Notice Inviting Tender Details Tender Information KHB/2023-24/BD/WORK_INDENT225 Name Construction of office building for Greater Bangaluru - Bidadi Smart City Planning Authority at Bidadi, Ramanagara District Tender Scope Construction of office building for Greater Bangaluru - Bidadi Smart City Planning Authority at Bidadi, Ramanagara District Category Works Procuring Entity Karnataka Housing Board Location Name KHB Central Office Bengaluru ur em en t Tender Number Multiple Currencies Allowed No Published Date 16-03-2024 13:44:11 ECV/Non-ECV Non-ECV Commerical Bid Type Evaluation Type Two Cover Tender Type Open Tender Amount(INR) Denomination Type Item wise --- Rupees Highest Bidder Selection No Technical Weightage Required No No of Calls 1 Tax Type ro c File Number Inclusive Tax Publish Type 725/2022-23 Request for Quotation (RFQ) General Conditions of Eligibility Tenders from Joint ventures are not acceptable. Condition 2 Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka Condition 3 Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document. Condition 4 The tender document is part and parcel of the agreement. Condition 5 The contractor shall obtain insurance coverage for all the workers deployed for this work. Condition 6 Further details of the work or any clarifications can be obtained from the office of the Executive Engineer (Central office), KHB, Cauvery Bhavan, K.G. Road, Bangalore Ph: 080-22273511 ext-317, ep Condition 1 1 of 135 The intending bidders are requested to note that they should abide by the detailed instructions and conditions contained in the Tender documents and further modifications done if any. Condition 8 Corrigendum/modification/corrections, if any, will be published in the e procurement Web sites only. Condition 9 KHB reserves the right to withdraw or cancel this invitation to BID/Tender without assigning any reason whatsoever Condition 10 The bidder shall study the Tender document Carefully and quote the rates Condition 11 All scanned documents to be uploaded shall be in original and are to be produced to the Executive Engineer to verify the documents within 3 days from the day of opening of Technical bid for verification, if required. Condition 12 Drawings uploaded are only for Tender Purpose only. Condition 13 GST shall be added separately in the estimate. Condition 14 GST shall be paid to the tendered amount separately. Condition 15 The bidder should maintain register of laborers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved. Condition 16 The bidder shall give an undertaking that they would abide by the provisions of employees provident fund and shall remit PF of labourers to the respective PF offices or else KHB have the right to deduct the PF amount from the work bills and remit the same to respective PF offices. Condition 17 The contractor shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time Condition 18 The successful bidder shall give an under taking that they would abide by the provisions of the Employees Provident Fund Act. ro c ur em en t Condition 7 Technical Criteria S.No Criterion Type Criterion Description 1 --- Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs) --- Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender) ep 2 3 --- Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction) 4 --- Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and Criterion Documents 2 of 135 should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year --- Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year 6 --- Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx) 7 --- Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period) 8 --- 9 --- 10 --- 11 --- 12 --- 13 --- 15 17 ur em List of existing commitments and ongoing works List of works for which tenders already submitted Banker Details for reference Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years --- Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded --- List of Financial Resources with Certificates Capabilities of Vendor Scanned Copy of documentary proof for having executed similar nature of work not less than 50% of tender amount as defined in Government order No.FD 480 EXP-12/2014,Bangalore dated:19.07.2014 Work Done Certificate Scanned copy of Pre-qualification letter issued by Karnataka Housing Board. Others -Scanned copy of Prequalification letter issued by Karnataka Housing Board. ep 16 Total value of civl engineering works executed and payments received in the last five years (year-wise) ro c 14 en t 5 Capabilities of Vendor 3 of 135 Capabilities of Vendor As per Tender Documents KW-4 clause 3.3 key & critical equipments available. 19 Capabilities of Vendor Executed in any one Financial year, the minimum quantities of work as mentioned in tender document 20 Capabilities of Vendor Required valid electrical license for executing similar nature of work as per tender document Others -Required valid electrical license for executing similar nature of work as per tender document 21 Capabilities of Vendor The Tenderer should have executed similar water supply/sanitary engineering works as per tender document Others -- The Tenderer should have executed similar water supply/sanitary engineering works as per tender document ur em Others -Executed in any one Financial year, the minimum quantities of work as mentioned in tender document Financial Status Income Tax returns & PAN ITR Filed Copy (Mentioning PAN) Financial Status GST Registration Certificate GST Registration ep 23 ro c 22 Others -- As per Tender Documents KW-4 clause 3.3 key & critical equipments available. en t 18 24 Financial Status To qualify for award of this contract , each tenderer in its name should have in the last five years achieved in at least two financial years a minimum financial turnover (In all classes of civil engineering construction works only) Audited CA Certificate of Annual Turnover 25 Financial Status Scanned copy of Credit lines/ letter of credit /Bankers certificate for at least 20% of Line of Credit 4 of 135 amount put to tender in the current financial year on the name of work put to tender. Financial Status Scanned copy of latest GST clearance certificate. Others -Scanned copy of latest GST clearance certificate. 27 Financial Status Assessed Available Bid Capacity as per tender document Others -Assessed Available Bid Capacity as per tender document 28 Others Covering letter. Others -Covering letter. ur em en t 26 Documents Required from the Bidder Document Type Document Name Document is Mandatory 1 Technical Bid Annual Turnover Certificate Yes 2 Technical Bid Company Registration Certificate No 3 Technical Bid Reserved Category Certificate No 4 Technical Bid Small Scale Industries Certificate No 5 Technical Bid Work done certificate Yes 6 Technical Bid key and critical equipment LIST Yes 7 Technical Bid Income Tax returns & PAN no. Yes 8 Technical Bid Pre-qualification certificate issued by KHB Yes 9 Technical Bid GST clearance certificate Yes Technical Bid Credit lines/ letter of credit/Bankers certificate Yes Technical Bid Assessed available tender capacity calculation Yes Technical Bid Electrical license Yes Technical Bid Work done certificate with quantities Yes 10 11 12 ep 13 ro c S.No Sub Estimates SubEstimate :1 S.No Category of works Name of works Merged (yes/no) Estimate Value Created Date 1 Buildings Construction of office building for No 35569147.5 16-03-2024 5 13:11:52 5 of 135 Items Item :1 en t Greater Bangaluru - Bidadi Smart City Planning Authority at Bidadi, Ramanagara District code01 Description Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. In area of light jungle SR item(yes/no) No Quantity 6.693 Minimum Quantity BuyBack Item Item :2 Item Category --- ur em Item Code Unit --- Sqm Maximum Quantity --- Item Category --- No code02 Description Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m consider hard soil 70% of total excavation qty ro c Item Code SR item(yes/no) No Quantity 914.74 Minimum Quantity BuyBack Item --- Unit Cum Maximum Quantity --- Item Category --- No ep Item :3 Item Code code03 Description In ordinary/soft rock without blasting, Depth exceeding 1.5 m, but not exceeding 3 m consider 25% of total excavation qty SR item(yes/no) No Quantity 326.69 Minimum Quantity Unit --- Maximum Quantity Cum --- 6 of 135 BuyBack Item No Item :4 code04 Description Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work In Hard Rock ( requiring blasting) Depth upto 1.50m consider 5% of total excavation qty SR item(yes/no) No Quantity 65.34 BuyBack Item Item :5 Unit --- Cum ur em Minimum Quantity Item Category en t Item Code --- Maximum Quantity --- Item Category --- No Item Code code05 Description Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. SR item(yes/no) No Quantity 40.97 Minimum Quantity --- Cum Maximum Quantity --- Item Category --- No ro c BuyBack Item Unit Item :6 code06 Description Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. ep Item Code SR item(yes/no) No Quantity 288 Minimum Quantity BuyBack Item Unit --- Maximum Quantity Sqm --- No 7 of 135 Item :7 code07 Description Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work ( up to 20km) SR item(yes/no) No Quantity 864 Minimum Quantity BuyBack Item Item Category Unit --- --- en t Item Code Cum Maximum Quantity --- Item Category --- No Item :8 code08 Description Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm and down size graded crushed coarse aggregates SR item(yes/no) No Quantity 114.61 Minimum Quantity BuyBack Item Unit --- Cum Maximum Quantity --- Item Category --- No ro c Item :9 ur em Item Code code09 Description Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates consider 8% of finished rate of concrete for foundation upto plitnth shuttering (footing) ep Item Code SR item(yes/no) No Quantity 179.57 Minimum Quantity BuyBack Item Unit --- Maximum Quantity Cum --- No 8 of 135 Item :10 code10 Description Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates consider 50% of finished rate of concrete for plinth beam shuttering SR item(yes/no) No Quantity 100.36 BuyBack Item Item :11 Unit --- Cum ur em Minimum Quantity Item Category en t Item Code --- Maximum Quantity --- Item Category --- No code11 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates consider 70% of finished rate of concrete for column shuttering ro c Item Code SR item(yes/no) No Quantity 12.94 Minimum Quantity BuyBack Item --- Unit Cum Maximum Quantity --- Item Category --- No ep Item :12 Item Code code12 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost 9 of 135 SR item(yes/no) No Quantity 18.91 Minimum Quantity BuyBack Item Unit --- en t of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates consider 60% of finished rate of concrete for roof beam shuttering Cum Maximum Quantity --- Item Category --- No Item :13 code13 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates consider 50% of finished rate of concrete for roof slab shuttering SR item(yes/no) No Quantity 43.2 Minimum Quantity Unit --- Cum Maximum Quantity --- Item Category --- No ro c BuyBack Item ur em Item Code Item :14 code14 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates consider 60% of finished rate of concrete for linte lshuttering ep Item Code SR item(yes/no) No Quantity 0.75 Minimum Quantity Unit --- Maximum Quantity Cum --- 10 of 135 BuyBack Item No Item :15 code15 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates consider 45% of finished rate of concrete for ramp shuttering SR item(yes/no) No Quantity 12.25 BuyBack Item Item :16 Unit --- Cum ur em Minimum Quantity Item Category en t Item Code --- Maximum Quantity --- Item Category --- No code16 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates consider 50% of finished rate of concrete for staircase shuttering ro c Item Code SR item(yes/no) No Quantity 3.91 Minimum Quantity BuyBack Item --- Unit Cum Maximum Quantity --- Item Category --- No ep Item :17 Item Code code17 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, 11 of 135 SR item(yes/no) No Quantity 17.33 Minimum Quantity BuyBack Item Unit --- en t providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates GROUND FLOOR consider 70% of finished rate of concrete for column shuttering Cum Maximum Quantity --- Item Category --- No Item :18 code18 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates GROUND FLOOR consider 60% of finished rate of concrete for roof beam shuttering SR item(yes/no) No Quantity 25.73 Unit --- ro c Minimum Quantity ur em Item Code BuyBack Item Cum Maximum Quantity --- Item Category --- No Item :19 code19 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates GROUND FLOOR consider 50% of finished rate of concrete for roof slab shuttering ep Item Code SR item(yes/no) No Quantity 47.72 Unit Cum 12 of 135 Minimum Quantity BuyBack Item --- Maximum Quantity --- No en t Item :20 code20 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates GROUND FLOOR consider 60% of finished rate of concrete for linte lshuttering SR item(yes/no) No Quantity 5.21 Minimum Quantity BuyBack Item Item :21 Item Category --- ur em Item Code Unit --- Cum Maximum Quantity --- Item Category --- No code21 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates GROUND FLOOR consider 45% of finished rate of concrete for chejja shuttering ro c Item Code SR item(yes/no) No Quantity 6.12 ep Minimum Quantity BuyBack Item --- Unit Cum Maximum Quantity --- Item Category --- No Item :22 Item Code code22 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The 13 of 135 SR item(yes/no) No Quantity 5.66 Minimum Quantity Item :23 --- Cum Maximum Quantity No --- ur em BuyBack Item Unit en t granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates GROUND FLOOR consider 50% of finished rate of concrete for staricase shuttering Item Code code23 Item Category Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates GROUND FLOOR consider 50% of finished rate of concrete for shear wall shuttering SR item(yes/no) No Quantity 6.15 ro c Unit Minimum Quantity BuyBack Item --- --- Cum Maximum Quantity --- Item Category --- No Item :24 code24 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FIRST FLOOR consider 70% of finished rate of concrete for column shuttering ep Item Code 14 of 135 SR item(yes/no) No Quantity 17.33 BuyBack Item --- Cum Maximum Quantity --- en t Minimum Quantity Unit No Item :25 code25 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FIRST FLOOR consider 60% of finished rate of concrete for roof beam shuttering SR item(yes/no) No Quantity 21.24 Minimum Quantity BuyBack Item Item :26 Item Category --- ur em Item Code Unit --- Cum Maximum Quantity --- Item Category --- No code26 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FIRST FLOOR consider 50% of finished rate of concrete for roof slab shuttering ro c Item Code No Quantity 43.2 ep SR item(yes/no) Minimum Quantity BuyBack Item --- Unit Cum Maximum Quantity --- Item Category --- No Item :27 Item Code code27 15 of 135 Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FIRST FLOOR consider 60% of finished rate of concrete for linte lshuttering SR item(yes/no) No Quantity 4.69 BuyBack Item Item :28 --- Cum Maximum Quantity --- Item Category --- ur em Minimum Quantity Unit en t Description No code28 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FIRST FLOOR consider 45% of finished rate of concrete for chejja shuttering ro c Item Code SR item(yes/no) No Quantity 6.12 Minimum Quantity BuyBack Item --- Unit Cum Maximum Quantity --- Item Category --- No Item :29 code29 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 ep Item Code 16 of 135 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FIRST FLOOR consider 50% of finished rate of concrete for staricase shuttering No Quantity 5.66 Minimum Quantity BuyBack Item Unit --- Cum en t SR item(yes/no) Maximum Quantity --- Item Category --- No Item :30 code30 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates FIRST FLOOR consider 50% of finished rate of concrete for shear wall shuttering SR item(yes/no) No Quantity 6.15 Minimum Quantity BuyBack Item Item :31 ur em Item Code Unit --- Cum Maximum Quantity --- Item Category --- No code31 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates TERRACE FLOOR consider 70% of finished rate of concrete for column shuttering ep ro c Item Code SR item(yes/no) No Quantity 6.24 Minimum Quantity BuyBack Item Unit --- Maximum Quantity Cum --- No 17 of 135 Item :32 code32 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates TERRACE FLOOR consider 60% of finished rate of concrete for roof beam shuttering SR item(yes/no) No Quantity 2.18 BuyBack Item Item :33 Unit --- Cum ur em Minimum Quantity Item Category en t Item Code --- Maximum Quantity --- Item Category --- No code33 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates TERRACE FLOOR consider 50% of finished rate of concrete for roof slab shuttering ro c Item Code SR item(yes/no) No Quantity 4.07 Minimum Quantity BuyBack Item --- Unit Cum Maximum Quantity --- Item Category --- No ep Item :34 Item Code code34 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost 18 of 135 SR item(yes/no) No Quantity 0.45 Minimum Quantity BuyBack Item Unit --- en t of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates TERRACE FLOOR consider 60% of finished rate of concrete for linte lshuttering Cum Maximum Quantity --- Item Category --- No Item :35 code35 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates TERRACE FLOOR consider 45% of finished rate of concrete for chejja shuttering SR item(yes/no) No Quantity 0.16 Minimum Quantity Unit --- Cum Maximum Quantity --- Item Category --- No ro c BuyBack Item ur em Item Code Item :36 code36 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates TERRACE FLOOR consider 50% of finished rate of concrete for shear wall shuttering ep Item Code SR item(yes/no) No Quantity 7.38 Minimum Quantity Unit --- Maximum Cum --19 of 135 Quantity BuyBack Item No Item :37 code37 Description Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) SR item(yes/no) No Quantity 35.53 BuyBack Item Item :38 Unit --- --- t Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category en t Item Code No Item Code code38 Description Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) G.F SR item(yes/no) No Quantity 16.26 Minimum Quantity --- t Maximum Quantity --- Item Category --- No ro c BuyBack Item Unit Item :39 code39 Description Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) F.F SR item(yes/no) No Quantity 15.49 ep Item Code Minimum Quantity BuyBack Item --- Unit t Maximum Quantity --- Item Category --- No Item :40 Item Code code40 20 of 135 Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) TERRACE SR item(yes/no) No Quantity 3.33 Minimum Quantity BuyBack Item Unit --- en t Description t Maximum Quantity --- Item Category --- No Item :41 code41 Description Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. SR item(yes/no) No Quantity 33.78 Minimum Quantity BuyBack Item Item :42 ur em Item Code Unit --- Sqm Maximum Quantity --- Item Category --- No code42 Description Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. G.F ro c Item Code SR item(yes/no) No Quantity 503.82 Minimum Quantity Sqm Maximum Quantity --- Item Category --- No ep BuyBack Item --- Unit Item :43 Item Code code43 Description Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. F.F 21 of 135 SR item(yes/no) No Quantity 494.31 BuyBack Item --- Sqm Maximum Quantity --- en t Minimum Quantity Unit No Item :44 code44 Description Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. TERRACE SR item(yes/no) No Quantity 124.1 Minimum Quantity BuyBack Item Item :45 Item Category --- ur em Item Code Unit --- Sqm Maximum Quantity --- Item Category --- No Item Code code45 Description Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. SR item(yes/no) No Quantity 85.65 ro c Unit Minimum Quantity BuyBack Item --- Sqm Maximum Quantity --- Item Category --- No Item :46 code46 Description Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ep Item Code SR item(yes/no) No Quantity 34.05 Minimum Quantity BuyBack Item Unit --- Maximum Quantity Sqm --- No 22 of 135 Item :47 code47 Description Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. SR item(yes/no) No Quantity 0.36 Minimum Quantity BuyBack Item Item Category Unit --- --- en t Item Code Cum Maximum Quantity No ur em Item :48 --- Item Code code48 Description Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. SR item(yes/no) No Quantity 0.4 Minimum Quantity BuyBack Item Item :49 Item Category Unit --- --- Cum Maximum Quantity --- Item Category --- No code49 Description Providing Red Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. ro c Item Code SR item(yes/no) No Quantity 0.53 Minimum Quantity BuyBack Item --- Unit Cum Maximum Quantity --- Item Category --- No ep Item :50 Item Code code50 Description Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. 23 of 135 from manufacturer complete as per spcification. -do- 35 mm thick both side commercial No Quantity 4.98 Minimum Quantity BuyBack Item Unit --- Sqm en t SR item(yes/no) Maximum Quantity --- Item Category --- No Item :51 code51 Description Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial SR item(yes/no) No Quantity 7.2 Minimum Quantity BuyBack Item Item :52 ur em Item Code Unit --- Sqm Maximum Quantity --- Item Category --- No code52 Description Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick both side commercial ro c Item Code SR item(yes/no) No Quantity 9.6 Minimum Quantity Sqm Maximum Quantity --- Item Category --- No ep BuyBack Item --- Unit Item :53 Item Code code53 Description Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as 24 of 135 per manufacturers specification & direction of Engineer-in-charge. No Quantity 34.2 Minimum Quantity BuyBack Item Unit --- m Maximum Quantity --- Item Category --- en t SR item(yes/no) No Item :54 code54 Description Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge. SR item(yes/no) No Quantity 17.1 Minimum Quantity BuyBack Item Item :55 ur em Item Code Unit --- m Maximum Quantity --- Item Category --- No code55 Description Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges -do- with both side prelam ro c Item Code SR item(yes/no) No Quantity 9.45 --- ep Minimum Quantity BuyBack Item Unit Sqm Maximum Quantity --- Item Category --- No Item :56 Item Code code56 Description Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to 25 of 135 SR item(yes/no) No Quantity 4.73 Minimum Quantity --- Maximum Quantity No Item :57 Sqm --- ur em BuyBack Item Unit en t form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges -do- with both side prelam Item Code code57 Description Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications SR item(yes/no) No Quantity 2 Minimum Quantity BuyBack Item Item Category Unit --- --- Nos Maximum Quantity --- Item Category --- No Item :58 code58 Description Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications SR item(yes/no) No Quantity 9 ep ro c Item Code Minimum Quantity BuyBack Item --- Unit Nos Maximum Quantity --- Item Category --- No Item :59 Item Code code59 Description Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding 26 of 135 SR item(yes/no) No Quantity 7 Minimum Quantity BuyBack Item Unit --- en t holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications Nos Maximum Quantity --- Item Category --- No Item :60 code60 Description Providing & fixing of 3track x 2panel sliding windows made out of multi chambered UPVC(Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile throughout the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) SR item(yes/no) No Quantity 1.8 Unit --- ro c Minimum Quantity ur em Item Code BuyBack Item Sqm Maximum Quantity --- Item Category --- No Item :61 code61 Description Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ep Item Code 27 of 135 SR item(yes/no) No Quantity 42.12 BuyBack Item --- Sqm Maximum Quantity --- en t Minimum Quantity Unit No Item :62 code62 Description Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size 2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) SR item(yes/no) No Quantity 37.26 Minimum Quantity BuyBack Item Item :63 Item Category --- ur em Item Code Unit --- Sqm Maximum Quantity --- Item Category --- No code63 Description Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) ep ro c Item Code SR item(yes/no) No Quantity 4.32 Minimum Quantity BuyBack Item Unit --- Sqm Maximum Quantity --- Item Category --- No Item :64 Item Code code64 28 of 135 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) SR item(yes/no) No Quantity 1.62 BuyBack Item Item :65 --- Sqm Maximum Quantity --- Item Category --- ur em Minimum Quantity Unit en t Description No Item Code code65 Description Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. SR item(yes/no) No Quantity 29.34 --- ro c Minimum Quantity Unit BuyBack Item Sqm Maximum Quantity --- Item Category --- No Item :66 code66 Description Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ep Item Code SR item(yes/no) No Quantity 20.88 Minimum Quantity BuyBack Item Unit --- Maximum Quantity Sqm --- No 29 of 135 Item :67 code67 Description Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 31.29 Minimum Quantity Item :68 Unit --- --- Sqm Maximum Quantity No --- ur em BuyBack Item Item Category en t Item Code Item Code code68 Description Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 1134.14 Minimum Quantity BuyBack Item Item :69 Item Category Unit --- --- Sqm Maximum Quantity --- Item Category --- No code69 Description Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 1000.11 ro c Item Code --- ep Minimum Quantity BuyBack Item Unit Sqm Maximum Quantity --- Item Category --- No Item :70 Item Code code70 Description Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and 30 of 135 removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. No Quantity 94.35 Minimum Quantity BuyBack Item Unit --- Sqm en t SR item(yes/no) Maximum Quantity --- Item Category --- No Item :71 code71 Description Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 204 Minimum Quantity BuyBack Item Item :72 ur em Item Code Unit --- Sqm Maximum Quantity --- Item Category --- No code72 Description Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. ro c Item Code SR item(yes/no) No Quantity 575.78 Minimum Quantity Sqm Maximum Quantity --- Item Category --- No ep BuyBack Item --- Unit Item :73 Item Code code73 Description Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including 31 of 135 cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. No Quantity 575.78 Minimum Quantity BuyBack Item Unit --- Sqm en t SR item(yes/no) Maximum Quantity --- Item Category --- No Item :74 code74 Description Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 245 Minimum Quantity BuyBack Item Item :75 ur em Item Code Unit --- Sqm Maximum Quantity --- Item Category --- No code75 Description Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers including cost of material etc as per specifications and as per directions of the EngineerinCharge. ro c Item Code SR item(yes/no) No Quantity 1164 Minimum Quantity BuyBack Item --- Unit Kg Maximum Quantity --- Item Category --- No Item :76 code76 ep Item Code Description Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 227.28 Unit Sqm 32 of 135 Minimum Quantity Maximum Quantity --- No Item :77 en t BuyBack Item --- Item Code code77 Description Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 157.44 BuyBack Item Item :78 Unit --- Sqm ur em Minimum Quantity Item Category --- Maximum Quantity --- Item Category --- No Item Code code78 Description Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Enginer-in-charge. SR item(yes/no) No Quantity 45 --- ro c Minimum Quantity Unit BuyBack Item Sqm Maximum Quantity --- Item Category --- No Item :79 code79 Description Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Enginer-in-charge. ep Item Code SR item(yes/no) No Quantity 38.34 Minimum Quantity BuyBack Item Unit --- Sqm Maximum Quantity --- Item Category --- No Item :80 Item Code code80 33 of 135 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 6.8 Minimum Quantity BuyBack Item Unit --- en t Description Sqm Maximum Quantity --- Item Category --- No Item :81 code81 Description Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 8.52 Minimum Quantity BuyBack Item Item :82 Unit --- Sqm Maximum Quantity --- Item Category --- No code82 ro c Item Code ur em Item Code Description Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 8.52 ep Minimum Quantity BuyBack Item --- Unit Sqm Maximum Quantity --- Item Category --- No Item :83 Item Code code83 Description Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special 34 of 135 SR item(yes/no) No Quantity 625.29 Minimum Quantity BuyBack Item Unit --- en t primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm Maximum Quantity --- Item Category --- No Item :84 code84 Description Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 1728.14 Minimum Quantity BuyBack Item Item :85 ur em Item Code Unit --- Sqm Maximum Quantity --- Item Category --- No code85 Description Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 1594.11 ro c Item Code ep Minimum Quantity BuyBack Item --- Unit Sqm Maximum Quantity --- Item Category --- No Item :86 Item Code code86 Description Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat of Special 35 of 135 SR item(yes/no) No Quantity 126.85 Minimum Quantity BuyBack Item Unit --- en t primer applied @ 0.75 ltr /10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Sqm Maximum Quantity --- Item Category --- No Item :87 code87 Description Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. SR item(yes/no) No Quantity 625.29 Minimum Quantity BuyBack Item Item :88 ur em Item Code Unit --- Sqm Maximum Quantity --- Item Category --- No code88 Description Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. ro c Item Code SR item(yes/no) No Quantity 1728.14 Minimum Quantity BuyBack Item --- Unit Sqm Maximum Quantity --- Item Category --- No Item :89 code89 ep Item Code Description Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. SR item(yes/no) No Quantity 1594.11 Minimum Quantity Unit --- Maximum Sqm --36 of 135 Quantity BuyBack Item No Item :90 code90 Description Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. SR item(yes/no) No Quantity 126.85 BuyBack Item Item :91 Unit --- --- Sqm Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category en t Item Code No Item Code code91 Description Providing Lath plaster with cement mortar 1:3 5cm thick with 6mm dia mild steel bars at 20cms. C to c both horizontally and vertically fixing chicken mesh for drop chejjas, facia, backing to cup board including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specification. SR item(yes/no) No Quantity 18 Minimum Quantity BuyBack Item --- Sqm Maximum Quantity --- Item Category --- No ro c Item :92 Unit code92 Description Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 786 ep Item Code Minimum Quantity BuyBack Item --- Unit Sqm Maximum Quantity --- Item Category --- No Item :93 Item Code code93 37 of 135 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 575.78 Minimum Quantity Item :94 --- Sqm Maximum Quantity No --- ur em BuyBack Item Unit en t Description Item Code code94 Description Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 575.78 Minimum Quantity BuyBack Item Unit --- --- Sqm Maximum Quantity --- Item Category --- No ro c Item :95 Item Category code95 Description Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 245 ep Item Code Minimum Quantity BuyBack Item --- Unit Sqm Maximum Quantity --- Item Category --- No Item :96 Item Code code96 38 of 135 Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. SR item(yes/no) No Quantity 8.34 Minimum Quantity BuyBack Item Unit --- en t Description Sqm Maximum Quantity --- Item Category --- No Item :97 code97 Description Providing and laying flooring and steps machine cut granite slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , including cost of materials, mortar labour, curing complete as per specifications. SR item(yes/no) No Quantity 6 Minimum Quantity BuyBack Item Item :98 ur em Item Code Unit --- Sqm Maximum Quantity --- Item Category --- No code98 Description Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. ro c Item Code SR item(yes/no) No Quantity 15.5 Minimum Quantity BuyBack Item --- Unit Sqm Maximum Quantity --- Item Category --- No Item :99 code99 Description Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. SR item(yes/no) No ep Item Code Unit Sqm 39 of 135 146.73 Minimum Quantity BuyBack Item --- Maximum Quantity --- No Item :100 en t Quantity Item Code code100 Description Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. SR item(yes/no) No Quantity 212.74 BuyBack Item Item :101 Unit --- Sqm ur em Minimum Quantity Item Category --- Maximum Quantity --- Item Category --- No code101 Description Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. SR item(yes/no) No Quantity 109.28 ro c Item Code Minimum Quantity BuyBack Item --- Unit Sqm Maximum Quantity --- Item Category --- No Item :102 code102 Description Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. ep Item Code SR item(yes/no) No Unit Sqm 40 of 135 184.31 Minimum Quantity BuyBack Item --- Maximum Quantity --- No en t Quantity Item :103 code103 Description Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent. SR item(yes/no) No Quantity 117.88 Minimum Quantity BuyBack Item Item :104 Item Category --- ur em Item Code Unit --- Sqm Maximum Quantity --- Item Category --- No code104 Description Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. ro c Item Code SR item(yes/no) No Quantity 32.85 Minimum Quantity BuyBack Item --- Unit Sqm Maximum Quantity --- Item Category --- No Item :105 code105 Description Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including pointing the joints with white cement and matching pigments etc., complete. SR item(yes/no) No Quantity 10.2 ep Item Code Unit Sqm 41 of 135 Minimum Quantity Maximum Quantity --- No Item :106 en t BuyBack Item --- Item Code code106 Description Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. SR item(yes/no) No Quantity 227.28 BuyBack Item Item :107 Unit --- --- Sqm Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category No Item Code code107 Description Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. SR item(yes/no) No Quantity 157.44 Minimum Quantity --- Sqm Maximum Quantity --- Item Category --- No ro c BuyBack Item Unit Item :108 Item Code code108 Description Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding SR item(yes/no) No Quantity 37.8 --- ep Minimum Quantity BuyBack Item Unit Kg Maximum Quantity --- Item Category --- No Item :109 Item Code code109 Description Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding SR item(yes/no) No Unit Kg 42 of 135 975.24 Minimum Quantity BuyBack Item --- Maximum Quantity --- No Item :110 en t Quantity Item Code code110 Description Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding SR item(yes/no) No Quantity 873.18 BuyBack Item Item :111 Unit --- --- Kg Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category No code111 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) SR item(yes/no) No Quantity 0.5 ro c Item Code Minimum Quantity BuyBack Item --- Unit Cum Maximum Quantity --- Item Category --- No Item :112 code112 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid ep Item Code 43 of 135 separately) No Quantity 24.25 Minimum Quantity BuyBack Item Unit --- Cum Maximum Quantity --- Item Category --- en t SR item(yes/no) No Item :113 code113 Description Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) SR item(yes/no) No Quantity 5.16 Minimum Quantity BuyBack Item Item :114 ur em Item Code Unit --- Cum Maximum Quantity --- Item Category --- No code114 Description Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ep ro c Item Code SR item(yes/no) No Quantity 200 Minimum Quantity BuyBack Item Unit --- Maximum Quantity Kg --- No Item :115 44 of 135 code115 Description Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. SR item(yes/no) No Quantity 560 BuyBack Item Item :116 Unit --- Kg ur em Minimum Quantity Item Category en t Item Code --- Maximum Quantity --- Item Category --- No code116 Description Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. ro c Item Code SR item(yes/no) No Quantity 200 Minimum Quantity BuyBack Item --- Unit Kg Maximum Quantity --- Item Category --- No Item :117 code117 Description Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile ep Item Code 45 of 135 SR item(yes/no) No Quantity 27.45 Minimum Quantity BuyBack Item Unit --- en t over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. Sqm Maximum Quantity --- Item Category --- No Item :118 code118 Description Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. SR item(yes/no) No Quantity 10.2 Unit --- ro c Minimum Quantity ur em Item Code BuyBack Item Sqm Maximum Quantity --- Item Category --- No Item :119 code119 Description Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. ep Item Code SR item(yes/no) No Quantity 444.8 Minimum Quantity BuyBack Item Unit --- Maximum Quantity Sqm --- No Item :120 46 of 135 code120 Description Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per direction of Engineer incharge. SR item(yes/no) No Quantity 73.5 Minimum Quantity Item :121 Unit --- --- Sqm Maximum Quantity No --- ur em BuyBack Item Item Category en t Item Code Item Code code121 Description Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. SR item(yes/no) No Quantity 4.12 Minimum Quantity BuyBack Item Item :122 Item Category Unit --- --- Cum Maximum Quantity --- Item Category --- No code122 Description Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, curing complete as per specifications. SR item(yes/no) No Quantity 1.53 ro c Item Code Minimum Quantity BuyBack Item --- Unit Cum Maximum Quantity --- Item Category --- No ep Item :123 Item Code code123 Description Providing and supplying crystalline integral concrete waterproofing admixture that waterproofs concrete by forming crystals deep in the pores, capillaries and microcracks of the concrete, self-seal waterproofing compound to bridge shrinkage cracks upto 0.5mm in width & resist hydro-static pressure upto 16bar for both positive & negative pressure confirming to DIN 1048 part 5 for 56% reduction in depth of penetration against control, resistance to chloride penetration 47 of 135 SR item(yes/no) No Quantity 288 Minimum Quantity BuyBack Item Unit --- en t confirming to ASTM C 1202 with 64% improvement against control & protecting steel re-inforcement against corrosion mixed @ 1% by weight of cementitious content in concrete. ie., integral crystaline waterproofing admix @ 0.5 kg/bag of cement. (For calculation purpose 320 kg of Cement for M-20 grade of Concrete is considered in the analysis) Sqm Maximum Quantity --- Item Category --- No Item :124 code124 Description INTERNAL WATER SUPPLY & SANITORY WORK Earth work excavation for Foundation by manual means for all Buildings, Bridges, Retaining walls, Abutment Piers and such similar works as per drawing and technical Specifications, including setting out, providing shoring & strutting,barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m SR item(yes/no) No Quantity 15 Minimum Quantity Unit --- Cum Maximum Quantity --- Item Category --- No ro c BuyBack Item ur em Item Code Item :125 Item Code code125 Description Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. SR item(yes/no) No Quantity 15 ep Minimum Quantity BuyBack Item --- Unit Cum Maximum Quantity --- Item Category --- No Item :126 Item Code code126 Description Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801: 2008 OR WRAS, NSF certificates which is UV stabilized and anti-microbial fusion welded, having thermal stability 48 of 135 SR item(yes/no) No Quantity 130 Minimum Quantity BuyBack Item Unit --- en t for hot and cold water supply, including all PP-R plain and brass threaded polypropylene random fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes Lot wise test report as per the relevant IS/ ISO/DIN/BIS codes and also testing of joints complete as per direction of Engineer-In- Charge.etc. complete PN - 16 Pipe, SDR 7.4 -16 mm OD m Maximum Quantity --- Item Category --- No Item :127 code127 Description Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801: 2008 OR WRAS, NSF certificates which is UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply, including all PP-R plain and brass threaded polypropylene random fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes Lot wise test report as per the relevant IS/ ISO/DIN/BIS codes and also testing of joints complete as per direction of Engineer-In- Charge.etc. complete PN - 16 Pipe, SDR 7.4 -20 mm OD SR item(yes/no) No Quantity 120 Minimum Quantity BuyBack Item Item :128 ur em Item Code Unit --- m Maximum Quantity --- Item Category --- No code128 Description Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801: 2008 OR WRAS, NSF certificates which is UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply, including all PP-R plain and brass threaded polypropylene random fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes Lot wise test report as per the relevant IS/ ISO/DIN/BIS codes and also testing of joints complete as per direction of Engineer-In- Charge.etc. complete PN - 16 Pipe, SDR 7.4-25 mm OD SR item(yes/no) No Quantity 102 ro c Item Code ep Minimum Quantity BuyBack Item --- Unit m Maximum Quantity --- Item Category --- No Item :129 Item Code code129 Description Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801: 2008 OR WRAS, NSF certificates which is UV stabilized and anti-microbial fusion welded, having thermal stability 49 of 135 SR item(yes/no) No Quantity 140 Minimum Quantity BuyBack Item Unit --- en t for hot and cold water supply, including all PP-R plain and brass threaded polypropylene random fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes Lot wise test report as per the relevant IS/ ISO/DIN/BIS codes and also testing of joints complete as per direction of Engineer-In- Charge.etc. complete PN - 16 Pipe,SDR 7.4- 32 mm OD m Maximum Quantity --- Item Category --- No Item :130 code130 Description Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: SR item(yes/no) No Quantity 9 Minimum Quantity BuyBack Item Item :131 ur em Item Code Unit --- Each Maximum Quantity --- Item Category --- No code131 Description Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ro c Item Code SR item(yes/no) No Quantity 10 Minimum Quantity BuyBack Item --- Unit Unit Maximum Quantity --- Item Category --- No ep Item :132 Item Code code132 Description Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 50 of 135 No Quantity 2 Minimum Quantity BuyBack Item Unit --- Each Maximum Quantity No Item :133 --- en t SR item(yes/no) Item Code code133 Description Providing and fixing brass bib cock of approved quality : 15 mm nominal bore SR item(yes/no) No Quantity 21 BuyBack Item Unit --- --- Nos Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category No Item :134 Item Code code134 Description Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer SR item(yes/no) No Quantity 8 Minimum Quantity BuyBack Item Unit --- Each Maximum Quantity --- Item Category --- No ro c Item :135 Item Code code135 Description Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore SR item(yes/no) No Quantity 4 Minimum Quantity Each Maximum Quantity --- Item Category --- No ep BuyBack Item --- Unit Item :136 Item Code code136 Description Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore SR item(yes/no) No Quantity 3 Minimum Quantity Unit --- Maximum Each --51 of 135 Quantity BuyBack Item No Item :137 code137 Description Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore SR item(yes/no) No Quantity 4 Minimum Quantity BuyBack Item Item Category Unit --- --- en t Item Code Each Maximum Quantity No ur em Item :138 --- Item Code code138 Item Category Description Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay SR item(yes/no) No Quantity 8 ro c Unit Minimum Quantity BuyBack Item --- --- Nos Maximum Quantity --- Item Category --- No Item :139 code139 Description Providing and fixing square mouth SW gully trap class sp 1 complete with ci gratings brick masonery chamber 100 x 100 mm size p type with non modular common burnt brick of designation 3.5 & water tight ci cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 4.5kg and frame to be not less than 2.7 kg as per standard design ep Item Code SR item(yes/no) No Quantity 12 Minimum Quantity BuyBack Item Unit --- Maximum Quantity Each --- No 52 of 135 Item :140 code140 Description Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 250 mm SR item(yes/no) No Quantity 2 Minimum Quantity BuyBack Item Item Category Unit --- --- en t Item Code Each Maximum Quantity --- Item Category --- No Item :141 code141 Description Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth. SR item(yes/no) No Quantity 2.1 ur em Item Code Minimum Quantity BuyBack Item Unit --- Sqm Maximum Quantity --- Item Category --- No Item :142 code142 Description Providing and fixing trap of self cleaning design with screwed down or hinged grating with or without vent arm complete , including cost of cutting and making good for walls and floors 100mm inlet and 100mm out let SR item(yes/no) No Quantity 21 ro c Item Code Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No ep Item :143 Item Code code143 Description Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 g. SR item(yes/no) No Quantity 8 Minimum Quantity Unit --- Maximum Each --53 of 135 Quantity BuyBack Item No Item :144 code144 Description Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. SR item(yes/no) No Quantity 4 Minimum Quantity BuyBack Item Item Category Unit --- --- en t Item Code Each Maximum Quantity No ur em Item :145 --- Item Code code145 Description Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply, including all PP-R plain and brass threaded polypropylene random fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-In- Charge. PN - 16 Pipe,SDR 7.4-40 mm OD SR item(yes/no) No Quantity 120 Minimum Quantity BuyBack Item Item :146 Item Category Unit --- --- m Maximum Quantity --- Item Category --- No code146 Description Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply, including all PP-R plain and brass threaded polypropylene random fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-In- Charge. PN - 16 Pipe,SDR 7.4- 32 mm OD SR item(yes/no) No Quantity 110 ep ro c Item Code Minimum Quantity BuyBack Item --- Unit m Maximum Quantity --- Item Category --- No Item :147 Item Code code147 Description Providing and fixing 3 layer PP-R (Poly Propylene Random Copolymer) pipes confirming to IS.15801, UV stabilized and anti-microbial fusion 54 of 135 SR item(yes/no) No Quantity 140 Minimum Quantity BuyBack Item Unit --- en t welded, having thermal stability for hot and cold water supply, including all PP-R plain and brass threaded polypropylene random fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-In- Charge. PN - 16 Pipe,SDR 7.4-63 mm OD m Maximum Quantity --- Item Category --- No Item :148 code148 Description Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 140mm dia., 6 kg/sqcm & class 3 SR item(yes/no) No Quantity 130 Minimum Quantity Unit --- m Maximum Quantity --- Item Category --- No ro c BuyBack Item ur em Item Code Item :149 code149 Description Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 ep Item Code SR item(yes/no) No Quantity 180 Minimum Quantity Unit --- Maximum m --55 of 135 Quantity BuyBack Item No Item :150 code150 Description Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 75mm dia., 6 kg/sqcm & class 3 SR item(yes/no) No Quantity 120 BuyBack Item Item :151 --- ur em Minimum Quantity Item Category en t Item Code Unit --- m Maximum Quantity --- Item Category --- No code151 Description Providing and placing on terrace polyethylene water storage tanks as per IS : 12701 : 1996 with manhole lid and suitable locking arrangements, aking holes of suitable diameter for inlet, outlet and overflow pipes, includng cost of all materilas, labour, transporation charges HOM of Equipmnts and testing complete as per specificatiosns SR item(yes/no) No Quantity 6000 ro c Item Code Minimum Quantity BuyBack Item --- Unit Ltr Maximum Quantity --- Item Category --- No Item :152 code152 Description EXTERNAL WATER SUPPLY & SANITORY WORK Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements ep Item Code 56 of 135 for procuring water for testing) etc. for: PVC pipes 50mm dia., 6 kg/ sqcm & class 5 No Quantity 110 Minimum Quantity BuyBack Item Unit --- m en t SR item(yes/no) Maximum Quantity --- Item Category --- No Item :153 code153 Description Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for: PVC pipes 110mm dia., 6 kg/sqcm & class 3 FOR RAIN WATER PIPE SR item(yes/no) No Quantity 110 ur em Item Code Minimum Quantity BuyBack Item --- m Maximum Quantity --- Item Category --- No Item :154 code154 ro c Item Code Unit Description Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore SR item(yes/no) No Quantity 4 Minimum Quantity BuyBack Item --- Unit No Maximum Quantity --- Item Category --- No Item :155 code155 Description Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 65 mm nominal bore SR item(yes/no) No Quantity 6 ep Item Code Minimum Quantity Unit --- Maximum Quantity No --- 57 of 135 BuyBack Item No Item :156 code156 Description Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay SR item(yes/no) No Quantity 4 BuyBack Item Item :157 --- ur em Minimum Quantity Item Category en t Item Code Unit --- Nos Maximum Quantity --- Item Category --- No code157 Description Earth work excavation for Foundation by manual means for all Buildings, Bridges, Retaining walls, Abutment Piers and such similar works as per drawing and technical Specifications, including setting out, providing shoring & strutting,barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. Depth exceeding 1.5m, but not exceeding 3 m ro c Item Code SR item(yes/no) No Quantity 12 Minimum Quantity Cum Maximum Quantity --- Item Category --- No ep BuyBack Item --- Unit Item :158 Item Code code158 Description Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. SR item(yes/no) No Unit Cum 58 of 135 12 Minimum Quantity BuyBack Item --- Maximum Quantity --- No Item :159 en t Quantity Item Code code159 Description Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-20003Phase, SS Bowl & Impeller with Low volt Motor as per specifications,as per necessary ammendments and instructions of engineer incharge of work. For 3 HP 3.00 HP - 300 LPM at 26 m 5 STG Outlet Dia 2.50 SR item(yes/no) No Quantity 2 BuyBack Item Unit --- Each ur em Minimum Quantity Item Category --- Maximum Quantity --- Item Category --- No Item :160 code160 Description borewell 1 numbers Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner or Schlumbergers’s method, including reconnaissance survey of geological formation. Geophysical investigation of existing ground water in the vicinity, its quality, quantity and acceptability of the users, indicating the location of the site, recommended depth of casing pipe required to seal the top unconsolidated formation including an extra depth of 1.0 metre in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instruments and accessories to work site, engaging technical personal and labour required etc. NOTE: 1) Additional rate on item 1&2 is allowed for drilling in over burden and fixing Casing pipes beyond 20 M (for fixing Casing pipes only) a) Above 20 M and upto 30 M - 15%, b) Above 30 M - 30% (Measurement of overburden is restricted to the depth of casing pipe fixed excluding initial depth of 20M and projection above ground level). 2) A sum of Rs. 100/- is to be deducted for Dry Borewell towards yield test. ro c Item Code No Quantity 1 ep SR item(yes/no) Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :161 Item Code code161 Description Sinking of borewell of 165 mm dia clear using fast rig in all strata 59 of 135 SR item(yes/no) No Quantity 50 Minimum Quantity BuyBack Item Unit --- en t including over burden upto 30 M fixing of casing pipes, collars and cap with necessary cutting & threading including transportation of rig and supporting vehicle crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes) for piped water supply schemes Upto 50 Mtrs m Maximum Quantity --- Item Category --- No Item :162 code162 Description Sinking of borewell of 165 mm dia clear using fast rig in all strata including over burden upto 30 M fixing of casing pipes, collars and cap with necessary cutting & threading including transportation of rig and supporting vehicle crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes) for piped water supply schemes Above 50 Mtrs and upto 100 Mtr. SR item(yes/no) No Quantity 50 Minimum Quantity BuyBack Item Item :163 ur em Item Code Unit --- m Maximum Quantity --- Item Category --- No code163 Description Sinking of borewell of 165 mm dia clear using fast rig in all strata including over burden upto 30 M fixing of casing pipes, collars and cap with necessary cutting & threading including transportation of rig and supporting vehicle crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes) for piped water supply schemes Above100 Mtrs. and upto 150 Mtr. SR item(yes/no) No Quantity 50 ro c Item Code --- ep Minimum Quantity BuyBack Item Unit m Maximum Quantity --- Item Category --- No Item :164 Item Code code164 Description Sinking of borewell of 165 mm dia clear using fast rig in all strata including over burden upto 30 M fixing of casing pipes, collars and cap with necessary cutting & threading including transportation of rig and supporting vehicle crew charges and cost of consumables, etc., 60 of 135 complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes) for piped water supply schemes Above150 Mtrs. and upto 200 Mtr. No Quantity 50 Minimum Quantity BuyBack Item Unit --- m en t SR item(yes/no) Maximum Quantity --- Item Category --- No Item :165 code165 Description Sinking of borewell of 165 mm dia clear using fast rig in all strata including over burden upto 30 M fixing of casing pipes, collars and cap with necessary cutting & threading including transportation of rig and supporting vehicle crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes) for piped water supply schemes Above200 Mtrs. and upto 250 Mtr. SR item(yes/no) No Quantity 50 Minimum Quantity BuyBack Item Item :166 ur em Item Code Unit --- m Maximum Quantity --- Item Category --- No code166 Description Sinking of borewell of 165 mm dia clear using fast rig in all strata including over burden upto 30 M fixing of casing pipes, collars and cap with necessary cutting & threading including transportation of rig and supporting vehicle crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (Excluding cost of casing pipes) for piped water supply schemes Above200 Mtrs. and upto 300Mtr. ro c Item Code SR item(yes/no) No Quantity 50 Minimum Quantity BuyBack Item --- Unit m Maximum Quantity --- Item Category --- No ep Item :167 Item Code code167 Description Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to IS 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends.threaded conforming to IS 554-1985 one end fixed with socket conforming to IS 4270-2001 and the other end with screwed pipes all 61 of 135 shall be responsibaly free from defects. The tubes shall be responsible straight end should be with ISI marking weighing 25.10kg/m.prices include Collar-Medium duty. No Quantity 35 Minimum Quantity BuyBack Item Unit --- m en t SR item(yes/no) Maximum Quantity --- Item Category --- No Item :168 code168 Description Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. Note: Upto 110mm dia Coil shall be used. For Grade PE80 PN6.0 : 63 mm dia SR item(yes/no) No Quantity 300 ur em Item Code Minimum Quantity BuyBack Item Unit --- m Maximum Quantity --- Item Category --- No ro c Item :169 code169 Description Supplying and deleviring at site submersible pumpset for 150 mm borewell and having the cleared duty conditions as detailed and satisfying the performance charecterstics for pump and motor as declared to the beureau of indian standards . The pumpset should bear the IS certificate mark ISI 8034 -1989 with amendment no.1 (with latest ammendment if any) etc., complete as per the direction of Engineer in charge 10.00 HP - 155 LPM @ 140 m = 10 STG Outlet Dia - 2.00” SR item(yes/no) No ep Item Code Quantity Nos 1 Minimum Quantity BuyBack Item Unit --- Maximum Quantity --- Item Category --- No Item :170 Item Code code170 Description Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with 62 of 135 all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments No Quantity 1 Minimum Quantity BuyBack Item Unit --- Nos en t SR item(yes/no) Maximum Quantity --- Item Category --- No Item :171 code171 Description Providing and laying at site of work MS casing caps as per IS 1239 (partII) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensions of caps and colars shall be strictly as per IS 1239 (Part-II) 1982 with all amendments including cost of material and labour charges for fixing, if any etc. complete with all lead and lifts and as directed by the Engineer in charge SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item ur em Item Code Unit --- Nos Maximum Quantity --- Item Category --- No Item :172 code172 Description Providing np cp 50mm dia Waste Unions conforming to ISI specifications and fixing them in position as per directions (Rates includes cost of materials fixtures and conveyance to work spot etc complete) SR item(yes/no) No Quantity 1 ro c Item Code Minimum Quantity BuyBack Item --- Unit Nos Maximum Quantity --- Item Category --- No Item :173 code173 Description Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirmining to table 3 class 5 of IS8130 1984 and virgin grade PVC insulation and sheathed suitable for working voltage upto 1100Volts as per IS 6941990 & confirming to GTP of GROUP A 122.10 ep Item Code SR item(yes/no) No Quantity 163.92 Minimum Quantity Unit --- Maximum Quantity Mtr --63 of 135 BuyBack Item No Item :174 code174 Description Fabricating supplying and mounting MS box made out ...SWG suitable for floor I wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete (49/6.40) 16SWG SR item(yes/no) No Quantity 30000 BuyBack Item Unit --- --- Sq CM Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category en t Item Code No Item :175 Item Code code175 Description Supply and Installation I Fixing I Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase I Three Phase Energy Meter in suitable base plate and having a provision for Fuse I MCB cutout with suitable transparent hinged flap opening for operating MCB along with 10 complete tamper proof SEALING facility. (50/6.42) 600mmx600mmx170mm. SR item(yes/no) No Quantity 1 --- ro c Minimum Quantity Unit BuyBack Item Each Maximum Quantity --- Item Category --- No Item :176 code176 Description Supplying and fixing polished wood board made of not less than 15mm thick plank on both sides with planks made out of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws etc. - 500 x 500 x 65 mm (20" x 20" x 2.5") etc., complete as per directions of the Engineer-in-charge ep Item Code SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Unit --- Maximum Quantity Each --- No Item :177 64 of 135 Item Code code177 Description Supplying and fixing miniature circuit breakers/Isolators on existing MCB distribution boards using necessary fixing materials and wiring complete as directed by the Engineer-in-charge - 5 to 30 Amps Triple and Neutral SR item(yes/no) No Quantity 1 BuyBack Item Unit --- --- Each en t Minimum Quantity Item Category Maximum Quantity --- Item Category --- No Item :178 code178 Description Supplying and fixing TPST with neutral link switches rewirable fuse type Havels / Standard / Indo-Asian Crescent - 30 to 35 Amps, etc., complete as per directions of the Engineer-in-charge SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item ur em Item Code Unit --- Each Maximum Quantity --- Item Category --- No Item :179 Item Code code179 Description Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery (48/6.35) SR item(yes/no) No Quantity 1 --- ro c Minimum Quantity Unit BuyBack Item Each Maximum Quantity --- Item Category --- No Item :180 code180 Description SUMP TANK Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work. In all kinds of soils Depth upto 3 m consider hard soil 70% of total excavation qty ep Item Code SR item(yes/no) No Quantity 22.3 Minimum Quantity Unit --- Maximum Cum --65 of 135 Quantity BuyBack Item No Item :181 code181 Description In ordinary/soft rock without blasting, Depth exceeding 1.5 m, but not exceeding 3 m consider 20% of total excavation qty SR item(yes/no) No Quantity 6.37 Minimum Quantity BuyBack Item Item Category Unit --- --- en t Item Code Cum Maximum Quantity No ur em Item :182 --- Item Code code182 Description Earth work excavation for FOUNDATION by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including cost of explosives, dressing of excavated surfaces, disposing off or levelling the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, blasting materials, tools, usage of Machinery & all other appurtenaces required to complete the work consider 10% of total excavation qty SR item(yes/no) No Quantity 3.19 Minimum Quantity BuyBack Item Unit --- --- Cum Maximum Quantity --- Item Category --- No ro c Item :183 Item Category Item Code code183 Description Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. SR item(yes/no) No Quantity 8.78 --- ep Minimum Quantity BuyBack Item Unit Cum Maximum Quantity --- Item Category --- No Item :184 Item Code code184 Description Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external 66 of 135 SR item(yes/no) No Quantity 12.25 Minimum Quantity BuyBack Item Unit --- en t perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20% E.C. / Lindane 20% E.C. @ 3.19 l/m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications. Sqm Maximum Quantity --- Item Category --- No Item :185 code185 Description Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm and down size graded crushed coarse aggregates SR item(yes/no) No Quantity 1.73 Minimum Quantity Unit --- Cum Maximum Quantity --- Item Category --- No ro c BuyBack Item ur em Item Code Item :186 code186 Description Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M25 Design Mix Using 20 mm and down size graded crushed coarse aggregates consider 8% of finished rate of concrete for foundation upto plitnth shuttering ep Item Code SR item(yes/no) No Quantity 13.92 Minimum Quantity Unit --- Maximum Cum --67 of 135 Quantity BuyBack Item No Item :187 code187 Description Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately) SR item(yes/no) No Quantity 2.68 BuyBack Item Item :188 Unit --- --- t Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category en t Item Code No Item Code code188 Description Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. SR item(yes/no) No Quantity 111.6 Minimum Quantity --- Sqm Maximum Quantity --- Item Category --- No ro c BuyBack Item Unit Item :189 code189 Description Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer @150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge. ep Item Code SR item(yes/no) No Quantity 77.58 Unit Sqm 68 of 135 Minimum Quantity BuyBack Item --- Maximum Quantity --- No en t Item :190 code190 Description ELEVATION WORKS Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/ beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete acp SR item(yes/no) No Quantity 60 Minimum Quantity BuyBack Item Item :191 Item Category --- ur em Item Code Unit --- Sqm Maximum Quantity --- Item Category --- No code191 Description ELEVATION WORKS Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/ beams with necessary aluminium frame works at required level made out of 50x25x4mm C section or equivalent. The panel should consist of 3mm thick non-halogenated FR grade mineral based polymer ( 2 hrs fire resistance as per ASTM E119-12 and clause B, S1, do as per ENT 13501-1sandwiched between 0.50 skins thick aluminium sheet making a total panel thickness of 4mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done with necessary rods etc., complete acp ep ro c Item Code SR item(yes/no) No Quantity 60 Minimum Quantity BuyBack Item Unit --- Maximum Quantity Sqm --- No Item :192 69 of 135 code192 Description Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification. granite cladding SR item(yes/no) No Quantity 67.5 BuyBack Item Item :193 Unit --- --- Sqm Maximum Quantity --- ur em Minimum Quantity Item Category en t Item Code No Item Code code193 Description Providing and fixing 20mm thick gang saw water cut Lakared granite for cladding in CM 1:3 (1 cement : 3 coarse sand) proportion with a coat of rough plastering using CM 1:4 (1 cement : 4 fine sand), cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, grooves in joints including cost of curing etc., complete including cost and conveyance of all materials, mortar, labour for all items of work, usage charges of machinery etc., complete as per specification. granite cladding SR item(yes/no) No Quantity 67.5 Unit --- ro c Minimum Quantity Item Category BuyBack Item --- Sqm Maximum Quantity --- Item Category --- No Item :194 code194 Description Providing and fixing of Laterite cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive over rough plaster surface excluding cost of rough plastered surface. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification. granite cladding ep Item Code SR item(yes/no) No Quantity 60 Minimum Quantity BuyBack Item Unit --- Maximum Quantity Sqm --- No 70 of 135 Item :195 code195 Description Providing and fixing of Laterite cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive over rough plaster surface excluding cost of rough plastered surface. The work includes cost of all materials, labour charges for all items of work, usage charges for equipment, etc., complete as per specification. granite cladding SR item(yes/no) No Quantity 60 Minimum Quantity Item :196 Unit --- --- Sqm Maximum Quantity No --- ur em BuyBack Item Item Category en t Item Code Item Code code196 Description NON SR ITEMS : Providing and fixing Alluminium fixtures like 1 no of Aldrops of size 300 x 16 mm, 2 no's of Tower bolts of size 200 x 12 mm, 100 mm length ss Hinges, 2nos of Handles of size 200 mm, 1 no of Door Stopper & 1 no of Door Bush of approved make and quality including cost and conveyance of all materials and as per the direction of EIC of work with all lead and lift and as directed by the Engineer in charge of works. SR item(yes/no) No Quantity 25 Minimum Quantity BuyBack Item Unit --- --- Nos Maximum Quantity --- Item Category --- No ro c Item :197 Item Category code197 Description Forming horizontal or vertical grooves on uniform size 10 mm wide and 7 mm deep at junction of wall and column / beam and finishing the grooves to elevation etc, including cost of materials , labour floor fixing, HOM of equipments and machineries all leads and lift loading and unloading, transportation , all other incidental charges at all floor levels etc, complete all as per specifications and as directed by the Engineer in charge. SR item(yes/no) No Quantity 1820 ep Item Code Minimum Quantity BuyBack Item --- Unit m Maximum Quantity --- Item Category --- No Item :198 Item Code code198 71 of 135 Description Supplying, fixing, testing and commissioning of 15mm dia CP Long body Bib Cock (wall mounted model) for wash area with CP wall flange etc. SR item(yes/no) No Quantity 12 BuyBack Item --- Nos en t Minimum Quantity Unit Maximum Quantity --- Item Category --- No Item :199 Item Code code199 Description Supplying and fixing of Robe hook Fixed on the toilet Door as directed by the Engineer in charge. SR item(yes/no) No Quantity 20 BuyBack Item Item :200 Nos ur em Minimum Quantity Unit --- Maximum Quantity --- Item Category --- No code200 Description Providing, fixing, testing and commissioning of PVC gullytrap of 150 x 150 mm size with 100 mm dia outlet making excavation pit in all kinds of soil and laying of 100 mm thick 1:4:8 mix cement concrete bed and constructing chamber with internal clear dimension of 300 x 300 mm using table moulded wire cut bricks in brick work 115 mm thick in cement mortar 1:4 up to a height of 300 mm above gully trap or up to 100 mm above paving level, plastering internal and external surface with cement mortar 1:4 to 15m thick finishing to smooth inside surface with necessary benching and channelling providing 150 x 150 mm size cast iron grating, including 40 mm thick precast RCC cover slab, clearing the surplus material, earth etc. complete as per drawing. 150mm x 150mm size 'P/S' trap ro c Item Code SR item(yes/no) No Quantity 12 Minimum Quantity BuyBack Item --- Unit Nos Maximum Quantity --- Item Category --- No Item :201 code201 Description Providing & fixing of CP waste coupling 32mm Size full thread for Truf SR item(yes/no) No Quantity 14 ep Item Code Minimum Quantity BuyBack Item Unit --- Maximum Quantity Each --- No 72 of 135 Item :202 code202 Description Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste including making good the floors etc., complete as directed by the Engineer in charge. SR item(yes/no) No Quantity 12 Minimum Quantity BuyBack Item Item Category Unit --- --- en t Item Code Each Maximum Quantity No ur em Item :203 --- Item Code code203 Description Supplying , installing, testing and commissioning of brass body nickel plated automatic air release valves with brass splindle, NBR and joinfraniteelastomer,staniless steel spring polypropylenic float at the top most points of watersupply distribution ringmain. SR item(yes/no) No Quantity 25 Minimum Quantity BuyBack Item Item Category Unit --- --- Each Maximum Quantity --- Item Category --- No Item :204 code204 Description Construction of percolation well / rain water harvest pit of 2 m dia and 3m deep with precast RCC rings, covering the top with RCC slab including supply and fixing 600 x 600 RCC MH cover CI / MS rungs etc. The quoted rate shall include earth work excavation, back filling, removing excess earth and making good the floor. The percolation well harvest pit shall be constructed as per the detail drawings and specification shall consists of: Alternate layers of brick bats, activated charcoal, gravel, pebbles and toped with fine sand for good infiltration. 3 Nos. bore holes of 160 mm dia from the bottom of percolation pit for a depth of 6m, drilled by using auger manually. Bore hole to be filled with medium sized pebbles to provide mechanical strength to the holes and enhance infiltration.Rate quoted shall be inclusive of earth work excavation, back filling, removing of excess earth as per the instructions of engineer - in charge. ep ro c Item Code SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Unit --- Maximum Quantity Each --- No Item :205 73 of 135 code205 Item Category --- Description FURNITURE MEETING HALL TABLEDimension: (7200mm x 800mm x 750mm) + (7200mm x 800m x 750mm) (U-Shaped)Providing and FabricFURNITURE WORKS ating U-Shaped Board room Table with 19mm ply Finished with 4mm thk Approved Veneer Melamine finished. Table top: 40mm thick table top to be formed out 2 layers of 19mm tk ply and to be finished with 4mm thk approved Veneer and melamine polished. The edge of the table to be provided with approved timber beading to form 50mm thick fascia formed to shape finished with approved Melamine polish to match the veneer. The top to house cable trough / cable pop up box for cable management with 19mm thk ply openable as per details, complete as per detail dwg.Base: The base of the table shall consist of 19mm commercial ply finished with 4mm thk veneer of approved make & shade. Cost to include providing & fixing 6x6mm thk Aluminium beading, complete as per the drawing and instructions of the Engineer-in-charge. SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Item :206 ur em en t Item Code Unit --- Nos Maximum Quantity --- Item Category --- No code206 Description STORAGE: Providing and fixing storage unit of 0.45m depth made out of 19mm thick commercial ply vertical support finished in approved 1.5mm laminate with 12mm thick ply backing internally finished with enamel paint of approved colour and shade shelves shall be formed out of 19mm ply finished with enamel paint of approved shade and colour and 19mm thick shutters formed out of 19mm thick ply finished with 1.5mm thick laminate of approved shade and colour etc., complete the rate includes cost of all materials, labour charges, complete as per specifications & instructions of the Engineer-in-charge.Mode of measurement : Length & height of the storage shall be measured for payment. ro c Item Code SR item(yes/no) No Quantity 12 Minimum Quantity Nos Maximum Quantity --- Item Category --- No ep BuyBack Item --- Unit Item :207 Item Code code207 Description RECEPTION TABLE:Table Dimension: (3000 x 600 x 750mm) + Transaction counter (1500mm x 250mm x 1050mm): Providing and Fabricating Reception Table with storage, formed with 19mm ply Finished with 4mm thk Approved Veneer Melamine finished. Table top: 40mm thick table top to be formed out 2 layers of 19mm tk ply and to be finished with 4mm thk approved Veneer and melamine 74 of 135 No Quantity 1 Minimum Quantity BuyBack Item Unit Nos ur em SR item(yes/no) en t polished. The edge of the table to be provided with approved timber beading to form 50mm thick fascia formed to shape Finished with approved Melamine polish to match the veneer. The top to house cable trough / cable pop up box for cable management with 19mm thk ply openable as per details, complete as per detail dwg. Base: The base of the table shall consist of 19mm commercial ply boxing finished with 4mm thk veneer of approved make & shade. Cost to include providing & fixing 6x6mm thk Aluminium beading, complete as per the drawing & instructions of the Engineer-in-charge. Storage: Storage partitions to be formed out of 19mm thick ply to required shape & size finished with 1.5mm thick laminate on internal surfaces. Store drawers to be provided with approved size of handles, locking arrangements etc., complete as per details drawings & instructions of the Engineer-in-charge. --- Maximum Quantity --- Item Category --- No Item :208 code208 Description CONFERENCE ROOM - PANEL TABLE Table Dimension: 5600mm x 750mm x 750mmProviding and Fabricating Conference Table with 19mm ply Finished with 4mm thk Approved Veneer Melamine finished. Table top: 40mm thick table top to be formed out 2 layers of 19mm tk ply and to be finished with 4mm thk approved Veneer and melamine polished. The edge of the table to be provided with approved timber beading to form 50mm thick fascia formed to shape finished with approved Melamine polish to match the veneer. The top to house cable trough / cable pop up box for cable management with 19mm thk ply openable as per details, complete as per detail dwg.Base: The base of the table shall consist of 19mm commercial ply finished with 4mm thk veneer of approved make & shade over sal wood-50x50mm frame work. Cost to include providing & fixing 6x6mm thk Aluminium beading, complete as per the drawing and instructions of the Engineer-in-charge. ro c Item Code SR item(yes/no) No Quantity 1 Minimum Quantity Nos Maximum Quantity --- Item Category --- No ep BuyBack Item --- Unit Item :209 Item Code code209 Description CABIN TABLES - TYPE-1:Table Dimension: (3500 x 900 x 750mm) + (1350mm x 800mm x 750mm) L shaped : Providing and Fabricating Cabin Table with 19mm ply Finished with 4mm thk Approved Veneer Melamine finished. Table top: 40mm thick table top to be formed out 2 layers of 19mm tk ply and to be finished with 4mm thk approved Veneer 75 of 135 SR item(yes/no) No Quantity 1 Minimum Quantity Item :210 --- Nos Maximum Quantity No --- ur em BuyBack Item Unit en t and melamine polished. The edge of the table to be provided with approved timber beading to form 50mm thick fascia formed to shape Finished with approved Melamine polish to match the veneer. The top to house cable trough / cable pop up box for cable management with 19mm thk ply openable as per details, complete as per detail dwg.Base: The base of the table shall consist of 19mm commercial ply boxing finished with 4mm thk veneer of approved make & shade. Cost to include providing & fixing 6x6mm thk Aluminium beading, complete as per the drawing & instructions of the Engineer-in-charge. Item Code code210 Item Category Description CABIN TABLES - TYPE-2:Table Dimension: 1800mm x 750mm x 750mm: Providing and Fabricating Cabin Table with 19mm ply Finished with 4mmthk Approved Veneer Melamine finished. Table top: 19mm thick table top to be formed out of 19mm tk ply and to be finished with 4mm thk approved Veneer and melamine polished. The edge of the table to be provided with approved timber beading to form 30mm thick fascia formed to shape Finished with approved Melamine polish to match the veneer. The top to house cable trough / cable pop up box for cable management with 19mm thk ply openable as per details, complete as per detail dwg. Base: The base of the table shall consist of 19mm commercial ply finished with 4mm thk veneer of approved make & shade. complete as per the drawing & instructions of the Engineer-incharge. SR item(yes/no) No ro c Unit Quantity Nos 10 Minimum Quantity BuyBack Item --- --- Maximum Quantity --- Item Category --- No Item :211 code211 Description BACK STORAGE (Length between 1100 to 1800mm) x 600mm depth x 750mm height: Back Storage: Providing & fabricating storage formed out of 19mm thick ply & finished with 4mm thk approved Veneer and melamine polished. The storage shall consists of shutters & shelves in 19mm thk ply & finished with 1.5mm thk approved laminate on both sides. The shutters shall be mounted over spring loaded auto closing hinges of approved make, tower bolt. The exposed edges of the storage shall be lipped using approved edge binding, complete as per detail dwg. & instructions of the Engineer-in-charge.Mode of Measurement : Length & Height of the storage shall be measure for payment. ep Item Code SR item(yes/no) No Unit Nos 76 of 135 12 Minimum Quantity BuyBack Item --- Maximum Quantity --- No en t Quantity Item :212 code212 Description BACK STORAGE - (Length between 5770 to 7270mm) x 600mm depth x 750mm heightBack Storage: Providing & fabricating storage formed out of 19mm thick ply & finished with 4mm thk approved Veneer and melamine polished. The storage shall consists of shutters & shelves in 19mm thk ply & finished with 1.5mm thk approved laminate on both sides. The shutters shall be mounted over spring loaded auto closing hinges of approved make, tower bolt. The exposed edges of the storage shall be lipped using approved edge binding, complete as per detail dwg. & instructions of the Engineer-in-charge.Mode of Measurement : Length & Height of the storage shall be measure for payment. SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Item :213 Item Category --- ur em Item Code Unit --- Nos Maximum Quantity --- Item Category --- No code213 Description HIGH BACK CHAIR - Leatherette with head rest with castors: Supplying & placing in position High back chair with following specification. Seat: Seat to be formed out of bent ply / PVC backing with deformable pre moulded foam upholstered with approved fabric. Back rest: The high back rest in leatherette over frame. The back rest to have provision of height adjustable backrest for an optimum adjustment of the lumbar support, to be either by turning knob or push- button. upholstered with Leatherette. High back chair to have head rest. Mechanism: Synchronised knee-tilt with 2 way locking mechanism. Gas lift: synchronised gas lift. Arm rest: Adjustable arm rest to be formed out of PU foam / PVC with fixed arm. Base: Base shall consist of 5 prong formed of die cast aluminium with chrome plated finish with soft-dual wheel castors. Castors: Twin wheel high resistant polyamide castors. ro c Item Code SR item(yes/no) No Quantity 14 ep Minimum Quantity BuyBack Item --- Unit Nos Maximum Quantity --- Item Category --- No Item :214 Item Code code214 Description MEDIUM BACK CHAIR- FABRIC without castors: Supplying & placing in position medium back chair with following specification. Seat: Seat to be formed out of bent ply / PVC backing with 77 of 135 SR item(yes/no) No Quantity 70 Minimum Quantity --- Maximum Quantity No Item :215 Nos --- ur em BuyBack Item Unit en t deformable pre moulded foam upholstered with approved fabric. Back rest: The medium back rest in fabric over frame. The back rest to have provision of height adjustable backrest for an optimum adjustment of the lumbar support, to be either by turning knob or push- button. upholstered with Mesh fabric. Mechanism: Synchronised knee-tilt with 2 way locking mechanism. Gas lift: synchronised gas lift. Arm rest: Fixed arm rest to be formed out of PU foam / PVC with provision of height swinging adjustment, Width adjustment, height adjustments. Base: Base shall consist of 5 prong formed of Nylon legs. Item Code code215 Description DOUBLE SEATER SOFA: Providing & fabricating DOUBLE SEATER SOFA in silver wood frame work with 150mm thick foam backing for seat & back rest clad with two layers of 12mm thick foam of approved make clad with 2mm thick foam finished in approved leatherette. The sofa to be provided with 50mm ht. SS legs complete as per detail dwg & instructions of the Engineer-in-charge. SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Item Category Unit --- --- Nos Maximum Quantity --- Item Category --- No Item :216 code216 Description THREE SEATER SOFA: Providing & fabricating THREE SEATER SOFA in silver wood frame work with 150mm thick foam backing for seat & back rest clad with two layers of 12mm thick foam of approved make clad with 2mm thick foam finished in approved leatherette. The sofa to be provided with 50mm ht. SS legs complete as per detail dwg & instructions of the Engineer-in-charge. SR item(yes/no) No Quantity 9 ro c Item Code ep Minimum Quantity BuyBack Item --- Unit Nos Maximum Quantity --- Item Category --- No Item :217 Item Code code217 Description SIDE TABLE: Providing & fabricating centre table of size 500mm X 500mm formed out of 19mm thick commercial ply finished in 4mm thick approved veneer with edge lipping finished in melamine polished. 78 of 135 The base shall be formed out of 16mm dia. Brushed finish SS pipe, complete as per detail dwg & instructions of the Engineer-in-charge. No Quantity 5 Minimum Quantity BuyBack Item Unit --- Nos en t SR item(yes/no) Maximum Quantity --- Item Category --- No Item :218 code218 Description Perforated Acoustic Woodworks Wall Panel (AP 01) : Providing & Fixing of Woodworks Wall Panel System having Square edge Panels with Z-Clip mounting system. The Panels to be made of a Moisture resistant fibre board with minimum 595 Kg/M3 density substrate. The panels shall have size of 600mm W x 600mm L, having Round R3 perforations having hole diameter as 3mm with laminate shade as approved by the Architect or EngineerinCharge, with 0.7mm matching PVC edge banding. Back side of the tile will have Soundtex fleece hot pressed to achieve NRC of 0.55, Humidity Resistance (RH) of 70%.The panels having Z-Clips (made of Aluminum extruded sections) fixed at the back, shall be mounted on Z-Strips (made of Aluminum extruded sections) in accordance to the shop drawings. INSTALLATION: The Z-Strips shall be secured to the walls using appropriate fasteners as per the locations and dimensions indicated in the shop drawings. All panels intended for Z-clips shall be with nokerfs in any of the edges. The Panels shall be mounted on the Z-strips such that Z-clips shall have positive engagement with the Z-strips. A 5mm reveal (5mm foam gasket) to be maintained between every two panels. (Non SR) (Auditorium Main Hall) ro c ur em Item Code SR item(yes/no) No Quantity 126 --- ep Minimum Quantity BuyBack Item Unit Sqm Maximum Quantity --- Item Category --- No Item :219 Item Code code219 Description CAMERAS & ACCESSORIES: Supply, erection, testing & commissioning 2 Megapixel high-performance CMOS, Analog HD output, up to 1080P resolution, True Day/Night, True WDR, up to 120dB,EXIR technology, up to 79 of 135 20m IR distance , IP66 weatherproof ,Max. 5W, with 4*4 Model Box for Camera and other accessories. No Quantity 6 Minimum Quantity BuyBack Item Unit --- Nos en t SR item(yes/no) Maximum Quantity --- Item Category --- No Item :220 Item Code code220 Description Supply, erection, testing & commissioning of 12/24V, 4 out put Camera Power Supply (SMPS, switched-mode power supply) Each Camera have Separate Terminal, including all Accessories. SR item(yes/no) No Quantity 6 BuyBack Item Nos ur em Minimum Quantity Unit --- Maximum Quantity --- Item Category --- No Item :221 code221 Description Supply, erection, testing & commissioning of High resolution 16 channel Supply, erection, testing & commissioning of High resolution 16 channel with following configuration. High performance Triple Platform HD TVI DVR, with H.264 Compression (High Profile) Max 1080p HD resolution supported HD TVI, Analog and IP cameras supported; Supports ONVIF Under NVR Mode HDD 1 HDDs upto 4TB supported Audio Input output 1 In 1 Out Video Outputs 1 x HDMI, 1 x VGA Network Port 1 x Gigabit (10 100 1000) adaptive network port Multi Input modes Analog (16 x 720p HD TV 16 x 960H) Network (2 x 720P/ 960P/ 1080P), 2 TB Sata Surveillance HDD storage capacity. ro c Item Code SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item --- Unit Nos Maximum Quantity --- Item Category --- No ep Item :222 Item Code code222 Description Supply, Installation, Testing & Commissioning of 24inch LED Monitor with all accessories. SR item(yes/no) No Quantity 1 Minimum Quantity Unit --- Maximum Quantity Nos --80 of 135 BuyBack Item No Item :223 code223 Description Supply and laying of 3+1 Camera Cable with power and co axial (Pure Copper) in Existing 25mm Dia PVC conduits with all necessary accessories. SR item(yes/no) No Quantity 210 Minimum Quantity BuyBack Item Item Category Unit --- --- en t Item Code m Maximum Quantity --- Item Category --- No Item :224 code224 Description Supply and Termination of above cable by using BNC connector and DC pin with all accessories. SR item(yes/no) No Quantity 102 Minimum Quantity BuyBack Item ur em Item Code Unit --- m Maximum Quantity --- Item Category --- No Item :225 Item Code code225 Description Supply and fixing of Krone type tag block with lock & key enclosed in a MS. box of cable terminations.5 Pair SR item(yes/no) No Quantity 8 ro c Unit Minimum Quantity BuyBack Item --- Nos Maximum Quantity --- Item Category --- No Item :226 code226 Description Supply and fixing of Krone type tag block with lock & key enclosed in a MS. box of cable terminations.20 Pair SR item(yes/no) No Quantity 4 ep Item Code Minimum Quantity BuyBack Item --- Unit Nos Maximum Quantity --- Item Category --- No Item :227 Item Code code227 Description Supply and Installation of EPABX for Intercom system for 1 No. Direct 81 of 135 lines, 1No. STD Line, 24Nos. Extension Lines, with other standard specification. No Quantity 1 Minimum Quantity BuyBack Item Unit --- Nos en t SR item(yes/no) Maximum Quantity --- Item Category --- No Item :228 code228 Description PROJECTORS AND SCREEN SUITABLE: Supplying, installation, testing, commissioning 2000 lumens, WXGA Resolution Multimedia Projector, the projectors 1920x1080 and should support all relevant WXGA variants. They should additionally support other relevant resolutions, like VGA, XGA and SXGA. The projectors should at a minimum support HDTV at 720p. It should be possible to connect a laptop with the above-mentioned video formats, and choose between various sources without having to make changes in the setup menu for the projectors. Switching between sources with 4:3 formats and widescreen formats should be automatically managed with the correct aspect ratio. If necessary, a scaler should be included in order to satisfy the above-mentioned requirements. SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Item :229 Unit --- Nos Maximum Quantity --- Item Category --- No code229 ro c Item Code ur em Item Code Description Supply, laying and installation of HDMI Cables including Termination and all necessary accessories. SR item(yes/no) No Quantity 60 Minimum Quantity BuyBack Item --- Unit m Maximum Quantity --- Item Category --- No Item :230 code230 Description Supply, laying and installation of RGB Cables including Termination and all necessary accessories. SR item(yes/no) No Quantity 45 ep Item Code Minimum Quantity Unit --- Maximum Quantity m --- 82 of 135 BuyBack Item No Item :231 code231 Description Supply, laying and installation of VGA Cables including Termination and all necessary accessories. SR item(yes/no) No Quantity 25 Minimum Quantity BuyBack Item Item Category Unit --- --- en t Item Code m Maximum Quantity --- Item Category --- No Item :232 code232 Description Supply & Fixing of Table top Flip tops comprising of 1 No. Data, 1 No. Telephone outlet & 2x6A Socket controlled by 6A Switch, including all necessary accessories. SR item(yes/no) No Quantity 20 Minimum Quantity BuyBack Item Item :233 ur em Item Code Unit --- No Maximum Quantity --- Item Category --- No code233 Description Internal Electrification Open Conduit System Supplying heavy gauge PVC conduit pipe……mm dia ......mm thick conforming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc.,and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 32 mm dia 2.5mm thick ro c Item Code SR item(yes/no) No Quantity 150 Minimum Quantity BuyBack Item --- Unit Mtr Maximum Quantity --- Item Category --- No Item :234 code234 Description Concealed Conduit System Supplying heavy gauge PVC conduit pipe…… mm dia ......mm thick conforming to IS 2509 with suitable size bends,metal/PVC junction boxes,adhesive paste etc.,and running before slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18 SWG GI fish wire wherever necessary. 25 mm dia 2mm thick ep Item Code 83 of 135 SR item(yes/no) No Quantity 350 BuyBack Item --- Mtr Maximum Quantity --- en t Minimum Quantity Unit No Item :235 code235 Description Concealed Conduit System Supplying heavy gauge PVC conduit pipe…… mm dia ......mm thick conforming to IS 2509 with suitable size bends,metal/PVC junction boxes,adhesive paste etc.,and running before slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18 SWG GI fish wire wherever necessary. 20 mm dia 2mm thick SR item(yes/no) No Quantity 340 Minimum Quantity BuyBack Item Item :236 Item Category --- ur em Item Code Unit --- Mtr Maximum Quantity --- Item Category --- No code236 Description Concealed Conduit System Supplying heavy gauge PVC conduit pipe…… mm dia ......mm thick conforming to IS 2509 with suitable size bends,metal/PVC junction boxes,adhesive paste etc.,and running before slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18 SWG GI fish wire wherever necessary. 32 mm dia 2.5mm thick ro c Item Code SR item(yes/no) No Quantity 150 Minimum Quantity BuyBack Item --- Unit Mtr Maximum Quantity --- Item Category --- No Item :237 code237 Description Supplying heavy gauge PVC conduit pipe……mm dia ......mm thick with suitable size bends,metal junction boxes,adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 25 mm dia 2mm thick ep Item Code SR item(yes/no) No Quantity 350 Minimum Quantity Unit --- Maximum Quantity Mtr --- 84 of 135 BuyBack Item No Item :238 code238 Description Supplying heavy gauge PVC conduit pipe……mm dia ......mm thick with suitable size bends,metal junction boxes,adhesive paste etc.,by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 20 mm dia 2mm thick SR item(yes/no) No Quantity 150 Minimum Quantity Item :239 Unit --- --- Mtr Maximum Quantity No --- ur em BuyBack Item Item Category en t Item Code Item Code code239 Description Supplying and flush mounting powder coated / galvanised metal box suitable for mounting modular witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC wall. 1-3 Way SR item(yes/no) No Quantity 70 Minimum Quantity BuyBack Item Item :240 Item Category Unit --- --- Each Maximum Quantity --- Item Category --- No code240 Description Supplying and flush mounting powder coated / galvanised metal box suitable for mounting modular witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC wall. 4-5 Way ro c Item Code SR item(yes/no) No Quantity 45 Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :241 code241 ep Item Code Description Supplying and flush mounting powder coated / galvanised metal box suitable for mounting modular witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC wall. 6 Way SR item(yes/no) No Quantity 45 Minimum Quantity Unit --- Maximum Quantity Each --- 85 of 135 BuyBack Item No Item :242 code242 Description Supplying and flush mounting powder coated / galvanised metal box suitable for mounting modular witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC wall. 8 Way SR item(yes/no) No Quantity 50 Minimum Quantity BuyBack Item Item Category Unit --- --- en t Item Code Each Maximum Quantity --- Item Category --- No Item :243 code243 Description Supplying and flush mounting powder coated / galvanised metal box suitable for mounting modular witch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/CC wall. 12 Way SR item(yes/no) No Quantity 20 Minimum Quantity BuyBack Item Item :244 ur em Item Code Unit --- Each Maximum Quantity --- Item Category --- No code244 Description Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ PVC box. 1-3 Way ro c Item Code SR item(yes/no) No Quantity 65 Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :245 code245 Description Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ PVC box. 4 Way SR item(yes/no) No Quantity 65 ep Item Code Minimum Quantity Unit --- Maximum Quantity Each --- 86 of 135 BuyBack Item No Item :246 code246 Description Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ PVC box. 6 Way SR item(yes/no) No Quantity 70 Minimum Quantity Item :247 Unit --- --- Each Maximum Quantity No --- ur em BuyBack Item Item Category en t Item Code Item Code code247 Description Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ PVC box. 8 Way SR item(yes/no) No Quantity 30 Minimum Quantity BuyBack Item Item :248 Item Category Unit --- --- Each Maximum Quantity --- Item Category --- No code248 Description Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/ PVC box. 12 Way ro c Item Code SR item(yes/no) No Quantity 25 Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :249 code249 Description Supplying 4 mm thick plastic sheet with necessary nitches for fixing switches regulators etc, and fixing on existing wooden / metal box using N.F screws. SR item(yes/no) No Quantity 12000 ep Item Code Minimum Quantity Unit --- Maximum Quantity Sq CM --87 of 135 BuyBack Item No Item :250 code250 Description Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Short point upto 3 Mtr from the tapping point to outlet via switch box. SR item(yes/no) No Quantity 10 BuyBack Item Item :251 Unit --- Each ur em Minimum Quantity Item Category en t Item Code --- Maximum Quantity --- Item Category --- No code251 Description Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Medium point above 3 Mtr upto 6 mtr from tapping point to outlet via switch box. ro c Item Code SR item(yes/no) No Quantity 10 Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :252 code252 Description Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Long point above 6 ep Item Code 88 of 135 Mtr upto 10 Mtr. tapping point from outlet via switch box. No Quantity 25 Minimum Quantity BuyBack Item Unit --- Each Maximum Quantity --- Item Category --- en t SR item(yes/no) No Item :253 code253 Description Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Two out let in a row, above 3 meter upto 6 meter from tapping point to outlet via switch SR item(yes/no) No Quantity 10 Minimum Quantity BuyBack Item Item :254 ur em Item Code Unit --- Each Maximum Quantity --- Item Category --- No code254 Description Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Three out let in a row, above 6 meter upto 10 meter from tapping point to outlet via switch ro c Item Code SR item(yes/no) No Quantity 20 ep Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :255 Item Code code255 Description Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi-strand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & 89 of 135 cofirming to latest amendments. 1.5 sqmm No Quantity 1000 Minimum Quantity BuyBack Item Unit --- Mtr Maximum Quantity --- Item Category --- No Item :256 en t SR item(yes/no) Item Code code256 Description Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi-strand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & cofirming to latest amendments. 2.5 sqmm SR item(yes/no) No Quantity 1375 BuyBack Item Item :257 Mtr ur em Minimum Quantity Unit --- Maximum Quantity --- Item Category --- No Item Code code257 Description Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi-strand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & cofirming to latest amendments. 4 sqmm SR item(yes/no) No Quantity 446.46 --- ro c Minimum Quantity Unit BuyBack Item Mtr Maximum Quantity --- Item Category --- No Item :258 code258 Description Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi-strand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & cofirming to latest amendments. 6 sqmm SR item(yes/no) No Quantity 80 ep Item Code Minimum Quantity BuyBack Item --- Unit Mtr Maximum Quantity --- Item Category --- No Item :259 Item Code code259 Description Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V 90 of 135 grade, multi-strand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & cofirming to latest amendments. 10 sqmm No Quantity 200 Minimum Quantity BuyBack Item Unit --- Mtr en t SR item(yes/no) Maximum Quantity --- Item Category --- No Item :260 code260 Description Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi-strand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & cofirming to latest amendments. 16 sqmm SR item(yes/no) No Quantity 140 ur em Item Code Minimum Quantity BuyBack Item Unit --- Mtr Maximum Quantity --- Item Category --- No Item :261 Item Code code261 Description Modular Switches, Sockets, Fan Regulators, TV/Telephone sockets with Networking&Telecommunications Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps One Way switch SR item(yes/no) No Quantity 450 ro c Unit Minimum Quantity BuyBack Item --- Each Maximum Quantity --- Item Category --- No Item :262 code262 Description Modular Switches, Sockets, Fan Regulators, TV/Telephone sockets with Networking&Telecommunications Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps Two Way switch ep Item Code SR item(yes/no) No Quantity 6 Minimum Quantity BuyBack Item Unit --- Each Maximum Quantity --- Item Category --- No Item :263 Item Code code263 91 of 135 Description Modular Switches, Sockets, Fan Regulators, TV/Telephone sockets with Networking&Telecommunications Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6 Amps 3 Way socket SR item(yes/no) No Quantity 250 BuyBack Item --- Each en t Minimum Quantity Unit Maximum Quantity --- Item Category --- No Item :264 code264 Description Modular Switches, Sockets, Fan Regulators, TV/Telephone sockets with Networking&Telecommunications Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator SR item(yes/no) No Quantity 60 Minimum Quantity BuyBack Item Item :265 ur em Item Code Unit --- Each Maximum Quantity --- Item Category --- No Item Code code265 Description Modular Switches, Sockets, Fan Regulators, TV/Telephone sockets with Networking&Telecommunications Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16 Amps One Way switch SR item(yes/no) No Quantity 22 ro c Unit Minimum Quantity BuyBack Item --- Each Maximum Quantity --- Item Category --- No Item :266 code266 Description Modular Switches, Sockets, Fan Regulators, TV/Telephone sockets with Networking&Telecommunications Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16 Amps universel socket ep Item Code SR item(yes/no) No Quantity 18 Minimum Quantity BuyBack Item Unit --- Maximum Quantity Each --- No Item :267 92 of 135 code267 Description Modular Switches, Sockets, Fan Regulators, TV/Telephone sockets with Networking&Telecommunications Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Telephone Socket - RJ 11/TV Socket SR item(yes/no) No Quantity 6 Minimum Quantity BuyBack Item Item Category Unit --- --- en t Item Code Each Maximum Quantity --- Item Category --- No Item :268 code268 Description Supplying and Fixing regular MCB distribution board on wall / wood board / flush mounting using required clamps, bolts, nuts, etc., with provision for fixing suitable type capacity MCB's single phase / Three phase double door with powder coated painting, made out of 14 SWG MS enclosure, complete. 4 Way TPN Distribution Board SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item ur em Item Code Unit --- Each Maximum Quantity --- Item Category --- No Item :269 code269 Description Supplying and Fixing regular MCB distribution board on wall / wood board / flush mounting using required clamps, bolts, nuts, etc., with provision for fixing suitable type capacity MCB's single phase / Three phase double door with powder coated painting, made out of 14 SWG MS enclosure, complete. 6 Way TPN Distribution Board ro c Item Code SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :270 code270 Description Supplying and Fixing regular MCB distribution board on wall / wood board / flush mounting using required clamps, bolts, nuts, etc., with provision for fixing suitable type capacity MCB's single phase / Three phase double door with powder coated painting, made out of 14 SWG MS enclosure, complete. 8 Way TPN Distribution Board SR item(yes/no) No Quantity 3 ep Item Code Unit Each 93 of 135 Minimum Quantity Maximum Quantity --- No Item :271 en t BuyBack Item --- Item Code code271 Description Supplying and Fixing regular MCB distribution board on wall / wood board / flush mounting using required clamps, bolts, nuts, etc., with provision for fixing suitable type capacity MCB's single phase / Three phase double door with powder coated painting, made out of 14 SWG MS enclosure, complete. 12Way SP & N SR item(yes/no) No Quantity 2 BuyBack Item Unit --- --- Each Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category No Item :272 Item Code code272 Description Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10 kA and wiring complete as required confirming to IEC 60898. 6-32Amps SP SR item(yes/no) No Quantity 60 Minimum Quantity --- Each Maximum Quantity --- Item Category --- No ro c BuyBack Item Unit Item :273 code273 Description Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10 kA and wiring complete as required confirming to IEC 60898. 40 Amps TPN SR item(yes/no) No Quantity 4 ep Item Code Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :274 Item Code code274 Description Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, 94 of 135 indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10 kA and wiring complete as required confirming to IEC 60898. 50-63AmpsTPN No Quantity 5 Minimum Quantity BuyBack Item Unit --- Each en t SR item(yes/no) Maximum Quantity --- Item Category --- No Item :275 code275 Description Supplying and Fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking capacity of 10 kA and wiring complete as required confirming to IEC 60898. 40 Amps DP SR item(yes/no) No Quantity 3 Minimum Quantity BuyBack Item ur em Item Code Unit --- Each Maximum Quantity --- Item Category --- No Item :276 Item Code code276 Description Supplying , fixing and wiring Residual Current Circuit Breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood / panel board. 63 Amps 4 Pole, 300mA SR item(yes/no) No Quantity 3 ro c Unit Minimum Quantity BuyBack Item --- Each Maximum Quantity --- Item Category --- No Item :277 code277 Description TELEPHONE WORKS & DATA WORKS Supplying and drawing PVC flexible one pair telephone unarmoured tinned Copper cable of approved make. 2 Pair SR item(yes/no) No Quantity 120 ep Item Code Minimum Quantity BuyBack Item --- Unit Mtr Maximum Quantity --- Item Category --- No Item :278 Item Code code278 95 of 135 Description TELEPHONE WORKS & DATA WORKS Supplying and drawing PVC flexible one pair telephone unarmoured tinned Copper cable of approved make. 5 Pair SR item(yes/no) No Quantity 60 BuyBack Item --- Mtr en t Minimum Quantity Unit Maximum Quantity --- Item Category --- No Item :279 Item Code code279 Description Supplying and Drawing UTP-CAT - 6E LAN Cable SR item(yes/no) No Quantity 50 BuyBack Item Mtr ur em Minimum Quantity Unit --- Maximum Quantity --- Item Category --- No Item :280 Item Code code280 Description Telephone Junction Box (Main Distribution Frame) - 20 Pair -2 Nos Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. and M.S.flat .. with bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . a) 40 x 40 x 6 mm . SR item(yes/no) No Quantity 1 Minimum Quantity --- Mtr Maximum Quantity --- Item Category --- No ro c BuyBack Item Unit Item :281 code281 Description Telephone Junction Box (Main Distribution Frame) - 20 Pair -2 Nos Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. and M.S.flat .. with bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . b) 50 x 50 x6 mm . SR item(yes/no) No Quantity 1 ep Item Code Minimum Quantity BuyBack Item --- Unit Mtr Maximum Quantity --- Item Category --- No Item :282 Item Code code282 Description Fabricating supplying and mounting MS box made out …. SWG suitable for floor / wall mounting , fully weather poof with provision for better 96 of 135 SR item(yes/no) No Quantity 3000 Minimum Quantity BuyBack Item Unit --- en t heat dissipation, provided with hinged front cover, equipped with tamper poof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7 tank treatment with powder coated paint and finally finished with approved colour etc., complete . b) 14 SWG Sq CM Maximum Quantity --- Item Category --- No Item :283 code283 Description Supplying, fixing and wiring of earth electrode for grounding of lifts, Transformers DG Sets etc, using 40mm dia 2.9 mm thick 2.5 meter long GI pipe with GI nnel with mesh & suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400 X 400 X 400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using bolts and nuts.(KPWD SR 2019-2020 / I.No.6.2/Pg.No.40). SR item(yes/no) No Quantity 4 Minimum Quantity BuyBack Item ur em Item Code Unit --- No Maximum Quantity --- Item Category --- No Item :284 code284 Description Supply and Installation of Conventional type, 5 segment 50mm dia hollow copper spike (air termination rod) for lightning protection with copper down rod and necessary fixing hardware as per IS 2309, 1969 ( MR) SR item(yes/no) No Quantity 2 ro c Item Code Minimum Quantity No Maximum Quantity --- Item Category --- No ep BuyBack Item --- Unit Item :285 Item Code code285 Description Supplying and running of GI/Copper stripes for grounding connections, using necessary fixing materials as required.(KPWD SR 2019-2020 / I.No.6.3.1, 6.3.2 /Pg.No.40). a) 25 X 3 mm GI strip SR item(yes/no) No Unit Mtr 97 of 135 200 Minimum Quantity BuyBack Item --- Maximum Quantity --- No Item :286 en t Quantity Item Code code286 Description Supplying and running of GI/Copper stripes for grounding connections, using necessary fixing materials as required.(KPWD SR 2019-2020 / I.No.6.3.1, 6.3.2 /Pg.No.40). a) 25 X 6 mm GI Strip SR item(yes/no) No Quantity 50 BuyBack Item Item :287 Unit --- --- Mtr Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category No Item Code code287 Description Supplying and running GI/Copper conductor for grounding and ( along with other wires in conduit system of wiring ) using necessary suitable size clamps, Nails, gattas/Spacers etc,.(KPWD SR 2019-2020 / I.No.6.18.6, 6.18.5, 6.18.3, 6.18.2 /Pg.No.43-44). a) 8 SWG Copper wire SR item(yes/no) No Quantity 100 Minimum Quantity BuyBack Item Item :288 Unit --- Mtr Maximum Quantity --- Item Category --- No code288 Description Supplying and running GI/Copper conductor for grounding and ( along with other wires in conduit system of wiring ) using necessary suitable size clamps, Nails, gattas/Spacers etc,.(KPWD SR 2019-2020 / I.No.6.18.6, 6.18.5, 6.18.3, 6.18.2 /Pg.No.43-44). b) 10 SWG Copper wire SR item(yes/no) No Quantity 100 ro c Item Code Minimum Quantity Mtr Maximum Quantity --- Item Category --- No ep BuyBack Item --- Unit Item :289 Item Code code289 Description Supplying and running GI/Copper conductor for grounding and ( along with other wires in conduit system of wiring ) using necessary suitable size clamps, Nails, gattas/Spacers etc,.(KPWD SR 2019-2020 / I.No.6.18.6, 6.18.5, 6.18.3, 6.18.2 /Pg.No.43-44). c) 8 SWG GI wire SR item(yes/no) No Unit Mtr 98 of 135 20 Minimum Quantity BuyBack Item --- Maximum Quantity --- No Item :290 en t Quantity Item Code code290 Description Supplying and running GI/Copper conductor for grounding and ( along with other wires in conduit system of wiring ) using necessary suitable size clamps, Nails, gattas/Spacers etc,.(KPWD SR 2019-2020 / I.No.6.18.6, 6.18.5, 6.18.3, 6.18.2 /Pg.No.43-44). d) 10 SWG GI wire SR item(yes/no) No Quantity 20 BuyBack Item Item :291 Unit --- --- Mtr Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category No Item Code code291 Description Supplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. a. 450 X 50 mm SR item(yes/no) No Quantity 30 Minimum Quantity BuyBack Item Item :292 Unit --- Mtr Maximum Quantity --- Item Category --- No code292 Description ELECTRICAL FIXTURES Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting. 1x2 ' - 9/10w SR item(yes/no) No Quantity 80 ro c Item Code ep Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :293 Item Code code293 Description ELECTRICAL FIXTURES Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 99 of 135 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting. 1x4' - 20/22 w No Quantity 40 Minimum Quantity BuyBack Item Unit --- Each en t SR item(yes/no) Maximum Quantity --- Item Category --- No Item :294 code294 Description ELECTRICAL FIXTURES Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting. 2x4' - 20/22 w SR item(yes/no) No Quantity 4 Minimum Quantity BuyBack Item Item :295 ur em Item Code Unit --- Each Maximum Quantity --- Item Category --- No code295 Description LED Type Tube Light Fitting - Fixing Fixing all types and capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafter / griders using 23/0.0076" twin twisted PVC insulated wires, required no.s of round blocks and clamps. a) On Wall / Ceiling / Rafter / Griders ro c Item Code SR item(yes/no) No Quantity 180 Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :296 code296 Description LED Type Tube Light Fitting - Fixing Fixing all types and capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafter / griders using 23/0.0076" twin twisted PVC insulated wires, required no.s of round blocks and clamps. b) Using necessary length of G.I. Chain SR item(yes/no) No Quantity 60 ep Item Code Minimum Quantity Unit --- Maximum Quantity Each --100 of 135 BuyBack Item No Item :297 code297 Description Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED Square or round down light 10-12 W SR item(yes/no) No Quantity 6 BuyBack Item Item :298 Unit --- Each ur em Minimum Quantity Item Category en t Item Code --- Maximum Quantity --- Item Category --- No code298 Description Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED Square or round down light 15-18 W ro c Item Code SR item(yes/no) No Quantity 25 Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :299 code299 Description Fixing all types and capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafter / griders using 23/0.0076" twin twisted PVC insulated wires, required no.s of round blocks and clamps. a) On Wall / Ceiling / Rafter / Griders SR item(yes/no) No Quantity 25 ep Item Code Minimum Quantity Unit --- Maximum Quantity Each --- 101 of 135 BuyBack Item No Item :300 code300 Description Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED Square or round down light 5-6 W (Mirror Light) SR item(yes/no) No Quantity 20 BuyBack Item Item :301 Unit --- Each ur em Minimum Quantity Item Category en t Item Code --- Maximum Quantity --- Item Category --- No code301 Description Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED Square or round down light 10-12 W (Bulk head Light) ro c Item Code SR item(yes/no) No Quantity 10 Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :302 code302 Description Fixing all types and capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafter / griders using 23/0.0076" twin twisted PVC insulated wires, required no.s of round blocks and clamps. a) On Wall / Ceiling / Rafter / Griders SR item(yes/no) No Quantity 15 ep Item Code Minimum Quantity Unit --- Maximum Quantity Each --- 102 of 135 BuyBack Item No Item :303 code303 Description a)Capacitor Type Ceiling Fan - Supply Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system 48" Sweep (1200mm) Regular model SR item(yes/no) No Quantity 40 Minimum Quantity Item :304 Unit --- --- Each Maximum Quantity No --- ur em BuyBack Item Item Category en t Item Code Item Code code304 Description Supplying wall mounting Fan suitable to operate at single-phase 230V AC supply . 400 mm Sweep SR item(yes/no) No Quantity 40 Minimum Quantity BuyBack Item Item :305 Item Category Unit --- --- Each Maximum Quantity --- Item Category --- No code305 Description Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. ro c Item Code SR item(yes/no) No Quantity 100 Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No ep Item :306 Item Code code306 Description a)Supplying exhaust fan of 1440 RPM of 300mm (12" ) size with bracket blades complete for light duty suitable to operate on 230v 50Hz , AC Supply… SR item(yes/no) No Quantity 25 Minimum Quantity Unit --- Maximum Each --103 of 135 Quantity BuyBack Item No Item :307 code307 Description Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire of approved make with wire mesh and wooden frame. SR item(yes/no) No Quantity 25 BuyBack Item Unit --- --- Each Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category en t Item Code No Item :308 Item Code code308 Description Supplying , fixing & wiring earth leakage relay with core balanced current transformer suitable for single phase 50 HZ AC with latest microcontroller based, digital readout of pecentage leakage current, programable delay / auto / maunal reset facility suitable to mount on DIN rail / flush mounting on panel board . SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Unit --- Each Maximum Quantity --- Item Category --- No ro c Item :309 Item Code code309 Description Supplying & fixing of shunt trip suitable for MCCB.CBCT . SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No ep Item :310 Item Code code310 Description Supplying , fixing of LED type panel board indicating lamp with required colour suitable for 230/440v AC 50Hz 12/24v DC. SR item(yes/no) No Quantity 6 Minimum Quantity Unit --- Maximum Quantity Each --- 104 of 135 BuyBack Item No Item :311 code311 Description Supplying , fixing and wiring 0 to 600 Volts 96x96 mm AC Voltmeter on exising panel / woodboard . SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Item Category Unit --- --- en t Item Code Each Maximum Quantity --- Item Category --- No Item :312 code312 Description Supplying , fixing and wiring rotary selector switch suitable for Voltmeter . SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item ur em Item Code Unit --- Each Maximum Quantity --- Item Category --- No Item :313 Item Code code313 Description Supplying , fixing and wiring 3 Phase Digital Ammeter SR item(yes/no) No Quantity 1 --- ro c Minimum Quantity Unit BuyBack Item Each Maximum Quantity --- Item Category --- No Item :314 Item Code code314 Description Supplying , fixing and wiring rotary selector switch suitable for Ammeter SR item(yes/no) No Quantity 1 --- ep Minimum Quantity BuyBack Item Unit Each Maximum Quantity --- Item Category --- No Item :315 Item Code code315 Description Supplying , fixing and wiring 50/5 to 400/5 Amps 5 VA burden current Transformer .class 0.5 accuracy tape wound SR item(yes/no) No Unit Each 105 of 135 6 Minimum Quantity BuyBack Item --- Maximum Quantity --- No Item :316 en t Quantity Item Code code316 Description Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter. SR item(yes/no) No Quantity 1 Minimum Quantity Unit --- Each Maximum Quantity No Item :317 --- --- ur em BuyBack Item Item Category Item Code code317 Description Supplying & fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wring complete . Protection of Overload and Shortcircuit with thermal Magnetic / Microprocessed release and Earth Fault as per IS-13947 ( Icu=Ics ) a. Four POLE,160 Amps 25KA SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Item Category Unit --- --- Each Maximum Quantity --- Item Category --- No Item :318 code318 Description Supplying & fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wring complete . Protection of Overload and Shortcircuit with thermal Magnetic / Microprocessed release and Earth Fault as per IS-13947 ( Icu=Ics ) b. Three POLE,63 Amps 25KA SR item(yes/no) No Quantity 2 ro c Item Code --- ep Minimum Quantity BuyBack Item Unit Each Maximum Quantity --- Item Category --- No Item :319 Item Code code319 Description Supplying & fixing miniature Circuit breakers on existing MCB distribution boards using necessary fixing materials and C-type curve,indicator ON/ OFF energy cross-3 with short circuit brreaking capacity of 10K and complete wiring as required to IEC 60898. A) 6-32 Amps SP 106 of 135 No Quantity 3 Minimum Quantity BuyBack Item Unit --- Each Maximum Quantity No Item :320 --- en t SR item(yes/no) Item Code code320 Description Supplying & fixing miniature Circuit breakers on existing MCB distribution boards using necessary fixing materials and C-type curve,indicator ON/ OFF energy cross-3 with short circuit brreaking capacity of 10K and complete wiring as required to IEC 60898. B) 40 Amps DP SR item(yes/no) No Quantity 6 BuyBack Item Unit --- Each ur em Minimum Quantity Item Category --- Maximum Quantity --- Item Category --- No Item :321 Item Code code321 Description Supplying & fixing miniature Circuit breakers on existing MCB distribution boards using necessary fixing materials and C-type curve,indicator ON/ OFF energy cross-3 with short circuit brreaking capacity of 10K and complete wiring as required to IEC 60898. C) 50-63A,TPN,MCB SR item(yes/no) No Quantity 12 Minimum Quantity --- Each Maximum Quantity --- Item Category --- No ro c BuyBack Item Unit Item :322 Item Code code322 Description Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely. 20mm SR item(yes/no) No Quantity 5 ep Minimum Quantity BuyBack Item --- Unit Mtr Maximum Quantity --- Item Category --- No Item :323 Item Code code323 Description Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and 107 of 135 on either end of the pipe terminated completely. 25mm No Quantity 5 Minimum Quantity BuyBack Item Unit --- Mtr Maximum Quantity --- Item Category --- No Item :324 en t SR item(yes/no) Item Code code324 Description Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely. 32mm SR item(yes/no) No Quantity 5 BuyBack Item Item :325 Mtr ur em Minimum Quantity Unit --- Maximum Quantity --- Item Category --- No code325 Description Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. a) 250 Amps 4 x 30 x 10 mm Aluminum strips . SR item(yes/no) No Quantity 1.6 ro c Item Code Minimum Quantity BuyBack Item --- Unit Mtr Maximum Quantity --- Item Category --- No Item :326 code326 Description Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. a) 100 Amps 4 x 30 x 6 mm Aluminum strips . ep Item Code SR item(yes/no) No Quantity 0.6 Unit Mtr 108 of 135 Minimum Quantity Maximum Quantity --- No Item :327 en t BuyBack Item --- Item Code code327 Description Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . a) 40 x 40 x 6 mm . SR item(yes/no) No Quantity 8 Minimum Quantity Unit --- Mtr Maximum Quantity No Item :328 --- --- ur em BuyBack Item Item Category Item Code code328 Description Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . b) 50 x 50 x6 mm . SR item(yes/no) No Quantity 5 Minimum Quantity BuyBack Item Item Category Unit --- --- Mtr Maximum Quantity --- Item Category --- No Item :329 code329 Description Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . c) 75 x75 x 6 mm . ro c Item Code SR item(yes/no) No Quantity 5 Minimum Quantity BuyBack Item --- Unit Mtr Maximum Quantity --- Item Category --- No Item :330 code330 Description Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . d ) 50 x 100 x 50 x 6 mm C channel . SR item(yes/no) No Quantity 5 ep Item Code Minimum Quantity Unit --- Maximum Mtr --109 of 135 Quantity BuyBack Item No Item :331 code331 Description Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. a) 14 SWG SR item(yes/no) No Quantity 39600 BuyBack Item Unit --- Sq CM ur em Minimum Quantity Item Category en t Item Code --- Maximum Quantity --- Item Category --- No Item :332 Item Code code332 Description Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required . 25 x 6 mm SR item(yes/no) No Quantity 3 Minimum Quantity BuyBack Item Unit --- Mtr Maximum Quantity --- Item Category --- No Item :333 code333 Description Main LT Panel UG Cables, Ext. Lighting Supplying , fixing & wiring earth leakage relay with core balanced current transformer suitable for single phase 50 HZ AC with latest microcontroller based, digital readout of pecentage leakage current, programable delay / auto / maunal reset facility suitable to mount on DIN rail / flush mounting on panel board . SR item(yes/no) No Quantity 1 ro c Item Code --- ep Minimum Quantity BuyBack Item Unit Each Maximum Quantity --- Item Category --- No Item :334 Item Code code334 Description Supplying & fixing of shunt trip suitable for MCCB.CBCT . SR item(yes/no) No Quantity 1 Unit Each 110 of 135 Minimum Quantity Maximum Quantity --- No Item :335 en t BuyBack Item --- Item Code code335 Description Supplying , fixing of LED type panel board indicating lamp with required colour suitable for 230/440v AC 50Hz 12/24v DC. SR item(yes/no) No Quantity 4 Minimum Quantity Unit --- Each Maximum Quantity No Item :336 --- --- ur em BuyBack Item Item Category Item Code code336 Description Supplying of multi function Digital meter with three line back light LCD type display for V, C, F, KW, PF, KVA , KWH, KVAR suitable for 3 phase 4 wire LT network with IP 54 degree of protection and completely wired as required with Communication port and class0.5 accuracy. SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Item Category Unit --- --- Each Maximum Quantity --- Item Category --- No Item :337 code337 Description Supplying , fixing and wiring 50/5 to 400/5 Amps 5 VA burden current Transformer .class 0.5 accuracy tape wound ro c Item Code SR item(yes/no) No Quantity 4 Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :338 code338 Description Supplying & fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wring complete . Protection of Overload and Shortcircuit with thermal Magnetic / Microprocessed release and Earth Fault as per IS-13947 ( Icu=Ics ) b. 250 Amps 35KA SR item(yes/no) No Quantity 1 ep Item Code Minimum Quantity Unit --- Maximum Each --111 of 135 Quantity BuyBack Item No Item :339 code339 Description Supplying & fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wring complete . Protection of Overload and Shortcircuit with thermal Magnetic / Microprocessed release and Earth Fault as per IS-13947 ( Icu=Ics ) 160Amps 25 KA SR item(yes/no) No Quantity 1 BuyBack Item Unit --- --- Each Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category en t Item Code No Item :340 Item Code code340 Description Supplying & fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wring complete . Protection of Overload and Shortcircuit with thermal Magnetic / Microprocessed release and Earth Fault as per IS-13947 ( Icu=Ics ) 100Amps 25 KA SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Unit --- Each Maximum Quantity --- Item Category --- No ro c Item :341 Item Code code341 Description Supplying & fixing miniature Circuit breakers on existing MCB distribution boards using necessary fixing materials and C-type curve,indicator ON/ OFF energy cross-3 with short circuit brreaking capacity of 10K and complete wiring as required to IEC 60898. A) 6-32 Amps SP SR item(yes/no) No Quantity 4 --- ep Minimum Quantity BuyBack Item Unit Each Maximum Quantity --- Item Category --- No Item :342 Item Code code342 Description Supplying & fixing miniature Circuit breakers on existing MCB distribution boards using necessary fixing materials and C-type curve,indicator ON/ OFF energy cross-3 with short circuit brreaking capacity of 10K and complete wiring as required to IEC 60898. B) 50-63A,TPN,MCB 112 of 135 No Quantity 1 Minimum Quantity BuyBack Item Unit --- Each Maximum Quantity No Item :343 --- en t SR item(yes/no) Item Code code343 Description Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter. SR item(yes/no) No Quantity 2 BuyBack Item Unit --- --- Each Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category No Item :344 Item Code code344 Description Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely. 20mm SR item(yes/no) No Quantity 7 Minimum Quantity BuyBack Item --- Mtr Maximum Quantity --- Item Category --- No ro c Item :345 Unit Item Code code345 Description Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely. 25mm SR item(yes/no) No Quantity 12 --- ep Minimum Quantity BuyBack Item Unit Mtr Maximum Quantity --- Item Category --- No Item :346 Item Code code346 Description Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely. 32mm 113 of 135 SR item(yes/no) No Quantity 7 BuyBack Item --- Mtr Maximum Quantity --- en t Minimum Quantity Unit No Item :347 code347 Description Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. a) 400 Amps 4 x 50 x10 mm Aluminum strips . SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Item Category --- ur em Item Code Unit --- Mtr Maximum Quantity --- Item Category --- No Item :348 code348 Description Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. b) 250 Amps 4 x 30 x 10 mm Aluminum strips . ro c Item Code SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item --- Unit Mtr Maximum Quantity --- Item Category --- No Item :349 code349 Description Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. c) 100 Amps 4 x 30 x 6 mm Aluminum strips . ep Item Code 114 of 135 No Quantity 1 Minimum Quantity BuyBack Item Unit --- Mtr Maximum Quantity No Item :350 --- en t SR item(yes/no) Item Code code350 Description Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . a) 40 x 40 x 6 mm . SR item(yes/no) No Quantity 15 BuyBack Item Item :351 Unit --- --- Mtr Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category No Item Code code351 Description Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . b) 50 x 50 x6 mm . SR item(yes/no) No Quantity 12 Minimum Quantity BuyBack Item --- Mtr Maximum Quantity --- Item Category --- No ro c Item :352 Unit Item Code code352 Description Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . c) 75 x75 x 6 mm . SR item(yes/no) No Quantity 12 Minimum Quantity Mtr Maximum Quantity --- Item Category --- No ep BuyBack Item --- Unit Item :353 Item Code code353 Description Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . d ) 50 x 100 x 50 x 6 mm C channel . SR item(yes/no) No Unit Mtr 115 of 135 5 Minimum Quantity BuyBack Item --- Maximum Quantity --- No Item :354 en t Quantity Item Code code354 Description Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. a) 14 SWG SR item(yes/no) No Quantity 30000 BuyBack Item Unit --- Sq CM ur em Minimum Quantity Item Category --- Maximum Quantity --- Item Category --- No Item :355 Item Code code355 Description Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required . 25 x 6 mm SR item(yes/no) No Quantity 3 Minimum Quantity --- Mtr Maximum Quantity --- Item Category --- No ro c BuyBack Item Unit Item :356 code356 Description Supplying , fixing & wiring earth leakage relay with core balanced current transformer suitable for single phase 50 HZ AC with latest microcontroller based, digital readout of pecentage leakage current, programable delay / auto / maunal reset facility suitable to mount on DIN rail / flush mounting on panel board . SR item(yes/no) No Quantity 1 ep Item Code Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :357 Item Code code357 Description Supplying & fixing of shunt trip suitable for MCCB.CBCT . SR item(yes/no) No Unit Each 116 of 135 1 Minimum Quantity BuyBack Item --- Maximum Quantity --- No Item :358 en t Quantity Item Code code358 Description Supplying , fixing of LED type panel board indicating lamp with required colour suitable for 230/440v AC 50Hz 12/24v DC. SR item(yes/no) No Quantity 6 Minimum Quantity Unit --- Each Maximum Quantity No Item :359 --- --- ur em BuyBack Item Item Category Item Code code359 Description Supplying , fixing and wiring 0 to 600 Volts 96x96 mm AC Voltmeter on exising panel / woodboard . SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Item Category Unit --- --- Each Maximum Quantity --- Item Category --- No Item :360 code360 Description Supplying , fixing and wiring rotary selector switch suitable for Voltmeter . ro c Item Code SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :361 code361 Description Supplying , fixing and wiring 3 Phase Digital Ammeter ep Item Code SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Unit --- Each Maximum Quantity --- Item Category --- No Item :362 Item Code code362 117 of 135 Description Supplying , fixing and wiring rotary selector switch suitable for Ammeter SR item(yes/no) No Quantity 1 BuyBack Item --- Each Maximum Quantity --- Item Category --- No Item :363 en t Minimum Quantity Unit Item Code code363 Description Supplying , fixing and wiring 50/5 to 400/5 Amps 5 VA burden current Transformer .class 0.5 accuracy tape wound SR item(yes/no) No Quantity 6 BuyBack Item Each ur em Minimum Quantity Unit --- Maximum Quantity --- Item Category --- No Item :364 Item Code code364 Description Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter. SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Unit --- Each Maximum Quantity --- Item Category --- No Item :365 code365 Description Supplying & fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wring complete . Protection of Overload and Shortcircuit with thermal Magnetic / Microprocessed release and Earth Fault as per IS-13947 ( Icu=Ics ) A) 4 POLE 100Amps 25 KA SR item(yes/no) No Quantity 1 ro c Item Code --- ep Minimum Quantity BuyBack Item Unit Each Maximum Quantity --- Item Category --- No Item :366 Item Code code366 Description Supplying & fixing Moulded Case Circuit Breaker(MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wring complete . Protection of Overload and Shortcircuit with thermal Magnetic / Microprocessed release and Earth Fault as per IS-13947 118 of 135 ( Icu=Ics ) B) 3 POLE 63 Amps 25 KA No Quantity 1 Minimum Quantity BuyBack Item Unit --- Each Maximum Quantity --- Item Category --- No Item :367 en t SR item(yes/no) Item Code code367 Description Supplying & fixing miniature Circuit breakers on existing MCB distribution boards using necessary fixing materials and C-type curve,indicator ON/ OFF energy cross-3 with short circuit brreaking capacity of 10K and complete wiring as required to IEC 60898. A) 6-32 Amps SP SR item(yes/no) No Quantity 3 BuyBack Item Each ur em Minimum Quantity Unit --- Maximum Quantity --- Item Category --- No Item :368 Item Code code368 Description Supplying & fixing miniature Circuit breakers on existing MCB distribution boards using necessary fixing materials and C-type curve,indicator ON/ OFF energy cross-3 with short circuit brreaking capacity of 10K and complete wiring as required to IEC 60898. B) 50-63A,TPN,MCB SR item(yes/no) No Quantity 1 --- ro c Minimum Quantity Unit BuyBack Item Each Maximum Quantity --- Item Category --- No Item :369 code369 Description Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely. 20mm SR item(yes/no) No Quantity 5 ep Item Code Minimum Quantity BuyBack Item --- Unit Mtr Maximum Quantity --- Item Category --- No Item :370 Item Code code370 Description Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over 119 of 135 inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely. 25mm No Quantity 5 Minimum Quantity BuyBack Item Unit --- Mtr en t SR item(yes/no) Maximum Quantity --- Item Category --- No Item :371 code371 Description Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of the pipe terminated completely. 32mm SR item(yes/no) No Quantity 2 Minimum Quantity BuyBack Item Item :372 ur em Item Code Unit --- Mtr Maximum Quantity --- Item Category --- No code372 Description Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. a) 250 Amps 4 x 30 x 10 mm Aluminum strips . ro c Item Code SR item(yes/no) No Quantity 1.8 Minimum Quantity BuyBack Item --- Unit Mtr Maximum Quantity --- Item Category --- No Item :373 code373 ep Item Code Description Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. b) 100 Amps 4 x 30 x 6 mm Aluminum strips . 120 of 135 No Quantity 0.5 Minimum Quantity BuyBack Item Unit --- Mtr Maximum Quantity No Item :374 --- en t SR item(yes/no) Item Code code374 Description Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . a) 40 x 40 x 6 mm . SR item(yes/no) No Quantity 10 BuyBack Item Unit --- --- Mtr Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category No Item :375 Item Code code375 Description Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . b) 50 x 50 x6 mm . SR item(yes/no) No Quantity 10 Minimum Quantity BuyBack Item Unit --- Mtr Maximum Quantity --- Item Category --- No ro c Item :376 Item Code code376 Description Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . c) 75 x75 x 6 mm . SR item(yes/no) No Quantity 5 Minimum Quantity Mtr Maximum Quantity --- Item Category --- No ep BuyBack Item --- Unit Item :377 Item Code code377 Description Supplying and fixing angle iron frame work fabricated out of M.S angle iron .. And M.S.flat .. With bolts , washers etc., and painted with 2 coats of red oxide and then two coats of approved paint . d ) 50 x 100 x 50 x 6 mm C channel . SR item(yes/no) No Unit Mtr 121 of 135 3 Minimum Quantity BuyBack Item --- Maximum Quantity --- No Item :378 en t Quantity Item Code code378 Description Fabricating supplying and mounting MS box made out …SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. a) 14 SWG SR item(yes/no) No Quantity 22000 BuyBack Item Unit --- Sq CM ur em Minimum Quantity Item Category --- Maximum Quantity --- Item Category --- No Item :379 Item Code code379 Description Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required . 25 x 6 mm SR item(yes/no) No Quantity 2 Minimum Quantity --- Mtr Maximum Quantity --- Item Category --- No ro c BuyBack Item Unit Item :380 code380 Description Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 3.5 Core 240 Sq. mm (2 Runs from Transformer to Academic Block Electrical Room) SR item(yes/no) No ep Item Code Quantity Mtr 560 Minimum Quantity BuyBack Item Unit --- Maximum Quantity --- Item Category --- No Item :381 Item Code code381 Description Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, 122 of 135 SR item(yes/no) No Quantity 10 Minimum Quantity BuyBack Item Unit --- en t PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 3.5 Core 185 Sq. mm (From 125 KVA DG set to Academic Block Electrical Room) Mtr Maximum Quantity --- Item Category --- No Item :382 code382 Description Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 3.5 Core 150 Sq. mm (For ACA Sub Dist. Panel, Girl's and Boy's Hostel Panels) SR item(yes/no) No Quantity 20 Minimum Quantity BuyBack Item Item :383 ur em Item Code Unit --- Mtr Maximum Quantity --- Item Category --- No code383 Description Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 3.5 Core 120 Sq. mm (for Capacitor Panel) ro c Item Code SR item(yes/no) No Quantity 20 Minimum Quantity BuyBack Item --- Unit Mtr Maximum Quantity --- Item Category --- No Item :384 code384 Description Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 3.5 Core 50 Sq. mm (for Dining Hall and Common Service Panel) SR item(yes/no) No ep Item Code Unit Mtr 123 of 135 25 Minimum Quantity BuyBack Item --- Maximum Quantity --- No Item :385 en t Quantity Item Code code385 Description Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 3.5 Core 25 Sq. mm SR item(yes/no) No Quantity 50 BuyBack Item Item :386 Unit --- Mtr ur em Minimum Quantity Item Category --- Maximum Quantity --- Item Category --- No Item Code code386 Description Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 4 Core 16 Sq. mm SR item(yes/no) No Quantity 50 Minimum Quantity --- Mtr Maximum Quantity --- Item Category --- No ro c BuyBack Item Unit Item :387 Item Code code387 Description Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 6 sqmm to 16 sqmm SR item(yes/no) No Quantity 50 ep Minimum Quantity BuyBack Item --- Unit Mtr Maximum Quantity --- Item Category --- No Item :388 Item Code code388 Description Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 25 sqmm to 75 sqmm 124 of 135 No Quantity 110 Minimum Quantity BuyBack Item Unit --- Mtr Maximum Quantity No Item :389 --- en t SR item(yes/no) Item Code code389 Description Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 95 sqmm to 150 sqmm SR item(yes/no) No Quantity 120 BuyBack Item Item :390 Unit --- --- Mtr Maximum Quantity --- Item Category --- ur em Minimum Quantity Item Category No Item Code code390 Description Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. 185sqmm to 240 sqmm SR item(yes/no) No Quantity 90 Minimum Quantity BuyBack Item --- Mtr Maximum Quantity --- Item Category --- No ro c Item :391 Unit Item Code code391 Description Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) a. in soil - (ordinary) SR item(yes/no) No Quantity 12 Minimum Quantity Mtr Maximum Quantity --- Item Category --- No ep BuyBack Item --- Unit Item :392 Item Code code392 Description Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) b. in soil ( hard ) SR item(yes/no) No Quantity 20 Unit Mtr 125 of 135 Minimum Quantity Maximum Quantity --- No Item :393 en t BuyBack Item --- Item Code code393 Description Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) a. 19/20mm dia SR item(yes/no) No Quantity 30 Minimum Quantity BuyBack Item Item Category Unit --- Each Maximum Quantity No --- ur em Item :394 --- Item Code code394 Description Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) b. 25mm dia SR item(yes/no) No Quantity 40 Minimum Quantity BuyBack Item Item Category Unit --- --- Each Maximum Quantity --- Item Category --- No Item :395 code395 Description Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) c. 32 mm dia SR item(yes/no) No Quantity 10 ro c Item Code Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :396 code396 Description Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) d. 45mm dia SR item(yes/no) No Quantity 8 ep Item Code Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No Item :397 Item Code code397 126 of 135 Description Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) e. 50 mm dia SR item(yes/no) No Quantity 8 BuyBack Item --- Each en t Minimum Quantity Unit Maximum Quantity --- Item Category --- No Item :398 Item Code code398 Description Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) f. 63 mm dia SR item(yes/no) No Quantity 1 BuyBack Item Each ur em Minimum Quantity Unit --- Maximum Quantity --- Item Category --- No Item :399 Item Code code399 Description Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) g. 75 mm dia SR item(yes/no) No Quantity 2 Minimum Quantity BuyBack Item Unit --- Each Maximum Quantity --- Item Category --- No ro c Item :400 Item Code code400 Description Supply and fixing of heavy duty cable glands suitable for UG cables of 1.1 KV class ( metal only ) h. 100 mm dia SR item(yes/no) No Quantity 2 Minimum Quantity BuyBack Item --- Unit Each Maximum Quantity --- Item Category --- No ep Item :401 Item Code code401 Description Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm SR item(yes/no) No Quantity 30 Minimum Quantity Unit --- Maximum Each --127 of 135 Quantity BuyBack Item No Item :402 code402 Description Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 25 sqmm long barrel SR item(yes/no) No Quantity 20 Minimum Quantity BuyBack Item Item Category Unit --- --- en t Item Code Each Maximum Quantity No ur em Item :403 --- Item Code code403 Description Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 50 sqmm long barrel SR item(yes/no) No Quantity 10 Minimum Quantity BuyBack Item Item Category Unit --- --- Each Maximum Quantity --- Item Category --- No Item :404 Item Code code404 Description Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 70 sqmm long barrel SR item(yes/no) No Quantity 8 ro c Unit Minimum Quantity BuyBack Item --- Each Maximum Quantity --- Item Category --- No Item :405 code405 Description Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 120 sqmm long barrel SR item(yes/no) No ep Item Code Quantity Each 2 Minimum Quantity BuyBack Item Unit --- Maximum Quantity --- Item Category --- No Item :406 Item Code code406 Description Supplying tinned copper lugs and crimping and wiring to terminal point 128 of 135 for wire of the following sizes. 185 sqmm long barrel No Quantity 2 Minimum Quantity BuyBack Item Unit --- Each Maximum Quantity --- Item Category --- No Item :407 en t SR item(yes/no) Item Code code407 Description Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. a. 80 mm SR item(yes/no) No Quantity 10 Mtr ur em Minimum Quantity BuyBack Item Unit --- Maximum Quantity --- Item Category --- No Item :408 Item Code code408 Description Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. c. 65 mm SR item(yes/no) No Quantity 10 --- ro c Minimum Quantity Unit BuyBack Item Mtr Maximum Quantity --- Item Category --- No Item :409 code409 Description aSupplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. . 450 X 50 mm SR item(yes/no) No Quantity 2 ep Item Code Minimum Quantity BuyBack Item --- Unit m Maximum Quantity --- Item Category --- No Item :410 Item Code code410 Description bSupplying and fixing 2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding 129 of 135 as required. . 600 X 50 mm No Quantity 5 Minimum Quantity BuyBack Item Unit --- m Maximum Quantity --- Item Category --- en t SR item(yes/no) No Item :411 code411 Description Supplying, fixing and wiring of earth electrode for grounding of lifts, Transformers DG Sets etc, using 40mm dia 2.9 mm thick 2.5 meter long GI pipe with GI nnel with mesh & suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400 X 400 X 400 mm with a cast iron cover. The earth electrode shall have staggered holes of 12 mm dia and the electrode should be covered 150 mm alround with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using bolts and nuts. SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Item :412 ur em Item Code Unit --- Each Maximum Quantity --- Item Category --- No Item Code code412 Description Supplying and running of GI/Copper stripes for grounding connections, using necessary fixing materials as required a) 25 X 3 mm GI strip SR item(yes/no) No Quantity 12 ro c Unit Minimum Quantity BuyBack Item --- m Maximum Quantity --- Item Category --- No Item :413 code413 Description bSupplying and running of GI/Copper stripes for grounding connections, using necessary fixing materials as required ) 25 X 6 mm GI Strip SR item(yes/no) No Quantity 12 ep Item Code Minimum Quantity BuyBack Item --- Unit m Maximum Quantity --- Item Category --- No Item :414 Item Code code414 130 of 135 Description cSupplying and running of GI/Copper stripes for grounding connections, using necessary fixing materials as required . 40 X 6 mm SR item(yes/no) No Quantity 3 BuyBack Item --- m en t Minimum Quantity Unit Maximum Quantity --- Item Category --- No Item :415 Item Code code415 Description Supplying and running of GI/Copper stripes for grounding connections, using necessary fixing materials as required d. 600 x 600 x 3 mm GI plate SR item(yes/no) No Quantity 15 BuyBack Item Each ur em Minimum Quantity Unit --- Maximum Quantity --- Item Category --- No Item :416 Item Code code416 Description Supplying and running of Copper Strip GI/Copper stripes for grounding connections, using necessary fixing materials as required a. 25 X 3 mm SR item(yes/no) No Quantity 6 Minimum Quantity --- m Maximum Quantity --- Item Category --- No ro c BuyBack Item Unit Item :417 Item Code code417 Description Supplying and running of Copper Strip GI/Copper stripes for grounding connections, using necessary fixing materials as required a. b. 25 X 6 mm SR item(yes/no) No Quantity 6 --- ep Minimum Quantity BuyBack Item Unit m Maximum Quantity --- Item Category --- No Item :418 Item Code code418 Description Supplying and running of Copper Strip GI/Copper stripes for grounding connections, using necessary fixing materials as required a. c. 600 x 600 x 3 mm copper plate SR item(yes/no) No Unit Each 131 of 135 8 Minimum Quantity BuyBack Item --- Maximum Quantity --- No en t Quantity Item :419 code419 Description Design,supplying,erecting testing and commissioning of passenger / hospital lift with speed of 1.0 mtr per second,variable voltage,variable frequency drive,with or without machine room for the available well size,operating at 415v 3 phase 50 cycles AC supply,powdercoated or stainless steel car entrance door enclosures with flooring,car ilumination,emergency light,intercom and fan as desired bybthe user,central opening /side opening door or without attendeant operation,7 segment display,kids buttons,call register indicator,firmen drive,ss handrails inside car,full length infra red curain in car door,automtically rescue device,voice annouciation in regional languages,Braile buttons with one year warranty and mainatance.The worksincludes providing shaft scafolding,attending minor buiders workssuch as making nitches for fixing of brackets,guide rails,counter weights lift ruuning liecence from the competent authority. With machine room-SS finsih (8 passenger lift-4 stops) SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Item Category --- ur em Item Code Unit --- No Maximum Quantity --- Item Category --- No Item :420 code420 Description Supplying, erecting, testing & commissioning of ON-LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete.(9/9.3) 10 kVA ON LINE UPS(9/9.3.5) SR item(yes/no) No Quantity 5 ro c Item Code Minimum Quantity No Maximum Quantity --- Item Category --- No ep BuyBack Item --- Unit Item :421 Item Code code421 Description Supplying, installation, testing & commissioning of 12V ..AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type..(9/9.4) SR item(yes/no) No Quantity 10 Unit No 132 of 135 Minimum Quantity BuyBack Item --- Maximum Quantity --- No en t Item :422 code422 Description Supplying,erecting,testing & commissioning of 200.kVA Diesel Generator set on existing CC platform comprising of Diesel Engine developing … BHP @ 1500RPM confirming to BS 5514.The engine should be turbocharged, Air/water cooled with 10% over load for 1hour in every 12 hours of operation coupled to suitable capacity alternator rated at 415V , 0.8PF Lag 50Hz, 3Phase , 4wire system,confirming to BS 5000/IS 4722. The alternator shall be of brushlesstype, screen protected,revolving field,mounted on suitable channel iron base frame, complete with suitable capacity fuel tank,required nos. of batteries of 12/24V as per requirement , Acoustic enclosure as per CPCB approved norms. (10/10.1) 100KVA/80KW (10/10.1.9) SR item(yes/no) No Quantity 1 Minimum Quantity BuyBack Item Item Category --- ur em Item Code Unit --- Set Maximum Quantity --- Item Category --- No Item :423 code423 Description Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/ floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .....A 4 pole contactor for alternator with thermal O/L relay,..... A 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, ....capacity bypass switch and frequency sensing, PCC 1301controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ kVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMF module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules. 62.5KVA to 125 KVA (10.2.2) ep ro c Item Code SR item(yes/no) No Quantity 1 Minimum Quantity Unit --- Maximum Quantity Set --- 133 of 135 No en t BuyBack Item Contact Information Contact Person Name Lokesh Babu C G Office Telephone Number 08022273511 Mobile Number 8022273511 Amount Details --- Tender Fee (INR) 5000.00 ur em Estimated Contract Value Amount of Earnest Money Deposit(INR) 535000.00 Tender Pre Bid Meeting Details Date and Time Address City State PIN Code 10-04-2024 11:00:00 CAUVERY BHAVAN 3RD FLOOR Bengaluru Karnataka 560009 Tender Schedule 180 Last Date and Time for Tender Queries/Clarifications 08-04-2024 16:00:00 Last Date and Time for Receipt of Tenders 17-04-2024 16:00:00 ro c Bid Validity Period (In Days) 19-04-2024 16:00:00 ep Date and Time for Opening of Technical Bid 134 of 135 Tender Published User Details KPE11678 - LOKESHBABU C G Tender Published User Login KHB_EE2_CO_BNG Public Key CN=C G LOKESHBABU, O=HOUSING BOARD, OU=HOUSING BOARD, SERIALNUMBER=a225a8d83e4e3b95d123eecf59406 3962454adcce6a6ef2d8095b4e859f06a96, OID.2.5.4.65=908d076666ded1795e2118c458b74be b, STREET=CAVERY BHAVAN KG ROAD BENGALURU, OID.2.5.4.17=560009, OID.2.5.4.20=629f9470d218005e5821e51b56ce7f4 4d0ba20ae3e17ca675fde5b9017003af4, ST=Karnataka, C=IN ur em CN=Verasys Sub CA 2022, OID.2.5.4.51="Office No. 21, 2nd Floor, Bhavna Building", STREET=V.S. Marg, ST=Maharashtra, OID.2.5.4.17=400025, OU=Certifying Authority, O=Verasys Technologies Pvt Ltd., C=IN ep ro c Issuer en t Tender Published User Name 135 of 135