Building technology Notations
Sectors and their roles within the construction and manufacturing
industries.
Industries
 Construction industry: manufacturing, production, design and
administration with materials involve in the erection of buildings.
 Manufacturing: the production, making or preparing of materials and
products for use.
 Electrical and electronic.
Painter:
1. prepares surface for the application of paint and primer
2. sand surface for the application of finished
3. fill out faults on surfaces.
4.Applyb primer on surface
5.Apply gloss on surface
Woodcrafter involves the following art:
1. Marquetry
2. Wood burning- pyrography
3. Woodcarving
4. Lacquer art
5. Carpentry
6. Cabinet making
7. Upholstery
8. Woodworking
Plumber:
1. Install pvs pipes for the access or portable water
2. Install kitchen and bathroom fixtures
3. Install pipes swage and wastewater
4. Solving pluming problems occur in swage lines
Upholster:
1.making padding for furniture’s. e.g., chairs settees etc...
2.Wrapping furniture’s with upholstery materials
3. sowing beads around seating on upholstery work
Electrician:
1. Runs conductors to accommodate electrical wires
2. Wire buildings for the access of electricity form the main
3. Troubles-shoot to detect electronical problems
4. Install socket plugs panel and electrical fixtures in the buildings
Carpenters:
1. line out the building
2. construct wooden frames and structures
3. make wooden roofs
4. make forms for columns and beams
5. make wooden support for trenches
masons:
1. lays blocks, bricks and stone walls
2. cast concrete foundations
3. cast beams and columns
4. plaster walls
5. rough cast walls
6. render walls
furniture maker:
1. make interior fixtures and furniture’s
2. make and install kitchen and bathroom cabinets
3. makes bed, chairs, tables etc.
welder:
1. cutting and framing metal pieces the use if an electric plant and
electrode (electric rode)
2. shape metal according to the prescribed drawing
3. repair metal items
4. test and inspect welded surface and structure for flaws
machine operator:
1. review drawings to ensure accurate production
2. take precise measurement for cutting and shaping
3. select suitable machine and setting for a given task
4. plan proper sequence of task to complete assignment
organizational chart
 tipper truck
the clerk of work is the architects representative on site