Pneumatic valve Manufacturers in Nigeria
African valve is the top Pneumatic Actuator Manufacturers in Nigeria. Pneumatic Actuated
Valves are mechanical devices that utilize compressed air or gas to drive the valve mechanism.
They play a crucial role in industries such as oil and gas, chemical processing, water treatment,
power generation, and manufacturing, providing efficient and reliable control over fluid flow.
Seeking for reliable and top quality Pneumatic Actuator Manufacturers in Nigeria, turn to a
trusted supplier African Valve
How do pneumatic actuators work?
A Pneumatic Actuator is a device that uses mechanical energy which convert compressed air or
gas into mechanical motion
Pneumatic Actuated Valve receives a signal compressed air or gas is directed into the actuator
chamber, creating pressure inside.
● The compressed air enters the actuator and applies pressure to the internal
components, this pressure creates a force that acts upon the actuator's internal
mechanism, starts operating.
● By controlling the direction of airflow, these valves determine the movement of the
piston, allowing for precise control over the actuator's motion.
●
Pneumatic Actuated Valves typically respond to a control signal, which can be
pneumatic, electric, or electronic in nature. This signal decides when and how the
actuator should operate.
Types of Pneumatic Actuated Valve :
● Pneumatic Actuated Ball Valve: Ball valves use a spherical ball to control flow.
Pneumatic Actuated is utilizes compressed air or gas to operate an actuator, which in
turn controls the opening, closing, or modulation of flow through a ball valve
● Pneumatic Actuated Butterfly Valve: Butterfly valves have a disc-shaped closure
element mounted on a rotating shaft that controls the flow by adjusting its angle relative
to the flow direction.
● Pneumatic Actuated Gate Valve: These valves operate by raising or lowering the gate to
either allow or block the flow of fluid, allowing for precise control over fluid flow in
pipelines.
● Pneumatic Actuated Knife Gate Valve: knife gate valve features a sharp-edged gate that
slices through the fluid, ensuring a tight seal when closed and minimal resistance when
open.actuators offer fast response times and precise control over valve operation.
Industries:
● Oil and Gas Industry
● Chemical Industry
● Petrochemical Industry
● Mining Industry
● Marine Industry
Description:
● Available materials options we supply: WCB, WC6, WCC, LCB, LCC, Cast iron, Ductile
Iron, SS316, SS304
● Size: 2" to 80"
● Class: 150 to 300
● Nominal Pressure: PN6 to PN40
● Operation: Pneumatic Actuated
● Ends: Wafer, Lug, Flanged
Configuration of a Pneumatic Actuator:
● 4-20 Mamp
● Pneumatic single acting actuators
● Pneumatic double acting actuators
● Pneumatic rotary actuators
● Pneumatic Scotch and Yoke actuators
● Pressure: 228 bar
Temperature:
● Standard -4°F to 200°F (-20°C to 93°C)
●
●
Low -40°F to 176°F (-40°C to 80°C)
High 0°F to 300°F (-18°C to 149°C)
Visit our website for more detail: https://www.africanvalve.com/product-category/pneumaticactuated-valves/
Our address:
42, Local Airport road Ikeja, 300001, Lagos, Nigeria
Reach us: +1 3476579538
sales@africanvalve.com