NETWORK
SOLUTION
Product Catalogue
2020
Index
About Us..................................................................................................................................... 5
Solution Overview ....................................................................................................................... 6
Product Overview........................................................................................................................ 7
ComFlex Pro DAS Series .............................................................................................................. 26
Active Conditioning Unit SE Version ........................................................................... 26
Active Conditioning Unit SE-2 Version ........................................................................ 28
3.5GHz Active Conditioning Unit SE Version .............................................................. 30
3.5GHz Active Conditioning Unit SE -02 Version ........................................................ 32
ComFlex Pro High Power .............................................................................................. 34
ComFlex Pro Low Power DAS....................................................................................... 37
ComFlex Pro Low Power DAS (850+2300) ................................................................... 40
ComFlex Pro Low Power DAS (850+2100+2300) ......................................................... 42
ComFlex Pro Low Power DAS (700+900+1800+2600)................................................. 45
ComFlex Pro Low Power DAS (900+1800+2100+2600)............................................... 47
ComFlex Pro Low Power DAS (E900+1800+2100+2600) ............................................ 49
ComFlex Pro Low Power DAS (850+1900+EAWS+2600) ............................................ 51
ComFlex Pro Low Power DAS (1900+EAWS+EAWS) ................................................. 53
ComFlex Pro Low Power DAS (1900+EAWS+2600+2600) .......................................... 55
ComFlex Pro Low Power DAS (700+1800+2100+2600)............................................... 57
ComFlex Pro Low Power DAS (850+1800+2100+2600)............................................... 59
ComFlex Pro Low Power DAS (700+1900+EAWS+2600) ............................................ 61
5G ComFlex Pro Low Power DAS (3.5GHz 200MHz) .................................................. 63
5G ComFlex Pro Low Power DAS (3.5GHz-L 300MHz) ............................................... 65
5G ComFlex Pro Low Power DAS (3.5GHz-U 300MHz) ............................................... 67
ComFlex DAS Series.................................................................................................................... 70
ComFlex CM 20W ........................................................................................................... 70
ComFlex AM .................................................................................................................... 73
RX Series Digital Band Selective Repeater ...................................................................................... 78
RX-0739 ........................................................................................................................... 80
RX-8039 ........................................................................................................................... 81
RX-8132 ........................................................................................................................... 82
RX-9139 ........................................................................................................................... 83
RX-1839 ........................................................................................................................... 84
RX-1939 ........................................................................................................................... 85
RX-2139 ........................................................................................................................... 86
Multi-band Digital Band Selective Repeater..................................................................................... 88
RX-7137 ........................................................................................................................... 91
RX-7539 ........................................................................................................................... 93
RX-7639 ........................................................................................................................... 95
RX-7839 ........................................................................................................................... 97
RX-5239 ........................................................................................................................... 99
Digital Channel Selective Repeater-LTE........................................................................................ 101
RX-0823 ......................................................................................................................... 103
RX-2623 ......................................................................................................................... 104
RX-9123 V5 .................................................................................................................... 106
RX-1823 III3 ................................................................................................................... 107
RX-2123 V5 .................................................................................................................... 108
mBDA Series Digital Band Selective Repeater ............................................................................... 109
mBDA-0733 .................................................................................................................... 111
mBDA-0833 .................................................................................................................... 112
mBDA-8133 .................................................................................................................... 113
mBDA-9133 .................................................................................................................... 114
mBDA-1833 .................................................................................................................... 115
mBDA-1933 .................................................................................................................... 116
mBDA-2033 .................................................................................................................... 117
mBDA-2133 .................................................................................................................... 118
mBDA-2633 .................................................................................................................... 119
Combiner for Dual Single Band mBDAs ....................................................................................... 120
mBDA Indoor Digital Band Selective Repeater .............................................................................. 122
mBDA-100 ..................................................................................................................... 122
mBDA-200S ................................................................................................................... 126
mBDA-300 ..................................................................................................................... 132
MP Series Digital Pico Repeater .................................................................................................. 138
MP-0832 ......................................................................................................................... 139
MP-9132 ......................................................................................................................... 140
MP-1832 ......................................................................................................................... 141
MP-2132 ......................................................................................................................... 142
Multi-band Digital Pico Repeater ................................................................................................. 143
MP-7S32......................................................................................................................... 144
MP-7U32 ........................................................................................................................ 146
MP-7V32......................................................................................................................... 147
MP-7532 ......................................................................................................................... 149
MP-7632 ......................................................................................................................... 151
MP-7832 ......................................................................................................................... 153
MP-5K32 ........................................................................................................................ 154
MP-5232 ......................................................................................................................... 155
MP-5632 ......................................................................................................................... 156
MP-5832 ......................................................................................................................... 157
CriticalPoint™ Public Safety Bi-Directional Amplifier ..................................................................... 159
RX-7W22 Class A PS 700/800MHz BDA ...................................................................... 159
RX-7W22 Class B PS 700/800MHz BDA ..................................................................... 162
RX-7W22 II2 5W Class A PS 700/800MHz BDA .......................................................... 165
RX-7W22 II2 5W Class B PS 700/800MHz BDA .......................................................... 167
RX-4122 PS UHF 400MHz BDA .................................................................................... 169
CriticalPoint™Public Safety Distributed Antenna System ............................................................... 171
RH-7W22 PS 700/800MHz DAS .................................................................................... 171
CriticalPoint™ Public Safety Backup Battery Unit .......................................................................... 174
PSU-9248 ....................................................................................................................... 174
Home Small Cell ........................................................................................................................ 176
HNB-35,A01 ................................................................................................................... 176
Enterprise Small Cell ................................................................................................................. 178
ENB-35 ........................................................................................................................... 178
Distributed Small Cell ................................................................................................................ 180
4G Distributed Small Cell ............................................................................................ 180
5G Distributed Small Cell ............................................................................................ 186
5G Indoor CPE .......................................................................................................................... 191
CP2600-IP, A30 .............................................................................................................. 191
Outdoor CPE ............................................................................................................................ 194
CP2600-OP, A10 ............................................................................................................ 194
CP2600-OP, A20 ............................................................................................................ 196
CP2600-OP, A21 ............................................................................................................ 198
5G Outdoor CPE .................................................................................................................. 200
CP2600-OP, A31 ............................................................................................................ 200
Coverage Management System ................................................................................................... 203
CMS V8.19.4 .................................................................................................................. 203
Contact Information ................................................................................................................... 206
About Us
Comba Telecom is a leading supplier of infrastructure and wireless enhancement solutions to mobile operators and enterprises to
enhance and extend their wireless communications networks. Established in 1997, and listed on the Hong Kong Stock Exchange
in 2003, it has grown to become a global supplier with its extensive distribution network and 80+ offices globally.
With seasoned team of research and development engineers and its state-of-the-art design tools and testing equipment, Comba
is able to provide its innovative patented designs and yet cost-effective products to the customers. After working with Operators /
Private enterprise networks seamless all over the word for more than 10 years, it is able to help the customers to roll out their full
scale range network quickly with the professional, customized, qualityguarantee product solutions.
Comba Network Solution Business Unit offers full range of wireless enhancement products, also Coverage Management System
(CMS) for wireless communication network systems, which include:
⚫
⚫
⚫
⚫
⚫
Active DAS
Wireless Repeater
Public Safety Repeater
Small Cells+ CPE
Coverage Management System
Comba is committed to quality consistency and environmental protection and is ISO9001 and ISO14001 certified. With its highly
efficiency production lines in China and strict process control system, Comba's manufacturing facility is able to deliver high volume
products with consistent quality.
Comba Manufacturing Facility in Guangzhou, China
Comba R&D Centre in Guangzhou, China
Solution Overview
Stadium/Large Venues
Applications
Scenic Areas
(Camouflaged Solutions)
In-Building Solutions
Subways & Tunnels
Wireless Backhaul Solutions
Base Station Solutions
Rural Area Solutions
Metro Area Solutions
1
1
© 2014 Comba Telecom. All Rights Reserved
Solution Overview
Comba’s wide range of indoor/outdoor repeater products provide total solutions for mobile network from covering blind sports to
implementing integrated coverage systems. The deployment of repeaters will effectively optimized network efficiency by
centralizing / redirecting traffic capacity and enhancing power budget.
⚫
Compliant to all major technologies including GSM, CDMA, WCDMA, LTE, Tetra and 5G NR.
⚫
Widely frequency range compliance e.g. 700MHz, 800MHz, 850MHz, 900MHz, 1800MHz, 1900MHz,AWS, 2100MHz,
2300MHz, 2600MHz and 3500MHz.
⚫
Support multi-modulations and multi-operators applications so that providing cost-effective solutions.
⚫
Support various output power from 0.01 W to 40 W.
⚫
Wide range of product line that can be used from high-rise building to underground railway for all kinds of applications.
Product Overview
ComFlex Pro Solution
ComFlex Pro High Power Solution
Highlight
⚫
Independent gain control for each input.
⚫
DAU supports 8 DRU, and DRU can cascade up to 32.
⚫
Support 7 bands per system.
⚫
20W Output power, 2x2 MIMO for each RFU.
⚫
Support 12.5Gb/s*2 data rate and maximum optical pathloss of 10dB.
ComFlex Pro Low Power Solution
Highlight
⚫
Independent gain control for each input.
⚫
Supports max.192 DPU with 1 DAU and 16DEUs
⚫
Support 4 bands 2*2 MIMO or 1 band 4*4 MIMO.
⚫
Integrated Omni antenna or external antennas.
⚫
Support 12.5Gb/s*2 data rate and maximum optical pathloss of 10dB.
ComFlex Pro Low Power Solution – 5G
ComFlex Pro Low Power Solution – 5G
•
•
•
•
•
A digitalized system to combine multiple services support band 3500MHz
Flexible distributed structure and expansion star connection and cascaded connection.
Integrated delay adjustment feature.
Built-in Cellular modem for remote controlling and monitoring.
4*4 MIMO Integrated Omni antennas.
ComFlex Solution
Comba DAS - ComFlex Series Overview
ComFlex AM
(ACU + Modular RU)
Highlight
⚫
Max. 100W input power from BTS.
⚫
-163dBc PIM.
⚫
WEB GUI, RF routing and diagnosis function.
⚫
Max. supports 32 RF input and 32 RUs connection.
⚫
Modular designed RU supports up to 8 bands, 20W per band without fan.
ComFlex CM
(Common MU + Modular RU)
Highlight
⚫
Max. supports 8 RF input and 16 RUs.
⚫
Modular design easy for upgrade and maintenance.
⚫
Supports multi-operator input and each adjustable gain.
⚫
Modular designed RU supports up to 8 bands, 20W per band without fan.
⚫
WEB GUI, automatic calibration and commissioning
Comba Wireless Repeater Series Overview
Wireless High Power RX Series
Band
Selective
Series
Channel Selective
Series
Highlight:
Highlight:

Support indoor/outdoor.

Support indoor / outdoor.

4 Sub bands, 90 dB gain.

4 Carriers / 2 Sub bands

5/10/20W output power.

Support ICS, 95 / 105dB gain.

Support Dual/Tri Bands.

10/20W output power.
Wireless Medium Power mBDA Series
Indoor mBDA Series
Outdoor mBDA Series
Highlight:
Highlight:

Support indoor.

Support outdoor.

4 Sub bands, 80 dB gain.

4 Sub bands, 80 dB gain.

0.5/1/2W output power.

0.5/1/2W output power.

Support up to 6 Bands.

Support Dual/Tri Bands.
Wireless Low Power Pico Series
Single band mPico
Multi-Band mPico
Highlight:
Highlight:

Support indoor.

Support indoor.

2 Sub bands, 75 dB gain.

2 Sub bands, 75 dB gain.

20dBm output power.

15/17dBm output power.

Support Single Band.

Support Dual/Tri Bands.

Central Freq./ band width settable.

Central Freq./ band width settable.
Public Safety Series Overview
Public Safety Series Overview
BDA
BBU
DAS
Highlight:
Highlight:
Highlight:

Support Class A and Class B

Support Class A and Class B

Support -48V 55AH or -48V 100AH

Support 32 channels for Class A

Support 32 channels for Class A

Support multi alarms

Support 0.5/2/5W output power

Support 2W output power

FCC/UL certificated

FCC/UL certificated

Support 32 remote units maximum

FCC/UL certificated
CMS Typical Network Management Diagram
Comba Base Station Series Overview
Indoor Base Station Solution
Comba Wireless Access Product
Highlight:

Support different scenarios application from hundreds to ten thousand square meters

Support different Single/Dual Band operation

Different output power level50mW/100mW/125mW and cascade networking
Comba User Equipment Overview
CPE
5G Indoor CPE
5G Outdoor CPE
E
Highlight:
Highlight:

5G NR Sub-6G n41/n77/n78n/79

5G NR Sub-6G n41/n77/n78/

4 x 4 MIMO

4 x 4 MIMO

Up to 2.5Gbps download speed

Up to 2.5Gbps download speed

Wi-Fi 802.11 a/b/g/n/ac, 4 x 4 MIMO

Up to 580Mbps download speed

ComFlex DAS Series Product Profile
DAS Series
Product
Photo
Name
Power
1W
ComFlex MU
(Max.
Input)
ComFlex
ComFlex
Plus ACU
100 W
(Max.
Input)
DAS
Bands
System
700/800E/850/900/1800
/1900/AWS/2100/2300/
GSM/UMTS/
2600
LTE/CDMA
Max. 8
700/800E/850/900/1800
1900/AWS/2100/2300/
GSM/UMTS/
2600
LTE/CDMA
Max. 32
700/800E/850/900/1800
Modular RU
10/20W
(Output)
/
1900/AWS/2100/2300/
2600
Max. 8
GSM/UMTS/
LTE/CDMA
ComFlex DAS Series Product Profile
DAS Series
Product
Photo
Name
ACU SE
ACU SE-2
DAU
Power
Bands
System
46dBm
700/800E/850/900/1800
GSM/UMTS/
(Max.
/1900/EAWS/2100/2300
LTE/CDMA
Input)
/2600/3500
NR
46dBm
700/800E/850/900/1800
GSM/UMTS/
(Max.
/1900/EAWS/2100/2300
LTE/CDMA
Input)
/2600/3500
NR
700/800E/850/900/1800
GSM/UMTS/
/1900/EAWS/2100/2300
LTE/CDMA/
/2600/3500
NR
700/800E/850/900/1800
GSM/UMTS/
/1900/EAWS/2100/2300
LTE/CDMA/
/2600/3500
NR
21dBm
700/800E/850/900/1800
GSM/UMTS/
23 dBm
/1900/EAWS/2100/2300
LTE/CDMA/
(Max.
/2600/3500
NR
/
ComFlex
Pro
Low Power
DEU
/
17dBm
Low Power
DPU
Output)
High Power
DRU
43dBm
700/800E/850/900/1800
(Max.
/1900/EAWS/2100/2300
Output)
/2600
GSM/UMTS/
LTE/CDMA
Wireless Enhancement Product Profile
Wireless Repeater High Power RX Series
Product
Photo
Name
Band
Selective
RX-xx39
RX Series
Channel
Selective
RX-xx23
RX Series
Power
Bands
5/10W/2
800/850/900/1800/1900/
0W
2100
5/10W/2
0W
E800/2600
System
GSM/
UMTS/
LTE
LTE
Channel
Selective
RX Series
RX-xx23
10
/20W
900/1800/2100
UMTS/
LTE
Wireless Enhancement Product Profile
Wireless Repeater Medium Power mBDA Series
Product
Photo
mBDA
Name
mBDA-xx33
Outdoor
Power
Bands
0.5/1/
800E/850/900/1800/1900
2W
AWS/2100/2600
mBDA
mBDA-RF-
0.5/1/
800E/850/900/1800/1900
Indoor
xx00
2W
AWS/2100/2600
System
GSM/
UMTS/
LTE/CDMA
GSM/
UMTS/
LTE/CDMA
Wireless Repeater Low Power Pico Series
Product
Photo
Name
Single
Bandm
MP-xx32
Pico
Multi
Band
mPico
MP-xx32
Power
Bands
15/17/20
800/850/900/1800/1900/
dBm
2100/2600
17/20
dBm
System
GSM/
UMTS/
LTE/CDMA
GSM/
800/900/1800/2100
UMTS/
LTE/CDMA
Public Safety Product Profile
Public Safety Series
Product
Photo
Name
Power
Bands
System
BDA
RX-7W22
0.5/2W
700/800
P25
BDA
RX-7W22
5W
700/800
P25
BDA
RX-4122
2W
UHF
P25
DAS
RH-7W22
2W
700/800
P25
BBU
PSU-9248
/
-48V/55AH
Or -48V/100AH
/
Wireless Access Product Profile
Small Cell Series
Product
Home
Small Cell
Enterprise Small
Photo
Name
HNB-35,A01
ENB-35L
Cell
Distributed Small
ENB-35
Cell
ENB-50
Power
50mw
x2
125mw x 2
125mw x 2
+
250mw x4
Bands
System
1800/2100/2300
LTE
2100/1800/2300/
2600
FDD 1800, 2100
NR 2600, 3500
LTE
LTE/ 5G NR
Wireless Access Product Profile
Product
Photo
Name
Network
Features
5G NR Sub-6G n41/n77/n78n/79
LTE low band:
B5 850/ B8 900/ B18 850/ B19 850/
5G Indoor CPE
CP2600-IP,
A30
B20 850/ B26 850/ B28 750
4+5G
LTE middle band:
B1 2100/ B3 1800/ B7 2600/ B32
1450/ B34 2000/ B38 2600/ B39
1900/ B40 2350/ B41 2600
LTE high band: B42 3500
5G NR Sub-6G n41/n77/n78/
LTE low band:
B5 850/ B8 900/ B18 850/ B19 850/
B20 850/ B26 850/ B28 750
5G Outdoor CPE
CP2600-OP,
A31
4+5G
LTE middle band:
B1 2100/ B3 1800/ B7 2600/ B32
1450/ B34 2000/ B38 2600/ B39
1900/ B40 2350/ B41 2600
LTE high band: B42 3500
4 x 4 MIMO
High Band: B42 3500/ B43 3700/ B48
3600
4G Outdoor CPE
CP2600-OP,
A21
LTE
3GPP Release 12 Cat 15
Up to 80MHz Carrier Aggregation
4 x 4 MIMO
Up to 580Mbps download speed
Middle Band: B2 1900/ B66 1900
4G Outdoor CPE
AP2600-OP,
A20
LTE
High Band: B42 3500/ B43 3700/
B48 3600
Up to 80MHz Carrier Aggregation
Product Application Scenario
Comba solutions are effective point-to-point/point-to-multipoint distributed antenna system that provides
effective coverage enhancement. The Comba product offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Product application Scenario 1: Mega (>10,000 m2)
Large Stadiums
Shopping Mall
Product Recommend:
Product Recommend:

DAS ComFlex Pro High/Low power

DAS ComFlex Pro High/Low power

DASComFlex AM

Small Cell - Distributed Small Cell
Railway / Metro
Air Port
Product Recommend:
Product Recommend:

DAS ComFlex Pro High power

DAS ComFlex Pro High power

DASComFlex AM

DASComFlex CM

DASComFlex AM
Product Application Scenario
Comba solutions are effective point-to-point/point-to-multipoint distributed antenna system that provides
effective coverage enhancement. The Comba product offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Product application Scenario 2: Large (5,000 – 10,000 m2)
Remote Village
Campus
Product Recommend:
Product Recommend:

Wireless RepeaterRX Series

DAS ComFlex Pro High/Low power

Base Station

Wireless RepeaterRX Series

Small Cell - Distributed Small Cell
Enterprise & Manufacture
Residential
Product Recommend:
Product Recommend:

DAS ComFlex Pro High/Low power

DAS ComFlex Pro High/Low power

Wireless RepeatermBDA Indoor Series

Small Cell- Enterprise Small Cell

DASComFlex CM

Small Cell - Distributed Small Cell
Product Application Scenario
Comba solutions are effective point-to-point/point-to-multipoint distributed antenna system that provides
effective coverage enhancement. The Comba product offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Product application Scenario 3: Medium (1,000 – 5,000 m2)
Parking & Underground
Tunnel
Product Recommend:
Product Recommend:
•
•
•
•
DAS ComFlex Pro High power
Wireless RepeaterRX Series
DAS ComFlex Pro High power
Wireless RepeaterRX Series
Supermarket
Park
Product Recommend:
Product Recommend:
•
•
•
•
Wireless RepeaterRX Series
Wireless RepeatermBDA Series
DAS ComFlex Pro High/low power
Small Cell - Distributed Small Cell
Product Application Scenario
Comba solutions are effective point-to-point/point-to-multipoint distributed antenna system that provides
effective coverage enhancement. The Comba product offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Product application Scenario 4: small (< 1,000 m2)
Restaurant
Retail Store
Product Recommend:
Product Recommend:
•
•
•
•
•
•
•
DAS ComFlex Pro low power
Wireless Repeater mBDA Series
Wireless RepeaterPico
Wireless RepeatermBDA Series
Wireless RepeaterPico
Small Cell – Enterprise Small Cell
Small Cell – Enterprise Small Cell
Small Office
Villa
Product Recommend:
Product Recommend:
•
•
•
•
•
•
•
DAS ComFlex Pro low power
Wireless RepeatermBDA Series
Wireless RepeaterPico
Small Cell – Enterprise Small Cell
Wireless RepeatermBDA Series
Wireless RepeaterPico
Small Cell – Home Small Cell
Product Application Scenario
Comba solutions are effective point-to-point/point-to-multipoint distributed antenna system that provides
effective coverage enhancement. The Comba product offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Product application Scenario 5: Special Scenario1
Public Safety
Bridge Coverage
Product Recommend:
Product Recommend:
•
Wireless Repeater Public Safety Series
•
Wireless Repeater mBDA Series
•
Small Cell – Enterprise Small Cell
•
Wireless Repeater Pico Series
Sail Coverage
Highway Coverage
Product Recommend:
Product Recommend:
•
Wireless RepeatermBDA Series
•
Wireless Repeater Pico
•
Wireless RepeatermBDA Series
•
Wireless Repeater Pico
•
Small Cell – Enterprise Small Cell
 ComFlex Pro DAS
Series
Page 25 of 210
ComFlex Pro DAS Series
Active Conditioning Unit SE Version
Features
•
•
•
•
•
•
•
Low PIM to BTS (≤-153dBc).
Supports 16 ACU cascade.
4 inputs for the same frequency band in one Chassis.
Duplex input from BTS and simplex output.
Max. DL input power of 46dBm.
Web based GUI.
Active ATT, input power detection and ALC protection for each RF module.
Functional Block Diagram
Specifications
Supported Bands &Technologies
Bands
Technologies
700MHz (APAC)
Frequency Range (MHz)
Downlink (DL)
Uplink (UL)
LTE
758-803
703-748
800E MHz
LTE
791-821
832-862
850MHz
GSM/WCDMA/CDMA/LTE
869-894
824-849
900MHz
GSM/WCDMA/HSPA/LTE
925-960
880-915
1800MHz
GSM/WCDMA/HSPA/LTE
1805-1880
1710-1785
1900MHz
LTE
1930-1995
1850-1915
EAWS
LTE
2110-2200
1710-1780
2100MHz
WCDMA/HSPA/LTE
2110-2170
1920-1980
2300MHz
LTE
2300-2400
2300-2400
2600MHz
LTE
2620-2690
2500-2570
Electrical
Max. Downlink Input Power
Insert Loss
Downlink
Uplink
dBm
46
43
dB
43
ATT Adjustable Range(1dB step)
dB
0-25
PIM (43dBm x 2)
dBc
-153
Ripple
dB
3
Return Loss
dB
TX/RX:≤ -20; TX, RX: ≤ -15
Page 26 of 210
Specifications
Mechanical
Dimensions, H x W x D
mm
88 x 485x 400
Weight (approx.)
kg
15
Power Supply
VAC
100-240
Power Consumption (approx.)
W
15
RF Connectors
Operating Temperature
Input: 4.3-10, Output: QMA
o
C
0 to +45
Operating Humidity
≤ 85%
Ingress Protection
IP30
Enclosure Cooling
Fan
Installation Type
19” Rack
Page 27 of 210
Active Conditioning Unit SE-2 Version
Features
•
•
•
•
•
•
•
Low PIM to BTS (≤-153dBc).
Supports 16 ACU cascade.
Support 2 groups of inputs for the same frequency band
in one Chassis.
Each group support 2 BTS input, total 4 inputs in one ACU SE
Duplex input from BTS and simplex output.
Max. DL input power of 46dBm.
Active ATT, input power detection and ALC protection for each RF module.
Functional Block Diagram
Specifications
Supported Bands &Technologies
Bands
Technologies
700MHz (APAC)
Frequency Range (MHz)
Downlink (DL)
Uplink (UL)
LTE
758-803
703-748
800E MHz
LTE
791-821
832-862
850MHz
GSM/WCDMA/CDMA/LTE
869-894
824-849
900MHz
GSM/WCDMA/HSPA/LTE
925-960
880-915
1800MHz
GSM/WCDMA/HSPA/LTE
1805-1880
1710-1785
1900MHz
LTE
1930-1995
1850-1915
EAWS
LTE
2110-2200
1710-1780
2100MHz
WCDMA/HSPA/LTE
2110-2170
1920-1980
2300MHz
LTE
2300-2400
2300-2400
2600MHz
LTE
2620-2690
2500-2570
Page 28 of 210
Specifications
Electrical
Max. Downlink Input Power
Insert Loss
Downlink
Uplink
dBm
46
43
dB
43
ATT Adjustable Range(1dB step)
dB
0-25
PIM (43dBm x 2)
dBc
-153
Ripple
dB
3
Return Loss
dB
TX/RX:≤ -20; TX, RX: ≤ -15
Dimensions, H x W x D
mm
88 x 485x 400
Weight (approx.)
kg
15
Power Supply
VAC
100-240
Power Consumption (approx.)
W
15
Mechanical
RF Connectors
Operating Temperature
Input: 4.3-10, Output: QMA
oC
0 to +45
Operating Humidity
≤ 85%
Ingress Protection
IP30
Enclosure Cooling
Fan
Installation Type
19” Rack
Page 29 of 210
PRELIMINARY
3.5GHz Active Conditioning Unit SE Version
Features
•
•
•
•
•
•
2*4 inputs for the same frequency band in one Chassis.
One 3.5GHz ACU SE can support 2*2 MIMO
Duplex input from BTS and simplex output.
Max. DL input power of 46dBm.
Web based GUI.
Active ATT, input power detection and ALC protection for each RF module.
Functional Block Diagram
Specifications
Supported Bands &Technologies
Bands
Technologies
3500MHz
5G
Frequency Range (MHz)
3300-3700
Page 30 of 210
Specifications
Electrical
Max. Downlink Input Power
Insert Loss
Downlink
Uplink
dBm
46
43
dB
43
ATT Adjustable Range(1dB step)
dB
Ripple
dB
0-25
3
Return Loss
dB
TX/RX:≤ -15; TX, RX: ≤ -15
Dimensions, H x W x D
mm
88 x 485x 400
Weight (approx.)
kg
15
Power Supply
VAC
100-240
Power Consumption (approx.)
W
25
Mechanical
RF Connectors
Operating Temperature
Input: 4.3-10, Output: QMA
oC
0 to +45
Operating Humidity
≤ 85%
Ingress Protection
IP30
Enclosure Cooling
Fan
Installation Type
19” Rack
Page 31 of 210
PRELIMINARY
3.5GHz Active Conditioning Unit SE -02 Version
Features
•
•
•
•
•
•
•
One 3.5GHz ACU SE can support 4*4 MIMO
Support 2 groups of inputs in one Chassis.
Each group support 2 BTS input, total 4x2 inputs in one ACU SE
Duplex input from BTS and simplex output.
Max. DL input power of 46dBm.
Web based GUI.
Active ATT, input power detection and ALC protection for each RF module.
Functional Block Diagram
Specifications
Supported Bands &Technologies
Bands
Technologies
3500MHz
5G
Frequency Range (MHz)
3300-3700
Page 32 of 210
Specifications
Electrical
Max. Downlink Input Power
Insert Loss
Downlink
Uplink
dBm
46
43
dB
43
ATT Adjustable Range(1dB step)
dB
Ripple
dB
0-25
3
Return Loss
dB
TX/RX:≤ -15; TX, RX: ≤ -15
Dimensions, H x W x D
mm
88 x 485x 400
Weight (approx.)
kg
15
Power Supply
VAC
100-240
Power Consumption (approx.)
W
25
Mechanical
RF Connectors
Operating Temperature
Input: 4.3-10, Output: QMA
oC
0 to +45
Operating Humidity
≤ 85%
Ingress Protection
IP30
Enclosure Cooling
Fan
Installation Type
19” Rack
Page 33 of 210
ComFlex Pro High Power
Features
•
•
•
•
•
•
•
•
•
Modularized Remote Unit supports field upgrade and independent gain control.
Small size with low power consumption and easy installation.
Access Unit supports 8 Remote Unit directly, and Remote Unit can cascade up to 32.
Support 7 bands per Optical Distributed Unit.
20W Output power for each band.
Support 12.5 GB/s*2 data rate and maximum optical pathloss of 10dB.
Full operation bandwidth system supports multi-operator application.
Support all major technologies GSM, WCDMA and LTE and MIMO.
Web based GUI for intelligent commissioning and configuration.
System Block Diagram
Page 34 of 210
Specifications
Optical
700MHz, 800E MHz, 850MHz, 900MHz, 1800MHz,
1900MHz,EAWS, 2100MHz, 2300MHz, 2600MHz
System
Optical Fiber
Single Mode
Optical Wavelength
nm
1270, 1330
Optical Output Power
dBm
-6 to -3
Data Rate
Gb/s
12.5*2
Transmission Distance
km
10 (Default) or 20
Optical By-pass Loss
dB
≤ 0.5
Fiber Connectors
LC/PC
Electrical
SISO/MIMO
Frequency Range
Uplink
Downlink
MHz
700MHz
800E MHz
850MHz
900MHz
MIMO
MIMO
MIMO
MIMO
MIMO
703-748
832-862
824-849
880-915
1710-1785
758-803
791-821
869-894
925-960
1805-1880
45
30
25
35
75
37-43
37-43
Operating Bandwidth
MHz
Instantaneous Bandwidth
MHz
Downlink Output Power
dBm
Uplink Maximum Gain
dB
50
Downlink Maximum Gain
ATT Adjustable Range
(1dB step)
Pass Band Ripple (p-p)
dB
50 @20W
dB
DAU: 0-30, DRU: 0-20
dB
Spurious Emission
Uplink Noise Figure at
Maximum Gain
System Delay
1800MHz
Full Band
37-43
37-43
≤4
3GPP TS
36.106
37-43
≤4
3GPP TS
36.106
≤4
3GPP TS
25.106
≤4
3GPP TS
25.106
≤4
3GPP TS 25.106
3GPP TS 36.106
≤5
dB
sec
≤8
≤ 1.5
VSWR
Electrical
1900MHz
SISO/MIMO
Frequency Range
Uplink
Downlink
MHz
EAWS
2100MHz
2300MHz
MIMO
MIMO
MIMO
MIMO
1850-1915
1710-1780
1920-1980
1930-1995
2110-2180
2110-2170
65
70
60
37-43
37-43
Operating Bandwidth
MHz
Instantaneous Bandwidth
MHz
Downlink Output Power
dBm
Uplink Maximum Gain
dB
50
Downlink Maximum Gain
ATT Adjustable Range
(1dB step)
Pass Band Ripple (p-p)
dB
50 @20W
Spurious Emission
Uplink Noise Figure at
Maximum Gain
System Delay
MIMO
2500-2570
2620-2690
100
70
37-43
37-43
≤4
3GPP TS
36.106
≤4
2300MHz: 80
dB
dB
2300-2400
2600MHz
37-43
DAU: 0-30, DRU: 0-20
≤4
3GPP TS
36.106
≤4
3GPP TS
36.106
≤4
3GPP TS
25.106
≤5
dB
sec
≤8
≤ 1.5
VSWR
Page 35 of 210
3GPP TS 36.106
Specifications
Mechanical---DAU
Dimensions, H x W x D
mm
88 x 485 x 400
Weight (approx.)
kg
13
Power Supply
AC
100-240/50-60Hz
Power Consumption
W
130
RF Connectors
Cluster RF connector, simplex
Fiber Connectors
LC/PC
Operating Temperature
oC
-10 to +45
≤ 85%
Operating Humidity
IP Level
IP30
Enclosure Cooling
Convection
Installation Type
19” Rack
Mechanical---DRU
Dimensions,
HxWxD
Weight (approx.)
ODU
Per RFU
ODU
Per RFU
370 x 80 x 355
mm
500 x 80 x 355
12
kg
18
Power Supply
VAC
100-240/50-60Hz
Power Consumption (approx.)
W
220(per band)
RF Connectors
4.3-10, duplex per band
Fiber Connectors
Operating Temperature
LC/PC
o
C
-40 to +55
≤ 95%
Operating Humidity
IP Level
IP65
Enclosure Cooling
Convection
Installation Type
Wall/ Pole
Page 36 of 210
ComFlex Pro Low Power DAS
Features
•
•
•
•
•
•
•
•
A digitalized system to combine multiple services.
Flexible distributed structure and expansion which supports maximum 192 Distributed Piont Units
(DPUs) with single DAU and 16 DEUs with combination of star and cascaded connection.
Hybrid-fiber for DEU&DPU connection, remote power supply supported. (Optional)
Integrated delay adjustment feature.
Built-in LTE modem for remote controlling and monitoring.
Meet3GPP standards.
DPU can support 4 bands 2*2 MIMO or 1 band 4*4 MIMO and 2 bands 2*2 MIMO.
Two types of DPU: DPU with integrated Omni antenna, DPU with individual single band ports for
external antennas.
Functional Block Diagram
Page 37 of 210
Specifications
System
700MHz, 800E MHz, 850MHz, 900MHz, 1800MHz,
1900MHz, EAWS, 2100MHz, 2300MHz,2600MHz
Single Mode
System
Optical Fiber
Optical Wavelength
nm
1270/1330
Transmission Distance
km
DAU-DEU: 10km; DEU-DEU:2km; DEU-DPU:0.3km
Data Rate
Gb/s
12.5
Electrical
700
800E
850
900
1800
Operating Frequency, Uplink
MHz
703-748
832-862
824-849
880-915
1710-1785
Operating Frequency, Downlink
MHz
758-803
791-821
869-894
925-960
1805-1880
Instantaneous Bandwidth
MHz
Max 45
Max 30
Max 25
Max 35
75
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
700/ 800/ 850/ 900: 17, 1800: 21
Maximum System Gain
Attenuation Adjustment Range
(1dB step)
Pass Band Ripple, p-p
dB
700/ 800/ 850/ 900: 24, 1800: 28
dB
DAU: 0-30, DPU: 0-20
dB
3
Uplink Noise Figure
dB
10
System Group Delay
sec
8
Spurious Emission
Absolute Maximum RF Input
Power
Antenna
dBm
3GPP TS 36.106
Impedance

dBm
Uplink: -10dBm; Downlink: +10dBm;
Integrated Antenna / External Antenna (8 ports)
Electrical
50
1900
EAWS
2100
2300
Operating Frequency, Uplink
MHz
1850-1915
1710-1780
1920-1980
Operating Frequency, Downlink
MHz
1930-1995
2110-2180
2110-2170
Instantaneous Bandwidth
MHz
Max 65
Max 70
Max 60
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
21
Maximum System Gain
Attenuation Adjustment Range
(1dB step)
Pass Band Ripple, p-p
dB
28
dB
DAU: 0-30, DPU: 0-20
dB
3
Uplink Noise Figure
dB
10
System Group Delay
sec
8
Spurious Emission
Absolute Maximum RF Input
Power
Antenna
dBm
3GPP TS 36.106
dBm
Uplink: -10dBm; Downlink: +10dBm;
Impedance

2300-2400
Max 80
Integrated Antenna or external antenna (8 ports)
50
Page 38 of 210
2600 FDD
2500-2570
2620-2690
Max 70
Specifications
Power, Mechanical & Environmental
DAU
Dimensions,
H x W x D (approx.)
DEU
88 x 485 x 400
mm
88 x 485 x 400
DPU
62 x250x 250
DAU
Weight (approx.)
DEU
13
Kg
18
DPU
DAU
Power Supply
DEU
DPU
3
DC48 /AC100~240V
VAC
AC100~240V
VDC
Supplied by DEU/DC48V
DAU
Power Consumption
(approx.)
RF Connectors
Fiber Connectors
Operating
Temperature
DEU
130
W
70
DPU
65
DAU
Cluster RF connector, simplex
DEU
/
DPU
SMA-Female (External antenna version)
DAU
LC/PC
DEU
LC/PC
DPU
LC/PC
DAU
-10~+45
DEU
C
-10~+45
DPU
-10~+45
DAU
IP Level
DEU
IP30
DPU
Page 39 of 210
ComFlex Pro Low Power DAS (850+2300)
Features
•
•
•
•
•
•
•
•
A digitalized system to combine multiple services support band 850MHzand 2300MHz.
Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
Integrated delay adjustment feature.
Support Gigabit Ethernet.
Built-in LTE modem for remote controlling and monitoring.
Meet 3GPP standards.
2*2 MIMO (850/2300).
Integrated Omni antenna.
Functional Block Diagram
Page 40 of 210
Specifications
System
System
850/2300 band 2T2R
Optical Fiber
Single Mode
Optical Wavelength
nm
1270/1330
Maximum Communication Distance
km
DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate
Gb/s
12.5
Fiber Connectors
LC/PC
Electrical
850
(CDMA2000)
850
(WCDMA)
2300
870-880
877.5-882.5
2300-2390
Max. 10
Max. 5
Max. 80
Operating Frequency, Uplink
MHz
Operating Frequency, Downlink
MHz
Operating Bandwidth Per Sub-band
MHz
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
850: 17, 2300: 21
Maximum System Gain
Attenuation Adjustment Range
(1dB step)
Pass Band Ripple, p-p
dB
850: 24, 2300: 28
dB
DAU: 0-30, DPU: 0-20
dB
3
Uplink Noise Figure
dB
6
System Group Delay
sec
8
Spurious Emission
dBm
3GPP TS 36.106
Absolute Maximum RF Input Power
dBm
Uplink: -10dBm; Downlink: +10dBm;
Antenna
Integrated Antenna

Impedance
50
Power, Mechanical & Environmental
DAU
Dimensions,
H x W x D (approx.)
DEU
88 x 485 x 400
mm
88 x 485 x 400
DPU
62 x250x 250
DAU
Weight (approx.)
Power Supply
DEU
13
kg
8
DPU
3
DAU
DC48 /AC100~240V
VAC
DEU
DPU
AC100~240V
VDC
supplied by DEU/DC48V
DAU
Power Consumption
(approx.)
RF Connectors
DEU
130
W
70
DPU
65
DAU
Cluster RF connector, simplex
DEU
/
DPU
/
DAU
Operating Temperature
DEU
-10~+45
C
-10~+45
DPU
-10~+45
DAU
IP Level
IP30
DEU
DPU
Page 41 of 210
ComFlex Pro Low Power DAS (850+2100+2300)
Features
•
•
•
•
•
•
•
•
A digitalized system to combine multiple services support band 850MHz, 2100MHz, and 2300MHz.
Hybrid-fiber for DEU&DPU connection, remote power supply supported. (Optional)
Integrated delay adjustment feature.
Support Gigabit Ethernet.
Built-in LTE modem for remote controlling and monitoring.
Meet 3GPP standards.
2*2 MIMO (850/2100/2300).
Two types of DPU: DPU with integrated Omni antenna, DPU with individual single band ports for
external antennas.
Functional Block Diagram
Page 42 of 210
Specifications
System
System
850/2100/2300 band 2T2R
Optical Fiber
Single Mode
Optical Wavelength
nm
1270/1330
Maximum Communication Distance
km
DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate
Gb/s
12.5
Fiber Connectors
LC/PC
Electrical
850
2100
2300
Operating Frequency, Uplink
MHz
825-845
1920-1980
2302-2400
Operating Frequency, Downlink
MHz
870-890
2110-2170
2302-2400
Operating Bandwidth Per Sub-band
MHz
Max 20
Max 60
Max 80
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
850: 17; 2100/2300: 21
Maximum System Gain
dB
850: 24; 2100/2300: 28
Attenuation Adjustment Range(1dB step)
dB
DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p
dB
3
Uplink Noise Figure
dB
10
System Group Delay
sec
8
Spurious Emission
dBm
3GPP TS 36.106
Absolute Maximum RF Input Power
dBm
Uplink: -10dBm; Downlink: +10dBm;
Integrated Antenna or external antenna(6 ports)
Antenna

Impedance
50
Power, Mechanical & Environmental
DAU
Dimensions,
H x W x D (approx.)
DEU
88 x 485 x 400
mm
88 x 485 x 400
DPU
62 x250x 250
DAU
Weight (approx.)
DEU
13
kg
8
DPU
DAU
Power Supply
3
DC48 /AC100~240V
VAC
DEU
DPU
AC100~240V
VDC
supplied by DEU/DC48V
DAU
Power Consumption
(approx.)
RF Connectors
Operating Temperature
DEU
130
W
70
DPU
65
DAU
Cluster RF connector, simplex
DEU
/
DPU
6* SMA-Female (External antenna version)
DAU
-10~+45
DEU
C
-10~+45
DPU
-10~+45
DAU
IP Level
IP30
DEU
DPU
Page 43 of 210
Specifications
Mechanical---DAU
Dimensions, H x W x D
mm
88 x 485 x 400
Weight (approx.)
kg
13
Power Supply
AC
100-240/50-60Hz
Power Consumption
W
130
RF Connectors
Cluster RF connector, simplex
Fiber Connectors
LC/PC
Operating Temperature
oC
-10 to +45
≤ 85%
Operating Humidity
IP Level
IP30
Enclosure Cooling
Convection
Installation Type
19” Rack
Mechanical---DRU
Dimensions,
HxWxD
Weight (approx.)
ODU
Per RFU
ODU
Per RFU
370 x 80 x 355
mm
500 x 80 x 355
12
kg
15
Power Supply
VAC
100-240/50-60Hz
Power Consumption (approx.)
W
220(per band)
RF Connectors
4.3-10, duplex per band
Fiber Connectors
Operating Temperature
LC/PC
o
C
-40 to +55
≤ 95%
Operating Humidity
IP Level
IP65
Enclosure Cooling
Convection
Installation Type
Wall/ Pole
Page 44 of 210
ComFlex Pro Low Power DAS (700+900+1800+2600)
Features
•
•
•
•
•
•
•
•
A digitalized system to combine multiple services support band 700MHz, 900MHz, 1800MHz, and
2600MHz.
Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
Integrated delay adjustment feature.
Support Gigabit Ethernet.
Built-in LTE modem for remote controlling and monitoring.
Meet 3GPP standards.
2*2 MIMO (700/900/1800/2600).
Two types of DPU: DPU with integrated Omni antenna, DPU with individual single band ports for
external antennas.
Functional Block Diagram
Page 45 of 210
Specifications
System
System
700/900/1800/2600 band 2T2R
Optical Fiber
Single Mode
Optical Wavelength
nm
1270/1330
Maximum Communication Distance
km
DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate
Gb/s
12.5
Fiber Connectors
LC/PC
Electrical
700
900
1800
2600
Operating Frequency, Uplink
MHz
703-748
890-915
1710-1785
2500-2570
Operating Frequency, Downlink
MHz
758-803
935-960
1805-1880
2620-2690
Operating Bandwidth Per Sub-band
MHz
Max 45
Max 25
Max 75
Max 70
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
700/900: 17; 1800/2600: 21
Maximum System Gain
dB
700/900: 24; 1800/2600: 28
Attenuation Adjustment Range
(1dB step)
dB
DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p
dB
3
Uplink Noise Figure
dB
10
System Group Delay
sec
8
Spurious Emission
dBm
3GPP TS 36.106
Absolute Maximum RF Input Power
dBm
Uplink: -10dBm; Downlink: +10dBm;
Antenna
Integrated Antenna or external antenna(8 ports)

Impedance
50
Power, Mechanical & Environmental
DAU
Dimensions,
H x W x D (approx.)
DEU
88 x 485 x 400
mm
88 x 485 x 400
DPU
62 x250x 250
DAU
Weight (approx.)
Power Supply
DEU
13
kg
8
DPU
3
DAU
DC48 /AC100~240V
VAC
DEU
DPU
AC100~240V
VDC
supplied by DEU/DC48V
DAU
Power Consumption
(approx.)
RF Connectors
DEU
130
W
70
DPU
65
DAU
Cluster RF connector, simplex
DEU
/
DPU
8* SMA-Female (External antenna version)
DAU
Operating Temperature
DEU
-10~+45
C
-10~+45
DPU
-10~+45
DAU
IP Level
IP30
DEU
DPU
Page 46 of 210
ComFlex Pro Low Power DAS (900+1800+2100+2600)
Features
•
•
•
•
•
•
•
•
A digitalized system to combine multiple services support band 900MHz, 1800MHz, 2100MHz and
2600MHz.
Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
Integrated delay adjustment feature.
Support Gigabit Ethernet.
Built-in LTE modem for remote controlling and monitoring.
Meet 3GPP standards.
2*2 MIMO (900/1800/2100/2600).
Integrated Omni antenna.
Functional Block Diagram
Page 47 of 210
Specifications
System
System
900/1800/2100/2600 band 2T2R
Optical Fiber
Single Mode
Optical Wavelength
nm
1270/1330
Maximum Communication Distance
km
DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate
Gb/s
12.5
Fiber Connectors
LC/PC
Electrical
900
1800
2100
2600
1710-1785
1920-1980
2500-2570
Operating Frequency, UL
MHz
885-915
Operating Frequency, DL
MHz
930-960
1805-1880
2110-2170
2620-2690
Operating Bandwidth Per Sub-band
MHz
Max 30
Max 75
Max 60
Max 70
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
900: 17, 1800/2100/2600: 21
Maximum System Gain, Downlink
dB
900: 24, 1800/2100/2600: 28
Maximum System Gain, Uplink
dB
40
Attenuation Adjustment Range(1dB step)
dB
DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p
dB
3
Uplink Noise Figure
dB
10
System Group Delay
sec
8
Spurious Emission
dBm
3GPP TS 36.106
Antenna Type
Integrated Antenna
Antenna Gain
dB
900: 2, 1800/2100/2600: 3
Impedance

50
ACU SE Return Loss
dB
TX/RX:≤ -20; TX, RX: ≤ -15
Power, Mechanical & Environmental
DAU
Dimensions,
H x W x D (approx.)
DEU
88 x 485 x 400
mm
88 x 485 x 400
DPU
62 x250x 250
DAU
Weight (approx.)
DEU
13
kg
8
DPU
DAU
Power Supply
3
DC48 /AC100~240V
VAC
DEU
DPU
AC100~240V
VDC
supplied by DEU/DC48V
DAU
Power Consumption
(approx.)
RF Connectors
Operating Temperature
DEU
130
W
70
DPU
65
DAU
Cluster RF connector, simplex
DEU
/
DPU
/
DAU
-10~+45
DEU
C
-10~+45
DPU
-10~+45
DAU
IP Level
IP30
DEU
DPU
Page 48 of 210
ComFlex Pro Low Power DAS (E900+1800+2100+2600)
Features
•
•
•
•
•
•
•
•
A digitalized system to combine multiple services support band E900MHz, 1800MHz, 2100MHz and
2600MHz.
Hybrid-fiber for DEU&DPU connection, remote power supply supported. (Optional)
Integrated delay adjustment feature.
Support Gigabit Ethernet.
Built-in LTE modem for remote controlling and monitoring.
Meet 3GPP standards.
2*2 MIMO (E900/1800/2100/2600).
Integrated Omni antenna.
Functional Block Diagram
Page 49 of 210
Specifications
System
System
E900/1800/2100/2600 band 2T2R
Optical Fiber
Single Mode
Optical Wavelength
nm
1270/1330
Maximum Communication Distance
km
DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate
Gb/s
12.5
Fiber Connectors
LC/PC
Electrical
E900
1800
2100
2600
Operating Frequency, UL
MHz
880-915
1710-1785
1920-1980
2500-2570
Operating Frequency, DL
MHz
925-960
1805-1880
2110-2170
2620-2690
Operating Bandwidth Per Sub-band
MHz
Max 35
Max 75
Max 60
Max 70
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
E900: 17, 1800/2100/2600: 21
Maximum System Gain, Downlink
dB
E900: 24, 1800/2100/2600: 28
Maximum System Gain, Uplink
dB
40
Attenuation Adjustment Range(1dB step)
dB
DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p
dB
3
Uplink Noise Figure
dB
10
System Group Delay
sec
8
Spurious Emission
dBm
3GPP TS 36.106
Antenna Type
Integrated Antenna
Antenna Gain
dB
E900: 2, 1800/2100/2600: 3
Impedance

50
ACU SE Return Loss
dB
TX/RX:≤ -20; TX, RX: ≤ -15
Power, Mechanical & Environmental
DAU
Dimensions,
H x W x D (approx.)
Weight (approx.)
Power Supply
DEU
88 x 485 x 400
mm
88 x 485 x 400
DPU
62 x250x 250
DAU
13
DEU
kg
8
DPU
3
DAU
DC48 /AC100~240V
DEU
DPU
VAC
AC100~240V
VDC
supplied by DEU/DC48V
DAU
Power Consumption
(approx.)
RF Connectors
Operating Temperature
DEU
130
W
70
DPU
65
DAU
Cluster RF connector, simplex
DEU
/
DPU
/
DAU
-10~+45
DEU
C
-10~+45
DPU
-10~+45
DAU
IP Level
DEU
IP30
DPU
Page 50 of 210
ComFlex Pro Low Power DAS (850+1900+EAWS+2600)
Features
•
•
•
•
•
•
•
•
A digitalized system to combine multiple services support band 850MHz, 1900MHz, EAWS and
2600MHz.
Hybrid-fiber for DEU&DPU connection, remote power supply supported. (Optional)
Integrated delay adjustment feature.
Support Gigabit Ethernet.
Built-in LTE modem for remote controlling and monitoring.
Meet 3GPP standards.
2*2 MIMO (850/1900/EAWS/2600).
Two types of DPU: DPU with integrated Omni antenna, DPU with individual single band ports for
external antennas.
Functional Block Diagram
Page 51 of 210
Specifications
System
System
850/1900/EAWS/2600 band 2T2R
Optical Fiber
Single Mode
Optical Wavelength
nm
1270/1330
Maximum Communication Distance
km
DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate
Gb/s
12.5
Fiber Connectors
LC/PC
Electrical
850
1900
EAWS
2600
Operating Frequency, Uplink
Operating
Frequency, Downlink
Operating Bandwidth Per Sub-band
MHz
824-849
1850-1910
1710-1780
2500-2570
MHz
869-894
1930-1990
2110-2200
2620-2690
MHz
Max 25
Max 60
Max 70
Max 70
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
850/ 900: 17, 1900/EAWS/2600: 21
Maximum System Gain
Attenuation Adjustment Range
(1dB step)
Pass Band Ripple, p-p
dB
850: 24, 1900/EAWS/2600: 28
dB
DAU: 0-30, DPU: 0-20
dB
3
Uplink Noise Figure
dB
10
System Group Delay
sec
8
Spurious Emission
dBm
3GPP TS 36.106
Absolute Maximum RF Input Power
dBm
Antenna
Uplink: -10dBm; Downlink: +10dBm;
Integrated Antenna or external antenna(8 ports)

Impedance
50
Power, Mechanical & Environmental
DAU
Dimensions,
H x W x D (approx.)
DEU
88 x 485 x 400
mm
88 x 485 x 400
DPU
62 x250x 250
DAU
Weight (approx.)
DEU
13
kg
8
DPU
DAU
Power Supply
3
DC48 /AC100~240V
VAC
DEU
DPU
AC100~240V
VDC
supplied by DEU/DC48V
DAU
Power Consumption
(approx.)
RF Connectors
Operating Temperature
DEU
130
W
70
DPU
65
DAU
Cluster RF connector, simplex
DEU
/
DPU
8* SMA-Female (External antenna version)
DAU
-10~+45
DEU
C
-10~+45
DPU
-10~+45
DAU
IP Level
IP30
DEU
DPU
Page 52 of 210
ComFlex Pro Low Power DAS (1900+EAWS+EAWS)
Features
•
•
•
•
•
•
•
•
A digitalized system to combine multiple services support band 1900MHz and EAWS.
Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
Integrated delay adjustment feature.
Support Gigabit Ethernet.
Built-in LTE modem for remote controlling and monitoring.
Meet 3GPP standards.
2*2 MIMO (1900), 4*4 MIMO (EAWS)
Integrated Omni antenna.
Functional Block Diagram
Page 53 of 210
Specifications
System
System
1900 2T2R, EAWS 4T4R
Optical Fiber
Single Mode
Optical Wavelength
nm
1270/1330
Maximum Communication Distance
km
DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate
Gb/s
12.5
Fiber Connectors
LC/PC
Electrical
1900
EAWS
Operating Frequency, Uplink
MHz
1850-1910
1710-1780
Operating Frequency, Downlink
MHz
1930-1990
2110-2200
Instantaneous Bandwidth
MHz
Max 60
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
21
Maximum System Gain
dB
28
dB
DAU: 0-30, DPU: 0-20
dB
3
Uplink Noise Figure
dB
10
System Group Delay
sec
8
Spurious Emission
dBm
3GPP TS 36.106
Absolute Maximum RF Input Power
dBm
Uplink: -10dBm; Downlink: +10dBm;
Attenuation Adjustment Range
(1dB step)
Pass Band Ripple, p-p
Antenna
Max 70
Integrated Antenna

Impedance
50
Power, Mechanical & Environmental
DAU
Dimensions,
H x W x D (approx.)
DEU
88 x 485 x 400
mm
88 x 485 x 400
DPU
62 x250x 250
DAU
Weight (approx.)
Power Supply
DEU
13
kg
8
DPU
3
DAU
DC48 /AC100~240V
VAC
DEU
DPU
AC100~240V
VDC
supplied by DEU/DC48V
DAU
Power Consumption
(approx.)
RF Connectors
DEU
130
W
70
DPU
65
DAU
Cluster RF connector, simplex
DEU
/
DPU
/
DAU
Operating Temperature
DEU
-10~+45
C
-10~+45
DPU
-10~+45
DAU
IP Level
IP30
DEU
DPU
Page 54 of 210
ComFlex Pro Low Power DAS (1900+EAWS+2600+2600)
Features
•
•
•
•
•
•
•
•
A digitalized system to combine multiple services support band 1900MHz, EAWS and 2600MHz.
Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
Integrated delay adjustment feature.
Support Gigabit Ethernet.
Built-in LTE modem for remote controlling and monitoring.
Meet 3GPP standards.
2*2 MIMO (1900/EAWS), 4*4 MIMO (2600)
Integrated Omni antenna.
Functional Block Diagram
Page 55 of 210
Specifications
System
System
1900MHz, EAWS 2T2R, 2600MHz 4T4R
Optical Fiber
Single Mode
Optical Wavelength
nm
1270/1330
Maximum Communication Distance
km
DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate
Gb/s
12.5
Fiber Connectors
LC/PC
Electrical
1900
EAWS
2600
Operating Frequency, Uplink
MHz
1850-1910
1710-1780
2500-2570
Operating Frequency, Downlink
MHz
1930-1990
2110-2200
2620-2690
Instantaneous Bandwidth
MHz
Max 60
Max 45
Max 70
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
21
Maximum System Gain
dB
28
dB
DAU: 0-30, DPU: 0-20
dB
3
Uplink Noise Figure
dB
10
System Group Delay
sec
8
Spurious Emission
dBm
3GPP TS 36.106
Absolute Maximum RF Input Power
dBm
Uplink: -10dBm; Downlink: +10dBm;
Attenuation Adjustment Range
(1dB step)
Pass Band Ripple, p-p
Antenna
Integrated Antenna

Impedance
50
Power, Mechanical & Environmental
DAU
Dimensions,
H x W x D (approx.)
DEU
88 x 485 x 400
mm
88 x 485 x 400
DPU
62 x250x 250
DAU
Weight (approx.)
DEU
13
kg
8
DPU
DAU
Power Supply
3
DC48 /AC100~240V
VAC
DEU
DPU
AC100~240V
VDC
supplied by DEU/DC48V
DAU
Power Consumption
(approx.)
RF Connectors
DEU
130
W
70
DPU
65
DAU
Cluster RF connector, simplex
DEU
/
DPU
/
DAU
Operating Temperature
DEU
-10~+45
C
-10~+45
DPU
-10~+45
DAU
IP Level
IP30
DEU
DPU
Page 56 of 210
ComFlex Pro Low Power DAS (700+1800+2100+2600)
Features
•
•
•
•
•
•
•
•
A digitalized system to combine multiple services support band 700MHz, 1800MHz, 2100MHz and
2600MHz.
Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
Integrated delay adjustment feature.
Support Gigabit Ethernet.
Built-in LTE modem for remote controlling and monitoring.
Meet 3GPP standards.
2*2 MIMO (700/1800/2100/2600).
Integrated Omni antenna.
Functional Block Diagram
Page 57 of 210
Specifications
System
System
700MHz, 1800MHz, 2100MHz and 2600MHz 2T2R
Optical Fiber
Single Mode
Optical Wavelength
nm
1270/1330
Maximum Communication Distance
km
DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate
Gb/s
12.5
Fiber Connectors
LC/PC
Electrical
700
1800
2100
2600
Operating Frequency, Uplink
MHz
703-748
1710-1785
1920-1980
2500-2570
Operating Frequency, Downlink
MHz
758-803
1805-1880
2110-2170
2620-2690
Instantaneous Bandwidth
MHz
Max 45
Max 75
Max 60
Max 70
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
700: 17, 1800/2100/2600: 21
Maximum System Gain
dB
700: 24, 1800/2100/2600: 28
dB
DAU: 0-30, DPU: 0-20
dB
3
Uplink Noise Figure
dB
10
System Group Delay
sec
8
Spurious Emission
dBm
3GPP TS 36.106
Absolute Maximum RF Input Power
dBm
Uplink: -10dBm; Downlink: +10dBm;
Attenuation Adjustment Range
(1dB step)
Pass Band Ripple, p-p
Antenna
Integrated Antenna

Impedance
50
Power, Mechanical & Environmental
DAU
Dimensions,
H x W x D (approx.)
DEU
88 x 485 x 400
mm
88 x 485 x 400
DPU
62 x250x 250
DAU
Weight (approx.)
Power Supply
DEU
13
kg
8
DPU
3
DAU
DC48 /AC100~240V
VAC
DEU
DPU
AC100~240V
VDC
supplied by DEU/DC48V
DAU
Power Consumption
(approx.)
RF Connectors
DEU
130
W
70
DPU
65
DAU
Cluster RF connector, simplex
DEU
/
DPU
/
DAU
Operating Temperature
DEU
-10~+45
C
-10~+45
DPU
-10~+45
DAU
IP Level
IP30
DEU
DPU
Page 58 of 210
ComFlex Pro Low Power DAS (850+1800+2100+2600)
Features
•
•
•
•
•
•
•
•
A digitalized system to combine multiple services support band 850MHz, 1800MHz, 2100MHz and
2600MHz.
Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
Integrated delay adjustment feature.
Support Gigabit Ethernet.
Built-in LTE modem for remote controlling and monitoring.
Meet 3GPP standards.
2*2 MIMO (850/1800/2100/2600).
Integrated Omni antenna.
Functional Block Diagram
Page 59 of 210
Specifications
System
System
850MHz, 1800MHz, 2100MHz and 2600MHz 2T2R
Optical Fiber
Single Mode
Optical Wavelength
nm
1270/1330
Maximum Communication Distance
km
DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate
Gb/s
12.5
Fiber Connectors
LC/PC
Electrical
850
1800
2100
2600
Operating Frequency, Uplink
MHz
824-849
1710-1785
1920-1980
2500-2570
Operating Frequency, Downlink
MHz
869-894
1805-1880
2110-2170
2620-2690
Instantaneous Bandwidth
MHz
Max 25
Max 75
Max 60
Max 70
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
850: 17, 1800/2100/2600: 21
Maximum System Gain
Attenuation Adjustment Range
(1dB step)
Pass Band Ripple, p-p
dB
850: 24, 1800/2100/2600: 28
dB
DAU: 0-30, DPU: 0-20
dB
3
Uplink Noise Figure
dB
10
System Group Delay
sec
8
Spurious Emission
dBm
3GPP TS 36.106
Absolute Maximum RF Input Power
dBm
Uplink: -10dBm; Downlink: +10dBm;
Antenna
Integrated Antenna

Impedance
50
Power, Mechanical & Environmental
DAU
Dimensions,
H x W x D (approx.)
Weight (approx.)
Power Supply
DEU
88 x 485 x 400
mm
88 x 485 x 400
DPU
62 x250x 250
DAU
13
DEU
kg
8
DPU
3
DAU
DC48 /AC100~240V
VAC
DEU
DPU
AC100~240V
VDC
supplied by DEU/DC48V
DAU
Power Consumption
(approx.)
RF Connectors
Operating Temperature
DEU
130
W
70
DPU
65
DAU
Cluster RF connector, simplex
DEU
/
DPU
/
DAU
-10~+45
DEU
C
-10~+45
DPU
-10~+45
DAU
IP Level
IP30
DEU
DPU
Page 60 of 210
ComFlex Pro Low Power DAS (700+1900+EAWS+2600)
Features
•
•
•
•
•
•
•
•
A digitalized system to combine multiple services support band 700MHz, 1900MHz, EAWS and
2600MHz.
Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
Integrated delay adjustment feature.
Support Gigabit Ethernet.
Built-in LTE modem for remote controlling and monitoring.
Meet 3GPP standards.
2*2 MIMO (700/1900/EAWS/2600).
Integrated Omni antenna.
Functional Block Diagram
Page 61 of 210
Specifications
System
System
700MHz, 1900MHz, EAWS and 2600MHz 2T2R
Optical Fiber
Single Mode
Optical Wavelength
nm
1270/1330
Maximum Communication Distance
km
DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate
Gb/s
12.5
Fiber Connectors
LC/PC
Electrical
700
1900
EAWS
2600
Operating Frequency, Uplink
MHz
703-748
1850-1910
1710-1780
2500-2570
Operating Frequency, Downlink
MHz
758-803
1930-1990
2110-2200
2620-2690
Instantaneous Bandwidth
MHz
Max 45
Max 60
Max 70
Max 70
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
700: 17, 1900/EAWS/2600: 21
Maximum System Gain
Attenuation Adjustment Range
(1dB step)
Pass Band Ripple, p-p
dB
700: 24, 1900/EAWS/2600: 28
dB
DAU: 0-30, DPU: 0-20
dB
3
Uplink Noise Figure
dB
10
System Group Delay
sec
8
Spurious Emission
dBm
3GPP TS 36.106
Absolute Maximum RF Input Power
dBm
Uplink: -10dBm; Downlink: +10dBm;
Antenna
Integrated Antenna

Impedance
50
Power, Mechanical & Environmental
DAU
Dimensions,
H x W x D (approx.)
DEU
88 x 485 x 400
mm
88 x 485 x 400
DPU
62 x250x 250
DAU
Weight (approx.)
Power Supply
DEU
13
kg
8
DPU
3
DAU
DC48 /AC100~240V
DEU
DPU
VAC
AC100~240V
VDC
supplied by DEU/DC48V
DAU
Power Consumption
(approx.)
RF Connectors
Operating Temperature
DEU
130
W
70
DPU
65
DAU
Cluster RF connector, simplex
DEU
/
DPU
/
DAU
-10~+45
DEU
C
-10~+45
DPU
-10~+45
DAU
IP Level
IP30
DEU
DPU
Page 62 of 210
PRELIMINARY
5G ComFlex Pro Low Power DAS (3.5GHz 200MHz)
Features
•
•
•
•
•
•
•
A digitalized system to combine multiple services support band 3400MHz~3600MHz.
Flexible distributed structure and expansion star connection and cascaded connection.
Hybrid-fiber for DEU&DPU connection, remote power supply supported. (Optional)
Integrated delay adjustment feature.
Built-in Cellular modem for remote controlling and monitoring.
Meet 3GPP NR standards.
4*4 MIMO integrated Omni antennas.
Functional Block Diagram
Page 63 of 210
Specifications
System
System
N78 band,
Optical Fiber
4T4R
Single Mode
Optical Wavelength
nm
1270/1330
Maximum Communication Distance
km
DAU-DEU: 10km; DEU-DEU:10km; DEU-DPU:0.3km
Data Rate
Gb/s
14.2
Fiber Connectors
LC/PC
Electrical
N78
Operating Frequency, Uplink
MHz
3400-3600
Operating Frequency, Downlink
MHz
3400-3600
Instantaneous Bandwidth
MHz
Max 200MHz for 4x4 MIMO
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
23dBm
Maximum System Gain
Attenuation Adjustment Range
(1dB step)
Pass Band Ripple, p-p
dB
30
dB
DAU: 0-30, DPU: 0-20
dB
3
Uplink Noise Figure
dB
8
System Group Delay
sec
3
Spurious Emission
dBm
3GPP TS 38.104
Absolute Maximum RF Input Power
dBm
Uplink: -10dBm; Downlink: +10dBm;
Antenna
Integrated Antenna

Impedance
50
Power, Mechanical & Environmental
DAU
Dimensions,
H x W x D (approx.)
DEU
88 x 485 x 400
mm
88 x 485 x 400
DPU
62 x 230 x 230 (approx.)
DAU
Weight (approx.)
Power Supply
DEU
13
kg
18
DPU
3.0
DAU
DC 48 /AC 100~240V
DEU
DPU
VAC
AC100~240V
VDC
Supplied by DEU/DC 48V
DAU
Power Consumption
(approx.)
RF Connectors
Operating Temperature
DEU
130
W
65
DPU
60
DAU
Cluster RF connector, simplex
DEU
/
DPU
/
DAU
-10~+45
DEU
C
-10~+45
DPU
-10~+45
DAU
IP Level
IP30
DEU
DPU
Page 64 of 210
PRELIMINARY
5G ComFlex Pro Low Power DAS (3.5GHz-L 300MHz)
Features
•
•
•
•
•
•
•
A digitalized system to combine multiple services support band 3300MHz~3600MHz.
Flexible distributed structure and expansion star connection and cascaded connection.
Hybrid-fiber for DEU&DPU connection, remote power supply supported. (Optional)
Integrated delay adjustment feature.
Built-in Cellular modem for remote controlling and monitoring.
Meet 3GPP NR standards.
4*4 MIMO integrated Omni antennas.
Functional Block Diagram
Page 65 of 210
Specifications
System
System
N78 band,
Optical Fiber
4T4R
Single Mode
Optical Wavelength
nm
1270/1330
Maximum Communication Distance
km
DAU-DEU: 10km; DEU-DEU:10km; DEU-DPU:0.3km
Data Rate
Gb/s
14.2
Fiber Connectors
LC/PC
Electrical
N78
Operating Frequency, Uplink
MHz
3300-3600
Operating Frequency, Downlink
MHz
3300-3600
Instantaneous Bandwidth
MHz
Max 300MHz for 4x4 MIMO
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
23dBm
Maximum System Gain
Attenuation Adjustment Range
(1dB step)
Pass Band Ripple, p-p
dB
30
dB
DAU: 0-30, DPU: 0-20
dB
3
Uplink Noise Figure
dB
8
System Group Delay
sec
3
Spurious Emission
dBm
3GPP TS 38.104
Absolute Maximum RF Input Power
dBm
Uplink: -10dBm; Downlink: +10dBm;
Antenna
Integrated Antenna

Impedance
50
Power, Mechanical & Environmental
DAU
Dimensions,
H x W x D (approx.)
DEU
88 x 485 x 400
mm
88 x 485 x 400
DPU
62 x 230 x 230 (approx.)
DAU
Weight (approx.)
Power Supply
DEU
13
kg
18
DPU
3.0
DAU
DC 48 /AC 100~240V
DEU
DPU
VAC
AC100~240V
VDC
Supplied by DEU/DC 48V
DAU
Power Consumption
(approx.)
RF Connectors
Operating Temperature
DEU
130
W
65
DPU
60
DAU
Cluster RF connector, simplex
DEU
/
DPU
/
DAU
-10~+45
DEU
C
-10~+45
DPU
-10~+45
DAU
IP Level
IP30
DEU
DPU
Page 66 of 210
PRELIMINARY
5G ComFlex Pro Low Power DAS (3.5GHz-U 300MHz)
Features
•
•
•
•
•
•
•
A digitalized system to combine multiple services support band 3400MHz~3700MHz.
Flexible distributed structure and expansion star connection and cascaded connection.
Hybrid-fiber for DEU&DPU connection, remote power supply supported. (Optional)
Integrated delay adjustment feature.
Built-in Cellular modem for remote controlling and monitoring.
Meet 3GPP NR standards.
4*4 MIMO integrated Omni antennas.
Functional Block Diagram
Page 67 of 210
Specifications
System
System
N78 band,
Optical Fiber
4T4R
Single Mode
Optical Wavelength
nm
1270/1330
Maximum Communication Distance
km
DAU-DEU: 10km; DEU-DEU:10km; DEU-DPU:0.3km
Data Rate
Gb/s
14.2
Fiber Connectors
LC/PC
Electrical
N78
Operating Frequency, Uplink
MHz
3400-3700
Operating Frequency, Downlink
MHz
3400-3700
Instantaneous Bandwidth
MHz
Max 300MHz for 4x4 MIMO
Total Output Power, Uplink
dBm
-5
Total Output Power, Downlink
dBm
23dBm
Maximum System Gain
Attenuation Adjustment Range
(1dB step)
Pass Band Ripple, p-p
dB
30
dB
DAU: 0-30, DPU: 0-20
dB
3
Uplink Noise Figure
dB
8
System Group Delay
sec
3
Spurious Emission
dBm
3GPP TS 38.104
Absolute Maximum RF Input Power
dBm
Uplink: -10dBm; Downlink: +10dBm;
Antenna
Integrated Antenna

Impedance
50
Power, Mechanical & Environmental
DAU
Dimensions,
H x W x D (approx.)
DEU
88 x 485 x 400
mm
88 x 485 x 400
DPU
62 x 230 x 230 (approx.)
DAU
Weight (approx.)
Power Supply
DEU
13
kg
18
DPU
3.0
DAU
DC 48 /AC 100~240V
DEU
DPU
VAC
AC100~240V
VDC
Supplied by DEU/DC 48V
DAU
Power Consumption
(approx.)
RF Connectors
Operating Temperature
DEU
130
W
65
DPU
60
DAU
Cluster RF connector, simplex
DEU
/
DPU
/
DAU
-10~+45
DEU
C
-10~+45
DPU
-10~+45
DAU
IP Level
IP30
DEU
DPU
Page 68 of 210
 ComFlex DAS Series
Page 69 of 210
ComFlex DAS Series
ComFlex CM 20W
Features
•
•
•
•
•
•
•
•
•
Modularized Master Unit and Remote Unit support field upgrade and independent gain control.
RF module supports both simplex/duplex optional and adjusts gain for each module.
Full operation bandwidth system supports multi-operator application.
Supports all major technologies GSM, CDMA, WCDMA, and LTE.
Comply with 3GPP and supports LTE MIMO.
Optical link auto gain control.
Web based GUI for intelligent commissioning and configuration.
Supports FOU extension in Master Unit.
RU supports PSU\PA\optical backup (conditional) and black optional.
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and high power Remote Unit (RU). The MU includes the
Chassis, Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design,
it can support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a
compact form factor for easy installation, and its modular design is easy for upgrading and maintenance,
which supports up to 8 bands including MIMO frequency.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
Functional Block Diagram
SISO
BTS
RU 1
RU 8
MU
…
MIMO
BTS
RU 1
RU 4
MU
…
Page 70 of 210
Specifications
Optical
700MHz, 800MHz, 850MHz, 1800MHz, 1900MHz,
2100MHz,AWS,2600MHz
System
Optical Fiber
Single Mode
Optical Wavelength
Optical
Power
Output
nm
1310, 1550 + WDM
Master Unit
-4 to 2
dBm
Remote Unit
3.0to5.0
Optical Return Loss
dB
>50
Max. Optical Loss
dB
6.5
Optical Automatic Gain Control
dB
6.5
Fiber Connectors
MU:SC/APC; RU:FC/APC
Maximum Remote Unit per Master
Unit
8 (16 with FOU extension) in SISO; 4 (8 with FOU extension) in MIMO
Electrical
Uplink Frequency
Range
Downlink
Frequency Range
Operating
Bandwidth
Uplink
Output
Power
Downlink Output
Power
Uplink Maximum
gain
Downlink
Maximum gain
ATT
Adjustable
Range(1dB step)
Pass Band Ripple
(p-p)
700
MHz
800
MHz*
850
MHz*
1800
MHz**
1900
MHz**
2100
MHz**
AWS**
2600
MHz
703-748
806-824
824-849
1710-17
85
1805-18
80
1850-19
10
1930-19
90
1920-19
80
2110-21
70
1710-175
5
2110-215
5
2500-25
70
2620-26
90
758-803
851-869
869-894
MHz
45
18
25
75
60
60
45
70
dBm
-30
-30
-30
-30
-30
-30
-30
-30
dBm
43
43
43
43
43
43
43
43
MHz
dB
30
dB
35
dB
MU: 0-40, RU: 0-30
dB
≤6
3GPP
TS
36.106
Spurious
emission
≤5
3GPP
TS
25.106
≤5
≤6
≤6
≤6
≤6
≤6
3GPP
TS
25.106
3GPP
TS
25.106
3GPP
TS
36.106
3GPP
TS
36.106
3GPP
TS
25.106
3GPP TS
25.106
3GPP TS
36.106
3GPP
TS
36.106
Uplink
Noise
Figure
at
Maximum Gain
dB
≤5
System Delay
sec
≤2
≤ 1.5
VSWR
Max
Downlink
Input Power
dBm
30
* Note: When 800MHz and 850MHz used together the gain will be 3dB decrease in 800MHz DL
and 850MHz UL, and 800MHz output power will be 40dBm and 850MHz NF will be 8dB.
** Note: 1800MHz, 1900MHz, 2100MHz and AWS band will not be used together due to
frequency interference. Suggest 1800+2100 and 1900+AWS band.
Page 71 of 210
Specifications
Mechanical---MU
Chassis
178 x 482 x 360
Fiber Optical Unit
Dimensions, H x W x D
Per RF Unit
37 x 185 x 299
mm
Power Supply Unit
140 x 63 x 400
Chassis
12
Fiber Optical Unit
Weight (approx.)
Per RF Unit
103 x 46 x 259
2
kg
Power Supply Unit
1
2.5
Power Supply
VAC
100-240/50-60Hz
Power Consumption (approx.)
W
85
RF Connectors
N-Female
Fiber Connectors
SC/APC
Operating Temperature
°C
0 to +40
Operating Humidity
≤ 85%
Ingress protection
IP30
Enclosure Cooling
Convection
Installation Type
19” Rack
Mechanical---RU
CMU
Dimensions, H x W x D
Per RF Unit
528 x 298 x 251
mm
Mounting Rack
602 x 820 x 80
CMU
Weight (approx.)
Per RF Unit
25
kg
Mounting Rack
Power Supply
AC110/220V
Power Consumption (approx.)
528 x 290 x 152
15
8
VAC
100-240/50-60Hz
W
1200 (8 bands)
RF Connectors
N-Female
Fiber Connectors
FC/APC
Operating Temperature
°C
-40 to +55
Operating Humidity
≤ 95%
Ingress protection
IP65
Enclosure Cooling
Convection
Installation Type
Wall
Page 72 of 210
ComFlex Series Distributed Antenna System
ComFlex AM
Features
•
•
•
•
•
•
•
•
•
•
•
Low PIM to BTS (≤ -160dBc).
ACU Cascade supported to share the monitoring.
Max. DL input power of 100W per RFU of ACU.
Modularized ACU and Remote Unit support field upgrade and
independent gain control.
ACU supports 8 operators duplex input.
Full operation bandwidth system supports multi-operator application.
Supports all major technologies GSM, CDMA, WCDMA and LTE.
Web based GUI for intelligent commissioning and configuration.
Supports OCU extension
Remote Unit supports PSU/PA/optical backup (conditional) and black optional.
Product Description
The ComFlex series Distributed Antenna System is an RF over fibre solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Active Conditioning Unit (ACU), Optical control Unit (OCU), Combiner and
Remote Unit (RU). The ACU includes the Chassis, Power Supply Unit (PSU) and RF Unit (RFU). With a
modular design, it can support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is
designed with a compact form factor for easy installation, and its modular design is easy for upgrading
and maintenance, supports up to 8 bands including MIMO frequency.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
Functional Block Diagram
SISO
ACU
BTS
RU 1
RU 8
…
Combiner
OCU
MIMO
ACU
BTS
RU4
RU1
…
Combiner
OCU
Page 73 of 210
Specifications
Optical
700MHz, 800MHz, 850MHz, 900MHz, 1800MHz, EAWS, 1900MHz,
2100MHz, 2600MHz and MIMO (max. 8 bands)
System
Optical Fiber
Single Mode
Optical Wavelength
Optical
Power
Output
nm
OCU
1310, 1550 + WDM
-4 to -2
dBm
Remote Unit
3.0 to5.0
Optical Return Loss
dB
> 50
Max. Optical Loss
dB
6.5
Optical Automatic Gain Control
dB
6.5
Fiber Connectors
OCU:SC/APC,RU:FC/APC
Maximum Remote Unit to OCU
8 (16 with FOU extension) in SISO, 4 (8 with FOU extension) in MIMO
Electrical
700MHz
Uplink Frequency Range
Downlink
Range
MHz
Frequency
700APAC
800MHz
850MHz
900MHz
1800MHz
703-748
806-824
824-849
880-915
1710-1785
758-803
851-869
869-894
925-960
1805-1880
698-716/
776-787
728-746/
746-757
Operating Bandwidth
MHz
18/11
45
18
25
35
75
Downlink Output Power
dBm
43
43
43
43
43
43
Uplink Maximum gain
dB
-3
-3
-3
-3
-3
-3
dB
-3
-3
-3
-3
-3
-3
Downlink Maximum gain
(@ 46dBm input)
ATT Adjustable Range
(1dB step)
dB
Pass Band Ripple (p-p)
ACU: 0-70, RU: 0-30
≤5
dB
Spurious emission
Uplink Noise Figure at
Maximum Gain
dB
System Delay
sec
≤6
≤5
≤5
≤5
≤6
3GPP TS
36.106
3GPP TS
36.106
3GPP TS
36.106
3GPP TS
25.106
3GPP TS
36.106
3GPP TS
25.106
3GPP TS
36.106
≤5
≤5
≤5
≤5
≤5
≤5
≤2
≤ 1.5
VSWR
Max. Downlink Input
Power per RFU of ACU
dBm
50
Electrical
Uplink Frequency Range
EAWS
1900MHz
2100MHz
2600MHz
1710-1780
1850-1915
1920-1980
2500-257
2110-2180
1930-1995
2110-2170
2620-2690
MHz
Downlink Frequency Range
Operating Bandwidth
MHz
70
65
60
70
Downlink Output Power
dBm
43
43
43
43
Uplink Maximum gain
dB
-3
-3
-3
-3
dB
-3
-3
-3
-3
Downlink Maximum gain (@
46dBm input)
ATT Adjustable Range
(1dB step)
Pass Band Ripple (p-p)
dB
dB
Spurious emission
Uplink Noise
Maximum Gain
Figure
at
System Delay
dB
ACU: 0-70, RU: 0-30
≤6
≤6
≤6
≤6
3GPP TS 25.106
3GPP TS 25.106
3GPP TS 36.106
3GPP TS 25.106
3GPP TS 36.106
≤5
≤5
≤5
≤5
sec
≤2
≤ 1.5
VSWR
Max. Downlink Input Power
per RFU of ACU
dBm
50
Page 74 of 210
Specifications
Mechanical---ACU
Dimensions, H x W x D
mm
220 x 482.5 x 450
Rack
15.5
Per RFU
Weight (approx.)
4.5 (max. support 8 RF units)
kg
PSU
2
MCU
1.5
VAC
100-240/50-60Hz
Power Supply
Power Consumption (approx.)
VDC
-48/47-63Hz
W
180 (with 8 RFUs)
RF Connectors
Operating Temperature
Input: Din, duplex; Output:QMA, simplex
°C
0 to +45
Operating Humidity
≤ 85%
Ingress Protection
IP30
Enclosure Cooling
Fan
Installation Type
19” Rack
Mechanical---Combiner
Dimensions, H x W x D
mm
44 x 485x 450
Weight (approx.)
kg
6.5
RF Connectors
Operating Temperature
QMA-Female, simplex
°C
0 to +45
Operating Humidity
≤ 85%
Ingress Protection
IP30
Enclosure Cooling
Convection
Installation Type
19” Rack
Page 75 of 210
Specifications
Mechanical---OCU
Dimensions, H x W x D
mm
44 x 485x 450
Rack
Weight (approx.)
5
kg
Per FOU
2 (max. support 2FOUs)
Power Supply
DC
+28V (from ACU) @ 0.7A
Power Consumption (approx.)
W
30
RF Connectors
QMA-Female, simplex
Fiber Connectors
SC/APC
Operating Temperature
°C
0 to +45
Operating Humidity
≤ 85%
Ingress Protection
IP30
Enclosure Cooling
Convection
Installation Type
19” Rack
Mechanical---RU
CMU
Dimensions, H x W x D
Per RF Unit
528 x 251 x 298
mm
528 x 152 x 290(max. support 4 RF units)
Mounting Rack
602 x 820 x 30
CMU
Weight (approx.)
Per RF Unit
30
20 (max. support 4 RF units)
kg
Mounting Rack
8
Power Supply
VAC
100-240/50-60Hz
Power Consumption (approx.)
W
150 Per band (max. 1200)
RF Connectors
N-Female, duplex
Fiber Connectors
FC/APC
Operating Temperature
°C
-40 to +55
Operating Humidity
≤ 95%
Ingress protection
IP65
Enclosure Cooling
Convection
Installation Type
Wall
Page 76 of 210
 RX Series Digital Band
Selective Repeater
Page 77 of 210
RX Series Digital Band Selective Repeater
Features
•
•
•
•
•
•
•
•
Up to 4 pass band segments with independent ON/OFF for maximum flexibility.
5W/10W total output power.
Integrated wireless modem for remote configuration, monitoring and control.
Offline isolation detection for easy commissioning.
Internal backup battery keeps the alarm unit running for up to two hours after
power failure.
Compatible to Comba generic OMT and CMS platform.
Designed for all weather outdoor installation – waterproof, damp-proof and
omni-sealed (IP65).
Can be configured as Master Unit (MU) or Slave Unit (SU) in a
centralizedmonitoring system.
FunctionalBlock Diagram
PA1
LNA1
Donor
Ant
DT
Mobile
Ant
Integrated Frequency
selective module
MT
Mobile
BTS
LNA2
PA2
OMT
Computer with
Data card
Wireless
Modem
Modem
Alarm
Indicator
Main Control Unit
Power
Supply
Li-ion
BATT
OMC
OMT
External
Power
Operation andMaintenance
•
•
•
•
Using a direct connection to a PC by RJ45, installation and commissioning of the system is
accomplished by the OMT. Using the integrated wireless modem, the equipment parameters can be
monitored and controlled remotely.
Controlled equipment parameters include: RF Switch, Carrier Switch, Isolation Detection Switch,
Channel No. Range, ATT, Over-Temp Threshold, DL Input Power Threshold, DL Output Power
Threshold and Alarm Report Enable.
Monitored equipment parameters include: Alarms (LNA, PA, PLL unlock, Power Down, PSU Fault,
Door Open, DL Input power Overload, DL Output Power Low, Over Temp, VSWR), DL Output Power
and DL Input Power.
The system has been developed to take advantage of advanced network operation, where the CMS
(optional) provides an effective solution for central monitoring of a group of Comba products.
Page 78 of 210
Outline Drawing
164
300
RUN
ALM
430
MODEM
AC 100V-240V
50/60Hz
AC OUT
RS-485
DT
EXT_ALM
MODEM ANT
MT
Page 79 of 210
LTE700Digital Band Selective Repeater
RX-0739
Specifications
Electrical
5W
10W
Frequency Range, Uplink
MHz
703-733 or 718-748
FrequencyRange, Downlink
MHz
758-788 or 773-803
Operating Bandwidth Per Sub-band
MHz
3-20
Number of Sub-bands
4
Total Output Power, Uplink
dBm
Total Output Power, Downlink
dBm
23
Maximum System Gain
dB
90
GainAdjustmentRange (1dB step)
dB
0-30
Pass Band Ripple, p-p
dB
5
Uplink Noise Figure
dB
5
System Group Delay
sec
6.5
37
40
Out of Band Gain
ACRR
EVM
Compliance with3GPP 36.106
Out of Band Spectrum Emissions
Input Intermodulation
Output Intermodulation
Absolute Maximum RF Input Power
dBm
-10
 1.5
Input VSWR

50
Dimensions, H x W x D
mm
430 x 300 x 164
Weight(approx.)
kg
18
Power Supply
VAC
Power Consumption(approx.)
W
Power Up Waiting Time(approx.)
sec
180
MCU Battery Backup Time(approx.)
hr
2
Impedance
Mechanical
100-240/47-63Hz
160
170
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
-33 to +55
 95%
Operating Humidity
Environmental Class
MTBF
IP65
≥ 50,000
hrs
Note: Typical specifications at room temperature
Page 80 of 210
800MHz Tetra Band Selective Repeater
RX-8039
Specifications
Electrical
2W
5W
Frequency Range, Uplink
MHz
806-824
FrequencyRange, Downlink
MHz
851-869
Operating Bandwidth Per Sub-band
MHz
0.2-18
Number of Sub-bands
10W
4
Total Output Power, Uplink
dBm
30
Total Output Power, Downlink
dBm
Maximum System Gain
dB
90
GainAdjustmentRange (1dB step)
dB
0-30
Pass Band Ripple, p-p
dB
5
33
37
Uplink Noise Figure
dB
5
System Group Delay
sec
6.5
Inter modulation
dBc
≥40
±600kHz
dBc
≥45
±1MHz
dBc
≥ 60
9KHz to 1GHz
dBm
 -36
1GHz to 12.75GHz
dBm
 -30
dBm
-10
Out-of-Band Suppression
Spurious
Absolute Maximum RF Input Power
 1.5
Input VSWR

50
Dimensions, H x W x D
mm
430 x 300 x 164
Weight(approx.)
kg
18
Power Supply
VAC
100-240/47-63Hz
Power Consumption(approx.)
W
Power Up Waiting Time(approx.)
sec
MCU Battery Backup Time(approx.)
hr
Impedance
40
Mechanical
120
140
180
2
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF
hr
160
≥ 50,000
Note: Typical specifications at room temperature
Page 81 of 210
850MHz Digital Band Selective Repeater
RX-8132
Specifications
Electrical
5W
10W
Operating Frequency, Uplink
MHz
824-849
Operation Frequency, Downlink
MHz
869-894
Operating Bandwidth Per Sub-band
MHz
0.2-24.8
Number of Sub-bands
2
Total Output Power, Uplink
dBm
33
Total Output Power, Downlink
dBm
Maximum System Gain
dB
90
Attenuation Adjustment Range (1dB step)
dB
0-30
Pass Band Ripple, p-p
dB
≤5
Uplink Noise Figure
dB
5
System Group Delay
sec
≤ 6.5
37
Offset ≥ 600KHz
Out-of-Band Rejection
Offset ≥ 1MHz
40
≥ 45
dBc
Intermodulation @ GSM
dBc
Absolute Maximum RF input power
dBm
≥ 60
≥ 40
-10
≤ 1.5
Input VSWR

50
Dimensions, H x W x D
mm/in
430x300x164/16.9x11.8x6.5
Weight (approx.)
kg/lb
18/39.7
Power Supply
VAC
100-240/47-63Hz
Power Consume
W
Power Up Waiting Time (approx.)
sec
180
MCU Battery Backup Time (approx.)
hr
2
Impedance
Mechanical
Enclosure Cooling
160
Convection
RF Connectors
Operating Temperature
140
N-Female
C
-33 to +50
Operating Humidity
 95%
Environmental Class
IP65
MTBF
hrs
> 50,000
Note: Typical specification at room temperature
.
Page 82 of 210
900MHz Digital Band Selective Repeater
RX-9139
Specifications
Electrical
5W
10W
Operating Frequency, Uplink
MHz
880-910 or 885-915
Operation Frequency, Downlink
MHz
925-950 or 930-960
Operating Bandwidth Per Sub-band
MHz
0.2-25
Number of Sub-bands
4
Total Output Power, Uplink
dBm
Total Output Power, Downlink
dBm
27
Maximum System Gain
dB
90
Attenuation Adjustment Range (1dB step)
dB
0-30
Pass Band Ripple, p-p
dB
≤5
Uplink Noise Figure
dB
5
37
40
Out-of-Band Gain
Intermodulation
Spurious Emission
EVM
Compliance with 3GPP TS 25.106
ACRR
PCDE
Spurious Emission Mask
sec
System Group Delay
≤ 6.5
Offset ≥ 600KHz
Out-of-Band Rejection
Offset ≥ 1MHz
≥ 45
dBc
≥ 60
Intermodulation @ GSM
dBc
≥ 40
Absolute Maximum RF input power
dBm
-10
≤ 1.5
Input VSWR

50
Dimensions, H x W x D
mm
430 x 300 x 164
Weight (approx.)
kg
18
Power Supply
VAC
100-240/47-63Hz
Power Consume
W
Power Up Waiting Time (approx.)
sec
180
MCU Battery Backup Time (approx.)
hr
2
Impedance
Mechanical
140
160
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
 95%
Operating Humidity
Environmental Class
MTBF
-33 to +50
IP65
hrs
> 50,000
Note: Typical specification at room temperature
.
Page 83 of 210
1800MHz Digital Band Selective Repeater
RX-1839
Specifications
Electrical
5W
10W
Frequency Range, Uplink
MHz
1710-1785
FrequencyRange, Downlink
MHz
1805-1880
Operating Bandwidth Per Sub-band
MHz
0.2-25
Instantaneous Bandwidth
MHz
60
Total Output Power, Uplink
dBm
30
Total Output Power, Downlink
dBm
Maximum System Gain
dB
90
GainAdjustmentRange (1dB step)
dB
0-30
Pass Band Ripple, p-p
dB
5
Uplink Noise Figure
dB
5
System Group Delay
sec
6.5
Number of Sub-bands
4
37
40
Out of Band Gain
ACRR
EVM
Compliance withETSI EN 301 908-15*
Out of Band Spectrum Emissions
Input Inter modulation
Output Inter modulation
Out-of-Band Rejection@ GSM
±600kHz
±1MHz
≥45
dBc
≥ 60
Inter modulation @ GSM
dBc
≥ 40
Absolute Maximum RF Input Power
dBm
-10
 1.5
Input VSWR

50
Dimensions, H x W x D
mm
430 x 300 x 164
Weight(approx.)
kg
18
Power Supply
VAC
Power Consumption(approx.)
W
Power Up Waiting Time(approx.)
sec
MCU Battery Backup Time(approx.)
hr
Impedance
Mechanical
100-240/47-63Hz
160
170
180
2
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
Environmental Class
MTBF
-33 to +55
 95%
Operating Humidity
IP65
hrs
≥ 50,000
Note: Typical specifications at room temperature
*: Compliant to LTE standard @ UL 23dBm.
Page 84 of 210
1900MHz Digital Band Selective Repeater
RX-1939
Specifications
Electrical
5W
10W
Frequency Range, Uplink
MHz
1850-1910
FrequencyRange, Downlink
MHz
1930-1990
Operating Bandwidth Per Sub-band
MHz
0.2-25
Number of Sub-bands
4
Total Output Power, Uplink
dBm
Total Output Power, Downlink
dBm
Maximum System Gain
dB
90
GainAdjustmentRange (1dB step)
dB
0-30
Pass Band Ripple, p-p
dB
6
Uplink Noise Figure
dB
5
sec
6.5
dBc
≥ 45
±1MHz
dBc
≥ 60
9kHz-1GHz
dBm
-36
1GHz-12.75GHz
dBm
-30
dBm
-10
System Group Delay
±600kHz
30
37
Out-of-Band Rejection
Spurious
Absolute Maximum RF Input Power
40
 1.5
Input VSWR

50
Dimensions, H x W x D
mm/
in
430 x 300 x 164/16.9 x 11.8 x 6.5
Weight(approx.)
kg/lb
18/39.7
Power Supply
VAC
Power Consumption(approx.)
W
Power Up Waiting Time(approx.)
sec
180
MCU Battery Backup Time(approx.)
hrs
2
Impedance
Mechanical
100-240/47-63Hz
150
160
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF
hrs
≥ 50,000
Note: Typical specifications at room temperature
Page 85 of 210
2100MHz Digital Band Selective Repeater
RX-2139
Specifications
Electrical
5W
10W
Frequency Range, Uplink
MHz
1920-1980
Frequency Range, Downlink
MHz
2110-2170
Operating Bandwidth Per Sub-band
MHz
3-20
Instantaneous Bandwidth
MHz
30
Total Output Power, Uplink
dBm
23
Total Output Power, Downlink
dBm
Number of Sub-bands
20W
4
37
Maximum System Gain
40
43
90
Gain Adjustment Range (1dB step)
dB
0-30
Pass Band Ripple at 3.84MHz
dB
≤2
Uplink Noise Figure
dB
5
System Group Delay
sec
6.5
Out-of-Band Gain
Inter modulation
Spurious Emission
Compliance with 3GPP TS 25 106
Compliance with 3GPP TS 36 106
EVM
ACRR
PCDE
Spurious Emission Mask
Absolute Maximum RF Input Power
dBm
-10
 1.5
Input VSWR

50
Dimensions, H x W x D
mm
430 x 300 x 164
Weight(approx.)
kg
18
Impedance
Mechanical
Power Supply
100-240/47-63Hz
Power Consumption(approx.)
W
Power Up Waiting Time(approx.)
sec
MCU Battery Backup Time(approx.)
hr
150
160
180
2
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF
hr
180
≥ 50,000
Note: Typical specifications at room temperature
Page 86 of 210
 mBDA Series Digital
Band Selective
Repeater
Page 87 of 210
Multi-band Digital Band Selective Repeater
Features
•
•
•
•
•
•
•
•
2 or 3 bands configuration in one system.
Each band has up to 4 pass band segments with independent ON/OFF
for maximum flexibility.
5W/10W total output power for each band.
Integrated wireless modem for remote configuration, monitoring and control.
Offline isolation detection for easy commissioning.
Internal backup battery keeps the alarm unit running for up to two hours after
power failure.
Compatible to Comba generic OMT and CMS platform.
Designed for all weather outdoor installation – waterproof, damp-proof and
omni-sealed (IP65).
FunctionalBlock Diagram
DL PA
DL LNA
Digital Frequency
Selective Module
UL LNA
UL PA
BTS
Alarm
Indicator
Donor Ant
Main Control Unit
Power
Supply
Modem
Li-ion
BATT
Mobile
Ant
Mobile
RS485
DT
MT
OMT
OMT Computer with Data card
Alarm
Indicator
Main Control Unit
Power
Supply
Wireless
Modem
OMC
DL PA
DL LNA
Digital Frequency
Selective Module
UL LNA
UL PA
Page 88 of 210
Li-ion
BATT
Operation andMaintenance
•
•
•
•
Using a direct connection to a PC by RJ45, installation and commissioning of the system is
accomplished by the OMT. Using the integrated wireless modem, the equipment parameters can be
monitored and controlled remotely.
Controlled equipment parameters include: RF Switch, Carrier Switch, Isolation Detection Switch,
Channel No. Range, ATT, Over-Temp Threshold, DL Input Power Threshold, DLOutput Power
Threshold and Alarm Report Enable.
Monitored equipment parameters include:Alarms (LNA, PA, PLL unlock, Power Down, PSU Fault,
Door Open, DL Input power Overload, DL Output Power Low, Over Temp, VSWR), DL Output Power
and DL Input Power.
The RX-system has been developed to take advantage of advanced network operation, where the
CMS (optional) provides an effective solution for central monitoring of a group of Comba products.
Outline Drawing
440
408
355
Dual band
433
645
Page 89 of 210
Tri-band
Page 90 of 210
850MHz + 1900MHzDigital Band Selective Repeater
RX-7137
Specifications-850MHz
Electrical
5W
10W
Frequency Range, Uplink
MHz
824-849
FrequencyRange, Downlink
MHz
869-894
Operating Bandwidth Per Sub-band
MHz
0.2-24.8
Number of Sub-bands
2
Total Output Power, Uplink
dBm
Total Output Power, Downlink
dBm
33
37
Maximum System Gain
40
90
Gain AdjustmentRange (1dB step)
dB
0-30
Pass Band Ripple at FBW, p-p
dB
5
Uplink Noise Figure
dB
5
sec
 6.5
±600kHz
dB
≥ 45
±1MHz
dB
≥ 60
Intermodulation@ GSM
dBc
≥ 40
Absolute Maximum RF Input Power
dBm
-10
System Group Delay
Out-of-Band
GSM
Rejection@
 1.5
Input VSWR

Impedance
50
Note: Typical specifications at room temperature
Specifications-1900MHz
Electrical
5W
10W
Frequency Range, Uplink
MHz
1850-1910
FrequencyRange, Downlink
MHz
1930-1990
Operating Bandwidth Per Sub-band
0.2-25
Number of Sub-bands
4
Total Output Power, Uplink
dBm
Total Output Power, Downlink
dBm
Maximum System Gain
30
37
40
90
Gain AdjustmentRange (1dB step)
dB
0-30
Pass Band Ripple, p-p
dB
6
Uplink Noise Figure
dB
5
sec
 6.5
±600kHz
dB
≥ 45
±1MHz
dB
≥ 60
Intermodulation@ GSM
dBc
≥ 40
Absolute Maximum RF Input Power
dBm
System Group Delay
Out-of-Band
GSM
Rejection@
Impedance
-10
 1.5
Input VSWR

50
Note: Typical specifications at room temperature
Page 91 of 210
Specifications
Mechanical
5W
10W
Dimensions, H x W x D
mm/In
440x408x355/17.3x16x14
Weight (approx.)
kg/lb
45/99.2
Power Supply
100-240/47-63Hz
Power Consumption (approx.)
W
290
320
Power Up Waiting Time (approx.)
sec
180
MCU Battery Backup Time (approx.)
hr
2
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF
hr
Page 92 of 210
≥ 50,000
900MHz + 1800MHzDigital Band Selective Repeater
RX-7539
Specifications-900MHz
Electrical
5W
10W
Frequency Range, Uplink
MHz
880-910 or 885-915
FrequencyRange, Downlink
MHz
925-955 or 930-960
Operating Bandwidth Per Sub-band
MHz
0.2-25
Number of Sub-bands
4
Total Output Power, Uplink
dBm
Total Output Power, Downlink
dBm
27
37
Maximum System Gain
40
90
Gain AdjustmentRange (1dB step)
dB
0-30
Pass Band Ripple at FBW, p-p
dB
5
Uplink Noise Figure
dB
5
sec
 6.5
±600kHz
dB
≥ 45
±1MHz
dB
≥ 60
Intermodulation@ GSM
dBc
≥ 40
Absolute Maximum RF Input Power
dBm
-10
System Group Delay
Out-of-Band
GSM
Rejection@
 1.5
Input VSWR

Impedance
50
Note: Typical specifications at room temperature
Specifications-1800MHz
Electrical
5W
10W
Frequency Range, Uplink
MHz
1710-1785
Frequency Range, Downlink
MHz
1805-1880
Operating Bandwidth Per Sub-band
MHz
0.2-25
Instantaneous Bandwidth
MHz
60
Total Output Power, Uplink
dBm
Total Output Power, Downlink
dBm
Number of Sub-bands
4
Maximum System Gain
30
37
40
90
Gain AdjustmentRange (1dB step)
dB
0-30
Pass Band Ripple at FBW, p-p
dB
5
Uplink Noise Figure
dB
5
System Group Delay
sec
 6.5
Spurious Emission Mask
EVM
Compliance with ETSI EN 301 908-15*
Out of Band Gain
±600kHz
dB
≥ 45
±1MHz
dB
≥ 60
Intermodulation@ GSM
dBc
≥ 40
Absolute Maximum RF Input Power
dBm
Out-of-Band
GSM
Rejection@
Impedance
-10
 1.5
Input VSWR

50
Note: Typical specifications at room temperature,
*: Compliant to LTE standard @ UL 23dBm.
Page 93 of 210
Specifications
Mechanical
5W
10W
Dimensions, H x W x D
mm
440×408×355
Weight (approx.)
kg
45
Power Supply
100-240/47-63Hz
Power Consumption (approx.)
W
Power Up Waiting Time (approx.)
sec
MCU Battery Backup Time (approx.)
hr
300
330
180
2
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF
hr
Page 94 of 210
≥ 50,000
900MHz + 2100MHzDigital Band Selective Repeater
RX-7639
Specifications-900MHz
Electrical
5W
10W
Frequency Range, Uplink
MHz
880-910 or 885-915
FrequencyRange, Downlink
MHz
925-950 or 930-960
Operating Bandwidth Per Sub-band
MHz
0.2-25
Total Output Power, Uplink
dBm
27
Total Output Power, Downlink
dBm
Number of Sub-bands
4
37
Maximum System Gain
40
90
Gain AdjustmentRange (1dB step)
dB
0-30
Pass Band Ripple at FBW, p-p
dB
5
Uplink Noise Figure
dB
5
System Group Delay
sec
 6.5
±600kHz
dB
≥ 45
±1MHz
dB
≥ 60
Intermodulation@ GSM
dBc
≥ 40
Absolute Maximum RF Input Power
dBm
-10
Out-of-Band
GSM
Rejection@
 1.5
Input VSWR
Impedance

50
Note: Typical specifications at room temperature
Specifications-2100MHz
Electrical
5W
10W
Frequency Range, Uplink
MHz
1920-1980
FrequencyRange, Downlink
MHz
2110-2170
Operating Bandwidth Per Sub-band
3-20*
Number of Sub-bands
4
Instantaneous Bandwidth
MHz
30
Total Output Power, Uplink
dBm
23
Total Output Power, Downlink
dBm
Maximum System Gain
37
40
90
Gain AdjustmentRange (1dB step)
dB
0-30
Uplink Noise Figure
dB
5
System Group Delay
sec
 6.5
Spurious Emission Mask
Compliance with 3GPP TS 25 106
Compliance with 3GPP TS 36 106
EVM
Out-of-Band Gain
Absolute Maximum RF Input Power
dBm
 1.5
Input VSWR
Impedance
-10

50
Note: Typical specifications at room temperature
*: UMTS max bandwidth is 15MHz, LTE max bandwidth is 20MHz
Page 95 of 210
Specifications
Mechanical
5W
Dimensions, H x W x D
mm
Weight (approx.)
kg
10W
440×408×355
45
Power Supply
100-240/47-63Hz
Power Consumption (approx.)
W
290
320
Power Up Waiting Time (approx.)
sec
180
MCU Battery Backup Time (approx.)
hr
2
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF
hr
Page 96 of 210
≥ 50,000
1800MHz + 2100MHzDigital Band Selective Repeater
RX-7839
Specifications-1800MHz
Electrical
5W
10W
Frequency Range, Uplink
MHz
1710-1785
Frequency Range, Downlink
MHz
1805-1880
Operating Bandwidth Per Sub-band
MHz
0.2-25
Instantaneous Bandwidth
MHz
60
Total Output Power, Uplink
dBm
30
Total Output Power, Downlink
dBm
Number of Sub-bands
4
37
Maximum System Gain
40
90
Gain AdjustmentRange (1dB step)
dB
0-30
Pass Band Ripple at FBW, p-p
dB
5
Uplink Noise Figure
dB
5
System Group Delay
sec
 6.5
Spurious Emission Mask
EVM
Compliance with ETSI EN 301 908-15*
Out of Band Gain
±600kHz
dB
≥ 45
±1MHz
dB
≥ 60
Intermodulation@ GSM
dBc
≥ 40
Absolute Maximum RF Input Power
dBm
-10
Out-of-Band
GSM
Rejection@
 1.5
Input VSWR
Impedance

50
Note: Typical specifications at room temperature,
*: Compliant to LTE standard @ UL 23dBm.
Specifications-2100MHz
Electrical
5W
10W
Frequency Range, Uplink
MHz
1920-1980
FrequencyRange, Downlink
MHz
2110-2170
Operating Bandwidth Per Sub-band
3-20*
Number of Sub-bands
4
Instantaneous Bandwidth
MHz
Total Output Power, Uplink
dBm
Total Output Power, Downlink
dBm
Maximum System Gain
Gain AdjustmentRange (1dB step)
30
23
37
40
90
dB
0-30
Uplink Noise Figure
dB
5
System Group Delay
sec
 6.5
Spurious Emission Mask
Compliance with 3GPP TS 25 106
Compliance with 3GPP TS 36 106
EVM
Out-of-Band Gain
Absolute Maximum RF Input Power
dBm
Impedance
-10
 1.5
Input VSWR

50
Note: Typical specifications at room temperature
*: UMTS max bandwidth is 15MHz, LTE max bandwidth is 20MHz
Page 97 of 210
Specifications
Mechanical
5W
10W
Dimensions, H x W x D
mm
440×408×355
Weight (approx.)
kg
45
Power Supply
100-240/47-63Hz
Power Consumption (approx.)
W
MCU Battery Backup Time (approx.)
hr
310
330
2
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF
hr
Page 98 of 210
≥ 50,000
Tri-Band Digital Band Selective Repeater
RX-5239
Specifications-900MHz
Electrical
5W
10W
Frequency Range, Uplink
MHz
880-910 or 885-915
FrequencyRange, Downlink
MHz
925-955 or 930-960
Operating Bandwidth Per Sub-band
MHz
0.2-25
Total Output Power, Uplink
dBm
27
Total Output Power, Downlink
dBm
Number of Sub-bands
4
37
40
Maximum System Gain
90
Gain AdjustmentRange (1dB step)
dB
0-30
Pass Band Ripple at FBW, p-p
dB
5
Uplink Noise Figure
dB
5
System Group Delay
sec
 6.5
±600kHz
dB
≥ 45
±1MHz
dB
≥ 60
Intermodulation@ GSM
dBc
≥ 40
Absolute Maximum RF Input Power
dBm
-10
Out-of-Band
GSM
Rejection@
 1.5
Input VSWR

Impedance
50
Note: Typical specifications at room temperature
Specifications-1800MHz
Electrical
5W
10W
Frequency Range, Uplink
MHz
1710-1785
Frequency Range, Downlink
MHz
1805-1880
Operating Bandwidth Per Sub-band
MHz
0.2-25
Instantaneous Bandwidth
MHz
60
Total Output Power, Uplink
dBm
30
Total Output Power, Downlink
dBm
Number of Sub-bands
4
37
Maximum System Gain
40
90
Gain AdjustmentRange (1dB step)
dB
0-30
Pass Band Ripple at FBW, p-p
dB
5
Uplink Noise Figure
dB
5
System Group Delay
sec
 6.5
Spurious Emission Mask
EVM
Compliance with ETSI EN 301 908-15*
Out of Band Gain
Out-of-Band
GSM
Rejection@
±600kHz
dB
≥ 45
dB
≥ 60
Intermodulation@ GSM
dBc
≥ 40
Absolute Maximum RF Input Power
dBm
-10
±1MHz
 1.5
Input VSWR
Impedance

50
Note: Typical specifications at room temperature,
*: Compliant to LTE standard @ UL 23dBm.
Page 99 of 210
Specifications-2100MHz
Electrical
5W
10W
Frequency Range, Uplink
MHz
1920-1980
FrequencyRange, Downlink
MHz
2110-2170
Operating Bandwidth Per Sub-band
3-20*
Number of Sub-bands
4
Instantaneous Bandwidth
MHz
30
Total Output Power, Uplink
dBm
23
Total Output Power, Downlink
dBm
37
Maximum System Gain
40
90
Gain AdjustmentRange (1dB step)
dB
0-30
Uplink Noise Figure
dB
5
System Group Delay
sec
 6.5
Spurious Emission Mask
Compliance with 3GPP TS 25 106
Compliance with 3GPP TS 36 106
EVM
Out-of-Band Gain
Absolute Maximum RF Input Power
dBm
-10
 1.5
Input VSWR

Impedance
50
Note: Typical specifications at room temperature
*: UMTS max bandwidth is 15MHz, LTE max bandwidth is 20MHz
Specifications
Mechanical
5W
10W
Dimensions, H x W x D
mm
440×408×355
Weight (approx.)
kg
45
Power Supply
100-240/47-63Hz
Power Consumption (approx.)
W
Power Up Waiting Time (approx.)
sec
180
MCU Battery Backup Time (approx.)
hr
2
Enclosure Cooling
420
480
Convection
Equipment
N-Female
Combiner (Optional)
Din-Female
RF Connectors
Operating Temperature
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF
hr
Page 100 of 210
≥ 50,000
Digital Channel Selective Repeater-LTE
Features
•
•
•
•
•
•
•
Support 5/10/15/20MHz different bandwidth LTE carrier
Power Output software adjustable, up to20W Downlink Power Output.
Automatic Digital gain control and Antenna Feedback Cancellation (AFC)
feature that can reduce the isolation requirement up to 30dB.
Integrated WCDMA wireless modem for remote configuration, monitoring and
control.
Isolation detection for easy commissioning.
Compatible to Comba generic OMT and CMS platform.
Designed for all weather outdoor installation – waterproof, damp-proof and
omni-sealed (IP65).
Functional Block Diagram
PA1
LNA1
Mobile
Ant
Donor
Ant
DT
Integrated Frequency
selective module
MT
Mobile
BTS
LNA2
PA2
OMT
Computer with
Data card
Wireless
Modem
Alarm
Indicator
Main Control Unit
Power
Supply
Li-ion
BATT
Modem
OMC
OMT
External
Power
Operation andMaintenance
•
•
•
•
Using a direct connection to a PC by RJ45, installation and commissioning of the system is
accomplished by the OMT. Using the integrated wireless modem, the equipment parameters can be
monitored and controlled remotely.
Controlled equipment parameters include: RF Switch, Carrier Switch, Isolation Detection Switch,
Channel No. Range, ATT, Over-Temp Threshold, DL Input Power Threshold, DL Output Power
Threshold and Alarm Report Enable.
Monitored equipment parameters include: Alarms (LNA, PA, PLL unlock, Power Down, PSU Fault,
Door Open, DL Input power Overload, DL Output Power Low, Over Temp, VSWR), DL Output Power
and DL Input Power.
The system has been developed to take advantage of advanced network operation, where the CMS
(optional) provides an effective solution for central monitoring of a group of Comba products.
Page 101 of 210
Outline Drawing
164
300
RUN
ALM
430
MODEM
AC 100V-240V
50/60Hz
AC OUT
RS-485
DT
EXT_ALM
MODEM ANT
MT
Page 102 of 210
800MHz Digital Channel Selective Repeater
RX-0823
Specifications
Electrical
5W
10W
Frequency Range, Uplink
MHz
832-862
Frequency Range, Downlink
MHz
791-821
Operating Bandwidth
MHz
5/10/15/20 (5MHz Step)
Total Output Power, Uplink
dBm
23
Total Output Power, Downlink
dBm
Maximum System Gain
dB
100
Gain Adjustment Range (1dB step)
dB
0-30
Antenna Feedback Cancellation
dB
30
Uplink Noise Figure
dB
5
System Group Delay
sec
6.5
37
40
20W
43
Spectrum Emission Mask
ACRR
EVM
Compliance with 3GPP TS 36.106
PCDE
Inter modulation
Absolute
Power
Maximum
RF
Input
dBm
-10
 1.5
Input VSWR

50
Dimensions, H x W x D
mm
430 x 300 x 164
Weight(approx.)
kg
18
Power Supply
VAC
100-240/47-63Hz
Power Consumption(approx.)
W
Power Up Waiting Time(approx.)
sec
180
MCU Battery Backup Time(approx.)
hr
2
Impedance
Mechanical
130
140
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF
150
≥ 50,000
hr
Note: Typical specification at room temperature
Page 103 of 210
2600MHz Digital Channel Selective Repeater
RX-2623
Specifications
Electrical
5W
10W
Frequency Range, Uplink
MHz
2500-2570
Frequency Range, Downlink
MHz
2620-2690
Operating Bandwidth
MHz
5/10/15/20
Total Output Power, Uplink
dBm
23
Total Output Power, Downlink
dBm
Maximum System Gain
dB
100
Gain Adjustment Range (1dB step)
dB
0-30
Antenna Feedback Cancellation
dB
Gain -10
37
40
Uplink Noise Figure
dB
5
System Group Delay
sec
6.5
20W
43
Spectrum Emission Mask
ACRR
EVM
Compliance with 3GPP TS 36.106
PCDE
Inter modulation
Absolute Maximum RF Input Power
dBm
-10
Input VSWR
 1.5
LTE Modem
GSM/GPRS/EDGE: 900/1800 MHz;
WCDMA: 900/1800/2100 MHz;
FDD LTE: 800/900/1800/2100/2600 MHz;

50
Dimensions, H x W x D
mm
430 x 300 x 164
Weight(approx.)
kg
18
Power Supply
VAC
100-240/47-63Hz
Power Consumption(approx.)
W
MCU Battery Backup Time(approx.)
hr
Impedance
Mechanical
140
150
2
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF*
hr
160
≥50,000
Note: Typical specification at room temperature
Page 104 of 210
Digital Channel Selective Repeater-WCDMA/LTE
Features
•
•
Support 5/10/15/20MHz different bandwidth WCDMA/LTE carrier
Utilizing the latest Pre-distortion MCPA technologies, up to 20W Downlink Power
Output.
•
•
•
•
•
Automatic Digital gain control and Antenna Feedback Cancellation (AFC)
feature
Integrated Wireless modem for remote configuration, monitoring and control.
Real time Isolation detection for easy commissioning.
Compatible to Comba generic OMT and CMS platform.
Designed for all weather outdoor installation – waterproof, damp-proof and
omni-sealed (IP65).
Functional Block Diagram
PA1
LNA1
Mobile
Ant
Donor
Ant
DT
Integrated Frequency
selective module
MT
Mobile
BTS
LNA2
PA2
OMT
Computer with
Data card
Wireless
Modem
Alarm
Indicator
Main Control Unit
Power
Supply
Modem
OMC
OMT
Page 105 of 210
External
Power
Li-ion
BATT
900MHz Digital Channel Selective Repeater
RX-9123 V5
Specifications
Electrical
Frequency Range, Uplink
MHz
Frequency Range, Downlink
Operating Bandwidth
MHz
925-960
MHz
5/10/15/20
Instantaneous bandwidth
MHz
35
Total Output Power, Uplink
dBm
27
Total Output Power, Downlink
Maximum System Gain
dBm
43
dB
95
Gain Adjustment Range (1dB step)
dB
0-30, support AGC
Antenna Feedback Cancellation
dB
Gain - 5
Uplink Noise Figure
dB
5
System Group Delay
sec
 10
Number of Sub-bands
880-915
2
Spectrum Emission Mask
ACRR
EVM
Compliance with 3GPP TS 36.106
PCDE
Intermodulation
Absolute Maximum RF Input Power
dBm
Impedance
+10
 1.5
Input VSWR

50
mm
500 x 356 x 140
Mechanical
Dimensions, H x W x D
Weight(approx.)
kg
18
Power Supply
VAC
100-240/47-63Hz
Power Consumption(approx.)
W
130
MCU Battery Backup Time(approx.)
hr
Enclosure Cooling
RF Connectors
Operating Temperature
4.3-10
C
-33 to +55
 95%
Operating Humidity
Environmental Class
MTBF
2
Convection
IP65
hr
≥50,000
Note: Typical specification at room temperature
Page 106 of 210
1800MHz Digital Channel Selective Repeater
RX-1823 III3
Specifications
Electrical
Frequency Range, Uplink
MHz
1710-1785
Frequency Range, Downlink
Operating Bandwidth
MHz
1805-1880
MHz
5/10/15/20
Instantaneous bandwidth
MHz
40
Total Output Power, Uplink
dBm
27
Total Output Power, Downlink
dBm
43
Maximum System Gain
dB
95
Gain Adjustment Range (1dB step)
dB
0-30
Antenna Feedback Cancellation
dB
Gain - 5
Number of Sub-bands
2
Uplink Noise Figure
dB
5
System Group Delay
sec
 10
Spectrum Emission Mask
ACRR
EVM
Compliance with 3GPP TS 36.106
PCDE
Intermodulation
Absolute Maximum RF Input Power
dBm
+10
 1.5
Input VSWR

50
Dimensions, H x W x D
mm
500 x 356 x 140
Weight(approx.)
kg
18
Power Supply
VAC
100-240/47-63Hz
Power Consumption(approx.)
W
130
MCU Battery Backup Time(approx.)
hr
Impedance
Mechanical
2
Enclosure Cooling
Convection
RF Connectors
4.3-10
Operating Temperature
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF
hr
≥50,000
Note: Typical specification at room temperature
Page 107 of 210
2100MHz Digital Channel Selective Repeater
RX-2123 V5
Specifications
Electrical
Frequency Range, Uplink
MHz
1920-1980
Frequency Range, Downlink
Operating Bandwidth
MHz
2110-2170
MHz
5/10/15/20
Instantaneous bandwidth
MHz
40
Total Output Power, Uplink
dBm
27
Total Output Power, Downlink
dBm
43
Maximum System Gain
dB
95
Gain Adjustment Range (1dB step)
dB
0-30, support AGC
Antenna Feedback Cancellation
dB
Gain - 5
Uplink Noise Figure
dB
5
System Group Delay
sec
 10
Number of Sub-bands
2
Spectrum Emission Mask
ACRR
EVM
Compliance with 3GPP TS 36.106
PCDE
Intermodulation
Absolute Maximum RF Input Power
dBm
Impedance
+10
 1.5
Input VSWR

50
mm
500 x 356 x 140
Mechanical
Dimensions, H x W x D
Weight(approx.)
kg
18
Power Supply
VAC
100-240/47-63Hz
Power Consumption(approx.)
W
130
MCU Battery Backup Time(approx.)
hr
Enclosure Cooling
RF Connectors
Operating Temperature
2
Convection
4.3-10
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF
hr
≥50,000
Note: Typical specification at room temperature
Page 108 of 210
 mBDA Series Digital
Band Selective
Repeater
Page 109 of 210
mBDA Series Digital Band Selective Repeater
Features
•
•
•
•
•
•
•
•
Up to 3 or 4 pass band segments with independent ON/OFF for maximum
flexibility.
Supports Cellular Communication and NB-IoT(Stand Alone, Guard Band or
In-band)
Max. 2W total output power.
Offline isolation detection for easy commissioning.
Friendly and easy OMT interface via RJ45 connection
Integrated wireless modem for remote monitoring and control.
Compatible to Comba generic OMT and CMS platform.
Waterproof, damp-proof and omni-sealed (IP65).
Functional Block Diagram
PA1
LNA1
Donor
Ant
DT
Mobile
Ant
Integrated Frequency
selective module
MT
Mobile
BTS
LNA2
PA2
Wireless
Modem
Modem
Alarm
Indicator
Main Control Unit
Power
Supply
OMC
OMT
Page 110 of 210
External
Power
Li-ion
BATT
700MHz Digital Band Selective Repeater
mBDA-0733
Specifications
Electrical
0.5W
1W
Operating Frequency, Uplink
MHz
703-733
Operation Frequency, Downlink
MHz
758-788
Operating Bandwidth Per Sub-band
MHz
3-20
Number of Sub-bands
2W
3
Total Output Power, Uplink
dBm
Total Output Power, Downlink
dBm
17
Maximum System Gain
dB
80
Attenuation Adjustment Range (1dB step)
dB
0-30
Pass Band Ripple at FBW, p-p
dB
≤4
Uplink Noise Figure
dB
5
System Group Delay
sec
≤6
27
30
33
Out-of-Band Gain
Input Inter modulation
Compliance with 3GPP TS 36.106
Spurious Emission
EVM
ACRR
Absolute Maximum RF input power
dBm
Impedance
-10
≤ 1.6
Input VSWR

50
mm
350 x 220 x 100
Mechanical
Dimensions, W x H x D
Weight (approx.)
kg
7
Power Supply
VAC
100-240/47-63Hz
Power Consumption (approx.)
W
60
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF
hr
>50,000
Note: Typical specification at room temperature.
Page 111 of 210
800MHz Digital Band Selective Repeater
mBDA-0833
Specifications
Electrical
0.5W
1W
Operating Frequency, Uplink
MHz
832-862
Operation Frequency, Downlink
MHz
791-821
Operating Bandwidth Per Sub-band
MHz
0.2-20
Total Output Power, Uplink
dBm
17
Total Output Power, Downlink
dBm
Maximum System Gain
dB
80
Attenuation Adjustment Range (1dB step)
dB
0-30
Pass Band Ripple at FBW, p-p
dB
≤4
Uplink Noise Figure
dB
5
System Group Delay
sec
≤6
Number of Sub-bands
2W
4
27
30
33
Out-of-Band Gain
Intermodulation
Spurious Emission
Compliance with 3GPP TS 36.106
EVM
ACRR
PCDE
Spurious Emission Mask
Absolute Maximum RF input power
dBm
-10
≤ 1.6
Input VSWR

50
Dimensions, W x H x D
mm/in
361x222x93 / 14.2x8.7x3.7
Weight (approx.)
kg/lb
7 / 15.4
Power Supply
VAC
100-240/47-63Hz
Power Consumption (approx.)
W
Impedance
Mechanical
60
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
-33 to +55
 95%
Operating Humidity
Environmental Class
MTBF
IP65
hrs
>50,000
Note: Typical specification at room temperature;
Page 112 of 210
850MHz Digital Band Selective Repeater
mBDA-8133
Specifications
Electrical
0.5W
1W
Operating Frequency, Uplink
MHz
824-849
Operation Frequency, Downlink
MHz
869-894
Operating Bandwidth Per Sub-band
MHz
0.2-25*
Total Output Power, Uplink
dBm
23
Total Output Power, Downlink
dBm
Maximum System Gain
dB
80
Attenuation Adjustment Range (1dB step)
dB
0-30
Pass Band Ripple at FBW, p-p
dB
≤4
Uplink Noise Figure
dB
5
System Group Delay
sec
≤6
Number of Sub-bands
2W
3
27
30
33
Out-of-Band Gain
Intermodulation
Spurious Emission
Compliance with 3GPP TS 25.106 @ WCDMA
Compliance with 3GPP TS 36.106 @ LTE
EVM
ACRR
PCDE
Spurious Emission Mask
Out-of-Band
GSM
Rejection@
Offset ≥ 600KHz
Offset ≥ 1MHz
dBc
Intermodulation @ GSM
dBm
Absolute Maximum RF input power
dBm
≥ 45
≥ 60
≤ -13
-10
≤ 1.6
Input VSWR

50
Dimensions, W x H x D
mm/in
361x222x93 / 14.2x8.7x3.7
Weight (approx.)
kg/lb
7 / 15.4
Power Supply
VAC
100-240/47-63Hz
Power Consumption (approx.)
W
Impedance
Mechanical
Enclosure Cooling
RF Connectors
Operating Temperature
N-Female
C
-33 to +55
 95%
Operating Humidity
Environmental Class
MTBF
60
Convection
IP65
hrs
>50,000
Note: Typical specification at room temperature;
*:GSM/CDMA Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
Page 113 of 210
900MHz Digital Band Selective Repeater
mBDA-9133
Specifications
Electrical
0.5W
1W
Operating Frequency, Uplink
MHz
880-915
Operation Frequency, Downlink
MHz
925-960
Operating Bandwidth Per Sub-band
MHz
0.2-25*
Total Output Power, Uplink
dBm
23
Total Output Power, Downlink
dBm
Maximum System Gain
dB
80
Attenuation Adjustment Range (1dB step)
dB
0-30
Pass Band Ripple at FBW, p-p
dB
≤4
Number of Sub-bands
2W
4
27
30
Uplink Noise Figure
dB
5
System Group Delay
sec
≤ 6.5
33
Out-of-Band Gain
Intermodulation
Spurious Emission
Compliance with 3GPP TS 25.106 @ WCDMA
Compliance with 3GPP TS 36.106 @ LTE
EVM
ACRR
PCDE
Spurious Emission Mask
Out-of-Band
GSM
Rejection@
Offset ≥ 600KHz
Offset ≥ 1MHz
≥ 45
dBc
Inter modulation @ GSM
dBm
Absolute Maximum RF input power
dBm
≥ 60
≤ -13
-10
≤ 1.6
Input VSWR

50
Dimensions, W x H x D
mm/in
361x222x 93/14.2x8.7x3.7
Weight (approx.)
kg/lb
7/15.4
Power Supply
VAC
100-240/47-63Hz
Power Consumption (approx.)
W
60
Impedance
Mechanical
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
 95%
Operating Humidity
Environmental Class
MTBF
-33 to +55
IP65
hr
>50,000
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz.
Page 114 of 210
1800MHz Digital Band Selective Repeater
mBDA-1833
Specifications
Electrical
0.5W
1W
Operating Frequency, Uplink
MHz
1710-1785
Operation Frequency, Downlink
MHz
1805-1880
Operating Bandwidth Per Sub-band
MHz
0.2-25*
Total Output Power, Uplink
dBm
23
Total Output Power, Downlink
dBm
Maximum System Gain
dB
80
Attenuation Adjustment Range (1dB step)
dB
0-30
Pass Band Ripple at FBW, p-p
dB
≤4
Uplink Noise Figure
dB
5
System Group Delay
sec
≤6
Number of Sub-bands
2W
4
27
30
33
Out-of-Band Gain
Spurious Emission
EVM
ACRR
Compliance with 3GPP TS 36.106
PCDE
Spurious Emission Mask
Intermodulation
Out-of-Band
GSM
Rejection@
Offset ≥ 600KHz
Offset ≥ 1MHz
≥ 45
dBc
Inter modulation @ GSM
dBm
Absolute Maximum RF input power
dBm
≥ 60
≤ -13
-10
≤ 1.6
Input VSWR

50
Dimensions, W x H x D
mm/in
361x222x93/14.2x8.7x3.7
Weight (approx.)
kg/lb
7/15.4
Power Supply
VAC
100-240/47-63Hz
Power Consumption (approx.)
W
60
Impedance
Mechanical
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
-33 to +55
 95%
Operating Humidity
Environmental Class
MTBF
IP65
hr
>50,000
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz, LTE Max. Bandwidth 20MHz.
Page 115 of 210
1900MHz Digital Band Selective Repeater
mBDA-1933
Specifications
Electrical
0.5W
1W
Operating Frequency, Uplink
MHz
1850-1915
Operation Frequency, Downlink
MHz
1930-1995
Operating Bandwidth Per Sub-band
MHz
0.2-25*
Total Output Power, Uplink
dBm
23
Total Output Power, Downlink
dBm
Maximum System Gain
dB
80
Attenuation Adjustment Range (1dB step)
dB
0-30
Pass Band Ripple at FBW, p-p
dB
≤4
Uplink Noise Figure
dB
5
System Group Delay
sec
≤6
Number of Sub-bands
2W
3
27
30
33
Out-of-Band Gain
Intermodulation
Spurious Emission
Compliance with 3GPP TS 25.106 @ WCDMA
Compliance with 3GPP TS 36.106 @ LTE
EVM
ACRR
PCDE
Spurious Emission Mask
Out-of-Band
GSM
Rejection@
Offset ≥ 600KHz
Offset ≥ 1MHz
≥ 45
dBc
Inter modulation @ GSM
dBm
Absolute Maximum RF input power
dBm
≥ 60
≤ -13
-10
≤ 1.6
Input VSWR

50
Dimensions, W x H x D
mm/in
361 x 222 x 93/14.2 x 8.7 x 3.7
Weight (approx.)
kg/lb
7/15.4
Power Supply
VAC
100-240/47-63Hz
Power Consumption (approx.)
W
60
Impedance
Mechanical
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
 95%
Operating Humidity
Environmental Class
MTBF
-33 to +55
IP65
hr
>50,000
Note: Typical specification at room temperature;
*: GSM/CDMA Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
Page 116 of 210
AWS Digital Band Selective Repeater
mBDA-2033
Specifications
Electrical
0.5W
1W
Operating Frequency, Uplink
MHz
1710-1755
Operation Frequency, Downlink
MHz
2110-2155
Operating Bandwidth Per Sub-band
MHz
3-20*
Total Output Power, Uplink
dBm
17
Total Output Power, Downlink
dBm
Maximum System Gain
dB
80
Attenuation Adjustment Range (1dB step)
dB
0-30
Pass Band Ripple at 3.84MHz
dB
≤2
Number of Sub-bands
2W
3
27
30
Uplink Noise Figure
dB
5
System Group Delay
sec
≤6
33
Out-of-Band Gain
Inter modulation
Spurious Emission
Compliance with 3GPP TS 25.106 @ WCDMA
Compliance with 3GPP TS 36.106 @ LTE
EVM
ACRR
PCDE
Spurious Emission Mask
Absolute Maximum RF input power
dBm
-10
≤ 1.6
Input VSWR

50
Dimensions, W x H x D
mm/in
361 x 222 x 93/14.2 x 8.7 x 3.7
Weight (approx.)
kg/lb
7/15.4
Power Supply
VAC
100-240/47-63Hz
Power Consumption (approx.)
W
60
Impedance
Mechanical
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF
hr
>50,000
Note: Typical specification at room temperature;
*: WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
Page 117 of 210
2100MHzDigital Band Selective Repeater
mBDA-2133
Specifications
Electrical
0.5W
1W
Operating Frequency, Uplink
MHz
1920-1980
Operation Frequency, Downlink
MHz
2110-2170
Operating Bandwidth Per Sub-band
MHz
0.2-20*
Total Output Power, Uplink
dBm
17
Total Output Power, Downlink
dBm
Maximum System Gain
dB
80
Attenuation Adjustment Range (1dB step)
dB
0-30
Pass Band Ripple at 3.84MHz
dB
≤2
Number of Sub-bands
2W
4
27
30
Uplink Noise Figure
dB
5
System Group Delay
sec
≤6
33
Out-of-Band Gain
Inter modulation
Spurious Emission
Compliance with 3GPP TS 25.106 @ WCDMA
Compliance with 3GPP TS 36.106 @ LTE
EVM
ACRR
PCDE
Spurious Emission Mask
Absolute Maximum RF input power
dBm
-10
≤ 1.6
Input VSWR

50
Dimensions, W x H x D
mm/in
361 x 222 x 93/14.2 x 8.7 x 3.7
Weight (approx.)
kg/lb
7/15.4
Power Supply
VAC
100-240/47-63Hz
Power Consumption (approx.)
W
60
Impedance
Mechanical
Enclosure Cooling
Convection
RF Connectors
N-Female
Operating Temperature
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF
hr
>50,000
Note: Typical specification at room temperature;
*: WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
Page 118 of 210
2600MHzDigital Band Selective Repeater
mBDA-2633
Specifications
Electrical
0.5W
1W
Operating Frequency, Uplink
MHz
2500-2570
Operation Frequency, Downlink
MHz
2620-2690
Operating Bandwidth Per Sub-band
MHz
3-20
Total Output Power, Uplink
dBm
17
Total Output Power, Downlink
dBm
Maximum System Gain
dB
80
Attenuation Adjustment Range (1dB step)
dB
0-30
Pass Band Ripple at FBW, p-p
dB
≤4
Number of Sub-bands
2W
4
27
30
Uplink Noise Figure
dB
5
System Group Delay
sec
≤6
33
Out-of-Band Gain
Input Inter modulation
Compliance with 3GPP TS 36.106
Spurious Emission
EVM
ACRR
Absolute Maximum RF input power
dBm
-10
≤ 1.6
Input VSWR

50
Dimensions, W x H x D
mm/in
361 x 222 x 93/14.2 x 8.7 x 3.7
Weight (approx.)
kg/lb
7/15.4
Power Supply
VAC
100-240/47-63Hz
Power Consumption (approx.)
W
60
Impedance
Mechanical
Enclosure Cooling
Convection
RF Connectors
Operating Temperature
N-Female
C
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
MTBF
hr
>50,000
Note: Typical specification at room temperature.
Page 119 of 210
Combiner for Dual Single Band mBDAs
Features
•
•
•
•
Combiner is used for mBDA single band enclosure
Single in and single out
Uniform for the whole system
Easy installation
Specifications-model 1
Electrical
Band1
Band2
Operating Frequency (MHz)
806-960
1710-2170
Insert Loss (dB)
≤ 0.8
≤1
VSWR
≤ 1.5
≤ 1.5
Note: Typical specification at room temperature;
Specifications-model 2
Electrical
Band1
Band2
Operating Frequency (MHz)
1710-1880
1920-2170
Insert Loss (dB)
≤ 1.1
≤ 1.1
VSWR
≤ 1.5
≤ 1.5
Note: Typical specification at room temperature;
Mechanical
Dimensions, H x W x D (mm)
210 x 338 x 71
Weight (approx.) (kg)
4.6
RF Connectors
N-Female
Operating Temperature (C)
-33 to +55
Operating Humidity
 95%
Environmental Class
IP65
Outline Drawing
102
338
210
71
Combiner
Page 120 of 210
Wall
Master Unit
Slave Unit
Combiner
Final Show-After Combination
Note: mBDA equipments are not included, need order separately.
Page 121 of 210
mBDA Indoor Digital Band Selective Repeater
mBDA-100
Features
•
•
•
•
•
•
Max. 5 bands of 700/800/900/1800/2100/2600MHz.
Supports GSM, WCDMA, and LTE operating.
Supports multi operator configurations and up to 3 or 4 sub bands per band.
Operation via OMT software.
Friendly and easy OMT interface via RJ45 connection
Integrated wireless modem or Ethernet for remote monitoring and control.
Product Description
mBDA is a wireless enhanced solution where high-quality voice or high-speed data service is not
available between a mobile and a base station. mBDA is ideal for the first phase of the network rollout
and for any subsequent phase where cost, coverage, and quality need to be optimized.
mBDA offers a modular, robust design that is easy to install, manage and upgrade. It supports three
individually adjustable sub-bands for flexibility and high RF performance, supports multi-carrier and
multi-band operation.
Remote configuration and surveillance is possible through Comba’s remote control and monitoring
system via PC or wireless modem to the OMT/OMC.
Support Technologies
Frequency Range (MHz)
Band
Technologies
Downlink (DL)
Uplink (UL)
700MHz
LTE
703-733
758-788
800MHz
LTE
791-821
832-862
900MHz
GSM/WCDMA
930-960
885-915
1800MHz
GSM/LTE
1805-1880
1710-1785
2100MHz
WCDMA
2110-2170
1920-1980
2600MHz
LTE
2620-2690
2500-2570
WCDMA complies with 3GPP TS 25.106 V9.0.0 (2009-12) table 9.2, 9.3, 9.4 spectrum emission mask.
LTE service is based on 3GPP TS 36.106 V9.0.0 (2009-12)
RF Parameter
LTE 700 MHz
RF Parameter
DL
UL
Frequency Range (MHz)
703-733
758-788
Max Output Power Per Antenna Port1(Composite)
27, 30, 33
17
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
3
3
Operating Bandwidth (MHz)
3-20
3-20
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
Page 122 of 210
LTE 700 MHz
RF Parameter
DL
UL
System Group Delay (sec)
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation
3GPP
3GPP
DL
UL
Frequency Range (MHz)
791-821
832-862
Max Output Power Per Antenna Port1(Composite)
LTE 800 MHz
RF Parameter
27, 30, 33
17
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
3
3
Operating Bandwidth (MHz)
3-20
3-20
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation
3GPP
3GPP
System Group Delay (sec)
GSM/WCDMA*/LTE** 900 MHz
RF Parameter
DL
UL
Frequency Range (MHz)
930-960
885-915
Max Output Power Per Antenna Port1(Composite)
27, 30, 33
23
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
3
3
Operating Bandwidth (MHz)
0.2-24.8
0.2-24.8
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
System Group Delay (sec)
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation1
3GPP
3GPP
Page 123 of 210
GSM/LTE** 1800 MHz
RF Parameter
DL
UL
Frequency Range (MHz)
1805-1880
1710-1785
Max Output Power Per Antenna Port1(Composite)
27, 30, 33
23
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
3
3
Operating Bandwidth (MHz)
0.2-25
0.2-25
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
System Group Delay (sec)
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation2
3GPP
3GPP
*WCDMA complies with 3GPP TS 25.106 V9.0.0 (2009-12) table 9.2, 9.3, 9.4 spectrum emission mask.
**LTE service is based on 3GPP TS 36.106 V9.0.0 (2009-12)
1Intermodulation: WCDMA@3GPP; GSM @Less than-13dBm.
2Intermodulation: LTE@3GPP; GSM @Less than-13dBm.
WCDMA/LTE 2100 MHz
RF Parameter
DL
UL
Frequency Range (MHz)
2110-2170
1920-1980
Max Output Power Per Antenna Port1(Composite)
27, 30, 33
17
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
4
4
Operating Bandwidth (MHz)
5,10,15
5,10,15
Maximum System Gain (dB)
80
80
Pass Band Ripple at 3.84MHz
2
2
System Noise Figure (dB)
/
5
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation
3GPP
3GPP
DL
UL
Frequency Range (MHz)
2620-2690
2500-2570
Max Output Power Per Antenna Port
1(Composite)
System Group Delay (sec)
LTE 2600 MHz
RF Parameter
27, 30, 33
17
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
4
4
Operating Bandwidth (MHz)
3-20
3-20
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
Page 124 of 210
LTE 2600 MHz
RF Parameter
DL
UL
System Noise Figure (dB)
/
5
System Group Delay (sec)
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation
3GPP
3GPP
Combiner Specifications
Electrical
Band1
Band2
Band3
Band4
Operating Frequency (MHz)
791-960
1710-1880
1920-2170
2500-2690
Insert Loss (dB)
≤ 0.8
≤ 0.9
≤ 0.9
≤ 0.8
VSWR
≤ 1.5
≤ 1.5
≤ 1.5
≤ 1.5
Mechanical Specifications
System Rack (4 bands)
267 x 482 x 485, (10.5 x 19 x 19.1)
Power and Monitor Unit
220 x 80 x 440, (8.7 x 3.1 x 17.3)
Dimensions, H x W x D, mm (in)
Combiner Unit
220 x 60 x 230, (8.7 x 2.4 x 9.1)
RF Unit
220 x 60 x 350, (8.7 x 2.4 x 13.8)
System Rack (4 bands)
13.2, (29.1)
Power & Monitoring Unit
4, (8.8)
Combiner Unit
4, (8.8)
RF Card
3.8, (8.4)
Weight, kg (lb) (approx.)
Power & Monitoring Unit
15
RF Unit
50
Power Consumption, W (approx.)
Power Supply
100-240VAC/47-63Hz
Power Up Waiting Time (sec) (approx.)
180
Enclosure Cooling
Convection or Fan
RF Connectors
N Female
Operating Temperature (°C )
-20 to +40
Operating Humidity
10% to 85%
Environmental Class
IP30
MTBF ( hr)
≥ 50,000
Mounting
19” Rack
Page 125 of 210
BDA Indoor Digital Band Selective Repeater
mBDA-200S
Features
•
•
•
•
•
•
Max. 6 bands of
700UpperC/700LowerABC/800/850/1900/AWS/EAWS/2600MHz.
Supports GSM, CDMA, WCDMA, and LTE operating.
Supports multi operator configurations and up to 3 sub bands per band.
Operation via WEB based OMT software.
Friendly and easy OMT interface via RJ45 connection.
Support Ethernet for remote monitoring and control.
Product Description
mBDA is a wireless enhanced solution where high-quality voice or high-speed data service is not
available between a mobile and a base station. mBDA is ideal for the first phase of the network rollout
and for any subsequent phase where cost, coverage, and quality need to be optimized.
mBDA offers a modular, robust design that is easy to install, manage and upgrade. It supports three
individually adjustable sub-bands for flexibility and high RF performance, supports multi-carrier and
multi-band operation.
Remote configuration and surveillance is possible through Comba’s remote control and monitoring
system via PC to the OMT/OMC.
Support Technologies
Band
Technologies
Frequency Range (MHz)
Downlink (DL)
Uplink (UL)
700MHz Upper C
LTE
746-757
776-787
700MHz Lower ABC
LTE
728-746
698-716
800MHz (ESMR)
CDMA/LTE
862-869
817-824
850MHz
GSM/CDMA/WCDMA/LTE
869-894
824-849
1900MHz
GSMCDMA/WCDMA/LTE
1930-1995
1850-1915
EAWS
WCDMA/LTE
2110-2180
1710-1780
2600MHz
LTE
2620-2690
2500-2570
RF Parameters
LTE700MHz Upper C
RF Parameter
DL
UL
Frequency Range (MHz)
746-757
776-787
Max Output Power Per Antenna Port
1(Composite)
27, 30, 33
17
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
1
1
Operating Bandwidth (MHz)
5-11
5-11
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
Page 126 of 210
LTE700MHz Upper C
RF Parameter
DL
UL
System Noise Figure (dB)
/
5
System Group Delay (usec)
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation1
3GPP
3GPP
DL
UL
Frequency Range (MHz)
728-746
698-716
Max Output Power Per Antenna Port1(Composite)
LTE700MHz Lower ABC
RF Parameter
27, 30, 33
17
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
3
3
Operating Bandwidth (MHz)
5-18
5-18
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
System Group Delay (usec)
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
3GPP
3GPP
DL
UL
Frequency Range (MHz)
862-869
817-824
Max Output Power Per Antenna Port
1(Composite)
27,30,33
17
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Intermodulation
2
CDMA/LTE 800 MHz (ESMR)
RF Parameter
Sub-bands
3
3
Operating Bandwidth (MHz)
0.2-10
0.2-10
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
8
5
System Group Delay (usec)
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation1
3GPP
3GPP
Page 127 of 210
GSM/CDMA/WCDMA/LTE 850 MHz
RF Parameter
DL
UL
Frequency Range (MHz)
869-894
824-849
Max Output Power Per Antenna Port
1(Composite)
27, 30, 33
23
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
3
3
Operating Bandwidth (MHz)
0.2-24.8
0.2-24.8
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
System Group Delay (usec)
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation1
3GPP
3GPP
Note:
Operating Bandwidth: GSM/CDMA Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
*WCDMA is based on 3GPP TS 25.106 V9.0.0 (2009-12).
**LTE service is based on 3GPP TS 36.106 V9.0.0 (2009-12)
1
Intermodulation: WCDMA@3GPP; GSM/CDMA@Less than-13dBm.
2Intermodulation: LTE@3GPP; GSM @Less than-13dBm.
RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.0dB.
RF Parameters
GSM/CDMA/WCDMA/LTE 1900 MHz
RF Parameter
DL
UL
Frequency Range (MHz)
1930-1995
1850-1915
Max Output Power Per Antenna Port
1(Composite)
27, 30, 33
23
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
3
3
Operating Bandwidth (MHz)
0.2-25
0.2-25
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
System Group Delay (usec)
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation1
3GPP
3GPP
Page 128 of 210
WCDMA/LTE EAWS
RF Parameter
DL
UL
Frequency Range (MHz)
2110-2180
1710-1780
Max Output Power Per Antenna Port
1(Composite)
27, 30, 33
17
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
3
3
Operating Bandwidth (MHz)
5-20
5-20
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
System Group Delay (usec)
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation
3GPP
3GPP
LTE 2600 MHz
RF Parameter
DL
UL
Frequency Range (MHz)
2620-2690
2500-2570
Max Output Power Per Antenna Port
1(Composite)
27, 30, 33
17
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
3
3
Operating Bandwidth (MHz)
5-20
5-20
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
System Group Delay (usec)
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation
3GPP
3GPP
Note:
Operating Bandwidth: GSM/CDMA Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.0dB.
Page 129 of 210
MechanicalSpecifications
Dimensions, H x W x D, mm (in)
Weight, kg (lb) (approx.)
Power Consumption, W (approx.)
System Rack (4 bands)
267 x 482 x 485, (10.5 x 19 x 19.1)
Power Unit
220 x 80 x 440, (8.7 x 3.1 x 17.3)
Combiner Unit
220 x 60 x 230, (8.7 x 2.4 x 9.1)
RF Unit
220 x 60 x 350, (8.7 x 2.4 x 13.8)
System Rack (4 bands)
13.2, (29.1)
Power and Monitor Unit
4, (8.8)
Combiner Unit
4, (8.8)
RF Card
3.8, (8.4)
Power and Monitor Unit
15
RF Unit
50
Power Supply
100-240VAC/47-63Hz
Power Up Waiting Time (sec) (approx.)
180
Enclosure Cooling
Convection or Fan
700UpperC/700LowerABC/800/850/1900/EAWS
(4.3-10)
2600MHz (N-Female)
-20 to +40
RF Connectors
Operating Temperature (°C )
Operating Humidity
10% to 85%
Environmental Class
IP30
MTBF ( hr)
≥ 50,000
Mounting
19” Rack
Appendix I: Combiner Specifications
Electrical
Band1
Band2
Band3
Band4
698-788
824-894
1850-1995
1710-1755&2110-215
5
Insert Loss (dB)
≤ 0.7
≤ 0.7
≤ 0.8
≤1
VSWR
≤ 1.6
≤ 1.6
≤ 1.6
≤ 1.6
Operating Frequency (MHz)
Mechanical
Dimensions
HxWxD, mm (in)
226.5 x 58.6 x 251, (8.9 x 2.4 x 9.9)
Weight (approx.), kg (lb)
4, (8.8)
RF Connectors
Operating Temperature , C
(F)
4.3-10Female
-20 to +40 (68 to 104)
Operating Humidity
85%
Environmental Class
IP30
Note: Typical specification at room temperature;
Page 130 of 210
Appendix II: Ordering Information
Module Name
P/N
RACK
mBDA RACK Unit
mBDA-RACK-E01
PMU
mBDA Power and Monitor Unit
mBDA-PMU-A92W300
COMBINER
UNIT
mBDA DT Combiner
mBDA-CB-ABPK4ID1
mBDA MT Combiner
mBDA-CB-ABPK4ID2
700MHz LowerABC mBDA RF Unit, 0.5W
mBDA-RF-7LP27Q
700MHz LowerABC mBDA RF Unit, 2W
mBDA-RF-7LP33Q
700MHz UpperC mBDA RF Unit, 0.5W
mBDA-RF-7UP27Q
700MHz UpperC mBDA RF Unit, 2W
mBDA-RF-7UP33Q
800MHz mBDA RF Unit, 0.5W
mBDA-RF-80P27Q
800MHz mBDA RF Unit, 2W
mBDA-RF-80P33Q
850MHz mBDA RF Unit, 0.5W
mBDA-RF-85P27Q
850MHz mBDA RF Unit, 2W
mBDA-RF-85P33Q
1900MHz mBDA RF Unit, 0.5W
mBDA-RF-19P27Q
1900MHz mBDA RF Unit, 2W
mBDA-RF-19P33Q
EAWS mBDA RF Unit, 0.5W
mBDA-RF-EAWSP27Q
EAWS mBDA RF Unit, 2W
mBDA-RF-EAWSP33Q
2600MHz mBDA RF Unit, 0.5W
mBDA-RF-26P27
2600MHz mBDA RF Unit, 2W
mBDA-RF-26P33
RF UNIT
Page 131 of 210
mBDA Indoor Digital Band Selective Repeater
mBDA-300
Features
•
•
•
•
•
•
Max. 5 bands of 700(APT) 850/1800 (or 1900)/2100 (or AWS)/2600MHz.
Supports GSM, CDMA, WCDMA, and LTE operating.
Supports multi operator configurations and up to 3 or 4 sub bands per band.
Operation via OMT software.
Friendly and easy OMT interface via RJ45 connection.
Integrated wireless modem or Ethernet for remote monitoring and control.
ProductDescription
mBDA is a wireless enhanced solution where high-quality voice or high-speed data service is not
available between a mobile and a base station. mBDA is ideal for the first phase of the network rollout
and for any subsequent phase where cost, coverage, and quality need to be optimized.
mBDA offers a modular, robust design that is easy to install, manage and upgrade. It supports three
individually adjustable sub-bands for flexibility and high RF performance, supports multi-carrier and
multi-band operation.
Remote configuration and surveillance is possible through Comba’s remote control and monitoring
system via PC or wireless modem to the OMT/OMC.
Support Technologies
Frequency Range (MHz)
Band
Technologies
Downlink (DL)
Uplink (UL)
700MHz*
LTE
758-788
703-733
850MHz
GSM/CDMA/WCDMA**
869-894
824-849
1800MHz
GSM/LTE
1805-1880
1710-1785
1900MHz
GSMCDMA/WCDMA**
1930-1995
1850-1915
AWS
WCDMA/LTE
2110-2155
1710-1755
2100MHz
WCDMA/LTE**
2110-2170
1920-1980
2600MHz
LTE
2620-2690
2500-2570
*700MHz is APT band, 2 options as 703-733/758-788 and 718-748/773-803.
**WCDMA complies with 3GPP TS 25.106 V9.0.0 (2009-12) table 9.2, 9.3, 9.4 spectrum emission mask.
Page 132 of 210
RF Parameters
LTE 700A
RF Parameter
DL
UL
Frequency Range (MHz)
758-788
703-733
Max Output Power Per Antenna Port1(Composite)
27, 30, 33
17
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
3
3
Operating Bandwidth (MHz)
3-20
3-20
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation
3GPP
3GPP
System Group Delay (sec)
GSM/CDMA/WCDMA 850 MHz
RF Parameter
DL
UL
Frequency Range (MHz)
869-894
824-849
Max Output Power Per Antenna Port1(Composite)
27, 30, 33
23
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
3
3
Operating Bandwidth (MHz)
0.2-24.8
0.2-24.8
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
System Group Delay (sec)
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation1
3GPP
3GPP
DL
UL
Frequency Range (MHz)
1805-1880
1710-1785
Max Output Power Per Antenna Port1(Composite)
27, 30, 33
23
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
4
4
Operating Bandwidth (MHz)
0.2-25
0.2-25
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
GSM/LTE 1800 MHz
RF Parameter
Page 133 of 210
6
System Group Delay (sec)
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation2
3GPP
3GPP
Note:
Operating Bandwidth: GSM/CDMA Max. Bandwidth 25MHz; WCDMA Max. Bandwidth 15MHz; LTE Max. Bandwidth 20MHz.
1
Intermodulation: WCDMA @ 3GPP; GSM/CDMA @ Less than-13dBm.
2Intermodulation: LTE @ 3GPP; GSM @ Less than-13dBm.
RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.5dB.
GSM/CDMA/WCDMA 1900 MHz
RF Parameter
DL
UL
Frequency Range (MHz)
1930-1995
1850-1915
Max Output Power Per Antenna Port1(Composite)
27, 30, 33
23
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
3
3
Operating Bandwidth (MHz)
0.2-25
0.2-25
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation1
3GPP
3GPP
DL
UL
Frequency Range (MHz)
2110-2170
1920-1980
Max Output Power Per Antenna Port1(Composite)
27, 30, 33
17
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
4
4
Operating Bandwidth (MHz)
3-20
3-20
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
System Group Delay (sec)
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation
3GPP
3GPP
System Group Delay (sec)
WCDMA/LTE 2100 MHz
RF Parameter
Page 134 of 210
RF Parameters
WCDMA/LTE AWS
RF Parameter
DL
UL
Frequency Range (MHz)
2110-2155
1710-1755
Max Output Power Per Antenna Port1(Composite)
27, 30, 33
17
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
3
3
Operating Bandwidth (MHz)
3-20
3-20
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
System Group Delay (sec)
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation
3GPP
3GPP
DL
UL
Frequency Range (MHz)
2620-2690
2500-2570
Max Output Power Per Antenna Port
1(Composite)
LTE 2600 MHz
RF Parameter
27, 30, 33
17
2 Carriers
-3
/
4 Carriers
-6
/
8 Carriers
-9
/
Sub-bands
4
4
Operating Bandwidth (MHz)
3-20
3-20
Maximum System Gain (dB)
80
80
Pass Band Ripple at FBW, p-p (dB)
4
4
System Noise Figure (dB)
/
5
System Group Delay (sec)
6
6
Gain Adjustable Range
0-30
0-30
Emission Mask
3GPP
3GPP
Intermodulation
3GPP
3GPP
Note:
Operating Bandwidth: GSM/CDMA Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
1Intermodulation: WCDMA @ 3GPP; GSM/CDMA @ Less than-13dBm
RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.5dB.
Page 135 of 210
MechanicalSpecifications
System Rack (4 bands)
267 x482 x 485, (10.5 x 19 x19.1)
Power Unit
220 x 80 x 440, (8.7 x 3.1 x 17.3)
Dimensions, Hx Wx D, mm (in)
Combiner Unit
220 x 60 x 230, (8.7 x 2.4 x 9.1)
RF Unit
220 x 60 x 350, (8.7 x 2.4 x 13.8)
System Rack (4 bands)
13.2, (29.1)
Power and Monitor Unit
4, (8.8)
Combiner Unit
4, (8.8)
RF Card
3.8, (8.4)
Weight, kg (lb) (approx.)
Power and Monitor Unit
15
RF Unit
50
Power Consumption, W (approx.)
Power Supply
100-240VAC/47-63Hz
Power Up Waiting Time (sec)
(approx.)
180
Enclosure Cooling
Convection or Fan
RF Connectors
N Female
Operating Temperature (°C )
-20 to +40
Operating Humidity
10% to 85%
Environmental Class
IP30
MTBF ( hr)
≥ 50,000
Mounting
19” Rack
Page 136 of 210
 MP Series Digital Pico
Repeater
Page 137 of 210
MP Series Digital Pico Repeater
Features
•
•
•
•
•
•
•
•
Bandwidth adjustable for both downlink and uplink.
Max.2 pass band segments with independent ON/OFF for maximum flexibility.
Max. 20dBm total output power.
Offline isolation detection for easy commissioning.
Low noise amplifier improves system noise figure for better voice quality and
reduced drop call.
Highly integrated design with miniaturized enclosure, small size, light weight and
easy to install.
Includes Modem for remote monitoring (option).
Compatible to Comba generic OMT and CMS platform.
Block Diagram
PA1
LNA1
Mobile
Ant
Donor
Ant
DT
Integrated Frequency
selective module
MT
Mobile
BTS
LNA2
PA2
Wireless
Modem
Alarm
Indicator
Main Control Unit
Power
Supply
Modem
OMC
OMT
Page 138 of 210
External
Power
800MHz Digital Pico Repeater
MP-0832
Specifications
Electrical
17dBm
20dBm
Operating Frequency, Uplink
MHz
832-862
Operation Frequency, Downlink
MHz
791-821
Instantaneous Bandwidth
MHz
30
Operating Bandwidth Per Sub-band
MHz
3-20
Number of Sub-bands
2
Total Output Power, Uplink
dBm
17
17
Total Output Power, Downlink
dBm
17
20
Maximum System Gain
dB
75
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Pass Band Ripple at FBW, p-p
dB
≤4
System Group Delay
sec
≤6
Spurious Emission Mask
Intermodulation
Compliance with 3GPP TS 36.106
EVM
Absolute Maximum RF input power
dBm
-10
≤ 2.0
Input VSWR

50
Dimensions, W x H x D
mm
198 x 78 x 43
Weight (approx.)
kg
0.5
Input
VAC
100-240/50-60Hz
Output
VDC
12
W
14
Impedance
Mechanical
External Power Supply Unit
Power Consumption
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
85%
Operating Humidity
Environmental Class
MTBF
-10 to +40
IP30
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature
Page 139 of 210
900MHz Digital Pico Repeater
MP-9132
Specifications
Electrical
17dBm
20dBm
Operating Frequency, Uplink
MHz
880-915
Operation Frequency, Downlink
MHz
925-960
Instantaneous Bandwidth
MHz
35
Operating Bandwidth Per Sub-band*
MHz
0.2-25
Number of Sub-bands
2
Total Output Power, Uplink
dBm
17
17
Total Output Power, Downlink
dBm
17
20
Maximum System Gain
dB
75
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Pass Band Ripple at FBW, p-p
dB
≤4
System Group Delay
sec
≤6
Spurious Emission Mask
Compliance with 3GPP TS 25.106
Compliance with 3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power
dBm
-10
≤ 2.0
Input VSWR

50
Dimensions, W x H x D
mm
198 x 78 x 43
Weight (approx.)
kg
0.5
Input
VAC
100-240/50-60Hz
Output
VDC
12
W
14
Impedance
Mechanical
External Power Supply Unit
Power Consumption
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
85%
Operating Humidity
Environmental Class
MTBF
-10 to +40
IP30
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 140 of 210
1800MHz Digital Pico Repeater
MP-1832
Specifications
Electrical
17dBm
20dBm
Operating Frequency, Uplink
MHz
1710-1785
Operation Frequency, Downlink
MHz
1805-1880
Instantaneous Bandwidth
MHz
50
Operating Bandwidth Per Sub-band*
MHz
0.2-25
Number of Sub-bands
2
Total Output Power, Uplink
dBm
17
17
Total Output Power, Downlink
dBm
17
20
Maximum System Gain
dB
75
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Pass Band Ripple at FBW, p-p
dB
≤4
System Group Delay
sec
≤6
Spurious Emission Mask
Intermodulation
Compliance with 3GPP TS 36.106
EVM
Absolute Maximum RF input power
dBm
-10
≤ 2.0
Input VSWR

50
Dimensions, W x H x D
mm
198 x 78 x 43
Weight (approx.)
kg
0.5
Input
VAC
100-240/50-60Hz
Output
VDC
12
W
14
Impedance
Mechanical
External Power Supply Unit
Power Consumption
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
85%
Operating Humidity
Environmental Class
MTBF
-10 to +40
IP30
 50,000
hr
Remote Monitoring (option)
Built in Wireless Modem
Note: Typical specification at room temperature
*: GSM Max. Bandwidth 25MHz, LTE Max. Bandwidth 20MHz
Page 141 of 210
2100MHz Digital Pico Repeater
MP-2132
Specifications
Electrical
17dBm
20dBm
Operating Frequency, Uplink
MHz
1920-1980
Operation Frequency, Downlink
MHz
2110-2170
Instantaneous Bandwidth
MHz
50
Operating Bandwidth Per Sub-band
MHz
3-20
Number of Sub-bands
2
Total Output Power, Uplink
dBm
17
17
Total Output Power, Downlink
dBm
17
20
Maximum System Gain
dB
75
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Pass Band Ripple at FBW, p-p
dB
≤4
System Group Delay
sec
≤6
Spurious Emission Mask
Compliance with 3GPP TS 25.106
Compliance with 3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power
dBm
-10
≤ 2.0
Input VSWR

50
Dimensions, W x H x D
mm
198 x 78 x 43
Weight (approx.)
kg
0.5
Input
VAC
100-240/50-60Hz
Output
VDC
12
W
14
Impedance
Mechanical
External Power Supply Unit
Power Consumption
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
85%
Operating Humidity
Environmental Class
MTBF
-10 to +40
IP30
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature
Page 142 of 210
Multi-band Digital Pico Repeater
Features
•
•
•
•
•
•
•
•
•
2 or 3 bands configuration in one system
Bandwidth adjustable for both downlink and uplink.
Max.2 pass band segments with independent ON/OFF for maximum flexibility.
17 or 20dBm total output power.
Offline isolation detection for easy commissioning.
Low noise amplifier improves system noise figure for better voice quality and
reduced drop call.
Highly integrated design with miniaturized enclosure, small size, light weight and
easy to install.
Includes Modem for remote monitoring (option).
Compatible to Comba generic OMT and CMS platform.
Functional Block Diagram
PA
LNA
Band selective
module
Duplexer
Duplexer
PA
LNA
LTE MT
Band selective
module
LTE DT
PA
LNA
Band selective
module
WCDMA DT
Duplexer
WCDMA MT
Duplexer
PA
LNA
Band selective
module
Page 143 of 210
Dual-band Digital Pico Repeater
MP-7S32
Specifications-17dBm
Electrical
800MHz
1800MHz
Operating Frequency, Uplink
MHz
832-862
1710-1785
Operation Frequency, Downlink
MHz
791-821
1805-1880
Instantaneous Bandwidth
MHz
30
50
Operating Bandwidth Per Sub-band*
MHz
3-20
0.2-25
Total Output Power, Uplink
dBm
14
14
Total Output Power, Downlink
dBm
17
17
Maximum System Gain
dB
75
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Number of Sub-bands
2
Pass Band Ripple at FBW, p-p
dB
System Group Delay
sec
4
4
≤6
Spurious Emission Mask
Compliance with
3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power
dBm
-10
≤ 2.0
Input VSWR

50
Dimensions, W x H x D
mm
316 x 224 x 55
Weight (approx.)
kg
3
Input
VAC
100-240/50-60Hz
Output
VDC
12
Impedance
Mechanical
External Power Supply Unit
Power Consumption
W
26
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
 85%
Operating Humidity
Environmental Class
MTBF
-10 to +40
IP30
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 144 of 210
Specifications-20dBm
Electrical
800MHz
1800MHz
Operating Frequency, Uplink
MHz
832-862
1710-1785
Operation Frequency, Downlink
MHz
791-821
1805-1880
Instantaneous Bandwidth
MHz
30
50
Operating Bandwidth Per Sub-band*
MHz
3-20
Number of Sub-bands
0.2-25
2
Total Output Power, Uplink
dBm
17
17
Total Output Power, Downlink
dBm
20
Maximum System Gain
dB
75
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
Pass Band Ripple at FBW, p-p
dB
System Group Delay
sec
20
≥ 15
4
4
≤6
Spurious Emission Mask
Compliance with
3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power
dBm
-10
≤ 2.0
Input VSWR

50
Dimensions, W x H x D
mm
316 x 224 x 55
Weight (approx.)
kg
3
Input
VAC
100-240/50-60Hz
Output
VDC
12
Impedance
Mechanical
External Power Supply Unit
Power Consumption
W
26
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
-10 to +40
Operating Humidity
 85%
Environmental Class
IP30
MTBF
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 145 of 210
Dual-band Digital Pico Repeater
MP-7U32
Specifications-17dBm
Electrical
800MHz
900MHz
Operating Frequency, Uplink
MHz
832-862
880-915
Operation Frequency, Downlink
MHz
791-821
925-960
Instantaneous Bandwidth
MHz
30
35
Operating Bandwidth Per Sub-band*
MHz
3-20
0.2-25
Total Output Power, Uplink
dBm
14
14
Total Output Power, Downlink
dBm
17
17
Maximum System Gain
dB
70
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Number of Sub-bands
2
Pass Band Ripple at FBW, p-p
dB
System Group Delay
sec
4
4
≤6
Spurious Emission Mask
Compliance with 3GPP
TS 25.106
3GPP TS 36.106
Compliance with 3GPP
TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power
dBm
-10
≤ 2.8
Input VSWR

50
Dimensions, W x H x D
mm
316 x 224 x 55
Weight (approx.)
kg
3
Input
VAC
100-240/50-60Hz
Output
VDC
12
Impedance
Mechanical
External Power Supply Unit
Power Consumption
W
26
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
 85%
Operating Humidity
Environmental Class
MTBF
-10 to +40
IP30
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz; WCDMA, LTE Max. Bandwidth 20MHz.
Page 146 of 210
Dual-band Digital Pico Repeater
MP-7V32
Specifications-17dBm
Electrical
800MHz
2100MHz
Operating Frequency, Uplink
MHz
832-862
1920-1980
Operation Frequency, Downlink
MHz
791-821
2110-2170
Instantaneous Bandwidth
MHz
30
50
Operating Bandwidth Per Sub-band
MHz
3-20
3-20
Number of Sub-bands
2
Total Output Power, Uplink
dBm
14
14
Total Output Power, Downlink
dBm
17
17
Maximum System Gain
dB
75
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Pass Band Ripple at FBW, p-p
dB
System Group Delay
sec
4
4
≤6
Spurious Emission Mask
Compliance with
3GPP TS 25.106
3GPP TS 36.106
Compliance with
3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power
dBm
-10
≤ 2.0
Input VSWR

50
Dimensions, W x H x D
mm
316 x 224 x55
Weight (approx.)
kg
3
Input
VAC
100-240/50-60Hz
Output
VDC
12
W
26
Impedance
Mechanical
External Power Supply Unit
Power Consumption
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
-10 to +40
Operating Humidity
85%
Environmental Class
IP30
MTBF
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature;
.
Page 147 of 210
Specifications-20dBm
Electrical
800MHz
2100MHz
Operating Frequency, Uplink
MHz
832-862
1920-1980
Operation Frequency, Downlink
MHz
791-821
2110-2170
Instantaneous Bandwidth
MHz
30
50
Operating Bandwidth Per Sub-band
MHz
3-20
3-20
Number of Sub-bands
2
Total Output Power, Uplink
dBm
17
17
Total Output Power, Downlink
dBm
20
20
Maximum System Gain
dB
75
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Pass Band Ripple at FBW, p-p
dB
System Group Delay
sec
4
4
≤6
Spurious Emission Mask
Compliance with
3GPP TS 25.106
3GPP TS 36.106
Compliance with
3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power
dBm
-10
≤ 2.0
Input VSWR

50
Dimensions, W x H x D
mm
316 x 224 x55
Weight (approx.)
kg
3
Input
VAC
100-240/50-60Hz
Output
VDC
12
Impedance
Mechanical
External Power Supply Unit
Power Consumption
W
30
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
-10 to +40
Operating Humidity
85%
Environmental Class
IP30
MTBF
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature;
.
Page 148 of 210
Dual-band Digi tal Pico Repeater
MP-7532
Specifications-17dBm
Electrical
900MHz
1800MHz
Operating Frequency, Uplink
MHz
880-915
1710-1785
Operation Frequency, Downlink
MHz
925-960
1805-1880
Instantaneous Bandwidth
MHz
35
50
Operating Bandwidth Per Sub-band*
MHz
0.2-25
0.2-25
Total Output Power, Uplink
dBm
14
14
Total Output Power, Downlink
dBm
17
17
Maximum System Gain
dB
75
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Number of Sub-bands
2
Pass Band Ripple at FBW, p-p
dB
System Group Delay
sec
Spurious Emission Mask
4
≤4
≤6
Compliance with
3GPP TS 25.106 and
3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power
dBm
Compliance with
3GPP TS 36.106
-10
≤ 2.0
Input VSWR

50
Dimensions, W x H x D
mm
316 x 224 x 55
Weight (approx.)
kg
3
Input
VAC
100-240/50-60Hz
Output
VDC
12
W
26
Impedance
Mechanical
External Power Supply Unit
Power Consumption
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
85%
Operating Humidity
Environmental Class
MTBF
-10 to +40
IP30
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 149 of 210
Specifications-20dBm
Electrical
900MHz
1800MHz
Operating Frequency, Uplink
MHz
880-915
1710-1785
Operation Frequency, Downlink
MHz
925-960
1805-1880
Instantaneous Bandwidth
MHz
35
50
Operating Bandwidth Per Sub-band*
MHz
0.2-25
0.2-25
Number of Sub-bands
2
Total Output Power, Uplink
dBm
17
17
Total Output Power, Downlink
dBm
20
20
Maximum System Gain
dB
75
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Pass Band Ripple at FBW, p-p
dB
System Group Delay
sec
4
≤4
≤6
Spurious Emission Mask
Compliance with
3GPP TS 25.106
3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power
dBm
Compliance with
3GPP TS 36.106
-10
≤ 2.0
Input VSWR

50
Dimensions, W x H x D
mm
316 x 224 x 55
Weight (approx.)
kg
3
Input
VAC
100-240/50-60Hz
Output
VDC
12
Impedance
Mechanical
External Power Supply Unit
Power Consumption
W
30
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
-10 to +40
Operating Humidity
85%
Environmental Class
IP30
MTBF
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 150 of 210
Dual-band Digital Pico Repeater
MP-7632
Specifications-17dBm
Electrical
900MHz
2100MHz
Operating Frequency, Uplink
MHz
880-915
1920-1980
Operation Frequency, Downlink
MHz
925-960
2110-2170
Instantaneous Bandwidth
MHz
35
50
Operating Bandwidth Per Sub-band*
MHz
0.2-25
3-20
Total Output Power, Uplink
dBm
14
14
Total Output Power, Downlink
dBm
17
17
Maximum System Gain
dB
75
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Number of Sub-bands
2
Pass Band Ripple at FBW, p-p
dB
System Group Delay
sec
4
4
≤6
Spurious Emission Mask
Compliance with
3GPP TS 25.106
3GPP TS 36.106
Compliance with
3GPP TS 25.106
Intermodulation
EVM
Absolute Maximum RF input power
dBm
-10
≤ 2.0
Input VSWR

50
Dimensions, W x H x D
mm
316 x 224 x55
Weight (approx.)
kg
3
Input
VAC
100-240/50-60Hz
Output
VDC
12
W
26
Impedance
Mechanical
External Power Supply Unit
Power Consumption
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
85%
Operating Humidity
Environmental Class
MTBF
-10 to +40
IP30
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 151 of 210
Specifications-20dBm
Electrical
900MHz
2100MHz
Operating Frequency, Uplink
MHz
880-915
1920-1980
Operation Frequency, Downlink
MHz
925-960
2110-2170
Instantaneous Bandwidth
MHz
35
50
Operating Bandwidth Per Sub-band*
MHz
0.2-25
3-20
Number of Sub-bands
2
Total Output Power, Uplink
dBm
17
17
Total Output Power, Downlink
dBm
20
20
Maximum System Gain
dB
75
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Pass Band Ripple at FBW, p-p
dB
System Group Delay
sec
4
4
≤6
Spurious Emission Mask
Compliance with
3GPP TS 25.106
3GPP TS 36.106
Compliance with
3GPP TS 25.106
Intermodulation
EVM
Absolute Maximum RF input power
dBm
-10
≤ 2.0
Input VSWR

50
Dimensions, W x H x D
mm
316 x 224 x 55
Weight (approx.)
kg
3
Input
VAC
100-240/50-60Hz
Output
VDC
12
Impedance
Mechanical
External Power Supply Unit
Power Consumption
W
26
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
-10 to +40
Operating Humidity
85%
Environmental Class
IP30
MTBF
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 152 of 210
Dual-band Digital Pico Repeater
MP-7832
Specifications-17dBm
Electrical
1800MHz
2100MHz
Operating Frequency, Uplink
MHz
1710-1785
1920-1980
Operation Frequency, Downlink
MHz
1805-1880
2110-2170
Instantaneous Bandwidth
MHz
50
50
Operating Bandwidth Per Sub-band*
MHz
0.2-25
3-20
Total Output Power, Uplink
dBm
14
14
Total Output Power, Downlink
dBm
17
17
Maximum System Gain
dB
70
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Number of Sub-bands
2
Pass Band Ripple at FBW, p-p
dB
System Group Delay
sec
4
4
≤6
Spurious Emission Mask
Compliance with
3GPP TS 25.106
3GPP TS 36.106
Compliance with
3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power
dBm
-10
≤ 2.8
Input VSWR

50
Dimensions, W x H x D
mm
316 x 224 x 55
Weight (approx.)
kg
3
Input
VAC
100-240/50-60Hz
Output
VDC
12
W
30
Impedance
Mechanical
External Power Supply Unit
Power Consumption
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
85%
Operating Humidity
Environmental Class
MTBF
-10 to +40
IP30
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 153 of 210
Tri-band Digital Pico Repeater
MP-5K32
Specifications
Electrical
800MHz
900MHz
2100MHz
Operating Frequency, Uplink
MHz
832-862
880-915
1920-1980
Operation Frequency, Downlink
MHz
791-821
925-960
2110-2170
Instantaneous Bandwidth
MHz
30
35
50
Operating Bandwidth Per Sub-band*
MHz
3-20
0.2-25
3-20
Total Output Power, Uplink
dBm
14
14
14
Total Output Power, Downlink
dBm
17
17
17
Maximum System Gain
dB
70
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Number of Sub-bands
2
Pass Band Ripple at FBW, p-p
dB
System Group Delay
sec
Spurious Emission Mask
4
Compliance
with 3GPP TS
36.106
Intermodulation
EVM
Absolute Maximum RF input power
4
4
≤6
dBm
Compliance
with 3GPP TS
25.106
3GPP TS
36.106
Compliance
with 3GPP TS
25.106
3GPP TS
36.106
-10
≤ 2.8
Input VSWR

50
Dimensions, W x H x D
mm
316 x 224 x 55
Weight (approx.)
kg
3
Input
VAC
100-240/50-60Hz
Output
VDC
12
W
38
Impedance
Mechanical
External Power Supply Unit
Power Consumption
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
85%
Operating Humidity
Environmental Class
MTBF
-10 to +40
IP30
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 154 of 210
Tri-band Digital Pico Repeater
MP-5232
Specifications-17dBm
Electrical
900MHz
1800MHz
2100MHz
Operating Frequency, Uplink
MHz
880-915
1710-1785
1920-1980
Operation Frequency, Downlink
MHz
925-960
1805-1880
2110-2170
Instantaneous Bandwidth
MHz
35
50
50
Operating Bandwidth Per Sub-band*
MHz
0.2-25
0.2-25
3-20
Total Output Power, Uplink
dBm
14
14
14
Total Output Power, Downlink
dBm
17
17
17
Maximum System Gain
dB
70
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Number of Sub-bands
2
Pass Band Ripple at FBW, p-p
dB
System Group Delay
sec
Spurious Emission Mask
4
Compliance
with 3GPP TS
25.1063GPP
TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power
4
4
≤6
dBm
Compliance
with 3GPP TS
36.106
Compliance
with 3GPP TS
25.106
3GPP TS
36.106
-10
≤ 2.8
Input VSWR

50
Dimensions, W x H x D
mm
316 x 224 x 55
Weight (approx.)
kg
3
Input
VAC
100-240/50-60Hz
Output
VDC
12
W
38
Impedance
Mechanical
External Power Supply Unit
Power Consumption
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
85%
Operating Humidity
Environmental Class
MTBF
-10 to +40
IP30
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 155 of 210
Tri-band Digital Pico Repeater
MP-5632
Specifications
Electrical
800MHz
900MHz
1800MHz
Operating Frequency, Uplink
MHz
832-862
880-915
1710-1785
Operation Frequency, Downlink
MHz
791-821
925-960
1805-1880
Instantaneous Bandwidth
MHz
30
35
50
Operating Bandwidth Per Sub-band*
MHz
3-20
0.2-25
0.2-25
Total Output Power, Uplink
dBm
14
14
14
Total Output Power, Downlink
dBm
17
17
17
Maximum System Gain
dB
70
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
≥ 15
Number of Sub-bands
2
Pass Band Ripple at FBW, p-p
dB
System Group Delay
sec
4
4
4
Compliance
with 3GPP TS
36.106
≤6
Compliance
with 3GPP TS
25.106
3GPP TS
36.106
-10
Compliance
with
3GPP TS
36.106
Spurious Emission Mask
Intermodulation
EVM
Absolute Maximum RF input power
dBm
≤ 2.8
Input VSWR
Impedance

50
mm
316 x 224 x 55
Mechanical
Dimensions, W x H x D
Weight (approx.)
External Power Supply Unit
Power Consumption
kg
3
Input
VAC
100-240/50-60Hz
Output
VDC
12
W
38
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
Environmental Class
MTBF
-10 to +40
 85%
Operating Humidity
IP30
hr
Remote Monitoring (option)
 50,000
Built in WCDMA Modem
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz; WCDMA, LTE Max. Bandwidth 20MHz.
Page 156 of 210
Tri-band Digital Pico Repeater
MP-5832
Specifications
Electrical
800MHz
1800MHz
2100MHz
Operating Frequency, Uplink
MHz
832-862
1710-1785
1920-1980
Operation Frequency, Downlink
MHz
791-821
1805-1880
2110-2170
Operating Bandwidth Per Sub-band*
MHz
3-20
0.2-25
3-20
Number of Sub-bands
2
Total Output Power, Uplink
dBm
14
14
14
Total Output Power, Downlink
dBm
17
17
17
Maximum System Gain
dB
70
Attenuation Adjustment Range (1dB step)
dB
0-30
ALC Range
dB
Pass Band Ripple at FBW, p-p
dB
System Group Delay
sec
Spurious Emission Mask
≥ 15
≤4
EVM
Absolute Maximum RF input power
4
≤6
Compliance
with 3GPP TS
36.106
Intermodulation
4
dBm
Compliance
with 3GPP TS
36.106
Compliance
with 3GPP TS
25.106
3GPP TS
36.106
-10
≤ 2.8
Input VSWR

50
Dimensions, W x H x D
mm
316 x 224 x55
Weight (approx.)
kg
3
Input
VAC
100-240/50-60Hz
Output
VDC
12
W
38
Impedance
Mechanical
External Power Supply Unit
Power Consumption
Enclosure Cooling
Convection
Connectors
Operating Temperature
SMA-Female (SMA-Male to N-Female jumper included)
°C
-20 to +45
Operating Humidity
85%
Environmental Class
IP40
MTBF
hr
Remote Monitoring (option)
 50,000
Built in Wireless Modem
Note: Typical specification at room temperature;
*: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 157 of 210
 Public Safety
Page 158 of 210
CriticalPoint™ Public Safety Bi-Directional Amplifier
RX-7W22 Class A PS 700/800MHz BDA
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Digital/programmable utilizing FPGA
Supports public safety 700/800MHz in single band or dual band version
Supports P25 P1/P2 digital and conventional analogcommunications
simultaneously
Supports FirstNetTM LTE band 14
Single band versions include license to switch from original band to alternate
band
Single band can be upgradedto dual band via license key
Each band supports up to 32 channels
0.5/2W output power for each band
Channelized Auto Gain Control (AGC) / Channelized uplink squelch
Built-in mandatory isolation test to prevent BDA oscillation
Auto shutdown with alarm upon oscillation detection
Web based GUI for intelligent configuration, SNMP supported
NFPA compliant dry contact alarms, NEMA 4X enclosure
FCC: PX8RX-7W22, IC: 11919A-RX7W22
Specifications
Electrical
700MHz
Frequency Range, Uplink
MHz
Frequency Range, Downlink
MHz
Channel Bandwidth
KHz
Number of Channels
800MHz
US: 788-805, CA:
798-806
US: 758-775, CA:
768-776
12.5/25/75+10MHz (LTE,
US)
806-824
851-869
12.5/25/75
US: 32+1 (LTE), CA: 32
32
Total Output Power, Uplink
dBm
Total Output Power, Downlink
dBm
27/33
27/33
Maximum System Gain
dB
90
90
Gain Adjustment Range (1dB step)
dB
0-30
0-30
Pass Band Ripple, p-p
dB
5
5
Uplink Noise Figure
27
dB
Bandwidth: 12.5KHz
Bandwidth: 25KHz
System Group Delay
sec
Bandwidth: 75KHz
Bandwidth:
(LTE)
10MHz
Bandwidth:
(LTE)
Intermodulation
Spurious
9kHz to 1GHz
27
27
15
15
6.5
6.5
dBc
≥ 80 @ filter center +
75KHz
≥ 80 @ filter center +
75KHz
≥ 80 @ filter center +
200KHz
≥ 45 @ filter edge +
0.6MHz
≥ 60 @ filter edge + 1MHz
dBm
 -13
 -13
dBm
FCC Compliance
FCC Compliance
Bandwidth: 25KHz
Bandwidth: 75KHz
5
 35
≥ 80 @ filter center +
75KHz
≥ 80 @ filter center +
75KHz
≥ 80 @ filter center +
200KHz
≥ 45 @ filter edge +
0.6MHz
≥ 60 @ filter edge + 1MHz
Bandwidth: 12.5KHz
Out-of-Band Suppression
5
 35
10MHz
Page 159 of 210
Electrical
1GHz to 12.75GHz
700MHz
800MHz
10
10
dBm
Absolute Maximum RF Input Power
dBm
 1.5
 1.5

50
50
Dimensions, H x W x D
in(mm
)
20.9 x 15.4 x 8.3 (530 x 390 x 210)
Weight(without bracket)
lb(kg)
50.7 (23)
VAC
100-240/47-63Hz
VDC
-40 to -58
Single band
W
80
Dual band
W
100
Input VSWR
Impedance
Specifications
Mechanical
Power Supply
Power Consumption
Enclosure Cooling
Convection
RF Connectors
N-Female
Test Port
SMA, -22dB
Maximum Input for Dry Contact Port
24VDC, 1A / 110VAC, 0.5A
o
Operating Temperature
°C
F( )
-27 to +140 (-33 to +60)
Operating Humidity
 95%
Environmental Class
NEMA 4X
MTBF
≥100,000 @ 77oF
hr
Note: Typical specifications at room temperature,
OutlineDrawing
AC 100V-240V
50Hz/60Hz
MT_TEST
DT
PWR
RUN
ALM
MT
OMT
ALM1
ALM2
AUX
LAN
DT_TEST
Page 160 of 210
Part Numbers
Product Type
P/N
AC Version
DC Version
SGSNA_17_GZ_00139
SGSNA_17_GZ_00138
Single band 700MHz
RX7W22-07AA33AC
RX7W22-07AA3348
Single band 800MHz
RX7W22-08AA33AC
RX7W22-08AA3348
Dual band 700/800MHz
RX7W22-78AA33AC
RX7W22-78AA3348
Single band 700MHz
RX7W22-C7AA33AC
RX7W22-C7AA3348
Single band 800MHz
RX7W22-C8AA33AC
RX7W22-C8AA3348
Dual band 700/800MHz
RX7W22-CFAA33AC
RX7W22-CFAA3348
UL Certificate
Class A (US)
Class A (Canada)
License
Dual Band (700/800MHz) License
RX7W22-L783233
Page 161 of 210
CriticalPoint™ Public Safety Bi-Directional Amplifier
RX-7W22 Class B PS 700/800MHz BDA
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
Digital/programmable utilizing FPGA
Supports public safety 700/800MHz in single band or dual band version
Supports P25 P1/P2 digital and conventional analogcommunications
simultaneously
Supports FirstNetTM LTE band 14
Single band versions include license to switch from original band to alternate
band
Single band can be upgraded to dual band via license key
Each band supports up to 3 sub bands
0.5/2W output power for each band
Built-in mandatory isolation test to prevent BDA oscillation
Auto shutdown with alarm upon oscillation detection
Web based GUI for intelligent configuration, SNMP supported
NFPA compliant dry contact alarms, NEMA 4X enclosure
FCC: PX8RX7W22-B, IC: 11919A-RX7W22
Specifications
Electrical
700MHz
Frequency Range, Uplink
MHz
Frequency Range, Downlink
MHz
Operating Bandwidth
MHz
800MHz
US: 788-805, CA:
798-806
US: 758-775, CA:
768-776
Number of Sub Bands
US:806-817, CA:806-824
US:851-862, CA:806-824
0.2-10
0.2-10
3
3
Total Output Power, Uplink
dBm
Total Output Power, Downlink
dBm
Maximum System Gain
dB
90
90
Gain Adjustment Range (1dB step)
dB
0-30
0-30
Pass Band Ripple, p-p
dB
5
5
Uplink Noise Figure
dB
5
5
System Group Delay
sec
 6.5
 6.5
Out-of-Band Suppression
dBc
≥ 45 @ filter edge +
0.6MHz
≥ 60 @ filter edge + 1MHz
≥ 45 @ filter edge +
0.6MHz
≥ 60 @ filter edge + 1MHz
Intermodulation
dBm
 -13
 -13
FCC Compliance
FCC Compliance
9kHz to 1GHz
dBm
1GHz to 12.75GHz
dBm
Spurious
Absolute Maximum RF Input Power
27
27/33
dBm
Input VSWR
Impedance

Page 162 of 210
27/33
10
10
 1.5
 1.5
50
50
Specifications
Mechanical
Dimensions, H x W x D
in(mm)
20.9 x 15.4 x 8.3 (530 x 390 x 210)
Weight(without bracket)
lb(kg)
50.7 (23)
VAC
100-240/47-63Hz
VDC
-40 to -58
Power Supply
Single band
W
80
Dual band
W
100
Power Consumption
Enclosure Cooling
Convection
RF Connectors
N-Female
Test Port
SMA, -22dB
Maximum Input for Dry Contact Port
24VDC, 1A / 110VAC, 0.5A
oF(°C)
Operating Temperature
-27 to +140 (-33 to +60)
Operating Humidity
 95%
Environmental Class
NEMA 4X
MTBF
≥ 100,000 @ 77oF
hr
Note: Typical specifications at room temperature,
Outline Drawing
AC 100V-240V
50Hz/60Hz
MT_TEST
DT
PWR
RUN
ALM
MT
OMT
ALM1
ALM2
AUX
LAN
DT_TEST
Page 163 of 210
Part Numbers
Product Type
P/N
AC Version
DC Version
SGSNA_17_GZ_00139
SGSNA_17_GZ_00138
Single band 700MHz
RX7W22-07B333AC
RX7W22-07B33348
Single band 800MHz
RX7W22-08B333AC
RX7W22-08B33348
Dual band 700/800MHz
RX7W22-78B333AC
RX7W22-78B33348
RX7W22-C7B333AC
RX7W22-C7B33348
UL Certificate
Class B(US)
Class B (Canada)
Single band 700MHz
Single band 800MHz
RX7W22-C8B333AC
RX7W22-C8B33348
Dual band 700/800MHz
RX7W22-CFB333AC
RX7W22-CFB33348
License
Dual Band (700/800MHz) License
RX7W22-L78B333
Page 164 of 210
CriticalPoint™ Public Safety Bi-Directional Amplifier
RX-7W22 II2 5W Class A PS 700/800MHz BDA
Features
•
Digital/programmable utilizing FPGA
•
Supports public safety 700/800MHz in single band or dual band version
•
Supports P25 P1/P2 digital and conventional analog communications simultaneously
•
Single band versions include license to switch from original band to alternate band
•
Single band can be upgraded to dual band via license key
•
Each band supports up to 32 channels
•
5W output power for each band
•
Channelized Auto Gain Control (AGC) / Channelized uplink squelch
•
Built-in mandatory isolation test to prevent BDA oscillation
•
Auto shutdown with alarm upon oscillation detection
•
Web based GUI for intelligent configuration, SNMP supported
•
NFPA compliant dry contact alarms, NEMA 4X enclosure
Specifications
Electrical
700MHz
800MHz
Frequency Range, Uplink
MHz
799-805
806-824
Frequency Range, Downlink
MHz
769-775
851-869
Channel Bandwidth
KHz
12.5/25/100
12.5/25/100
Number of Channels
32
32
Total Output Power, Uplink
dBm
Total Output Power, Downlink
dBm
37
37
Maximum System Gain
dB
100
100
Gain Adjustment Range (1dB step)
dB
0-30
0-30
Pass Band Ripple, p-p
dB
5
5
Uplink Noise Figure
dB
5
5
 35
 35
sec
 25
 35
 15
 15
dBc
≥ 60 @ filter center +
75KHz
≥ 60 @ filter center +
75KHz
≥ 60 @ filter center +
200KHz
≥ 60 @ filter center +
75KHz
≥ 60 @ filter center +
75KHz
≥ 60 @ filter center +
200KHz
dBm
 -13
 -13
FCC Compliance
FCC Compliance
Bandwidth: 12.5KHz
System Group Delay
Bandwidth: 25KHz
Bandwidth: 100KHz
Bandwidth: 12.5KHz
Out-of-Band
Suppression
Bandwidth: 25KHz
Bandwidth: 100KHz
Intermodulation
30
9kHz to 1GHz
dBm
1GHz to 12.75GHz
dBm
Maximum RF Input Power without Damage
dBm
-10
-10
Maximum RF Input Power without Overdrive
dBm
-20
-20
 1.5
 1.5
50
50
Spurious
Input VSWR
Impedance

Mechanical
Page 165 of 210
Dimensions, H x W x D
in(mm)
22.4 x 15.4 x 9.0 (570 x 390 x 228)
Weight(without bracket)
lb(kg)
66.2 (30)
VAC
100-240/47-63Hz
Power Supply
Power
Consumption
VDC
-40 ~ -58
Single band
W
120
Dual band
W
200
Enclosure Cooling
Convection
RF Connectors
N-Female
Test Port
SMA, -27dB
Maximum Input for Dry Contact Port
Operating Temperature
24VDC, 1A / 110VAC, 0.5A
o
F( oC)
 95%
Operating Humidity
Environmental Class
MTBF
-27 to +140 (-33 to +60)
NEMA 4X
hr
≥ 100,000 @ 77 oF
Note: Typical specifications at room temperature,
Outline Drawing
Page 166 of 210
CriticalPoint™ Public Safety Bi-Directional Amplifier
RX-7W22 II2 5W Class B PS 700/800MHz BDA
Features
•
Digital/programmable utilizing FPGA
•
Supports public safety 700/800MHz in single band or dual band version
•
Supports P25 P1/P2 digital and conventional analog communications simultaneously
•
Supports FirstNetTM LTE band 14
•
Single band versions include license to switch from original band to alternate band
•
Single band can be upgraded to dual band via license key
•
Each band supports up to 3 sub bands
•
5W output power for each band
•
Built-in mandatory isolation test to prevent BDA oscillation
•
Auto shutdown with alarm upon oscillation detection
•
Web based GUI for intelligent configuration, SNMP supported
•
NFPA compliant dry contact alarms, NEMA 4X enclosure
Specifications
Electrical
700MHz
800MHz
Frequency Range, Uplink
MHz
788-805
806-824
Frequency Range, Downlink
MHz
758-775
851-869
Operating Bandwidth
MHz
0.2-10
0.2-10
3
3
Number of Sub Bands
Total Output Power, Uplink
dBm
30
Total Output Power, Downlink
dBm
37
37
Maximum System Gain
dB
100
100
Gain Adjustment Range (1dB step)
dB
0-30
0-30
Pass Band Ripple, p-p
dB
5
5
Uplink Noise Figure
dB
5
5
System Group Delay
sec
 6.5
 6.5
Out-of-Band Suppression
dBc
≥ 45 @ filter edge +
0.6MHz
≥ 60 @ filter edge +
1MHz
≥ 45 @ filter edge +
0.6MHz
≥ 60 @ filter edge +
1MHz
Intermodulation
dBm
 -13
 -13
FCC Compliance
FCC Compliance
9kHz to 1GHz
dBm
1GHz to 12.75GHz
dBm
Maximum RF Input Power without Damage
dBm
-10
-10
Maximum RF Input Power without Overdrive
dBm
-20
-20
 1.5
 1.5
50
50
Spurious
Input VSWR
Impedance

Page 167 of 210
Mechanical
Dimensions, H x W x D
in(mm)
22.4 x 15.4 x 9.0 (570 x 390 x 228)
Weight(without bracket)
lb(kg)
66.2 (30)
VAC
100-240/47-63Hz
VDC
-40 ~ -58
Single band
W
120
Dual band
W
200
Power Supply
Power
Consumption
Enclosure Cooling
Convection
RF Connectors
N-Female
Test Port
SMA, -27dB
Maximum Input for Dry Contact Port
Operating Temperature
24VDC, 1A / 110VAC, 0.5A
o
o
F( C)
-27 to +140 (-33 to +60)
Operating Humidity
 95%
Environmental Class
NEMA 4X
MTBF
hr
≥ 100,000 @ 77 oF
Note: Typical specifications at room temperature,
Page 168 of 210
CriticalPoint™ Public Safety Bi-Directional Amplifier
RX-4122 PS UHF 400MHz BDA
Features
•
Supports P25 P1/P2 digital and conventional analog communications simultaneously
•
Simplex and internal Duplexing supported
•
Internal dual window filter supported
•
Up to 32 narrow band filters (Class A)
•
Up to 4 wide band filters (Class B)
•
Channelized Auto Level Control (ALC) supported (Class A)
•
Channelized uplink squelch supported (Class A)
•
Uplink PA shutdown bring the minimum noise for Base Station
•
Built-in mandatory isolation test to prevent BDA oscillation
•
Auto shutdown with alarm upon oscillation detection
•
Web based GUI for intelligent configuration, SNMP supported
•
NFPA 1221 / IFC compliant dry contact alarms
•
NFPA 1221 / IFC compliant NEMA 4 enclosure
•
FCC Class A: PX8-RX4122-A, Class B: PX8-RX4122-B
•
UL AC: SGSNA/18/GZ/00076, DC: SGSNA/18/GZ/00075
Specifications
Electrical
Frequency Range
MHz
450 - 512
Total Output Power, Uplink
dBm
27
Total Output Power, Downlink
dBm
36 (TX/RX separate without Filter)
Single Window 2MHz @450-470MHz
Single Window 1MHz @470-512MHz
Dual Window 2MHz + 2MHz @450-470MHz
Dual Window 1MHz + 1MHz @470-512MHz
Dual Window 2MHz@450-470MHz + 1MHz
@470-512MHz
*Note
RF Windows (internal)
Maximum System Gain
dB
95
Gain Adjustment Range (1dB step)
dB
0-30
Pass Band Ripple, p-p
dB
3
Uplink Noise Figure
dB
7
Intermodulation
dBm
 -13
Spurious
dBm
FCC Compliance
Maximum RF Input Level without Damage
dBm
0
Maximum RF Input Level without Overdrive
-10
Input VSWR
 1.5
Impedance

50
*Note: Consult for passband and window configurations other than listed above
Page 169 of 210
Class A
Number of Filters
32
Filter Options /
Out-of-Band Suppression
/
System Group Delay
Bandwidth: 6.25KHz
≥ 60dBc @ filter center + 60KHz, 35us
Bandwidth: 12.5KHz
≥ 60dBc @ filter center + 65KHz, 35us
Bandwidth: 25KHz
≥ 50dBc @ filter center + 75KHz, 27us
Bandwidth: 75KHz
≥ 60dBc @ filter center + 200KHz, 15us
Class B
Number of Filters
4
200KHz – 5MHz
Filter Options
sec
System Group Delay
6.5
≥ 45dBc @ filter edge + 0.6MHz
≥ 60dBc @ filter edge + 1MHz
Out-of-Band Suppression
Mechanical
Dimensions, H x W x D
in(mm
)
Weight(without bracket)
lb(kg)
77 (35)
VDC
-40 to -58
VAC
120
W
85
31.5x15.4x12.4 (800×390×315)
Power Supply
Power Consumption
Enclosure Cooling
Convection
RF Connectors
N-Female
o
Operating Temperature
F(oC)
-27 to +140 (-33 to +60)
Operating Humidity
 95%
Environmental Class
NEMA 4
Note: Typical specifications at room temperature
Part Numbers
RX4122-XXYYZZFF
XX
Unit Class
Numbers:
YY
and
Filter
32 – Class A 32 filters
B4 – Class B 4 filters
Power
Level
separate):
(TX/RX
36 – 36dBm
ZZ
FF
Power Supply:
Filter Options:
AC – AC powered
DC – DC Powered
Various due to different
filter model
Outline Drawing
800
390
Page 170 of 210
315
270
CriticalPoint™Public Safety Distributed Antenna System
RH-7W22 PS 700/800MHz DAS
Features
•
•
•
•
•
•
•
•
•
•
•
•
Dual-band configuration supports 700MHz and 800MHz public safety bands
Supports P25 P1/P2 digital and conventional analog communications simultaneously
Supports FirstNetTM LTE Band 14 (Class B)
Up to 32channels (Class A) / 3 sub bands (Class B)
2W output power per band
Channelized Auto Level Control (ALC) supported (Class A)
Channelized uplink squelch supported (Class A)
Web based GUI for intelligent configuration, SNMP supported
Built-in mandatory isolation test to prevent oscillation
NFPA 1221 compliant dry contact alarms on MU/RUs
NFPA 1221 compliant NEMA4X enclosure for MU/RUs
FCC/UL approvals pending
Master Unit
Master Unit
Remote Unit
Remote Unit
Functional Block Diagram
Remote Unit
…
…
Up to 8
Master Unit
Remote Unit
Page 171 of 210
Specifications
Optical
System
700MHz,800MHz
Optical Fiber
Single Mode
Optical Wavelength
nm
1550, 1310 + WDM
MU
dBm
-4 to -2
RU
dBm
3 to 5
dB
6.5
Optical Output Power
Maximum Optical Loss
Fiber Connectors
MU: SC/APC, RU: SC/APC
Electrical (Class A)
700MHz
800MHz
799-805
806-824
769-775
851-869
Channel Bandwidth
12.5/25/75KHz
12.5/25/75KHz
Number of Filters
32
Frequency Range
Uplink
Downlink
Total Output Power, Uplink
MHz
32
dBm
27
Total Output Power, Downlink
33
33
Maximum System gain
dB
95
Gain Adjustment Range (1dB step)
dB
MU: 0-30, RU: 0-30
Pass Band Ripple (p-p)
dB
Spurious emission
Inter modulation
≤3
≤3
FCC Compliance
FCC Compliance
-13
-13
dBm
Uplink Noise Figure at Maximum Gain
dB
≤5
System Delay
sec
17-37
Max UL Input w/o Overdrive
dBm
-30
Max UL Input w/o Damage
dBm
-10
 1.5
Input VSWR

Impedance
50
Electrical (Class B)
700MHz
800MHz
788-805
806-817
758-775
851-862
Channel Bandwidth
200KHz - 10MHz
200KHz - 10MHz
Number of Filters
3
3
Uplink
Frequency Range
MHz
Downlink
Total Output Power, Uplink
dBm
27
Total Output Power, Downlink
33
33
Maximum System gain
dB
95
Gain Adjustment Range (1dB step)
dB
MU: 0-30, RU: 0-30
Pass Band Ripple (p-p)
dB
Spurious emission
Inter modulation
≤3
≤3
FCC Compliance
FCC Compliance
-13
-13
dBm
Uplink Noise Figure at Maximum Gain
dB
≤5
System Delay
sec
8.5
Max UL Input w/o Overdrive
dBm
-30
Max UL Input w/o Damage
dBm
Impedance
-10
 1.5
Input VSWR

50
Page 172 of 210
Specifications
Mechanical –MU
Dimensions, H x W x D
in(mm)
22.4 x 15.4 x 8.5 (570 x 390 x 215)
Weight without Bracket
lb(kg)
66 (30)
Power Supply
VDC
-40 to -58
Power Consumption (approx.)
W
100
RF Connectors
N-Female, duplex
Fiber Connectors
Operating Temperature
SC/APC
°C
-40 to +55
≤ 95%
Operating Humidity
Ingress protection
NEMA 4X
Enclosure Cooling
Convection
100,000 @ 77 oF
MTBF
Mechanical –RU
Dimensions, H x W x D
in(mm)
22.4 x 15.4 x 8.5 (570 x 390 x 215)
Weight without Bracket
lb(kg)
66 (30)
Power Supply
VDC
-40 to -58
Power Consumption (approx.)
W
100
RF Connectors
N-Female, duplex
Fiber Connectors
Operating Temperature
SC/APC
°C
-40 to +55
≤ 95%
Operating Humidity
Ingress protection
NEMA 4X
Enclosure Cooling
Convection
100,000 @ 77 oF
MTBF
Note: Typical specifications at room temperature
Part Numbers
Product Type
Part Number
Class A
MU Dual Band 700/800MHz, 1 to 4 x RUs, DC-48V
RH7W22-D7848E4
MU Dual Band 700/800MHz, 1 to 8 x RUs, DC-48V
RH7W22-D7848E8
RU Single Band 700MHz, DC-48V
RH7W22-R073348
RU Single Band 800MHz, DC-48V
RH7W22-R083348
RU Dual Band 700/800MHz, DC-48V
RH7W22-R783348
Class B
MU Dual Band 700/800MHz, 1 to 4 x RUs, DC-48V
RH7W22-D78B48E4
MU Dual Band 700/800MHz, 1 to 8 x RUs, DC-48V
RH7W22-D78B48E8
RU Single Band 700MHz, DC-48V
RH7W22-R07B3348
RU Single Band 800MHz, DC-48V
RH7W22-R08B3348
RU Dual Band 700/800MHz, DC-48V
RH7W22-R78B3348
License (For Class A and Class B)
Dual Band (700/800MHz) License
RH7W22-L7833
Page 173 of 210
CriticalPoint™ Public Safety Backup Battery Unit
PSU-9248
Features
•
•
•
•
•
Provides the uninterruptible power supply (-48V) to Public Safety BDA or DAS.
Supports multi alarm LEDs:
AC fail alarm
Battery alarm
Power controller failure alarm
4 External alarms
Provides 4 External ports to connect Dry Contact Port of Public Safety BDA or DAS
Provides 7 Dry connectors to the monitor centre.
Supports local monitoring and control by WIFI or RJ45 port.
Specifications
Mechanical
29.4 x 23.8 x 12.0 (747 x
605 x 305)
44.1(20) (not include the
batteries)
Dimensions, H x W x D
in(mm)
Weight(without bracket)
lb(kg)
Power Supply (Input)
VAC
100-240/47-63Hz
Power Supply (Output)
VDC
-48V
Type 1
100W12H
Type 2
100W24H or 200W12H
Power Capacity
Enclosure Cooling
Convection
Maximum Input for Dry Contact Port
24VDC, 3A
 95%
Operating Humidity
Environmental Class
NEMA 4X
Note: Typical specifications at room temperature,
Outline Drawing
AC Input Normal
AC Fail Operating
On Battery
Battery Low
Charger Fail
EXT_ALM1
(Booster)
EXT_ALM2
(Donor Antenna)
EXT_ALM3
(System Component)
EXT_ALM 4
CriticalPoint
Page 174 of 210
 Wireless Access Product
Page 175 of 210
Home Small Cell
HNB-35,A01
•
•
•
8 Active Users 24 RRC connected user
Home Small Cell
Smart Integrated MIMO Antenna
Comba Home Small Cell Solution
LTE Home Small Cell provides cellular indoor coverage via broadband IP backhaul. It is suitable for small
hotspot indoor scenarios like home, small enterprise, office, business hall, Internet café, solving cellular
network issues including weak coverage, low data rate and site acquisition. It increases capacity for data
service and offloads macro network by absorbing traffic from indoor hotspots.
The Comba LTE Small Cell solution includes Home Small Cell, Gateway and NMS (Network
Management System). The architecture is shown in figure1.
Application Scenarios
•
•
•
•
•
In-building coverage
In-building data offload
Home, Small Enterprise wireless broadband
Small public hotspots
Emergency coverage
Product Features
•
•
•
•
•
Extends LTE mobile coverage to small, hard-to-reach areas
Supports up to 8 active users and 24 RRC connected users, ideal for small home/office, and small
public hotspots
Backhaul through fixed broadband; avoid CAPEX acquiring and building new sites, reduce OPEX
on backhaul transmission, power and operations
Support CSFB\VOLTE
Remote control and management through Network Management System (NMS), including software
upgrades and service activation
Page 176 of 210
Technical Specification
Electrical Specifications
Operating Frequency(MHz)
Band
TDD/FDD
Uplink(MHz)
Downlink(MHz)
1
FDD
1920-1980
2110-2170
3
FDD
1710-1785
1805-1880
40
TDD
2320-2370
RF Specifications
Bandwidth/Carrier
10/20 MHz
Max. Total Output Power
100mW 2x2 MIMO
DL=149Mbps, UL=50Mbps;
8 active users, 24 RRC users
Max Capacity
Sensitivity
-93.5 dBm
Listening band
Band1, band3 and band7
Synchronization
Air interface
IEEE 1588 ACR
Emission Mask
Spurious Emission
Compliant to 3GPPTS 36 104
Inter-modulation
Power, Mechanical and Environmental Specifications
Dimension
200mm ×152mm×58mm
Weight
< 1.0kg
Power Supply
+12V DC Input(Power Adaptor)
Power Consumption
<15W
Mounting Method
Desk top
Operating Temperature
-5Cto +40C
Cooling Method
Natural
Operating Humidity
10% to 90%
Storage Temperature
-40Cto 65C
IP Rating
IP30
Product Interface
Interface
WAN
( Electrical Port)
LAN
POWER
Function
RJ45
100/1000M Ethernet for backhaul
RJ45
10/100M for Fast Ethernet and Local Commissioning
Power Supply interface
+12V DC input
ON/OFF
Power on/off switch
RESET
Reset to manufacture setting
Page 177 of 210
Enterprise Small Cell
ENB-35
•
•
•
64 Active Users
Standalone Small Cell
Smart Integrated MIMO Antenna
Enterprise Small Cell Solution
Enterprise Small Cell can provide cellular indoor coverage via broadband IP backhaul. It is suitable for
small hotspot indoor scenarios like enterprise, office, business hall, Internet café, solving cellular network
issues including weak coverage, low data rate and site acquisition. It increases capacity for data service
and offloads macro network by absorbing traffic from indoor hotspots.
The Comba Enterprise Small Cell solution includes Small Cell, Gateway and NMS (Network
Management System). The architecture is shown in figure1.
Application Scenarios
•
•
•
•
•
In-building coverage
In-building data offload
Small Enterprise wireless broadband
Public hotspots
Emergency coverage
Product Features
•
•
•
•
•
•
Extends LTE mobile coverage to small, hard-to-reach areas
Supports up to 64 active users, ideal for small home/office, and small public hotspots
Backhaul through fixed broadband; avoid CAPEX acquiring and building new sites, reduce OPEX
on backhaul transmission, power and operations
Standard open interface enables easy integration with other vendors’ network elements
Support CSFB\VOLTE
Remote control and management through Network Management System (NMS), including software
upgrades and service activation
Page 178 of 210
Technical Specification
Electrical Specifications
Operating Frequency(MHz)
Band
TDD/FDD
Uplink(MHz)
Downlink(MHz)
1
FDD
1920-1980
2110-2170
3
FDD
1710-1785
1805-1880
40
TDD
2320-2370
RF Specifications
Bandwidth/Carrier
5/10/15/20 MHz
Max. Total Output Power
24dBm
Sensitivity
-93.5 dBm
Emission Mask
Spurious Emission
Compliant to 3GPP TS 36 104
Inter-modulation
Power, Mechanical and Environmental Specifications
Dimension
< 2L
Interface
RJ45
(WAN & Power Supply)
Weight
< 1kg
PoE+ or
+12V DC Input(Power Adaptor)
Power Supply
Power Consumption
< 14W
Mounting Method
Ceiling mounting or Wall mounting
Operating Temperature
-5Cto +40C
Cooling Method
Natural
Operating Humidity
15% to 85%
Storage Temperature
-40Cto 65C
IP Rating
IP20
Product Interface
Interface
Function
WAN(Optical Port)
SFP, Optical Port for backhaul
WAN(Electrical Port)
RJ45, Gigabit-Ethernet interface, backhaul & POE+ Power Supply
LAN
RJ45, 100Mbps Fast Ethernet, Local Commissioning port
SIM
SIM Card Interface, for Equipment authorization
POWER
GPS
Power Supply interface, +12V DC input
SMA, GPS Frequency and Time Synchronization input
Reserved Port
RJ45, Reserved
Page 179 of 210
Distributed Small Cell
4G Distributed Small Cell
Description
Distributed Small Cell is composed of CP (Center Point) and DP (Distributed Point) and AU (Access Unit),
providing cellular indoor coverage via broadband IP backhaul. It is suitable for small-to-medium indoor
scenarios like enterprise, office, business hall, Internet café, solving cellular network issues including
weak coverage, low data rate and site acquisition. It increases capacity for data service and offloads
macro network by absorbing traffic from indoor hotspots or buildings.
AU is the Access Unit of Distributed Small Cell for centralized signal processing and control. It connects
to EPC for S1 signalling processing.
CP is the center point of Distributed Small Cell system for distributed signal processing, routing and
broadcasting. To upper level, it connects to AU. To lower level, it connects to sub level CP via optical
cable (Daisy Chain connection) or/and connects to DP via Ethernet cable.
DP is the distributed point for cellular signal broadcasting. DP is directly connecting to CP with PoE+
(Power over Ethernet) rolling.
Main Features
•
•
•
•
•
•
•
•
Support 5MHz/10MHz/15MHz/20MHz bandwidth
Flexible solution for small-to-medium scenarios
IP-based backhaul, easy site acquisition
Plug and play, PoE+ power supply and IT Network-like deployment
Self-configuration and self-optimization
End-to-End control and management through Network Management System (NMS)
Software/hardware failure detection and recover
Intelligent power Saving
Application Scenarios
•
•
•
•
Small-to-Medium in-building coverage
In-building data offload
Enterprise wireless broadband
Emergency Telecommunications Service
Page 180 of 210
General Specification
DP(Distributed Point)
• Mini Distributed Point with internal antenna for LTE MIMO (2T2R)
•
•
•
•
•
Active Component: RF power software controllable, PoE+
Supporting FDD-LTE, TDD-LTE or UMTS
Supporting Band 1/2/3/4/7/40 (other bands can be customized)
Signaling control and processing
Remote control and monitoring
CP (Center Point)
•
•
•
•
Eight RJ45 for DP connection
Four SFP ports for daisy chain connecting
Software defined Switch & Converge & Processing
PSU(Power Supply Unit) for PoE+ supply
AU(Access Unit)
• Cloud RAN Design for Cell signal provision
•
•
•
GPS/1588V2 Synchronization
Electrical/Optical backhaul interface
Flexible capacity upgrade: Carrier Aggregation(CA)/Cell Splitting
Ubiquitous Coverage
Page 181 of 210
DP (Distributed Point)
Product Description
Through Cat5E or above cable, DP (Distributed Point) connects to CP (Center Point) and
serves as active cellular signal provision. Different DPs servers as an ideal solution for
small-to-medium scenario coverage.
Product Features
•
•
•
•
•
•
•
Extend LTE coverage to hard-to-reach areas
LTE 5MHz/10MHz/15MHz/20MHz
LTE MIMO 2 x 2 with interated Antenna
Support 2 UMTS Carriers(Optional)
Remote control and management through Network Management System (NMS), including software
upgrade, power configuration, alarm etc.
Plug and play, PoE+ power supply and IT Network-like deployment.
The distance between CP and DP can up to 100m by Cat5E or above cable
Technical Specification
Electrical Specifications
Operating Frequency(MHz)
TDD/FDD/UMT
S
Uplink(MHz)
Downlink(MHz)
1
FDD/UMTS
1920-1980
2110-2170
3
FDD
1710-1785
40
TDD
Band
1805-1880
2300-2370
RF Specifications
RF Module
Support
Bandwidth(MHz)
Max. Total
Output
Power
Sensitivity
Output
Accuracy
Power
Output Power Range
Emission Mask
Spurious Emission
Inter modulation
LTE
UMTS
5/10/15/20
5 x 2(Carriers)
24dBm(2x2 MIMO)
23dBm(SISO, 2Carriers)
-93.5 dBm @20MHz
N/A
±2dB
±2dB
20dB
N/A
Compliant to 3GPP TS 36 104
3GPP TS 25.106
FCC
Page 182 of 210
Technical Specification
Power, Mechanical and Environmental Specifications
6.7” x 6.7” x 1.8” (Single Mode)
(170mm x 170m x 46 mm)
8.3” x 8.3” x 1.8” (Dual Mode)
(210mm x 210m x 46 mm)
Dimension (L x W x H)
Interface
Weight
RJ45 * 2
< 0.5kg(Single Mode)
Power Supply
Power Consumption
< 0.8kg(Dual Mode)
PoE+
< 10W(Single Mode)
Mounting Method
< 18W(Dual Mode)
Ceiling mounting or Wall mounting
Operating Temperature
-5C to +45C
Cooling Method
Natural
Operating Humidity
15% to 85%
Storage Temperature
-40C to 65C
IP Rating
IP20
Page 183 of 210
CP (Center Point)
Product Description
CP (Center Point) is the center processing part
of Distributed Small Cell. It can greatly increase the Small Cell
coverage by daisy chain connection. Meanwhile,
it can switch, converge and compress the data for better Ethernet transition.
Product Features
•
•
•
•
•
•
8 extension ports (RJ45) for DP direct connection
4 level daisy chain connecting, extend the transmission distance up to 5km
PoE+ power supply
Signal switch, convergence and compress
NMS/EMS for remote management, including software downloading, upgrade, alarm, KPI report etc
1U size, easy installation on rack or wall mount
Technical Specification
Interfaces of CP
LAN1
LMT(Local Management Terminal 1, RJ45)
SFP1
Optical port to signal source 1
SFP2
Optical port to signal source 2
SFP3
Optical port for CP daisy chain
SFP4
Reserved
ETH1~ETH8
DP Connection Port, 8 x1000Mbps RJ45, software configurable
Power Socket
AC:100V - 240V (47Hz - 63Hz)
ON/OFF Switch
Power supply ON/OFF switch
Power, Mechanical, and Environmental Specifications
Total Dimension (L x W x H)
300mm x 240mm x 44mm
Weight
Power Supply
Mounting Method
< 3kg
AC: 110/220V (47Hz - 63Hz)
Rack mounting or Wall mounting
Operating Temperature
-5C to 40C
Cooling Method
Natural
Storage Temperature
-40C to 65C
Operating Humidity
15% to 85% (no condensation)
IP Rating
IP30
Page 184 of 210
AU (Access Unit)
Product Description
AU is a part of Distributed Small Cell which connects to core
network through IP interface and provides cellular signal
for users. It is mainly used in small-to-medium sized scenarios.
It actualizes ubiquitous coverage, improves its capability for
data service, and offloads macro network by absorbing traffic of hotspots.
Product Features
•
•
•
•
•
•
LTE 5MHz/10MHz/20MHz bandwidths
Wireless resource management, including congestion control, UE access control, power control,
ICIC etc
Various synchronization: air sniffer,1588V2 and GPS clock synchronization
Flexible IP backhaul such as Ethernet, PON or PTN etc
Support NMS management function, including remote software downloading upgrade, alarm, KPI
report etc.
1U size, easy installation on rack or wall mount
Technical Specification
System Specifications
Supported Users(LTE)
UMTS AU Feature
Interface
200 active users Or 400 RRC users
Input Signal range: -12±5 dBm
Downlink Gain: 35dB
Uplink Gain : 35dB
1 x RJ45 Port to WAN
1 x RJ45 Port to LAN
1 x RJ45 Port for Debug
1 x RJ45 Port to GPS
2 x SFP Port to CP
1 x SFP Port to WAN
1 x SFP Reserved
Power Switch
Mobility
Synchronization
Handover and reselection with Macro Cell and other Small Cell
Support 1588v2/GPS/A-GPS
Power, Mechanical, and Environmental Specifications
Dimension(H x W x D)
440mm x 370mm x 44mm(LTE)
482mm x 360mm x 44mm(UMTS)
Weight
Power Supply
< 6.5kg
External AC/DC adaptor 110/240-VAC
Power Consumption
45W
Mounting method
Free standing, wall mounting
LAN Interface
100Mbps Ethernet port
LED Indicators
POWER/RUN/LTE(UMTS) Traffic /GPS STATUS
Operating Temperature
-5C to +40C
Operating Humidity
15% to 85%
IP Rating
IP30
Page 185 of 210
5G Distributed Small Cell
Description
Comba 5G open-platform small cell is a small, low-power, distributed base station system, which
adopts digital technology and fiber infrastructure, providing 5G indoor coverage signal. Mainly used in
office buildings, shopping malls, university campuses, hospitals, hotels, parking and other indoor scenes,
to achieve accurate and deep coverage of indoor 5G signal and capacity.
The 5G open-platform small cell system consists of 5G Access Unit (AU), Switch Unit (SW) and
Distribution Point (DP). The AU and the SW are connected by optical fibers, and the SW and the DP are
connected by a hybrid power fiber cable, as shown in Figure 1.
DP1
SW1
1
AU
SW2
DP8
2
3
4
Fig. 1 5G open-platform Small Cell System Architecture
Overall System Features
1)
Support 5G data and voice service;
2)
Support 5G NR wireless resource management and mobility management;
3)
The Switch Unit supports 2 level of cascade;
4)
Each Switch Unit can connect to 8 Distribution Points through hybrid power fibers cable
providing power and data to the Distribution Point;
5)
Flexible cell splitting and combining without infrastructure change;
6)
Support GPS, BDS (BeiDou Navigation Satellite System), 1588v2 clock synchronization;
7)
Support equipment software remote upgrade, remote monitoring, topology rendering, alarm and
KPI reporting and other network management functions.
Page 186 of 210
5G AU (Access Unit)
Technical specifications
5G Access Unit Appearance
Main Features
1)
Support NSA and SA 5G deployment options;
2)
Support 5G data and voice service;
3)
Maximum 100MHz Channel Bandwidths;
4)
Support access control, congestion control, power control and other wireless resource
management functions;
5)
Support the connection of Switch Unit and Distribution Point to achieve the extension of
coverage;
6)
Support mobile management functions such as switching and reselection between systems in
support system;
7)
Support abnormal indication of equipment and control of access unit;
8)
Support the configuration, query and upgrade of Switch Unit and Distribution Point;
9)
Software remote download upgrade, alarm and KPI reporting and other network management
operation functions.
Page 187 of 210
Key Technical Specifications
Category
Key technical specifications
Performance and specifications
Networking
Capability
4 Switch Units are supported for star connection.
Support for connecting 64 Distribution Points through 8 Switch Units.
3GPP
Support 3GPP F40 and subsequent protocol upgrades;
User capacity
Each cell supports 400 active users and 1200 RRC connected users
Maximum
throughput
data
Single cell downlink peak rate: 1.5Gbps @256QAM, 4 layers
Single cell uplink peak rate: 285Mbps @64QAM, 2 layers
Cell Capacity
4 cells / 2T2R; 2 cells / 4T4R
Channel Bandwidth
MIMO
50/60/80/100MHz
2T2R, 4T4R
Support GPS, BDS (BeiDou Navigation Satellite System), 1588v2 clock
synchronization
Adopts 19 "standard frame, 1 U in height and 410 mm in depth.
DC-48 VDC (-40V~-57V) or AC 220V power supply
Synchronization
Size
Power supply
Environmental
protection
Installation method
Cooling
Operation
temperature
Operation
relative
humidity
Protection Level: IP20
Rack or wall mounted
Passive
-5℃～+45℃
15%-85% (no condensation)
Page 188 of 210
5G SW (Switch Unit)
Figure 3. Switch Unit appearance
Main Features
⚫
Support maximum 8 Distribution Points;
⚫
Power supply to Distribution Point by hybrid power fibers cable;
⚫
Supports second level cascade;
⚫
The combination of the upstream signal and the broadcasting of the downstream signal to each
Distribution Point.
⚫
Software remote download and upgrade, remote monitoring and other network management
operation functions;
⚫
LEDs status indication.
Technical Specifications
Category
System Processing
Capability
Upstream
signal
aggregation
Downlink
signal
broadcasting
Remote
power
supply
Cooling
Installation method
Volume
Weight
Power supply
Environmental
Protection
Operation
temperature
Operation
relative
humidity
Key Technical specifications
Performance and specifications
Supporting access to 8 DP stations for each SW, system supporting 2
level of SW cascading.
Supports the combination of the upstream IQ data of the connected
DPs and the IQ data of the cascaded lower SW.
Broadcasting the downlink signal to the connected DPs and the
cascaded lower SW
Supporting remote power supply to DP via hybrid power fibers.
Passive
Rack or wall mounted
< 12L
< 10kg
AC 220V power supply input; supports - 48V DC power supply to
Distribution Point
Protection Level IP30
-5℃～+45℃
15%-85%(no condensation)
Page 189 of 210
5G DP (Distribution Point):
5G Distribution Point appearance
Main Features
⚫
Supporting NR N41 and N78 bands
⚫
Support NR 50/60/80/100MHz channel bandwidth;
⚫
Support 2T2R, 4T4R;
⚫
LEDs indicating the status of equipment.
⚫
Network management operation functions such as remote download and upgrade of soft
ware, parameter setting, alarm and KPI reporting.
⚫
Plug and Play, supporting the remote power supply by hybrid power fibers and self-confi
guration function, fast commissioning and simple maintenance.
⚫
Support external Bluetooth module.
Technical Specifications
Key Technical specifications
Performance and Specifications
N41
2515MHz~2675MHz
Category
Operation
Frequency
Channel bandwidth
N41
N78
60MHz/80MHz/100MHz
50MHz/100MHz
N41
2x2
N78
4x4 / 2x2
N41
N78
2*250mW
4*250mW / 2*250mW
MIMO
Maximum
power
N78
3400MHz~3600MHz
transmit
Size
< 2.5L
weight
< 2.5kg
Power supply
Environmental
Protection
Installation method
-48V DC Power Supply by Hybrid power fibers
Cooling
Operation
temperature
Operation
relative
humidity
Passive
Protection Level IP31
Ceiling or wall mount
-5℃~+55℃
15%~85% (no condensation)
Page 190 of 210
5G Indoor CPE
CP2600-IP, A30
5G NR Sub-6G n41/n77/n78n/79
LTE low band 5/8/18/19/20/26/28
LTE middle band 1/3/7/32/34/38/39/40/41
LTE high band 42
4 x 4 MIMO
Up to 2.5Gbps download speed
Wi-Fi 802.11 a/b/g/n/ac, 4 x 4 MIMO
Product Description
CP2600-IP, A30 is a high-performance indoor customer-premises equipment(CPE)supporting 5G NR
Sub-6G and 4G LTE radio interface. It works on 5G NR frequency bands from 700MHz to 5000MHz and
LTE frequency bands from 700 MHz to 3600 MHz, delivering Gigabit peak downlink user throughput.
Supporting both 5G NR NSA and SA architecture, the CP2600-IP, A30 CPE enables mobile operators to
rollout 5G network and deliver “fiber-like” Fixed Wireless Access (FWA) service rapidly. It is fully 3GPP
compliant and supports advanced 5G and 4G NR radio features such as 4x4 MIMO, CA (Carrier
Aggregation), and DL 256QAM.
CP2600-IP, A30 CPE has built-in Wi-Fi router compliant with latest 802.11 standards, it also supports
VoLTE services.
Comba 5G NR CPE series supports remote configuration and management through Comba NMS
(Network Management System) or operator’s ACS (Automatic Configuration Server).
Product Features
Support NSA and SA network
Integrated 4G and 5G NR antenna
Support TDD-LTE & FDD-LTE
Support DSS (Dynamic Spectrum Sharing) and optional LAA (Licensed Assisted Access)
Support TR-069 remote management protocol
Auto Band Selection
Support IPv4/6
Support IEEE802.11 a/b/g/n/ac
Provided VoLTE Interface
User-friendly operation indicator on top of device
Plug and play, zero touch commission through web user interface
Application
Page 191 of 210
Product Specification
Radio Interface
Frequency Band
TRX
Tx Power
MIMO
Modulation
5G NR Sub 6G:
n41 (UL/DL: 2469 – 2690MHz)
n77 (UL/DL: 3300 – 4200MHz)
n78 (UL/DL: 3300 – 3800MHz)
n79 (UL/DL: 4400 – 5000MHz)
LTE-FDD Band1 (UL: 1920MHz – 1980MHz / DL: 2110MHz –
2170MHz)
LTE-FDD Band3 (UL: 1710MHz – 1785MHz / DL: 1805MHz –
1880MHz)
LTE-FDD Band5 (UL: 824MHz – 849MHz / DL: 869MHz – 894MHz)
LTE-FDD Band7 (UL: 2500MHz – 2570MHz / DL: 2620MHz –
2690MHz)
LTE-FDD Band8 (UL: 880MHz - 915MHz / DL: 925MHz - 960MHz)
LTE-FDD Band18 (UL: 815MHz - 830MHz / DL: 860MHz - 875MHz)
LTE-FDD Band19 (UL: 830MHz - 845MHz / DL: 875MHz - 890MHz)
LTE-FDD Band20 (UL: 832MHz – 862MHz / DL: 791MHz – 821MHz)
LTE-FDD Band26 (UL: 814MHz – 849MHz / DL: 859MHz – 894MHz)
LTE-FDD Band28 (UL: 703MHz – 748MHz / DL: 758MHz – 803MHz)
LTE-FDD Band32 (DL: 1452MHz – 1496MHz)
LTE-TDD Band34 (UL/DL: 2010MHz – 2025MHz)
LTE-TDD Band38 (UL/DL: 2570MHz – 2620MHz)
LTE-TDD Band39 (UL/DL: 1880MHz – 1920MHz)
LTE-TDD Band40 (UL/DL: 2300MHz – 2400MHz)
LTE-TDD Band41 (UL/DL: 2496MHz – 2690MHz)
LTE-TDD Band42 (UL/DL: 3400MHz – 3600MHz)
5G: 2T4R (n41), others 5G band: 1T4R
4G: 1T4R
5G: 26dBm
LTE: 23dBm
5G NR: DL: 4x4 MIMO; UL: 2x2 MIMO
LTE: DL: 4x4 MIMO; UL: SISO
DL: 256QAM, UL: 64QAM
Power, Mechanical, and Environmental
Product Size (H x W x D)
200mm x 110mm x 110mm
Package Size (H x W x D)
290mm x 200mm x 190mm
Weight
<2 kg
CPE Power Consumption
<25W
Operating Temperature
0~45°C
Operating Humidity
0~95%
IP Rating
IP 31
WI-FI
Standard
Frequency Band
Tx/Rx Path
Channel Bandwidth
IEEE 802.11 a/b/g/n/ac
2.4GHz +5.8GHz
4T4R
20MHz & 40MHz & 80MHz
Built-in Antenna Specification
Item
Operating Frequency
Average Gain
Low Band
700 MHz ~ 960 MHz
1 dBi
Middle Band
High Band
1700 MHz ~ 2690 MHz
4 dBi
3300 MHz ~ 3800 MHz
4 dBi
Page 192 of 210
Software Feature
Language Settings:
English
Router Mode
GUI based Web Configuration
DHCP Server
NAT
IPV4/IPV6 Dual Stack
TR-069
Firewall
VoLTE
Software Upgrade
Device Interface and Indicator
Interface Summary
Built-in Antenna
LED
Button
Power Supply
(Adaptor)
1000/100/10Mbps ETH RJ45 LAN Port x 2
10000/1000/100/10Mbps ETH RJ45 LAN/WAN Port x 1
RJ11 Voice Interface x 1
2FF Standard SIM Card Slot x 1
Power DC Port x 1
External Antenna Port x 1
USB 3.0 Port x 1
Integrated Omni antennas
Power Indication
4G & 5G Signal Strength
Wi-Fi Indication LED
WPS Button
Reset Button
Input range: 100~240V AC
Output: 12V/3A DC
Page 193 of 210
Outdoor CPE
CP2600-OP, A10
TDD-LTE & FDD-LTE
Outdoor Pole/Wall Mounting
PoE Power Supply
Product Description
CP2600-OP, A10 is one of Comba LTE-CPE Series Product. It combines a robust IP-65 compliant
enclosure with an LTE core supported Release 11 Category 6 along with an integrated high-gain dual
polarization directional antenna. Easy implement LTE coverage extension. It can supply stable, fast, and
easy network access for you.
Product Features
•
•
•
•
•
Integrated High Gain Antenna
Support PoE Power Supply
Support Band Locking
IP65 Structural Design
Web-based User Interface & TR069 Protocol for remote management
Product Specification
LTE Standard
Mode
Protocol
Date Rate
20MHz)
Radio
TDD-LTE & FDD-LTE
Release11 Category6 & IPv4/v6
(DL:UL=3:1,
Operating Frequency
Antenna
Output Power
Carrier Aggregation Ability
Tx/Rx Path
Channel Bandwidth
Tx Power
Rx Sensitivity
& DHCP
Downlink Rate 200Mbps/Uplink Rate 10Mbps
LTE-FDD Band 2:
(UL: 1850MHz-1910MHz DL: 1930MHz-1990MHz)
LTE-FDD Band 3:
(UL: 1710MHz-1785MHz DL: 1805MHz-1880MHz)
LTE-FDD Band7:
(UL: 2500MHz-2570MHz DL: 2620MHz-2690MHz)
LTE-FDD Band 28B:
(UL: 718MHz-748MHz
DL: 773MHz- 803MHz)
LTE-TDD Band42:
(UL/DL: 3400MHz-3600MHz)
1T2R, Dual-polarization (Vertical/ Horizontal)
23dBm ± 2dBm
35MHz FDD-LTE 2CC CA
40MHz TDD-LTE 2CC CA
1 Tx 2 Rx
5/10/15/20 MHz
23dBm +/- 2dBm
-94dBm (20MHz@QPSK)
Page 194 of 210
Product Specification
Physical Specification
Total Dimension
(L x W x H, approx)
Weight
260mm x 149mm x 72mm
CPE Power Consumption
0.7kg
Input 100 VAC - 240VAC, 50Hz - 60Hz Output 24V, 500mA
(PoE)
< 7W
Operating Temperature
-40°C to 55°C
Operating Humidity
0% to 95%
Power Adapter
IP Rating
Software Specification
Language Settings: English, Spanish
and Portuguese
Support NAT/Router mode
Support the http or https web server
PIN
Management,
SIM
card
Authentication
Support multi-APN
IP65
Language Settings: English, Spanish and Portuguese
Support NAT/Router mode
Support the http or https web server
PIN Management, SIM card Authentication
Support multi-APN
Support VPN
Support VPN
Ipv6/Ipv4 dual stack
Support preferred band and frequency
Support NTP Synchronization
Ipv6/Ipv4 dual stack
Support preferred band and frequency
Support NTP Synchronization
Device Interface
USIM
LAN1/POE
USIM card slot
Use for LAN connecting and power supplying
RST
Restore factory setting
Page 195 of 210
CP2600-OP, A20
Middle Band 2/66
High Band 42/43/48
3GPP Release 12 Cat 15
Up to 80MHz Carrier Aggregation
4 x 4 MIMO
Up to 800Mbps download speed
Product Description
CPE (Customer Premise Equipment) is the integrated wireless broadband access equipment. It
combines a robust IP-65 compliant enclosure along with an integrated high-gain dual polarization
directional antenna.
Comba CP2600-OP, A20 CPE can provide high date rates with up to 80MHz carrier aggregation. It
supports smart antennas with MIMO technology, combining advantaged RF design, and highly integrated
software features and friendly web-based interface.
Product Features
•
•
•
•
•
•
•
•
•
Support TDD-LTE & FDD-LTE
Easy deployment for wall/pole mount
Auto Band Selection
Support IPv4/6
Plug and play, zero touch commission
Web-based friendly Interface
Lightning protection
TR069 NMS management
High throughput for data access
Application Scenario
•
•
•
Non-ideal for copper/fiber cable deployment due to ROI or roll-out difficulty
FWA Service
For rural coverage, high performance terminal is needed to improve network coverage and capacity
LTE Specification
CPE
Internet
PoE Injector
Core network
IDU
(RJ45/RJ11/WiFi)
Page 196 of 210
Standard
3GPP Release 12, Category 15
TDD: Band42 (UL/DL: 3400MHz – 3600MHz)
TDD: Band43 (UL/DL: 3600MHz – 3800MHz)
TDD: Band48 (UL/DL: 3550MHz – 3700MHz)
FDD: B2 (UL:1850MHz – 1910MHz; DL:1930MHz – 1990MHz)
FDD: B66 (UL:1710MHz – 1780MHz; DL:2110MHz – 2200MHz)
Rx CA 20+20+20+20 MHz (DL 2x2 MIMO)
Rx CA 20+20 MHz (DL 4x4 MIMO)
Tx CA 20+20MHz (SISO)
2T4R
DL 4x4 MIMO
UL 2x2 MIMO
DL 256QAM
UL 64QAM
5/10/15/20 MHz
23dBm
-95dBm (10MHz@QPSK)
800Mbps
Frequency Band
Carrier Aggregation Ability
TRX
MIMO
Modulation
Channel Bandwidth
Tx Power per path
Sensitivity
Max. Throughput
Product Specification
Power, Mechanical, and Environmental Specifications
149mm x 260mm x 72mm
Product Dimension (W x H x D)
Package Size (W x H x D)
907mm x 350mm x 360mm
Weight
<1Kg
Input 100 VAC~240VAC, 50Hz~60Hz
Power Adapter
Output 24V, 500mA (PoE)
CPE Power Consumption
Max. 12W
Operating Temperature
-30~55°C
Operating Humidity
0~95%
IP Rating
IP65
Software Specification
Language Settings: English
Support Bridge Mode/Router Mode
Support VPN in router mode
PIN Management
Support multi-APN +VLAN on bridge mode
IPV6/IPV4 dual stack at WAN
lock Cell, lock band and lock PLMN
Support NTP Synchronization
Mac and IP filter
Device Management Specification
Local Configuration
Web based Configuration
Full/Partial image upgrade
Software Upgrade
Local/Remote Upgrade
Support the ping and signaling trace
Diagnostics
TR-069
NMS Interface
Antenna Gain Specifications
Item
Operating Frequency
Average Gain(dBi)
Middle Band
1710MHz ~2700MHz
7
High Band
3400MHz ~3800MHz
7
*Horizontal plane half power beam-width: 60°Vertical plane half power beam-width: 60°
Page 197 of 210
CP2600-OP, A21
High Band 42/43/48
3GPP Release 12 Cat 15
Up to 80MHz Carrier Aggregation
4 x 4 MIMO
Up to 580Mbps download speed
Product Description
CPE (Customer Premise Equipment) is the integrated wireless broadband access equipment. It
combines a robust IP-65 compliant enclosure along with an integrated high-gain dual polarization
directional antenna.
Comba CP2600-OP, A21 CPE can provide high date rates with up to 80MHz carrier aggregation. It
supports smart antennas with MIMO technology, combining advantaged RF design, and highly integrated
software features and friendly web-based interface.
Product Features
•
•
•
•
•
•
•
•
•
•
Support TDD-LTE
Easy deployment for wall/pole mount
Auto Band Selection
Support IPv4/6
Plug and play, zero touch commission
Web-based friendly Interface
Lightning protection
High gain embedded antenna
TR069 NMS management
High throughput for data access
Application Scenario
•
Non-ideal for copper/fiber cable deployment due to ROI or roll-out difficulty
•
FWA Service
•
For rural coverage, high performance terminal is needed to improve network coverage and
capacity
CPE
Internet
PoE Injector
Core network
IDU
(RJ45/RJ11/WiFi)
Page 198 of 210
Product Specification
LTE Specification
Standard
3GPP Release 12, Category 15
LTE-TDD Band42 (UL/DL: 3400MHz – 3600MHz)
LTE-TDD Band43 (UL/DL: 3600MHz – 3800MHz)
LTE-TDD Band48 (UL/DL: 3550MHz – 3700MHz)
Rx CA 20+20+20+20 MHz (DL 2x2 MIMO)
Rx CA 20+20 MHz (DL 4x4 MIMO)
Tx CA 20+20MHz (SISO)
2T4R
DL 4x4 MIMO
UL 2x2 MIMO
DL 256QAM
UL 64QAM
5/10/15/20 MHz
23dBm
-96dBm (10MHz@QPSK)
580Mbps
Frequency Band
Carrier Aggregation Ability
TRX
MIMO
Modulation
Channel Bandwidth
Tx Power per path
Sensitivity
Max. Throughput
Power, Mechanical, and Environmental Specifications
300mm x 300mm x103mm
Product Dimension (W x H x D)
Package Size(W x H x D)
390mm x 390mm x 180mm
Weight
<2Kg
Input 100 VAC~240VAC, 50Hz~60Hz
Power Adapter
Output 24V, 500mA (PoE)
CPE Power Consumption
Max. 10W
Operating Temperature
-30~55°C
Operating Humidity
0~95%
IP Rating
IP65
Software Specification
Language Settings: English
Support Bridge Mode/Router Mode
Support VPN in router mode
PIN Management
Support multi-APN +VLAN on bridge mode
IPV6/IPV4 dual stack at WAN
lock Cell, lock band and lock PLMN
Support NTP Synchronization
Mac and IP filter
Device Management Specification
Local Configuration
Web based Configuration
Full/Partial image upgrade
Software Upgrade
Local/Remote Upgrade
Support the ping and signaling trace
TR-069
Diagnostics
NMS Interface
Antenna Gain Specifications
Item
Operating Frequency
Average Gain(dBi)
High Band
3400MHz ~3800MHz
13
*Horizontal plane half power beam-width: 60°Vertical plane half power beam-width: 20°
Page 199 of 210
5G Outdoor CPE
CP2600-OP, A31
5G NR Sub-6G n41/n77/n78/
LTE low band 5/8/18/19/20/26/28
LTE middle band 1/3/7/32/34/38/39/40/41
LTE High band 42
4 x 4 MIMO
Up to 2.5Gbps download speed
Product Description
CP2600-OP, A31 is a high-performance outdoor Customer-Premises Equipment(CPE)supporting 5G NR
Sub-6G and 4G LTE modulation capacity. The device houses high-gain dual polarization directional
antenna across 4x4 MIMO array. It works on 5G NR Sub-6G frequency bands from 700MHz to 3800MHz
and LTE frequency bands from 700 MHz to 3600 MHz, delivering Gigabit peak downlink user throughput.
Supporting both 5G NR NSA and SA architecture, the CP2600-OP, A31 CPE enables mobile operators to
rollout 5G network and deliver “fiber-like” Fixed Wireless Access (FWA) service rapidly. It is fully 3GPP
compliant and supports advanced 5G and 4G NR radio features such as 4x4 MIMO, CA (Carrier
Aggregation) and DL 256QAM.
Comba 5G NR CPE series supports remote configuration and management through Comba NMS
(Network Management System) or operator’s ACS (Automatic Configuration Server).
Product Features
•
•
•
•
•
•
•
•
•
•
•
Support NSA and SA network
Integrated 4G and 5G NR antenna
Support TDD-LTE & FDD-LTE
Support DSS (Dynamic Spectrum Sharing) and optional LAA (Licensed Assisted Access)
Support GPS Positioning for CPE location
Support TR-069 remote management protocol
Easy deployment for wall/pole mount
Auto Band Selection
Support IPv4/6
Robust outdoor IP65 design with built-in lightning protection
Plug and play, zero touch commission through web user interface
Application
•
•
FWA for rural, suburban and urban household and SMEs where fixed broadband is
economically not feasible
Meet high service requirements and best for rural coverage due to better link budget than indoor
CPE
Page 200 of 210
Product Specification
Radio Interface
Frequency Band
TRX
Tx Power
MIMO
Modulation
5G NR Sub 6G:
n41 (UL/DL: 2469 – 2690MHz)
n77 (UL/DL: 3300 – 4200MHz)
n78 (UL/DL: 3300 – 3800MHz)
LTE-FDD Band1 (UL: 1920MHz – 1980MHz / DL: 2110MHz – 2170MHz)
LTE-FDD Band3 (UL: 1710MHz – 1785MHz / DL: 1805MHz – 1880MHz)
LTE-FDD Band5 (UL: 824MHz – 849MHz / DL: 869MHz – 894MHz)
LTE-FDD Band7 (UL: 2500MHz – 2570MHz / DL: 2620MHz – 2690MHz)
LTE-FDD Band8 (UL: 880MHz - 915MHz / DL: 925MHz - 960MHz)
LTE-FDD Band18 (UL: 815MHz - 830MHz / DL: 860MHz - 875MHz)
LTE-FDD Band19 (UL: 830MHz - 845MHz / DL: 875MHz - 890MHz)
LTE-FDD Band20 (UL: 832MHz – 862MHz / DL: 791MHz – 821MHz)
LTE-FDD Band26 (UL: 814MHz – 849MHz / DL: 859MHz – 894MHz)
LTE-FDD Band28 (UL: 703MHz – 748MHz / DL: 758MHz – 803MHz)
LTE-FDD Band32 (DL: 1452MHz – 1496MHz)
LTE-TDD Band34 (UL/DL: 2010MHz – 2025MHz)
LTE-TDD Band38 (UL/DL: 2570MHz – 2620MHz)
LTE-TDD Band39 (UL/DL: 1880MHz – 1920MHz)
LTE-TDD Band40 (UL/DL: 2300MHz – 2400MHz)
LTE-TDD Band41 (UL/DL: 2496MHz – 2690MHz)
LTE-TDD Band42 (UL/DL: 3400MHz – 3600MHz)
5G: 2T4R
4G: 1T4R (onlyB1/3/7/38/41)
Others 4Gband: 1T2R
5G: 26dBm
LTE: 23dBm
5G: DL 4x4 MIMO; UL: 2x2 MIMO
LTE: DL 4x4 MIMO (onlyB1/3/7/38/41),
others 4G band: 2 x 2 MIMO
; UL: SISO
DL: 256QAM, UL: 64QAM
Power, Mechanical and Environmental
Product Size (H x W x D)
300mm x 300mm x 103mm
Package Size (H x W x D)
390mm x 390mm x 180mm
Weight
<2kg
CPE Power Consumption
<25W
Working Temperature
-40~55°C
Operating Humidity
0~95%
IP Rating
IP65
Software Feature
Language Settings: English
Bridge mode & Router mode
GUI based Web Configuration
DHCP Server
NAT
IPV4/IPV6 Dual Stack
TR-069
Firewall
Software Upgrade
Page 201 of 210
Built-in Antenna Specification
Item
Operating Frequency
Average Gain
Low Band
700 MHz ~ 960 MHz
3 dBi
Middle Band
High Band
* Remark: Tolerance is ± 1dBi.
1700 MHz ~ 2690 MHz
8 dBi
3300 MHz ~ 3800 MHz
10 dBi
Device Interface and Indicator
1000/100/10 Mbps ETH RJ45 LAN Port x 1
Or 10000/1000/100/10 Mbps ETH RJ45 LAN Port x 1 (Optional)
2FF Standard SIM Card Slot x 1
Antenna
Internal Antenna
Power Indication
4G & 5G Signal Strength
LED
SIM Indication
4G & 5G Link status LED
Button
Reset button
Power Supply
PoE DC 48V/0.6A
* Remark: 10000/1000/100/10 Mbps ETH RJ45 LAN port is for optional only and GA product is not
support.
Interface Summary
Page 202 of 210
Coverage Management System
CMS V8.19.4
Features
•
•
•
•
•
•
•
•
•
Complete Management Platform forwireless enhancement
products (NE, Network Elements) including repeaters, DAS and
etc.
Real time alarm collection with Alarm history log.
Real-time or scheduled query for parameters configuration and
status update.
Scheduled batch processing of commands.
North Bound Interface (NBI) for integration with other EMS or NMS with SNMP (v2c, v3).
Support SMS or IP-based communication mode. Optional interface to SMS Center (SMPPv3.3 or
3.4). Support alarm forwarding to cellular device handset via SMS or email.
Optional Electronic Map Interface (need local eMap geographical data, SHP format).
Support Browser – Server configuration over TCP/IP
Running on standard Server platform. Utilizing proven Microsoft SQL database to achieve scalable,
reliable and secure architecture.
Functional Block Diagram
CMS consists of web server, application server, communication server and northbound interface which
are software modules installed in one physical server hardware.
Terminal
Terminal
Terminal
Terminal
Carrier Central
NMS
Firewall
Application Server
Northbound Interface
( via SNMP trap)
Web Server
Communication Server
Off-air
Repeater
DAS
ComFlex
Microwave
Equipment
Page 203 of 210
RET
Antenna
...
Specifications
CMS specifications may be varied depending on several factors such as hardware and software
configuration levels and performance variance, NE Qty, communication mode, data transmission link
performance, even running time and etc. Below specifications are typical values based on Comba
operational experiences. These specifications may have some variance during actual operations.
CMS Capacity
NE Qty
10000, under recommended HW & SW configuration
NE data in database
Concurrent login user Qty
One year data
Maximum 50, recommended 15 for a better performance
CMS Performance
10 per second
Data Packet Decoding Speed
System Response Period
Polling Speed
2s (normal operation), 5s (mass data processing)
10000 NEs per hour, under SMSC communication mode
30000 NEs per hour, under PSD communication mode
Communication mode between CMS and monitored NEs
•
•
•
•
SMS. With SMS mode, devices must be equipped with inside modems to send/receive SMS to/from
CMS; and CMS also must be equipped with a modem or directly connecting with SMS
Center/gateway to send/receive SMS to/from devices.
Packet Switched Data (PSD), such as GPRS, CDMA 1x, HSDPA, etc. With PSD mode, devices
must be equipped with inside modems, and inserted with a PSD enabled SIM/UIM/USIM.
Ethernet. With this mode, devices must be equipped with inside Network Interface Card (NIC).
Circuit Switched Data (CSD) isn’t supported.
North-Bound Interface
Currently CMS supports below NBI to transfer CMS information to other EMS/NMS.
• SNMP Trap, Email, SMS for alarm forwarding.
•
Timely Performance/Inventory file for performance/inventory management.
System Requirements
CMS Server Recommended Hardware Requirements
Processor
Intel Xeon E7-2870
Memory
16GByte
Hard disk
500GByte
Network
2 x 100/1000M NIC
Serial Ports
At least one available Serial Port
CMS Server Software Requirements
Operating System
Windows Server 2016 64bit
Supported DatabaseApplications
Microsoft SQL Server 2016
CMS Installation Requirements
For the installation of CMS, the CMS server should be open for remote access.
Page 204 of 210
CMSGUI
Page 205 of 210
Contact Information
Website:
www.comba.com.cn
Address: Shenzhou Road 10th, Guangzhou, China.
Page 206 of 210