Add to collection(s) Add to saved
  1. No category
Uploaded by yasamlvp

vPC Lab

advertisement 
vPC
(Double Sided)
Cisco dCloud
Cisco Data Center Network Manager 11.5 for Traditional Networks v1
11/11/21
Ashish Sehgal
1
CSR-2
CSR-1
gi5
10.10.50.0/24
Web Host
10.10.50.10/24
gi2
gi 3
gi4
10.10.40.1-2/24
Spine-1
10.
10.
30.
1-2
1/5
1/4
1/5
vPC Domain 100
1/4
VLAN 20
Non-LACP Trunk
10.10.20.1-2/24
OSPF
vPC Domain 200
Leaf-1
gi2
vmnic1
gi3
10.10.60.1-2/24
/24
1/6
1/1
1/1
1/2
1/2
1/3
1/3
1/6
1/1
1/1
1/2
1/2
1/3
vmnic2
ESXi-1
Server-1 20.20.20.20
Server-2 20.20.20.50
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/4
1/5
1/6
1/3
1/5
Leaf-2
1/4
VLAN 10 - Access LACP
Server-3
10.10.10.10/24
Management IP Addresses
Device Name
IP Address
CSR-1
198.18.4.51
CSR-2
198.18.4.52
Leaf-1
198.18.4.101
Leaf-2
198.18.4.102
Spine-1
198.18.4.201
Spine-2
198.18.4.202
Double Sided vPC
1.
2.
3.
4.
5.
Configuring vPC
Configuring the VLAN Interface with HSRP
Configuring OSPF Between CSRs and the Spines
Configuring VMM
Configure Remaining vPCs
11/11/21
Ashish Sehgal
StringzNet
5
StringzNet
1. Configuring vPC
•
•
•
•
•
Enable features
Configure vpc domain
Configure vpc peer-keepalive
Configure peer-link
Configure vPC
11/11/21
Ashish Sehgal
6
Configuring vPC Domain 200
Field
Peer-1
Peer-2
vPC Domain ID
200
200
vPC Keep-alive Local IP Address
198.18.4.201
198.18.4.202
vPC Keep-alive VRF Name
Management
Management
Peer Link Port Channel ID
200
200
Peer Link Member Interfaces
e1/1, e1/2
e1/1, e1/2
Port Channel Mode
Active
Active
Peer Link Port Channel Description
Link to Spine-2
Link to Spine-1
Spine-1
1/5
1/5
vPC Domain 200
1/4
1/3
1/1
1/1
1/2
1/2
1/3
1/4
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
Configuring vPC Domain 200
Spine-1
vPC Domain 200
Po 200
1/1
1/1
1/2
1/2
198.18.4.201
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
198.18.4.202
Spine-1
Spine-2
# feature vpc
# feature lacp
# feature vpc
# feature lacp
# vpc domain 200
# peer-keepalive destin 198.18.4.202
source 198.18.2.201
# int e1/1-2
# channel-group 200 force mode active
# no shut
# int po200
# description Link to Spine-2
# switchport mode trunk
# vpc peer-link
# no shut
# vpc domain 200
# peer-keepalive destin 198.18.4.201 source
198.18.4.202
# int e1/1-2
# channel-group 200 force mode active
# no shut
# int po200
# description Link to Spine-1
# switchport mode trunk
# vpc peer-link
# no shut
Verifying vPC Domain 200
Spine-1
vPC Domain 200
Po 200
1/1
1/1
1/2
1/2
198.18.4.201
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
198.18.4.202
Spine-1
Spine-2
# feature vpc
# feature lacp
# feature vpc
# feature lacp
# vpc domain 200
# peer-keepalive destin 198.18.4.202
source 198.18.2.201
# int e1/1-2
# channel-group 200 force mode active
# no shut
# int po200
# description Link to Spine-2
# switchport mode trunk
# vpc peer-link
# no shut
# vpc domain 200
# peer-keepalive destin 198.18.4.201 source
198.18.4.202
# int e1/1-2
# channel-group 200 force mode active
# no shut
# int po200
# description Link to Spine-1
# switchport mode trunk
# vpc peer-link
# no shut
Configuring vPC Domain 100
Field
Peer-1
Peer-2
vPC Domain ID
100
100
vPC Keep-alive Local IP Address
198.18.4.101
198.18.4.102
vPC Keep-alive VRF Name
Management
Management
Peer Link Port Channel ID
100
100
Peer Link Member Interfaces
e1/1, e1/2
e1/1, e1/2
Port Channel Mode
Active
Active
Peer Link Port Channel Description
Link to Leaf-2
Link to Leaf-1
Leaf-1
1/5
vPC Domain 100
1/4
1/5
1/6
1/1
1/1
1/2
1/2
1/3
1/3
1/4
Leaf-2
Configuring vPC Domain 100
Leaf-1
vPC Domain 100
Leaf-2
Po100
1/1
1/1
1/2
1/2
198.18.4.101
198.18.4.102
Leaf-1
Leaf-2
# feature vpc
# feature lacp
# vpc domain 100
# peer-keepalive destin 198.18.4.102
source 198.18.4.101
# int e1/1-2
# channel-group 100 force mode active
# no shut
# int po100
# description Link to Leaf-2
# switchport mode trunk
# vpc peer-link
# no shut
# feature vpc
# feature lacp
# vpc domain 100
# peer-keepalive destin 198.18.4.101
source 198.18.4.102
# int e1/1-2
# channel-group 100 force mode active
# no shut
# int po100
# description Link to Leaf-1
# switchport mode trunk
# vpc peer-link
# no shut
Configuring vPC Domain 100
Leaf-1
vPC Domain 100
Leaf-2
Po100
1/1
1/1
1/2
1/2
198.18.4.101
198.18.4.102
Leaf-1
Leaf-2
# feature vpc
# feature lacp
# vpc domain 100
# peer-keepalive destin 198.18.4.102
source 198.18.4.101
# int e1/1-2
# channel-group 100 force mode active
# no shut
# int po100
# description Link to Leaf-2
# switchport mode trunk
# vpc peer-link
# no shut
# feature vpc
# feature lacp
# vpc domain 100
# peer-keepalive destin 198.18.4.101
source 198.18.4.102
# int e1/1-2
# channel-group 100 force mode active
# no shut
# int po100
# description Link to Leaf-1
# switchport mode trunk
# vpc peer-link
# no shut
Configure the interfaces between the Spines and the Leafs
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
Spine-1
vPC Domain 200
1/4
Leaf-1
1/5
1/3
1/6
1/3 1/4
1/6
1/5
Leaf-2
vPC Domain 100
Spine-1
Spine-2
# int
#
#
# int
#
#
#
# int
#
#
# int
#
#
#
e1/3-4
channel-group 20 force mode active
no shut
po20
switchport mode trunk
vpc 20
no shut
e1/3-4
channel-group 20 force mode active
no shut
po20
switchport mode trunk
vpc 20
no shut
Configure the interfaces between the Spines and the Leafs
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
Spine-1
vPC Domain 200
1/4
1/3
Po20
Leaf-1
1/5
1/6
1/3 1/4
1/6
1/5
Leaf-2
vPC Domain 100
Leaf-1
Leaf-2
# int
#
#
# int
#
#
#
# int
#
#
# int
#
#
#
e1/5-6
channel-group 20 force mode active
no shut
po20
switchport mode trunk
vpc 20
no shut
e1/5-6
channel-group 20 force mode active
no shut
po20
switchport mode trunk
vpc 20
no shut
Verify the vPC Status – Leaf Switches
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
Spine-1
vPC Domain 200
1/4
Leaf-1
1/5
1/3
1/6
1/3 1/4
1/6
1/5
Leaf-2
vPC Domain 100
Leaf-1
Leaf-2
# int
#
#
# int
#
#
#
# int
#
#
# int
#
#
#
e1/5-6
channel-group 20 force mode active
no shut
po20
switchport mode trunk
vpc 20
no shut
e1/5-6
channel-group 20 force mode active
no shut
po20
switchport mode trunk
vpc 20
no shut
Verify the vPC Status – Spine Switches
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
Spine-1
vPC Domain 200
1/4
Leaf-1
1/5
1/3
1/6
1/3 1/4
1/6
1/5
Leaf-2
vPC Domain 100
Spine-1
Spine-2
# int
#
#
# int
#
#
#
# int
#
#
# int
#
#
#
e1/3-4
channel-group 20 force mode active
no shut
po20
switchport mode trunk
vpc 20
no shut
e1/3-4
channel-group 20 force mode active
no shut
po20
switchport mode trunk
vpc 20
no shut
Double Sided vPC
1.
2.
3.
4.
5.
Configuring vPC
Configuring the VLAN Interface with HSRP
Configuring OSPF Between CSRs and the Spines
Configuring VMM
Configure Remaining vPCs
11/11/21
Ashish Sehgal
StringzNet
17
StringzNet
2. Configuring the VLAN
Interface with HSRP
• Enable features
• Configure HSRP
11/11/21
Ashish Sehgal
18
CSR-2
CSR-1
gi5
10.10.50.0/24
gi2
Web Host
10.10.50.10/24
gi 3
gi4
10.10.40.1-2/24
gi2
10.10.20.1-2/24
OSPF
10.
10.
30.
1-2
1/5
Spine-1
vPC Domain 200
1/4
1/5
vPC Domain 100
Leaf-1
1/4
VLAN 20
Non-LACP Trunk
vmnic1
gi3
10.10.60.1-2/24
/24
1/6
1/1
1/1
1/2
1/2
1/3
1/3
1/6
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/4
1/5
1/6
1/1
1/1
1/2
1/2
1/3
1/5
1/3
Leaf-2
1/4
vmnic2
ESXi-1
Server-1 20.20.20.20
Server-2 20.20.20.50
VLAN 10 - Access LACP
Server-3
10.10.10.10/24
Configuring the VLAN Interface 10 with HSRP
Spine-1
vPC Domain 200
Spine-2
1/1
1/1
1/2
1/2
Spine-1
# vlan 10, 20
# feature interface-vlan
# feature hsrp
# interface vlan 10
# ip add 10.10.10.1/24
# hsrp 10
# ip 10.10.10.254
# priority 50
# preempt
# exit
# no shut
# copy run start
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
Spine-2
# vlan 10, 20
# feature interface-vlan
# feature hsrp
# interface vlan 10
# ip add 10.10.10.2/24
# hsrp 10
# ip 10.10.10.254
# priority 100
# preempt
# exit
# no shut
# copy run start
Verifying interface Vlan 10 with HSRP
Spine-1
vPC Domain 200
Spine-2
1/1
1/1
1/2
1/2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
Spine-1
Spine-2
Configuring the VLAN Interface 20 with HSRP
Spine-1
vPC Domain 200
Spine-2
1/1
1/1
1/2
1/2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
Spine-1
Spine-2
# interface vlan 20
# ip add 20.20.20.1/24
# hsrp 20
# ip 20.20.20.254
# priority 50
# preempt
# exit
# no shut
# copy run start
# interface vlan 20
# ip add 20.20.20.2/24
# hsrp 20
# ip 20.20.20.254
# priority 100
# preempt
# exit
# no shut
# copy run start
Verifying the VLAN Interface 20 with HSRP
Spine-1
vPC Domain 200
Spine-1
Spine-2
1/1
1/1
1/2
1/2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
Spine-2
Double Sided vPC
1.
2.
3.
4.
5.
Configuring vPC
Configuring the VLAN Interface with HSRP
Configuring OSPF Between CSRs and the Spines
Configuring VMM
Configure Remaining vPCs
11/11/21
Ashish Sehgal
StringzNet
24
StringzNet
3. Configuring OSPF
Between CSRs and the
Spines
• Configure OSPF for the interfaces on Spine-1 and Spine-2 towards the CSRs
11/11/21
Ashish Sehgal
25
CSR-2
CSR-1
10.10.50.0/24
gi5
gi2
Web Host
10.10.50.10/24
gi 3
gi4
10.10.40.1-2/24
gi2
10.10.20.1-2/24
OSPF
10.
10.
30.
1-2
1/5
Spine-1
vPC Domain 200
1/4
1/5
Leaf-1
vPC Domain 100
1/4
VLAN 20
Non-LACP Trunk
vmnic1
gi3
10.10.60.1-2/24
/24
1/6
1/1
1/1
1/2
1/2
1/3
1/3
1/6
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/4
1/5
1/6
1/1
1/1
1/2
1/2
1/3
1/5
1/3
Leaf-2
1/4
vmnic2
ESXi-1
Server-1 20.20.20.20
Server-2 20.20.20.50
VLAN 10 - Access LACP
Server-3
10.10.10.10/24
Configuring OSPF Between CSRs and the Spines
gi2
gi4
gi3
10.10.40.1-2/24
1/5
OSPF
gi2
10.
10.
30.
1-2
1/6
Spine-1
Spine-1
10.10.60.1-2/24
/24
1/5
Spine-2
Spine-2
#
feature ospf
#
feature ospf
#
router ospf 100
# router-id 1.1.1.1
#
router ospf 100
# router-id 2.2.2.2
#
int loop0
# ip add 1.1.1.1/32
# ip router ospf 100 area 0
# ip ospf network point-to-point
# no shut
#
#
int e1/5
# ip address 10.10.40.2/24
# mtu 1500
# ip router ospf 100 area 0
# ip ospf network point-to-point
# no shut
int loop0
# ip add 2.2.2.2/32
# ip router ospf 100 area 0
# ip ospf network point-topoint
# no shut
#
int e1/5
# ip address 10.10.60.2/24
# mtu 1500
# ip router ospf 100 area 0
# ip ospf network point-topoint
# no shut
#
int e1/6
# ip address 10.10.30.2/24
# mtu 1500
# ip router ospf 100 area 0
# ip ospf network point-topoint
# no shut
Configuring OSPF Between CSRs and the Spines
gi2
CSR-1
gi4
gi3
10.10.40.1-2/24
1/5
OSPF
CSR-2
gi2
10.
10.
30.
1-2
Spine-1
10.10.60.1-2/24
/24
1/6
1/5
Spine-2
CSR-1
CSR-2
# int gig3
# ip ospf network point-to-point
# no shut
# int gig3
# ip ospf network point-to-point
# no shut
# int gig4
# ip ospf network point-to-point
# no shut
Verification
gi2
gi4
gi3
10.10.40.1-2/24
1/5
Spine-1
Spine-1
OSPF
gi2
10.
10.
30.
1-2
10.10.60.1-2/24
/24
1/6
1/5
Spine-2
# show ip ospf neighbor
Spine-2
Double Sided vPC
1.
2.
3.
4.
5.
Configuring vPC
Configuring the VLAN Interface with HSRP
Configuring OSPF Between CSRs and the Spines
Configuring VMM
Configure Remaining vPCs
11/11/21
Ashish Sehgal
StringzNet
30
StringzNet
4. Configuring VMM
• VMM Integration with DCNM
• Configure OSPF for the interfaces on Spine-1 and Spine-2 towards the CSRs
11/11/21
Ashish Sehgal
31
CSR-2
CSR-1
gi5
10.10.50.0/24
Web Host
10.10.50.10/24
gi2
gi 3
gi4
10.10.40.1-2/24
Spine-1
10.
10.
30.
1-2
1/5
1/4
1/5
vPC Domain 100
1/4
VLAN 20
Non-LACP Trunk
10.10.20.1-2/24
OSPF
vPC Domain 200
Leaf-1
gi2
vmnic1
gi3
10.10.60.1-2/24
/24
1/6
1/1
1/1
1/2
1/2
1/3
1/3
1/6
1/1
1/1
1/2
1/2
1/3
vmnic2
ESXi-1
Server-1 20.20.20.20
Server-2 20.20.20.50
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/4
1/5
1/6
1/3
1/5
Leaf-2
1/4
VLAN 10 - Access LACP
Server-3
10.10.10.10/24
C1sco12345!
Configure Leaf-1 port to ESXi and then, from the
ESXi server, ping the gateway and the web-host.
Spine-1
vPC Domain 200
1/4
1/5
vPC Domain 100
Leaf-1
1/4
VLAN 20
Non-LACP Trunk
vmnic1
1/1
1/1
1/2
1/2
1/3
1/3
1/6
1/5
1/6
1/1
1/1
1/2
1/2
1/3
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/4
1/3
Leaf-2
1/4
vmnic2
ESXi-1
Server-1 20.20.20.20
Server-2 20.20.20.50
VLAN 10 - Access LACP
Server-3
10.10.10.10/24
CSR-2
CSR-1
gi5
10.10.50.0/24
gi2
Web Host
10.10.50.10/24
gi 3
gi4
10.10.40.1-2/24
gi2
10.10.20.1-2/24
OSPF
10.
10.
30.
1-2
1/5
Spine-1
vPC Domain 200
1/4
1/5
vPC Domain 100
Leaf-1
1/4
VLAN 20
Non-LACP Trunk
vmnic1
gi3
10.10.60.1-2/24
/24
1/6
1/1
1/1
1/2
1/2
1/3
1/3
1/6
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/4
1/5
1/6
1/1
1/1
1/2
1/2
1/3
1/5
1/3
Leaf-2
1/4
vmnic2
ESXi-1
Server-1 20.20.20.20
Server-2 20.20.20.50
VLAN 10 - Access LACP
Server-3
10.10.10.10/24
Advertise the VLAN interface to OSPF
Spine-1
vPC Domain 200
Po 200
1/1
1/1
1/2
1/2
198.18.4.201
Spine-1
# interface vlan 20
# ip add 20.20.20.1/24
# no ip redirect
# ip router ospf 100 area 0
# no shut
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
198.18.4.202
Spine-2
# interface vlan 20
# ip add 20.20.20.2/24
# no ip redirect
# ip router ospf 100 area 0
# no shut
CSR-2
CSR-1
gi5
10.10.50.0/24
gi2
Web Host
10.10.50.10/24
gi 3
gi4
10.10.40.1-2/24
gi2
10.10.20.1-2/24
OSPF
10.
10.
30.
1-2
1/5
Spine-1
vPC Domain 200
1/4
1/5
vPC Domain 100
Leaf-1
1/4
VLAN 20
Non-LACP Trunk
vmnic1
gi3
10.10.60.1-2/24
/24
1/6
1/1
1/1
1/2
1/2
1/3
1/3
1/6
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/4
1/5
1/6
1/1
1/1
1/2
1/2
1/3
1/5
1/3
Leaf-2
1/4
vmnic2
ESXi-1
Server-1 20.20.20.20
Server-2 20.20.20.50
VLAN 10 - Access LACP
Server-3
10.10.10.10/24
Double Sided vPC
1.
2.
3.
4.
5.
Configuring vPC
Configuring the VLAN Interface with HSRP
Configuring OSPF Between CSRs and the Spines
Configuring VMM
Configure Remaining vPCs
11/11/21
Ashish Sehgal
StringzNet
46
StringzNet
5. Configuring Remaining vPCs
• Configure vPCs
11/11/21
Ashish Sehgal
47
CSR-2
CSR-1
gi5
10.10.50.0/24
gi2
Web Host
10.10.50.10/24
gi 3
gi4
10.10.40.1-2/24
gi2
10.10.20.1-2/24
OSPF
10.
10.
30.
1-2
1/5
Spine-1
vPC Domain 200
1/4
1/5
vPC Domain 100
Leaf-1
1/4
Non-LACP Trunk port
VLAN 20
Non-LACP Trunk
vmnic1
gi3
10.10.60.1-2/24
/24
1/6
1/1
1/1
1/2
1/2
1/3
1/3
1/6
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/4
1/5
1/6
1/1
1/1
1/2
1/2
1/3
1/5
1/3
Leaf-2
1/4
Configuring vPC
vmnic2
ESXi-1
Server-1 20.20.20.20
Server-2 20.20.20.50
VLAN 10 - Access LACP
Server-3
10.10.10.10/24
Configure vPC
1/5
vPC Domain 100
Leaf-1
1/4
Non-LACP Trunk port
VLAN 20
Non-LACP Trunk
vmnic1
1/6
1/5
1/6
1/1
1/1
1/2
1/2
1/3
Leaf-2
1/3
1/4
Configuring vPC
vmnic2
ESXi-1
Server-1 20.20.20.20
Server-2 20.20.20.50
VLAN 10 - Access LACP
Server-3
10.10.10.10/24
Leaf-1
Leaf-2
# int
#
#
# int
#
#
#
# int
#
#
# int
#
#
#
e1/3
channel-group 55 force mode active
no shut
po55
switchport mode trunk
vpc 55
no shut
e1/4
channel-group 55 force mode active
no shut
po55
switchport mode trunk
vpc 55
no shut
Verifying vPC
1/5
vPC Domain 100
Leaf-1
1/4
Non-LACP Trunk port
VLAN 20
Non-LACP Trunk
vmnic1
1/6
1/5
1/6
1/1
1/1
1/2
1/2
1/3
Leaf-2
1/3
1/4
Configuring vPC
vmnic2
ESXi-1
Server-1 20.20.20.20
Server-2 20.20.20.50
VLAN 10 - Access LACP
Server-3
10.10.10.10/24
Leaf-1
Leaf-2
# int
#
#
# int
#
#
#
# int
#
#
# int
#
#
#
e1/3
channel-group 55 force mode active
no shut
po55
switchport mode trunk
vpc 55
no shut
e1/4
channel-group 55 force mode active
no shut
po55
switchport mode trunk
vpc 55
no shut
Advertise VLAN 10 in OSPF on Spine-1 & Spine-2
CSR-2
CSR-1
10.10.50.0/24
gi5
gi2
Web Host
10.10.50.10/24
gi 3
gi4
10.10.40.1-2/24
gi2
10.10.20.1-2/24
OSPF
10.
10.
30.
1-2
1/5
Spine-1
vPC Domain 200
1/4
gi3
10.10.60.1-2/24
/24
1/6
1/1
1/1
1/2
1/2
1/3
Spine-1
# interface vlan 10
# ip router ospf 100 area 0
# no shut
1/3
1/5
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/4
Spine-2
# interface vlan 10
# ip router ospf 100 area 0
# no shut
Verification – Reachability from Server 3 to HSRP Gw
Spine-1
vPC Domain 200
1/4
1/5
vPC Domain 100
Leaf-1
1/4
Non-LACP Trunk port
VLAN 20
Non-LACP Trunk
vmnic1
1/1
1/1
1/2
1/2
1/3
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
1/3
1/6
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/5
1/6
1/1
1/1
1/2
1/2
1/3
1/4
1/3
Leaf-2
1/4
Configuring vPC
vmnic2
ESXi-1
Server-1 20.20.20.20
Server-2 20.20.20.50
VLAN 10 - Access LACP
Server-3
10.10.10.10/24
CSR-2
CSR-1
gi5
10.10.50.0/24
gi2
Web Host
10.10.50.10/24
gi 3
gi4
10.10.40.1-2/24
gi2
10.10.20.1-2/24
OSPF
10.
10.
30.
1-2
1/5
Spine-1
vPC Domain 200
1/4
1/5
vPC Domain 100
Leaf-1
1/4
Non-LACP Trunk port
VLAN 20
Non-LACP Trunk
vmnic1
gi3
10.10.60.1-2/24
/24
1/6
1/1
1/1
1/2
1/2
1/3
1/3
1/6
Spine-2
VLAN 10 – HSRP, SVI, VLAN -10.10.10.254
VLAN 20 – HSRP, SVI, VLAN -20.20.20.254
1/4
1/5
1/6
1/1
1/1
1/2
1/2
1/3
1/5
1/3
Leaf-2
1/4
Configuring vPC
vmnic2
ESXi-1
Server-1 20.20.20.20
Server-2 20.20.20.50
VLAN 10 - Access LACP
Server-3
10.10.10.10/24
Thank you
11/11/21
Ashish Sehgal
Ashish Sehgal
54
Download
advertisement