- No category
Seamless Steel Tubes Technical Specification SA/EN 10216-2
advertisement
01-632 SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES Part 2: Technical delivery conditions for non-alloy and alloy steel tubes with specified elevated temperature properties SA/EN 10216-2 (Identical with EN 10216-2:2002 +A2:2007 with the additional requirements listed on this cover sheet.) 1. Additional Requirements 1.1 Marking In addition to the marking requirements of this specification, all products required to be marked and material identification used on all documentation required by this specification are to be identified by this SA/EN specification designation. 2. National Parts 2.1 The National Foreword and the National Annexes, if any, do not apply for SA/EN 10216-2. 3. Source 3.1 See Nonmandatory Appendix A for ordering information to obtain an English language copy of EN 10216-2 +A2 and its references BC01-632 US Customary Title: ASME Electronic Stress Tables, 2007 US Customary Table: Table 1A - Maximum Allowable Stress Values S for Ferrous Materials Page No. Line No. Class Applic. Applic. Applic. Alloy / Min. Min. and Max. and Max. and Max. Desig./ Cond Size/ Thickness Group Tensile Yield P-No. Temp. Temp. Temp. UNS ./ (in) No. Strength Strength Limit- I Limit- III Limit- VIIINo. Temp (ksi) (ksi) (°F) (°F) 1 (°F) er Nominal Composition Product Form 10 5 Insert------> Insert------> Insert------> Carbon steel Carbon steel Carbon steel Carbon steel Smls. & wld. tubeSA-334 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 1 P235GH P235GH P235GH K03008 14 23 Insert------> Insert------> Insert------> Carbon steel Carbon steel Carbon steel Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH K02707 Insert------> Insert------> Insert------> 26 22 C-0.3Mo C-0.3Mo C-0.3Mo C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A 30 34 Insert------> Insert------> 1Cr-1/2Mo 1Cr-1/2Mo 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 12 13CrMo4-5 13CrMo4-5 K11757 34 36 Insert------> Insert------> 2.25Cr-1Mo 2.25Cr-1Mo 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 F22 10CrMo9-10 10CrMo9-10 K21590 Page 1 - Table 1A - US Spec. No. Type/ Grade 1 5/8<t≤2 1/2 5/8<t≤1 5/8 t≤ 5/8 1 1 1 1 1 1 1 1 55 52 52 52 30 31 32.5 34 NP 1000 1000 1000 700 NP NP NP 650 1000 1000 1000 1 5/8<t≤2 1/2 5/8<t≤1 5/8 t≤ 5/8 1 1 1 1 1 1 1 1 60 59.5 59.5 59.5 37 35.5 37 38.5 1000 1000 1000 1000 700 NP NP NP 1000 1000 1000 1000 3 3 3 3 1 1 1 1 65.5 65.5 65.5 65 37.5 39 40.5 37 1000 1000 1000 1000 NP NP NP 700 1000 1000 1000 1000 1 5/8<t≤2 1/2 t≤1 5/8 4 4 4 1 1 1 65 64 64 40 40.5 42 1200 1200 1200 700 NP NP 1200 1200 1200 1 5/8<t≤2 1/2 t≤1 5/8 5A 5A 5A 1 1 1 75 69.5 69.5 45 39 40.5 1200 1200 1200 700 NP NP 1200 1200 1200 1 5/8<t≤2 1/2 5/8<t≤1 5/8 t≤ 5/8 K11820 2 3 04/11/2010 BC01-632 US Customary Title: ASME Electronic Stress Tables, 2007 US Customary Table: Table 1A - Maximum Allowable Stress Values S for Ferrous Materials Applic. and Max. External Temp. Pressure Limit- XII Chart No. (°F) Nominal Composition Product Form Carbon steel Carbon steel Carbon steel Carbon steel Smls. & wld. tubeSA-334 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 1 P235GH P235GH P235GH 650 NP NP NP CS-2 CS-2 CS-2 CS-2 Carbon steel Carbon steel Carbon steel Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH 650 NP NP NP C-0.3Mo C-0.3Mo C-0.3Mo C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A 1Cr-1/2Mo 1Cr-1/2Mo 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 2.25Cr-1Mo 2.25Cr-1Mo 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 Page 2 - Table 1A - US Spec. No. -20-100°F <=200°F (ksi) (ksi) <=300°F (ksi) <=400°F (ksi) <=500°F (ksi) <=600°F (ksi) W12, W14 G10, S1, T2, W14 G10, S1, T2, W14 G10, S1, T2, W14 15.7 15.7 15.7 15.7 15.3 CS-2 CS-2 CS-2 CS-2 G10, S1, T1 G10, S1, T2 G10, S1, T2 G10, S1, T2 17.1 NP NP NP 650 CS-2 CS-2 CS-2 CS-2 G11, S2, T4 G11, S2, T4 G11, S2, T4 G11, S3, T4 12 13CrMo4-5 13CrMo4-5 NP NP NP CS-2 CS-2 CS-2 S4, T5 T5 T5 18.6 F22 10CrMo9-10 10CrMo9-10 NP NP NP CS-2 CS-2 CS-2 S4, T4, W7, W9 T4, W7, W9 T4, W7, W9 21.4 Type/ Grade Notes 15.7 14.9 14.9 14.9 14.9 14.9 14.9 17.1 14.9 14.9 14.9 17.1 14.9 14.9 14.9 17.1 14.9 14.9 14.9 17.1 14.9 14.9 14.9 17.1 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 17.0 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.2 18.2 18.2 17.9 18.2 18.2 21.4 19.9 19.9 18.6 17.9 18.2 18.2 20.9 19.9 19.9 18.6 17.9 18.2 18.2 20.6 19.4 19.4 18.6 17.9 18.2 18.2 20.5 19.2 19.2 18.2 18.2 20.4 19.1 19.1 18.9 18.9 04/11/2010 BC01-632 US Customary Title: ASME Electronic Stress Tables, 2007 US Customary Table: Table 1A - Maximum Allowable Stress Values S for Ferrous Materials Nominal Composition Product Form <=650°F (ksi) <=700°F (ksi) Carbon steel Carbon steel Carbon steel Carbon steel Smls. & wld. tubeSA-334 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 1 P235GH P235GH P235GH 14.8 14.3 Carbon steel Carbon steel Carbon steel Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH 17.1 C-0.3Mo C-0.3Mo C-0.3Mo C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A 1Cr-1/2Mo 1Cr-1/2Mo 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 12 13CrMo4-5 13CrMo4-5 17.9 2.25Cr-1Mo 2.25Cr-1Mo 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 F22 10CrMo9-10 10CrMo9-10 20.2 Page 3 - Table 1A - US Spec. No. Type/ Grade 14.9 14.9 14.9 <=750°F (ksi) <=800°F (ksi) <=850°F (ksi) 13.0 13.0 13.0 10.8 10.8 10.8 8.7 8.7 8.7 14.9 14.9 14.9 15.6 13 10.8 8.7 <=900°F <=950° <=1000 <=1050 <=1100 <=1150 <=1200 (ksi) F (ksi) °F (ksi) °F (ksi) °F (ksi) °F (ksi) °F (ksi) 5.9 5.9 5.9 5.9 4.0 4.0 4.0 4.0 2.5 2.5 2.5 2.5 17.0 17.0 17.0 17.0 17.0 17.0 13.0 13.0 13.0 10.8 10.8 10.8 8.7 8.7 8.7 5.9 5.9 5.9 4.0 4.0 4.0 2.5 2.5 2.5 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.6 18.2 18.2 18.2 13.7 13.7 13.7 8.2 8.2 8.2 4.8 4.8 4.8 18.6 18.6 18.6 17.9 18.2 18.2 17.9 18.2 18.2 20.0 18.8 18.8 18.4 17.9 18.2 18.2 19.7 18.6 18.6 17.9 17.9 18.2 18.2 19.3 18.3 18.3 13.7 17.4 17.7 17.7 18.7 17.9 17.9 8.2 17.0 17.0 11.3 7.2 4.5 2.8 11.3 7.2 4.5 2.8 11.3 7.2 4.5 2.8 15.8 15.8 11.4 7.8 5.1 3.2 2.0 1.2 11.4 7.8 5.1 3.2 2.0 1.2 11.4 7.8 5.1 3.2 2.0 1.2 15.8 17.4 17.4 4.8 1.9 1.9 1.2 1.2 04/11/2010 BC01-632 US Customary Title: ASME Electronic Stress Tables, 2007 US Customary Table: Table U - Tensile Strength Values Su for Ferrous and Nonferrous Materials Page No. Line No. Nominal Composition Alloy Class/C Desig/UNS ond/Tem Size/Thicknes Min Tensile No per s Strength d-20 to 100 d200 55.0 Product Form Spec No Type/Grade 486 33 Carbon steel Insert------> Carbon steel Insert------> Carbon steel Insert------> Carbon steel Smls. & wld. tube Smls. tube Smls. tube Smls. tube SA-334 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 1 P235GH P235GH P235GH K03008 490 2 Carbon steel Insert------> Carbon steel Insert------> Carbon steel Insert------> Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH K02707 Insert------> C-0.3Mo Insert------> C-0.3Mo Insert------> C-0.3Mo 496 9 C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A 498 19 1Cr-1/2Mo Insert------> 1Cr-1/2Mo Insert------> 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 12 13CrMo4-5 13CrMo4-5 K11757 500 25 2.25Cr-1Mo Insert------> 2.25Cr-1Mo Insert------> 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 F22 10CrMo9-10 10CrMo9-10 K21590 Page 4 - Table U - US 55 1 5/8<t≤2 1/2 5/8<t≤1 5/8 t≤ 5/8 55.0 52 52 52 60 52.2 52.2 52.2 60.0 d300 d400 55.0 52.2 52.2 52.2 60.0 55.0 52.2 52.2 52.2 60.0 52.2 52.2 52.2 60.0 1 5/8<t≤2 1/2 5/8<t≤1 5/8 t≤ 5/8 59.5 59.5 59.5 59.5 59.5 59.5 59.5 59.5 59.5 59.5 59.5 59.5 59.5 59.5 59.5 1 5/8<t≤2 1/2 5/8<t≤1 5/8 t≤ 5/8 65.5 65.5 65.5 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 K11820 65 2 65.0 65 1 5/8<t≤2 1/2 t≤1 5/8 3 65.0 64 64 75 1 5/8<t≤2 1/2 t≤1 5/8 65.0 65.0 63.8 63.8 75.0 69.5 69.5 65.0 65.0 63.8 63.8 75.0 69.6 69.6 65.0 65.0 63.8 63.8 73.0 69.6 69.6 63.8 63.8 72.2 67.8 67.8 67.1 67.1 04/11/2010 BC01-632 US Customary Title: ASME Electronic Stress Tables, 2007 US Customary Table: Table U - Tensile Strength Values Su for Ferrous and Nonferrous Materials Nominal Composition Product Form Spec No Type/Grade d500 Carbon steel Carbon steel Carbon steel Carbon steel Smls. & wld. tube Smls. tube Smls. tube Smls. tube SA-334 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 1 P235GH P235GH P235GH 55.0 Carbon steel Carbon steel Carbon steel Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH 60.0 C-0.3Mo C-0.3Mo C-0.3Mo C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A 1Cr-1/2Mo 1Cr-1/2Mo 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 12 13CrMo4-5 13CrMo4-5 65.0 2.25Cr-1Mo 2.25Cr-1Mo 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 F22 10CrMo9-10 10CrMo9-10 71.9 Page 5 - Table U - US d600 d650 55.0 52.2 52.2 52.2 d700 55.0 52.2 52.2 52.2 60.0 d750 55.0 52.2 52.2 52.2 60.0 d800 54.3 52.2 52.2 52.2 60.0 d850 50.5 51.6 51.6 51.6 59.3 d900 46.0 48.0 48.0 48.0 55.1 d950 41.1 43.7 43.7 43.7 50.2 d1000 36.1 39.0 39.0 39.0 44.8 31.7 34.3 34.3 34.3 39.4 30.1 30.1 30.1 34.6 59.5 59.5 59.5 59.5 59.5 59.5 59.5 59.5 59.5 59.5 59.5 59.5 58.7 58.7 58.7 54.6 54.6 54.6 49.8 49.8 49.8 44.4 44.4 44.4 39.0 39.0 39.0 34.3 34.3 34.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 65.3 63.7 63.7 63.7 60.7 60.7 60.7 57.0 57.0 57.0 52.7 52.7 52.7 65.0 65.0 65.0 65.0 63.8 63.8 65.0 63.8 63.8 71.4 66.7 66.7 65.0 65.0 63.8 63.8 70.8 66.2 66.2 65.0 65.0 63.8 63.8 70.1 65.7 65.7 65.0 65.0 63.8 63.8 69.0 65.0 65.0 63.5 63.5 63.8 63.8 67.5 64.0 64.0 60.4 60.4 62.0 62.0 65.6 62.7 62.7 56.8 56.8 59.3 59.3 63.0 60.9 60.9 52.5 52.5 55.9 55.9 59.7 58.5 58.5 51.9 51.9 55.4 55.4 55.4 51.5 51.5 04/11/2010 BC01-632 US Customary Title: ASME Electronic Stress Tables, 2007 US Customary Table Y-1 - Yield Strength Values Sy for Ferrous and Nonferrous Materials page _no line_no Nominal Composition Product Form Spec No Type/Grade Class/ Alloy Cond/ Desig/UNS Tempe Size/Thicknes No r s 566 33 Insert------> Insert------> Insert------> Carbon steel Carbon steel Carbon steel Carbon steel Smls. & wld. tube Smls. tube Smls. tube Smls. tube SA-334 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 1 P235GH P235GH P235GH K03008 574 2 Insert------> Insert------> Insert------> Carbon steel Carbon steel Carbon steel Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH K02707 Insert------> Insert------> Insert------> 586 37 C-0.3Mo C-0.3Mo C-0.3Mo C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A 594 6 Insert------> Insert------> 1Cr-1/2Mo 1Cr-1/2Mo 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 12 13CrMo4-5 13CrMo4-5 K11757 598 11 Insert------> Insert------> 2.25Cr-1Mo 2.25Cr-1Mo 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 F22 10CrMo9-10 10CrMo9-10 K21590 Page 6 - Table Y-1 - US K11820 2 3 Min Tensile Min Yield Strength Strength Notes d-20 to 100 55 1 5/8<t≤2 1/2 52 5/8<t≤1 5/8 52 t≤ 5/8 52 30 31 32.5 34 30.0 60 1 5/8<t≤2 1/2 59.5 5/8<t≤1 5/8 59.5 t≤ 5/8 59.5 37 35.5 37 38.5 37.0 1 5/8<t≤2 1/2 65.5 5/8<t≤1 5/8 65.5 t≤ 5/8 65.5 65 37.5 39 40.5 37 65 1 5/8<t≤2 1/2 64 t≤1 5/8 64 40 40.5 42 40.0 75 1 5/8<t≤2 1/2 69.5 t≤1 5/8 69.5 45 39 40.5 45.0 d150 28.2 31.2 32.6 34.1 29.3 30.7 32.0 34.8 35.5 37.0 38.4 33.4 34.8 36.1 37.7 39.2 40.6 36.3 37.7 39.1 37.0 35.6 37.5 40.6 42.1 38.6 40.0 42.5 39.2 40.6 37.0 38.4 04/11/2010 BC01-632 US Customary Title: ASME Electronic Stress Tables, 2007 US Customary Table Y-1 - Yield Strength Values Sy for Ferrous and Nonferrous Materials Nominal Composition Product Form Spec No Type/Grade d200 Carbon steel Carbon steel Carbon steel Carbon steel Smls. & wld. tube Smls. tube Smls. tube Smls. tube SA-334 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 1 P235GH P235GH P235GH 27.5 Carbon steel Carbon steel Carbon steel Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH 33.9 C-0.3Mo C-0.3Mo C-0.3Mo C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A 1Cr-1/2Mo 1Cr-1/2Mo 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 12 13CrMo4-5 13CrMo4-5 36.2 2.25Cr-1Mo 2.25Cr-1Mo 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 F22 10CrMo9-10 10CrMo9-10 41.2 Page 7 - Table Y-1 - US d250 27.0 28.6 29.9 31.2 d300 d350 26.5 28.0 29.3 30.6 33.3 d400 d450 25.6 27.6 28.9 30.2 27.1 28.4 29.7 32.7 d500 d550 24.4 26.6 27.9 29.1 26.1 27.3 28.5 31.6 d600 23.0 25.4 26.6 27.8 24.7 25.8 27.0 30.2 23.9 25.0 26.1 28.4 32.6 33.9 35.2 31.9 33.3 34.6 31.4 32.7 34.0 30.9 32.2 33.5 30.4 31.6 32.8 29.7 30.9 32.1 29.0 30.1 31.3 28.1 29.3 30.4 27.2 28.4 29.5 35.4 36.8 38.2 34.7 36.0 37.4 34.0 35.3 36.6 33.4 34.7 36.0 32.8 34.1 35.4 32.3 33.6 34.8 31.8 33.1 34.3 31.3 32.5 33.8 30.8 32.0 33.2 34.8 34.0 33.4 35.0 37.5 38.8 34.0 36.5 37.8 40.2 35.9 37.2 32.2 32.5 35.6 36.9 34.9 36.1 34.3 35.5 33.7 34.9 39.4 35.0 36.3 31.2 30.2 31.4 34.2 35.4 33.6 34.8 33.2 34.4 32.8 34.0 38.1 30.5 33.0 34.2 32.4 33.6 32.4 33.6 32.1 33.3 37.3 31.8 33.0 36.5 31.7 32.9 04/11/2010 BC01-632 US Customary Title: ASME Electronic Stress Tables, 2007 US Customary Table Y-1 - Yield Strength Values Sy for Ferrous and Nonferrous Materials Nominal Composition Product Form Spec No Type/Grade d650 Carbon steel Carbon steel Carbon steel Carbon steel Smls. & wld. tube Smls. tube Smls. tube Smls. tube SA-334 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 1 P235GH P235GH P235GH 22.2 Carbon steel Carbon steel Carbon steel Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH 27.4 C-0.3Mo C-0.3Mo C-0.3Mo C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A 1Cr-1/2Mo 1Cr-1/2Mo 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 12 13CrMo4-5 13CrMo4-5 30.1 2.25Cr-1Mo 2.25Cr-1Mo 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 F22 10CrMo9-10 10CrMo9-10 36.1 Page 8 - Table Y-1 - US d700 21.5 23.1 24.2 25.3 d750 20.8 22.3 23.4 24.4 26.5 d800 20.1 21.6 22.6 23.6 25.6 d850 19.5 20.9 21.9 22.8 24.8 d900 19.0 20.3 21.2 22.2 24.1 d950 18.4 19.7 20.6 21.5 23.4 d1000 17.8 19.2 20.0 20.9 22.7 18.5 19.4 20.3 22.0 26.3 27.4 28.5 25.4 26.5 27.5 24.6 25.6 26.6 23.8 24.8 25.8 23.1 24.1 25.0 22.5 23.4 24.3 21.8 22.7 23.6 21.1 22.0 22.8 30.3 31.4 32.6 29.7 30.8 31.9 29.0 30.1 31.2 28.2 29.3 30.4 27.3 28.3 29.4 26.3 27.3 28.3 25.1 26.1 27.1 23.9 24.8 25.7 29.7 29.1 28.4 29.6 31.3 32.4 29.1 30.7 31.8 35.6 31.4 32.5 27.7 28.6 30.0 31.1 35.0 30.9 32.1 26.8 28.0 29.3 30.3 34.3 30.4 31.6 25.8 27.2 28.5 29.5 33.5 29.8 30.9 24.7 26.3 27.6 28.6 32.4 29.1 30.2 23.4 25.3 26.6 27.5 31.2 28.2 29.3 25.4 26.3 29.7 27.1 28.2 25.8 26.8 04/11/2010 BC01-632 SI Metric Title: ASME Electronic Stress Tables, 2006 Metric Table: Table 1A - Maximum Allowable Stress Values S for Ferrous Materials Page Line No. No. Nominal Composition Product Form Spec. No. Type/ Grade Alloy Desig./ UNS No. 10 5 Carbon steel Insert------> Carbon steel Insert------> Carbon steel Insert------> Carbon steel Smls. & wld. tube SA-334 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 1 P235GH P235GH P235GH K03008 14 23 Carbon steel Insert------> Carbon steel Insert------> Carbon steel Insert------> Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH K02707 Insert------> C-0.3Mo Insert------> C-0.3Mo Insert------> C-0.3Mo 26 22 C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A 30 34 1Cr-1/2Mo Insert------> 1Cr-1/2Mo Insert------> 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 12 13CrMo4-5 13CrMo4-5 K11757 34 36 2.25Cr-1Mo Insert------> 2.25Cr-1Mo Insert------> 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 F22 10CrMo9-10 10CrMo9-10 K21590 Page 9 - Table 1A - SI Class/ Cond./ Size/ Tempe Thickness Group r (mm) P-No. No. Min. Tensile Strength (MPa) Min. Yield Strength (MPa) Applic. and Max. Temp. Limit- I (°C) Applic. and Max. Temp. Limit- III (°C) Applic. and Max. Temp. Limit- VIII1 (°C) 40<t≤60 16<t≤40 t≤16 1 1 1 1 1 1 1 1 380 360 360 360 205 215 225 235 NP 538 538 538 371 NP NP NP 343 538 538 538 40<t≤60 16<t≤40 t≤16 1 1 1 1 1 1 1 1 415 410 410 410 255 245 255 265 538 538 538 538 371 NP NP NP 538 538 538 538 3 3 3 3 1 1 1 1 450 450 450 450 260 270 280 255 538 538 538 538 NP NP NP 371 538 538 538 538 40<t≤60 t≤40 4 4 4 1 1 1 450 440 440 275 280 290 649 649 649 371 NP NP 649 649 649 40<t≤60 t≤40 5A 5A 5A 1 1 1 515 480 480 310 270 280 649 649 649 371 NP NP 649 649 649 40<t≤60 16<t≤40 t≤16 K11820 2 3 04/11/2010 BC01-632 SI Metric Title: ASME Electronic Stress Tables, 2006 Metric Table: Table 1A - Maximum Allowable Stress Values S for Ferrous Materials Applic. and Max. Temp. Limit- XII (°C) External Pressure Chart No. Notes -30<=65° <=100 <=125 <=150 <=200 <=250 <=300 <=325 <=350 40°C C °C °C °C °C °C °C °C °C (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) Nominal Composition Product Form Carbon steel Carbon steel Carbon steel Carbon steel Smls. & wld. tube SA-334 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 1 P235GH P235GH P235GH 343 NP NP NP CS-2 CS-2 CS-2 CS-2 W12, W14 108 108 108 108 108 108 108 107 104 101 G10, S1, T2, W14 103 103 103 103 103 103 103 103 103 103 G10, S1, T2, W14 103 103 103 103 103 103 103 103 103 103 G10, S1, T2, W14 103 103 103 103 103 103 103 103 103 103 Carbon steel Carbon steel Carbon steel Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH 343 NP NP NP CS-2 CS-2 CS-2 CS-2 G10, S1, T1 G10, S1, T2 G10, S1, T2 G10, S1, T2 118 118 118 118 118 118 118 118 118 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 C-0.3Mo C-0.3Mo C-0.3Mo C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A NP NP NP 343 CS-2 CS-2 CS-2 CS-2 G11, S2, T4 G11, S2, T4 G11, S2, T4 G11, S3, T4 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 128 128 128 128 128 128 128 128 128 128 1Cr-1/2Mo 1Cr-1/2Mo 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 12 13CrMo4-5 13CrMo4-5 NP NP NP CS-2 CS-2 CS-2 S4, T5 T5 T5 128 128 125 124 123 123 123 123 123 123 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 126 2.25Cr-1Mo 2.25Cr-1Mo 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 F22 10CrMo9-10 10CrMo9-10 NP NP NP CS-2 CS-2 CS-2 S4, T4, W7, W9 T4, W7, W9 T4, W7, W9 148 148 147 146 144 142 141 141 140 139 137 137 137 137 135 133 132 132 132 131 137 137 137 137 135 133 132 132 132 131 Page 10 - Table 1A - SI Spec. No. Type/ Grade 04/11/2010 BC01-632 SI Metric Title: ASME Electronic Stress Tables, 2006 Metric Table: Table 1A - Maximum Allowable Stress Values S for Ferrous Materials Type/ Grade <=375 <=400 <=425 <=450 <=475 <=500 <=525 <=550 <=575 <=600 <=625 <=650 °C °C °C °C °C °C °C °C °C °C °C °C (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) Smls. & wld. tube SA-334 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 1 P235GH P235GH P235GH 97.8 89.1 75.4 62.6 45.5 31.6 102 89.1 75.4 62.6 45.5 31.6 102 89.1 75.4 62.6 45.5 31.6 102 89.1 75.4 62.6 45.5 31.6 Carbon steel Carbon steel Carbon steel Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH 105 88.9 75.3 62.7 45.5 31.6 21.9 12.7 105 88.9 75.3 62.7 45.5 31.6 21.9 12.7 105 88.9 75.3 62.7 45.5 31.6 21.9 12.7 105 88.9 75.3 62.7 45.5 31.6 21.9 12.7 C-0.3Mo C-0.3Mo C-0.3Mo C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A 129 129 129 126 105 68.9 42.8 23.2 129 129 129 126 105 68.9 42.8 23.2 129 129 129 126 105 68.9 42.8 23.2 128 128 127 124 105 68.9 42.8 23.2 1Cr-1/2Mo 1Cr-1/2Mo 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 12 13CrMo4-5 13CrMo4-5 123 123 123 123 123 94.4 60.2 40.8 26.3 17.3 11.7 7.40 126 126 126 123 118 94.4 60.2 40.8 26.3 17.3 11.7 7.40 126 126 126 123 118 94.4 60.2 40.8 26.3 17.3 11.7 7.40 2.25Cr-1Mo 2.25Cr-1Mo 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 F22 10CrMo9-10 10CrMo9-10 138 136 133 130 116 89.4 64.3 44.9 30.1 19.7 12.9 8.06 129 126 123 119 113 89.4 64.3 44.9 30.1 19.7 12.9 8.06 129 126 123 119 113 89.4 64.3 44.9 30.1 19.7 12.9 8.06 Nominal Composition Product Form Carbon steel Carbon steel Carbon steel Carbon steel Page 11 - Table 1A - SI Spec. No. 21.9 21.9 21.9 12.7 12.7 12.7 04/11/2010 BC01-632 SI Metric Title: ASME Electronic Stress Tables, 2007 Metric Table: Table U - Tensile Strength Values Su for Ferrous and Nonferrous Materials Page No. Line Nominal_Comp No. osition Product_Form Spec_No Type_Grade Class _Con Min_Te Alloy_Desig_ d_Te Size_Thic nsile_St UNS_No mper kness rength 30 to 40 m100 m150 m200 m250 m300 m325 379 379 379 379 379 486 33 Insert------> Insert------> Insert------> Carbon steel Carbon steel Carbon steel Carbon steel Smls. & wld. tube SA-334 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 1 P235GH P235GH P235GH K03008 490 2 Insert------> Insert------> Insert------> Carbon steel Carbon steel Carbon steel Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH K02707 Insert------> Insert------> Insert------> 496 9 C-0.3Mo C-0.3Mo C-0.3Mo C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A 498 19 1Cr-0.5Mo Insert------> 1Cr-1/2Mo Insert------> 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 12 13CrMo4-5 13CrMo4-5 K11757 500 25 2.25Cr-1Mo Insert------> 2.25Cr-1Mo Insert------> 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 F22 10CrMo9-10 10CrMo9-10 K21590 Page 12 - Table U - SI 380 40<t≤60 16<t≤40 t≤16 379 360 360 360 415 379 360 360 360 414 360 360 360 414 360 360 360 414 360 360 360 414 360 360 360 414 360 360 360 414 360 360 360 414 40<t≤60 16<t≤40 t≤16 410 410 410 410 410 410 410 410 410 410 410 410 410 410 410 410 410 410 410 410 410 410 410 410 40<t≤60 16<t≤40 t≤16 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 K11820 450 2 448 450 40<t≤60 t≤40 3 448 440 440 515 40<t≤60 t≤40 448 439 440 440 517 480 480 448 431 440 440 516 480 480 448 431 440 440 503 480 480 448 431 440 440 498 473 473 448 431 440 440 496 466 466 448 431 440 440 494 464 464 440 440 491 462 462 460 460 04/11/2010 BC01-632 SI Metric Title: ASME Electronic Stress Tables, 2007 Metric Table: Table U - Tensile Strength Values Su for Ferrous and Nonferrous Materials Nominal_Comp osition Product_Form Spec_No Type_Grade m350 m375 m400 m425 m450 m475 m500 m525 379 374 350 322 292 261 232 Carbon steel Carbon steel Carbon steel Carbon steel Smls. & wld. tube SA-334 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 1 P235GH P235GH P235GH 379 Carbon steel Carbon steel Carbon steel Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH 414 C-0.3Mo C-0.3Mo C-0.3Mo C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A 1Cr-0.5Mo 1Cr-1/2Mo 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 12 13CrMo4-5 13CrMo4-5 431 2.25Cr-1Mo 2.25Cr-1Mo 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 F22 10CrMo9-10 10CrMo9-10 487 Page 13 - Table U - SI 360 360 360 360 360 360 414 355 355 355 408 332 332 332 382 306 306 306 352 277 277 277 319 248 248 248 285 220 220 220 253 410 410 410 410 410 410 404 404 404 379 379 379 349 349 349 316 316 316 282 282 282 250 250 250 450 450 450 450 450 450 450 450 450 450 450 450 442 442 442 424 424 424 403 403 403 377 377 377 448 448 448 431 440 440 431 440 440 482 457 457 448 431 440 440 475 451 451 440 431 440 440 466 443 443 422 424 430 430 455 431 431 401 407 414 414 439 416 416 376 385 395 395 421 396 396 371 371 396 373 373 345 345 04/11/2010 BC01-632 SI Metric Title: ASME Electronic Stress Tables, 2007 Metric Table: Table Y-1 - Yield Strength Values Sy for Ferrous and Nonferrous Materials page_n Nominal_Comp o line_no osition Product_Form Spec_No Type_Grade Class_ Cond_ Min_Tens Min_Yiel Alloy_Desig_ Tempe Size_Thi ile_Streng d_Stren UNS_No r ckness th gth Notes 566 33 Insert-----> Insert-----> Insert-----> Carbon steel Carbon steel Carbon steel Carbon steel Smls. & wld. tubeSA-334 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 P235GH P235GH P235GH 574 2 Insert-----> Insert-----> Insert-----> Carbon steel Carbon steel Carbon steel Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH Insert-----> Insert-----> Insert-----> 586 37 C-0.3Mo C-0.3Mo C-0.3Mo C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A 594 6 Insert-----> Insert-----> 1Cr-1/2Mo 1Cr-1/2Mo 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 12 13CrMo4-5 13CrMo4-5 K11757 598 11 Insert-----> Insert-----> 2.25Cr-1Mo 2.25Cr-1Mo 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 F22 10CrMo9-10 10CrMo9-10 K21590 Page 14 - Table Y-1 - SI 1 K03008 380 40<t≤60 16<t≤40 t≤16 K02707 205 360 360 360 415 m30_40 m65 207 215 225 235 255 m100 195 215 225 235 255 189 202 212 221 240 196 205 214 233 40<t≤60 16<t≤40 t≤16 410 410 410 245 255 265 245 255 265 230 240 249 223 232 242 40<t≤60 16<t≤40 t≤16 450 450 450 260 270 280 260 270 280 250 260 270 243 252 262 K11820 450 2 255 450 40<t≤60 t≤40 3 275 440 440 515 40<t≤60 t≤40 255 276 280 290 310 480 480 246 259 280 290 310 270 280 239 248 266 276 293 270 280 257 266 282 256 266 248 258 04/11/2010 BC01-632 SI Metric Title: ASME Electronic Stress Tables, 2007 Metric Table: Table Y-1 - Yield Strength Values Sy for Ferrous and Nonferrous Materials Nominal_Comp osition Product_Form Spec_No Type_Grade m125 Carbon steel Carbon steel Carbon steel Carbon steel Smls. & wld. tubeSA-334 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 P235GH P235GH P235GH Carbon steel Carbon steel Carbon steel Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH C-0.3Mo C-0.3Mo C-0.3Mo C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A 1Cr-1/2Mo 1Cr-1/2Mo 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 12 13CrMo4-5 13CrMo4-5 240 2.25Cr-1Mo 2.25Cr-1Mo 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 F22 10CrMo9-10 10CrMo9-10 276 Page 15 - Table Y-1 - SI m150 1 186 m175 183 193 202 211 229 m200 180 190 199 208 225 m225 177 187 196 205 222 m250 174 184 193 201 219 m275 170 181 189 198 215 m300 166 177 185 193 210 m325 161 173 181 189 205 157 168 176 183 200 163 171 178 193 220 229 238 217 225 234 213 222 231 210 219 227 206 214 223 202 210 218 197 205 213 191 199 207 186 193 201 238 248 257 234 243 252 230 239 248 227 236 244 224 232 241 221 229 238 218 226 234 215 223 231 211 219 228 234 230 226 234 251 260 229 246 254 271 245 254 223 225 241 249 267 242 251 219 221 236 245 263 239 248 216 218 233 241 260 237 246 213 215 229 237 258 235 244 210 212 225 233 256 233 242 207 209 222 230 253 231 240 218 226 251 229 238 227 235 04/11/2010 BC01-632 SI Metric Title: ASME Electronic Stress Tables, 2007 Metric Table: Table Y-1 - Yield Strength Values Sy for Ferrous and Nonferrous Materials Nominal_Comp osition Product_Form Spec_No Type_Grade m350 Carbon steel Carbon steel Carbon steel Carbon steel Smls. & wld. tubeSA-334 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 Smls. tube SA/EN 10216-2 P235GH P235GH P235GH Carbon steel Carbon steel Carbon steel Carbon steel Smls. tube Smls. tube Smls. tube Smls. tube SA-210 SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 A-1 P265GH P265GH P265GH C-0.3Mo C-0.3Mo C-0.3Mo C-0.5Mo Smls. tube Smls. tube Smls. tube Plate SA/EN 10216-2 SA/EN 10216-2 SA/EN 10216-2 SA-204 16Mo3 16Mo3 16Mo3 A 1Cr-1/2Mo 1Cr-1/2Mo 1Cr-1/2Mo Plate Smls. tube Smls. tube SA-387 SA/EN 10216-2 SA/EN 10216-2 12 13CrMo4-5 13CrMo4-5 207 2.25Cr-1Mo 2.25Cr-1Mo 2.25Cr-1Mo Forgings Smls. tube Smls. tube SA-182 SA/EN 10216-2 SA/EN 10216-2 F22 10CrMo9-10 10CrMo9-10 248 Page 16 - Table Y-1 - SI m375 1 152 m400 148 158 165 173 187 m425 143 153 160 167 182 m450 139 149 156 162 176 m475 135 144 151 158 171 m500 132 141 147 154 167 m525 128 137 143 150 163 125 133 140 146 158 130 136 142 154 180 187 195 175 182 189 169 176 183 165 171 178 160 167 173 156 162 169 152 158 164 148 154 160 208 216 224 204 212 220 200 207 215 195 202 210 189 196 204 183 190 197 176 183 190 169 175 182 204 200 196 204 215 222 201 211 218 245 224 233 191 197 207 214 241 222 230 186 194 202 209 237 219 227 180 189 197 204 232 215 223 173 184 192 199 225 211 219 166 178 186 192 218 206 213 179 185 210 199 207 191 198 04/11/2010
0
advertisement
Download
advertisement
Add this document to collection(s)
You can add this document to your study collection(s)
Sign in Available only to authorized usersAdd this document to saved
You can add this document to your saved list
Sign in Available only to authorized users