INTERNSHIP PLAN
I.
INTRODUCTION:
During the internship program, the student interns are assigned to different areas
and venues, while in the Host Training Establishments (HTEs), the student interns
are given actual work experience in various departments that maybe determined
and mutually agreed upon by the school, HTE or the student intern.
II.
GOALS/OBJECTIVES:
The exposure to the different work situations is provided to enable the student intern
experience and observe the practical application of theories learned in the school.
At the end of the internship program, the student should be able to:
1. Identify key positions in the industry and related operations to their
corresponding tasks and responsibilities;
2. Define the standard operational procedure in each of the department assigned;
3. Identify and operate the equipment, facilities and layout design in each of the
department assigned
4. Perform required skills and techniques necessary in the execution of
operational procedures of the assigned tasks in accordance with the existing
workplace, health and safety standards; and
5. Analyze and evaluate operational procedure in each assigned task and
recommend any appropriate course of action to be taken to improve
procedures.
III.
REQUIREMENTS OF THE PROGRAM
A. List of documents for the student internship as stipulated in the CMO
Students
1. Birth Certificate
2. Evaluation Checklist
3. Medical Certificate
4. Notarized Parent’s/Guardian’s Consent
5. Training Contract
6. Certificate of Insurance Coverage
7. Official Registration Form
HTEs & HEIs
1. Memorandum of Agreement
2. Internship Plan
3. Certificate that the venue/site is inspected and found safe
B. Orientation and Briefing
After the application period, orientation and pre-internship seminars shall be set.
Training expectations, guidelines, rules and regulations, course requirements shall
be discussed. An open forum provides a venue for clarification on certain issues.
The speakers from the Host Training Establishment (HTE) maybe invited to share
their insights, expectations and experiences.
C. Internship Contract
An internship contract is signed by the student intern, the Higher Education
Institution (HEI) and the Host Training Establishment (HTE). This agreement
identifies the student intern’s tasks and some policies regarding the program.
D. Performance
The culmination of the internship program is the evaluation of the student intern
performance. The evaluation should contain the following:
Name of Student Intern:_KAREN L. MERCENE
_
Name of the HTE and address: GT -ISTRUKTURA CORP. /#6 LT. L. WOOD
ST., ADMIRAL VILLAGE, DOLORES, TAYTAY, RIZAL
_
Internship Period: Start: APRIL 14, 2023
End: JUNE 9, 2023
Department/Tasks
➢ Familiarization of
plan
➢ Familiarization of
construction
materials and
methods
➢ Estimation
➢ Site visitation
(The Westin
Sonata Residence)
➢ Preparation of the
bamboos to be
used in ceiling
finish of Shang
Wack Wack
Residence and
board up to be
used in Street
Escape in ShangriLa Plaza
➢ Preparation in
Bamboo treatment
➢ Estimation
Period
April
14-15,
2023
April
17-22,
2023
April
24-29,
2023
May 27, 2023
Student Outcomes
✓ Learned how to
identify different
elements of plan (US
Standard)
✓ Have a detailed and
comprehensive
knowledge of
construction and
construction method
✓ Can read and interpret
blueprints, drawing and
specification
✓ Learned some special
finishes of wall and
ceiling
✓ Acquired knowledge of
the bamboo's curing
procedures to extend
their lifespan.
✓ Learned how to provide
a detailed description of
the project and the costs
involved to it.
Ratings
Signature of
Supervisor/
Mentor
➢ On-Site
demolition (Wine
Storey in ShangriLa Plaza)
➢ Bamboo treatment
➢ Estimation
➢ On-Site
(Imperium)
➢ Estimation
➢ On-Site (Wine
Storey and Shang
Wack Wack
Residence)
➢ Estimation
➢ Making OJT
Report
✓ Learned the process on
how to treat the
bamboos so that it can
last longer.
✓ Know strategic
planning and
May 8implementation is in
14,
order to undertake the
2023
demolition project in a
safe and efficient
manner.
✓ Learned how to make
bamboo last longer so
May
that it won’t rot right
15-20,
away and can be
2023
utilized for other
purposes.
✓ Learned how to punch
listing (paint finishes),
May
cutting list of beams
22-27,
and steel works (unit
2023
weight and different
diameters of bars)
✓ Developed the ability to
predict the number of
materials (Gypsum
May 29
Board and M.R. Board)
- June
needed to construct a
3, 2023
ceiling system.
✓ Know some special
construction finishes
(wall and ceiling)
✓ Assessing all the
June 5experience gained in
9, 2023
OJT
E. Certification
A certification with the logo issued by the HTE issued to student intern after the
completion of the designated number of hours. The certification bears the seal,
signed by the HTE’s authorized representative.