IECEE OD-5003-F1:2021 © IEC 2021
Template (Provisional) Equipment List
–1–
Ed.1.2
2021-02-03
TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING
IEC 62271-200:2021, Edition 3.0
High-voltage switchgear and controlgearPart 200:AC metal-enclosed switchgear and controlgear for rated voltages
above 1 kV and up to and including 52 kV
PROVISIONAL
“R”
“S”
“SP”
“W”
“3PPS”
Clause
Required
May be subcontracted, see OD 2012
Specialized Facility, see IECEE 02-2
Witness testing in the categories “MED” and “MEAS”
Three Phase Power Supply required
Measurement/testing
7.2.7.2
Power-frequency voltage tests
7.2.7.3
Lightning impulse voltage tests
7.2.10
Partial discharge tests
7.2.11
7.2.12
Dielectric tests on auxiliary and control circuits
Voltage test as condition check
7.2.101
Dielectric tests on cable testing circuits
7.4
Resistance measurement
Disclaimer: This document is controlled and has been released electronically.
Only the version on the IECEE Website is the current document version
Testing / measuring equipment / material needed
Power-frequency voltage source
Voltage measurement system
Impulse voltage source
Voltage measurement system
Power-frequency voltage source
Voltage measurement system
Coupling capacitor
Partial discharge test system
Withstanding voltage tester
Power-frequency voltage source
Voltage measurement system
Power-frequency voltage source and voltage measurement
system
Direct current voltage source and voltage measurement
system
Circuit resistance measurement instrument
Equipment
Classification
R
R
R
R
R
R
R
2023-10-18
Ed.1.2
2021-02-03
Clause
7.5
Measurement/testing
–2–
IECEE OD-5003-F1:2021 © IEC 2021
Testing / measuring equipment / material needed
7.10.5
Current/voltage source
Current measuring system
The temperature data acquisition system
Short-time withstand current and peak withstand Short circuit current generating system
current tests
Measurement control system
Verification of the IP coding
Test-finger, test-rod, test-wire
Dust chamber
Raining test facility
Verification of the IK coding
Spring hammer
Pendulum hammer
Tightness tests
Leak detector
Pressure meter
Emission tests from the auxiliary and control circuits Anechoic chamber
EMI Receiver
Artificial Mains Network(AMN)
Antenna
Immunity tests on auxiliary and control circuits
The generator of electrical fast transient/burse test
The generator of damped oscillatory wave test
Shielding Room
Additional EMC tests on auxiliary and control circuits The generator of voltage dips , short interruptions and voltage
variations
The generator of the ripple voltage
Shielding Room
Functional tests
Low voltage power supply
Voltage measurement
Verification of the operational characteristics of Low voltage power supply
auxiliary contacts
Voltage measurement
Current source
The temperature data acquisition system
Short-time current source
Inductive load
Environmental tests
Temperature and humidity test chamber
Vibration test equipment
Dielectric test
Power-frequency voltage source
7.11
X-radiation test procedure for vacuum interrupters
7.6
7.7.1
7.7.2
7.8
7.9.1.2
7.9.2
7.9.3
7.10.2
7.10.3
7.10.4
Continuous current tests
Radiation meter
Equipment
Classification
R
R or S*
R
R
R
S
S
S
R
R
R
R
R
IECEE OD-5003-F1:2021 © IEC 2021
Template (Provisional) Equipment List
Clause
Measurement/testing
–3–
Ed.1.2
2021-02-03
Testing / measuring equipment / material needed
7.101
Verification of making and breaking capacities
7.102
Mechanical operation tests
Short circuit current generating system
Voltage generating system
Measurement control system
Load system
Mechanical characteristic testing instrument
7.103
Pressure withstand test for gas-filled compartments
Pressure gauge
7.104
Tests to verify the protection of persons against Power-frequency voltage source
dangerous electrical effects
Voltage measurement system
7.105
Internal arc test
Equipment
Classification
Short circuit current generating system
Voltage generating system
Measurement control system
Indicator
R or S*
R
R
R
R or S*
Note: In clauses 7.6, 7.101, 7.105, S* denotes that the measurement/testing which needs short circuit current capacity above 25kA may be
subcontracted.
Disclaimer: This document is controlled and has been released electronically.
Only the version on the IECEE Website is the current document version
2023-10-18