Laboratory ....................... : Hefei Meiling Company Central Lab
Address .......................................... : No. 2163, Lianhua Road, Economy-technology
Development Zone, Hefei, Anhui, China
Test specification:
Standard......................................... : ISO15502:2005,GB4706.1-2005,GB4706.13-2008,GB/T8059.1-1995.
Non-standard test method…………..: N/A
Test Report Form(s) Originator ....... : ISO15502 2005
IEC60335-2-24 2010
Test item description.................... : Storage temperature, energy consumption, freezing capacity
Trade Mark ..................................... : FRIGIDAIRE
Manufacturer .................................. : ELECTROLUX HOME PRODUCTS, INC.
Address .......................................... : 10 200 David Taylor D rive Charlotte, NC 28262 United States
Model/Type reference ..................... : FFFU14F2QW, FFFH20F2QW, FFU14F2QW, FFFH17F2QW
Ratings ...........................................: 115Vac, 60 Hz, 0.98 A,ST, R134a/76g
Page 2 of 10
Report No.: XB-11-0561
Summary of testing:
Tests performed (name of test and test clause):
Testing location:
The tests were performed according to the
standards of GB4706.1-2005, GB4706.13-2008,
GB/T8059.1-1995.
The energy consumption of reference fell into the
range A according to regulation ISO 15502:2005
(Energy efficiency index 45.6%).
Hefei Meiling Company Limited
No. 2163, Lianhua Road, Economy-technology
Development Zone, Hefei, Anhui, China
Copy of marking plate
Rated Voltage
115V
Rated Frequency
60Hz
Climate Classification
ST
Rated Current
0.98A
Rated Power
102W
Refrigerant
R134a
Amount
76g
Total Gross Volume
495L
Total Storage Volume
480L
Total Refrigrator Storage Volume
0L
Total Freezer Storage Volume
480L
Temperature of freezer compartment
-18 C
Electric Shock
I
Insulation Blowing Agent
Cyclopentane
Energy Consumption
215.35 kW.h/y
Compressor
ASF39U6
Energy Efficiency
A
Page 3 of 10
Report No.: XB-11-0561
Test item particulars............................................. :
Refrigerator
Classification of installation and use........................ :
Stationary appliance for indoor use
Supply Connection.................................................. :
Supply cord with plug
Overall dimensions (mm)........................................ :
Overall space required in use (mm)......................... :
Possible test case verdicts:
- test case does not apply to the test object........ ......: N/A
- test object does meet the requirement ...................:
P (Pass)
- test object does not meet the requirement .............:
F (Fail)
Testing ...................................................................:
Date of receipt of test item.......................................:
Date (s) of performance of tests...............................:
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing
laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a comma is used as the decimal separator.
General product information:
The unit tested is a refrigerator for household and indoor use only.
The appliances are fitted with the compressor
Model
are similar except the enclosure color.
Model ( ASF39U6
) was subject to test.
Page 4 of 10
Report No. XB-11-0561
ISO 15502:2005
Clause
Requirement + Test
5
GENERAL CONDITIONS
5.1
The design and manufacture of the devices must
be such that if they are in normal operation, they
operate safely and there are no misalignments,
deformations or cracks that could endanger people
Result - Remark
Verdict
P
The materials which are manufactured artifacts
should be appropriate for the use destined and
should be resistant to mechanical, physical and
chemical conditions which have been subjected
P
The appliances must be manufactured in such way
to ensure an adequate performance and durability
in use
P
5.4
The design and manufactures of components to be
assembled by the user or installer must be so that,
following the manufacture’s instructions operates
correctly for intended purpose. These components
must be supplied with instructions for their
installation, regulation, use and maintenance
N/A
6
SPECIFIC REQUIREMENTS
6.1
The materials used in the appliances must not
transmit odor and flavor at food, and transmit toxic
substances at food
P
The material used in the appliances must be
resistant at chemical reaction of food’s components
P
6.3
All materials, metallic parts and components must
be resistant at action of the humidity and corrosion
N/A
6.4
All surface finish, parts and components must be
resistant, easily washable, must be so that the
manufacture construction and operation don’t alter
in normal conditions of use, when are correctly
installed and maintenance according with
manufacture’s instructions. In individual, all the
components parts of the appliance must be to
resist to the mechanical actions, chemical (food)
and thermal that they can be put under during its
operating and use
6.5
The thermal isolation of the refrigerators must be
Cyclopentane
efficient and permanently preserved. Those made
with an espumante agent must not contain CFC’s
(Freon). The isolation materials must not be under
contraction and don’t to permit in normal conditions
excessive humidity accumulation
5.2
5.3
6.2
6.6
The flowed cooling used as cooling form of
refrigeration systems must be ecologist and don’t
contain CFC’s
P
Refrigerant: R134a
P
P
Page 5 of 10
Report No. XB-11-0561
ISO 15502:2005
Clause
Requirement + Test
6.7
In normal conditions of use, clean or
adjustment ,the materials and components parts
must not show any alteration that obstruct the
operation of the appliance
P
6.8
The regulators of temperature control, if consider
that will go operate for user, must be easily
accessible and its operation must be so that permit
at appliance fulfillment with requirements of test of
performance
P
6.9
The surface of heat interchange must be do of
resistance material at corrosion, with covering don’t
toxic on approval of corrosion, resistant to changes
of temperature
P
6.10
6.11
6.12
6.13
6.14
6.15
Result - Remark
The manufacture of an appliance must be realize in
such a way that during its used or after, in normal
conditions of use , don’t show : a) displacement of
parts and pieces, b) deformations and c)
deteriorations obstruct its operation
The components can not be
All components and parts installed or adjusted in
factory which shall not be manipulated by the users opened by the users without
use of tool.
or installer, must not protected
The appliances must have a device for collect all
water in the moment of defrost, can be internal
removable or external in that defrost water
evaporates and a drainage system design as that
assure its appropriate function
The hinges and handle must be hard and resistant
at corrosion, the subjection system must be able of
keep its specific function, must permit at the door
to be open or close easily
The grid, container and similar components must
be a mechanical resistance appropriate. Those that
are considered for removable, subjection must be
able of keep its complete move when these are
charges.
Instructions Manual: All appliance must be
commercialized with an instruction manual of use
and maintenance for user, these instructions must
be write in Spanish and in compressible terms,
must be contain
Verdict
P
P
P
P
P
P
Page 6 of 10
Report No. XB-11-0561
ISO 15502:2005
Clause
Requirement + Test
7
LABEL
7.1
Label and package shall be written in Spanish
clearly
7.2
The following information shall be included in the
label
7.2.1
Name of manufacturer
7.2.2
Legend that indicate its origin country
7.2.3
Number of serial and/or manufactured date
P
7.2.4
Gross volume in decimeters cubic or in liters
P
7.2.5
Climate type (ST,T)
P
7.2.6
Refrigerant designation and mass in g
7.2.7
All information about source energy, voltage,
potency, frequency
Result - Remark
Verdict
P
P
P
MADE IN U.S.A.
P
P
115 Vac, 60 Hz,0.98 A
P
7.2.8
Freezing capacity in kg, if applicable
P
7.2.9
Energy consumption, in kw-h/year
P
7.3
Packing
P
7.3.1
Model No.
P
7.3.2
The serial number and/or date of manufacture,
which can be codified
P
7.3.3
Symbol or class ST or T
ST
P
7.3.4
Voltage and frequency
Specific requirements
115 Vac, 60 Hz
P
6.1
-
Materials, design and manufacturing
General Information
-
Adequate performance y durability in its usage
P
P
6.1.1.2
Item defines several characteristics are addressed
to the attention of the manufacturer.
Refrigerating system, materials and finishes.
6.1.1.3
Thermal Isolated and air tightness
P
6.1.1.4
3) Doors, covers and accessories
P
6.1.1.5
Grid and containers
P
6.1.1.6
disposition of the defrosted water
P
6.1.1.7
Refrigerating system
P
6.1. 2.
Product Requirements
-
6.1.2.1
Volume and area
6.1.1
6.1.1.1
-
P
P
Page 7 of 10
Report No. XB-11-0561
ISO 15502:2005
Clause
Requirement + Test
6.1.2.2
Performance Characteristics
-
-
Storage temperature
P
-
Freezer able
P
-
Able for ice manufacture
N/A
-
Energy consumption
P
Time arise of temperature
P
-
Result - Remark
Verdict
-
8
Test Methods
8.1.1
Dimensions(mm)
495×577×1441
P
8.1.2.1
Gross Volume
Measured value: 480L
P
8.1.2.2
Total storage volume
Measured value: 480L
P
8.1.3
Determine Storage grid areas
dm
8.3
Tests of tightness of door or cover seal
Ambient temperature:
32ć˗
A strip of paper 50 mm and
0,08 mm thickness and of
suitable length used
P
8.4
Test of the opening force of the door or cover
Ambient temperature:
32ć˗
The door was opened from
inside before the force of 70 N
P
Test of the durability of the hinges and handles
doors and covers
Ambient temperature:
32ć ;
The doors of fresh-food and
frozen food compartment can
withstand the relevant opening
and closing operations
8.6
Test of mechanical strength of the grids or similar
components
Ambient temperature:
32ć ;
The shelves can withstand the
loading test accordingly for 1
h
P
8.7
Test of storage temperature
(see appended table)
P
8.8
Water vapour condensation test
Ambient temperature:
32ć ;
No fog and droplet on external
surface
P
8.9
Energy consumption test
(see appended table)
P
8.10
Temperature rise test, if applicable
N/A
8.11
Freezing test, if applicable
N/A
8.13
Test of the absence of smell and taste
8.5
2
Ambient temperature:
32 ć ;
Mark 1: slight foreign odour
P
P
P
Page 8 of 10
Test data table:
Report No. XB-11-0561
Table for dimensions and volumes
P
Gross volume details:
Item
Measured gross
volume (L)
Total gross volume
495
Rated gross
volume(L)
Required deviation
>=-3%
495
Storage volume details:
Item
Deviation
P
Deviation
Measured storage
volume (L)
Fresh food
Freezer
Total storage volume
480
Rated storage
volume (L)
Required deviation
480
>=-3%
>=-3%
>=-3%
Storage temperature test
Ambient temperature
38ć
Control setting
Temperature of freshfood compartment
Tm =3.82 ć; 0<t1, t2, t3<10ć ; Tm,max= 4,0ć
Temperature of frozenfood compartment
t1 =–21.39 ć ; t2= –25.52 ; t3 =-20.07 ć ; t4= -26.09 ć Tmax=-18ć
Ambient temperature
16ć
Temperature of freshfood compartment
Tm =2.15 ć; 0<t1, t2, t3<10ć ; Tm,max= 4,0ć
Temperature of frozenfood r compartment
Control setting
7/7
5.9/7
t1 =–20.71 ć ; t2= –22.35 ; t3 = -19.79 ć ; t4= -22.53 ć Tmax=-18ć
Page 9 of 10
Energy consumption test
Ambient temperature
Test voltage
25ć
115 V, 60 Hz
Relative humidity
Energy efficiency
A
Compartment temperature
(fresh-food compartment)
Tm =4.48 ć;
0<t1, t2, t3<10ć ; Tm,max= 5,0ć
Compartment temperature
(frozen-food compartment)
t1 =–20.97 ć ; t2=–19.75 ;
t3 = -23.14 ć; t4= -23.78 ć
Tmax=-18ć
Control setting
6.0
Report No. XB-11-0561
Page 10 of 10
Photos:
Product general front view
Product general back view
Product general front view with door open
(End of report)
Report No.
Download