HPE Support Center
HPE 3PAR StoreServ 20000 Storage - Specifications
System specifications
Physical specifications
Electrical specifications
Environmental specifications
Safety and environmental specifications
Link to product overview information
Link to product related documents
System specifications
Find in table
Description
HPE 3PAR StoreServ
20450 Storage
HPE 3PAR StoreServ
20800 Storage
HPE 3PAR StoreServ
20850 Storage
HPE 3PAR StoreServ
20840 Storage
Number of controller nodes
2 or 4
2, 4, 6 or 8
2, 4, 6 or 8
2, 4, 6 or 8
HPE 3PAR Gen5 ASICs
4 or 8
4, 8, 12 or 16
4, 8, 12 or 16
4, 8, 12 or 16
Management processors
4-8 x 8 core 2.5 GHz
4-16 x 8 core 2.5 GHz
4-16 x 10 core 2.4 GHz
Total cache
0.9-1.8TiB
0.6-34.5TiB
0.9-3.6TiB
0.9-51.6TiB
Flash cache (Optional)
NA
0-32TiB
NA
0-48TiB
Maximum on-node cache
896-1792GiB
640-2560GiB
896-3584GiB
Specifications
Capacity details
Total NVMe storage class
memory module
Maximum host ports
896-3584GiB
2-4TB
2-8TB
2-8TB
2-8TB
3TB
6TB
6TB
6TB
160 Ports
160 Ports
160 Ports
32 Gb/s Fibre Channel (FC) 0-40 Ports
host ports1
0-80 Ports
0-80 Ports
0-80 Ports
16 Gb/s FC host ports2
0-80 Ports
0-160 Ports
0-160 Ports
0-160 Ports
10 Gb/s iSCSI host ports2
0-40 Ports
0-80 Ports
0-80 Ports
0-80 Ports
0-24 Ports
0-48 Ports
0-48 Ports
0-48 Ports
Built-in 10 GbE ports4
2-4 Ports
2-8 Ports
2-8 Ports
2-8 Ports
Number of Hard Disk Drive
(HDD)
NA
6-2304 Drives
NA
6-2304 Drives
Number of Solid State
Drive (SSD)
6-576 Drives
6-1152 Drives
6-1152 Drives
6-1152 Drives
Raw capacity
1.925 -4021TiB6
1.925 -9600TiB6
1.925 -8043TiB6
1.925 -9600TiB6
Raw capacity (SSD only)
1.925 -4021TiB6
1.925 -8043TiB6
1.925 -8043TiB6
1.925 -8043TiB6
Maximum usable file
capacity7
2-512TiB6
2-1024TiB6
2-1024TiB6
2-1024TiB6
RAID levels
RAID 0, 1, 5, MP8
RAID 0, 1, 5, MP8
RAID 0, 1, 5, MP8
RAID 0, 1, 5, MP8
RAID 5 data to parity
ratios
2:1-8:1
2:1-8:1
2:1-8:1
2:1-8:1
10 GbE network
file persona
ports3
80 Ports
for
Description
Specifications
HPE 3PAR StoreServ
20450 Storage
RAID 6 data to parity
ratios
Drive capacities (SSD)9
Drive capacities (HDDs)
HPE 3PAR StoreServ
20800 Storage
HPE 3PAR StoreServ
20850 Storage
HPE 3PAR StoreServ
20840 Storage
4:2
4:2
4:2
4:2
6:2
6:2
6:2
6:2
8:2
8:2
8:2
8:2
10:2
10:2
10:2
10:2
12:2
12:2
12:2
12:2
14:2
14:2
14:2
14:2
920GB SSD
920GB SSD
920GB SSD
920GB SSD
1920GB SSD
1920GB SSD
1920GB SSD
1920GB SSD
3840GB SSD
3840GB SSD
3840GB SSD
3840GB SSD
7680GB SSD
7680GB SSD
7680GB SSD
7680GB SSD
15360GB SSD
15360GB SSD
15360GB SSD
15360GB SSD
NA
300 15K
SAS10
600 15K
SAS10
300 15K SAS10
600 15K SAS10
600 10K SAS10
600 10K SAS10
1200 10K SAS10
1200 10K SAS10
1800 10K SAS10
1800 10K SAS10
NA
2000 7.2K SAS
NL11
2000 7.2K SAS NL11
4000 7.2K SAS
NL11
4000 7.2K SAS NL11
6000 7.2K SAS
NL11
6000 7.2K SAS NL11
8000 7.2K SAS
NL11
8000 7.2K SAS NL11
Number of drive
enclosures12
213-48 Enclosures
213-96 Enclosures
213-96 Enclosures
213-96 Enclosures
Support for 3PAR
StoreServ file controller v3
Yes
Yes
Yes
Yes
NOTE:
1. Each port is full bandwidth 32 Gb/s FC capable as applicable
2. Each port is full bandwidth 16 Gb/s FC capable as applicable.
3. Each port is full bandwidth 10 Gb/s iSCSI capable.
4. Each port is full bandwidth 10 Gb/s Ethernet designated for hosting file services and object access protocols.
5. Two built-in 10 GbE ports per node pair can be used for Remote Copy (RCIP); maximum of 8 usable; RCFC works out of the FC host
ports.
6. Minimum raw capacity currently supported based on minimum of 4 SSD per array.
7. For storage capacity, 1GiB = 230 bytes and 1TiB = 1,024GiB.
8. Usable file capacity supported for HPE 3PAR file persona.
9. RAID MP is HPE 3PAR Fast RAID 6 technology
10. SSD are SSD.
11. SAS drives are serial access SCSI drives
12. NL drives are nearline (7.2 k) drives
13. Drive enclosures can be 24 x 2.5 in drive 2U form factor or 12 x 3.5 in drive 2U form factor.
Recommended minimum is 4 drive enclosures per pair of controller nodes.
Based on 3.84TB SSD and HPE 3PAR compaction technologies that deliver 2:1 Thin capacity savings and 2:1 Deduplication capacity savings.
32Gb FC host support requires 3PAR OS 3.3.1 MU4 or later and the 32Gb FC HBA is the same SKU for the 3PAR 9000 and 20000 platforms.
Check HPE spock for latest supported 3PAR software and connectivity.
Find in table
Description
Specifications
Appendix A – Legacy HPE 3PAR StoreServ 20000 models
Number of controller nodes
2, 4, 6 or 8
HPE 3PAR Gen5 ASICs
4, 8, 12 or 16
Management processors
4 - 16 Six-core 2.5 GHz
4 - 16 Eight-core 2.5 GHz
Total cache
0.4 – 33.8TiB
0.9 – 3.6TiB
0.9 – 51.3TiB
Flash cache (Optional)
0 - 32TiB
Not applicable
0 – 48TiB
Maximum on-node cache
448 – 1792GiB
896 - 3584GiB
896 – 3584GiB
Description
Specifications
Appendix A – Legacy HPE 3PAR StoreServ 20000 models
Total NVMe storage class memory
module
Maximum host ports
2-8TB
2-8TB
2-8TB
6TB
6TB
6TB
160 ports
32 Gb/s FC host
ports1
0-80 ports
16 Gb/s FC host
ports2
0–160 ports
10 Gb/s iSCSI host ports2
0-80 ports
10 Gb/s FCoE host ports
0-80 ports
10 GbE network ports3 for file
persona
0–48 ports
Built-in 10 GbE ports4
2-8 ports
Number of HDD
6-2304 drives
Not applicable
6-2304 drives
Number of SSD
6–1152
6–1152
6–1152
Raw capacity
1.925-9600TiB6
1.925-8043TiB6
1.92-9600TiB6
Raw capacity (SSD only)
1.925-8043TiB6
1.925-8043TiB6
1.92-8043TiB6
Maximum usable file capacity7
2–1024TiB6
NOTE:
1. Each port is full bandwidth 32 Gb/s FC capable as applicable.
2. Each port is full bandwidth 16 Gb/s FC capable as applicable.
3. Each port is full bandwidth 10 Gb/s iSCSI or FCoE capable.
4. Each port is full bandwidth 10 Gb/s Ethernet designated for hosting file services and object access
protocols.
5. Two built-in 10 GbE ports per node pair can be used for RCIP; maximum of 8 usable; RCFC works
out of the FC host ports.
6. Minimum raw capacity currently supported based on minimum of 4 SSD per array.
7. For storage capacity, 1GiB = 230 bytes and 1TiB = 1,024GiB.
8. Usable file capacity supported for HPE 3PAR file persona.
9. NVME storage class memory module: 1-750GB SCM module per node and requires 3PAR 3.3.1
technology release T05 or higher only supported on all SSD configurations, 1 module is required per
node and only in PCI slot-3.
top
Physical specifications
Find in table
Specifications
Description
2 Meter cabinet
Dimensions (W x H x D)
59.8 x 200.6 x 112.5 cm (23.54 x 79 x 44.3 in)
Clearance for installation of cabinet
127 cm (50 in)
Service clearance (Front and rear)
Front/Rear: 101.4/91.4 cm (40/36 in)
Weight (Not populated)
190 kg (418 lb)
Maximum weight of 8-node base
rack1
(Fully populated)
571.0 kg (1256.1 lb)
Maximum weight of 4-node base
rack1
(Fully populated)
602.0 kg (1327 lb)
Maximum weight of expansion
rack2
Maximum weight per leveling foot
(Fully populated)
653.1 kg (1436.8 lb)
340.2 kg (750 lb)
Component weights
20000 8 Way node chassis
78.6 kg (173 lb)
20000 4 Way node chassis
42.3 kg (93 lb)
Specifications
Description
20000 Controller node
21.8 kg (48.15 lb)
20000 Drive enclosure
17.3 kg (38 lb)
Service processor
17 kg (37.48 lb)
HPE Rack
111.4 kg (245 lb)
Supported Host FC connections
FC Connector type from storage system to host port
LC to LC
FC Cable core diameter
OM4
Connector boot length
Standard
NOTE:
1. Includes a 20800 base rack with 8 nodes, 6 drive enclosures, 1 service processor and PDUs in a 1075 mm HPE i-Series rack.
2. Includes a 20800 expansion rack with 20 drive enclosures and PDUs in a 1075 mm HPE i-Series rack.
top
Electrical specifications
Find in table
Specifications
Description
Single phase power supply requirements (Per rack or cabinet)
NEMA (North America, Taiwan, Philippines and Japan)
Input voltage
220 (200-240) V ac
Frequency
50-60 Hz
Circuit breaker maximum
30 A Per PDU (De-Rated to 24 A)
Power plugs
(4) L6-30P with 1+1 redundant (Base and expansion racks)
Power connectors
(4) L6-30C with 1+1 redundant (Base and expansion racks)
Power receptacles
(4) L6-30R with 1+1 redundant (Base and expansion racks)
IEC (International)
Input voltage
220 (200 - 240) V ac
Frequency
50 - 60 Hz
Circuit breaker maximum
32 A per PDU
Power plugs
(4) IEC 60309-332P6 (32 A) with 1+1 redundant (Base and expansion racks)
Power connectors
(4) IEC 60309-332C6 (32 A) with 1+1 redundant (Base and expansion racks)
Power receptacles
(4) IEC 60309-332R6 (32 A) with 1+1 redundant (Base and expansion racks)
Three phase power supply requirements (Per rack or cabinet)
NEMA (North America, Taiwan, Philippines and Japan)
Input voltage
200-240 V ac ( P-P)
Frequency
50-60 Hz
Circuit breaker maximum
48 A per PDU (De-Rated to 27.71 A per phase)
Power plugs
(4) L15-30P with 1+1 redundant (Base and expansion racks)
Power connectors
(4) L15-30C with 1+1 redundant (Base and expansion racks)
Power receptacles
(4) L15-30R with 1+1 redundant (Base and expansion racks)
IEC (International)
Input voltage
200-240 V ac (P-N)
380-415 V ac (P-P)
Frequency
50-60 Hz
Specifications
Description
Circuit breaker maximum
16 A Per phase per PDU (Base and expansion racks)
Power plugs
(2) IEC 60309 - 516P6 W (16 A) with 1+1 redundant (Base and expansion racks)
Power connectors
(2) IEC 60309 - 516C6 W (16 A) with 1+1 redundant (Base and expansion rack)
Power receptacles
(2) IEC 60309 - 516R6 W (16 A) with 1+1 redundant (Base and expansion rack)
Click here to access the HPE Power Advisor online tool for power consumption, heat loading and circuit sizing information .
top
Environmental specifications
Find in table
Specifications
Description
Operating temperature
5° to 35°C (41° to 95°F) - Reduce rating by 1°F for each 1000 ft
(1.8°C/1,000 m)
Shipping temperature (Controller node)
-30° to 60°C (-22° to 140°F) - Maximum rate of change is 20°C/hr
(36°F/hr)
Shipping temperature (Drive enclosure)
0° to 60°C (32° to 140°F) - Maximum rate of change is 20°C/hr
(36°F/hr)
Altitude (ft/m) maximum
3,048 m (10,000 ft)
Shipping altitude (ft/m) maximum
12,192 m (40,000 ft)
Humidity
10% to 90% Non-Condensing
Shipping humidity
10% to 90% Non-Condensing
Operating vibration
0.25G, 5- 500 Hz, Sine 0.25 GRMS, Random 5-500 Hz
Non-operating vibration
0.5G, 5-500 Hz, Sine 0.5 GRMS, Random, 5-500 Hz
Operating shock (Controller node)
5G, 11ms, Half-Sine
Operating shock (Drive enclosure)
5G, 11ms, Half-Sine
Non-Operating shock
10G, 11ms, Half-Sine
Raised floor
Recommended
Maximum exhaust air flow
Per controller node - 157 CFM
Per drive enclosure - 81 CFM
Acoustics (Sound pressure level measured per ISO 7779)
Specifications during normal operating fan conditions
Fan speed
(RPM)
8 Way node
Fan speed
(RPM)
Drive enclosure
5600
78.9
5580
43
8500
89.5
16500
64
NOTE: The 3PAR 20000 models that use C8S89B and C8S83B storage configuration base SKUs (3PAR 20450 and legacy 3PAR
20800/20840/20850) have a maximum operating temperature of 104°F / 40°C. However, if the following drives are used (P9M61B, P9M63B
and P9L81B) the maximum operating temperature is 95° F / 35° C.
top
Safety and environmental specifications
Specifications
Electromagnetic
compatibility
Description
CISPR 22:2008/ EN55022:2010 Class A
CISPR 32 Edition 2.0/EN55032:2010 Class A
CISPR 24:2010/ EN 55024:2010
IEC 61000-3-2: 2014/ EN 61000-3-2: 2014
IEC 61000-3-3:2013/ EN 61000-3-3: 2013
Specifications
Description
AS/NZS CISPR22: 2009 +A1:2010 Class A
AS/NZS CISPR 32:2013
CNS 13438:2006 Class A
47 CFR Part 15 Subpart b Class A
ICES-003 Issue 6 Class A
V-3/2015.04
RRA Public Notification 2015-27, Dec 3, 2015
Safety
IEC 60950-1:2005 (2nd Edition); +A1:2009 +A2:2013
EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013
IEC 62368-1:2014 2nd Edition
EN 62368-1:2014 2nd Edition
EN 62479:2010CNS 14336-1 2nd Edition
UL 60950-1-07 2nd Ed. +A1:2011 +A2:2014
UL 62368-1
CAN/CSA C22.2 No. 60950-1-07 +A1:2011 +A2:2014
Certifications/markings
cTUVus mark
TUV T-mark (EN 60950)
CE Mark
FCC Class A
IC Class A
VCCI Class A
BSMI Class A
BIS
KCC
EAC
RCM
Ukraine
WEEE
China RoHS
Morocco
EU RoHS
Nordic text
NOTE: Specifications are subject to change without notice
top
Link to product overview information
Click here to view the product overview information .
top
Link to product related documents
Click here to view a list of product related documents .
top
©Copyright 2024 Hewlett Packard Enterprise Development LP
Hewlett Packard Enterprise Development shall not be liable for technical or editorial errors or omissions contained
herein. The information provided is provided "as is" without warranty of any kind. To the extent permitted by law,
neither HPE nor its affiliates, subcontractors or suppliers will be liable for incidental, special or consequential damages
including downtime cost; lost profits; damages relating to the procurement of substitute products or services; or
damages for loss of data, or software restoration. The information in this document is subject to change without notice.
Hewlett Packard Enterprise Development and the names of Hewlett Packard Enterprise Development products
referenced herein are trademarks of Hewlett Packard Enterprise Development in the United States and other countries.
Other product and company names mentioned herein may be trademarks of their respective owners.