1 COORDINATE MEASURING MACHINE Standard CNC CMM Microcord CRYSTA-Apex S500/700/900 Series CRYSTA-Apex S 776 The CRYSTA-Apex S500/700/900 series, CNC CMMs attain high accuracy (1.7µm), high speed, and high acceleration. This series offers flexibility with a wide variety of models for various workpiece sizes. Model CRYSTA-Apex S 776 Items Measuring range X axis 700mm Y axis 700mm Z axis 600mm Maximum measuring speed 8mm/s Each axis 8 to 300mm/s (CNC Mode) Maximum combined speed 519mm/s Drive Speed 0 to 80mm/s (J/S Mode : High Speed) 0 to 3mm/s (J/S Mode : Low Speed) 0.05mm/s (J/S Mode : Fine Speed) Each axis 1333mm/s² Maximum acceleration Model CRYSTA-Apex S 544 X axis Measuring range Y axis S 574 400mm Z axis 0.0001mm (0.1µm) Guide method Air bearings on each axis Accuracy (Using SP25M Probe) 1.7+3L/1000 (Temperature environment 1) S 776 500mm Maximum combined speed 2309mm/s² Resolution S 7106 S 9106 /9108 S 9166 /9168 700mm 700mm 400mm 700mm S 9206 /9208 900mm 1000mm 1000mm 1600mm 600mm 2000mm 600mm/800mm Also available : CRYSTA-Apex S1200/1600/2000 Series • The CRYSTA-Apex S1200/1600/2000 Series are large-sized CNC CMMsdeveloped for supporting quality evaluation of large parts • Measuring range up to : X 2000mm, Y 4000mm, Z 1600mm • Accuracy start from 2.3µm (S 1200 series with SP25M probe) Software for Coordinate Measuring machines MCOSMOS GEOPAK CAT1000P CAT1000S SCANPAK MCOSMOS-1 O - - MCOSMOS-2 O O O - MCOSMOS-3 O O O O CAT1000P (On-/Off-line teaching program) GEOPAK (General purpose measurement program) 2 COORDINATE MEASURING MACHINE Manual Type CMM Microcord CRYSTA-Plus M Series CRYSTA-Plus M574 Manual Floating type CMMs developed in quest for high-accuracy, low-cost and easy operation. The Crysta-Plus M is suitable to measurea wide range of applications from a simple dimension to complex form Model CRYSTA-Plus M574 Items Measuring range X axis 500mm Y axis 700mm Z axis 400mm Resolution 0.0005mm (0.5µm) Guide method Air bearings on each axis Clamping of each axis One-touch air clamp Fine feed of each axis Continuous fine feed over the entire measuring range Accuracy*¹ at 20°C E = (3.5+4L/1000) µm High Accuracy CNC CMM Microcord STRATO-Apex 500/700/900/1600 Series STRATO-Apex 776 Accuracy start from (0.7+2.5L/1000)µm (S574 with SP25M Probe) In-line Type CNC CMM MACH-3A 653 MACH-V 9106 MACH Ko-ga-me Stand (Option) UltraHigh Accuracy CNC CMM Microcord LEGEX Series LEGEX 774 Accuracy (0.28+L/1000)µm (with MPP310Q probe) 3 COORDINATE MEASURING MACHINE Optional Accessories Optional Probe : SP25M Scanning Probe TP200 Compact high-accuracy touch-trigger probe PH10M/10MQ Motorized probe head Surface Measure606 Non-contact type laser probe QVP Quick Vision Probe MH20i Manual probe head Clamping System : Probe for rougness measurement Automatic measurement program generation software MiCAT Planner Eco-Fix Kit S A kit includes a 250mm x 250mm base plate and a variety of clamping components. Part-programming time Reduced by up to 95% !! Guarantee a dramatically reduced development phase and at the same time improve product quality. Eco-Fix Kit L A kit includes a 500mm x 400mm base plate and a variety of clamping components. 4 • One-click programing that changes the relationship between people and precision measurement • Indentifies tolerance information included in 3D models with Product and Manufacturing Information (PMI), defines measurement locations and creates a measurement program fully automatically OPTICAL MEASURING PJ-A3010F-200 Profile Projectors PJ-A3000 series Each model has a digital counter and digital readout protactor screen to facilitate dimensional and angular measurement. Optional Accessories QM-Data200 Data Processing unit OPT (Optoeye) Model PJ-A3005D-50 PJ-A3010F-100 Projected image Projection lens PF-A3005F-150 PJ-A3010F-200 Inverted-reversed 10X (standard accessory), 20X, 50X, 100X Magnification 10X, 20X (equipped with an external half-mirror for coaxial surface illumination) Lens mount Measuring range (XxY) Bayonet mount 50x50mm 100x100mm 150x50mm PJ-H30 Series PH-3515F • Best in class accuracy. • Bright 306mm diameter screen. • Unique head drive focusing. • Turret lens mounting. • Floating XY workstage. • Bright 353mm diameter sceens. • Floating-type workstage. • Digital angle measurement counter. • Fiber-optic surface illumination. 200x100mm PV-5110 PH-A14 • Bright large 500mm angled sceen. • Digital angle measurement counter. • Oblique surface illumination. • Bench-top model uses a horizontal optical system. • Maximum loading of workstage (45kg) allows the measurement of heavy workpieces. 5 OPTICAL MEASURING MF-B2017D MF Series Measuring Microscopes Observation with a clear and flareless erect image along with a wide field of view Measuring accuracy : (2.2+0.02L)µm – complies with JIS B7153 method Quick-release mechanism High-magnification up to 2000x (standard 30x) Optional : Vision Unit Other model : MF-U Series Universal Measuring Microscope Without Z-axis scale Model No. MF-A1010D MF-A2010D MF-A2017D MF-A3017D MF-A4020D With Z-axis scale Model No. MF-B1010D MF-B2010D MF-B2017D MF-B3017D MF-B4020D 100x100mm 2000x100mm 200x170mm 300x170mm 400x200mm Measurement range TM Series Toolmakers’ Microscopes TM-505B Compact universal toolmakers’ microscope that can be installed on any site Model TM-505B Optical tube Monocular type (Vertical tilt angle: 60°) Observation image Erect Eyepiece Standard accessory: 15X, Options: 10X, 20X Objective lens Standard accessory: 2X, Options: 5X, 10X Measuring range 50x50mm Linear measurement method Micrometer head (optional) Applications: PCB 6 HDD suspension IC package Electric parts VISION MEASURING SYSTEMS QV Apex302 QV Apex CNC Vision Measuring System The Quick Vision series of CNC vision measuring machines are equipped with CCD cameras eliminating the need for visual alignment with a measuring microscope of projector. Automatic measuring can be easily achieved for electronic components, press molded products, resin molded products, etc. Model QV Apex 302 QV Apex 404 QV Apex 606 Measuring range (XxYxZ) 300x200x200mm 400x400x250mm 600x650x250mm Resolution of scale / Scale type 0.1µm/Linear Encoder B&W CCD (PRO) Imaging Device Accuracy QV Active CNC Vision Measuring System 3CCD Color (PRO3) E1X, E1Y (1.5+3L/1000)µm E1Z (1.5+4L/1000)µm E2XY (2+4L/1000)µm Tracking Auto Focus device Only PRO3 series QV-L202Z1L-D • Space-saving new entry model, meet various needs with advanced functionality and easy operation • Equipped with High-resolution color camera • A Model is also available equipped with a touch probe that can be used for measuring three-dimensional objects that cannot be measured with a purely vision-based measuring system. Touch probe equipped models Model QV-L202Z1L-D QVT1-L202Z1L-D Measuring range (X x Y x Z) “250x200x150 (250x200x118: when Z Objective 1X is used)” QV-L404Z1L-D “400x400x200 (400x400x168: when Z Objective 1X is used)” Resolution 0.1µm Scale unit Linear encoder Color CMOS camera Accracy QVT1-L404Z1L-D Yes E1X, E1Y (2+3L/1000)µm E1Z (3+5L/1000)µm E2XY (2.5+4L/1000)µm Accuracy guaranteed with optics specified Touch-probe measuring accuracy E1X, E1Y, E1Z Z-objective 1.5X and 3.5X Zoom ratio - (2.4+3L/1000)µm - (2.4+3L/1000)µm 7 VISION MEASURING SYSTEMS QS250Z QS250Z CNC Vision Measuring System CNC vision measuring machine equipped with a color CCD Camera Model No. QS250Z Drive method X-, Y-, Z-axis: CNC Total magnification*1 26X to 180X (8 steps) Measuring range 200x250x100mm Resolution 0.1µm Image detection method Color CCD Camera Measuring accuracy*2 Also available measuring range : (XxYxZ) 200x100x150mm 400x200x150mm E1X, E1Y (2.5+6L/1000)µm E1Z (5+6L/1000)µm QSL Series This is a manual vision measuring machine equipped with a color CMOS camera. Model No. Drive method Total magnification*1 Measuring range Resolution Image detection method E1X, E1Y Measuring accuracy*2 E1Z Also available measuring range : (XxYxZ) 100x100mm 200x100mm 200x170mm 400x200mm QS-L3017Z/AFB Autofocus equipped, X-, Y-axis manual, Zaxis: motor-operated 26X to 180X (8 steps) 300x170x100mm 0.1µm Color CCD Camera (2.5+20L/1000)µm (5+6L/1000)µm QI Series A series of 2D vision measuring machines that offers high-efficiency measurement with a double telecentric optical system. QI-A models offer wide field of view (32×24mm). QI-B series (12.8x9.6mm) can offer easy dimensional measurement of micro-workpieces and workpieces with uneven surfaces. Model No. Measuring accuracy QI-A3017C View field 32x24mm Measuring range (XxY) 300x170mm Within screen High resolution mode: ±2µm / Normal mode: ±4µm Repeatability within screen (±2σ) High resolution mode: ±1µm / Normal mode: ±2µm E1XY ±(3.5+0.02L)µm Optional accessorires Opti-fix Kit The opti-fix system allows the quick and safe solution of very different tasks using only a few components. In case of measuring methods using reflected as well as transmitted light for measurement of cubic, rotationally symmetrical and especially flat workpieces, the use of opti-fix is a really practical solution. 8 FORM MEASUREMENT Surface Roughness Tester SJ-210 Series SJ-310 Series On-site Surface Roughness Tester On-site Surface Roughness Tester Model SJ-210 X- axis Measuring range Detector Range Range/ Resolution Measuring speed Measuring force/Stylus tip shape Applicable standards Assessed profile Parameter Cutoff value λc λs SJ-310 16.0 mm 360 µm (-200 µm + 160 µm) 360 µm / 0.02 µm, 100 µm / 0.006 µm, 25 µm / 0.002 µm When measuring: 0.25 mm/s, 0.5 mm/s, 0.75 mm/s When returning: 1mm/s 0.75 Mn/60º, 2 µmR JIS 1982/ JIS 1994/ JIS 2001/ ISO 1997/ ANSI/ VDA Primary profile, Primary profile, Roughness profile, Roughness profile, DF profile, Rough- DF profile, Roughness motif profile ness motif profile, Waviness motif profile Ra, Rc, Ry, Rz,Rq, Ra, Rc, Ry, Rz,Rq, Rt, Rmax, Rp, Rv, Rt, Rmax, Rp, Rv, R3z,Rsk, Rku, Rc, R3z,Rsk, Rku, Rc, Rpc, Rsm, Rz1max, Rpc, Rsm, Rz1max, S, HSC, RzJIS, Rppi, S, HSC, RzJIS, Rppi, RΔa, RΔq, Rlr, Rmr, RΔa, RΔq, Rlr, Rmr, Rmr(c), Rδc, Rk, Rpk, Rmr(c), Rδc, Rk, Rvk, Mr1, Mr2, A1, Rpk, Rvk, Mr1, A2, Vo, Rpm, tp, Htp, Mr2, A1, A2, Vo, R, Rx, AR, Possible λa, λq, Lo, Rpm, tp, Customize Htp, R, Rx, AR, W, Wx, Wte, Possible Customize 0.08, 0.25, 0.8, 2.5 mm 2.5, 8 µm SV-2100 series Dedicated Control Unit Type Surface Roughness Tester High precision and high performance type surface roughness tester with a dedicated control unit, achieving user-friendly display and simple operation. SJ-410 Series SV-3200 series Compact Surface Roughness Tester Dekstop Surface Roughness Tester • Skidded and skidless measurement are switchable • Achieves the performance of a dekstop type in combination with the simplified stand and associated optional accessories • Equipped to measure a variety of parameters. • A precision surface rouhness tester supported by a wide range of optional accessories for a vesatile benchtop surface-analysis solution Optional Accessories : 178-039 Simplified Stand 9 FORM MEASUREMENT Contour Measuring Instrument Contracer CV-2100 Series Contour Measuring Instrument Contracer CV-3200 Series Contour Measuring Instrument Contour Measuring System enabling measurement that is fast, accurate, and easy • High-Precision Contour Measuring Instrument • Equipped with a high-precision arc scale and newly designed arm on the Z1 axis (detector) Optional Accessories : Model No. CV-2100M4 CV-3200S4 X-axis 100mm 100mm Z1-axis (detector unit) 50mm 60mm Z2-axis (column) travel range 350mm 300mm X-axis inclination angle ±45° ±45° 0.05µm Measurement range Resolution “Accuracy (20°C)” X-axis 0.1µm Z1-axis 0.1µm 0.04µm X-axis ±(2.5+0.02L) µm ±(0.8+0.01L) µm Z1-axis ±(2.5+|0.1H|) µm ±(1.4+|2H|/100) µm 218-003 Rotary Vise 218-001 Cross-travel table Roundtest RA-1600 Roundness/Cylindricity Measuring System The measurement results are shown graphically using the roundness / cylindricity analysis software (ROUNDPAK) Contracer CV-4500 Series Contour Measuring Instrument • Continous measurement in the vertical direction (up/down) with a double-sided conical stylus. • The measuring force can be set in the FORMTRACEPAK software Downward (Bottom plane measurement Upward (Top plane) measurement Upward/downward measurement direction is switchable on the software Measuring direction Model No. “Rotational accuracy (JIS B 7451-1997)” Turnable 10 RA-1600 Radial direction (0.02+6H/10000) µm Axial direction (0.02+6X/10000) µm Maximum probing diameter ø280mm Maximum workpiece diameter ø560mm Centering/leveling mechanism D.A.T Maximum Probing height 300mm X-axis travel range 165mm HARDNESS TESTING MACHINES HM-200 Series Micro Vickers Hardness Testing Machines HM-210D/220A • Introduction of electromagnetic force generation into the loading mechanism. The latest electromagnetic force motor used in the loading mechanism enables the test force to be freely selected (see test force specifications) over the wide range of 0.4903mN to 19610mN. It is also possible to freely set the loading time and duration time. • Newly-designed optical system. The new HM Plan series objective lenses are optimized for measuring characteristic indentation images. The lineup includes 6 types of long working distance objectives: 10X, 20X, 50X and 100X for measuring indentation images, and 2X and 5X for enabling widerange measurement around indentations. Model Applicable standards Test Force (gf) HM-210 10 200 20 300 30 500 HM-220 50 1000 100 - 0,05 20 JIS B 7725, ISO 6507-2 0,1 0,2 0,3 30 50 100 0,5 200 1 300 2 500 3 1000 5 2000 10 - Available Systems : System A System B System C System D Functions Focusing Manual Manual Manual Auto Testing action Single point Single point Programmed multi-point Programmed multi-point Test-point positioning Manual XY stage Manual XY stage Motorized XY stage Motorized XY stage Measuring indentations Measuring microscope Automatic (AVPAK-10/20) Automatic (AVPAK-10/20) Automatic (AVPAK-10/20) Camera Monochrome, 300,000 pixels Color, 3 million pixels Color, 3 million pixels Color, 3 million pixels Operating the main unit Touch Panel PC (AVPAK-10/20) PC (AVPAK-10/20) PC (AVPAK-10/20) HV-100 Series Vickers Hardness Testing Machines HV-110A/120A • Vickers hardness tester have a wide application in testing metals, especially small heat-treated parts, etc. • Four system available : System A, Basic model with touch panel operation System B, equipped with automatic indentation reading function System C, equipped with automatic indentation reading function and automatic XY stage System D, equipped with automatic indentation reading function and automatic XY stage, and autofocus stage Model HV-110 HV-120 Applicable standards Test Force (kgf) JIS B 7725, ISO 6507-2 1 2 3 5 0,3 0,5 1 2,5 10 20 30 50 5 10 20 30 Optional Accessories HV-110A/120A Touch Panel Standard Vice 11 HARDNESS TESTING MACHINES HR-100/200/300/400 Series Rockwell Hardness Testing Machines This series is economy type Rockwell hardness testing machines. HR-210MR HR-320MS HR-430MR/MS Model HR-210 MR HR-320MS HR-430MR HR-430MS Rockwell hardness Supported hardnesses Preliminary test force (N) Superficial Test force (N) Rockwell Standard 98.07 - Rockwell Superficial hardness 29.42 98.07 Rockwell Superficial hardness 98.07 147.1 294.2 441.3 29.42 98.07 147.1 294.2 441.3 - 588.4 980.7 1471 JIS B 7726 ISO 6508-2 (ASTM E18) WiZhard HR-500 Series Rockwell Hardness Testing Machines • With HR-500, the hardness of even the inside wall of a pipe-shaped specimen can be tested without cutting the specimen in half. • HR-500 can perform 3 types of hardness tests, not only Rockwell and Rockwell Superficial but also Brinell HR-522 The nose-type indenter allows internal measurement of pipe samples as well as the top surface of a flat sample HR-523 Model Type of hardness test Standards Preliminary test force (N) Total test force (N) Superficial Rockwell 588.4 980.7 1471 61.29 98.07 153.2 245.2 294.2 306.5 612.9 980.7 1226 1839 Auto (load, duration, unload) Manual (automatic brake and automatic load sequence) Brinell Test force control Preliminary test force (handling support) HARDMATIC HH-411 Rebound Type Portable Hardness Tester HR-522 Rockwell harness/Rockwell Superficial hardness/Brinell hardness JIS B 7726 ISO 6508-2 (ASTM E18) 29.42 98.07 147.1 294.2 441.3 HARDMATIC HH-300 Durometers for Sponge, Rubber, and Plastics This Portable hadrness tester is best suited for on-site hardness tests such as large molds, railroad track, and welded spots in structures. Model Detector Hardness display range HH-411 Impact hammer with integrated detector and carbide-ball tip Leeb hardness: 1 to 999HL Vickers hardness: 43 to 950HV Brinell hardness: 20 to 894HB “Display range Rockwell hardness (C scale): (This display 19.3 to 68.2HRC range varies Rockwell hardness (B scale): depending on 13.5 to 101.7HRB the conversion Shore hardness: 13.2 to 99.3HS table used.)” Tensile Strength: 499 to 1996MPa 12 Analog type Digital type Classification Type E Measurement target Soft rubber, sponge, General rubber, soft Hard rubber, hard felt, hard film plastic plastic, ebonite Type A Type D OTHERS MEASURING SYSTEMS QM-Height Linear Height Application : Height measurement, inside /outside diameters, straighness, etc. Model QMH-14” QMH-24” Measuring range (stroke) “0-450mm (350mm)” “0-715mm (600mm)” Measuring range 0 - 977mm Resolution (selectable) “0.001mm/ 0.005mm” “0.001mm/ 0.005mm” Slider stroke 600mm Resolution (selectable) 0.0001 / 0.001 / 0.01 / 0.1mm Accuracy at 20°C (1.1+0.6L/600) µm Accuracy at 20°C Model ± (2.4+2.1L/600) µm LH-600 Linear Scale AT-715 series KA-200 Counter KA-213 The KA-200 Counter has a lathe function, as well as standard functions Compact, light and multifunctional. Model Model Number of axes to be displayed “Operating temperature / humidity range” KA-212 KA-213 2 axes 3 axes “0 to 45°C / 20 to 80% (Operational environment) -10 to 60°C / 20 to 80% (storage environment)” Laser Scan Micrometer LSM-902/6900 ABS AT715 Detection method Electromagnetic induction Minimum resolution 0.001mm to 0.01mm Effective range 100 to 3000mm Accuracy at 20°C “±5µm (Lo: 100 to 500mm) ±7µm (Lo: 600 to 1800mm) ±10µm (Lo: 2000 to 3000mm)” Protection level IP67 Litematic VL-50-B The Litematic is designed for measuring easily-deformed workpieces and high precision parts, with extra-low measuring force of 0.01N. Non-contact laser-based measuring system, mainly for outside diameter measurement. Model Measuring range Repeatability Model VL-50-B Measuring range 0 to 50mm 0.01 to 10µm resolution 0.01/0.1/1.0µm ±0.05µm Accuracy (20°C) (0.5+L/100)µm 0.01N or 0.15N or 1N 0.1 to 25mm Resolution Accuracy (20°C) LSM-902/6900 Whole range ±0.5µm Measuring force* Small range ±(0.3+0.1ΔD)µm *(factory-installed option) 13 CALIBRATION EQUIPMENT i-Checker The i-Checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads. Model i-Cheker Measuring range 100mm Resolution 0.02µm Repeatability ±0.05µm ±(0.2+L/100)µm in vertical position Accuracy (20°C) ±(0.3+2L/100)µm in lateral position Gauge Block Comparator Manual comparator with dual gage heads Model GBCD-250 Measuring range 0.1 - 250mm Resolution 0.00001mm (0.01µm) Accuracy ±(0.03+0.3L/100)µm Universal Length Measuring System DMS 680 – Gage Calibration For periodic inspection of gauges, reference gauges, masters and different gauges including : - plug gauges - ring gauges - thread plug gauges - thread ring gauges - gauge blocks - snap gauges - external micrometers - internal micrometers - bore gauges - dial indicators and electronic probes Model Measuring range 100mm differential (external) 680mm “Uncertainty (U95) in the absolute range” 14 DMS 680 absolute (0.18+L/1200)µm PORTABLE CMM ROMER Absolute Arm with Integrated Scanner LEICA Laser Tracker Systems The ROMER Absolute Arm with Integrated Scanner RS4 is an all-purpose portable measuring arm system designed to meet the needs of almost any measurement application, whether scanning or touch-probing. The Leica Absolute Tracker AT403 is a portable coordinate measuring machine that allows extreme accuracy over ultra large distances. Applications : Leica Absolute Tracker AT403 Hidden point measurement using B-Probe Laser scanning for inspection and reverse engineering solution System Configurations : Large object measurement Portable 3D probing (GD&T measurement) Model AT402 Reflector B probe Measurement volume (ø) 320m 20m Uxyz Coordinate Uncertainty +/- 15 μm + 6 μm/m +/- 0.2mm Leica Absolute Tracker AT960 6 Axis probing 7 Axis with Integrated 7 Axis with External 6 Axis with Laser scanner (SI) Laser scanner (SE) Tube probe Type RA 7325SI (2.5m)* Single point repeatabilty 0.049 mm 0.027 mm Volumetric accuracy ± 0.069 mm ± 0.038 mm Scanning system accuracy (RS4) 0.084 mm 0.063 mm Point acquisition rate Arm Weight The only Laser tracker with unique ‘4 in 1’ Solution RA 7525SI (2.5m)* Ultra-large volume with Reflector 752,000 pts/sec 8.6 kg 8.9 kg *more sizes are also available Probing with T-Probe AICON 3D Scanner Scanning with HP-L20.8 Laser Scanner and Leica T-Scan 5 Robotic Guidance & Inspection AICON PrimeScan AICON StereoScan neo 15 KAWAN LAMA CALIBRATION LABORATORY The calibration is a process to determine the measurement accuracy value on a conventional measuring instrument by comparing the measurement results with national and international measurement standards. The benefits are to make sure the measuring instrument is in good condition, brings an accurate measurement and ready for use. Since January 2004, PT Kawan Lama Sejahtera Calibration Laboratory provides calibration services for various measuring instruments. Accredited by Komite Akreditasi Nasional (KAN) LK-066-IND, calibration quality at Kawan Lama Calibration Laboratory is guaranteed and will be done in Accurate, Fast, and Right. • gauge block • profile projector • microscope • thickness gauge • pin/plug gages, setting/ring gages • plug (ring) thread gage FORCE • push pull gauge TORQUE WRENCH • torque and screwdriver wrench TEMPERATURE • torque wrench MASS • balance/weighing unit HARDNESS • rockwell (HRB, HRC) • rockwell superficial (HR30T, HR30N) • rubber hardness (shore) CALIBRATION TRAINING a. Training purpose • Perform calibrations of measuring instruments according to methods and procedures on rightly and accurately way. • Eliminates measurement uncertainties in reporting calibration results. • Applying calibration based on production needs. b. Required for? This training is required for QA / QC personnel, test engineers, supervisors, and production managers. It’s also beneficial for machine operators in the production process, and employees who do the production design. 16 Download our app! Accurate : The calibration process is done punctiliously and accurate to ensure the best results. Fast : The calibration process is done in a fast time. Right : The calibration process uses the best standard calibration method that can meet the needs. Kawan Lama Calibration Laboratory offers a calibration services ranging from check and maintenance service to identify the condition of measuring instrument, and repair service if there is damage. We also provide spare part provision service if part replacement is needed and calibration contract service which manages the calibration schedule of the measuring instrument regularly to provide the best performance. c. The trainers The trainers are senior experienced laboratory instructors in the field of dimensional calibration (Mitutoyo), force (IMADA), torque (FACOM) and hardness (Mitutoyo). They also have calibration certification from trusted national and international institutions, as well as a permanent instructor in calibration laboratory accredited by KAN (ISO 17025). d. Training methods and facility The training methods of the calibration are based on JIS (Japan Industrial Standard), and ASTM (American Society for Testing and Materials) so that it can be directly applied to various industrial fields. The training location is in Jakarta and will be implemented at a real calibration laboratory. Participants will be provided with training module, samples of calibration record and calibration results. BONTANG Tel. : 0811 581 4591 CIKARANG Tel. : (021) 8984-5858 CILEGON Tel. : (0254) 387-987 LAMPUNG Tel. : (0721) 474-480 MALANG Tel. : (0341) 321-328 MEDAN Tel. : (061) 452-7269 PALEMBANG Tel. : (0711) 351-198 PEKANBARU Tel. : (0761) 282-98 SAMARINDA Tel. : (0541) 410-0637 SEMARANG Tel. : (024) 355-8788 SURABAYA (Juanda) Tel. : (031) 868-8328 TANJUNG MORAWA Tel. : (061) 794-1328 YOGYAKARTA Tel. : (0274) 642-9098 Kawan Lama Industria l Solution Balikpapan Tel. : (0542) 870-3946 kls/p&a.456/5k/mt.maj/nin.gram/01.18 DIMENSION/LENGTH • caliper • micrometer • height gauge • bore gauge • dial indicator • dial test indicator
0
advertisement
Related documents
Download
advertisement
Add this document to collection(s)
You can add this document to your study collection(s)
Sign in Available only to authorized usersAdd this document to saved
You can add this document to your saved list
Sign in Available only to authorized users