TRANSFORMER TECHNICAL DATA SHEET PEL - PAK ELEKTRON LIMITED - LAHORE Customer: M/s Maddox, USA General Specification Rated Power [kVA] 2500 Vector Group Rated High Voltage [V] 12470 Connections [HV/LV] Rated Low Voltage [V] 480 Number of Phases [ɸ] 3 HV Bushings position Insulation Class A LV Bushings position No. of HV Taps 6 Winding Material [HV/LV] Taps [+%] 14400, 13800, 13200,12870 Taps [-%] 12000 Maximum Ambient Temp. [°C] Dyn 11 Delta/Star No. of Terminals [HV/LV] 6/4 Front Wall Front Wall Aluminium/Aluminium Service Altitude [m] <1000 Transformer Type 40 Oil immersed/Pad Mounted Installation Outdoor Temp. Rise (Oil/Winding) [K] 60/65 Oil Type Mineral Oil Type of Cooling ONAN Standard/Specs. ANSI / IEEE No-Load Loss [kW] 1.700 Load Loss at Principal Tap [kW] 17.00 Basic Insulation Level (BIL) [kV] Impedance [%] 5.75 Regulation (ΔV) at 1.0 PF & Rated Current HV Line Current [A] 115.75 Regulation (ΔV) at 0.8 PF & Rated Current 4.06% LV Line Current [A] 3007.03 Efficiency (ɳ) at 100% Load 1.0 PF 99.26% 60 Efficiency (ɳ) at 50% Load 1.0 PF 99.53% Technical Specifications Frequency [Hz] HV LI 95 LV LI 30 AC 34 AC 03 0.84% Mechanical Characteristics (dimensions will be provided at the time of approval) L - Length [mm] 2600 Total Mass [kg] W - Width [mm] 1380 Tank Type H - Height [mm] 1990 Paint Colour 12300 Compartmental Transformer Accessories 24kV 200A Bushing Wells with Inserts LV Bushings with 12 Hole Spades (NEMA Standards) Off Circuit Tap Changer with handle on side wall Earthing Terminals (SS) Lugs for lifting Complete Transformer Transport Pulling Eyes Display model is for illustration purpose. Rating & Diagram Plate(SS) Bay O Net Fuses with ISO links 2 Position Load Break Switches Oil Drain and Sampling Valve Oil Temperature Indicator (Qualitrol) Pressure Safety Valve (Qualitrol) Liquid Level Guage (Qualitrol) Pressure Vaccum Gauge (Qualitrol) Oil Filling Plug Pressed Steel Radiators with Imported Shutt-Off Valves Remarks: Routine test shall be conducted as per ANSI / IEEE at PEL Testing Lab. Tolerances applicable as per ANSI / IEEE. Prepared by: M. Ihtasham Tariq Approved by: Adnan Shahid Date: 01/Apr/2024 POWER DIVISION Approved 4/30/24 Ref: E24-317-A Sheet 01/01 Rev: 1 TRANSFORMER ENGINEERING DEPARTMENT WWW.PEL.COM.PK