AOC4518R04v07
D08X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690-8x652x15.5i/2x17.5i/2x17.5i/2x18i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 960) (Lr1/Rr2)
Frequency range (MHz)
690 - 803
790 - 862
824 - 894
2 x (1695 - 2200) (Lb1/Rb2)
880 - 960
Polarization
1920 - 2200
2 x (2490 - 2690)
(Ly1/Ry4)
+45° , -45°
Electrical downtilt (°)
Gain (dBi)
1695 - 1990
2 - 14 , continuously adjustable, each band separately
2 - 11 , continuously adjustable, each band
separately
at mid Tilt
14.7
14.9
15.1
15.3
17.2
17.7
18.3
over all Tilts
14.7 ±0.6
14.9 ±0.5
15.1 ±0.5
15.3 ±0.6
17.2 ±0.7
17.7 ±0.7
18.3 ±0.6
Side lobe suppression for first side
lobe above main beam (dB)
> 15
> 16
> 16
> 15
> 15
> 15
> 15
Horizontal 3dB beam width (°)
70 ±7
69 ±6
68 ±6
66 ±6
70 ±7
65 ±6
58 ±6
Vertical 3dB beam width (°)
11.0 ±0.8
10.1 ±0.8
9.7 ±0.7
9.0 ±0.7
6.2 ±0.6
5.6 ±0.6
4.5 ±0.5
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 28
≥ 28
Interband isolation (dB)
≥ 27
≥ 27
Front to back ratio , ±30° (dB)
Cross polar ratio (dB)
0°
Max. effective power per port (W)
> 21
> 22
> 22
> 22
> 25
> 25
> 25
> 18
> 18
> 18
> 18
> 17
> 17
> 16
400 (at 50℃ ambient temperature)*
250 (at 50℃ ambient temperature)*
≤ -153 (2 x 43 dBm carrier)
≤ -153 (2 x 43 dBm carrier)
Intermodulation IM3 (dBc)
Impedance (Ω)
Grounding
50
50
DC Ground
DC Ground
Electrical Properties
2 x (1427 - 2690) (CLy2/CRy3)
Frequency range (MHz)
1427 - 1518
1695 - 1990
1920 - 2200
Polarization
2200 - 2490
2490 - 2690
+45° , -45°
Electrical downtilt (°)
2 - 12 , continuously adjustable, each band separately
at mid Tilt
15.5
17.0
17.3
17.5
17.8
over all Tilts
15.5 ±0.7
16.9 ±0.5
17.2 ±0.5
17.4 ±0.5
17.7 ±0.5
Side lobe suppression for first side
lobe above main beam (dB)
> 15
> 16
> 16
> 16
> 15
Horizontal 3dB beam width (°)
70 ±8
69 ±6
65 ±6
60 ±6
58 ±6
Vertical 3dB beam width (°)
8.9 ±0.6
7.1 ±0.6
6.4 ±0.6
5.7 ±0.5
5.2 ±0.4
Gain (dBi)
VSWR
< 1.5
< 1.5
Cross polar isolation (dB)
≥ 26
≥ 27
Interband isolation (dB)
≥ 26
≥ 27
Front to back ratio , ±30° (dB)
Cross polar ratio (dB)
0°
Max. effective power per port (W)
> 24
> 25
> 25
> 25
> 25
> 17
> 17
> 17
> 17
> 16
250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc)
≤ -153 (2 x 43 dBm carrier)
Impedance (Ω)
50
Grounding
DC Ground
* Max. effective power whole antenna: 1200 W (at 50℃ ambient temperature)
1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).
2. Electrical datasheet in XML format is available.
1
AOC4518R04v07
D08X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690-8x652x15.5i/2x17.5i/2x17.5i/2x18i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.0m
Mechanical Properties
2009 x 469 x 206
Packing dimensions (H x W x D) (mm)
2265 x 555 x 255
Antenna weight (kg)
37.5
Clamps weight (kg)
6.3 (2 units)
53.5 (Included clamps)
Mast diameter supported (mm)
50 - 115
Radome material
GFRPP*
Radome colour
Light grey
Operational temperature (℃)
-40 .. +65
1383
Antenna packing weight (kg)
Frontal:
605 (at 150 km/h)
Lateral:
370 (at 150 km/h)
Maximum: 800 (at 150 km/h)
Wind load (N)
Max. operational wind speed (km/h)
200
Survival wind speed (km/h)
250
16 x 4.3-10 Female
Connector position
59
Connector
Bottom
Unit: mm
*GFRPP: Glass Fiber Reinforced Polypropylene
Accessories
Item
Model
Description
Weight
Units per antenna
Downtilt kit
ASMDT0H01
Mechanical downtilt: 0 - 12 °
3.1 kg
1 (Separate packing)
Pattern sample for reference
690 - 960 MHz
(Lr1/Rr2)
1427 - 2690 MHz
(CLy2/CRy3)
1695 - 2200 MHz
(Lb1/Rb2)
2
2490 - 2690 MHz
(Ly1/Ry4)
2009
Antenna dimensions (H x W x D) (mm)
(567)
106
AOC4518R04v07
D08X-2x690-960/2x1427-2690/2x1695-2200/2x2490-2690-8x652x15.5i/2x17.5i/2x17.5i/2x18i-8xM-R
EasyRET 2L6H 16-Port Antenna with 8 Integrated RCUs - 2.0m
Antenna Information Management Module (AIMM) Specifications
Properties
RET type
Integrated RET
RET protocols*
AISG 2.0 / 3GPP
Input voltage range (V)
10 - 30 DC
Power consumption (W)
< 0.5 (when the motor does not work, 12 V)
< 4.5 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s)
Typ. 40 (typically, depending on antenna type)
RET connector
4 x 8 pin connector according to IEC 60130-9
Daisy chain in: Male / Daisy chain out: Female
Pin assignment according AISG
1
2
3
4
5
6
7
8
DC
n/c
RS-485B
n/c
RS-485A
DC
DC return
n/c
2.5 (10/350 μs)
10 (8/20 μs)
Lightning protection (kA)
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna
software interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol
switching function, contact Huawei before system installation.
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
Integrated RET S/N:
c
d
e
a HWxxxx……….Lr1
b HWxxxx………Lb1
b
f
c HWxxxx………Ly1
y4
y1
d HWxxxx…...CLy2
e HWxxxx……..Ry4
h
f HWxxxx……..Rb2
b1
y2
y3
r1
r2
g
a
b2
g HWxxxx………Rr2
h HWxxxx……CRy3
r - Red
L - Left array
y - Yellow
C - Center array
b- Blue
R - Right array
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements
described in the antenna installation guide.
5. In the effort to improve our products, all specifications are subject to change without notice.
Huawei Technologies Co., Ltd.
Bantian, Longgang District, Shenzhen 518129, P.R.China
3
www.huawei.com/antenna
Issue: 2020-11-27