Uploaded by steffel

ASME-B16.34

advertisement
ASME B16.34-2004
(Revision of ASME B16.34-1996)
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Valves—Flanged,
Threaded, and
Welding End
A N A M E R I C A N N AT I O N A L STA N DA R D
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
(Revision of ASME B16.34-1996)
Valves— Flanged,
Threaded, and
Welding End
A N A M E R I C A N N AT I O N A L S TA N D A R D
Three Park Avenue • New York, NY 10016
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
Date of Issuance: September 2, 2005
The next edition of this Standard is scheduled for publication in 2007. There will be no addenda
issued to this edition.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
ASME issues written replies to inquiries concerning interpretations of technical aspects of this
Standard. Interpretations are published on the ASME Web site under the Committee Pages at http://
www.asme.org/codes/ as they are issued.
ASME is the registered trademark of The American Society of Mechanical Engineers.
This code or standard was developed under procedures accredited as meeting the criteria for American National
Standards. The Standards Committee that approved the code or standard was balanced to assure that individuals from
competent and concerned interests have had an opportunity to participate. The proposed code or standard was made
available for public review and comment that provides an opportunity for additional public input from industry, academia,
regulatory agencies, and the public-at-large.
ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.
ASME does not take any position with respect to the validity of any patent rights asserted in connection with any
items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for
infringement of any applicable letters patent, nor assume any such liability. Users of a code or standard are expressly
advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is
entirely their own responsibility.
Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as
government or industry endorsement of this code or standard.
ASME accepts responsibility for only those interpretations of this document issued in accordance with the established
ASME procedures and policies, which precludes the issuance of interpretations by individuals.
No part of this document may be reproduced in any form,
in an electronic retrieval system or otherwise,
without the prior written permission of the publisher.
The American Society of Mechanical Engineers
Three Park Avenue, New York, NY 10016-5990
Copyright © 2005 by
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
All rights reserved
Printed in U.S.A.
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Committee Roster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Correspondence With the B16 Committee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
v
vii
viii
ix
1
Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
2
Pressure-Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
3
Nominal Pipe Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
4
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
5
Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
6
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
7
Pressure Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
8
Requirements for Special Class Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
Figures
1
Method of Designating Location of Auxiliary Connections When Specified . . . . . . . .
2
Thread Length for Auxiliary Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
Socket Welding for Auxiliary Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Butt Welding for Auxiliary Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
Bosses for Auxiliary Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
Gate Body (Pressure Seal Bonnet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
Y Pattern Globe Body (Pressure Seal Bonnet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
Angle Body (Pressure Seal Bonnet) Bonnet Same as Y Pattern Globe . . . . . . . . . . . . . .
9
Elbow Down (Pressure Seal Bonnet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
Gate Body (Flanged Bonnet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11
Globe Body (Flanged Bonnet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12
Butterfly Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
Plug Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14
Conduit Gate Body (Pressure Seal Bonnet) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
Dished Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
Flat Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
Butterfly Valve Body . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
14
14
14
15
15
16
16
17
17
18
18
19
19
20
20
21
Tables
1
Material Specification List: Applicable ASTM Specification . . . . . . . . . . . . . . . . . . . . . . . .
2
Pressure-Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
Valve Body Minimum Wall Thickness tm, mm (in.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Minimum Wall Thickness for Socket Welding and Threaded Ends . . . . . . . . . . . . . . . . .
22
26
91
97
Mandatory Appendices
I
Radiography Examination: Procedure and Acceptance Standards . . . . . . . . . . . . . . . . . .
II
Magnetic Particle Examination: Procedure and Acceptance Standards . . . . . . . . . . . . . .
III
Liquid Penetrant Examination: Procedure and Acceptance Standards . . . . . . . . . . . . . .
IV
Ultrasonic Examination: Procedure and Acceptance Standards . . . . . . . . . . . . . . . . . . . . .
V
Requirements for Limited Class Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VI
Basis Equations for Minimum Wall Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VII Pressure-Temperature Ratings: U.S. Customary Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VIII Reference Standards and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
99
101
102
103
104
107
109
172
iii
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
CONTENTS
Nonmandatory Appendices
A
Relationship Between Nominal Pipe Size and Inside Diameter . . . . . . . . . . . . . . . . . . . .
B
Method Used for Establishing Pressure-Temperature Ratings . . . . . . . . . . . . . . . . . . . . . .
C
Quality System Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
iv
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
174
176
183
FOREWORD
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
In December 1969, American National Standards Committee B16 changed its name from Standardization of Pipe Flanges and Fittings to Standardization of Valves, Fittings, and Gaskets,
reflecting American National Standards Institute approval of a broadened scope for the B16
Committee. At the same meeting, the committee approved a plan for the organization of a
subcommittee to develop a new standard for steel valves with other than flanged ends. Subsequently, B16 Subcommittee 15 was appointed and held its first meeting in December 1970.
Historically, in the development of standards and pressure-temperature ratings for steel valves,
the various rating classes for flanges provided an obviously logical basis for valve ratings. Steel
valves with flanges of standard dimensions, many also offered in buttwelding-end versions, were
given the same pressure-temperature ratings as the flanges. In 1949, a new edition of the standard,
then designated B16e 1949, was published, in which a table covering wall thickness requirements
for weld end valves had been added. In 1964, the Manufacturer’s Standardization Society of the
Valve and Fittings Industry developed and published Standard Practice SP 66, covering pressuretemperature ratings of steel buttwelding-end valves. SP 66 introduced a new method for establishing ratings by making ratings a function of the mechanical strength properties of the body material
at all temperatures. Following the publication of SP 66, B16 activated Subcommittee 4 for the
purpose of studying the general subject of pressure-temperature ratings and developing rational
criteria for such ratings.
In the B16 charge to Subcommittee 15, it was established that the new standard would replace
SP 66 and also remove the reference to buttwelding-end valves from B16.5. Flanged-end valves
would continue to be covered in B16.5 but on a fully specified basis, rather than as an add-on.
As the work of the subcommittee got underway, concurrent action was initiated in Subcommittee
3 for revision of B16.5. Subsequent operations of Subcommittees 3 and 15 were closely coordinated
to provide assurance that the new standard and the revised B16.5 would be compatible.
A key and basic issue of mutual concern in this coordination was the matter of pressuretemperature ratings. It was necessary to incorporate the SP 66-type ratings in the new standard,
but at the same time also to provide ratings equivalent to those in B16.5 covering the buttwelding
equivalents of flanged-end valves. Subcommittee 4 had made definitive recommendations for
revisions in the flange ratings and it was obviously desirable to rationalize the two types of
ratings as they would appear side-by-side in the new standard.
The results of these efforts appear herein in the form of pressure-temperature ratings tables.
The method of computing the ratings is detailed in Nonmandatory Appendix B. The ratings
differ from the pre-1968 B16.5 ratings because they are now calculated as a function of the
mechanical properties of the pressure boundary materials, in contrast to the empirical basis used
previously. A change in the SP 66-type rating (herein designated Special Class) discontinues the
application of a plasticity factor at elevated temperatures which, in the opinion of the committee,
could not be justified in dimension-sensitive valves.
Other innovations include the coverage of forged or fabricated body valves and an increase in
detailed coverage by pressure-temperature ratings from 17 materials in B16.5 to 24 material
groups in the new standard and in the revised B16.5. Dimensional requirements have been refined
and augmented to give the designer more latitude and the user more assurance of adequacy. A
number of the innovations have had trial use and at least some degree of acceptance, as they
have been taken from the section on valve requirements developed and published by the ASME
Boiler and Pressure Vessel Code to cover valves used in nuclear power plants. A section on valve
testing eliminates uncertainties on such points as seat test requirements and stem seal testing.
Approval for the 1973 edition of the Standard by the American National Standards Institute
was granted in October 1973.
In December 1973, a reorganization of the subcommittee structure for B16 was approved.
Subcommittee 15 was redesignated as Subcommittee N and was assigned responsibility for all
steel valves. Work began to include coverage for flanged-end valves in ANSI B16.34. The 1977
v
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
edition contained flanged-end valve requirements formerly in ANSI B16.5. The rating procedures
of B16.5 were adopted and made applicable to Standard Class buttwelding-end valves. The
method of deriving ratings was revised. Major changes were made in the method for determining
ratings for austenitic stainless steel valves and ratings for Class 150 valves for all materials. The
pressure-temperature tables and materials groups were rearranged and revised using data from
the reference Sections of the ASME Boiler and Pressure Vessel Code through the Summer 1975
Addenda. A number of clarifying and editorial revisions were also made in order to improve
the text. It was also resolved that frequent minor changes in pressure-temperature ratings because
of revisions to the reference material strength property tables should be avoided and that, as a
general guide, such changes should not be considered unless resulting ratings would be changed
by an amount in excess of 10%.
Approval for the 1977 edition of the Standard by the American National Standards Institute
was granted on June 16, 1977.
During 1979, work began on the 1981 edition. Materials coverage was expanded. Nickel alloys
and other alloys were added. Bolting rules were revised to accommodate special alloy bolting
for the new materials. Revisions were included to clarify requirements for rotary motion valves,
e.g., ball valves and butterfly valves. Wafer-type valves were specifically identified. Other clarifying and editorial revisions were made in order to improve the text.
Following approvals by the Standards Committee and Secretariat, approval for the 1981 edition
was granted by the American National Standards Institute on August 14, 1981.
During 1985, revisions were proposed that added requirements for socket welding-end and
threaded-end valves. The inclusion of requirements for these valves increased the scope of the
Standard. Also, the listings for nickel alloy and other alloy valves materials were expanded. Rules
for threaded body joints were added, and wafer-type valve body rules improved.
Following approvals by the Standards Committee and ASME, approval for the 1988 edition
was granted by the American National Standards Institute on February 24, 1988.
During 1993 and carrying over into 1994, revisions offered included multiple material marking
and an improved interpolation procedure. New materials were added and the pressure-temperature rating tables were recalculated in accordance with Nonmandatory Appendix B using the
latest data available from the reference ASME Boiler and Pressure Vessel Code sources. An
appendix was added covering nonmandatory requirements for a quality system program.
Following the approvals the Standards Committee and ASME, approval for the new edition
was granted by the American National Standards Institute on October 3, 1996.
Work was started during 1999 to revise the standard to include metric units as the primary
reference units while maintaining U.S. customary units in either parenthetical or separate forms.
The goal is to delete the U.S. customary units when the standard is next issued. All pressuretemperature ratings have been recalculated using data from the latest edition of the ASME Boiler
and Pressure Vessel Code, Section II, Part D. As a result, some materials have been shifted to
other material groups and some changes have been made to some valve ratings within material
groups. Because of diminished interest for flanged end valves conforming to ASME Class 400,
they are not specifically listed in this revision. Flanges for Class 400 will continue to be listed in
B16 flange standards. Provision has been made to allow Class 400 valves to be furnished as
intermediate rated valves. Numerous requirement clarifications and editorial revisions have also
been made.
Following the approvals of the Standards Committee and ASME, approval for the new edition
was granted by the American National Standards Institute on February 20, 2004.
All requests for interpretation or suggestions for revisions should be sent to the Secretary, B16
Committee, The American Society of Mechanical Engineers, Three Park Avenue, New York, NY
10016-5990.
vi
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16 COMMITTEE
Standardization of Valves, Flanges, Fittings, and Gaskets
(The following is the roster of the Committee at the time of approval of this Standard.)
OFFICERS
H. R. Sonderegger, Chair
M. L. Nayyar, Vice Chair
P. A. Reddington, Secretary
COMMITTEE PERSONNEL
R. D. Manning, U.S. Coast Guard
W. N. McLean, Newco Valves
T. A. McMahon, Fisher Controls International, Inc.
M. L. Nayyar, Bechtel Power Corp.
J. D. Page, U. S. Regulatory Commission
P. A. Reddington, The American Society of Mechanical Engineers
R. A. Schmidt, Trinity-Ladish
H. R. Sonderegger, Anvil International, Inc.
W. M. Stephan, Flexitalic, Inc.
T. F. Stroud, Ductile Iron Pipe Research Association
R. E. White, Richard E. White & Associates PC
D. A. Williams, Southern Company Services
W. B. Bedesem, ExxonMobil Research and Engineering Co.
M. A. Clark, Nibco, Inc.
A. Cohen, Arthur Cohen & Associates
C. E. Floren, Muller Co.
D. R. Frikken, Consultant
A. Hamilton, ABS Americas
M. L. Henderson, Forgital USA
G. A. Jolly, Vogt Valve/Flowserve
M. Katcher, Haynes International
W. G. Knecht, Consultant
R. Koester, The William Powell Co.
B16 SUBCOMMITTEE N PERSONNEL
W. G. Knecht, Consultant
R. D. Manning, U. S. Coast Guard
T. A. McMahon, Fisher Controls International, Inc.
M. L. Nayyar, Bechtel Power Corp.
J. D. Page, U. S. Regulatory Commission
G. J. Paptzun, Consultant
D. W. Rahoi, CCM 2000
R. W. Rapp, Jr., Consultant
H. R. Sonderegger, Anvil International, Inc.
J. C. Thompson, Consultant
J. P. Tucker, Flowserve
J. T. White, Puget Sound Naval Shipyard
J. B. Wright, Metso Automation
W. N. McLean, Chair, Newco Valves
R. Koester, Vice Chair, The William Powell Co.
A. J. Roby, Secretary, The American Society of Mechanical
Engineers
R. W. Barnes, Anric Enterprises, Inc.
W. B. Bedesem, Exxon/Mobil Research and Engineering Co.
T. R. Brooks, Northrup Grumman Corp.
R. Chakravarti, Foster Wheeler USA Corp.
D. R. Frikken, Consultant
A. Hamilton, ABS Americas
G. A. Jolly, Vogt Valve/Flowserve
M. Katcher, Haynes International
vii
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
CORRESPONDENCE WITH THE B16 COMMITTEE
General. ASME Standards are developed and maintained with the intent to represent the
consensus of concerned interests. As such, users of this Standard may interact with the Committee
by requesting interpretations, proposing revisions, and attending Committee meetings. Correspondence should be addressed to:
Proposing Revisions. Revisions are made periodically to the Standard to incorporate changes
that appear necessary or desirable, as demonstrated by the experience gained from the application
of the Standard. Approved revisions will be published periodically.
The Committee welcomes proposals for revisions to this Standard. Such proposals should be
as specific as possible, citing the paragraph number(s), the proposed wording, and a detailed
description of the reasons for the proposal, including any pertinent documentation.
Interpretations. Upon request, the B16 Committee will render an interpretation of any requirement of the Standard. Interpretations can only be rendered in response to a written request sent
to the Secretary of the B16 Standards Committee.
The request for interpretation should be clear and unambiguous. It is further recommended
that the inquirer submit his/her request in the following format:
Subject:
Edition:
Question:
Cite the applicable paragraph number(s) and the topic of the inquiry.
Cite the applicable edition of the Standard for which the interpretation is
being requested.
Phrase the question as a request for an interpretation of a specific requirement
suitable for general understanding and use, not as a request for an approval
of a proprietary design or situation. The inquirer may also include any plans
or drawings, which are necessary to explain the question; however, they
should not contain proprietary names or information.
Requests that are not in this format will be rewritten in this format by the Committee prior
to being answered, which may inadvertently change the intent of the original request.
ASME procedures provide for reconsideration of any interpretation when or if additional
information that might affect an interpretation is available. Further, persons aggrieved by an
interpretation may appeal to the cognizant ASME Committee or Subcommittee. ASME does not
“approve,” “certify,” “rate,” or “endorse” any item, construction, proprietary device, or activity.
Attending Committee Meetings. The B16 Standards Committee regularly holds meetings, which
are open to the public. Persons wishing to attend any meeting should contact the Secretary of
the B16 Standards Committee.
viii
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Secretary, B16 Standards Committee
The American Society of Mechanical Engineers
Three Park Avenue
New York, NY 10016-5990
INTRODUCTION
An American National Standard is intended as a basis for common practice by the manufacturer,
the user, and the general public. The existence of an American National Standard does not in
itself preclude the manufacture, sale, or use of products not conforming to the standard. Mandatory
conformance is established, for example, by reference to the standard in a code, specification,
sales contract, or public law.
It should be noted, specifically regarding this Standard, that certain requirements reflecting
the general application of valves in a wide variety of services may not be considered to be
appropriate for some valves whose application is known and which may incorporate certain
features found by successful experience to be satisfactory. A specific case in point is that involving
valves developed and used in gas and petroleum product pipelines. Conformance of such valves
to the existing API 6D may by itself be sufficient to satisfy requirements of federal rules and
regulations established by the Department of Transportation, Office of Pipeline Safety Operations.
Another specific case is that involving valves used in instrument systems under an applicable
piping code. Conformance of such valves to the requirements of an existing piping code may by
itself be sufficient to satisfy jurisdictional rules and regulations.
This edition of ASME B16.34 states values in both metric SI and U.S. customary units of
measurement. These systems of units are to be regarded separately. The values stated in each
system are not exact equivalents; therefore each system shall be used independently of the other.
Combining values from the two systems constitutes nonconformance with this Standard.
ix
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
x
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
SCOPE
1.2.4 Quality Systems. Requirements relating to a
valve manufacturer ’s Quality System Program are
described in Nonmandatory Appendix C.
1.1 General
1.2.5 Relevant Units. This Standard states valves in
both metric and U.S. customary units. These systems of
units are to be regarded separately. The U.S. customary
units are shown in parentheses or are listed in separate
tables. The values stated in each system are not exact
equivalents; therefore it is required that each system of
units be used independently of the other. Combining
values from the two systems constitutes nonconformance with the Standard.
This Standard applies to new construction and covers
pressure-temperature ratings, dimensions, tolerances,
materials, nondestructive examination requirements,
testing, and marking for cast, forged, and fabricated
flanged, threaded, and welding end and wafer or
flangeless valves of steel, nickel-base alloys, and other
alloys shown in Table 1. Wafer or flangeless valves,
bolted or through-bolt types, that are installed between
flanges or against a flange are treated as flanged-end
valves. Alternative rules for NPS 21⁄2 and smaller valves
are given in Mandatory Appendix V.
1.3 Service Conditions
Criteria for selection of valve types and materials suitable for particular fluid service are not within the scope
of this Standard.
1.2 Applicability
1.2.1 Standards and Specifications. Standards and
specifications adopted by reference in this Standard and
the names and addresses of the sponsoring organizations are shown in Mandatory Appendix VIII. It is not
considered practical to refer to a specific edition of each
of the standards and specifications in the individual
clause references. Instead, the specific edition references
are included in Mandatory Appendix VIII. A product
made in conformance with a prior edition of reference
standards and in all other respects conforming to this
Standard shall be considered to be in conformance even
though the edition reference may have been changed in
a subsequent revision of this Standard.
1.4 Convention
For the purpose of determining conformance with
this Standard, the convention for fixing significant digits
where limits, maximum and minimum values, are specified shall be ‘‘rounding off’’ as defined in ASTM Practice
E 29. This requires that an observed or calculated value
shall be rounded off to the nearest unit in the last righthand digit used for expressing the limit. Decimal values
and tolerance do not imply a particular method of measurement.
1.5 Denotation
1.2.2 Time of Purchase, Manufacture, or Installation.
The pressure-temperature ratings included in this Standard are applicable, upon publication, to all valves covered within its scope that meet its requirements. For
unused valves, valves which have been maintained in
inventory, the manufacturer may certify conformance to
this edition provided that it can be demonstrated that
all requirements of this edition have been met. However,
where such components were installed under the pressure-temperature ratings of an earlier edition of ASME
B16.34, those ratings shall apply except as may be governed by an applicable Code or regulation.
1.5.1 Pressure Rating Designation. Class, followed by
a dimensionless number, is the designation for pressuretemperature ratings. Standardized designations are as
follows:
Class
150
300
600
900
1500
4500
Class 400, an infrequently used flanged-end valve designation, is regarded as an intermediate class designation.
1.5.2 Size. NPS, followed by a dimensionless number, is the designation for nominal valve size. NPS is
related to the reference nominal diameter, DN, used in
international standards. The relationship is, typically, as
follows:
1.2.3 User Accountability. This Standard cites duties
and responsibilities that are to be assumed by the valve
user in the areas of, for example, application, installation, system hydrostatic testing, operation, and material
selection.
NPS
DN
1
⁄4
8
3
⁄8
10
1
⁄2
15
3
⁄4
20
1
25
11⁄4
32
11⁄2
40
1
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
2500
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
2
50
21⁄2
65
3
80
4
100
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
1
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
For NPS ≥ 4, the related DN is: DN p 25 multiplied
by the NPS number.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
2.1.2 Standard Class Valves. Valves conforming to
the requirements of this Standard, except for those meeting the additional requirements of Section 8 for Special
Class valves or of Mandatory Appendix V for Limited
Class valves, shall be designated Standard Class valves.
Ratings shall not exceed the values that are listed in
Table 2 with an identifying suffix “A.”
1.6 References
Codes, standards, and specifications, containing provisions to the extent referenced herein, constitute
requirements of this Standard. These reference documents are listed in Mandatory Appendix VIII.
2
2.1.3 Special Class Valves. Threaded- or welding-end
valves that conform to all the requirements of para. 2.1.2,
and in addition have successfully passed the examinations required by Section 8, may be designated Special
Class valves. Pressure-temperature ratings shall not
exceed the values that are listed in Table 2 with an
identifying table number suffix “B.” Special Class ratings shall not be used for flanged-end valves.
PRESSURE-TEMPERATURE RATINGS
2.1 General
Pressure-temperature ratings are designated by class
numbers. Each class number is further identified as Standard, Special, or Limited Class.
2.1.4 Limited Class Valves. Welding- or threaded-end
valves in sizes NPS 21⁄2 and smaller that conform to
the requirements of Mandatory Appendix V may be
designated Limited Class valves. Pressure-temperature
ratings shall not exceed the values calculated in accordance with Mandatory Appendix V. Limited Class ratings shall not be used for flanged-end valves.
2.1.1 Rating Designations. Rating designations are
tabulated for Standard and Special Class 150, 300, 400,
600, 900, 1500, 2500, and 4500 in Table 2 in metric units
and in Mandatory Appendix VII in customary units.
Ratings for Limited Class are determined by the method
in Mandatory Appendix V.1
(a) Flanged-end valves shall be rated only as Standard
Class.
(b) Class 4500 applies only to welding-end valves.
(c) A class designation greater than Class 2500 or a
rating temperature greater than 538°C (1000°F) applied
to threaded-end valves is beyond the scope of this
Standard.
(d) Threaded and socket welding-end valves larger
than NPS 21⁄2 are beyond the scope of this Standard.
(e) Except as provided in para. 2.5, the tabulated ratings are the maximum allowable working pressures,
expressed as gage pressure, at the temperatures shown.
(f) Ratings intermediate to tabulated values are determined by linear interpolation between temperatures
within a class number or between class numbers, except
that for flanged-end valves interpolation between tabulated classes is not permitted. A further exception is that
Class 400 valves having ASME B16.5 flanged ends shall
use the intermediate rating method of para. 2.1.5.
(g) In all cases, valves shall be constructed so that the
body, bonnet or cover, body bolting, and bonnet or cover
bolting meet the 38°C (100°F) pressure rating requirements for the designated pressure class or pressure-temperature rating. However, pressure-temperature ratings
for the valve may be otherwise limited by construction
details or material design considerations, in which case
the requirements of paras. 4.3.3 and 7.2.3 shall be met.
2.1.5 Intermediate Rated Valves. A Standard Class
or Special Class welding- or threaded-end valve or a
Standard Class 400 flanged-end valve may be assigned
an intermediate pressure-temperature rating or Class in
accordance with para. 6.1.4, provided all other applicable requirements of this Standard are met. Correspondingly, an intermediate pressure rating or Class for
Limited Class valves having welding ends or threaded
ends may be assigned pressure-temperature ratings as
determined by the method described in Mandatory
Appendix V in conjunction with the interpolation procedure described in para. 6.1.4.
2.1.6 Valves Fabricated by Welding. A valve made
wholly or partly from segments of castings, forging,
bars, plates, or tubular product welded together will
merit the applicable pressure-temperature rating only if
(a) it conforms to all applicable requirements of this
Standard
(b) weld fabrication and heat treatment of welds are
in accordance with the ASME Boiler and Pressure Vessel
Code, Section VIII, Division 12
(c) nondestructive examination of welds is in accordance with the ASME Boiler and Pressure Vessel Code,
Section VIII, Division 1, as required to warrant a joint
efficiency, E, not less than
(1) 0.80 for flanged-end and Standard Class welding-end valves larger than size NPS 6
1
Throughout this Standard the metric unit used for pressure is
bar where 1 bar is equivalent to 0.1 MPa. Use of the term bar for
pressure is an aid in distinguishing between values for pressure
and stress where stress values are given in MPa units. This also
recognizes the common usage of the term bar for pressure in
International Standards for piping components such as valves and
fittings.
2
Standard Welding Procedure Specifications published by the
American Welding Society and listed in Appendix E of the ASME
Boiler and Pressure Code, Section IX, are permitted within the
limitations established by Article V of the ASME Boiler and Pressure Vessel Code, Section IX.
2
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
ASME B16.34-2004
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
(2) 1.00 for Special Class welding-end or threadedend valves in all sizes (see para. 8.3.3)
These requirements are not applicable to seal welds
or attachment welds such as for backseat bushings, seat
rings, lifting lugs, and auxiliary connections.
liquid may be heated during warm-up of the system.
Where such a condition is possible, it is the responsibility
of the user to provide, or require to be provided, means
in design, installation, or operation procedure to assure
that the pressure in the valve will not exceed that allowed
by this Standard for the attained temperature.
2.2 Rating Temperature
2.4 Guidance for the Use of Flanged Valve Ratings
The temperature shown for a corresponding pressure
rating is the temperature of the pressure-containing shell
of the component. In general, this temperature is the
same as that of the contained fluid. Use of a pressure
rating corresponding to a temperature other than that
of the contained fluid is the responsibility of the user,
subject to the requirements of applicable codes and regulations.
Application of flanged-end valves at either high or
low temperatures or in a service subject to rapid fluid
temperature variations entails some risk of flanged joint
leakage. Guidance in this regard is provided in ASME
B16.5 and more extensively in ASME PCC-1. Precautions
regarding the bolting of raised face flanges to cast iron
flanges are given in ASME B16.5.
2.3 Temperature Effects
2.5 Variances
2.3.1 High Temperature. Application at temperatures
in the creep range will result in decreasing bolt loads
as relaxation of flanges, bolts, and gaskets takes place.
Flanged joints subject to thermal gradients may likewise
be subject to decreasing bolt loads. Decreased bolt loads
diminish the capacity of the flanged joint to sustain loads
effectively without leakage. At elevated temperatures,
flanged joints, and in particular Class 150, may develop
leakage problems unless care is taken to avoid imposing
severe external loads or severe thermal gradients.
Except as provided in paras. 2.5.1, 2.5.2, and 2.5.3, the
pressure-temperature ratings are the maximum allowable working pressure for the corresponding temperature.
2.5.1 Safety Valves, Relief Valves, or Rupture Disk
Operation. Under conditions of safety valve, relief valve,
or rupture disk operation, pressure may exceed the rated
pressure for a valve furnished under this Standard by
no more than 10% of that defined by the pressure-temperature rating. Such conditions are necessarily of limited duration. Damage that may result from pressure
excursions in excess of the aforementioned is solely the
responsibility of the user.
2.3.2 Low Temperature. The pressure rating for service at any temperature below −29°C (−20°F) shall be
no greater than the rating shown in Table 2 for −29°C
(−20°F). Some of the materials listed in Table 1, notably
some carbon steels, may undergo a decrease in ductility
when used at low temperatures to such an extent as to
be unable to safely resist shock loading, sudden change
of stress, or high stress concentration. Some codes or
regulations may require impact testing for applications
even where temperatures are higher than −29°C (−20°F).
When such requirements apply, it is the responsibility
of the user to ensure these requirements are communicated to the manufacturer prior to the time of purchase.
2.5.2 Other Variances. Damage that may result from
subjecting a valve to other operating variances (transients) in excess of its pressure rating is solely the responsibility of the user.
2.5.3 System Hydrostatic Tests. If valves conforming
to this Standard are subjected to hydrostatic pressure
testing of piping systems with the valve in the closed
position at pressures greater than the 38°C (100°F) rating,
or, if applicable, at pressure greater than the closed pressure differential shown on the valve identification plate
(see para. 4.3.3), damage resulting from such testing is
solely the responsibility of the user. In the open position,
valves installed in a piping system may be subjected to
system pressure tests at pressures that do not exceed
the hydrostatic shell test of para. 7.1, provided the user
has determined that there are no functional limitations,
for example, restrictions on actuating devices or special
materials of construction.
2.3.3 Fluid Thermal Expansion. Under certain conditions, some double-seated valve designs are capable of
sealing simultaneously against pressure differential
from the center cavity to the adjacent pipe in both directions. A circumstance in which the center cavity is filled
or partially filled with liquid and subjected to an increase
in temperature can result in an excessive buildup of
pressure in the center cavity that may lead to pressure
boundary failure. An example is a piping system in
which liquid from the condensing, cleaning, or testing
fluids accumulates in the center cavity of a closed valve.
Such accumulation may result from leakage past the
upstream seat of the valve. If, during subsequent startup,
the valve is not relieved of the liquid by partial opening
of the valve, or by some other method, the retained
2.6 Multiple Material Grades
Material for valve bodies, bonnets, or cover plates may
meet the requirements of more than one specification or
the requirements of more than one grade of a specification listed in Table 1. In either case, the pressure-temperature ratings for any of these specifications or grades
3
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
may be used provided the requirements of para. 5.1 are
satisfied; the material is marked in accordance with para.
4.2.8; and account is taken of para. 5.2.2.
corresponding ASTM specification number in 4.2.2 (a)
and (b) provided that the requirements of the ASME
specification are identical or more stringent than the
ASTM specification for the Grade, Class, or Type of
material.
(d) A manufacturer may supplement these mandatory material identifications with his trade designation
for the material grade, but confusion with the marking
required herein shall be avoided.
2.7 Local Operating Conditions
When a valve (or series of valves) is installed in a
piping system that operates with different pressures (or
temperatures) on either side of the closed valve, it is the
responsibility of the user to ensure that the installed
valve is suitable for the highest of the rating requirements considering combinations of pressure and temperature.
3
4.2.3 Rating. The valve body shall be marked with
the number that corresponds to the pressure rating class
designation except that Special Class, Limited Class,
Intermediate Rated — Standard Class and Intermediate
Rated — Special Class valves may instead be marked
with a specific rated pressure and temperature.
NOMINAL PIPE SIZE
4
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
As applied in this Standard, the use of the phrase
“nominal pipe size” or the designation NPS followed
by a number is for the purpose of pipe or valve-end
connection size identification. The number is not necessarily the same as the valve inside diameter. The relationship between inside diameter (see para. 6.1.2) and
nominal pipe size is shown in Nonmandatory Appendix
A. The reference dimension, d, in Table 3 is the valve
inside diameter as defined in para. 6.1.2.
4.2.4 Temperature. Temperature markings are not
required except as indicated in paras. 4.2.3 and 4.3.3.
4.2.5 Size. The NPS designation number shall be
shown.
4.2.6. Omission of Markings. On valves whose size
or shape limits the body markings, they shall be omitted
in the following order:
(a) size
(b) rating
(c) material
(d) manufacturer’s name or trademark
MARKING
4.1 General
4.2.7 Ring-Joint Flange. Valves having ring-joint end
flanges shall have the edge (periphery) of each ringjoint end flange marked with the letter “R” and the
corresponding ring-groove number. Groove numbers
are listed in ASME B16.5.
Except as modified herein, valves shall be marked as
required in MSS SP-25 and shall include the following
requirements.
4.2 Identification Markings
4.2.1 Name. The manufacturer’s name or trademark
shall be shown.
4.2.8 Multiple Material Marking. Material for valve
bodies, bonnets, and cover plates that meet the requirements for more than one specification or grade of a
specification listed in Table 1 may, at the manufacturer’s
option, be marked with more than one of the applicable
specification or grade symbols. These identification
markings shall be placed to avoid confusion in identification. The acceptablility of multiple marking shall be in
accordance with the guidelines set out in ASME Boiler
and Pressure Vessel Code, Section II, Part D, Appendix 7.
4.2.2 Materials. Materials used for valve bodies, bonnets, and cover plates shall be identified in the following way.
(a) Cast valves shall be marked with the heat number
or heat identification and symbols (letters and numbers)
as given in the ASTM specification to designate the
material grade.
(b) Forged or fabricated valves shall be marked with
the ASTM specification number and grade identification
symbol (letters and numbers). If the ASTM grade identification symbols are unique to the material product form
or grade being used, that is, the symbols are not used
with any other ASTM material product form or grade,
the ASTM number may be omitted. When more than
one material or grade of materials is used for a fabricated
valve, each shall be identified. Also, when one material
grade is used for a valve assembly, a single material
marking on the body is all that is required.
(c) The ASME Boiler and Pressure Vessel Code, Section II specification number may be substituted for a
4.3 Identification Plate
4.3.1 Attachment. An identification plate that
includes the manufacturer’s name shall be secured to
each valve.
4.3.2 Pressure Markings. The identification plate
shall be marked with the applicable valve pressure rating at 38°C (100°F) and the pressure rating class designation number.
4.3.3 Special Markings. Valves whose construction
limits use to less than the pressure-temperature values
4
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
ASME B16.34-2004
length ⴛ 6.25 mm diameter (1 in. ⴛ 0.25 in. diameter)
tensile specimen in place of the standard 2 in. tensile
specimen. A master heat is previously refined metal of
a single furnace charge. Tensile specimens shall be cast
in molds of the same refractory as the castings and shall
be given the same heat treatment as the castings. When
investment castings are used for sizes and pressure
classes greater than those described in this paragraph, all
the requirements of the applicable material specification
listed in Table 1 shall be met.
for the marked pressure rating class designation shall
indicate these limitations on the identification plate.
Examples in this category are valves using elastomeric
gaskets or seating elements, valves with closure elements designed for closure pressure differentials lower
than the basic rated pressure of the valve body, or valves
using carbon steel bonnet bolts such as ASTM A 307,
Grade B.
4.4 Conformity
4.4.1 Designation. Valves conforming to Standard
Class requirements shall include the designation
“B16.34” on the identification plate. For Special Class
valves, the identification plate shall include the designation “B16.34 SPL.” For Limited Class valves, the identification plate shall include the designation “B16.34 LTD.”
The use of the prefix “ASME” to these designations is
optional.
5.1.4 Cast Surfaces. Cast surfaces of pressure boundary parts shall be in accordance with MSS SP-55 except
that all Type 1 defects are unacceptable and defects in
excess of Plates “a” and “b” for Type II through Type
XII are unacceptable.
5.1.5 Mechanical Properties. Mechanical properties
shall be obtained from test specimens that represent the
final heat-treated condition of the material required by
the material specification.
4.4.2 Compliance. The “B16.34” identification marking of para. 4.4.1 designates that the valve was manufactured in conformance with ASME B16.34.
5
5.2 Material Selection
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
5.2.1 Service Conditions. Criteria for the selection of
materials are not within the scope of this Standard. The
possibility of material deterioration in service and the
need for periodic inspections is the responsibility of the
user. Carbide phase conversion to graphite, oxidation
of ferritic materials, decrease in ductility of carbon steels
at low temperatures even in applications above -10°C
(20°F), and susceptibility to intergranular corrosion of
austenitic materials or grain boundary attack of nickelbase alloys are among those items requiring attention
by the user. A discussion of precautionary considerations can be found in ASME B31.3, Appendix F; ASME
Boiler and Pressure Vessel Code, Section II, Part D,
Appendix 6, and ASME Boiler and Pressure Vessel Code,
Section III, Division 1, Appendix W.
MATERIALS
5.1 General
The body, bonnet or cover, body joint bolting, and
body-bonnet or cover bolting, shall be constructed of
materials as listed in the respective ASTM specifications
referred to in Table 1. Identical materials in accordance
with the ASME Boiler and Pressure Vessel Code, Section
II may also be used for these parts.
5.1.1 Application. It is not required that identical
material or material form be used for body and bonnet
or cover parts. The rating applied, however, shall be
based on the valve body. The bonnet or cover shall be
designed and material selected so as to comply with the
body pressure-temperature rating. Selection of stems,
disks, and other parts, such as bonnet gaskets and bolting, subject to pressure and other loading, must be consistent with the applicable valve pressure-temperature
rating.
5.2.2 Responsibility. When service conditions dictate
the implementation of special material requirements,
e.g., using a Group 2 material above 538°C (1000°F), it
is the user’s responsibility to so specify to the manufacturer in order to ensure compliance with metallurgical
requirements listed in the end notes to Table 1 and the
notes in Table 2.
5.1.2 Carbon Steel Bonnet or Cover Bolting. It is permissible to use carbon steel, for example, ASTM A 307,
Grade B, for bonnet or cover bolting only for Class 300
and lower, provided the service temperature is limited
to 200°C (400°F) and marking is in accordance with
para. 4.3.3.
5.3 Electrical Continuity
Internal parts that are insulated from the valve body
may build up a static electric charge. An example is a ball
valve with seats and seals of nonconductive materials.
When service conditions require electrical continuity to
prevent static discharge, the user is responsible for specifying static grounding.
5.1.3 Investment Castings. When investment castings
are used for bodies, bonnets, or cover plates of valves
in sizes NPS 4 and smaller where the ratings do not
exceed Class 600, the requirements of the ASTM specifications referred to in Table 1 shall be met, except that
it is permissible to determine mechanical and chemical
properties from a master heat and to use a 25 mm gage
5.4 Flange Removal
When an end flange is removed from a flanged-end
valve body casting to make a welding-end valve casting,
5
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
discontinuities may be observed that would not have
been detrimental in the flanged body casting. The valve
manufacturer that removes an end flange from a valve
body casting during the course of manufacture has
responsibility for the acceptability of the resultant welding-end valve casting. This responsibility includes pressure testing the resultant weld-end valve in accordance
with Section 7.
6
the minimum wall thickness as described in paras. 6.1.1
and 6.1.2 within a region of 1.1 冪dtm measured from the
outside of the body run along the neck direction. The
diameter, d, is as defined in para. 6.1.2, and tm is the
minimum wall thickness as shown in Table 3. Minimum
wall thickness requirements are applicable to and measured from internally wetted surfaces, e.g., up to the
point where the body-bonnet seal is affected.
Beyond the aforementioned 1.1 冪dtm region, straight
circular sections of valve body necks with inside diameter d′ shall be provided with local wall thickness at least
equal to t′ where t′ is taken from the appropriate (tabulated or intermediate) rating Class in Table 3 using an
appropriate diameter d″.
DIMENSIONS
6.1 Body Dimensions
6.1.1 Wall Thickness. For inspection purposes, the
wall thickness of valve bodies at the time of manufacture
except as indicated in paras. 6.1.3 through 6.1.7 and 6.7,
shall be no less than the minimum values tm either as
shown in Table 3 or calculated using the equation shown
in Mandatory Appendix VI (which yield essentially the
same result). Linear interpolation may be used for wall
thickness values intermediate to those listed or calculated. See Nonmandatory Appendix B, para. B-5 for an
explanation of the interpolation procedure. The minimum thickness requirement for the body wall is applicable only as measured from internal wetted surfaces.
Minimum wall thickness determination shall not
include liners, linings, or cartridges.
For 150 ≤ Class ≤ 2500:
d″ p
For 2500 < Class ≤ 4500:
d″ p
冢
L p tm 1 + 1.1
冣
d
冪t 冣
m
measured starting from the intersection of the body
inside diameter and the axis of the body neck outside
diameter, shall be equal to t′ where t′ is obtained from
Table 3 using the appropriate body neck inside diameter
d′ and the appropriate pressure class. This special case
is illustrated in Fig. 17. Beyond the aforementioned distance, L, valve body necks shall be provided with local
minimum wall thickness based on d″, in accordance with
para. 6.1.3(a).
(d) For the special case of a body neck in which holes
are drilled or tapped in the body neck wall parallel with
the body neck axis, it is required that the sum of the
ligaments at the inner and outer sides be equal to or
greater than tm or t′, as applicable. The inner ligament
and the ligament at the bottom of the drill hole shall be
6.1.3 Valve Body Necks. For inspection purposes, the
wall thickness of valve body necks at the time of manufacture shall be no less than the minimum values determined by the following:
(a) Valve body necks, except for the special cases
described in paras. 6.1.3(b), (c), and (d), shall maintain
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
冢
Pc
d′
27 +
48
500
where Pc is the pressure class designation as defined in
Nonmandatory Appendix B, para. B-1.3.
(b) For the special case where d′ > 1.5d, it is necessary
that the wall thickness be equal to or greater than t′ for
the entire body neck length having diameter d′, including the aforementioned 1.1 冪dtm region.
(c) For the special case of valve body necks having a
small diameter relative to the body run diameter, that
is, d⁄d′ ≥ 4 (for example, a butterfly valve stem penetration), the minimum local wall thickness over a distance,
L, where
6.1.2 Inside Diameter. For the purpose of determining the wall thickness tm, the inside diameter, d, is taken
as the minimum diameter of the flow passage but not
less than 90% of the basic inside diameter at the valve
end. For socket welding- and threaded-end valves, the
socket or thread diameters and associated counterbores
or tapped bores need not be considered in establishing
the value of d (see paras. 6.2.3 and 6.2.4). For the special
case of valves used between high and low pressure sections of a system where an end connection for a thinner
pipe wall (or lower class flange) on one end than on the
other, the inside diameter, d, shall be based on the end
connection with the heavier pipe wall (or higher class
flange). Localized variations of inside diameter associated with transitions to weld preparations need not be
considered. Note, however, limitations of proximity of
body neck in para. 6.1.5. Where linings, liners, or cartridges are used to form the flow passage or portions
of the flow passage, the inside diameter, d, shall be that
at the liner-body interface. For inside diameters which
lie between diameters for which minimum wall thickness is tabulated, tm may be determined by linear interpolation.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
2d′
3
6
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
ASME B16.34-2004
6.1.7 Additional Metal Thickness. Additional metal
thickness needed, e.g., for assembly loads, actuating
(closing and opening) loads, shapes other than circular,
and stress concentrations, must be determined by individual manufacturers since these factors vary widely. In
particular, inclined stem valves, intersections and openings in enlarged body cavities, and some types of fabricated body valves may require additional reinforcement
to assure adequate strength and rigidity.
no less than 0.25tm or 0.25t′, as applicable. Furthermore,
it is required that this thickness shall extend for a length
along the body length, starting at the top of the neck,
at least equal to the depth of the hole plus a distance
equal to one-half of the hole or bolt diameter.
6.1.4 Valves With Intermediate Ratings. The intermediate pressure temperature rating class designation, Pci,
and minimum wall thickness, tm, for threaded- or welding-end valves with intermediate pressure ratings shall
be determined in accordance with para. B-5.3 of Nonmandatory Appendix B. For Class 400 flanged-end
valves the minimum wall thickness, tm, and the intermediate pressure ratings shall be determined by interpolation in accordance with para. B-5.3 of Nonmandatory
Appendix B.
6.2 End Dimensions
6.2.1 Buttwelding Ends. Unless otherwise specified
by the purchaser, the details of the welding-end preparation shall be in accordance with ASME B16.25 with
(a) the inside diameter (denoted as dimension B in
ASME B16.25) having the following tolerance:
6.1.5 Contours at Body Ends. Contours at valve body
ends shall be in accordance with the following requirements.
(a) Buttwelding Ends. The weld preparation (see para.
6.2.1) shall not reduce the body wall thickness to less
than the values required by para. 6.1.1 or 6.1.4 within a
region closer to the outside surface of the body neck
than tm measured along the run direction. The transition
to the weld preparation shall be gradual and the section
must be essentially circular through the entire length of
the transition. Sharp discontinuities or abrupt changes in
sections that infringe into the transition shall be avoided,
except that test collars or bands, either welded or integral, are allowed. In no case shall the thickness be less
than 0.77tm at a distance of 2tm from the weld end.
(b) Socket Welding and Threaded Ends. The distance
from the center line of generally cylindrical flow passages to the external surface of the body run shall be
no less than 0.5 times the appropriate nominal pipe
outside diameter listed in ASME B36.10M.
(c) Completed Ends. After the tests required by para.
7.1 have been completed, and at the manufacturer’s discretion, semifinished buttwelding ends may be
machined to final dimensions, flange gasket seating surfaces may be machined to a final surface finish, or
threaded ends may be converted to socket welding ends,
all without any additional pressure testing.
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Tolerance for “B” Dimension
NPS ≤ 10
12 ≤ NPS ≤ 18
20 ≤ NPS
± 1.0 mm (± 0.03 in.)
± 2.0 mm (± 0.06 in)
+ 3.0, – 2.0 mm (+ 0.12, – 0.06 in.)
(b) the outside diameter at welding ends (denoted as
dimension A in ASME B16.25) having a valve not less
than that shown for wrought or fabricated components.
In all cases, the thickness of the body run or nozzle
transition (see para. 6.1.5) starting at a distance 2tm from
the buttwelding end, shall be no less than 0.77tm.
6.2.2 Flanged Ends. Flanged ends shall be prepared
with flange facing, nut-bearing surfaces, outside diameter, thickness, and drilling in accordance with ASME
B16.5 requirements for
(a) flanged fittings for Class 150 and 300 valves
(b) flanges for Class 600 and higher values
When required, valve end flanges may be furnished
with tapped holes for engaging flange bolting. Thread
engagement in a flange assembly with tapped holes shall
provide full effective thread engagement, not including
the chamfered thread, for a length at least equal to the
nominal diameter of the bolt thread. For additional considerations, see para. 6.4.3.
6.2.3 Socket Welding Ends. The socket bore diameter,
depth of socket, and end surfaces shall be in accordance
with ASME B16.11. The minimum thickness of the socket
wall extending over the socket depth, including any
associated counterbore, shall be in accordance with
Table 4.
6.1.6 Local Areas. Local areas having less than minimum wall thickness are acceptable provided that all of
the following limitations are satisfied.
(a) Measured thickness is no less than 0.75to.
(b) The area of subminimum thickness can be
enclosed by a circle whose diameter is no greater than
0.35 冪doto). For valve body necks, use do p d′ and to p
t′ (see para. 6.1.3). For all other local areas, use do p d
(see para 6.1.2) and to p tm (see para. 6.1.1 or 6.1.4, as
appropriate).
(c) Enclosure circles are separated from each other by
an edge-to-edge distance of no less than 1.75 冪doto.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Size
6.2.4 Threaded Ends. End connections shall have
taper pipe threads in accordance with ASME B1.20.1.
The minimum thickness of the wall extending over the
length of an internal thread, including any tap bore or
counterbore, shall be in accordance with Table 4. Thread
lengths and gaging requirements shall be in accordance
with ASME B16.11.
7
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
6.2.5 Intermediate Rated Socket Welding and
Threaded-End Valves. The minimum socket wall thickness and the minimum threaded-end wall thickness for
valves with intermediate ratings may be determined by
interpolation using the method of para. 6.1.4(b) using
wall thickness values from Table 4.
6.3.6 Size. Unless otherwise specified, auxiliary connections shall be as follows:
6.2.6 End to End. End-to-end dimensions and faceto-face dimensions for buttwelding-end valves and for
flanged-end valves shall be in accordance with ASME
B16.10 or other dimensions by agreement between manufacturer and purchaser. For some valve types, both long
and short pattern dimensions are listed in ASME B16.10.
It should not be assumed that all designs of the type
listed could be accommodated in the short pattern
dimension series. For valve types not included in ASME
B16.10, dimensions shall be the manufacturer ’s
standard.
6.3.7 Designating Locations. A means of designating
locations for auxiliary connections for some valve types
is shown in Fig. 1. A letter designates each of these
locations so that the desired locations for the illustrated
types of valves may be specified without using further
sketches or description.
6.3 Auxiliary Connections
6.4.1 Bonnet or Cover Joints. Valve bonnet or cover
joints, the joints between a valve body and a bonnet or
cover are joints that are not subject to direct piping loads.
Valve Size, NPS
Connection, NPS
2 ≤ NPS ≤ 4
5 ≤ NPS ≤ 8
10 ≤ NPS
1
⁄2
⁄4
1
3
6.4 Valve Joints
Valves with bolted or threaded bonnet or cover joints
or body joints shall meet the following tensile or shear
area requirements.
6.3.1 General. Auxiliary connections shall be
designed, fabricated, and examined so as to warrant at
least the same pressure-temperature ratings as the valve
and shall be installed prior to the shell test of the valve
to which they are attached, except that upon agreement
between the manufacturer and purchaser, auxiliary connections installed after the valve shell tests are acceptable. Welded auxiliary connections shall be made by a
qualified welder using a qualified welding procedure,
both in accordance with ASME Boiler and Pressure Vessel Code, Section IX.
6.4.1.1 Bolted Bonnet or Cover Joints. Where bonnets or covers are joined to valve bodies by means of
bolting, bolting shall be threaded in accordance with
ASME B1.1 for inch dimensioned bolting or ASME
B1.13M for metric bolting and, as a minimum, shall
satisfy the following bolt cross-sectional area requirements:
Pc
6.3.2 Pipe Thread Tapping. Holes may be tapped in
the wall of a valve if the metal is thick enough to allow
the effective thread length specified in Fig. 2. Where
metal thickness is insufficient or the tapped hole needs
reinforcement, a boss shall be added as shown in Fig. 5.
Ag
≤ K1Sa ≤ 9000
Ab
6.3.3 Socket Welding. Sockets may be provided in
the wall of a valve if the metal is thick enough to accommodate the depth of socket and retaining wall specified
in Fig. 3. Where the metal thickness is insufficient or the
socket opening requires reinforcement, a boss shall be
added as shown in Fig. 5. The length of the leg of the
attachment weld shall be not less than 1.09 times the
nominal pipe wall thickness of the auxiliary connection
or 3.2 mm (0.12 in.), whichever is greater.
where
Ab p total effective bolt tensile stress area.
Ag p area bounded by the effective outside periphery
of a gasket or O-ring or other seal-effective
periphery, except that in the case of a ringjoint the bounded area is defined by the pitch
diameter of the ring.
K1 p 65.26/MPa when Sa is expressed in MPa units.
(K1 p 0.45/psi when S is expressed in psi units.)
Pc p pressure rating class designation (see Nonmandatory Appendix B, para. B-1.3)
Sa p allowable bolt stress at 38°C (100°F), MPa (psi).
When greater than 137.9 MPa (20,000 psi), use
137.9 MPa (20,000 psi).
6.3.4 Butt Welding. Auxiliary connections may be
attached by butt welding directly to the wall of the valve
(see Fig. 4). Where the size of the opening is such that
reinforcement is necessary, a boss shall be added as
shown in Fig. 5.
The allowable bolt stress values shall be taken from
the ASME Boiler and Pressure Vessel Code, Section II,
Part D using the listings for Section VIII, Division 1, or
Section III, Division 1, Class 2 or Class 3. This algebraic
expression requires that a consistent set of units be used.
6.3.5 Bosses. Where bosses are required, the
inscribed diameters shall be not less than those shown
in Fig. 5 and the height shall provide metal thickness
to satisfy the requirements of Fig. 2 or 3.
6.4.1.2 Threaded Bonnet or Cover Joints. Where
bonnets or covers are joined to valve bodies by means
of threads, thread shear area, as a minimum, shall satisfy
the following.
8
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Pc
ASME B16.34-2004
Ag
≤ 4200
As
flow reversal, shall be provided with a means so that,
in the event of a structural failure of stem-to-closure
attachment items, the stem will not be ejected through
the pressure boundary while the valve is under pressure.
where
As p total effective thread shear area
6.5.1.3 Material Deterioration. The requirements of
para. 6.5.1.2 do not alter the user’s responsibility for
exercising control over in-service material deterioration
or the need for periodic inspections. See para. 5.2.1.
6.4.2 Body Joints. Valves with bodies of sectional construction such that bolted or threaded body joints are
subject to piping mechanical loads shall, as a minimum,
satisfy the following requirements.
6.5.2 Position Indication. Valves of the quarter-turn
type (e.g., ball, plug, or butterfly) shall have a means to
indicate the ball, plug, or disk position. The design shall
be such that the components of the indicating means
cannot be assembled to falsely indicate the valve open
or closed position.
6.4.2.1 Bolted Body Joints. Bolted body joints shall
use bolting threaded in accordance with ANSI B1.1 for
inch dimensional bolting or ASME B1.13M for metric
bolting and, as a minimum, shall satisfy the following
bolt cross-sectional area requirement.
Pc
6.6 Installation Limitations
Ag
≤ K2Sa ≤ 7000
Ab
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
6.6.1 Single Flange Installation. Flanged and wafer
or flangeless valves are intended for installation between
where
flange pairs. These valves, however, can also be designed
K2 p 50.76/MPa when Sa is expressed in MPa units.
(K2 p 0.35/psi when Sa is expressed in psi units) for installation against a single flange for the purpose
of effecting closure in dead-end piping. Valves for the
This algebraic expression requires that a consistent set
latter service shall be designed such that those parts
of units be used.
necessary to support pressure loads acting across the
seating element safely support the maximum differential
6.4.2.2 Threaded Body Joints. Threaded body joints
pressure rating of the valve. Examples of such parts are
shall, as a minimum, satisfy the following thread shear
end entry threaded seat retaining ferrules of ball valves
area requirement.
and bolted seat seal retaining plates of butterfly valves.
In the event that the valve design cannot accommodate
Ag
Pc
≤ 3300
these pressure loads, then the valve shall be marked to
As
show such installation restriction.
6.4.3 Additional Considerations. Bolting or threading
6.6.2 Disk Clearance. Valves that can be bolted
in excess of the minimum requirements of this Standard
between
flanges or against a flange (e.g., butterfly or
may be required because of, for example, valve design,
swing
check
valves) may have a disk that will, upon
special gasket compression requirements, special specirotation,
project
beyond the plane of the flange gasket.
fied service conditions, or operation at high temperaThe valve design shall be such that there will be no intertures where differences in the creep characteristics
ference between the valve disk and companion flanges
between body and bolting materials could compromise
or adjacent piping for the following pipe schedules.
joint sealing capability. Since these factors vary widely,
these requirements must be accounted for by individual
manufacturers.
6.5 Stems
Stems, variously referred to as spindles, shafts, or pins,
are collectively identified herein as stems.
Pressure Class
Valve Size, NPS
Pipe Schedule
150
300
600
600
2 ≤ NPS ≤ 24
2 ≤ NPS ≤ 24
2 ≤ NPS ≤ 6
8 ≤ NPS ≤ 14
40
80
80
100
For other valve sizes and pressure classes, pipe inside
diameter and disk clearance shall be as agreed between
manufacturer and purchaser.
6.5.1 Stem Retention
6.5.1.1 Retention by Stem Seal Elements. Valves
shall be designed so that the stem seal retaining fasteners
(e.g., packing gland fasteners) alone do not retain the
stem. Specifically, the design shall be such that the stem
shall not be capable of removal from the valve, while
the valve is under pressure, by the removal of the stem
seal retainer (e.g., gland) alone.
6.7 Wafer or Flangeless Valves
The design of valves that can be bolted between
flanges or against a flange (e.g., butterfly valves) shall
conform to the applicable requirements for flanged
valves and the requirements of paras. 6.7(a) through (f)
(see Fig. 17).
(a) The design shall provide for boltup using all of
the bolt holes and bolt circle of the specified flange.
6.5.1.2 Retention by Closure Member. Valves,
including those intended for isolation, regulation, or
9
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
7.2 Valve Closure Tests4
(b) Bolt holes, parallel to the body run, may be either
threaded or unthreaded. Threaded holes may be blind
holes suitable for use with bolt studs. When threaded,
full-thread engagement, excluding chamfers, shall be
provided to a depth not less than one nominal bolt
diameter.
(c) The required minimum valve body wall thickness,
tm, shall be measured from the valve body inside circumference out to the lesser of the valve body outside circumference or the circumference of a circle inscribed through
the inner tangent points to the flange bolt holes.
(d) The inner ligament (e of Fig. 17) of either a
through-hole or a blind threaded hole in the vicinity of
a stem penetration shall not be less than 25% of the
required wall thickness of the body neck but in no case
less than 2.5 mm (0.1 in.).
(e) The inner ligament (f and g of Fig. 17) for holes
parallel to the body run shall not be less than 0.25tm but
in no case less than 2.5 mm (0.1 in.). The sum of the
inner and outer ligaments shall not be less than tm.
(f ) A ligament within the minimum body wall
between two adjacent holes within the minimum body
wall (j of Fig. 17) shall be 0.25tm or greater but not less
than 2.5 mm (0.1 in.).
7.1 Shell Test
15
60
180
Pc ≤ 2500
Pc ≤ 300
Valve Size
Test Time, sec
NPS ≤ 2
21⁄2 ≤ NPS ≤ 8
10 ≤ NPS ≤ 18
20 ≤ NPS
15
30
60
120
7.2.4 Directional Seating. For other valve types, the
test pressure shall be applied across the closure member
in the direction producing the most adverse seating condition. For example, a globe valve shall be tested with
pressure under the disk. A check valve, globe valve, or
other valve type designed to be sold and marked as a oneway valve requires a closure test only in the appropriate
direction.
7.1.2 Test Duration. The shell test duration, the test
perod of inspection after the valve is fully prepared and
is under shell test pressure, shall be not less than the following:
NPS ≤ 2
21⁄2 ≤ NPS ≤ 8
10 ≤ NPS
NPS ≤ 4
NPS ≤ 12
7.2.3 Double Seating. For valves of the double seating
type, such as most gate and ball valves, the test pressure
shall be applied successively on each side of the closed
valve. The closure test shall include a method that fills the
body cavity between the seats and the bonnet cavity with
test fluid. As an alternative method, for valves with independent double seating (such as double disk gate valves),
the pressure may be applied inside the bonnet or body
with the disks closed.
7.1.1 Shell Test Pressure. Each valve shall be given a
shell test at a gage pressure no less than 1.5 times the 38°C
(100°F) pressure rating, rounded off to the next higher 1
bar (25 psi) increment. The test shall be made with water,
which may contain a corrosion inhibitor, with kerosene,
or with other suitable fluid,3 provided such fluid has viscosity not greater than that of water, at a temperature not
above 50°C (125°F). The test shall be made with the valve
in the partially open position.
Test Time, sec
Pressure Class
7.2.2 Closure Test Duration. The closure test duration,
the test period of inspection after the valve is fully prepared and is under full pressure, shall not be less than the
following.
PRESSURE TESTING
Valve Size
Valve Size, NPS
7.2.5 Restricted Seating. Valves conforming to this
Standard in all respects, except that they are designed for
operating conditions that have the pressure differential
across the closure member limited to values less than the
38°C (100°F) pressure rating and have closure members
and/or actuating devices (direct, mechanical, fluid, or
7.1.3 Acceptability. Visually detectable leakage
through pressure boundary walls is not acceptable. Leakage through the stem packing shall not be cause for rejection. However, stem seals shall be capable of retaining
pressure at least equal to the 38°C (100°F) rating without
visible leakage.
4
Closure tightness requirements vary with intended service
application and are not within the scope of this Standard. For
guidance in this regard see, for example, MSS SP061, API-598, or
ISO 5208.
3
There are hazards involved when gas is the fluid for testing.
When gas is used, appropriate precautions are required.
10
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
7
7.2.1 Closure Test Pressure. Each valve designed for
shut-off or isolation service, such as a stop valve, and each
valve designed for limiting flow reversal, such as a check
valve, shall be given a closure test. The closure test shall
follow the shell test except that for valves NPS 4 and
smaller with ratings Class 1500 and lower the closure test
may precede the shell test when a gas closure test is used.
The test fluid shall be as in para. 7.1. The test pressure
shall be not less than 110% of the 38°C (100°F) pressure
rating except that, at the manufacturer’s option, a gas closure test at gage pressure not less than 5.5 bar (80 psi)
may be substituted for valve sizes and pressure classes as
follows.
VALVES — FLANGED, THREADED, AND WELDING END
ASME B16.34-2004
8.3 Required Examination
electrical) that would be subject to damage at high differential pressures, shall be tested as described in the preceding paragraphs except that the closure test requirement
may be reduced to 110% of the maximum specified closed
position differential pressure. This exception may be
exercised as agreed between the user and manufacturer.
The manufacturer’s nameplate data shall include reference to any such limitations (see para. 4.3.3).5
8.3.1 Castings
8.3.1.1 Radiographic Examination. The radiographic procedures and acceptance standards to be used
shall be in accordance with Mandatory Appendix I. Body
and bonnet or cover sections requiring radiography are
as given in this paragraph and as shown typically in Figs.
6 through 16. For body and bonnet configurations not represented, it is permissible to construct a composite coverage area based on these illustrations and the descriptions
that follow. The distance A over which film coverage is
required, is expressed in multiples of tm where tm is the
minimum wall thickness requirement as determined by
para. 6.1. The value for film coverage of A is intended to
be the greater of 3tm or 70 mm (2.75 in.). It should be recognized, however, that in some cases the specified value of
A will exceed the intent of the film coverage area as illustrated in Figs. 6 through 16. For example, in Fig. 11 the
body neck or run sections may not accommodate the full
value of A as defined. In such cases the requirement may
be satisfied by providing film coverage substantially as
shown in the sketches. Also, if the full defined coverage
width A would result in the film running substantially
into an adjacent fillet or crotch section, the value of A may
be reduced to a practical maximum value. Small variations in coverage are permitted when necessary to accommodate standard film sizes. Film coverage shall include
the following areas.
(a) Body
(1) a band around each weld end extending back
from the body end a distance equal to the greater of 3tm
or 70 mm (2.75 in.)
(2) a band around the bonnet neck extending down
from the top of body on pressure seal valves and from
back of the flange on bolted bonnet valves a distance
equal to the greater of 3tm or 70 mm (2.75 in.)
(3) a band in the area of the junction between each
seat and body shell having a width equal to the greater of
3t m or 70 mm (2.75 in.) and an encompassing girth
extending between the fillets of the intersecting sections,
e.g., as shown approximately 210 deg for Fig. 6
(b) Bonnet. The junction of the stem seal chamber with
the bonnet closure plate or flange.
(c) Cover
(1) volumetric examination is not required for flat
covers with or without raised faces
(2) for dished covers, a band in the vicinity of the
junction between the dished and flanged sections having
a width equal to the greater of 3tm or 70 mm (2.75 in.)
7.3 Leakage Detection Devices
Leakage detection devices, e.g., pressure decay
devices, may be used for detecting leakage provided that
they are used at the pressures required for the shell and
closure tests of paras. 7.1 and 7.2. When used, the valve
manufacturer shall have demonstrated that the test
results are equivalent to the requirements of paras. 7.1
and 7.2.
7.4 Surface Protection
Valves shall not be painted or otherwise coated with
materials capable of sealing against leakage before the
shell tests are completed except that
(a) internal linings or coatings included in the design,
e.g., nonmetal butterfly valve linings, are permitted
(b) chemical corrosion protection treatment is permitted
(c) assembled valves having bodies and bonnets or
cover plates that have been separately tested in accordance with para. 7.1, prior to having been painted or
coated, may be painted or coated prior to final testing in
accordance with para. 7.1
8
REQUIREMENTS FOR SPECIAL CLASS VALVES
8.1 Scope
This section defines the nondestructive examination
(NDE) requirements and the rules for defect removal and
repair for cast, forged, rolled, wrought, and fabricated
valve bodies and bonnets or covers which are intended
for use in Special Class valves.
8.2 General
Nondestructive examinations shall be performed on
the cast, forged, rolled, wrought, or fabricated material
after heat treatment required by the material specification
either prior to or after the finish machining at the option
of the manufacturer. Surfaces shall be clean and free of
surface conditions which may mask unacceptable indications. Accessible surfaces (see paras. 8.3.1.2 and 8.3.2.2)
do not include threads, drilled or threaded holes, for
example, for bolting, packing, stems, or auxiliary connections.
8.3.1.2 Surface Examination. All exterior and all
accessible interior surfaces of body, bonnet, and cover
castings shall be given a surface examination. Table 1,
Group 1 materials shall be given either a magnetic particle
examination or a liquid penetrant examination. Table 1,
Groups 2 and 3 materials shall be given a liquid penetrant
5
Performance testing of valve actuating devices is not within
the scope of this Standard.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
11
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
examination. Magnetic particle examinations shall be in
accordance with the procedure and acceptance standards
of Mandatory Appendix II. Liquid penetrant examinations shall be in accordance with the procedure and
acceptance standards of Mandatory Appendix III.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
including fabrication welds, shall be examined as applicable by the methods of para. 8.3.1 for cast components,
or para. 8.3.2 for forged, rolled, or wrought components.
In addition, all fabrication welds shall receive nondestructive examination in accordance with the ASME
Boiler and Pressure Vessel Code, Section VIII, Division
1, in a manner that results in a weld joint efficiency of
1.0. These requirements are not applicable to welds such
as may be used for backseat bushings, seat rings, lifting
lugs, and auxiliary connections.
8.3.1.3 Ultrasonic Examination. An ultrasonic
examination of the casting in accordance with para.
8.3.2.1 may be substituted for the radiographic examination, provided that the user agrees and that it can be demonstrated by the manufacturer that the ultrasonic
examination produces interpretable results. The extent of
coverage shall be as typically shown in Figs. 6 through 16.
8.4 Defect Removal and Repair
8.4.1 Defect Removal. Defects in excess of acceptance
standards shall be removed by suitable means. If
removal of surface defects to an acceptable level does
not result in reducing wall thickness below an acceptable
value, the area shall be blended smoothly into the surrounding surface.
8.3.2 Forgings, Bars, Plates, and Tubular Products
8.3.2.1 Ultrasonic or Radiographic Examination. The
following material sections shall be ultrasonically examined in accordance with the procedure and acceptance
standards in Mandatory Appendix IV or radiographically examined in accordance with the procedure and
acceptance standards in Mandatory Appendix I.
(a) Body: cylindrical sections at run ends and body neck
(b) Bonnet: ring section excluding stuffing box and
yoke arms
(c) Cover
(1) for dished covers, a band in the vicinity of the
junction between the dished and flanged sections having
a width equal to the greater of 3tm or 70 mm (2.75 in.)
(2) volumetric examination is not required for flat
covers with or without raised faces
If, during the examination, ultrasonic indications are
noninterpretable due to, for example, grain size, the material shall be radiographed using the procedure requirements of para. 8.3.1.1. Subsurface linear indications are
unacceptable when they exceed
(a) 4.8 mm (0.19 in.) long in sections under 13 mm (0.5
in.) thick
(b) 9.6 mm (0.38 in.) long in sections 13 mm to 25 mm
(0.5 in. to 1 in.) thick
(c) 19.0 mm (0.75 in.) long in sections over 25 mm (1
in.) thick
8.4.2 Repair by Welding. Where defect removal
results in a wall thickness below an acceptable value,
the resultant cavity may be repaired by welding, provided that all of the following requirements are satisfied.
(a) The welding procedure and welding operator are
qualified in accordance with ASTM A 488 or the ASME
Boiler and Pressure Vessel Code, Section IX.
(b) Weld repairs to fabrication welds are made in
accordance with the ASME Boiler and Pressure Vessel
Code, Section VIII, Division 1.
(c) Weld repairs are heat treated in accordance with
the postweld heat treatment requirements of the ASME
Boiler and Pressure Vessel Code, Section VIII, Division 1,
Subsection C. The exemptions applicable to fabrication
welds including groove, fillet, and circumferential butt
welds also apply to repair welds. Postweld heat treatment (solution treatment) of repair welds in austenitic
stainless steels is neither required nor prohibited except
when required by the material specification.
(d) The area is reexamined by the NDE method which
originally disclosed the defect. The reexamination by
magnetic particle or liquid penetrant methods of a
repaired area originally disclosed by magnetic particle
or liquid penetrant examination shall be performed after
postweld heat treatment when postweld heat treatment
is performed. The reexamination by radiography or
ultrasonic methods of a repaired area originally
disclosed by radiography or ultrasonic examination may
be performed either before or after postweld heat treatment when postweld heat treatment is performed. The
acceptance standards shall be as in the original examination.
(e) Weld repairs made as a result of radiographic
examination shall be radiographed after welding. The
acceptance standards for porosity and slag inclusion in
welds shall be in accordance with the ASME Boiler and
Pressure Vessel Code, Section VIII, Division 1, UW-51.
8.3.2.2 Surface Examination. All exterior and all
accessible interior surfaces of bodies, bonnets, and
covers shall be given a surface examination. Table 1,
Group 1 materials shall be given either a magnetic
particle examination or a liquid penetrant examination.
Table 1, Groups 2 and 3 materials shall be given a liquid
penetrant examination. Magnetic particle examinations
shall be in accordance with the procedure and acceptance standards of Mandatory Appendix II. Liquid
penetrant examinations shall be in accordance with
the procedure and acceptance standards of Mandatory
Appendix III.
8.3.3 Welded Fabrication. Bodies and bonnets made
by weld assembly of segments of castings, forgings, bars,
tubular products, or plates, or combinations thereof,
12
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
ASME B16.34-2004
K (on same
side as
E and F)
A
B
L M H
( P ) (R )
A
(E )
I
H
C
J
G
D
B
A
C
B
K
G
E
(c) Ball Valve
D
G
A
G J
F
(b) Check Valve
C
B
D (F )
D
C
A
N
(S )
B
C
D
E
F
G
(a) Gate Valve
F
F
A
C
E
G
C F
A
E
E and F
D
F
D E
B
D
D
E
A and B
(d) Angle Valve
G
(e) Globe Valve
GENERAL NOTE: The above sketches represent valves with symmetrical shapes. Sketches are illustrative only and do not
imply design (see para. 6.3.7).
Fig. 1 Method of Designating Location of Auxiliary Connections When Specified
13
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
B
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
T
Connection size
NPS
3
1
3
Minimum effective thread
length, T
mm
10.5
13.5
14.0
⁄8
in.
⁄2
0.41
⁄4
0.53
0.55
1
11⁄4
11⁄2
2
17.3
18.0
18.3
19.3
0.68
0.71
0.72
0.76
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
GENERAL NOTE: The minimum thread lengths are for effective threads in accordance with the effective external pipe thread
length as given in ASME B1.20.1.
Fig. 2 Thread Length for Auxiliary Connections
(See para. 6.3.2)
A
B
1.5 mm (0.06 in.) min
Connection size
Minimum socket depth, A
Minimum socket depth, B
NPS
3
mm
17.53
⁄8
1
3
21.72
27.05
⁄2
⁄4
1
11⁄4
11⁄2
2
33.78
42.54
49.53
61.11
in.
0.690
0.855
1.065
1.330
1.675
1.195
2.406
mm
4.8
4.8
6.4
6.4
6.4
6.4
7.9
in.
0.19
0.19
0.25
0.25
0.25
0.25
0.31
Fig. 3 Socket Welding for Auxiliary Connections
(See para. 6.3.3)
Fig. 4 Butt Welding for Auxiliary Connections
(See para. 6.3.4)
14
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
ASME B16.34-2004
J
Connection size
Nominal Boss dia., J
3
NPS
1
⁄8
3
⁄2
⁄4
1
11⁄4
11⁄2
2
mm
31
38
44
53
63
69
85
in.
1.25
1.50
1.75
2.12
2.50
2.75
3.38
Fig. 5 Bosses for Auxiliary Connections
(See para. 6.3.5)
Typical casting sections showing required radiographic examination
A
X
A
A
210 deg
X
Section X -X
Bonnet
A
GENERAL NOTE: For definition of “A”, see para. 8.3.1.1.
Fig. 6 Gate Body (Pressure Seal Bonnet)
15
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
A
A
X
X
A
A
Section X -X
Bonnet
GENERAL NOTE: For definition of “A”, see para. 8.3.1.1.
Fig. 7 Y Pattern Globe Body (Pressure Seal Bonnet)
A
A
X
A
X
Y
Y
210 deg
A
A
Section X -X and Y -Y
GENERAL NOTE: For definition of “A”, see para. 8.3.1.1.
Fig. 8 Angle Body (Pressure Seal Bonnet)
Bonnet Same As Y Pattern Globe
16
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
A
210 deg
VALVES — FLANGED, THREADED, AND WELDING END
ASME B16.34-2004
A
A
A
X
A
210 deg
X
Section X -X
A
GENERAL NOTE: For definition of “A”, see para. 8.3.1.1.
Fig. 9 Elbow Down (Pressure Seal Bonnet)
A
X
A
A
210 deg
X
Section X -X
Bonnet
A
GENERAL NOTE: For definition of “A”, see para. 8.3.1.1.
Fig. 10 Gate Body (Flanged Bonnet)
17
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
A
X
Y
135 deg
A
135 deg
X
Y
A
Section X -X
Section Y -Y
A
GENERAL NOTE: For definition of “A”, see para. 8.3.1.1.
Fig. 11 Globe Body (Flanged Bonnet)
X
A
A
A
90 deg
90 deg
A
A
A
X
Section X -X
GENERAL NOTE: For definition of “A”, see para. 8.3.1.1.
Fig. 12 Butterfly Body
18
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
A
A
W
ASME B16.34-2004
90 deg
A
W
X
X
Y
Y
Z
Z
A
A
Section W -W and Z-Z
A
90 deg
Section X -X and Y -Y
GENERAL NOTE: For definition of “A”, see para. 8.3.1.1.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Fig. 13 Plug Body
A
X
A
30 deg
30 deg
X
Section X -X
A
GENERAL NOTE: For definition of “A”, see para. 8.3.1.1.
Fig. 14 Conduit Gate Body (Pressure Seal Bonnet)
19
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
A
GENERAL NOTE: For definition of “A”, see para. 8.3.1.1.
Fig. 15 Dished Cover
Fig. 16 Flat Cover
20
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
ASME B16.34-2004
Blind axial hole
Stem bore
n
L
Blind axial hole
other than
flange bolt
holes
m
e
e
t
j
f
d
t
B.C.
g
Relationship
t ≥ tm
m ≥ t′1
n ≥ t′2
e ≥ 0.25 t′
f ≥ 0.25 tm and f + g ≥ tm
g ≥ 0.25 tm and f + g ≥ tm
j ≥ 0.25 tm
d p flow passage dia.
d′ p local dia. in valve body neck
L ≥ tm共1 + 1.1冪d/tm 兲 applies when d/d′ ≥
4
f ′ ≥ 0.25 t′2 and f ′ + g′ ≥ t′2
g′ ≥ 0.25 t′2 and f ′ + g′ ≥ t′2
Notes
Reference
1
1
1 and 2
3
3
3
3
...
...
6.1.1
6.1.3(c)
6.1.3(c)
6.7(d)
6.7(e)
6.7(e)
6.7(f)
6.1.2
6.1.3(c)
...
6.1.3(c)
...
...
6.1.3(d)
6.1.3(d)
NOTES:
(1) Except where para. 6.1.6 applies.
(2) If d′2 is located outside the stem seal, i.e., beyond the internal wetted perimeter, the minimum
thickness requirements shall be determined by the manufacturer.
(3) In no case less than 3 mm (0.1 in.).
Fig. 17 Butterfly Valve Body
21
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
f
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 1
Material Specification List: Applicable ASTM Specification
GROUP 1 MATERIALS
Forgings
Material
Group
No.
1.1
1.2
Nominal
Designation
1.4
Grade
C–Si
C–Mn–Si
A 105
A 350
LF2
31⁄2Ni
C–Mn–Si–V
A 350
A 350
LF3
LF6 Cl. 1
Castings
Spec.
No.
A 216
C–Si
21⁄2Ni
31⁄2Ni
C–Mn–Si
C–Mn–Si–V
1.3
Spec.
No.
70
70
Cl. 1
LC2
LC3
WCC
LCC
A 203
A 203
B
E
A 352
LCB
A
A
A
A
65
A
D
65
A 217
A 352
WC1
LC1
352
352
216
352
WCB
Grade
A 515
A 516
A 537
A
A
A
A
A 350
Grade
Plates
Spec.
No.
Bars
Spec.
No.
A 105
A 350
A 696
Grade
LF2
C
A 675
515
203
203
516
C
A 675
A 675
C–Si
A 515
60
LF1
A 516
60
A 350
A 696
LF1
B
1.5
C–1⁄2Mo
A 182
F1
A 204
A 204
A
B
A 182
F1
1.6
1
A 387
A 387
2 Cl. 1
2 Cl. 2
1.7
C–1⁄2Mo
⁄2Cr–1⁄2Mo
Ni–1⁄2Cr–1⁄2Mo
3
⁄4Ni–Mo–3⁄4Cr
⁄2Cr–1⁄2Mo
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
F2
A 182
A 217
A 217
A 106
C
A 672
B 65
A 672
C 65
A 106
A 672
A 672
B
B 60
C 60
A 691
CM–70
A 691
1
A 691
CM–75
A
A
A
A
691
691
335
369
11⁄4Cr
21⁄4Cr
P22
FP22
A 182
1.10
21⁄4Cr–1Mo
A 182
F22 Cl. 3
1.11
3Cr–1Mo
Mn–1⁄2Mo
Mn–1⁄2Mo–1⁄2Ni
Mn–1⁄2Mo–3⁄4Ni
C–Mn–Si
C–1⁄2Mo
A 182
F21
1.12
5Cr–1⁄2Mo
A
A
A
A
691
335
369
335
5Cr
P5
FP5
P5b
F11 Cl. 2
A 217
WC6
A 217
WC9
F2
A 387
A 387
A 387
12 Cl. 2
11 Cl. 1
22 Cl. 1
A 387
11 Cl. 2
A 182
A 739
F11 Cl. 2
B11
A 387
22 Cl. 2
A 182
A 739
F22 Cl. 3
B22
A
A
A
A
A
A
21 Cl. 2
A&B
C
D
CL2
C
A 182
F21
387
302
302
302
537
204
A 387
A 387
5Cr–1⁄2Mo–Si
5 Cl. 1
5 Cl. 2
22
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
⁄2Cr
WC4
WC5
1Cr–1⁄2Mo
11⁄4Cr–1⁄2Mo–Si
21⁄4Cr–1Mo
11⁄4Cr–1⁄2Mo–Si
11⁄4Cr–1⁄2Mo
1.9
C 70
B 70
60
65
A 350
1.8
A 672
70
C–Mn–Si
A 182
Grade
LF6 Cl. 2
C
C–Si
21⁄2Ni
31⁄2Ni
C–Mn–Si
C–1⁄2Mo
1
Tubular
Spec.
No.
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 1
ASME B16.34-2004
Material Specification List: Applicable ASTM Specification (Cont’d)
GROUP 1 MATERIALS (CONT’D)
Forgings
Material
Group
No.
1.13
Nominal
Designation
1
5Cr– ⁄2Mo
Spec.
No.
A 182
Grade
F5a
Castings
Spec.
No.
A 217
Grade
Spec.
No.
Grade
C5
1.14
9Cr–1Mo
A 182
F9
A 217
C12
1.15
9Cr–1Mo–V
A 182
F91
A 217
C12A
1.16
Plates
Bars
Spec.
No.
A 182
A 387
91 Cl. 2
Grade
A 182
F9
A 182
F91
C– ⁄2Mo
A 387
12 Cl. 1
11⁄4Cr–1⁄2Mo–Si
1.17
1Cr–1⁄2Mo
5Cr–1⁄2Mo
A 182
A 182
F12 Cl. 2
F5
Spec.
No.
Grade
F5a
1
1Cr–1⁄2Mo
Tubular
A 182
F5
A 335
P91
A
A
A
A
A
A
A
335
369
691
335
369
335
369
P1
FP1
1Cr
P12
FP12
P11
FP11
GROUP 2 MATERIALS
2.1
18Cr–8Ni
A 182
A 182
F304
F304H
A 351
A 351
CF3
CF8
A 240
A 240
304
304H
A
A
A
A
182
182
479
479
F304
F304H
304
304H
A
A
A
A
A
A
A
312
312
358
376
376
430
430
TP304
TP304H
304
TP304
TP304H
FP304
FP304H
2.2
16Cr–12Ni–2Mo
A 182
A 182
F316
F316H
A 351
A 351
CF3M
CF8M
A 240
A 240
316
316H
A
A
A
A
182
182
479
479
F316
F316H
316
316H
A
A
A
A
A
A
A
312
312
358
376
376
430
430
TP316
TP316H
316
TP316
TP316H
FP316
FP316H
A 351
CF3A
A 182
A 182
F317
F317H
A 351
A 351
CF8A
CG8M
A 240
A 240
317
317H
A 312
A 312
TP317
TP317H
18Cr–8Ni
A 182
F304L
A 240
304L
A 312
TP304L
16Cr–12Ni–2Mo
A 182
F316L
A 240
316L
A 312
TP316L
2.4
18Cr–10Ni–Ti
A 182
A 182
F321
F321H
A 240
A 240
2.5
18Cr–10Ni–Cb
A
A
A
A
F347
F347H
F348
F348H
A
A
A
A
18Cr–8Ni
18Cr–13Ni–3Mo
19Cr–10Ni–3Mo
2.3
182
182
182
182
240
240
240
240
A
A
A
A
182
479
182
479
F304L
304L
F316L
316L
321
321H
A
A
A
A
182
479
182
479
F321
321
F321H
321H
A
A
A
A
A
A
A
312
312
358
376
376
430
430
TP321
TP321H
321
TP321
TP321H
FP321
FP321H
347
347H
348
348H
A
A
A
A
A
A
A
A
182
182
182
182
479
479
479
479
F347
F347H
F348
F348H
347
347H
348
348H
A
A
A
A
A
A
A
A
A
A
A
312
312
312
312
358
376
376
376
376
430
430
TP347
TP347H
TP348
TP348H
TP347
TP347
TP347H
TP348
TP348H
FP347
FP347H
23
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 1
Material Specification List: Applicable ASTM Specification (Cont’d)
GROUP 2 MATERIALS (CONT’D)
2.6
Nominal
Designation
Spec.
No.
Grade
Castings
Spec.
No.
Grade
Plates
Spec.
No.
Grade
Bars
Spec.
No.
A 240
310H
A 182
A 479
F310H
310H
A 312
A 358
TP310H
310H
A 240
S31254
A 479
S31254
A
A
A
A
A
A
312
358
789
790
789
790
S31254
S31254
S31803
S31803
S32750
S32750
A 789
A 790
S32760
S32760
A 182
F310H
2.8
20Cr–18Ni–6Mo
A 182
F44
22Cr–5Ni–3Mo–N
A 182
F51
A 240
S31803
A 479
S31803
25Cr–7Ni–4Mo–N
A 182
F53
A 240
S32750
A 479
S32750
A 240
S32760
A 240
A 240
309S
310S
2.9
A 351
A 351
A 351
A 182
CE8MN
CD4MCuN
CD3MWCuN
F55
23Cr–12Ni
25Cr–20Ni
2.10
25Cr–12Ni
A 351
A 351
CH8
CH20
2.11
2.12
18Cr–10Ni–Cb
25Cr–20Ni
A 351
A 351
CF8C
CK20
TP309H
309H
309H
25Cr–20Ni
24Cr–10Ni–4Mo–V
25Cr–5Ni–2Mo–3Cu
25Cr–7Ni–3.5Mo–W–Cb
25Cr–7Ni–3.5Mo–N–Cr–W
A 312
A 358
A 240
2.7
CK3MCuN
Grade
Grade
23Cr–12Ni
A 351
Tubular
Spec.
No.
A 479
310S
GROUP 3 MATERIALS
3.1
35Ni–35Fe–20Cr–Cb
B 462 NO8020
B 463 N08020
B 473 N08020
B 464 N08020
B 468 N08020
3.2
99Ni
B 160 N02200
B 162 N02200
B 160 N02200
B 161 N02200
B 163 N02200
3.3
99Ni–Low C
B 160 NO2201
B 162 N02201
B 160 N02201
3.4
67Ni–30Cu
B 164 NO4400
B 127 N04400
B 164 N04400
60Ni–22Cr–9Mo–3.5Cb
67Ni–30Cu–S
B 564 NO4400
B 164 NO4405
72Ni–15Cr–8Fe
B 564 N06600
B 168 N06600
B 166 NO6600
B 167 N06600
B 163 N06600
3.6
33Ni–42Fe–21Cr
B 564 NO8800
B 409 N08800
B 408 N08800
B 163 N08800
3.7
65Ni–28Mo–2Fe
B 333 N10665
B 335 N10665
B 622 N10665
B 333 N10675
B 335 N10675
B 622 N10675
B 575 N10276
B 574 N10276
B 622 N10276
B
B
B
B
B
B
B
B
B
B
B
B
3.5
3.8
B
B
64Ni–29.5Mo–2Cr–2Fe–Mn–W B
B
462
564
462
564
N10665
N10665
N10675
N10675
54Ni–16Mo–15Cr
462
564
564
335
573
574
425
462
564
462
564
N10276
N10276
N06625
N10001
N10003
NO6455
NO8825
NO6022
N06022
NO6200
N06200
60Ni–22Cr–9Mo–3.5Cb
62Ni–28Mo–5Fe
70Ni–16Mo–7Cr–5Fe
61Ni–16Mo–16Cr
42Ni–21.5Cr–3Mo–2.3Cu
55Ni–21Cr–13.5Mo
55Ni–23Cr–16Mo–1.6Cu
B
B
B
B
B
B
B
B
B
B
B
B 165 N04400
B 163 N04400
B 164 NO4405
443
333
434
575
424
575
N06625
N10001
N10003
N06455
N08825
NO6022
446
335
573
574
425
574
N06625
N10001
N10003
N06455
N08825
NO6022
B 622 N06455
B 423 N08825
B 622 NO6022
B 575 N06200
B 574 N06200
B 622 N06200
B 622 N06002
3.9
47Ni–22Cr–9Mo–18Fe
B 572 N06002
B 435 N06002
B 572 N06002
3.10
25Ni–47Fe–21Cr–5Mo
B 672 N08700
B 599 N08700
B 672 N08700
B 622 N10001
24
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Forgings
Material
Group
No.
VALVES — FLANGED, THREADED, AND WELDING END
ASME B16.34-2004
Material Specification List: Applicable ASTM Specification (Cont’d)
Table 1
GROUP 3 MATERIALS (CONT’D)
Forgings
Material
Group
No.
Nominal
Designation
Spec.
No.
Castings
Grade
Spec.
No.
Plates
Spec.
No.
Grade
Grade
Bars
Spec.
No.
Grade
Tubular
Spec.
No.
Grade
3.11
44Fe–25Ni–21Cr–Mo
B 649 N08904
B 625 N08904
B 649 N08904
B 677 N08904
3.12
26Ni–43Fe–22Cr–5Mo
47Ni–22Cr–20Fe–7Mo
46Fe–24Ni–21Cr–6Mo–Cu–N
B 621 N08320
B 581 N06985
B 462 N08367
B 620 N08320
B 582 N06985
B 688 N08367
B 621 N08320
B 581 N06985
B 622 N08320
B 622 N06985
3.13
49Ni–25Cr–18Fe–6Mo
Ni–Fe–Cr–Mo–Cu–Low C
B 581 N06975
B 564 N08031
B 582 N06975
B 625 N08031
B 581 N06975
B 649 N08031
B 622 N06975
B 622 N08031
3.14
47Ni–22Cr–19Fe–6Mo
40Ni–29Cr–15Fe–5Mo
B 581 N06007
B 462 N06030
B 582 N06007
B 582 N06030
B 581 N06007
B 581 N06030
B 622 N06007
B 622 N06030
3.15
33Ni–2Fe–21Cr
Ni–Mo
Ni–Mo–Cr
B 564 N08810
B 409 N08810
B 408 N08810
B 407 N08810
B 536 N08330
B 511 N08330
B 535 N08330
A 351 CN3MN
A 494
A 494
3.16
35Ni–19Cr–11⁄4Si
3.17
1
29Ni–20 ⁄2Cr–3 ⁄2Cu–2 ⁄2Mo
3.18
72Ni–15Cr–8Fe
1
N–12MV
CW–12MW
B 511 N08330
1
A 351
CN7M
B 167 N06600
GROUP 4 MATERIALS
Bolting Materials [Note (1)]
A
A
A
A
A
A
A
A
193
307B
320
354
449
453
540
564
Grade
Notes
Specification Number
(2)(3)
(4)(5)
(2)(3)(6)
651 and 660
630
B
B
B
B
B
B
B
B
B
(7)(8)
(9)
(7)
164
166
335
335
408
473
574
574
637
Grade
N10665
N10675
N10276
N06022
N07718
Notes
(10)(11)(12)
(10)(11)
(10)
(10)
(10)(11)(12)
(10)
(10)
(10)
(10)
GENERAL NOTES:
(a) The user is responsible for assuring that bolting material is not used beyond limits specified in governing codes or regulations.
(b) ASME Boiler and Pressure Vessel Code Section II materials that also meet the requirements of the listed ASTM specification
may also be used.
(c) Material limitations, restrictions, and special requirements are shown on the pressure-temperature tables, Table 2.
NOTES FOR GROUP 4 MATERIALS
(1) Repair welding of bolting material is not permitted.
(2) Where austenitic bolting materials have been carbide solution treated but not strain hardened, they are designated
Class 1 or Class 1A in ASTM A 193. ASTM A 194 nuts of corresponding material are recommended.
(3) Where austenitic bolting materials have been carbide solution treated and strain hardened, they are designated Class
2, 2B, or 2C in ASTM A 193. ASTM A 194 nuts of corresponding material are recommended.
(4) For limitations of usage and strength level, see para. 5.1.2.
(5) Bolts with drilled or undersize heads shall not be used.
(6) For ferritic bolting materials intended for service at low temperature, ASTM A 194 Grade 7 nuts are recommended.
(7) Acceptable nuts for use with quenched and tempered steel bolts are ASTM A 194 Grade 2 and 2H.
(8) Mechanical property requirements for studs shall be the same as for bolts.
(9) Bolting materials suitable for high-temperature service with austenitic stainless steel valve materials.
(10) Nuts may be of the same material or may be of compatible grade of ASTM A 194.
(11) Forging quality not permitted unless the producer last heating or working these parts tests them as required for other
permitted conditions in the same specification and certifies their final tensile, yield, and elongation properties to
equal or exceed the requirements for one of the other permitted conditions.
(12) Maximum operating temperature is arbitrarily set at 260°C (500°F), unless material has been annealed, solution
annealed, or hot finished, because hard temper adversely affects design stress in the creep-rupture temper range.
25
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Specification Number
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
PRESSURE-TEMPERATURE RATINGS
For definition of Standard and Special Classes, see paras. 2.1.1 and 2.1.2. Table 2 follows on pgs. 27 – 90.
NOTE: All pressures are given as gage pressure.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
26
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.1
A 105 (1)(2)
A 216 GR. WCB (1)
A 350 Gr. LF2 (1)
ASME B16.34-2004
Ratings for Group 1.1 Materials
A 515 Gr.70 (1)
A 516 Gr. 70 (1)(3)
A 537 Cl. 1 (5)
A 696 Gr. C
A 350 Gr. LF6 Cl. 1 (4)
A 350 Gr. LF3 (6)
A 672 Gr. B70 (1)
A 672 Gr. C70 (1)
NOTES:
(1) Upon prolonged exposure to temperatures above 425C°, the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged usage above 425°C.
(2) Only killed steel shall be used above 455°C.
(3) Not to be used over 455°C.
(4) Not to be used over 260°C.
(5) Not to be used over 370°C.
(6) Not to be used over 345°C.
A – Standard Class
Working Pressures by Class, bar
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.6
19.2
17.7
15.8
51.1
50.1
46.6
45.1
102.1
100.2
93.2
90.2
153.2
150.4
139.8
135.2
255.3
250.6
233.0
225.4
425.5
417.7
388.3
375.6
765.9
751.9
699.0
676.1
200
250
300
325
13.8
12.1
10.2
9.3
43.8
41.9
39.8
38.7
87.6
83.9
79.6
77.4
131.4
125.8
119.5
116.1
219.0
209.7
199.1
193.6
365.0
349.5
331.8
322.6
657.0
629.1
597.3
580.7
350
375
400
425
8.4
7.4
6.5
5.5
37.6
36.4
34.7
28.8
75.1
72.7
69.4
57.5
112.7
109.1
104.2
86.3
187.8
181.8
173.6
143.8
313.0
303.1
289.3
239.7
563.5
545.5
520.8
431.5
450
475
500
538
4.6
3.7
2.8
1.4
23.0
17.4
11.8
5.9
46.0
34.9
23.5
11.8
69.0
52.3
35.3
17.7
115.0
87.2
58.8
29.5
191.7
145.3
97.9
49.2
345.1
261.5
176.3
88.6
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.8
19.8
19.6
51.7
51.7
51.6
51.0
103.4
103.4
103.3
102.1
155.1
155.1
154.9
153.1
258.6
258.6
258.2
255.2
430.9
430.9
430.3
425.3
775.7
775.7
774.5
765.5
200
250
300
325
19.4
19.4
19.4
19.2
50.6
50.5
50.5
50.1
101.1
101.1
101.1
100.2
151.7
151.6
151.6
150.3
252.9
252.6
252.6
250.6
421.4
421.1
421.1
417.6
758.6
757.9
757.9
751.7
350
375
400
425
18.7
18.1
16.6
13.8
48.9
47.1
43.4
36.0
97.8
94.2
86.8
71.9
146.7
141.3
130.2
107.9
244.6
235.5
217.0
179.8
407.6
392.5
361.7
299.6
733.7
706.5
651.0
539.3
450
475
500
538
11.0
8.4
5.6
2.8
28.8
21.8
14.7
7.4
57.5
43.6
29.4
14.8
86.3
65.4
44.1
22.2
143.8
109.0
73.5
36.9
239.6
181.6
122.4
61.6
431.4
326.9
220.4
110.8
27
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.2
A 106 Gr. C (1)
A 203 Gr. B (2)
Ratings for Group 1.2 Materials
A 203 Gr. B (2)
A 216 Gr. WCC (2)
A 350 Gr. LF6 Cl. 2 (3)
A 352 Gr. LC2 (4)
A 352 Gr. LC3 (4)
A 352 Gr. LCC (4)
NOTES:
(1) Not to be used over 425°C.
(2) Upon prolonged exposure to temperatures above 455°C, the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged usage above 425°C.
(3) Not to be used over 260°C.
(4) Not to be used over 345°C.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.5
17.7
15.8
51.7
51.7
51.5
50.2
103.4
103.4
103.0
100.3
155.1
155.1
154.6
150.5
258.6
258.6
257.6
250.8
430.9
430.9
429.4
418.1
775.7
775.7
773.0
752.6
200
250
300
325
13.8
12.1
10.2
9.3
48.6
46.3
42.9
41.4
97.2
92.7
85.7
82.6
145.8
139.0
128.6
124.0
243.2
231.8
214.4
206.6
405.4
386.2
357.1
344.3
729.7
694.8
642.6
619.6
350
375
400
425
8.4
7.4
6.5
5.5
40.0
37.8
34.7
28.8
80.0
75.7
69.4
57.5
120.1
113.5
104.2
86.3
200.1
189.2
173.6
143.8
333.5
315.3
289.3
239.7
600.3
567.5
520.8
431.5
450
475
500
538
4.6
3.7
2.8
1.4
23.0
17.1
11.6
5.9
46.0
34.2
23.2
11.8
69.0
51.3
34.7
17.7
115.0
85.4
57.9
29.5
191.7
142.4
96.5
49.2
345.1
256.3
173.7
88.6
B – Special Class
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
200
250
300
325
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
350
375
400
425
19.8
19.3
19.3
18.0
51.1
48.4
43.4
36.0
102.2
96.7
86.8
71.9
153.3
145.1
130.2
107.9
255.5
241.9
217.0
179.8
425.8
403.1
361.7
299.6
766.4
725.6
651.0
539.3
450
475
500
538
14.4
10.7
7.2
3.7
28.8
21.4
14.5
7.4
57.5
42.7
29.0
14.8
86.3
64.1
43.4
22.2
143.8
106.8
72.4
36.9
239.6
178.0
120.7
61.6
431.4
320.4
217.2
110.8
28
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.3
A 203 Gr. A (1)
A 203 Gr. D (1)
A 217 Gr. WC1 (2)(3)
ASME B16.34-2004
Ratings for Group 1.3 Materials
A 352 Gr. LCB (4)
A 352 Gr. LC1 (4)
A 515 Gr. 65 (1)
A 516 Gr. 65 (1)(5)
A 675 Gr. 70 (1)(6)(7)
A 672 Gr. B65 (1)
A 672 Gr. C65 (1)
NOTES:
(1) Upon prolonged exposure to temperatures above 425°C, the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged usage above 425°C.
(2) Upon prolonged exposure to temperatures above 470°C, the carbide phase of steel of carbon-molybdenum steel may
be converted to graphite. Permissible, but not recommended for prolonged usage above 470°C.
(3) Use normalized and tempered material only.
(4) Not to be used over 345°C.
(5) Not to be used over 455°C.
(6) Leaded grades shall not be used where welded or in any application above 260°C.
(7) For service temperatures above 455°C, it is recommended that killed steels containing not less than 0.10% residual silicon be used.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
18.4
18.2
17.4
15.8
48.0
47.5
45.3
43.9
96.0
94.9
90.7
87.9
144.1
142.4
136.0
131.8
240.1
237.3
226.7
219.7
400.1
395.6
377.8
366.1
720.3
712.0
680.1
659.1
200
250
300
325
13.8
12.1
10.2
9.3
42.5
40.8
38.7
37.6
85.1
81.6
77.4
75.2
127.6
122.3
116.1
112.7
212.7
203.9
193.4
187.9
354.4
339.8
322.4
313.1
638.0
611.7
580.3
563.7
350
375
400
425
8.4
7.4
6.5
5.5
36.4
35.0
32.6
27.3
72.8
69.9
65.2
54.6
109.2
104.9
97.9
81.9
182.0
174.9
163.1
136.5
303.3
291.4
271.9
227.5
545.9
524.6
489.3
409.5
450
475
500
538
4.6
3.7
2.8
1.4
21.6
15.7
11.1
5.9
43.2
31.3
22.1
11.8
64.8
47.0
33.2
17.7
107.9
78.3
55.4
29.5
179.9
130.6
92.3
49.2
323.8
235.0
166.1
88.6
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
20.0
20.0
48.0
48.0
48.0
48.0
96.0
96.0
96.0
96.0
144.1
144.1
144.1
144.1
240.1
240.1
240.1
240.1
400.1
400.1
400.1
400.1
720.3
720.3
720.3
720.3
200
250
300
325
20.0
20.0
20.0
20.0
48.0
48.0
48.0
48.0
96.0
96.0
96.0
95.9
144.1
144.1
144.1
143.9
240.1
240.1
240.1
239.8
400.1
400.1
400.1
399.6
720.3
720.3
720.3
719.3
350
375
400
425
19.8
19.3
19.3
17.1
47.3
44.9
40.8
34.1
94.6
89.9
81.6
68.3
141.9
134.8
122.3
102.4
236.5
224.7
203.9
170.6
394.1
374.6
339.8
284.4
709.4
674.2
611.7
511.9
450
475
500
538
13.5
9.8
6.9
3.7
27.0
19.6
13.8
7.4
54.0
39.2
27.7
14.8
81.0
58.8
41.5
22.2
134.9
97.9
69.2
36.9
224.9
163.2
115.3
61.6
404.8
293.8
207.6
110.8
29
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.4
A 106 Gr. B (1)
A 350 Gr. LF1 (1)
Ratings for Group 1.4 Materials
A 515 Gr. 60 (1)(2)
A 516 Gr. 60 (1)(2)
A 675 Gr. 60 (1)(2)(3)
A 675 Gr. 65 (1)(3)(4)
A 696 Gr. B
A 672 Gr. B60 (1)
A 672 Gr. C60 (1)
NOTES:
(1) Upon prolonged exposure to temperatures above 425°C, the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged usage above 425°C.
(2) Not to be used over 455°C.
(3) Leaded grades shall not be used where welded or in any application above 260°C.
(4) For service temperatures above 455°C, it is recommended that killed steels containing not less than 0.10% residual silicon be used.
A – Standard Class
Working Pressures by Class, bar
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
16.3
16.0
14.9
14.4
42.6
41.8
38.8
37.6
85.1
83.5
77.7
75.1
127.7
125.3
116.5
112.7
212.8
208.9
194.2
187.8
354.6
348.1
323.6
313.0
638.3
626.6
582.5
563.4
200
250
300
325
13.8
12.1
10.2
9.3
36.4
34.9
33.2
32.2
72.8
69.8
66.4
64.5
109.2
104.7
99.5
96.7
182.1
174.6
165.9
161.2
303.4
291.0
276.5
268.6
546.2
523.7
497.7
483.5
350
375
400
425
8.4
7.4
6.5
5.5
31.2
30.4
29.3
25.8
62.5
60.7
58.7
51.5
93.7
91.1
88.0
77.3
156.2
151.8
146.7
128.8
260.4
253.0
244.5
214.7
468.7
455.3
440.1
386.5
450
475
500
538
4.6
3.7
2.8
1.4
21.4
14.1
10.3
5.9
42.7
28.2
20.6
11.8
64.1
42.3
30.9
17.7
106.8
70.5
51.5
29.5
178.0
117.4
85.9
49.2
320.4
211.4
154.6
88.6
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
17.0
17.0
17.0
17.0
44.3
44.3
44.3
44.3
88.6
88.6
88.6
88.6
133.0
133.0
133.0
133.0
221.6
221.6
221.6
221.6
369.4
369.4
369.4
369.4
664.9
664.9
664.9
664.9
200
250
300
325
17.0
17.0
16.5
16.1
44.3
44.3
43.0
42.0
88.6
88.6
86.0
83.9
133.0
133.0
129.0
125.9
221.6
221.6
215.0
209.9
369.4
369.4
358.3
349.8
664.9
664.9
644.9
629.6
350
375
400
425
15.6
15.2
14.6
12.4
40.7
39.5
38.2
32.3
81.4
79.1
76.3
64.6
122.1
118.6
114.5
96.9
203.4
197.6
190.8
161.5
339.1
329.4
317.9
269.2
610.3
592.9
572.3
484.5
450
475
500
538
10.2
6.8
4.9
2.8
26.7
17.6
12.9
7.4
53.4
35.2
25.8
14.8
80.1
52.9
38.7
22.2
133.5
88.1
64.4
36.9
222.5
146.8
107.4
61.6
400.5
264.3
193.3
110.8
30
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.5
A 182 Gr. F1 (1)
A 204 Gr. A (1)
ASME B16.34-2004
Ratings for Group 1.5 Materials
A 204 Gr. B (1)
A 691 Gr. CM-70 (1)
NOTE:
(1) Upon prolonged exposure to temperatures above 470°C, the carbide phase of steel of carbon-molybdenum steel may
be converted to graphite. Permissible, but not recommended for prolonged usage above 470°C.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
18.4
18.4
17.7
15.8
48.0
48.0
47.9
47.3
96.0
96.0
95.9
94.7
144.1
144.1
143.8
142.0
240.1
240.1
239.7
236.7
400.1
400.1
399.5
394.5
720.3
720.3
719.1
710.1
200
250
300
325
13.8
12.1
10.2
9.3
45.8
44.5
42.9
41.4
91.6
89.0
85.7
82.6
137.4
133.5
128.6
124.0
229.0
222.5
214.4
206.6
381.7
370.9
357.1
344.3
687.1
667.6
642.6
619.6
350
375
400
425
8.4
7.4
6.5
5.5
40.3
38.9
36.5
35.2
80.4
77.6
73.3
70.0
120.7
116.5
109.8
105.1
201.1
194.1
183.1
175.1
335.3
323.2
304.9
291.6
603.3
581.8
548.5
524.7
450
475
500
538
4.6
3.7
2.8
1.4
33.7
31.7
24.1
11.3
67.7
63.4
48.1
22.7
101.4
95.1
72.2
34.0
169.0
158.2
120.3
56.7
281.8
263.9
200.5
94.6
507.0
474.8
361.0
170.2
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
18.4
18.4
18.4
18.4
48.0
48.0
48.0
48.0
96.0
96.0
96.0
96.0
144.1
144.1
144.1
144.1
240.1
240.1
240.1
240.1
400.1
400.1
400.1
400.1
720.3
720.3
720.3
720.3
200
250
300
325
18.4
18.4
18.4
18.4
48.0
48.0
48.0
48.0
96.0
96.0
96.0
96.0
144.1
144.1
144.1
144.1
240.1
240.1
240.1
240.1
400.1
400.1
400.1
400.1
720.3
720.3
720.3
720.3
350
375
400
425
18.4
18.4
18.4
18.4
48.0
48.0
48.0
48.0
96.0
96.0
96.0
96.0
144.1
144.1
144.1
144.1
240.1
240.1
240.1
240.1
400.1
400.1
400.1
400.1
720.3
720.3
720.3
720.3
450
475
500
538
18.1
16.4
11.5
5.4
47.3
42.8
30.1
14.2
94.4
85.5
60.2
28.4
141.4
128.2
90.2
42.6
235.8
213.7
150.4
70.9
393.1
356.3
250.7
118.2
707.6
641.3
451.2
212.8
31
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.6
A 387 Gr. 2 Cl. 1
Ratings for Group 1.6 Materials
A 691 Gr. 1⁄2 Cr
A 387 Gr. 2 Cl. 2
A – Standard Class
Working Pressures by Class, bar
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
15.6
15.6
15.6
15.6
40.6
40.6
40.6
40.6
81.3
81.3
81.3
81.3
121.9
121.9
121.9
121.9
203.1
203.1
203.1
203.1
338.6
338.6
338.6
338.6
609.4
609.4
609.4
609.4
200
250
300
325
13.8
12.1
10.2
9.3
40.6
39.8
38.7
38.1
81.3
79.5
77.3
76.1
121.9
119.3
116.0
114.2
203.1
198.8
193.3
190.3
338.6
331.4
322.1
317.1
609.4
596.4
579.8
570.8
350
375
400
425
8.4
7.4
6.5
5.5
37.4
36.8
36.0
35.1
74.8
73.5
72.0
70.0
112.2
110.3
108.0
105.1
187.1
183.8
179.9
175.1
311.8
306.3
299.9
291.6
561.2
551.4
539.8
524.7
450
475
500
538
4.6
3.7
2.8
1.4
33.7
31.7
25.7
13.9
67.7
63.4
51.3
27.9
101.4
95.1
77.0
41.8
169.0
158.2
128.3
69.7
281.8
263.9
213.9
116.2
507.0
474.8
384.9
209.2
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
...
15.6
15.6
15.6
40.6
40.6
40.6
40.6
81.3
81.3
81.3
81.3
121.9
121.9
121.9
121.9
203.1
203.1
203.1
203.1
338.6
338.6
338.6
338.6
609.4
609.4
609.4
609.4
200
250
300
325
15.6
15.6
15.6
15.6
40.6
40.6
40.6
40.6
81.3
81.3
81.3
81.3
121.9
121.9
121.9
121.9
203.1
203.1
203.1
203.1
338.6
338.6
338.6
338.6
609.4
609.4
609.4
609.4
350
375
400
425
15.6
15.6
15.6
15.6
40.6
40.6
40.6
40.6
81.3
81.3
81.3
81.3
121.9
121.9
121.9
121.9
203.1
203.1
203.1
203.1
338.6
338.6
338.6
338.6
609.4
609.4
609.4
609.4
450
475
500
538
15.6
16.0
12.5
6.7
40.6
41.8
32.6
17.4
81.3
83.7
65.2
34.9
121.9
125.5
97.8
52.3
203.1
209.2
163.1
87.2
338.6
348.6
271.8
145.3
609.4
627.5
489.2
261.5
32
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.7
A 691 Gr. CM 75
ASME B16.34-2004
Ratings for Group 1.7 Materials
A 182 Gr. F2 (1)
A 217 Gr. WC4 (1)(2)
A 217 Gr. WC5 (2)
NOTES:
(1) Not to be used over 538°C.
(2) Use normalized and tempered material only.
A – Standard Class
Working Pressures by Class, bar
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.5
17.7
15.8
51.7
51.7
51.5
50.3
103.4
103.4
103.0
100.3
155.1
155.1
154.6
150.6
258.6
258.6
257.6
250.8
430.9
430.9
429.4
418.2
775.7
775.7
773.0
752.8
200
250
300
325
13.8
12.1
10.2
9.3
48.6
46.3
42.9
41.4
97.2
92.7
85.7
82.6
145.8
139.0
128.6
124.0
243.4
231.8
214.4
206.6
405.4
386.2
357.1
344.3
729.8
694.8
642.6
619.6
350
375
400
425
8.4
7.4
6.5
5.5
40.3
38.9
36.5
35.2
80.4
77.6
73.3
70.0
120.7
116.5
109.8
105.1
201.1
194.1
183.1
175.1
335.3
323.2
304.9
291.6
603.3
581.8
548.5
524.7
450
475
500
538
550
575
4.6
3.7
2.8
1.4
1.4(a)
1.4(a)
33.7
31.7
26.7
13.9
12.6
7.2
67.7
63.4
53.4
27.9
25.2
14.4
101.4
95.1
80.1
41.8
37.8
21.5
169.0
158.2
133.4
69.7
63.0
35.9
281.8
263.9
222.4
116.2
105.0
59.8
507.0
474.8
400.3
209.2
188.9
107.7
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.8
19.8
19.8
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
200
250
300
325
19.8
19.8
19.8
19.8
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
350
375
400
425
19.8
19.3
19.3
19.0
51.5
50.6
50.3
49.6
102.8
101.0
100.6
99.3
154.3
151.5
150.6
148.9
257.1
252.5
251.2
248.2
428.6
420.9
418.3
413.7
771.4
757.4
753.2
744.6
450
475
500
538
550
575
18.1
16.4
12.8
6.7
6.0
3.4
47.3
42.8
33.4
17.4
15.7
9.0
94.4
85.5
66.7
34.9
31.5
17.9
141.4
128.2
100.1
52.3
47.2
26.9
235.8
213.7
166.8
87.2
78.7
44.9
393.1
356.3
278.0
145.3
131.2
74.8
707.6
641.3
500.3
261.5
236.2
134.6
33
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.8
A335 Gr. P22 (1)
A 369 Gr. FP 22 (1)
Ratings for Group 1.8 Materials
A387 Gr. 11 Cl. 1 (1)
A387 Gr. 22 Cl. 1 (1)
A691 Gr. 11⁄4Cr (1)
A387 Gr. 12 Cl. 2(1)
A691 Gr. 21⁄4Cr (1)
NOTE:
(1) Permissible, but not recommended for prolonged use above 595°C.
A – Standard Class
Temperature,
°C
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
16.3
16.1
15.2
14.8
42.6
41.9
39.6
38.6
85.1
83.9
79.2
77.1
127.7
125.8
118.7
115.7
212.8
209.6
197.9
192.9
354.6
349.4
329.8
321.4
638.3
628.9
593.7
578.6
200
250
300
325
13.8
12.1
10.2
9.3
38.2
38.2
38.2
38.2
76.4
76.3
76.3
76.3
114.6
114.5
114.5
114.5
190.9
190.8
190.8
190.8
318.2
317.9
317.9
317.9
572.8
572.3
572.3
572.3
350
375
400
425
8.4
7.4
6.5
5.5
38.0
37.3
36.5
35.2
76.0
74.7
73.3
70.0
114.0
112.0
109.8
105.1
189.9
186.7
183.1
175.1
316.5
311.2
304.9
291.6
569.8
560.2
548.5
524.7
450
475
500
538
4.6
3.7
2.8
1.4
33.7
31.7
25.6
14.9
67.7
63.4
51.3
29.8
101.4
95.1
76.9
44.7
169.0
158.2
128.2
74.5
281.8
263.9
213.7
124.1
507.0
474.8
384.7
223.4
550
575
600
625
650
1.4(a)
1.4(a)
1.4(a)
1.4(a)
1.0(a)
12.7
8.8
6.1
4.0
2.6
25.4
17.6
12.1
8.0
5.2
38.1
26.4
18.2
12.1
7.8
63.5
44.0
30.3
20.1
13.0
105.9
73.4
50.4
33.5
21.7
190.6
132.0
90.8
60.4
39.0
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
17.0
17.0
16.9
16.5
44.3
44.3
44.1
43.0
88.6
88.6
88.2
86.0
133.0
132.9
132.3
129.0
221.6
221.5
220.5
215.0
369.4
369.2
367.5
358.3
664.9
664.6
661.5
644.9
200
250
300
325
16.5
16.5
16.5
16.5
43.0
43.0
43.0
43.0
86.0
86.0
86.0
86.0
129.0
129.0
129.0
129.0
215.0
215.0
215.0
215.0
358.3
358.3
358.3
358.3
644.9
644.9
644.9
644.9
350
375
400
425
16.5
16.7
18.3
17.9
43.0
43.7
47.8
46.6
86.0
87.3
95.6
93.2
129.0
131.0
143.3
139.9
215.0
218.4
238.9
233.1
358.3
363.9
398.2
388.5
644.9
655.1
716.7
699.3
450
475
500
538
17.4
15.9
12.3
7.1
45.5
41.5
32.1
18.6
90.9
83.0
64.1
37.2
136.4
124.5
96.2
55.8
227.3
207.5
160.3
93.1
378.8
345.9
267.1
155.1
681.8
622.5
480.8
279.2
550
575
600
625
650
6.1
4.2
2.9
1.9
1.2
15.9
11.0
7.6
5.0
3.3
31.8
22.0
15.1
10.1
6.5
47.7
33.0
22.7
15.1
9.8
79.4
55.0
37.8
25.1
16.3
132.4
91.7
63.0
41.9
27.1
238.3
165.1
113.5
75.4
48.8
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
34
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
A 182 Gr. F11 Cl. 2 (1)(2)
Ratings for Group 1.9 Materials
A 217 Gr. WC6 (1)(3)
A 387 Gr. 11 Cl. 2 (2)
A 739 Gr. B11 (2)
NOTES:
(1) Use normalized and tempered material only.
(2) Permissible, but not recommended for prolonged use above 595°C.
(3) Not to be used over 595°C.
A – Standard Class
Temperature,
°C
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.5
17.7
15.8
51.7
51.7
51.5
49.7
103.4
103.4
103.0
99.5
155.1
155.1
154.4
149.2
258.6
258.6
257.4
248.7
430.9
430.9
429.0
414.5
775.7
775.7
772.2
746.2
200
250
300
325
13.8
12.1
10.2
9.3
48.0
46.3
42.9
41.4
95.9
92.7
85.7
82.6
143.9
139.0
128.6
124.0
239.8
231.8
214.4
206.6
399.6
386.2
357.1
344.3
719.4
694.8
642.6
619.6
350
375
400
425
8.4
7.4
6.5
5.5
40.3
38.9
36.5
35.2
80.4
77.6
73.3
70.0
120.7
116.5
109.8
105.1
201.1
194.1
183.1
175.1
335.3
323.2
304.9
291.6
603.3
581.8
548.5
524.7
450
475
500
538
4.6
3.7
2.8
1.4
33.7
31.7
25.7
14.9
67.7
63.4
51.5
29.8
101.4
95.1
77.2
44.7
169.0
158.2
128.6
74.5
281.8
263.9
214.4
124.1
507.0
474.8
385.9
223.4
550
575
600
625
650
1.4(a)
1.4(a)
1.4(a)
1.4(a)
1.1(a)
12.7
8.8
6.1
4.3
2.8
25.4
17.6
12.2
8.5
5.7
38.1
26.4
18.3
12.8
8.5
63.5
44.0
30.5
21.3
14.2
105.9
73.4
50.9
35.5
23.6
190.6
132.0
91.6
63.9
42.6
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
B – Special Class
Working Pressures by Class, bar
Temperature
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.8
19.8
19.8
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
200
250
300
325
19.8
19.8
19.8
19.8
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
350
375
400
425
19.8
19.3
19.3
19.0
51.5
50.6
50.3
49.6
102.8
101.0
100.6
99.3
154.3
151.5
150.6
148.9
257.1
252.5
251.2
248.2
428.6
420.9
418.3
413.7
771.4
757.4
753.2
744.6
450
475
500
538
18.1
16.4
12.3
7.1
47.3
42.8
32.2
18.6
94.4
85.5
64.3
37.2
141.4
128.2
96.5
55.8
235.8
213.7
160.8
93.1
393.1
356.3
268.0
155.1
707.6
641.3
482.4
279.2
550
575
600
625
650
6.1
4.2
2.9
2.0
1.4
15.9
11.0
7.6
5.3
3.5
31.8
22.0
15.3
10.6
7.1
47.7
33.0
22.9
16.0
10.6
79.4
55.0
38.2
26.6
17.7
132.4
91.7
63.6
44.4
29.5
238.3
165.1
114.5
79.9
53.2
35
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Table 2-1.9
ASME B16.34-2004
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.10
A 182 Gr. F22 Cl. 3 (1)
Ratings for Group 1.10 Materials
A 217 Gr. WC9 (2)(3)
A 387 Gr. 22 Cl. 2 (1)
A 739 Gr. B22 (2)
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
NOTES:
(1) Permissible, but not recommended for prolonged use above 595°C.
(2) Use normalized and tempered material only.
(3) Not to be used over 595°C.
A – Standard Class
Temperature,
°C
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.5
17.7
15.8
51.7
51.7
51.5
50.3
103.4
103.4
103.0
100.3
155.1
155.1
154.6
150.6
258.6
258.6
257.6
250.8
430.9
430.9
429.4
418.2
775.7
775.7
773.0
752.8
200
250
300
325
13.8
12.1
10.2
9.3
48.6
46.3
42.9
41.4
97.2
92.7
85.7
82.6
145.8
139.0
128.6
124.0
243.4
231.8
214.4
206.6
405.4
386.2
357.1
344.3
729.8
694.8
642.6
619.6
350
375
400
425
8.4
7.4
6.5
5.5
40.3
38.9
36.5
35.2
80.4
77.6
73.3
70.0
120.7
116.5
109.8
105.1
201.1
194.1
183.1
175.1
335.3
323.2
304.9
291.6
603.3
581.8
548.5
524.7
450
475
500
538
4.6
3.7
2.8
1.4
33.7
31.7
28.2
18.4
67.7
63.4
56.5
36.9
101.4
95.1
84.7
55.3
169.0
158.2
140.9
92.2
281.8
263.9
235.0
153.7
507.0
474.8
423.0
276.6
550
575
600
625
650
1.4(a)
1.4(a)
1.4(a)
1.4(a)
1.1(a)
15.6
10.5
6.9
4.5
2.8
31.3
21.1
13.8
8.9
5.7
46.9
31.6
20.7
13.4
8.5
78.2
52.6
34.4
22.3
14.2
130.3
87.7
57.4
37.2
23.6
234.5
157.9
103.3
66.9
42.6
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.8
19.8
19.5
51.7
51.7
51.6
51.0
103.4
103.4
103.2
101.9
155.1
155.1
154.9
152.9
258.6
258.6
258.1
254.8
430.9
430.9
430.2
424.6
775.7
775.7
774.3
764.3
200
250
300
325
19.3
19.2
19.1
19.0
50.2
50.0
49.8
49.6
100.4
100.0
99.6
99.2
150.7
149.9
149.3
148.8
251.1
249.9
248.9
248.0
418.5
416.5
414.8
413.3
753.4
749.7
746.7
743.9
350
375
400
425
18.9
18.7
18.7
18.7
49.2
48.8
48.8
48.8
98.4
97.5
97.5
97.5
147.6
146.3
146.3
146.3
246.0
243.8
243.8
243.8
410.0
406.3
406.3
406.3
738.1
731.3
731.3
731.3
450
475
500
538
18.1
16.4
13.7
8.8
47.3
42.8
35.6
23.0
94.4
85.5
71.5
46.1
141.4
128.2
107.1
69.1
235.8
213.7
178.6
115.2
393.1
356.3
297.5
192.1
707.6
641.3
535.4
345.7
550
575
600
625
650
7.5
5.0
3.3
2.1
1.4
19.5
13.2
8.6
5.6
3.5
39.1
26.3
17.2
11.2
7.1
58.6
39.5
25.8
16.7
10.6
97.7
65.8
43.0
27.9
17.7
162.8
109.7
71.7
46.5
29.5
293.1
197.4
129.1
83.7
53.2
36
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Table 2-1.11
A 182 Gr. F21 (1)
A 204 Gr. C (4)
A 302 Gr. A (2)
ASME B16.34-2004
Ratings for Group 1.11 Materials
A 302 Gr.B (2)
A 302 Gr.C (2)
A 302 Gr.D (2)
A 387 Gr. 21 Cl. 2 (1)
A 537 Cl. 2 (3)
NOTES:
(1) Permissible, but not recommended for prolonged use above 595°C.
(2) Upon prolonged exposure to temperatures above 470°C, the carbide phase of carbon-molybdenum steel may be converted to graphite. Permissible, but not recommended for prolonged use above 538°C.
(3) Not to be used over 370°C.
(4) Upon prolonged exposure to temperatures above 470°C, the carbide phase of steel may be converted to graphite.
Permissible, but not recommended for prolonged usage above 470°C.
A – Standard Class
Temperature,
°C
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
19.5
17.7
15.8
51.7
51.7
51.5
50.3
103.4
103.4
103.0
100.3
155.1
155.1
154.6
150.6
258.6
258.6
257.6
250.8
430.9
430.9
429.4
418.2
775.7
775.7
773.0
752.8
200
250
300
325
13.8
12.1
10.2
9.3
48.6
46.3
42.9
41.4
97.2
92.7
85.7
82.6
145.8
139.0
128.6
124.0
243.4
231.8
214.4
206.6
405.4
386.2
357.1
344.3
729.8
694.8
642.6
619.6
350
375
400
425
8.4
7.4
6.5
5.5
40.3
38.9
36.5
35.2
80.4
77.6
73.3
70.0
120.7
116.5
109.8
105.1
201.1
194.1
183.1
175.1
335.3
323.2
304.9
291.6
603.3
581.8
548.5
524.7
450
475
500
538
4.6
3.7
2.8
1.4
33.7
31.7
23.6
11.3
67.7
63.4
47.1
22.7
101.4
95.1
70.7
34.0
169.0
158.2
117.8
56.7
281.8
263.9
196.3
94.6
507.0
474.8
353.3
170.2
550
575
600
625
650
1.4(a)
1.4(a)
1.4(a)
1.4(a)
1.2(a)
11.3
10.1
7.1
5.3
3.1
22.7
20.1
14.2
10.6
6.1
34.0
30.2
21.3
15.9
9.2
56.7
50.3
35.6
26.5
15.4
94.6
83.8
59.3
44.2
25.6
170.2
150.9
106.7
79.6
46.1
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
37
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.11
A 182 Gr. F21 (1)
A 204 Gr. C (4)
A 302 Gr. A (2)
Ratings for Group 1.11 Materials (Cont’d)
A 302 Gr.B (2)
A 302 Gr.C (2)
A 302 Gr.D (2)
A 387 Gr. 21 Cl. 2 (1)
A 537 Cl. 2 (3)
NOTES:
(1) Permissible, but not recommended for prolonged use above 595°C.
(2) Upon prolonged exposure to temperatures above 470°C, the carbide phase of carbon-molybdenum steel may be converted to graphite. Permissible, but not recommended for prolonged use above 538°C.
(3) Not to be used over 370°C.
(4) Upon prolonged exposure to temperatures above 470°C, the carbide phase of steel may be converted to graphite.
Permissible, but not recommended for prolonged usage above 470°C.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
200
250
300
325
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
350
375
400
425
19.8
19.3
19.3
19.0
51.5
50.6
50.3
49.6
102.8
101.0
100.6
99.3
154.3
151.5
150.6
148.9
257.1
252.5
251.2
248.2
428.6
420.9
418.3
413.7
771.4
757.4
753.2
744.6
450
475
500
538
18.1
16.1
11.3
5.4
47.3
42.1
29.4
14.2
94.4
84.2
58.9
28.4
141.4
126.3
88.3
42.6
235.8
210.5
147.2
70.9
393.1
350.9
245.4
118.2
707.6
631.6
441.6
212.8
550
575
600
625
650
5.5
4.9
3.4
2.5
1.5
14.3
12.8
8.9
6.6
3.8
28.6
25.5
17.8
13.3
7.7
42.9
38.3
26.7
19.9
11.5
71.6
63.9
44.4
33.2
19.2
119.3
106.4
74.1
55.3
32.0
214.7
191.6
133.3
99.6
57.6
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
38
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
ASME B16.34-2004
Table 2-1.12 Ratings for Group 1.12 Materials
A 335 Gr. P5
A 335 Gr. P5b
A 369 Gr. FP5
A 387 Gr. 5 Cl. 1
A 387 Gr. 5 Cl. 2
A 691 Gr. 5Cr
A – Standard Class
Temperature,
°C
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
16.3
16.0
14.7
14.2
42.6
41.6
38.3
37.0
85.1
83.3
76.5
74.0
127.7
124.9
114.8
111.0
212.8
208.2
191.3
185.1
354.6
347.0
318.9
308.4
638.3
624.7
574.0
555.2
200
250
300
325
13.8
12.1
10.2
9.3
36.6
36.4
35.9
35.6
73.3
72.7
71.8
71.2
109.9
109.1
107.7
106.8
183.1
181.8
179.5
178.0
305.2
303.0
299.2
296.6
549.4
545.4
538.5
534.0
350
375
400
425
8.4
7.4
6.5
5.5
35.2
34.6
33.9
32.8
70.4
69.3
67.7
65.7
105.5
103.9
101.6
98.5
175.9
173.2
169.3
164.2
293.2
288.6
282.1
273.6
527.7
519.5
507.8
492.5
450
475
500
538
4.6
3.7
2.8
1.4
31.7
27.3
21.4
13.7
63.4
54.5
42.8
27.4
95.1
81.8
64.1
41.1
158.5
136.3
106.9
68.6
264.1
227.1
178.2
114.3
475.4
408.8
320.7
205.7
550
575
600
625
650
1.4(a)
1.4(a)
1.4(a)
1.4(a)
0.9(a)
12.0
8.9
6.2
4.0
2.4
24.1
17.8
12.5
8.0
4.7
36.1
26.7
18.7
12.0
7.1
60.2
44.4
31.2
20.0
11.8
100.4
74.0
51.9
33.3
19.7
180.7
133.3
93.5
59.9
35.5
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
17.0
17.0
16.9
16.5
44.3
44.3
44.1
42.9
88.6
88.6
88.2
85.8
133.0
132.9
132.3
128.7
221.6
221.5
220.5
214.6
369.4
369.2
367.4
357.6
664.9
664.6
661.4
643.7
200
250
300
325
16.3
16.3
16.1
16.0
42.6
42.5
42.1
41.7
85.3
85.0
84.1
83.3
127.9
127.5
126.2
125.0
213.2
212.5
210.3
208.3
355.4
354.2
350.4
347.2
639.7
637.5
630.8
624.9
350
375
400
425
15.7
15.5
15.5
15.5
41.0
40.3
40.3
40.3
82.0
80.7
80.7
80.7
123.0
121.0
121.0
121.0
205.0
201.7
201.7
201.7
341.7
336.1
336.1
336.1
615.1
605.0
605.0
605.0
450
475
15.5
13.2
40.3
34.3
80.7
68.6
121.0
103.0
201.7
171.6
336.1
286.0
605.0
514.8
500
538
550
575
600
625
650
10.2
6.6
5.8
4.3
3.0
1.9
1.1
26.7
17.1
15.1
11.1
7.8
5.0
3.0
53.4
34.3
30.1
22.2
15.6
10.0
5.9
80.2
51.4
45.2
33.3
23.4
15.0
8.9
133.6
85.7
75.3
55.5
38.9
24.9
14.8
222.7
142.8
125.5
92.5
64.9
41.6
24.6
400.9
257.1
225.9
166.6
116.8
74.8
44.3
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
39
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.13
A 182 Gr. F5a
Ratings for Group 1.13 Materials
A 217 Gr. C5 (1)
NOTE:
(1) Use normalized and tempered material only.
A – Standard Class
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
19.5
17.7
15.8
51.7
51.7
51.5
50.3
103.4
103.4
103.0
100.3
155.1
155.1
154.6
150.6
258.6
258.6
257.6
250.8
430.9
430.9
429.4
418.2
775.7
775.7
773.0
752.8
200
250
300
325
13.8
12.1
10.2
9.3
48.6
46.3
42.9
41.4
97.2
92.7
85.7
82.6
145.8
139.0
128.6
124.0
243.4
231.8
214.4
206.6
405.4
386.2
357.1
344.3
729.8
694.8
642.6
619.6
350
375
400
425
8.4
7.4
6.5
5.5
40.3
38.9
36.5
35.2
80.4
77.6
73.3
70.0
120.7
116.5
109.8
105.1
201.1
194.1
183.1
175.1
335.3
323.2
304.9
291.6
603.3
581.8
548.5
524.7
450
475
500
538
4.6
3.7
2.8
1.4
33.7
27.9
21.4
13.7
67.7
55.7
42.8
27.4
101.4
83.6
64.1
41.1
169.0
139.3
106.9
68.6
281.8
232.1
178.2
114.3
507.0
417.8
320.7
205.7
550
575
600
625
650
1.4(a)
1.4(a)
1.4(a)
1.4(a)
0.9(a)
12.0
8.9
6.2
4.0
2.4
24.1
17.8
12.5
8.0
4.7
36.1
26.7
18.7
12.0
7.1
60.2
44.4
31.2
20.0
11.8
100.4
74.0
51.9
33.3
19.7
180.7
133.3
93.5
59.9
35.5
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
200
250
300
325
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
350
375
400
425
19.8
19.3
19.3
19.0
51.5
50.6
50.3
49.6
102.8
101.0
100.6
99.3
154.3
151.5
150.6
148.9
257.1
252.5
251.2
248.2
428.6
420.9
418.3
413.7
771.4
757.4
753.2
744.6
450
475
500
538
18.1
16.4
13.4
8.6
45.2
34.8
26.7
17.1
90.3
69.6
53.4
34.3
135.5
104.5
80.2
51.4
225.9
174.1
133.6
85.7
376.5
290.2
222.7
142.8
677.6
522.3
400.9
257.1
550
575
600
625
650
7.5
5.6
3.9
2.5
1.5
15.1
11.1
7.8
5.0
3.0
30.1
22.2
15.6
10.0
5.9
45.2
33.3
23.4
15.0
8.9
75.3
55.5
38.9
24.9
14.8
125.5
92.5
64.9
41.6
24.6
225.9
166.6
116.8
74.8
44.3
40
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°C
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.14
A 182 Gr. F9
ASME B16.34-2004
Ratings for Group 1.14 Materials
A 217 Gr. C12 (1)
NOTE:
(1) Use normalized and tempered material only.
A – Standard Class
Temperature,
°C
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
19.5
17.7
15.8
51.7
51.7
51.5
50.3
103.4
103.4
103.0
100.3
155.1
155.1
154.6
150.6
258.6
258.6
257.6
250.8
430.9
430.9
429.4
418.2
775.7
775.7
773.0
752.8
200
250
300
325
13.8
12.1
10.2
9.3
48.6
46.3
42.9
41.4
97.2
92.7
85.7
82.6
145.8
139.0
128.6
124.0
243.4
231.8
214.4
206.6
405.4
386.2
357.1
344.3
729.8
694.8
642.6
619.6
350
375
400
425
8.4
7.4
6.5
5.5
40.3
38.9
36.5
35.2
80.4
77.6
73.3
70.0
120.7
116.5
109.8
105.1
201.1
194.1
183.1
175.1
335.3
323.2
304.9
291.6
603.3
581.8
548.5
524.7
450
475
500
538
4.6
3.7
2.8
1.4
33.7
31.7
28.2
17.5
67.7
63.4
56.5
35.0
101.4
95.1
84.7
52.5
169.0
158.2
140.9
87.5
281.8
263.9
235.0
145.8
507.0
474.8
423.0
262.4
550
575
600
625
650
1.4(a)
1.4(a)
1.4(a)
1.4(a)
1.4(a)
15.0
10.5
7.2
5.0
3.5
30.0
20.9
14.4
9.9
7.1
45.0
31.4
21.5
14.9
10.6
75.0
52.3
35.9
24.8
17.7
125.0
87.1
59.8
41.4
29.5
225.0
156.8
107.7
74.5
53.2
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
B – Special Class
Working Pressures by Class, bar
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
200
250
300
325
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
350
375
400
425
19.8
19.3
19.3
19.0
51.5
50.6
50.3
49.6
102.8
101.0
100.6
99.3
154.3
151.5
150.6
148.9
257.1
252.5
251.2
248.2
428.6
420.9
418.3
413.7
771.4
757.4
753.2
744.6
450
475
500
538
18.1
16.4
13.7
8.4
47.3
42.8
35.6
21.9
94.4
85.5
71.5
43.7
141.4
128.2
107.1
65.6
235.8
213.7
178.6
109.3
393.1
356.3
297.5
182.2
707.6
641.3
535.4
328.0
550
575
600
625
650
7.2
5.0
3.4
2.4
1.7
18.7
13.1
9.0
6.2
4.4
37.5
26.1
17.9
12.4
8.9
56.2
39.2
26.9
18.6
13.3
93.7
65.3
44.9
31.1
22.2
156.2
108.9
74.8
51.8
36.9
281.2
196.0
134.6
93.2
66.5
41
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.15
A182 F91
Ratings for Group 1.15 Materials
A217 C12A
A387 91 Cl. 2
A335 P91
A – Standard Class
Temperature,
°C
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
20.0
19.5
17.7
15.8
51.7
51.7
51.5
50.3
103.4
103.4
103.0
100.3
155.1
155.1
154.6
150.6
258.6
258.6
257.6
250.8
430.9
430.9
429.4
418.2
775.7
775.7
773.0
752.8
200
250
300
325
13.8
12.1
10.2
9.3
48.6
46.3
42.9
41.4
97.2
92.7
85.7
82.6
145.8
139.0
128.6
124.0
243.4
231.8
214.4
206.6
405.4
386.2
357.1
344.3
729.8
694.8
642.6
619.6
350
375
400
425
8.4
7.4
6.5
5.5
40.3
38.9
36.5
35.2
80.4
77.6
73.3
70.0
120.7
116.5
109.8
105.1
201.1
194.1
183.1
175.1
335.3
323.2
304.9
291.6
603.3
581.8
548.5
524.7
450
475
500
538
4.6
3.7
2.8
1.4
33.7
31.7
28.2
25.2
67.7
63.4
56.5
50.0
101.4
95.1
84.7
75.2
169.0
158.2
140.9
125.5
281.8
263.9
235.0
208.9
507.0
474.8
423.0
375.8
550
575
600
625
650
1.4(a)
1.4(a)
1.4(a)
1.4(a)
1.4(a)
25.0
24.0
19.5
14.6
9.9
49.8
47.9
39.0
29.2
19.9
74.8
71.8
58.5
43.8
29.8
124.9
119.7
97.5
73.0
49.6
208.0
199.5
162.5
121.7
82.7
374.2
359.1
292.5
219.1
148.9
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
−29 to 38
50
100
150
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
B – Special Class
Working Pressures by Class, bar
Temperature
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
200
250
300
325
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
350
375
400
425
19.8
19.3
19.3
19.0
51.5
50.6
50.3
49.6
102.8
101.0
100.6
99.3
154.3
151.5
150.6
148.9
257.1
252.5
251.2
248.2
428.6
420.9
418.3
413.7
771.4
757.4
753.2
744.6
450
475
500
538
18.1
16.4
13.7
11.0
47.3
42.8
35.6
29.0
94.4
85.5
71.5
57.9
141.4
128.2
107.1
86.9
235.8
213.7
178.6
145.1
393.1
356.3
297.5
241.7
707.6
641.3
535.4
435.1
550
575
600
625
650
11.0
10.9
9.3
7.0
4.8
29.0
28.6
24.4
18.3
12.4
57.9
57.1
48.7
36.5
24.8
86.9
85.7
73.1
54.8
37.2
145.1
143.0
121.9
91.3
62.1
241.7
238.3
203.1
152.1
103.4
435.1
428.8
365.6
273.8
186.2
42
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.16
A 335 Gr. P1 (1)(2)
A 335 Gr. P11 (3)
ASME B16.34-2004
Ratings for Group 1.16 Materials
A 335 Gr. P12 (3)
A 369 Gr. FP1 (1)(2)
A 369 Gr. FP11(3)
A 369 Gr. FP12 (3)
A 387 Gr. 12 Cl. 1 (3)
A 691 Gr. 1Cr (3)(4)
NOTES:
(1) Upon prolonged exposure to temperatures above 470°C, the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged usage above 470°C.
(2) Not to be used over 538°C.
(3) Permissible, but not recommended for prolonged use above 595°C.
(4) Use normalized and tempered material only.
A – Standard Class
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
15.6
15.5
15.0
14.3
40.6
40.3
39.1
37.3
81.3
80.7
78.1
74.5
121.9
121.0
117.2
111.8
203.1
201.7
195.3
186.4
338.6
336.1
325.4
310.6
609.4
605.0
585.8
559.1
200
250
300
325
13.8
12.1
10.2
9.3
36.0
34.8
33.7
33.1
72.0
69.7
67.4
66.3
108.0
104.5
101.1
99.4
180.0
174.2
168.4
165.7
300.0
290.3
280.7
276.2
540.0
522.6
505.3
497.1
350
375
400
425
8.4
7.4
6.5
5.5
32.6
32.0
31.5
30.7
65.2
64.0
62.9
61.4
97.8
95.9
94.4
92.1
163.0
159.9
157.3
153.4
271.6
266.5
262.1
255.7
488.9
479.6
471.8
460.3
450
475
500
538
4.6
3.7
2.8
1.4
29.9
29.2
22.8
11.3
59.8
58.3
45.6
22.7
89.8
87.5
68.5
34.0
149.6
145.8
114.1
56.7
249.3
243.0
190.2
94.6
448.8
437.3
342.3
170.2
550
575
600
625
650
1.4(a)
1.4(a)
1.4(a)
1.4(a)
1.0(a)
10.7
8.8
6.1
4.0
2.6
21.4
17.6
12.1
8.0
5.2
32.2
26.4
18.2
12.1
7.8
53.6
44.0
30.3
20.1
13.0
89.4
73.4
50.4
33.5
21.7
160.8
132.0
90.8
60.4
39.0
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
43
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°C
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.16
A 335 Gr. P1 (1)(2)
A 335 Gr. P11 (2)
Ratings for Group 1.16 Materials (Cont’d)
A 335 Gr. P12 (3)
A 369 Gr. FP1 (1)(2)
A 369 Gr. FP11(3)
A 369 Gr. FP12 (3)
A 387 Gr. 12 Cl. 1 (3)
A 691 Gr. 1Cr (3)(4)
NOTES:
(1) Upon prolonged exposure to temperatures above 470°C, the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged usage above 470°C.
(2) Not to be used over 538°C.
(3) Permissible, but not recommended for prolonged use above 595°C.
(4) Use normalized and tempered material only.
B – Special Class
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
15.6
15.5
15.3
15.0
40.6
40.5
39.8
39.1
81.3
80.9
79.6
78.2
121.9
121.4
119.4
117.2
203.1
202.3
199.0
195.4
338.6
337.2
331.6
325.7
609.4
607.0
596.9
586.2
200
250
300
325
15.0
15.0
15.0
15.0
39.1
39.1
39.1
39.1
78.2
78.2
78.2
78.2
117.2
117.2
117.2
117.2
195.4
195.4
195.4
195.4
325.7
325.7
325.7
325.7
586.2
586.2
586.2
586.2
350
375
400
425
15.0
15.0
15.0
15.0
39.1
39.1
39.1
39.1
78.2
78.2
78.2
78.2
117.2
117.2
117.2
117.2
195.4
195.4
195.4
195.4
325.7
325.7
325.7
325.7
586.2
586.2
586.2
586.2
450
475
500
538
15.0
14.8
11.3
5.4
39.1
38.7
29.4
14.2
78.2
77.4
58.8
28.4
117.2
116.2
88.2
42.6
195.4
193.6
147.0
70.9
325.7
322.7
245.0
118.2
586.2
580.8
441.0
212.8
550
575
600
625
650
5.3
4.4
2.9
1.9
1.2
13.8
11.6
7.6
5.0
3.3
27.6
23.2
15.1
10.1
6.5
41.4
34.8
22.7
15.1
9.8
69.0
57.9
37.8
25.1
16.3
114.9
96.6
63.0
41.9
27.1
206.9
173.8
113.5
75.4
48.8
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°C
44
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-1.17
A 182 Gr. F12 Cl. 2 (1)(2)
ASME B16.34-2004
Ratings for Group 1.17 Materials
A 182 Gr. F5
NOTES:
(1) Use normalized and tempered material only.
(2) Permissible, but not recommended for prolonged use above 595°C.
A – Standard Class
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°C
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.5
17.7
15.8
51.7
51.5
50.4
48.2
103.4
103.0
100.9
96.4
155.1
154.5
151.3
144.5
258.6
257.5
252.2
240.9
430.9
429.2
420.4
401.5
775.7
772.5
756.7
722.7
200
250
300
325
13.8
12.1
10.2
9.3
46.3
44.8
42.9
41.4
92.5
89.6
85.7
82.6
138.8
134.5
128.6
124.0
231.3
224.1
214.4
206.6
385.6
373.5
357.1
344.3
694.0
672.3
642.6
619.6
350
375
400
425
8.4
7.4
6.5
5.5
40.3
38.9
36.5
35.2
80.4
77.6
73.3
70.0
120.7
116.5
109.8
105.1
201.1
194.1
183.1
175.1
335.3
323.2
304.9
291.6
603.3
581.8
548.5
524.7
450
475
500
538
4.6
3.7
2.8
1.4
33.7
27.9
21.4
13.7
67.7
55.7
42.8
27.4
101.4
83.6
64.1
41.1
169.0
139.3
106.9
68.6
281.8
232.1
178.2
114.3
507.0
417.8
320.7
205.7
550
575
600
625
650
1.4(a)
1.4(a)
1.4(a)
1.4(a)
0.9(a)
12.0
8.8
6.1
4.0
2.4
24.1
17.6
12.1
8.0
4.7
36.1
26.4
18.2
12.0
7.1
60.2
44.0
30.3
20.0
11.8
100.4
73.4
50.4
33.3
19.7
180.7
132.0
90.8
59.9
35.5
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.7
19.4
19.1
51.7
51.5
50.6
49.7
103.4
103.0
101.3
99.4
155.1
154.5
151.9
149.1
258.6
257.5
253.1
248.6
430.9
429.2
421.9
414.3
775.7
772.5
759.4
745.7
200
250
300
325
19.1
19.0
18.8
18.6
49.7
49.6
49.0
48.6
99.4
99.2
98.1
97.2
149.1
148.8
147.1
145.7
248.6
248.0
245.2
242.9
414.3
413.3
408.6
404.8
745.7
743.9
735.5
728.7
350
375
400
425
18.3
18.0
18.0
18.0
47.8
47.1
47.1
47.1
95.7
94.1
94.1
94.1
143.5
141.2
141.2
141.2
239.2
235.3
235.3
235.3
398.7
392.1
392.1
392.1
717.6
705.9
705.9
705.9
450
475
500
538
16.5
13.3
10.2
6.6
43.0
34.8
26.7
17.1
86.0
69.6
53.4
34.3
129.1
104.5
80.2
51.4
215.1
174.1
133.6
85.7
358.5
290.2
222.7
142.8
645.3
522.3
400.9
257.1
550
575
600
625
650
5.8
4.2
2.9
1.9
1.1
15.1
11.0
7.6
5.0
3.0
30.1
22.0
15.1
10.0
5.9
45.2
33.0
22.7
15.0
8.9
75.3
55.0
37.8
24.9
14.8
125.5
91.7
63.0
41.6
24.6
225.9
165.1
113.5
74.8
44.3
45
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.1
A
A
A
A
182
182
240
240
Gr.
Gr.
Gr.
Gr.
F304 (1)
F304H
304 (1)
304H
A
A
A
A
312
312
351
351
Gr.
Gr.
Gr.
Gr.
Ratings for Group 2.1 Materials
TP304 (1)
TP304H
CF3 (2)
CF8 (1)
A
A
A
A
358
376
376
430
Gr.
Gr.
Gr.
Gr.
304 (1)
TP304 (1)
TP304H
FP304 (1)
A 430 Gr. FP304H
A 479 Gr. 304 (1)
A 479 Gr. 304H
NOTES:
(1) At temperatures above 538°C, use only when the carbon content is 0.04% or higher.
(2) Not to be used over 425°C.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.0
18.3
15.7
14.2
49.6
47.8
40.9
37.0
99.3
95.6
81.7
74.0
148.9
143.5
122.6
111.0
248.2
239.1
204.3
185.0
413.7
398.5
340.4
308.4
744.6
717.3
612.8
555.1
200
250
300
325
13.2
12.1
10.2
9.3
34.5
32.5
30.9
30.2
69.0
65.0
61.8
60.4
103.4
97.5
92.7
90.7
172.4
162.4
154.6
151.1
287.3
270.7
257.6
251.9
517.2
487.3
463.7
453.3
350
375
400
425
8.4
7.4
6.5
5.5
29.6
29.0
28.4
28.0
59.3
58.1
56.9
56.0
88.9
87.1
85.3
84.0
148.1
145.2
142.2
140.0
246.9
241.9
237.0
233.3
444.4
435.5
426.6
419.9
450
475
500
538
4.6
3.7
2.8
1.4
27.4
26.9
26.5
24.4
54.8
53.9
53.0
48.9
82.2
80.8
79.5
73.3
137.0
134.7
132.4
122.1
228.4
224.5
220.7
203.6
411.1
404.0
397.3
366.4
550
575
600
625
1.4(a)
1.4(a)
1.4(a)
1.4(a)
23.6
20.8
16.9
13.8
47.1
41.7
33.8
27.6
70.7
62.5
50.6
41.4
117.8
104.2
84.4
68.9
196.3
173.7
140.7
114.9
353.4
312.7
253.2
206.8
650
675
700
725
1.4(a)
1.4(a)
1.4(a)
1.4(a)
11.3
9.3
8.0
6.8
22.5
18.7
16.1
13.5
33.8
28.0
24.1
20.3
56.3
46.7
40.1
33.8
93.8
77.9
66.9
56.3
168.9
140.2
120.4
101.3
750
775
800
816
1.4(a)
1.4(a)
1.2(a)
1.0(a)
5.8
4.6
3.5
2.8
11.6
9.0
7.0
5.9
17.3
13.7
10.5
8.6
28.9
22.8
17.4
14.1
48.1
38.0
29.2
23.8
86.7
68.4
52.6
42.7
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
46
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.1
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
A
A
A
A
182
182
240
240
Gr.
Gr.
Gr.
Gr.
F304 (1)
F304H
304 (1)
304H
A
A
A
A
312
312
351
351
Gr.
Gr.
Gr.
Gr.
ASME B16.34-2004
Ratings for Group 2.1 Materials (Cont’d)
TP304 (1)
TP304H
CF3 (2)
CF8 (1)
A
A
A
A
358
376
376
430
Gr.
Gr.
Gr.
Gr.
304 (1)
TP304 (1)
TP304H
FP304 (1)
A 430 Gr. FP304H
A 479 Gr. 304 (1)
A 479 Gr. 304H
NOTES:
(1) At temperatures above 538°C, use only when the carbon content is 0.04% or higher.
(2) Not to be used over 425°C.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.4
17.5
15.8
51.7
50.5
45.6
41.3
103.4
101.0
91.2
82.6
155.1
151.5
136.8
123.9
258.6
252.5
228.0
206.5
430.9
420.8
380.0
344.2
775.7
757.4
683.9
619.6
200
250
300
325
14.8
13.9
13.2
12.9
38.5
36.3
34.5
33.7
77.0
72.5
69.0
67.5
115.4
108.8
103.5
101.2
192.4
181.3
172.5
168.7
320.7
302.2
287.5
281.1
577.2
543.9
517.5
506.0
350
375
400
425
12.7
12.4
12.2
12.0
33.1
32.4
31.7
31.2
66.1
64.8
63.5
62.5
99.2
97.2
95.2
93.7
165.3
162.0
158.7
156.2
275.5
270.0
264.5
260.4
496.0
486.0
476.1
468.7
450
475
500
538
11.7
11.5
11.3
11.0
30.6
30.1
29.6
28.6
61.2
60.1
59.1
57.3
91.8
90.2
88.7
85.9
153.0
150.3
147.8
143.1
254.9
250.5
246.4
238.5
458.9
450.9
443.5
429.4
550
575
600
625
10.9
10.0
8.1
6.6
28.4
26.1
21.1
17.2
56.8
52.1
42.2
34.5
85.1
78.2
63.3
51.7
141.9
130.3
105.5
86.2
236.5
217.2
175.8
143.6
425.7
390.9
316.5
258.5
650
675
700
725
5.4
4.5
4.1
3.5
14.1
11.7
10.7
9.2
28.2
23.4
21.3
18.5
42.2
35.1
32.0
27.7
70.4
58.4
53.3
46.2
117.3
97.4
88.9
77.0
211.2
175.3
160.0
138.6
750
775
800
816
2.8
2.2
1.8
1.4
7.4
5.8
4.4
3.4
14.8
11.4
8.8
7.2
22.1
17.2
13.2
10.7
36.7
28.5
22.0
17.9
61.2
47.6
36.6
29.6
110.3
85.6
65.6
53.1
47
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.2
A
A
A
A
A
A
182
182
182
240
240
240
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
F316 (1)
F316H
F317 (1)
316 (1)
316H
317 (1)
A
A
A
A
A
312
312
312
351
351
Gr.
Gr.
Gr.
Gr.
Gr.
Ratings for Group 2.2 Materials
TP316 (1)
TP316H
TP317 (1)
CF3A (2)
CF3M (3)
A
A
A
A
A
351
351
358
376
376
Gr.
Gr.
Gr.
Gr.
Gr.
CF8A (2)
CF8M (1)
316 (1)
TP316 (1)
TP316H
A
A
A
A
A
430
430
479
479
351
Gr.
Gr.
Gr.
Gr.
Gr.
FP316 (1)
FP316H
316 (1)
316H
CG8M (4)
NOTES:
(1) At temperatures above 538°C, use only when the carbon content is 0.04% or higher.
(2) Not to be used over 345°C.
(3) Not to be used over 455°C.
(4) Not to be used over 538°C.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
19.0
18.4
16.2
14.8
49.6
48.1
42.2
38.5
99.3
96.2
84.4
77.0
148.9
144.3
126.6
115.5
248.2
240.6
211.0
192.5
413.7
400.9
351.6
320.8
744.6
721.7
632.9
577.4
200
250
300
325
13.7
12.1
10.2
9.3
35.7
33.4
31.6
30.9
71.3
66.8
63.2
61.8
107.0
100.1
94.9
92.7
178.3
166.9
158.1
154.4
297.2
278.1
263.5
257.4
534.9
500.6
474.3
463.3
350
375
400
425
8.4
7.4
6.5
5.5
30.3
29.9
29.4
29.1
60.7
59.8
58.9
58.3
91.0
89.6
88.3
87.4
151.6
149.4
147.2
145.7
252.7
249.0
245.3
242.9
454.9
448.2
441.6
437.1
450
475
500
538
4.6
3.7
2.8
1.4
28.8
28.7
28.2
25.2
57.7
57.3
56.5
50.0
86.5
86.0
84.7
75.2
144.2
143.4
140.9
125.5
240.4
238.9
235.0
208.9
432.7
430.1
423.0
375.8
550
575
600
625
1.4(a)
1.4(a)
1.4(a)
1.4(a)
25.0
24.0
19.9
15.8
49.8
47.9
39.8
31.6
74.8
71.8
59.7
47.4
124.9
119.7
99.5
79.1
208.0
199.5
165.9
131.8
374.2
359.1
298.6
237.2
650
675
700
725
1.4(a)
1.4(a)
1.4(a)
1.4(a)
12.7
10.3
8.4
7.0
25.3
20.6
16.8
14.0
38.0
31.0
25.1
21.0
63.3
51.6
41.9
34.9
105.5
86.0
69.8
58.2
189.9
154.8
125.7
104.8
750
775
800
816
1.4(a)
1.4(a)
1.2(a)
1.0(a)
5.9
4.6
3.5
2.8
11.7
9.0
7.0
5.9
17.6
13.7
10.5
8.6
29.3
22.8
17.4
14.1
48.9
38.0
29.2
23.8
87.9
68.4
52.6
42.7
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
−29 to 38
50
100
150
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
48
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.2
A
A
A
A
A
A
182
182
182
240
240
240
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
F316 (1)
F316H
F317(1)
316 (1)
316H
317 (1)
A
A
A
A
A
312
312
312
351
351
Gr.
Gr.
Gr.
Gr.
Gr.
ASME B16.34-2004
Ratings for Group 2.2 Materials (Cont’d)
TP316 (1)
TP316H
TP317 (1)
CF3A (2)
CF3M (3)
A
A
A
A
A
351
351
358
376
376
Gr.
Gr.
Gr.
Gr.
Gr.
CF8A (2)
CF8M (1)
316 (1)
TP316 (1)
TP316H
A
A
A
A
A
430
430
479
479
351
Gr.
Gr.
Gr.
Gr.
Gr.
FP316 (1)
FP316H
316 (1)
316H
CG8M (4)
NOTES:
(1) At temperatures above 538°C, use only when the carbon content is 0.04% or higher.
(2) Not to be used over 345°C.
(3) Not to be used over 538°C.
(4) Not to be used over 455°C.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.5
18.1
16.5
51.7
50.8
47.1
43.0
103.4
101.6
94.2
85.9
155.1
152.5
141.3
128.9
258.6
254.1
235.5
214.8
430.9
423.5
392.4
358.0
775.7
762.3
706.4
644.4
200
250
300
325
15.3
14.3
13.5
13.2
39.8
37.3
35.3
34.5
79.6
74.5
70.6
68.9
119.4
111.8
105.9
103.4
199.0
186.3
176.4
172.3
331.7
310.4
294.1
287.2
597.0
558.8
529.3
517.0
350
375
400
425
13.0
12.8
12.6
12.5
33.8
33.3
32.9
32.5
67.7
66.7
65.7
65.1
101.5
100.0
98.6
97.6
169.2
166.7
164.3
162.6
282.1
277.9
273.8
271.1
507.7
500.2
492.9
487.9
450
475
500
538
12.3
12.3
12.2
11.0
32.2
32.0
31.7
29.0
64.4
64.0
63.4
57.9
96.6
96.0
95.1
86.9
161.0
160.0
158.6
145.1
268.3
266.6
264.3
241.7
482.9
480.0
475.7
435.1
550
575
600
625
11.0
10.9
9.5
7.6
29.0
28.6
24.9
19.8
57.9
57.1
49.8
39.5
86.9
85.7
74.6
59.3
145.1
143.0
124.4
98.8
241.7
238.3
207.3
164.7
435.1
428.8
373.2
296.5
650
675
700
725
6.1
4.9
4.4
3.7
15.8
12.9
11.4
9.5
31.7
25.8
22.8
19.1
47.5
38.7
34.3
28.6
79.1
64.5
57.1
47.7
131.9
107.5
95.2
79.5
237.4
193.5
171.3
143.0
750
775
800
816
2.8
2.2
1.8
1.4
7.4
5.8
4.4
3.4
14.8
11.4
8.8
7.2
22.1
17.2
13.2
10.7
36.7
28.5
22.0
17.9
61.2
47.6
36.6
29.6
110.3
85.6
65.6
53.1
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
49
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.3
A 182 Gr. F304L (1)
A 182 Gr. F316L
Ratings for Group 2.3 Material
A 240 Gr. 304L (1)
A 240 Gr. 316L
A 312 Gr. TP304L (1)
A 312 Gr. TP316L
A 479 Gr. 304L (1)
A 479 Gr. 316L
NOTE:
(1) Not to be used over 425°C.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
15.9
15.3
13.3
12.0
41.4
40.0
34.8
31.4
82.7
80.0
69.6
62.8
124.1
120.1
104.4
94.2
206.8
200.1
173.9
157.0
344.7
333.5
289.9
261.6
620.5
600.3
521.8
470.9
200
250
300
11.2
10.5
10.0
29.2
27.5
26.1
58.3
54.9
52.1
87.5
82.4
78.2
145.8
137.3
130.3
243.0
228.9
217.2
437.3
412.0
391.0
325
350
375
400
425
450
9.3
8.4
7.4
6.5
5.5
4.6
25.5
25.1
24.8
24.3
23.9
23.4
51.0
50.1
49.5
48.6
47.7
46.8
76.4
75.2
74.3
72.9
71.6
70.2
127.4
125.4
123.8
121.5
119.3
117.1
212.3
208.9
206.3
202.5
198.8
195.1
382.2
376.1
371.3
364.6
357.9
351.2
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
−29 to 38
50
100
150
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
17.7
17.1
14.9
13.4
46.2
44.7
38.8
35.0
92.3
89.3
77.7
70.1
138.5
134.0
116.5
105.1
230.9
223.3
194.1
175.2
384.8
372.2
323.6
291.9
692.6
670.0
582.4
525.5
200
250
300
325
12.5
11.8
11.2
10.9
32.5
30.7
29.1
28.4
65.1
61.3
58.2
56.9
97.6
92.0
87.3
85.3
162.7
153.3
145.5
142.2
271.2
255.4
242.4
237.0
488.1
459.8
436.4
426.6
350
375
400
425
450
10.7
10.6
10.4
10.2
10.0
28.0
27.6
27.1
26.6
26.1
56.0
55.2
54.3
53.3
52.3
83.9
82.9
81.4
79.9
78.4
139.9
138.1
135.6
133.1
130.6
233.2
230.2
226.0
221.9
217.7
419.7
414.4
406.9
399.4
391.9
50
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.4
A
A
A
A
182
182
240
240
Gr.
Gr.
Gr.
Gr.
F321 (1)
F321H (2)
321 (1)
321H (2)
ASME B16.34-2004
Ratings for Group 2.4 Materials
A 312 Gr. TP321 (1)
A 312 Gr. TP321H
A 358 Gr. 321 (1)
A 376 Gr. TP321 (1)
A 376 Gr. TP321H
A 430 Gr. FP321 (1)
A 430 Gr. FP321H
A 479 Gr. 321 (1)
A 479 Gr. 321H
NOTES:
(1) Not to be used over 538°C.
(2) At temperatures above 538°C, use only if the material is heat treated by heating to a minimum temperature of 1095°C.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
−29 to 38
50
100
150
19.0
18.6
17.0
15.7
49.6
48.6
44.2
41.0
99.3
97.1
88.5
82.0
148.9
145.7
132.7
122.9
248.2
242.8
221.2
204.9
413.7
404.6
368.7
341.5
744.6
728.3
663.6
614.7
200
250
300
325
13.8
12.1
10.2
9.3
38.3
36.0
34.1
33.3
76.6
72.0
68.3
66.6
114.9
108.1
102.4
99.9
191.5
180.1
170.7
166.5
319.1
300.2
284.6
277.6
574.5
540.4
512.2
499.6
350
375
400
425
8.4
7.4
6.5
5.5
32.6
32.0
31.6
31.1
65.2
64.1
63.2
62.3
97.8
96.1
94.8
93.4
163.0
160.2
157.9
155.7
271.7
266.9
263.2
259.5
489.1
480.5
473.8
467.1
450
475
500
538
4.6
3.7
2.8
1.4
30.8
30.5
28.2
25.2
61.7
61.1
56.5
50.0
92.5
91.6
84.7
75.2
154.2
152.7
140.9
125.5
256.9
254.4
235.0
208.9
462.5
458.0
423.0
375.8
550
575
600
625
650
1.4(a)
1.4(a)
1.4(a)
1.4(a)
1.4(a)
25.0
24.0
20.3
15.8
12.6
49.8
47.9
40.5
31.6
25.3
74.8
71.8
60.8
47.4
37.9
124.9
119.7
101.3
79.1
63.2
208.0
199.5
168.9
131.8
105.4
374.2
359.1
304.0
237.2
189.6
675
700
725
1.4(a)
1.4(a)
1.4(a)
9.9
7.9
6.3
19.8
15.8
12.7
29.6
23.7
19.0
49.4
39.5
31.7
82.3
65.9
52.8
148.1
118.6
95.1
750
775
800
816
1.4(a)
1.4(a)
1.2(a)
1.0(a)
5.0
4.0
3.1
2.6
10.0
8.0
6.3
5.2
15.0
11.9
9.4
7.8
25.0
19.9
15.6
13.0
41.7
33.2
26.1
21.7
75.0
59.7
46.9
39.0
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
51
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Ratings for Group 2.4 Materials (Cont’d)
182
182
240
240
Gr.
Gr.
Gr.
Gr.
F321 (1)
F321H (2)
321 (1)
321H (2)
A 312 Gr. TP321 (1)
A 312 Gr. TP321H
A 358 Gr. 321 (1)
A 376 Gr. TP321 (1)
A 376 Gr. TP321H
A 430 Gr. FP321 (1)
A 430 Gr. FP321H
A 479 Gr. 321 (1)
A 479 Gr. 321H
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
A
A
A
A
NOTES:
(1) Not to be used over 538°C.
(2) At temperatures above 538°C, use only if the material is heat treated by heating to a minimum temperature of 1095°C.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.6
18.7
17.5
51.7
51.1
48.7
45.7
103.4
102.3
97.3
91.5
155.1
153.4
146.0
137.2
258.6
255.6
243.3
228.7
430.9
426.0
405.5
381.1
775.7
766.9
729.9
686.0
200
250
300
325
16.4
15.4
14.6
14.3
42.7
40.2
38.1
37.2
85.5
80.4
76.2
74.4
128.2
120.6
114.3
111.5
213.7
201.0
190.6
185.9
356.2
335.0
317.6
309.8
641.1
603.1
571.7
557.6
350
375
400
425
13.9
13.7
13.5
13.3
36.4
35.8
35.3
34.8
72.8
71.5
70.5
69.5
109.2
107.3
105.8
104.3
181.9
178.8
176.3
173.8
303.2
297.9
293.8
289.6
545.8
536.3
528.8
521.3
450
475
500
538
13.2
13.1
12.9
11.0
34.4
34.1
33.7
29.0
68.8
68.2
67.5
57.9
103.2
102.2
101.2
86.9
172.0
170.4
168.7
145.1
286.7
284.0
281.2
241.7
516.1
511.2
506.2
435.1
550
575
600
625
11.0
10.9
9.7
7.6
29.0
28.6
25.3
19.8
57.9
57.1
50.7
39.5
86.9
85.7
76.0
59.3
145.1
143.0
126.6
98.8
241.7
238.3
211.1
164.7
435.1
428.8
379.9
296.5
650
675
700
725
6.1
4.7
4.2
3.4
15.8
12.3
10.8
8.9
31.6
24.7
21.7
17.7
47.4
37.0
32.5
26.6
79.0
61.7
54.2
44.3
131.7
102.9
90.3
73.8
237.0
185.2
162.5
132.9
750
775
800
816
2.6
1.9
1.7
1.2
6.7
5.0
4.4
3.3
13.4
10.0
8.8
6.5
20.0
15.0
13.2
9.8
33.4
25.1
22.0
16.3
55.7
41.8
36.6
27.1
100.2
75.2
65.6
48.8
52
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.5
A
A
A
A
A
A
182
182
182
182
240
240
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
F347 (1)
F347H (2)
F348 (1)
F348H (2)
347 (1)
347H (2)
A
A
A
A
A
A
240
240
312
312
312
312
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
ASME B16.34-2004
Ratings for Group 2.5 Materials
348 (1)
348H (2)
TP347 (1)
TP347H
TP348 (1)
TP348H
A
A
A
A
A
358
376
376
376
376
Gr.
Gr.
Gr.
Gr.
Gr.
347 (1)
TP347 (1)
TP347H
TP348 (1)
TP348H (1)
A
A
A
A
A
A
430
430
479
479
479
479
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
FP347 (1)
FP347H
347 (1)
347H
348 (1)
348H
NOTES:
(1) Not to be used over 538°C.
(2) At temperatures above 538°C, use only if the material is heat treated by heating to a minimum temperature of 1095°C.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.0
18.7
17.4
15.8
49.6
48.8
45.3
42.5
99.3
97.5
90.6
84.9
148.9
146.3
135.9
127.4
248.2
243.8
226.5
212.4
413.7
406.4
377.4
353.9
744.6
731.5
679.4
637.1
200
250
300
325
13.8
12.1
10.2
9.3
39.9
37.8
36.1
35.4
79.9
75.6
72.2
70.7
119.8
113.4
108.3
106.1
199.7
189.1
180.4
176.8
332.8
315.1
300.7
294.6
599.1
567.2
541.3
530.3
350
375
400
425
8.4
7.4
6.5
5.5
34.8
34.2
33.9
33.6
69.5
68.4
67.8
67.2
104.3
102.6
101.7
100.8
173.8
171.0
169.5
168.1
289.6
285.1
282.6
280.1
521.3
513.1
508.6
504.2
450
475
500
538
4.6
3.7
2.8
1.4
33.5
31.7
28.2
25.2
66.9
63.4
56.5
50.0
100.4
95.1
84.7
75.2
167.3
158.2
140.9
125.5
278.8
263.9
235.0
208.9
501.8
474.8
423.0
375.8
550
575
600
625
1.4(a)
1.4(a)
1.4(a)
1.4(a)
25.0
24.0
21.6
18.3
49.8
47.9
42.9
36.6
74.8
71.8
64.2
54.9
124.9
119.7
107.0
91.2
208.0
199.5
178.5
152.0
374.2
359.1
321.4
273.8
650
675
700
725
1.4(a)
1.4(a)
1.4(a)
1.4(a)
14.1
12.4
10.1
7.9
28.1
25.2
20.0
15.4
42.5
37.6
29.8
23.2
70.7
62.7
49.7
38.6
117.7
104.5
83.0
64.4
211.7
187.9
149.4
115.8
750
775
800
816
1.4(a)
1.4(a)
1.2(a)
1.0(a)
5.9
4.6
3.5
2.8
11.7
9.0
7.0
5.9
17.6
13.7
10.5
8.6
29.6
22.8
17.4
14.1
49.1
38.0
29.2
23.8
88.2
68.4
52.6
42.7
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
53
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
A
A
A
A
A
A
182
182
182
182
240
240
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
F347 (1)
F347H (2)
F348 (1)
F348H (2)
347 (1)
347H (2)
A
A
A
A
A
A
240
240
312
312
312
312
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Ratings for Group 2.5 Materials (Cont’d)
348 (1)
348H (2)
TP347 (1)
TP347H
TP348 (1)
TP348H
A
A
A
A
A
358
376
376
376
376
Gr.
Gr.
Gr.
Gr.
Gr.
347 (1)
TP347 (1)
TP347H
TP348 (1)
TP348H (1)
A
A
A
A
A
A
430
430
479
479
479
479
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
FP347 (1)
FP347H
347 (1)
347H
348 (1)
348H
NOTES:
(1) Not to be used over 538°C.
(2) At temperatures above 538°C, use only if the material is heat treated by heating to a minimum temperature of 1095°C.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
19.4
18.2
51.7
51.7
50.6
47.4
103.4
103.4
101.1
94.8
155.1
155.1
151.7
142.2
258.6
258.6
252.8
237.0
430.9
430.9
421.3
395.0
775.7
775.7
758.3
711.0
200
250
300
325
17.1
16.2
15.4
15.1
44.6
42.2
40.3
39.5
89.1
84.4
80.6
78.9
133.7
126.6
120.8
118.4
222.9
211.0
201.4
197.3
371.5
351.7
335.6
328.8
668.6
633.0
604.1
591.8
350
375
400
425
14.9
14.6
14.5
14.4
38.8
38.2
37.8
37.5
77.6
76.4
75.7
75.0
116.4
114.5
113.5
112.5
194.0
190.9
189.2
187.6
323.3
318.1
315.4
312.6
581.9
572.7
567.7
562.7
450
475
500
538
14.3
14.3
13.7
11.0
37.3
37.3
35.6
29.0
74.7
74.6
71.5
57.9
112.0
111.9
107.1
86.9
186.7
186.5
178.6
145.1
311.1
310.9
297.5
241.7
560.0
559.6
535.4
435.1
550
575
600
625
11.0
10.9
10.3
8.7
29.0
28.6
26.9
23.0
57.9
57.1
53.5
45.7
86.9
85.7
80.4
68.6
145.1
143.0
134.0
114.3
241.7
238.3
223.4
190.6
435.1
428.8
401.9
342.8
650
675
700
725
6.9
6.2
4.8
3.7
17.9
16.0
12.4
9.7
35.5
31.6
25.0
19.5
53.1
47.3
37.3
28.9
88.6
78.9
62.3
48.3
147.9
131.7
103.7
80.2
266.1
237.0
186.5
144.5
750
775
800
816
2.8
2.2
1.8
1.4
7.4
5.8
4.4
3.4
14.8
11.4
8.8
7.2
22.1
17.2
13.2
10.7
36.7
28.5
22.0
17.9
61.2
47.6
36.6
29.6
110.3
85.6
65.6
53.1
54
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Table 2-2.5
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.6
A 312 Gr. TP309H
ASME B16.34-2004
Ratings for Group 2.6 Materials
A 240 Gr. 309H
A 358 Gr. 309H
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.0
18.5
16.5
15.3
49.6
48.3
43.1
40.0
99.3
96.6
86.2
80.0
148.9
144.9
129.3
120.0
248.2
241.5
215.5
200.0
413.7
402.5
359.2
333.3
744.6
724.4
646.5
599.9
200
250
300
325
13.8
12.1
10.2
9.3
37.8
36.1
34.8
34.2
75.5
72.1
69.6
68.5
113.3
108.2
104.4
102.7
188.8
180.4
173.9
171.2
314.7
300.6
289.9
285.4
566.4
541.1
521.8
513.7
350
375
400
425
8.4
7.4
6.5
5.5
33.8
33.4
33.1
32.6
67.6
66.8
66.1
65.3
101.4
100.1
99.2
97.9
169.0
166.9
165.4
163.1
281.7
278.2
275.6
271.9
507.0
500.7
496.1
489.4
450
475
500
538
4.6
3.7
2.8
1.4
32.2
31.7
28.2
25.2
64.4
63.4
56.5
50.0
96.5
95.1
84.7
75.2
160.9
158.2
140.9
125.5
268.2
263.9
235.0
208.9
482.7
474.8
423.0
375.8
550
575
600
625
1.4(a)
1.4(a)
1.4(a)
1.4(a)
25.0
22.2
16.8
12.5
49.8
44.4
33.5
25.0
74.8
66.5
50.3
37.5
124.9
110.9
83.9
62.5
208.0
184.8
139.8
104.2
374.2
332.7
251.6
187.6
650
675
700
725
1.4(a)
1.4(a)
1.4(a)
1.4(a)
9.4
7.2
5.5
4.3
18.7
14.5
11.0
8.7
28.1
21.7
16.5
13.0
46.8
36.2
27.5
21.6
78.0
60.3
45.9
36.0
140.4
108.5
82.5
64.9
750
775
800
816
1.3(a)
1.0(a)
0.8(a)
0.7(a)
3.4
2.7
2.1
1.8
6.8
5.4
4.2
3.5
10.2
8.1
6.3
5.3
17.1
13.5
10.5
8.9
28.4
22.4
17.5
14.8
51.2
40.4
31.6
26.6
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
55
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.6
A 312 Gr. TP309H
Ratings for Group 2.6 Materials (Cont’d)
A 240 Gr. 309H
A 358 Gr. 309H
B – Special Class
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
18.4
17.1
51.7
51.7
48.1
44.6
103.4
103.4
96.2
89.3
155.1
155.1
144.3
133.9
258.6
258.6
240.5
223.2
430.9
430.9
400.9
372.0
775.7
775.7
721.6
669.6
200
250
300
325
16.2
15.4
14.9
14.7
42.1
40.3
38.8
38.2
84.3
80.5
77.7
76.5
126.4
120.8
116.5
114.7
210.7
201.3
194.1
191.1
351.2
335.5
323.6
318.5
632.2
603.9
582.4
573.4
350
375
400
425
14.5
14.3
14.2
14.0
37.7
37.3
36.9
36.4
75.5
74.5
73.8
72.8
113.2
111.8
110.7
109.2
188.6
186.3
184.6
182.1
314.4
310.4
307.6
303.5
565.9
558.8
553.7
546.2
450
475
500
538
13.8
13.6
13.4
11.0
35.9
35.4
34.9
29.0
71.8
70.8
69.8
57.9
107.8
106.3
104.8
86.9
179.6
177.1
174.6
145.1
299.3
295.2
291.0
241.7
538.8
531.3
523.8
435.1
550
575
600
625
11.0
10.6
8.0
6.0
29.0
27.7
21.0
15.6
57.9
55.4
41.9
31.3
86.9
83.2
62.9
46.9
145.1
138.6
104.8
78.2
241.7
231.0
174.7
130.3
435.1
415.8
314.5
234.5
650
675
700
725
4.5
3.5
3.0
2.3
11.7
9.0
7.7
6.1
23.4
18.1
15.4
12.1
35.1
27.1
23.2
18.2
58.5
45.2
38.6
30.4
97.5
75.3
64.4
50.6
175.5
135.6
115.9
91.1
750
775
800
816
1.7
1.3
1.1
0.8
4.6
3.4
3.0
2.2
9.1
6.8
5.9
4.4
13.7
10.2
8.9
6.6
22.8
16.9
14.8
11.1
37.9
28.2
24.7
18.5
68.3
50.8
44.5
33.2
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°C
56
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.7
A 182 Gr. F310H
A 240 Gr. 310H
ASME B16.34-2004
Ratings for Group 2.7 Materials
A 312 Gr. TP310H
A 479 Gr. 310H
A 358 Gr. TP310H
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.0
18.5
16.6
15.3
49.6
48.4
43.4
40.0
99.3
96.7
86.8
80.0
148.9
145.1
130.2
120.0
248.2
241.8
217.0
200.0
413.7
403.1
361.6
333.3
744.6
725.5
650.9
599.9
200
250
300
325
13.8
12.1
10.2
9.3
37.6
35.8
34.5
33.9
75.2
71.5
68.9
67.7
112.8
107.3
103.4
101.6
188.0
178.8
172.3
169.3
313.4
298.1
287.2
282.2
564.1
536.5
516.9
507.9
350
375
400
425
8.4
7.4
6.5
5.5
33.3
32.9
32.4
32.1
66.6
65.7
64.8
64.2
99.9
98.6
97.3
96.4
166.5
164.3
162.1
160.6
277.6
273.8
270.2
267.7
499.6
492.9
486.3
481.8
450
475
500
538
4.6
3.7
2.8
1.4
31.7
31.2
28.2
25.2
63.4
62.5
56.5
50.0
95.1
93.7
84.7
75.2
158.4
156.2
140.9
125.5
264.0
260.3
235.0
208.9
475.3
468.6
423.0
375.8
550
575
600
625
1.4(a)
1.4(a)
1.4(a)
1.4(a)
25.0
22.2
16.8
12.5
49.8
44.4
33.5
25.0
74.8
66.5
50.3
37.5
124.9
110.9
83.9
62.5
208.0
184.8
139.8
104.2
374.2
332.7
251.6
187.6
650
675
700
725
1.4(a)
1.4(a)
1.4(a)
1.4(a)
9.4
7.2
5.5
4.3
18.7
14.5
11.0
8.7
28.1
21.7
16.5
13.0
46.8
36.2
27.5
21.6
78.0
60.3
45.9
36.0
140.4
108.5
82.5
64.9
750
775
800
816
1.3(a)
1.0(a)
0.8(a)
0.7(a)
3.4
2.7
2.1
1.8
6.8
5.3
4.1
3.5
10.2
8.0
6.2
5.3
17.1
13.3
10.3
8.9
28.4
22.1
17.2
14.8
51.2
39.8
31.0
26.6
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
57
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.7
A 182 Gr. F310H
A 240 Gr. 310H
Ratings for Group 2.7 Materials (Cont’d)
A 312 Gr. TP310H
A 479 Gr. 310H
A 358 Gr. TP310H
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
18.6
17.1
51.7
51.7
48.4
44.6
103.4
103.4
96.9
89.3
155.1
155.1
145.3
133.9
258.6
258.6
242.2
223.2
430.9
430.9
403.6
371.9
775.7
775.7
726.5
669.5
200
250
300
325
16.1
15.3
14.7
14.5
42.0
39.9
38.5
37.8
83.9
79.8
76.9
75.6
125.9
119.8
115.4
113.4
209.9
199.6
192.3
189.0
349.8
332.7
320.5
314.9
629.6
598.8
576.9
566.9
350
375
400
425
14.2
14.1
13.9
13.7
37.2
36.7
36.2
35.9
74.3
73.3
72.4
71.7
111.5
110.0
108.5
107.6
185.9
183.4
180.9
179.3
309.8
305.6
301.5
298.8
557.6
550.1
542.7
537.8
450
475
500
538
13.6
13.4
13.2
11.0
35.4
34.9
34.4
29.0
70.7
69.7
68.7
57.9
106.1
104.6
103.1
86.9
176.8
174.3
171.8
145.1
294.7
290.5
286.4
241.7
530.4
523.0
515.5
435.1
550
575
600
625
650
675
700
725
11.0
10.6
8.0
6.0
4.5
3.5
3.0
2.3
29.0
27.7
21.0
15.6
11.7
9.0
7.7
6.1
57.9
55.4
41.9
31.3
23.4
18.1
15.4
12.1
86.9
83.2
62.9
46.9
35.1
27.1
23.2
18.2
145.1
138.6
104.8
78.2
58.5
45.2
38.6
30.4
241.7
231.0
174.7
130.3
97.5
75.3
64.4
50.6
435.1
415.8
314.5
234.5
175.5
135.6
115.9
91.1
750
775
800
816
1.7
1.3
1.1
0.8
4.6
3.3
2.9
2.2
9.1
6.7
5.8
4.4
13.7
10.0
8.6
6.6
22.8
16.7
14.4
11.1
37.9
27.9
24.0
18.5
68.3
50.1
43.2
33.2
58
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
A
A
A
A
A
A
182
182
182
182
312
358
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
F44
F51 (1)
F55
F53 (1)
31254
S31254
A
A
A
A
A
A
240
240
240
240
351
479
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Ratings for Group 2.8 Materials
S31803 (1)
S32760 (1)
S31254
S32750 (1)
CK3MCuN
S31803 (1)
A
A
A
A
A
A
479
479
789
789
789
790
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
S31254
S32750
S32750
S32760
S31803
S32750
(1)
(1)
(1)
(1)
(1)
A
A
A
A
A
790
790
351
351
351
Gr. S31803 (1)
Gr. S32760 (1)
Gr.CE8MN (1)
Gr.CD4MCu (1)
Gr.CD3MWCuN (1)
NOTE:
(1) This steel may become brittle after service at moderately elevated temperatures. Not to be used over 315°C.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
19.5
17.7
15.8
51.7
51.7
50.7
45.9
103.4
103.4
101.3
91.9
155.1
155.1
152.0
137.8
258.6
258.6
253.3
229.6
430.9
430.9
422.2
382.7
775.7
775.7
759.9
688.9
200
250
300
325
13.8
12.1
10.2
9.3
42.7
40.5
38.9
38.2
85.3
80.9
77.7
76.3
128.0
121.4
116.6
114.5
213.3
202.3
194.3
190.8
355.4
337.2
323.8
318.0
639.8
606.9
582.8
572.5
350
375
400
8.4
7.4
6.5
37.6
37.4
36.5
75.3
74.7
73.3
112.9
112.1
109.8
188.2
186.8
183.1
313.7
311.3
304.9
564.7
560.3
548.5
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
20.0
19.6
51.7
51.7
51.7
51.3
103.4
103.4
103.4
102.5
155.1
155.1
155.1
153.8
258.6
258.6
258.6
256.3
430.9
430.9
430.9
427.2
775.7
775.7
775.7
768.9
200
250
300
325
18.2
17.3
16.6
16.3
47.6
45.2
43.4
42.6
95.2
90.3
86.7
85.2
142.8
135.5
130.1
127.8
238.0
225.8
216.8
213.0
396.7
376.3
361.4
355.0
714.1
677.4
650.4
638.9
350
375
400
16.1
16.0
15.2
42.0
41.7
39.7
84.0
83.4
79.4
126.1
125.1
119.1
210.1
208.4
198.6
350.2
347.4
330.9
630.3
625.3
595.7
59
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Table 2-2.8
ASME B16.34-2004
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.9
A 240 Gr. 309S (1)(2)(3)
Ratings for Group 2.9 Materials
A 240 Gr. 310S (1)(2)(3)
A 479 Gr. 310S (1)(2)(3)
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
NOTES:
(1) At temperatures above 538°C, use only when the carbon content is 0.04% or higher.
(2) For temperatures above 538°C, use only if the material is solution heat treated to the minimum temperature specified
in the material specification but not lower than 1040°C and quenching in water or rapidly cooling by other means.
(3) This material should be used for service temperatures 515°C and above only when assurance is provided that grain
size is not finer than ASTM 6.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.0
18.5
16.5
15.3
49.6
48.3
43.1
40.0
99.3
96.6
86.2
80.0
148.9
144.9
129.3
120.0
248.2
241.5
215.5
200.0
413.7
402.5
359.2
333.3
744.6
724.4
646.5
599.9
200
250
300
325
13.8
12.1
10.2
9.3
37.6
35.8
34.5
33.9
75.2
71.5
68.9
67.7
112.8
107.3
103.4
101.6
188.0
178.8
172.3
169.3
313.4
298.1
287.2
282.2
564.1
536.5
516.9
507.9
350
375
400
425
8.4
7.4
6.5
5.5
33.3
32.9
32.4
32.1
66.6
65.7
64.8
64.2
99.9
98.6
97.3
96.4
166.5
164.3
162.1
160.6
277.6
273.8
270.2
267.7
499.6
492.9
486.3
481.8
450
475
500
538
4.6
3.7
2.8
1.4
31.7
31.2
28.2
23.4
63.4
62.5
56.5
46.8
95.1
93.7
84.7
70.2
158.4
156.2
140.9
117.0
264.0
260.3
235.0
195.0
475.3
468.6
423.0
351.0
550
575
600
625
1.4(a)
1.4(a)
1.4(a)
1.4(a)
20.5
15.1
11.0
8.1
41.0
30.2
22.1
16.3
61.5
45.3
33.1
24.4
102.5
75.5
55.1
40.7
170.8
125.8
91.9
67.9
307.4
226.4
165.4
122.2
650
675
700
725
1.4(a)
1.4(a)
0.8(a)
0.5(a)
5.8
3.7
2.2
1.4
11.6
7.4
4.3
2.7
17.4
11.1
6.5
4.1
29.1
18.4
10.8
6.8
48.5
30.7
18.0
11.4
87.2
55.3
32.3
20.5
750
775
800
816
0.4(a)
0.3(a)
0.2(a)
0.2(a)
1.0
0.8
0.6
0.5
2.1
1.6
1.2
0.9
3.1
2.5
1.8
1.4
5.2
4.1
3.0
2.4
8.6
6.8
5.0
3.9
15.5
12.3
9.1
7.1
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
60
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.9
A 240 Gr. 309S (1)(2)(3)
ASME B16.34-2004
Ratings for Group 2.9 Materials (Cont’d)
A 240 Gr. 310S (1)(2)(3)
A 479 Gr. 310S (1)(2)(3)
NOTES:
(1) At temperatures above 538°C, use only when the carbon content is 0.04% or higher.
(2) For temperatures above 538°C, use only if the material is solution heat treated to the minimum temperature specified
in the material specification but not lower than 1040°C and quenching in water or rapidly cooling by other means.
(3) This material should be used for service temperatures 515°C and above only when assurance is provided that grain
size is not finer than ASTM 6.
B – Special Class
Working Pressures by Class, bar
Temperature
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
18.4
17.1
51.7
51.7
48.1
44.6
103.4
103.4
96.2
89.3
155.1
155.1
144.3
133.9
258.6
258.6
240.5
223.2
430.9
430.9
400.9
371.9
775.7
775.7
721.6
669.5
200
250
300
325
16.1
15.3
14.7
14.5
42.0
39.9
38.5
37.8
83.9
79.8
76.9
75.6
125.9
119.8
115.4
113.4
209.9
199.6
192.3
189.0
349.8
332.7
320.5
314.9
629.6
598.8
576.9
566.9
350
375
400
425
14.2
14.1
13.9
13.7
37.2
36.7
36.2
35.9
74.3
73.3
72.4
71.7
111.5
110.0
108.5
107.6
185.9
183.4
180.9
179.3
309.8
305.6
301.5
298.8
557.6
550.1
542.7
537.8
450
475
500
538
13.6
13.4
13.2
11.0
35.4
34.9
34.4
29.0
70.7
69.7
68.7
57.9
106.1
104.6
103.1
86.9
176.8
174.3
171.8
145.1
294.7
290.5
286.4
241.7
530.4
523.0
515.5
435.1
550
575
600
625
9.8
7.2
5.3
3.9
25.6
18.9
13.8
10.2
51.2
37.7
27.6
20.4
76.8
56.6
41.3
30.5
128.1
94.3
68.9
50.9
213.4
157.2
114.8
84.9
384.2
283.0
206.7
152.7
650
675
700
725
2.8
1.8
1.3
0.8
7.3
4.6
3.4
2.1
14.5
9.2
6.9
4.2
21.8
13.8
10.3
6.3
36.3
23.0
17.2
10.5
60.6
38.4
28.6
17.6
109.0
69.1
51.5
31.6
750
775
800
816
0.5
0.4
0.3
0.2
1.4
1.0
0.9
0.6
2.7
2.1
1.8
1.2
4.1
3.1
2.7
1.8
6.8
5.2
4.5
3.0
11.3
8.6
7.4
4.9
20.4
15.5
13.4
8.9
61
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.10
A 351 Gr. CH8 (1)
Ratings for Group 2.10 Materials
A 351 Gr. CH20 (1)
NOTE:
(1) At temperatures above 538°C, use only when the carbon content is 0.04% or higher.
A – Standard Class
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
17.8
17.0
14.4
13.4
46.3
44.5
37.5
34.9
92.7
89.0
75.1
69.8
139.0
133.4
112.6
104.7
231.7
222.4
187.7
174.4
386.1
370.6
312.8
290.7
695.0
667.1
563.0
523.3
200
250
300
325
12.9
12.1
10.2
9.3
33.5
32.6
31.7
31.2
67.1
65.2
63.4
62.4
100.6
97.8
95.2
93.6
167.7
163.1
158.6
156.1
279.5
271.8
264.3
260.1
503.2
489.2
475.8
468.2
350
375
400
425
8.4
7.4
6.5
5.5
30.6
29.8
29.1
28.3
61.2
59.7
58.2
56.7
91.7
89.5
87.3
85.0
152.9
149.2
145.5
141.7
254.8
248.6
242.4
236.2
458.7
447.5
436.4
425.2
450
475
500
538
4.6
3.7
2.8
1.4
27.6
26.7
25.8
23.3
55.2
53.5
51.7
46.6
82.8
80.2
77.5
70.0
138.0
133.7
129.2
116.6
230.0
222.8
215.3
194.4
414.0
401.0
387.6
349.9
550
575
600
625
1.4(a)
1.4(a)
1.4(a)
1.4(a)
21.9
18.5
14.5
11.4
43.8
37.0
29.0
22.8
65.7
55.5
43.5
34.3
109.5
92.4
72.6
57.1
182.5
154.0
121.0
95.2
328.5
277.3
217.7
171.3
650
675
700
725
1.4(a)
1.4(a)
1.4(a)
1.4(a)
8.9
7.0
5.7
4.6
17.8
14.0
11.3
9.1
26.7
20.9
17.0
13.7
44.5
34.9
28.3
22.8
74.1
58.2
47.2
38.0
133.5
104.7
85.0
68.4
750
775
800
816
1.3(a)
1.0(a)
0.8(a)
0.7(a)
3.5
2.6
2.0
1.9
7.0
5.1
4.0
3.8
10.5
7.7
6.1
5.7
17.5
12.8
10.1
9.5
29.2
21.4
16.9
15.8
52.5
38.4
30.4
28.4
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
62
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, bar
Temperature,
°C
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.10
A 351 Gr. CH8 (1)
ASME B16.34-2004
Ratings for Group 2.10 Materials (Cont’d)
A 351 Gr. CH20 (1)
NOTE:
(1) At temperatures above 538°C, use only when the carbon content is 0.04% or higher.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
18.4
17.9
16.1
14.9
48.0
46.8
41.9
38.9
96.0
93.5
83.8
77.9
144.1
140.3
125.7
116.8
240.1
233.8
209.5
194.7
400.1
389.6
349.1
324.5
720.3
701.4
628.4
584.0
200
250
300
325
14.4
14.0
13.6
13.4
37.4
36.4
35.4
34.8
74.9
72.8
70.8
69.7
112.3
109.2
106.2
104.5
187.2
182.0
177.0
174.2
312.0
303.3
295.0
290.3
561.6
546.0
531.0
522.6
350
375
400
425
13.1
12.8
12.4
12.1
34.1
33.3
32.5
31.6
68.3
66.6
64.9
63.3
102.4
99.9
97.4
94.9
170.6
166.5
162.3
158.2
284.4
277.5
270.6
263.6
511.9
499.5
487.0
474.5
450
475
500
538
11.8
11.4
11.1
10.5
30.8
29.8
28.8
27.3
61.6
59.7
57.7
54.7
92.4
89.5
86.5
82.0
154.0
149.2
144.2
136.7
256.7
248.6
240.3
227.8
462.1
447.6
432.6
410.0
550
575
600
625
10.1
8.9
7.0
5.5
26.4
23.1
18.1
14.3
52.7
46.2
36.3
28.6
79.1
69.3
54.4
42.8
131.8
115.5
90.7
71.4
219.6
192.6
151.2
119.0
395.4
346.6
272.1
214.2
650
675
700
725
4.3
3.3
3.0
2.4
11.1
8.7
7.7
6.4
22.2
17.5
15.4
12.7
33.4
26.2
23.1
19.1
55.6
43.6
38.6
31.8
92.7
72.7
64.3
53.1
166.8
130.9
115.7
95.5
750
775
800
816
1.8
1.2
1.0
0.9
4.7
3.2
2.7
2.4
9.5
6.5
5.3
4.7
14.2
9.7
8.0
7.1
23.6
16.2
13.3
11.8
39.4
27.0
22.2
19.7
70.9
48.6
40.0
35.5
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
63
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.11
Ratings for Group 2.11 Materials
A 351 Gr. CF8C (1)
NOTE:
(1) At temperatures above 538°C, use only when the carbon content is 0.04% or higher.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.0
18.7
17.4
15.8
49.6
48.8
45.3
42.5
99.3
97.5
90.6
84.9
148.9
146.3
135.9
127.4
248.2
243.8
226.5
212.4
413.7
406.4
377.4
353.9
744.6
731.5
679.4
637.1
200
250
300
325
13.8
12.1
10.2
9.3
39.9
37.8
36.1
35.4
79.9
75.6
72.2
70.7
119.8
113.4
108.3
106.1
199.7
189.1
180.4
176.8
332.8
315.1
300.7
294.6
599.1
567.2
541.3
530.3
350
375
400
425
8.4
7.4
6.5
5.5
34.8
34.2
33.9
33.6
69.5
68.4
67.8
67.2
104.3
102.6
101.7
100.8
173.8
171.0
169.5
168.1
289.6
285.1
282.6
280.1
521.3
513.1
508.6
504.2
450
475
500
538
4.6
3.7
2.8
1.4
33.5
31.7
28.2
25.2
66.9
63.4
56.5
50.0
100.4
95.1
84.7
75.2
167.3
158.2
140.9
125.5
278.8
263.9
235.0
208.9
501.8
474.8
423.0
375.8
550
575
600
625
1.4(a)
1.4(a)
1.4(a)
1.4(a)
25.0
24.0
19.8
13.9
49.8
47.9
39.6
27.7
74.8
71.8
59.4
41.6
124.9
119.7
99.0
69.3
208.0
199.5
165.1
115.5
374.2
359.1
297.1
207.9
650
675
700
1.4(a)
1.4(a)
1.4(a)
10.3
8.0
5.6
20.6
15.9
11.2
30.9
23.9
16.8
51.5
39.8
28.1
85.8
66.3
46.8
154.5
119.4
84.2
725
750
775
800
816
1.4(a)
1.2(a)
0.9(a)
0.8(a)
0.7(a)
4.0
3.1
2.5
2.0
1.9
8.0
6.2
4.9
4.0
3.8
11.9
9.3
7.4
6.1
5.7
19.9
15.5
12.3
10.1
9.5
33.1
25.8
20.4
16.9
15.8
59.6
46.4
36.8
30.4
28.4
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
64
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.11
ASME B16.34-2004
Ratings for Group 2.11 Materials (Cont’d)
A 351 Gr. CF8C (1)
NOTE:
(1) At temperatures above 538°C, use only when the carbon content is 0.04% or higher.
B – Special Class
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.6
18.8
17.4
51.7
51.2
48.9
45.4
103.4
102.4
97.9
90.8
155.1
153.6
146.8
136.1
258.6
256.0
244.7
226.9
430.9
426.7
407.8
378.2
775.7
768.1
734.1
680.7
200
250
300
325
16.5
16.0
15.4
15.1
43.1
41.6
40.2
39.5
86.1
83.3
80.3
78.9
129.2
124.9
120.5
118.4
215.3
208.2
200.9
197.3
358.8
347.0
334.8
328.8
645.8
624.5
602.6
591.8
350
375
400
425
14.9
14.6
14.5
14.4
38.8
38.2
37.8
37.5
77.6
76.4
75.7
75.0
116.4
114.5
113.5
112.5
194.0
190.9
189.2
187.6
323.3
318.1
315.4
312.6
581.9
572.7
567.7
562.7
450
475
500
538
14.3
14.3
13.7
11.0
37.3
37.3
35.6
29.0
74.7
74.6
71.5
57.9
112.0
111.9
107.1
86.9
186.7
186.5
178.6
145.1
311.1
310.9
297.5
241.7
560.0
559.6
535.4
435.1
550
575
600
625
11.0
10.9
9.5
6.6
29.0
28.6
24.8
17.3
57.9
57.1
49.5
34.6
86.9
85.7
74.3
52.0
145.1
143.0
123.8
86.6
241.7
238.3
206.4
144.3
435.1
428.8
371.4
259.8
650
675
700
725
4.9
3.8
3.1
2.3
12.9
9.9
8.2
5.9
25.7
19.9
16.4
11.8
38.6
29.8
24.5
17.7
64.4
49.7
40.9
29.5
107.3
82.9
68.2
49.2
193.1
149.2
122.7
88.5
750
775
800
816
1.6
1.2
1.0
0.9
4.1
3.1
2.7
2.4
8.2
6.2
5.3
4.7
12.2
9.3
8.0
7.1
20.4
15.5
13.3
11.8
34.0
25.8
22.2
19.7
61.2
46.4
40.0
35.5
65
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, bar
Temperature,
°C
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.12
Ratings for Group 2.12 Materials
A 351 Gr. CK20 (1)
NOTE:
(1) At temperatures above 538°C, use only when the carbon content is 0.04% or higher.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
17.8
17.0
14.4
13.4
46.3
44.5
37.5
34.9
92.7
89.0
75.1
69.8
139.0
133.4
112.6
104.7
231.7
222.4
187.7
174.4
386.1
370.6
312.8
290.7
695.0
667.1
563.0
523.3
200
250
300
325
12.9
12.1
10.2
9.3
33.5
32.6
31.7
31.2
67.1
65.2
63.4
62.4
100.6
97.8
95.2
93.6
167.7
163.1
158.6
156.1
279.5
271.8
264.3
260.1
503.2
489.2
475.8
468.2
350
375
400
425
8.4
7.4
6.5
5.5
30.6
29.8
29.1
28.3
61.2
59.7
58.2
56.7
91.7
89.5
87.3
85.0
152.9
149.2
145.5
141.7
254.8
248.6
242.4
236.2
458.7
447.5
436.4
425.2
450
475
500
538
4.6
3.7
2.8
1.4
27.6
26.7
25.8
23.3
55.2
53.5
51.7
46.6
82.8
80.2
77.5
70.0
138.0
133.7
129.2
116.6
230.0
222.8
215.3
194.4
414.0
401.0
387.6
349.9
550
575
600
625
1.4(a)
1.4(a)
1.4(a)
1.4(a)
22.9
21.7
19.4
16.8
45.9
43.3
38.8
33.7
68.8
65.0
58.2
50.5
114.7
108.3
97.1
84.1
191.2
180.4
161.8
140.2
344.1
324.8
291.2
252.4
650
675
700
725
1.4(a)
1.4(a)
1.4(a)
1.4(a)
14.1
11.5
8.8
6.3
28.1
23.0
17.5
12.7
42.2
34.6
26.3
19.0
70.4
57.6
43.8
31.7
117.3
96.0
73.0
52.9
211.1
172.8
131.5
95.2
750
775
800
816
1.4(a)
1.2(a)
0.9(a)
0.7(a)
4.5
3.1
2.3
1.9
8.9
6.3
4.6
3.8
13.4
9.4
6.9
5.7
22.3
15.7
11.4
9.5
37.2
26.2
19.1
15.8
66.9
47.2
34.3
28.4
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
66
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-2.12
ASME B16.34-2004
Ratings for Group 2.12 Materials (Cont’d)
A 351 Gr. CK20 (1)
NOTE:
(1) At temperatures above 538°C, use only when the carbon content is 0.04% or higher.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
−29 to 38
50
100
150
18.4
17.9
16.1
14.9
48.0
46.8
41.9
38.9
96.0
93.5
83.8
77.9
144.1
140.3
125.7
116.8
240.1
233.8
209.5
194.7
400.1
389.6
349.1
324.5
720.3
701.4
628.4
584.0
200
250
300
325
14.4
14.0
13.6
13.4
37.4
36.4
35.4
34.8
74.9
72.8
70.8
69.7
112.3
109.2
106.2
104.5
187.2
182.0
177.0
174.2
312.0
303.3
295.0
290.3
561.6
546.0
531.0
522.6
350
375
400
425
13.1
12.8
12.4
12.1
34.1
33.3
32.5
31.6
68.3
66.6
64.9
63.3
102.4
99.9
97.4
94.9
170.6
166.5
162.3
158.2
284.4
277.5
270.6
263.6
511.9
499.5
487.0
474.5
450
475
500
538
11.8
11.4
11.1
10.5
30.8
29.8
28.8
27.3
61.6
59.7
57.7
54.7
92.4
89.5
86.5
82.0
154.0
149.2
144.2
136.7
256.7
248.6
240.3
227.8
462.1
447.6
432.6
410.0
550
575
600
625
10.6
10.4
9.3
8.1
27.7
27.1
24.3
21.0
55.3
54.1
48.5
42.1
83.0
81.2
72.8
63.1
138.3
135.3
121.3
105.2
230.5
225.6
202.2
175.3
414.9
406.0
364.0
315.5
650
675
700
725
6.7
5.5
4.7
3.6
17.6
14.4
12.3
9.4
35.2
28.8
24.7
18.8
52.8
43.2
37.0
28.2
87.9
72.0
61.6
47.0
146.6
120.0
102.7
78.4
263.8
215.9
184.9
141.0
750
775
800
816
2.4
1.5
1.3
0.9
6.1
4.0
3.3
2.4
12.3
7.9
6.5
4.7
18.4
11.9
9.8
7.1
30.7
19.9
16.3
11.8
51.2
33.1
27.2
19.7
92.2
59.6
49.0
35.5
67
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.1
B 462 Gr. N08020 (1)
B 463 Gr. N08020 (1)
Ratings for Group 3.1 Materials
B 464 Gr. N08020 (1)
B 468 Gr. N08020 (1)
B 473 Gr. N08020 (1)
NOTES: Only use annealed material.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
19.5
17.7
15.8
51.7
51.7
50.9
48.9
103.4
103.4
101.7
97.9
155.1
155.1
152.6
146.8
258.6
258.6
254.4
244.7
430.9
430.9
423.9
407.8
775.7
775.7
763.1
734.1
200
250
300
325
13.8
12.1
10.2
9.3
47.2
45.5
42.9
41.4
94.3
91.0
85.7
82.6
141.5
136.5
128.6
124.0
235.8
227.5
214.4
206.6
392.9
379.2
357.1
344.3
707.3
682.5
642.6
619.6
350
375
400
425
8.4
7.4
6.5
5.5
40.3
38.9
36.5
35.2
80.4
77.6
73.3
70.0
120.7
116.5
109.8
105.1
201.1
194.1
183.1
175.1
335.3
323.2
304.9
291.6
603.3
581.8
548.5
524.7
B – Special Class
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
200
250
300
325
20.0
19.5
18.9
18.7
51.7
50.8
49.4
48.8
103.4
101.6
98.7
97.5
155.1
152.4
148.1
146.3
258.6
253.9
246.8
243.8
430.9
423.2
411.3
406.3
775.7
761.8
740.3
731.3
350
375
400
425
18.5
18.4
18.2
17.9
48.3
48.0
47.6
46.6
96.6
95.9
95.2
93.2
144.9
143.9
142.8
139.8
241.5
239.8
238.0
233.0
402.5
399.7
396.7
388.4
724.5
719.5
714.1
699.1
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°C
68
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.2
B 160 Gr. N02200 (1)(2)
ASME B16.34-2004
Ratings for Group 3.2 Materials
B 161 Gr. N02200 (1)
B 162 Gr. N02200 (1)
B 163 Gr. N02200 (1)
NOTES:
(1) Only use annealed material.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
12.7
12.7
12.7
12.7
33.1
33.1
33.1
33.1
66.2
66.2
66.2
66.2
99.3
99.3
99.3
99.3
165.5
165.5
165.5
165.5
275.8
275.8
275.8
275.8
496.4
496.4
496.4
496.4
200
250
300
325
12.7
12.1
10.2
7.2
33.1
31.6
29.2
18.8
66.2
63.2
58.5
37.6
99.3
94.8
87.7
56.4
165.5
158.0
146.2
93.9
275.8
263.4
243.7
156.5
496.4
474.0
438.7
281.8
B – Special Class
Working Pressures by Class, bar
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
14.2
14.2
14.2
14.2
36.9
36.9
36.9
36.9
73.9
73.9
73.9
73.9
110.8
110.8
110.8
110.8
184.7
184.7
184.7
184.7
307.8
307.8
307.8
307.8
554.0
554.0
554.0
554.0
200
250
300
325
14.2
13.5
12.5
8.0
36.9
35.3
32.6
21.0
73.9
70.5
65.3
41.9
110.8
105.8
97.9
62.9
184.7
176.4
163.2
104.8
307.8
293.9
272.0
174.7
554.0
529.1
489.7
314.5
69
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.3
B 160 Gr. N02201 (1)(2)
Ratings for Group 3.3 Materials
B 162 Gr. N02201 (1)
NOTES:
(1) Only use annealed material.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Temperature,
°C
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
6.3
6.3
6.1
6.0
16.5
16.4
15.8
15.6
33.1
32.8
31.7
31.1
49.6
49.2
47.5
46.7
82.7
82.0
79.2
77.8
137.9
136.7
132.0
129.6
248.2
246.0
237.7
233.3
200
250
300
325
6.0
6.0
6.0
5.9
15.6
15.6
15.6
15.5
31.1
31.1
31.1
31.0
46.7
46.7
46.7
46.5
77.8
77.8
77.8
77.5
129.6
129.6
129.6
129.2
233.3
233.3
233.3
232.5
350
375
400
425
5.9
5.9
5.8
5.5
15.4
15.4
15.2
14.9
30.8
30.7
30.4
29.8
46.2
46.1
45.6
44.7
76.9
76.8
76.1
74.6
128.2
128.0
126.8
124.3
230.8
230.5
228.2
223.7
450
475
500
538
4.6
3.7
2.8
1.4
14.6
14.3
13.8
13.1
29.2
28.6
27.6
26.1
43.8
43.0
41.4
39.2
73.1
71.6
69.0
65.4
121.8
119.3
115.1
108.9
219.2
214.8
207.1
196.1
550
575
600
625
650
1.4(a)
1.4(a)
1.4(a)
1.3(a)
1.1(a)
9.8
5.4
4.4
3.4
2.8
19.6
10.7
8.9
6.9
5.7
29.5
16.1
13.3
10.3
8.5
49.1
26.8
22.2
17.2
14.2
81.8
44.6
37.0
28.7
23.6
147.3
80.3
66.7
51.7
42.6
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
7.1
7.0
6.8
6.7
18.5
18.3
17.7
17.4
36.9
36.6
35.4
34.7
55.4
54.9
53.1
52.1
92.3
91.5
88.4
86.8
153.9
152.5
147.4
144.7
277.0
274.6
265.3
260.4
200
250
300
325
6.7
6.7
6.7
6.6
17.4
17.4
17.4
17.3
34.7
34.7
34.7
34.6
52.1
52.1
52.1
51.9
86.8
86.8
86.8
86.5
144.7
144.7
144.7
144.1
260.4
260.4
260.4
259.5
350
375
400
425
6.6
6.6
6.5
6.4
17.2
17.1
17.0
16.6
34.4
34.3
34.0
33.3
51.5
51.4
50.9
49.9
85.9
85.7
84.9
83.2
143.1
142.9
141.5
138.7
257.6
257.2
254.6
249.7
450
475
500
538
6.3
6.1
5.9
5.6
16.3
16.0
15.4
14.6
32.6
32.0
30.8
29.2
48.9
47.9
46.2
43.8
81.6
79.9
77.0
72.9
135.9
133.2
128.4
121.6
244.7
239.7
231.1
218.8
550
575
600
625
650
4.3
2.6
2.1
1.7
1.4
11.3
6.7
5.6
4.3
3.5
22.6
13.4
11.1
8.6
7.1
33.9
20.1
16.7
12.9
10.6
56.5
33.4
27.8
21.5
17.7
94.1
55.7
46.3
35.9
29.5
169.4
100.3
83.3
64.6
53.2
70
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Table 2-3.4
B 127 Gr. N04400 (1)
B 163 Gr. N04400 (1)
ASME B16.34-2004
Ratings for Group 3.4 Materials
B 164 Gr. N04400 (1)
B 164 Gr. N04405 (1)(2)
B 165 Gr. N04400 (1)
B 564 Gr. N04400 (1)
NOTES:
(1) Only use annealed material.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
15.9
15.4
13.8
12.9
41.4
40.2
35.9
33.7
82.7
80.5
71.9
67.5
124.1
120.7
107.8
101.2
206.8
201.2
179.7
168.7
344.7
335.3
299.5
281.1
620.5
603.6
539.1
506.0
200
250
300
325
12.5
12.1
10.2
9.3
32.7
32.6
32.6
32.6
65.4
65.2
65.2
65.2
98.1
97.8
97.8
97.8
163.5
163.0
163.0
163.0
272.4
271.7
271.7
271.7
490.4
489.0
489.0
489.0
350
375
400
425
8.4
7.4
6.5
5.5
32.6
32.4
32.1
31.6
65.1
64.8
64.2
63.3
97.7
97.2
96.2
94.9
162.8
161.9
160.4
158.2
271.3
269.9
267.4
263.6
488.4
485.8
481.2
474.5
450
475
4.6
3.7
26.9
20.8
53.8
41.5
80.7
62.3
134.5
103.8
224.2
173.0
403.5
311.3
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
17.7
17.2
15.4
14.4
46.2
44.9
40.1
37.6
92.3
89.8
80.2
75.3
138.5
134.7
120.3
112.9
230.9
224.6
200.6
188.2
384.8
374.3
334.3
313.7
692.6
673.7
601.7
564.7
200
250
300
325
14.0
13.9
13.9
13.9
36.5
36.4
36.4
36.4
73.0
72.8
72.8
72.8
109.5
109.1
109.1
109.1
182.4
181.9
181.9
181.9
304.0
303.2
303.2
303.2
547.3
545.7
545.7
545.7
350
375
400
425
13.9
13.9
13.7
13.5
36.3
36.1
35.8
35.3
72.7
72.3
71.6
70.6
109.0
108.4
107.4
105.9
181.7
180.7
179.0
176.5
302.8
301.2
298.4
294.2
545.1
542.2
537.1
529.6
450
475
12.6
9.9
32.9
25.9
65.9
51.9
98.8
77.8
164.7
129.7
274.6
216.2
494.2
389.2
71
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.5
B 163 Gr. N06600 (1)
Ratings for Group 3.5 Materials
B 166 Gr. N06600 (1)
B 168 Gr. N06600 (1)
B 564 Gr. N06600 (1)
NOTE:
(1) Only use annealed material.
A – Standard Class
Temperature,
°C
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
19.5
17.7
15.8
51.7
51.7
51.5
50.3
103.4
103.4
103.0
100.3
155.1
155.1
154.6
150.6
258.6
258.6
257.6
250.8
430.9
430.9
429.4
418.2
775.7
775.7
773.0
752.8
200
250
300
325
13.8
12.1
10.2
9.3
48.6
46.3
42.9
41.4
97.2
92.7
85.7
82.6
145.8
139.0
128.6
124.0
243.4
231.8
214.4
206.6
405.4
386.2
357.1
344.3
729.8
694.8
642.6
619.6
350
375
400
425
8.4
7.4
6.5
5.5
40.3
38.9
36.5
35.2
80.4
77.6
73.3
70.0
120.7
116.5
109.8
105.1
201.1
194.1
183.1
175.1
335.3
323.2
304.9
291.6
603.3
581.8
548.5
524.7
450
475
500
538
4.6
3.7
2.8
1.4
33.7
31.7
28.2
16.5
67.7
63.4
56.5
33.1
101.4
95.1
84.7
49.6
169.0
158.2
140.9
82.7
281.8
263.9
235.0
137.9
507.0
474.8
423.0
248.2
550
575
600
625
650
1.4(a)
1.4(a)
1.4(a)
1.4(a)
1.4(a)
13.9
9.4
6.6
5.1
4.7
27.9
18.9
13.3
10.3
9.5
41.8
28.3
19.9
15.4
14.2
69.7
47.2
33.2
25.7
23.6
116.2
78.6
55.3
42.8
39.4
209.2
141.5
99.6
77.0
70.9
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
B – Special Class
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
200
250
300
325
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
350
375
400
425
19.8
19.3
19.3
19.0
51.5
50.6
50.3
49.6
102.8
101.0
100.6
99.3
154.3
151.5
150.6
148.9
257.1
252.5
251.2
248.2
428.6
420.9
418.3
413.7
771.4
757.4
753.2
744.6
450
475
500
538
18.1
16.4
13.7
7.9
47.3
42.8
35.6
20.7
94.4
85.5
71.5
41.4
141.4
128.2
107.1
62.1
235.8
213.7
178.6
103.4
393.1
356.3
297.5
172.4
707.6
641.3
535.4
310.3
550
575
600
625
650
6.7
4.5
3.2
2.5
2.3
17.4
11.8
8.3
6.4
5.9
34.9
23.6
16.6
12.8
11.8
52.3
35.4
24.9
19.3
17.7
87.2
59.0
41.5
32.1
29.5
145.3
98.3
69.1
53.5
49.2
261.5
176.9
124.5
96.3
88.6
72
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, bar
Temperature,
°C
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.6
B 163 Gr. N08800 (1)
ASME B16.34-2004
Ratings for Group 3.6 Materials
B 408 Gr. N08800 (1)
B 409 N08800 (1)
B 564 Gr. N08800 (1)
NOTE:
(1) Only use annealed material.
A – Standard Class
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.0
18.7
17.5
15.8
49.6
48.8
45.6
44.0
99.3
97.6
91.2
88.0
148.9
146.4
136.9
132.0
248.2
244.0
228.1
219.9
413.7
406.7
380.1
366.6
744.6
732.1
684.3
659.8
200
250
300
325
13.8
12.1
10.2
9.3
42.8
41.7
40.8
40.3
85.6
83.5
81.6
80.6
128.4
125.2
122.5
120.9
214.0
208.7
204.1
201.6
356.7
347.9
340.2
336.0
642.0
626.1
612.3
604.7
350
375
400
425
8.4
7.4
6.5
5.5
39.8
38.9
36.5
35.2
79.5
77.6
73.3
70.0
119.3
116.5
109.8
105.1
198.8
194.1
183.1
175.1
331.3
323.2
304.9
291.6
596.4
581.8
548.5
524.7
450
475
500
538
4.6
3.7
2.8
1.4
33.7
31.7
28.2
25.2
67.7
63.4
56.5
50.0
101.4
95.1
84.7
75.2
169.0
158.2
140.9
125.5
281.8
263.9
235.0
208.9
507.0
474.8
423.0
375.8
550
575
600
625
1.4(a)
1.4(a)
1.4(a)
1.4(a)
25.0
24.0
21.6
18.3
49.8
47.9
42.9
36.6
74.8
71.8
64.2
54.9
124.9
119.7
107.0
91.2
208.0
199.5
178.5
152.0
374.2
359.1
321.4
273.8
650
675
700
725
1.4(a)
1.4(a)
1.4(a)
1.4(a)
14.1
10.3
5.6
4.0
28.1
20.5
11.1
8.1
42.5
30.8
16.7
12.1
70.7
51.3
27.8
20.1
117.7
85.6
46.3
33.6
211.7
154.0
83.4
60.4
750
775
800
816
1.2(a)
0.9(a)
0.8(a)
0.7(a)
3.0
2.5
2.2
1.9
6.1
4.9
4.3
3.8
9.1
7.4
6.5
5.7
15.1
12.4
10.8
9.5
25.2
20.6
18.0
15.8
45.4
37.1
32.3
28.4
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
73
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, bar
Temperature
°C
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.6
B 163 Gr. N08800 (1)
Ratings for Group 3.6 Materials (Cont’d)
B 408 Gr. N08800 (1)
B 409 N08800 (1)
B 564 Gr. N08800 (1)
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
NOTE:
(1) Only use annealed material.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
19.5
18.8
51.7
51.7
50.9
49.1
103.4
103.4
101.8
98.2
155.1
155.1
152.7
147.3
258.6
258.6
254.6
245.5
430.9
430.9
424.3
409.1
775.7
775.7
763.7
736.4
200
250
300
325
18.3
17.9
17.5
17.2
47.8
46.6
45.6
45.0
95.5
93.2
91.1
90.0
143.3
139.8
136.7
135.0
238.8
232.9
227.8
225.0
398.0
388.2
379.6
375.0
716.5
698.8
683.4
674.9
350
375
400
425
17.0
16.8
16.6
16.4
44.4
43.9
43.4
42.9
88.8
87.8
86.8
85.8
133.1
131.6
130.1
128.6
221.9
219.4
216.9
214.4
369.8
365.6
361.5
357.3
665.6
658.1
650.7
643.2
450
475
500
538
16.2
16.1
13.7
11.0
42.4
42.0
35.6
29.0
84.8
84.0
71.5
57.9
127.1
126.1
107.1
86.9
211.9
210.1
178.6
145.1
353.2
350.2
297.5
241.7
635.7
630.3
535.4
435.1
550
575
600
625
11.0
10.9
10.3
8.7
29.0
28.6
26.9
23.0
57.9
57.1
53.5
45.7
86.9
85.7
80.4
68.6
145.1
143.0
134.0
114.3
241.7
238.3
223.4
190.6
435.1
428.8
401.9
342.8
650
675
700
725
6.9
4.9
2.7
1.9
17.9
12.8
6.9
5.0
35.5
25.7
13.9
10.1
53.1
38.5
20.8
15.1
88.6
64.2
34.7
25.2
147.9
107.0
57.9
42.0
266.1
192.5
104.2
75.5
750
775
800
816
1.4
1.2
1.0
0.9
3.8
3.1
2.7
2.4
7.6
6.2
5.4
4.7
11.3
9.3
8.1
7.1
18.9
15.5
13.5
11.8
31.5
25.8
22.5
19.7
56.7
46.4
40.4
35.5
74
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.7
B 333 Gr. N10665 (1)
B 333 Gr. N10675 (1)
B 335 Gr. N10665 (1)(2)
ASME B16.34-2004
Ratings for Group 3.7 Materials
B 335 Gr. N10675 (1)(2)
B 462 Gr. N10665 (1)
B 462 Gr. N10675 (1)
B 564 Gr. N10665 (1)
B 564 Gr. N10675 (1)
B 622 Gr. N10665 (1)
B 622 Gr. N10675 (1)
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
NOTES:
(1) Only use solution annealed material.
(2) The chemical composition, mechanical properties, heat treating requirements, and grain size requirements shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and markings
shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
19.5
17.7
15.8
51.7
51.7
51.5
50.3
103.4
103.4
103.0
100.3
155.1
155.1
154.6
150.6
258.6
258.6
257.6
250.8
430.9
430.9
429.4
418.2
775.7
775.7
773.0
752.8
200
250
300
325
13.8
12.1
10.2
9.3
48.6
46.3
42.9
41.4
97.2
92.7
85.7
82.6
145.8
139.0
128.6
124.0
243.4
231.8
214.4
206.6
405.4
386.2
357.1
344.3
729.8
694.8
642.6
619.6
350
375
400
425
8.4
7.4
6.5
5.5
40.3
38.9
36.5
35.2
80.4
77.6
73.3
70.0
120.7
116.5
109.8
105.1
201.1
194.1
183.1
175.1
335.3
323.2
304.9
291.6
603.3
581.8
548.5
524.7
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
200
250
300
325
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
350
375
400
425
19.8
19.3
19.3
19.0
51.5
50.6
50.3
49.6
102.8
101.0
100.6
99.3
154.3
151.5
150.6
148.9
257.1
252.5
251.2
248.2
428.6
420.9
418.3
413.7
771.4
757.4
753.2
744.6
75
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.8
B
B
B
B
B
333
335
423
424
425
Gr.
Gr.
Gr.
Gr.
Gr.
N10001
N10001
N08825
N08825
N08825
(1)(2)
(1)(2)(6)
(3)(7)
(3)(7)
(3)(6)(7)
B 434 Gr. N10003 (3)
B 443 Gr. N06625 (3)(4)
B
B
B
B
B
B
B
B
446
462
462
462
564
564
564
564
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
N06625
N06022
N06200
N10276
N06022
N06200
N06625
N08825
Ratings for Group 3.8 Materials
(3)(4)
(1)(5)
(1)(2)
(1)(5)
(1)(5)
(1)(2)
(3)(4)
(3)(7)
B
B
B
B
B
B
B
B
564
573
574
574
574
574
575
575
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
N10276
N10003
N06022
N06200
N06455
N10276
N06022
N06200
(1)(5)
(3)(6)
(1)(5)(6)
(1)(2)(6)
(1)(2)(6)
(1)(5)(6)
(1)(5)
(1)(2)
B
B
B
B
B
B
B
575
575
622
622
622
622
622
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
N06455
N10276
N06022
N06200
N06455
N10001
N10276
(1)(2)
(1)(5)
(1)(5)
(1)(2)
(1)(2)
(2)(3)
(1)(5)
NOTES:
(1) Only use solution annealed material.
(2) Not to be used over 425°C.
(3) Only use annealed material.
(4) Not to be used over 645°C. Alloy N06625 in the annealed condition is subject to severe loss of impact strength at
room temperatures after exposure in the range of 538°C to 760°C.
(5) Not to be used over 675°C.
(6) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
(7) Not to be used over 538°C.
A – Standard Class
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
19.5
17.7
15.8
51.7
51.7
51.5
50.3
103.4
103.4
103.0
100.3
155.1
155.1
154.6
150.6
258.6
258.6
257.6
250.8
430.9
430.9
429.4
418.2
775.7
775.7
773.0
752.8
200
250
300
325
13.8
12.1
10.2
9.3
48.3
46.3
42.9
41.4
96.7
92.7
85.7
82.6
145.0
139.0
128.6
124.0
241.7
231.8
214.4
206.6
402.8
386.2
357.1
344.3
725.1
694.8
642.6
619.6
350
375
400
425
8.4
7.4
6.5
5.5
40.3
38.9
36.5
35.2
80.4
77.6
73.3
70.0
120.7
116.5
109.8
105.1
201.1
194.1
183.1
175.1
335.3
323.2
304.9
291.6
603.3
581.8
548.5
524.7
450
475
500
538
4.6
3.7
2.8
1.4
33.7
31.7
28.2
25.2
67.7
63.4
56.5
50.0
101.4
95.1
84.7
75.2
169.0
158.2
140.9
125.5
281.8
263.9
235.0
208.9
507.0
474.8
423.0
375.8
550
575
600
625
1.4(a)
1.4(a)
1.4(a)
1.4(a)
25.0
24.0
21.6
18.3
49.8
47.9
42.9
36.6
74.8
71.8
64.2
54.9
124.9
119.7
107.0
91.2
208.0
199.5
178.5
152.0
374.2
359.1
321.4
273.8
650
675
700
1.4(a)
1.4(a)
1.4(a)
14.1
11.5
8.8
28.1
23.0
17.5
42.2
34.6
26.3
70.4
57.6
43.8
117.3
96.0
73.0
211.1
172.8
131.5
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
76
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, bar
Temperature,
°C
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.8
B
B
B
B
B
333
335
423
424
425
Gr.
Gr.
Gr.
Gr.
Gr.
N10001
N10001
N08825
N08825
N08825
(1)(2)
(1)(2)(6)
(3)(7)
(3)(7)
(3)(6)(7)
B
B
B
B
B
B
B
B
B 434 Gr. N10003 (3)
B 443 Gr. N06625 (3)(4)
446
462
462
462
564
564
564
564
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
ASME B16.34-2004
Ratings for Group 3.8 Materials (Cont’d)
N06625
N06022
N06200
N10276
N06022
N06200
N06625
N08825
(3)(4)
(1)(5)
(1)(2)
(1)(5)
(1)(5)
(1)(2)
(3)(4)
(3)(7)
B
B
B
B
B
B
B
B
564
573
574
574
574
574
575
575
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
N10276
N10003
N06022
N06200
N06455
N10276
N06022
N06200
(1)(5)
(3)(6)
(1)(5)(6)
(1)(2)(6)
(1)(2)(6)
(1)(5)(6)
(1)(5)
(1)(2)
B
B
B
B
B
B
B
575
575
622
622
622
622
622
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
N06455
N10276
N06022
N06200
N06455
N10001
N10276
(1)(2)
(1)(5)
(1)(5)
(1)(2)
(1)(2)
(2)(3)
(1)(5)
NOTES:
(1) Only use solution annealed material.
(2) Not to be used over 425°C.
(3) Only use annealed material.
(4) Not to be used over 645°C. Alloy N06625 in the annealed condition is subject to severe loss of impact strength at
room temperatures after exposure in the range of 538°C to 760°C.
(5) Not to be used over 675°C.
(6) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
(7) Not to be used over 538°C.
B – Special Class
Working Pressures by Class, bar
Temperature
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
200
250
300
325
20.0
19.8
19.1
18.8
51.7
51.7
49.9
49.1
103.4
103.4
99.8
98.1
155.1
155.1
149.6
147.2
258.6
258.6
249.4
245.3
430.9
430.9
415.7
408.8
775.7
775.7
748.2
735.9
350
375
400
425
18.6
18.4
18.2
18.1
48.4
47.9
47.5
47.3
96.9
95.9
94.9
94.6
145.3
143.8
142.4
141.9
242.2
239.7
237.3
236.4
403.7
399.5
395.5
394.1
726.6
719.1
711.8
709.3
450
475
500
538
17.9
16.4
13.7
11.0
46.8
42.8
35.6
29.0
93.6
85.5
71.5
57.9
140.4
128.2
107.1
86.9
234.1
213.7
178.6
145.1
390.1
356.3
297.5
241.7
702.2
641.3
535.4
435.1
550
575
600
625
11.0
10.9
10.3
8.7
29.0
28.6
26.9
23.0
57.9
57.1
53.5
45.7
86.9
85.7
80.4
68.6
145.1
143.0
134.0
114.3
241.7
238.3
223.4
190.6
435.1
428.8
401.9
342.8
650
675
700
6.7
5.5
4.2
17.6
14.4
11.0
35.2
28.8
21.9
52.8
43.2
32.9
87.9
72.0
54.8
146.6
120.0
91.3
263.8
215.9
164.4
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
77
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.9
B 435 Gr. N06002 (1)
Ratings for Group 3.9 Materials
B 572 Gr. N06002 (1)(2)
B 622 Gr. N06002 (1)
NOTES:
(1) Only use solution annealed material.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
19.5
17.7
15.8
51.7
51.7
51.5
47.6
103.4
103.4
103.0
95.2
155.1
155.1
154.6
142.8
258.6
258.6
257.6
237.9
430.9
430.9
429.4
396.5
775.7
775.7
773.0
713.8
200
250
300
325
13.8
12.1
10.2
9.3
44.3
41.6
39.5
38.6
88.6
83.1
79.0
77.2
132.9
124.7
118.5
115.8
221.5
207.9
197.4
193.0
369.2
346.4
329.1
321.7
664.6
623.6
592.3
579.1
350
375
400
425
8.4
7.4
6.5
5.5
37.9
37.3
36.5
35.2
75.8
74.7
73.3
70.0
113.7
112.0
109.8
105.1
189.5
186.6
183.1
175.1
315.8
311.1
304.9
291.6
568.5
559.9
548.5
524.7
450
475
500
538
4.6
3.7
2.8
1.4
33.7
31.7
28.2
25.2
67.7
63.4
56.5
50.0
101.4
95.1
84.7
75.2
169.0
158.2
140.9
125.5
281.8
263.9
235.0
208.9
507.0
474.8
423.0
375.8
550
575
600
625
1.4(a)
1.4(a)
1.4(a)
1.4(a)
25.0
24.0
21.6
18.3
49.8
47.9
42.9
36.6
74.8
71.8
64.2
54.9
124.9
119.7
107.0
91.2
208.0
199.5
178.5
152.0
374.2
359.1
321.4
273.8
650
675
700
725
1.4(a)
1.4(a)
1.4(a)
1.4(a)
14.1
12.4
10.1
7.9
28.1
25.2
20.0
15.4
42.5
37.6
29.8
23.2
70.7
62.7
49.7
38.6
117.7
104.5
83.0
64.4
211.7
187.9
149.4
115.8
750
775
800
816
1.4(a)
1.4(a)
1.2(a)
1.0(a)
5.9
4.6
3.5
2.8
11.7
9.0
7.0
5.9
17.6
13.7
10.5
8.6
29.6
22.8
17.4
14.1
49.1
38.0
29.2
23.8
88.2
68.4
52.6
42.7
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
78
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.9
B 435 Gr. N06002 (1)
ASME B16.34-2004
Ratings for Group 3.9 Materials (Cont’d)
B 572 Gr. N06002 (1)(2)
B 622 Gr. N06002 (1)
NOTES:
(1) Only use solution annealed material.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
200
250
300
325
19.0
17.8
16.9
16.5
49.5
46.4
44.1
43.1
98.9
92.8
88.1
86.2
148.4
139.2
132.2
129.3
247.3
232.0
220.4
215.4
412.1
386.7
367.3
359.1
741.8
696.0
661.1
646.3
350
375
400
425
16.2
16.0
15.8
15.7
42.3
41.7
41.2
40.8
84.6
83.3
82.3
81.7
126.9
125.0
123.5
122.5
211.5
208.3
205.8
204.2
352.5
347.2
343.1
340.3
634.5
624.9
617.5
612.5
450
475
500
538
15.5
15.4
13.7
11.0
40.5
40.2
35.6
29.0
81.0
80.3
71.5
57.9
121.5
120.5
107.1
86.9
202.5
200.9
178.6
145.1
337.5
334.8
297.5
241.7
607.6
602.6
535.4
435.1
550
575
600
625
650
675
700
725
11.0
10.9
10.3
8.7
6.9
6.2
4.8
3.7
29.0
28.6
26.9
23.0
17.9
16.0
12.4
9.7
57.9
57.1
53.5
45.7
35.5
31.6
25.0
19.5
86.9
85.7
80.4
68.6
53.1
47.3
37.3
28.9
145.1
143.0
134.0
114.3
88.6
78.9
62.3
48.3
241.7
238.3
223.4
190.6
147.9
131.7
103.7
80.2
435.1
428.8
401.9
342.8
266.1
237.0
186.5
144.5
750
775
800
816
2.8
2.2
1.8
1.4
7.4
5.8
4.4
3.4
14.8
11.4
8.8
7.2
22.1
17.2
13.2
10.7
36.7
28.5
22.0
17.9
61.2
47.6
36.6
29.6
110.3
85.6
65.6
53.1
79
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.10
B 599 Gr. N08700 (1)
Ratings for Group 3.10 Materials
B 672 Gr. N08700 (1)(2)
NOTES:
(1) Only use solution annealed material.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
19.5
17.7
15.8
51.7
51.7
51.5
47.1
103.4
103.4
103.0
94.2
155.1
155.1
154.6
141.3
258.6
258.6
257.6
235.5
430.9
430.9
429.4
392.5
775.7
775.7
772.9
706.5
200
250
300
325
350
13.8
12.1
10.2
9.3
8.4
44.3
42.8
41.3
40.4
38.9
88.5
85.6
82.7
80.7
77.8
132.8
128.4
124.0
121.1
116.7
221.3
214.0
206.7
201.8
194.5
368.9
356.6
344.5
336.4
324.2
664.0
641.9
620.0
605.5
583.6
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
20.0
20.0
51.7
51.7
51.7
51.7
103.4
103.4
103.4
103.4
155.1
155.1
155.1
155.1
258.6
258.6
258.6
258.6
430.9
430.9
430.9
430.9
775.7
775.7
775.7
775.7
200
250
300
325
350
18.9
18.3
17.7
17.3
18.6
49.4
47.8
46.1
45.1
48.6
98.8
95.5
92.3
90.1
97.3
148.2
143.3
138.4
135.2
145.9
247.0
238.8
230.7
225.3
243.2
411.7
398.0
384.4
375.4
405.3
741.1
716.4
692.0
675.8
729.6
80
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.11
B 625 Gr. N08904 (1)
ASME B16.34-2004
Ratings for Group 3.11 Materials
B 649 Gr. N08904 (1)(2)
B 677 Gr. N08904 (1)
NOTES:
(1) Only use annealed material.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.7
18.8
15.7
14.4
51.3
49.1
41.1
37.5
102.6
98.3
82.1
75.0
153.9
147.4
123.2
112.5
256.5
245.7
205.3
187.5
427.5
409.6
342.1
312.5
769.5
737.2
615.9
562.5
200
250
300
325
350
375
13.3
12.1
10.2
9.3
8.4
7.4
34.7
32.0
30.0
29.2
28.7
28.2
69.3
64.0
60.0
58.5
57.3
56.5
104.0
95.9
90.0
87.7
86.0
84.7
173.4
159.9
150.1
146.1
143.4
141.2
288.9
266.5
250.1
243.6
238.9
235.4
520.1
479.6
450.2
438.4
430.1
423.7
B – Special Class
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
19.6
17.6
16.0
51.7
51.1
45.8
41.9
103.4
102.2
91.6
83.7
155.1
153.3
137.5
125.6
258.6
255.5
229.1
209.3
430.9
425.9
381.9
348.8
775.7
766.6
687.3
627.8
200
250
300
325
350
375
14.8
13.7
12.8
12.5
12.3
13.5
38.7
35.7
33.5
32.6
32.0
35.3
77.4
71.4
67.0
65.2
64.0
70.6
116.1
107.1
100.5
97.9
96.0
105.9
193.5
178.4
167.5
163.1
160.0
176.5
322.5
297.4
279.1
271.9
266.7
294.2
580.4
535.3
502.4
489.3
480.0
529.6
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°C
81
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.12
A 351 Gr. CN3MN(1)
B 462 Gr. N08367(1)
B 581 Gr. N06985 (1)(2)
Ratings for Group 3.12 Materials
B 582 Gr. N06985 (1)
B 622 Gr. N06985 (1)
B 622 Gr. N08320 (1)
B 620 Gr. N08320 (1)
B 621 Gr. N08320 (1)(2)
B 688 Gr. N08367(1)
NOTES:
(1) Only use solution annealed material.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
150
300
600
900
1500
2500
4500
−29 to 38
50
100
17.8
17.5
16.3
46.3
45.6
42.5
92.7
91.1
85.1
139.0
136.7
127.6
231.7
227.8
212.7
386.1
379.7
354.5
695.0
683.5
638.1
150
200
250
300
325
15.4
13.8
12.1
10.2
9.3
40.1
37.3
34.9
33.1
32.3
80.3
74.6
69.8
66.2
64.6
120.4
112.0
104.7
99.3
97.0
200.7
186.6
174.5
165.5
161.6
334.6
311.0
290.8
275.9
269.3
602.2
559.8
523.4
496.6
484.8
350
375
400
425
8.4
7.4
6.5
5.5
31.6
31.0
30.4
29.8
63.2
62.0
60.8
59.7
94.8
93.0
91.3
89.5
158.1
155.1
152.1
149.1
263.4
258.5
253.5
248.5
474.2
465.2
456.3
447.4
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.5
18.2
17.2
51.7
50.9
47.5
44.8
103.4
101.7
95.0
89.6
155.1
152.6
142.4
134.4
258.6
254.3
237.4
224.0
430.9
423.8
395.6
373.4
775.7
762.9
712.2
672.1
200
250
300
325
16.0
14.9
14.2
13.8
41.6
38.9
37.0
36.1
83.3
77.9
73.9
72.1
124.9
116.8
110.9
108.2
208.2
194.7
184.8
180.3
347.1
324.5
307.9
300.6
624.7
584.2
554.3
541.0
350
375
400
425
13.5
13.3
13.0
12.8
35.3
34.6
34.0
33.3
70.6
69.2
67.9
66.6
105.8
103.8
101.9
99.9
176.4
173.1
169.8
166.4
294.0
288.5
282.9
277.4
529.2
519.2
509.3
499.3
82
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, bar
Temperature,
°C
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.13
B 564 Gr. N08031 (1)
B 625 Gr. N08031 (1)
ASME B16.34-2004
Ratings for Group 3.13 Materials
B 581 Gr. N06975 (2)(3)
B 622 Gr. N08031 (1)
B 582 Gr. N06975 (2)
B 649 Gr. N08031 (1)(3)
B 622 Gr. N06975 (2)
NOTES:
(1) Only use annealed material.
(2) Only use solution annealed material.
(3) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
19.5
17.7
15.8
51.7
51.7
48.2
45.8
103.4
103.4
96.3
91.6
155.1
155.1
144.5
137.4
258.6
258.6
240.8
228.9
430.9
430.9
401.4
381.6
775.7
775.7
722.5
686.8
200
250
300
325
13.8
12.1
10.2
9.3
43.6
41.5
39.4
38.4
87.1
82.9
78.7
76.9
130.7
124.4
118.1
115.3
217.8
207.3
196.8
192.2
362.9
345.5
328.1
320.3
653.3
621.8
590.5
576.6
350
375
400
425
8.4
7.4
6.5
5.5
37.7
37.2
36.5
35.2
75.5
74.3
73.3
70.0
113.2
111.5
109.8
105.1
188.7
185.8
183.1
175.1
314.5
309.7
304.9
291.6
566.0
557.4
548.5
524.7
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
20.0
19.6
51.7
51.7
51.7
51.1
103.4
103.4
103.4
102.2
155.1
155.1
155.1
153.3
258.6
258.6
258.6
255.5
430.9
430.9
430.9
425.8
775.7
775.7
775.7
766.5
200
250
300
325
18.6
17.7
16.8
16.4
48.6
46.3
43.9
42.9
97.2
92.5
87.9
85.8
145.8
138.8
131.8
128.7
243.0
231.3
219.7
214.5
405.1
385.6
366.2
357.5
729.1
694.0
659.1
643.5
350
375
400
425
16.1
15.9
15.7
15.6
42.1
41.5
41.0
40.7
84.2
83.0
82.0
81.3
126.3
124.4
123.0
122.0
210.6
207.4
204.9
203.3
351.0
345.6
341.5
338.8
631.7
622.1
614.8
609.8
83
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.14
B 462 Gr. N06030(1)(2)
B 581 Gr. N06007(1)(3)
Ratings for Group 3.14 Materials
B 581 Gr. N06030(1)(2)(3)
B 582 Gr. N06007(1)
B 582 Gr. N06030(1)(2)
B 622 Gr. N06007(1)
B 622 Gr. N06030(1)(2)
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
NOTES:
(1) Only use solution annealed material.
(2) Not to be used over 425°C.
(3) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.0
18.6
17.0
15.8
49.6
48.6
44.3
41.3
99.3
97.1
88.6
82.6
148.9
145.7
132.8
124.0
248.2
242.8
221.4
206.6
413.7
404.6
369.0
344.3
744.6
728.3
664.2
619.8
200
250
300
325
13.8
12.1
10.2
9.3
39.1
37.4
36.1
35.6
78.2
74.8
72.2
71.1
117.3
112.2
108.3
106.7
195.4
187.0
180.6
177.9
325.7
311.6
300.9
296.4
586.3
560.9
541.7
533.6
350
375
400
425
8.4
7.4
6.5
5.5
35.2
34.9
34.6
34.4
70.3
69.7
69.2
68.9
105.5
104.6
103.7
103.3
175.8
174.3
172.9
172.1
293.1
290.6
288.1
286.9
527.5
523.0
518.7
516.4
450
475
500
538
4.6
3.7
2.8
1.4
33.7
31.7
28.2
25.2
67.7
63.4
56.5
50.0
101.4
95.1
84.7
75.2
169.0
158.2
140.9
125.5
281.8
263.9
235.0
208.9
507.0
474.8
423.0
375.8
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
18.9
17.7
51.7
51.7
49.4
46.1
103.4
103.4
98.8
92.2
155.1
155.1
148.3
138.3
258.6
258.6
247.1
230.6
430.9
430.9
411.8
384.3
775.7
775.7
741.3
691.7
200
250
300
325
16.7
16.0
15.5
15.2
43.6
41.7
40.3
39.7
87.2
83.5
80.6
79.4
130.9
125.2
120.9
119.1
218.1
208.7
201.5
198.5
363.5
347.8
335.9
330.9
654.3
626.0
604.6
595.5
350
375
400
425
15.0
14.9
14.8
14.7
39.2
38.9
38.6
38.4
78.5
77.8
77.2
76.8
117.7
116.7
115.8
115.3
196.2
194.6
193.0
192.1
327.1
324.3
321.6
320.2
588.7
583.7
578.9
576.4
450
475
500
538
14.7
14.6
13.7
11.0
38.3
38.1
35.6
29.0
76.5
76.2
71.5
57.9
114.8
114.3
107.1
86.9
191.3
190.5
178.6
145.1
318.8
317.4
297.5
241.7
573.9
571.4
535.4
435.1
84
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
ASME B16.34-2004
Table 2-3.15
A 494 Gr. N-12MV (1)(2)
A 494 Gr. CW-12MW (1)(2)
Ratings for Group 3.15 Materials
B 407 Gr. N08810 (1)
B 408 Gr. N08810 (1)(3)
B 409 Gr. N08810 (1)
B 564 Gr. N08810 (1)
NOTES:
(1) Only use solution annealed material.
(2) Not to be used over 538°C.
(3) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
15.9
15.6
14.5
13.7
41.4
40.6
37.8
35.9
82.7
81.3
75.6
71.7
124.1
121.9
113.4
107.6
206.8
203.2
189.0
179.3
344.7
338.7
315.0
298.9
620.5
609.6
567.0
538.0
200
250
300
325
13.0
12.1
10.2
9.3
33.9
32.3
30.7
30.1
67.9
64.5
61.5
60.1
101.8
96.8
92.2
90.2
169.6
161.3
153.7
150.3
282.7
268.9
256.2
250.5
508.9
484.0
461.2
450.9
350
375
400
425
8.4
7.4
6.5
5.5
29.4
28.7
28.3
27.7
58.8
57.4
56.5
55.3
88.3
86.2
84.8
83.0
147.1
143.6
141.3
138.4
245.2
239.4
235.6
230.6
441.3
430.8
424.0
415.1
450
475
500
538
4.6
3.7
2.8
1.4
27.2
26.8
26.3
25.2
54.4
53.5
52.6
50.0
81.7
80.3
79.0
75.2
136.1
133.9
131.6
125.5
226.8
223.1
219.4
208.9
408.3
401.6
394.9
375.8
550
575
600
625
1.4(a)
1.4(a)
1.4(a)
1.4(a)
25.0
24.0
21.6
18.3
49.8
47.9
42.9
36.6
74.8
71.8
64.2
54.9
124.9
119.7
107.0
91.2
208.0
199.5
178.5
152.0
374.2
359.1
321.4
273.8
650
675
700
725
1.4(a)
1.4(a)
1.4(a)
1.4(a)
14.1
12.4
10.1
7.9
28.1
25.2
20.0
15.4
42.5
37.6
29.8
23.2
70.7
62.7
49.7
38.6
117.7
104.5
83.0
64.4
211.7
187.9
149.4
115.8
750
775
800
816
1.4(a)
1.4(a)
1.2(a)
1.0(a)
5.9
4.6
3.5
2.8
11.7
9.0
7.0
5.9
17.6
13.7
10.5
8.6
29.6
22.8
17.4
14.1
49.1
38.0
29.2
23.8
88.2
68.4
52.6
42.7
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
85
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.15
A 494 Gr. N-12MV (1)(2)
A 494 Gr. CW-12MV (1)(2)
Ratings for Group 3.15 Materials (Cont’d)
B 407 Gr. N08810 (1)
B 408 Gr. N08810 (1)(3)
B 409 Gr. N08810 (1)
B 564 Gr. N08810 (1)
NOTES:
(1) Only use solution annealed material.
(2) Not to be used over 538°C.
(3) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size trequirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
17.7
17.4
16.2
15.3
46.2
45.4
42.2
40.0
92.3
90.7
84.4
80.1
138.5
136.1
126.6
120.1
230.9
226.8
210.9
200.1
384.8
378.0
351.6
333.6
692.6
680.4
632.8
600.4
200
250
300
325
14.5
13.8
13.2
12.9
37.9
36.0
34.3
33.5
75.7
72.0
68.6
67.1
113.6
108.0
102.9
100.6
189.3
180.0
171.6
167.7
315.6
300.1
285.9
279.5
568.0
540.1
514.7
503.2
350
375
400
425
12.6
12.3
12.1
11.8
32.8
32.1
31.6
30.9
65.7
64.1
63.1
61.8
98.5
96.2
94.7
92.7
164.2
160.3
157.8
154.4
273.6
267.1
262.9
257.4
492.5
480.9
473.3
463.3
450
475
500
538
11.6
11.5
11.3
11.0
30.4
29.9
29.4
28.6
60.8
59.8
58.8
57.3
91.1
89.6
88.1
85.9
151.9
149.4
146.9
143.1
253.1
249.0
244.8
238.5
455.6
448.2
440.7
429.4
550
575
600
625
11.0
10.9
10.3
8.7
28.6
28.6
26.9
23.0
57.3
57.1
53.5
45.7
85.9
85.7
80.4
68.6
143.1
143.0
134.0
114.3
238.5
238.3
223.4
190.6
429.4
428.8
401.9
342.8
650
675
700
725
6.9
6.2
4.8
3.7
17.9
16.0
12.4
9.7
35.5
31.6
25.0
19.5
53.1
47.3
37.3
28.9
88.6
78.9
62.3
48.3
147.9
131.7
103.7
80.2
266.1
237.0
186.5
144.5
750
775
800
816
2.8
2.2
1.8
1.4
7.4
5.8
4.4
3.4
14.8
11.4
8.8
7.2
22.1
17.2
13.2
10.7
36.7
28.5
22.0
17.9
61.2
47.6
36.6
29.6
110.3
85.6
65.6
53.1
86
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.16
B 511 Gr. N08330 (1)(2)
ASME B16.34-2004
Ratings for Group 3.16 Materials
B 535 Gr. N08330 (1)
B 536 Gr. N08330 (1)
NOTES:
(1) Only use solution annealed material.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.0
18.5
16.7
15.6
49.6
48.4
43.5
40.8
99.3
96.7
87.0
81.6
148.9
145.1
130.5
122.5
248.2
241.8
217.5
204.1
413.7
403.1
362.4
340.2
744.6
725.5
652.4
612.3
200
250
300
325
13.8
12.1
10.2
9.3
38.6
36.8
35.2
34.5
77.2
73.5
70.4
69.0
115.8
110.3
105.6
103.6
192.9
183.8
176.1
172.6
321.6
306.3
293.4
287.7
578.8
551.4
528.2
517.9
350
375
400
425
8.4
7.4
6.5
5.5
33.9
33.2
32.6
32.0
67.8
66.3
65.1
64.0
101.7
99.5
97.7
95.9
169.4
165.8
162.9
159.9
282.4
276.4
271.4
266.5
508.3
497.5
488.6
479.6
450
475
500
538
4.6
3.7
2.8
1.4
31.4
30.8
28.2
25.2
62.8
61.6
56.5
50.0
94.1
92.4
84.7
75.2
156.9
153.9
140.9
125.5
261.5
256.5
235.0
208.9
470.7
461.8
423.0
375.8
550
575
600
625
1.4(a)
1.4(a)
1.4(a)
1.4(a)
25.0
21.9
17.4
13.8
49.8
43.7
34.8
27.5
74.8
65.6
52.3
41.3
124.9
109.4
87.1
68.8
208.0
182.3
145.1
114.6
374.2
328.1
261.3
206.3
650
675
700
725
1.4(a)
1.4(a)
1.4(a)
1.4(a)
11.0
9.1
7.6
6.1
22.1
18.2
15.2
12.2
33.1
27.3
22.8
18.3
55.1
45.6
38.0
30.5
91.9
75.9
63.3
50.9
165.4
136.7
113.9
91.6
750
775
800
816
1.4(a)
1.4(a)
1.2(a)
1.0(a)
4.8
3.9
3.1
2.6
9.5
7.7
6.3
5.2
14.3
11.6
9.4
7.8
23.8
19.4
15.6
13.0
39.7
32.3
26.1
21.7
71.5
58.1
46.9
39.0
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
87
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
A – Standard Class
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.16
B 511 Gr. N08330 (1)(2)
Ratings for Group 3.16 Materials (Cont’d)
B 535 Gr. N08330 (1)
B 536 Gr. N08330 (1)
NOTES:
(1) Only use solution annealed material.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
B – Special Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.8
19.6
18.6
17.5
51.7
51.1
48.5
45.6
103.4
102.2
97.1
91.1
155.1
153.3
145.6
136.7
258.6
255.5
242.7
227.8
430.9
425.8
404.5
379.7
775.7
766.5
728.1
683.4
200
250
300
325
16.5
15.7
15.1
14.8
43.1
41.0
39.3
38.5
86.1
82.1
78.6
77.1
129.2
123.1
117.9
115.6
215.3
205.1
196.5
192.7
358.9
341.9
327.5
321.1
646.0
615.4
589.5
578.0
350
375
400
425
14.5
14.2
13.9
13.7
37.8
37.0
36.4
35.7
75.6
74.0
72.7
71.4
113.5
111.1
109.1
107.1
189.1
185.1
181.8
178.4
315.2
308.5
302.9
297.4
567.3
555.3
545.3
535.3
450
475
500
538
13.4
13.2
13.0
11.0
35.0
34.4
33.8
29.0
70.0
68.7
67.6
57.9
105.1
103.1
101.4
86.9
175.1
171.8
169.1
145.1
291.9
286.3
281.8
241.7
525.3
515.4
507.2
435.1
550
575
600
625
11.0
10.5
8.3
6.6
29.0
27.3
21.8
17.2
57.9
54.7
43.5
34.4
86.9
82.0
65.3
51.6
145.1
136.7
108.9
86.0
241.7
227.8
181.4
143.3
435.1
410.1
326.6
257.9
650
675
700
725
5.3
4.4
3.6
2.9
13.8
11.4
9.5
7.6
27.6
22.8
19.0
15.3
41.3
34.2
28.5
22.9
68.9
56.9
47.5
38.1
114.8
94.9
79.1
63.6
206.7
170.8
142.4
114.4
750
775
800
816
2.3
1.9
1.5
1.2
6.0
4.8
3.9
3.3
11.9
9.7
7.8
6.5
17.9
14.5
11.7
9.8
29.8
24.2
19.6
16.3
49.6
40.3
32.6
27.1
89.4
72.6
58.7
48.8
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
88
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.17
ASME B16.34-2004
Ratings for Group 3.17 Materials
A 351 Gr. CN7M (1)
NOTE:
(1) Only use solution annealed material.
A – Standard Class
Working Pressures by Class, bar
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
15.9
15.4
13.5
12.3
41.4
40.1
35.3
32.0
82.7
80.3
70.6
64.1
124.1
120.4
105.9
96.1
206.8
200.7
176.5
160.2
344.7
334.4
294.2
267.0
620.5
602.0
529.6
480.6
200
250
300
325
11.3
10.4
9.7
9.3
29.4
27.2
25.4
24.4
58.7
54.4
50.8
48.8
88.1
81.7
76.1
73.3
146.8
136.1
126.9
122.1
244.7
226.9
211.5
203.5
440.4
408.4
380.7
366.4
B – Special Class
Working Pressures by Class, bar
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°C
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
17.6
17.0
14.7
13.5
45.8
44.2
38.3
35.2
91.6
88.5
76.6
70.4
137.4
132.7
114.9
105.5
229.0
221.2
191.5
175.9
381.7
368.7
319.1
293.2
687.0
663.6
574.4
527.7
200
250
300
325
12.5
11.6
10.9
11.7
32.7
30.4
28.3
30.5
65.4
60.8
56.6
61.1
98.2
91.2
85.0
91.6
163.6
151.9
141.6
152.6
272.7
253.2
236.0
254.4
490.8
455.8
424.8
457.9
89
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 2-3.18
Ratings for Group 3.18 Materials
B 167 Gr. N06600 (1)
NOTE:
(1) Only use annealed material.
A – Standard Class
Temperature,
°C
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
19.0
18.8
17.7
15.8
49.6
49.1
47.1
45.3
99.3
98.3
94.2
90.6
148.9
147.4
141.3
135.9
248.2
245.7
235.4
226.5
413.7
409.4
392.4
377.5
744.6
737.0
706.3
679.5
200
250
300
325
14.0
12.1
10.2
9.1
43.5
42.0
40.6
40.0
87.0
84.0
81.3
80.0
130.5
126.0
121.9
120.0
217.6
210.0
203.1
199.9
362.6
350.0
338.6
333.2
652.7
630.0
609.4
599.8
350
375
400
425
8.4
7.4
6.5
5.6
39.4
38.8
36.6
35.1
78.8
77.6
73.2
70.2
118.2
116.4
109.8
105.3
196.9
194.0
182.9
175.5
328.2
323.4
304.9
292.5
590.8
582.1
548.8
526.4
450
475
500
538
4.7
3.7
2.8
1.4
33.8
31.7
28.2
16.5
67.6
63.3
56.4
33.1
101.4
95.0
84.6
49.6
169.0
158.3
141.0
82.7
281.7
263.8
235.1
137.9
507.1
474.8
423.1
248.2
550
575
600
625
650
1.3(a)
1.3(a)
1.3(a)
1.3(a)
1.3(a)
13.9
9.4
6.6
5.1
4.7
27.9
18.9
13.3
10.3
9.5
41.8
28.3
19.9
15.4
14.2
69.7
47.2
33.2
25.7
23.6
116.2
78.6
55.3
42.8
39.4
209.2
141.5
99.6
77.0
70.9
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 538°C.
B – Special Class
Temperature,
°C
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
20.0
20.0
20.0
19.4
51.7
51.7
51.7
50.6
103.5
103.5
103.5
101.1
155.2
155.2
155.2
151.7
258.6
258.6
258.6
252.8
431.1
431.1
431.1
421.3
775.9
775.9
775.9
758.4
200
250
300
325
18.6
18.0
17.4
17.1
48.6
46.9
45.3
44.6
97.1
93.7
90.7
89.3
145.7
140.6
136.0
133.9
242.8
234.4
226.7
223.1
404.7
390.6
377.9
371.9
728.5
703.1
680.1
669.4
350
375
400
425
16.9
16.6
16.4
16.2
44.0
43.3
42.8
42.3
87.9
86.6
85.6
84.7
131.9
130.0
128.5
127.0
201.2
194.0
182.9
175.5
366.3
361.0
356.9
352.7
659.4
649.8
642.4
634.9
450
475
500
538
16.0
15.8
13.4
7.9
41.8
41.3
34.9
20.7
83.7
82.7
69.7
41.4
125.5
124.0
104.6
62.1
169.0
158.3
141.0
103.4
348.6
344.4
290.6
172.4
627.4
619.9
523.1
310.3
550
575
600
625
650
6.7
4.5
3.2
2.5
2.3
17.4
11.8
8.3
6.4
5.9
34.9
23.6
16.6
12.8
11.8
52.3
35.4
24.9
19.3
17.7
87.2
59.0
41.5
32.1
29.5
145.3
98.3
69.1
53.5
49.2
261.5
176.9
124.5
96.3
88.6
90
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 3-A
Valve Body Minimum Wall Thickness, tm, mm
Minimum Wall Thickness — tm, mm
Class
150
Class
300
Class
600
Class
900
Class
1500
Class
2500
3
6
9
12
2.5
2.7
2.8
2.9
2.5
2.7
2.9
3.0
2.8
3.0
3.2
3.4
2.8
3.1
3.4
3.7
3.1
3.5
3.8
4.2
3.6
4.2
4.9
5.6
4.9
6.5
8.0
9.6
15
18
21
24
27
31
3.1
3.3
3.5
3.7
3.9
4.3
3.3
3.5
3.7
4.0
4.3
4.7
3.6
3.9
4.2
4.4
4.8
5.1
4.2
4.7
5.2
5.7
6.3
6.6
4.8
5.3
5.9
6.4
7.2
8.1
6.6
7.7
8.7
9.7
11.1
12.8
12.0
14.3
16.7
19.0
22.2
26.1
35
40
45
50
55
4.6
4.9
5.2
5.5
5.6
5.1
5.5
5.9
6.3
6.5
5.4
5.7
6.0
6.3
6.3
6.9
7.2
7.5
7.8
8.3
9.0
9.9
10.8
11.8
12.7
14.5
16.2
17.9
19.6
21.3
30.0
33.9
37.9
41.8
45.7
60
65
70
75
80
5.7
5.8
5.9
6.0
6.1
6.6
6.8
6.9
7.1
7.2
6.6
6.9
7.3
7.6
8.0
8.8
9.3
9.9
10.4
10.9
13.6
14.5
15.5
16.4
17.3
23.0
24.7
26.4
28.1
29.8
49.6
53.6
57.5
61.4
65.3
85
90
95
100
110
6.2
6.3
6.4
6.5
6.5
7.4
7.5
7.7
7.8
8.0
8.3
8.6
9.0
9.3
10.0
11.4
11.9
12.5
13.0
14.0
18.2
19.1
20.1
21.0
22.8
31.5
33.2
34.9
36.6
40.0
69.3
73.2
77.1
81.0
88.9
120
130
140
150
160
6.7
6.8
7.0
7.1
7.3
8.3
8.7
9.0
9.3
9.7
10.7
11.4
12.0
12.7
13.4
15.1
16.1
17.2
18.2
19.3
24.7
26.5
28.4
30.2
32.0
43.4
46.9
50.3
53.7
57.1
96.7
104.6
112.4
120.3
128.1
170
180
190
200
210
7.5
7.6
7.8
8.0
8.1
10.0
10.3
10.7
11.0
11.3
14.1
14.7
15.4
16.1
16.8
20.3
21.3
22.4
23.4
24.5
33.9
35.7
37.6
39.4
41.3
60.5
63.9
67.3
70.7
74.1
136.0
143.8
151.7
159.5
167.4
220
230
240
250
260
8.3
8.4
8.6
8.8
8.9
11.7
12.0
12.3
12.7
13.0
17.4
18.1
18.8
19.5
20.2
25.5
26.6
27.6
28.7
29.7
43.1
45.0
46.8
48.6
50.5
77.5
80.9
84.4
87.8
91.2
175.2
183.1
190.9
198.8
206.6
270
280
290
300
310
9.1
9.3
9.4
9.6
9.8
13.3
13.7
14.0
14.3
14.7
20.8
21.5
22.2
22.9
23.5
30.8
31.8
32.8
33.9
34.9
52.3
54.2
56.0
57.9
59.7
94.6
98.0
101.4
104.8
108.2
214.5
222.3
230.2
238.0
245.9
91
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
Class
4500
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Inside
Dia.
d, mm
[Note (1)]
ASME B16.34-2004
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 3-A
Valve Body Minimum Wall Thickness, tm, mm (Cont’d)
Class
150
Class
300
Class
600
Class
900
Class
1500
Class
2500
Class
4500
320
330
340
350
360
9.9
10.1
10.2
10.4
10.6
15.0
15.3
15.7
16.0
16.3
24.2
24.9
25.6
26.3
26.9
36.0
37.0
38.1
39.1
40.2
61.6
63.4
65.2
67.1
68.9
111.6
115.0
118.4
121.9
125.3
253.7
261.6
269.4
277.2
285.1
370
380
390
400
410
10.7
10.9
11.1
11.2
11.4
16.7
17.0
17.3
17.7
18.0
27.6
28.3
29.0
29.6
30.3
41.2
42.2
43.3
44.3
45.4
70.8
72.6
74.5
76.3
78.2
128.7
132.1
135.5
138.9
142.3
292.9
300.8
308.6
316.5
324.3
420
430
440
450
460
11.5
11.7
11.9
12.0
12.2
18.3
18.7
19.0
19.4
19.7
31.0
31.7
32.4
33.0
33.7
46.4
47.5
48.5
49.6
50.6
80.0
81.8
83.7
85.5
87.4
145.7
149.1
152.5
155.9
159.4
332.2
340.0
347.9
355.7
363.6
470
480
490
500
510
12.4
12.5
12.7
12.9
13.0
20.0
20.4
20.7
21.0
21.4
34.4
35.1
35.7
36.4
37.1
51.7
52.1
53.7
54.8
55.8
89.2
91.1
92.9
94.8
96.6
162.8
166.2
169.6
173.0
176.4
371.4
379.3
387.1
395.0
402.8
520
530
540
550
560
13.2
13.3
13.5
13.7
13.8
21.7
22.0
22.4
22.7
23.0
37.8
38.5
39.1
39.8
40.5
56.9
57.9
59.0
60.0
61.1
98.4
100.3
102.1
104.0
105.8
179.8
183.2
186.6
190.0
193.4
410.7
418.5
426.4
434.2
442.1
570
580
590
600
610
14.0
14.2
14.3
14.5
14.6
23.4
23.7
24.0
24.4
24.7
41.2
41.8
42.5
43.2
43.9
62.1
63.1
64.2
65.2
66.3
107.7
109.5
111.4
113.2
115.0
196.9
200.3
203.7
207.1
210.5
449.9
457.8
465.6
473.5
481.3
620
630
640
650
660
14.8
15.0
15.1
15.3
15.5
25.0
25.4
25.7
26.0
26.4
44.6
45.2
45.9
46.6
47.3
67.3
68.4
69.4
70.5
71.5
116.9
118.7
120.6
122.4
124.3
213.9
217.3
220.7
224.1
227.5
489.2
497.0
504.9
512.7
520.6
670
680
690
700
710
15.6
15.8
15.9
16.1
16.3
26.7
27.0
27.4
27.7
28.0
41.9
48.6
49.3
50.0
50.7
72.5
73.6
74.6
75.7
76.1
126.1
128.0
129.8
131.6
133.5
230.9
234.4
237.8
241.2
244.6
528.4
536.3
544.1
552.0
559.8
720
730
740
750
760
16.4
16.6
16.8
16.9
17.1
28.4
28.7
29.0
29.4
29.7
51.3
52.0
52.7
53.4
54.0
77.8
78.8
79.9
80.9
82.0
135.3
137.2
139.0
140.9
142.7
248.0
251.4
254.8
258.2
261.6
567.7
575.5
583.4
591.2
599.0
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Inside
Dia.
d, mm
[Note (1)]
Minimum Wall Thickness — tm, mm
92
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
Table 3-A
ASME B16.34-2004
Valve Body Minimum Wall Thickness, tm, mm (Cont’d)
Inside
Dia.
d, mm
[Note (1)]
Class
150
Class
300
Class
600
Class
900
Class
1500
Class
2500
Class
4500
770
780
790
800
820
17.3
17.4
17.6
17.7
18.1
30.0
30.4
30.7
31.0
31.7
54.7
55.4
56.1
56.8
58.1
83.0
84.0
85.1
86.1
88.2
144.6
146.4
148.2
150.1
153.8
265.0
268.4
271.9
275.3
282.1
606.9
614.7
622.6
630.4
646.1
840
860
880
900
920
18.4
18.7
19.0
19.4
19.7
32.4
33.0
33.7
34.4
35.0
59.5
60.8
62.2
63.5
64.9
90.3
92.4
94.5
96.6
98.7
157.5
161.1
164.8
168.5
172.2
288.9
295.7
302.5
309.4
316.2
661.8
677.5
693.2
708.9
724.6
940
960
980
1000
1020
20.0
20.3
20.7
21.0
21.3
35.7
36.4
37.1
37.7
38.4
66.2
67.6
69.0
70.3
71.7
100.8
102.9
104.9
107.0
109.1
175.9
179.6
183.3
187.0
190.7
323.0
329.6
336.6
343.5
350.3
740.3
756.0
771.7
787.4
803.1
1040
1060
1080
1100
1120
21.7
22.0
22.3
22.6
23.0
39.1
39.7
40.4
41.1
41.7
73.0
74.4
75.7
77.1
78.4
111.2
113.3
115.4
117.5
119.6
194.3
198.0
201.7
205.4
209.1
357.1
363.9
370.7
377.5
384.4
818.8
834.5
850.2
865.9
881.6
1140
1160
1180
1200
1220
23.3
23.6
23.9
24.3
24.6
42.4
43.1
43.7
44.4
45.1
79.8
81.2
82.5
83.9
85.2
121.7
123.7
125.8
127.9
130.0
212.8
216.5
220.2
223.9
227.5
391.2
398.0
404.8
411.6
418.5
897.3
913.0
928.7
944.4
960.1
1240
1260
1280
1300
24.9
25.2
25.6
25.9
45.7
46.4
41.1
47.7
86.6
87.9
89.3
90.6
132.1
134.2
136.3
138.4
231.2
234.9
238.6
242.3
425.3
432.1
438.9
445.7
975.8
991.5
1007.2
1022.9
Minimum Wall Thickness — tm, mm
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
N0TE: (1) See para. 6.1.2.
93
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 3-B
Valve Body Minimum Wall Thickness, tm, in.
Minimum Wall Thickness — tm, in.
Class
150
Class
300
Class
600
Class
900
Class
1500
Class
2500
Class
4500
0.12
0.25
0.37
0.44
0.50
0.10
0.11
0.12
0.12
0.12
0.10
0.11
0.12
0.13
0.13
0.11
0.12
0.13
0.14
0.15
0.11
0.13
0.15
0.16
0.17
0.12
0.15
0.17
0.18
0.19
0.14
0.19
0.23
0.25
0.27
0.19
0.30
0.39
0.45
0.49
0.56
0.62
0.69
0.75
0.87
0.13
0.13
0.14
0.14
0.15
0.13
0.14
0.15
0.15
0.16
0.15
0.16
0.16
0.17
0.18
0.18
0.19
0.20
0.21
0.23
0.20
0.21
0.23
0.24
0.26
0.29
0.31
0.34
0.36
0.40
0.54
0.59
0.64
0.69
0.78
1.00
1.12
1.25
1.37
1.50
0.16
0.16
0.17
0.18
0.19
0.17
0.18
0.19
0.20
0.21
0.19
0.20
0.21
0.21
0.22
0.25
0.26
0.27
0.27
0.28
0.28
0.31
0.33
0.35
0.38
0.44
0.48
0.53
0.57
0.61
0.88
0.98
1.08
1.18
1.28
1.87
2.00
2.25
2.50
2.75
0.21
0.22
0.23
0.23
0.24
0.24
0.25
0.26
0.27
0.27
0.24
0.25
0.25
0.27
0.29
0.30
0.31
0.34
0.36
0.39
0.44
0.47
0.51
0.56
0.61
0.74
0.78
0.87
0.95
1.04
1.57
1.67
1.87
2.06
2.26
2.87
3.00
3.50
3.62
3.87
0.24
0.24
0.25
0.25
0.26
0.28
0.28
0.30
0.30
0.31
0.29
0.30
0.34
0.35
0.36
0.40
0.41
0.47
0.48
0.50
0.63
0.65
0.75
0.77
0.81
1.08
1.12
1.29
1.33
1.42
2.35
2.45
2.85
2.94
3.14
4.00
4.37
4.75
5.00
5.37
0.26
0.26
0.26
0.27
0.27
0.31
0.32
0.33
0.34
0.35
0.37
0.40
0.42
0.44
0.46
0.52
0.56
0.60
0.62
0.66
0.84
0.91
0.96
1.02
1.09
1.46
1.59
1.72
1.80
1.93
3.24
3.53
3.83
4.02
4.31
5.75
6.00
7.00
7.25
7.50
0.28
0.28
0.30
0.30
0.31
0.36
0.37
0.40
0.41
0.42
0.49
0.51
0.57
0.59
0.61
0.70
0.73
0.83
0.86
0.88
1.16
1.21
1.39
1.44
1.48
2.06
2.15
2.49
2.57
2.66
4.61
4.81
5.59
5.79
5.99
7.87
8.00
8.62
8.75
9.00
0.31
0.32
0.33
0.33
0.33
0.43
0.44
0.46
0.46
0.47
0.63
0.64
0.68
0.69
0.71
0.92
0.94
1.00
1.01
1.04
1.55
1.58
1.69
1.71
1.76
2.78
2.83
3.04
3.08
3.17
6.28
6.38
6.87
6.97
7.16
9.37
9.50
9.75
10.00
10.37
0.34
0.34
0.34
0.35
0.35
0.48
0.49
0.50
0.50
0.52
0.74
0.74
0.76
0.78
0.80
1.08
1.09
1.12
1.14
1.18
1.83
1.85
1.90
1.94
2.01
3.29
3.34
3.42
3.51
3.64
7.45
7.56
7.75
7.95
8.24
94
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Inside
Dia.
d, in.
[Note (1)]
VALVES — FLANGED, THREADED, AND WELDING END
Table 3-B
ASME B16.34-2004
Valve Body Minimum Wall Thickness, tm, in. (Cont’d)
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Inside
Dia.
d, in.
[Note (1)]
Minimum Wall Thickness — tm, in.
Class
150
Class
300
Class
600
Class
900
Class
1500
Class
2500
Class
4500
10.87
11.00
11.12
11.37
11.75
0.36
0.36
0.37
0.37
0.38
0.53
0.54
0.54
0.55
0.56
0.84
0.85
0.85
0.87
0.90
1.24
1.25
1.26
1.29
1.33
2.10
2.13
2.15
2.20
2.27
3.81
3.85
3.89
3.98
4.11
8.63
8.73
8.83
9.02
9.32
12.00
12.25
12.87
13.00
13.12
0.38
0.38
0.39
0.40
0.40
0.57
0.58
0.60
0.60
0.61
0.91
0.93
0.97
0.98
0.99
1.35
1.38
1.44
1.46
1.47
2.31
2.36
2.47
2.50
2.52
4.19
4.28
4.49
4.53
4.57
9.52
9.71
10.20
10.30
10.40
13.25
13.50
14.00
14.62
14.75
14.87
15.00
15.25
15.75
16.00
0.40
0.41
0.41
0.42
0.43
0.43
0.43
0.43
0.44
0.45
0.61
0.62
0.64
0.66
0.66
0.67
0.67
0.68
0.70
0.70
1.00
1.01
1.05
1.09
1.10
1.11
1.12
1.13
1.17
1.18
1.48
1.51
1.56
1.63
1.64
1.65
1.67
1.69
1.75
1.77
2.54
2.59
2.68
2.80
2.82
2.84
2.87
2.91
3.00
3.05
4.62
4.70
4.87
5.08
5.13
5.17
5.21
5.30
5.47
5.55
10.50
10.70
11.09
11.57
11.68
11.77
11.87
12.07
12.46
12.66
16.37
16.50
17.00
17.25
17.50
0.45
0.45
0.46
0.47
0.47
0.72
0.72
0.74
0.75
0.75
1.21
1.22
1.25
1.27
1.29
1.81
1.82
1.88
1.90
1.93
3.12
3.14
3.24
3.28
3.33
5.68
5.73
5.90
5.98
6.07
12.95
13.05
13.44
13.64
13.84
17.62
18.00
18.25
18.87
19.00
0.47
0.48
0.48
0.49
0.49
0.76
0.77
0.78
0.80
0.80
1.29
1.32
1.34
1.38
1.39
1.94
1.98
2.01
2.07
2.09
3.35
3.42
3.47
3.58
3.60
6.11
6.24
6.32
6.53
6.58
13.93
14.23
14.42
14.91
15.01
19.25
19.62
20.00
20.12
20.37
20.75
21.00
21.25
22.00
22.62
0.50
0.50
0.51
0.51
0.52
0.52
0.53
0.53
0.54
0.55
0.81
0.83
0.84
0.84
0.85
0.86
0.87
0.88
0.90
0.93
1.40
1.43
1.46
1.46
1.48
1.51
1.52
1.54
1.59
1.63
2.11
2.15
2.19
2.20
2.23
2.27
2.29
2.32
2.40
2.46
3.65
3.72
3.79
3.81
3.86
3.93
3.97
4.02
4.16
4.27
6.66
6.79
6.92
6.96
7.04
7.17
7.26
7.34
7.60
7.81
15.21
15.50
15.80
15.89
16.09
16.39
16.58
16.78
17.37
17.85
22.75
23.00
23.25
23.75
24.00
0.56
0.56
0.56
0.57
0.58
0.93
0.94
0.95
0.96
0.97
1.64
1.66
1.68
1.71
1.73
2.48
2.50
2.53
2.58
2.61
4.30
4.34
4.39
4.48
4.53
7.86
7.94
8.03
8.20
8.28
17.96
18.15
18.35
18.74
18.94
95
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
VALVES — FLANGED, THREADED, AND WELDING END
Table 3-B
Valve Body Minimum Wall Thickness, tm, in. (Cont’d)
Class
150
Class
300
Class
600
Class
900
Class
1500
Class
2500
Class
4500
24.25
24.62
25.00
25.25
25.50
0.57
0.58
0.58
0.59
0.59
0.98
0.99
1.00
1.01
1.02
1.74
1.77
1.79
1.81
1.83
2.63
2.67
2.71
2.74
2.76
4.57
4.64
4.71
4.76
4.80
8.37
8.49
8.62
8.71
8.79
19.13
19.42
19.72
19.92
20.11
26.00
26.25
26.37
27.00
27.25
0.60
0.60
0.60
0.62
0.62
1.04
1.05
1.05
1.07
1.08
1.86
1.88
1.89
1.93
1.95
2.82
2.84
2.86
2.92
2.95
4.90
4.94
4.96
5.08
5.13
8.96
9.05
9.09
9.30
9.39
20.51
20.70
20.80
21.29
21.49
27.37
28.00
28.25
29.00
29.25
0.62
0.63
0.64
0.65
0.65
1.08
1.10
1.11
1.14
1.15
1.95
2.00
2.01
2.07
2.08
2.96
3.03
3.05
3.13
3.16
5.15
5.26
5.31
5.45
5.49
9.43
9.65
9.73
9.99
10.07
21.58
22.08
22.27
22.86
23.06
30.00
31.00
32.00
33.00
34.00
0.66
0.68
0.70
0.71
0.73
1.17
1.20
1.24
1.27
1.30
2.13
2.20
2.27
2.34
2.40
3.23
3.34
3.44
3.55
3.65
5.63
5.82
6.00
6.19
6.37
10.33
10.67
11.01
11.35
11.69
23.65
24.43
25.22
26.00
26.79
35.00
36.00
37.00
38.00
39.00
0.75
0.76
0.78
0.79
0.81
1.34
1.37
1.40
1.44
1.47
2.47
2.54
2.61
2.68
2.74
3.76
3.86
3.97
4.07
4.18
6.56
6.74
6.92
7.11
7.29
12.03
12.37
12.71
13.05
13.40
27.57
28.36
29.14
29.93
30.71
40.00
41.00
42.00
43.00
44.00
0.83
0.84
0.86
0.88
0.89
1.51
1.54
1.57
1.61
1.64
2.81
2.88
2.95
3.01
3.08
4.28
4.38
4.49
4.59
4.70
7.48
7.66
7.85
8.03
8.21
13.74
14.08
14.42
14.76
15.10
31.50
32.28
33.06
33.85
34.63
45.00
46.00
47.00
48.00
49.00
0.91
0.92
0.94
0.96
0.97
1.67
1.71
1.74
1.77
1.81
3.15
3.22
3.29
3.35
3.42
4.80
4.91
5.01
5.12
5.22
8.40
8.58
8.77
8.95
9.14
15.44
15.78
16.12
16.46
16.80
35.42
36.20
36.99
37.77
38.56
50.00
0.99
1.84
3.49
5.32
9.32
17.15
39.34
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Inside
Dia.
d, in.
[Note (1)]
Minimum Wall Thickness — tm, in.
NOTE (1) See para. 6.1.2.
96
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
VALVES — FLANGED, THREADED, AND WELDING END
ASME B16.34-2004
Minimum Wall Thickness for Socket Welding and Threaded Ends
Table 4
C
C
C
Classes
150 and 300
Class 600
C
C
Class 8001
C
Class 900
Class 1500
Class 2500
Class 4500
Minimum Wall Thickness, C
NPS
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
⁄8
⁄4
3
⁄8
3.0
3.0
3.0
0.12
0.12
0.12
3.0
3.3
3.6
0.12
0.13
0.14
3.0
3.3
3.6
0.12
0.13
0.14
3.6
4.1
4.3
0.14
0.16
0.17
3.6
4.1
4.3
0.14
0.16
0.17
5.3
6.6
7.1
0.21
0.26
0.28
5.6
7.4
9.4
0.22
0.29
0.37
1
1
11⁄4
3.3
3.6
3.8
3.8
0.13
0.14
0.15
0.15
4.1
4.3
5.1
5.3
0.16
0.17
0.20
0.21
4.1
4.3
5.1
5.3
0.16
0.17
0.20
0.21
5.3
6.1
6.9
7.1
0.21
0.24
0.27
0.28
5.3
6.1
6.9
8.1
0.21
0.24
0.27
0.32
8.1
8.6
9.9
11.7
0.32
0.34
0.39
0.46
11.2
13.0
15.7
19.1
0.44
0.51
0.62
0.75
11⁄2
2
21⁄2
4.1
4.6
5.6
0.16
0.18
0.22
5.6
6.1
7.6
0.22
0.24
0.30
5.8
6.9
7.9
0.23
0.27
0.31
7.9
9.7
10.4
0.31
0.38
0.41
8.9
10.7
12.4
0.35
0.42
0.49
13.0
15.7
18.5
0.51
0.62
0.73
21.3
25.9
31.0
0.84
1.02
1.22
1
1
3
⁄2
⁄4
NOTE:
(1) Class 800 is not a tabulated ASME B16.34 designation. It is an intermediate class that is widely used for socket welding and threaded end valves.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
97
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
98
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX I
RADIOGRAPHY EXAMINATION: PROCEDURE AND ACCEPTANCE
STANDARDS
I-1 RADIOGRAPHY PROCEDURE
I-1.8
I-1.1
ASTM E 94, Recommended Practice for Radiographic
Testing, and ASTM E 142, Controlling Quality of Radiographic Testing, shall be used as a guide.
Radiographs shall be within the following photographic (H & D) density range:
(a) single film viewing — 1.5 min., 4.0 max.
(b) superimposed viewing of double film, each single
film — 1.00 min., 2.5 max., with a double film — 4.0 max.
I-1.2
I-1.9
The film shall be as close as practical to the part being
radiographed.
Surfaces shall be such that radiographic contrast due
to surface condition cannot mask or be confused with
that of any defect.
I-1.3
I-1.10
Any commercially available intensifying screen,
except those of the fluorescent type, may be used.
Single wall thickness shall be radiographed wherever
practical.
I-1.4
I-1.11
All film shall bear identification markers to properly
orient the film for interpretation and to denote the actual
part under examination. Film shall be marked to identify
the organization producing the radiograph and the date
exposed.
The radiographic sensitivity shall be 2 – 4T for thickness up to and including 19 mm (0.75 in.) and 2 – 2T
for thickness greater than 19 mm (0.75 in.).
I-2 ACCEPTANCE STANDARDS
I-1.5
I-2.1
Penetrameters shall be used on each radiograph. Penetrameters shall conform to the requirements of ASTM
E 142.
For wall thickness t ≤ 50 mm (t ≤ 2 in.) the comparative
plates of ASTM E 446 define acceptable indications as
shown in Table I-1.
I-1.6
I-2.2
Any commercially available film may be used, provided it is equal to or finer grained than Type 2, ASTM
E 94.
For wall thickness 50 mm ≤ t < 115 mm (2 in. ≤ t
< 4.5 in.) the comparative plates of ASTM E 186 define
acceptable indications as shown in Table I-2.
I-1.7
I-2.3
The manufacturer, at his option, may use a double
film technique and a combination of a single and double
viewing so as to cover a greater latitude in part thickness
with a single exposure.
For wall thickness 115 mm ≤ t ≤ 305 mm (4.5 in. ≤ t
≤ 12 in.) the comparative plates of ASTM E 280 define
acceptable indications as shown in Table I-3.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
99
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX I
Table I-1
Acceptance Criteria for Thickness per para. I-2.1
Discontinuity Type
Category
Acceptable
Comparative Plate
ASTM E 446
Gas
Sand
Shrink, Type 1
Shrink, Type 2
Shrink, Type 3
Shrink, Type 4
Hot tears and cracks
Inserts (chills, chaplets)
A
B
C
C
C
C
D&E
F
A2
B3
CA2
CB3
CC3
CD3
None
None
Table I-3
Acceptance Criteria for Thickness per para. I-2.3
Discontinuity Type
Category
Acceptable
Comparative Plate
ASTM E 280
Gas Porosity
Sand and slag inclusions
Shrink, Type 1
Shrink, Type 2
Shrink, Type 3
Crack
Hot tear
Insert
A
B
C
C
C
D
E
F
A3
B3
CA3
CB3
CC3
None
None
None
Table I-2
Acceptance Criteria for Thickness per para. I-2.2
Discontinuity Type
Category
Acceptable
Comparative Plate
ASTM E 186
Gas Porosity
Sand and slag inclusions
Shrink, Type 1
Shrink, Type 2
Shrink, Type 3
Crack
Hot tear
Insert
A
B
C
C
C
D
E
F
A3
B3
CA3
CB3
CC3
None
None
None
100
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX II
MAGNETIC PARTICLE EXAMINATION: PROCEDURE AND
ACCEPTANCE STANDARDS
II-1 PROCEDURE
(2) 13 mm (0.5 in.) dia. for materials over 13 mm
(0.5 in.) thick
Four or more rounded indications in a line separated
by 1.5 mm (0.06 in.) or less edge to edge are unacceptable.
Rounded indications are those which are not defined as
linear indications.
Magnetic particle examination procedure for castings
shall be in accordance with ASTM E 709, Standard Recommended Practice for Magnetic Particle Examination.
For forgings, plates, and bars, the examination procedures shall be in accordance with ASTM A 275, Magnetic
Particle Examination of Steel Forgings.
II-2.2 Forgings and Rolled or Wrought Material
Maximum acceptable indications are as follows:
(a) Linear Indications:
(1) 5 mm (0.2 in.) long for materials up to 13 mm
(0.5 in.) thick
(2) 10 mm (0.4 in.) long for materials over 13 mm
(0.5 in.) to 25 mm (1 in.) thick
(3) 15 mm (0.6 in.) long for materials over 25 mm
(1.0 in.) thick.
For linear indications, the indications must be separated by a distance greater than the length of an acceptable indication. A linear indication is one with length
in excess of 3 times the width.
(b) Rounded Indications
(1) 5 mm (0.2 in.) dia. for materials up to 13 mm
(0.5 in.) thick
(2) 8 mm (0.3 in.) dia. for materials over 13 mm
(0.5 in.) thick.
Four or more rounded indications in a line separated
by a 1.5 mm (0.06 in.) or less edge-to-edge are unacceptable. Rounded indications are those which are not
defined as linear indications.
II-2 ACCEPTANCE STANDARDS1
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
II-2.1 Castings
Maximum acceptable indications are as follows:
(a) Linear Indications:
(1) 8 mm (0.3 in.) long for materials up to 13 mm
(0.5 in.) thick
(2) 13 mm (0.5 in.) long for materials 13 mm to 25
mm (0.5 in. to 1.0 in.) thick
(3) 18 mm (0.7 in.) long for materials over 25 mm
(1.0 in.) thick
For linear indications, the indications must be separated by a distance greater than the length of an acceptable indication. A linear indication is one with length
in excess of 3 times the width.
(b) Rounded Indications:
(1) 8 mm (0.3 in.) dia. for materials up to 13 mm
(0.5 in.) thick
1
An indication may be larger than the imperfection that causes
it. However, the size of the indication is the basis for acceptance
evaluation.
101
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX III
LIQUID PENETRANT EXAMINATION: PROCEDURE AND
ACCEPTANCE STANDARDS
III-1 PROCEDURE
Four or more rounded indications in a line separated
by 1.5 mm (0.06 in.) or less edge-to-edge are unacceptable. Rounded indications are those that are not defined
as linear indications.
Liquid penetrant procedure shall be in accordance
with ASTM E 165.
III-2 ACCEPTANCE STANDARDS1
III-2.2 Forgings and Rolled or Wrought Material
III-2.1 Castings
Maximum acceptable indications are as follows:
(a) Linear Indications
(1) 8 mm (0.3 in.) long for materials up to 13 mm
(0.5 in.) thick
(2) 13 mm (0.5 in.) long for materials 13 mm to 25
mm (0.5 in. to 1.0 in.) thick
(3) 18 mm (0.7 in.) long for materials over 25 mm
(1.0 in.) thick
For linear indications, the indications must be separated by a distance greater than the length of an acceptable indication. A linear indication is one with length
in excess of 3 times the width.
(b) Rounded Indications
(1) 8 mm (0.3 in.) diameter for materials up to 13
mm (0.5 in.) thick
(2) 13 mm (0.5 in.) diameter for materials over 13
mm (0.5 in.) thick
Maximum acceptable indications are as follows:
(a) Linear Indications
(1) 5 mm (0.2 in.) long for materials 13 mm (0.5 in.)
or less thick
(2) 10 mm (0.4 in.) long for materials over 13 mm
(0.5 in.) to 25 mm (1.0 in.) thick
(3) 15 mm (0.6 in.) long for materials over 25 mm
(1.0 in.) thick
For linear indications, the indications must be separated by a distance greater than the length of an acceptable indication. A linear indication is one with length
in excess of 3 times the width.
(b) Rounded Indications
(1) 5 mm (0.2 in.) diameter for materials up to 13
mm (0.5 in.) thick
(2) 8 mm (0.3 in.) diameter for materials over 13
mm (0.5 in.) thick
Four or more rounded indications in a line separated
by 1.5 mm (0.06 in.) or less edge to edge are unacceptable.
Rounded indications are those that are not defined as
linear indications.
1
An indication may be larger than the imperfection that causes
it. However, the size of the indication is the basis for acceptance
evaluation.
102
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX IV
ULTRASONIC EXAMINATION: PROCEDURE AND ACCEPTANCE
STANDARDS
IV-1
PROCEDURE
IV-2.2 Angle Beam Examination
Indications which are equal to or exceed those
obtained from a 60 deg V-notch, 25 mm (1.0 in.) long
and having a depth not greater than 5% of the nominal
wall thickness in a test piece are unacceptable.
Ultrasonic examination procedure shall meet the
requirements of ASTM A 388 for forgings, bars, plates,
and tubular products and ASTM A 609 for castings.
IV-2
ACCEPTANCE STANDARDS
IV-2.1 Straight Beam Examination
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Indications which are equal to or exceed that
obtained from a 6.4 mm (0.25 in.) diameter flat bottomed hole in a calibration test piece of thickness
equal to the defect depth are unacceptable.
103
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
V-1
GENERAL
psp p Special Class rated working pressure for the
specified material at temperature T as determined by the method of Nonmandatory
Appendix B. These Special Class working pressures are tabulated in Table 2 having a designation of “Special Class.” The tabulated values
shall be used for establishing Limited Class
ratings.
y p a material coefficient having values as listed
in Table V-1
This Appendix covers alternative requirements for
valves having either threaded or welding ends and is
specifically restricted to sizes NPS 2 1 ⁄2 and smaller.
Valves complying with the requirements of this Appendix may be designated as Limited Class. There is no
provision for this designation for flanged end valves.
V-1.2 Applicability
In no case shall the working pressure increase with
increasing temperature. This shall be verified by the
manufacturer for all rating points greater than 900°F for
ferritic steels and 1050°F for austenitic steels.
The paragraphs of this Appendix are numbered corresponding with those of the body of the Standard. All
requirements for Standard Class valves are applicable
to Limited Class except as otherwise modified by this
Appendix.
V-2.1.6 Fabrication by Welding. Fabricated valves that
are identified as Limited Class shall conform with the
requirements of para. 2.1.6(c)(2) for Special Class.
V-4.2.3 Rating. Valves shall be marked on the valve
body with the number for the appropriate pressure rating class designation except that Limited Class and
Intermediate Rating Limited Class may instead be
marked on the valve body with a specific rated pressure
and temperature. For all valves in Limited Class, the
identification plate shall show the applicable pressure
rating at 38°C (100°F) and other markings required by
MSS SP-25. Valves conforming to Limited Class requirements, and acknowledged as such, shall include the designation “B16.34LTD” on the identification plate.
V-2.1 General
Valves conforming to the requirements of this Appendix and identified as Limited Class shall be suitable for
pressure-temperature ratings determined in accordance
with para. V-2.1.3. Threaded end valves rated above
Class 2500 and socket-weld-end valves rated above Class
4500 are not within the scope of this Standard.
V-2.1.3 Limited Class Rating Method. Pressure-temperature ratings for Limited Class valves are established
for Group 1 and Group 2 materials of Table V-1 by the
equation
V-6.1 Body Dimensions
Limited Class is restricted in application to valve body
geometries that have internal wetted pressure boundary
surfaces that are generally characterized by cylindrical
7000
pld p
p
7000 – (y – 0.4)Pr sp
where
pld p Limited Class rated working pressure for the
specified material at temperature T
Pr p pressure class rating index. For all designations Class 300 through 4500, Pr is equal to the
Class designation number (e.g., for Class 300,
Pr p 300). For Class 150, Pr p 115. For a rating
designation between Class 150 and Class 300,
the interpolation shall be made using Pr p 115
for Class 150. The equation is not valid for Pr
greater than 4500.
Table V-1
Material Coefficient, y
Applicable Temperature
Material
Ferritic steels
Austenitic steels
Other ductile
materials
480°C
620°C
(900°F)
(1150°F)
and 510°C 538°C 565°C 595°C
and
below (950°F) (1000°F) (1050°F) (1100°F) above
0.4
0.4
0.5
0.4
0.7
0.4
0.7
0.4
0.7
0.5
0.7
0.7
0.4
0.4
0.4
0.4
0.4
0.4
104
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
MANDATORY APPENDIX V
REQUIREMENTS FOR LIMITED CLASS VALVES
MANDATORY APPENDIX V
ASME B16.34-2004
d⬘
Tb
r
Af
Am
LN
Tr
d
LA
Fig. V-1 Limited Class Stress Area Limits
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
passages, cylindrical or spherical chambers, and intersections thereof.
where
So p the lesser value of either two-thirds of the yield
strength, one quarter of the ultimate tensile
strength, or the allowable stress of the body
material at 38°C (100°F) as listed in the ASME
Boiler and Pressure Vessel Code, Section II, Part
D, for either Section I or Section VIII, Div. 1;
po p rated working pressure at 38°C (100°F)
Af p fluid area (see Fig. V-1)
Am p metal area (see Fig. V-1)
V-6.1.1 Wall Thickness. For inspection purposes, the
minimum thickness of the wall surrounding the body
run flow passage shall be as shown in Table 3A or 3B
as applicable.
V-6.1.2 Inside Diameter. For the purpose of determining flow passageway wall thickness, the inside diameter
d (see Fig. V-1), is the diameter of the cylindrical flow
passage.
The fluid area and metal area are determined from
a drawing of the valve body crotch region in the
mutual plane of the bonnet and flow passage center
lines (see Fig. V-1).1 The fluid and metal areas are to be
based on the most adverse combination of dimensions
permitted by tolerances. In Fig. V-1, the distances LN
and LA which define fluid and metal area boundaries
are determined as
V-6.1.3 Valve Body Necks. The minimum thickness of
the wall for the body neck shall be that shown in Table
3A or 3B with d for this determination taken as twothirds of d′ where d′ is the inside diameter of the body
neck. In no case shall the body neck thickness be less than
the minimum value determined for the flow passage in
para. V-6.1.1. For values of body neck inside diameter
not shown in Table 3A or 3B as applicable, interpolation
is permitted.
LN p 0.5r + 0.354 冪Tb(d′ + Tb)
V-6.1.5 Contours for Body Run Transitions. The
requirements of para. 6.1.5 are not applicable to Limited
Class.
and LA as the larger of
LA p 0.5d′ – Tb
V-6.1.8 Additional Metal Thickness. For Limited
Class, it is required that metal thickness reinforcement
be provided to satisfy the following:
So ≥ po
冢
Af
+ 0.5
Am
or
LA p Tr
冣
1
For guidance in regard to other valve configurations, see ASME
Boiler and Pressure Vessel Code, Section III, NB-3545.
105
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX V
where
d′ p body neck inside diameter at crotch region
Tb p neck wall thickness at crotch region
Tr p body run wall thickness at crotch region
r p external fillet radius at crotch
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
If a calculated boundary lies beyond the body run end
or neck end, the sections to be used for area determination shall terminate at the body run end or neck end.
106
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
MANDATORY APPENDIX VI
BASIS EQUATIONS FOR MINIMUM WALL THICKNESS
Minimum wall thickness requirements may be satisfied by compliance with either the values shown in Table
3A or 3B as applicable or the use of the equations listed
in this Appendix. 1 Refer to para. 1.2.6 concerning
valid units.
1
The wall thickness values obtained from either Table 3A, Table
3B, or the equations given in this Appendix are not to be interpreted
as design values. They are,in basic terms, minimum requirements
that must be met in order to be in conformity with this Standard.
107
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VI
Table VI-1
Basis Equations for Minimum Wall Thickness
Diameter, d
mm
150
150
150
3 ≤ d < 50
50 ≤ d ≤ 100
100 < d ≤ 1300
tm (150) p 0.064 d + 2.34
tm (150) p 0.020 d + 4.5
tm (150) p 0.0163 d + 4.70
off, one decimal
off, one decimal
off, one decimal
300
300
300
3 ≤ d < 50
50 ≤ d ≤ 100
100 < d ≤ 1300
tm (300) p 0.080 d + 2.29
tm (300) p 0.030 d + 4.83
tm (300) p 0.0334 d + 4.32
off, one decimal
off, one decimal
off, one decimal
600
600
600
3 ≤ d < 25
25 ≤ d ≤ 50
50 < d ≤ 1300
tm (600) p 0.090 d + 2.54
tm (600) p 0.060 d + 3.30
tm (600) p 0.06777 d + 2.54
off, one decimal
off, one decimal
off, one decimal
900
900
900
3 ≤ d < 25
25 ≤ d ≤ 50
50 < d ≤ 1300
tm (900) p 0.160 d + 2.29
tm (900) p 0.060 d + 4.83
tm (900) p 0.10449 d + 2.54
off, one decimal
off, one decimal
off, one decimal
1500
2500
4500
3 ≤ d ≤ 1300
3 ≤ d ≤ 1300
3 ≤ d ≤ 1300
tm (1500) p 0.18443 d + 2.54
tm (2500) p 0.34091 d + 2.54
tm (4500) p 0.78488 d + 2.54
off, one decimal
off, one decimal
off, one decimal
Class
Pc
Diameter, d
in.
150
150
150
0.12 ≤ d < 2
2≤d<4
4 < d < 50
tm (150) p 0.064 d + 0.092
tm (150) p 0.020 d + 0.18
tm (150) p 0.0163 d + 0.185
off, two decimals
off, two decimals
off, two decimals
300
300
300
0.12 ≤ d < 2
2≤d≤4
4 < d ≤ 50
tm (300) p 0.080 d + 0.09
tm (300) p 0.030 d + 0.19
tm (300) p 0.0334 d + 0.17
off, two decimals
off, two decimals
off, two decimals
600
600
600
0.12 ≤ d < 1
1≤d≤2
2 < d ≤ 50
tm (600) p 0.090 d + 0.10
tm (600) p 0.060 d + 0.13
tm (600) p 0.06777 d + 0.10
off, two decimals
off, two decimals
off, two decimals
900
900
900
0.12 ≤ d < 1
1≤d≤2
2 < d ≤ 50
tm (900) p 0.160 d + 0.09
tm (900) p 0.060 d + 0.19
tm (900) p 0.10449 d + 0.10
off, two decimals
off, two decimals
off, two decimals
1500
2500
4500
0.12 ≤ d ≤ 50
0.12 ≤ d ≤ 50
0.12 ≤ d ≤ 50
tm (1500) p 0.18443 d + 0.10
tm (2500) p 0.34091 d + 0.10
tm (4500) p 0.78488 d + 0.10
off, two decimals
off, two decimals
off, two decimals
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Class
Pc
Metric eq., tm
mm
Round
Inch eq., tm
in.
Round
108
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
PRESSURE-TEMPERATURE RATINGS: U.S. CUSTOMARY UNITS
(For Metric units see Table 2.)
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
109
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Ratings For Group 1.1 Materials
Table VII-2-1.1
A 105 (1)(2)
A 216 Gr. WCB (1)
A 350 Gr. LF2 (1)
A 515 Gr. 70 (1)
A 516 Gr. 70 (1)(3)
A 537 Cl. 1 (5)
A 696 Gr. C
A 350 Gr. LF6 Cl.1 (4)
A 350 Gr. LF3 (6)
A 672 Gr. B70 (1)
A 672 Gr. C70 (1)
NOTES:
(1) Upon prolonged exposure to temperatures above 800°F, the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged use above 800°F.
(2) Only killed steel shall be used above 850°F.
(3) Not to be used over 850°F.
(4) Not to be used over 500°F.
(5) Not to be used over 700°F.
(6) Not to be used over 650°F.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
285
260
230
200
170
740
680
655
635
605
1,480
1,360
1,310
1,265
1,205
2,220
2,035
1,965
1,900
1,810
3,705
3,395
3,270
3,170
3,015
6,170
5,655
5,450
5,280
5,025
11,110
10,185
9,815
9,505
9,040
600
650
700
750
800
140
125
110
95
80
570
550
530
505
410
1,135
1,100
1,060
1,015
825
1,705
1,650
1,590
1,520
1,235
2,840
2,745
2,665
2,535
2,055
4,730
4,575
4,425
4,230
3,430
8,515
8,240
7,960
7,610
6,170
850
900
950
1000
65
50
35
20
320
230
135
85
640
460
275
170
955
690
410
255
1,595
1,150
685
430
2,655
1,915
1,145
715
4,785
3,455
2,055
1,285
B – Special Class
Working Pressure by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
285
280
280
750
750
740
735
735
1,500
1,500
1,480
1,465
1,465
2,250
2,250
2,220
2,200
2,200
3,750
3,750
3,700
3,665
3,665
6,250
6,250
6,170
6,105
6,105
11,250
11,250
11,105
10,995
10,995
600
650
700
750
800
280
275
265
245
195
735
715
690
635
515
1,465
1,430
1,380
1,270
1,030
2,200
2,145
2,075
1,905
1,545
3,665
3,575
3,455
3,170
2,570
6,105
5,960
5,760
5,285
4,285
10,995
10,730
10,365
9,515
7,715
850
900
950
1000
155
110
65
40
400
285
170
105
795
575
345
215
1,195
860
515
320
1,995
1,435
855
535
3,320
2,395
1,430
895
5,980
4,305
2,570
1,605
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
110
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-1.2
A 106 Gr. C (1)
A 203 Gr. B (2)
Ratings For Group 1.2 Materials
A 203 Gr. E (2)
A 216 Gr. WCC (2)
A 350 Gr. LF6 Cl. 2 (3)
A 352 Gr. LC2 (4)
A 352 Gr. LC3 (4)
A 352 Gr. LCC (4)
NOTES:
(1) Not to be used over 800°F.
(2) Upon prolonged exposure to temperatures above 800°F, the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged use above 800°F.
(3) Not to be used over 500°F.
(4) Not to be used over 650°F.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
750
730
705
665
1,500
1,500
1,455
1,405
1,330
2,250
2,250
2,185
2,110
1,995
3,750
3,750
3,640
3,520
3,325
6,250
6,250
6,070
5,865
5,540
11,250
11,250
10,925
10,555
9,965
600
650
700
750
800
140
125
110
95
80
605
590
555
505
410
1,210
1,175
1,110
1,015
825
1,815
1,765
1,665
1,520
1,235
3,025
2,940
2,775
2,535
2,055
5,040
4,905
4,630
4,230
3,430
9,070
8,825
8,330
7,610
6,170
850
900
950
1000
65
50
35
20
320
225
135
85
640
445
275
170
955
670
410
255
1,595
1,115
685
430
2,655
1,855
1,145
715
4,785
3,345
2,055
1,285
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
290
290
290
750
750
750
750
750
1,500
1,500
1,500
1,500
1,500
2,250
2,250
2,250
2,250
2,250
3,750
3,750
3,750
3,750
3,750
6,250
6,250
6,250
6,250
6,250
11,250
11,250
11,250
11,250
11,250
600
650
700
750
800
290
290
280
280
255
750
750
715
635
515
1,500
1,500
1,425
1,270
1,030
2,250
2,250
2,140
1,905
1,545
3,750
3,750
3,565
3,170
2,570
6,250
6,250
5,940
5,285
4,285
11,250
11,250
10,690
9,515
7,715
850
900
950
1000
200
140
85
55
400
280
170
105
795
555
345
215
1,195
835
515
320
1,995
1,395
855
535
3,320
2,320
1,430
895
5,980
4,180
2,570
1,605
111
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Ratings For Group 1.3 Materials
Table VII-2-1.3
A 203 Gr. A (1)
A 203 Gr. D (1)
A 217 Gr. WC1 (6)(7)
A 352 Gr. LCB (2)
A 352 Gr. LC1 (2)
A 515 Gr. 65 (1)
A 516 Gr. 65 (1)(3)
A 675 Gr. 65 (1)(4)(5)
A 672 Gr. B65 (1)
A 672 Gr. C65 (1)
NOTES:
(1) Upon prolonged exposure to temperatures above 800°F, the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged use above 800°F.
(2) Not to be used over 650°F.
(3) Not to be used over 850°F.
(4) Leaded grades shall not be used where welded or in any application above 500°F.
(5) For service temperatures above 850°F, it is recommended that killed steel containing not less than 0.10% residual silicon be used.
(6) Upon prolonged exposure to temperatures above 875°F, the carbide phase of steel of carbon-molybdennum steel may
be converted to graphite. Permissible, but not recommended for prolonged use above 875°F.
(7) Use normalized and tempered material only.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
265
255
230
200
170
695
660
640
615
585
1,395
1,320
1,275
1,230
1,175
2,090
1,980
1,915
1,845
1,760
3,480
3,300
3,190
3,075
2,930
5,805
5,505
5,315
5,125
4,885
10,445
9,905
9,565
9,225
8,795
600
650
700
750
800
140
125
110
95
80
550
535
510
475
390
1,105
1,065
1,025
955
780
1,655
1,600
1,535
1,430
1,175
2,755
2,665
2,560
2,385
1,955
4,595
4,440
4,270
3,970
3,255
8,270
7,990
7,685
7,150
5,865
850
900
950
1000
65
50
35
20
300
200
135
85
595
405
275
170
895
605
410
255
1,490
1,010
685
430
2,485
1,685
1,145
715
4,475
3,035
2,055
1,285
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
290
290
290
695
695
695
695
695
1,395
1,395
1,395
1,395
1,395
2,090
2,090
2,090
2,090
2,090
3,480
3,480
3,480
3,480
3,480
5,805
5,805
5,805
5,805
5,805
10,445
10,445
10,445
10,445
10,445
600
650
700
750
800
290
290
280
280
245
695
695
660
595
490
1,395
1,390
1,320
1,190
975
2,090
2,080
1,985
1,785
1,465
3,480
3,470
3,305
2,980
2,445
5,805
5,780
5,510
4,965
4,070
10,445
10,405
9,915
8,935
7,330
850
900
950
1000
185
125
85
55
375
255
170
105
745
505
345
215
1,120
760
515
320
1,865
1,265
855
535
3,105
2,105
1,430
895
5,595
3,795
2,570
1,605
112
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-1.4
A 106 Gr. B (1)
A 350 Gr. LF1 (1)
A 515 Gr. 60 (1)(2)
Ratings For Group 1.4 Materials
A 516 Gr. 60 (1)(2)
A 675 Gr. 60 (1)(2)(3)
A 675 Gr. 65 (1)(3)(4)
A 696 Gr. B
A 672 Gr. B60 (1)
A 672 Gr. C60 (1)
NOTES:
(1) Upon prolonged exposure to temperatures above 800°F, the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged use above 800°F.
(2) Not to be used over 850°F.
(3) Leaded grades shall not be used where welded or in any application above 500°F.
(4) For service temperatures above 850°F, it is recommended that killed steels containing not less than 0.10% residual silicon be used.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
235
215
210
200
170
615
565
545
525
500
1,235
1,130
1,090
1,055
1,005
1,850
1,695
1,635
1,580
1,505
3,085
2,830
2,725
2,635
2,510
5,145
4,715
4,545
4,390
4,185
9,255
8,485
8,175
7,900
7,530
600
650
700
750
800
140
125
110
95
80
475
455
440
430
370
945
915
885
855
740
1,420
1,370
1,325
1,285
1,110
2,365
2,285
2,210
2,140
1,850
3,945
3,805
3,685
3,565
3,085
7,095
6,850
6,635
6,420
5,555
850
900
950
1000
65
50
35
20
300
170
135
85
595
345
275
170
895
515
410
255
1,490
855
685
430
2,485
1,430
1,145
715
4,475
2,570
2,055
1,285
B – Special Class
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
245
245
245
245
245
645
645
645
645
645
1,285
1,285
1,285
1,285
1,285
1,930
1,930
1,930
1,930
1,930
3,215
3,215
3,215
3,215
3,215
5,355
5,355
5,355
5,355
5,355
9,645
9,645
9,645
9,645
9,645
600
650
700
750
800
235
230
220
215
175
615
595
575
555
465
1,230
1,190
1,150
1,115
925
1,850
1,785
1,730
1,670
1,390
3,080
2,975
2,880
2,785
2,315
5,135
4,955
4,800
4,645
3,855
9,240
8,920
8,640
8,355
6,945
850
900
950
1000
145
80
65
40
375
215
170
105
745
430
345
215
1,120
645
515
320
1,865
1,070
855
535
3,105
1,785
1,430
895
5,595
3,215
2,570
1,605
113
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, psig
Temperature,
°F
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-1.5
A 182 Gr. F1 (1)
A 204 Gr. A (1)
Ratings For Group 1.5 Materials
A 204 Gr. A (1)
A 691 Gr. CM-70 (1)
NOTE:
(1) Upon prolonged exposure to temperatures above 875°F, the carbide phase of carbon-molybdenum steel may be converted to graphite. Permissible, but not recommended for prolonged use above 875°F.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
265
260
230
200
170
695
695
685
660
640
1,395
1,395
1,375
1,325
1,285
2,090
2,090
1,960
1,985
1,925
3,480
3,380
3,435
3,310
3,210
5,805
5,805
5,725
5,520
5,350
10,445
10,445
10,305
9,935
9,625
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
9,070
8,825
8,515
7,970
7,610
850
900
950
1000
65
50
35
20
485
450
280
165
975
900
560
330
1,460
1,350
845
495
2,435
2,245
1,405
825
4,060
3,745
2,345
1,370
7,305
6,740
4,215
2,470
B – Special Class
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
265
265
265
265
265
695
695
695
695
695
1,395
1,395
1,395
1,395
1,395
2,090
2,090
2,090
2,090
2,090
3,480
3,480
3,480
3,480
3,480
5,805
5,805
5,805
5,805
5,805
10,445
10,445
10,445
10,445
10,445
600
650
700
750
800
265
265
265
265
265
695
695
695
695
695
1,395
1,395
1,395
1,395
1,395
2,090
2,090
2,090
2,090
2,090
3,480
3,480
3,480
3,480
3,480
5,805
5,805
5,805
5,805
5,805
10,445
10,445
10,445
10,445
10,445
850
900
950
1000
260
225
135
80
680
585
350
205
1,355
1,175
705
410
2,030
1,760
1,055
615
3,385
2,935
1,755
1,030
5,645
4,895
2,930
1,715
10,160
8,805
5,270
3,085
114
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, psig
Temperature,
°F
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-1.6
A 387 Gr. 2 Cl. 1
Ratings For Group 1.6 Materials
A 691 Gr. 1⁄2Cr
A 387 Gr. 2 Cl. 2
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
225
225
225
200
170
590
590
590
590
575
1,180
1,185
1,185
1,145
1,105
1,770
1,775
1,775
1,715
1,655
2,945
2,955
2,955
2,860
2,755
4,910
4,930
4,930
4,765
4,595
8,840
8,870
8,870
8,580
8,270
600
650
700
750
800
140
125
110
95
80
555
545
535
525
510
1,065
1,045
1,025
630
630
1,600
1,570
1,535
1,420
1,420
2,665
2,615
2,560
2,365
2,365
4,440
4,355
4,270
3,945
3,945
7,990
7,840
7,685
7,095
7,095
850
900
950
1000
65
50
35
20
485
450
315
200
615
590
420
270
1,380
1,325
630
405
2,295
2,210
1,575
1,010
3,830
3,685
2,630
1,685
6,890
6,635
4,730
3,035
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
225
225
225
225
225
590
590
590
590
590
1,180
1,180
1,180
1,180
1,180
1,770
1,770
1,770
1,770
1,770
2,945
2,945
2,945
2,945
2,945
4,910
4,910
4,910
4,910
4,910
8,840
8,840
8,840
8,840
8,840
600
650
700
750
800
225
225
225
225
225
590
590
590
590
590
1,180
1,180
1,180
1,180
1,180
1,770
1,770
1,770
1,770
1,770
2,945
2,945
2,945
2,945
2,945
4,910
4,910
4,910
4,910
4,910
8,840
8,840
8,840
8,840
8,840
850
900
950
1000
225
230
150
95
590
600
395
255
1,180
1,200
790
505
1,770
1,800
1,185
760
2,945
3,000
1,970
1,265
4,910
5,000
3,285
2,105
8,840
9,000
5,915
3,795
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
115
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
A 691 Gr. CM 75
Ratings For Group 1.7 Materials
A 182 Gr. F2 (1)
A 217 Gr. WC4 (1)(2)
A 217 Gr. WC5 (2)
NOTES:
(1) Not to be used over 1000°F.
(2) Use normalized and tempered material only.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
750
730
705
665
1,500
1,500
1,455
1,410
1,330
2,250
2,250
2,185
2,115
1,995
3,750
3,750
3,640
3,530
3,325
6,250
6,250
6,070
5,880
5,540
11,250
11,250
10,925
10,585
9,965
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
9,070
8,825
8,515
7,970
7,610
850
900
950
1000
1050
65
50
35
20
20
485
450
315
200
160
975
900
630
405
315
1,460
1,350
945
605
475
2,435
2,245
1,575
1,010
790
4,060
3,745
2,630
1,685
1,315
7,305
6,740
4,730
3,035
2,365
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
290
290
290
750
750
750
750
750
1,500
1,500
1,500
1,500
1,500
2,250
2,250
2,250
2,250
2,250
3,750
3,750
3,750
3,750
3,750
6,250
6,250
6,250
6,250
6,250
11,250
11,250
11,250
11,250
11,250
600
650
700
750
800
290
290
280
280
275
750
750
735
730
720
1,500
1,500
1,465
1,460
1,440
2,250
2,250
2,200
2,185
2,160
3,750
3,750
3,665
3,645
3,600
6,250
6,250
6,110
6,070
6,000
11,250
11,250
10,995
10,930
10,800
850
900
950
1000
1050
260
230
150
95
75
680
600
395
255
195
1,355
1,200
790
505
395
2,030
1,800
1,185
760
590
3,385
3,000
1,970
1,265
985
5,645
5,000
3,285
2,105
1,645
10,160
9,000
5,915
3,795
2,955
116
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Table VII-2-1.7
MANDATORY APPENDIX VII
ASME B16.34-2004
Ratings For Group 1.8 Materials
Table VII-2-1.8
A 335 Gr. P22 (1)
A 369 Gr. FP22 (1)
A 387 Gr. 11 Cl. 1 (1)
A 691 Gr. 11⁄4 Cr (1)
A 691 Gr. 21⁄4 Cr (1)
A 387 Gr. 12 Cl. 2 (1)
A 387 Gr. 12 Cl. 1 (1)
NOTE:
(1) Permissible, but not recommended for prolonged use above 1100°F.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
235
220
215
200
170
615
575
560
555
555
1,235
1,150
1,120
1,105
1,105
1,850
1,730
1,680
1,660
1,660
3,085
2,880
2,800
2,765
2,765
5,145
4,800
4,665
4,610
4,610
9,255
8,640
8,395
8,300
8,300
600
650
700
750
800
140
125
110
95
80
555
555
545
530
510
1,105
1,105
1,085
1,065
1,015
1,660
1,660
1,630
1,595
1,525
2,765
2,765
2,715
2,660
2,540
4,610
4,610
4,525
4,430
4,230
8,300
8,300
8,145
7,970
7,610
850
900
950
1000
1050
65
50
35
20
20
485
450
320
215
145
975
900
640
430
290
1,460
1,350
955
650
430
2,435
2,245
1,595
1,080
720
4,060
3,745
2,655
1,800
1,200
7,305
6,740
4,785
3,240
2,160
1100
1150
1200
20
20
15
95
60
40
190
125
75
290
185
115
480
310
190
800
515
315
1,440
925
565
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
B – Special Class
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
245
245
240
240
240
645
640
625
625
625
1,285
1,285
1,245
1,245
1,245
1,930
1,925
1,870
1,870
1,870
3,215
3,210
3,120
3,120
3,120
5,355
5,350
5,195
5,195
5,195
9,645
9,625
9,355
9,355
9,355
600
650
700
750
800
240
240
240
265
265
625
625
625
695
675
1,245
1,245
1,245
1,390
1,350
1,870
1,870
1,870
2,080
2,025
3,120
3,120
3,120
3,470
3,375
5,195
5,195
5,195
5,780
5,625
9,355
9,355
9,355
10,405
10,125
850
900
950
1000
1050
250
225
155
105
70
655
585
400
270
180
1,315
1,165
795
540
360
1,970
1,750
1,195
810
540
3,280
2,915
1,995
1,350
900
5,470
4,855
3,320
2,250
1,500
9,845
8,745
5,980
4,050
2,700
1100
1150
1200
45
30
20
120
75
45
240
155
95
360
230
140
600
385
235
1,000
645
395
1,800
1,155
705
117
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, psig
Temperature,
°F
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-1.9
A 182 Gr. F11 Cl. 2 (1)(2)
Ratings For Group 1.9 Materials
A 217 Gr. WC6 (1)(3)
A 387 Gr. 11, Cl. 2 (2)
A 739 Gr. B11 (2)
NOTES:
(1) Use normalized and tempered material only.
(2) Permissible, but not recommended for prolonged use above 1100°F.
(3) Not to be used over 1100°F.
A – Standard Class
Temperature,
°F
Working Pressures by Class, psig
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
750
720
695
665
1,500
1,500
1,445
1,385
1,330
2,250
2,250
2,165
2,080
1,995
3,750
3,750
3,610
3,465
3,325
6,250
6,250
6,015
5,775
5,540
11,250
11,250
10,830
10,400
9,965
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
9,070
8,825
8,515
7,970
7,610
850
900
950
1000
1050
65
50
35
20
20
485
450
320
215
145
975
900
640
430
290
1,460
1,350
955
650
430
2,435
2,245
1,595
1,080
720
4,060
3,745
2,655
1,800
1,200
7,305
6,740
4,785
3,240
2,160
1100
1150
1200
20
20
15
95
65
40
190
130
80
290
195
125
480
325
205
800
545
345
1,440
975
615
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
150
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
290
290
290
750
750
750
750
750
1,500
1,500
1,500
1,500
1,500
2,250
2,250
2,250
2,250
2,250
3,750
3,750
3,750
3,750
3,750
6,250
6,250
6,250
6,250
6,250
11,250
11,250
11,250
11,250
11,250
600
650
700
750
800
290
290
280
280
275
750
750
735
730
720
1,500
1,500
1,465
1,460
1,440
2,250
2,250
2,200
2,185
2,160
3,750
3,750
3,665
3,645
3,600
6,250
6,250
6,110
6,070
6,000
11,250
11,250
10,995
10,930
10,800
850
900
950
1000
1050
260
225
155
105
70
680
585
400
270
180
1,355
1,175
795
540
360
2,030
1,760
1,195
810
540
3,385
2,935
1,995
1,350
900
5,645
4,895
3,320
2,250
1,500
10,160
8,805
5,980
4,050
2,700
1100
1150
1200
45
30
20
120
80
50
240
165
105
360
245
155
600
405
255
1,000
680
430
1,800
1,220
770
118
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-1.10
A 182 Gr. F22 Cl. 3 (1)
Ratings For Group 1.10 Materials
A 217 Gr. WC9 (2)(3)
A 387 Gr. 22 Cl. 2 (1)
A 739 Gr. B22 (1)
NOTES:
(1) Permissible, but not recommended for prolonged use above 1100°F.
(2) Use normalized and tempered material only.
(3) Not to be used over 1100°F.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
750
730
705
665
1,500
1,500
1,455
1,410
1,330
2,250
2,250
2,185
2,115
1,995
3,750
3,750
3,640
3,530
3,325
6,250
6,250
6,070
5,880
5,540
11,250
11,250
10,925
10,585
9,965
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
9,070
8,825
8,515
7,970
7,610
850
900
950
1000
1050
65
50
35
20
20
485
450
385
265
175
975
900
755
535
350
1,460
1,350
1,160
800
525
2,435
2,245
1,930
1,335
875
4,060
3,745
3,220
2,230
1,455
7,305
6,740
5,795
4,010
2,625
1100
1150
1200
20
20
15
110
70
40
220
135
80
330
205
125
550
345
205
915
570
345
1,645
1,030
615
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
285
280
280
750
750
740
730
725
1,500
1,500
1,480
1,455
1,450
2,250
2,250
2,220
2,185
2,175
3,750
3,750
3,695
3,640
3,620
6,250
6,250
6,160
6,065
6,035
11,250
11,250
11,090
10,915
10,865
600
650
700
750
800
275
275
270
270
270
720
715
705
705
705
1,440
1,430
1,415
1,415
1,415
2,165
2,145
2,120
2,120
2,120
3,605
3,580
3,535
3,535
3,535
6,010
5,965
5,895
5,895
5,895
10,815
10,735
10,605
10,605
10,605
850
900
950
1000
1050
260
230
180
130
85
680
600
470
335
220
1,355
1,200
945
670
435
2,030
1,800
1,415
1,005
655
3,385
3,000
2,360
1,670
1,095
5,645
5,000
3,930
2,785
1,820
10,160
9,000
7,070
5,015
3,280
1100
1150
1200
55
35
20
135
85
50
275
170
105
410
255
155
685
430
255
1,145
715
430
2,055
1,285
770
119
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table 2-1.11
A 182 Gr. F21 (1)
A 204 Gr. C (4)
Ratings for Group 1.11 Materials
A 302 Gr. B (2)
A 302 Gr. C (2)
A 302 Gr. D (2)
A 387 Gr. 21 Cl. 2 (1)
A 537 Cl. 2 (3)
A 302 Gr. A (2)
NOTES:
(1) Permissible, but not recommended for prolonged use above 1100°F.
(2) Upon prolonged exposure to temperatures above 875°F, the carbide phase of carbon-molybdenum steel may be converted to graphite. Permissible, but not recommended for prolonged use above 1000°F.
(3) Not to be used over 700°F.
(4) Upon prolonged exposure to temperatures above 875°F, the carbide phase of steel may be converted to graphite. Permissible, but not recommended for prolonged use above 875°F.
A – Standard Class
Working Pressures by Class, psig
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
750
730
705
665
1,500
1,500
1,455
1,410
1,330
2,250
2,250
2,185
2,115
1,995
3,750
3,750
3,640
3,530
3,325
6,250
6,250
6,070
5,880
5,540
11,250
11,250
10,925
10,585
9,965
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
9,070
8,825
8,515
7,970
7,610
850
900
950
1000
1050
65
50
35
20
20
485
450
280
165
165
975
900
560
330
330
1,460
1,345
845
495
495
2,435
2,245
1,405
825
825
4,060
3,745
2,345
1,370
1,370
7,305
6,735
4,215
2,470
2,470
1100
1150
1200
20
20
15
110
80
45
220
165
90
330
245
135
550
410
225
915
685
370
1,645
1,235
670
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°F
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
290
290
290
750
750
750
750
750
1,500
1,500
1,500
1,500
1,500
2,250
2,250
2,250
2,250
2,250
3,750
3,750
3,750
3,750
3,750
6,250
6,250
6,250
6,250
6,250
11,250
11,250
11,250
11,250
11,250
600
650
700
750
800
290
290
280
280
275
750
750
735
730
720
1,500
1,500
1,465
1,460
1,440
2,250
2,250
2,200
2,185
2,160
3,750
3,750
3,665
3,645
3,600
6,250
6,250
6,110
6,070
6,000
11,250
11,250
10,995
10,930
10,800
850
900
950
1000
1050
260
215
135
80
80
680
560
350
205
210
1,355
1,125
705
410
420
2,030
1,685
1,055
615
630
3,385
2,805
1,755
1,030
1,050
5,645
4,680
2,930
1,715
1,750
10,160
8,420
5,270
3,085
3,150
1100
1150
1200
55
40
20
135
105
55
275
205
110
410
310
165
685
515
280
1,145
855
465
2,055
1,545
835
120
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-1.12
A 335 Gr. P5
A 335 Gr. P5b
Ratings For Group 1.12 Materials
A 369 Gr. FP5
A 387 Gr. Cl. 1
A 387 Gr. 5 Cl. 2
A 691 Gr. 5Cr
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
235
215
205
200
170
615
555
535
530
525
1,235
1,115
1,075
1,060
1,055
1,850
1,670
1,610
1,590
1,580
3,085
2,785
2,685
2,655
2,635
5,145
4,645
4,475
4,425
4,390
9,255
8,360
8,055
7,960
7,900
600
650
700
750
800
140
125
110
95
80
520
510
505
490
475
1,035
1,025
1,010
985
950
1,555
1,535
1,510
1,475
1,425
2,590
2,560
2,520
2,460
2,375
4,320
4,270
4,200
4,095
3,960
7,775
7,685
7,560
7,375
7,130
850
900
950
1000
1050
65
50
35
20
20
455
375
275
200
145
915
745
550
400
290
1,370
1,120
825
595
430
2,285
1,870
1,370
995
720
3,805
3,115
2,285
1,655
1,200
6,850
5,605
4,115
2,985
2,160
1100
1150
1200
20
20
15
100
60
35
200
125
70
300
185
105
495
310
170
830
515
285
1,490
925
515
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
245
245
240
235
235
645
640
625
620
615
1,285
1,285
1,245
1,235
1,230
1,930
1,925
1,870
1,855
1,850
3,215
3,210
3,115
3,090
3,080
5,355
5,350
5,190
5,150
5,135
9,645
9,625
9,340
9,275
9,240
600
650
700
750
800
235
230
225
225
225
610
600
585
585
585
1,215
1,195
1,170
1,170
1,170
1,825
1,795
1,755
1,755
1,755
3,040
2,990
2,925
2,925
2,925
5,065
4,980
4,875
4,875
4,875
9,115
8,970
8,775
8,775
8,775
850
900
950
1000
1050
225
180
130
95
70
585
465
345
250
180
1,170
935
685
495
360
1,755
1,400
1,030
745
540
2,925
2,335
1,715
1,245
900
4,875
3,895
2,855
2,070
1,500
8,775
7,005
5,145
3,730
2,700
1100
1150
1200
50
30
15
125
75
45
250
155
85
375
230
130
620
385
215
1,035
645
355
1,865
1,155
645
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
121
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-1.13
Ratings For Group 1.13 Materials
A 182 Gr. F5a
A 217 Gr. C5 (1)
NOTE:
(1) Use normalized and tempered material only.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
750
730
705
665
1,500
1,500
1,455
1,410
1,330
2,250
2,250
2,185
2,115
1,995
3,750
3,750
3,640
3,530
3,325
6,250
6,250
6,070
5,880
5,540
11,250
11,250
10,925
10,585
9,965
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
9,070
8,825
8,515
7,970
7,610
850
900
950
1000
1050
65
50
35
20
20
485
375
275
200
145
975
745
550
400
290
1,460
1,120
825
595
430
2,435
1,870
1,370
995
720
4,060
3,115
2,285
1,655
1,200
7,305
5,605
4,115
2,985
2,160
1100
1150
1200
20
20
15
100
60
35
200
125
70
300
185
105
495
310
170
830
515
285
1,490
925
515
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
B – Special Class
Working Pressures by Class, psig
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
290
290
290
750
750
750
750
750
1,500
1,500
1,500
1,500
1,500
2,250
2,250
2,250
2,250
2,250
3,750
3,750
3,750
3,750
3,750
6,250
6,250
6,250
6,250
6,250
11,250
11,250
11,250
11,250
11,250
600
650
700
750
800
290
290
280
280
275
750
750
735
730
720
1,500
1,500
1,465
1,460
1,440
2,250
2,250
2,200
2,185
2,160
3,750
3,750
3,665
3,645
3,600
6,250
6,250
6,110
6,070
6,000
11,250
11,250
10,995
10,930
10,800
850
900
950
1000
1050
260
230
170
125
90
615
465
345
250
180
1,225
935
685
495
360
1,840
1,400
1,030
745
540
3,065
2,335
1,715
1,245
900
5,105
3,895
2,855
2,070
1,500
9,195
7,005
5,145
3,730
2,700
1100
1150
1200
60
40
20
125
75
45
250
155
85
375
230
130
620
385
215
1,035
645
355
1,865
1,155
645
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°F
122
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-1.14
A 182 Gr. F9
Ratings For Group 1.14 Materials
A 217 Gr. C12 (1)
NOTE:
(1) Use normalized and tempered material only.
A – Standard Class
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
750
730
705
665
1,500
1,500
1,455
1,410
1,330
2,250
2,250
2,185
2,115
1,995
3,750
3,750
3,640
3,530
3,325
6,250
6,250
6,070
5,880
5,540
11,250
11,250
10,925
10,585
9,965
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
9,070
8,825
8,515
7,970
7,610
850
900
950
1000
1050
65
50
35
20
20
485
450
375
255
170
975
900
755
505
345
1,460
1,350
1,130
760
515
2,435
2,245
1,885
1,270
855
4,060
3,745
3,145
2,115
1,430
7,305
6,740
5,655
3,805
2,570
1100
1150
1200
20
20
20
115
75
50
225
150
105
340
225
155
565
375
255
945
630
430
1,695
1,130
770
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
290
290
290
750
750
750
750
750
1,500
1,500
1,500
1,500
1,500
2,250
2,250
2,250
2,250
2,250
3,750
3,750
3,750
3,750
3,750
6,250
6,250
6,250
6,250
6,250
11,250
11,250
11,250
11,250
11,250
600
650
700
750
800
290
290
280
280
275
750
750
735
730
720
1,500
1,500
1,465
1,460
1,440
2,250
2,250
2,200
2,185
2,160
3,750
3,750
3,665
3,645
3,600
6,250
6,250
6,110
6,070
6,000
11,250
11,250
10,995
10,930
10,800
850
900
950
1000
1050
260
230
180
120
80
680
600
470
315
215
1,355
1,200
945
635
430
2,030
1,800
1,415
950
645
3,385
3,000
2,355
1,585
1,070
5,645
5,000
3,930
2,645
1,785
10,160
9,000
7,070
4,755
3,215
1100
1150
1200
55
35
25
140
95
65
285
190
130
425
285
195
705
470
320
1,180
785
535
2,120
1,415
965
123
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, psig
Temperature,
°F
ASME B16.34-2004
MANDATORY APPENDIX VII
Ratings For Group 1.15 Materials
Table VII-2-1.15
A 182 Gr. F91
A 217 Gr. C12A
A 387 Gr. 91 Cl.2
A 335 Gr. P91
A – Standard Class
Working Pressures by Class, psig
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
750
730
705
665
1,500
1,500
1,455
1,410
1,330
2,250
2,250
2,185
2,115
1,995
3,750
3,750
3,640
3,530
3,325
6,250
6,250
6,070
5,880
5,540
11,250
11,250
10,925
10,585
9,965
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
9,070
8,825
8,515
7,970
7,610
850
900
950
1000
1050
65
50
35
20
20
485
450
385
365
360
975
900
775
725
720
1,460
1,350
1,160
1,090
1,080
2,435
2,245
1,930
1,820
1,800
4,060
3,745
3,220
3,030
3,000
7,305
6,740
5,795
5,450
5,400
1100
1150
1200
20
20
20
300
225
145
605
445
290
905
670
430
1,510
1,115
720
2,515
1,855
1,200
4,525
3,345
2,160
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°F
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
290
290
290
750
750
750
750
750
1,500
1,500
1,500
1,500
1,500
2,250
2,250
2,250
2,250
2,250
3,750
3,750
3,750
3,750
3,750
6,250
6,250
6,250
6,250
6,250
11,250
11,250
11,250
11,250
11,250
600
650
700
750
800
290
290
280
280
275
750
750
735
730
720
1,500
1,500
1,465
1,460
1,440
2,250
2,250
2,200
2,185
2,160
3,750
3,750
3,665
3,645
3,600
6,250
6,250
6,110
6,070
6,000
11,250
11,250
10,995
10,930
10,800
850
900
950
1000
1050
260
230
180
160
160
680
600
470
420
420
1,355
1,200
945
840
840
2,030
1,800
1,415
1,260
1,260
3,385
3,000
2,360
2,105
2,105
5,645
5,000
3,930
3,505
3,505
10,160
9,000
7,070
6,310
6,310
1100
1150
1200
145
105
70
375
280
180
755
555
360
1,130
835
540
1,885
1,395
900
3,145
2,320
1,500
5,655
4,180
2,700
124
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Ratings For Group 1.16 Materials
A 335 Gr. P1 (1)(3)
A 335 Gr. P11 (2)
A 335 Gr. P12 (2)
A 369 Gr. FP1 (1)(3)
A 369 Gr. FP11 (2)
A 369 Gr. FP12 (2)
A 387 Gr. 12 Cl. 1 (2)
A 691 Gr. 1Cr (2)(4)
NOTE:
(1) Upon prolonged exposure to temperatures above 875°F, the carbide phase of steel may be converted to graphite. Permissible but not recommended for prolonged usage above 875°F.
(2) Permissible but not recommended for prolonged usage above 1100°F.
(3) Not to be used over 1000°F.
(4) Use normalized and tempered material only.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
225
220
205
200
170
590
570
540
520
500
1,180
1,140
1,080
1,040
1,005
1,770
1,710
1,625
1,560
1,505
2,945
2,850
2,705
2,600
2,510
4,910
4,750
4,510
4,335
4,185
8,840
8,545
8,115
7,805
7,530
600
650
700
750
800
140
125
110
95
80
485
475
465
455
445
965
950
930
915
890
1,450
1,425
1,395
1,370
1,335
2,415
2,375
2,325
2,285
2,220
4,030
3,960
3,875
3,805
3,705
7,250
7,130
6,975
6,850
6,665
850
900
950
1000
1050
65
50
35
20
20
430
420
280
165
145
865
840
560
330
290
1,295
1,260
845
495
430
2,160
2,100
1,405
825
720
3,600
3,495
2,345
1,370
1,200
6,480
6,295
4,215
2,470
2,160
1100
1150
1200
20
20
15
95
60
40
190
125
75
290
185
115
480
310
190
800
515
315
1,440
925
565
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
225
220
215
215
215
590
580
565
565
565
1,180
1,155
1,135
1,135
1,135
1,770
1,735
1,700
1,700
1,700
2,945
2,895
2,835
2,835
2,835
4,910
4,820
4,725
4,725
4,725
8,840
8,680
8,500
8,500
8,500
600
650
700
750
800
215
215
215
215
215
565
565
565
565
565
1,135
1,135
1,135
1,135
1,135
1,700
1,700
1,700
1,700
1,700
2,835
2,835
2,835
2,835
2,835
4,725
4,725
4,725
4,725
4,725
8,500
8,500
8,500
8,500
8,500
850
900
950
1000
1050
215
215
135
80
75
565
560
350
205
195
1,135
1,120
705
410
385
1,700
1,680
1,055
615
580
2,835
2,800
1,755
1,030
965
4,725
4,665
2,930
1,715
1,605
8,500
8,395
5,270
3,085
2,895
1100
1150
1200
45
30
20
120
75
45
240
155
95
360
230
140
600
385
235
1,000
645
395
1,800
1,155
705
125
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Table VII-2-1.16
ASME B16.34-2004
MANDATORY APPENDIX VII
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Table VII-2-1.17
A 182 Gr. F12 Cl. 2 (1)(2)
Ratings For Group 1.17 Materials
A 182 Gr. F5
NOTES:
(1) Use normalized and tempered material only.
(2) Permissible but not recommended for prolonged usage above 1100°F.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
735
700
670
645
1,500
1,470
1,400
1,335
1,290
2,250
2,210
2,100
2,005
1,940
3,750
3,680
3,495
3,345
3,230
6,250
6,135
5,830
5,570
5,385
11,250
11,040
10,490
10,030
9,690
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
9,070
8,825
8,515
7,970
7,610
850
900
950
1000
1050
65
50
35
20
20
485
375
275
200
145
975
745
550
400
290
1,460
1,120
825
595
430
2,435
1,870
1,370
995
720
4,060
3,115
2,285
1,655
1,200
7,305
5,605
4,115
2,985
2,160
1100
1150
1200
20
20
15
95
60
35
190
125
70
290
185
105
480
310
170
800
515
285
1,440
925
515
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
280
275
275
275
750
735
720
720
720
1,500
1,470
1,440
1,440
1,440
2,250
2,210
2,165
2,165
2,155
3,750
3,680
3,605
3,605
3,595
6,250
6,135
6,010
6,010
5,990
11,250
11,040
10,815
10,815
10,785
600
650
700
750
800
270
265
260
260
260
710
695
685
685
685
1,415
1,395
1,365
1,365
1,365
2,125
2,090
2,050
2,050
2,050
3,540
3,485
3,415
3,415
3,415
5,900
5,810
5,690
5,690
5,690
10,625
10,460
10,240
10,240
10,240
850
900
950
1000
1050
235
180
130
95
70
615
465
345
250
180
1,225
935
685
495
360
1,840
1,400
1,030
745
540
3,065
2,335
1,715
1,245
900
5,105
3,895
2,855
2,070
1,500
9,195
7,005
5,145
3,730
2,700
1100
1150
1200
45
30
15
120
75
45
240
155
85
360
230
130
600
385
215
1,000
645
355
1,800
1,155
645
126
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Table VII-2-2.1
A
A
A
A
182
182
240
240
Gr.
Gr.
Gr.
Gr.
F304 (1)
F304H
304 (1)
304H
A
A
A
A
312
312
351
351
Gr.
Gr.
Gr.
Gr.
Ratings For Group 2.1 Materials
TP304 (1)
TP304H
CF3 (2)
CF8 (1)
A
A
A
A
358
376
376
430
Gr.
Gr.
Gr.
Gr.
304 (1)
TP304 (1)
TP304H
FP304 (1)
A 430 Gr. FP304H
A 479 Gr. 304 (1)
A 479 Gr. 304H
NOTES:
(1) At temperatures over 1000°F, use only when the carbon content is 0.04% or higher.
(2) Not to be used over 800°F.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
275
230
205
190
170
720
600
540
495
465
1,440
1,200
1,075
995
930
2,160
1,800
1,615
1,490
1,395
3,600
3,000
2,690
2,485
2,330
6,000
5,000
4,480
4,140
3,880
10,800
9,000
8,065
7,450
6,985
600
650
700
750
800
140
125
110
95
80
440
430
420
415
405
885
865
845
825
810
1,325
1,295
1,265
1,240
1,215
2,210
2,160
2,110
2,065
2,030
3,680
3,600
3,520
3,440
3,380
6,625
6,480
6,335
6,190
6,085
850
900
950
1000
1050
65
50
35
20
20
395
390
380
355
325
790
780
765
710
650
1,190
1,165
1,145
1,065
975
1,980
1,945
1,910
1,770
1,630
3,300
3,240
3,180
2,950
2,715
5,940
5,830
5,725
5,315
4,885
1100
1150
1200
1250
1300
20
20
20
20
20
255
205
165
135
115
515
410
330
265
225
770
615
495
400
340
1,285
1,030
825
670
565
2,145
1,715
1,370
1,115
945
3,855
3,085
2,470
2,005
1,695
1350
1400
1450
1500
20
20
20
15
95
75
60
40
185
150
115
85
280
225
175
125
465
380
290
205
770
630
485
345
1,390
1,130
875
620
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
127
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-2.1
A
A
A
A
182
182
240
240
Gr.
Gr.
Gr.
Gr.
F304 (1)
F304H
304 (1)
304H
A
A
A
A
312
312
351
351
Gr.
Gr.
Gr.
Gr.
Ratings For Group 2.1 Materials (Cont’d)
TP304 (1)
TP304H
CF3 (2)
CF8 (1)
A
A
A
A
358
376
376
430
Gr.
Gr.
Gr.
Gr.
304 (1)
TP304 (1)
TP304H
FP304 (1)
A 430 Gr. FP304H
A 479 Gr. 304 (1)
A 479 Gr. 304H
NOTES:
(1) At temperatures over 1000°F, use only when the carbon content is 0.04% or higher.
(2) Not to be used over 800°F.
B – Special Class
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
255
230
215
200
750
670
600
555
520
1,500
1,340
1,200
1,110
1,040
2,250
2,010
1,800
1,665
1,560
3,750
3,350
3,000
2,770
2,600
6,250
5,580
5,000
4,620
4,330
11,250
10,045
9,000
8,315
7,795
600
650
700
750
800
190
185
180
175
175
495
480
470
460
455
985
965
945
920
905
1,480
1,445
1,415
1,380
1,360
2,465
2,410
2,355
2,305
2,265
4,105
4,020
3,930
3,840
3,770
7,395
7,230
7,070
6,910
6,790
850
900
950
1000
1050
170
165
165
160
155
440
435
425
415
405
885
870
850
830
815
1,325
1,300
1,280
1,245
1,220
2,210
2,170
2,130
2,075
2,035
3,685
3,615
3,550
3,460
3,395
6,630
6,510
6,390
6,230
6,105
1100
1150
1200
1250
1300
125
100
80
65
55
320
255
205
165
140
645
515
410
335
285
965
770
615
500
425
1,605
1,285
1,030
835
705
2,680
2,145
1,715
1,395
1,180
4,820
3,855
3,085
2,505
2,120
1350
1400
1450
1500
45
35
30
20
115
95
75
50
230
190
145
105
345
285
220
155
580
470
365
260
965
785
610
430
1,735
1,415
1,095
770
128
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-2.2
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
A
A
A
A
A
A
182
182
182
182
240
240
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
F316 (1)
F316H
F317 (1)
F317H
316 (1)
316H
A
A
A
A
A
A
240
240
312
312
312
312
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Ratings For Group 2.2 Materials
317 (1)
317H
TP316 (1)
TP316H
TP317 (1)
TP317H
A
A
A
A
A
A
351
351
351
351
351
358
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
CF3A (2)
CF8M (1)
CF8A (2)
CF3M (1)
CG8MF (4)
316 (1)
A
A
A
A
A
A
376
376
430
430
479
479
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
TP316 (1)
TP316H
FP316 (1)
FP316H
316 (1)
316H
NOTES:
(1) At temperatures over 1000°F, use only when the carbon content is 0.04% or higher.
(2) Not to be used over 650°F.
(3) Not to be used over 850°F.
(4) Not to be used over 1000°F.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
275
235
215
195
170
720
620
560
515
480
1,440
1,240
1,120
1,025
955
2,160
1,860
1,680
1,540
1,435
3,600
3,095
2,795
2,570
2,390
6,000
5,160
4,660
4,280
3,980
10,800
9,290
8,390
7,705
7,165
600
650
700
750
800
140
125
110
95
80
450
440
435
425
420
900
885
870
855
845
1,355
1,325
1,305
1,280
1,265
2,255
2,210
2,170
2,135
2,110
3,760
3,680
3,620
3,560
3,520
6,770
6,625
6,515
6,410
6,335
850
900
950
1000
1050
65
50
35
20
20
420
415
385
365
160
835
830
775
725
720
1,255
1,245
1,160
1,090
1,080
2,090
2,075
1,930
1,820
1,800
3,480
3,460
3,220
3,030
3,000
6,265
6,230
5,795
5,450
5,400
1100
1150
1200
1250
1300
20
20
20
20
20
305
235
185
145
115
610
475
370
295
235
915
710
555
440
350
1,525
1,185
925
735
585
2,545
1,970
1,545
1,230
970
4,575
3,550
2,775
2,210
1,750
1350
1400
1450
1500
20
20
20
15
95
75
60
40
190
150
115
85
290
225
175
125
480
380
290
205
800
630
485
345
1,440
1,130
875
620
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
129
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-2.2
A
A
A
A
A
A
182
182
182
182
240
240
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
F316 (1)
F316H
F317 (1)
F317H
316 (1)
316H
A
A
A
A
A
A
240
240
312
312
312
312
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Ratings For Group 2.2 Materials (Cont’d)
317 (1)
317H
TP316 (1)
TP316H
TP317 (1)
TP317H
A
A
A
A
A
A
351
351
351
351
351
358
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
CF3A (2)
CF8M (1)
CF8A (2)
CF3M (1)
CG8MF (4)
316 (1)
A
A
A
A
A
A
376
376
430
430
479
479
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
TP316 (1)
TP316H
FP316 (1)
FP316H
316 (1)
316H
NOTES:
(1) At temperatures over 1000°F, use only when the carbon content is 0.04% or higher.
(2) Not to be used over 650°F.
(3) Not to be used over 850°F.
(4) Not to be used over 1000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
265
240
220
205
750
690
625
575
535
1,500
1,380
1,250
1,145
1,065
2,250
2,075
1,870
1,720
1,600
3,750
3,455
3,120
2,865
2,665
6,250
5,760
5,200
4,775
4,440
11,250
10,365
9,360
8,600
7,995
600
650
700
750
800
195
190
185
185
180
505
495
485
475
470
1,005
985
970
955
945
1,510
1,480
1,455
1,430
1,415
2,520
2,465
2,425
2,385
2,355
4,195
4,105
4,040
3,975
3,930
7,555
7,395
7,270
7,150
7,070
850
900
950
1000
1050
180
180
175
160
160
465
465
460
420
420
930
925
915
840
840
1,400
1,390
1,375
1,260
1,260
2,330
2,315
2,290
2,105
2,105
3,885
3,860
3,815
3,505
3,505
6,990
6,950
6,870
6,310
6,310
1100
1150
1200
1250
1300
145
115
90
70
55
380
295
230
185
145
765
590
465
370
290
1,145
885
695
555
435
1,905
1,480
1,155
920
730
3,180
2,465
1,930
1,535
1,215
5,720
4,435
3,470
2,765
2,185
1350
1400
1450
1500
45
35
30
20
120
95
75
50
240
190
145
105
360
285
220
155
600
470
365
260
1,000
785
605
430
1,800
1,415
1,095
770
130
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-2.3
A 182 Gr. F304L (1)
A 182 Gr. F316L
Ratings For Group 2.3 Materials
A 240 Gr. 304L (1)
A 240 Gr. 316L
A 312 Gr. TP304L (1)
A 312 Gr. TP316L
A 479 Gr. 304L (1)
A 479 Gr. 316L
NOTE:
(1) Not to be used over 800°F.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
230
195
175
160
150
600
510
455
420
395
1,200
1,020
910
840
785
1,800
1,535
1,370
1,260
1,180
3,000
2,555
2,280
2,100
1,970
5,000
4,260
3,800
3,500
3,280
9,000
7,670
6,840
6,300
5,905
600
650
700
750
800
140
125
110
110
80
370
365
360
355
345
745
730
720
705
690
1,115
1,095
1,080
1,060
1,035
1,860
1,825
1,800
1,765
1,730
3,100
3,040
3,000
2,940
2,880
5,580
5,470
5,400
5,290
5,185
850
65
340
675
1,015
1,690
2,820
5,075
B – Special Class
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
255
220
195
180
170
670
570
510
470
440
1,340
1,140
1,020
940
880
2,010
1,710
1,525
1,405
1,320
3,350
2,855
2,545
2,345
2,195
5,580
4,755
4,240
3,905
3,660
10,045
8,560
7,635
7,030
6,590
600
650
700
750
800
160
155
155
150
150
415
405
400
395
385
830
815
805
790
770
1,245
1,220
1,205
1,180
1,155
2,075
2,035
2,010
1,970
1,930
3,460
3,395
3,350
3,280
3,215
6,230
6,105
6,025
5,905
5,785
850
145
380
755
1,135
1,890
3,145
5,665
131
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, psig
Temperature,
°F
ASME B16.34-2004
MANDATORY APPENDIX VII
A
A
A
A
182
182
240
240
Gr.
Gr.
Gr.
Gr.
F321 (1)
F321H (2)
321 (1)
321H (2)
Ratings for Group 2.4 Materials
A 312 Gr. TP321 (1)
A 312 Gr. TP321H
A 358 Gr. 321 (1)
A 376 Gr. TP321 (1)
A 376 Gr. TP321H
A 430 Gr. FP321 (1)
A 430 Gr. FP321H
A 479 Gr. 321 (1)
A 479 Gr. 321H
NOTES:
(1) Not to be used over 1000°F.
(2) At temperatures over 1000°F, use only if the material is heat treated by heating to a minimum temperature of 2000°F.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
100
200
300
400
500
275
250
230
200
170
720
650
595
550
515
1,440
1,295
1,190
1,105
1,030
2,160
1,945
1,785
1,655
1,550
3,600
3,240
2,975
2,760
2,580
6,000
5,400
4,960
4,600
4,300
10,800
9,720
8,930
8,280
7,740
600
650
700
750
800
140
125
110
95
80
485
475
465
460
450
975
950
930
915
900
1,460
1,425
1,395
1,375
1,355
2,435
2,375
2,330
2,290
2,255
4,060
3,960
3,880
3,820
3,760
7,310
7,130
6,985
6,875
6,770
850
900
950
1000
1050
65
50
35
20
20
445
440
385
365
360
895
885
775
725
720
1,340
1,325
1,160
1,090
1,080
2,230
2,210
1,930
1,820
1,800
3,720
3,680
3,220
3,030
3,000
6,695
6,625
5,795
5,450
5,400
1100
1150
1200
1250
1300
20
20
20
20
20
310
235
185
140
110
625
475
370
280
220
935
710
555
420
330
1,560
1,185
925
705
550
2,600
1,970
1,545
1,170
915
4,680
3,550
2,775
2,110
1,645
1350
1400
1450
1500
20
20
20
15
185
65
50
40
170
130
105
75
255
195
155
115
430
325
255
190
715
545
430
315
1,285
975
770
565
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
132
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Table VII-2-2.4
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-2.4
A
A
A
A
182
182
240
240
Gr.
Gr.
Gr.
Gr.
F321 (1)
F321H (2)
321 (1)
321H (2)
Ratings for Group 2.4 Materials (Cont’d)
A 312 Gr. TP321 (1)
A 312 Gr. TP321H
A 358 Gr. 321 (1)
A 376 Gr. TP321 (1)
A 376 Gr. TP321H
A 430 Gr. FP321 (1)
A 430 Gr. FP321H
A 479 Gr. 321 (1)
A 479 Gr. 321H
NOTES:
(1) Not to be used over 1000°F.
(2) At temperatures over 1000°F, use only if the material is heat treated by heating to a minimum temperature of 2000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
275
255
235
220
750
710
665
615
575
1,500
1,425
1,330
1,230
1,150
2,250
2,135
1,995
1,850
1,730
3,750
3,555
3,320
2,080
2,880
6,250
5,930
5,535
5,135
4,800
11,250
10,670
9,965
9,240
8,640
600
650
700
750
800
210
205
200
195
195
545
530
520
510
505
1,090
1,060
1,040
1,025
1,005
1,630
1,590
1,560
1,535
1,510
2,720
2,650
2,600
2,560
2,520
4,530
4,420
4,330
4,265
4,195
8,155
7,955
7,795
7,675
7,555
850
900
950
1000
1050
190
190
180
160
160
500
495
470
420
420
995
985
945
840
840
1,495
1,480
1,415
1,260
1,260
2,490
2,465
2,360
2,105
2,105
4,150
4,105
3,930
3,505
3,505
7,475
7,395
7,070
6,310
6,310
1100
1150
1200
1250
1300
150
115
90
65
55
390
295
230
175
135
780
590
465
350
275
1,170
885
695
525
410
1,950
1,480
1,155
880
685
3,250
2,465
1,930
1,465
1,145
5,850
4,435
3,470
2,635
2,055
1350
1400
1450
1500
40
30
25
20
105
80
65
45
215
165
130
95
320
245
195
140
535
405
320
235
895
680
535
395
1,605
1,220
965
705
133
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-2.5
A
A
A
A
A
A
182
182
182
182
240
240
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
F347 (1)
F347H (2)
F348 (1)
F348H (2)
347 (1)
347H (2)
A
A
A
A
A
A
240
240
312
312
312
312
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Ratings for Group 2.5 Materials
348 (1)
348H (2)
TP347 (1)
TP347H
TP348 (1)
TP348H
A
A
A
A
A
358
376
376
376
376
Gr.
Gr.
Gr.
Gr.
Gr.
A
A
A
A
A
A
347 (1)
TP347 (1)
TP347H
TP348 (1)
TP348H (1)
430
430
479
479
479
479
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
FP347 (1)
FP347H
347 (1)
347H
348 (1)
348H
NOTES:
(1) Not to be used over 1000°F.
(2) For temperatures over 1000°F, use only if the material is heat treated by heating to a minimum temperature of 2000°F.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
275
255
230
200
170
720
660
615
575
540
1,440
1,325
1,235
1,150
1,085
2,160
1,985
1,850
1,730
1,625
3,600
3,310
3,085
2,880
2,710
6,000
5,520
5,140
4,800
4,520
10,800
9,935
9,250
8,640
8,135
600
650
700
750
800
140
125
110
95
80
515
505
495
490
485
1,030
1,015
995
985
975
1,550
1,520
1,490
1,475
1,460
2,580
2,530
2,485
2,460
2,435
4,300
4,220
4,140
4,100
4,060
7,740
7,595
7,450
7,380
7,310
850
900
950
1000
1050
65
50
35
20
20
485
450
385
365
360
970
900
775
725
720
1,455
1,350
1,160
1,090
1,080
2,425
2,245
1,930
1,820
1,800
4,040
3,745
3,220
3,030
3,000
7,270
6,740
5,795
5,450
5,400
1100
1150
1200
1250
1300
20
20
20
20
20
325
275
205
180
140
645
550
410
365
275
965
825
620
545
410
1,610
1,370
1,030
910
685
2,685
2,285
1,715
1,515
1,145
4,835
4,115
3,085
2,725
2,060
1350
1400
1450
1500
20
20
20
15
105
75
60
40
205
150
115
85
310
225
175
125
515
380
290
205
860
630
485
345
1,545
1,130
875
620
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
134
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-2.5
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
A
A
A
A
A
A
182
182
182
182
240
240
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
F347 (1)
F347H (2)
F348 (1)
F348H (2)
347 (1)
347H (2)
A
A
A
A
A
A
240
240
312
312
312
312
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Ratings for Group 2.5 Materials (Cont’d)
348 (1)
348H (2)
TP347 (1)
TP347H
TP348 (1)
TP348H
A
A
A
A
A
358
376
376
376
376
Gr.
Gr.
Gr.
Gr.
Gr.
A
A
A
A
A
A
347 (1)
TP347 (1)
TP347H
TP348 (1)
TP348H (1)
430
430
479
479
479
479
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
FP347 (1)
FP347H
347 (1)
347H
348 (1)
348H
NOTES:
(1) Not to be used over 1000°F.
(2) For temperatures over 1000°F, use only if the material is heat treated by heating to a minimum temperature of 2000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
285
265
245
230
750
740
690
645
605
1,500
1,480
1,375
1,285
1,210
2,250
2,220
2,065
1,930
1,815
3,750
3,695
3,440
3,215
3,025
6,250
6,160
5,735
5,355
5,045
11,250
11,090
10,325
9,645
9,080
600
650
700
750
800
220
215
215
210
210
575
565
555
550
545
1,150
1,130
1,110
1,100
1,090
1,730
1,695
1,665
1,645
1,630
2,880
2,825
2,770
2,745
2,720
4,800
4,710
4,620
4,575
4,530
8,640
8,480
8,315
8,235
8,155
850
900
950
1000
1050
205
205
180
160
160
540
540
470
420
420
1,080
1,080
945
840
840
1,625
1,625
1,415
1,260
1,260
2,705
2,705
2,360
2,105
2,105
4,510
4,510
3,930
3,505
3,505
8,115
8,115
7,070
6,310
6,310
1100
1150
1200
1250
1300
155
130
100
90
65
405
345
260
230
170
805
685
515
455
345
1,210
1,030
770
680
515
2,015
1,715
1,285
1,135
860
3,360
2,860
2,145
1,895
1,430
6,045
5,145
3,860
3,410
2,570
1350
1400
1450
1500
50
35
30
20
130
95
75
50
260
190
145
105
385
285
220
155
645
470
365
260
1,070
785
610
430
1,930
1,415
1,095
770
135
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Ratings for Group 2.6 Materials
Table VII-2-2.6
A 312 Gr. TP309H
A 240 Gr. 309H
A 358 Gr. 309H
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
275
240
225
200
170
720
630
580
545
520
1,440
1,260
1,160
1,090
1,035
2,160
1,895
1,740
1,635
1,555
3,600
3,155
2,905
2,725
2,590
6,000
5,260
4,840
4,540
4,320
10,080
9,470
8,710
8,170
7,775
600
650
700
750
800
140
125
110
95
80
500
490
485
480
475
1,000
985
970
960
945
1,500
1,475
1,455
1,440
1,420
2,495
2,460
2,425
2,400
2,365
4,160
4,100
4,040
4,000
3,940
7,490
7,380
7,270
7,200
7,090
850
900
950
1000
1050
65
50
35
20
20
465
450
385
365
355
930
900
775
725
705
1,395
1,350
1,160
1,090
1,060
2,330
2,245
1,930
1,820
1,765
3,880
3,745
3,220
3,030
2,945
6,985
6,740
5,795
5,450
5,295
1100
1150
1200
1250
1300
20
20
20
20
20
260
190
135
105
75
520
375
275
205
150
780
565
410
310
225
1,305
945
685
515
375
2,170
1,570
1,114
855
630
3,910
2,830
2,055
1,545
1,130
1350
1400
1450
1500
20
15
15
10
60
45
35
25
115
90
70
50
175
135
105
75
290
225
170
130
485
370
285
215
875
670
515
385
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
136
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-2.6
A 312 Gr. TP309H
Ratings for Group 2.6 Materials (Cont’d)
A 240 Gr. 309H
A 358 Gr. 309H
B – Special Class
Working Pressures by Class, psig
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
270
250
235
220
750
705
650
610
580
1,500
1,410
1,295
1,215
1,155
2,250
2,115
1,945
1,825
1,735
3,750
3,520
3,240
3,040
2,895
6,250
5,870
5,400
5,065
4,820
11,250
10,565
9,725
9,120
8,680
600
650
700
750
800
215
210
205
205
200
555
550
540
535
530
1,115
1,100
1,080
1,070
1,055
1,670
1,645
1,625
1,605
1,585
2,785
2,745
2,705
2,680
2,640
4,645
4,575
4,510
4,465
4,395
8,355
8,235
8,115
8,035
7,915
850
900
950
1000
1050
200
195
180
160
160
520
510
470
420
420
1,040
1,025
945
840
840
1,560
1,535
1,415
1,260
1,260
2,600
2,560
2,360
2,105
1,105
4,330
4,265
3,930
3,505
3,505
7,795
7,675
7,070
6,310
6,310
1100
1150
1200
1250
1300
125
90
65
50
35
325
235
170
130
95
650
470
345
255
190
975
705
515
385
285
1,630
1,180
855
645
470
2,715
1,965
1,430
1,070
785
4,885
3,535
2,570
1,930
1,415
1350
1400
1450
1500
30
20
15
10
75
55
45
30
145
110
85
65
220
165
130
95
365
280
215
160
605
465
355
270
1,095
835
645
480
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°F
137
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Ratings for Group 2.7 Materials
Table VII-2-2.7
A 182 Gr. F310H
A 240 Gr. 310H
A 312 Gr. TP310H
A 479 Gr. 310H
A 358 Gr. 310H
A – Standard Class
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
275
245
225
200
170
720
635
580
540
515
1,440
1,270
1,160
1,085
1,025
2,160
1,910
1,740
1,625
1,540
3,600
3,180
2,905
2,710
2,570
6,000
5,300
4,840
4,520
4,280
10,080
9,540
8,710
8,135
7,705
600
650
700
750
800
140
125
110
95
80
495
485
480
470
465
990
970
955
940
930
1,485
1,455
1,435
1,410
1,395
2,470
2,425
2,390
2,350
2,330
4,120
4,040
3,980
3,920
3,880
7,415
7,270
7,165
7,055
6,985
850
900
950
1000
1050
65
50
35
20
20
460
450
385
365
355
915
900
775
725
705
1,375
1,350
1,160
1,090
1,060
2,290
2,245
1,930
1,820
1,765
3,820
3,745
3,220
3,030
2,945
6,875
6,740
5,795
5,450
5,295
1100
1150
1200
1250
1300
20
20
20
20
20
260
190
135
105
75
520
375
275
205
150
780
565
410
310
225
1,305
945
685
515
375
2,170
1,570
1,145
855
630
3,910
2,830
2,055
1,545
1,130
1350
1400
1450
1500
20
15
15
10
60
45
35
25
115
90
65
50
175
135
100
75
290
225
165
130
485
370
275
215
875
670
500
385
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
138
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, psig
Temperature,
°F
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-2.7
A 182 Gr. F310H
A 240 Gr. 310H
Ratings for Group 2.7 Materials (Cont’d)
A 312 Gr. TP310H
A 479 Gr. 310H
A 358 Gr. 310H
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
270
250
230
220
750
710
650
605
575
1,500
1,420
1,295
1,210
1,145
2,250
2,130
1,945
1,815
1,720
3,750
3,550
3,240
3,025
2,865
6,250
5,915
5,400
5,045
4,775
11,250
10,645
9,725
9,080
8,600
600
650
700
750
800
210
205
205
200
200
550
540
535
525
520
1,105
1,080
1,065
1,050
1,040
1,655
1,625
1,600
1,575
1,560
2,760
2,705
2,665
2,625
2,600
4,600
4,510
4,440
4,375
4,330
8,275
8,115
7,995
7,875
7,795
850
900
950
1000
1050
195
195
180
160
160
510
505
470
420
420
1,025
1,005
945
840
840
1,535
1,510
1,415
1,260
1,260
2,560
2,520
2,360
2,105
2,105
4,265
4,195
3,930
3,505
3,505
7,675
7,555
7,070
6,310
6,310
1100
1150
1200
1250
1300
125
90
65
50
35
325
235
170
130
95
650
470
345
255
190
975
705
515
385
285
1,630
1,180
855
645
470
2,715
1,965
1,430
1,070
785
4,885
3,535
2,570
1,930
1,415
1350
1400
1450
1500
30
20
15
10
75
55
40
30
145
110
85
65
220
165
125
95
365
280
210
160
605
465
345
270
1,095
835
625
480
139
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Ratings for Group 2.8 Materials
Table VII-2-2.8
A
A
A
A
182
182
182
182
Gr.
Gr.
Gr.
Gr.
F44
F51 (1)
F55
F53 (1)
A
A
A
A
A 312 Gr. S31254
A 358 Gr. S31254
240
240
240
240
Gr.
Gr.
Gr.
Gr.
S31803 (1)
S32760 (1)
S31254
S32750 (1)
A
A
A
A
A 351 Gr. CK3MCuN
A 479 Gr. S31803 (1)
479
479
789
789
Gr.
Gr.
Gr.
Gr.
S31254
S32750 (1)
S32750 (1)
S32760 (1)
A 789 Gr. S31803 (1)
A 790 Gr. S32750 (1)
A 790
A 790
A 351
A 351
A 351
(1)
Gr.
Gr.
Gr.
Gr.
Gr.
S31803 (1)
S32760 (1)
CE8M (1)
CD4MCuN (1)
CD3MWCuN
NOTE:
(1) This steel may become brittle after service at moderately elevated temperatures. Not to be used over 600°F.
A – Standard Class
Working Pressures by Class, psig
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
745
665
615
580
1,500
1,490
1,335
1,230
1,160
2,250
2,230
2,000
1,845
1,740
3,750
3,720
3,335
3,070
2,905
6,250
6,200
5,560
5,120
4,840
11,250
11,160
10,010
9,215
8,710
140
125
110
95
555
545
540
530
1,115
1,095
1,085
1,065
1,670
1,640
1,625
1,595
2,785
2,735
2,710
2,660
4,640
4,560
4,520
4,430
8,350
8,210
8,135
7,970
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°F
600
650
700
750
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
285
265
250
750
750
745
685
650
1,500
1,500
1,490
1,370
1,295
2,250
2,250
2,235
2,055
1,945
3,750
3,750
3,725
3,430
3,240
6,250
6,250
6,205
5,715
5,400
11,250
11,250
11,170
10,285
9,725
600
650
700
750
240
235
230
230
620
610
605
600
1,245
1,220
1,210
1,200
1,865
1,830
1,815
1,800
3,105
3,055
3,025
3,000
5,180
5,090
5,045
5,000
9,320
9,160
9,080
9,000
140
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-2.9
A 240 Gr. 309S (1)(2)(3)
Ratings For Group 2.9 Materials
A 240 Gr. 310S (1)(2)(3)
A 479 Gr. 310S (1)(2)(3)
NOTES:
(1) At temperatures above 1000°F, use only when the carbon content is 0.04% or higher.
(2) For temperatures above 1000°F, use only if the material is solution heat treated to the minimum temperature specified
in the material specification but not lower than 1900°F and quenching in water or rapidly cooling by other means.
(3) This material should be used for service temperatures 960°F and above only when assurance is provided that grain
size is not finer than ASTM 6.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
275
240
225
200
170
720
630
580
540
515
1,440
1,260
1,160
1,085
1,025
2,160
1,895
1,740
1,625
1,540
3,600
3,155
2,905
2,710
2,570
6,000
5,260
4,840
4,520
4,280
10,800
9,470
8,710
8,135
7,705
600
650
700
750
800
140
125
110
95
80
495
485
480
470
465
990
970
955
940
930
1,485
1,455
1,435
1,410
1,395
2,470
2,425
2,390
2,350
2,330
4,120
4,040
3,980
3,920
3,880
7,415
7,270
7,165
7,055
6,985
850
900
950
1000
1050
65
50
35
20
20
460
450
385
340
245
915
900
775
680
485
1,375
1,350
1,160
1,020
730
2,290
2,245
1,930
1,695
1,215
3,820
3,745
3,220
2,830
2,030
6,875
6,740
5,795
5,090
3,650
1100
1150
1200
1250
1300
20
20
20
20
10
170
125
85
50
25
345
245
170
105
55
515
370
255
155
80
855
615
430
255
135
1,430
1,030
715
430
230
2,570
1,850
1,285
770
410
1350
1400
1450
1500
5
5
5
5
15
15
10
5
35
25
20
15
50
40
30
20
85
70
50
35
145
115
85
55
255
205
155
105
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
141
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-2.9
A 240 Gr. 309S (1)(2)(3)
Ratings For Group 2.9 Materials (Cont’d)
A 240 Gr. 310S (1)(2)(3)
A 479 Gr. 310S (1)(2)(3)
NOTES
(1) At temperatures above 1000°F, use only when the carbon content is 0.04% or higher.
(2) For temperatures above 1000°F, use only if the material is solution heat treated to the minimum temperature specified
in the material specification but not lower than 1900°F and quenching in water or rapidly cooling by other means.
(3) This material should be used for service temperatures 960°F and above only when assurance is provided that grain
size is not finer than ASTM 6.
B – Special Class
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
270
250
230
220
750
705
650
605
575
1,500
1,410
1,295
1,210
1,145
2,250
2,115
1,945
1,815
1,720
3,750
3,520
3,240
3,025
2,865
6,250
5,870
5,400
5,045
4,775
11,250
10,565
9,725
9,080
8,600
600
650
700
750
800
210
205
205
200
200
550
540
535
525
520
1,105
1,080
1,065
1,050
1,040
1,655
1,625
1,600
1,575
1,560
2,760
2,705
2,665
2,625
2,600
4,600
4,510
4,440
4,375
4,330
8,275
8,115
7,995
7,875
7,795
850
900
950
1000
1050
195
195
180
160
115
510
505
470
420
305
1,025
1,005
945
840
610
1,535
1,510
1,415
1,260
915
2,560
2,520
2,360
2,105
1,520
4,265
4,195
3,930
3,505
2,535
7,675
7,555
7,070
6,310
4,565
1100
1150
1200
1250
1300
80
60
40
25
15
215
155
105
65
35
430
310
215
130
70
645
465
320
195
105
1,070
770
535
320
170
1,785
1,285
895
535
285
3,215
2,315
1,605
965
515
1350
1400
1450
1500
10
5
5
5
20
15
15
10
45
35
25
15
65
50
40
25
105
85
65
45
180
145
105
70
320
255
195
130
142
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, psig
Temperature,
°F
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-2.10
Ratings For Group 2.10 Materials
A 351 Gr. CH8 (1)
A 351 Gr. CH20 (1)
NOTE:
(1) At temperatures above 1000°F, use only when the carbon content is 0.04% or higher.
A – Standard Class
Working Pressures by Class, psig
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
260
210
195
185
170
670
550
505
485
470
1,345
1,100
1,015
970
940
2,015
1,650
1,520
1,455
1,410
3,360
2,750
2,530
2,425
2,350
5,600
4,580
4,220
4,040
3,920
10,080
8,245
7,595
7,270
7,055
600
650
700
750
800
140
125
110
95
80
455
445
435
420
410
910
895
870
845
820
1,370
1,340
1,305
1,265
1,230
2,280
2,230
2,170
2,110
2,050
3,800
3,720
3,620
3,520
3,420
6,840
6,695
6,515
6,335
6,155
850
900
950
1000
1050
65
50
35
20
20
400
385
370
340
290
795
770
740
675
585
1,195
1,150
1,110
1,015
875
1,990
1,920
1,850
1,690
1,455
3,320
3,200
3,080
2,820
2,430
5,975
5,760
5,545
5,075
4,370
1100
1150
1200
1250
1300
20
20
20
20
20
225
170
130
100
80
445
345
260
200
160
670
515
390
300
235
1,115
855
650
495
395
1,855
1,430
1,085
830
655
3,345
2,570
1,955
1,490
1,185
1350
1400
1450
1500
20
15
10
10
60
45
30
25
125
90
60
55
185
135
95
80
310
225
155
135
515
370
255
230
925
670
465
410
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
143
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-2.10
Ratings For Group 2.10 Materials (Cont’d)
A 351 Gr. CH8 (1)
A 351 Gr. CH20 (1)
NOTE:
(1) At temperatures above 1000°F, use only when the carbon content is 0.04% or higher.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
265
235
215
205
200
695
615
565
540
525
1,395
1,225
1,130
1,080
1,050
2,090
1,840
1,695
1,625
1,575
3,480
3,065
2,825
2,705
2,625
5,805
5,110
4,710
4,510
4,375
10,445
9,200
8,480
8,115
7,875
600
650
700
750
800
195
190
185
180
175
510
500
485
470
460
1,020
995
970
945
915
1,525
1,495
1,455
1,415
1,375
2,545
2,490
2,425
2,355
2,290
4,240
4,150
4,040
3,930
3,815
7,635
7,475
7,270
7,070
6,870
850
900
950
1000
1050
170
165
160
150
140
445
430
415
395
365
890
855
825
795
730
1,335
1,285
1,240
1,190
1,095
2,225
2,145
2,065
1,980
1,820
3,705
3,570
3,440
3,305
3,035
6,670
6,430
6,190
5,945
5,465
1100
1150
1200
1250
1300
105
80
60
50
40
280
215
165
125
100
555
430
325
250
195
835
645
490
375
295
1,395
1,070
815
620
495
2,320
1,785
1,355
1,035
820
4,180
3,215
2,445
1,865
1,480
1350
1400
1450
1500
30
20
15
15
75
55
40
35
155
110
75
70
230
165
115
105
385
280
195
170
645
465
320
285
1,155
835
580
515
144
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-2.11
Ratings For Group 2.11 Materials
A 351 Gr. CF8C (1)
NOTE:
(1) At temperatures above 1000°F, use only when the carbon content is 0.04% or higher.
A – Standard Class
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
275
255
230
200
170
720
660
615
575
540
1,440
1,325
1,235
1,150
1,085
2,160
1,985
1,850
1,730
1,625
3,600
3,310
3,085
2,880
2,710
6,000
5,520
5,140
4,800
4,520
10,800
9,935
9,250
8,640
8,135
600
650
700
750
800
140
125
110
95
80
515
505
495
490
485
1,030
1,015
995
985
975
1,550
1,520
1,490
1,475
1,460
2,580
2,530
2,485
2,460
2,435
4,300
4,220
4,140
4,100
4,060
7,740
7,595
7,450
7,380
7,310
850
900
950
1000
1050
65
50
35
20
20
485
450
385
365
360
970
900
775
725
720
1,455
1,350
1,160
1,090
1,080
2,425
2,245
1,930
1,820
1,800
4,040
3,745
3,220
3,030
3,000
7,270
6,740
5,795
5,450
5,400
1100
1150
1200
1250
1300
20
20
20
20
20
310
210
150
115
75
625
420
300
225
150
935
625
455
340
225
1,560
1,045
755
565
375
2,600
1,745
1,255
945
630
4,680
3,135
2,265
1,695
1,130
1350
1400
1450
1500
20
15
10
10
50
40
30
25
105
80
60
55
155
125
95
80
255
205
155
135
430
345
255
230
770
615
465
410
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
145
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, psig
Temperature,
°F
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-2.11
Ratings For Group 2.11 Materials (Cont’d)
A 351 Gr. CF8C (1)
NOTE:
(1) At temperatures above 1000°F, use only when the carbon content is 0.04% or higher.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
275
255
240
230
750
715
660
620
600
1,500
1,435
1,320
1,245
1,200
2,250
2,150
1,975
1,865
1,800
3,750
3,585
3,295
3,105
3,000
6,250
5,975
5,490
5,180
5,000
1,1250
10,750
9,885
9,320
9,000
600
650
700
750
800
220
215
215
210
210
575
565
555
550
545
1,150
1,130
1,110
1,100
1,090
1,730
1,695
1,665
1,645
1,630
2,880
2,825
2,770
2,745
2,720
4,800
4,710
4,620
4,575
4,530
8,640
8,480
8,315
8,235
8,155
850
900
950
1000
1050
205
205
180
160
160
540
540
470
420
420
1,080
1,080
945
840
840
1,625
1,625
1,415
1,260
1,260
2,705
2,705
2,360
2,105
2,105
4,510
4,510
3,930
3,505
3,505
8,115
8,115
7,070
6,310
6,310
1100
1150
1200
1250
1300
150
100
70
55
35
390
260
190
140
95
780
525
375
285
190
1,170
785
565
425
285
1,950
1,305
945
705
470
3,250
2,180
1,570
1,180
785
5,850
3,920
2,830
2,120
1,415
1350
1400
1450
1500
25
20
15
15
65
50
40
35
130
105
75
70
195
155
115
105
320
255
195
170
535
430
320
285
965
770
580
515
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
146
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-2.12
Ratings For Group 2.12 Materials
A 351 Gr. CK20 (1)
NOTE:
(1) At temperatures above 1000°F, use only when the carbon content is 0.04% or higher.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
260
210
195
185
170
670
550
505
485
470
1,345
1,100
1,015
970
940
2,015
1,650
1,520
1,455
1,410
3,360
2,750
2,530
2,425
2,350
5,600
4,580
4,220
4,040
3,920
10,080
8,245
7,595
7,270
7,055
600
650
700
750
800
140
125
110
95
80
455
445
435
420
410
910
895
870
845
820
1,370
1,340
1,305
1,265
1,230
2,280
2,230
2,170
2,110
2,050
3,800
3,720
3,620
3,520
3,420
6,840
6,695
6,515
6,335
6,155
850
900
950
1000
1050
65
50
35
20
20
400
385
370
340
325
795
770
740
675
650
1,195
1,150
1,110
1,015
975
1,990
1,920
1,850
1,690
1,630
3,320
3,200
3,080
2,820
2,715
5,975
5,760
5,545
5,075
4,885
1100
1150
1200
1250
1300
20
20
20
20
20
290
250
205
165
120
585
500
410
330
240
875
750
615
495
360
1,455
1,250
1,030
825
600
2,430
2,085
1,715
1,370
1,000
4,370
3,755
3,085
2,470
1,800
1350
1400
1450
1500
20
20
15
10
80
55
40
25
165
110
75
55
245
165
115
80
410
275
190
135
685
455
315
230
1,235
825
565
410
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
147
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-2.12
Ratings For Group 2.12 Materials (Cont’d)
A 351 Gr. CK20 (1)
NOTE:
(1) At temperatures above 1000°F, use only when the carbon content is 0.04% or higher.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
265
235
215
205
200
695
615
565
540
525
1,395
1,225
1,130
1,080
1,050
2,090
1,840
1,695
1,625
1,575
3,480
3,065
2,825
2,705
2,625
5,805
5,110
4,710
4,510
4,375
10,445
9,200
8,480
8,115
7,875
600
650
700
750
800
195
190
185
180
175
510
500
485
470
460
1,020
995
970
945
915
1,525
1,495
1,455
1,415
1,375
2,545
2,490
2,425
2,355
2,290
4,240
4,150
4,040
3,930
3,815
7,635
7,475
7,270
7,070
6,870
850
900
950
1000
1050
170
165
160
150
155
445
430
415
395
405
890
855
825
795
815
1,335
1,285
1,240
1,190
1,220
2,225
2,145
2,065
1,980
2,035
3,705
3,570
3,440
3,305
3,395
6,670
6,430
6,190
5,945
6,105
1100
1150
1200
1250
1300
140
120
100
80
60
365
315
255
205
150
730
625
515
410
300
1,095
940
770
615
450
1,820
1,565
1,285
1,030
750
3,035
2,605
2,145
1,715
1,250
5,465
4,695
3,855
3,085
2,250
1350
1400
1450
1500
40
25
20
15
105
70
45
35
205
135
95
70
310
205
140
105
515
345
235
170
855
570
395
285
1,545
1,030
705
515
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
148
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-3.1
B 462 Gr. N08020 (1)
Ratings for Group 3.1 Materials
B 463 Gr. N08020 (1)
B 464 Gr. N08020 (1)
B 468 Gr. N08020 (1)
B 473 Gr. N08020 (1)
NOTE:
(1) Use annealed material only.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
740
710
680
655
1,500
1,485
1,420
1,365
1,310
2,250
2,225
2,130
2,045
1,965
3,750
3,710
3,550
3,410
3,275
6,250
6,180
5,920
5,680
5,460
11,250
11,125
10,655
10,225
9,830
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
9,070
8,825
8,515
7,970
7,610
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
290
290
280
750
750
750
750
730
1,500
1,500
1,500
1,500
1,465
2,250
2,250
2,250
2,250
2,195
3,750
3,750
3,750
3,750
3,655
6,250
6,250
6,250
6,250
6,095
11,250
11,250
11,250
11,250
10,970
600
650
700
750
800
270
270
265
265
260
710
700
695
690
675
1,420
1,405
1,395
1,380
1,350
2,130
2,105
2,090
2,075
2,025
3,550
3,510
3,480
3,455
3,375
5,915
5,850
5,805
5,760
5,625
10,645
10,525
10,445
10,365
10,125
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
149
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-3.2
B 160 Gr. N02200 (1)(2)
Ratings for Group 3.2 Materials
B 161 Gr. N02200 (1)
B 162 Gr. N02200 (1)
B 163 Gr. N02200 (1)
NOTES:
(1) Use annealed material only.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
185
185
185
185
170
480
480
480
480
455
960
960
960
960
905
1,440
1,440
1,440
1,440
1,360
2,400
2,400
2,400
2,400
2,270
4,000
4,000
4,000
4,000
3,780
7,200
7,200
7,200
7,200
6,805
600
140
415
825
1,240
2,065
3,440
6,190
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
100
200
300
400
500
205
205
205
205
195
535
535
535
535
505
1,070
1,070
1,070
1,070
1,015
1,605
1,605
1,605
1,605
1,520
2,680
2,680
2,680
2,680
2,530
4,465
4,465
4,465
4,465
4,220
8,035
8,035
8,035
8,035
7,595
600
175
460
920
1,380
2,305
3,840
6,910
150
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-3.3
B 160 Gr. N02201 (1)(2)
Ratings for Group 3.3 Materials
B 162 Gr. N02201 (1)
NOTES:
(1) Use annealed material only.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, psig
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
90
90
85
85
85
240
230
225
225
225
480
460
450
450
450
720
690
675
655
655
1,200
1,150
1,130
1,130
1,130
2,000
1,920
1,880
1,880
1,880
3,600
3,455
3,385
3,385
3,385
600
650
700
750
800
85
85
85
85
80
225
225
225
220
215
450
445
445
440
430
675
670
670
660
650
1,130
1,115
1,115
1,105
1,080
1,880
1,860
1,860
1,840
1,800
3,385
3,350
3,350
3,310
3,240
850
900
950
1000
1050
65
50
35
20
20
210
205
195
190
80
420
415
395
380
165
635
620
590
570
245
1,055
1,030
985
950
410
1,760
1,720
1,640
1,580
685
3,170
3,095
2,950
2,845
1,235
1100
1150
1200
20
20
15
70
50
40
135
105
80
205
155
125
345
255
205
570
430
345
1,030
770
615
GENERAL NOTE:
(a) Flanged end ratings terminate at 1000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
105
100
95
95
95
270
255
250
250
250
535
515
505
505
505
805
770
755
755
755
1,340
1,285
1,260
1,260
1,260
2,230
2,145
2,100
2,100
2,100
4,020
3,855
3,775
3,775
3,775
600
650
700
750
800
95
95
95
95
90
250
250
250
245
240
505
500
500
495
480
755
745
745
740
725
1,260
1,245
1,245
1,130
1,205
2,100
2,075
2,075
2,055
2,010
3,775
3,735
3,735
3,695
3,615
850
900
950
1000
1050
90
90
85
80
40
235
230
220
210
105
470
460
440
425
205
705
690
660
635
310
1,180
1,150
1,100
1,060
515
1,965
1,920
1,830
1,765
855
3,535
3,455
3,295
3,175
1,545
1100
1150
1200
35
25
20
85
65
50
170
130
105
255
195
155
430
320
255
715
535
430
1,285
965
770
151
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-3.4
B 127 Gr. N04400 (1)
B 163 Gr. N04400 (1)
Ratings for Group 3.4 Materials
B 164 Gr. N04400 (1)
B 164 Gr. N04405 (1)(2)
B 165 Gr. N04400 (1)
B 564 Gr. N04400 (1)
NOTES:
(1) Use annealed material only.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
230
200
190
180
170
600
525
490
475
475
1,200
1,050
980
945
945
1,800
1,575
1,470
1,420
1,420
3,000
2,630
2,450
2,365
2,365
5,000
4,380
4,080
3,940
3,940
9,000
7,885
7,345
7,090
7,090
600
650
700
750
800
140
125
110
95
80
475
475
470
465
460
945
945
940
930
915
1,420
1,420
1,410
1,395
1,375
2,365
2,365
2,350
2,330
2,290
3,940
3,940
3,920
3,880
3,820
7,090
7,090
7,055
6,985
6,875
850
900
65
50
375
275
755
550
1,130
825
1,885
1,370
3,145
2,285
5,655
4,115
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
255
225
210
200
200
670
585
545
530
530
1,340
1,175
1,095
1,055
1,055
2,010
1,760
1,640
1,585
1,585
3,350
2,935
2,730
2,640
2,640
5,580
4,890
4,555
4,395
4,395
10,045
8,800
8,195
7,915
7,915
600
650
700
750
800
200
200
200
200
195
530
530
525
520
510
1,055
1,055
1,050
1,040
1,025
1,585
1,585
1,575
1,560
1,535
2,640
2,640
2,625
2,600
2,560
4,395
4,395
4,375
4,330
4,265
7,915
7,915
7,875
7,795
7,675
850
900
180
130
470
345
945
685
1,415
1,030
2,355
1,715
3,930
2,855
7,070
5,145
152
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-3.5
B 163 Gr. N06600 (1)
Ratings for Group 3.5 Materials
B 166 Gr. N06600 (1)
B 168 Gr. N06600 (1)
B 564 Gr. N06600 (1)
NOTE:
(1) Use annealed material only.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
750
730
705
665
1,500
1,500
1,455
1,410
1,330
2,250
2,250
2,185
2,115
1,995
3,750
3,750
3,640
3,530
3,325
6,250
6,250
6,070
5,880
5,540
11,250
11,250
10,925
10,585
9,965
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
9,070
8,825
8,515
7,970
7,610
850
900
950
1000
1050
65
50
35
20
20
485
450
365
240
155
975
900
725
480
310
1,460
1,350
1,090
720
465
2,435
2,245
1,815
1,200
770
4,060
3,745
3,030
2,000
1,285
7,305
6,740
5,450
3,600
2,315
1100
1150
1200
20
20
20
105
75
70
205
150
135
310
225
205
515
375
345
855
630
570
1,545
1,130
1,030
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
290
290
290
750
750
750
750
750
1,500
1,500
1,500
1,500
1,500
2,250
2,250
2,250
2,250
2,250
3,750
3,750
3,750
3,750
3,750
6,250
6,250
6,250
6,250
6,250
11,250
11,250
11,250
11,250
11,250
600
650
700
750
800
290
290
280
280
275
750
750
735
730
720
1,500
1,500
1,465
1,460
1,440
2,250
2,250
2,200
2,185
2,160
3,750
3,750
3,665
3,645
3,600
6,250
6,250
6,110
6,070
6,000
11,250
11,250
10,995
10,930
10,800
850
900
950
1000
1050
260
230
175
115
75
680
600
455
300
195
1,355
1,200
910
600
385
2,030
1,800
1,365
900
580
3,385
3,000
2,270
1,500
965
5,645
5,000
3,785
2,500
1,605
10,160
9,000
6,815
4,500
2,895
1100
1150
1200
50
35
35
130
95
85
255
190
170
385
285
255
645
470
430
1,070
785
715
1,930
1,415
1,285
153
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-3.6
B 163 Gr. N08800 (1)
Ratings for Group 3.6 Materials
B 408 Gr. N08800 (1)
B 409 Gr. N08800 (1)
B 564 Gr. N08800 (1)
NOTE:
(1) Use annealed material only.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
275
255
230
200
170
720
665
640
620
600
1,440
1,330
1,275
1,240
1,205
2,160
1,995
1,915
1,860
1,805
3,600
3,325
3,190
3,095
3,010
6,000
5,540
5,320
5,160
5,020
10,800
9,970
9,575
9,290
9,035
600
650
700
750
800
140
125
110
95
80
590
580
570
530
510
1,175
1,155
1,135
1,065
1,015
1,765
1,735
1,705
1,595
1,525
2,940
2,890
2,840
2,660
2,540
4,900
4,820
4,730
4,430
4,230
8,820
8,675
8,515
7,970
7,610
850
900
950
1000
1050
65
50
35
20
20
485
450
385
365
360
975
900
775
725
720
1,460
1,350
1,160
1,090
1,080
2,435
2,245
1,930
1,820
1,800
4,060
3,745
3,220
3,030
3,000
7,305
6,740
5,795
5,450
5,400
1100
1150
1200
1250
1300
20
20
20
20
20
325
275
205
145
70
645
550
410
290
135
965
825
620
430
205
1,610
1,370
1,030
720
345
2,685
2,285
1,715
1,200
570
4,835
4,115
3,085
2,160
1,030
1350
1400
1450
1500
20
15
15
10
50
40
35
25
110
75
70
55
165
115
105
80
275
190
170
135
455
315
285
230
825
565
515
410
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
154
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-3.6
B 163 Gr. N08800 (1)
Ratings for Group 3.6 Materials (cont’d)
B 408 Gr. N08800 (1)
B 409 Gr. N08800 (1)
B 564 Gr. N08800 (1)
NOTE:
(1) Use annealed material only.
B – Special Class
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
285
275
265
260
750
740
715
690
670
1,500
1,485
1,425
1,380
1,345
2,250
2,225
2,140
2,075
2,015
3,750
3,710
3,565
3,455
3,360
6,250
6,185
5,940
5,760
5,605
11,250
11,130
10,690
10,365
10,085
600
650
700
750
800
250
245
245
240
240
655
645
640
630
620
1,315
1,290
1,275
1,260
1,245
1,970
1,935
1,915
1,890
1,865
3,280
3,230
3,190
3,145
3,105
5,470
5,380
5,315
5,245
5,180
9,845
9,685
9,565
9,440
9,320
850
900
950
1000
1050
235
230
180
160
160
615
600
470
420
420
1,225
1,200
945
840
840
1,840
1,800
1,415
1,260
1,260
3,065
3,000
2,360
2,105
2,105
5,110
5,000
3,930
3,505
3,505
9,200
9,000
7,070
6,310
6,310
1100
1150
1200
1250
1300
155
130
100
70
35
405
345
260
180
85
805
685
515
360
170
1,210
1,030
770
540
255
2,015
1,715
1,285
900
430
3,360
2,860
2,145
1,500
715
6,045
5,145
3,860
2,700
1,285
1350
1400
1450
1500
25
20
15
15
70
45
45
35
135
95
85
70
205
140
130
105
345
235
215
170
570
395
355
285
1,030
705
645
515
155
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, psig
Temperature,
°F
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-3.7
B 333 Gr. N10665 (1)
B 333 Gr. N10675 (1)
B 335 Gr. N10665 (1)(2)
Ratings for Group 3.7 Materials
B 335 Gr. N10675 (1)(2)
B 462 Gr. N10665 (1)
B 462 Gr. N10675 (1)
B 564 Gr. N10665 (1)
B 564 Gr. N10675 (1)
B 622 Gr. N10665 (1)
B 622 Gr. N10675 (1)
NOTES:
(1) Use solution annealed material only.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
750
730
705
665
1,500
1,500
1,455
1,410
1,330
2,250
2,250
2,185
2,115
1,995
3,750
3,750
3,640
3,530
3,325
6,250
6,250
6,070
5,880
5,540
11,250
11,250
10,925
10,585
9,965
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
9,070
8,825
8,515
7,970
7,610
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
290
290
290
750
750
750
750
750
1,500
1,500
1,500
1,500
1,500
2,250
2,250
2,250
2,250
2,250
3,750
3,750
3,750
3,750
3,750
6,250
6,250
6,250
6,250
6,250
11,250
11,250
11,250
11,250
11,250
600
650
700
750
800
290
290
280
280
275
750
750
735
730
720
1,500
1,500
1,465
1,460
1,440
2,250
2,250
2,200
2,185
2,160
3,750
3,750
3,665
3,645
3,600
6,250
6,250
6,110
6,070
6,000
11,250
11,250
10,995
10,930
10,800
156
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-3.8
B
B
B
B
B
B
B
333
335
423
424
425
434
443
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
N10001
N10001
N08825
N08825
N08825
N10003
N06625
(1)(2)
(1)(2)(6)
(3)(7)
(3)(7)
(3)(6)(7)
(3)
(3)(4)
B
B
B
B
B
B
B
B
446
462
462
462
564
564
564
564
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
N06625
N06022
N06200
N10276
N06022
N06200
N06625
N08825
Ratings for Group 3.8 Materials
(3)(4)
(1)(5)
(1)(2)
(1)(5)
(1)(5)
(1)(2)
(3)(4)
(3)(7)
B
B
B
B
B
B
B
B
564
573
574
574
574
574
575
575
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
N10276
N10003
N06022
N06200
N06455
N10276
N06022
N06200
(1)(5)
(3)(6)
(1)(5)(6)
(1)(2)(6)
(1)(2)(6)
(1)(5)(6)
(1)(5)
(1)(2)
B
B
B
B
B
B
B
575
575
622
622
622
622
622
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
N06455
N10276
N06022
N06200
N06455
N10001
N10276
(1)(2)
(1)(5)
(1)(5)
(1)(2)
(1)(2)
(2)(3)
(1)(5)
NOTES:
(1) Use solution annealed material only.
(2) Not to be used over 800°F.
(3) Use annealed material only.
(4) Not to be used over 1200°F. Alloy N06625 in the annealed condition is subject to severe loss of impact strength at
room temperatures after exposure in the range of 1000°F to 1400°F.
(5) Not to be used over 1250°F.
(6) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
(7) Not to be used over 1000°F.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
750
730
700
665
1,500
1,500
1,455
1,395
1,330
2,250
2,250
2,185
2,095
1,995
3,750
3,750
3,640
3,490
3,325
6,250
6,250
6,070
5,820
5,540
11,250
11,250
10,925
10,475
9,965
600
650
700
750
800
140
125
110
95
80
605
590
570
530
510
1,210
1,175
1,135
1,065
1,015
1,815
1,765
1,705
1,595
1,525
3,025
2,940
2,840
2,660
2,540
5,040
4,905
4,730
4,430
4,230
9,070
8,825
8,515
7,970
7,610
850
900
950
1000
1050
65
50
35
20
20
485
450
385
365
360
975
900
775
725
720
1,460
1,350
1,160
1,090
1,080
2,435
2,245
1,930
1,820
1,800
4,060
3,745
3,220
3,030
3,000
7,305
6,740
5,795
5,450
5,400
1100
1150
1200
1250
1300
20
20
20
20
20
325
275
205
165
120
645
550
410
330
240
965
825
615
495
360
1,610
1,370
1,030
825
600
2,685
2,285
1,715
1,370
1,000
4,835
4,115
3,085
2,470
1,800
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
157
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
B
B
B
B
B
B
B
333
335
423
424
425
434
443
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
N10001
N10001
N08825
N08825
N08825
N10003
N06625
(1)(2)
(1)(2)(6)
(3)(7)
(3)(7)
(3)(6)(7)
(3)
(3)(4)
B
B
B
B
B
B
B
B
446
462
462
462
564
564
564
564
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Ratings for Group 3.8 Materials (Cont’d)
N06625
N06022
N06200
N10276
N06022
N06200
N06625
N08825
(3)(4)
(1)(5)
(1)(2)
(1)(5)
(1)(5)
(1)(2)
(3)(4)
(3)(7)
B
B
B
B
B
B
B
B
564
573
574
574
574
574
575
575
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
N10276
N10003
N06022
N06200
N06455
N10276
N06022
N06200
(1)(5)
(3)(6)
(1)(5)(6)
(1)(2)(6)
(1)(2)(6)
(1)(5)(6)
(1)(5)
(1)(2)
B
B
B
B
B
B
B
575
575
622
622
622
622
622
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
Gr.
N06455
N10276
N06022
N06200
N06455
N10001
N10276
(1)(2)
(1)(5)
(1)(5)
(1)(2)
(1)(2)
(2)(3)
(1)(5)
NOTES:
(1) Use solution annealed material only.
(2) Not to be used over 800°F.
(3) Use annealed material only.
(4) Not to be used over 1200°F. Alloy N06625 in the annealed condition is subject to severe loss of impact strength at
room temperatures after exposure in the range of 1000°F to 1400°F.
(5) Not to be used over 1250°F.
(6) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
(7) Not to be used over 1000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
290
290
285
750
750
750
750
745
1,500
1,500
1,500
1,500
1,490
2,250
2,250
2,250
2,250
2,235
3,750
3,750
3,750
3,750
3,725
6,250
6,250
6,250
6,250
6,205
11,250
11,250
11,250
11,250
11,170
600
650
700
750
800
275
270
265
265
265
715
705
695
690
685
1,430
1,410
1,395
1,375
1,370
2,145
2,115
2,090
2,065
2,055
3,575
3,520
3,480
3,440
3,430
5,960
5,870
5,805
5,735
5,715
10,730
10,565
10,445
10,325
10,285
850
900
950
1000
1050
260
230
180
160
160
675
600
470
420
420
1,355
1,200
945
840
840
2,030
1,800
1,415
1,260
1,260
3,385
3,000
2,360
2,105
2,105
5,645
5,000
3,930
3,505
3,505
10,160
9,000
7,070
6,310
6,310
1100
1150
1200
1250
1300
155
130
100
80
60
405
345
255
205
150
805
685
515
410
300
1,210
1,030
770
615
450
2,015
1,715
1,285
1,030
750
3,360
2,860
2,145
1,715
1,250
6,045
5,145
3,855
3,085
2,250
158
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Table VII-2-3.8
MANDATORY APPENDIX VII
ASME B16.34-2004
Ratings for Group 3.9 Materials
Table VII-2-3.9
B 435 Gr. N06002 (1)
B 572 Gr. N06002 (1)(2)
B 622 Gr. N06002 (1)
NOTES:
(1) Use solution annealed material only.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
750
690
640
595
1,500
1,500
1,380
1,275
1,190
2,250
2,250
2,075
1,915
1,785
3,750
3,750
3,455
3,190
2,975
6,250
6,250
5,760
5,320
4,960
11,250
11,250
10,370
9,575
8,930
600
650
700
750
800
140
125
110
95
80
565
550
540
530
510
1,130
1,105
1,085
1,065
1,015
1,690
1,655
1,625
1,595
1,525
2,820
2,760
2,710
2,660
2,540
4,700
4,600
4,520
4,430
4,230
8,460
8,280
8,135
7,970
7,610
850
900
950
1000
1050
65
50
35
20
20
485
450
385
365
360
975
900
775
725
720
1,460
1,350
1,160
1,090
1,080
2,435
2,245
1,930
1,820
1,800
4,060
3,745
3,220
3,030
3,000
7,305
6,740
5,795
5,450
5,400
1100
1150
1200
1250
1300
20
20
20
20
20
325
275
205
180
140
645
550
410
365
275
965
825
620
545
410
1,610
1,370
1,030
910
685
2,685
2,285
1,715
1,515
1,145
4,835
4,115
3,085
2,725
2,060
1350
1400
1450
1500
20
20
20
15
105
75
60
40
205
150
115
85
310
225
175
125
515
380
290
205
860
630
485
345
1,545
1,130
875
620
159
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-3.9
B 435 Gr. N06002 (1)
Ratings for Group 3.9 Materials (Cont’d)
B 572 Gr. N06002 (1)(2)
B 622 Gr. N06002 (1)
NOTES:
(1) Use solution annealed material only.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
B – Special Class
Working Pressures by Class, psig
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
290
275
255
750
750
750
715
665
1,500
1,500
1,500
1,425
1,330
2,250
2,250
2,250
2,140
1,995
3,750
3,750
3,750
3,565
3,320
6,250
6,250
6,250
5,940
5,535
11,250
11,250
11,250
10,690
9,965
600
650
700
750
800
240
235
230
230
225
630
615
605
595
590
1,260
1,230
1,210
1,195
1,185
1,890
1,850
1,815
1,790
1,775
3,145
3,080
3,025
2,985
2,960
5,245
5,135
5,045
4,980
4,935
9,440
9,240
9,080
8,960
8,880
850
900
950
1000
1050
225
225
180
160
160
585
580
470
420
420
1,175
1,165
945
840
840
1,760
1,745
1,415
1,260
1,260
2,935
2,905
2,360
2,105
2,105
4,890
4,845
3,930
3,505
3,505
8,800
8,720
7,070
6,310
6,310
1100
1150
1200
1250
1300
155
130
100
90
65
405
345
260
230
170
805
685
515
455
345
1,210
1,030
770
680
515
2,015
1,715
1,285
1,135
860
3,360
2,860
2,145
1,895
1,430
6,045
5,145
3,860
3,410
2,570
1350
1400
1450
1500
50
35
30
20
130
95
75
50
260
90
45
105
385
285
220
155
645
470
365
260
1,070
785
610
430
1,930
1,415
1,095
770
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°F
160
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-3.10
B 599 Gr. N08700 (1)
Ratings for Group 3.10 Materials
B 672 Gr. N08700 (1)(2)
NOTES:
(1) Use solution annealed material only.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
750
685
640
615
1,500
1,500
1,370
1,275
1,235
2,250
2,250
2,050
1,915
1,850
3,750
3,750
3,420
3,190
3,085
6,250
6,250
5,700
5,320
5,140
11,250
11,250
10,260
9,575
9,250
600
650
140
125
595
570
1,185
1,140
1,780
1,715
2,965
2,855
4,940
4,760
8,990
8,570
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
290
275
265
750
750
750
715
690
1,500
1,500
1,500
1,425
1,375
2,250
2,250
2,250
2,140
2,065
3,750
3,750
3,750
3,565
3,440
6,250
6,250
6,250
5,940
5,735
11,250
11,250
11,250
10,690
10,325
600
650
255
245
660
640
1,325
1,275
1,985
1,915
3,310
3,190
5,515
5,315
9,925
9,565
161
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-3.11
B 625 Gr. N08904 (1)
Ratings for Group 3.11 Materials
B 649 Gr. N08904 (1)(2)
B 677 Gr. N08904 (1)
NOTES:
(1) Use annealed material only.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
285
230
210
190
170
745
600
545
500
455
1,490
1,205
1,090
1,000
910
2,230
1,805
1,635
1,500
1,370
3,720
3,010
2,725
2,495
2,280
6,200
5,020
4,540
4,160
3,800
11,160
9,035
8,170
7490
6,840
600
650
700
140
125
110
425
420
410
855
835
820
1,280
1,255
1,230
2,135
2,090
2,050
3,560
3,480
3,420
6,410
6,265
6,155
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
235
215
195
750
670
610
555
510
1,500
1,345
1,215
1,115
1,020
2,250
2,015
1,825
1,670
1,525
3,750
3,360
3,040
2,785
2,545
6,250
5,605
5,065
4,645
4,240
11,250
10,085
9,120
8,355
7,635
600
650
700
185
180
175
475
465
460
955
930
915
1,430
1,400
1,375
2,385
2,330
2,290
3,975
3,885
3,815
7,150
6,990
6,870
162
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-3.12
A 351 Gr. CN3MN (1)
B 462 Gr. N08367 (1)
B 581 Gr. N06985 (1)(2)
Ratings for Group 3.12 Materials
B 582 Gr. N06985 (1)
B 620 Gr. N08320 (1)
B 621 Gr. N08320 (1)(2)
B 622 Gr. N06985 (1)
B 622 Gr. N08320 (1)
B 688 Gr. N08367 (1)
NOTES:
(1) Use solution annealed material only.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
260
240
225
200
170
670
620
585
540
500
1,345
1,245
1,165
1,075
1,000
2,015
1,865
1,750
1,615
1,500
3,360
3,110
2,915
2,690
2,495
5,600
5,180
4,860
4,480
4,160
10,080
9,325
8,750
8,065
7,490
600
650
700
750
800
140
125
110
95
80
475
460
450
440
430
945
920
900
885
865
1,420
1,380
1,355
1,325
1,295
2,365
2,305
2,255
2,210
2,160
3,940
3,840
3,760
3,680
3,600
7,090
6,910
6,770
6,625
6,480
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
265
250
230
215
750
695
650
600
555
1,500
1,390
1,300
1,200
1,115
2,250
2,080
1,955
1,800
1,670
3,750
3,470
3,255
3,000
2,785
6,250
5,780
5,425
5,000
4,645
11,250
10,405
9,765
9,000
8,355
600
650
700
750
800
200
195
195
190
185
530
515
505
495
480
1,055
1,030
1,005
985
965
1,585
1,545
1,510
1,480
1,445
2,640
2,570
2,520
2,465
2,410
4,395
4,285
4,195
4,105
4,020
7,915
7,715
7,555
7,395
7,230
163
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-3.13
B 564 Gr. N08031 (1)
B 625 Gr. N08031 (1)
Ratings for Group 3.13 Materials
B 581 Gr. N06975 (2)(3)
B 622 Gr. N08031 (1)
B 582 Gr. N06975 (2)
B 649 Gr. N08031 (1)(3)
B 622 Gr. N06975 (2)
NOTES:
(1) Use annealed material only.
(2) Use solution annealed material only.
(3) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
260
230
200
170
750
705
665
630
595
1,500
1,405
1,330
1,260
1,190
2,250
2,110
1,995
1,885
1,785
3,750
3,515
3,325
3,145
2,975
6,250
5,860
5,540
5,240
4,960
11,250
10,550
9,970
9,430
8,930
600
650
700
750
800
140
125
110
95
80
560
550
540
530
510
1,125
1,100
1,080
1,065
1,015
1,685
1,650
1,620
1,595
1,525
2,810
2,750
2,700
2,660
2,540
4,680
4,580
4,500
4,430
4,230
8,425
8,245
8,100
7,970
7,610
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
285
270
255
750
750
740
700
665
1,500
1,500
1,485
1,405
1,330
2,250
2,250
2,225
2,105
1,995
3,750
3,750
3,710
3,510
3,320
6,250
6,250
6,185
5,850
5,535
11,250
11,250
11,130
10,525
9,965
600
650
700
750
800
240
235
230
230
225
625
615
605
595
590
1,255
1,225
1,205
1,190
1,180
1,880
1,840
1,810
1,785
1,770
3,135
3,065
3,015
2,975
2,945
5,225
5,110
5,020
4,955
4,910
9,400
9,200
9,040
8,920
8,840
164
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-3.14
B 462 Gr. N06030 (1)(3)
B 581 Gr. N06007 (1)(2)
Ratings for Group 3.14 Materials
B 581 Gr. N06030 (1)(2)(3)
B 582 Gr. N06007 (1)
B 582 Gr. N06030 (1)(3)
B 622 Gr. N06007 (1)
B 622 Gr. N06030 (1)(3)
NOTES:
(1) Use solution annealed material only.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
(3) Not to be used over 800°F.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
275
250
230
200
170
720
650
600
565
540
1,440
1,295
1,200
1,130
1,075
2,160
1,945
1,800
1,690
1,615
3,600
3,240
3,000
2,820
2,690
6,000
5,400
5,000
4,700
4,480
10,800
9,720
9,000
8,460
8,065
600
650
700
750
800
140
125
110
95
80
520
510
505
500
500
1,035
1,020
1,015
1,005
1,000
1,555
1,535
1,520
1,505
1,500
2,590
2,555
2,530
2,510
2,495
4,320
4,260
4,220
4,180
4,160
7,775
7,670
7,595
7,525
7,490
850
900
950
1000
65
50
35
20
485
450
385
365
975
900
775
725
1,460
1,350
1,160
1,090
2,435
2,245
1,930
1,820
4,060
3,745
3,220
3,030
7,305
6,740
5,795
5,450
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
275
255
240
230
750
725
670
630
600
1,500
1,445
1,340
1,260
1,200
2,250
2,170
2,010
1,890
1,800
3,750
3,615
3,350
3,145
3,000
6,250
6,025
5,580
5,245
5,000
11,250
10,850
10,045
9,440
9,000
600
650
700
750
800
220
220
215
215
215
580
570
565
560
555
1,155
1,140
1,130
1,120
1,115
1,735
1,710
1,695
1,680
1,670
2,895
2,855
2,825
2,800
2,785
4,820
4,755
4,710
4,665
4,645
8,680
8,560
8,480
8,395
8,355
850
900
950
1000
210
210
180
160
555
550
470
420
1,110
1,105
945
840
1,665
1,655
1,415
1,260
2,770
2,760
2,360
2,105
4,620
4,600
3,930
3,505
8,315
8,275
7,070
6,310
165
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-3.15
B 407 Gr. N08810 (1)
A 494 Gr. N-12MV (1)(3)
Ratings for Group 3.15 Materials
B 408 Gr. N08810 (1)(2)
A 494 Gr. CW-12MW (1)(3)
B 409 Gr. N08810 (1)
B 564 Gr. N08810 (1)
NOTES:
(1) Use solution annealed material only.
(2) For forgings, the chemical composition, mechanical properties, heat treated requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerance, tests, certification, and
markings shall be in accordance with ASTM B 564.
(3) Not to be used over 1000°F.
A – Standard Class
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
230
210
200
190
170
600
550
520
490
465
1,200
1,105
1,040
980
925
1,800
1,655
1,560
1,470
1,390
3,000
2,760
2,605
2,450
2,315
5,000
4,600
4,340
4,080
3,860
9,000
8,280
7,810
7,345
6,950
600
650
700
750
800
140
125
110
95
80
440
430
420
410
400
880
860
835
820
800
1,320
1,290
1,255
1,230
1,200
2,195
2,150
2,090
2,050
2,005
3,660
3,580
3,480
3,420
3,340
6,590
6,445
6,265
6,155
6,010
850
900
950
1000
1050
65
50
35
20
20
395
385
380
365
350
785
775
760
725
700
1,180
1,160
1,140
1,090
1,050
1,970
1,930
1,895
1,820
1,750
3,280
3,220
3,160
3,030
2,915
5,905
5,795
5,690
5,450
5,245
1100
1150
1200
1250
1300
20
20
20
20
20
325
275
205
180
140
645
550
410
365
275
965
825
620
545
410
1,610
1,370
1,030
910
685
2,685
2,285
1,715
1,515
1,145
4,835
4,115
3,085
2,725
2,060
1350
1400
1450
1500
20
20
20
15
105
75
60
40
205
150
115
85
310
225
175
125
515
380
290
205
860
630
485
345
1,545
1,130
875
620
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
166
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-3.15
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
B 407 Gr. N08810 (1)
A 494 Gr. N-12MV (1)(3)
Ratings for Group 3.15 Materials (Cont’d)
B 408 Gr. N08810 (2)
A 494 Gr. CW-12MW (1)(3)
B 409 Gr. N08810 (1)
B 564 Gr. N08810 (1)
NOTES:
(1) Use solution annealed material only.
(2) For forgings, the chemical composition, mechanical properties, heat treated requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerance, tests, certification, and
markings shall be in accordance with ASTM B 564.
(3) Not to be used over 1000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
255
235
225
210
200
670
615
580
545
515
1,340
1,230
1,165
1,095
1,035
2,010
1,850
1,745
1,640
1,550
3,350
3,080
2,905
2,730
2,585
5,580
5,135
4,845
4,555
4,310
10,045
9,040
8,720
8,195
7,755
600
650
700
750
800
190
185
180
175
170
490
480
465
460
445
980
960
930
915
895
1,470
1,440
1,400
1,375
1,340
2,450
2,395
2,330
2,290
2,235
4,085
3,995
3,885
3,815
3,730
7,355
7,190
6,990
6,870
6,710
850
900
950
1000
1050
170
165
160
160
160
440
430
425
415
415
880
865
845
830
830
1,320
1,295
1,270
1,245
1,245
2,195
2,155
2,115
2,075
2,075
3,660
3,595
3,525
3,460
3,460
6,590
6,470
6,350
6,230
6,230
1100
1150
1200
1250
1300
155
130
100
90
65
405
345
260
230
170
805
685
515
455
345
1,210
1,030
770
680
515
2,015
1,715
1,285
1,135
860
3,360
2,860
2,145
1,895
1,430
6,045
5,145
3,860
3,410
2,570
1350
1400
1450
1500
50
35
30
20
130
95
75
50
260
190
145
105
385
285
220
155
645
470
365
260
1,070
785
610
430
1,930
1,415
1,095
770
167
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-3.16
B 511 Gr. N08330 (1)(2)
Ratings for Group 3.16 Materials
B 535 Gr. N08330 (1)
B 536 Gr. N08330 (1)
NOTES:
(1) Use solution annealed material only.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
275
245
225
200
170
720
635
595
555
530
1,440
1,270
1,185
1,115
1,055
2,160
1,910
1,780
1,670
1,585
3,600
3,180
2,965
2,785
2,640
6,000
5,300
4,940
4,640
4,400
10,800
9,540
8,890
8,350
7,920
600
650
700
750
800
140
125
110
95
80
505
495
480
475
465
1,010
990
965
945
925
1,510
1,485
1,445
1,420
1,390
2,520
2,470
2,410
2,365
2,315
4,200
4,120
4,020
3,940
3,860
7,560
7,415
7,235
7,090
6,950
850
900
950
1000
1050
65
50
35
20
20
455
445
385
365
345
905
890
775
725
685
1,360
1,330
1,160
1,090
1,030
2,270
2,220
1,930
1,820
1,715
3,780
3,700
3,220
3,030
2,855
6,805
6,660
5,795
5,450
5,145
1100
1150
1200
1250
1300
20
20
20
20
20
265
205
160
130
105
535
410
320
260
215
800
615
485
390
320
1,335
1,030
805
650
530
2,230
1,715
1,345
1,085
885
4,010
3,085
2,415
1,955
1,595
1350
1400
1450
1500
20
20
20
15
80
60
50
40
165
125
105
75
245
185
155
115
410
310
255
190
685
515
430
315
1,235
925
770
565
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
GENERAL NOTE:
(a) Flanged end valve ratings terminate at 1000°F.
168
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-3.16
B 511 Gr. N08330 (1)(2)
Ratings for Group 3.16 Materials (Cont’d)
B 535 Gr. N08330 (1)
B 536 Gr. N08330 (1)
NOTES:
(1) Use solution annealed material only.
(2) For forgings, the chemical composition, mechanical properties, heat treating requirements, and grain size requirements
shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and
markings shall be in accordance with ASTM B 564.
B – Special Class
Working Pressures by Class, psig
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
270
255
240
225
750
710
660
620
590
1,500
1,420
1,325
1,245
1,180
2,250
2,130
1,985
1,865
1,770
3,750
3,550
3,310
3,105
2,945
6,250
5,915
5,515
5,180
4,910
11,250
10,645
9,925
9,320
8,840
600
650
700
750
800
215
210
205
200
200
565
550
540
530
515
1,125
1,105
1,075
1,055
1,035
1,690
1,655
1,615
1,585
1,550
2,815
2,760
2,690
2,640
2,585
4,690
4,600
4,485
4,395
4,310
8,440
8,275
8,075
7,915
7,755
850
900
950
1000
1050
195
190
180
160
160
505
495
470
420
420
1,015
990
945
840
840
1,520
1,485
1,415
1,260
1,260
2,530
2,480
2,360
2,105
2,015
4,220
4,130
3,930
3,505
3,305
7,595
7,435
7,070
6,310
6,310
1100
1150
1200
1250
1300
130
100
75
60
50
335
255
120
165
135
670
515
405
325
265
1,005
770
605
490
400
1,670
1,285
1,005
815
665
2,785
2,145
1,680
1,355
1,105
5,015
3,855
3,020
2,445
1,995
1350
1400
1450
1500
40
30
25
20
105
75
65
45
205
155
130
95
310
230
195
140
515
385
320
235
855
645
535
395
1,545
1,155
965
705
169
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VII
Table VII-2-3.17
Ratings for Group 3.17 Materials
A 351 Gr. CN7M (1)
NOTE:
(1) Use solution annealed material only.
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
230
200
180
160
150
600
520
465
420
390
1,200
1,035
930
845
780
1,800
1,555
1,395
1,265
1,165
3,000
2,590
2,330
2,110
1,945
5,000
4,320
3,880
3,520
3,240
9,000
7,775
6,985
6,335
5,830
600
140
360
720
1,080
1,800
3,000
5,400
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
255
215
195
180
165
665
560
510
470
435
1,330
1,125
1,020
945
870
1,995
1,685
1,535
1,415
1,300
3,320
2,805
2,550
2,355
2,170
5,535
4,680
4,260
3,930
3,615
9,965
8,420
7,665
7,070
6,510
600
155
400
805
1,205
2,010
3,350
6,025
170
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
MANDATORY APPENDIX VII
ASME B16.34-2004
Table VII-2-3.18
Ratings for Group 3.18 Materials
B 167 Gr. N06600 (1)
NOTE:
(1) Only use annealed material.
A – Standard Class
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
275
260
230
200
170
720
685
660
630
605
1,440
1,375
1,315
1,260
1,210
2,160
2,060
1,975
1,885
1,815
3,600
3,430
3,290
3,145
3,025
6,000
5,720
5,480
5,240
5,040
10,800
10,295
9,865
9,430
9,070
600
650
700
750
800
140
125
110
95
80
585
575
565
530
510
1,165
1,145
1,130
1,065
1,015
1,750
1,720
1,690
1,595
1,525
2,915
2,870
2,820
2,660
2,540
4,860
4,780
4,700
4,430
4,230
8,750
8,605
8,460
7,970
7,610
850
900
950
1000
1,050
65
50
35
20
20
485
450
365
240
155
975
900
725
480
310
1,460
1,350
1,090
720
465
2,435
2,245
1,815
1,200
770
4,060
3,745
3,030
2,000
1,285
7,305
6,740
5,450
3,600
2,315
1,100
1,150
1,200
20
20
20
105
75
70
205
150
135
310
225
205
515
375
345
855
630
570
1,545
1,130
1,030
GENERAL NOTE:
Flanged end valve ratings terminate at 1000°F.
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
290
290
280
270
260
750
750
735
700
675
1,500
1,500
1,470
1,405
1,350
2,250
2,250
2,200
2,105
2,025
3,750
3,750
3,670
3,510
3,375
6,250
6,250
6,115
5,850
5,625
11,250
11,250
11,010
10,525
10,125
600
650
700
750
800
250
245
240
240
235
650
640
630
620
615
1,300
1,280
1,260
1,245
1,225
1,955
1,920
1,890
1,865
1,840
3,255
3,200
3,145
3,105
3,065
5,425
5,335
5,245
5,180
5,110
9,765
9,605
9,440
9,320
9,200
850
900
950
1,000
1,050
230
230
175
115
75
605
595
455
300
195
1,210
1,195
910
600
385
1,815
1,790
1,365
900
580
3,025
2,985
2,270
1,500
965
5,045
4,980
3,785
2,500
1,605
9,080
8,960
6,815
4,500
2,895
1,100
1,150
1,200
50
35
35
130
95
85
255
190
170
385
285
255
645
470
430
1,070
785
715
1,930
1,415
1,285
171
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
MANDATORY APPENDIX VIII
REFERENCE STANDARDS AND SPECIFICATIONS
API-598-1996, Valve Inspection and Test
Publisher: American Petroleum Institute (API), 1220 L
Street NW, Washington, D.C. 20005
ASME B1.1-1989 (R2001), Unified Inch Screw Threads
(UN and UNR Thread Form)
ANSI B1.20.1-1983 (R2001), Pipe Threads, General Purpose (Inch)
ASME B16.5-2002, Flanges and Flanged Fittings
ASME B16.10-2001, Face-to-Face and End-to-End
Dimensions of Ferrous Valves
ASME B16.11-2001, Forged Steel Fittings, Socket-Welding and Threaded
ASME B16.20-2000, Ring-Joint Gaskets and Grooves for
Steel Pipe Flanges
ASME B16.21-1992, Nonmetallic Flat Gaskets for Pipe
Flanges
ASME B16.25-1997, Buttwelding Ends
ASME B18.2.1-1996), Square and Hex Bolts and
Screws — Inch Series
ANSI B18.2.2-1987 (R1999), Square and Hex Nuts
ASME B31.3-2002, Chemical Plant and Petroleum Refinery Piping
ASME B36.10M-2001, Welded and Seamless Wrought
Steel Pipe
ASME PCC-1-2000, Guidelines for Pressure Boundary
Bolted Flange Joint Assembly
ASME Boiler and Pressure Vessel Code, Section I, Power
Boilers
ASME Boiler and Pressure Vessel Code, Section III, Rules
for Construction of Nuclear Power Plant Components,
Division 1
ASME Boiler and Pressure Vessel Code, Section VIII,
Pressure Vessels — Divisions 1 and 2
ASME Boiler and Pressure Vessel Code, Section IX,
Welding and Brazing Qualifications
ASTM A 515-01, Carbon Steel Plates, High Temperature
ASTM A 516-01, Carbon Steel Plates, Low Temperature
ASTM A 537-95 (2000), Carbon-Manganese-Silicon Steel
Plates
ASTM A 540-00, Alloy Steel Bolting, Special
ASTM A 609-91 (R2002) , Longitudinal-Beam Ultrasonic
Inspection for Carbon and Low-Alloy Steel Castings
ASTM A 617-94, Electric-Fusion Welded Steel Pipe —
replaced by A996-2001a
Publisher: The American Society of Mechanical Engineers (ASME), Three Park Avenue, New York, New
York 10016-5990; Order Department: 22 Law Drive,
Box 2300, Fairfield, NJ 07007-2300
172
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
ASTM A 105-01, Carbon Steel Forgings
ASTM A 106-99e1, Seamless Carbon Steel Pipe
ASTM A 182-01e1, Alloy Steel Forged or Rolled Parts
ASTM A 193-01b, Alloy Steel Bolting
ASTM A 194-01a, Carbon and Alloy Steel Nuts
ASTM A 203-97, Nickel Alloy Steel Plates
ASTM A 207-74a, Carbon-Moly Steel Plates — discontinued 1972
ASTM A 216-93 (1998), Carbon Steel Castings
ASTM A 217-02, Alloy Steel Castings
ASTM A 240-02, Stainless Steel Plate
ASTM A 275-98, Magnetic Particle Examination of Steel
Forgings
ASTM A 302-97e1, Pressure Vessel Plates, Carbon Steel,
Manganese-Molybdenum and Manganese-Molybdenum-Nickel
ASTM A 307-00, Carbon Steel Bolting
ASTM A 312-01a, Stainless Steel Pipe, Seamless or
Welded
ASTM A 320-01, Low-Temperature Alloy Bolting
ASTM A 335-01, Seamless Ferritic Alloy Steel Pipe
ASTM A 350-00c, Low-Temperature Alloy Steel Forged
or Rolled Parts
ASTM A 351-00, Stainless Steel Castings
ASTM A 352-93 (1998), Low-Temperature Carbon and
Alloy Steel Castings
ASTM A 354-01, Q & T Alloy Bolting
ASTM A 358-01, Electric Fusion-Welded Stainless
Steel Pipe
ASTM A 369-02, Ferritic Alloy Forged or Bored Pipe
ASTM A 387-99e1, Alloy Steel Plates
ASTM A 388-01, Ultrasonic Examination of Heavy Steel
Forgings
ASTM A 430-91, Stainless Steel Forged or Bored Pipe —
replaced by A312-2001a
ASTM A 453-00e1, Alloy Steel Bolting
ASTM A 479-02, Alloy Steel Bars and Shapes
ASTM A 488-01e1, Qualification of Procedures for Welding Castings
ASTM A 494-01ae1, Nickel and Nickel Alloy Castings
Standards and specifications referenced in this Standard are listed showing the year of approved issue.
Products covered by each ASTM specification are listed
for convenience. (See specifications for exact titles and
detailed contents.)
MANDATORY APPENDIX VIII
ASME B16.34-2004
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
ASTM A 672-96, Electric-Fusion Welded Steel Pipe
ASTM A 675-90a (R2000), Carbon Steel Bars
ASTM A 691-98, Carbon & Alloy Steel Pipe — ElectricFusion Welded
ASTM A 696-90a (R2000), Carbon Steel Bars
ASTM A 739-90a (R2000), Alloy Steel Bars
ASTM A 789-01a, Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
ASTM A 790-01, Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
ASTM B 407-01, Standard Specification for Nickel-IronChromium Alloy Seamless Pipe and Tube
ASTM B 408-01, Standard Specification for Nickel-IronChromium Alloy Rod and Bar
ASTM B 409-01, Standard Specification for Nickel-IronChromium Alloy Plate, Sheet, and Strip
ASTM B 424-98a, Nickel-Iron-Chromium-MolybdenumCopper Alloy Plate Sheet and Strip
ASTM B 425-99, Nickel-Iron-Chromium-MolybdenumCopper Alloy Rod and Bar
ASTM B 434-00, Nickel-Molybdenum-Copper Iron
Plate, Sheet and Strip
ASTM B 435-99a, Nickel-Chromium-Molybdenum-Iron
Alloy Plate, Sheet and Strip
ASTM B 443-00e1, Nickel-Chromium-MolybdenumColumbium Alloy Plate, Sheet and Strip
ASTM B 446-00e1, Nickel-Chromium-MolybdenumColumbium Alloy Rod and Bar
ASTM B 462-00a, Chromium-Nickel-Iron-MolybdenumCopper Columbium Forgings
ASTM B 463-99, Chromium-Nickel-Iron-MolybdenumCopper Columbium Plate, Sheet and Strip
ASTM B 473-96, Chromium-Nickel-Iron-MolybdenumCopper Columbium Bar
ASTM B 511-01, Nickel-Iron-Chromium-Silicon Alloy
Bars and Shapes
ASTM B 536-95, Nickel-Iron-Chromium-Silicon Alloy
Plate, Sheet and Strip
ASTM B 564-00a, Nickel Alloy Forgings
ASTM B 572-98a, Nickel-Chromium-Molybdenum-Iron
Alloy Rod
ASTM B 573-00, Nickel-Molybdenum-Chromium-Iron
Alloy Rod
ASTM B 574-99a, Low-Carbon Nickel-MolybdenumChromium Alloy Rod
ASTM B 575-99a, Low-Carbon Nickel-MolybdenumChromium Alloy Plate, Sheet and Strip
ASTM B 581-97, Nickel-Chromium-Iron-MolybdenumCopper Alloy Rod
ASTM B 582-97, Nickel-Chromium-Iron-MolybdenumCopper Alloy Plate, Sheet and Strip
ASTM B 599-92 (R1997), Nickel-Iron-Chromium-Molybdenum-Columbium Alloy Plate Sheet and Strip
ASTM B 620-98a, Nickel-Iron-Chromium-MolybdenumAlloy Plate, Sheet and Strip
ASTM B 621-95a, Nickel-Iron-Chromium-MolybdenumAlloy Rod
ASTM B 622-00, Seamless Nickel and Nickel-Cobalt
Alloy Pipe and Tube
ASTM B 625-99, Nickel-Iron-Chromium-MolybdenumCopper-Low-Carbon Alloy Plate, Sheet and Strip
ASTM B 649-95, Nickel-Iron-Chromium-MolybdenumCopper Low-Carbon Alloy Bar and Wire
ASTM B 672-95, Nickel-Iron-Chromium-MolybdenumColumbium Alloy Bar and WireASTM E 94-93, Radiographic Test
ASTM E 709-01, Standard Recommended Practice for
Magnetic Particle Examination
ASTM E 142-92, Controlling Quality of Radiographic
Testing — replaced by E94-2000
ASTM E 165-02, Liquid Penetrant Inspection Method
ASTM E 186 98, Reference Radiographs for HeavyWalled (2 to 41⁄2 in.) Steel Castings
ASTM E 280-98, Reference Radiographs for HeavyWalled (41⁄2 to 12 in.) Steel Castings
ASTM E 446-98, Standard Reference Radiographs for
Steel Castings up to 2 in. in Thickness
Publisher: American Society for Testing and Materials
(ASTM), 100 Barr Harbor Drive, West Conshohocken,
PA 19428-2959
SP 9-2001, Spot-Facing for Bronze, Iron, and Steel
Flanges
SP 25-1998, Standard Marking Systems for Valves, Fittings, Flanges, and Unions
SP 45-1998, Bypass and Drain Connection Standard
SP 61-1999, Hydrostatic Testing of Steel Valves
SP 55-2001, Quality Standard for Steel Castings
Publisher: Manufacturer’s Standardization Society of
the Valves and Fittings Industry (MSS), 127 Park Street
NE, Vienna, VA 22180-4602
ISO 9000-2000, Quality Management Systems — Fundamentals and Vocabulary
ISO 9001-2000, Quality Management Systems —
Requirements
ISO 9004-2000, Quality Management Systems — Guidelines for Performance Improvement
Publisher: International Organization for Standardization (ISO), rue de Varembé, Case Postale 56, CH - 1211,
Genève 20, Switzerland/Suisse
ISO documents are also available from ANSI. Publications appearing below which have been approved as
American National Standards may also be obtained
from:
American National Standards Institute (ANSI), 25 West
43rd Street, New York, NY 10036
173
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
NONMANDATORY APPENDIX A
RELATIONSHIP BETWEEN NOMINAL PIPE SIZE AND
INSIDE DIAMETER
The relationship between wall thickness and inside
diameter shown in Table 3 is the basis for pressure rating
of valves. By interpolation, a definitive design can be
determined for any pressure-diameter-material combination.
Following the evolution of standard dimensions for
flanges in a series of rating classes, corresponding standard relationships were established between nominal
pipe sizes and the inside diameter of fittings matching
the rating class of the flanges. These provided a useful
design basis for the corresponding flanged end valves,
subsequently extended in application to welding end
valves, which in many cases are identical except for the
pipe ends. Table A-1 is based on the dimensions given in
B16.5 dimensional tables as “Inside Diameter of Fitting.”
The values for sizes greater than NPS 24 for the lower
pressure classes and greater than NPS 12 for Class 2500
were obtained by linear extrapolation.
174
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
NONMANDATORY APPENDIX A
ASME B16.34-2004
Table A-1
Class 150
NPS
Class 300
Inside Diameter, d
Class 600
Class 900
Class 1500
Class 2500
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
DN
⁄2
⁄4
1
11⁄4
11⁄2
12.7
19.1
25.4
31.8
38.1
0.50
0.75
1.00
1.25
1.50
12.7
19.1
25.4
31.8
38.1
0.50
0.75
1.00
1.25
1.50
12.7
19.1
25.4
31.8
38.1
0.50
0.75
1.00
1.25
1.50
12.7
17.5
22.1
28.4
34.8
0.50
0.69
0.87
1.12
1.37
12.7
17.5
22.1
28.4
34.8
0.50
0.69
0.87
1.12
1.37
11.2
14.2
19.1
25.4
28.4
0.44
0.56
0.75
1.00
1.12
15
20
25
32
40
2
21⁄2
3
4
5
50.8
63.5
76.2
101.6
127.0
2.00
2.50
3.00
4.00
5.00
50.8
63.5
76.2
101.6
127.0
2.00
2.50
3.00
4.00
5.00
50.8
63.5
76.2
101.6
127.0
2.00
2.50
3.00
4.00
5.00
47.5
57.2
72.9
98.3
120.7
1.87
2.25
2.87
3.87
4.75
47.5
57.2
69.9
91.9
111.0
1.87
2.25
2.75
3.62
4.37
38.1
47.5
57.2
72.9
91.9
1.50
1.87
2.25
2.87
3.62
50
65
80
100
125
6
8
10
12
14
152.4
203.2
254.0
304.8
336.6
6.00
8.00
10.00
12.00
13.25
152.4
203.2
254.0
304.8
336.6
6.00
8.00
10.00
12.00
13.25
152.4
199.9
247.7
298.5
326.9
6.00
7.87
9.75
11.75
12.87
146.1
190.5
238.0
282.4
311.2
5.75
7.50
9.37
11.12
12.25
136.4
177.8
222.3
263.4
288.8
5.37
7.00
8.75
10.37
11.37
111.0
146.1
184.2
218.9
241.3
4.37
5.75
7.25
8.62
9.50
150
200
250
300
350
16
18
20
22
24
387.4
438.2
489.0
539.8
590.6
15.25
17.25
19.25
21.25
23.25
387.4
431.8
482.6
533.4
584.2
15.25
17.00
19.00
21.00
23.00
374.7
419.1
463.6
511.0
558.8
14.75
16.50
18.25
20.12
22.00
355.6
400.1
444.5
489.0
533.4
14.00
15.75
17.50
19.25
21.00
330.2
371.3
415.8
457.2
498.3
13.00
14.62
16.37
18.00
19.62
276.1
311.2
342.9
377.7
412.8
10.87
12.25
13.50
14.87
16.25
400
450
500
550
600
26
28
30
641.4
692.2
743.0
25.25
27.25
29.25
635.0
685.8
736.6
25.00
27.00
29.00
603.3
647.7
695.2
23.75
25.50
27.37
577.9
622.3
666.8
22.75
24.50
26.25
539.8
584.2
625.3
21.25
23.00
24.62
447.5
482.6
517.4
17.62
19.00
20.37
650
700
750
1
3
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
175
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
NONMANDATORY APPENDIX B
METHOD USED FOR
ESTABLISHING PRESSURE-TEMPERATURE RATINGS
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
B-1 GENERAL CONSIDERATIONS
The equation does not apply for values of Pc greater
than 4,500. The resultant units for t will be the same as
those used to express d.
B-1.1 Introduction
Pressure-temperature ratings for this Standard have
been determined by the procedures described in this
Appendix. The method is general and considers dimensions of this and related standards.1 Valve performance
is related to stress and deformation. Valves require special consideration since they are mechanically operated
devices that must be able to provide partial or complete
restriction to fluid flow under a wide variety of conditions.
B-1.4 Additional Considerations
The equation in para. B-1.3 results in a wall thickness
of 50% greater for Class 150 to 2500 and approximately
35% greater for Class 4500 than for a simple cylinder
designed for a stress of 48.28 MPa (7000 psi) subjected
to an internal pressure equal to the pressure rating class
designation, Pc. The actual values in Table 3 are approximately 2.5 mm (0.1 in.) larger than those given by the
equation. Additional metal thickness, particularly for
ratings over Class 2500, needed for assembly stress,
valve closing stresses, shapes other than circular, and
stress concentrations must be determined by individual
manufacturers, since these factors vary widely.
B-1.2 Materials
It is not required that identical materials be used for
a valve body and bonnet or a valve body and cover.
However, both shall be from materials listed in Table 1.
The assigned pressure rating shall be based on the valve
body. The bonnet or cover shall be designed and the
material selected accordingly. Selection of material for
and the design of stems, discs, and other parts, such as
bonnet gaskets and bolting, subject to pressure loading,
shall be consistent with the pressure-temperature rating.
B-1.5 Material Properties
The pressure-temperature rating method uses allowable stresses, ultimate strengths, and yield strengths
from referenced ASME Boiler and Pressure Vessel Code
Sections. For materials listed herein that have ratings
either at temperature values that are above those shown
in a referenced Code section or that are not listed in any
of the referenced Code sections, the allowable stress,
ultimate strength, and yield strength data have been
provided directly by the ASME Boiler and Pressure Vessel Subcommittee on Materials.
B-1.3 Wall Thickness
Wall thickness requirements for valve bodies are specified in para. 6.1. The minimum wall thickness values,
tm, shown in Table 3 or calculated using the equation
of Mandatory Appendix VI are all greater than those
determined by the following equation.
t p 1.5
冤
Pc d
2SF – 1.2Pc
冥
B-1.6 Material Groups
Materials are grouped in Table 1 based on identical
or closely matched allowable stress and yield strength
values. When these values are not identical for each
material listed, the lowest value has been used.
(1)
where:
t p calculated thickness
Pc p pressure class designation number, e.g., for
Class 150, Pc p 150; for Class 300, Pc p 300
d p inside diameter or port opening as defined in
para. 6.1.2, (see Table 3 and Nonmandatory
Appendix A)
SF p stress based constant equal to 7,000
B-2 STANDARD CLASS RATING METHOD
B-2.1 Method for Group 1 Materials
Pressure-temperature ratings for Standard Class
valves, Class 300 and higher, of materials listed in Materials Group 1 of Table 1, were established by the equation
pst p
C 1S 1
P ≤ pca
8750 r
1
This method is appropriate for materials listed in Table 1 of
this Standard. It may not be appropriate for other materials.
where
176
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
(2)
NONMANDATORY APPENDIX B
ASME B16.34-2004
Part D, for Section III, Class 2 or Class 3 values
may only be used for a material not listed for
either Section I or Section VIII, Division 1.
pst p Standard Class rated working pressure, bar,
(psi) for the specified material at temperature T
pca p ceiling pressure, bar, (psi), at temperature T as
specified in para. B-4 for Standard Class
Pr p pressure class rating index. For designations
Class 300 and above, Pr is equal to the class
designation number, e.g., for Class 300, Pr p
300. For Class 150 and for the interpolation
method required for rating designations
between Class 150 and 300, see para. B-2.3.
C1 p 10 when S1 is expressed in MPa units, the resultant pst will be in bar units (C1 p 1 when S1 is
expressed in psi units, the resultant pst will be
in psi units)
S1 p selected stress, MPa (psi) for the specified
material at temperature T. The value of S1 shall
be established as follows:
(a) At temperatures below the creep range,
Sl shall be equal to or less than 60% of the yield
strength at temperature T, but shall not exceed:
(1) 60% of the specified minimum yield
strength at 38°C (100°F)
(2) 1.25 times 25% of the ultimate tensile
strength at temperature T
(b) At temperatures in the creep range, the
value of S1 shall be the allowable stress at temperature T, as listed in ASME Boiler and Pressure Vessel Code, Section II, Part D, for either
Section I or Section VIII, Division 1; but not
exceeding 60% of the listed yield strength at
temperature.
(c) In no case shall the selected stress value
increase with increasing temperature.
(d) The creep range is considered to be at
temperatures in excess of 370°C (700°F) for
Group 1 materials.
(e) When the allowable stresses listed for the
referenced ASME Boiler and Pressure Vessel
Code Section show a higher and lower value
for allowable stress and the higher value is
noted to the effect that these stress values
exceed two-thirds of the yield strength at temperature, then the lower value shall be used.
If lower allowable stress values do not appear
and it is noted in the allowable stress table that
the allowable stress values exceed two-thirds
of the yield strength at temperature, then the
allowable stress values to be used shall be
determined as two-thirds of the tabulated
yield strength at temperature.
(f ) Ultimate tensile strength and yield
strength values shall be as listed in ASME
Boiler and Pressure Vessel Code, Section II,
Part D.
(g) Allowable stress values listed in ASME
Boiler and Pressure Vessel Code, Section II,
B-2.2 Method for Groups 2 and 3 Materials
Pressure-temperature ratings for Standard Class
valves, Class 300 and higher, of materials corresponding
to those in Materials Groups 2 and 3 of Table 1 are
established by the method of para. B-2.1, except that
in paras. B-2.1(a) and B-2.1(a)(1), 60% factor shall be
changed to 70%, and, for Group 2 materials, the creep
range is considered to be at temperatures in excess of
510°C (950°F) unless the material properties indicate
lower temperatures should be used. For Group 3 materials, the creep temperature onset for B-2.1(d) shall be
determined on an individual basis.
B-2.3 Method for Class 150 — All Materials
Pressure–temperature ratings for Standard Class
valves, Class 150 rating designation, are established by
the method given for the related materials in paras. B2.1 and B-2.2, subject to the following exceptions:
(a) The value of Pr, the pressure class rating index in
Eq. (2), for Class 150 shall be 115. For a rating designation
between Class 150 and Class 300, an interpolation shall
be made using Pr p 115 psi for Class 150
(b) The value for S1, the selected stress MPa (psi),
for the specific material at temperature T, shall be in
accordance with the requirements stated in either para.
B-2.1 or B-2.2
(c) The value of pst, the rated working pressure, bar
(psi), for Class 150, shall not exceed values at temperature, T, as given by Eq. (3)
pst ≤ C2 – C3T
where:
T p material temperature, °C (°F)
C2 p 21.41 and C3 p 0.03724 with T expressed in °C,
the resultant pst will be in bar units
(C2 p 320 and C3 p 0.3 with T expressed in °F,
the resultant pst will be in psi units).
The value of T in Eq. (3) shall not exceed 540°C
(1000°F). For values of T less than 38°C (100°F), use T
equal to 38°C (100°F) in Eq. (3).
B-3 SPECIAL CLASS RATING METHOD
Pressure–temperature ratings for Special Class valves
(see para. 2.1.2) are established for all materials of Table
1 by the equation
psp p
C2S2
P ≤ pcb
7000 r
where
177
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
(3)
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
(4)
ASME B16.34-2004
NONMANDATORY APPENDIX B
psp p Special Class rated working pressure, bar (psi),
for the specified material at temperature T
pcb p ceiling pressure, bar (psi), at temperature T as
specified in para. B-4 for Special Class
Pr p pressure class rating index. For all designations Class 300 and above, Pr is equal to the
class designation number, e.g, for Class 300,
Pr p 300. For Class 150, Pr p 115. For a pressure class designation between Class 150 and
Class 300, the interpolation for the rated working pressures shall be made using Pr p 115
for Class 150.
C2 p 10 when S2 is expressed in MPa units, the resultant psp will be in bar units. (C2 p 1 when S2
is expressed in psi units, the resultant psp will
be in psi units.)
S2 p selected stress for the specified material at temperature T, MPa (psi). The value of S2 shall be
established as follows:
(a) At temperatures below the creep range,
S2 shall be equal to or less than 62.5% of the
yield strength at temperature T, but shall not
exceed:
(1) 62.5% of the specified minimum yield
strength at 38°C (100°F)
(2) 25% of the ultimate tensile stress value
at temperature T.
(b) At temperatures in the creep range, the
value of S2 shall be the allowable stress at temperature T, as listed in ASME Boiler and Pressure Vessel Code, Section II, Part D, for either
Section I or Section VIII, Division 1; but not
exceeding 62.5% of the yield strength at temperature T.
(c) In no case shall the selected stress value
increase with increasing temperature.
(d) The creep range is to be considered that
at temperatures in excess of 370°C (700°F) for
Group 1 materials and 510°C (950°F) for Group
2 materials, unless material properties indicate
lower temperatures to be used. For Group 3
materials, the creep range temperature limits
shall be determined on an individual basis.
(e) When the allowable stresses listed for the
referenced ASME Boiler and Pressure Vessel
Code Section show a higher and a lower value
for allowable stress and the higher value is
noted to the effect that these stress values
exceed two-thirds of the yield strength at temperature, then the lower value shall be used.
If lower allowable stress values do not appear
and it is noted in the ASME Boiler and Pressure
Vessel Code, Section II, Part D allowable stress
table that the allowable stress values exceed
two-thirds of the yield strength at temperature,
then the allowable stress values shall be determined as the lesser of two-thirds of the tabulated yield strength or the listed allowable
stress at temperature.
(f) Ultimate tensile and yield strength values shall be as listed in ASME Boiler and Pressure Vessel Code, Section II, Part D.
(g) Allowable stress values listed in ASME
Boiler and Pressure Vessel Code, Section II,
Part D, for Section III, Class 2 or Class 3 values
only, may be used for a material not listed for
either Section I or Section VIII, Division 1.
B-4 MAXIMUM RATINGS
The rules for establishing Standard Class and Special
Class pressure–temperature ratings include consideration of ceiling pressures, Pca or Pcb, that effectively sets
limits on the selected stress. The ceiling pressure–temperature values set an upper bound for high strength
materials and are imposed to limit deflection. By definition, ceiling pressure values also apply to intermediate
ratings (para. 2.1.5). Ceiling pressure values are listed
in Table B-3. Except for Limited Class, ratings in excess
of these are not permitted under this Standard.
B-5 INTERMEDIATE RATING CLASS METHOD
B-5.1 Conception
Welding end or threaded end valves may be designed
for an Intermediate Pressure Class designation. In this case
it is necessary to perform multiple linear interpolation
using the data in Tables 2 and 3 in order to determine
the intermediate pressure class designation, the intermediate pressure-temperature ratings, and the associated
minimum wall thickness. Given at the start is the material identification, the intermediate working pressure,
and its associated temperature.
B-5.2 Nomenclature
Definitions for paras. B-5.3 and B-5.4 are as follows:
dI p a given inside diameter, reference para. 6.1.2
Pc p pressure class designation, reference B-1.3
Pcl p the calculated intermediate pressure class designation for pI at TI
Pr p pressure class rating index, reference para. B-2.1
PrI p the calculated intermediate pressure class rating index for pI at TI
pI p a given intermediate working pressure at TI
TI p a given temperature associated with pI
tI p the calculated required minimum wall thickness for PcI
B-5-3 Interpolation for Intermediate Pressure Ratings
Given pI at TI and the valve material, refer to the
applicable Table for the pressure-temperature rating tabulation. For the given TI, locate Ta and Tb, the temperatures above and below TI. For the given pI, locate paL
178
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
NONMANDATORY APPENDIX B
Table B-1
ASME B16.34-2004
Pressure-Temperature Matrix
Class-Diameter Matrix
Table B-2
T
PrL
PrI
PrH
d
PcL
Ta
paL
paI
paH
da
taL
TI
pIL
pI
pIH
dI
tIL
Tb
pbL
pbI
pbH
db
tbL
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
and paH and also pbL and pbH the bounding pressures
lower and higher than pI. These are identified with pressure class rating indices PrL and PrH. These are shown
schematically in Table B-1.
(a) Interpolate to find intermediate pressures, pIL and
pIH at intermediate temperature, TI.
冢T – T 冣
pIL p paL – 共paL – pbL兲
Ta – TI
a
冢
冣
冢p
pI – pIL
IH – pIL
冣
冢P
冣
PcH – PcL
rH – PrL
tI
tIH
tbH
冢P
PrI – PrL
rH – PrL
(9)
B-5.4 Wall Thickness for Intermediate Ratings
Given the valve inside diameter, d, (para. 6.1.2) and
the calculated intermediate pressure class designation,
PcI, [para. B-5.3(c)] refer to Table 3 for the minimum wall
thickness tabulation. For the given inside diameter, dI,
locate da and db, the diameters above and below dI. For
the given PcI, locate PcL and PcH, the pressure class designation lower and higher than PcI. The bounding minimum wall thickness is at the row-column intersection
as shown schematically in Table B-2.
(a) Interpolate to find intermediate minimum wall
thicknesses, tIL and tIH, at intermediate diameter, dI.
(6)
(7)
冢d – d 冣
tIL p taL + 共tbL – taL兲
(8)
Note that for Pcl ≥ 300, Pcl p Prl.
tIH p taH + 共tbH – taH兲
(d) Interpolate to find intermediate working pressures as temperature over the associated service temperature range applicable for P rI . This interpolation is
specifically required for the pressure rating at 38°C
(100°F) that is needed for setting the hydrostatic test
dI – da
b
dI – da
b
(10)
a
冢d – d 冣
(11)
a
(b) Interpolate to find the intermediate minimum wall
thickness, (tI).
冢P
tI p tIL + 共tIH – tIL兲
PcI – PcL
cH – PcL
179
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
冣
(5)
(c) Interpolate to find the intermediate pressure class
designation, PcI.
PcI p PcL + 共PrI – PrL兲
taH
PaI p PaL + 共PaH – PaL兲
(b) Interpolate to find the intermediate pressure class
rating index, PrI.
PrI p PrL + 共PrH – PrL兲
PcH
pressure and to meet the marking requirements and
for setting the pressure associated with any maximum
limiting temperature. For example, for T p Ta, the interpolated working pressure rating is
b
Ta – TI
pIH p paH – 共paH – pbH兲
Ta – Tb
PcI
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
冣
(12)
ASME B16.34-2004
NONMANDATORY APPENDIX B
Table B-3
Pressure Rating Ceiling Values
A – Standard Class
Working Pressures by Class, bar
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
200
250
300
325
350
375
400
425
450
475
500
525
538
550
575
600
625
650
675
700
725
750
775
800
816
20.0
19.5
17.7
15.8
13.8
12.1
10.2
9.3
8.4
7.4
6.5
5.5
4.6
3.7
2.8
1.9
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.2
1.0
51.7
51.7
51.5
50.3
48.6
46.3
42.9
41.4
40.3
38.9
36.5
35.2
33.7
31.7
28.2
25.8
25.2
25.0
24.0
21.6
18.3
14.1
12.4
10.1
7.9
5.9
4.6
3.5
2.8
103.4
103.4
103.0
100.3
97.2
92.7
85.7
82.6
80.4
77.6
73.3
70.0
67.7
63.4
56.5
51.6
50.0
49.8
47.9
42.9
36.6
28.1
25.2
20.0
15.4
11.7
9.0
7.0
5.9
155.1
155.1
154.6
150.6
145.8
139.0
128.6
124.0
120.7
116.5
109.8
105.1
101.4
95.1
84.7
77.4
75.2
74.8
71.8
64.2
54.9
42.5
37.6
29.8
23.2
17.6
13.7
10.5
8.6
258.6
258.6
257.6
250.8
243.4
231.8
214.4
206.6
201.1
194.1
183.1
175.1
169.0
158.2
140.9
129.0
125.5
124.9
119.7
107.0
91.2
70.7
62.7
49.7
38.6
29.6
22.8
17.4
14.1
430.9
430.9
429.4
418.2
405.4
386.2
357.1
344.3
335.3
323.2
304.9
291.6
281.8
263.9
235.0
214.9
208.9
208.0
199.5
178.5
152.0
117.7
104.5
83.0
64.4
49.1
38.0
29.2
23.8
775.7
775.7
773.0
752.8
729.8
694.8
642.6
619.6
603.3
581.8
548.5
524.7
507.0
474.8
423.0
386.7
375.8
374.2
359.1
321.4
273.8
211.7
187.9
149.4
115.8
88.2
68.4
52.6
42.7
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Temperature,
°C
180
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
NONMANDATORY APPENDIX B
ASME B16.34-2004
Table B-3
Pressure Rating Ceiling Values (Cont’d)
B – Special Class
150
300
600
900
1500
2500
4500
−29 to 38
50
100
150
200
250
300
325
350
375
400
425
450
475
500
525
538
550
575
600
625
650
675
700
725
750
775
800
816
20.0
20.0
20.0
20.0
20.0
20.0
20.0
20.0
19.8
19.3
19.3
19.0
18.1
16.4
13.7
11.7
11.0
11.0
10.9
10.3
8.7
6.9
6.2
4.8
3.7
2.8
2.2
1.8
1.4
51.7
51.7
51.7
51.7
51.7
51.7
51.7
51.7
51.5
50.6
50.3
49.6
47.3
42.8
35.6
30.5
29.0
29.0
28.6
26.9
23.0
17.9
16.0
12.4
9.7
7.4
5.8
4.4
3.4
103.4
103.4
103.4
103.4
103.4
103.4
103.4
103.4
102.8
101.0
100.6
99.3
94.4
85.5
71.5
61.2
57.9
57.9
57.1
53.5
45.7
35.5
31.6
25.0
19.5
14.8
11.4
8.8
7.2
155.1
155.1
155.1
155.1
155.1
155.1
155.1
155.1
154.3
151.5
150.6
148.9
141.4
128.2
107.1
91.8
86.9
86.9
85.7
80.4
68.6
53.1
47.3
37.3
28.9
22.1
17.2
13.2
10.7
258.6
258.6
258.6
258.6
258.6
258.6
258.6
258.6
257.1
252.5
251.2
248.2
235.8
213.7
178.6
153.2
145.1
145.1
143.0
134.0
114.3
88.6
78.9
62.3
48.3
36.7
28.5
22.0
17.9
430.9
430.9
430.9
430.9
430.9
430.9
430.9
430.9
428.6
420.9
418.3
413.7
393.1
356.3
297.5
255.1
241.7
241.7
238.3
223.4
190.6
147.9
131.7
103.7
80.2
61.2
47.6
36.6
29.6
775.7
775.7
775.7
775.7
775.7
775.7
775.7
775.7
771.4
757.4
753.2
744.6
707.6
641.3
535.4
459.2
435.1
435.1
428.8
401.9
342.8
266.1
237.0
186.5
144.5
110.3
85.6
65.6
53.1
181
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Working Pressures by Class, bar
Temperature,
°C
ASME B16.34-2004
NONMANDATORY APPENDIX B
Table B-3
Pressure Rating Ceiling Values (Cont’d)
A – Standard Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
600
650
700
750
800
850
900
950
1000
1050
1100
1150
1200
1250
1300
1350
1400
1450
1500
290
260
230
200
170
140
125
110
95
80
65
50
35
20
20
20
20
20
20
20
20
20
20
15
750
750
730
705
665
605
590
570
530
510
485
450
385
365
360
325
275
205
180
140
105
75
60
40
1,500
1,500
1,455
1,410
1,330
1,210
1,175
1,135
1,065
1,015
975
900
775
725
720
645
550
410
365
275
205
150
115
85
2,250
2,250
2,185
2,115
1,995
1,815
1.765
1,705
1,595
1,525
1,460
1,350
1,160
1,090
1,080
965
825
620
545
410
310
225
175
125
3,750
3,750
3,640
3,530
3,325
3,025
2,940
2,840
2,660
2,540
2,435
2,245
1,930
1,820
1,800
1,610
1,370
1,030
910
685
515
380
290
205
6,250
6,250
6,070
5,880
5,540
5,040
4,905
4,730
4,430
4,230
4,060
3,745
3,220
3,030
3,000
2,685
2,285
1,715
1,515
1,145
860
630
485
345
11,250
11,250
10,925
10,585
9,965
9,070
8,825
8,515
7,970
7,610
7,305
6,740
5,795
5,450
5,400
4,835
4,115
3,085
2,725
2,060
1,545
1,130
875
620
Table B-3
Pressure Rating Ceiling Values (Cont’d)
B – Special Class
Working Pressures by Class, psig
Temperature,
°F
150
300
600
900
1500
2500
4500
−20 to 100
200
300
400
500
600
650
700
750
800
850
900
950
1,000
1,050
1,100
1,150
1,200
1,250
1,300
1,350
1,400
1,450
1,500
290
290
290
290
290
290
290
280
280
275
260
230
180
160
160
155
130
100
90
65
50
35
30
20
750
750
750
750
750
750
750
735
730
720
680
600
470
420
420
405
345
260
230
170
130
95
75
50
1,500
1,500
1,500
1,500
1,500
1,500
1,500
1,465
1,460
1,440
1,355
1,200
945
840
840
805
685
515
455
345
260
190
145
105
2,250
2,250
2,250
2,250
2,250
2,250
2,250
2,200
2,185
2,160
2,030
1,800
1,415
1,260
1,260
1,210
1,030
770
680
515
385
285
220
155
3,750
3,750
3,750
3,750
3,750
3,750
3,750
3,665
3,645
3,600
3,385
3,000
2,360
2,105
2,105
2,015
1,715
1,285
1,135
860
645
470
365
260
6,250
6,250
6,250
6,250
6,250
6,250
6,250
6,110
6,070
6,000
5,645
5,000
3,930
3,505
3,505
3,360
2,860
2,145
1,895
1,430
1,070
785
610
430
11,250
11,250
11,250
11,250
11,250
11,250
11,250
10,995
10,930
10,800
10,160
9,000
7,070
6,310
6,310
6,045
5,145
3,860
3,410
2,570
1,930
1,415
1,095
770
182
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
NONMANDATORY APPENDIX C
QUALITY SYSTEM PROGRAM
The products manufactured in accordance with this
Standard shall be produced under quality system program following the principles of an appropriate standard from the ISO 9000 series.1 A determination of the
need for registration and/or certification of the products
manufacturer’s quality system program by an independent organization shall be the responsibility of the manufacturer. The detailed documentation demonstrating
program compliance shall be available to the purchaser
at the manufacturer ’s facility. A written summary
description of the program utilized by the product manufacturer shall be available to the purchaser upon
request. The product manufacturer is defined as the
entity whose name or trademark appears on the product
in accordance with the marking or identification requirements of this Standard.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
1
The series is also available from the American National Standards Institute (ANSI) and the American Society for Quality Control (ASQC) as American National Standards that are identified
by a prefix “Q” replacing the prefix “ISO.” Each standard of the
series is listed in Mandatory Appendix VIII.
183
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
184
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34 INTERPRETATIONS
Interpretation No. 4
Replies to Technical Inquiries
April 6, 1998 through February 13, 2003
FOREWORD
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
This publication includes all of the written replies issued between the indicated dates by the
Secretary, speaking for the ASME B16 Committee, Standardization of Valves, Flanges, Fittings,
Gaskets, and Valve Actuators, to inquiries concerning interpretations of technical aspects of
B16.34, Valves — Flanged, Fitted and Welding End.
These replies are taken verbatim from the original letters except for a few typographical
corrections and some minor editorial corrections made for the purpose of improved clarity. In
some few instances, a review of the interpretation revealed a need for corrections of a technical
nature; in these cases, a corrected interpretation follows immediately after the original reply.
These interpretations were prepared in accordance with the accreditied ASME procedures.
ASME procedures provide for reconsideration of these interpretations when or if additioanl
information is available which the inquirer believes might affect the interpretation. Further,
persons aggrieved by this interpretation may appeal to the cognizant ASME Committee or
Subcommittee. ASME does not “approve,” “certify,” “rate,” or “endorse” any item, construction,
proprietary device, or activity.
I-1
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
4-1, 4-2, 4-3, 4-4
Interpretation: 4-1
Subject: B16.34-1996 and 1998, Flange Thickness Requirements
Date Issued: April 6, 1998
File: B16-98-006a
Question: Are flanged valves that conform to the flange thickness requirements for PN 10 steel
valves within the Scope of ASME B16.34-1996 or 1998?
Reply: No.
Interpretation: 4-2
Subject: B16.34-1998, Use of Table 3 to Determine Minimum Wall Thickness
Date Issued: April 6, 1998
File: B16-98-006b
Question: Under the rules of B16.34-1998, is it permissible to use Table 3 to extrapolate minimum
wall thickness for valves having pressure-temperature ratings less than Class 150?
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Reply: No.
Interpretation: 4-3
Subject: B16.34-1996, para. 6.1.6
Date Issued: April 6, 1998
File: B16-98-006c
Question: Do the rules of para. 6.1.6 in B16.34-1996 apply to local areas having less than the
required minimum wall thickness resulting from manufacturing operations, such as casting,
forging, and machining, including grinding, milling, and drilling?
Reply: Yes.
Interpretation: 4-4
Subject: B16.34-1996, para. 5.2.2
Date Issued: May 2, 1998
File: B16-98-008
Question: Does ASME B16.34-1996, para. 5.2.2 place an obligation on a user to specify service
conditions when those conditions are in a range that dictate the need for compliance with
special requirements for material processing or testing, such as those cited in the example of that
paragraph?
Reply: Yes.
I-2
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
4-5, 4-6, 4-7, 4-8
ASME B16.34-2004
Interpretation: 4-5
Subject: B16.34-1996, Designation of B16.34 Identification on a Valve and Valve Sizing
Date Issued: May 2, 1998
File: B16-98-009
Question (1): Under ASME B16.34-1996, is it permissible to apply a “B16.34” designation on
the identification plate of a valve made of a material not listed in Table 1?
Reply (1): No.
Question (2): Under ASME B16.34-1996, is it permissible to designate a valve as being in
compliance with B16.34 when the valve is made of material not listed in Table 1 and whose
pressure-temperature rating was calculated by the method in Annex F?
Reply (2): No. The purpose of Annex F is to document the procedure used for calculating the
pressure-temperature values for Table 2.
Question (3): Annex A of B16.34-1996 lists sizes to NPS 30 and pressure classes to Class 2500.
Is there a listing or method to calculate values for larger sizes or higher pressure classes?
Reply (3): No. Annex A is an informative annex and as such is shown as one that is nonmandatory.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Interpretation: 4-6
Subject: B16.34-1996, para. 7.1
Date Issued: May 20, 1998
File: B16-98-010
Question: Under ASME Ba6.34-1996, does para. 7.1 include an allowance for bonnet joint gasket
leakage just as it does for stem packing leakage?
Reply: No.
Interpretation: 4-7
Subject: B16.34-1996, para. 6.7
Date Issued: August 31, 1998
File: B16-98-012
Question: Are the requirements of para. 6.7 of ASME B16.34-1996 applicable to a flange design
for the flanged body joint of a two-piece type ball valve body?
Reply: No. Paragraph 6.7 is specific to wafer or flangeless valves.
Interpretation: 4-8
Subject: B16.34-1996, para. 8.3.1.1
Date Issued: October 22, 1998
File: B16-98-019
Question: For Special Class valves to be in accordance with ASME B16.34-1996, may the
requirements for casting radiography of ASME BPVC Section V be substituted for those of para.
8.3.1.1?
Reply: No.
I-3
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
4-9, 4-10, 4-11, 4-12
Interpretation: 4-9
Subject: B16.34-1996, paras. 6.4.1(a) and 6.4.2(a)
Date Issued: October 22, 1998
File: B16-98-020
Question: In accordance with ASME B16.34-1996, are there conditions that permit the substitution of the bolting area requirements of 6.4.1(a) for those of 6.4.2(a)?
Reply: No.
Interpretation: 4-10
Subject: B16.34-1996, para. 8.3.1.1
Date Issued: October 22, 1998
File: B16-98-021
Question: When constructing Special Class valves that are of a configuration not specifically
illustrated in Figs. 6 through 15 of ASME B16.34-1996, may a composite that combines elements
of several of these figs. be used in order to meet the requirements of para. 8.3.1.1 for radiographic
film coverage?
Reply: Yes.
Interpretation: 4-11
Subject: B16.34-1996, paras. 6.4.1(a) and 6.4.2(a)
Date Issued: November 17, 1998
File: B16-98-022a and B16-98-022b
Question: Do the bolting requirements of para. 6.4.1(a) or para. 6.4.2(a) of ASME B16.34-1996
apply for the flanges of a bolted split-body valve? A bolted split-body valve is defined here as
having bolted flanged joints perpendicular to the pipeline in which it is installed, and said flanges
are called upon to assume the same piping loads as the valve and flanges.
Reply: Paragraph 6.4.2(a) applies. Paragraph 6.4.1(a) applies only for valve bonnets or cover
joints. Observe that these are minimum requirements, and according to para. 6.4.3, the valve
manufacturer must determine if additional bolting is needed.
Interpretation: 4-12
Subject: B16.34-1996, In-Service Requirements for Valves
Date Issued: November 17, 1998
File: B16-98-023
Question: For a new valve, constructed in accordance with the requirements of ASME B16.341996, are there ASME B16.34 requirements for subsequent disassembly, cleaning, reassembly, and
testing?
Reply: No.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
I-4
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
4-13, 4-14, 4-15, 4-16
ASME B16.34-2004
Interpretation: 4-13
Subject: B16.34-1996, Requirements for Radiographic Examination of Flanged End Valves
Date Issued: November 17, 1998
File: B6-98-024
Question: Does ASME B16.34-1996 include requirements for radiographic examination of
flanged end valves?
Reply: No. Paragraph 8.1 defines the applicability of examinations in Section 8 as being for
Special Class Valves. Paragraph 2.1.2 limits Special Class construction to valves having threaded
or welding ends.
Interpretation: 4-14
Subject: B16.34-1996, Annex F, Table F4-A
Date Issued: December 17, 1998
File: B16-98-025
Question: For ASME B16.34-1996, may the pressure rating ceiling values of Table F4 be interchanged with pressure-temperature rating values given in Table 2?
Reply: No. Table F4 is an informative table that is presented only to illustrate how it was used
in conjunction with the rules of Annex F in the establishment of the specific rating requirements
of Table 2.
Interpretation: 4-15
Subject: B16.34-1996, para. B1.11
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Date Issued: December 17, 1998
File: B16-98-026
Question: In accordance with ASME B16.34-1996, is it permissible to substitute the radiographic
sensitivity requirements of ASME BPVC Section V, Clause T-267 for the requirements of B16.34,
para. B1.11?
Reply: No.
Interpretation: 4-16
Subject: B16.34-1996, Fig. 10
Date Issued: December 17, 1998
File: B16-98-027
Question: Figure 10 of ASME B16.34-1996 illustrates the radiographic film coverage for a platestyle flanged bonnet. When a bonnet is of a hemispherical style, does the film coverage, dimension
A, apply to the intersection of the stem hole projection and the spherical dome?
Reply: The coverage applies to the bonnet flange intersection.
I-5
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
4-17, 4-18
Interpretation: 4-17
Subject: B16.34-1996, para. 2.1.5(b), Valves Fabricated by Welding
Date Issued: February 17, 1999
File: B16-98-030
Question: For a weld-fabricated valve, constructed in accordance with the requirements of
ASME B16.34-1996, do the requirements of para. 2.1.5(b) include impact testing for high-alloy
steels to be in conformance with the ASME Boiler and Pressure Vessel Code, Section VIII, Division
1, Part UHA-51?
Reply: Yes. Note also the requirements of ASME B16.34, para. 1.2.2 for use of material at lowtemperature, para. 2.1(g) for material considerations limiting pressure ratings, and para. 2.3.2 for
low-temperature service.
Interpretation: 4-18
Subject: B16.34-1996, Date for Implementation of Requirements
Date Issued: January 13, 2000
File: B16-99-021
Question (1): Upon publication of a new edition of ASME B16.34, is there a mandatory date
for its implementation?
Reply (1): No. Implementation may be required by reference, for example, in a Code, specification, sales contract, or public law.
Question (2): For valves in full conformance with ASME B16.34-1988, manufactured prior to
January 31, 1997, the date of issuance of ASME B16.34-1996, is it required that prior to or upon
installation after January 31, 1997, that such unused valves be certified by the manufacturer to
ASME B16.34-1996?
Reply (2): No. Paragraph 1.2.3, ASME B16.34-1996 permits but does not require such updated
certification.
I-6
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
4-19, 4-20, 4-21
ASME B16.34-2004
Interpretation: 4-19
Subject: B16.34-1996, paras. 2.1.1(g), 2.2, F1.2, and 7.1
Date Issued: January 14, 2000
Question (1): For ASME B16.34-1996, do paras. 2.1.1(g) and 2.2 imply that the pressure-temperature ratings apply only to the valve shell and not to the seating elements?
Reply (1): No.
Question (2): Does ASME B16.34-1996 permit valve pressure-temperature ratings to be limited
by valve internals or seating or sealing materials?
Reply (2): Yes.
Question (3): In ASME B16.34-1996, para. F1.2, in the last sentence, do the words “other parts
such as bonnet gaskets and bolting” include a valve actuator?
Reply (3): No. An actuator does not fit the “such as” restriction.
Question (4): In ASME B16.34-1996, para 7.1, last sentence, is there a conflict between “leakage
through the stem packing shall not be cause for rejection” during the shell test that is at a pressure
11⁄2 times that of the cold working pressure and “however stem seals shall be capable of retaining
pressure at least equal to the 100°F ratings without visible leakage” that corresponds to a pressure
at least equal to the cold working pressure?
Reply (4): No.
Interpretation: 4-20
Subject: Paragraph 7.1, Shell Test
Date Issued: November 8, 2002
File: B16-02-005
Question: In accordance with ASME B16.34a-1998, if a valve shell test is performed at a
temperature higher than 100°F and at a pressure lower than 1.5 times the 100°F valve pressure
rating, does this meet the requirements of para. 7.1?
Reply: No.
Interpretation: 4-21
Subject: Paragraph 7.2, Valve Closure Test
Date Issued: February 13, 2003
File: B16-02-03971
Question: Does ASME B16.34 (1996 Edition, a-1998 Addenda) require valve closure tests in
addition to what is specified by para. 7.2?
Reply: No.
I-7
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
File: B16-99-020
ASME B16.34-2004
4-22
Interpretation: 4-22
Subject: Manufacturer’s Pressure-Temperature Rating
Date Issued: February 13, 2003
File: B16-02-03902
Question: In accordance with B16.34 (1996 Edition, 1998 Addenda), may a valve, of a specified
pressure class, having a manufacturer’s own pressure-temperature rating, one that exceeds the
published ratings in ASME B16.34, be identified as being in compliance with ASME B16.34?
Reply: No.
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
I-8
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
Scheme for the Identification of Piping Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A13.1-1996 (R2002)
Pipe Threads, General Purpose (Inch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B1.20.1-1983 (R2001)
Dryseal Pipe Threads (Inch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B1.20.3-1976 (R2003)
Cast Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.1-1998
Malleable Iron Threaded Fittings: Classes 150 and 300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.3-1998
Gray Iron Threaded Fittings: Classes 125 and 250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.4-1998
Pipe Flanges and Flanged Fittings NPS 1⁄2 Through NPS 24 Metric/Inch Standard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.5-2003
Factory-Made Wrought Buttwelding Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.9-2003
Face-to-Face and End-to-End Dimensions of Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B16.10-2000 (R2003)
Forged Fittings, Socket-Welding and Threaded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.11-2001
Cast Iron Threaded Drainage Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.12-1998
Ferrous Pipe Plugs, Bushings, and Locknuts with Pipe Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.14-1991
Cast Bronze Threaded Fittings: Classes 125 and 250 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B16.15-1985 (R2004)
Cast Copper Alloy Solder Joint Pressure Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.18-2001
Metallic Gaskets for Pipe Flanges: Ring-Joint, Spiral-Wound, and Jacketed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B16.20-1998 (R2004)
Nonmetallic Flat Gaskets for Pipe Flanges. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.21-2005
Wrought Copper and Copper Alloy Solder Joint Pressure Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.22-2001
Cast Copper Alloy Solder Joint Drainage Fittings: DWV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.23-2002
Cast Copper Alloy Pipe Flanges and Flanged Fittings: Class 150, 300, 400, 600, 900, 1500, and 2500 . . . . . . . . . . . . . . . . . . . . B16.24-2001
Buttwelding Ends. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.25-2003
Cast Copper Alloy Fittings for Flared Copper Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.26-1988
Wrought Steel Buttwelding Short Radius Elbows and Returns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.28-1994
Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings — DWV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.29-2001
Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 PSI (Sizes NPS 1⁄2 Through NPS 2) . . . . . . . . . B16.33-2002
Valves — Flanged, Threaded, and Welding End. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.34-2004
Orifice Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.36-1996
Large Metallic Valves for Gas Distribution (Manually Operated, NPS 21⁄2 to 12, 125 psig Maximum) . . . . . . . . . . . . . . . .B16.38-1985 (R2005)
Malleable Iron Threaded Pipe Unions: Classes 150, 250, and 300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.39-1998
Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.40-2002
Functional Qualification Requirements for Power Operated Active Valve Assemblies for Nuclear Power Plants . . . . . . . .B16.41-1983 (R1989)
Ductile Iron Pipe Flanges and Flanged Fittings: Classes 150 and 300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.42-1998
Manually Operated Metallic Gas Valves for Use in Aboveground Piping Systems Up To 5 PSI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.44-2002
Cast Iron Fittings for Sovent® Drainage Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.45-1998
Large Diameter Steel Flanges (NPS 26 Through NPS 60) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.47-1996
Steel Line Blanks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.48-1997
Factory-Made Wrought Steel Buttwelding Induction Bends for Transportation and Distribution Systems. . . . . . . . . . . . . . . . . . . . . B16.49-2000
Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B16.50-2001
Power Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B31.1-2001
Fuel Gas Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B31.2-1968
Process Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B31.3-2002
Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B31.4-2002
Refrigeration Piping and Heat Transfer Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B31.5-2001
Gas Transmission and Distribution Piping Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B31.8-1999
Building Services Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B31.9-1996
Slurry Transportation Piping Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B31.11-2002
Manual for Determining the Remaining Strength of Corroded Pipelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B31G-1991 (R2004)
Welded and Seamless Wrought Steel Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B36.10M-2000
Stainless Steel Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B36.19M-1985 (R2002)
Self-Operated and Power-Operated Safety-Related Valves Functional Specification Standard . . . . . . . . . . . . . . . . . . . . . .N278.1-1975 (R1992)
The ASME Publications Catalog shows a complete list of all the Standards published by the Society. For a complimentary catalog, or the latest
information about our publications, call 1-800-THE-ASME (1-800-843-2763).
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
B16 AMERICAN NATIONAL STANDARDS FOR PIPING,
PIPE FLANGES, FITTINGS, AND VALVES
ASME Services
ASME is committed to developing and delivering technical information. At ASME’s Information Central, we make every effort to answer your
questions and expedite your orders. Our representatives are ready to assist you in the following areas:
ASME Press
Codes & Standards
Credit Card Orders
IMechE Publications
Meetings & Conferences
Member Dues Status
Member Services & Benefits
Other ASME Programs
Payment Inquiries
Professional Development
Short Courses
Publications
Public Information
Self-Study Courses
Shipping Information
Subscriptions/Journals/Magazines
Symposia Volumes
Technical Papers
How can you reach us? It’s easier than ever!
There are four options for making inquiries* or placing orders. Simply mail, phone, fax, or E-mail us and an Information Central representative
will handle your request.
Mail
ASME
22 Law Drive, Box 2900
Fairfield, New Jersey
07007-2900
Call Toll Free
US & Canada: 800-THE-ASME
(800-843-2763)
Mexico: 95-800-THE-ASME
(95-800-843-2763)
Universal: 973-882-1167
Fax—24 hours
973-882-1717
973-882-5155
E-Mail—24 hours
Infocentral@asme.org
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
* Information Central staff are not permitted to answer inquiries about the technical content of this code or standard. Information as to
whether or not technical inquiries are issued to this code or standard is shown on the copyright page. All technical inquiries must be
submitted in writing to the staff secretary. Additional procedures for inquiries may be listed within.
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
ASME B16.34-2004
--``,,,```,,``,,,`,,,`,,,,,`,,``-`-`,,`,,`,`,,`---
Copyright ASME International
Provided by IHS under license with ASME
No reproduction or networking permitted without license from IHS
J01804
Licensee=phoenix park gas processors ltd/5919756001, User=Ousman, Theron
Not for Resale, 09/19/2008 08:42:59 MDT
Download