A. O. Smith
Phone: 1.866.362.9898
www.hotwater.com
Pro-Size Selection Report
May 13, 2024
Project Information
Project #:
Project Name:
Location:
Engineer:
Contractor:
CLUB DEPORTIVO
CLUB DEPORTIVO
TOLUCA
CARLOS V
Prepared for:
Prepared by:
Selected Product
DSE-65-75
Custom Xi
# Heaters:
Model Number:
Heater Storage (ea):
Input (ea):
2
DSE-65-75
65 USG
75.0 kW
Heater Recovery:
1st Hour Delivery:
3 Hour Average:
Est. Storage Recovery:
422 USGPH @ 100 °F Rise
2,606 USGPH
1,150 USGPH
388 min
New External Tanks:
Tank Capacity (ea):
Total Usable Storage:
0
0 USG
2184 USG
% Of Demand:
100%
·
·
·
·
·
·
·
·
Model Number
Hi Cube Trailer
Load Factor
Gallon
Capacity
Recovery
Capacity GPH
100 Degree Rise
Input KW
Height
Diameter
Approx. Shipping
Weight (lbs.)
DSE-65-75
0
65
614
75.0
53.5
26.5
294
Jacket with baked enamel finish
Magnetic contactors
Incoloy sheath immersion elements with prewired
terminal leads
120 volt fused control circuit
R-16 foam insulation
Drain valve and individual fusing when current
draw exceeds 120 amperes
CSA Certified and ASME Rated T&P Relief Valve
All models meet or exceed the thermal efficiency
and/or standby loss requirements of the U.S.
Department of Energy and current edition of
ASHRAE/IESNA 90.1
·
·
·
·
·
·
·
·
·
ASME Tank Construction
208, 240 and 480 Volt Single and Three-Phase
Glass-lined
150 PSI (5 thru 50 gallons)
125 PSI (65 thru 120 gallons)
Anodic protection
Terminal block on units with more than one
contactor
Immersion thermostat
High temperature cutoff (immersion)
Application Loads
Summary
Peak Demand:
2,600 USGPH
Temperature Rise:
100 °F
Cold Water Temp:
Stored Water Temp:
40 °F
140 °F
Application Settings
Type:
Building Use:
Peak Demand Period:
User-Supplied Demand
Not Specified
1.00 Hours
The A. O. Smith Pro-Size sizing program is a tool that can be used to estimate water heater requirements for many common applications. Pro-Size is intended to assist in selecting
water heaters or boilers that best meet the specific job requirements. It is the sole responsibility of the system designer to select the correct products needed for the specific application.
A. O. Smith reserves the right to make changes to Pro-Size without notice.
Page 1 of 2
May 13, 2024
Equipment:
Fuel Type:
Location:
LoNOx:
UltrasLowNOx:
ASME:
# Heaters:
Altitude:
Water Heaters with external
storage if required
Electric
Indoor
Not Required
Not Required
Not Required
Not Specified
7000 ft to 8000 ft
Approx. Storage:
# Storage Tanks:
Existing Storage:
100%
2
2600 USG
Load Data
Additional Load:
Design Oversize:
0 USGPH
0%
The A. O. Smith Pro-Size sizing program is a tool that can be used to estimate water heater requirements for many common applications. Pro-Size is intended to assist in selecting
water heaters or boilers that best meet the specific job requirements. It is the sole responsibility of the system designer to select the correct products needed for the specific application.
A. O. Smith reserves the right to make changes to Pro-Size without notice.
Page 2 of 2