Small and Medium AC Motors General Information
Large AC
Industrial AC Motors
Capabilities(5)
General Purpose Motors
PRODUCT NAME
Frames
• SABRE (TEFC & ODP)
• CALIBRE
PRODUCT NAME
• Extra Tough (XT) (EPACT)
• Brake Motor (EPACT)
• Torque Max (EPACT)
• Automotive Duty
• Open Drip Proof (EPACT)
• Variable Freq. Brake Motor (EPACT)
CT
NOTES
15 to 60 HZ
30 to 60 Hz
30 to 60 Hz
30 to 60 Hz
30 to 60 Hz
15 to 60 HZ
(see note 4)
(see note 1)
(see note 1)
Frames
VT
CT
NOTES
56 to 140T
6 to 60 Hz
15 to 60 Hz
(see note 4)
6 to 60 Hz
6 to 60 Hz
6 to 60 Hz
6 to 60 Hz
15 to 60 HZ
6 to 60 HZ
30 to 60 Hz
(see notes 2 & 6)
(see note 6)
Frames
VT
CT
NOTES
6 to 60 Hz
180T to 445T
447T to 449T
56
180T to 449T
Premium Efficient Motors
PRODUCT NAME
VT
6 to 60 Hz
6 to 60 Hz
6 to 60 Hz
6 to 60 Hz
6 to 60 Hz
6 to 60 Hz
(see note 6)
• 661XL
56 to 140T
6 to 60 Hz
• Extra Tough (XEX)
• Variable Freq. Brake Motor (XE)
180T to 210T
6 to 60 Hz
6 to 60 Hz
• Exceeds IEEE841(841XL)
• Vertical P-Base (XEX)
250T to 445T
6 to 60 Hz
15 to 60 Hz
(see note 3)
• Mining Industry Motor
• XE TENV Classic
447T to 449T
6 to 60 Hz
30 to 60 Hz*
(see note 3)
180T to 449T
6 to 60 Hz
30 to 60 Hz
• Automotive Duty (XE)
180T to 445T
6 to 60 Hz
15 to 60 Hz
RPM AC Inverter Duty
• Totally Enclosed (XE)
• Open Drip Proof (XE)
Inverter Duty AC Motors
56 to 140T
180T to 215T
254T to 286T
180T to 215T
254T to 365T
404T to 449T
EPAct Efficiency
* NOTE: CT speed range is good for motor sizes up to: 350HP - 2 pole, 300HP - 4 pole, and 200HP - 6 pole.
Other Motor Products
PRODUCT NAME
• EZ Kleen Plus (EZ+)
• Ultra Kleen
• Variable Freq. Washdown Brake Motor (EZ+)
VT
CT
NOTES
6 to 60 Hz
15 to 60 Hz
(see note 4)
180 to 256T
6 to 60 Hz
30 to 60 Hz
(see note 1)
56 to 140T
6 to 60 Hz
15 to 60 Hz
• Metre 1
D80 to D280M
6 to 60 Hz
15 to 60 Hz
• Synchronous Permanent Magnet
56,140T,180T
6 to 60 Hz
6 to 60 Hz
56 to 140T
6 to 60 Hz
6 to 60 Hz
• Synchronous Reluctance
• RPMAC, Vector Motor, Vector Washdown Motor
56 to 180T
0 to 60 Hz
0 to 60 Hz
• Low Voltage Inverter Duty
56 to 140T
6 to 60 Hz
6 to 60 Hz
• Explosion Proof Inverter Duty
56 to 140T
6 to 60 Hz
6 to 60 Hz
• Submersible
180 to 440
6 to 60 Hz
N/A
TENV or TEBC
These motors exceed the insulation requirements described in NEMA MG1-1998, Part 31, Section IV,
for Definite Purpose, Inverter-Fed Polyphase motors.
Notes:
3. CT: 6 to 60 Hz with fan change. Fan change not available on non1. Specific motor ratings may in fact be capable of greater frequency
NAFTA motors.
range for Constant Torque applications. If required, contact Rockwell
Automation Sales Engineers representing DODGE and Reliance
4. CT: TEFC 15-60 Hz, TENV 6-60 Hz
Electric brands of products.
5. Products may not be available in all frame sizes shown
2. CT:30-60 Hz with fan change. Fan change not available on non6. SABRE stock 575V are not suitable for use on inverter. Use XE
NAFTA motors.
motors or EM.
M-273
General Information
Proper installation of the inverter and motor with the drive tuned to the motor for a specific application is critical to maintaining optimal equipment
performance. Personnel trained in the operation and commissioning of inverters should be utilized so that operating parameters (such as power
lead lengths, and voltage at the motor terminals) and all applicable electrical codes and regulations are considered. In most applications, Reliance
recommends the use of voltage filter devices (such as Allen Bradley’s Terminator) which will limit any potentially damaging voltage spikes.
RPM III Medium DC Motors
Application Information
RPM XL Small DC Motors
• High Cycle Brake Motor
Frames
56 to 140T