Piping Flexibility Analysis Client: Description: XXX Issued For Information Project: Analysis By: Checked By: Approval: Date: Rev.: xx xx xx xx 0 Calculation No.: XXX 1 2 xx Project No.: Line No.: XXX Design Conditions Norminal Diameter Outside Diameter Wall Thickness MATERIAL Design Temperature Maximum Ambient Temperature Linear Thermal Expansion Allowable Stress Range Allowable Force at Anchor Cold Modulus of Elasticity Hot Modulus of Elasticity Distance Anchor to Anchor Distance Loop offset Distance Guide to Guide Loop Length Friction Coefficient Pipe Density Fluids Density Insulation Density Insulation Thickness Calculation Result Cold Axial Force Hot Axial Force Friction Axial Force Net Axial Force Maximum Thermal Stress 3 4 xx OD T NPS mm mm T_Des Degree Celsius T_Amb Degree Celsius mm/mm Sa N/mm^2 Fa N Ec N/mm^2 Eh N/mm^2 S m H m G m W m mu Kg/m^3 Kg/m^3 Kg/m^3 mm Fx Fx_hot Ffx Fx_Net SE N N N N N/mm^2 4 114.30 6.02 A312 TP304L ‐104 35 0 279 5000 1.940E+05 2.026E+05 16.00 10.61 27.00 20.86 0.11 0.10 0.30 8027 500 128 125 0.36 21 22 767.2154763 868 6 2 % of allowable % of allowable Calculation I Z T R r h K 3.011E+06 5.268E+04 6.02 152.40 54.14 0.31 5.27 BETA S EXPANSION L Y Y^2*L AA BB CC Ix 1.95 ‐34.62 52.04 6.80 2,409.05 2,892.02 182.18 280.97 946.13 mm m m m^3 m^3 m^3 m^3 m^3 Pipe Area Fluids Area Ins Area Weight Pipe Weight Fluids Weight Ins Total Weight Vertical Load STRESS_max_A STRESS_max_B 0.0020 0.0082 0.0940 16.4384 4.1047 12.0434 32.5865 2557.3849 3.01 5.39 m^2 m^2 m^2 Kg/m Kg/m Kg/m Kg/m N IF G >= 2W IF G < 2W mm^4 mm^3 mm mm mm