®
Package Contents
Soundbar
AC-to-DC Power Adapter
T H E PERF ORM ANCE YO U NEED ®
AC Power Cord
32” Soundbar
Remote Control
SBT32210
Mounting Template
Please read this user’s guide before using your new
soundbar.
User’s Guide
RCA Cable
4000457
User’s Guide
Features
Provides powerful sound to enhance your listening
experience
Compatible with most Bluetooth®-enabled tablets,
laptops, MP3 players, and smartphones with iOS or
AndroidTM platform
Remote for convenient controlling from a distance
Important Safety Instructions
1. Read these instructions. Keep these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Do not use this soundbar near water.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
7. Do not install near any heat sources such as
radiators,heat registers,stoves,or other apparatus
(including amplifi ers) that produce heat.
8. Use only attachments/accessories specifi ed by the
manufacturer.
9. Protect the power cord from being walked on or
pinched, particularly at plugs, convenience receptacles,
and the point where they exit the soundbar.
10.Use only with the cart, stand, tripod,
bracket, or table specifi ed by the
manufacturer, or sold with the soundbar.
When a cart is used, use caution when
moving the cart/soundbar combination to
avoid injury from tip-over.
11.Unplug this soundbar during lightning storms or when
unused for long periods of time.
12.Refer all servicing to qualifi ed service personnel.
Servicing is required when the soundbar has been
damaged in any way, such as if the power-supply cord
or plug is damaged, liquid has been spilled or objects
have fallen into the soundbar, it has been exposed to
rain or moisture, it does not operate normally, or it has
been dropped.
2
2
Downloaded from www.Manualslib.com manuals search engine
3
3
Warnings and Precautions
To reduce the risk of electric shock, do not remove cover
(or back). There are no user-serviceable parts inside.
Do not expose the soundbar to dripping or splashing
liquids. Do not place objects fi lled with liquids (such as
vases) on the soundbar.
The mains plug is used as the disconnect device.
It shall remain readily operable and should not be
obstructed during intended use. To completely
disconnect the soundbar from supply mains, the main
plug of the product shall be disconnected from the
mains socket outlet completely.
Using the soundbar near fl uorescent lighting may cause
interference with the remote. If the soundbar is behaving
erratically, move away from any fl uorescent lighting.
Connections
Using the Soundbar
INPUT
Switch to LINE , AUX , OPTICAL , COAXIAL , or BLUETOOTH .
1. Turn on your device and turn down its volume.
Volume Control (+/–)
(G)
Power On/Off
EQ
Switch to MUSIC , MOVIE , NEWS , or GAME .
volume.
3. Press INPUT to switch to LINE, AUX, OPTICAL,
COAXIAL , or BLUETOOTH mode.
You can also press BLUETOOTH on the remote to
go to Bluetooth mode directly.
Mounting the Soundbar (Optional)
Mounting Holes (Optionally)
4. Press EQ to choose a sound option or press
DC IN
Use the AC-to-DC power adapter and AC
power cord to connect to a wall outlet.
5. After starting playback on your device, adjust
For mounting the soundbar, you may need a twist drill,
a marker pen or pencil, a bubble level, two screws, and
two drywall anchors (optional).
MUSIC, MOVIE, NEWS, or GAME on the remote.
You can customize each option by adjusting the bass
and treble sound levels, BASS +/– and TREBLE +/–.
the volume of the device and soundbar to a
comfortable level.
Enabling/Disabling Auto Power-Off
In standby mode, on the soundbar, press Volume
Control +, then INPUT followed by Volume Control –.
AUTO POWER OFF DISABLED or AUTO POWER OFF
ENABLED scrolls on the display.
1. Locate a place for mounting the soundbar. Make sure
you have enough room for both ends of the soundbar
to present unobstructed sound transmission.
LINE IN Port Connection
Use a 3.5mm audio cable (not
supplied) to connect to an
additional audio device.
2. Use the supplied mounting template to mark
two screw hole positions. Use two screws (not
supplied) with heads no bigger than the soundbar’s
mounting holes.
To an optical port (optical cable not supplied)
To a coaxial port (coaxial cable not supplied)
3. Align the soundbar’s mounting holes with the screw
AUX IN Ports Connection
Use the RCA cable to connect to a
TV, DVD player, game system, etc.
heads and slide down to secure the soundbar.
4
4
2. Press G to turn on the soundbar, and turn down its
5
5
n Note: When using the soundbar’s optical or coaxial
input, change the digital audio setting of the connected
device to PCM. Otherwise, you will hear no sound.
6
6
When auto power-off is enabled, the soundbar enters
standby mode if:
You pause the soundbar for over 15 minutes, or
Bluetooth connection is broken for 15 minutes, or
There is no signal input for 15 minutes.
7
7
Using the Bluetooth Function
1. After you turn on the soundbar and switch to
Bluetooth mode (BLUETOOTH scrolls on the display),
the soundbar searches for a Bluetooth-enabled
device (BT PAIRING scrolls on the display).
2. Activate your device’s Bluetooth function (refer to
your device’s user’s guide).
3. When AUVIO SBT32210 appears in the Bluetooth
devices list, pair it to your device. If you are
prompted for a PIN, enter 0000.
Using the Remote Control
1. Open the battery compartment
and install two AAA batteries
(not included), matching the
polarity symbols (+ and –)
marked inside.
2. Point the remote at the center
of the soundbar to control it.
n Note: During Bluetooth connection, if you need to
pair your soundbar to other Bluetooth devices, press
and hold the BLUETOOTH button on the remote. The
current Bluetooth connection is interrupted, and the
soundbar starts searching for other Bluetooth devices.
Battery Notes:
Use only fresh batteries of the required size and
type. Dispose of batteries promptly and properly.
Do not burn or bury them.
8
8
Weight (soundbar) .........................................6.1 lb (2.74kg)
Power On/Off (G)
BLUETOOTH
Go to BLUETOOTH mode.
MUTE
Turn sound on or off.
INPUT
Switch among LINE, AUX,
OPTICAL, and COAXIAL
mode.
DIM
Adjust screen brightness.
Specifi cations are subject to change and improvement without
notice. Actual product may vary from the images found in this
document.
Troubleshooting
Power Input ....................................................DC 18V, 3.6A
Output (RMS) ............... 55W (15W × 2 + 25W Subwoofer)
Frequency Response ...................................60 Hz – 18 kHz
Drivers ............................................. 75mm × 2, 70mm × 2
Bluetooth Connection Range........................... 30 ft. (9.1m)
Bluetooth Protocol............................... V2.1 + EDR Class 2
Dimensions (WHD)................................... 32 × 4.3 × 3.8 in
............................................................ (810 × 110 × 98mm)
Solution
Make sure the AC power cord is plugged
into a working outlet and fi rmly connected to
the soundbar.
Check the connection of your device to the
soundbar.
Check your source device to see if it is causing
Distorted
the distortion. Set the device and soundbar
sound
volume to a low level.
If the volume remains low even when the
soundbar’s volume is turned all the way up,
Unbalanced
check the source device to make sure it is
sound
connected via a variable output. Make sure the
output is not turned down too low.
Avoid electromagnetic interference or
interference caused by other Bluetooth devices.
Make sure your Bluetooth device supports
audio transfer, is discoverable and has its
volume turned up.
If the connected device moves too far away
from the soundbar, the soundbar disconnects
Bluetooth
from the device. Move the device close. The
function
connection resumes automatically.
failure
In Bluetooth mode but without Bluetooth
connection, press and hold EQ on the soundbar
to clear the list of devices paired to the soundbar.
Then pair the soundbar to your device again.
Disconnect power, then connect power
again and turn on the soundbar.
9
9
10
10
VOL +/–
/
Go to previous/next track.
MUSIC, MOVIE,
NEWS, GAME
Equalizer sound options.
§
Play/Pause.
BASS +/–
Adjust the bass tone.
TREBLE +/–
Adjust the treble tone.
Do not mix old and new batteries, different types
of batteries (standard, alkaline, or rechargeable), or
rechargeable batteries of different capacities.
If you do not plan to use the remote control for a
long time, remove the batteries. Batteries can leak
chemicals that can damage electronic parts.
Specifi cations
Problem
No sound
and display
Downloaded from www.Manualslib.com manuals search engine
FCC Information
Limited Warranty
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
If you cannot eliminate the interference, the FCC requires that
you stop using your product. Changes or modifi cations not
expressly by the party responsible for compliance could void
the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Ignition L.P. warrants this product against defects in materials
and workmanship under normal use by the original purchaser
for one (1) year after the date of purchase. IGNITION L.P.
MAKES NO OTHER EXPRESS WARRANTIES.
This warranty does not cover: (a) damage or failure caused by
or attributable to abuse, misuse, failure to follow instructions,
improper installation or maintenance, alteration, accident,
Acts of God (such as fl oods or lightning), or excess voltage
or current; (b) improper or incorrectly performed repairs by
persons who are not a Ignition L.P. Authorized Service Facility;
(c) consumables such as fuses or batteries; (d) ordinary wear
and tear or cosmetic damage; (e) transportation, shipping
or insurance costs; (f) costs of product removal, installation,
set-up service, adjustment or reinstallation; and (g) claims by
persons other than the original purchaser.
Should a problem occur that is covered by this warranty, take
the product and the sales receipt as proof of purchase date
to the place of purchase. Ignition L.P. will, at its option, unless
otherwise provided by law: (a) repair the product without
charge for parts and labor; (b) replace the product with the
same or a comparable product; or (c) refund the purchase
price. All replaced parts and products, and products on which
a refund is made, become the property of Ignition L.P. New
or reconditioned parts and products may be used in the
performance of warranty service. Repaired or replaced parts
and products are warranted for the remainder of the original
warranty period. You will be charged for repair or replacement
of the product made after the expiration of the warranty
period.
IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES
AND CONDITIONS NOT STATED IN THIS LIMITED
WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE
IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY
OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED
11
11
12
12
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE,
SHALL EXPIRE ON THE EXPIRATION OF THE STATED
WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE
NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF
THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH
RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED
DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE
OF THE PRODUCT OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO,
ANY DAMAGES RESULTING FROM INCONVENIENCE AND
ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR
PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, EVEN IF IGNITION L.P. HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions
may not apply to you. This warranty gives you specifi c legal
rights, and you may also have other rights which vary from
state to state. You may contact Ignition L.P. at:
Ignition L.P.,
3102 Maple Ave., Suite 450,
Dallas, TX 75201
02/09
For product support, call
1-866-315-0426
Complies with the European Union’s “Restriction of Hazardous
Substances Directive,” which protects the environment by
restricting specifi c hazardous materials and products.
The Bluetooth® word mark and logos are owned by Bluetooth SIG,
Inc. and any use of such marks by Ignition L.P. is under license. Other
trademarks and trade names are those of their respective owners.
Android is a trademark of Google Inc.
IOS is a trademark or registered trademark of Cisco in the U.S.
and other countries and is used under license.
© 2013. Ignition L.P. All rights reserved. Auvio is
a registered trademark used by Ignition L.P.
Package and user documentation are recyclable.
User documentation contains recycled material.
13
13
14
14
Printed
in China
12B13
4000457