PREPARING BOOTABLE INSTALLER AND INSTALL OPERATING SYSTEM
CREATING BOOTABLE FLASH DRIVE (FOR CLIENT-PC)
1. CMD (RUN AS ADMINISTRATOR)
2. TYPE:
diskpart
list disk
select disk 1
clean
create partition primary
select partition 1
active
format fs=ntfs quick (wait until 100% completed)
assign
exit
exit
3. Copy the files (not the folder) of OS and paste it to the flash drive.
INSTALLING WINDOWS
1. Restart the computer (PRESS F2, F10, F12, OR DELETE to enter BIOS setup)
2. Select the bootable flash drive
3. Wait to install the windows
4. Select driver options
5. Delete the all storage
6. Select new
7. Divide the storage
8. Select unallocated space
9. Select new
10. Apply
11. Next then wait
SET-UP COMPUTER NAME (note computer name must be DESKTOP)
1. Go to computer
2. Right click properties
3. Change settings
4. Change name of computer
5. Apply then OK
INSTALLING WINDOWS SERVER OPERATING SYSTEM
FORMATTING SERVER-PC
1. Insert the disk server bootable installer
2. Restart The Computer (Press F2, F10, F12, OR DELETE to enter BIOS setup)
3. Then go to boot setting
4. Select CD – DVD bootable
5. Then f10 to save & exit
6. Wait
7. Install now.
8. Select window server r8 64bit or select 1
9. Next
10. Select option driver
11. Delete storage
12. New
13. Apply
14. Next
15. Wait until finish
16. Set-up password then ok
17. Then take out the disk server
SET-UP COMPUTER NAME (note computer name must be SERVER)
1. Go to computer
2. Right click properties
3. Change settings
4. Change name of computer
5. Apply then ok