GENERAL OCCUPATIONAL HEALTH AND SAFETY QUIZ 1. Which of the following is an example of personal protective equipment (PPE)? a) Fire extinguisher b) Safety goggles c) First aid kit d) Ergonomic chair 2. What does the acronym “OSHA” stand for? a) Occupational Safety and Health Administration b) Occupational Safety and Health Act c) Occupational Security and Hazard Assessment d) Occupational Safety and Hazard Association 3. What is the correct procedure in case of a fire emergency? a) Stay in your workplace until help arrives b) Call a friend to inform them about the fire c) Use the elevator to evacuate the building d) Follow designated escape routes and assemble at a safe location 4. What does the acronym “CPR” stand for? a) Cardiac Pulmonary Resuscitation b) Cardiovascular Physical Recovery c) Cardiopulmonary Rehabilitation d) Cardiopulmonary Resuscitation 5. What should you do if you encounter a chemical spill in the workplace? a) Pour water on the spill to dilute it b) Use a broom to sweep the spill away c) Immediately notify the appropriate personnel and follow spill response procedures d) Ignore it and continue working 6. What is the correct lifting technique to avoid back injuries? a) Bend your back while lifting b) Use your back muscles to lift heavy objects c) Keep your back straight and lift with your legs d) Twist your body while lifting 7. What does the “Hazard Communication” standard require employers to do? a) Provide employees with proper safety training b) Conduct regular fire drills c) Install safety signs in the workplace d) Label hazardous chemicals and provide Safety Data Sheets (SDS) 8. Which of the following is an example of an ergonomic workstation setup? a) Using a chair without proper back support b) Working on a desk with a cluttered workspace c) Adjusting the monitor height to eye level d) Working in a dimly lit room 9. What should you do if you witness a coworker experiencing an electric shock? a) Touch the person to help them regain consciousness b) Attempt to remove the person from the electrical source c) Call emergency services and wait for professional assistance d) Ignore the situation as it may resolve on its own 10. What is the purpose of a Safety Data Sheet (SDS)? a) To provide information on workplace safety regulations b) To provide emergency contact numbers c) To provide instructions for operating machinery d) To provide detailed information about hazardous chemicals 11. What is the primary cause of accidents in the workplace? a) Poor lighting conditions b) Lack of safety signage c) Human error d) Inadequate ventilation 12. What does the acronym “HSE” stand for in the context of health and safety? a) Health and Safety Executive b) Hazardous Substance Environment c) Health and Security Examination d) Harmful Substance Elimination 13. Which of the following is an example of a biological hazard? a) Toxic chemicals b) Electrical shock c) Pathogens d) Noise pollution 14. What is the purpose of a fire extinguisher? a) To provide emergency lighting during power outages b) To evacuate people during a fire emergency c) To control and extinguish small fires d) To prevent fires from starting 15. What does the acronym “PPE” stand for in the context of health and safety? a) Personal Protective Environment b) Protective Procedure Equipment c) Personal Physical Education d) Personal Protective Equipment Answer: d) Personal Protective Equipment 16. Which of the following is an example of a physical hazard? a) High noise levels b) Slippery floors c) Toxic fumes d) Ergonomic strain 17. What is the purpose of a safety sign with a skull and crossbones symbol? a) To indicate a toxic or hazardous substance b) To indicate the location of emergency exits c) To provide directions to designated smoking areas d) To indicate the presence of first aid supplies 18. What should you do if you witness someone experiencing a severe allergic reaction? a) Offer them food or water b) Apply pressure to the affected area c) Call emergency services and administer an epinephrine auto-injector if available d) Ignore the situation as it may resolve on its own 19. What does the acronym “MSDS” stand for in the context of health and safety? a) Materials Safety and Data Sheets b) Material Safety and Dangers Sheets c) Mandatory Safety and Data Sheets d) Material Safety Data Sheets 20. What is the purpose of conducting a risk assessment in the workplace? a) To identify potential hazards and assess their likelihood and severity b) To enforce strict regulations on employees c) To test emergency response plans d) To evaluate employee performance
