Nov. 02, 2023
8 Ports High band Antenna, 2 x
698-960 and 2 x 1710-2690 MHz,
65 deg Horizontal beamwidth 4 x
fully internal replaceable RET
(AISG 2.0)
R1
R2
Y1
Y2
Frequency Range
698-960
698-960
1710-2690
1710-2690
HBPW
65
65
65
65
Gain
15
15
16
16
Tilt
2-12
2-12
2-12
2-12
Electrical specifications
R1, R2
698-960
Frequency Range(MHz)
698-803
880-960
14.2
15.0
14.0±0.6
14.8±0.5
67±7.5
57±6.0
Front to back Ratio Co-polar, ±30°(dB)
>25
>25
Cross Polar Discrimination at Boresight(dB)
>17
>17
13.9±1.1
11.3±1.1
Gain(dBi)
at mid Tilt
over all Tilts
Horizontal Pattern:
Azimuth Beamwidth(o)
Vertical Pattern:
Vertical-3dB Beamwidth (o)
Electrical Downtilt (°)
First Upper Side Lobe Suppression (dB)
2-12，continuously adjustable
>15
>15
Cross-Polar Isolation (dB)
> 25
Port to Port Isolation (dB)
> 25
Max. Average Input Power per Port (W)
250(at 50℃ ambient temperature)
Preliminary values based on NGMN-P-BASTA V2.0
E-mail : webmaster@acetech.co.kr l Web Site : www.acetech.co.kr Copyright 2022 Ace Technologies Corp. All Rights Reserved.
The information contained in this document is for reference purpose only. and is subject to change or withdrawal without notice.
The contents of this document may not be reproduced in whole or in part in any manner without agreement of ACE Technologies Corp.
ACE Technologies Corp.
1/3
Nov. 02, 2023
Y1, Y2
1710-2690
Frequency Range(MHz)
1710-1880
1920-2170
2300-2400
2500-2690
15.5
16.2
16.2
16.2
15.3±0.6
16.0±0.5
16.0±0.5
16.0±0.5
66±7.0
62±6.0
58±6.5
58±7.0
Front to back Ratio, Co-Polar, ±30°(dB)
>25
>25
>23
>23
Cross Polar Discrimination at Boresight (dB)
>17
>18
>18
>18
10.8±0.6
9.7±0.5
8.7±0.4
8.0±0.6
at mid Tilt
Gain(dBi)
over all Tilts
Horizontal Pattern:
Azimuth Beamwidth(o)
Vertical Pattern:
Vertical-3dB Beamwidth (o)
o
Electrical Downtilt ( )
First Upper Side Lobe Suppression (dB)
2-12，continuously adjustable
>15
>15
>15
Cross-Polar Isolation (dB)
> 25
Port to Port Isolation (dB)
> 25
Max. Average Input Power per Port (W)
>15
200(at 50℃ ambient temperature)
Electrical specifications, all systems:
Polarization
Impedance (Ω)
+45° /-45°
50
VSWR
<1.5
Return Loss (dB)
> 14
PIM3 (2x43 dBm carrier) (dBc)
<-150
Lightning Protection
DC Ground
Preliminary values based on NGMN-P-BASTA V12.0
E-mail : webmaster@acetech.co.kr l Web Site : www.acetech.co.kr Copyright 2022 Ace Technologies Corp. All Rights Reserved.
The information contained in this document is for reference purpose only. and is subject to change or withdrawal without notice.
The contents of this document may not be reproduced in whole or in part in any manner without agreement of ACE Technologies Corp.
ACE Technologies Corp.
2/3
Nov. 02, 2023
Mechanical Specifications
Connector Type
4.3/10(F) x8
Connector position
Bottom
Electrical Tilt Control
Integrated RET, Each Band Individually Adjustable
Mechanical Tilt Range
0-12
Radome Material
Fiberglass
Radiator Material
Aluminum Alloy, PCB
Reflector Material
Aluminum Alloy
Antenna Weight(kg)
Bracket Diameter(mm)
22/26 (clamps incl.)
50-125
Maximum Wind Speed(km/h)
200
Wind Load frontal [N] at 150 Km/h
710
Wind Load rear side[N] at 150 Km/h
795
Wind Load lateral [N] at 150 Km/h
315
Operating Temperature (℃)
-40 ~+60
Antenna Dimensions (H x W x D) (mm)
1647x467x167
Packing Size (H x W x D) (mm)
1867x542x242
Integrated RET Specifications
Protocols
Supply Voltage, VDC
Power Consumption
Safety Standard
Lightning Protection Rating
Connectors
Arrays of the antenna
Compliant With AISGV2.0 And 3GPP
10–30DC
<2W (standby); < 10W (motor actived)
Compliant to EN 60950/UL 60950/ RoHs (Restriction of Hazardous Substances), CE
IEC 61000-4-5 Current Pulse Profile,
Line to Ground 8/20 us @ 6kA ≥±5 Repetitions
Line to line , 8/20 us @ 3kA ≥±5 Repetitions
2 x 8 Pins Connector According To IEC60130-9 AND AISG
1 × Daisy Chain In : Male
1 × Daisy Chain Out : Female
Pin3:RS485B; Pin5:RS485A; Pin6:10~30V; Pin7: DC return
Female connector: 4 PINs ,Male connector: 4 PINs
Ports of the antenna
E-mail : webmaster@acetech.co.kr l Web Site : www.acetech.co.kr Copyright 2022 Ace Technologies Corp. All Rights Reserved.
The information contained in this document is for reference purpose only. and is subject to change or withdrawal without notice.
The contents of this document may not be reproduced in whole or in part in any manner without agreement of ACE Technologies Corp.
ACE Technologies Corp.
3/3