Fortinet NSE 6 FortiSwitch
NSE6_FSW-7.2
Certification Study Guide
Fortinet NSE6_FSW-7.2 Exam Details, Syllabus and Questions
www.NWExam.com
Get complete detail on NSE6_FSW-7.2 exam guide to crack Fortinet NSE 6 FortiSwitch 7.2. You can collect all information on NSE6_FSW-7.2 tutorial,
practice test, books, study material, exam questions, and syllabus. Firm your
knowledge on Fortinet NSE 6 - FortiSwitch 7.2 and get ready to crack
NSE6_FSW-7.2 certification. Explore all information on NSE6_FSW-7.2 exam
with number of questions, passing percentage and time duration to complete
test.
WWW.NWEXAM.COM
PDF
Fortinet NSE 6 FortiSwitch NSE6_FSW-7.2
Certification Study Guide
Fortinet NSE6_FSW-7.2 Certification Exam Details
Fortinet NSE6_FSW-7.2 certifications are globally accepted and add significant value to
any IT professional. The certification gives you a profound understanding of all the
workings of the network models and the devices that are utilized with it. NWExam.com
is proud to provide you with the best Fortinet Exam Guides.
The Fortinet NSE6_FSW-7.2 Exam is challenging, and thorough preparation is essential
for success. This cert guide is designed to help you prepare for the NSE 6 FortiSwitch
certification exam. It contains a detailed list of the topics covered on the Professional
exam. These guidelines for the NSE 6 FortiSwitch will help guide you through the study
process for your certification.
To obtain Fortinet NSE 6 - FortiSwitch 7.2 certification, you are required to pass the
NSE 6 FortiSwitch NSE6_FSW-7.2 exam. This exam is created keeping in mind the
input of professionals in the industry and reveals how Fortinet products are used in
organizations across the world.
NSE6_FSW-7.2 NSE 6 FortiSwitch Sample Questions
1
WWW.NWEXAM.COM
PDF
NSE6_FSW-7.2 Fortinet NSE 6 - FortiSwitch 7.2 Exam
Summary
●
●
●
●
●
●
●
●
●
Exam Name: Fortinet NSE 6 - FortiSwitch 7.2
Exam Code: NSE6_FSW-7.2
Exam Price: $200 USD
Duration: 70 minutes
Number of Questions: 32
Passing Score: Pass / Fail
Exam Registration: PEARSON VUE
Sample Questions: Fortinet NSE6_FSW-7.2 Sample Questions
Recommended Practice: Fortinet Certified Professional - Network Security
Practice Test
● Recommended Training: FortiSwitch
Topics covered in the Fortinet NSE 6 FortiSwitch NSE6_FSW7.2 Exam
Section
Objectives
- Manage FortiSwitch over FortiLink
- Deploy and provision FortiSwitch
Manage and Provision
- Use FortiCloud to manage FortiSwitch
FortiSwitch
- Deploy and manage FortiSwitch in standalone mode
- Configure SVI and dynamic routing on FortiSwitch
- Deploy FortiSwitch supported deployment topologies
- Select a suitable FortiSwitch model
- Deploy and configure FortiSwitch in a multi-tenancy
environment
Network planning and
- Differentiate available FortiSwitch management operation
design
modes
- Configure STP to prevent network loops
- Configure switch ports, split port, and available
transceivers
- Deploying VLANs using FortiSwitch
- Use IGMP QoS and LLDP-MED on FortiSwitch
FortiSwitch essentials and
- Configure the ports required for stack deployment
fundamentals
- Implement switching and routing on available FortiSwitch
devices
- Use port security options on FortiSwitch
Layer 2 control and
- Use available filtering and antispoofing techniques on
security
FortiSwitch
- Use integrated and quarantine options to protect the
NSE6_FSW-7.2 NSE 6 FortiSwitch Sample Questions
2
WWW.NWEXAM.COM
PDF
Section
Objectives
network
- Use ACLs, security profiles, and VLAN security
mechanisms on FortiSwitch
- Use SNMP and sFlow to monitor FortiSwitch and ports
- Configure and use different packet sampling options
FortiSwitch monitoring and - Configure available packet capturing methods
troubleshooting
- Troubleshoot FortiLink issues
- Use available tools to view and extract network information
from FortiSwitch
What type of questions are on the Fortinet NSE6_FSW-7.2 exams?
●
●
●
●
●
Single answer multiple choice
Multiple answer multiple choice
Drag and Drop (DND)
Router Simulation
Testlet
NSE 6 FortiSwitch NSE6_FSW-7.2 Practice Exam Questions.
Grab an understanding from these Fortinet NSE6_FSW-7.2 sample questions and
answers and improve your NSE6_FSW-7.2 exam preparation towards attaining a
Fortinet NSE 6 - FortiSwitch 7.2 Certification. Answering these sample questions will
make you familiar with the types of questions you can expect on the actual exam. Doing
practice with NSE 6 FortiSwitch NSE 6 FortiSwitch questions and answers before the
exam as much as possible is the key to passing the Fortinet NSE6_FSW-7.2
certification exam.
NSE6_FSW-7.2 Fortinet NSE 6 - FortiSwitch 7.2 Sample Questions:01. View the exhibit.
NSE6_FSW-7.2 NSE 6 FortiSwitch Sample Questions
3
WWW.NWEXAM.COM
PDF
Port1 is assigned the default QoS queue profile. The QoS statistics on port1 are
showing dropped packets on the managed FortiSwitch. However, the queue
number showing the drops in the output is 0. Which statement explains the
reason why queue 0 is the only queue which displays the number of dropped
packets?
a) Queue 0 has the highest priority and packets are dropped from it if needed.
b) Queue policy is defined and set to use queue 0 for packets dropped by FortiSwitch.
c) The rate limit set by QoS drops non-critical traffic in the network in queue 0.
d) All traffic except control traffic is assigned to queue 0 as part of the QoS process.
02. Some FortiSwitch models are equipped with two management interfaces.
Which two statements about these two FortiSwitch management interfaces are
true?
(Choose two.)
a) One interface is an out-of-band interface and the other is an in-band interface.
b) The dedicated management interface is only one physical port.
c) Both management interfaces can be configured with the same native VLAN.
d) FortiLink tunnel can be used on both management interfaces.
03. How does deploying FortiSwitch in standalone mode differ from managing it
over FortiLink?
a) Standalone mode does not allow layer 3 routing configurations.
b) Standalone mode does not integrate with other Fortinet products.
c) Standalone mode allows management via FortiGate only.
d) Standalone mode requires a physical console connection.
04. View the exhibit.
You need to display the current physical topology of the two-switch stack
managed by FortiGate using a graphical editor. However, the editor cannot accept
the output shown in the exhibit. Which two reasons prevent you from creating the
physical topology design?
(Choose two.)
NSE6_FSW-7.2 NSE 6 FortiSwitch Sample Questions
4
WWW.NWEXAM.COM
PDF
a) Physical topologies can be displayed only on the FortiGate GUI.
b) The topology cannot be created due to incomplete data.
c) Graphical editors support only grapyiz format data.
d) The CLI output must be in dot format.
05. For in-depth troubleshooting of packet flow issues on FortiSwitch, which
approach is typically recommended?
a) Checking the status LEDs on the device
b) Reviewing virtual LAN configurations
c) Using diagnostic commands to view real-time traffic
d) Resetting the switch to factory defaults
06. What happens if a FortiSwitch port is configured with a security profile which
has EAP pass-through enabled, but the authentication server does not support
EAP?
a) All devices will be placed on the authentication fail VLAN.
b) EAP messages will be processed by FortiSwitch, if the authentication server is
incompatible.
c) The authentication server will relay EAP messages to a compatible server.
d) The security profile will perform a test to confirm server compatibility.
07. View the exhibit.
FortiGate can quarantine devices connected on all of the managed FortiSwitch
ports except port2. Which setting needs to be changed so FortiGate can
quarantine devices on port2?
a) Add the quarantine VLAN to the allowed VLAN settings on the port.
b) Add the quarantine VLAN as tagged native VLAN.
NSE6_FSW-7.2 NSE 6 FortiSwitch Sample Questions
5
WWW.NWEXAM.COM
PDF
c) Enable the quarantine function on the port.
d) Remove the quarantine VLAN from untagged VLANs and assign it to allowed VLANs.
08. Which statements about using the FortiLink split interface when selecting
FortiLink interface members are true?
a) FortiLink must be configured on a software-switch interface.
b) The FortiLink trunk on a managed FortiSwitch must be configured with an MCLAG
active-passive setup.
c) FortiGate can keep only one FortiLink interface member active at a time.
d) The FortiLink interface is directly connected to more than one FortiSwitch.
09. You are asked to convert from using FortiGate to manage FortiSwitch to using
FortiLAN Cloud instead. However, you are unable to log in to FortiLAN Cloud.
Which two reasons explain the failure to register and manage FortiSwitch using
FortiLAN Cloud?
(Choose two.)
a) The FortiSwitch management setting is set to FortiLink.
b) FortiSwitch allows one concurrent administrative access.
c) The support contract associated with FortiSwitch has expired.
d) FortiSwitch uses HTTPS for management traffic.
10. At which layer in the hierarchy network model is the high speed factor crucial,
when selecting an appropriate FortiSwitch device?
a) Core layer
b) Distribution layer
c) Access layer
d) Edge layer
Solutions:
Question: 01 - Answer: d
Question: 02 - Answer: a, b
Question: 03 - Answer: b
Question: 04 - Answer: c, d
Question: 05 - Answer: c
Question: 06 - Answer: a
Question: 07 - Answer: a
Question: 08 - Answer: d
Question: 09 - Answer: a, c
Question: 10 - Answer: a
NSE6_FSW-7.2 NSE 6 FortiSwitch Sample Questions
6
WWW.NWEXAM.COM
PDF
Not every IT certification is intended for professionals, but Fortinet certification is a great
deal. After achieving this Fortinet NSE6_FSW-7.2, you can grab an opportunity to be an
IT professional with unique capability and can help the industry or get a good job. Many
individuals do the Fortinet certifications just for the interest, and that payback as a
profession because of the worth of this course.
NSE6_FSW-7.2 NSE 6 FortiSwitch Sample Questions
7