Global standards used locally worldwide
List of ISO TC67 standards and their status with API, CEN
and various regional and national standards developing
organizations
January 2020
1
Table of Contents
Publications ........................................................................................................................................... 3
Presentation of the list ........................................................................................................................... 5
Global List of standards…………………………………………………………………………..……...…….8
Disclaimer
Whilst every effort has been made to ensure the accuracy of the information contained in this
publication, neither ISO, ISO/TC 67 nor any of its members past present or future warrants its
accuracy or will, regardless of its or their negligence, assume liability for any foreseeable or
unforeseeable use made thereof, which liability is hereby excluded. Consequently, such use is at the
recipient’s own risk on the basis that any use by the recipient constitutes agreement to the terms of
this disclaimer. The recipient is obliged to inform any subsequent recipient of such terms. The
document is made available for information purposes only.
2
Publications
Global experience
The Oil & Gas Industry has access to a wealth of technical knowledge and experience with its
members operating around the world in many different terrains. This valuable knowledge for the
industry is collated and distilled to use as Global standards used locally worldwide. The foremost aim
of international standardization is to facilitate the exchange of goods and services through the
elimination of technical barriers to trade.
The ISO Technical Committee 67 - "Materials, equipment and offshore structures for the petroleum,
petrochemical and natural gas industries" – (ISO/TC 67) has the responsibility of establishing
standards for most capital equipment used in all streams of the Oil & Gas Industry. The ISO/TC 67
standards also provide common health, safety and environmental requirements. This equipment is the
hardware portion used for exploration, production, transportation, and processing of liquid and
gaseous hydrocarbons within the petroleum, petrochemical and natural gas industries, and refining of
crude oil or natural gas products.
The following political, economic, technical, regulatory, legal and social dynamics describe the
business environment of the industry sector, products, materials, disciplines or practices related to the
scope of ISO/TC 67, and they may significantly influence how the relevant standards development
processes are conducted and the content of the resulting standards:
The petroleum, petrochemical and natural gas industries are major industries in most countries'
economies. They are one of the major suppliers of energy for the entire world. The industry is
involved in the Gross National Product as production/supply or in usage, or both.
Petroleum and natural gas provide fuel for heating, lighting, transportation, and mechanization of
most of the world. Petrochemical products provide everything from fabrics, plastic, and tyres, to soft
drink/water bottles, lubricants, fertilizers, and medicines. The constancy of supply is integral to the
functioning of the world economy, and equipment standardized by ISO/TC67 is necessary to
assure that supply.
Consistent high-quality standards
With the international standards developed by ISO/TC 67, the need for regional, national or company
specifications is reduced, manufacturing and inventory costs are minimized, and regulatory authorities
are able to incorporate these standards by reference rather than by restating requirements in
regulations. International Standards are the backbone of our society, ensuring the safety and quality of
products and services, facilitating international trade and improving the environment in which we live
in. Conformity to International Standards helps reassure consumers that products, systems and
organizations are safe, reliable and good for the environment. ISO standards can also remove barriers
to world trade by providing the technical basis on which political trade agreements can be put into
3
practice, whether they are at the regional or international level. The adoption of standards is entirely
voluntary, but companies estimate savings in the millions (U.S. dollars) through having a common set
of agreed standards. Numerous studies have shown that standards boost business and economies.
The oil and gas industry recognises the need to develop consistent standards. Oil and gas operators,
product and service supply organizations in the industry and other interested parties are encouraged
to use the standards as a starting point for their operations or to supplement their own policies and
regulations which can apply locally.
More about the benefits of International Standards can be found on the ISO website.
4
Presentation of the list
The vision of the petroleum, petrochemical and natural gas industries standards effort in ISO/TC 67 is
global standards used locally worldwide. The purpose of this report is to show where we are in this
vision, i.e. which countries have adopted the ISO/TC 67 standards. This report will be periodically
updated to show the progress of the standards development and adoption process. The current
version of the report uses the standards as published on July 2019.1
For up to date information, please consult the public websites of each of the standards development
organisations mentioned herein. The list will be available via the official ISO/TC 67 website, and the
ISO/TC 67 website under TC 67 management. This report focuses on the ISO/TC 67 standards only.
There are many other standards available for use by the Oil & Gas industry, developed by ISO or
other standards developing organizations like API, CEN, GOST and GSO. References are made to
the public websites of these organisations.
ISO title and ISO column
The basis of this report is the complete list of published ISO/TC 67 standards, including joint working
groups. These standards are developed together with:

ISO/TC 60/SC2 “Gear capacity calculation”,

ISO/TC 115/SC3 “Installation and special application of pumps”,

ISO/TC 118/SC 1 “Process compressors”,

ISO/TC 153 “Valves",

ISO/TC 192 “Gas turbines”.
The list also shows the current edition and whether there are technical and/or amendments issued
with the International Standard.
ISO and API
In certain situations, the ISO international standard can be published as a supplement to an API
standard (via normative reference) which includes technical content
1
The input for the list has been received at various moments in 2019. Please see the top row of the list for date specification by
standardization organization.
5
ABNT – Brazil column
This column shows which standards are adopted and published by ABNT as NBR, national Brazilian
standard.
API – USA column
This column shows the API standards which have already been re-adopted from the ISO standards.
Some state "MOD"; this indicates that there have been some technical changes from the ISO
document, whilst those marked “IDT” are identical adoptions. Also note that all national adoptions are,
by definition, American National Standards (ANSI). Some of the indicated documents in the API
column are issued by another standards developing organization (e.g. NACE).
CSA - Canada column
This column shows which standards are adopted and published by CSA as national Canadian
standard. If CSA has not adopted the remaining ISO standards in the list into Canada’s national
standards system, that does not necessarily mean that they are not in use.
CEN – Europe column
It is important to note that the EN standards are also published as national standards in all the 33
European member states of CEN, preferably within six months of the publication as EN.
The standards listed are technically identical to the corresponding ISO ones (these standards are
numbered EN ISO XXXXX); they were accepted in Europe either through the parallel vote procedure
or by Unique Acceptance Procedure within the Vienna Agreement between CEN and ISO (ISO lead).
All documents are part of the work programme of CEN/TC 12 “Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries”, except some which belong to
CEN/TC 69 “Industrial valves”, CEN/TC 282 “Installation and equipment for LNG” or ECISS/TC 110
“Steel tubes, and iron and steel fittings. Some of them (developed by ISO/TC 67/SC2) have a different
number in CEN because, if the technical content is identical, their scope in Europe excludes the gas
infrastructure industries; they nevertheless have in their title the reference to the ISO initial standards
with the indication: (modified).
Note that in the EN document the main body of the standard is identical to the ISO one, with a cover
page added to the ISO standard.
GB – China column:
The Chinese number of the ISO adopted standard is different from the ISO one. China adopts ISO
standards in different ways: Identical (IDT), Modified (MOD) and a small number as Not equivalent
(NEQ).
GOST R – Russian Federation column:
This column shows which standards are adopted and published by GOST R as Russian standards.
6
ST RK – Kazakhstan column:
Kazakhstan adopts the ISO standards in three different ways: Identical (IDT), Modified (MOD) and a
small number as Not equivalent (NEQ).
GSO – Gulf States column
This column concerns an additional regional group of countries that are adopting (identical or modified) ISO/TC67 standards. GSO is the Gulf Standardization Organization for the Cooperation Council
for the Arab States of the Gulf. GSO currently includes six countries: Bahrain, Kuwait, Oman, Qatar,
Saudi Arabia, and the United Arab Emirates.
Once a standard is adopted by GSO, it is automatically adopted by the member countries of the Gulf
Standards Organization, similar to the CEN process.
7
ISO/TC 67 overview
8
ISO
Edition
ISO 15590-1:2018
ed. 3
ISO 15590-2:2003
ed. 1
ISO 15590-3:2004
ed. 1
Amd
Cor
work in
progress
Revision of
Petroleum and natural gas industries -- Induction bends, fittings and
flanges for pipeline transportation systems -- Part 2: Fittings
Petroleum and natural gas industries -- Induction bends, fittings and
flanges for pipeline transportation systems -- Part 3: Flanges
Petroleum and natural gas industries -- Cathodic protection of
pipeline transportation systems -- Part 1: On-land pipelines
Petroleum, petrochemical and natural gas industries -- Cathodic
protection of pipeline transportation systems -- Part 2: Offshore
pipelines
Petroleum and natural gas industries -- Pipeline transportation
systems -- Reliability-based limit state methods
ISO 15589-1:2015
ed. 2
ISO 15589-1:2003
ISO 15589-2:2012
ed. 2
ISO 15589-2:2004
ISO 16708:2006
ed. 1
ISO 13623:2017
ed. 3
ISO 13623:2000; ISO 13623:2009
ISO 21809-1:2018
ed. 2
ISO 21809-2:2014
ed. 2
ISO 21809-3:2016
ed. 2
ISO 21809-4:2009
ed. 1
ISO 21809-5:2017
ed. 2
ISO 21329:2004
ed. 1
ISO 3183:2012
ed. 3
ISO/TS 12747:2011
ed. 1
ISO 12490:2011
ed. 1
ISO 12736:2014
ed. 1
ISO 14313:2007
ed. 2
ISO 16440:2016
ed. 1
ISO 13847:2013
ed. 2
ed. 2
Cor 1:2009
ISO 10414-2:2011
ed. 2
ISO 10416:2008
ed. 2
ISO 13500:2008
ed. 3
Amd
1:2010
ISO 13500:2008
ed. 3
Amd
1:2010
ISO 13501:2011
ed. 2
ISO 10426-1:2009
ed. 3
ISO 10426-2:2003
ed. 1
ISO 10426-3:2003
ed.1
Amd
1:2012
Cor 1:2013
Cor 1:2009
Cor 1:2009
Amd
1:2005
SC 2
WG 10
ABNT NBR ISO 15589-1 : 2016
ABNT NBR ISO 15589-2 : 2015
TC 67
SC 2
WG 12
Petroleum and natural gas industries -- Pipeline transportation
systems
TC 67
SC 2
WG 13
ISO 21809-1:2011
Petroleum and natural gas industries -- External coatings for buried
or submerged pipelines used in pipeline transportation systems -Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
TC 67
SC 2
ISO 21809-2:2007
Petroleum and natural gas industries -- External coatings for buried
or submerged pipelines used in pipeline transportation systems -Part 2: Single layer fusion-bonded epoxy coatings
TC 67
SC 2
Petroleum and natural gas industries -- External coatings for buried
or submerged pipelines used in pipeline transportation systems -Part 3: Field joint coatings
Petroleum and natural gas industries -- External coatings for buried
or submerged pipelines used in pipeline transportation systems -Part 4: Polyethylene coatings (2-layer PE)
Petroleum and natural gas industries -- External coatings for buried
or submerged pipelines used in pipeline transportation systems -Part 5: External concrete coatings
Petroleum and natural gas industries -- Pipeline transportation
systems -- Test procedures for mechanical connectors
ISO 3183:2007
rev
Petroleum and natural gas industries -- Steel pipe for pipeline
transportation systems
Petroleum and natural gas industries -- Wet thermal insulation
coatings for pipelines, flow lines, equipment and subsea structures
Petroleum and natural gas industries -- Pipeline transportation
systems -- Pipeline valves
Petroleum and natural gas industries -- Pipeline transportation
systems -- Design, construction and maintenance of steel cased
pipelines
ISO 14313:1999
ISO 13847:2000
Petroleum and natural gas industries -- Pipeline transportation
systems -- Welding of pipelines
ST RK ‐ Kazakhstan
(updated in Q2 2019)
EN 14870-1:2011 [ISO
15590-1:2009 modified]
ST RK ISO 15590-2:2007
(ISO 15590-2:2003, IDT)
ST RK ISO 15590-3:2007
(ISO 15590-3:2004, IDT)
ST RK ISO 15589-1:2010
(ISO 15589-1:2003, IDT)
EN 14870-2:2004 [ISO
15590-2:2003 modified]
EN 14870-3:2004 [ISO
15590-3:2004 modified)
ST RK ISO 15589-2:2007
(ISO 15589-2:2004, IDT)
GSO ISO 15590-2:2008
GB/T 21448-2017 (ISO 155891:2015, NEQ)
GB/T 20659-2017 (ISO 15546:2011,
MOD )
GSO ISO 15590-3:2008
GSO ISO 15589-1:2008
GSO ISO 15589-2:2008
EN ISO 16708:2006
GSO ISO 16708:2008
GSO ISO 13623:2010
WG 14
ST RK ISO 21809-2:2010
(National Adoption under
EN ISO 21809-2:2014
(ISO 21809-2:2007, IDT)
committee
[under ECISS/TC 110]
GOST R ISO 21809-2-2013 consideration)
GOST R ISO 21809-2-2015 (ISO
21809-2:2007, IDT), TC 357
GSO ISO 21809-2:2008
TC 67
SC 2
WG 14
ST RK ISO 21809-3:2010
(ISO 21809-3:2008, IDT)
[scope of ECISS/TC 110]
GSO ISO 21809-3:2010
TC 67
SC 2
WG 14
ST RK ISO 21809-4:2010
(ISO 21809-4:2009, IDT)
[scope of ECISS/TC 110]
GSO ISO 21809-4:2011
TC 67
SC 2
WG 14
ST RK ISO 21809-5:2012
(ISO 21809-5:2010, IDT)
EN ISO 21809-5:2010
[under ECISS/TC 110)]
GSO ISO 21809-5:2010
TC 67
SC 2
WG 15
TC 67
SC 2
WG 16
TC 67
SC 2
WG 17
TC 67
SC 2
WG 18
TC 67
SC 2
WG 19
TC 67
SC 2
WG 2
TC 67
SC 2
WG 20
TC 67
SC 2
ST RK ISO 21329:2007
(ISO 21329:2004, IDT)
ST RK ISO 3183:2011 (ISO
3183:2007, IDT);
API 5L, 46th ed:2018
GOST ISO 3183-2015
ST RK ISO/ТS 12747-2012
(ISO/TS 12747:2011, IDT)
API Std 6DX 1st
GOST ISO 12490-2016
ed:2012
ST RK ISO 14313:2012
(ISO 14313:2007, IDT)
WG 8
ST RK ISO 13847:2012
(ISO 13847:2000, IDT)
ST RK ISO 14723:2006
(ISO 14723:2001, IDT)
WG 9
WG 1
GOST 33213-2014 (ISO
10414-1:2008)
ISO 10414-2:2002
Petroleum and natural gas industries -- Field testing of drilling fluids -TC 67
Part 2: Oil-based fluids
SC 3
WG 1
ISO 10416:2002
Petroleum and natural gas industries -- Drilling fluids -- Laboratory
testing
TC 67
SC 3
WG 1
GOST 33697-2015 (ISO
10414-2:2011)
ST RK ISO 10416-2012
(ISO 10416:2008 IDT)
GOST 33696-2015 (ISO
10416:2008)
ISO 13500:1998; ISO 13500:2006
Petroleum and natural gas industries -- Drilling fluid materials -Specifications and tests
TC 67
SC 3
WG 1
ISO 13500:1998; ISO 13500:2006
Petroleum and natural gas industries -- Drilling fluid materials -Specifications and tests
TC 67
SC 3
WG 1
TC 67
SC 3
WG 1
TC 67
SC 3
WG 2
TC 67
SC 3
WG 2
TC 67
SC 3
WG 2
TC 67
SC 3
WG 2
TC 67
SC 3
WG 2
EN ISO 21329:2004
EN ISO 3183:2012 [under
ECISS/TC 110]
CEN ISO/TS 12747:2013
prEN ISO 12490 [status:
abandoned]
GSO ISO 21329:2008
GB/T 37262-2018 (ISO 27627:2014, Adopted previous ISO 3183 revision
IDT)
in 3 parts -1, -2, -3, IDT
GB/T 30217.2-2016 (ISO/TR 136242:2009, IDT )
GB/T 33294-2016 (ISO 104263:2003, MOD)
API RP 17U 1st
ed:2015
EN ISO 12736:2014
GB/T 5005-2010 (ISO 13500:2008,
MOD)
API Spec 6D, 24th
ed.:2014 (MOD)
EN 13942:2009 + AC:2009
[ISO 14313:2007 modified]
GB/T 24257-2009 (ISO
13879:1999, MOD)
API Std 1104 21st
ed:2013
[latest edition not adopted |
EN 14163:2001 + AC:2006
(ISO 13847:2000 modified)]
GSO ISO 3183:2014
GSO ISO 12747:2012
GSO ISO 12490:2014
GSO ISO 12736:2015
GOST R 55020-2012 (ISO
14313:2007, NEQ), TC 259
GSO ISO 14313:2008
GB/T 19829.2-2005 (ISO 156632:2001, IDT )
SC 2
rev
GSO ISO 15590-1:2010
GSO ISO 21809-1:2012
SC 3
ed. 1
GSO ‐ Gulf
(updated in Q3 2019)
EN ISO 21809-1:2011
[under ECISS/TC 110]
TC 67
rev
GOST R ‐ Russia
(updated in Q3 2019)
WG 14
Petroleum and natural gas industries -- Field testing of drilling fluids -TC 67
Part 1: Water-based fluids
Cor 1:2006
GB/T ‐ China
(updated in Q1 2019)
EN 14161:2011 + A1:2015
[ISO 13623:2009 modified]
ISO 14723:2001
ISO 10426-1:2000; ISO 10426-1:2005
[scope of CEN/TC 219]
CSA ‐ Canada
(updated in Q3 2019)
NACE SP0115EN ISO 15589-2:2014
2015/ISO 15589-2:2012 [under CEN/TC 219]
ST RK ISO 16708:2008
(ISO 16708:2006, IDT)
ST RK ISO 13623:2010
(ISO 13623:2009, IDT);
ST RK 1916-2009
ISO 10414-1:2001
Petroleum and natural gas industries -- Drilling fluids -- Processing
equipment evaluation
Petroleum and natural gas industries -- Cements and materials for
well cementing -- Part 1: Specification
Petroleum and natural gas industries -- Cements and materials for
well cementing -- Part 2: Testing of well cements
Petroleum and natural gas industries -- Cements and materials for
well cementing -- Part 3: Testing of deepwater well cement
formulations
Petroleum and natural gas industries -- Cements and materials for
well cementing -- Part 3: Testing of deepwater well cement
formulations
Petroleum and natural gas industries -- Cements and materials for
well cementing -- Part 4: Preparation and testing of foamed cement
slurries at atmospheric pressure
API ‐ USA
CEN ‐ Europe
(updated in Q3 2019) (updated in Q1 2019)
ST RK ISO 15590-1:2011
(ISO 15590-1:2009, IDT)
Petroleum and natural gas industries -- Pipeline transportation
systems -- Subsea pipeline valves
ISO 10426-3:2003
ISO 10426-4:2004
TC 67
WG 11
ISO 13501:2005
Cor 1:2010;
Cor 2:2012
WG 10
WG 11
rev
ISO 14723:2009
WG 10
SC 2
ABNT ‐ Brazil
(update in Q2 2019)
SC 2
Petroleum and natural gas industries -- Pipeline transportation
systems -- Recommended practice for pipeline life extension
Petroleum and natural gas industries -- Mechanical integrity and
sizing of actuators and mounting kits for pipeline valves
ISO 10414-1:2008
SC 2
TC 67
Liason TC 67
SC 2
ISO 3183:1980;
ed. 2
WG
TC 67
ISO 21809-5:2010
Cor 1: 2009
SC
TC 67
ISO 21809-3:2008
Amd 1:
2017
TC
Petroleum and natural gas industries -- Induction bends, fittings and
TC 67
flanges for pipeline transportation systems -- Part 1: Induction bends
ISO 15590-1:2001; ISO 15590-1:2009
Amd
1:2011
Document title
API Spec 6DSS 3rd
ed:2017
GSO ISO 13847:2008
EN ISO 14723:2009
GB/T 29165.2-2012 (ISO 146922:2002, IDT)
API RP 13B-1 5th
ed:2019 (MOD)
EN ISO 10414-1:2008
GB/T 16783.1-2014 (ISO 104141:2008, IDT)
API RP 13B– 2 5th ed.
2014 (MOD)
EN ISO 10414-2:2011
GB/T 16783.2-2012 (ISO 104142:2002, MOD)
GSO ISO 10414-2:2012
API RP 13I 8th ed. /
ISO 10416:2009 (IDT)
EN ISO 10416:2009
GB/T 29170-2012 (ISO 10416:2008,
MOD)
GSO ISO 1O416 : 2009
In planning ISO 13500 : 2008
ST RK ISO 13500:2012
(ISO 13500:2008, IDT);
API Spec 13A 18th
edition
EN ISO 13500:2008 (2nd
edition) (COR 1:2009)
ISO 13500:2008 MOD
In planning ISO 13500 : 2008
ST RK ISO 13500:2012
(ISO 13500:2008, IDT);
API Spec 13A 18th
edition
EN ISO 13500:2008 (2nd
edition) (COR 1:2009)
ISO 13500:2008 MOD
ST RK ISO 13501:2011
ST RK ISO 10426-1:2011
(ISO 10426-1:2009, IDT)
ST RK ISO 10426-2:2012
(ISO 10426-2:2003, IDT)
ST RK ISO 10426-3-2011
(ISO 10426-3:2003 IDT)
API RP 13C 5th
edition:2014 (MOD)
API Spec 10A 25th
ed:2019
API RP 10B-2nd
ed.:2013 (MOD)
EN ISO 13501:2011
API RP 10B-3 2nd
ed:2016
GSO ISO 13500:2008 (to
be updated to include
Cor1)
GSO ISO 13500:2008 (to
be updated to include
Cor1)
GSO ISO 13501:2015
EN ISO 10426-1:2009
EN ISO 10426-2:2003 +
AC:2007
GSO ISO 14723:2010
GSO ISO 10414-1:2009
GSO ISO 10426-1:2012
GB/T 19139-2012 (ISO 104262:2003, MOD )
GSO ISO 10426-2:2013
GB/T 33294-2016 (ISO 104263:2003, MOD)
GSO ISO 10426-3:2013
API RP 10B-3 1st ed. /
EN ISO 10426-3:2004
ISO 10426-3:2003 (IDT)
In planning ISO 10426-3 : 2003
ST RK ISO 10426-4:2011
(ISO 10426-4:2004, IDT)
API RP 10B-4 2nd ed.
:2015 (MOD)
EN ISO 10426-4:2004
GB/T 33294-2016 (ISO 104263:2003, MOD)
GSO ISO 10426-4:2013
EN ISO 10426-6:2008
GB/T 33293-2016 (ISO 104265:2004, MOD)
GSO ISO 10426-6:2015
ISO 10426-6:2008
ed. 1
Petroleum and natural gas industries -- Cements and materials for
well cementing -- Part 6: Methods for determining the static gel
strength of cement formulations
TC 67
SC 3
WG 2
ST RK ISO 10426-6:2011
(ISO 10426-6:2008, IDT)
API RP 10B-6 1st ed.
Pending Publication
ISO 10426-6:2008
(MOD)
ISO 10427-1:2001
ed. 1
Petroleum and natural gas industries -- Equipment for well cementing
TC 67
-- Part 1: Casing bow-spring centralizers
SC 3
WG 2
ST RK ISO 10427-1:2004
(ISO 10427-1:2001, IDT)
API Spec 10D 6th ed.
EN ISO 10427-1:2001
ISO 10427-1:2001 (IDT)
ISO 10427-2:2004
ed. 1
Petroleum and natural gas industries -- Equipment for well cementing
TC 67
-- Part 2: Centralizer placement and stop-collar testing
SC 3
WG 2
ST RK ISO 10427-2:2011
(ISO 10427-2:2004, IDT)
API RP 10D-2 1st ed. /
EN ISO 10427-2:2004
ISO 10427-2:2004 (IDT)
GB/T 19831.1-2005 (ISO 104271:2001, IDT )
GSO ISO 10427-2:2009
ISO 10427-3:2003
ed. 1
Petroleum and natural gas industries -- Equipment for well cementing
TC 67
-- Part 3: Performance testing of cementing float equipment
SC 3
WG 2
ST RK ISO 10427-3:2004
(ISO 10427-3:2003, IDT)
API RP 10F 4th ed:2018 EN ISO 10427-3:2004
GB/T 19831.2-2008 (ISO 104272:2004, IDT)
GSO ISO 10427-3:2009
SC 3
WG 2
ST RK ISO 10426-3:2011
(ISO 10426-3:2003, IDT)
API RP 10B-3 1st ed. /
EN ISO 10426-3:2004
ISO 10426-3:2003 (IDT)
ISO 18165:2001
ISO 10426-3:2003
ISO 10426-5:2004
ed. 1
ISO 13503-1:2011
ed. 2
ISO 13503-2:2006
ed. 1
ISO 13503-3:2005
ed. 1
ISO 13503-1:2003
Amd
1:2009
Cor 1: 2006
Petroleum and natural gas industries -- Cements and materials for
well cementing -- Part 3: Testing of deepwater well cement
formulations
Petroleum and natural gas industries -- Cements and materials for
well cementing -- Part 5: Determination of shrinkage and expansion
of well cement formulations at atmospheric pressure
Petroleum and natural gas industries -- Completion fluids and
materials -- Part 1: Measurement of viscous properties of completion
fluids
Petroleum and natural gas industries -- Completion fluids and
materials -- Part 2: Measurement of properties of proppants used in
hydraulic fracturing and gravel-packing operations
Petroleum and natural gas industries -- Completion fluids and
materials -- Part 3: Testing of heavy brines
TC 67
In planning ISO 10426-3 : 2003
GSO ISO 10427-1:2009
TC 67
SC 3
WG 3
ST RK ISO 10426-5:2011
(ISO 10426-5:2004, IDT)
API RP 10B-5 1st ed. /
EN ISO 10426-5:2005
ISO 10426-5:2004 (IDT)
GSO ISO 10426-5:2013
TC 67
SC 3
WG 3
ST RK ISO 13503-1:2009
ISO (13503-1-2003 IDT)
API RP 13M 1st edition /
EN ISO 13503-1:2011
ISO 13503-1:2003 (IDT)
GSO ISO 13503-1:2014
TC 67
SC 3
WG 3
ST RK ISO 13503-2:2009
(ISO 13503-2:2006 IDT)
API RP 19C 2nd
ed:2018
EN ISO 13503-2:2006 +
A1:2009
GSO ISO 13503-2:2008
(to include Amend 1)
TC 67
SC 3
WG 3
ST RK ISO 13503-3:2009
(ISO 13503-3 IDT)
API RP 13J 5th
edition:2014 (MOD)
EN ISO 13503-3:2005 +
AC:2007
GSO ISO 13503-3:2014
ABNT NBR ISO 13503-2 : 2011
9
ISO
Edition
ISO 13503-4:2006
ed. 1
ISO 13503-5:2006
ed. 1
ISO 13503-6:2014
ed. 1
ISO 10407:1993
ed. 1
ISO 10407-2:2008
ed. 1
ISO 10424-1:2004
Amd
Cor
work in
progress
Revision of
Document title
Petroleum and natural gas industries -- Completion fluids and
materials -- Part 4: Procedure for measuring stimulation and gravelpack fluid leakoff under static conditions
Petroleum and natural gas industries -- Completion fluids and
materials -- Part 5: Procedures for measuring the long-term
conductivity of proppants
Petroleum and natural gas industries -- Completion fluids and
materials -- Part 6: Procedure for measuring leakoff of completion
fluids under dynamic conditions
Cor 1:2009
ISO 10407:1993
SC
WG
Liason TC 67
ABNT ‐ Brazil
(update in Q2 2019)
ST RK ‐ Kazakhstan
(updated in Q2 2019)
API ‐ USA
CEN ‐ Europe
(updated in Q3 2019) (updated in Q1 2019)
API RP 13M-4 1st ed./
EN ISO 13503-4:2006
ISO 13503-4:2006 (IDT)
API RP 19D 1st edition /
EN ISO 13503-5:2006
ISO 13503-5:2006 (IDT)
TC 67
SC 3
WG 3
ST RK ISO 13503-4:2009
(ISO 13503-4:2006, IDT)
TC 67
SC 3
WG 3
ST RK ISO 13503-5:2009
(ISO 13503-5:2006, IDT)
TC 67
SC 3
WG 3
ST RK ISO 13503-6-2017
Petroleum and natural gas industries -- Drilling and production
equipment -- Drill stem design and operating limits
TC 67
SC 4
WG 1
Petroleum and natural gas industries -- Rotary drilling equipment -Part 2: Inspection and classification of used drill stem elements
TC 67
SC 4
WG 1
Petroleum and natural gas industries -- Rotary drilling equipment -Part 1: Rotary drill stem elements
ed. 1
TC
TC 67
SC 4
WG 1
ST RK ISO 10407:2004
(ISO 10407:1993 IDT)
ST RK ISO 10407-2-2012
(ISO 10407-2:2008 IDT)
GOST 33006.2-2014 (ISO
10407-2:2008 MOD)
ST RK ISO 10424-1: 2006
(ISO 10424-1: 2004 IDT)
EN ISO 13503-6:2014
CSA ‐ Canada
(updated in Q3 2019)
GB/T ‐ China
(updated in Q1 2019)
GSO ISO 13503-4:2008
SY/T 5108-2014 (ISO 135032:2006, MOD)
GB/T 29169-2012 (ISO 104072:2008, MOD)
API RP 7G-2 1st ed.
(IDT) + errata 2009
GB/T 29169-2012 (ISO 104072:2008, MOD)
API Spec 7-1 1st ed. /
ISO 10424EN ISO 10424-1:2004
1:2004(MOD) +addenda
GSO ‐ Gulf
(updated in Q3 2019)
GSO ISO 13503-5:2008
API RP 7G : 16th
ed1998 (MOD) +erratum
[not adopted]
2000 + add. 2003 +add.
2009
EN ISO 10407-2:2008 +
AC:2009
GOST R ‐ Russia
(updated in Q3 2019)
GB/T 33581-2017 (ISO 13501:2011,
NEQ)
GSO ISO 10407:2010
GOST 33006.2-2014 (ISO 104072:2008, MOD),TC 023
GB/T 22512.1-2012 (ISO 104241:2004, MOD )
GSO ISO 10407-2 : 2010
GSO ISO 10424-1:2009
2007, 2009, 2011, 2019
ST RK ISO 10424-2-2015
(ISO 10424-2:2007 IDT)
ГОСТ 34438.2-2018 (ISO
10424-2:2007 MOD)
GOST R 56349-2015 (ISO
10424-2:2007 MOD)
ST RK ISO 13534:2004
(ISO 13534:2000, IDT)
GOST R ISO 13534-2013
ST RK 1263-2004 (ISO
13535:2000, NEQ);
ST RK ISO 13535:2010
(ISO 13535:2000, IDT)
GOST 31844-2012 (ISO
13535:2000)
ST RK ISO 13626:2006
(ISO 13626:2003, IDT)
GOST R ISO 13626-2013
ST RK ISO 14693:2006
(ISO 14693:2003, IDT)
GOST 31841-2012 (ISO
14693:2003)
ISO 10424-2:2007
ed. 1
Petroleum and natural gas industries -- Rotary drilling equipment -Part 2: Threading and gauging of rotary shouldered thread
connections
TC 67
SC 4
WG 1
ISO 13534:2000
ed. 1
Petroleum and natural gas industries -- Drilling and production
equipment -- Inspection, maintenance, repair and remanufacture of
hoisting equipment
TC 67
SC 4
WG 1
ISO 13535:2000
ed. 1
Petroleum and natural gas industries -- Drilling and production
equipment -- Hoisting equipment
TC 67
SC 4
WG 1
ISO 13626:2003
ed. 1
Petroleum and natural gas industries -- Drilling and production
equipment -- Drilling and well-servicing structures
TC 67
SC 4
WG 1
ISO 14693:2003
ed. 1
Petroleum and natural gas industries -- Drilling and well-servicing
equipment
TC 67
SC 4
WG 1
Petroleum and natural gas industries -- Drilling and production
equipment -- Shallow gas diverter equipment
TC 67
SC 4
WG 2
ST RK ISO 13354:2017
API Std 64 3rd ed:2017 EN ISO 13354:2014
Petroleum and natural gas industries -- Drilling and production
equipment -- Drill-through equipment
TC 67
SC 4
WG 2
ST RK ISO 13533:2004
(ISO 13533:2001, IDT)
GOST R ISO 13533-2013
API Spec16A 4th
ed:2017
API RP 16Q 2nd
ed:2017
EN ISO 13624-1:2009
Withdrawn
EN ISO 13625:2002
ISO 13354:2014
ed. 1
ISO 13533:2001
ed. 1
rev
Cor 1:2005
ISO 13624-1:2009
ed. 1
Petroleum and natural gas industries -- Drilling and production
equipment -- Part 1: Design and operation of marine drilling riser
equipment
ISO 13625:2002
ed. 1
Petroleum and natural gas industries -- Drilling and production
equipment -- Marine drilling riser couplings
TC 67
SC 4
WG 2
ed. 1
Petroleum and natural gas industries -- Drilling and production
equipment -- Part 2: Deepwater drilling riser methodologies,
operations, and integrity technical report
TC 67
SC 4
WG 2
ISO/TR 13624-2:2009
ISO 10423:2009
ed. 4
ISO 10423:1994;
ISO 10423:2003
ISO 10417:2004
ed. 2
ISO 10417:1993
ISO 10428:1993
ed. 1
ISO 10431:1993
ed. 1
ISO 10432:2004
ed. 3
ISO 10432:1993; ISO 10432:1999
ISO 14310:2008
ed. 2
ISO 14310:2001
ISO 14998:2013
ed. 1
ISO 15136-1:2009
ed. 2
ISO 15136-1:2001
ISO 10423:2001;
WG 3
Petroleum and natural gas industries -- Subsurface safety valve
systems -- Design, installation, operation and redress
TC 67
SC 4
WG 4
Petroleum and natural gas industries -- Sucker rods (pony rods,
polished rods, couplings and sub-couplings) -- Specification
TC 67
SC 4
WG 4
Petroleum and natural gas industries -- Pumping units -- Specification TC 67
SC 4
WG 4
Petroleum and natural gas industries -- Downhole equipment -Subsurface safety valve equipment
TC 67
SC 4
WG 4
Petroleum and natural gas industries -- Downhole equipment -Packers and bridge plugs
TC 67
SC 4
WG 4
Petroleum and natural gas industries -- Downhole equipment -Completion accessories
TC 67
SC 4
Petroleum and natural gas industries -- Progressing cavity pump
systems for artificial lift -- Part 1: Pumps
TC 67
SC 4
ed. 1
ed. 1
Petroleum and natural gas industries -- Drilling and production
equipment -- Part 1: Electric submersible pump systems for artificial
lift
ISO 16070:2005
ed. 2
ISO 16530-1:2017
ed. 1
ISO 17078-1:2004
ed. 1
Amd
1:2010
ISO 17078-2:2007
ed. 1
Amd 1:
2007
ISO 17078-4:2010
ISO 17824:2009
ST RK ISO 13625:2009
(ISO 13625:2002, IDT)
GOST 33005-2014 (ISO
13625:2002)
SC 4
ISO 15136-2:2006
ISO 17078-3:2009
WG 2
TC 67
ISO 15551-1:2015
Cor 1:2009
SC 4
Petroleum and natural gas industries -- Drilling and production
equipment -- Wellhead and christmas tree equipment
Petroleum and natural gas industries -- Progressing cavity pump
systems for artificial lift -- Part 2: Surface-drive systems
ISO 16070:2001
TC 67
ST RK ISO 13624-1:2012
(ISO 13624-1:2009, IDT)
EN ISO 13535:2000
GOST R 53683-2009 (ISO
13535:2000, MOD), TC 23
GSO ISO 13535:2015
API Spec 4F 4th
ed:2013
EN ISO 13626:2004
GOST R ISO 13626 - 2013 (ISO
13626:2003, IDT),TC23
GSO ISO 13626:2015
API Spec 7K 6th ed.
:2015
EN ISO 14693:2003
ST RK ISO 16070:2011
(ISO 16070:2005, IDT)
GOST ISO 16070-2015
Petroleum and natural gas industries -- Well integrity -- Part 1: Life
cycle governance
TC 67
SC 4
WG 4
Petroleum and natural gas industries -- Drilling and production
equipment -- Part 1: Side-pocket mandrels
TC 67
SC 4
WG 4
Petroleum and natural gas industries -- Drilling and production
equipment -- Part 2: Flow-control devices for side-pocket mandrels
TC 67
SC 4
WG 4
WG 4
WG 4
WG 4
GB/T 29165.1-2012 (ISO 146921:2002, IDT)
EN ISO 13533:2001 +
AC:2006
GOST 31841-2012 (ISO 14693:2003,
IDT), TC 023
GOST R ISO 13533-2013 (ISO
13533:2001, IDT), TC23
GB/T 20174-2006 (ISO 13533:2001,
MOD)
ST RK ISO 17078-2:2010
(ISO 17078-2:2007, IDT)
GOST ISO 17078-1-2014
GOST ISO 17078-2-2014
GOST R 33005-2014 (ISO
13625:2002, MOD), TC 023
GSO ISO 13625:2015
GSO ISO/TR 136242:2016
EN ISO 10423:2009
GB/T 22513-2013 (ISO 10423:2009, GOST R 51365-2009 (ISO
MOD)
10423:2003, MOD), TC 023
GSO ISO 10423:2010
API RP 14B 6th
ed.:2015
EN ISO 10417:2004
GB/T 22342-2008 (ISO
10417:2004, IDT)
GSO ISO 10417:2009
No more adopted API
RP 11B 27th ed:2010
prEN ISO 10428 [status:
abandoned]
GB/T 20971-2007 (ISO 104273:2003, IDT )
API RP 11E 19th
ed:2013
prEN ISO 10431 [status:
abandoned]
API Spec 14L 2nd ed. /
ISO 16070:2005 (IDT)
GSO ISO 10428:2015
GOST ISO 10432-2014 (ISO
10432:2004, IDT), TC 023
GOST ISO 14310-2014 (ISO
14310:2008, IDT), TC 023
EN ISO 14310:2008
EN ISO 15136-1:2009
GOST ISO 10417-2014 (ISO
10417;2004, IDT), TC 023
GSO ISO 10431:2011
API Spec 14A 12th ed. :
EN ISO 10432:2004
2015 (MOD)
GSO ISO 14310 : 2009
GB/T 29165.3-2015 (ISO 146923:2002, IDT)
GSO ISO 14998:2015
GB/T 29165.4-2015 (ISO 146924:2002, IDT)
GSO ISO 15136-1:2015
GB/T 17744-2015 (ISO 14693:2003,
MOD)
GSO ISO 15136-2:2015
GSO ISO 15551-1:2016
EN ISO 16070:2005
GB/T 19829.1-2005 (ISO 156631:2000, IDT )
CEN ISO/TS 16530-2:2015
[status: to be published
soon]
GB/T 19829.3-2006 (ISO 156633:2001, IDT)
GOST ISO 16070-2015(IDT)
GSO ISO 16070:2014
API Spec 19G1 1st
edition (MOD)
EN ISO 17078-1:2004 +
A1:2010
GOST ISO 17078-1-2014 (ISO 17078GSO ISO 17078-1:2010
1:2004, IDT), TC023
API Spec 19G2 1st
edition (MOD)
EN ISO 17078-2:2007 +
AC:2009
GOST ISO 17078-2-2014 (ISO 17078GSO ISO 17078-2:2010
2:2007, IDT), TC023
EN ISO 17078-3:2009
GOST ISO 17078-3-2013 (ISO 17078GSO ISO 17078-3:2010
3:2009, IDT), TC023
EN ISO 17078-4:2010
GOST ISO 17078-4-2015 (IDT)
EN ISO 17824:2014
GOST 35504-2013 (ISO 17824:2009,
GSO ISO 17824 : 2010
MOD), TC023
ST RK ISO 17078-3:2010
API Spec 19G3 1st
(ISO 17078-3:2009, IDT)
edition (IDT)
GOST R ISO 17078-3-2013
ST RK ISO 17078-4:2012
(ISO 17078-4:2010, IDT)
GOST ISO 17078-4-2015
ST RK ISO 17824:2011
(ISO 17824:2009, IDT)
GOST 32504-2013 (ISO
17824:2009)
GSO ISO 13533 : 2010
GSO ISO 13624-1:2015
API Spec 6A 21st
ed:2018
EN ISO 15551-1:2015
WG 4
SC 4
API Spec 8C 5th
edition:2012 (MOD)
Withdrawn
SC 4
ed. 1
GSO ISO 13534:2015
API Std 11D3 1st ed./
EN ISO 15136-2:2006
ISO 15136-2:2006 (IDT)
Petroleum and natural gas industries -- Downhole equipment -- Lock
TC 67
mandrels and landing nipples
SC 4
GOST R ISO 13534-2013 (ISO
13534:2000, IDT),TC23
ST RK ISO 15136-1:2012
(ISO 15136-1:2009, IDT)
GOST R 55849-2013 (ИСО
15136-1:2009)
ST RK ISO 15551-1-2017
TC 67
SY/T 5107-2016 (ISO 135034:2006, MOD)
WG 4
WG 4
Petroleum and natural gas industries -- Downhole equipment -- Sand
TC 67
screens
EN ISO 13534:2000
ST RK ISO 14998-2017
WG 4
ed. 1
API RP 8B 8th edition:
2014 (MOD)
WG 4
SC 4
SC 4
GSO ISO 10424-2:2009
Spec 19AC 1st ed:2016
(MOD) / ISO
EN ISO 14998:2013
14998:2013
SC 4
TC 67
GOST R 56349-2014(ISO 104242:2007, MOD), TC 357
API Spec 11D1 3rd
ed.:2015 (IDT)
TC 67
Petroleum and natural gas industries -- Drilling and production
equipment -- Part 4: Practices for side-pocket mandrels and related
equipment
GB/T 22512.2-2008 (ISO 104242:2007, MOD)
GOST ISO 14310-2014
TC 67
ed. 1
EN ISO 10424-2:2007
CEN ISO/TR 13624-2:2013
ST RK ISO 10423:2004
(ISO 10423:2003, IDT);
GOST R 51365-2009 (ISO
10423:2003, MOD)
ST RK ISO 10417:2007
(ISO 10417:2004, IDT)
GOST ISO 10417-2014
(ISO 10417:2004, IDT)
ST RK 1259:2004 (ISO
10428:1993, NEQ);
ST RK ISO 10428:2011
(ISO 10428:1993, IDT);
GOST 13877-96 (ISO
10428:1993, IDT)
ST RK 1260:2004. (ISO
10431:1993, NEQ)
ST RK ISO 10432:2011
(ISO 10432:2004, IDT)
GOST ISO 10432-2014
ST RK ISO 15136-2:2010
(ISO 15136-2:2006, IDT)
Petroleum and natural gas industries -- Drilling and production
equipment -- Part 3: Running tools, pulling tools and kick-over tools
and latches for side-pocket mandrels
API Spec 7-2 2nd
ed:2017
API Spec 19G4 1st
edition (IDT)
API Spec 19SS 1st
ed:2009 / ISO
17824:2009
GSO ISO 17078-4:2012
10
ISO
ISO 28781:2010
ISO 10420:1994
Edition
Amd
Cor
WITHDRA
WN
ISO 13628-1:2005
ed. 2
ed. 1
ISO 13628-11:2007
ed. 1
ISO 13628-15:2011
ed. 1
withdrawn
Amd
1:2010
Cor 1:2008
ed. 2
ed. 1
ISO 13628-4:2010
ed. 2
ISO 13628-5:2009
ed. 2
ISO 13628-5:2002
ISO 13628-6:2006
ed. 2
ISO 13628-6:2000
ed. 1
ISO 13628-8:2002
ed. 1
ISO 13628-9:2000
ed. 1
ISO 18647:2017
ed. 1
ISO 11960:2014
Cor 1:2009
ISO 10420:1994
ISO 13628-2:2006
Cor 1: 2011
ISO 13628-2:2000
TC 67
TC 67
SC
SC 4
SC 4
WG
WG 4
WG 6
GB/T 24259-2009 (ISO
13623:2000, MOD)
GSO ISO 13628-1 : 2010
EN ISO 13628-10:2006
GB/T 30217.1-2013 (ISO 136241:2009, IDT)
GSO ISO 13628-10:2015
TC 67
SC 4
WG 6
API RP 17B 5th
edition:2014 (MOD)
EN ISO 13628-11:2008 +
AC:2009
SY/T 6917-2012 (ISO 13625:2002,
MOD)
GSO ISO 13628-11:2015
TC 67
SC 4
WG 6
RP 17P 1st ed:2013 /
ISO 13628-15:2011
EN ISO 13628-15:2011
EN ISO 13628-2:2006 +
AC:2009
Petroleum and natural gas industries -- Design and operation of
subsea production systems -- Part 2: Unbonded flexible pipe systems TC 67
for subsea and marine applications
SC 4
WG 6
ST RK ISO 13628-2:2009
API Spec 17J 4th ed.
(ISO 13628-2:2006, IDT)
:2014 (MOD)
GOST R ISO 13628-2-2013
Petroleum and natural gas industries -- Design and operation of
TC 67
subsea production systems -- Part 3: Through flowline (TFL) systems
SC 4
WG 6
GOST R ISO 13628-3-2013 Withdrawn
SC 4
WG 6
ST RK ISO 13628-4-2016
SC 4
WG 6
ST RK ISO 13628-5:2009
(ISO 13628-5:2002, IDT)
SC 4
GSO ISO 13628-2:2009
EN ISO 13628-3:2000
GOST R ISO 13628-3-2013 (ISO
13628-3:2000, IDT),TC 023
GSO ISO 13628-3:2009
API Spec 17D 2nd
edition (IDT)
EN ISO 13628-4:2010 +
AC:2011
GOST R ISO 13628-4-2016 (IDT)
GSO ISO 13628-4:2015
(to include Amend 1)
API Spec 17E 5th
ed:2017
EN ISO 13628-5:2009
GB/T 21412.15-2017 ( ISO 1362815:2011, IDT )
WG 6
API STD 17F 4th
ed:2017
EN ISO 13628-6:2006
GB/T 21445.2-2008 (ISO 136282:2000, IDT )
SC 4
WG 6
API RP 17G 2nd ed. /
EN ISO 13628-7:2006
ISO 13628-7:2005 (IDT)
GB/T 21412.3-2009 (ISO 136283:2000, IDT)
SC 4
WG 6
API RP 17H 2nd
ed.:2013 (MOD)
EN ISO 13628-8:2006
GB/T 21412.4-2013 (ISO 136284:2010, IDT )
GSO ISO 13628-8:2009
SC 4
WG 6
Became part of API RP
17H; withdrawel of API EN ISO 13628-9:2006
RP 17M 1st ed.
GB/T 21412.5-2017 (ISO 136285:2009, IDT )
GSO ISO 13628-9:2015
SC 4
WG 8
API RP 5C1 18th
ed:1999
EN ISO 10405:2006
GB/T 17745-2011 (ISO 10405:2000, GOST R 56175-2014 (ISO
IDT)
10405:2000, MOD),TC 357
GSO ISO 10405:2015
API Spec 5CT 10th
ed:2018 (MOD)
EN ISO 11960:2014
API Spec 5DP 1st ed./
ISO 11961:2008 (IDT)
EN ISO 11961:2008 +
AC:2009
WG 1
ISO/TR 10400:2018
ed. 2
ISO 10400:1993; ISO/TR 10400:2007
ISO 13680:2010
ed. 3
ISO 13680:2000; ISO 13680:2008
ed. 3
ISO 13678:2000;
ed. 2
ISO 13702:2015
ed. 2
ISO 15544:2000
ed. 1
Cor 1:2008
TC 67
SC 5
WG 1
Petroleum and natural gas industries -- Field inspection of new
casing, tubing and plain-end drill pipe
TC 67
SC 5
WG 1
ST RK ISO 15463:2006
(ISO 15463:2003, IDT)
API RP 5A5 7th
EN ISO 15463:2003 +
edition/ISO 15463:2003 AC:2009
rev
Petroleum and natural gas industries -- Procedures for testing casing
TC 67
and tubing connections
SC 5
WG 2
ST RK 1262:2004 (ISO
13679:2002, NEQ)
API RP 5C5 4th
ed:2017
rev
Qualification of casing connections for thermal wells
SC 5
WG 2
rev
rev
ISO 13702:1999
Amd
1:2009
ed. 2
ISO 17776:2000
ISO 15138:2018
ed. 3
ISO 15138:2000; ISO 15138:2007
ISO 15138:2018
ed. 1
ISO/TS 27469:2010
ed. 1
ISO 23251:2006
WITHDRA Amd
WN
1:2008
Cor 1:2007
rev
ISO 28300:2008
ed. 1
Cor 1:2009
ISO 10438-1:2007
ed. 2
rev
ISO 10438-1:2003
ISO 10438-2:2007
ed. 2
ISO 10438-2:2003
ISO 10438-3:2007
ed. 2
ISO 10438-3:2003
GSO ISO 11960:2014
GB/T 21412.8-2010 (ISO 136288:2002, IDT)
[Not adopted]
GSO ISO/PAS
12835:2016
CEN ISO/TR 10400:2011
GSO ISO/TR
10400:2009
SC 5
WG 2
Petroleum and natural gas industries -- Corrosion-resistant alloy
seamless tubes for use as casing, tubing and coupling stock -Technical delivery conditions
SC 5
WG 3
ST RK ISO 13680:2012
(ISO 13680:2010, IDT)
API Spec 5CRA 1st
edition (MOD)
EN ISO 13680:2010
GB/T 21412.9-2009 (ISO 136289:2000, IDT)
WG 4
ST RK 1264:2004 (ISO
13678:2000, MOD);
ST RK ISO 13678:2011
(ISO 13678:2010, IDT)
API RP 5A3 3rd
edition:2009 (IDT)
EN ISO 13678:2012
GB/T 21412.7-2018 (ISO
13628-7:2005, IDT)
WG 1
ST RK ISO 10418-2005
(ISO 10416:2003, IDT)
API RP 14C 8th ed:
2017
EN ISO 10418:2003 +
AC:2009
SC 6
WG 1
ST RK ISO 13702:2006
(ISO 13702:1999, IDT)
API RP 14G 4th
ed:2007
EN ISO 13702:2015
GB/T 23512-2015 (ISO 13678:2010,
IDT)
SC 6
WG 1
ST RK ISO 15544:2006
(ISO 15544:2000, IDT)
EN ISO 15544:2010
GB/T 20972.1-2007 (ISO 151561:2001, IDT)
SC 6
WG 1
ST RK ISO 17776-2004
GOST R ISO 17776-2012
SC 6
WG 11
SC 6
WG 11
TC 67
Petroleum and natural gas industries -- Offshore production
installations -- Analysis, design, installation and testing of basic
TC 67
surface process safety systems
Petroleum and natural gas industries -- Control and mitigation of fires
and explosions on offshore production installations -- Requirements TC 67
and guidelines
Petroleum and natural gas industries -- Offshore production
installations -- Major Accident hazard management during the design TC 67
of new installations
Petroleum and natural gas industries -- Offshore production
TC 67
installations -- Heating, ventilation and air-conditioning
Petroleum and natural gas industries -- Offshore production
TC 67
installations -- Heating, ventilation and air-conditioning
Petroleum, petrochemical and natural gas industries - Method of test
TC 67
for fire dampers
Petroleum, petrochemical and natural gas industries -- PressureTC 67
relieving and depressuring systems
Petroleum, petrochemical and natural gas industries -- Venting of
TC 67
atmospheric and low-pressure storage tanks
Petroleum, petrochemical and natural gas industries -- Lubrication,
shaft-sealing and control-oil systems and auxiliaries -- Part 1:
TC 67
General requirements
Petroleum, petrochemical and natural gas industries -- Lubrication,
shaft-sealing and control-oil systems and auxiliaries -- Part 2: Special- TC 67
purpose oil systems
Petroleum, petrochemical and natural gas industries -- Lubrication,
shaft-sealing and control-oil systems and auxiliaries -- Part 3:
TC 67
General-purpose oil systems
SC 5
SC 6
SC 6
WG 11
SC 6
WG 12
SC 6
WG 12
SC 6
WG 2
SC 6
WG 2
SC 6
WG 2
API 14J 2nd ed:2001
ST RK ISO 15138:2006
(ISO 15138:2000, IDT)
ST RK ISO 15138-2006
(ISO 15138:2000, IDT)
GSO ISO 13680 : 2010
GOST R ISO 13678-2015 (ISO 13678GSO ISO 13678 : 2010
2010, IDT), TC 357
GSO ISO 10418 : 2010
GSO ISO 13702 : 2010
GOST R ISO 17776-2012 (ISO
17776:20000, IDT), TC 023
EN ISO 17776:2002
EN ISO 15138:2007
ISO 15138:2007
GSO ISO 17776:2016
GSO ISO 15138 : 2010
GSO ISO 15138:2010
CEN ISO/TS 27469:2011
ST RK ISO 23251:2010
(ISO 23251:2006, IDT)
ST RK ISO 28300:2010
(ISO 28300:2008, IDT)
Not adopted in KZ
(confirmed by KazInSt).
(In 2020 Plan of TC89)
Not adopted in KZ
(confirmed by KazInSt).
(In 2020 Plan of TC89)
Not adopted in KZ
(confirmed by KazInSt).
(In 2020 Plan of TC89)
GSO ISO 13628-5:2009
GOST 32696-2014 (ISO 11961:2008,
GSO ISO 11961 : 2009
MOD), TC 357
ST RK ISO/TS 10400-2012
API TR 5C3, 7th
(ISO/TR 10400:2007, IDT)
ed.:2018 / ISO
GOST R 54918-2012
10400:2008(IDT)
(ISO/TR 10400:2007)
Petroleum and natural gas industries -- Offshore production
TC 67
installations -- Requirements and guidelines for emergency response
ISO 17776:2016
EN ISO 13679:2006
GB/T 21412.15-2017 ( ISO 1362815:2011, IDT )
Petroleum and natural gas industries -- Equations and calculations for
the properties of casing, tubing, drill pipe and line pipe used as casing TC 67
or tubing
Petroleum and natural gas industries -- Evaluation and testing of
thread compounds for use with casing, tubing, line pipe and drill stem TC 67
elements
ISO 13678:2009
ISO 10418:1993
ST RK ISO 10405-2011
(ISO 10405:2000)
ST RK 1256-2004 (ISO
10405:2000, NEQ);
GOST 34380-2017 (ISO
10405:2000)
GOST 31446-2012
ST RK ISO 11960:2009
(ISO 11960:2004, IDT)
ST RK ISO 11961:2009
(ISO 11961:2008, IDT)
GOST 32696 (ISO
11961:2008)
Petroleum and natural gas industries -- Steel drill pipe
TC 67
GSO ISO 13628-15:2015
GOST R ISO 13628-2-2013 (ISO
13628-2:2006, IDT), TC 023
SC 5
ed. 1
GB/T 20661-2006 (ISO 10420:1994,
IDT)
EN ISO 13628-1:2005 +
A1:2010
Petroleum and natural gas industries -- Steel pipes for use as casing
TC 67
or tubing for wells
ISO/PAS 12835:2013
GSO ‐ Gulf
(updated in Q3 2019)
GOST 32503-2013 (ISO 28781:2010,
GSO ISO 28781:2014
MOD), TC023
API RP 17A 5th
ed:2017
ed. 5
ed. 1
GOST R ‐ Russia
(updated in Q3 2019)
API Spec 17K 3rd
ed:2017
ISO 2645:1975; ISO 11960:1996; ISO
11960:2001; ISO 11960:2004; ISO rev
11960:2011
ISO 13679:2002
GB/T ‐ China
(updated in Q1 2019)
EN ISO 28781:2010
Status: ISO 10420:1994
Withdrawn
https://www.iso.org/standard
/18482.html
ST RK ISO 13628-1:2009
(ISO 13628-1:2005, IDT)
CSA ‐ Canada
(updated in Q3 2019)
WG 6
WG 1
ISO 11961:1996; ISO 11961:2008
API Spec 19V 2nd
ed:2019
WG 6
SC 5
Cor 1:2009
API ‐ USA
CEN ‐ Europe
(updated in Q3 2019) (updated in Q1 2019)
ST RK ISO 28781:2011
(ISO 28781:2010, IDT)
GOST 32503-2013 (ISO
28781:2010)
SC 4
TC 67
Cor 1:2009
ST RK ‐ Kazakhstan
(updated in Q2 2019)
SC 4
ISO 10405:1993
ed. 1
ABNT ‐ Brazil
(update in Q2 2019)
TC 67
ed. 2
ed. 3
Liason TC 67
TC 67
Petroleum and natural gas industries -- Care and use of casing and
tubing
ISO 15463:2003
ISO 10418:2003
TC
Petroleum and natural gas industries -- Design and operation of
subsea production systems -- Part 4: Subsea wellhead and tree
TC 67
equipment
Petroleum and natural gas industries -- Design and operation of
TC 67
subsea production systems -- Part 5: Subsea umbilicals
Petroleum and natural gas industries -- Design and operation of
subsea production systems -- Part 6: Subsea production control
TC 67
systems
Petroleum and natural gas industries -- Design and operation of
subsea production systems -- Part 7: Completion/workover riser
TC 67
systems
Petroleum and natural gas industries -- Design and operation of
subsea production systems -- Part 8: Remotely Operated Vehicle
TC 67
(ROV) interfaces on subsea production systems
Petroleum and natural gas industries -- Design and operation of
subsea production systems -- Part 9: Remotely Operated Tool (ROT) TC 67
intervention systems
Petroleum and natural gas industries -- Modular drilling rigs for
TC 67
offshore fixed platforms
ISO 13628-4:1999
Cor 1:2005
ISO 11961:2018
ISO 13678:2010
Petroleum and natural gas industries -- Flexible pipe systems for
subsea and marine riser applications
Petroleum and natural gas industries -- Design and operation of
subsea production systems -- Part 1: General requirements and
recommendations
Petroleum and natural gas industries -- Design and operation of
subsea production systems -- Part 10: Specification for bonded
flexible pipe
Petroleum and natural gas industries -- Design and operation of
subsea production systems -- Part 11: Flexible pipe systems for
subsea and marine applications
Petroleum and natural gas industries -- Design and operation of
subsea production systems -- Part 15: Subsea structures and
manifolds
ISO 13628-1:1999
ISO 13628-3:2000
ISO 13628-7:2005
Document title
Petroleum and natural gas industries -- Drilling and production
equipment --Subsurface barrier valves and related equipment
ed.1
ISO 13628-10:2005
ISO 10405:2000
work in
progress
Revision of
API Std 521 6th
edition:2014 (MOD)
API Std 2000, 7th
ed.:2014 (MOD)
API Std 614 5th edition
/ ISO 10438-1, 2, 3, 4
(IDT)
API Std 614 5th edition
/ ISO 10438-1, 2, 3, 4
(IDT)
API Std 614 5th edition
/ ISO 10438-1, 2, 3, 4
(IDT)
EN ISO 23251:2007 [status:
withdrawn]
EN ISO 28300:2008 +
AC:2009
EN ISO 10438-1:2007
GB/T 31468-2015 (ISO 12747:2011,
IDT)
GSO ISO/TS 27469:2012
GSO ISO 23251 : 2008
GSO ISO 28300:2009
GSO ISO 10438-1:2009
EN ISO 10438-2:2007
GSO ISO 10438-2:2009
EN ISO 10438-3:2007
GSO ISO 10438-3:2009
11
ISO
Edition
ISO 10438-4:2007
ed. 2
Amd
Cor
ISO 10438-4:2003
Revision of
ISO 10437:2003
ed. 2
ISO 10437:1993
ISO 13703:2000
ed. 1
ISO 14692-1:2017
ed. 2
work in
progress
Document title
Petroleum, petrochemical and natural gas industries -- Lubrication,
shaft-sealing and control-oil systems and auxiliaries -- Part 4: Selfacting gas seal support systems
Petroleum, petrochemical and natural gas industries -- Steam
turbines -- Special-purpose applications
Petroleum and natural gas industries -- Design and installation of
piping systems on offshore production platforms
Petroleum and natural gas industries -- Glass-reinforced plastics
(GRP) piping -- Part 1: Vocabulary, symbols, applications and
materials
Petroleum and natural gas industries -- Glass-reinforced plastics
(GRP) piping -- Part 2: Qualification and manufacture
Cor 1:2002
ISO 14692-1:2002
TC
SC
WG
TC 67
SC 6
WG 2
TC 67
SC 6
WG 3
TC 67
SC 6
WG 5
TC 67
SC 6
WG 5
ISO 14692-2:2017
ed. 2
ISO 14692-2:2002
TC 67
SC 6
WG 5
ISO 14692-3:2017
ed. 2
ISO 14692-3:2002
Petroleum and natural gas industries -- Glass-reinforced plastics
(GRP) piping -- Part 3: System design
TC 67
SC 6
WG 5
ISO 14692-4:2017
ed. 2
ISO 14692-4:2002
Petroleum and natural gas industries -- Glass-reinforced plastics
(GRP) piping -- Part 4: Fabrication, installation and operation
TC 67
SC 6
WG 5
ISO 15649:2001
ed. 1
ISO 24817:2017
ed. 2
ISO 27509:2012
ed.1
ISO 12211:2012
ed. 1
ISO 12212:2012
ed. 1
Petroleum and natural gas industries -- Piping
Cor 1:2013
ISO 13704:2007
ed. 2
ed. 3
ISO 13705:2001; ISO 13705:2006
ISO 13706:2011
ed. 3
ISO 13706:2000; ISO 13706:2005
ISO 15547-1:2005
ed. 1
ISO 15547:2000
Cor 1:2008
ed. 1
ISO 15547:2000
ISO 16812:2019
ed. 3
ISO 16812:2002; ISO 16812:2007
ISO 25457:2008
ed. 1
ISO 10441:2007
ed. 2
ISO 10441:1999
ISO 14691:2008
ed. 2
ISO 14691:1999
ISO 19900:2013
ed. 2
ISO 19900:2002; ISO 13819-1:1995
ed. 2
ISO 19901-8:2014
ed. 1
ed. 1
ISO 10855-2:2018
ed. 1
ISO 10855-3:2018
ed. 1
ISO 19901-1:2015
ed. 2
ISO 19901-1:2005
ISO 19901-2:2017
ed. 2
ISO 19901-2:2004
ISO 19901-3:2014
ed. 2
ed. 1
ISO 13819-2:1995
ISO 19903:2006
ed. 1
ISO 19901-7:2013
ed. 2
ISO 19904-1:2006
ed. 1
ISO 19901-5:2016
ed. 2
ISO 19901-5:2003
ISO 19905-1:2016
ed. 2
ISO 19905-1:2012
ISO 19905-3:2017
ed. 1
ISO/TR 19905-2:2012
ed. 1
ISO 19906:2010
ed. 1
ISO 19901-6:2009
ed. 1
ISO 35101:2017
ed. 1
ISO 35103:2017
ed. 1
ISO 35104:2018
ed. 1
ISO/TS 35105:2018
ed. 1
ISO 35106:2017
ed. 1
ISO 20088-1:2016
ed. 1
rev
rev
ISO/TR 13637:1997; ISO 19901-7:2005
rev
rev
rev
Cor 1: 2011
rev
API ‐ USA
CEN ‐ Europe
(updated in Q3 2019) (updated in Q1 2019)
API Std 614 5th edition
/ ISO 10438-1, 2, 3, 4
(MOD)
API Std 612 7th
edition:2014
API RP 14E 5th
ed:1991
ST RK 1255-1:2004 (ISO
14692-1:2002, MOD)
ABNT NBR ISO 15649 : 2004
GB/T 20970-2015 (ISO 14310:2008,
MOD)
GSO ISO 14692-2:2008
GB/T 20173-2013 (ISO 14313:2007,
MOD)
GSO ISO 14692-3:2008
EN ISO 14692-4:2002 +
AC:2007
GB/T 35147-2017 (ISO 14691:2008,
MOD)
GSO ISO 14692-4:2008
CEN/TR 14549:2004 [Guide
to use ISO 15649:2001 in
EU context]
GB/T 35988-2018 (ISO 155892:2012, NEQ)
GSO ISO 15649:2015
EN ISO 27509:2012 +
AC:2013
GOST ISO 12211-2016
SC 6
WG 8
SC 6
WG 8
TC 67
SC 6
WG 8
SC 6
WG 8
SC 6
WG 8
TC 67
SC 6
WG 8
TC 67
SC 6
TC 67
API Std 664 1st
ed:2014
API Std 663 1st
ed:2014
API Std 530 7th
edition:2015 (MOD)
ST RK ISO 13704:2011
(ISO 13704:2007, IDT)
GOST R 53682-2009 (ISO
Std 560 5th ed:2016
13705:2006)
ST RK ISO 13706:2009
(ISO 13706:2005, IDT);
API Std 661 7th
GOST ISO 13706:2011 (ISO edition:2013 (MOD)
13706:2000, IDT)
ST RK ISO 15547:2004
(ISO 15547:2000, IDT)
API Std 668 1st
ed:2018
GOST ISO 15547-1-2016
ГОСТ Р ISO 15547-1-2009
EN ISO 12211:2012
EN ISO 12212:2012
EN ISO 15547-1:2005
GB/T 20972.3-2008 (ISO 151563:2003, MOD)
EN ISO 15547-2:2005
GB/T 20656-2006 (ISO 15463:2003,
IDT)
GSO ISO 15547-2:2008
EN ISO 16812:2007
GB/T 21410-2015 (ISO 16070:2005, GOST R 53677-2009 (ISO
MOD)
16812:2007, MOD), TC 023
GSO ISO 16812 : 2008
WG 9
ST RK ISO 10441:2012
(ISO 10441:2007, IDT)
API Std 671 4th edition
EN ISO 10441:2007
/ ISO 10441:2007 (IDT)
SC 6
WG 9
ST RK ISO 14691:2012
(ISO 14691:2008, IDT)
(National Adoption under
EN ISO 14691:2008
committee consider.)
TC 67
SC 7
WG 1
TC 67
SC 7
WG 10
ST RK ISO 19901-4:2006
(ISO 19901-4:2003, IDT)
ST RK ISO 19901-8-2016
TC 67
SC 7
WG 10
SC 7
WG 11
API Std 2CCU:2017
TC 67
SC 7
WG 11
API Std 2CCU:2017
TC 67
SC 7
WG 11
TC 67
SC 7
WG 3
TC 67
SC 7
WG 3
ST RK ISO 19901-2-2006
GOST R 57123-2016 (ISO
19901-2:2004)
ST RK ISO 19901-2:2006
(ISO 19901-2:2004, IDT)
Petroleum and natural gas industries -- Specific requirements for
offshore structures -- Part 3: Topsides structure
TC 67
SC 7
WG 3
Petroleum and natural gas industries -- Fixed steel offshore
structures
TC 67
SC 7
WG 3
Petroleum and natural gas industries -- Fixed concrete offshore
TC 67
structures
Petroleum and natural gas industries -- Specific requirements for
offshore structures -- Part 7: Stationkeeping systems for floating
TC 67
offshore structures and mobile offshore units
Petroleum and natural gas industries -- Floating offshore structures -TC 67
Part 1: Monohulls, semi-submersibles and spars
Petroleum and natural gas industries -- Specific requirements for
offshore structures -- Part 5: Weight control during engineering and TC 67
construction
Petroleum and natural gas industries -- Site-specific assessment of
TC 67
mobile offshore units -- Part 1: Jack-ups
Petroleum and natural gas industries -- Site-specific assessment of
TC 67
mobile offshore units -- Part 3: Floating unit
Petroleum and natural gas industries -- Site-specific assessment of
mobile offshore units -- Part 2: Jack-ups commentary and detailed
TC 67
sample calculation
WG 4
GOST ISO 19903-2015
WG 5
ST RK ISO 19901-7:2006
(ISO 19901-7:2005, IDT)
SC 7
WG 5
SC 7
WG 6
SC 7
WG 7
SC 7
WG 7
WG 7
WG 8
GSO ISO 10441:2008
GB/T 24258-2009 (ISO
13880:1999, MOD)
EN ISO 19900:2002
CAN/CSA ISO 19900:14
EN ISO 19901-4:2003
CAN/CSA ISO 19901-4:17
EN ISO 19901-8:2015
CAN/CSA ISO 19901-8:15
ABNT NBR ISO 19901-5 : 2006
EN ISO 19902:2007
GOST R 57148-2016 (MOD)
GSO ISO 19901-1:2012
GOST R 57123-2016 (MOD)
GSO ISO 19901-2:2011
CAN/CSA ISO 19901-3:15
GOST R 57555-2017 (MOD)
GSO ISO 19901-3:2016
CAN/CSA Z19902:09
GOST 34476-2018 (MOD), TC023
GSO ISO
19902:2010((include
Amend 1)
EN ISO 19903:2006
CAN/CSA ISO 19903:07
GSO ISO 19903:2012
API RP 2SK 3rd
ed:2005
EN ISO 19901-7:2013
CAN/CSA ISO 19901-7:14
GSO ISO 19901-7:2014
API RP 2FPS 2nd
ed.:2011 (MOD)
EN ISO 19904-1:2006
CAN/CSA ISO 19904-1:07
ST RK ISO 19901-5-2006
EN ISO 19901-5:2003
CAN/CSA ISO 19901-5:16
ST RK ISO 19905-1-2016
EN ISO 19905-1:2012
CAN/CSA Z19905-1:13
GSO ISO 19905-1:2014
CAN/CSA-ISO/TR 19905-2:14
GSO ISO/TR 199052:2017
TC 67
SC 7
WG 9
SC 8
WG 1
CSA ISO 35101:19
CSA ISO 35103:19
Petroleum and natural gas industries -- Arctic operations -- Material
requirements for arctic operations
Petroleum and natural gas industries -- Arctic operations -Metocean, ice, and seabed data
Determination of the resistance to cryogenic spillage of insulation
materials -- Part 1: Liquid phase
SC 8
WG 3
WG 4
TC 67
SC 8
WG 5
TC 67
SC 8
WG 6
TC 67
SC 9
JWG 3
GSO ISO 19900:2008
GSO ISO 19901-4:2011
CAN/CSA ISO 19901-1:16
TC 67
SC 8
GOST R 54483-2011 (ISO
19900:2002, IDT), TC 023
GB/T 23511-2009 (ISO
19900:2002, IDT)
CAN/CSA ISO 19901-2:17
Petroleum and natural gas industries -- Specific requirements for
offshore structures -- Part 6: Marine operations
Petroleum and natural gas industries -- Arctic operations -- Working
environment
Petroleum and natural gas industries -- Arctic operations -Environmental monitoring
TC 67
GSO ISO 14691:2009
GB/T 5005-2010 (ISO 13500:2008,
MOD)
SY/T 6960-2013 (ISO 10497:2010,
MOD)
TC 67
TC 67
GSO ISO 15547-1:2008
GSO ISO 25457 : 2009
Petroleum and natural gas industries -- Arctic offshore structures
Petroleum and natural gas industries -- Arctic operations -- Ice
management
GOST R ISO 15547-1-2009 (ISO
15547-1:2005, IDT), TC 023
EN ISO 25457:2008
API RP 2MET 1st ed:1st
ed:2014 / ISO 19901EN ISO 19901-1:2005
1:2006 (MOD)
API RP 2EQ 1t ed:2014
/ ISO 19901-2:2004
EN ISO 19901-2:2004
(MOD)
API RP 2TOP 1st
ed:2019 / ISO 19901EN ISO 19901-3:2010
3:2010
API RP 2A-LRFD 2nd
ed:2019
SC 7
SC 7
GSO ISO 13706:2015
API Std 2CCU:2017
SC 7
SC 7
GSO ISO 13705:2014
GB/T 20660-2006 (ISO 13702:1999,
IDT)
API Std 660 9th
ed.:2015 (MOD)
API Std 537 3rd
ed:2017
TC 67
GSO ISO 13704:2008
EN ISO 13706:2011
ST RK ISO 16812:2004
(ISO 16812:2002, IDT)
ST RK ISO 25457:2011
(ISO 25457:2008, IDT)
API RP 2GEO 1st
ed:2011 / ISO 199012:2004 (MOD)
GSO ISO 12211:2014
GSO ISO 12212:2015
GOST R 53682-2009 (ISO
13705:2005, MOD), TC 023
EN ISO 13705:2012
API Std 668 1st
ed:2018
ST RK ISO 19900-2016
GOST R 54483-2011 (ISO
19900:2002)
GSO ISO 24817 : 2010
GB/T 34903.1-2017 (ISO 239361:2009.MOD)
GB/T 19830-2017 (ISO 11960:2014,
IDT)
GB/T 29166-2012 (ISO 11961:2008,
MOD)
GB/T 23802-2015 (ISO 13680:2010,
IDT)
EN ISO 13704:2007 +
AC:2009
ST RK ISO 15547-2004
(ISO 15547:2000)
ABNT NBR ISO 19900 : 2004
GSO ISO 14692-1:2008
EN ISO 14692-2:2002 +
AC:2006
EN ISO 24817:2015
GOST ISO 12212-2016
GSO ISO 13703 : 2010
GB/T 20172-2006 (ISO 14224:1999,
IDT)
EN ISO 14692-3:2002 +
AC:2006
ST RK ISO 24817:2010
(ISO/TS 24817:2006, IDT)
WG 8
GSO ‐ Gulf
(updated in Q3 2019)
GSO ISO 10437:2008
EN ISO 13703:2000 +
AC:2007
GOST ISO 27509-2016
WG 8
GOST R ‐ Russia
(updated in Q3 2019)
GSO ISO 10438-4:2009
WG 5
SC 6
GB/T ‐ China
(updated in Q1 2019)
EN ISO 10437:2003
EN ISO 14692-1:2002
ST RK 1255-2:2004 (ISO
14692-2:2002, MOD)
ST RK ISO 14692-3-2018
ST RK 1255-3:2004 (ISO
14692-3:2002, MOD)
ST RK 1255-4:2004 (ISO
14692-4:2002, MOD)
ST RK ISO 15649:2011
(ISO 15649:2001, IDT);
ST RK 1267:2004 (ISO
15649:2001, MOD)
SC 6
CSA ‐ Canada
(updated in Q3 2019)
EN ISO 10438-4:2007
WG 5
Petroleum, petrochemical and natural gas industries -- Plate-type
heat exchangers -- Part 1: Plate-and-frame heat exchangers
Petroleum and natural gas industries -- Specific requirements for
offshore structures -- Part 2: Seismic design procedures and criteria
ST RK ‐ Kazakhstan
(updated in Q2 2019)
Not adopted in KZ
(confirmed by KazInSt).
(In 2020 Plan of TC89)
ST RK ISO 10437:2012
(ISO 10437:2003, IDT)
ST RK ISO 13703:2006
(ISO 13703:2000, IDT)
SC 6
WG 8
Petroleum and natural gas industries -- General requirements for
offshore structures
ABNT ‐ Brazil
(update in Q2 2019)
SC 6
SC 6
Petroleum and natural gas industries -- Specific requirements for
offshore structures -- Part 4: Geotechnical and foundation design
considerations
Petroleum and natural gas industries -- Specific requirements for
offshore structures -- Part 8: Marine soil Investigations
Offshore containers and associated lifting sets -- Part 1: Design,
manufacture and marking of offshore containers
Offshore containers and associated lifting sets -- Part 2: Design,
manufacture and marking of lifting sets
Offshore containers and associated lifting sets -- Part 3: Periodic
inspection, examination and testing
Petroleum and natural gas industries -- Specific requirements for
offshore structures -- Part 1: Metocean design and operating
considerations
ISO 19901-3:2010
Amd 1:
2013
WG 5
TC 67
Petroleum, petrochemical and natural gas industries -- Flare details
for general refinery and petrochemical service
Petroleum, petrochemical and natural gas industries -- Flexible
couplings for mechanical power transmission -- Special-purpose
applications
Petroleum, petrochemical and natural gas industries -- Flexible
couplings for mechanical power transmission -- General-purpose
applications
rev
SC 6
Petroleum, petrochemical and natural gas industries -- Air-cooled
heat exchangers
Petroleum, petrochemical and natural gas industries -- Plate-type
heat exchangers -- Part 2: Brazed aluminium plate-fin heat
TC 67
exchangers
Petroleum, petrochemical and natural gas industries -- Shell-and-tube
TC 67
heat exchangers
ISO 19901-4:2003
ISO 10855-1:2018
ISO 19902:2007
Petroleum, petrochemical and natural gas industries -- Hairpin-type
TC 67
heat exchangers
Petroleum, petrochemical and natural gas industries -- Calculation of
TC 67
heater-tube thickness in petroleum refineries
Petroleum, petrochemical and natural gas industries -- Fired heaters
TC 67
for general refinery service
ISO 13704:2001
ISO 15547-2:2005
ISO 19901-4:2016
Petroleum, petrochemical and natural gas industries -- Composite
repairs for pipework -- Qualification and design, installation, testing
TC 67
and inspection
Petroleum and natural gas industries -- Compact flanged connections
TC 67
with IX seal ring
Petroleum, petrochemical and natural gas industries -- Spiral plate
TC 67
heat exchangers
ISO 24817:2015
ISO 13705:2012
TC 67
Liason TC 67
EN ISO 19906:2010
API RP 2MOP 1st
edition (IDT)
EN ISO 19901-6:2009
GOST Р 58036-2017 (MOD)
GSO ISO 19901-5:2011
CAN/CSA ISO 19906:11
CAN/CSA ISO 19901-6:10
GSO ISO 19901-6:2011
GOST R 58215-2018 (MOD)
GOST R 58114-2018 (MOD), GOST
R 58051-2018 (MOD), GOST R
58052-2018 (MOD), GOST R 582832018(MOD)
CSA ISO 35106:19
API RP 2N 3rd ed:2013
/ ISO 19906:2010
(MOD)
GB/T 9711-2017 (ISO 3183:2012,
MOD)
GOST R 58113-2018 (MOD); GOST
R 58112-2018 (MOD)
GB/T 35989.1-2018 (ISO 199041:2006, IDT)
12
ISO
Edition
Amd
Cor
work in
progress
Revision of
Document title
ISO 13879:1999
ed. 1
Petroleum and natural gas industries -- Content and drafting of a
functional specification
ISO 13880:1999
ed. 1
Petroleum and natural gas industries -- Content and drafting of a
technical specification
ISO/TR 13881:2000
ed. 1
ISO/TS 17969:2017
ed. 2
ISO/TS 17969:2015
ISO/TS 29001:2010
ed. 3
ISO/TS 29001:2003; ISO/TS
29001:2007
ISO 14224:2016
ed. 3
ISO 15663-1:2000
ed. 1
ISO 15663-2:2001
ed. 1
ISO 15663-3:2001
ed. 1
ISO 19008:2016
ed. 1
ISO 20815:2018
ed. 2
ISO/TR 12489:2013
ed. 1
ISO 13085:2014
ed. 1
ISO 15546:2011
ed. 3
ISO 20312:2011
ed. 1
ISO 27627:2014
ed. 1
ISO 15156-1:2015
ed. 3
ISO 15156-2:2015
ISO 15156-3:2015
ed. 3
ed. 3
ISO 23936-1:2009
ed. 1
ISO 23936-2:2011
ed. 1
ISO 17348:2016
ed. 1
rev
ISO 14224:1999; ISO 14224:2006
TC 67
WG 2
TC 67
WG 2
WG 2
WG 2
Petroleum, petrochemical and natural gas industries -- Sectorspecific quality management systems -- Requirements for product
and service supply organizations
WG 2
TC 67
Petroleum, petrochemical and natural gas industries -- Collection and
TC 67
exchange of reliability and maintenance data for equipment
WG 4
Petroleum and natural gas industries -- Life cycle costing -- Part 1:
Methodology
WG 4
Petroleum, petrochemical and natural gas industries -- Production
assurance and reliability management
Petroleum, petrochemical and natural gas industries -- Reliability
modelling and calculation of safety systems
Petroleum and natural gas industries -- Aluminium alloy pipe for use
as tubing for wells
ISO 15546:2007
WG
Petroleum and natural gas industries -- Classification and conformity
TC 67
assessment of products, processes and services
Petroleum and natural gas industries -- Life-cycle costing -- Part 2:
Guidance on application of methodology and calculation methods
ISO 15546:2002;
SC
Petroleum, petrochemical and natural gas industries -- Guidelines on
TC 67
competency for personnel
Petroleum and natural gas industries -- Life-cycle costing -- Part 3:
Implementation guidelines
Standard cost coding system for oil and gas production and
processing facilities
ISO 20815:2008
TC
Petroleum and natural gas industries -- Aluminium alloy drill pipe
TC 67
ST RK ISO 20815:2011
(ISO 20815:2008, IDT)
GOST R ISO 20815-2013
EN ISO 20815:2010
FprCEN ISO/TR 12489
[status: under publication]
TC 67
WG 5
GOST ISO 13085-2016
EN ISO 13085:2014
GSO ISO 13085:2017
TC 67
WG 5
ST RK ISO 15546-2011
(ISO 15546:2007, IDT)
EN ISO 15546:2011
GSO ISO 15546:2012
GSO ISO 20312:2014
TC 67
WG 5
ST RK ISO 20312-2015
EN ISO 20312:2011
ST RK ISO 27627-2015
EN ISO 27627:2014
WG 7
WG 7
WG 7
TC 67
WG 7
TC 67
WG 7
ST RK ISO 23936-2-2016
TC 67
WG 8
ST RK ISO 17348-2017
ST RK EN ISO 16904-2017
WG 11
ST RK ISO 16961-2017
TC 67
WG 11
TC 67
WG 11
ISO 18796-1:2018
ed. 1
ISO 18797-1:2016
ed. 1
ISO 19277:2018
ed. 1
testing and acceptance criteria for protective coating systems under insulation TC 67
WG 11
ISO 17349:2016
ed. 1
Petroleum and natural gas industries -- Offshore platforms handling
TC 67
streams with high content of CO2 at high pressures
WG 12
ISO 17945:2015
ed. 1
JWG
ed. 2
TC 115 SC 3
JWG 1
ed. 1
Petroleum, petrochemical and natural gas industries -- Reciprocating
TC 115 SC 3
positive displacement pumps
JWG 2
ISO 21049 : 2004
ed. 1
Pumps -- Shaft sealing systems for centrifugal and rotary pumps
TC 115 SC 3
JWG 2
Petroleum, chemical and gas service industries -- Centrifugal
compressors
TC 118 SC 1
JWG 1 SC 6
ed. 1
ISO 10439:2002
EN ISO 23936-2:2011
API RP 652 4th
ed:2014
EN ISO 16961:2015
GOST ISO 15156-3-2012 (ISO 15156GSO ISO 15156-3:2010
3:2009, IDT), TC 023
GSO ISO 23936-2:2016
GB/T 37265-2018 (ISO 20312:2011,
IDT)
GB/T 29167-2012 (ISO 16708:2006,
IDT)
EN ISO 17945:2015
ISO 13710:2004
ISO 10439-4:2015
EN ISO 23936-1:2009
GOST ISO 15156-2-2013 (ISO 15156GSO ISO 15156-2:2010
2:2009, IDT), TC 023
ST RK ISO 17349-2017
TC 67
ISO 13709:2009
ISO 10439:2002
GB/T 21411.1-2014 (ISO 151361:2009, MOD)
EN ISO 15156-3:2015
NACE MR0175-2015 /
[status: to be published
ISO 15156 Series:2015
soon]
TC 67
TC 105
GSO ISO/TR
12489:2017
GB/T 35148-2017 (ISO 14998:2013, GOST ISO 15156-1-2013 (ISO 15156GSO ISO 15156-1:2010
MOD)
1:2009, IDT), TC 023
EN ISO 16904:2015 [under
CEN/TC 282; status: to be
published soon]
WG 10
ed. 1
GSO ISO 20815:2009
EN ISO 15156-2:2015
NACE MR0175-2015 /
[status: to be published
ISO 15156 Series:2015
soon]
EN ISO 21457:2010
TC 67
ed. 1
ISO 16961:2015
GOST R ISO 20815-2013 (ISO
20815:2015, IDT), TC 023
EN ISO 15156-1:2015
NACE MR0175-2015 /
[status: to be published
ISO 15156 Series:2015
soon]
ST RK ISO 21457:2011
(ISO 21457:2010, IDT)
TC 67
ISO 16904:2016
ed. 1
ST RK ISO 15156-1:2011
(ISO 15663-1:2000, IDT)
GOST R 53679-2009 (ISO
15156-1:2001)
ST RK ISO 15156-2:2011
(ISO 15663-2:2001, IDT)
GOST R 53678-2009 (ISO
15156-2:2003)
ST RK ISO 15156-3-2011
(ISO 15663-3:2001, IDT);
GOST ISO 15156-3-2011
(ISO 15156-3:2009, IDT)
ST RK ISO 23936-1:2011
(ISO 23936-1:2009, IDT)
WG 8
ISO 10439-3:2015
ABNT NBR ISO 20815 : 2017
WG 5
TC 67
ISO 10439:2002
GSO ISO 15663-1:2008
ST RK ISO 12489-2016
Petroleum, petrochemical and natural gas industries -- Materials
selection and corrosion control for oil and gas production systems
ed. 1
GSO ISO 14224:2009
SY/T 5257-2012 (ISO 155901:2001, NEQ)
WG 4
ed.1
ISO 10439-2:2015
EN ISO 15663-1:2006
WG 4
ISO 21457:2010
ISO 10439:2002
ST RK 1265-1:2004 (ISO
15663-1:2000, MOD)
GSO ISO TS 29001 :
2012
TC 67
WG 8
ed. 1
GOST R ISO/TS 29001:2007 (ISO
29001:2010, IDT), TC 10
CEN ISO/TS 29001:2011
API Std 689 1st edition /
EN ISO 14224:2006
ISO 14224:2006 (IDT)
WG 4
WG 8
ISO 10439-1:2015
ABNT NBR ISO 14224 : 2011
ST RK 1268:2004 (ISO
14224:1999, MOD)
TC 67
TC 67
Petroleum, petrochemical and natural gas industries -- Axial and
centrifugal compressors and expander-compressors -- Part 1:
General requirements
Petroleum, petrochemical and natural gas industries -- Axial and
centrifugal compressors and expander-compressors -- Part 2: Nonintegrally geared centrifugal and axial compressors
Petroleum, petrochemical and natural gas industries -- Axial and
centrifugal compressors and expander-compressors -- Part 3:
Integrally geared centrifugal compressors
Petroleum, petrochemical and natural gas industries -- Axial and
centrifugal compressors and expander-compressors -- Part 4:
Expander-compressors
ST RK ISO/ТС 29001:2006
API Spec Q1 9th
(ISO/TS 29001:2003, IDT);
ed.:2013 (MOD)
TC 67
TC 67
ISO 10439:2002
ABNT ISO/TS 29001 : 2010
GSO ISO 15663-2:2008
Petroleum, petrochemical and natural gas industries -- Scheme for
conformity assessment of manufacturers of special materials
ISO 13709:2003
GSO ISO/TR
13881:2008
GSO ISO 15663-3:2009
ed. 1
Centrifugal pumps for petroleum, petrochemical and natural gas
industries
CEN ISO/TR 13881:2011
CEN ISO/TS 17969:2015
GB/T 29168.2-2012 (ISO 155902:2003, MOD)
ISO 15156-3:2003; ISO 15156-3:2003
ed. 1
GSO ISO 13879:2008
GSO ISO 13880:2008
GB/T 29168.3-2012 (ISO 155903:2004, MOD)
ed.1
ISO 10425:2003
[not adopted]
[not adopted]
[not adopted]
Petroleum and natural gas industries -- Materials for use in H2Scontaining environments in oil and gas production -- Part 3: Cracking- TC 67
resistant CRAs (corrosion-resistant alloys) and other alloys
Petroleum, petrochemical and natural gas industries -- Metallic
materials resistant to sulfide stress cracking in corrosive petroleum
refining environments
Petroleum and natural gas industries -- Performance testing of
cementing float equipment
Steel wire ropes for the petroleum and natural gas industries -Minimum requirements and terms of acceptance
GSO ‐ Gulf
(updated in Q3 2019)
[not adopted]
ISO 15156-2:2003; ISO 15156-2:2009
withdrawn
GOST R ‐ Russia
(updated in Q3 2019)
ST RK 1265-2:2004 ( ISO
15663-2:2001, MOD)
Petroleum and natural gas industries -- Materials for use in H2Scontaining environments in oil and gas production -- Part 2: Cracking- TC 67
resistant carbon and low-alloy steels, and the use of cast irons
ISO 10427-3:2003
GB/T ‐ China
(updated in Q1 2019)
ST RK 1265-3:2004 (ISO
15663-3:2001, MOD)
ISO 17781:2017
WITHDRAWN
ST RK ISO/TR 13881:2006
(ISO/TR 13881:2000, IDT)
CSA ‐ Canada
(updated in Q3 2019)
WG 4
ISO 17782:2018
ISO 18165:2001
API ‐ USA
CEN ‐ Europe
(updated in Q3 2019) (updated in Q1 2019)
ST RK ISO 13879:2004
(ISO 13879:1999, IDT)
GOST R ISO 13879-2009
ST RK ISO 13880:2004
(ISO 13880:1999, IDT)
GOST R ISO 13880-2010
WG 4
Petroleum and natural gas industries -- Materials for use in H2Scontaining environments in oil and gas production -- Part 1: General
principles for selection of cracking-resistant materials
Petroleum, petrochemical and natural gas industries -- Internal
coating and lining of steel storage tanks
Petroleum, petrochemicals and natural gas industries -- Internal
coating and lining of carbon steel process vessels -- Part 1:
Technical requirements
Petroleum, petrochemical and natural gas industries -- External
corrosion protection of risers by coatings and linings -- Part 1:
Elastomeric coating systems-polychloroprene or EPDM
Petroleum, petrochemical and natural gas industries -- Qualification
ST RK ‐ Kazakhstan
(updated in Q2 2019)
TC 67
ISO 15156-1:2001; ISO 15156-1:2009
Petroleum and natural gas industries - Design and testing of LNG
marine transfer arms for conventional onshore terminals
ABNT ‐ Brazil
(update in Q2 2019)
TC 67
Petroleum and natural gas industries -- Design and operating limits of
TC 67
drill strings with aluminium alloy components
Petroleum and natural gas industries -- Aluminium alloy drill pipe
TC 67
thread connection gauging
Petroleum, petrochemical and natural gas industries -- Non-metallic
materials in contact with media related to oil and gas production -Part 1: Thermoplastics
Petroleum, petrochemical and natural gas industries -- Non-metallic
materials in contact with media related to oil and gas production -Part 2: Elastomers
Petroleum and natural gas industries -- Materials selection for high
content CO2 for casing, tubing and downhole equipment
Petroleum, petrochemical and natural gas industries -- Test methods
for quality control of microstructure of ferritic/austenitic (duplex)
stainless steels
Liason TC 67
ST RK ISO 10425-2012
(ISO 10425:2003 IDT)
ST RK ISO 13709:2004
(ISO 13707:2003 IDT)
GOST 32601-2013 (ISO
13709:2009)
ST RK ISO 13710:2006
(ISO 13710:2004 IDT)
ST RK ISO 10439:2004
(ISO 10439:2002 IDT)
ST RK ISO 10439-2004
(ISO 10439:2002 IDT)
API Spec 10F 4th
ed:2018
API Spec 9A 26th ed:
2011
API Std 610 11th
edition:2010
API Std 674 3rd
ed:2010
API Std 682 4th ed:
2014 / ISO 21049:2004
(IDT)
GSO ISO 10425:2013
EN ISO 13709:2009
GSO ISO 13709:2008
EN ISO 13710:2004
GSO ISO 13710:2008
EN ISO 21049:2004
GSO ISO 21094:2013
API Std 617 8th
ed:2017
[revised and split in four
parts]
GSO ISO 10439:2014
API Std 617 8th
ed:2017
EN ISO 10439-1:2015
GSO ISO 10439-1:2015
TC 118 SC 1
JWG 1 SC 6
TC 118 SC 1
JWG 1 SC 6
ST RK ISO 10439:2004
(ISO 10439:2002 IDT)
API Std 617 8th
ed:2017
EN ISO 10439-2:2015
GSO ISO 10439-2:2015
TC 118 SC 1
JWG 1 SC 6
ST RK ISO 10439:2004
(ISO 10439:2002 IDT)
API Std 617 8th
ed:2017
EN ISO 10439-3:2015
GSO ISO 10439-3:2015
TC 118 SC 1
JWG 1 SC 6
ST RK ISO 10439:2004
(ISO 10439:2002 IDT)
API Std 617 8th
ed:2017
EN ISO 10439-4:2015
GSO ISO 10439-4:2015
13
EN ISO 10440-1:2007
GSO ISO 10440-1:2013
JWG 3 SC 6
ST RK ISO 10440-2: 2004
(ISO 10440-2:2001 IDT)
EN ISO 10440-2:2001
GSO ISO 10440-2:2013
ed. 1
ed. 1
Petroleum and natural gas industries -- Packaged reciprocating gas
compressors
TC 118 SC 1
JWG 2 SC 6
ISO 13707:2000
ed. 1
Petroleum and natural gas industries -- Reciprocating compressors
TC 118 SC 1
JWG 2 SC 6
ISO 10434:2004
ed. 2
ISO 10434:1998
Bolted bonnet steel gate valves for the petroleum, petrochemical and
TC 153 SC 1
allied industries
JWG 1 SC 6
ISO 10497:2010
ed. 3
ISO 10497:2004; ISO 10497:1992
Testing of valves -- Fire type-testing requirements
TC 153 SC 1
JWG 6 SC 6
ISO 15761:2002
ed. 1
Steel gate, globe and check valves for sizes DN 100 and smaller, for
TC 153 SC 1
the petroleum and natural gas industries
JWG 1 SC 6
ISO 17292:2015
ed. 2
ed. 1
ISO 3977-7:2002
ed. 1
ISO 3977-8:2002
ed. 1
ISO 13691:2001
ed. 1
SC
CEN ‐ Europe
(updated in Q1 2019)
ISO 13631:2002
ISO 3977-5:2001
TC
TC 118 SC 1
API Std 619 5th
edition:2010 / ISO
10440-1:2007 (IDT)
ISO 10442:2002
ed. 2
Document title
API ‐ USA
(updated in Q3 2019)
ed. 1
ISO 10440-1:2000
Petroleum, petrochemical and natural gas industries -- Rotary-type
positive-displacement compressors -- Part 1: Process compressors
ST RK ‐ Kazakhstan
(updated in Q2 2019)
ISO 10440-2:2001
ed. 1
Revision of
ST RK ISO 10440-1: 2004
(ISO 10440-1:2000 IDT)
ed. 2
ISO 18888:2017
Cor
JWG 3 SC 6
Edition
ISO 10440-1:2007
ISO 3977-3:2004
Amd
work in
progress
ISO
Petroleum and natural gas industries -- Rotary-type positivedisplacement compressors -- Part 2: Packaged air compressors (oil- TC 118 SC 1
free)
Petroleum, chemical and gas service industries -- Packaged,
TC 118 SC 1
integrally geared centrifugal air compressors
ISO 17292:2004
Metal ball valves for petroleum, petrochemical and allied industries
WG
Liason TC 67
JWG 1 SC 6
TC 153 SC 1
JWG
Gas turbines -- Procurement -- Part 3: Design requirements
TC 192 SC 6
Gas turbine combined cycle power plants -- Thermal performance
TC 192
tests
Gas turbines -- Procurement -- Part 5: Applications for petroleum and
TC 192
natural gas industries
Gas turbines -- Procurement -- Part 7: Technical information
TC 192
Gas turbines -- Procurement -- Part 8: Inspection, testing, installation
TC 192
and commissioning
Petroleum and natural gas industries -- High-speed special-purpose
TC 60 SC 2
gear units
WG 4
SC 6
ABNT ‐ Brazil
(update in Q2 2019)
ST RK 10442:2004
(ISO 10442:2002 IDT)
ST RK ISO 13631-2004
GOST R 54802-2011 (ISO
13631:2002)
ST RK ISO 13707:2004
(ISO 13707:2000 IDT)
GOST 31843-2013 (ISO
13707:2000)
ST RK ISO 10434:2006
(ISO 10434:2004 IDT)
ST RK ISO 10497-2010
(ISO 10497:2010 IDT)
ST RK 15761:2004
(ISO 15761:2002 IDT)
ST RK ISO 17292 - 2010
API Std 672 4th
ed:2004
API Std 618 5th
ed:2007
CSA ‐ Canada
(updated in Q3 2019)
GB/T ‐ China
(updated in Q1 2019)
GOST R ‐ Russia
(updated in Q3 2019)
EN ISO 10442:2002
GSO ‐ Gulf
(updated in Q3 2019)
GSO ISO 10442:2014
EN ISO 13631:2002
GB/T 21412.6-2018 (ISO 136286:2006, IDT)
[status: abandoned]
GB/T 23803-2009 (ISO 13703:2000,
IDT)
GSO ISO 13707:2015
GB/T 28259-2012 (ISO 10432:2004,
MOD )
GSO ISO 10434:2013
API Std 600 13th
EN ISO 10434:2004 [under
ed:2015
CEN/TC 69]
API Std 607 5th edition / EN ISO 10497:2010 [under
ISO 10497
CEN/TC 69]
API Std 602 10th
EN ISO 15761:2002
ed:2015
API Std 608 5th
EN ISO 17292:2004 [under
ed:2012
CEN TC/69]
GOST R ISO 13631:2002, TC 023
GSO ISO 13631:2014
GSO ISO 10497:2013
GSO ISO 15761:2013
SY/T 6915.1-2012 (ISO 170781:2004, MOD)
GSO ISO 17292:2013
GSO ISO 3977-3:2015
WG 14
ST RK ISO 3977-5-2012
(ISO 3977-5:2001, IDT)
WG 4
GSO ISO 3977-5:2015
WG 4
GSO ISO 3977-7:2015
WG 4
JWG
GSO ISO 3977-8:2015
SC 6
API Std 613 5th
ed:2003
EN ISO 13691:2002
GSO ISO 13691:2009
14
For further information and publications, visit the website at
http://www.iso.org
15