URL: https://thephoenixcontrols.com/product/ds200tccag1b-un/
Specifications:
MPN: DS200TCCAG1B
Manufacturer: General Electric
Series: Mark V
Product Type: TC2000 Analog I/O Module
Function: Control Board
Description:
●
●
●
●
●
●
●
●
●
●
●
●
●
●
DS200TCCAG1B is a GE Mark V TC2000 Analog I/O Module.
This Module connects to the operator interface through the CTBA card.
It has one 80196 microprocessor and multiple PROM modules.
This Analog I/O Module contains 1 LED and 2 50-pin connectors.
When looking at the board from the side, the LED is visible. The 50-pin connectors'
IDs are JCC and JDD.
A programmable logic device is a part of the TC2000 Analog I/O Module.
3 Jumpers are also included in the GE Mark V DS200TCCAG1B Module..
The GE I/O TC2000 Analog Board DS200TCCAG1B has two features that make it
possible to do the same task.
First, you can configure the jumpers on the original board to match their settings on
the working board.
The configuration will be the same and offer the same processing this way.
Remove the flawed board and arrange it on a spotlessly clean, level surface to align
the jumpers.
Place the new board next to the flawed one on a flattened static protective bag after
removing it from the static protective bag.
Take a look at the jumpers on the old board while wearing a wrist strap. After that,
adjust the jumpers on the new board to correspond with their settings.
The new board will function the same when inserted in the drive, even though it is a
newer version. This is as a result of thorough product testing that guarantees all
versions are functional in the drive.
The Phoenix Controls has the best prices on the GE Mark V Unused DS200TCCAG1B TC2000
Analog I/O Module. Check out our inventory of GE Speedtronic, GE Excitation, Woodward,
GE LCI, and Bently Nevada spare parts. Our Tech Team is ready to assist. To get a quote,
please call +85259168256 or email sales@thephoenixcontrols.com.