TG 400# Series Bi-Metal Temperature Gauges with Flanged Thermowell.
Features
FLANGE (P)
2"150 # RF
STEM
DIAL SIZE
ADJUSTABLE
CONNECTION
WELL
ØD
CAPILLARY
ØB1
Ød1
ØB
1
2"BSP
6
3
8"BSP
S.S.304 CASE WITH
BAYONET BEZEL
Performance
N
Code
B
Code
D
Code
E
Code
1
Code
T
U
Accuracy + 1% along measuring range, over temperature
protection 1.3 x full span.
Temperature measurement upto 600oC.
Type approval for 'Vibration' test obtained.
Gauge Type
Code
Option
Bi-Metal
Define
Refer table 3 for options
Stem Type
Process Connection(P)
Stem Location
Every angle
Code
Local mounting
T
Dial Size(mm)
Define
Well Insertion (mm)
Code
Code
Flange Material
S4
S6/L
AISI 304
AISI 316/316L
A105
ASTM A105 (CS)
F316
A182 F316
Code
Stem Material
F304
A182 F304
S6/L
AISI 316/316L
U
Define
Other materials also available.
Define grade
Code
Stem Dia
‘d’
06
6mm
7mm
08
8mm
9mm
10
OT
10mm
Define
11mm
Code
Capillary
XX
12.5
16
19
25
Well Extension (mm)
Case Material
Code
17
22
25
28
Other sizes & dimensions on request
Mounting
Code
XX
B(mm)
3/4”ANSI or DN 20
1”ANSI or DN 25
1.5”ANSI or DN 40
2”ANSI or DN 50
Rigid
100
150
4
6
B1(mm)
Code
None
Well Material
316
304
446
316SS
304SS
446SS
Code
446
Range
446SS
Define
Refer table 1 for Standard
Ranges ( 0C, F) 0
Capillary Length
None
ORDERING EXAMPLE
TG 400# Series B-D-E-1-6-S4-S6-10-xx-xx-Range-304-A105-U-T-1.5”150#RF-Op0.
GOA THERMOSTATIC INSTRUMENTS PVT. LTD.
Office: Flat B, Ground Floor, Hill Crown Apt., College Road, Mapusa - 403 507, Tel: 0832-2252719, Fax:0832-2263294 E-mail: pyroadmin@pyro-electric.in
Visit us at www.goathermostatic.in
TG400# SERIES
ZERO
RESET
"All Stainless Steel" fully welded construction.
Weather-proof casing to IP:65, IS:13947.
External zero re-set as a standard.
Hermetically sealed casing to ASME B40.3 as an option.
Dry and filled versions.
Made from Drilled bar stock.
Flanged well with Tapered shank.
Safe design as per ASME PTC19.3.
Various materials to choose from.
Option to provide velocity collar.
TG 400# Series Remote Mounted Filled System Thermometers with Flanged Thermowell.
Features
REAR FLANGE
S.S.304
CASE WITH
BAYONET BEZEL
DIAL SIZE
FLANGE (P)
2"150 # RF
STEM
ADJUSTABLE
CONNECTION
WELL
ØD
CAPILLARY
ØB1
Ød1
BULB
ØB
CPILLARY
3
8"BSP
6
1
2"BSP
Insert Gas filled or Mercury filled Thermometers.
"All Stainless Steel" fully welded construction.
Capillary length upto 20 meters.
Case compensation to SAMA class VB.
Weather-proof casing to IP:65, IS:13947.
Toughend glass standard, shatterproof glass as option.
Micro-gear pointer for zero re-set.
Dry and filled versions.
Made from Drilled bar stock.
Flanged well with Tapered shank.
Safe design as per ASME PTC19.3.
Various materials to choose from.
Option to provide velocity collar.
Performance
N
T
Accuracy + 1% along measuring range, over temperature
protection 1.3 x full span.
Temperature measurement upto 700oC.
Type approval for 'Vibration' test obtained.
U
Code
Gauge Type
M
Code
G
B
Gauge Type
Mercury-in-steel
Gas
Filled
Bi-Metal
Code
Option
Define
Refer table 3 for options
Code
Stem Type
Process Connection(P)
Code
B
Code
2
Code
4
6
Code
S4
S6
Stem Location
Bottom
Back flange for
surface mounting
Code
Dial Size(mm)
Code
T
100
150
U
AISI 304
AISI 316
A105
ASTM A105 (CS)
F316
A182 F316
F304
A182 F304
Other materials also available.
Define grade
Stem Dia
‘d’
06
6mm
7mm
08
8mm
9mm
10
OT
10mm
Other/define
11mm
Code
Capillary
C3
Define
Flange Material
Code
C2
Well Insertion (mm)
Code
AISI 316/316L
C1
Well Extension (mm)
Define
Case Material
S6/L
12.5
16
19
25
Other sizes & dimensions on request
Mounting
Stem Material
17
22
25
28
3/4”ANSI or DN 20
1”ANSI or DN 25
1.5”ANSI or DN 40
2”ANSI or DN 50
Capillary
Code
B(mm)
SS316 capillary covered
with SS316 tube,3Ø
SS316 capillary covered
with SS304 armour
SS316 capillary covered
with SS304 armour PVC
coated
Code
Well Material
316
304
446
316SS
304SS
446SS
Code
446
Range
446SS
Define
Refer table 1 for Standard
Ranges ( 0C, F) 0
Code
Capillary Length
3M
Define; e.g. 3 meters
ORDERING EXAMPLE
TG 400# Series M-C-B-2-6-S4-S6-10-C2-3M-Range-316-A105-U-T-1.5”150#RF-Op0.
TG 400# Series G-C-B-2-6-S4-S6-10-C2-3M-Range-316-A105-U-T-1.5”150#RF-Op0.
GOA THERMOSTATIC INSTRUMENTS PVT. LTD.
Office: Flat B, Ground Floor, Hill Crown Apt., College Road, Mapusa - 403 507, Tel: 0832-2252719, Fax:0832-2263294 E-mail: pyroadmin@pyro-electric.in
Visit us at www.goathermostatic.in
TG400# SERIES
C
B1(mm)
TG 430# Series Bi-Metal Temperature Gauges with Flanged Thermowell.
Features
FLANGE (P)
2"150 # RF
DIAL SIZE
WELL
S.S.316
Ø(B1)
STEM
Ød1
ØD
CAPILLARY
ØB
ADJUSTABLE
CONNECTION
ZERO
RESET
3
8"BSP
1
2"BSP
150
S.S.304 CASE WITH
BAYONET BEZEL
T=C+45
N
6
"All Stainless Steel" fully welded construction.
Weather-proof casing to IP:65, IS:13947.
External zero re-set as a standard.
Hermetically sealed casing to ASME B40.3 as an option.
Dry and filled versions.
Made from Drilled bar stock.
Flanged well with straight and Tapered shank.
Safe design as per ASME PTC19.3.
Various materials to choose from.
Performance
U
Accuracy + 1% along measuring range, over temperature
protection 1.3 x full span.
Temperature measurement upto 600oC.
Type approval for 'Vibration' test obtained.
B
Code
D
Code
E
Code
1
Code
Gauge Type
Code
Option
Bi-Metal
Define
Refer table 3 for options
Stem Type
Process Connection(P)
Stem Location
Every angle
Code
Local mounting
T
Dial Size(mm)
Define
Well Insertion (mm)
Code
Code
Flange Material
S4
S6/L
AISI 304
AISI 316/316L
A105
ASTM A105 (CS)
F316
A182 F316
Code
Stem Material
F304
A182 F304
S6/L
AISI 316/316L
U
Define
Other materials also available.
Define grade
Code
Stem Dia
‘d’
06
6mm
7mm
08
8mm
9mm
10
OT
10mm
Define
11mm
Code
Capillary
XX
12.5
16
19
25
Well Extension (mm)
Case Material
Code
17
22
25
28
Other sizes & dimensions on request
Mounting
Code
XX
B(mm)
3/4”ANSI or DN 20
1”ANSI or DN 25
1.5”ANSI or DN 40
2”ANSI or DN 50
Rigid
100
150
4
6
B1(mm)
Code
None
Well Material
316
304
446
316SS
304SS
446SS
Code
446
Range
446SS
Define
Refer table 1 for Standard
Ranges ( 0 C,0 F)
Capillary Length
None
ORDERING EXAMPLE
TG 430# Series B-D-E-1-6-S4-S6-10-xx-xx-Range-316-F316-U-T-1.5”150#RF-Op0.
GOA THERMOSTATIC INSTRUMENTS PVT. LTD.
Office: Flat B, Ground Floor, Hill Crown Apt., College Road, Mapusa - 403 507, Tel: 0832-2252719, Fax:0832-2263294 E-mail: pyroadmin@pyro-electric.in
Visit us at www.goathermostatic.in
TG430# SERIES
Code
TG 470# Series Bi-Metal Temperature Gauges with Flanged Thermowell.
Features
ADJUSTABLE
CONNECTION
REDUCER/
COUPLING
3/4"NPT
PROTECTING TUBE
END CAP WELDED TO
PROTECTING TUBE
ELEMENT
3
4"Sch160(B)
ØB
Ø(D) CAPILLARY
BULB
ZERO
RESET
3/8"BSP
6
½"NPT
Performance
S.S.304 CASE WITH
BAYONET BEZEL
N
Code
B
Code
D
Code
E
Code
1
Code
4
6
"All Stainless Steel" fully welded construction.
Weather-proof casing to IP:65, IS:13947.
External zero re-set as a standard.
Hermetically sealed casing to ASME B40.3 as an option.
Dry and filled versions.
Flanged well with Protecting tube.
Built up from seamless tubes, fixed or adjustable.
T
Accuracy + 1% along measuring range, over temperature
protection 1.3 x full span.
Temperature measurement upto 600oC.
Type approval for 'Vibration' test obtained.
U
Gauge Type
Code
Option
Bi-Metal
Define
Refer table 3 for options
Stem Type
Flange Size
Code
Rigid
½”150#RF
3/4”150#RF
1”150#RF
1.25”150#RF
1.5”150#RF
2”150#RF
Stem Location
Every angle
Mounting
½”ASA Or Dn15 150#RF
3/4”ASA or Dn20 150#RF
1”ASA or Dn25 150#RF
1.25”ASA or Dn32 150#RF
1.5”ASA or Dn40 150#RF
2”ASA or Dn50 150#RF
Define flange rating and facing
Local mounting
Code
Dial Size(mm)
T
100
150
Code
Well Extension (mm)
Define; eg: T=50
Well Insertion (mm)
Code
Case Material
S4
S6/L
AISI 304
AISI 316/316L
Code
Flange Material
Code
Stem Material
S6/L
AISI 316/316L
A105
F316
F304
ASTM A105 (CS)
ASTM A182 F316
ASTM A182 F304
U
Code
Stem Dia
‘d’
06
6mm
7mm
08
8mm
9mm
10
OT
10mm
Define
11mm
Code
Capillary
XX
Code
XX
Define; eg: U=680
Other materials also available.
Define grade
Tube Dimensions
OD x W/t
Code
10.29x2.41
1/8”Sch80
13.72x3.02
1/4”Sch80
17.15x3.18
3/8”Sch80
21.30x3.73
½”Sch80
21.30x4.75
½”Sch160
26.60x3.91
3/4”Sch80
26.60x5.53
3/4”Sch160
Other dimensions are also available.
None
Capillary Length
None
Code
446
Range
446SS
Define
Refer table 1 for Standard
Ranges ( 0 C,0 F)
ORDERING EXAMPLE
TG 470# Series B-D-E-1-6-S4-S6-10-xx-xx-Range-316-1/2” Sch80-F316-U-T-1.5”150#RF-Op0.
GOA THERMOSTATIC INSTRUMENTS PVT. LTD.
Office: Flat B, Ground Floor, Hill Crown Apt., College Road, Mapusa - 403 507, Tel: 0832-2252719, Fax:0832-2263294 E-mail: pyroadmin@pyro-electric.in
Visit us at www.goathermostatic.in
TG470# SERIES
DIAL SIZE
FLNGE(P)
2"150 # RF
TG 510# Series Bi-Metal Temperature Gauges with Weld - in Thermowell.
Features
DIAL SIZE
WELL
ØA
STEM
Ø B1
Ø D CAPILARY
BULB
ØB
ADJUSTABLE
CONNECTION
ZERO
RESET
6
3/8"BSP
1/2" NPT
N
T
U
S.S.304 CASE WITH
BAYONET BEZEL
"All Stainless Steel" fully welded construction.
Weather-proof casing to IP:65, IS:13947.
External zero re-set as a standard.
Hermetically sealed casing to ASME B40.3 as an option.
Dry and filled versions.
Made from Drilled bar stock.
Weld in well with Tapered shank.
Safe design as per ASME PTC19.3.
Various materials to choose from.
Performance
Accuracy + 1% along measuring range, over temperature
protection 1.3 x full span.
Temperature measurement upto 600oC.
Type approval for 'Vibration' test obtained.
B
Code
D
Code
E
Code
Gauge Type
Code
Option
Bi-Metal
Define
Refer table 3 for options
Stem Type
Code
Socket
A
B1
B
Rigid
20
25
32
40
20mm
25mm
32mm
40mm
26.6
33.4
42.1
48.3
22
25
33
42
16
19
25
30
00
Define A, B1, B
Code
Well Extension
T
Define
Code
Well Insertion
Stem Location
Every angle
Mounting
1
Local mounting
Code
Dial Size(mm)
4
6
100
150
U
Code
Case Material
Code
S4
S6/L
AISI 304
AISI 316/316L
W
Code
Stem Material
S6/L
AISI 316/316L
Code
06
08
10
OT
Code
XX
Stem Dia
‘d’
6mm
7mm
8mm
10mm
Define
9mm
11mm
Well Type
Weld-in
Code
Well Material
316
304
321
446
Inc8
Inc6
316SS
304SS
321SS
446SS
Incoloy 800
Inconel 600
446
Code
Range
446SS
Define
Refer table 1 for Standard
Ranges ( 0C, F) 0
Code
Capillary Length
XXXX
None
None
Capillary
None
Define
ORDERING EXAMPLE
TG 510# Series B-D-E-1-6-S4-S6-10-xx-xx-Range-316-W-U-T-25-Op0.
GOA THERMOSTATIC INSTRUMENTS PVT. LTD.
Office: Flat B, Ground Floor, Hill Crown Apt., College Road, Mapusa - 403 507, Tel: 0832-2252719, Fax:0832-2263294 E-mail: pyroadmin@pyro-electric.in
Visit us at www.goathermostatic.in
TG510# SERIES
Code
O=~
'ii'1KI~1}1j~(Q)$'ii'~'ii'~(c
~1NI$1iI}1j{U)It¥iI~INI'ii'$
Standard Ranges -Table A
1,",:'T>"p.jJ;mmDJ':;"'X'1G'f1i;'T;'..'{"i>:j;,
Range
(OC)
1'./../)'.-rgom:'e':''"-"'..a<'i1Y@.,.
Resolution
Minimum stem length (Emmel
°C/division)
60
80
100
Range
(OC)
,',.'. ....,'...'/
Resolution
Minimum Bulb length (Emm)
(OC/division)
60
80
100
120
75
65
50
"50/+ 30
2°C
160
110
60
40
-30/+50
2°C
2°C
90
85
65
-20/+60
2°C
90
85
65
-50/+50
-40/+60
2°C
2°C
120
120
85
85
50
50
35
35
"20/+80
75
65
50
-40/+40
2°C
160
110
60
40
60
35
55
35
40
25
-30/+50
2°C
160
110
60
40
-30/+70
2°
85
35
35
25
.20/+60
0/80
2°C
90
85
65
0/100
2°C
75
65
50
.,20/+80
-20/+100
2°C
2°C
50
60
35
-30/+ 170
2°C
2°C
5°C
5°C
0/120
2°C
60
55
40
0/150
2°C
50
45
35
0/160
0/200
2°C
5°C
45
35
40
35
0/250
0/300
5°C
5°C
35
0/350
0/400
0/450
0/500
5°C
10°C
10°C
10°C
0/550
10°C
-50/+50
"20/+ 100
"20/+ 180
Il
2
160
110
85
105
70
40
30
1°C
1°C
265
225
185
155
100
85
65
55
30
25
0/80
155
120
110
60
40
0/100
2°C
2°C
85
50
35
20
55
0/120
2°C
105
70
40
30
80
30
70
65
55
60
50
45
40
2°C
2°C
5°C
85
80
60
60
50
45
35
25
25
25
25
20
50
45
45
35
5°C
60
45
25
20
40
35
40
30
30
0/150
0/160
0/200
0/250
0/300
0/350
0/400
0/450
5°C
5°C
10°C
10°C
10°C
50
45
40
35
35
30
35
35
30
25
25
25
25
"'20
20
20
15
15
15
15
15
15
15
15
30
20
15
15
0/500
0/550
0/600
10°C
10°C
~lliill
None
Glycerine filling
3
Silicon Oil filling
Unit of measurement of
4
Stainless Steel tag plate
5
Electric contacts
6
Special Requirement
7
8
IBR Certification
NACE
9
PWHT
10
DP test
11
Radiography
12
Ferrite number
of wel<l,Joiht
test
.
.
Glycerine filled gauges to be used for service temperature between + 15°C to +80°C.
Silicon Oil f1lledgauges to be used for service temperature between -40°C to +250°C.
GOA THERMOSTATIC INSTRUMENTS PVT. LTD.
Works: Plot No D3115, Bichollm Ind. Estate, Bichol1m (Goa) Tel:0832-236299Ifax:
0832- 2363437, Ema!I: gtHworks@pyro-electric.com
Office: Flat 'B', Ground Floor, Hill Crown Apt, College Road, Mapuca, Goa 403 507. Tel:(0832)22527I9,
Mumbai office Tel: (022) 24467370 TeWax: (022) 24461547. E-MaH:pyromumbai@pyro-electric.com.
Visit us ai www.pyro-electric.com
50
40
35
2°C
Options - Table B
0
1
i20
160
0150
0/60
. For ranges other than those listed. please confirm
with our sales department. before ordering.
~
,,""
Printed on 15/6/2005 Rev I
Fax:(0832)2263294,
E-MaH:pyrogoa@sancharnet.in
TG110# Series Filled System Thermometers - Local Mounted
Features
Dial Size
Inert Gas filled or Mercury filled thermometers.
"All Stainless Steel" fully welded construction.
Case compensation to SAMA Class VB.
Case
50
Weather-proof casing to IP:66, IS:13947.
Toughened glass standard, shatter-proof glass optional
Micro-gear pointer for zero re-set.
Adjustable
Connection
Dry and Filled versions
‘E’mm
Designed to assemble with existing thermowells.
Performance
Stem
Accuracy + 1% along measuring range, over temperature
protection 1.3 x full span.
Bulb
Form - Rear Entry
(off-centre)
M
G
0
Temperature measurement upto 700C.
Form - Every Angle
Form - Bottom Entry
Mercury filled
Inert Gas filled
Type approval for 'Vibration' test obtained.
Define
Refer Table 3 for Options
P
M
Plain Stem
Male Nut
U
Union Nut
AM
Adjustable Male
AU
Adjustable Union
Stem Connections
S6/L
AISI 316/316L
S6/L
AISI 316/316L
OT
Other / Define
Define
Refer T able 2 for Standard
Connections
Define
Refer Table 1 for Standard
0 0
Ranges ( C, F, Dual Scale)
TG110# Series M-D-B-1-6-S4-S6-08-xx-xx-0/120-3N(1/2"NPT)-AM-E=150-Op0
GOA THERMOSTATIC INSTRUMENTS PVT. LTD.
Office: Flat B, Ground Floor, Hill Crown Apt., College Road, Mapusa - 403 507, Tel: 0832-2252719, Fax:0832-2263294 E-mail: pyroadmin@pyro-electric.in
Visit us at www.pyro-electric.in
TG120# Series Filled System Thermometers - Remote Mounted
Back flange
Dial
Dial
Features
‘U’ clamp
Inert Gas filled or Mercury filled thermometers.
"All Stainless Steel" fully welded construction.
Capillary lengths upto 20 metres.
Weather-proof casing to IP:66, IS:13947.
Adjustable
Connection
Toughened glass standard, shatter-proof glass optional
Armour
Micro-gear pointer for zero re-set.
Stem
d
Front flange
Dry and Filled versions
Designed to assemble with existing thermowells.
Dial
Insertion length’E’
Capillary
Performance
Accuracy + 1% along measuring range, over temperature
protection 1.3 x full span.
Bulb
0
Temperature measurement upto 700C.
d1
Type approval for 'Vibration' test obtained.
Form - Bottom Entry,
Board Mounted
Form - Rear Entry,
Flush Panel Mounted
Define
Refer Table 3 for Options
P
M
Plain Stem
Male Nut
U
Union Nut
AM
Adjustable Male
AU
Adjustable Union
Stem Connections
S6/L
Define
Refer Table 2 for Standard
Connections
Define
Refer Table 1 for Standard
0 0
Ranges ( C, F, Dual Scale)
AISI 316/316L
Define For eg. 2M
S6/L
OT
AISI 316/316L
Other / Define
TG120# Series M-C-R-4-6-S4-S6-10-C2-5M-0/120-3N(1/2"NPT)-AM-E=150-Op0
GOA THERMOSTATIC INSTRUMENTS PVT. LTD.
Office: Flat B, Ground Floor, Hill Crown Apt., College Road, Mapusa - 403 507, Tel: 0832-2252719, Fax:0832-2263294 E-mail: pyroadmin@pyro-electric.in
Visit us at www.pyro-electric.in
TG 310# Series Bi-Metal Temperature Gauges with Threaded Thermowell.
Features
“All Stainless Steel" fully welded construction.
Weather-proof casing to IP:65, IS:13947.
External zero re-set as a standard.
DIAL SIZE
ADJUSTABLE
CONNECTION
1"NPT
ØB1
Ød1
STEM
Hermetically sealed casing to ASME B40.3 as an option.
ØD
CAPILLARY
ZERO
RESET
6
3/8"BSP
S.S.304 CASE WITH
BAYONET BEZEL
½"NPT
N
T
Dry and filled versions.
Made from Drilled bar stock.
ØB
A/F
WELL
S.S.316
Threaded well as per EN0165.00 with Tapered shank.
Safe design as per ASME PTC19.3.
Various materials to choose from.
U
Performance
Accuracy + 1% along measuring range, over temperature
protection 1.3 x full span.
Temperature measurement upto 600oC.
Type approval for 'Vibration' test obtained.
Code
B
Code
D
Code
E
Gauge Type
Code
Option
Bi-Metal
Define
Refer table 3 for options
Stem Type
Process Connection(P)
Rigid
Stem Location
B1(mm)
B(mm)
½”NPT (M)
18
12.5
¾”NPT(M)
1”NPT(M)
22
28
19
25
Every angle
Other sizes & dimensions on request
1
Code
4
6
Mounting
Local mounting
Code
Well Extension (mm)
T
Define; eg: T=50
Dial Size(mm)
Code
100
150
U
Well Insertion (mm)
Define; eg: U=280
Code
Case Material
Code
S4
S6/L
AISI 304
AISI 316/316L
304
SS304
316
SS316
316L
SS316L
Code
Stem Material
S6/L
AISI 316/316L
Code
Stem Dia
‘d’
7mm
06
6mm
08
8mm
9mm
10
OT
10mm
Define
11mm
Well Material
Code
446
Range
446SS
Define
Refer table 1 for Standard
Ranges ( 0 C,0 F)
Code
Capillary Length
XX
Code
XX
None
Capillary
None
ORDERING EXAMPLE
TG 310# Series B-D-E-1-6-S4-S6-10-xx-xx-Range-304-U-T-3/4”NPT(M)-Op0.
GOA THERMOSTATIC INSTRUMENTS PVT. LTD.
Office: Flat B, Ground Floor, Hill Crown Apt., College Road, Mapusa - 403 507, Tel: 0832-2252719, Fax:0832-2263294 E-mail: pyroadmin@pyro-electric.in
Visit us at www.goathermostatic.in
TG310# SERIES
Code
TG 310# Series Remote Mounted Filled System Thermometers with Threaded Thermowell.
Features
REAR FLANGE
DIAL SIZE
S.S.304
CASE WITH
BAYONET BEZEL
ADJUSTABLE
CONNECTION
A/F
CPILLARY
1"NPT
ØB1
WELL
S.S.316
Ød1
STEM
ØD
CAPILLARY
ØB
BULB
6
3/8"BSP
½"NPT
N
T
U
Insert Gas filled or Mercury filled Thermometers.
"All Stainless Steel" fully welded construction.
Capillary length upto 20 meters.
Case compensation to SAMA class VB.
Weather-proof casing to IP:65, IS:13947.
Toughend glass standard, shatterproof glass as option.
Micro-gear pointer for zero re-set.
Dry and filled versions.
Made from Drilled bar stock.
Threaded well as per EN0165.00 with Tapered shank.
Safe design as per ASME PTC19.3.
Various materials to choose from.
Performance
Accuracy + 1% along measuring range, over temperature
protection 1.3 x full span.
Temperature measurement upto 700oC.
Type approval for 'Vibration' test obtained.
Code
Gauge Type
Code
Options
M
Code
G
B
Gauge Type
Mercury-in-steel
Gas
Filled
Bi-Metal
Define
Refer table 3 for options
Code
Stem Type
Code
B
Code
2
Capillary
Stem Location
B1(mm)
B(mm)
½”NPT (M)
18
12.5
¾”NPT(M)
1”NPT(M)
22
28
19
25
Other sizes & dimensions on request
Bottom
Code
Mounting
T
Back flange for
surface mounting
Code
Code
4
6
Code
S4
S6
Dial Size(mm)
U
100
150
Code
Case Material
AISI 304
AISI 316
Code
Stem Material
S6/L
AISI 316/316L
Code
446
Range
446SS
Define
Refer table 1 for Standard
Ranges ( 0 C,0 F)
Capillary Length
06
6mm
7mm
3M
Code
9mm
11mm
Well Material
SS316
Code
8mm
Define; eg: U=280
SS304
‘d’
10mm
Other/define
Well Insertion (mm)
316
Stem Dia
08
Define; eg: T=70
304
Code
10
OT
Well Extension (mm)
C1
C2
C3
Define; e.g. 3 meters
Capillary
SS316 capillary covered
with SS316 tube,3Ø
SS316 capillary covered
with SS304 armour
SS316 capillary covered
with SS304 armour PVC
coated
ORDERING EXAMPLE
TG 310# Series M-C-B-2-6-S4-S6-10-C2-3M-Range-304-U-T-3/4”NPT(M)-Op0.
TG 310# Series G-C-B-2-6-S4-S6-10-C2-3M-Range-304-U-T-3/4”NPT(M)-Op0.
GOA THERMOSTATIC INSTRUMENTS PVT. LTD.
Office: Flat B, Ground Floor, Hill Crown Apt., College Road, Mapusa - 403 507, Tel: 0832-2252719, Fax:0832-2263294 E-mail: pyroadmin@pyro-electric.in
Visit us at www.goathermostatic.in
TG310# SERIES
C
Process Connection(P)