Luxima Technology LLC
600 N. Rosemead Blvd., Suite 212
Pasadena, CA 91107, United States of America
Tel: +1 626-510-6288 Email: info@luxima.com
LUXIMA™ LUX2100 Evaluation System
1920 × 1080 @ 1,000 FPS Sensor Evaluation System
The LUX2100-EVS enables the user to evaluate the performance of the LUX2100 Sensor. The
LUX2100 Sensor is a Global Shutter CMOS Digital Sensor with 2.1 Megapixel (1920 × 1080) @
1,000 FPS. The LUX2100-EVS consists of the LUX2100-SEP, a Sensor Evaluation Platform, and
the LUX2100-SHB, a Sensor Headboard.
Main features of LUX2100-SHB






Small 52.0mm × 52.0mm Sensor Headboard footprint
1920 × 1080 pixels @ 1,000 FPS 4/3” Global Shutter CMOS Sensor
On-Board drivers for buffering reference voltages to the LUX2100 Sensor
Two connectors for data output, register programming and voltage references
Lens Mount support CS-mount and C-mount lenses with CS to C mount adapter
Optional 4/3” C-mount Lens for the Sensor Head Board can be purchased
LUX2100-EVS v1.1
October 2016
Luxima is a trademark of Luxima Technology LLC.
© 2016 Luxima Technology LLC. All rights reserved.
1/3
Luxima Technology LLC
600 N. Rosemead Blvd., Suite 212
Pasadena, CA 91107, United States of America
Tel: +1 626-510-6288 Email: info@luxima.com
Main features of LUX2100-SEP





On-board FPGA to receive 32-channel LVDS data @ 900Mbps/channel
2GB DDR3 memory to store consecutive image frames from the LUX2100-SHB
On-board USB chipset for USB 2.0 Interface to PC
Sensor Control Software for image capture, playback and sensor communication
USB cable and DC 5V Power Supply Included
LUX2100-SHB
LUX2100
LVDS Data
Channels
Sensor
Communication
FPGA
DDR3
Memory
USB
Chipset
LUX2100-SEP
LUX2100-EVS v1.1
October 2016
Luxima is a trademark of Luxima Technology LLC.
© 2016 Luxima Technology LLC. All rights reserved.
LUX2100 EVS
Software
PC
2/3
Luxima Technology LLC
600 N. Rosemead Blvd., Suite 212
Pasadena, CA 91107, United States of America
Tel: +1 626-510-6288 Email: info@luxima.com
Documentation provided with purchase of Evaluation System




Schematic of Sensor Evaluation Platform, LUX2100-SEP
Schematic of Sensor Headboard, LUX2100-SHB
Example artwork of Sensor Headboard layout
Verilog code for receiving of LVDS data and deserialization
- sensor_rx module shown in block diagram below
SENSOR
DCLKP/N
data_in_p/n[32:0] = {PCLKP/N,CHP/N[31:0]}
FPGA
sensor_rx
Included in EVS
package
serdes_clk_rx
DDR_6TO1_RX
BUFIO2_CLK
div by 6
mult
by 2
DCLK/3
1 receiver per
data channel +
PCLK
IDELAY
all channels use same
fixed idelay
ISERDES2
6:1
first stage of
deserialization
deserializer
2:1
deserializer:
2:1 to recover 12 bits
deserializer:
2:1 to recover 24 bits needed
to find word boundary
PLL
div
by 1
DCLK/6
deserializer
2:1
div
by 4
DCLK/24
word boundary
align state machine
clkout
clk_rx
word boundary align
state machine
data_out[395:0]
{pclk[11:0], data[383:0]}
Image processing
32 pixels (=1 kernel) with
corresponding pclk,
clocked on clk_rx
Not included with
purchase of EVS
DDR3 frame buffer / USB interface
LUX2100-EVS v1.1
October 2016
Luxima is a trademark of Luxima Technology LLC.
© 2016 Luxima Technology LLC. All rights reserved.
3/3