Power wave
Product Catalog
January 2011
Table of Contents
POWERWAVE
Table of Contents
Page
Base Station Products
Power Amplifier Solutions
MCPA Modules
Single MCPA Outdoor Booster Systems
Dual MCPA Outdoor Booster Systems
Triple MCPA Outdoor Booster Systems
TMA Products
Tower Mounted Amplifiers
Power Distribution Units
Current Injectors
Filters
Same Band Combiners T1
Diplexer/Crossband Combiners
Triplexer/Crossband Combiners
Duplexers
Interference Filters
RMDU and Enclosure Solutions
MicroFlex™ Outdoor Enclosures
RapidFlex™ Outdoor Enclosures
SubTerra™ Controlled Environment Vault
VersaFlex™ Shelter Solutions
Coverage Products
Repeater Products
Channel Selective Standard Repeaters
Band Selective Compact Repeaters
Band Selective Standard Repeaters
Advanced Train Repeaters
Digital Repeaters
In-Building and Outdoor DAS Products
Public Safety Networks
Bi-Directional Amplifiers
LinkNet™ Convergence Platform
Optical and RF Conversion Modules
Tap-In® Signal Distribution Taps
Nexus™ FT – Public Safety
Commercial
Wide Band Radio Heads
Nexus FT Single and Dual Band
Nexus FT Rack Mounts
Repeater Remote Management Products
IP/SNMP/GPS Repeater Remote Management Interface
About Antenna Products
Broadband Antennas
Single Broadband Antennas
Cross Polarized
High Broadband Cross Polarized Antennas, 1710-2170 MHz
Low Broadband Cross Polarized Antennas, 806-960 MHz
Low Broadband Cross Polarized Antennas, 698-894 MHz
Vertical Polarized
ALP Broadband Vertical Polarized Antennas, 806-960 MHz
Dual Broadband Antennas
Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz
Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz
1
6
12
18
22
27
55
58
64
66
68
70
72
76
79
81
83
89
113
144
157
162
167
170
178
179
181
183
186
221
226
232
236
257
290
297
299
307
Table of Contents
POWERWAVE
Table of Contents
Page
Triple Broadband Antennas
Cross Polarized
Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz
Single and Dual Band Antennas
Single Band Antennas
Cross Polarized
ALX Cross Polarized Antennas, 806-896 MHz
X-Urban Cross Polarized Antennas, 824-896/870-960 MHz
Vertical Polarized
Omni Vertical Polarized Antennas, 806-896 MHz
Urban Vertical Polarized Antennas, 824-896/870-960 MHz
Dual Band Antennas
Cross Polarized
ALXC Cross Polarized Antennas, 870-960/1710-1880 MHz
DBB90 Cross Polarized Antennas, 824-896/1710-2170 MHz
Vertical Polarized
ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz
iRET
Low Broadband Cross Polarized iRET Antennas, 698-894MHz
Dual Broadband Cross Polarized iRET Antennas, 698-894/1710-2170MHz
Triple High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
High Broadband Cross Polarized iRET Antennas, 2300-2700MHz
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700MHz
Dual High Broadband Cross Polarized iRET Antennas, 2300-2700MHz
iDiplexer Antennas
Multi Broadband Cross Polarized Antennas
Remote Electrical Tilt (RET)
Single Band RET
Dual Band RET
Triple Band RET
iRET 8510
Master Control Unit
CILOC
RET System Cables
Indoor Antennas
Dual Band Indoor Antennas
Cross Polarized
Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz
Multiband Indoor Antennas
Vertical Polarized
Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz
Clean Site™ Solutions
Mounting Solutions
Antenna FAQ
Network Management
Part Number Index
2
318
325
327
347
355
379
390
394
408
415
422
448
452
455
458
460
464
473
482
485
488
491
498
505
510
512
515
517
523
524
526
Power wave
Base Station Products
Base Station Products
Power Amplifier Solutions
A unique combination of capabilities sets Powerwave apart
from other providers when it comes to rapidly delivering
cost-efficient base station solutions to operators & OEMs.
TMA Products
Comprehensive RF/Digital Competencies
Our engineering staff has expertise across all facets
of RF and digital signal processing. Using all of these
technological tools, we are able to create highly integrated
base station solutions. Higher integration means fewer
parts, optimum manufacturing efficiency and better value.
End-to-End System Provider
Because Powerwave is a proven provider for all categories
of wireless infrastructure solutions-from antenna products
to base station products to coverage products-you rely
on us as a single-source and consolidate/streamline your
supply chain.
Filters
Base Station Products
POWERWAVE
Base Station Products
Power Amplifier Solutions
Page
MCPA Modules
6
Single MCPA Outdoor Booster Systems
12
Dual MCPA Outdoor Booster Systems
18
Triple MCPA Outdoor Booster Systems
22
TMA Products
Tower Mounted Amplifiers
27
Power Distribution Units
55
Current Injectors
58
Filters
Same Band Combiners T1
64
Diplexer/Crossband Combiners
66
Triplexer/Crossband Combiners
68
Duplexers
70
Interference Filters
72
4
Power wave
Power Amplifier Solutions
Powerwave offers one of the industry’s largest and most
diverse line of power amplifier systems for cellular, EGSM,
DCS, PCS, AWS and UMTS wireless networks, with more
than 350,000 MCPAs and SCPAs deployed worldwide.
One key reason for this success is that we are able to
rapidly roll out new solutions by leveraging the modular
architecture of existing systems. Building upon field-proven
components and technologies, our RF engineers are
able to shorten design time and deliver systems with
industry-leading density and efficiency that drive significant
manufacturing, space and cost savings. This reduces
both capital and operating expenses.
MCPA Modules
Single MCPA Outdoor
Booster Systems
Dual MCPA Outdoor
Booster Systems
Triple MCPA Outdoor
Booster Systems
Base Station Products
POWERWAVE
MCPA Modules
Power Amplifier Solutions
MCPA Modules
Title
Range (MHz)
Air Interface
Part Number
Page
160W Multi-Carrier
Power Amplifier
850
GSM/EDGE/CDMA2000/
WCDMA
G3L-850-160
7
135W Multi-Carrier
Power Amplifier
900
GSM/EDGE/CDMA2000/
WCDMA
G3L-929-135
8
120W Multi-Carrier
Power Amplifier
1800
GSM/EDGE/CDMA2000/
WCDMA
G3L-1829-120
9
170W Multi-Carrier
Power Amplifier
1900
GSM/EDGE/CDMA2000/
WCDMA
G3L-1929-160
10
140W Multi-carrier
Power Amplifier
2100
GSM/EDGE/CDMA2000/
WCDMA
G3L-2129-140
11
6
POWERWAVE
G3L-850-160
Multi-Carrier Power Amplifiers
160W Multi-Carrier Power Amplifier
ELECTRICAL SPECIFICATIONS
Band (MHz)
850
Frequency Range (MHz)
869-894
Instantaneous Bandwidth
25
Air Interface
GSM/EDGE/CDMA2000/WCDMA
Efficiency
18%
RF Output Power
160W (Typical)
Intermodulation Distortion
-65 dBc
Harmonics
Better than -13 dBm/ 1MHz
Nominal RF Gain (dB)
63 dB ± 0.5 dB
Gain Flatness
± 0.5 dB
Gain Variation with Temperature
+/-0.5 dB
Input Return Loss
16 dB (Max)
Output Return Loss
16 dB (Max)
DC Input Voltage Range
26 to 28 Vdc (+21 to 30 Vdc Operational)
DC Input Current
Typical: 30.5A (GSM), 29 (CDMA)
Alarms and Protections
Input over power, VSWR, DC failure, High temperature, Loop failure
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
355 x 99 x 450 (1’2”x4”x1’6”)
Weight(lbs)
24.3
Connectors DC Terminal Post
N/A
Connectors RF Input
Sub-miniature Combo D connector for RF & Digital interfaces
Connectors RF Output
N/A
Connectors Alarm Output
N/A
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-33° C to 50° C
Storage Temperature Range
-40° to 70° C
Operating Humidity
0% to 80% (non condensing)
Storage Humidity
0% to 95% (non condensing)
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Updated: 2010-12-05
7
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
G3L-929-135
Multi-Carrier Power Amplifiers
135W Multi-Carrier Power Amplifier
ELECTRICAL SPECIFICATIONS
Band (MHz)
900
Frequency Range (MHz)
925-960 MHz
Instantaneous Bandwidth
25 MHz
Air Interface
GSM/EDGE/CDMA2000/WCDMA
Efficiency
19%
RF Output Power
135W (Typical)
Intermodulation Distortion
-65 dBc (Typical)
Harmonics
Better than -13 dBm/1 MHz
Nominal RF Gain (dB)
63 dB ± 0.5 dB
Gain Flatness
± 0.5 dB
Gain Variation with Temperature
± 0.5 dB
Input Return Loss
14 dB (Max)
Output Return Loss
16 dB (Max)
DC Input Voltage Range
26 to 28 Vdc (21 to 30 Vdc Operational)
DC Input Current
26A (nominal at rated power)
Alarms and Protections
Input over drive, VSWR, DC failure, High temperature, Loop failure, APC
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
355 x 99 x 450 (1’2”x4”x1’6”)
Weight(lbs)
20
Connectors DC Terminal Post
21W4 Combo-D w/size 8 contact
Connectors RF Input
21W4 Combo-D w/PkZ contact
Connectors RF Output
21W4 Combo-D w/PkZ contact
Connectors Alarm Output
21W4 combo-D
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-33 C to 50 C
Storage Temperature Range
-40 C to 70 C
Operating Humidity
5% to 95% non-condensing
Storage Humidity
5% ro 95% non-condensing
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Updated: 2010-12-06
8
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
G3L-1829-120
Multi-Carrier Power Amplifiers
120W Multi-Carrier Power Amplifier
ELECTRICAL SPECIFICATIONS
Band (MHz)
1800
Frequency Range (MHz)
1805-1880
Instantaneous Bandwidth
35
Air Interface
GSM/EDGE/CDMA2000/WCDMA
Efficiency
13.4% (GSM)
RF Output Power
Typical: 120W
Intermodulation Distortion
-65 dBc (Typical)
Harmonics
Better than -13 dBm/ 1MHz
Nominal RF Gain (dB)
63 dB +/- 0.5
Gain Flatness
+/-0.3 dB
Gain Variation with Temperature
+/-0.5 dB
Input Return Loss
17 dB (Max)
Output Return Loss
18 dB (Max)
DC Input Voltage Range
26 to 30 /Vdc (22 to 30 Vdc Operational)
DC Input Current
Typical: 33A (GSM), 31A (CDMA)
Alarms and Protections
Input over drive, VSWR, DC failure, High temperature, Loop failure, APC
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
355 x 99 x 450 (1’2”x4”x1’6”)
Weight(lbs)
23
Connectors DC Terminal Post
21W4 Combo-D w/size 8 contact
Connectors RF Input
21W4 Combo-D w/PkZ contact
Connectors RF Output
21W4 Combo-D w/PkZ contact
Connectors Alarm Output
21W4 Combo-D
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-33° C to 50° C
Storage Temperature Range
-40° to 70° C
Operating Humidity
5% to 95% (non condensing)
Storage Humidity
5% to 95% (non condensing)
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Updated: 2010-12-05
9
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
G3L-1929-160
Multi-Carrier Power Amplifiers
170W Multi-Carrier Power Amplifier
ELECTRICAL SPECIFICATIONS
Band (MHz)
PCS
Frequency Range (MHz)
1930-1995
Instantaneous Bandwidth
Up to 65
Air Interface
GSM/EDGE/CDMA2000/WCDMA
Efficiency
18.5%
RF Output Power
170 Watts (Typical)
Intermodulation Distortion
-65 dBc
Harmonics
Better than -13 dBm/ 1MHz
Nominal RF Gain (dB)
63 dB ± 0.5 dB
Gain Flatness
± 0.5 dB
Gain Variation with Temperature
+/-0.5 dB
Input Return Loss
16 dB (Max)
Output Return Loss
16 dB (Max)
DC Input Voltage Range
26 to 28 Vdc (+21 to 30 Vdc Operational)
DC Input Current
34A@170W, 33A@160W
Alarms and Protections
Input over power, VSWR, DC failure, High temperature, Loop failure
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
355 x 99 x 450 (1’2”x4”x1’6”)
Weight(lbs)
26.4
Connectors DC Terminal Post
N/A
Connectors RF Input
Sub-miniature Combo D connector for RF & Digital interfaces
Connectors RF Output
N/A
Connectors Alarm Output
N/A
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-33° C to 50° C
Storage Temperature Range
-40° to 70° C
Operating Humidity
0% to 80% (non condensing)
Storage Humidity
0% to 95% (non condensing)
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Updated: 2010-12-05
10
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
G3L-2129-140
Multi-Carrier Power Amplifiers
140W Multi-carrier Power Amplifier
ELECTRICAL SPECIFICATIONS
Band (MHz)
2100
Frequency Range (MHz)
2110-2170
Instantaneous Bandwidth
60 MHz
Air Interface
CDMA2000/WCDMA/LTE
Efficiency
> 15% (45 MHz IBW), >14% (60 MHz IBW)
RF Output Power
140W
Intermodulation Distortion
Spurious Emissions - 3GPP TS25.141 Air interface compliant.
Harmonics
-13 dBm (Max.) 1 MHz Bandwidth; -50 dBc (Max.)
Nominal RF Gain (dB)
63 dB
Gain Flatness
+/-0.5 dB
Gain Variation with Temperature
+/-0.5 dB
Input Return Loss
14
Output Return Loss
16
DC Input Voltage Range
+26 to +28 Vdc Nominal (+21 to +30 Operational)
DC Input Current
34.5A (Nominal, at 27V, 140W output)
Alarms and Protections
Input over drive, VSWR, DC failure, High temperature, Loop failure
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
355 x 99 x 500 (incl handles) (13.96” H X 3.9” W X 19.7” D)
Weight(lbs)
28.5
Connectors DC Terminal Post
21W4 Combo-D w/size 8 contact
Connectors RF Input
21W4 Combo-D w/PkZ contact
Connectors RF Output
21W4 Combo-D w/PkZ contact
Connectors Alarm Output
21W4 Combo-D
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-20° C to +50° C
Storage Temperature Range
-40° to +85° C
Operating Humidity
5% to 90% (non condensing)
Storage Humidity
5% to 90% (non condensing)
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Updated: 2010-12-05
11
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Base Station Products
POWERWAVE
Single MCPA Outdoor Booster Systems
Power Amplifier Solutions
Single MCPA Outdoor Booster Systems
Title
Range (MHz)
Air Interface
Part Number
Page
OS-1 Outdoor System
800
GSM/EDGE/CDMA2000/
WCDMA
OS-0851-P0-XXX
13
OS-1 Outdoor System
900
GSM/EDGE/CDMA2000/
WCDMA
OS-0951-P0-XXX
14
OS-1 Outdoor System
1800
GSM/EDGE/CDMA2000/
WCDMA
OS-1851-H0-XXX
15
OS-1 Outdoor System
1900
GSM/EDGE/CDMA2000/
WCDMA
OS-1951-E0-XXX
16
OS-1 Outdoor System
2100
GSM/EDGE/CDMA2000/
WCDMA
OS-2151-E0-XXX
17
12
POWERWAVE
Outdoor Booster Systems
OS-0851-P0-XXX
OS-1 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface
GSM/EDGE/CDMA/WCDMA
Frequency (MHz) Down Link
869-894
Frequency (MHz) Up Link
824-849
System Output Power
120**
IMD Specification
-65* dBc
Instantaneous Bandwidth (MHz)
Tx Gain Range (dB)
25
Rx Path Insertion Loss
2.5* (-000 version)
Supply Voltage
180-264 VAC or +27VDC
Noise Figure (dB)
2.5 @ max gain, 3.0 @ min gain* (-003 version)
Rx Gain Range
0 to +13.0 variable (-003 version)
Input Intercept Point IIP3 (dBm)
+12 min (-003 Version)
Tx Rejection In Rx Band (dB)
100 min
VSWR Alarm Threshold (dB)
7.0 (+/- 2 dB) (-003 version)
Return Loss, All Ports (dB)
15 min
Impedance All Ports (Ohms)
50
0 to +20
Misc.
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
228 X 660 X 660 (9”x 2’2 x 2’2”)
Weight(lbs)
102
RF Connectors
7/16 DIN female X 6
Number of MCPAs per Sector
1
Number of Sectors
1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-20 C to +50 C
Ingress Protection Class
IP54
Lightning Protection
20kA EIC 61000-4-5, 8/20us waveform
ORDERING INFORMATION
Model Number
Description
Quantity
930-00018-009 (optional)
3 KW Rectifier
1
160W MCPA Module
1
Enclosure -TMA model
Enclosure - LNA model with VSWR
monitor
1
MCPA Modules:
G3L-850-160
Choose one of the following
Enclosures:
OS-0851-P0-000
OS-0851-P0-003
1
* Typical Performance. ** Typical, with G3L-850-160 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave
representative for complete performance data.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-08-26
13
POWERWAVE
Outdoor Booster Systems
OS-0951-P0-XXX
OS-1 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface
GSM/EDGE
Frequency (MHz) Down Link
925-960
Frequency (MHz) Up Link
880-915
System Output Power
100 Watts**
IMD Specification
Spurious Emissions - 3GPP TS45.005 & TS25.141 Air Interface Compliant
Instantaneous Bandwidth (MHz)
Tx Gain Range (dB)
35
Rx Path Insertion Loss
2 dB* (-100 model)
Supply Voltage
94-264 VAC (Single Phase) or +27VDC
Noise Figure (dB)
2.5* @ max. gain, 3.5* @ min. gain (-103 version)
Rx Gain Range
0 to +14.0 variable (-100 model)
Input Intercept Point IIP3 (dBm)
> 0 dBm
Tx Rejection In Rx Band (dB)
100 min.
VSWR Alarm Threshold (dB)
0-10 dB output RL
Return Loss, All Ports (dB)
14 min.
Impedance All Ports (Ohms)
50
Optional modem for remote monitoring. Local configurability and alarm status through USB or Ethernet
interface. Remote access through DHCP client via rear Ethernet port.
Misc.
0 to +20.0 variable
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
620 X 284 X 716 (24.4”x 11.18” x 28.18”)
Weight(lbs)
50 Kg (110 lbs)
RF Connectors
7/16 DIN Female X 4
Number of MCPAs per Sector
1
Number of Sectors
1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-30 to +50
Ingress Protection Class
IP54
Lightning Protection
40kA per line, 8/20 us waveform
ORDERING INFORMATION
Model Number
Description
Quantity
Choose one enclosure:
OS-0951-P0-104
OS-0951-P0-103
1 sector, with LNA, includes rectifier and
modem
1 sector, with LNA, includes rectifier
1
1
Amplifier Module:
G3L-929-135
135W MCPA Module
1
* Typical Performance. ** Typical, with G3L-929-135 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave
representative for complete performance data.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-07-20
14
POWERWAVE
Outdoor Booster Systems
OS-1851-H0-XXX
OS-1 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface
GSM/EDGE/CDMA/WCDMA
Frequency (MHz) Down Link
1805-1880
Frequency (MHz) Up Link
1710-1785
System Output Power
90** Watts
IMD Specification
-65* dBc
Instantaneous Bandwidth (MHz)
Tx Gain Range (dB)
45
Rx Path Insertion Loss
2dB* (-000 version)
Supply Voltage
94-264 VAC (Single Phase, 47-63Hz) or +27VDC
Noise Figure (dB)
2.3* @ max. Gain, 1.89* @ min. Gain
Rx Gain Range
0 to +13.0 variable (-003 version)
Input Intercept Point IIP3 (dBm)
+12 min.
Tx Rejection In Rx Band (dB)
100 min.
0 to +14
VSWR Alarm Threshold (dB)
Return Loss, All Ports (dB)
15 min.
Impedance All Ports (Ohms)
50
Misc.
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
610 X 284 X 716 (24”x 11” x 28”)
Weight(lbs)
102
RF Connectors
7/16 DIN Female X 6
Number of MCPAs per Sector
1
Number of Sectors
1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-20 C to +50 C
Ingress Protection Class
IP54
Lightning Protection
20kA EIC 61000-4-5, 8/20 us waveform
ORDERING INFORMATION
Model Number
Description
Quantity
G3L-1829-120
120W MCPA module
1
1
Choose one of:
OS-1851-H0-000
OS-1851-H0-003
Enclosure - TMA model - DC transparency
Enclosure - LNA model - includes VSWR
monitor, lightning arrestors
1
1
* Typical Performance. ** Typical, with G3L-1829-120 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave
representative for complete performance data.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-06-10
15
POWERWAVE
Outdoor Booster Systems
OS-1951-E0-XXX
OS-1 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface
GSM, EDGE,CDMA,WCDMA
Frequency (MHz) Down Link
1930-1990
Frequency (MHz) Up Link
1850-1910
System Output Power
125** Watts
IMD Specification
-65 dBc
Instantaneous Bandwidth (MHz)
Tx Gain Range (dB)
65
Rx Path Insertion Loss
2 dB (-100 series)
Supply Voltage
94-264 VAC (Single Phase, 47-63 Hz), or +27 VDC
Noise Figure (dB)
2.5 dB max (all models except -100)
Rx Gain Range
0 to +14 dB (all models except -100)
Input Intercept Point IIP3 (dBm)
> 0 dBm
Tx Rejection In Rx Band (dB)
100 dB min
VSWR Alarm Threshold (dB)
0-10 dB output RL
Return Loss, All Ports (dB)
14 dB min
Impedance All Ports (Ohms)
50
Optional modem for remote monitoring. Local configurability and alarm status through USB or Ethernet
interface. Remote access through DHCP client via rear Ethernet port.
Misc.
0 to +20 variable
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
620 X 284 X 716 (24.4”x 11.18” x 28.18”)
Weight(lbs)
110 (50 Kg)
RF Connectors
7/16 DIN Female X 6
Number of MCPAs per Sector
1
Number of Sectors
1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-30 C to +50 C
Ingress Protection Class
IP54
Lightning Protection
40 KA per line, 8/20 us WF
ORDERING INFORMATION
Model Number
Description
Quantity
1 sector, with LNA, includes rectifier
1
160W 1900 MHz MCPA
1
Enclosures (Select one):
OS-1951-E0-102
MCPA Module
G3L-1929-160
Alternatively, select a Kit:
INST-OS-1951-103
Kit includes:
G3L-1929-160 amplifier module
1
OS-1951-E0-102 enclosure
1
* Typical Performance** Typical, with G3L-1929-160 inserted, 45 MHz IBWAll specifications are subject to change without notice. Contact your Powerwave representative
for complete performance data.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-07-20
16
POWERWAVE
Outdoor Booster Systems
OS-2151-E0-XXX
OS-1 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface
GSM,EDGE,CDMA,WCDMA
Frequency (MHz) Down Link
2110-2155 (AWS, -4XX series), 2110-2170 (UMTS, -1XX series)
Frequency (MHz) Up Link
1710-1755 (AWS, -4XX series), 1920-1980 (UMTS, -1XX series)
System Output Power
100W**
IMD Specification
Spurious Emissions - 3GPP TS25.141 Air interface compliant.
Instantaneous Bandwidth (MHz)
Tx Gain Range (dB)
45 (AWS, -4XX series) 60 (UMTS,-1XX series)
Rx Path Insertion Loss
2 dB (-100,-400 models)
Supply Voltage
94-264 VAC (Single Phase, 47-63 Hz), or +27 VDC
Noise Figure (dB)
2.5 dB max (-101,-401 models)
Rx Gain Range
0 to +14 dB adjustable (-101,-401 models)
Input Intercept Point IIP3 (dBm)
>0 dBm
Tx Rejection In Rx Band (dB)
100dB min.
VSWR Alarm Threshold (dB)
0-10 dB output RL (selectable)
Return Loss, All Ports (dB)
14 dB min.
Impedance All Ports (Ohms)
50
Optional modem for remote monitoring, local configurability and alarm status through USB or Ethernet
interface. Remote access through DHCP client via Rear Ethernet port.
Misc.
0 to +20 variable
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
620 X 284 X 716 (24.4”x 11.18” x 28.18”)
Weight(lbs)
110 (50 Kg)
RF Connectors
7/16 DIN Female X 4
Number of MCPAs per Sector
1
Number of Sectors
1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-30 C to +50 C
Ingress Protection Class
IP54
Lightning Protection
40kA per line, 8/20 us WF
ORDERING INFORMATION
Model Number
Description
Quantity
Enclosures (select one)
OS-2151-E0-101
OS-2151-E0-104
OS-2151-E0-401
OS-2151-E0-404
LNA model - UMTS (Band Class 1)
w/rectifier
LNA model - UMTS (Band Class 1)
w/rectifier and modem
LNA model - AWS (Band Class 4)
w/rectifier
LNA model - AWS (Band Class 4)
w/rectifier and modem
1
1
1
1
MCPA Module:
G3L-2129-140
140W MCPA module
1
** Typical, with G3L-2129-140 MCPA Module InsertedAll specifications are subject to change without notice. Contact your Powerwave representative for complete
performance data.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-07-20
17
Base Station Products
POWERWAVE
Dual MCPA Outdoor Booster Systems
Power Amplifier Solutions
Dual MCPA Outdoor Booster Systems
Title
Range (MHz)
Air Interface
Part Number
Page
OS-2 Outdoor System
900
GSM/EDGE/CDMA2000/
WCDMA
OS-0921-V0-XXX
19
OS-2 Outdoor System
1800
GSM/EDGE/CDMA2000/
WCDMA
OS-1821-H0-XXX
20
OS-2 Outdoor System
1900
GSM/EDGE/CDMA2000/
WCDMA
OS-1921-H0-XXX
21
18
POWERWAVE
Outdoor Booster Systems
OS-0921-V0-XXX
OS-2 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface
EGSM/EDGE
Frequency (MHz) Down Link
925-960
Frequency (MHz) Up Link
880-915
System Output Power
180** Watts
IMD Specification
-65* dBc
Instantaneous Bandwidth (MHz)
Tx Gain Range (dB)
25
Rx Path Insertion Loss
2dB*(-000 variant), 0.5dB*dB (bypass mode)
Supply Voltage
180-264 VAC, 47-63 Hz Single Phase, or +27VDC
Noise Figure (dB)
2.5* @ max. Gain, 3.5* @ min. Gain (-001 and -003 variants)
Rx Gain Range
0 to +11.0 variable (-001 and -003 variants)
Input Intercept Point IIP3 (dBm)
+12 min.
Tx Rejection In Rx Band (dB)
90 min.
VSWR Alarm Threshold (dB)
9.5 (+/-2dB) (-003 variant)
Return Loss, All Ports (dB)
14 min.
Impedance All Ports (Ohms)
50
1 MCPA Module 0 to 17.5, 2 MCPA Module 0 to 20.5
Misc.
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
407 x 865 x 840 (1’4”x 2’10”x 2’9”)
Weight(lbs)
151-183
RF Connectors
7/16 DIN Female X 4
Number of MCPAs per Sector
1 or 2
Number of Sectors
1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-20 to +50
Ingress Protection Class
IP54
Lightning Protection
20kA EIC 61000-4-5, 8/20 us waveform
ORDERING INFORMATION
Model Number
Description
Quantity
G3L-929-135
135W MCPA module
1-2
1001308
Rectifier
2-3
Choose one of the following
Enclosures:
OS-0921-V0-010
OS-0921-V0-011
OS-0921-V0-013
Enclosure - TMA model - 12V supply to
TMA
Enclosure - LNA model
Enclosure - LNA model with VSWR
monitor
1
1
1
* Typical ** Typical, with two G3L-929-135 modules installed. All specifications are subject to change without notice. Contact your Powerwave representative for complete
performance data.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-06-10
19
POWERWAVE
Outdoor Booster Systems
OS-1821-H0-XXX
OS-2 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface
GSM/EDGE
Frequency (MHz) Down Link
1805-1880
Frequency (MHz) Up Link
1710-1785
System Output Power
160** Watts
IMD Specification
-65* dBc
Instantaneous Bandwidth (MHz)
Tx Gain Range (dB)
35
Rx Path Insertion Loss
2.5dB*, 0.5dB* (bypass)
Supply Voltage
180-264 VAC, 47-63 Hz Single Phase, or +27VDC
Noise Figure (dB)
2.5* @ max. Gain, 3.5* @ min. Gain (-001 version)
Rx Gain Range
0 to +12.0 variable (-001 version)
Input Intercept Point IIP3 (dBm)
+12dBm min.
Tx Rejection In Rx Band (dB)
100 min.
VSWR Alarm Threshold (dB)
N/A
Return Loss, All Ports (dB)
14 min
Impedance All Ports (Ohms)
50
Misc.
N/A
1 MCPA Module 0 to +12, 2 MCPA Module 0 to +15
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
407 x 865 x 840 (1’4”x 2’10”x 2’9”)
Weight(lbs)
151-183
RF Connectors
7/16 DIN Female X 4
Number of MCPAs per Sector
2
Number of Sectors
1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-20 C to +50 C
Ingress Protection Class
IP54
Lightning Protection
20kA EIC 61000-4-5, 8/20 us waveform
ORDERING INFORMATION
Model Number
Description
Quantity
G3L-1829-120
120W MCPA Module
1-2
1001308
AC Rectifier
2-3
Choose one of the following
Enclosures:
OS-1821-H0-004
TMA Model - 12VDC supply to TMA
1
OS-1821-H0-005
LNA Model
1
* Typical ** Typical, with two G3L-1829-120 modules installed. All specifications are subject to change without notice. Contact your Powerwave representative for
complete performance data.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-06-10
20
POWERWAVE
Outdoor Booster Systems
OS-1921-H0-XXX
OS-2 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface
GSM/EDGE/CDMA/WCDMA
Frequency (MHz) Down Link
1930-1990
Frequency (MHz) Up Link
1850-1910
System Output Power
160** Watts
IMD Specification
-65* dBc
Instantaneous Bandwidth (MHz)
Tx Gain Range (dB)
45/60
Rx Path Insertion Loss
2.5*
Supply Voltage
180-264 VAC, 47-63 Hz Single Phase, or +27VDC
Noise Figure (dB)
N/A
Rx Gain Range
N/A
Input Intercept Point IIP3 (dBm)
N/A
Tx Rejection In Rx Band (dB)
100 dB min
VSWR Alarm Threshold (dB)
N/A
Return Loss, All Ports (dB)
14dB min.
Impedance All Ports (Ohms)
50
1 MCPA Module 0 to +12, 2 MCPA Modules 0 to +15
Misc.
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
407 x 863 x 838 (16”x 34”x 33”)
Weight(lbs)
151-183
RF Connectors
7/16 DIN Female X 8
Number of MCPAs per Sector
2
Number of Sectors
1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-20 C to +50 C
Ingress Protection Class
IP54
Lightning Protection
20kA EIC 61000-4-5, 8/20 us waveform
ORDERING INFORMATION
Model Number
Description
Quantity
930-00018-009
3 KW rectifier
Enclosure - TMA model - DC transparency
or TMA bias Function
(configurable)
1-2
120W MCPA module
1-2
OS-1921-H0-000
Compatible with MCPA
Module:
G3L-1929-120
1
* Typical ** Typical, output power at antenna port with 2 G3L-1929-120 modules installed, 45 MHz IBW. All specifications are subject to change without notice. Contact
your Powerwave representative for complete performance data.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-06-10
21
Base Station Products
POWERWAVE
Triple MCPA Outdoor Booster Systems
Power Amplifier Solutions
Triple MCPA Outdoor Booster Systems
Title
Range (MHz)
OS-3 3 Sector Outdoor
System
1900
OS-3 Outdoor System
OS-3 3 Sector Outdoor
System
Air Interface
Part Number
Page
GSM/EDGE/CDMA2000/
WCDMA
OS-1933-E0-XXX
23
1900
GSM/EDGE/CDMA2000/
WCDMA
OS-1991-H0-XXX
24
2100
GSM/EDGE/CDMA2000/
WCDMA
OS-2133-E0-XXX
25
22
POWERWAVE
Outdoor Booster Systems
OS-1933-E0-XXX
OS-3 3 Sector Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface
GSM/EDGE/CDMA2000/WCDMA
Frequency (MHz) Down Link
1930-1995
Frequency (MHz) Up Link
1850-1915
System Output Power - GSM/EDGE/WCDMA
150 W*
System Output Power - CDMA/CDMA 2000
150 W**
IMD Specification
-65 dBc*
Instantaneous Bandwidth (MHz)
Tx Gain Range (dB)
65 (with G3L-1929-160 module)
Rx Path Insertion Loss
0.5dB* (RF Bypass Mode)
Supply Voltage
180-264 VAC, -48VDC (-103 model)
Noise Figure (dB)
2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain)*
Rx Gain Range
0-12 dB
Input Intercept Point IIP3 (dBm)
0.0
Tx Rejection In Rx Band (dB)
100
VSWR Alarm Threshold (dB)
Adjustable
Return Loss, All Ports (dB)
14
Impedance All Ports (Ohms)
50
0-17 Variable
Misc.
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
16” W x 40” H x 38” D
Weight(lbs)
385 (175 kg)
RF Connectors
7/16 DIN-F, N-F
Number of MCPAs per Sector
1
Number of Sectors
3
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-20 °C to +50 °C
Ingress Protection Class
IP55
Lightning Protection
20kA EIC 61000-4-5, 8/20 uS Waveform
ORDERING INFORMATION
Model Number
OS-1933-E0-003
OS-1933-E0-103
OS-1933-E0-001
INST-1933-E0-001
Description
OS-3, 1900 MHz, Trident 3 Sector, 3I/3O
Includes:
G3L-1929-160 modules
Quantity
RF Conditioning Units (RFCU)
3
220VAC Rectifiers
4
-48VDC version of OS-1933-E0-003
Includes four -48VDC rectifiers instead of
220VAC rectifiers
OS-3, 1900 MHz, Trident 1 Sector, 3I/3O
Includes:
G3L-1929-160 module
1
3
1
1
RF Conditioning Unit (RFCU)
1
220VAC Rectifiers
2
1 Sector Upgrade Kit
Includes:
G3L-1929-160 module
1
RF Conditioning Unit (RFCU)
1
220VAC Rectifier
1
* Typical Performance** Typical Performance with G3L-1929-160-001 MCPA Module Inserted, specifications are subject to change without notice. Contact your
Powerwave representative for complete performance data.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-05
23
POWERWAVE
Outdoor Booster Systems
OS-1991-H0-XXX
OS-3 Outdoor System
ELECTRICAL SPECIFICATIONS
Air Interface
GSM/EDGE/CDMA2000/WCDMA
Frequency (MHz) Down Link
1930-1995
Frequency (MHz) Up Link
1850-1915
System Output Power
335** Watts
IMD Specification
-65* dBc
Instantaneous Bandwidth (MHz)
Tx Gain Range (dB)
45/65
Rx Path Insertion Loss
3.0 max (-003, -103, -200 versions)
Supply Voltage
-36 to -60VDC (-103 version), 180-264VAC (-003,-004 versions),+26-28VDC (-200 version)
Noise Figure (dB)
2.5 at max Rx gain (-004 version)
Rx Gain Range
0-12 dB in 1 dB increments (-004 version only)
Input Intercept Point IIP3 (dBm)
0.0 (-004 version only)
Tx Rejection In Rx Band (dB)
100 min
VSWR Alarm Threshold (dB)
N/A
Return Loss, All Ports (dB)
14 min.
Impedance All Ports (Ohms)
50
Remotely configurable via web GUI, accessible via Ethernet interface. TMA bias support through PDU
functionality. DC bypass configurability on -004 version.
Misc.
duplex/simplex: 3 MCPA’s: 0.0 to +16.2/17.0, 2 MCPA’s: 0 to 14.4/15.2, 1 MCPA: 0 to +11.4/12.2
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
405 x 774 x 864 (1’4”x 2’6”x 2’10”)
Weight(lbs)
255 lbs, fully populated, with 3 MCPA modules
RF Connectors
7/16 DIN Female
Number of MCPAs per Sector
3
Number of Sectors
1
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-20 C to +50 C
Ingress Protection Class
IP55
Lightning Protection
20kA EIC 61000-4-5, 8/20 us waveform
ORDERING INFORMATION
Model Number
Description
Quantity
G3L-1929-160
160W MCPA module
1-3
G3L-1929-120
120W MCPA module
1-3
1
OS-1991-H0-103
220 VAC Enclosure - TMA model
220 VAC Enclosure - LNA with DC bypass
option for TMA bias
-48 VDC Enclosure - TMA model
OS-1991-H0-200
+27 VDC Enclosure - TMA model
1
Choose one of:
Choose one of:
OS-1991-H0-003
OS-1991-H0-004
1
1
* Typical performance**Typical, with 3 G3L-1929-160 modules, 45 MHz IBW.All specifications are subject to change without notice. Contact your Powerwave
representative for complete performance data.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-05
24
POWERWAVE
Outdoor Booster Systems
OS-2133-E0-XXX
OS-3 3 Sector Outdoor System (Preliminary)
ELECTRICAL SPECIFICATIONS
Air Interface
GSM/EDGE/CDMA2000/WCDMA
Frequency (MHz) Down Link
2110-2170 (UMTS, -X1X series), 2110-2155 (AWS, -X4X series)
Frequency (MHz) Up Link
1920-1980 (UMTS, -X1X series), 1710-1755 (AWS, -X4X series)
System Output Power - GSM/EDGE/WCDMA
105W**
System Output Power - CDMA/CDMA 2000
105W**
IMD Specification
-65 dBc*
Instantaneous Bandwidth (MHz)
Tx Gain Range (dB)
60 (UMTS, -X1X series) 45 (AWS, -X4X series)
Rx Path Insertion Loss
0.5dB* (RF Bypass Mode)
Supply Voltage
180-264 VAC (-0XX series), -48VDC (-1XX series)
Noise Figure (dB)
2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain)
Rx Gain Range
0-12 dB
Input Intercept Point IIP3 (dBm)
0.0
Tx Rejection In Rx Band (dB)
100
VSWR Alarm Threshold (dB)
adjustable
Return Loss, All Ports (dB)
14
Impedance All Ports (Ohms)
50
Misc.
Enclosure is multiband capable (any mix of 1900, 2100 MHz)
0-17 Variable
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
16” W x 40” H x 38” D
Weight(lbs)
385 (175 kg)
RF Connectors
7/16 DIN-F, N-F
Number of MCPAs per Sector
1
Number of Sectors
3
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range
-20 °C to +50 °C
Ingress Protection Class
IP55
Lightning Protection
20kA EIC 61000-4-5, 8/20
ORDERING INFORMATION
Model Number
Description
Quantity
OS-2133-E0-013
Enclosure: 3I3O, UMTS (Band 1),220 VAC
1
OS-2133-E0-043
Enclosure: 3I3O, AWS (Band 4),220 VAC
1
OS-2133-E0-113
Enclosure: 3I3O, UMTS (Band ),-48 VDC
1
OS-2133-E0-143
Enclosure: 3I3O, AWS (Band 4),-48VDC
1
Models above include:
OS-2133-E0-041
INST-2133-E0-041
G3L-2129-140 amplifier modules
3
Frequency-specific RF Conditioning Units
3
220 VAC Rectifiers (AC enclosures only)
4
Enclosure: 3I3O, AWS (Band 4), 220 VAC
1
Incl: G3L-2129-140 amplifier module
1
AWS RF Conditioning Unit
1
220VAC Rectifiers
AWS Upgrade Kit, includes:
G3L-2129-140 amplifier module
AWS RF Conditioning Unit
2
220 VAC Rectifier
1
1
1
* Typical Performance** Typical, with G3L-2130-140 MCPA Module Inserted, 45 MHz IBW
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-05
25
Power wave
TMA Products
Tower Mounted Amplifiers
Powerwave offers one of the most extensive tower mounted
amplifier (TMA) product portfolios, including single, twin
and dual band TMAs. Our TMA design offers a low noise
amplifier design that provides superior receive system
performance and reliability. Powerwave TMAs are designed
for the harshest environments to include desert and polar
climates and extreme environments such as rain forests.
Powerwave TMAs are also part of the Powerwave Clean
Site™ Solutions which provides multiple benefits such as
reduced installation cost, reuse of existing building permits
and reduced visual impact to base stations.
Tower Mounted
Amplifiers
Power Distribution Units
Current Injectors
Base Station Products
POWERWAVE
Tower Mounted Amplifiers
TMA Products
Tower Mounted Amplifiers
TMA Type
Up-Link (MHz)
Down-Link (MHz)
Part Number
Page
TMA Twin 800 AISG
824-849
869-894
24501, 24511
29
TMA-DD Twin 2100 15 MHz
1969.7-1984.7
2110-2170
010-11177-0214
30
TMA-DD Twin 2100 15 MHz
1920.5-1935.5
2110-2170
010-11182-02nn
31
TMA-DD Twin 2100 15 MHz
1964.9-1979.9
2110-2170
010-11183-02nn
32
TMA-DD Twin 2100 15 MHz
1950-1965
2110-2170
010-50025-0232
33
TMA Twin 900 AISG
890-915
935-960
25001, 25011
34
TMA Twin 900 AISG
880-908
925-953
25002, 25012
35
TMA Twin 900 AISG
890-915
935-960
25014, 25016
36
TMA Single 900 AISG
890-915
935-960
25101, 25111
37
TMA Single 900 AISG
890-915
935-960
25102, 25112
38
TMA Single 900 AISG
890-915
935-960
25103, 25113
39
TMA-DD EGSM
880-915
925-960
LGP192nn
40
TMA-DD 850 MHz SMR
Rejection
824-849
869-894
LGP174nn
41
TMA-DD 1900
1850-1910
1930-1990
LGP175nn
42
TMA-DD 1800 Twin AISG 2.0 1710-1785
1805-1880
LGP18520,
LGP18521
43
TMA-DD 1800 Twin AISG 2.0 1710-1785
1805-1880
LGP185nn
44
TMA-DD 1900 Twin
1930-1990
LGP186nn
45
1850-1910
27
Base Station Products
POWERWAVE
Tower Mounted Amplifiers
TMA Products
Tower Mounted Amplifiers
TMA Type
Up-Link (MHz)
Down-Link (MHz)
Part Number
TMA-DD Micro Twin
2100
1920-1980
2110-2170
LGP215nn
46
TMA Dual Band AWS
with 700 Bypass
1710-1770 with 698-746
bypass
2110-2170 with 698746 bypass
TSAW-07BP111-001
47
TMA Twin Dual Band 1710-1770 with 698-746
AWS with 700 Bypass bypass
2110-2170 with 698746 bypass
TTAW-07BP111-001
48
TMA Micro Twin AWS 1710-1755
2110-2155
TTAW-0000112-001
49
TMA Micro Twin AWS 1710-1770
2110-2170
TTAW-60BW111-001
50
TMA Dual Band
700/AWS
698-716 MHz and 17101770 MHz
728-746 and 21102170
TS07-AWDB111-001
51
TMA Twin 850/1900
Dual Band
824-849 /1850-1910
869-894 /1930-1990
TT08-19DB111-001
52
TMA Twin 1900 with
850 Bypass
1850-1910 with 824-894
bypass
1930-1990 with 824894 bypass
TT19-08BP111-001
53
ACTIVE UGC 900
890-915
935-960
TU09-000001n-001
54
28
Page
POWERWAVE
24501, 24511
Tower Mounted Amplifiers
TMA Twin 800 12 dB SL AISG
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
824-849
UL Rejection
>82 dB
UL Gain(dB)
12
UL Return Loss
>18 dB
UL Noise Figure
1.4 dB, Typical
UL Output 3rd Order Intercept Point(dBm)
+25, Typical
UL Bypass Loss(dB)
2.0 dB, Typical
UL Max Input Power (dBm)
+10 dBm
DL Frequency Range (MHz)
869-894
DL Return Loss
>18 dB
DL Insertion Loss (dB)
0.4, Typical
Intermodulation
<-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V)
Alarm Functionality
AISG Mode: 10-30; Current alarm mode: 8.5 -17
AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current
Power Consumption
@12 VDC, 1.5W per LNA
Power Handling, RMS
AISG Compatibility
>53.5 dBm
24501 AISG 1.1 (Field upgradable to AISG 2.0); 24511 AISG 2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
228x169x120 (9”x6.7”x4.8”)
Weight(lbs)
<6 kg (13.2 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 Female
Mounting Kit
Mounting kit for pole and wall included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40°C to +65°C (-40°F to +149°F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-1
Lightning Protection
3 kA 10/350 µs, 8kA 8/20 µs, 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours per TMA
Ingress Protection
IP68
APPROVAL AND TESTS
Safety
EN60950, UL 1950, ETL
EMC
ETS 300 342-3
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Rev A
Updated: 2010-02-04
29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
010-11177-0214
Tower Mounted Amplifiers
Tower Mounted Amplifier
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
1969.7-1984.7
UL Rejection
3 dBc Bandwidth = 30MHz; 10 dBc Bandwidth = 40MHz; 50 dBc Bandwidth = 55MHz
UL Gain(dB)
12
UL Return Loss
> 18 dB
UL Noise Figure
Typical 1.2 dB, Max 1.7 dB
UL Output 3rd Order Intercept Point(dBm)
> +23
UL Bypass Loss(dB)
<1.8 Typical. 3.7 Max
UL Max Input Power (dBm)
+10
DL Frequency Range (MHz)
2110-2170
DL Return Loss
> 18 dB
DL Insertion Loss (dB)
Max 0.4
Intermodulation
<-128 dBm in Rx Band (2 Tx Carriers at +43 dBm)
Input Voltage (V)
Alarm Functionality
AISG mode: 10 - 30; CWA mode: 8.5 - 15
Alarm Current: 250 mA
Power Consumption
Typical 1.3W per TMA (2.5 W Total)
Power Handling, RMS
AISG Compatibility
52 dBm CW; 62 dBm peak
2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
340x171x70 mm (13.4x6.7x2.8 inch)
Weight(lbs)
<4.5 Kg (9.9)
Colors
Off white (NCS 1502-R)
RF Connectors
7/16 Female
Mounting Kit
Hose Clamps Included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40°C to +65°C (-40°F to +149°F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-1
Lightning Protection
3 kA 10/350 µs; 20 kA (Shield)
Housing
Aluminum
MTBF
>350.000 Hours
Ingress Protection
IP 68
APPROVAL AND TESTS
Safety
EN 60950
EMC
ETS 125 113
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Updated: 2009-05-05
30
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
010-11182-02nn
Tower Mounted Amplifiers
Tower Mounted Amplifier
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
1920.5-1935.5
UL Rejection
3 dBc Bandwidth = 30MHz; 10 dBc Bandwidth = 40MHz; 50 dBc Bandwidth = 55MHz
UL Gain(dB)
12
UL Return Loss
> 18 dB
UL Noise Figure
Typical 1.2 dB, Max 1.7 dB
UL Output 3rd Order Intercept Point(dBm)
> +23
UL Bypass Loss(dB)
<1.8 Typical. 3.7 Max
UL Max Input Power (dBm)
+10
DL Frequency Range (MHz)
2110-2170
DL Return Loss
> 18 dB
DL Insertion Loss (dB)
Max 0.4
Intermodulation
<-128 dBm in Rx Band (2 Tx Carriers at +43 dBm)
Input Voltage (V)
Alarm Functionality
AISG mode: 10 - 30; CWA mode: 8.5 - 15
Alarm Current -0202: 250 mA
Power Consumption
Typical 1.3W per TMA (2.5 W Total)
Power Handling, RMS
AISG Compatibility
52 dBm CW; 62 dBm peak
2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
340x171x70 mm (13.4x6.7x2.8 inch)
Weight(lbs)
<4.5 Kg (9.9)
Colors
Off white (NCS 1502-R)
RF Connectors
7/16 Female
Mounting Kit
Hose Clamps Included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40°C to +65°C (-40°F to +149°F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-11
Lightning Protection
3 kA 10/350 µs; 20 kA (Shield)
Housing
Aluminum
MTBF
>350.000 Hours
Ingress Protection
IP68
APPROVAL AND TESTS
Safety
EN 60950
EMC
ETS 125 113
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Updated: 2009-05-05
31
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
010-11183-02nn
Tower Mounted Amplifiers
Tower Mounted Amplifier
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
1964.9-1979.9
UL Rejection
3 dBc Bandwidth = 30MHz; 10 dBc Bandwidth = 40MHz; 50 dBc Bandwidth = 55MHz
UL Gain(dB)
12
UL Return Loss
> 18 dB
UL Noise Figure
Typical 1.2 dB, Max 1.7 dB
UL Output 3rd Order Intercept Point(dBm)
> +23
UL Bypass Loss(dB)
<1.8 Typical. 3.7 Max
UL Max Input Power (dBm)
+10
DL Frequency Range (MHz)
2110-2170
DL Return Loss
> 18 dB
DL Insertion Loss (dB)
Max 0.4
Intermodulation
<-128 dBm in Rx Band (2 Tx Carriers at +43 dBm)
Input Voltage (V)
Alarm Functionality
AISG mode: 10 - 30; CWA mode: 8.5 - 15
Alarm Current -0202: 250 mA; -0232: 180 mA
Power Consumption
Typical 1.3W per TMA (2.5 W Total)
Power Handling, RMS
AISG Compatibility
52 dBm CW; 62 dBm peak
2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
340x171x70 mm (13.4x6.7x2.8 inch)
Weight(lbs)
<4.5 Kg (9.9)
Colors
Off white (NCS 1502-R)
RF Connectors
7/16 Female
Mounting Kit
Hose Clamps Included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40°C to +65°C (-40°F to +149°F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-1
Lightning Protection
3 kA 10/350 µs; 20 kA (Shield)
Housing
Aluminum
MTBF
>350.000 Hours
Ingress Protection
IP68
APPROVAL AND TESTS
Safety
EN 60950
EMC
ETS 125 113
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Updated: 2009-09-21
32
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
010-50025-0232
Tower Mounted Amplifiers
Tower Mounted Amplifier
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
1950-1965
UL Rejection
3 dBc Bandwidth = 30MHz; 10 dBc Bandwidth = 40MHz; 50 dBc Bandwidth = 55MHz
UL Gain(dB)
12
UL Return Loss
> 18 dB
UL Noise Figure
Typical 1.2 dB, Max 1.7 dB
UL Output 3rd Order Intercept Point(dBm)
> +23
UL Bypass Loss(dB)
<1.8 Typical. 3.7 Max
UL Max Input Power (dBm)
+10
DL Frequency Range (MHz)
2110-2170
DL Return Loss
> 18 dB
DL Insertion Loss (dB)
Max 0.4
Intermodulation
<-128 dBm in Rx Band (2 Tx Carriers at +43 dBm
Input Voltage (V)
Alarm Functionality
AISG mode: 10 - 30; CWA mode: 8.5 - 15
Alarm Current: 180 mA
Power Consumption
Typical 1.3W per TMA (2.5 W Total)
Power Handling, RMS
AISG Compatibility
52 dBm CW; 62 dBm peak
2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
340x171x70 mm (13.4x6.7x2.8 inch)
Weight(lbs)
<4.5 Kg (9.9)
Colors
Off white (NCS 1502-R)
RF Connectors
7/16 Female
Mounting Kit
Hose Clamps Included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40°C to +65°C (-40°F to +149°F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-1
Lightning Protection
3 kA 10/350 µs; 20 kA (Shield)
Housing
Aluminum
MTBF
>350.000 Hours
Ingress Protection
IP 68
APPROVAL AND TESTS
Safety
EN 60950
EMC
ETS 125 113
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Updated: 2009-09-21
33
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
25001, 25011
Tower Mounted Amplifiers
TMA Twin 900 12 dB SL AISG
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
890-915
UL Rejection
>82 dB
UL Gain(dB)
12
UL Return Loss
>18 dB
UL Noise Figure
1.4 dB, Typical
UL Output 3rd Order Intercept Point(dBm)
+25, Typical
UL Bypass Loss(dB)
2.0 dB, Typical
UL Max Input Power (dBm)
+10 dBm
DL Frequency Range (MHz)
935-960
DL Return Loss
>18 dB
DL Insertion Loss (dB)
0.4, Typical
Intermodulation
<-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V)
Alarm Functionality
AISG Mode: 10-30; Current alarm mode: 8.5 -17
AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current
Power Consumption
@12 VDC, 1.5W per LNA
Power Handling, RMS
AISG Compatibility
>53.5 dBm
25001 AISG1.1 (Field upgradable to AISG 2.0); 25011 AISG 2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
228x169x120 (9”x6.7”x4.8”)
Weight(lbs)
<6 kg (13.2 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 Female
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40°C to +65°C (-40°F to +149°F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-11
Lightning Protection
3 kA 10/350 µs, 8kA 8/20 µs, 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours per TMA
Ingress Protection
IP68
APPROVAL AND TESTS
Safety
EN60950, UL1950, ETL
EMC
ETS 300 342-3
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Rev A
Updated: 2009-12-29
34
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
25002, 25012
Tower Mounted Amplifiers
TMA Twin 900 EGSM 28 MHz 12 dB SL AISG
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
880-908
UL Rejection
>82 dB
UL Gain(dB)
12
UL Return Loss
>18 dB
UL Noise Figure
1.4 dB, Typical
UL Output 3rd Order Intercept Point(dBm)
+25, Typical
UL Bypass Loss(dB)
2.0, Typical
UL Max Input Power (dBm)
+10 dBm
DL Frequency Range (MHz)
925-953
DL Return Loss
>18 dB
DL Insertion Loss (dB)
0.4, Typical
Intermodulation
<-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V)
Alarm Functionality
AISG Mode: 10-30; Current alarm mode: 8.5 -17
AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current
Power Consumption
@ 12 VDC, 1.5W per LNA
Power Handling, RMS
AISG Compatibility
>53.5 dBm
25002 AISG 1.1 (Field upgradable to AISG 2.0);
25012 AISG 2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
228x169x120 (9”x6.7”x4.8”)
Weight(lbs)
<6 kg (13.2 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 Female
Mounting Kit
Mounting kit for pole and wall included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40°C to +65°C (-40°F to +149°F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-1
Lightning Protection
3 kA 10/350 µs; 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours per TMA
Ingress Protection
IP68
APPROVAL AND TESTS
Safety
EN60950, UL 1950, ETL
EMC
ETS 300 342-3
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Rev A
Updated: 2009-12-29
35
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
25014, 25016
Tower Mounted Amplifiers
TMA Twin 900 16 dB AISG
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
890-915
UL Rejection
>82 dB
UL Gain(dB)
16
UL Return Loss
>18 dB
UL Noise Figure
1.4 dB, Typical
UL Output 3rd Order Intercept Point(dBm)
+25, Typical
UL Bypass Loss(dB)
2.0 dB, Typical
UL Max Input Power (dBm)
+10 dBm
DL Frequency Range (MHz)
935-960
DL Return Loss
>18 dB
DL Insertion Loss (dB)
0.4, Typical
Intermodulation
<-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V)
Alarm Functionality
AISG Mode: 10-30; Current alarm mode: 8.5 -17
AISG compatible or in case of no AISG command received, current alarm mode: LGP25014 170-190 mA;
LGP25016 high CWA alarm current
Power Consumption
@12 VDC, 1.5W per LNA
Power Handling, RMS
AISG Compatibility
>53.5 dBm
AISG 2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
228x169x120 (9”x6.7”x4.8”)
Weight(lbs)
<6 kg (13.2 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 Female
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40°C to +65°C (-40°F to +149°F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-1
Lightning Protection
3 kA 10/350 µs, 8kA 8/20 µs, 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours per TMA
Ingress Protection
IP68
APPROVAL AND TESTS
Safety
EN60950, UL1950, ETL
EMC
ETS 300 342-3
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Rev A
Updated: 2009-12-29
36
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
25101, 25111
Tower Mounted Amplifiers
TMA Single 900 12 dB SL AISG
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
890-915
UL Rejection
>82 dB
UL Gain(dB)
12
UL Return Loss
>18 dB
UL Noise Figure
1.4 dB, Typical
UL Output 3rd Order Intercept Point(dBm)
+25, Typical
UL Bypass Loss(dB)
2.0 dB, Typical
UL Max Input Power (dBm)
+10 dBm
DL Frequency Range (MHz)
935-960
DL Return Loss
>18 dB
DL Insertion Loss (dB)
0.4, Typical
Intermodulation
<-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V)
Alarm Functionality
AISG Mode: 10-30; Current alarm mode: 8.5 -17
AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current
Power Consumption
@12 VDC, 1.5W per LNA
Power Handling, RMS
AISG Compatibility
>53.5 dBm
25101 AISG1.1 (Field upgradable to AISG 2.0);
25111 AISG 2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
228x169x69 (9”x6.7”x2.7”)
Weight(lbs)
<3 kg (<6.7 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 Female
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40°C to +65°C (-40°F to +149°F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-11
Lightning Protection
3 kA 10/350 µs, 8kA 8/20 µs, 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours per TMA
Ingress Protection
IP68
APPROVAL AND TESTS
Safety
EN60950, UL1950, ETL
EMC
ETS 300 342-3
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Rev A
Updated: 2010-02-19
37
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
25102, 25112
Tower Mounted Amplifiers
TMA Single 900 EGSM 28 MHz 12 dB SL AISG
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
880-908
UL Rejection
>82 dB
UL Gain(dB)
12
UL Return Loss
>18 dB
UL Noise Figure
1.4 dB, Typical
UL Output 3rd Order Intercept Point(dBm)
+25, Typical
UL Bypass Loss(dB)
2.0, Typical
UL Max Input Power (dBm)
+10 dBm
DL Frequency Range (MHz)
925-953
DL Return Loss
>18 dB
DL Insertion Loss (dB)
0.4, Typical
Intermodulation
<-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V)
Alarm Functionality
AISG Mode: 10-30; Current alarm mode: 8.5 -17
AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current
Power Consumption
@ 12 VDC, 1.5W per LNA
Power Handling, RMS
AISG Compatibility
>53.5 dBm
25102 AISG 1.1 (Field upgradable to AISG 2.0);
25112 AISG 2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
228x169x69 (9”x6.7”x2.7”)
Weight(lbs)
<3 kg (<6.7 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 Female
Mounting Kit
Mounting kit for pole and wall included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40°C to +65°C (-40°F to +149°F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-1
Lightning Protection
3 kA 10/350 µs; 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours per TMA
Ingress Protection
IP68
APPROVAL AND TESTS
Safety
EN60950, UL 1950, ETL
EMC
ETS 300 342-3
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Rev A
Updated: 2010-02-19
38
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
25103, 25113
Tower Mounted Amplifiers
TMA Single 900 12 dB AISG
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
890-915
UL Rejection
>82 dB
UL Gain(dB)
12
UL Return Loss
>18 dB
UL Noise Figure
1.4 dB, Typical
UL Output 3rd Order Intercept Point(dBm)
+25, Typical
UL Bypass Loss(dB)
2.0 dB, Typical
UL Max Input Power (dBm)
+10 dBm
DL Frequency Range (MHz)
935-960
DL Return Loss
>18 dB
DL Insertion Loss (dB)
0.4, Typical
Intermodulation
<-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V)
Alarm Functionality
AISG Mode: 10-30; Current alarm mode: 8.5 -17
AISG compatible or in case of no AISG command received, current alarm mode with high CWA (Current
Window Alarm)
Power Consumption
@12 VDC, 1.5W per LNA
Power Handling, RMS
AISG Compatibility
>53.5 dBm
25103 AISG1.1 (Field upgradable to AISG 2.0);
25113 AISG 2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
228x169x69 (9”x6.7”x2.7”)
Weight(lbs)
<3 kg (<6.7 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 Female
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40°C to +65°C (-40°F to +149°F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-11
Lightning Protection
3 kA 10/350 µs, 8kA 8/20 µs, 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours per TMA
Ingress Protection
IP68
APPROVAL AND TESTS
Safety
EN60950, UL1950, ETL
EMC
ETS 300 342-3
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Rev A
Updated: 2010-02-19
39
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Tower Mounted Amplifiers
LGP192nn
Dual Duplex EGSM 900 MHz Full Band
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
880-915
UL Rejection
>83 dB
UL Gain(dB)
12
UL Return Loss
>20 dB, Typical
UL Noise Figure
< 1.7 dB, Typical
UL Output 3rd Order Intercept Point(dBm)
> +23
UL Bypass Loss(dB)
2.0, Typical
UL Max Input Power (dBm)
+10
DL Frequency Range (MHz)
925-960
DL Return Loss
> 20 dB, Typical
DL Insertion Loss (dB)
<0.7 dB, Typical
Intermodulation
@ 2 x 43 dBm Tx carrier (dBc), <-115 (<-158)
Input Voltage (V)
Alarm Functionality
8-17
LGP19203 alarm current 170-190 mA;
LGP19201 current alarm compatible with PDU LGP121nn
Power Consumption
@12 VDC, 1.5 W
Power Handling, RMS
AISG Compatibility
>52 dBm
N/A
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
169 x 272 x 89 (7”x11”x4”)
Weight(lbs)
<5.7 kg (12.3 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 female
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40° C to +65° C (-40° F to +149° F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-11
Lightning Protection
3 kA 10/350 µs; 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours
Ingress Protection
IP65
APPROVAL AND TESTS
Safety
EN 60 950
EMC
ETS 300 342-3
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08405 Rev B
Updated: 2010-01-05
40
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
LGP174nn
Tower Mounted Amplifiers
TMA DD 850 MHz with SMR Rejection
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
824-849
UL Rejection
SMR Rejection, >30 dB @ 851 MHz
UL Gain(dB)
12
UL Return Loss
>21 dB, Typical
UL Noise Figure
< 1.7 dB, Typical
UL Output 3rd Order Intercept Point(dBm)
> +23, Typical
UL Bypass Loss(dB)
<2.2
UL Max Input Power (dBm)
+14
DL Frequency Range (MHz)
869-894
DL Return Loss
> 21 dB, Typical
DL Insertion Loss (dB)
< 0.45 dB, Typical
Intermodulation
@ 2 x 43 dBm Tx carrier dBm (dBc), <-118 (<-161)
Input Voltage (V)
Alarm Functionality
8-17
Two levels, individually supervised LNAs
Power Consumption
@12 VDC, 1.2 W
Power Handling, RMS
AISG Compatibility
>57 dBm
N/A
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
181 x 365 x 66 (7”x1’2x4”)
Weight(lbs)
<7.9 kg (17.4 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 female
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40° C to +65° C (-40° F to +149° F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-11
Lightning Protection
3 kA 10/350 µs; 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours
Ingress Protection
IP65
APPROVAL AND TESTS
Safety
UL60 950
EMC
FCC Part 15
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08411 Rev. A with added Bypass Loss Aug 24 2010
Updated: 2010-08-24
41
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Tower Mounted Amplifiers
LGP175nn
TMA DD 1900 MHz with 10 dB Rejection at 1912 MHz
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
1850-1910
UL Rejection
@1912 MHz, >10 dB
UL Gain(dB)
12
UL Return Loss
>20 dB
UL Noise Figure
< 1.6 dB
UL Output 3rd Order Intercept Point(dBm)
> +23
UL Bypass Loss(dB)
<2.6 dB
UL Max Input Power (dBm)
+14
DL Frequency Range (MHz)
1930-1990
DL Return Loss
> 20 dB
DL Insertion Loss (dB)
< 0.5 dB
Intermodulation
2 Tx@43 dBm (dBc), <-158
Input Voltage (V)
Alarm Functionality
8-17
Two levels, individually supervised LNAs
Power Consumption
@12 VDC, 1.2 W
Power Handling, RMS
AISG Compatibility
>54 dBm
N/A
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
181 x 365 x 66 (7”x1’2x4”)
Weight(lbs)
6.4 kg (14.1 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 female
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40° C to +65° C (-40° F to +149° F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-11
Lightning Protection
3 kA 10/350 µs; 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours
Ingress Protection
IP65
APPROVAL AND TESTS
Safety
UL60 950
EMC
FCC Part 15
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
PNLGP175nn
Updated: 2010-01-05
42
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
LGP18520, LGP18521
Tower Mounted Amplifiers
Twin Dual Duplex 1800 MHz Full Band
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
1710-1785
UL Rejection
>80 dB
UL Gain(dB)
12
UL Return Loss
>18 dB
UL Noise Figure
1.5 dB, Typical
UL Output 3rd Order Intercept Point(dBm)
+26 dBm, Typical
UL Bypass Loss(dB)
< 3.0 dB, Typical
UL Max Input Power (dBm)
+12
DL Frequency Range (MHz)
1805-1880
DL Return Loss
> 18 dB
DL Insertion Loss (dB)
0.4 dB, Typical
Intermodulation
@ 2 x 43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port
Input Voltage (V)
Alarm Functionality
AISG Mode: 10-30; Current alarm mode: 9 -17
AISG compatible or in case of no AISG command received current alarm mode.
Current alarm: LGP18520: Low CWA, LGP18521: High CWA
Power Consumption
@12 VDC, 1.5 W per LNA
Power Handling, RMS
AISG Compatibility
>53 dBm
AISG 2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
169 x 272.5 x 67.7 (7”x11”x3”)
Weight(lbs)
<4.5kg (9.9 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 female
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40° C to +65° C (-40° F to +149° F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-11
Lightning Protection
3 kA 10/350 µs; 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours
Ingress Protection
IP 68
APPROVAL AND TESTS
Safety
EN 60 950
EMC
ETS 301 489
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Updated: 2010-11-01
43
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Tower Mounted Amplifiers
LGP185nn
Twin Dual Duplex 1800 MHz Full Band
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
1710-1785
UL Rejection
>80 dB
UL Gain(dB)
12
UL Return Loss
>18 dB
UL Noise Figure
1.5 dB, Typical
UL Output 3rd Order Intercept Point(dBm)
+26 dBm, Typical
UL Bypass Loss(dB)
< 3.0 dB, Typical
UL Max Input Power (dBm)
+12
DL Frequency Range (MHz)
1805-1880
DL Return Loss
> 18 dB
DL Insertion Loss (dB)
0.4 dB, Typical
Intermodulation
@ 2 x 43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port
Input Voltage (V)
Alarm Functionality
AISG Mode: 10-30; Current alarm mode: 9 -17
LGP18506: 170-190 mA alarm current; LGP18501: current alarm compatible with PDU LGP121nn;
LGP18507, 10, 17, 20, 21 AISG compatible or in case of no AISG command received current alarm mode:
LGP18510, 20: 170-190 mA; LGP18507, 17: current alarm compatible with PDU LGP121nn
Power Consumption
@12 VDC, 1.5 W per LNA
Power Handling, RMS
AISG Compatibility
>53 dBm
LGP18501, 06 no AISG; LGP18507, 10 AISG 1.1 (field upgrdable to AISG 2.0), LGP18517, 20, 21 AISG 2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
169 x 272.5 x 67.7 (7”x11”x3”)
Weight(lbs)
<4.5kg (9.9 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 female
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40° C to +65° C (-40° F to +149° F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-11
Lightning Protection
3 kA 10/350 µs; 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours
Ingress Protection
LGP18501, 06: IP 65; LGP18507, 10, 17, 20, 21 IP 68
APPROVAL AND TESTS
Safety
EN 60 950
EMC
ETS 301 489
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08219 Rev C
Updated: 2010-11-29
44
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Tower Mounted Amplifiers
LGP186nn
Twin Dual Duplex 1900 MHz Full Band
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
1850-1910
UL Rejection
>80 dB
UL Gain(dB)
12
UL Return Loss
>18 dB
UL Noise Figure
1.5 dB, Typical
UL Output 3rd Order Intercept Point(dBm)
+26 dBm, Typical
UL Bypass Loss(dB)
< 3.0 dB, Typical
UL Max Input Power (dBm)
+12
DL Frequency Range (MHz)
1930-1990
DL Return Loss
> 18 dB
DL Insertion Loss (dB)
0.4 dB, Typical
Intermodulation
@ 2 x +43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port (<-159 dBc)
Input Voltage (V)
Alarm Functionality
AISG Mode: 10-30; Current alarm mode: 9 -17
LGP18606: 170-190 mA alarm current; LGP18601: current alarm compatible with PDU LGP121nn;
LGP18607, 10, 17, 20 AISG compatible or in case of no AISG command received current alarm mode:
LGP18610, 20: 170-190 mA; LGP18607, 17: current alarm compatible with PDU LGP121nn
Power Consumption
@12 VDC, 1.5 W per LNA
Power Handling, RMS
AISG Compatibility
>53 dBm
LGP18601, 06 no AISG; LGP18607, 10 AISG 1.1 (field upgrdable to AISG 2.0), LGP18617, 20 AISG 2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
169 x 272.5 x 67.7 (7”x11”x3”)
Weight(lbs)
<4.5kg (9.9 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 female
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40° C to +65° C (-40° F to +149° F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-11
Lightning Protection
3 kA 10/350 µs; 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours
Ingress Protection
LGP18601, 06: IP 65; LGP18607, 10, 17, 20 IP 68
APPROVAL AND TESTS
Safety
UL60 950, ETL
EMC
FCC Part 15
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08220 Rev B
Updated: 2010-01-05
45
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Tower Mounted Amplifiers
LGP215nn
Micro Twin Tower Mounted Amplifier Dual Duplex 2100 MHz Full
Band
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
1920-1980
UL Rejection
>85 dB (2110-2170 MHz)
UL Gain(dB)
12
UL Return Loss
>18 dB
UL Noise Figure
1.4 dB, Typical
UL Output 3rd Order Intercept Point(dBm)
+25, Typical
UL Bypass Loss(dB)
<2.0 dB, Typical
UL Max Input Power (dBm)
+14
DL Frequency Range (MHz)
2110-2170
DL Return Loss
>20 dB
DL Insertion Loss (dB)
0.3 dB, Typical
Intermodulation
@ 2 x 43 dBm Tx carriers, In receive band, <-125 dBm, referred to Antenna port
Input Voltage (V)
Alarm Functionality
AISG Mode: 10-30; Current alarm mode: 9 -17
AISG Compatible. In case of no AISG command received current alarm mode. LGP21509, 19: 170-190 mA;
LGP21508, 18: current alarm compatible with PDU LGP121nn
Power Consumption
@12 VDC, 1.5 W per LNA
Power Handling, RMS
AISG Compatibility
>49 dBm (4x43 dBm)
LGP21508, 09 AISG 1.1 (field upgradable to AISG 2.0); LGP21518, 19 AISG 2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
154 x 192 x 50 (6”x8”x2”)
Weight(lbs)
2.5kg (5.5 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 female
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40° C to +65° C (-40° F to +149° F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-11
Lightning Protection
3 kA 10/350 µs, 8kA 8/20 µs, 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours
Ingress Protection
IP65 and IP68
APPROVAL AND TESTS
Safety
EN 60 950
EMC
ETSI 125 113
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08222 Rev D
Updated: 2010-10-06
46
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
POWERWAVE
TSAW-07BP111-001
Tower Mounted Amplifiers
TMA Dual Band AWS with 700 Bypass 13 dB AISG
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
1710-1770 with 698-746 bypass
UL Rejection
>80 dB TX rejection, >25 dB rejection at 1700 and 1800 MHz
UL Gain(dB)
13
UL Return Loss
>18 dB
UL Noise Figure
<1.6 dB
UL Output 3rd Order Intercept Point(dBm)
>+23 (Input IP3 >+11)
UL Bypass Loss(dB)
<1.9
UL Max Input Power (dBm)
+14 dBm
DL Frequency Range (MHz)
2110-2170 with 698-746 bypass
DL Return Loss
>18 dB
DL Insertion Loss (dB)
<0.4
Intermodulation
<-155 dBc (2x43 dBm TX)
Input Voltage (V)
Alarm Functionality
8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)
AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA
Power Consumption
<1.5 W
Power Handling, RMS
AISG Compatibility
700: 500 W; AWS 300W
AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version)
TSAW-07BP112-001 has AISG 2.0 loaded from factory
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
250x169x82 (9.9”x6.7”x3.1”)
Weight(lbs)
<9 (<4 kg)
Colors
Off white (NCS 1502-R)
RF Connectors
Female 7/16 DIN, long neck
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40 to +65°C
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-1
Lightning Protection
IEC 61312-1: 2 kA 8/20 µs, 3 kA 10/350 µs
Housing
Aluminium
MTBF
>1 million hours
Ingress Protection
IP67 minimum
APPROVAL AND TESTS
Safety
UL 60950; UL 1950, TUV
EMC
FCC part 15
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Updated: 2009-12-29
47
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
TTAW-07BP111-001
Tower Mounted Amplifiers
TMA Twin Dual Band AWS with 700 Bypass 13 dB AISG
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
1710-1770 with 698-746 bypass
UL Rejection
>80 dB TX rejection, >25 dB rejection at 1700 and 1800 MHz
UL Gain(dB)
13
UL Return Loss
>18 dB
UL Noise Figure
<1.6 dB
UL Output 3rd Order Intercept Point(dBm)
>+23 (Input IP3 >+11)
UL Bypass Loss(dB)
<1.9
UL Max Input Power (dBm)
+14 dBm
DL Frequency Range (MHz)
2110-2170 with 698-746 bypass
DL Return Loss
>18 dB
DL Insertion Loss (dB)
<0.4
Intermodulation
<-155 dBc (2x43 dBm TX)
Input Voltage (V)
Alarm Functionality
8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)
AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA
Power Consumption
<1.5 W
Power Handling, RMS
AISG Compatibility
700: 500 W; AWS 300W
AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version)
TTAW-07BP112-001 has AISG 2.0 loaded from factory
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
250x169x139 (9.9”x6.7”x5.4”)
Weight(lbs)
<18 (<8 kg)
Colors
Off white (NCS 1502-R)
RF Connectors
Female 7/16 DIN, long neck
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40 to +65°C
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-1
Lightning Protection
IEC 61312-1: 2 kA 8/20 µs, 3 kA 10/350 µs
Housing
Aluminium
MTBF
>1 million hours
Ingress Protection
IP67 minimum
APPROVAL AND TESTS
Safety
UL 60950; UL 1950, TUV
EMC
FCC part 15
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Updated: 2009-12-29
48
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
TTAW-0000112-001
Tower Mounted Amplifiers
TMA Micro Twin AWS 12 dB AISG 2.0
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
1710-1755
UL Rejection
>82 dB
UL Gain(dB)
12
UL Return Loss
>20
UL Noise Figure
<1.4 dB
UL Output 3rd Order Intercept Point(dBm)
>+23
UL Bypass Loss(dB)
<2.0, Typical
UL Max Input Power (dBm)
+14
DL Frequency Range (MHz)
2110-2155
DL Return Loss
>20
DL Insertion Loss (dB)
<0.3
Intermodulation
@ 2 x +43 dBm Tx carriers in receive band, <-160 dBc, reffered to antenna port
Input Voltage (V)
Alarm Functionality
AISG Mode: 10-30; Current alarm mode: 9 -17
AISG compatible cor in case of no AISG command received current alarm mode 170-190 mA
Power Consumption
<1.1 W per branch @ 12V
Power Handling, RMS
AISG Compatibility
>49 dBm (4x43 dBm)
AISG 2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
192x154x50 mm (7.6”x5.9”x2.0”)
Weight(lbs)
<2.5kg (5.5 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 female, long neck
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40° C to +65° C (-40° F to + 149° F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-1
Lightning Protection
3 kA 10/350 µs, 8kA 8/20 µs, 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours
Ingress Protection
IP65 and IP68
APPROVAL AND TESTS
Safety
EN60950
EMC
3GPP: TS 25.113
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Rev B
Updated: 2010-10-06
49
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
TTAW-60BW111-001
Tower Mounted Amplifiers
TMA Micro Twin AWS 60 MHz BW 12 dB AISG
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
1710-1770
UL Rejection
>80 dB
UL Gain(dB)
12
UL Return Loss
>18 dB
UL Noise Figure
<1.8
UL Output 3rd Order Intercept Point(dBm)
>+22 (Input IP3 >+10)
UL Bypass Loss(dB)
<2.6
UL Max Input Power (dBm)
+14 dBm
DL Frequency Range (MHz)
2110-2170
DL Return Loss
>18 dB
DL Insertion Loss (dB)
<0.35
Intermodulation
<-155 dBc (2x43 dBm TX)
Input Voltage (V)
Alarm Functionality
8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)
AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA
Power Consumption
<2 W
Power Handling, RMS
AISG Compatibility
300 W
AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TTAW60BW112-001 has AISG 2.0 loaded from factory
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
192x154x50 mm (7.6”x5.9”x2.0”)
Weight(lbs)
<7 (<3 kg)
Colors
Off white (NCS 1502-R)
RF Connectors
Female 7/16 DIN, long neck
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40 to +65°C
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-1
Lightning Protection
IEC 61312-1: 2 kA 8/20 µs, 3 kA 10/350 µs
Housing
Aluminium
MTBF
>1 million hours per TMA
Ingress Protection
IP67 minimum
APPROVAL AND TESTS
Safety
UL 60950; UL 1950, TUV
EMC
FCC part 15
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Rev A
Updated: 2010-10-06
50
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
TS07-AWDB111-001
Tower Mounted Amplifiers
TMA Dual Band 700/AWS 13 dB AISG
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
UL Gain(dB)
698-716 MHz (Bandpass = 15.5 MHz, Roll off beginns at 699.25 and 714.75 MHz) and 1710-1770 MHz
TX rejection >80 dB; 700 TMA: >40 dB rejection at 697.8 and at 716.2 MHz;
AWS TMA: >25 dB rejection at 1700 and 1800 MHz
13
UL Return Loss
>18 dB
UL Noise Figure
AWS: < 1.6 dB, 700: <2.0 dB
UL Output 3rd Order Intercept Point(dBm)
>+22 (Input IP3 >+10)
UL Bypass Loss(dB)
AWS: <2.0, 700: < 2.9
UL Max Input Power (dBm)
+14 dBm
DL Frequency Range (MHz)
728-746 and 2110-2170
DL Return Loss
>18 dB
DL Insertion Loss (dB)
<0.4
Intermodulation
<-155 dBc (2x43 dBm TX)
Input Voltage (V)
Alarm Functionality
8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)
AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA
Power Consumption
<1.5 W (per LNA)
Power Handling, RMS
AISG Compatibility
700: 500 W; AWS 300W
UL Rejection
AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version)
TS07-AWDB112-001 has AISG 2.0 loaded from factory
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
305x305x127 (12”x12”x5”)
Weight(lbs)
<27.6 (<12.5 kg)
Colors
Off white (NCS 1502-R)
RF Connectors
Female 7/16 DIN, long neck
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40 to +65°C
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-1
Lightning Protection
IEC 61312-1: 2 kA 8/20 µs, 3 kA 10/350 µs
Housing
Aluminium
MTBF
>1 million hours per TMA
Ingress Protection
IP67 minimum
APPROVAL AND TESTS
Safety
UL 60950; UL 1950, TUV
EMC
FCC part 15
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Updated: 2009-12-29
51
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
TT08-19DB111-001
Tower Mounted Amplifiers
TMA Twin Dual Band 850/1900 12 dB AISG 1.1
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
824-849 / 1850-1910
UL Rejection
SMR Rejection, >30 dB @ 851 MHz
UL Gain(dB)
12
UL Return Loss
>18 dB
UL Noise Figure
<1.7 dB, Typical
UL Output 3rd Order Intercept Point(dBm)
+25, Typical
UL Bypass Loss(dB)
2.5, Typical
UL Max Input Power (dBm)
+14 dBm
DL Frequency Range (MHz)
869-894 / 1930-1990
DL Return Loss
> 18 dB
DL Insertion Loss (dB)
850 MHz, 0.4; 1900 MHz, 0.5
Intermodulation
@ 2 x +43 dBm Tx carriers, in receive band, <-160 dBc, referred to antenna port
Input Voltage (V)
Alarm Functionality
AISG Mode: 10-30; Current alarm mode: 8 -17
AISG compatibe or in case of no AISG command received current alarm mode 270-290 mA
Power Consumption
< 1.8 W per branch @ 12V
Power Handling, RMS
AISG Compatibility
850: >57 dBm; 1900: >55 dBm
AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only dependent on loaded SW version)
TT08-19DB112-001 has AISG 2.0 loaded from factory
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
360x169x137mm (14.2”x6.7”x5.4”)
Weight(lbs)
<22
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 female, long neck
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40° C to +65° C (-40° F to + 149° F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-1
Lightning Protection
3 kA 10/350 µs; 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours (per TMA)
Ingress Protection
IP65 and IP68
APPROVAL AND TESTS
Safety
EN 60950
EMC
3GPP: TS 25.113
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Rev B
Updated: 2010-02-04
52
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
TT19-08BP111-001
Tower Mounted Amplifiers
TMA Twin 1900 with 850 Bypass 12 dB AISG 1.1
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
1850-1910 with 824-894 bypass
UL Rejection
>77 dB
UL Gain(dB)
12
UL Return Loss
>18
UL Noise Figure
<1.7 dB, Typical
UL Output 3rd Order Intercept Point(dBm)
>+23
UL Bypass Loss(dB)
2.5, Typical
UL Max Input Power (dBm)
+14 dBm
DL Frequency Range (MHz)
1930-1990 with 824-894 bypass
DL Return Loss
>18
DL Insertion Loss (dB)
850 MHz, <0.3; 1900 MHz, <0.5
Intermodulation
@ 2 x +43 dBm TX carriers, in receive band, <160 dBc, reffered to antenna port
Input Voltage (V)
Alarm Functionality
AISG Mode: 10-30; Current alarm mode: 8 -17
AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA
Power Consumption
<1.1W @12V
Power Handling, RMS
AISG Compatibility
850: >57 dBm; 1900: >55 dBm
AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only dependent on loaded SW version)
TT19-08BP112-001 has AISG 2.0 loaded from factory
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
250x169x137 mm (9.9”x6.7”x5.4”)
Weight(lbs)
<16
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 female, long neck
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40° C to +65° C (-40° F to +149° F)
Operational
ETS 300 019-1-4
Transportation
ETS 300 019-1-2
Storage
ETS 300 019-1-1
Lightning Protection
3 kA 10/350 µs; 20 kA (Shield)
Housing
Aluminum
MTBF
>1 million hours per TMA
Ingress Protection
IP65 and IP68
APPROVAL AND TESTS
Safety
EN60950
EMC
3GPP: TS 25.113
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Rev B
Updated: 2010-02-04
53
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
TU09-000001n-001
Tower Mounted Amplifiers
ACTIVE UGC 900 12dB VAR GAIN SL AISG
ELECTRICAL SPECIFICATIONS
UL Frequency Range (MHz)
890-915
UL Rejection
>82 dB
UL Gain(dB)
Variable 0-12 in 1 dB steps
UL Return Loss
>18 dB
UL Noise Figure
1.5dB, typical at 12 dB gain
UL Output 3rd Order Intercept Point(dBm)
+25, typical
UL Bypass Loss(dB)
<5.5 (Including 3 dB hybrid loss)
UL Max Input Power (dBm)
DL Frequency Range (MHz)
935-960
DL Return Loss
>18 dB
DL Insertion Loss (dB)
0.4
Intermodulation
<-118 dBm (@ 2x43 dBm Tx carriers)
Input Voltage (V)
Alarm Functionality
AISG Mode: 10-30; Current alarm mode: 8.5 -17
AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current
Power Consumption
@12 VDC, 1.5W per LNA
Power Handling, RMS
AISG Compatibility
>53.5 dBm
TU09-0000011-001 AISG 1.1 (Field upgradable to AISG 2.0);
TU09-0000012-001 AISG 2.0
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
230.5x171x160 (9.1”x6.8”x6.3”)
Weight(lbs)
<7 kg (15.4 lbs)
Colors
Off white (NCS 1502-R)
RF Connectors
DIN 7/16 Female
Mounting Kit
Mounting kit for pole and wall is included
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-40°C to +65°C (-40°F to +149°F)
Operational
Transportation
Storage
Lightning Protection
Housing
Aluminum
MTBF
>1 million hours per TMA
Ingress Protection
IP68
APPROVAL AND TESTS
Safety
EN60950, UL1950, ETL
EMC
ETS 300 342-3
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Updated: 2010-01-29
54
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Base Station Products
POWERWAVE
Power Distribution Units
TMA Products
Power Distribution Units
Title
Up-Link (MHz)
Down-Link (MHz)
Part Number
Page
PDU Lite – Indoor
N/A
N/A
LGP121nn
56
PDU Lite – Indoor (For
Dual Band TMAs)
N/A
N/A
LGP18104
57
55
Power Distribution Units
POWERWAVE
LGP121nn
PDU Lite – Indoor
ELECTRICAL DATA
Input Voltage
20 to 60 V DC, positive or negative
Input Current(Max)
1A
Input Protection and Polarity
Automatic Polarity Agile
Output Voltage
12 V DC +/- 1 V
Output Current(Max)
375 mA/port
Output Protection
Automatic short-circuit protection, auto recovery
Sum Alarm Output Port
Relay Normally Open and Normally Closed
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
3.9 x 0.8 x 2.4 in
Weight(lbs)
120 g (0.3 lbs.)
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-33° C to +60° C (-27° F to +140° F)
Humidity
5-95% RH non condensing
MTBF
>1 million hours
APPROVAL AND TESTS
EMC
ETS 300 342-3
Environmental
ETS 300 019
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08280 Rev A
Updated: 2010-01-05
56
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Power Distribution Units
POWERWAVE
LGP18104
PDU Lite – Indoor (For Dual Band TMAs)
ELECTRICAL DATA
Input Voltage
20-60 V DC, positive or negative
Input Current(Max)
3x1 A
Input Protection and Polarity
Automatic Polarity Agile
Output Voltage
12 V DC +/- 1 V
Output Current(Max)
375 mA/port
Output Protection
Automatic short-circuit protection, auto recovery
Sum Alarm Output Port
Relay Normally Open and Normally Closed
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
19” 1HU (19 x 1.75)
Weight(lbs)
700 (1.55)
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-33° to +60 ° (-27° to +140°)
Humidity
5-95% RH non condensing
MTBF
>1 000 000 hours (over 100 years)
APPROVAL AND TESTS
EMC
ETS 300 342-3
Environmental
ETS 300 019
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
Updated: 2009-09-21
57
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Base Station Products
POWERWAVE
Current Injectors
TMA Products
Current Injectors
Frequency Range (MHz)
Return Loss (dB)
Insertion Loss (dB)
Part Number
Page
698-960 and 1710-2690
>20
<0.1
LGP213nn
59
698-960 and 1710-2690
>20
<0.1
LGP233nn
60
806-960 or 1710-1990
>25
N/A
LGP138nn
61
58
POWERWAVE
Current Injectors
LGP213nn
Outdoor Current Injector
TECHNICAL SPECIFICATIONS
Return Loss (dB)
698 - 960 and 1710 - 2690
(Frequency extended: LGP21301 from Rev L, LGP21302 from Rev K, Sep 1 2010)
>20
Insertion Loss (dB)
< 0.1
DC Current (Max)
Intermodulation 2x 43 dBm Tx Carriers dBm
1.5 A
<-116 dBm (<-159 dBc)
Frequency Range (MHz)
MECHANICAL SPECIFICATIONS
Dimensions - Without Mounting Plate - mm(in)
87 x 41 x 51 (3.4 x 1.6 x 2.0)
Weight kg(lbs)
0.32 (0.71)
Color
Off-white, NCS 1502R
Housing
Aluminum
DIN 7/16 female and male
LGP21301 ANT female, BTS male
LGP21302 ANT male, BTS female
SMA female
RF Connectors
DC Supply Connector
ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit)
-40° to +65 (-40° to +149°)
MTBF
>1 000 000 hours
Safety
EN 609 50, UL 60950, ETL
Ingress Protection
IP 68 - EN 60 529
Environmental
ETS 300 019
Lightning Protection
IEC 61312-1
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08406 Rev. B
© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-09-02
59
POWERWAVE
Current Injectors
LGP233nn
Indoor Current Injector
TECHNICAL SPECIFICATIONS
Return Loss (dB)
698 - 960 and 1710 - 2690
(Frequency extended: LGP23301 and LGP23302 from Rev M, Sep 1 2010)
>20
Insertion Loss (dB)
<0.1
DC Current (Max)
Intermodulation 2x 43 dBm Tx Carriers dBm
1.5 A
<-116 dBm (<-159 dBc)
Frequency Range (MHz)
MECHANICAL SPECIFICATIONS
Dimensions - Without Mounting Plate - mm(in)
87 x 41 x 51 (3.4 x 1.6 x 2.0)
Weight kg(lbs)
0.32 (0.71)
Color
Silver plating
Housing
Zink Alloy
DIN 7/16 female and male
LGP23301 ANT female, BTS male
LGP23302 ANT male, BTS female
SMB male
RF Connectors
DC Supply Connector
ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit)
-5° to +55° (23° to +131°)
MTBF
>1 000 000 hours (over 100 years)
Safety
EN 609 50, UL 609 50, ETL
Ingress Protection
IP 54 - EN 605 29
Environmental
ETS 300 019
Lightning Protection
IEC 61312-1
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08407 Rev. B
© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-09-14
60
POWERWAVE
Current Injectors
LGP138nn
Outdoor Current Injector
TECHNICAL SPECIFICATIONS
Frequency Range (MHz)
806 - 960MHz or 1710 - 1990
Return Loss (dB)
>25
Insertion Loss (dB)
< 0.1
DC Current, (Max)
Intermodulation 2x 43 dBm Tx Carriers dBm
1A
<-110 dBm, (<-153)
MECHANICAL SPECIFICATIONS
Dimensions - Without Mounting Plate - mm(in)
107 x 48 x 62 (4.2 x 1.9 x 2.4)
Weight kg(lbs)
0.45 (<1)
Color
Off-white, NCS 1502R
Housing
Aluminum
RF Connectors
DIN 7/16 or type N female and male
DC Supply Connector
Screw Terminal Block
ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit)
-40° to +65 (-40° to +149°)
MTBF
>1 000 000 hours
Safety
EN 609 50, UL 60950, ETL
Ingress Protection
IP 65 - EN 60 529
Environmental
ETS 300 019
Lightning Protection
IEC 1312-1
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08276 Rev B
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-09-14
61
Power wave
Filter Products
Base station co-siting and new technology overlays are
growing trends around the globe and Powerwave is leading
the way with a range of same band, dual band and triple
band solutions. There are many reasons for adopting
co-siting filter solutions, including limited tower space,
zoning regulations and public opinion against new site
locations. In addition, as newer technology platforms such
as UMTS or LTE® are deployed, the need for straightforward,
low loss, high performance overlay solutions are required
to allow operators to maximize existing network CAPEX by
reusing installed cable and antenna structures.
Same Band Combiners T1
Diplexer/Crossband
Combiner
Triplexer/Crossband
Combiners
Duplexers
Interference Filters
Base Station Products
POWERWAVE
Filters
Base Station Products
Filters
Range (MHz)
Insertion Loss (dB)
Return Loss (db)
Part Number
824-894
4.2 dB maximum
18 dB minimum
CM1000-AMPS-xxx
64
880-960
4.5 dB maximum
18 dB minimum
CM1001-EGSMxxx
65
698-2170
700/800 Port: 0.15 dB max.
20 dB minimum
CM1007-DBPXBCxxx
66
1710-2690
0.10 dB typ., 0.20 dB max.
20 dB minimum
CM1005-DBPXBC
67
1710-2690
0.10 dB typ., 0.30 dB max.
20 dB minimum
CM1006-TBPXBC
68
1710-2170
0.3 dB maximum (Rx)
0.6 dB maximum (Tx)
18 dB minimum
LGP145nn
69
1850-1990
0.6 dB maximum (Rx)
18 dB minimum
LGP146nn
70
880-2170
0.2 dB maximum
20 dB minimum
LGP141nn
71
890-960
-01: <1.5 dB (<3.5 dB 890-892 MHz)
-02: <1.0 dB (<1.8 dB 890-892 MHz)
-03: <1.5 dB (< 3.5 dB 896-898 MHz)
>18 dB
LGP195nn
72
824-2170
<0.1 dB Typical
20 dB minimum
LGP219nn
73
63
Page
POWERWAVE
Filters
CM1000-AMPS-xxx
850 MHz Same Band Combiner, w/AISG and DC Transparency Type 1
TECHNICAL SPECIFICATIONS
Filter Type
850 MHz Same Band Combiner, w/AISG and DC Transparency Type 1
Range (MHz)
824-894
Frequency Range (Full Band MHz)
Uplink, 824-849
Downlink, 869-894
Insertion Loss (dB)
4.2 dB maximum
0.6 dB maximum
Return Loss (dB)
18 dB minimum
18 dB minimum
Average Power Handling (dBm)
N/A
200 watts (+53.0)
1200 watts (+60.8) PEP maximum at 3000m, +65C and
N/A
2:1 antenna mismatch
-115 dBm (-158 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band
Peak Power (dBm)
Intermodulation (IM) (dBc) (Products, Max)
Isolation Between Ports
Systems Isolation (GSM-UMTS), Downlink, 36 dB minimum, Uplink, 18 dB minimum
Common Port
TMA DC Voltage & Control - BTS2 Main to ANT2 & BTS2 DIV to ANT1
AISG Mode
Per AISG 1.1, 2.0
AISG Control Signal Loss
1 dB maximum @ 2.176 MHz, 2 dB maximum @ 11 MHz
Voltage Drop with 15W Power
1 V maximum @ 10-30VDC
Supply Voltage Handling
0-35VDC
Continuous Current Handling
5 A, 0-35VDC
DC Load
100 mA, +/-20 mA at GSM BTS Ports
MECHANICAL SPECIFICATIONS
Dimensions mm(in)
437.8 x 228 x 61.4 (17.24”x 8.98”x 2.42”) - Excluding Rack/Mast Brackets & Connectors
Weight kg(lbs)
8.15 (18)
Color
Off White (NCS 1502-R)
Housing
Aluminum, IP 67
RF Connectors
DIN 7/16 female
Mounting Kit - Rack Mount
19” Rack Mount Brackets (order P/N CM1000-AMPS-001)
Mounting Kit - Tower Mounting
Hose Clamps in Stainless Steel (order P/N CM1000-AMPS-002)
ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit)
-40° C to +65° C (-40° to +149°)
MTBF
1 Million Hours
Surge Protection
IEC 61312-1
Safety
EN 60950, UL 60950
Ingress Protection
IP67
Environmental
ETS 300 019
EMC
3GPP: TS 25.113
The SAME BAND COMBINER products are intended to install either indoors in rack cabinets or on walls, or outdoors on towers or walls close to the Base Transceiver
Stations. The main design criteria have been to optimize electrical performance and to make easy installation for different locations. There are two mounting bracket
options available either for a cabinet or outdoor installation. The Same Band Combiners can be used for a variety of dual-technology combining on common antennas,
such as TDMA + GSM, GSM + UMTS, GSM + LTE, UMTS + LTE or IS95 CDMA + 1X/3X EVDO. The product combines technology 1 and 2 to the same antenna lines.
Technology 1 BTS TX carriers and RX main path are connected to the 1st antenna line and technology 2 BTS TX and RX main feeds are connected to 2nd antenna
line. Technology 1 BTS RX diversity is connected from 2nd antenna line and technology 2 BTS RX diversity is fed from the 1st antenna line. In addition, the product
provides AISG carrier signal (AC bandwidth to 11 MHz) and DC-power path from the diversity port BTS2 to the 1st antenna line and from main BTS2 port to the 2nd
antenna line.
Block Diagram - Type 1 Same Band Combiner
D031-08700B
Tower Mounting Brackets Option Shown
Updated: 2010-03-23
64
Typical Application - GSM & UMTS Combining
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Filters
CM1001-EGSM-xxx
GSM900 Same Band Combiner, w/AISG and DC Transparency Type 1
TECHNICAL SPECIFICATIONS
Filter Type
GSM900 Same Band Combiner, w/AISG and DC Transparency Type 1
Range (MHz)
880-960
Frequency Range (Full Band MHz)
Uplink, 880-915
Downlink, 925-960
Insertion Loss (dB)
4.5 dB maximum
0.6 dB maximum
Return Loss (dB)
18 dB minimum
18 dB minimum
Average Power Handling (dBm)
N/A
200 watts (+53.0)
1200 watts (+60.8) PEP maximum at 3000m, +65C and
N/A
2:1 antenna mismatch
-115 dBm (-158 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band
Peak Power (dBm)
Intermodulation (IM) (dBc) (Products, Max)
Isolation Between Ports
Systems Isolation (GSM-UMTS), Downlink, 36 dB minimum, Uplink, 18 dB minimum
Common Port
TMA DC Voltage & Control - BTS2 Main to ANT2 & BTS2 DIV to ANT1
AISG Mode
Per AISG 1.1, 2.0
AISG Control Signal Loss
1 dB maximum @ 2.176 MHz, 2 dB maximum @ 11 MHz
Voltage Drop with 15W Power
1 V maximum @ 10-30VDC
Supply Voltage Handling
0-35VDC
Continuous Current Handling
5 A, 0-35VDC
DC Load
100 mA, +/-20 mA at GSM BTS Ports
MECHANICAL SPECIFICATIONS
Dimensions mm(in)
437.8 x 228 x 61.4 (17.24”x 8.98”x 2.42”) - Excluding Rack/Mast Brackets & Connectors
Weight kg(lbs)
8.15 (18)
Color
Off White (NCS 1502-R)
Housing
Aluminum, IP 67
RF Connectors
DIN 7/16 female
Mounting Kit - Rack Mount
19” Rack Mount Brackets (order P/N CM1001-EGSM-001)
Mounting Kit - Tower Mounting
Hose Clamps in Stainless Steel (order P/N CM1001-EGSM-002)
ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit)
-40° C to +65° C (-40° to +149°)
MTBF
1 Million Hours
Surge Protection
IEC 61312-1
Safety
EN 60950, UL 60950
Ingress Protection
IP67
Environmental
ETS 300 019
EMC
3GPP: TS 25.113
The SAME BAND COMBINER products are intended to install either indoors in rack cabinets or on walls, or outdoors on towers or walls close to the Base Transceiver
Stations. The main design criteria have been to optimize electrical performance and to make easy installation for different locations. There are two mounting bracket
options available either for a cabinet or outdoor installation. The Same Band Combiners can be used for a variety of dual-technology combining on common antennas,
such as TDMA + GSM, GSM + UMTS, GSM + LTE, UMTS + LTE or IS95 CDMA + 1X/3X EVDO. The product combines technology 1 and 2 to the same antenna lines.
Technology 1 BTS TX carriers and RX main path are connected to the 1st antenna line and technology 2 BTS TX and RX main feeds are connected to 2nd antenna
line. Technology 1 BTS RX diversity is connected from 2nd antenna line and technology 2 BTS RX diversity is fed from the 1st antenna line. In addition, the product
provides AISG carrier signal (AC bandwidth to 11 MHz) and DC-power path from the diversity port BTS2 to the 1st antenna line and from main BTS2 port to the 2nd
antenna line.
Block Diagram - Type 1 Same Band Combiner
D031-08701B
Tower Mounting Brackets Option Shown
Updated: 2010-03-23
65
Typical Application - GSM & UMTS Combining
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Filters
Diplex Filter for 700/800 MHz and AWS/PCS with DC Auto Sense
CM1007-DBPXBC-xxx
TECHNICAL SPECIFICATIONS
Filter Type
Diplex Filter for 700/800 MHz and AWS/PCS
Range
698-2170 MHz
Frequency Range
698-894 MHz/1710-2170 MHz
Frequency Range
700/800 Port, 698-894 MHz
AWS/PCS Port, 1710-2170 MHz
Insertion Loss
700/800 Port: 0.15 dB Max.
AWS/PCS Port: 0.15 dB Max.
Return Loss
Rejection
20 dB minimum
20 dB minimum
60 dB min. @ 1710-2170 MHz
60 dB min. @ 698-894 MHz
Isolation (Channel to Channel)
60 dB minimum
Average Power Handling (dBm)
Peak Power (dBm)
500 watts (+57) max.
500 watts (+57) max.
5 kW (+67 dBm) PEP maximum at 3000m, +65C and
5 kW (+67 dBm) PEP maximum at 3000m, +65C and
2:1 antenna mismatch
2:1 antenna mismatch
-115 dBm (-158) maximum in Rx band, two/+43 dBm carriers in the Tx band
Intermodulation (IM) (dBc) (Products, Max)
Common+Port
TMA supply voltage, fed via the RF cable, +32 V, 2 A Maximum
DC Bias/AISG Auto-Sense (-001 Option):
DC/AISG Auto-Sense from low or high channels (see logic table below)
Antenna Sniffer Port (-002 Option):
Option -001 + Sniffer Port -43 to -30 dB (698-894 and 1710- 2170 MHz)
AISG Port+Converter (-003 Option):
Options -001 & -002 + AISG Connector (Internal Converter AISG 1.1/2.0 Compatible)
DC/AISG Delete (-004 Option):
All ports are DC and AISG isolated from each other (no Auto-Sense function)
DC/AISG to Low & High Channels (-005 Option):
DC/AISG to Low Channel (-006 Option):
All ports are permanently connected for DC and AISG connectivity (no Auto-Sense function)
Low frequency channel is permanently connected for DC and AISG connectivity (no Auto-Sense function)
High frequency channel is permanently connected for DC and AISG connectivity (no Auto-Sense function)
DC/AISG to High Channel (-007 Option):
MECHANICAL SPECIFICATIONS
Dimensions mm(in)
125 x 227.5 x 83 (4.92” x 8.96” x 3.27”), excluding connectors and bracket
Weight kg(lbs)
3.0 (6.5 lbs) maximum
Color
Off White (NCS 1502-R)
Housing
Aluminum
RF Connectors
DIN 7/16 female, long barrel
Sniffer Port Connector
N-F (IP67 rated protective cap included)
AISG Connector
Per IEC-60130-9 (IP67 rated protective cap included)
Mounting_Kit
Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit)
-40°to +65°(-40°to +149°)
MTBF
> 2 Million Hours
Lightning Protection
IEC 61312-1, 3 kA 10/350 µs, 8 kA 8/20 µs
Safety
EN 60 950, UL 1950, ETL
Ingress Protection
IP67 (IP67 rated cap must be connected to any unused ports)
Environmental
ETS 300 019
EMC
ETS 300 342-3
Product Assumes that AISG will always be on the same connector as DC.
DC Auto Sense Logic Table
Low Port
(698-894 MHz)
#2 Priority
Connection
#2 Priority
Connection
#3 Priority
Connection
High Port
(1710-2170 MHz)
#1 Priority
Connection
#1 Priority
Connection
#2 Priority
Connection
#1 Priority
Connection
DC/AISG
Connection
DC AutoSense *
DC AutoSense *
DC AutoSense *
Tower Top
Capable
Yes - Common to
High Port Only
Yes - Common to
High Port Only
No - BTS location
only
CM1007-DBPXBC-004
No Connection
No Connection
N/A
Hard-Wired
Yes
CM1007-DBPXBC-005
Connection
Connection
N/A
Hard-Wired
Yes
CM1007-DBPXBC-006
Connection
No Connection
N/A
Hard-Wired
Yes
CM1007-DBPXBC-007
No Connection
Connection
N/A
Hard-Wired
Yes
DC/AISG Feedthru
CM1007-DBPXBC-001
CM1007-DBPXBC-002
CM1007-DBPXBC-003
AISG Port
N/A
N/A
* Product assumes that AISG signal will always be associated with DC presence
D031-08690B
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-07-12
66
POWERWAVE
Filters
CM1005-DBPXBC
Diplex Filter for 1700/1800/1900/2100 and 2300/2600 MHz
For Release in Spring 2011
TECHNICAL SPECIFICATIONS
Filter Type
Diplex Filter for 1700/1800/1900/2100 and 2300/2600MHz
Range
1710-2690
Frequency Range
1710-2170 MHz/2300-2690 MHz
Frequency Range
Low Port, 1710-2170 MHz
High Port, 2300-2690 MHz
Insertion Loss
0.10 dB typ., 0.20 dB max.
0.10 dB typ., 0.20 dB max.
Return Loss
Rejection
20 dB minimum
20 dB minimum
50 dB min. @ 2300-2690 MHz
50 dB min. @ 1710-2170 MHz
Isolation (Channel to Channel)
50 dB minimum
Average Power Handling (dBm)
Peak Power (dBm)
500 watts (+57) max.
500 watts (+57) max.
5 kW (+67 dBm) PEP maximum at 3000m, +65C and
5 kW (+67 dBm) PEP maximum at 3000m, +65C and
2:1 antenna mismatch
2:1 antenna mismatch
-117 dBm (-160) maximum in Rx band, two/+43 dBm carriers in the Tx band
Intermodulation (IM) (dBc) (Products, Max)
Common+Port
DC Bias/AISG Passthru (single):
DC Bias/AISG Passthru (twin):
TMA supply voltage, fed via the RF cable, +31 V, 3 A Maximum
-01: No Connection (DC
-02: DC/AISG to issue
-03: DC/AISG to issue
-04: DC/AISG to issue
Grounded)
2.0 (connected all ports)
2.0 (High Port to
2.0 (Low Port to Antenna
Antenna Port)
Port)
-005: No Connection
-006: DC/AISG to issue
-007: DC/AISG to issue
-008: DC/AISG to issue
(DC Grounded)
2.0 (connected all ports)
2.0 (High Port to
2.0 (Low Port to Antenna
Antenna Port)
Port)
MECHANICAL SPECIFICATIONS
Dimensions mm(in)
158 x 112 x 61 (6.22”x 4.4”x 2.4”) excluding mounting brackets & connectors
Weight kg(lbs)
2.3 (5.1) maximum
Color
Off White (NCS 1502-R)
Housing
Aluminum
RF Connectors
DIN 7/16 female, long barrel
Mounting_Kit
Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit)
-40°to +65°(-40°to +149°)
MTBF
3 Million Hours
Lightning Protection
According to IEC 61312-1, 8 kA 8/20 uS;center pin (any port)-shield
Safety
EN 60 950, UL 1950, ETL
Ingress Protection
IP68
Environmental
ETS 300 019
EMC
ETS 300 342-3
D031-08695B
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-30
67
POWERWAVE
Filters
CM1006-TBPXBC
Triplex Filter for DCS, UMTS & 2600 MHz
For Release in Spring 2011
TECHNICAL SPECIFICATIONS
Range
Frequency Range
Insertion Loss
Return Loss
Average Power Handling (dBm)
Peak Power (dBm)
Intermodulation (IM) (dBc) (Products, Max)
1710-2690 MHz
Mid Port, 1920-2170
MHz
0.10 dB typical (0.30 dB
max.)
Low Port, 1710-1880
MHz
0.10 dB typical (0.30
dB max.)
20 dB minimum
300 watts (+55) min
High Port, 2300-2690 MHz
0.10 dB typical (0.20 dB max.)
20 dB minimum
300 watts (+55) min
20 dB minimum
200 watts (+53) min
3 kW (+65 dBm) PEP
3 kW (+65 dBm) PEP
2kW(+63) PEP max. at 3000m, +65°C and 2:1
maximum at 3000m,
maximum at 3000m,
antenna mismatch
+65C and 2:1 antenna
+65C and 2:1 antenna
mismatch
mismatch
-117 dBm (-160) maximum in Rx band, two/+43 dBm carriers in the Tx band
Isolation Between Ports
50 dB minimum
Common+Port
TMA supply voltage, fed via the RF cable, +/-31 V maximum, 3 A
DC Bias/AISG Passthru -001 (Single) / -006 (Twin)
No Connection (DC Grounded)
DC Bias/AISG Passthru -002 (Single) / -007 (Twin)
DC/AISG to issue 2.0 (connected all ports)
DC Bias/AISG Passthru -003 (Single) / -008 (Twin)
DC/AISG to issue 2.0 (connected high port to antenna port)
DC Bias/AISG Passthru -004 (Single) / -009 (Twin)
DC/AISG to issue 2.0 (connected mid port to antenna port)
DC Bias/AISG Passthru -005 (Single) / -010 (Twin)
DC/AISG to issue 2.0 (connected low port to antenna port)
MECHANICAL SPECIFICATIONS
Dimensions mm(in)
200 x 200 x 63.3 (7.9”x 7.9”x 2.5”) excluding mounting brackets & connectors
Weight kg(lbs)
<3.0 (6.5)
Color
Off White (NCS 1502-R)
Housing
Aluminum
RF Connectors
DIN 7/16 female, long barrel
Mounting Kit
Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit)
-40° C to +65° C (-40° to +149°)
MTBF
2 Million Hours
Safety
EN 60 950, UL 60 950, ETL
Ingress Protection
IP68
Environmental
ETS 300 019
D031-08696B
Updated: 2010-11-30
68
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Filters
LGP145nn
Diplex Filter for 1800/UMTS with Configurable DC Transparency
TECHNICAL SPECIFICATIONS
Filter Type
Diplexer for 1800/2100
Range (MHz)
1710-2170
Frequency Range (Full Band MHz)
1710-1880 MHz/1920-2170
Frequency Range (MHz)
Insertion Loss (dB)
Return Loss (dB)
Rejection
Average Power Handling (dBm)
Peak Power (dBm)
1800 Port, 1710-1880
UMTS Port, 1920-2170
0.3 dB maximum (Rx), 0.6 dB maximum (Tx)
0.5 dB maximum (Rx), 0.3 dB maximum (Tx)
18 dB minimum
74 dB min. 1920-1980 MHz & 59 dB min. 2110-2170
MHz
240 watts (+53.8) minimum
18 dB minimum
60 dB min. 1710-1880 MHz
1440 watts (+61) minimum
1600 watts (+62) minimum
Intermodulation (IM) (dBc) (Products, Max)
Common+Port
DC Bias/AISG Passthru
80 watts (+49) minimum
-118 dBm (-161) maximum in Rx band, two/+43 dBm carriers in the Tx band
TMA supply voltage, fed via the RF cable, +/-58.5 V maximum, 2 A
-01: DC/AISG to issue
-02: DC/AISG to issue
-03: DC/AISG to issue
-04: No Connection (DC
2.0 (UMTS Port to
2.0 (1800 Port to
2.0 (connected all ports)
Grounded)
Antenna Port)
Antenna Port)
MECHANICAL SPECIFICATIONS
Dimensions mm(in)
180 x 162 x 61 (7”x 6”x 2”)
Weight kg(lbs)
3.6 (7.9)
Volume
N/A
Color
Off White (NCS 1502-R)
Housing
Aluminum
RF Connectors
DIN 7/16 female
Mounting Kit
Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit)
-40°to +65°(-40°to +149°)
MTBF
Lightning Protection
Safety
10 Million Hours
3 kA 10/350 us; center pin (any port) to shield and 50 kA 10/350 us; shieldshield (Pulse forms per IEC61312-1)
EN60 950
Ingress Protection
IP65, EN 60 529
Environmental
ETS 300 019
EMC
N/A
D031-08227A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-03-18
69
POWERWAVE
Filters
LGP146nn
1900 MHz Duplex filter Outdoor with DC Bypass
TECHNICAL SPECIFICATIONS
Filter Type
Duplex Filter 1900
Range (MHz)
1850-1990
Frequency Range (Full Band MHz)
1850-1910 MHz/1930-1990 MHz
Frequency Range (MHz)
RECEIVE,1850-1910
TRANSMIT, 1930-1990
Insertion Loss (dB)
0.6 dB maximum (Rx)
0.5 dB maximum (Tx)
Return Loss (dB)
Rejection
18 dB minimum
18 dB minumum
40 dB minimum; 1930-1990 MHz
40 dB minimum; 1850-1910 MHz
Average Power Handling (dBm)
Peak Power (dBm)
Intermodulation (IM) (dBc) (Products, Max)
Common+Port
DC Bias/AISG Passthru
N/A
200 watts (+53) minimum
N/A
TRANSMIT, 1000W (+60 dBm) minimum
-110 dBm (-153) maximum in Rx band, two/+43 dBm carriers in the Tx band
TMA supply voltage, fed via the RF cable, +31 V maximum, 1.1 A
-01: DC/AISG to issue
N/A
N/A
2.0 (Rx Port to Antenna
Port)
N/A
MECHANICAL SPECIFICATIONS
Dimensions mm(in)
163 x 181 x 65 (6”x 7”x 3”)
Weight kg(lbs)
3.3 (7.3) maximum
Volume
N/A
Color
Off White (NCS 1502-R)
Housing
Aluminum
RF Connectors
DIN 7/16 female
Mounting_Kit
Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit)
-40°to +65°(-40°to +149°)
MTBF
10 Million Hours
Lightning Protection
IEC 61312-1
Safety
EN 60 950, UL 1950
Ingress Protection
IP65, EN 60 529
Environmental
ETS 300 019
EMC
N/A
D031-08691A
Updated: 2010-01-05
70
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Filters
LGP141nn
Triplex Filter for 900, 1800 MHz and UMTS with DC Transparency
TECHNICAL SPECIFICATIONS
Range (MHz)
Frequency Range (Full Band MHz)
900 Port, 880-960
Peak Power (dBm)
1600 W (+62) PEP
1600 W (+62) PEP
1600 W (+62) PEP
Insertion Loss (dB)
0.1 dB typical (0.2 dB
max.)
0.1 dB typical (0.3 dB
max. Rx, 0.6 dB max.
Tx)
20 dB minimum
350 W (+55) max.
0.1 dB typical (0.5 dB max. Rx, 0.3 dB max. Tx)
3rd Order: -100 dBm;
5th Order: -116 dBm (Rx
band products w/2x43
dBm in Tx band)
-116 dBm (Rx band products w/2x43 dBm in Tx
band)
Return Loss (dB)
Average Power Handling (dBm)
Intermodulation (IM) (dBc) (Products, Max)
880-2170
1800 Port, 1710-1880
20 dB minimum
350 W (+55) max.
3rd Order: -100 dBm;
5th Order: -116 dBm
(Rx band products
w/2x43 dBm in Tx
band)
Isolation Between Ports
UMTS Port, 1920-2170
20 dB minimum
350 W (+55) max.
Rejection Between Ports (except common), >50 dB
Coupled Port
N/A
Common+Port
TMA supply voltage, fed via the RF cable, +/-32 V maximum, 2 A
DC Bias/AISG Passthru -06 (single)
-06: No Connection (DC Grounded)
DC Bias/AISG Passthru -07 (single)
-07: DC/AISG to issue 2.0 (connected all ports)
DC Bias/AISG Passthru -08 (single)
-08: DC/AISG to issue 2.0 (connected to 1800 & UMTS ports)
DC Bias/AISG Passthru -09 (single)
-09: DC/AISG to issue 2.0 (connected to UMTS port)
DC Bias/AISG Passthru -10 (single)
-10: DC/AISG to issue 2.0 (connected to 900 & UMTS ports)
DC Bias/AISG Passthru -11 (twin)
-11: No Connection (DC Grounded)
DC Bias/AISG Passthru -12 (twin)
-12: DC/AISG to issue 2.0 (connected all ports)
DC Bias/AISG Passthru -13 (twin)
-13: DC/AISG to issue 2.0 (connected to 1800 & UMTS ports)
DC Bias/AISG Passthru -14 (twin)
-14: DC/AISG to issue 2.0 (connected to UMTS port)
DC Bias/AISG Passthru -15 (twin)
-15: DC/AISG to issue 2.0 (connected to 900 & UMTS ports)
MECHANICAL SPECIFICATIONS
Dimensions mm(in)
169 x 228 x 69.7 (6.65”x 8.98”x 2.75”)
Weight kg(lbs)
<3.0 (6.5)
Color
Off White (NCS 1502-R)
Housing
Aluminum, IP 65 (Optional IP 68)
RF Connectors
DIN 7/16 female
Coupled Port Connector
N/A
AISG Connector
N/A
Mounting Kit
Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit)
-40° C to +65° C (-40° to +149°)
MTBF
10 Million Hours
Safety
EN 60 950, UL 60 950, ETL
Ingress Protection
IP65, EN 60 529
Environmental
ETS 300 019
D031-08652D
Updated: 2010-07-26
71
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Filters
LGP195nn
Co-Location Filter GSM900
TECHNICAL SPECIFICATIONS
Filter Type
Co-Location Filter GSM900
Frequency Range (MHz)
890-960
Rx Passband Frequency Range (MHz)
-01: 890-915 MHz
-02: 890-915 MHz
-03: 896-915 MHz
Tx Passband Frequency Range (MHz)
-01: 935-960 MHz
-02: 935-960 MHz
-03: 941-960 MHz
Rx Passband Insertion Loss
-01: <1.5 dB (<3.5 dB 890-892 MHz) -02: <1.0 dB (<1.8 dB 890-892 MHz) -03: <1.5 dB (< 3.5 dB 896-898 MHz)
Tx Passband Insertion Loss
< 0.5 dB
Passband Return Loss
Rejection
>18 dB
-01: > 30 dB 869 to 889 MHz
Passband Power Handling (dBm)
-02: > 37 dB 869 to 888 MHz
-03: > 30 dB 869 to 895 MHz
200 watts (+53) minimum, 935 to 960 MHz (-01 & -02), 941 to 960 MHz (-03)
Passband Peak Power Handling (dBm)
1585 watts (+62) minimum, 935 to 960 MHz (-01 & -02), 941 to 960 MHz (-03)
Intermodulation IM dBc Products Max
-110 dBm (-153 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band
MECHANICAL SPECIFICATIONS
Dimensions mm(in)
169 x 228 x 68 (7”x 9”x 2”)
Weight kg(lbs)
3.8 (8.4) maximum
Color
Off White (NCS 1502-R)
Housing
Aluminum, Powder Coated
RF Connectors
DIN 7/16 female
Mounting Kit
Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit)
-5° to +55° (23° to +131° )
Operating Humidity Range
0 to +95% Relative Humidity
MTBF
>10 Million Hours
Ingress Protection
IP65
D031-08692A
Updated: 2010-12-02
72
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Filters
LGP219nn
Diplex Filter for 800/900 MHz and 1800/1900/2100 MHz with
Configurable DC Transparency
TECHNICAL SPECIFICATIONS
Filter Type
Diplex Filter for 800/900 MHz and 1800/1900/2100
Range (MHz)
824-2170
Frequency Range (Full Band MHz)
824-960 MHz/1710-2170 MHz
Frequency Range (MHz)
824-960 Port, 824-960 MHz
1710-2100 Port, 1710-2170 MHz
Insertion Loss (dB)
<0.1 dB Typical
<0.2 dB Typical
Return Loss (dB)
20 dB minimum
20 dB minimum
Rejection
Average Power Handling (dBm)
Peak Power (dBm)
50 dB minimum; 1710-2170 MHz
50 dB minimum; 824-960 MHz
850 MHz: 500 watts (+57); 900 MHz: 350 watts (+55)
350 watts (+55) max.
max.
850 MHz: 5 kW (+67) PEP; GSM: 2.8kW (+64.5) PEP DCS/UMTS: 2.8 kW (+64.5) PEP; PCS: 5 kW (+67) PEP
Intermodulation (IM) (dBc) (Products, Max)
Common+Port
DC Bias/AISG Passthru (single)
DC Bias/AISG Passthru (twin)
-110 dBm (-153) maximum in Rx band, two/+43 dBm carriers in the Tx band
TMA supply voltage, fed via the RF cable, +31 V maximum, 2 A
-01: No Connection (DC
-02: DC/AISG to issue
-03: DC/AISG to issue
-04: DC/AISG to issue
Grounded)
2.0 (connected all ports)
2.0 (1710-2100 Port to
2.0 (824-960 Port to
Antenna Port)
Antenna Port)
-05: No Connection (DC
-06: DC/AISG to issue
-07: DC/AISG to issue
-08: DC/AISG to issue
Grounded)
2.0 (connected all ports)
2.0 (1710-2100 Port to
2.0 (824-960 Port to
Antenna Port)
Antenna Port)
MECHANICAL SPECIFICATIONS
Dimensions mm(in)
112 x 158 x 74 (4”x 6”x 3”)
Weight kg(lbs)
2.5 (5.5) maximum
Volume
1.3 liter single unit
Color
Off White (NCS 1502-R)
Housing
Aluminum
RF Connectors
DIN 7/16 female
Mounting_Kit
Hose Clamps in Stainless Steel
ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit)
-40°to +65°(-40°to +149°)
MTBF
10 Million Hours
Lightning Protection
According to IEC 61312-1, 3kA 10/350 uS;center pin (any port)-shield
Safety
EN 60 950, UL 1950, ETL
Ingress Protection
IP65, EN 60 529
Environmental
ETS 300 019
EMC
ETS 300 342-3
D031-08693C
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-07-26
73
Power wave
Rapid Mobile Deployment
and Enclosure Solutions
Powerwave’s innovative outdoor enclosure and mobile
platform solutions offer flexible combinations of density and
serviceability through state of the art modular design and
construction. Network operators around the world have
made Powerwave’s enclosure and mobile platforms their
premier choice for housing and deploying critical network
infrastructure equipment.
MicroFlex™ Outdoor
Enclosures
RapidFlex™ Mobile
Deployment Unit
SubTerra™ Controlled
Environment Vault
VersaFlex™ Shelter
Solutions
RMDU and Enclosures Solutions
POWERWAVE
MicroFlex™ Outdoor Enclosures
Rapid Mobile Deployment and Enclosure Solutions
MicroFlex Outdoor Enclosures
Title
Part Number
Page
MicroFlex Low-Profile Enclosure for
Backhaul and E911 Applications
MF0-004-000-002
77
MicroFlex 48RU Outdoor Enclosure
MF0-048-000-001
78
76
MicroFlex
POWERWAVE
MF0-004-000-002
MicroFlex Low-Profile Enclosure for Backhaul and E911
Applications
Powerwave’s Microflex outdoor enclosure provides 4RU of rack space in a compact foot print. The complete Microflex enclosure product line is configured to order with
interchangeable options and accessories.
GENERAL SPECIFICATIONS
Material High Strength
High Strength Corrosion Resistant Aluminum Construction
Finish
TGIC Powdercoat, Color RAL 7035
WEIGHTS & MEASURES
Dimensions mm(in)
914 x 685 x 254 (36 x 27 x 10)
Weight kg(lbs)
40 (88) (baseline configuration)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
-10°C to 50°C
Wind m/s (mph)
67 (150)
Audible Noise (db-A)
57.0 (not including installed equipment)
Thermal Electric Cooling Power
200W (calculated 190W @ dT = 0 degree C +/- 10%)
ELECTRICAL SPECIFICATIONS
Rated Current (max.)
11.3A/5.5A @ +24VDC/-48VDC
Start-up Current (max.)
14.1A/7.0A @ +24VDC/-48VDC
COMPLIANCE (pending)
GR487 CORE
UL50
CE
RoHS
IP55
Updated: 2010-07-21
77
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
MF0-048-000-001
MicroFlex
MicroFlex 48RU Outdoor Enclosure
Powerwave’s Microflex outdoor enclosure provides 48RU of rack space in a compact foot print. The complete Microflex enclosure product line is configured to order
with interchangeable options and accessories.
GENERAL SPECIFICATIONS
Material High Strength
High Strength Corrosion Resistant Aluminum Construction
Finish
TGIC Powdercoat, Color RAL 7035
WEIGHTS & MEASURES
Dimensions mm(in)
2400mm H x 1755mm W x 817mm D (94.5in H x 70.0in W x 32.0in D)
Weight kg(lbs)
436 kg ( 961lbs) (Cabinet only, no equipment)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
-50°C to 70°C (Internal temperature is dependant on equipment heat load and thermal management options)
Wind m/s (mph)
67 (150)
Audible Noise (db-A)
57.0 to 65 (depending on thermal management)
COMPLIANCE
GR487 CORE
UL50
CE
RoHS
IP55
Updated: 2010-12-09
78
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
RMDU and Enclosures Solutions
POWERWAVE
RapidFlex™ Mobile Deployment Unit
Rapid Mobile Deployment and Enclosure Solutions
RapidFlex Mobile Deployment Unit
Title
RapidFlex Mobile Deployment Unit
Part Number
Page
CW0-000-000-003
80
79
POWERWAVE
CW0-000-000-003
RapidFlex
RapidFlex Mobile Deployment Unit (RMDU)
GENERAL SPECIFICATIONS
Axle: Quantity
Dual Tandem HD
Axle: Type
Straight
Brakes
Electric
Suspension
Leaf
Wheel Bolt Pattern
8 Bolt
Safety Chains
Yes
12V Trailer End Connector
7-Way
Coax Real
Up to (24) 1/2” Coax or (6) 7/8” Coax + 1” flexible conduit
Diesel Generator,Weather Proof Sound Attenuated Enclosure
Up to 50kW Diesel with optional extended run time fuel tank
7-Bay Telecommunications Shelter
Yes
Hydraulic Auto Leveling
Yes
Micro Footprint, Hydraulic Powered Outriggers
Yes
WEIGHTS & MEASURES
Trailer Width
7’6”
Trailer Length
34’
Travel Length
36’
Overall Width
7’6”
Overall Height
13’ 6”
Platform Height
24”
Tire Size/Type
235-75R17.5
Hitch Ball Size
Gooseneck 2 5/16”
Hitch Weight (lbs)
3,000
Curb Weight (lbs)
20,000
GVWR (lbs)
30,000
GAWR (lbs)
15,000
Average Payload Capacity (lbs)
10,000
Tower Height (ft)
98’
Maximum Tower Loading (lbs)
650
ACCESSORIES INCLUDED
Full-size spare tire
Tire changing tool kit
Safety pull-away chains
Sealed beam DOT lighting package and reflective striping
(complies w/ DOT Federal Motor Carrier safety regulations in all
50 states)
7-way electrical hook-up
Operation and maintenance manuals
Lockable tool box
Complete system grounding kit
Self-guy kit
ADDITIONAL OPTIONS AVAILABLE
Automatic Transfer Switch
Extended Run Double Wall Fuel Tank
FAA aviation obstruction lighting kit
Heavy duty copper keeper
Extended Run Double Wall Fuel Tank
3-way antenna mount
Wind Speed Anemometer
Wireless Platform Access and Control, PDA
*All dimensions are nominal and specifications are subject to change without notice.
Updated: 2010-12-29
80
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
RMDU and Enclosures Solutions
POWERWAVE
SubTerra™ Controlled Environment Vault
Rapid Mobile Deployment and Enclosure Solutions
SubTerra Controlled Environment Vault
Title
Part Number
Page
SubTerra Controlled Environment Vault
CEV-000-000-001
82
81
SubTerra
POWERWAVE
CEV-000-000-001
SubTerra Controlled Environment Vault
Powerwave’s Controlled Environment Vault provides 184RU of rack space in a compact foot print. The complete CEV product line is configured to order with
interchangeable options and accessories.
GENERAL SPECIFICATIONS
Material High Strength
Fiberglass and High Strength Corrosion Resistant Aluminum Construction
Finish
Brushed Aluminum
WEIGHTS & MEASURES
Dimensions mm(in)
3860 x 1955 x 3505 (152 x 77 x 138)
Weight kg(lbs)
3401 (7500) (baseline configuration)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
-40°C to 60°C (Internal temperature is dependant on equipment heat load and thermal management options)
Wind m/s (mph)
67 (150)
Audible Noise (db-A)
57.0 to 65 (depending on thermal management options)
COMPLIANCE
Designed to GR487 CORE
UL Listed
CE
RoHS
Designed to IP55
Updated: 2010-12-09
82
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
RMDU and Enclosures Solutions
POWERWAVE
VersaFlex™ Shelter Solutions
Rapid Mobile Deployment and Enclosure Solutions
VersaFlex Shelter Solutions
Title
Dimensions (ft)
Weight (lbs)
Page
VersaFlex 7.0 High-Cube Outdoor Shelter
2591 x 3048 x 2286 mm (102 x 120 x 90)
1590 (3500)
84
VersaFlex 9.0 High-Cube Outdoor Shelter
2591 x 4191 x 2286 mm (102 x 165 x 90)
1814 (4000)
85
83
POWERWAVE
VersaFlex
VersaFlex (7 Bay)
VersaFlex Enclosure Solutions
SPECIFICATIONS
Length ft (m)
10 (3.05)
Width ft (m)
7’6” (2.29)
Height in (m)
8’6: (2.59)
Weight lbs (kg)
4000 (1814)
HVAC
2x3 Ton
Radio Frames
7
Minimum Lease Required
10L x 7’6”W = 75 Sq. Ft. (3.05L x 2.29W = 6.98m2)
1RWH:HLJKWVDQGOHQJWKVDUHDSSUR[LPDWHPHDVXUHPHQWVDQGZLOOYDU\EDVHGRQVSHFLILFFXVWRPHUUHTXLUHPHQWV
$OOVSHFLILFDWLRQVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH3OHDVHFRQWDFW\RXU3RZHUZDYHUHSUHVHQWDWLYHIRUFRPSOHWHSHUIRUPDQFHGDWD
Key Features/Benefits:
.
.
.
.
.
Utilizes approximately half the space of
traditional Shelters.
Standard weighs only 4,000 lbs (1814 kg) vs.
the 30,000 (13608 kg) to 50,000 lbs (22680
kg) of traditional shelters.
Internal sub-floor HVAC system that
eliminates hot spots.
Sliding door design reduces lease area
requirements by eliminating door swing.
Sliding equipment racks that reduce floor
space required and utilizes a rolling cable
tray
VersaFlex (7 Bay) Enclosure
D031-08439 Rev. D 07/08
Updated: 2010-07-21
84
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
VersaFlex
VersaFlex (9 Bay)
VersaFlex Enclosure Solutions
SPECIFICATIONS
Length ft (m)
13’9” (4.19)
Width ft (m)
7’6” (2.29)
Height in (m)
8’6: (2.59)
Weight lbs (kg)
4750 (2155)
HVAC
2x5 Ton
Radio Frames
9
Minimum Lease Required
13’9”L x 7’6”W = 103.1 Sq. Ft (4.19L x 2.29W = 9.60m2)
1RWH:HLJKWVDQGOHQJWKVDUHDSSUR[LPDWHPHDVXUHPHQWVDQGZLOOYDU\EDVHGRQVSHFLILFFXVWRPHUUHTXLUHPHQWV
$OOVSHFLILFDWLRQVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH3OHDVHFRQWDFW\RXU3RZHUZDYHUHSUHVHQWDWLYHIRUFRPSOHWHSHUIRUPDQFHGDWD
Key Features/Benefits:
.
.
.
.
.
Utilizes approximately half the space of
traditional Shelters.
Standard weighs only 4,000 lbs (1814 kg) vs.
the 30,000 (13608 kg) to 50,000 lbs (22680
kg) of traditional shelters.
Internal sub-floor HVAC system that
eliminates hot spots.
Sliding door design reduces lease area
requirements by eliminating door swing.
Sliding equipment racks that reduce floor
space required and utilizes a rolling cable
tray
VersaFlex (9 Bay) Enclosure
D031-08439 Rev. D 07/08
Updated: 2010-07-21
85
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
RMDU and Enclosure Solutions
POWERWAVE
Rapid Mobile Deployment and Enclosure Solutions
Page
MicroFlex™ Outdoor Enclosures
76
RapidFlex™ Mobile Deployment Unit
79
SubTerra™ Controlled Environment Vault
81
VersaFlex™ Shelter Solutions
83
75
Power wave
Coverage Products
Powerwave’s Coverage products include turn- key
coverage and capacity products and solutions that give
network operators, facilities owners and neutral hosts an
edge over the competition. We specialize in innovative
products and solutions from the simplest to the most
challenging indoor and outdoor environments that help
improve coverage, signal quality and capacity. Our efficient,
modular and integrated solutions drive down capital and
operating expenses.
Repeater Products
In-Building and Outdoor
DAS Products
Repeater Remote
Management Products
Coverage Products
POWERWAVE
Coverage Products
Repeater Products
Page
Channel Selective Standard Repeaters
89
Band Selective Compact Repeaters
113
Band Selective Standard Repeaters
144
Advanced Train Repeaters
157
Digital Repeaters
162
In-Building and Outdoor DAS Products, Public Safety Networks
Page
Bi-Directional Amplifiers
167
LinkNet™ Convergence Platform
170
Optical and RF Conversion Modules
178
Tap-In® Signal Taps
179
Nexus™FT - Public Safety
181
In-Building and Outdoor DAS Products, Commercial
Page
Wide Band Radio Heads
183
Nexus FT Single and Dual Band
186
Nexus FT Rack Mounts
221
Repeater Remote Management
Page
IP/SNMP/GPS Repeater Remote Management Interface
87
226
Power wave
Repeater Products
Repeater products provide cost-effective coverage solutions
for airports, railway stations, tunnels, convention centers,
canyons and other environments where structures or
natural obstructions interfere with signals. What sets
Powerwave repeater products apart is our exceptionally low
total lifetime cost. This is due to a number of factors. Our
high level of integration delivers a compact form factor that
eliminates/minimizes site rental costs.
Channel Selective
Standard Repeaters
Band Selective
Compact Repeaters
Band Selective
Standard Repeaters
Advanced Train Repeaters
Digital Repeaters
Coverage Products
POWERWAVE
Channel Selective Standard Repeaters
Repeater Products
Title
Range (MHz)
Upgrade Standard
Channel Selective,1800 GSM
MHz
Upgrade Standard
Channel Selective,2100 GSM
MHz
No. of Channels
Bandwidth
Part Number
Page
4
200 KHz/channel
AR0027/50409
91
2
200 KHz/channel
AR0065/00109
92
Standard Channel
Selective, 900 MHz
RGSM
2 or 4
200 KHz/channel
AR1700/80
93
Standard Channel
Selective, 900 MHz
EGSM
4
200 KHz/channel
AR1700/90419
94
Standard Channel
Selective, 900 MHz
EGSM
4
200 KHz/channel
AR1700/90409
95
Standard Channel
Selective, 900 MHz
EGSM
2
200 KHz/channel
AR1700/90209
96
Standard Channel
Selective, 900 MHz
GSM
6
200 KHz/channel
AR1717/90609
97
Standard Channel
Selective, 1800 MHz
GSM
2
200 KHz/channel
AR2700/50209
98
Standard Channel
Selective, 1800 MHz
GSM
4
200 KHz/channel
AR2700/50409
99
Standard Channel
Selective, 1800 MHz
GSM
6
200 KHz/channel
AR2727/50609
100
Standard Channel
Selective,1900 MHz
GSM
4
200 KHz/channel
AR3700/50409
101
Standard Channel
Selective, 2100 MHz
WCDMA
2
4.4 MHz/channel
AR6500/00109
102
WCDMA2100
2
4.4 MHz/channel
AR6512/00239
103
WCDMA2100
2
4.4 MHz/channel
AR6512/00229
104
WCDMA2100
2
4.4 MHz/channel
AR6517/01429
105
WCDMA2100
2
200 KHz/channel
AR6517/01439
106
Standard Dual Band
Channel Selective,
2100MHz
Standard Repeater
Dual Band Channel
Selective, 2100MHz
Standard Dual Band
Channel Selective,
2100MHz
Standard Channel
Selective, 2100 MHz
89
Coverage Products
POWERWAVE
Channel Selective Standard Repeaters
Repeater Products
Title
Range (MHz)
No. of Channels
Bandwidth
Part Number
Standard Channel
Selective, 2100 MHz
WCDMA2100
2
200 KHz/channel
AR6517/01429
107
Standard Channel
Selective, 2100 MHz
WCDMA2100
2
200 KHz/channel
AR6517/01459
108
Standard Channel
Selective, 2100 MHz
WCDMA2100
1 to 2
200 KHz/channel
AR6522/01100
109
Dual Band Channel
Selective 2100/1800
WCDMA2100
1 to 2
4.4 MHz/channel
AR6522/01109
110
Dual Band Channel
Selective, 2100 MHz
WCDMA2100
2
4.4 MHz/channel
AR6522/91100
111
Standard Channel
Selective, 2100 MHz
WCDMA2100
2
4.4 MHz/channel
AR6560/00209
112
90
Page
POWERWAVE
AR0027/50409
Channel Selective Standard Repeaters
Upgrade Standard Repeater Channel Selective 1800MHz GSM, 4CH,
Stand Alone, Seperated Donor/Service
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
N/A
N/A
GSM1800
1710-1785
Frequency Band DL (MHz)
N/A
1805-1880
No. of Channels
N/A
4
Bandwidth (MHz)
N/A
200 KHz/channel
Output Power DL
N/A
+28 dBm/channel
Output Power UL
N/A
+28 dBm/channel
Gain adjustment range
N/A
55 to 90 dB
Noise Figure
N/A
4 dB
Group Delay
N/A
6 µs
Section
Bottom Section
Door Section
Power Supply
N/A
115/230 VAC
Power Supply (Optional)
N/A
N/A
Power Consumption
N/A
250 W
Section
Bottom Section
Door Section
Type
N/A
N/A
Wireless MOD EM Frequencies
N/A
N/A
Packet Data Mode
N/A
N/A
Fallback Circuit Switched Mode
N/A
N/A
Northbound Traffic
N/A
N/A
Maintenance
N/A
N/A
Remote Management
N/A
N/A
Section
Bottom Section
Door Section
RF Connection
N/A
N-female
Dimension (WxHxD) mm (ft)
N/A
440 x 530 x 195 (1’5”x1’9”x8”)
Weight kg (lbs)
N/A
22 (48)
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
N/A
-13 to +131 (-25 to +55)
N/A
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
N/A
TS 45.005
Regulatory Compliance EMC
N/A
EN 301 489-1
ACCR
EVM
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
*Stand alone
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-08
91
POWERWAVE
AR0065/00109
Channel Selective Standard Repeaters
UPGRADE STANDARD REPEATER CHANNEL SELECTIVE
2100MHz WCDMA, 2CH, STAND ALONE, SEPARATE DONOR AND
SERVICE
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
N/A
N/A
WCDMA 2100
1920 -1980
Frequency Band DL (MHz)
N/A
2110 - 2170
No. of Channels
N/A
2
Bandwidth (MHz)
N/A
4.4 channel
Output Power DL
N/A
2ch +25 dBm/channel
Output Power UL
N/A
2ch +15 dBm/channel
Gain adjustment range
N/A
55 to 85 dB
Noise Figure
N/A
DL 6 dBUL 4 dB
Group Delay
N/A
6 µs
ACCR
N/A
EVM
N/A
TECHNICAL SPECIFICATIONS*
Section
Bottom Section
Door Section
Power Supply
N/A
115/230 VAC
Power Supply (Optional)
N/A
N/A
Power Consumption
N/A
160 W
Section
Bottom Section
Door Section
Type
N/A
N/A
Wireless MOD EM Frequencies
N/A
N/A
Packet Data Mode
N/A
N/A
Fallback Circuit Switched Mode
N/A
N/A
Northbound Traffic
N/A
N/A
Maintenance
N/A
N/A
Remote Management
N/A
N/A
Section
Bottom Section
Door Section
RF Connection
N/A
N-female
Dimension (WxHxD) mm (ft)
N/A
440 x 530 x 195 (1’5”x1’9”x8”)
Weight kg (lbs)
N/A
22 (48)
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
N/A
-13 to +131 (-25 to +55)
N/A
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
N/A
TS 125 106
Regulatory Compliance EMC
N/A
TS 125 113
REMOTE CONTROL*
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
*Stand alone
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-08
92
POWERWAVE
AR1700/80
Channel Selective Standard Repeaters
Standard Channel Selective, GSM-R 900MHz
ELECTRICAL DATA*
Range
GSM-R
Frequency Band UL (MHz)
876-880
Frequency Band DL (MHz)
921-925
No. of Channels
2 or 4
Bandwidth
Output Power DL (min)
200 KHz/channel
Output Power UL (min)
2ch: +33 dBm/channel, 4ch: +29 dBm/channel
Gain adjustment range
55 to 90 dB
Noise Figure
4 dB
Group Delay
5 µs
2ch: +33 dBm/channel, 4ch: +29 dBm/channel
ACCR
EVM
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
21-60 VDC (optional)
2ch: 160W, 4ch: 250W
REMOTE CONTROL
Type
Wireless MOD EM Frequencies
Packet Data Mode
Fallback Circuit Switched Mode
Northbound Traffic
Maintenance
Remote Management
MECHANICAL DATA*
RF Connection
N-female (7/16 option)
Dimension (WxHxD) mm (ft)
440x530x195 (1’5”x1’9”x8”)
Weight kg (lbs)
22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
Regulatory Compliance EMC
* All specifications subject to change.
TS 45.005
EN 301 489-1
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-08
93
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR1700/90419
Channel Selective Standard Repeaters
STANDARD CH SEL REPEATER 900MHz EGSM,4CH,AC PSU,7/16
CON,GSM/GPRS REMOTE CONTROL,DOOR SW,LOCK-KEYS
ELECTRICAL DATA*
Range
EGSM
Frequency Band UL (MHz)
880-915
Frequency Band DL (MHz)
925-960
No. of Channels
4
Bandwidth
Output Power DL (min)
200 KHz/channel
Output Power UL (min)
+29 dBm/channel
Gain adjustment range
55 to 90 dB
Noise Figure
4 dB
Group Delay
6 µs
ACCR
-
EVM
-
+29 dBm/channel
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
N/A
250W
REMOTE CONTROL
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
7/16-female
Dimension (WxHxD) mm (ft)
440x530x195[280] (1’5”x1’9”x8” [11”])
Weight kg (lbs)
22[37]
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
Regulatory Compliance EMC
* All specifications subject to change.
TS 45.005
EN 301 489-1
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-14
94
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR1700/90409
Channel Selective Standard Repeaters
STANDARD CH SEL REPEATER 900MHz EGSM, 4CH, GSM/GPRS
REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range
EGSM
Frequency Band UL (MHz)
880-915
Frequency Band DL (MHz)
925-960
No. of Channels
4
Bandwidth
Output Power DL (min)
200 KHz/channel
Output Power UL (min)
+29 dBm/channel
Gain adjustment range
55 to 90 dB
Noise Figure
4 dB
Group Delay
6 µs
ACCR
-
EVM
-
+29 dBm/channel
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
N/A
250W
REMOTE CONTROL
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195[280] (1’5”x1’9”x8” [11”])
Weight kg (lbs)
22[37]
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
Regulatory Compliance EMC
* All specifications subject to change.
TS 45.005
EN 301 489-1
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-14
95
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR1700/90209
Channel Selective Standard Repeaters
STANDARD CHANNEL SELECTIVE REPEATER 900MHz EGSM, 2CH,
GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range
EGSM
Frequency Band UL (MHz)
880-915
Frequency Band DL (MHz)
925-960
No. of Channels
2
Bandwidth
Output Power DL (min)
200 KHz/channel
Output Power UL (min)
+33 dBm/channel
Gain adjustment range
55 to 90 dB
Noise Figure
4 dB
Group Delay
6 µs
ACCR
-
EVM
-
+33 dBm/channel
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
N/A
160W
REMOTE CONTROL
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195[280] (1’5”x1’9”x8” [11”])
Weight kg (lbs)
22[37]
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
Regulatory Compliance EMC
* All specifications subject to change.
TS 45.005
EN 301 489-1
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-08
96
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR1717/90609
Channel Selective Standard Repeaters
STANDARD CHANNEL SELECTIVE REPEATER 900MHz EGSM, 6CH,
GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range
EGSM
Frequency Band UL (MHz)
880-915
Frequency Band DL (MHz)
925-960
No. of Channels
6
Bandwidth
Output Power DL (min)
200 KHz/channel
Output Power UL (min)
+26 dBm/channel
Gain adjustment range
55 to 90 dB
Noise Figure
4 dB
Group Delay
6 µs
ACCR
-
EVM
-
+26 dBm/channel
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
N/A
410W (2 Separate PSU’s)
REMOTE CONTROL
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195[280] (1’5”x1’9”x8” [11”])
Weight kg (lbs)
48[82]
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
Regulatory Compliance EMC
* All specifications subject to change.
TS 45.005
EN 301 489-1
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-08
97
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR2700/50209
Channel Selective Standard Repeaters
STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM, 2CH,
GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range
GSM
Frequency Band UL (MHz)
1710-1785
Frequency Band DL (MHz)
1805-1880
No. of Channels
2
Bandwidth
Output Power DL (min)
200 KHz/channel
Output Power UL (min)
+32 dBm
Gain adjustment range
55 to 90 dB
Noise Figure
4 dB
Group Delay
6 µs
ACCR
-
EVM
-
+32 dBm
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
N/A
160W
REMOTE CONTROL
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWV 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195 (1’5”x1’9”x8”)
Weight kg (lbs)
22[37]
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
Regulatory Compliance EMC
* All specifications subject to change.
TS 45.005
EN 301 489-1
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-08
98
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR2700/50409
Channel Selective Standard Repeaters
STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM, 4CH,
GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range
GSM
Frequency Band UL (MHz)
1710-1785
Frequency Band DL (MHz)
1805-1880
No. of Channels
4
Bandwidth
Output Power DL (min)
200 KHz/channel
Output Power UL (min)
+28 dBm/channel
Gain adjustment range
55 to 90 dB
Noise Figure
4 dB
Group Delay
6 µs
ACCR
-
EVM
-
+28 dBm/channel
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
N/A
160W
REMOTE CONTROL
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWV 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195 (1’5”x1’9”x8”)
Weight kg (lbs)
22[37]
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
Regulatory Compliance EMC
* All specifications subject to change.
TS 45.005
EN 301 489-1
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-14
99
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR2727/50609
Channel Selective Standard Repeaters
STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM, 6CH,
GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range
GSM
Frequency Band UL (MHz)
1710-1785
Frequency Band DL (MHz)
1805-1880
No. of Channels
6
Bandwidth
Output Power DL (min)
200 KHz/channel
Output Power UL (min)
+25 dBm/channel
Gain adjustment range
55 to 90 dB
Noise Figure
4 dB
Group Delay
6 µs
ACCR
-
EVM
-
+25 dBm/channel
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
N/A
410W
REMOTE CONTROL
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x280 (1’5”x1’9”x11”)
Weight kg (lbs)
(48[82])
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
Regulatory Compliance EMC
* All specifications subject to change.
TS 45.005
EN 301 489-1
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-08
100
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR3700/50409
Channel Selective Standard Repeaters
STANDARD CHANNEL SELECTIVE REPEATER 1900MHz GSM, 4CH,
850/1900 MHz GSM/GPRS REMOTE CONTROL, DOOR SW,LOCK-KEYS
ELECTRICAL DATA*
Range
GSM
Frequency Band UL (MHz)
1850-1910
Frequency Band DL (MHz)
1930-1990
No. of Channels
4
Bandwidth
Output Power DL (min)
200 KHz/channel
Output Power UL (min)
+28 dBm/channel
Gain adjustment range
55 to 90 dB
Noise Figure
4 dB
Group Delay
6 µs
ACCR
-
EVM
-
+28 dBm/channel
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
NA
4ch: 250W
REMOTE CONTROL
Type
IP/SNMP: 850/1900 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
850 / 1900 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female (7/16 option)
Dimension (WxHxD) mm (ft)
440x530x195 (1’5”x1’9”x8”)
Weight kg (lbs)
22(48)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
Regulatory Compliance EMC
* All specifications subject to change.
TS 45.005
EN 301 489-1
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-08
101
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR6500/00109
Channel Selective Standard Repeaters
Standard Channel Selective Repeater 2100MHz WCDMA, 2Channel,
GSM/GPRS REMOTE CONTROL, DOOR Switch
ELECTRICAL DATA*
Range
WCDMA
Frequency Band UL (MHz)
1920 -1980
Frequency Band DL (MHz)
2110 - 2170
No. of Channels
2ch
Bandwidth
Output Power DL (min)
4.4 MHz/channel
Output Power UL (min)
+15 dBm/channel
Gain adjustment range
DL 55 to 85 dB, UL 55 to 85 dB
Noise Figure
DL 6 dB, UL 4 dB
Group Delay
6 µs
+25 dBm channel
ACCR
EVM
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
NA
160 W
REMOTE CONTROL
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195 (1’5”x1’9”x8”)
Weight kg (lbs)
22[37]
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
Regulatory Compliance EMC
* All specifications subject to change.
TS 125 106
TS 125 113
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-08
102
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR6512/00239
Channel Selective Standard Repeaters
Standard Repeater DualBand Channel Selective 2100MHz WCDMA,
2Ch / Band Selective 900MHz GSM, 25MHz Bandwidth, GSM/GPRS
REM CTRL, Separated Donor and Combined Service, Door Switch
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
WCDMA2100
1920 -1980
GSM 900
890-915
Frequency Band DL (MHz)
2110 - 2170
935-960
No. of Channels
2ch
Band Selective
Bandwidth (MHz)
4.4 channel
25 MHz
Output Power DL
+24 dBm channel
+25 dBm composite
Output Power UL
+15 dBm/channel
+26 dBm composite
Gain adjustment range
55 to 85 dB
55 to 85 dB
Noise Figure
UL 5 dB, DL 7 dB
6 dB
Group Delay
6 µs
6 µs
Section
Bottom Section
Door Section
Power Supply
115/230 VAC
115/230 VAC
Power Supply (Optional)
NA
NA
Power Consumption
160 W
200W
Door Section
Wireless MOD EM Frequencies
Bottom Section
IP/SNMP: 900/1800 Dual Mode Wireless GPRS
Packet Data Interface
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NWM 3.2.2 and greater; local web interface
ACCR
EVM
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Maintenance
Remote Management
MECHANICAL DATA*
Section
Bottom Section
Door Section
RF Connection
N-female
N-female
Dimension (WxHxD) mm (ft)
440 x 530 x 280 (1’ 5”x1’9”x11”)
N/A
Weight kg (lbs)
37 (82)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 125 106
TS 45.005
Regulatory Compliance EMC
TS 125 113
EN 301 489-1
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
103
POWERWAVE
AR6512/00229
Channel Selective Standard Repeaters
Standard Repeater Dual Band Channel Selective 2100MHz WCDMA,
2Ch / Band Selective 900MHz GSM, 25MHz Bandwidth, GSM/GPRS
REM CTRL, Combined Donor and Service, Door Switch
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
WCDMA2100
1920 -1980
GSM 900
890-915
Frequency Band DL (MHz)
2110 - 2170
925-960
No. of Channels
2ch
Broad band
Bandwidth (MHz)
4.4 channel
25 MHz
Output Power DL
+24 dBm/channel
24 dBm composite
Output Power UL
+14 dBm/channel
24 dBm composite
Gain adjustment range
55 to 85 dB
55 to 85 dB
Noise Figure
UL 6 dB, DL 8 dB
7 dB
Group Delay
6 µs
6 µs
Section
Bottom Section
Door Section
Power Supply
115/230 VAC
115/230 VAC
Power Supply (Optional)
NA
NA
Power Consumption
160 W
200W
Door Section
Wireless MOD EM Frequencies
Bottom Section
IP/SNMP: 900/1800 Dual Mode Wireless GPRS
Packet Data Interface
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
NA
Fallback Circuit Switched Mode
GSM
NA
Northbound Traffic
SNMP v1, v2c and http
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NWM 3.2.2 and greater; local web interface
NA
Section
Bottom Section
Door Section
RF Connection
N-female
N-female
Dimension (WxHxD) mm (ft)
440 x 530 x 280 (1’ 5”x1’9”x11”)
N/A
Weight kg (lbs)
37 (82)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 125 106
TS 45.005
Regulatory Compliance EMC
TS 125 113
EN 301 489-1
ACCR
EVM
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Maintenance
Remote Management
NA
NA
NA
NA
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
104
POWERWAVE
AR6517/01429
Channel Selective Standard Repeaters
Standard Repeater Dual Band Channel Selective 2100MHz WCDMA,
2Ch / 900MHz GSM, 4Ch, GSM/GPRS REM CTRL, Combined Donor
and Service, Door Switch
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
WCDMA2100
1920 -1980
GSM 900
890 - 915
Frequency Band DL (MHz)
2110 - 2170
935 - 960
No. of Channels
2ch
4ch
Bandwidth (MHz)
4.4 channel
200 KHz/channel
Output Power DL
+24 dBm/channel
+28 dBm/channel
Output Power UL
+14 dBm/channel
N/A
Gain adjustment range
55 to 85 dB
55 to 90 dB
Noise Figure
UL 6 dB DL 8 dB
5 dB
Group Delay
6 µs
6 µs
ACCR
-
-
EVM
-
-
Section
Bottom Section
Door Section
Power Supply
115/230 VAC
115/230 VAC
Power Supply (Optional)
NA
NA
Power Consumption
160 W
250W
Door Section
Wireless MOD EM Frequencies
Bottom Section
IP/SNMP: 900/1800 Dual Mode Wireless GPRS
Packet Data Interface
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
NA
Fallback Circuit Switched Mode
GSM
NA
Northbound Traffic
SNMP v1, v2c and http
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NWM 3.2.2 and greater; local web interface
NA
Section
Bottom Section
Door Section
RF Connection
N-female
N-female
Dimension (WxHxD) mm (ft)
440 x 530 x 280 (1’ 5”x1’9”x11”)
N/A
Weight kg (lbs)
37 (82)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 125 106
TS 45.005
Regulatory Compliance EMC
TS 125 113
EN 301 489-1
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Maintenance
Remote Management
NA
NA
NA
NA
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-06
105
POWERWAVE
AR6517/01439
Channel Selective Standard Repeaters
Standard Repeater DualBand Channel Selective 2100MHz WCDMA,
2Ch / 900MHz GSM, 4Ch, GSM/GPRS REM CTRL, Separated Donor
and Combined Service, Door Switch
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
WCDMA2100
1920 -1980
GSM 900
890 - 915
Frequency Band DL (MHz)
2110 - 2170
935 - 960
No. of Channels
2ch
4ch
Bandwidth (MHz)
4.4 channel
200 KHz/channel
Output Power DL
+24 dBm/channel
+28 dBm/channel
Output Power UL
+15 dBm/channel
+29 dBm/channel
Gain adjustment range
55 to 85 dB
55 to 90 dB
Noise Figure
UL 5 dB DL 7 dB
4 dB
Group Delay
6 µs
6 µs
ACCR
-
-
EVM
-
-
Section
Bottom Section
Door Section
Power Supply
115/230 VAC
115/230 VAC
Power Supply (Optional)
NA
NA
Power Consumption
160 W
250W
Door Section
Wireless MOD EM Frequencies
Bottom Section
IP/SNMP: 900/1800 Dual Mode Wireless GPRS
Packet Data Interface
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
NA
Fallback Circuit Switched Mode
GSM
NA
Northbound Traffic
SNMP v1, v2c and http
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NWM 3.2.2 and greater; local web interface
NA
Section
Bottom Section
Door Section
RF Connection
N-female
N-female
Dimension (WxHxD) mm (ft)
440 x 530 x 280 (1’ 5”x1’9”x11”)
N/A
Weight kg (lbs)
37 (82)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 125 106
TS 45.005
Regulatory Compliance EMC
TS 125 113
EN 301 489-1
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Maintenance
Remote Management
NA
NA
NA
NA
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-06
106
POWERWAVE
AR6517/01429
Channel Selective Standard Repeaters
Standard Repeater Dual Band Channel Selective 2100MHz WCDMA,
2Ch / 900MHz GSM, 4Ch, GSM/GPRS REM CTRL, Combined Donor
and Service, Door Switch
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
WCDMA2100
1920 -1980
GSM 900
890 - 915
Frequency Band DL (MHz)
2110 - 2170
935 - 960
No. of Channels
2ch
4ch
Bandwidth (MHz)
4.4 channel
200 KHz/channel
Output Power DL
+24 dBm/channel
+28 dBm/channel
Output Power UL
+14 dBm/channel
N/A
Gain adjustment range
55 to 85 dB
55 to 90 dB
Noise Figure
UL 6 dB DL 8 dB
5 dB
Group Delay
6 µs
6 µs
ACCR
-
-
EVM
-
-
Section
Bottom Section
Door Section
Power Supply
115/230 VAC
115/230 VAC
Power Supply (Optional)
NA
NA
Power Consumption
160 W
250W
Door Section
Wireless MOD EM Frequencies
Bottom Section
IP/SNMP: 900/1800 Dual Mode Wireless GPRS
Packet Data Interface
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
NA
Fallback Circuit Switched Mode
GSM
NA
Northbound Traffic
SNMP v1, v2c and http
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NWM 3.2.2 and greater; local web interface
NA
Section
Bottom Section
Door Section
RF Connection
N-female
N-female
Dimension (WxHxD) mm (ft)
440 x 530 x 280 (1’ 5”x1’9”x11”)
N/A
Weight kg (lbs)
37 (82)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 125 106
TS 45.005
Regulatory Compliance EMC
TS 125 113
EN 301 489-1
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Maintenance
Remote Management
NA
NA
NA
NA
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-06
107
POWERWAVE
AR6517/01459
Channel Selective Standard Repeaters
Standard Repeater DualBand Channel Selective 2100MHz WCDMA,
2Channels / 900MHz EGSM, 4Channels, AC PSU, 7/16 Connectors,
GSM/GPRS REM CTRL, Separated Donor and Combined Service,
DOOR Switch, LOCK-KEYS
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
WCDMA2100
1920 -1980
GSM 900
890 - 915
Frequency Band DL (MHz)
2110 - 2170
935 - 960
No. of Channels
2ch
4ch
Bandwidth (MHz)
4.4 channel
200 KHz/channel
Output Power DL
+24 dBm channel
+28 dBm/channel
Output Power UL
+15 dBm/channel
+29 dBm/channel
Gain adjustment range
55 to 85 dB
55 to 90 dB
Noise Figure
UL 5 dB DL 7 dB
4 dB
Group Delay
6 µs
6 µs
ACCR
-
-
EVM
-
-
Section
Bottom Section
Door Section
Power Supply
115/230 VAC
115/230 VAC
Power Supply (Optional)
NA
NA
Power Consumption
160 W
250W
Door Section
Wireless MOD EM Frequencies
Bottom Section
IP/SNMP: 900/1800 Dual Mode Wireless GPRS
Packet Data Interface
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
NA
Fallback Circuit Switched Mode
GSM
NA
Northbound Traffic
SNMP v1, v2c and http
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NWM 3.2.2 and greater; local web interface
NA
Section
Bottom Section
Door Section
RF Connection
7/16 female
7/16 female
Dimension (WxHxD) mm (ft)
440 x 530 x 280 (1’ 5”x1’9”x11”)
N/A
Weight kg (lbs)
37 (82)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 125 106
TS 45.005
Regulatory Compliance EMC
TS 125 113
EN 301 489-1
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Maintenance
Remote Management
NA
NA
NA
NA
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
Updated: 2010-12-06
108
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR6522/01100
Channel Selective Standard Repeaters
Dual Band 2100/1800LB Channel Selective/Band Selective
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
WCDMA2100
1920 -1980
GSM 1800 LB
1710-1765
Frequency Band DL (MHz)
2110 - 2170
1805-1860
No. of Channels
1 to 2
Broad band
Bandwidth (MHz)
4.4 channel
16.9 MHz
Output Power DL
1ch +30 dBm/channel, 2ch +25 dBm/channel
29 dBm composit
Output Power UL
1ch +20 dBm/channel, 2ch +15 dBm/channel
29 dBm composit
Gain adjustment range
55 to 85 dB
55 to 85 dB
Noise Figure
UL 5 dBDL 7 dB
6 dB
Group Delay
6 µs
6 µs
Section
Bottom Section
Door Section
Power Supply
115/230 VAC
115/230 VAC
Power Supply (Optional)
21-60 VDC (optional)
21-60 VDC (optional)
Power Consumption
160 W
200W
Bottom Section
Door Section
Section
Bottom Section
Door Section
RF Connection
N-female (7/16 option)
N-female (7/16 option)
Dimension (WxHxD) mm (ft)
440 x 530 x 280 (1’ 5”x1’9”x11”)
N/A
Weight kg (lbs)
37 (82)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 125 106
TS 45.005
Regulatory Compliance EMC
TS 125 113
EN 301 489-1
ACCR
EVM
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Wireless MOD EM Frequencies
Packet Data Mode
Fallback Circuit Switched Mode
Northbound Traffic
Maintenance
Remote Management
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
Performance is affected by the way Donor and Service antenna is configured (any combination of separate or
combined connection can be ordered). *If combined to common antenna, output power decrease 1dB and NF
increase 1dB
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-08
109
POWERWAVE
AR6522/01109
Channel Selective Standard Repeaters
Standard Repeater DualBand Channel Selective 2100MHz WCDMA,
2Ch / Band Selective 1800MHz GSM Low Band, 16.9MHz
Bandwidth, GSM/GPRS REM CTRL, Combined Donor and Service,
Door Switch
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
WCDMA2100
1920 -1980
GSM 1800 LB
1710-1765
Frequency Band DL (MHz)
2110 - 2170
1805-1860
No. of Channels
2ch
Band Selective
Bandwidth (MHz)
4.4 channel
16.9 MHz
Output Power DL
+24 dBm/channel
28 dBm composite
Output Power UL
+14 dBm/channel
28 dBm composite
Gain adjustment range
55 to 85 dB
55 to 85 dB
Noise Figure
UL 6 dB DL 8 dB
7 dB
Group Delay
6 µs
6 µs
ACCR
-
-
EVM
-
-
Section
Bottom Section
Door Section
Power Supply
115/230 VAC
115/230 VAC
Power Supply (Optional)
NA
NA
Power Consumption
160 W
200W
Door Section
Wireless MOD EM Frequencies
Bottom Section
IP/SNMP: 900/1800 Dual Mode Wireless GPRS
Packet Data Interface
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NWM 3.2.2 and greater; local web interface
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Maintenance
Remote Management
MECHANICAL DATA*
Section
Bottom Section
Door Section
RF Connection
N-female
N-female
Dimension (WxHxD) mm (ft)
440 x 530 x 280 (1’ 5”x1’9”x11”)
N/A
Weight kg (lbs)
37 (82)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 125 106
TS 45.005
Regulatory Compliance EMC
TS 125 113
EN 301 489-1
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
Updated: 2010-12-08
110
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR6522/91100
Channel Selective Standard Repeaters
Dual Band 2100/1800LB Channel Selective/Band Selective
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
WCDMA2100
1920 -1980
GSM 1800 UB
1730-1785
Frequency Band DL (MHz)
2110 - 2170
1825-1880
No. of Channels
1 to 2
Broad band
Bandwidth (MHz)
4.4 channel
16.9 MHz
Output Power DL
1ch +30 dBm/channel, 2ch +25 dBm/channel
29 dBm composit
Output Power UL
1ch +20 dBm/channel, 2ch +15 dBm/channel
29 dBm composit
Gain adjustment range
55 to 85 dB
55 to 85 dB
Noise Figure
UL 5 dBDL 7 dB
6 dB
Group Delay
6 µs
6 µs
Section
Bottom Section
Door Section
Power Supply
115/230 VAC
115/230 VAC
Power Supply (Optional)
21-60 VDC (optional)
21-60 VDC (optional)
Power Consumption
160 W
200W
Bottom Section
Door Section
Section
Bottom Section
Door Section
RF Connection
N-female (7/16 option)
N-female (7/16 option)
Dimension (WxHxD) mm (ft)
440 x 530 x 280 (1’ 5”x1’9”x11”)
N/A
Weight kg (lbs)
37 (82)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 125 106
TS 45.005
Regulatory Compliance EMC
TS 125 113
EN 301 489-1
ACCR
EVM
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Wireless MOD EM Frequencies
Packet Data Mode
Fallback Circuit Switched Mode
Northbound Traffic
Maintenance
Remote Management
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
Performance is affected by the way Donor and Service antenna is configured (any combination of separate or
combined connection can be ordered). *If combined to common antenna, output power decrease 1dB and NF
increase 1dB
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-08
111
POWERWAVE
AR6560/00209
Channel Selective Standard Repeaters
Standard Channel Selective Repeater 2100MHz WCDMA, 2Ch, High
Power, GSM/GPRS REMOTE CONTROL, Door Switch
ELECTRICAL DATA*
Range
WCDMA2100
Frequency Band UL (MHz)
1920 -1980
Frequency Band DL (MHz)
2110 - 2170
No. of Channels
2ch
Bandwidth
Output Power DL (min)
4.4 MHz/channel
Output Power UL (min)
+15 dBm/channel
Gain adjustment range
DL 65 to 95 dB, UL 55 to 85 dB
Noise Figure
DL 6 dB, UL 4 dB
Group Delay
6 µs
+32 dBm/channel
ACCR
EVM
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
NA
320W (2 separate PSU)
REMOTE CONTROL
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195[280] (1’5”x1’9”x8” [11”])
Weight kg (lbs)
48[82]
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
Regulatory Compliance EMC
* All specifications subject to change.
TS 125 106
TS 125 113
Note: Values within [ ] is valid for a max configuration
Updated: 2010-11-09
112
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Band Selective Compact Repeaters
Repeater Products
Title
Compact Repeater
Band Selective, 2100
MHz
Range (MHz)
No. of Channels
Bandwidth (MHz)
Part Number
WCDMA
Band selective
0.5 to 15
ALR0062/00109
116
Compact Band
Selective, 900 MHz
GSM, HSPA+,
LTE
Band selective
0.5 to 25
ALR1200/90209
117
Compact Band
Selective, 900 MHz
GSM, HSPA+,
LTE
Band selective
0.5 to 25
ALR1200/00209
118
Dual Cell Compact
Repeater, 900 MHz
GSM
Broad band
0.5 to 15
ALR1212/00102
119
Dual Cell Compact
Repeater, 900 MHz
GSM, HSPA+,
LTE
Band selective
0.5 to 25
ALR1212/00209
120
Compact Band
Selective, 1800 MHz
GSM, HSPA+,
LTE
Band selective
0.5 to 25
ALR2200/00209
121
Compact Band
Selective, 1800 MHz
GSM, HSPA+,
LTE
Band selective
0.5 to 25
ALR2200/90209
122
Dual Band Compact
Repeater, 1800MHz
GSM, HSPA+,
Band selective
LTE
0.5 to 15
ALR2212/00119
123
Dual Band Compact
Repeater, 1800MHz
GSM, HSPA+,
Band selective
LTE
0.5 to 15
ALR2212/00129
124
Dual Band Compact
Repeater, 1800MHz
GSM, HSPA+,
Band selective
LTE
0.5 to 15
ALR2222/00109
125
Compact Band
Selective, 1900MHz
TDMA
Broad band
0.5 to 15
ALR3200/00
126
Compact Band
Selective, 1900MHz
TDMA
Band selective
0.5 to 15
ALR3200/00109
127
Compact Band
Selective, 1900MHz
CDMA
Band selective
0.5 to 15
ALR3200/01109
128
113
Page
Coverage Products
POWERWAVE
Band Selective Compact Repeaters
Repeater Products
Title
Range (MHz)
No. of Channels
Bandwidth (MHz)
Part Number
Compact Band
Selective, 1900MHz
TDMA
Band selective
0.5 to 15
ALR3200/90109
129
Compact Band
Selective, 1900MHz
CDMA
Broad band
0.5 to 15
ALR3200/91109
130
Compact Dual Band
Repeater, 1900MHz
CDMA
Band selective
0.5 to 15
ALR3232/51109
131
Compact Dual Band
Repeater, 1900MHz
CDMA
Band selective
0.5 to 15
ALR3242/03039
132
Compact Dual Band
Repeater, 1900MHz
CDMA
Band selective
0.5 to 15
ALR3246/00309
133
Compact Dual Band
Repeater, 800MHz
TDMA
Band selective
0.5 to 15/25
ALR4200/00209
134
Compact Dual Band
Repeater, 850MHz
CDMA
Band selective
0.5 to 15
ALR4200/01109
135
Compact Dual Band
Repeater, 850MHz
CDMA
Band selective
0.5 to 25
ALR4200/01209
136
Compact Band
Selective, 850MHz
CDMA
Broad band
0.5 to 25
ALR4600/00109
137
Compact Band
Selective, 850MHz
iDEN
Band selective
0.5 to 15
ALR4600/00119
138
Compact Band
Selective, 800MHz
iDEN
Band selective
0.5 to 18
ALR4600/00209
139
Compact Band
Selective, 2100MHz
WCDMA,
HSPA+, LTE
Band selective
0.5 to 15
ALR6200/00109
140
Compact Dual Band
900/2100
WCDMA
Band selective
0.5 to 15
ALR6212/90129
141
114
Page
Coverage Products
POWERWAVE
Band Selective Compact Repeaters
Repeater Products
Title
Range (MHz)
No. of Channels
Bandwidth (MHz)
Part Number
Dual Band Compact,
900/2100MHz
WCDMA
Broad band
0.5 to 15
ALR6212/90139
142
Compact In-train Band GSM, HSPA+,
Broad band
Selective, 900 MHz
LTE
0.5 to 25
ALT1200/00209
143
115
Page
POWERWAVE
ALR0062/00109
Band Selective Compact Repeaters
UPGRADE COMPACT REPEATER BAND SELECTIVE 2100MHz WCDMA,
BW15MHz, STAND ALONE, SEPARATED DONOR/SERVICE
ELECTRICAL DATA*
Range
WCDMA, HSPA+, LTE
Frequency Band UL (MHz)
1920-1980
Frequency Band DL (MHz)
2110-2170
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 15 MHz
Output Power UL (min)
+20 dBm Composite
Gain adjustment range
55 to 70 dB (Gain ripple in band +/-1 dB)
Noise Figure
DL 5 dB, UL 3 dB
Group Delay
6 µs
ACCR
-51 dB (LTE)
EVM
< 6.7% (LTE)
+24 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
21-60 VDC
60W
REMOTE CONTROL*
Type
NA
Wireless MOD EM Frequencies
NA
Packet Data Mode
NA
Fallback Circuit Switched Mode
NA
Northbound Traffic
NA
Maintenance
Remote Management
NA
NA
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x55 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 125.106
Regulatory Compliance EMC
TS 125.113
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
116
POWERWAVE
ALR1200/90209
Band Selective Compact Repeaters
COMPACT REPEATER BAND SELECTIVE 900MHz EGSM, BW25MHz,
GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA*
Range
GSM, HSPA+, LTE
Frequency Band UL (MHz)
880-905
Frequency Band DL (MHz)
925-950
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 25 MHz
Output Power UL (min)
+22 dBm Composite
Gain adjustment range
55 to 70 dB (Gain ripple in band +/-1 dB)
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-51 dB (LTE)
EVM
< 6.7% (LTE)
+22 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
60W
REMOTE CONTROL*
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x110 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005, TS 25.143, TS 36.143
Regulatory Compliance EMC
EN 301 489-1
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
117
POWERWAVE
ALR1200/00209
Band Selective Compact Repeaters
COMPACT REPEATER BAND SELECTIVE 900MHz GSM, BW25MHz,
GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA*
Range
GSM, HSPA+, LTE
Frequency Band UL (MHz)
890-915
Frequency Band DL (MHz)
935-960
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 25 MHz
Output Power UL (min)
+22 dBm Composite
Gain adjustment range
55 to 70 dB (Gain ripple in band +/-1 dB)
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-51 dB (LTE)
EVM
< 6.7% (LTE)
+22 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
60W
REMOTE CONTROL*
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x110 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005, TS 25.143, TS 36.143
Regulatory Compliance EMC
EN 301 489-1
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
118
POWERWAVE
ALR1212/00102
Band Selective Compact Repeaters
Dual Cell Compact Repeater GSM900, BW 15 MHz / GSM900, BW 15
MH with Wireless and Ethernet Remote Management, Combined
service and donor ports
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
GSM 900
890-915
GSM 900
890-915
Frequency Band DL (MHz)
935-960
935-960
No. of Channels
Broad band
Broad band
Bandwidth (MHz)
0.5 to 15 MHz
0.5 to 15 MHz
Output Power DL
+22 dBm Composite
+22 dBm Composite
Output Power UL
+22 dBm Composit
+22 dBm Composite
Gain adjustment range
55 to 70 dB
55 to 70 dB
Noise Figure
8 dB
8 dB
Group Delay
6 µs
6 µs
Section
Bottom Section
Door Section
Power Supply
85-265 VAC
85-265 VAC
Power Supply (Optional)
21-60 VDC (optional)
21-60 VDC (optional)
Power Consumption
60W
60W
Bottom Section
Door Section
Section
Bottom Section
Door Section
RF Connection
N-female
N-female
Dimension (WxHxD) mm (ft)
385x385x160 (1’3”x1’3”x6”)
N/A
Weight kg (lbs)
18 (40)
8 (18)
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 45.005
TS 45.005
Regulatory Compliance EMC
EN 301 489-1
EN 301 489-1
ACCR
EVM
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Wireless MOD EM Frequencies
Packet Data Mode
Fallback Circuit Switched Mode
Northbound Traffic
Maintenance
Remote Management
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
The combined output power at the service port is 3dB lower than the nominal output power for each repeater
cell.
© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-29
119
POWERWAVE
ALR1212/00209
Band Selective Compact Repeaters
COMPACT REPEATER DUAL CELL 900MHz GSM, 25MHz
BW/900MHz GSM, 25MHz BW, GSM/GPRS REMOTE
CONTROL,COMBINED DONOR AND SERVICE
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
GSM, HSPA+, LTE
890-915
GSM, HSPA+, LTE
890-915
Frequency Band DL (MHz)
935-960
935-960
No. of Channels
Band Selective
Band Selective
Bandwidth (MHz)
0.5 to 25 MHz
0.5 to 25 MHz
Output Power DL
+19 dBm Composite (Combined service ports)
+19 dBm Composite (Combined service ports)
Output Power UL
+19 dBm Composite (Combined donor ports)
+19 dBm Composite (Combined donor ports)
Gain adjustment range
55 to 70 dB
55 to 70 dB
Noise Figure
8 dB
8 dB
Group Delay
6 µs
6 µs
ACCR
-51 dB (LTE)
-51 dB (LTE)
EVM
< 6.7% (LTE)
< 6.7% (LTE)
Section
Bottom Section
Door Section
Power Supply
85-265 VAC
85-265 VAC
Power Supply (Optional)
N/A
N/A
Power Consumption
60W
60W
Door Section
Wireless MOD EM Frequencies
Bottom Section
IP/SNMP: 900/1800 Dual Mode Wireless GPRS
Packet Data Interface
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
N/A
Fallback Circuit Switched Mode
GSM
N/A
Northbound Traffic
SNMP v1, v2c and http
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NWM 3.2.2 and greater; local web interface
N/A
Section
Bottom Section
Door Section
RF Connection
N-female
N/A
Dimension (WxHxD) mm (ft)
385x385x160 (1’3”x1’3”x6”)
N/A
Weight kg (lbs)
18 (40)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 45.005
TS 45.005
Regulatory Compliance EMC
EN 301 489-1
EN 301 489-1
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Maintenance
Remote Management
N/A
N/A
N/A
N/A
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
Updated: 2010-11-09
120
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
ALR2200/00209
Band Selective Compact Repeaters
COMPACT REPEATER BAND SELECTIVE 1800MHz GSM LB, BW25MHz,
GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA*
Range
GSM, HSPA+, LTE
Frequency Band UL (MHz)
1710-1765
Frequency Band DL (MHz)
1805-1860
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 25 MHz
Output Power UL (min)
+23 dBm Composite
Gain adjustment range
55 to 70 dB (Gain ripple in band +/-1 dB)
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-51 dB (LTE)
EVM
< 6.7% (LTE)
+23 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
60W
REMOTE CONTROL*
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195 (1’5”x1’9”x7” )
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005, TS 25.143, TS 36.143
Regulatory Compliance EMC
EN 301 489-1
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
121
POWERWAVE
ALR2200/90209
Band Selective Compact Repeaters
COMPACT REPEATER BAND SELECTIVE 1800MHz GSM UB, BW25MHz,
GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA*
Range
GSM, HSPA+, LTE
Frequency Band UL (MHz)
1730-1785
Frequency Band DL (MHz)
1825-1880
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 25 MHz
Output Power UL (min)
+23 dBm Composite
Gain adjustment range
55 to 70 dB (Gain ripple in band +/-1 dB)
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-51 dB (LTE)
EVM
< 6.7% (LTE)
+23 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
60W
REMOTE CONTROL*
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195 (1’5”x1’9”x7” )
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005, TS 25.143, TS 36.143
Regulatory Compliance EMC
EN 301 489-1
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
122
POWERWAVE
ALR2212/00119
Band Selective Compact Repeaters
COMPACT REPEATER DUAL BAND GSM1800 LB/GSM900MHz,
15/15MHz BW, GSM/GPRS REM CTRL, SEPARATED
DONOR/SERVICE
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
GSM, HSPA+, LTE
1710-1765
GSM, HSPA+, LTE
890-915
Frequency Band DL (MHz)
1805-1860
935-960
No. of Channels
Band Selective
Band Selective
Bandwidth (MHz)
0.5 to 15 MHz
0.5 to 15 MHz
Output Power DL
+23 dBm Composite
+22 dBm Composite
Output Power UL
+23 dBm Composite
+22 dBm Composite
Gain adjustment range
55 to 70 dB
55 to 70 dB
Noise Figure
8 dB
8 dB
Group Delay
6 µs
6 µs
ACCR
-51 dB (LTE)
-51 dB (LTE)
EVM
< 6.7% (LTE)
< 6.7% (LTE)
Section
Bottom Section
Door Section
Power Supply
85-265 VAC
85-265 VAC
Power Supply (Optional)
N/A
N/A
Power Consumption
60W
60W
Door Section
Wireless MOD EM Frequencies
Bottom Section
IP/SNMP: 900/1800 Dual Mode Wireless GPRS
Packet Data Interface
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
N/A
Fallback Circuit Switched Mode
GSM
N/A
Northbound Traffic
SNMP v1, v2c and http
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NWM 3.2.2 and greater; local web interface
N/A
Section
Bottom Section
Door Section
RF Connection
N-female
N/A
Dimension (WxHxD) mm (ft)
385x385x160 (1’3”x1’3”x6”)
N/A
Weight kg (lbs)
18 (40)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 45.005
TS 45.005
Regulatory Compliance EMC
EN 301 489-1
EN 301 489-1
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Maintenance
Remote Management
N/A
N/A
N/A
N/A
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
Updated: 2010-11-09
123
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
ALR2212/00129
Band Selective Compact Repeaters
COMPACT REPEATER DUAL BAND GSM1800 LB/GSM900MHz,
15/15MHz BW, GSM/GPRS REM CTRL, COMBINED
DONOR/SERVICE
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
GSM, HSPA+, LTE
1710-1765
GSM, HSPA+, LTE
890-915
Frequency Band DL (MHz)
1805-1860
935-960
No. of Channels
Band Selective
Band Selective
Bandwidth (MHz)
0.5 to 15 MHz
0.5 to 15 MHz
Output Power DL
+22 dBm Composite
+21 dBm Composite
Output Power UL
+22 dBm Composite
+21 dBm Composite
Gain adjustment range
55 to 70 dB
55 to 70 dB
Noise Figure
8 dB
8 dB
Group Delay
6 µs
6 µs
ACCR
-51 dB (LTE)
-51 dB (LTE)
EVM
< 6.7% (LTE)
< 6.7% (LTE)
Section
Bottom Section
Door Section
Power Supply
85-265 VAC
85-265 VAC
Power Supply (Optional)
N/A
N/A
Power Consumption
60W
60W
Door Section
Wireless MOD EM Frequencies
Bottom Section
IP/SNMP: 900/1800 Dual Mode Wireless GPRS
Packet Data Interface
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
N/A
Fallback Circuit Switched Mode
GSM
N/A
Northbound Traffic
SNMP v1, v2c and http
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NWM 3.2.2 and greater; local web interface
N/A
Section
Bottom Section
Door Section
RF Connection
N-female
N/A
Dimension (WxHxD) mm (ft)
385x385x160 (1’3”x1’3”x6”)
N/A
Weight kg (lbs)
18 (40)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 45.005
TS 45.005
Regulatory Compliance EMC
EN 301 489-1
EN 301 489-1
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Maintenance
Remote Management
N/A
N/A
N/A
N/A
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
Updated: 2010-11-09
124
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
ALR2222/00109
Band Selective Compact Repeaters
Compact Repeater Dual Cell 1800MHz GSM LB, 15MHz
BW/1800MHz GSM LB, 15MHz BW, GSM/GPRS Remote Control,
Combined Donor And Service
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
GSM, HSPA+, LTE
1710-1765
GSM, HSPA+, LTE
1710-1765
Frequency Band DL (MHz)
1805-1860
1805-1860
No. of Channels
Band Selective
Broad band
Bandwidth (MHz)
0.5 to 15 MHz
0.5 to 15 MHz
Output Power DL
+20 dBm Composite (Combined service ports)
+20 dBm Composite (Combined service ports)
Output Power UL
+20 dBm Composite (Combined donor ports)
+20 dBm Composite (Combined donor ports)
Gain adjustment range
55 to 70 dB
55 to 70 dB
Noise Figure
8 dB
8 dB
Group Delay
6 µs
6 µs
ACCR
-51 dB (LTE)
-51 dB (LTE)
EVM
< 6.7% (LTE)
< 6.7% (LTE)
Section
Bottom Section
Door Section
Power Supply
85-265 VAC
85-265 VAC
Power Supply (Optional)
N/A
N/A
Power Consumption
60W
60W
Door Section
Wireless MOD EM Frequencies
Bottom Section
IP/SNMP: 900/1800 Dual Mode Wireless GPRS
Packet Data Interface
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
N/A
Fallback Circuit Switched Mode
GSM
N/A
Northbound Traffic
SNMP v1, v2c and http
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NWV 3.2.2 and greater; local web interface
N/A
Section
Bottom Section
Door Section
RF Connection
N-female
N/A
Dimension (WxHxD) mm (ft)
385x385x160 (1’3”x1’3”x6”)
N/A
Weight kg (lbs)
18 (40)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 45.005
TS 45.005
Regulatory Compliance EMC
EN 301 489-1
EN 301 489-1
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Maintenance
Remote Management
N/A
N/A
N/A
N/A
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
The combined output power at donor and service port is 3dB lower than the nominal output power for each
repeater cell.
Updated: 2010-11-29
125
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
ALR3200/00
Band Selective Compact Repeaters
Compact Band Selective, 1900 MHz
ELECTRICAL DATA*
Range
TDMA
Frequency Band UL (MHz)
1850-1890
Frequency Band DL (MHz)
1930-1970
No. of Channels
Broad band
Bandwidth
Output Power DL (min)
0.5 to 15 MHz
Output Power UL (min)
+25 dBm Composit
Gain adjustment range
55 to 70 dB
Noise Figure
8 dB
Group Delay
6 µs
+25 dBm Composit
ACCR
EVM
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
21-60 VDC (optional)
60W
REMOTE CONTROL*
Type
Wireless MOD EM Frequencies
Packet Data Mode
Fallback Circuit Switched Mode
Northbound Traffic
Maintenance
Remote Management
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x110 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Rule 24
Regulatory Compliance EMC
FCC Rule 24
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-01-07
126
POWERWAVE
ALR3200/00109
Band Selective Compact Repeaters
COMPACT REPEATER BAND SELECTIVE 1900MHz GSM LB, BW15MHz,
WIRELINE REMOTE CONTROL
ELECTRICAL DATA*
Range
TDMA
Frequency Band UL (MHz)
1850-1890
Frequency Band DL (MHz)
1930-1970
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 15 MHz
Output Power UL (min)
+25 dBm Composite
Gain adjustment range
55 to 70 dB
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-
EVM
-
+25 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
60W
REMOTE CONTROL*
Type
PSTN Unit
Wireless MOD EM Frequencies
NA
Packet Data Mode
NA
Fallback Circuit Switched Mode
NA
Northbound Traffic
NA
Maintenance
Remote Management
NA
NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x110 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Rule 24
Regulatory Compliance EMC
FCC Rule 24
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
127
POWERWAVE
ALR3200/01109
Band Selective Compact Repeaters
COMPACT REPEATER BAND SELECTIVE 1900MHz CDMA LB, BW15MHz,
WIRELINE REMOTE CONTROL
ELECTRICAL DATA*
Range
CDMA
Frequency Band UL (MHz)
1850-1890
Frequency Band DL (MHz)
1930-1970
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 15 MHz
Output Power UL (min)
+23 dBm Composite
Gain adjustment range
55 to 70 dB
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-
EVM
-
+26 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
60W
REMOTE CONTROL*
Type
PSTN Unit
Wireless MOD EM Frequencies
-
Packet Data Mode
-
Fallback Circuit Switched Mode
-
Northbound Traffic
-
Maintenance
Remote Management
NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x110 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Rule 24
Regulatory Compliance EMC
FCC Rule 24
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
128
POWERWAVE
ALR3200/90109
Band Selective Compact Repeaters
COMPACT REPEATER BAND SELECTIVE 1900MHz GSM UB, BW15MHz,
WIRELINE REMOTE CONTROL
ELECTRICAL DATA*
Range
TDMA
Frequency Band UL (MHz)
1870-1910
Frequency Band DL (MHz)
1950-1990
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 15 MHz
Output Power UL (min)
+25 dBm Composite
Gain adjustment range
55 to 70 dB
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-
EVM
-
+25 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
60W
REMOTE CONTROL*
Type
PSTN Unit
Wireless MOD EM Frequencies
-
Packet Data Mode
-
Fallback Circuit Switched Mode
-
Northbound Traffic
-
Maintenance
Remote Management
NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x110 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Rule 24
Regulatory Compliance EMC
FCC Rule 24
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
129
POWERWAVE
ALR3200/91109
Band Selective Compact Repeaters
COMPACT REPEATER BAND SELECTIVE 1900MHz CDMA UB,
BW15MHz, WIRELINE REMOTE CONTROL
ELECTRICAL DATA*
Range
CDMA
Frequency Band UL (MHz)
1870-1910
Frequency Band DL (MHz)
1950-1990
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 15 MHz
Output Power UL (min)
+23 dBm Composite
Gain adjustment range
55 to 70 dB
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-
EVM
-
+26 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
60W
REMOTE CONTROL*
Type
PSTN Unit
Wireless MOD EM Frequencies
-
Packet Data Mode
-
Fallback Circuit Switched Mode
-
Northbound Traffic
-
Maintenance
Remote Management
NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x110 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Rule 24
Regulatory Compliance EMC
FCC Rule 24
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
130
POWERWAVE
ALR3232/51109
Band Selective Compact Repeaters
COMPACT REPEATER DUAL CELL 1900MHz CDMA LB, 15MHz
BW/1900MHz CDMA UB, 15MHz BW, COMBINED DONOR/SERVICE
ELECTRICAL DATA*
Range
CDMA
Frequency Band UL (MHz)
1870-1910 (UB)/ 1850-1890 (LB)
Frequency Band DL (MHz)
1950-1990 (UB)/ 1930-1970 (LB)
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 15 MHz
Output Power UL (min)
+23 dBm Composite (UB and LB combined ports)
Gain adjustment range
55 to 70 dB
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-
EVM
-
+23 dBm Composite (UB and LB combined ports)
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
120W
REMOTE CONTROL*
Type
NA
Wireless MOD EM Frequencies
-
Packet Data Mode
-
Fallback Circuit Switched Mode
-
Northbound Traffic
-
Maintenance
Remote Management
NA
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x160 (1’3”x1’3”x6”)
Weight kg (lbs)
18 (40)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Rule 24
Regulatory Compliance EMC
FCC Rule 24
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
131
POWERWAVE
ALR3242/03039
Band Selective Compact Repeaters
COMPACT REPEATER DUAL BAND CDMA 1900 MHz LB/CDMA
800MHz, 15/15MHz BW, SEPARATED DONOR/SERVICE
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
CDMA 1900
1850-1890
CDMA 800
824-849
Frequency Band DL (MHz)
1930-1970
869-894
No. of Channels
Band Selective
Band Selective
Bandwidth (MHz)
0.5 to 15 MHz
0.5 to 15 MHz
Output Power DL
+26 dBm Composite
+26 dBm Composite
Output Power UL
+26 dBm Composite
+23 dBm Composite
Gain adjustment range
55 to 70 dB
55 to 70 dB
Noise Figure
8 dB
8 dB
Group Delay
6 µs
6 µs
ACCR
-
-
EVM
-
-
Section
Bottom Section
Door Section
Power Supply
85-265 VAC
115/230 VAC
Power Supply (Optional)
NA
NA
Power Consumption
60W
60 W
Section
Bottom Section
Door Section
Type
NA
NA
Wireless MOD EM Frequencies
NA
NA
Packet Data Mode
NA
NA
Fallback Circuit Switched Mode
NA
NA
Northbound Traffic
NA
NA
Maintenance
NA
NA
Remote Management
NA
NA
Section
Bottom Section
Door Section
RF Connection
N-female
N-female (7/16 option)
Dimension (WxHxD) mm (ft)
385x385x160 (1’3”x1’3”x6”)
N/A
Weight kg (lbs)
18 (40)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
FCC Rule 24
FCC Rule 22
Regulatory Compliance EMC
FCC Rule 24
FCC Rule 22
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
132
POWERWAVE
ALR3246/00309
Band Selective Compact Repeaters
COMPACT REPEATER DUAL BAND GSM 1900 MHz LB/iDEN 800
MHz, 15/15MHz BW, SEPARATED DONOR/COMBINED SERVICE
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
GSM 1900
1850-1890
iDEN
806-824
Frequency Band DL (MHz)
1930-1970
851-869
No. of Channels
Band Selective
Band Selective
Bandwidth (MHz)
0.5 to 15 MHZ
0.5 to 15 MHz
Output Power DL
+24 dBm Composite
+24 dBm Composite
Output Power UL
+25 dBm Composite
+25 dBm Composite
Gain adjustment range
55 to 70 dB
55 to 70 dB
Noise Figure
9 dB
9 dB
Group Delay
6 µs
6 µs
ACCR
-
-
EVM
-
-
Section
Bottom Section
Door Section
Power Supply
85-265 VAC
115/230 VAC
Power Supply (Optional)
NA
NA
Power Consumption
60W
60 W
Section
Bottom Section
Door Section
Type
NA
NA
Wireless MOD EM Frequencies
NA
NA
Packet Data Mode
NA
NA
Fallback Circuit Switched Mode
NA
NA
Northbound Traffic
NA
NA
Maintenance
NA
NA
Remote Management
NA
NA
Section
Bottom Section
Door Section
RF Connection
N-female
N-female (7/16 option)
Dimension (WxHxD) mm (ft)
385x385x160 (1’3”x1’3”x6”)
N/A
Weight kg (lbs)
18 (40)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
FCC Rule 24
FCC Rule 90
Regulatory Compliance EMC
FCC Rule 24
FCC Rule 90
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
133
POWERWAVE
ALR4200/00209
Band Selective Compact Repeaters
COMPACT REPEATER BAND SELECTIVE 850MHz AMPS, BW25MHz,
WIRELINE REMOTE CONTROL
ELECTRICAL DATA*
Range
TDMA
Frequency Band UL (MHz)
824-849
Frequency Band DL (MHz)
869-894
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 25 MHz
Output Power UL (min)
+25 dBm Composite
Gain adjustment range
55 to 70 dB
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-
EVM
-
+25 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
60W
REMOTE CONTROL*
Type
PSTN Unit
Wireless MOD EM Frequencies
NA
Packet Data Mode
NA
Fallback Circuit Switched Mode
NA
Northbound Traffic
NA
Maintenance
Remote Management
NA
NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x110 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Rule 22
Regulatory Compliance EMC
FCC Rule 22
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
134
POWERWAVE
ALR4200/01109
Band Selective Compact Repeaters
COMPACT REPEATER BAND SELECTIVE 850MHz CDMA, BW15MHz,
WIRELINE REMOTE CONTROL
ELECTRICAL DATA*
Range
CDMA
Frequency Band UL (MHz)
824-849
Frequency Band DL (MHz)
869-894
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 15 MHz
Output Power UL (min)
+23 dBm Composite
Gain adjustment range
55 to 70 dB
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-
EVM
-
+26 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
60W
REMOTE CONTROL*
Type
PSTN Unit
Wireless MOD EM Frequencies
NA
Packet Data Mode
NA
Fallback Circuit Switched Mode
NA
Northbound Traffic
NA
Maintenance
Remote Management
NA
NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x110 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Rule 22
Regulatory Compliance EMC
FCC Rule 22
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
135
POWERWAVE
ALR4200/01209
Band Selective Compact Repeaters
COMPACT REPEATER BAND SELECTIVE 850MHz CDMA, BW25MHz,
WIRELINE REMOTE CONTROL
ELECTRICAL DATA*
Range
CDMA
Frequency Band UL (MHz)
824-849
Frequency Band DL (MHz)
869-894
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 25 MHz
Output Power UL (min)
+23 dBm Composite
Gain adjustment range
55 to 70 dB
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-
EVM
-
+26 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
60W
REMOTE CONTROL*
Type
PSTN Unit
Wireless MOD EM Frequencies
NA
Packet Data Mode
NA
Fallback Circuit Switched Mode
NA
Northbound Traffic
NA
Maintenance
Remote Management
NA
NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x110 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Rule 22
Regulatory Compliance EMC
FCC Rule 22
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
136
POWERWAVE
ALR4600/00109
Band Selective Compact Repeaters
COMPACT REPEATER BAND SELECTIVE 800 iPS, BW15MHz, WIRELINE
REMOTE CONTROL
ELECTRICAL DATA*
Range
iDEN
Frequency Band UL (MHz)
806-824
Frequency Band DL (MHz)
851-869
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 15MHz
Output Power UL (min)
+25 dBm Composite
Gain adjustment range
55 to 70 dB
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-
EVM
-
+25 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
60W
REMOTE CONTROL*
Type
PSTN Unit
Wireless MOD EM Frequencies
NA
Packet Data Mode
NA
Fallback Circuit Switched Mode
NA
Northbound Traffic
NA
Maintenance
Remote Management
NA
NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x110 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Rule 90
Regulatory Compliance EMC
FCC Rule 90
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
137
POWERWAVE
ALR4600/00119
Band Selective Compact Repeaters
COMPACT REPEATER BAND SELECTIVE 800 iPS, BW15MHz, 850/1900
MHz GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA*
Range
iDEN
Frequency Band UL (MHz)
806-824
Frequency Band DL (MHz)
851-869
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 15MHz
Output Power UL (min)
+25 dBm Composite
Gain adjustment range
55 to 70 dB
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-
EVM
-
+25 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
60W
REMOTE CONTROL*
Type
IP/SNMP 850/1900 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
850 / 1900 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x110 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Rule 90
Regulatory Compliance EMC
FCC Rule 90
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
138
POWERWAVE
ALR4600/00209
Band Selective Compact Repeaters
COMPACT REPEATER BAND SELECTIVE 800 iPS, BW18MHz
ELECTRICAL DATA*
Range
iDEN
Frequency Band UL (MHz)
806-824
Frequency Band DL (MHz)
851-869
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 18MHz
Output Power UL (min)
+25 dBm Composite
Gain adjustment range
55 to 70 dB
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-
EVM
-
+25 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
60W
REMOTE CONTROL*
Type
NA
Wireless MOD EM Frequencies
NA
Packet Data Mode
NA
Fallback Circuit Switched Mode
NA
Northbound Traffic
NA
Maintenance
Remote Management
NA
NA
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x110 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Rule 90
Regulatory Compliance EMC
FCC Rule 90
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
139
POWERWAVE
ALR6200/00109
Band Selective Compact Repeaters
COMPACT REPEATER BAND SELECTIVE 2100MHz WCDMA, BW15MHz,
GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA*
Range
WCDMA, HSPA+, LTE
Frequency Band UL (MHz)
1920-1980
Frequency Band DL (MHz)
2110-2170
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 15 MHz
Output Power UL (min)
+20 dBm Composite
Gain adjustment range
55 to 70 dB (Gain ripple in band +/-1 dB)
Noise Figure
DL 5 dB, UL 3 dB
Group Delay
6 µs
ACCR
-51 dB (LTE)
EVM
< 6.7% (LTE)
+24 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
85-265 VAC
Power Supply (Optional)
Power Consumption
NA
60W
REMOTE CONTROL*
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x110 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 125.106
Regulatory Compliance EMC
TS 125.113
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
140
POWERWAVE
ALR6212/90129
Band Selective Compact Repeaters
COMPACT REPEATER DUAL BAND WCDMA/EGSM, 2100/900MHz,
15/25MHz BW, GSM/GPRS REM CTRL,COMBINED DONOR AND
SERVICE
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
WCDMA 2100
1920 -1980
EGSM 900
880-915
Frequency Band DL (MHz)
2110 - 2170
925-960
No. of Channels
Band Selective
Band Selective
Bandwidth (MHz)
0.5 to 15
0.5 to 25 MHz
Output Power DL
+23 dBm Composite
+21 dBm Composite
Output Power UL
+19 dBm Composite
+21 dBm Composite
Gain adjustment range
55 to 70 dB
55 to 70 dB
Noise Figure
DL 5 dBUL 3 dB
8 dB
Group Delay
6 µs
6 µs
ACCR
-51dB (LTE)
-
EVM
< 6.7% (LTE)
-
Section
Bottom Section
Door Section
Power Supply
85-265 VAC
85-265 VAC
Power Supply (Optional)
NA
NA
Power Consumption
60W
60W
Door Section
Wireless MOD EM Frequencies
Bottom Section
IP/SNMP: 900/1800 Dual Mode Wireless GPRS
Packet Data Interface
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
NA
Fallback Circuit Switched Mode
GSM
NA
Northbound Traffic
SNMP v1, v2c and http
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NWM 3.2.2 and greater; local web interface
NA
Section
Bottom Section
Door Section
RF Connection
N-female
N-female
Dimension (WxHxD) mm (ft)
385x385x160 (1’3”x1’3”x6”)
N/A
Weight kg (lbs)
18 (40)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 125 106
TS 45.005
Regulatory Compliance EMC
TS 125 113
EN 301 489-1
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Maintenance
Remote Management
NA
NA
NA
NA
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
Updated: 2010-11-09
141
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
ALR6212/90139
Band Selective Compact Repeaters
COMPACT REPEATER DUAL BAND
WCDMA/EGSM,2100/900MHz,15/25MHz BW,AC PSU,GSM/GPRS
REM CTRL,SEPARATE DONOR/COMBINED SERVICE
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
WCDMA 2100
1920 -1980
EGSM 900
880-915
Frequency Band DL (MHz)
2110 - 2170
925-960
No. of Channels
Broad band
Band Selective
Bandwidth (MHz)
0.5 to 15
0.5 to 25 MHz
Output Power DL
+23 dBm Composite
+21 dBm Composite
Output Power UL
+20 dBm Composite
+22 dBm Composite
Gain adjustment range
55 to 70 dB
55 to 70 dB
Noise Figure
DL 5 dBUL 3 dB
8 dB
Group Delay
6 µs
6 µs
ACCR
-51dB (LTE)
-
EVM
< 6.7% (LTE)
-
Section
Bottom Section
Door Section
Power Supply
85-265 VAC
85-265 VAC
Power Supply (Optional)
NA
N/A
Power Consumption
60W
60W
Door Section
Wireless MOD EM Frequencies
Bottom Section
IP/SNMP: 900/1800 Dual Mode Wireless GPRS
Packet Data Interface
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
N/A
Fallback Circuit Switched Mode
GSM
N/A
Northbound Traffic
SNMP v1, v2c and http
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NWM 3.2.2 and greater; local web interface
N/A
Section
Bottom Section
Door Section
RF Connection
N-female
N-female
Dimension (WxHxD) mm (ft)
385x385x160 (1’3”x1’3”x6”)
N/A
Weight kg (lbs)
18 (40)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 125 106
TS 45.005
Regulatory Compliance EMC
TS 125 113
EN 301 489-1
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Maintenance
Remote Management
NA
NA
N/A
N/A
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
Updated: 2010-11-09
142
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
ALT1200/00209
Band Selective Compact Repeaters
COMPACT IN-TRAIN REPEATER BAND SELECTIVE 900MHz GSM,
BW25MHz, GSM/GPRS REMOTE CONTROL
ELECTRICAL DATA*
Range
GSM, HSPA+, LTE
Frequency Band UL (MHz)
890-915
Frequency Band DL (MHz)
935-960
No. of Channels
Broad band
Bandwidth
Output Power DL (min)
0.5 to 25 MHz
Output Power UL (min)
+22 dBm Composite
Gain adjustment range
55 to 70 dB (Gain ripple in band +/-1 dB)
Noise Figure
8 dB
Group Delay
6 µs
ACCR
-51 dB (LTE)
EVM
< 6.7% (LTE)
+22 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
21-60 VDC
Power Supply (Optional)
Power Consumption
N/A
60W
REMOTE CONTROL*
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
385x385x110 (1’3”x1’3”x4”)
Weight kg (lbs)
10 (22)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005
Regulatory Compliance EMC
EN 301 489-1
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-11-09
143
Coverage Products
POWERWAVE
Band Selective Standard Repeaters
Repeater Products
Title
Range (MHz)
No. of Channels
Bandwidth (MHz)
Part Number
Page
Mini Repeater,
2100MHz
WCDMA
Broad band
0.5 to 15
ALS6200/00
145
Maritime Standard
Band Selective,
900MHz
GSM
Band selective
0.5 to 25
AM1200/05309
146
Standard Band
Selective, 900MHz
GSM, HSPA+
Broad band
0.5 to 25
AR1200/05309
147
Standard Band
Selective, 900MHz
GSM, HSPA+
Broad band
0.5 to 16.9
AR1200/95209
148
Standard Band
Selective, 1800MHz
GSM
Band selective
0.5 to 16.9
AR2200/00109
149
Standard Dual Band
Selective, 1800MHz
GSM
Band selective
0.5 to 16.9
AR2212/05209
150
Standard Band
Selective, 1900MHz
CDMA
Band selective
0.5 to 16.9
AR3400/01109
151
Standard Band
Selective, 1900MHz
CDMA
Band selective
0.5 to 16.9
AR3400/91109
152
Standard Band
Selective, 1900MHz
CDMA
Band selective
0.5 to 16.9
AR3434/51109
153
Standard Band
Selective, 850MHz
CDMA
Band selective
0.5 to 16.9
AR4200/01209
154
Standard Band
Selective, 800MHz
SMR/iDEN
Broad band
0.5 to 18
AR4600/05309
155
Standard Band
Selective, 800MHz
SMR/iDEN
Broad band
0.5 to 18
AR4640/05309
156
144
POWERWAVE
ALS6200/00
Band Selective Standard Repeaters
Mini Repeater, 2100 MHz
ELECTRICAL DATA*
Range
WCDMA
Frequency Band UL (MHz)
1920 -1980
Frequency Band DL (MHz)
2110 - 2170
No. of Channels
Broad band
Bandwidth
Output Power DL (min)
0.5 to 15 MHz
Output Power UL (min)
+18 dBm Composit
Gain adjustment range
55 to 70 dB
Noise Figure
DL 6 dBUL 4 dB
Group Delay
6 µs
+18 dBm Composit
TECHNICAL SPECIFICATIONS*
Power Supply
100-240 VAC
Power Supply (Optional)
Power Consumption
N/A
42W
MECHANICAL DATA*
RF Connection
SMA-female
Dimension (WxHxD) mm (ft)
270x365x70 (11”x1’3”x4”)
Weight kg (lbs)
5 (11)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
0 to +104 ° (0 to +40 °)
N/A
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 125 106
Regulatory Compliance EMC
TS 125 113
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
Updated: 2010-11-02
145
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AM1200/05309
Band Selective Standard Repeaters
STANDARD BAND SELECTIVE MARITIME REPEATER 900MHz GSM,
BW25MHz, GSM/GPRS/GPS REMOTE CONTROL, Door Switch
ELECTRICAL DATA*
Range
GSM
Frequency Band UL (MHz)
890-915
Frequency Band DL (MHz)
935-960
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 25 MHz
Output Power UL (min)
+26 dBm Composit
Gain adjustment range
55 to 85 dB (Gain trail dynamic range: 30dB and gain trail tracking accuracy: 2dB)
Noise Figure
6 dB
Group Delay
6 µs
ACCR
-
EVM
-
+26 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
N/A
200 W
REMOTE CONTROL
Type
IP/SNMP/GPS: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female (7/16 option)
Dimension (WxHxD) mm (ft)
440x530x195 (1’5”x1’9”x8”)
Weight kg (lbs)
22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
Regulatory Compliance EMC
* All specifications subject to change.
TS 45.005
EN 301 489-1
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-06
146
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR1200/05309
Band Selective Standard Repeaters
STANDARD BAND SELECTIVE REPEATER 900MHz GSM, BW25MHz,
GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range
GSM, HSPA+
Frequency Band UL (MHz)
890-915
Frequency Band DL (MHz)
935-960
No. of Channels
Broad band
Bandwidth
Output Power DL (min)
0.5 to 25 MHz
Output Power UL (min)
+26 dBm Composite
Gain adjustment range
55 to 85 dB / Gain ripple in band +/-2 dB
Noise Figure
6 dB
Group Delay
6 µs
ACCR
43 dB (HSPA+)
EVM
< 6% (HSPA+)
+26 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
N/A
200 W
REMOTE CONTROL
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195 (1’5”x1’9”x8”)
Weight kg (lbs)
22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
Regulatory Compliance EMC
* All specifications subject to change.
TS 45.005
EN 301 489-1
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-06
147
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR1200/95209
Band Selective Standard Repeaters
STANDARD BAND SELECTIVE REPEATER 900MHz
EGSM,BW16.9MHz,AC PSU,N CON,GSM/GPRS REMOTE
CONTROL,DOOR SW,LOCK-KEYS
ELECTRICAL DATA*
Range
GSM, HSPA+
Frequency Band UL (MHz)
880-915
Frequency Band DL (MHz)
925-960
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 16.9 MHz
Output Power UL (min)
+26 dBm Composite
Gain adjustment range
55 to 85 dB / Gain ripple in band +/-2 dB
Noise Figure
6 dB
Group Delay
6 µs
ACCR
43 dB (HSPA+)
EVM
< 6% (HSPA+)
+26 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
N/A
200 W
REMOTE CONTROL
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195 (1’5”x1’9”x8”)
Weight kg (lbs)
22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
TS 45.005
Regulatory Compliance EMC
EN 301 489-1
* All specifications subject to change.
Updated: 2010-12-06
Note: Values within [ ] is valid for a max configuration
148
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR2200/00109
Band Selective Standard Repeaters
STANDARD BAND SELECTIVE REPEPEATER 1800MHz GSM LB,
BW16.9MHz, GSM/GPRS REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range
GSM
Frequency Band UL (MHz)
1710 - 1765
Frequency Band DL (MHz)
1805 - 1860
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 16.9 MHz
Output Power UL (min)
+29 dBm Composite
Gain adjustment range
55 to 85 dB
Noise Figure
6 dB
Group Delay
6 µs
ACCR
-
EVM
-
+29 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
N/A
200W
REMOTE CONTROL
Type
IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface
Wireless MOD EM Frequencies
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Maintenance
Remote Management
10/100 BaseT Ethernet Port (DHCP managed) and RS232
NWM 3.2.2 and greater; local web interface
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195 (1’5”x1’9”x7” )
Weight kg (lbs)
22 [48]
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
Regulatory Compliance EMC
* All specifications subject to change.
TS 45.005
EN 301 489-1
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-06
149
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR2212/05209
Band Selective Standard Repeaters
STANDARD BAND SELECTIVE REPEATER DUAL BAND 1800MHz
LB, BW16.9MHz/900MHz GSM, 16.9MHz BW, GSM/GPRS REMOTE
CONTROL,COMBINED DONOR AND SERVICE, DOOR SWITCH
ELECTRICAL DATA*
Section
Bottom Section
Door Section
Range
Frequency Band UL (MHz)
GSM 1800
1710 - 1765
GSM 900
890-915
Frequency Band DL (MHz)
1805 - 1860
935-960
No. of Channels
Band Selective
Band Selective
Bandwidth (MHz)
0.5 to 16.9
0.5 to 16.9 MHz
Output Power DL
+28 dBm Composite
+25 dBm Composite
Output Power UL
+28 dBm Composite
+25 dBm Composite
Gain adjustment range
55 to 85 dB
55 to 85 dB
Noise Figure
6 dB
6 dB
Group Delay
6 µs
6 µs
ACCR
-
-
EVM
-
-
Section
Bottom Section
Door Section
Power Supply
115/230 VAC
115/230 VAC
Power Supply (Optional)
N/A
N/A
Power Consumption
200 W
200 W
Door Section
Wireless MOD EM Frequencies
Bottom Section
IP/SNMP: 900/1800 Dual Mode Wireless GPRS
Packet Data Interface
900 / 1800 MHz
Packet Data Mode
GPRS and IP Ethernet
N/A
Fallback Circuit Switched Mode
GSM
N/A
Northbound Traffic
SNMP v1, v2c and http
10/100 BaseT Ethernet Port (DHCP managed) and
RS232
NWM 3.2.2 and greater; local web interface
N/A
Section
Bottom Section
Door Section
RF Connection
N-female
N-female
Dimension (WxHxD) mm (ft)
440 x 530 x 280 (1’ 5”x1’9”x11”)
N/A
Weight kg (lbs)
37 (82)
N/A
Section
Bottom Section
Door Section
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 (-25 to +55)
-13 to +131 (-25 to +55)
NEMA 4 / IP65
NEMA 4 / IP65
Section
Bottom Section
Door Section
Regulatory Compliance Radio
TS 45.005
TS 45.005
Regulatory Compliance EMC
EN 301 489-1
EN 301 489-1
TECHNICAL SPECIFICATIONS*
REMOTE CONTROL*
Section
Type
Maintenance
Remote Management
N/A
N/A
N/A
N/A
MECHANICAL DATA*
ENVIRONMENTAL DATA*
APPROVALS AND TESTS*
* All specifications subject to change.
Notes:
Performance is affected by the way Donor and Service antenna is configured. *If combined to common
antenna, output power decrease 1dB and NF increase 1dB
Updated: 2010-12-06
150
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR3400/01109
Band Selective Standard Repeaters
STANDARD BAND SELECTIVE REPEATER 1900MHz CDMA LB,
BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range
CDMA
Frequency Band UL (MHz)
1850-1890
Frequency Band DL (MHz)
1930-1970
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 16.9 MHz
Output Power UL (min)
+33 dBm Composite
Gain adjustment range
55 to 85 dB
Noise Figure
6 dB
Group Delay
6 µs
+33 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
NA
200 W
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195(1’5”x1’9”x8”)
Weight kg (lbs)
22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Part 24
Regulatory Compliance EMC
FCC Part 24
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-06
151
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR3400/91109
Band Selective Standard Repeaters
STANDARD BAND SELECTIVE REPEATER 1900MHz CDMA UB,
BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range
CDMA
Frequency Band UL (MHz)
1870-1910
Frequency Band DL (MHz)
1950-1990
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 16.9 MHz
Output Power UL (min)
+33 dBm Composite
Gain adjustment range
55 to 85 dB
Noise Figure
6 dB
Group Delay
6 µs
+33 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
NA
200 W
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195 (1’5”x1’9”x8”)
Weight kg (lbs)
22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Part 24
Regulatory Compliance EMC
FCC Part 24
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-06
152
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR3434/51109
Band Selective Standard Repeaters
STANDARD BAND SELECTIVE REPEATER DUAL CELL 1900MHz CDMA
UB,BW16.9MHz/1900MHz CDMA LB,BW16.9MHz, WIRELINE REMOTE
CONTROL, DOOR SWITCH
ELECTRICAL DATA*
Range
CDMA
Frequency Band UL (MHz)
1870-1910 (UB) / 1850-1890 (LB)
Frequency Band DL (MHz)
1950-1990 (UB) / 1930-1970 (LB)
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 16.9 MHz (UB and LB)
Output Power UL (min)
+30 dBm Composite (combined UB and LB ports)
Gain adjustment range
55 to 85 dB
Noise Figure
6 dB
Group Delay
6 µs
+30 dBm Composite (combined UB and LB ports)
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
NA
400W (2 Separate PSU’s)
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x280 (1’5”x1’9”x11”)
Weight kg (lbs)
48[82]
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
Regulatory Compliance EMC
* All specifications subject to change.
FCC Part 24
FCC Part 24
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-06
153
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR4200/01209
Band Selective Standard Repeaters
STANDARD BAND SELECTIVE REPEATER 850MHz CDMA, BW16.9MHz,
WIRELINE REMOTE CONTROL, DOOR SW
ELECTRICAL DATA*
Range
CDMA
Frequency Band UL (MHz)
824-849
Frequency Band DL (MHz)
869-894
No. of Channels
Band Selective
Bandwidth
Output Power DL (min)
0.5 to 16.9 MHz
Output Power UL (min)
+30 dBm Composite
Gain adjustment range
55 to 85 dB
Noise Figure
6 dB
Group Delay
6 µs
+33 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
NA
200 W
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195 (1’5”x1’9”x8”)
Weight kg (lbs)
22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Part 22
Regulatory Compliance EMC
FCC Part 22
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-06
154
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR4600/05309
Band Selective Standard Repeaters
STANDARD BAND SELECTIVE REP 800MHz SMR/iDEN, BW18MHz,
WIRELINE REMOTE CONTROL, DOOR SW
ELECTRICAL DATA*
Range
SMR/iDEN
Frequency Band UL (MHz)
806-824
Frequency Band DL (MHz)
851-869
No. of Channels
Broad band
Bandwidth
Output Power DL (min)
0.5 to 18 MHz
Output Power UL (min)
+33 dBm Composite
Gain adjustment range
55 to 85 dB
Noise Figure
6 dB
Group Delay
6 µs
+33 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
NA
200 W
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x195 (1’5”x1’9”x8”)
Weight kg (lbs)
22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Part 90
Regulatory Compliance EMC
FCC Part 90
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-06
155
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
AR4640/05309
Band Selective Standard Repeaters
STANDARD BAND SELECTIVE REP 800MHz SMR/iDEN, HIGH POWER,
BW18MHz, WIRELINE REMOTE CONTROL, DOOR SW
ELECTRICAL DATA*
Range
SMR/iDEN
Frequency Band UL (MHz)
806-824
Frequency Band DL (MHz)
851-869
No. of Channels
Broad band
Bandwidth
Output Power DL (min)
0.5 to 18 MHz
Output Power UL (min)
+33 dBm Composite
Gain adjustment range
65 to 95 dB
Noise Figure
6 dB
Group Delay
6 µs
+36 dBm Composite
TECHNICAL SPECIFICATIONS*
Power Supply
115/230 VAC
Power Supply (Optional)
Power Consumption
NA
320 W
MECHANICAL DATA*
RF Connection
N-female
Dimension (WxHxD) mm (ft)
440x530x280 (1’5”x1’9”x11”)
Weight kg (lbs)
22 (48)
ENVIRONMENTAL DATA*
Operating Temperature Farenheit (Celsius)
Housing Specification
-13 to +131 ° (-25 to +55 °)
NEMA 4 / IP65
APPROVALS AND TESTS*
Regulatory Compliance Radio
FCC Part 90
Regulatory Compliance EMC
FCC Part 90
* All specifications subject to change.
Note: Values within [ ] is valid for a max configuration
Updated: 2010-12-06
156
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Advanced Train Repeaters
Repeater Products
Frequency Range
Up-Link (MHz)
Frequency Range
Down-Link (MHz)
Advanced Train Repeater
Module 900 MHz (GSM
and UMTS)
890-915
935-960
ATR1200/001xy
(GSM 900)
158
Advanced Train Repeater
Module 900 MHz (GSM
and UMTS)
890-915
935-960
ATR1200/002xy
(GSM 900)
159
Advanced Train Repeater
Module 900 MHz (EGSM
and UMTS)
880-905
925-950
ATR1200/901xy
(EGSM 900)
160
Advanced Train Repeater
Module 900 MHz (GSM
and UMTS)
880-905
925-950
ATR1200/902xy
(EGSM 900)
161
Title
157
Part Number
Page
Advanced Train Repeaters
POWERWAVE
ATR1200/001xy (GSM 900)
Advanced Train Repeater Module 900 MHz (GSM and
UMTS)
Advanced Train Repeater Module 900MHz (GSM/UMTS), bandwidth 15MHz
ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz)
890-915
Frequency Range Downlink (MHz)
935-960
Filter Bandwidth Adjustable (MHz)
0,5-15
Filter Settling Resolutions (KHz)
25
Gain Range
50-70 dB
Gain Step Resolution
1 dB
Gain Trail Dynamic Range
30 dB
Gain Trail Tracking Accuracy
2 dB
Output Power Composite (min)
+23 dBm (UL), +18 dBm (DL)
Noise Figure 70 dB Gain
8 dB
Maximum Input Power
+13 dBm
Power Supply
110 - 240 VAC, 110 DC or -24 to -48 VDC
Power Consumption
< 50 W
MECHANICAL SPECIFICATIONS
Dimensions WxDxH mm (in)
450 x 420 x 44 (17.7x 16.5 x 1.7)
Weight kg (lbs)
< 3 (6.6)
RF Connectors
SMA-Type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25°C to +45 °C
Humidity
EC 60068-2-56
Vibration
EN 300 019-1-5 V2, IEC-61373
Ingress Protection
IP21
APPROVALS AND TESTS
Safety
EN/ IEC 60 950
EMC
ETS 301 489-1
EMC for Railway Application
EN 50155, EN 50121-3-2
Radio
ETSI EN 300 609-4
xy: reserved for power supply type and remote control/GPS option.
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
D042-071628
Updated: 2009-11-18
158
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Advanced Train Repeaters
POWERWAVE
ATR1200/002xy (GSM900)
Advanced Train Repeater Module 900 MHz (GSM and
UMTS)
Advanced Train Repeater Module 900MHz (GSM/UMTS), bandwidth 25MHz
ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz)
890-915
Frequency Range Downlink (MHz)
935-960
Filter Bandwidth Adjustable (MHz)
0,5-25
Filter Settling Resolutions (KHz)
25
Gain Range
50-70 dB
Gain Step Resolution
1 dB
Gain Trail Dynamic Range
30 dB
Gain Trail Tracking Accuracy
2 dB
Output Power Composite (min)
+23 dBm (UL), +18 dBm (DL)
Noise Figure 70 dB Gain
8 dB
Maximum Input Power
+13 dBm
Power Supply
110 - 240 VAC, 110 DC or -24 to -48 VDC
Power Consumption
< 50 W
MECHANICAL SPECIFICATIONS
Dimensions WxDxH mm (in)
450 x 420 x 44 (17.7x 16.5 x 1.7)
Weight kg (lbs)
< 3 (6.6)
RF Connectors
SMA-Type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25°C to +45 °C
Humidity
EC 60068-2-56
Vibration
EN 300 019-1-5 V2, IEC-61373
Ingress Protection
IP21
APPROVALS AND TESTS
Safety
EN/ IEC 60 950
EMC
ETS 301 489-1
EMC for Railway Application
EN 50155, EN 50121-3-2
Radio
ETSI EN 300 609-4
xy: reserved for power supply type and remote control/GPS option.
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08660
Updated: 2010-01-03
159
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Advanced Train Repeaters
POWERWAVE
ATR1200/901xy (EGSM900)
Advanced Train Repeater Module 900 MHz (EGSM and
UMTS)
Advanced Train Repeater Module 900MHz (EGSM/UMTS), bandwidth 15MHz
ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz)
880-905
Frequency Range Downlink (MHz)
925-950
Filter Bandwidth Adjustable (MHz)
0,5-15
Filter Settling Resolutions (KHz)
25
Gain Range
50-70 dB
Gain Step Resolution
1 dB
Gain Trail Dynamic Range
30 dB
Gain Trail Tracking Accuracy
2 dB
Output Power Composite (min)
+24 dBm (UL), +18 dBm (DL)
Noise Figure 70 dB Gain
8 dB
Maximum Input Power
+13 dBm
Power Supply
110 - 240 VAC, 110 DC or -24 to -48 VDC
Power Consumption
< 50 W
MECHANICAL SPECIFICATIONS
Dimensions WxDxH mm (in)
450 x 420 x 44 (17.7x 16.5 x 1.7)
Weight kg (lbs)
< 3 (6.6)
RF Connectors
SMA-Type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25°C to +45 °C
Humidity
EC 60068-2-56
Vibration
EN 300 019-1-5 V2, IEC-61373
Ingress Protection
IP21
APPROVALS AND TESTS
Safety
EN/ IEC 60 950
EMC
ETS 301 489-1
EMC for Railway Application
EN 50155, EN 50121-3-2
Radio
ETSI EN 300 609-4
xy: reserved for power supply type and remote control/GPS option.
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08661
Updated: 2009-11-18
160
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Advanced Train Repeaters
POWERWAVE
ATR1200/902xy (EGSM900)
Advanced Train Repeater Module 900 MHz (GSM and
UMTS)
Advanced Train Repeater Module 900MHz (EGSM/UMTS), bandwidth 25MHz
ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz)
880-905
Frequency Range Downlink (MHz)
925-950
Filter Bandwidth Adjustable (MHz)
0,5-25
Filter Settling Resolutions (KHz)
25
Gain Range
50-70 dB
Gain Step Resolution
1 dB
Gain Trail Dynamic Range
30 dB
Gain Trail Tracking Accuracy
2 dB
Output Power Composite (min)
+24 dBm (UL), +18dBm (DL)
Noise Figure 70 dB Gain
8 dB
Maximum Input Power
+13 dBm
Power Supply
110 - 240 VAC, 110 DC or -24 to -48 VDC
Power Consumption
< 50 W
MECHANICAL SPECIFICATIONS
Dimensions WxDxH mm (in)
450 x 420 x 44 (17.7x 16.5 x 1.7)
Weight kg (lbs)
< 3 (6.6)
RF Connectors
SMA-Type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25°C to +45 °C
Humidity
EC 60068-2-56
Vibration
EN 300 019-1-5 V2, IEC-61373
Ingress Protection
IP21
APPROVALS AND TESTS
Safety
EN/ IEC 60 950
EMC
ETS 301 489-1
EMC for Railway Application
EN 50155, EN 50121-3-2
Radio
ETSI EN 300 609-4
xy: reserved for power supply type and remote control/GPS option.
All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08662
Updated: 2009-11-18
161
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Digital Repeaters
Repeater Products
Title
Frequency Range (MHz)
Bandwidth (MHz)
Part Number
Page
Nexus RT 850/1900
MHz Dual Band Digital
Repeater
824-849
25
NP50B0-22111
163
Nexus RT 850 MHz
Digital Repeater
824-849
25
NP5O-11111
164
Nexus RT 1900 MHz
Digital Repeater
1850-1910
60
NPBO-11111
165
162
Digital Repeaters
POWERWAVE
NP50B0-22111
Nexus RT 850/1900 MHz Dual Band Digital Repeater
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz)
824 - 849
1850 -1910
Frequency Range, Downlink (MHz)
869-894
1930 -1990
Instantaneous Bandwidth (MHz)
25 (850)
Number of sub-bands
60 (1900)
1 to 2 (850MHz), 1 to 5 (1900MHz)
Individual sub-band width, selectable (MHz)
1.5 2.5 10 11 25
Total sub-band width (MHz)
2.5 5 7.5 10 15 20
25
Gain adjustment range (1 dB steps)
60
55-85 dB
Output Power Downlink
+28 dBm composite
Output Power Downlink
+28 dBm composite
Output Power Uplink
+28 dBm composite
Output Power Uplink
+28 dBm composite
Noise Figure
6.6 dB (max. gain)
Feedback Cancellation
>20 dB
Alarm Fault
IP connection or wireless modem
Power Supply Options
110-120 VAC
Power Consumption
< 400 W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
381 x 305 x 229(15 x 12 x 9)
Weight lbs
< 50
RF Connectors
N-type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-30 °C to +50 °C
Casing Class
IP 50
APPROVALS AND TESTS
Safety
EN 60950, ETL
Environment
ETS 300 019
EMC
ETS 301 489-1
Radio
FCC Parts 22 and 24
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2009-04-20
163
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Digital Repeaters
POWERWAVE
NP5O-11111
Nexus RT 850 MHz Digital Repeater
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz)
824 - 849
Frequency Range, Downlink (MHz)
869-894
Instantaneous Bandwidth (MHz)
25
Number of sub-bands
1 to 2
Individual sub-band width, selectable (MHz)
1.5 2.5 10 11 25
Total sub-band width (MHz)
25
Gain adjustment range (1 dB steps)
55-85 dB
Output Power Downlink
+28 dBm composite
Output Power Downlink
+28 dBm composite
Output Power Uplink
+28 dBm composite
Output Power Uplink
+28 dBm composite
Noise Figure
6.6 dB (max. gain)
Feedback Cancellation
>20 dB
Alarm Fault
IP connection or wireless modem
Power Supply Options
110-120 VAC
Power Consumption
< 200 W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
381 x 305 x 229(15 x 12 x 9)
Weight lbs
40
RF Connectors
N-type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-30 °C to +50 °C
Casing Class
IP 50
APPROVALS AND TESTS
Safety
EN 60950, ETL
Environment
ETS 300 019
EMC
ETS 301 489-1
Radio
FCC Part 22
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2009-04-20
164
Digital Repeaters
POWERWAVE
NP50B0-22111
Nexus RT 850/1900 MHz Dual Band Digital Repeater
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz)
824 - 849
1850 -1910
Frequency Range, Downlink (MHz)
869-894
1930 -1990
Instantaneous Bandwidth (MHz)
25 (850)
Number of sub-bands
60 (1900)
1 to 2 (850MHz), 1 to 5 (1900MHz)
Individual sub-band width, selectable (MHz)
1.5 2.5 10 11 25
Total sub-band width (MHz)
2.5 5 7.5 10 15 20
25
Gain adjustment range (1 dB steps)
60
55-85 dB
Output Power Downlink
+28 dBm composite
Output Power Downlink
+28 dBm composite
Output Power Uplink
+28 dBm composite
Output Power Uplink
+28 dBm composite
Noise Figure
6.6 dB (max. gain)
Feedback Cancellation
>20 dB
Alarm Fault
IP connection or wireless modem
Power Supply Options
110-120 VAC
Power Consumption
< 400 W
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
381 x 305 x 229(15 x 12 x 9)
Weight lbs
< 50
RF Connectors
N-type Female
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-30 °C to +50 °C
Casing Class
IP 50
APPROVALS AND TESTS
Safety
EN 60950, ETL
Environment
ETS 300 019
EMC
ETS 301 489-1
Radio
FCC Parts 22 and 24
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2009-04-20
165
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Power wave
In-Building and
Outdoor DAS Products
Turnkey Projects
Public Safety Networks
We deliver complete turnkey solutions for wireless
coverage. We manage the entire project with full
responsibility, starting with analyzing and determining
required signal strength, quality and planning for future
expansion, right through implementation and operations.
All Powerwave turnkey systems are backed by full
performance guarantees, with full product and component
warranties for your peace of mind.
Commercial
Powerwave Products
As new wireless services, technologies and opportunities
emerge, the ability to rapidly adapt will become even more
vital to network operators, building owners and public safety
agencies. That’s why Powerwave engineers flexibility into
every system. It’s why we choose components that are
modular and adaptable. And it’s why our coverage solutions
are built from the ground up to be versatile.
Coverage Products
POWERWAVE
Bi-Directional Amplifiers
In-Building and Outdoor DAS Products
Public Safety Networks
Title
Frequency Range (MHz)
Gain Range
Part Number
Page
In-Hancer® Plus Series
380-430
Bi-Directional Amplifier
28-70 dB, 28-40 dB
(SB400-F2L & SB400-F4L)
SB400-A
168
In-Hancer® Plus Series
450-512
Bi-Directional Amplifier
28-70 dB, 28-40 dB
(SB400-F2L & SB400-F4L)
SB400-B
169
167
Bi-Directional Amplifiers
POWERWAVE
SB400-A
In-Hancer® Plus Series Bi-Directional Amplifier
Servicing UHF, the In-Hancer Plus Series includes reliable and cost-effective Bi-Directional Amplifiers (BDAs) designed to extend UHF coverage* into
enclosed environments experiencing coverage deficiency such as inside buildings, tunnels and garages.
MODULE SPECIFICATIONS
Frequency Range (MHz)
380-430
Passband Ripple
±2.5 dB
Digital Gain Adjustment
In 1 dB Increments
AGC Dynamic Range
25 dB
Gain Range
28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L)
ID 3rd Order Intercept Point IP3
+44 dBm
Noise Figure
<12 dB
Propagation Delay
<1 µs
Input Impedance
50 O
VSWR
<2:1
Maximum RF Input
+10 dBm
Primary Power
120/240 VAC, 50-60 Hz 100 VA, 150 VA Max
MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm)
26.28” x 24” x 12.25”
Weight (lbs)
120 lbs. approx
Operating Temperature Range (Celsius)
-10C to +50
Enclosure
Painted Steel - Wall Mount (Stainless Steel upgrade available)
ACCEPTANCE TYPE
FCC Type Acceptance
H6M-SB400
IC Type Acceptance
541A-SB400
Filtering Options
*Range
* Passband Bandwidth
SB400-F1
380-430 MHz
1.0 MHz
Tx to Rx Separation
5.0 MHz
SB400-F5
380-430 MHz
5.0 MHz
10.0 MHz
SB400-F2L
403-430 MHz
1.5 MHz
3.0 MHz
SB400-F2H1
403-430 MHz
1.5 MHz
3.0 MHz
SB400-F3
403-430 MHz
1.5 MHz
5.0 MHz
SB400-F4L
403-430 MHz
3.0 MHz
5.0 MHz
SB400-F4H1
403-430 MHz
3.0 MHz
5.0 MHz
SB400-F2H2
NA
1.5 MHz
3.0 MHz
SB400-F4H2
NA
3.0 MHz
5.0 MHz
SB400-F2H3
NA
1.5 MHz
3.0 MHz
SB400-F4H3
NA
3.0 MHz
5.0 MHz
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated 01/13/2010
168
Bi-Directional Amplifiers
POWERWAVE
SB400-B
In-Hancer® Plus Series Bi-Directional Amplifier
Servicing UHF, the In-Hancer Plus Series includes reliable and cost-effective Bi-Directional Amplifiers (BDAs) designed to extend UHF coverage* into
enclosed environments experiencing coverage deficiency such as inside buildings, tunnels and garages.
MODULE SPECIFICATIONS
Frequency Range (MHz)
450-512
Passband Ripple
±2.5 dB
Digital Gain Adjustment
In 1 dB Increments
AGC Dynamic Range
25 dB
Gain Range
28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L)
ID 3rd Order Intercept Point IP3
+44 dBm
Noise Figure
<12 dB
Propagation Delay
<1 µs
Input Impedance
50 O
VSWR
<2:1
Maximum RF Input
+10 dBm
Primary Power
120/240 VAC, 50-60 Hz 100 VA, 150 VA Max
MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm)
26.28” x 24” x 12.25”
Weight (lbs)
120 lbs. approx
Operating Temperature Range (Celsius)
-10C to +50
Enclosure
Painted Steel - Wall Mount (Stainless Steel upgrade available)
ACCEPTANCE TYPE
FCC Type Acceptance
H6M-SB400
IC Type Acceptance
541A-SB400
Filtering Options
*Range
* Passband Bandwidth
SB400-F1
450-512 MHz
1.0 MHz
Tx to Rx Separation
5.0 MHz
SB400-F5
450-512 MHz
5.0 MHz
10.0 MHz
SB400-F2L
450-512 MHz
1.5 MHz
3.0 MHz
SB400-F2H1
NA
1.5 MHz
3.0 MHz
SB400-F3
450-512 MHz
1.5 MHz
5.0 MHz
SB400-F4L
450-512 MHz
3.0 MHz
5.0 MHz
SB400-F4H1
NA
3.0 MHz
5.0 MHz
SB400-F2H2
450-4 70 MHz
1.5 MHz
3.0 MHz
SB400-F4H2
450-4 70 MHz
3.0 MHz
5.0 MHz
SB400-F2H3
470-512 MHz
1.5 MHz
3.0 MHz
SB400-F4H3
470-512 MHz
3.0 MHz
5.0 MHz
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated 01/13/2010
169
Coverage Products
POWERWAVE
LinkNet™ Convergence Platform
In-Building and Outdoor DAS Products
Public Safety Networks
Title
Frequency Range (MHz) Bandwidth
Part Number
LNKA800 Amplifier
806-940
Broadband Amplifier
LNKA800
171
LNKF400
406.125-430, 450-512
Narrowband FM 12.5 or 25
KHz
LNKF400
172
LNKC1900
Banded Repeater
N/A
0.25 MHz, 1.25 MHz,
5 MHz, 15 MHz
LNKC1900
173
LNKA900
890-960
Broadband Amplifier
LNKA900
174
LNKC1800
Banded Repeater
N/A
0.25 MHz, 1.25 MHz, 5 MHz,
15 MHz
LNKC1800
175
LNKF100
136-157, 155–174
Narrowband FM 12.5 or 25
KHz
LNKF100
176
LNKF800
806-824,851-869,
896-901,935-940
Narrowband FM 12.5 or 25
KHz
LNKF800
177
170
Page
LinkNet Convergence Platform
POWERWAVE
LNKA800
LNKA800 Amplifier
MODULE SPECIFICATIONS
Frequency Range (MHz)
806-940
Downlink Frequency Range (MHz)
NA
Uplink Frequency Range (MHz)
NA
Bandwidth
Broadband Amplifier
RF Gain Adjustment Range
+34 dB to +84 dB, in 1 dB increments
AGC Control Adjustment Range
+15 dBm to +30 dBm
RF Frequency Stability
NA
Maximum RF Output Power
NA
RF Output Power Range
NA
RF Output Power Variation
NA
Output Power 1
NA
Output Power 2
NA
Output Power 3
NA
Input Dynamic Range
NA
Input Sensitivity Adjust Range
NA
Input Hysteresis
NA
Adjacent Channel Sensitivity
NA
ID 3rd Order Intercept Point IP3
+47 dBm Typical
Noise Figure
<8 dB, 5 dB Typical
Transmit Duty Cycle
Continuous
Transmit Spurious
-13 dBm Maximum
Receive Conducted Spurious
-57 dBm Maximum
Group Delay
<200 nS
Audio Distortion and Noise
NA
Power Supply Module Requirements
40Watts Maximum
RF Connectors
SMA (50 O) Connectors on back of Chassis
DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.
Operating, Stand By, Fault, Program Mode
0RGXOHVPD\EHFRQILJXUHGYLDRSWLRQDO
*DWHZD\0RGXOHRUYLD3&DQGDQ56
&RQQHFWLRQ
Connections
Front Panel Indicators
Configuration Options
MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm)
2" x 9.11" x 14" (51 x 231.4 x 355.6)
Weight (lbs)
10
Operating Temperature Range (Celsius)
-10°C to +50°
Operating Humidity Range
10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE
FCC Type Acceptance
H6M-LNKA800
IC Type Acceptance
1541311246A
* Module Family
Type
Frequency
LNKA800-A
Broadband Amplifier
806-824 MHz
LNKA800-B
Broadband Amplifier
851-869 MHz
LNKA800-C
Broadband Amplifier
824-849 MHz
LNKA800-D
Broadband Amplifier
869-894 MHz
LNKA800-E
Broadband Amplifier
896-902 MHz
LNKA800-F
Broadband Amplifier
928-940 MHz
NA
NA
NA
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
#Error
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
171
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
LinkNet Convergence Platform
POWERWAVE
LNKF400
LNKF400
MODULE SPECIFICATIONS
Frequency Range (MHz)
406.125 - 430, 450 - 512 MHz
Downlink Frequency Range (MHz)
NA
Uplink Frequency Range (MHz)
NA
Bandwidth
Narrowband FM 12.5 or 25 KHz
RF Gain Adjustment Range
NA
AGC Control Adjustment Range
NA
RF Frequency Stability
Tracks input signal exactly
Maximum RF Output Power
+37 dBm
RF Output Power Range
+17 dBm to +37 dBm
RF Output Power Variation
+/- 1 dB
Output Power 1
NA
Output Power 2
NA
Output Power 3
NA
Input Dynamic Range
-110 dBm to -30 dBml
Input Sensitivity Adjust Range
-110 dBm to -50 dBm
Input Hysteresis
1 dB to 10 dB
Adjacent Channel Sensitivity
60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules
ID 3rd Order Intercept Point IP3
NA
Noise Figure
NA
Transmit Duty Cycle
Continuous
Transmit Spurious
-13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules
Receive Conducted Spurious
-57 dBm Maximum
Group Delay
<120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules
Audio Distortion and Noise
<4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules
Power Supply Module Requirements
45 Watts Maximum
RF Connectors
SMA (50 O) Connectors on back of Chassis
DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.
Operating, Stand By, Fault, Program Mode, Receive, Transmit
0RGXOHVPD\EHFRQILJXUHGYLDRSWLRQDO
*DWHZD\0RGXOHRUYLD3&DQGDQ56
&RQQHFWLRQ
Connections
Front Panel Indicators
Configuration Options
MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm)
2" x 9.11" x 14" (51 x 231.4 x 355.6)
Weight (lbs)
10
Operating Temperature Range (Celsius)
-10°C to +50°
Operating Humidity Range
10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE
FCC Type Acceptance
H6M-OFR400-A, H6M-OFR400
IC Type Acceptance
1541195680A
* Module Family
Type
Frequency
LNKF400-A1
25 KHz FM channels
406.125-430 MHz
LNKF400-A2
12.5 KHz FM channels
406.125-430 MHz
LNKF400-C1
25 KHz FM channels
450-470 MHz
LNKF400-C2
12.5 KHz FM channels
450-470 MHz
LNKF400-D1
25 KHz FM channels
470-490 MHz
LNKF400-D2
12.5 KHz FM channels
470-490 MHz
LNKF400-E1
25 KHz FM channels
490-512 MHz
LNKF400-E2
12.5 KHz FM channels
490-512 MHz
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
#Error
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
172
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
LinkNet Convergence Platform
POWERWAVE
LNKC1900
LNKC1900 Banded Repeater
MODULE SPECIFICATIONS
Frequency Range (MHz)
NA
Downlink Frequency Range (MHz)
1850-1910, 1930-1990
Uplink Frequency Range (MHz)
NA
Bandwidth
0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz
RF Gain Adjustment Range
+65 dB to +95 dB, in 1 dB increments
AGC Control Adjustment Range
NA
RF Frequency Stability
Tracks input signal exactly
Maximum RF Output Power
NA
RF Output Power Range
NA
RF Output Power Variation
NA
Output Power 1
1 Carrier: +27 dBm
Output Power 2
2 Carrier: +23 dBm each
Output Power 3
3 Carrier: +21 dBm each
Input Dynamic Range
NA
Input Sensitivity Adjust Range
NA
Input Hysteresis
NA
Adjacent Channel Sensitivity
NA
ID 3rd Order Intercept Point IP3
+44 dBm
Noise Figure
<6 dB
Transmit Duty Cycle
Continuous
Transmit Spurious
-13 dBm Maximum
Receive Conducted Spurious
-57 dBm Maximum
Group Delay
<5 µs for 0.25 MHz or 1.25 MHz Models, <3 µs for 5 MHz or 15 MHz Models
Audio Distortion and Noise
NA
Power Supply Module Requirements
40Watts Maximum
RF Connectors
SMA (50 O) Connectors on back of Chassis
DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.
Operating, Stand By, Fault, Program Mode
0RGXOHVPD\EHFRQILJXUHGYLDRSWLRQDO
*DWHZD\0RGXOHRUYLD3&DQGDQ56
&RQQHFWLRQ
Connections
Front Panel Indicators
Configuration Options
MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm)
2" x 9.11" x 14" (51 x 231.4 x 355.6)
Weight (lbs)
10
Operating Temperature Range (Celsius)
-10°C to +50°
Operating Humidity Range
10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE
FCC Type Acceptance
H6M-LNKC1900
IC Type Acceptance
1541311242A
* Module Family
Type
Frequency
LNKC1900-D.2
Downlink 0.25 MHz Bandwidth
1930-1990 MHz
LNKC1900-D
Downlink 1.25 MHz Bandwidth
1930-1990 MHz
LNKC1900-D5
Downlink 5 MHz Bandwidth
1930-1990 MHz
LNKC1900-D15
Downlink 15 MHz Bandwidth
1930-1990 MHz
LNKC1900-U.2
Uplink 0.25 MHz Band
1850-1910 MHz
LNKC1900-U
Uplink 1.25 MHz Bandwidth
1850-1910 MHz
LNKC1900-U5
Uplink 5 MHz Bandwidth
1850-1910 MHz
LNKC1900-U15
Uplink 15 MHz Bandwidth
1850-1910 MHz
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
#Error
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
173
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
LinkNet Convergence Platform
POWERWAVE
LNKA900
LNKA900
MODULE SPECIFICATIONS
Frequency Range (MHz)
890-960
Downlink Frequency Range (MHz)
NA
Uplink Frequency Range (MHz)
NA
Bandwidth
Broadband Amplifier
RF Gain Adjustment Range
+34 dB to +84 dB, in 1 dB increments
AGC Control Adjustment Range
+15 dBm to +30 dBm
RF Frequency Stability
NA
Maximum RF Output Power
NA
RF Output Power Range
NA
RF Output Power Variation
NA
Output Power 1
NA
Output Power 2
NA
Output Power 3
NA
Input Dynamic Range
NA
Input Sensitivity Adjust Range
NA
Input Hysteresis
NA
Adjacent Channel Sensitivity
NA
ID 3rd Order Intercept Point IP3
+47 dBm Typical
Noise Figure
<8 dB, 5 dB Typical
Transmit Duty Cycle
Continuous
Transmit Spurious
-13 dBm Maximum
Receive Conducted Spurious
-57 dBm Maximum
Group Delay
<200 nS
Audio Distortion and Noise
NA
Power Supply Module Requirements
40Watts Maximum
RF Connectors
SMA (50 O) Connectors on back of Chassis
DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.
Operating, Stand By, Fault, Program Mode
0RGXOHVPD\EHFRQILJXUHGYLDRSWLRQDO
*DWHZD\0RGXOHRUYLD3&DQGDQ56
&RQQHFWLRQ
Connections
Front Panel Indicators
Configuration Options
MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm)
2" x 9.11" x 14" (51 x 231.4 x 355.6)
Weight (lbs)
10
Operating Temperature Range (Celsius)
-10°C to +50°
Operating Humidity Range
10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE
FCC Type Acceptance
NA
IC Type Acceptance
NA
* Module Family
Type
Frequency
LNKA900-A
Broadband Amplifier
890-915 MHz
LNKA9800-B
Broadband Amplifier
935-960 MHz
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
#Error
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
174
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
LinkNet Convergence Platform
POWERWAVE
LNKC1800
LNKC1800 Banded Repeater
MODULE SPECIFICATIONS
Frequency Range (MHz)
NA
Downlink Frequency Range (MHz)
1805-1880
Uplink Frequency Range (MHz)
1710-1785
Bandwidth
0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz
RF Gain Adjustment Range
+65 dB to +95 dB, in 1 dB increments
AGC Control Adjustment Range
NA
RF Frequency Stability
Tracks input signal exactly
Maximum RF Output Power
NA
RF Output Power Range
NA
RF Output Power Variation
NA
Output Power 1
NA
Output Power 2
NA
Output Power 3
NA
Input Dynamic Range
NA
Input Sensitivity Adjust Range
NA
Input Hysteresis
NA
Adjacent Channel Sensitivity
NA
ID 3rd Order Intercept Point IP3
+44 dBm
Noise Figure
<6 dB
Transmit Duty Cycle
Continuous
Transmit Spurious
-13 dBm Maximum
Receive Conducted Spurious
-57 dBm Maximum
Group Delay
<5 µs for 0.25 MHz or 1.25 MHz Models, <3 µs for 5 MHz or 15 MHz Models
Audio Distortion and Noise
NA
Power Supply Module Requirements
40Watts Maximum
RF Connectors
SMA (50 O) Connectors on back of Chassis
DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.
Operating, Stand By, Fault, Program Mode
0RGXOHVPD\EHFRQILJXUHGYLDRSWLRQDO
*DWHZD\0RGXOHRUYLD3&DQGDQ56
&RQQHFWLRQ
Connections
Front Panel Indicators
Configuration Options
MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm)
2" x 9.11" x 14" (51 x 231.4 x 355.6)
Weight (lbs)
10
Operating Temperature Range (Celsius)
-10°C to +50°
Operating Humidity Range
10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE
FCC Type Acceptance
NA
IC Type Acceptance
NA
* Module Family
Type
Frequency
LNKC1800-D.2
Downlink 0.25 MHz Bandwidth
1805-1880 MHz
LNKC1800-D
Downlink 1.25 MHz Bandwidth
1805-1880 MHz
LNKC1800-D5
Downlink 5 MHz Bandwidth
1805-1880 MHz
LNKC1800-D15
Downlink 15 MHz Bandwidth
1805-1880 MHz
LNKC1800-U.2
Uplink 0.25 MHz Bandwidth
1710-1785 MHz
LNKC1800-U
Uplink 1.25 MHz Bandwidth
1710-1785 MHz
LNKC1800-U5
Uplink 5 MHz Bandwidth
1710-1785 MHz
LNKC1800-U15
Uplink 15 MHz Bandwidth
1710-1785 MHz
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
#Error
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
175
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
LinkNet Convergence Platform
POWERWAVE
LNKF100
LNKF100
MODULE SPECIFICATIONS
Frequency Range (MHz)
136 - 157, 155 - 174
Downlink Frequency Range (MHz)
NA
Uplink Frequency Range (MHz)
NA
Bandwidth
Narrowband FM 12.5 or 25 KHz
RF Gain Adjustment Range
NA
AGC Control Adjustment Range
NA
RF Frequency Stability
NA
Maximum RF Output Power
+37 dBm
RF Output Power Range
+20 dBm to +37 dBm
RF Output Power Variation
+/- 1 dB
Output Power 1
NA
Output Power 2
NA
Output Power 3
NA
Input Dynamic Range
-110 dBm to -30 dBml
Input Sensitivity Adjust Range
-110 dBm to -50 dBm
Input Hysteresis
1 dB to 10 dB
Adjacent Channel Sensitivity
60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules
ID 3rd Order Intercept Point IP3
NA
Noise Figure
NA
Transmit Duty Cycle
Continuous
Transmit Spurious
-13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules
Receive Conducted Spurious
-57 dBm Maximum
Group Delay
<120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules
Audio Distortion and Noise
<4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules
Power Supply Module Requirements
45 Watts Maximum
RF Connectors
SMA (50 O) Connectors on back of Chassis
DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.
Operating, Stand By, Fault, Program Mode, Receive, Transmit
0RGXOHVPD\EHFRQILJXUHGYLDRSWLRQDO
*DWHZD\0RGXOHRUYLD3&DQGDQ56
&RQQHFWLRQ
Connections
Front Panel Indicators
Configuration Options
MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm)
2" x 9.11" x 14" (51 x 231.4 x 355.6)
Weight (lbs)
10
Operating Temperature Range (Celsius)
-10°C to +50°
Operating Humidity Range
10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE
FCC Type Acceptance
NA
IC Type Acceptance
NA
* Module Family
Type
Frequency
LNKF100-A1
25 KHz FM channels
136-157 MHz
LNKF100-A2
12.5 KHz FM channels
136-157 MHz
LNKF100-B1
25 KHz FM channels
155-174 MHz
LNKF100-B2
12.5 KHz FM channels
155-174 MHz
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
#Error
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
176
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
LinkNet Convergence Platform
POWERWAVE
LNKF800
LNKF800
MODULE SPECIFICATIONS
Frequency Range (MHz)
806-824,851-869,896-901,935-940
Downlink Frequency Range (MHz)
NA
Uplink Frequency Range (MHz)
NA
Bandwidth
Narrowband FM 12.5 or 25 KHz
RF Gain Adjustment Range
NA
AGC Control Adjustment Range
NA
RF Frequency Stability
Tracks input signal exactly
Maximum RF Output Power
+38 dBm (+37 dBm for G2, H2 models)
RF Output Power Range
+17 dBm to +38 dBm (+37 dBm)
RF Output Power Variation
+/- 1 dB
Output Power 1
Output Power 2
Output Power 3
Input Dynamic Range
-110 dBm to -30 dBml
Input Sensitivity Adjust Range
-110 dBm to -50 dBm
Input Hysteresis
1 dB to 10 dB
Adjacent Channel Sensitivity
60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules
ID 3rd Order Intercept Point IP3
Noise Figure
Transmit Duty Cycle
Continuous
Transmit Spurious
-13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules
Receive Conducted Spurious
-57 dBm Maximum
Group Delay
<120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules
Audio Distortion and Noise
<4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules
Power Supply Module Requirements
45 Watts Maximum
RF Connectors
SMA (50 O) Connectors on back of Chassis
DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.
Operating, Stand By, Fault, Program Mode, Receive, Transmit
0RGXOHVPD\EHFRQILJXUHGYLDRSWLRQDO
*DWHZD\0RGXOHRUYLD3&DQGDQ56
&RQQHFWLRQ
Connections
Front Panel Indicators
Configuration Options
MECHANICAL CHARACTERISTICS
Dimensions HxWxD in (mm)
2" x 9.11" x 14" (51 x 231.4 x 355.6)
Weight (lbs)
10
Operating Temperature Range (Celsius)
-10°C to +50°
Operating Humidity Range
10 to 90% RH, Non-Condensing
ACCEPTANCE TYPE
FCC Type Acceptance
H6M-OFR800, H6M-LNKF800
IC Type Acceptance
1541195685A, 1541196848A
* Module Family
Type
Frequency
LNKF800-A1
25 KHz FM channels
806-824 MHz
LNKF800-B1
25 KHz FM channels
851-869 MHz
LNKF800-C2
12.5 KHz FM channels
806-824 MHz
LNKF800-D2
12.5 KHz FM channels
851-869 MHz
LNKF800-G2
12.5 KHz FM channels
896-901 MHz
LNKF800-H2
12.5 KHz FM channels
935-940 MHz
NA
NA
NA
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
#Error
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
177
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Optical and RF Conversion Modules
Optical and RF Conversion Modules
Powerwave Technologies, Inc.
When distributing wireless signals over large coverage areas or remote locations, a traditional coaxial
based distribution approach may pose problems. This is due to the increase in RF signal loss over
large distances, the length in which coaxial cable can be used and extensive equipment required on
site to deliver balanced coverage. Our Optical Conversion Modules and RF Conversion/Point of
Interconnect Modules are a solution to these problems.
Used in both In-Building and Outdoor DAS, Optical Conversion Modules and RF Conversion/Point of
Interconnect Modules leverage the inherent attributes of fiber optic technology, such as low
attenuation and noise, and provide extensive reach to deliver superior signal quality while reducing
infrastructure and site development costs.
Optical Conversion Module (OCM)
• Resides in a 19" rack unit for in-building applications
• Simplex in/output
• 1310nm and/or 1550nm
• Wave Division Multiplexing (WDM)
• 0 to 20 dB TX and RX attenuation
• Settable alarm levels
• 1 to 12 remotes from a single OCM (up to 3 fiber optic nodes in a single OCM)
RF Conversion Module/Point of Interconnect
• Passive wide-band element, "mini" filters/splitters/combiners
• +40dBm max RF input
• Sectorization - POI Independent carrier needs
178
Coverage Products
POWERWAVE
Tap-In® Signal Distribution Taps
In-Building and Outdoor DAS Products
Public Safety Networks
Title
Part Number
Page
Tap-In Signal Distribution Taps
Tap-In
180
179
Tap-In Signal Distribution Taps
POWERWAVE
Tap-In
1/2” Taps for Frequencies 100 MHz – 520 MHz
1/2" Taps for Frequencies 100 MHz – 520 MHz
Model Number
FCT5-12
FCT5-16
Nominal Coupling Loss
12 dB
16 dB
FCT5-20
20 dB
Insertion Loss @ 150 MHz
0.7 dB
0.5 dB
0.3 dB
Line Input Power
15 W
15 W
15 W
FCT7-20
5/8" Taps for Frequencies 100 MHz – 520 MHz
Model Number
FCT5-12
FCT7-16
Nominal Coupling Loss
12 dB
16 dB
20 dB
Insertion Loss @ 150 MHz
0.7 dB
0.5 dB
0.3 dB
Line Input Power
15 W
15 W
15 W
CCT5-20
1/2" Taps for Frequencies 300 MHz – 1000 MHz
Model Number
CCT5-12
CCT5-16
Nominal Coupling Loss
12 dB
16 dB
20 dB
Insertion Loss @ 450 MHz
0.5 dB
0.5 dB
0.3 dB
Line Input Power
15 W
45 W
90 W
CCT7-20
5/8" Taps for Frequencies 300 MHz – 1000 MHz
Model Number
CCT7-12
CCT7-16
Nominal Coupling Loss
12 dB
16 dB
20 dB
Insertion Loss @ 450 MHz
0.8 dB
0.5 dB
0.3 dB
Line Input Power
15 W
45 W
90 W
PCT5-12
PCT5-16
1/2" Taps for Frequencies 800 MHz – 2000 MHz
Model Number
Nominal Coupling Loss
12 dB
16 dB
Insertion Loss @ 1.9 GHz
0.8 dB
0.5 dB
Line Input Power
15 W
45 W
PCT7-12
PCT7-16
5/8" Taps for Frequencies 800 MHz – 2000 MHz
Model Number
Nominal Coupling Loss
12 dB
16 dB
Insertion Loss @ 1.9 GHz
0.8 dB
0.5 dB
Line Input Power
15 W
45 W
TAP-IN GENERAL SPECIFICATIONS
RF Output Impedance
50 O
Dimensions, WxHxD (in)
2” x 2” x 1.5”
Output Connector
TNC Female
Output Power (Maximum)
1W
EXACT TAP-IN DIAMETER MEASUREMENT
Tap In Diameter in (mm) 1/2" Taps
0.58” (14.73)
Tap In Diameter in (mm) 5/8" Taps
0.83” (21)
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-02
180
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Nexus™ FT Public Safety
In-Building and Outdoor DAS Products
Commercial
Title
Nexus FT Single
Band 700MHz for
Public Safety (PS)
and D block
Frequency
Band (UL)
PS: 788 to 805
MHz (includes
upper D block)
Frequency Band Gain Adjustment
(DL)
Range DL
PS: 758 to 775
MHz (includes
upper D block)
181
45 - 70 dB
Part Number
Page
RH700030/101
182
POWERWAVE
Nexus FT- Public Safety
RH700030/101
Nexus FT Single Band 700MHz for Public Safety (PS) and D block
Nexus FT 700 MHz Public Safety 20W, AC Pwr,WDM Fiber donor port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
PS: 788 to 805 MHz (includes upper D block)
Frequency Band DL
PS: 758 to 775 MHz (includes upper D block)
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
45 - 70 dB
Gain Adjustment Range UL
35 - 60 dB
Gain Step Resolution
1dB
Band 1 Output Power at Antenna Port
43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz)
Instantaneous Bandwidth
17 MHz
Intermodulation 9KHz - 1 GHz
-13 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
-13 dBm
Alarm
LED/SNMP
Power Supply Type
110 - 230 VAC
Power Consumption
210 W typical, 250 W Max
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465x530x195 (18 x 20.9 x 8.3)
Weight kg (lbs)
23 kg (50.7 lbs)
RF Connectors
7/16 DIN Female
Optical Connectors
FC-APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25C to +55C
Ingression Protectioin
IP-65 (NEMA4)
APPROVALS AND TESTS
Safety
UL60950-1
Radio
FCC CFR47 Parts 15,27,90
Environment
GR-36-CORE
EMC
FCC CFR47 Part 15, 27
*Carrier Count
Power Per Carrier
Composite Power
NA
NA
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
12
31dBm
43dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-02
182
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Wide Band Radio Heads
In-Building and Outdoor DAS Products
Commercial
Title
Dimension_HxWXD_mm_(ft)
Door Upgrade, Wide Band
440 x 530 x 195 (1’5”x1’9”x8”)
Radio Head (WRH)
Triple Band
900/1800/2100HP
Weight kg (lbs)
Part Number
<37 (82)
RH004000/003
184
RH621010
185
440 x 530 x 280 (1’ 5”x1’9”x11”) <37 (82)
183
Page
POWERWAVE
RH004000/003
Wide Band Radio Heads
Door Upgrade, Wide Band Radio Head (WRH) single band 850MHz,
for upgrade of single band 2W 1900MHz WRH base
ELECTRICAL DATA*
Frequency UL Band 1 (MHz)
N/A (base)
Frequency DL Band 1 (MHz)
N/A (base)
Frequency UL Band 2 (MHz)
824-849
Frequency DL Band 2 (MHz)
869-894
Frequency UL Band 3 (MHz)
N/A
Frequency DL Band 3 (MHz)
N/A
Frequency UL Band 4 (MHz)
N/A
Frequency DL Band 4 (MHz)
N/A
Gain Adjustment Range
(1dBsteps), 30 dB
Gain Step Resolution
1 dB
Max Absolute Delay
<300 ns
Max Input Power in UL
+13 dBm damaging level
Output Power DL, band 1, 4 carrier
N/A
Output Power DL, band 1, 8 carrier
N/A
Output Power DL, band 1, 16 carrier
N/A
Output Power DL, band 2, 4 carrier
4CDMA, 26dBm
Output Power DL, band 2, 8 carrier
8 CDMA, 23dBm
Output Power DL, band 3, 4 carrier
N/A
Output Power DL, band 3, 8 carrier
N/A
Output Power DL, band 4, 4 carrier
N/A
Output Power DL, band 4, 8 carrier
N/A
Noise Figure (excluding fiber)
4 dB
Intermodulation band 1
N/A
Intermodulation band 2
N/A
Intermodulation band 3
N/A
Intermodulation band 4
N/A
MISCELLANEOUS SPECIFICATIONS*
Alarm
Fault, LED and by remote control
Power Supply
115/230 VAC
Power Consumption
<110 W
MECHANICAL DATA*
Dimension (WxHxD) mm (ft)
440 x 530 x 195 (1’5”x1’9”x8”)
Weight kg (lbs)
<22.5 (82)
RF Connection
N-type female, duplexed service port,
ENVIRONMENTAL DATA*
Operating Temperature Celsius
Housing Specification
-25 to +55
Ingression Protection
N/A
NEMA 4 / IP65
APPROVALS AND TESTS*
Safety
EN 60950, ETL,
Environment
ETS 300 019-2.4E
Regulatory Compliance EMC
EN301 489-1
Regulatory Compliance Radio
FCC Part 24, 22
* All specifications subject to change.
Note: Performance is affected by the way Donor and Service antenna is configured (any combination of
separate or combined connection can be ordered)
Updated: 2010-05-04
184
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
RH621010
Wide Band Radio Heads
Triple Band 900/1800/2100HP
ELECTRICAL DATA*
Frequency UL Band 1 (MHz)
GSM 900, 890-915
Frequency DL Band 1 (MHz)
GSM 900, 935-960
Frequency UL Band 2 (MHz)
GSM 1800, 1710-1785
Frequency DL Band 2 (MHz)
GSM1800, 1805-1880
Frequency UL Band 3 (MHz)
UMTS, 1920-1980
Frequency DL Band 3 (MHz)
UMTS 2110-2170
Frequency UL Band 4 (MHz)
N/A
Frequency DL Band 4 (MHz)
N/A
Gain Adjustment Range
(1dBsteps), 30 dB
Gain Step Resolution
2 dB
Max Absolute Delay
<300 ns
Max Input Power in UL
+13 dBm damaging level
Output Power DL, band 1, 4 carrier
21dBm/carrier
Output Power DL, band 1, 8 carrier
18 dBm/carrier
Output Power DL, band 2, 4 carrier
23 dBm/carrier
Output Power DL, band 2, 8 carrier
20 dBm/carrier
Output Power DL, band 3, 4 carrier
30 dBm/carrier
Output Power DL, band 3, 8 carrier
27 dBm/carrier
Output Power DL, band 4, 4 carrier
N/A
Output Power DL, band 4, 8 carrier
N/A
Noise Figure (excluding fiber)
GSM900 4 dB, GSM1800 4 dB, UMTS2100 4.5 dB
Intermodulation band 1
GSM 900, -36 dBm
Intermodulation band 2
GSM 1800, -30 dBm
Intermodulation band 3
N/A
Intermodulation band 4
N/A
MISCELLANEOUS SPECIFICATIONS*
Alarm
Fault, LED and by remote control
Power Supply
115/230 VAC or 24/48 VDC
Power Consumption
<425 W
MECHANICAL DATA*
Dimension (WxHxD) mm (ft)
440 x 530 x 280 (1’ 5”x1’9”x11”)
Weight kg (lbs)
<37 (82)
RF Connection
N-type female or 7/16
ENVIRONMENTAL DATA*
Operating Temperature Celsius
Housing Specification
-25 to +55
Ingression Protection
Lock
NEMA 4 / IP67
APPROVALS AND TESTS*
Safety
EN 60950, ETL,
Environment
ETS 300 019
Regulatory Compliance EMC
EN301 489-1, TS125 113
Regulatory Compliance Radio
ETS300 609-4, TS125 143
* All specifications subject to change.
Note: Performance is affected by the way Donor and Service antenna is configured (any combination of
separate or combined connection can be ordered)
Updated: 2009-03-16
185
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Nexus™ FT Single and Dual Band
In-Building and Outdoor DAS Products
Commercial
Frequency Band
(UL)
Frequency
Band (DL)
Gain Adjustment
Range DL
Part Number
Page
824 - 849 MHz
869 - 894 MHz
25 dB (45 - 70 dB)
RH004002/001
189
Nexus FT Single
Band EGSM900
880-915 MHz
925-960 MHz
20 dB (45 – 65 dB)
RH100020/101
190
Nexus FT Single
Band EGSM900
880-915 MHz
925-960 MHz
20 dB (45 – 65 dB)
RH100020/211
191
Title
Nexus FT Cover
Upgrade 850 MHz
Single Band
Nexus FT Single
Band DCS1800
1710-1785 MHz 1805-1880 MHz
20 dB (45 – 65 dB)
RH200020/101
192
Nexus FT Single
Band DCS1800
1710-1785 MHz 1805-1880 MHz
20 dB (45 – 65 dB)
RH200020/211
193
Nexus FT Dual Band 1710-1785, 880- 1805-1880, 92520 dB (45 – 65 dB)
1800/900
915 MHz
960 MHz
RH201022/101
194
Nexus FT Dual Band 1710-1785, 880- 1805-1880, 92520 dB (45 – 65 dB)
1800/900
915 MHz
960 MHz
RH201022/211
195
Nexus FT 1900 MHz
1850 – 1910 MHz
Single Band
1930 - 1990
MHz
25 dB (45 – 70 dB)
RH300020/101
196
Nexus FT 1900 MHz
1850 – 1910 MHz
Single Band
1930 - 1990
MHz
25 dB (45 – 70 dB)
RH300020/211
197
Nexus FT Dual Band 1850-1910, 824- 1930-1990, 86925 dB (45 – 70 dB)
PCS/Cellular
849 MHz
894 MHz
RH304022/101
198
Nexus FT Dual Band 1850-1910, 824- 1930-1990, 86925 dB (45 – 70 dB)
PCS/Cellular
849 MHz
894 MHz
RH304022/211
199
Nexus FT Dual Band 1850-1910, 1710- 1930-1990,
PCS/AWS
1755 MHz
2110-2155 MHz
25 dB (45 – 70 dB)
RH309022/101
200
Nexus FT Dual Band 1850-1910, 1710- 1930-1990,
PCS/AWS
1755 MHz
2110-2155 MHz
25 dB (45 – 70 dB)
RH309022/211
201
186
Coverage Products
POWERWAVE
Nexus™ FT Single and Dual Band
In-Building and Outdoor DAS Products
Commercial
Frequency
Band (UL)
Frequency
Band (DL)
Gain Adjustment
Range DL
Part Number
Page
1850 – 1915
MHz
1930 - 1995 MHz
25 dB (45 – 70 dB)
RH330020/101
202
Nexus FT Dual Band
1850-1915, 824- 1930-1995, 869PCS/Cellular
849 MHz
894 MHz
Including G-block
25 dB (45 – 70 dB)
RH334022/101
203
Nexus FT 850 MHz
Single Band
824 – 849 MHz
869 – 894 MHz
25 dB (45 – 70 dB)
RH400020/101
204
Nexus FT 850 MHz
Single Band
824 – 849 MHz
869 – 894 MHz
25 dB (45 – 70 dB)
RH400020/211
205
Nexus FT Single
Band 800iDEN
806 – 824 MHz
851 – 869 MHz
25 dB (45 – 70 dB)
RH500020/101
206
Nexus FT Single
Band 800iDEN &
Public Safety
806 – 824 MHz
851 – 869 MHz
25 dB (45 – 70 dB)
RH500020/211
207
Nexus FT Single
Band 2100MHz
UMTS
1920-1980 MHz 2110-2170 MHz
20 dB (45 – 65 dB)
RH600020/101
208
Nexus FT Single
Band 2100MHz
UMTS
1920-1980 MHz 2110-2170 MHz
20 dB (45 – 65 dB)
RH600020/211
209
Nexus FT Dual Band
1920-1980, 880- 2110-2170, 925EGSM900 &
915 MHz
960 MHz
WCDMA2100
20 dB (45 – 65 dB)
RH601022/101
210
Nexus FT Dual Band
1920-1980, 880- 2110-2170, 925EGSM900 &
915 MHz
960 MHz
WCDMA2100
20 dB (45 – 65 dB)
RH601022/211
211
Nexus FT Dual Band
1920-1980, 2110-2170, 1805DCS1800 &
1710-1785 MHz
1880 MHz
WCDMA2100
20 dB (45 – 65 dB)
RH602022/101
212
20 dB (45 – 65 dB)
RH602022/211
213
45 - 70 dB
RH700030/101
214
Title
Nexus FT 1900 MHz
Including G-block
Single Band
Nexus FT Dual Band
1920-1980, 2110-2170, 1805DCS1800 &
1710-1785 MHz
1880 MHz
WCDMA2100
Nexus FT Single
PS: 788 to 805 PS: 758 to 775
Band 700MHz for
MHz (includes
MHz (includes
Public Safety (PS)
upper D block) upper D block)
and D block
187
Coverage Products
POWERWAVE
Nexus™ FT Single and Dual Band
In-Building and Outdoor DAS Products
Commercial
Frequency Band
Frequency
Gain Adjustment
Title
(UL)
Band (DL)
Range DL
Nexus FT Dual Band
788 to 805 MHz 758 to 775 MHz
700MHz for Public Safety (includes upper D (includes upper D
25 dB (45 – 70 dB)
(PS) and D block
block), 806 - 824 block), 851 - 869
/800iDEN
MHz
MHz
lower A, B and C A, B and C blocks
Nexus FT Single Band
blocks (698MHz(728MHz700MHz LTE (A,B,C AND 716MHz), upper C 746MHz), upper
45 - 70 dB
UPPER C BLOCKS)
block (776MHz- C block (746MHz787MHz)
757MHz)
Nexus FT Dual Band
806-824, 896-902 851-869, 935-941
900iDEN/800iDEN&Public
25 dB (45 – 70 dB)
MHz
MHz
Safety
Part Number
Page
RH705032/101
215
RH770020/101
216
RH805022/101
217
Nexus FT Dual Band
806-824, 896-902 851-869, 935-941
900iDEN/800iDEN&Public
25 dB (45 – 70 dB)
MHz
MHz
Safety
RH805022/211
218
Nexus FT Single Band
AWS
1710-1755 MHz
2110-2155 MHz
25 dB (45 – 70 dB)
RH900020/101
219
Nexus FT Single Band
AWS
1710-1755 MHz
2110-2155 MHz
25 dB (45 – 70 dB)
RH900020/211
220
188
Nexus FT Single and Dual Band
POWERWAVE
RH004002/001
Nexus FT Cover Upgrade 850 MHz Single Band
Cover Upgrade Configuration - AC powered, with one duplexed 7/16 DIN connector RF service port and coax RF donor
port.
ELECTRICAL SPECIFICATIONS
Frequency Band UL
824 - 849 MHz
Frequency Band DL
869 - 894 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 - 70 dB)
Gain Adjustment Range UL
25 dB (35 - 60 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
Maximum Composite Power 43 dBm
Instantaneous Bandwidth
Full Band
Intermodulation 9KHz - 1 GHz
<-13 dBm (FCC)
Intermodulation 1 GHz - 12.75 GHz ETSI
<-13 dBm (FCC)
Alarm
LED and by remote control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 156 (18 x 20.9 x 6.1)
Weight kg (lbs)
< 22 kg (48 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25 °C to +55 °C
Ingression Protectioin
IP65 / NEM A 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC CFR 47 part 22
Environment
ETS 300 019
EMC
EN 301 489
Carrier Count
Power Per Carrier FCC
Composite Power FCC
Power Per Carrier ETSI
Composite Power ETSI
2
40
43
29
32
4
37
43
29
35
8
34
43
29
38
16
31
43
28
40
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2009-03-10
189
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH100020/101
Nexus FT Single Band 900MHz
RH100020/101 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN
connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
880-915 MHz
Frequency Band DL
925-960 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
20 dB (45 – 65 dB)
Gain Adjustment Range UL
20 dB (35 – 55 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
Maximum Composite Power +40dBm applicable for GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE)
Instantaneous Bandwidth
35 MHz, EVM<7% , PCDE< -47dB, ACCR> 49dB[HSDPA+], EVM<7% , ACCR>48dB[LTE]
Intermodulation 9KHz - 1 GHz
<-36 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-30 dBm
Alarm
LED and by Remote Control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg (lbs)
< 25 kg. (55 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protectioin
IP65/NEMA4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
ETS 300 609-4, TS 25.143 , TS 36.143
Environment
ETS 300 019
EMC
EN 301 489
*Carrier Count
EGSM900 Power Per Carrier
Composite Power
Power Per Carrier ETSI
Composite Power ETSI
2
29dBm
32dBm
NA
NA
4
29dBm
35dBm
NA
NA
8
29dBm
38dBm
NA
NA
16
28dBm
40dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-08-25
190
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH100020/211
Nexus FT Single Band 900MHz
RH100020/211 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN
connector RF port and one RX diversity 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
880-915 MHz
Frequency Band DL
925-960 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
20 dB (45 – 65 dB)
Gain Adjustment Range UL
20 dB (35 – 55 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
Maximum Composite Power +40dBm* (Multi-carrier GSM or EDGE)
Instantaneous Bandwidth
35 MHz
Intermodulation 9KHz - 1 GHz
<-36 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-30 dBm
Alarm
LED and by Remote Control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg (lbs)
< 25 kg. (55 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protectioin
IP65/NEMA4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
ETS 300 609-4
Environment
ETS 300 019
EMC
EN 301 489
*Carrier Count
EGSM900 Power Per Carrier
Composite Power
Power Per Carrier ETSI
Composite Power ETSI
2
29dBm
32dBm
NA
NA
4
29dBm
35dBm
NA
NA
8
29dBm
38dBm
NA
NA
16
28dBm
40dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-18
191
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH200020/101
Nexus FT Single Band 1800MHz
RH200020/101 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN
connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1710-1785 MHz
Frequency Band DL
1805-1880 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
20 dB (45 – 65 dB)
Gain Adjustment Range UL
20 dB (35 – 55 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
Maximum Composite Power +40dBm applicable for GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE)
Instantaneous Bandwidth
75 MHz, EVM<5% , PCDE< -47dB, ACCR> 51dB[HSDPA+], EVM<7% , ACCR> 53dB[LTE]
Intermodulation 9KHz - 1 GHz
<-36 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-30 dBm
Alarm
LED and by Remote Control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg (lbs)
< 25 kg. (55 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protectioin
IP65/NEMA4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
ETS 300 609-4, TS 25.143 , TS 36.143
Environment
ETS 300 019
EMC
EN 301 489
*Carrier Count
DCS1800 Power Per Carrier
Composite Power
Power Per Carrier ETSI
Composite Power ETSI
2
35dBm
38dBm
NA
NA
4
34dBm
40dBm
NA
NA
8
31dBm
40dBm
NA
NA
16
28dBm
40dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-18
192
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH200020/211
Nexus FT Single Band DCS1800
RH200020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector
RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1710-1785 MHz
Frequency Band DL
1805-1880 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
20 dB (45 – 65 dB)
Gain Adjustment Range UL
20 dB (35 – 55 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
Maximum Composite Power +40dBm* (Multi-carrier GSM or EDGE)
Instantaneous Bandwidth
75 MHz
Intermodulation 9KHz - 1 GHz
<-36 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-30 dBm
Alarm
LED and by Remote Control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg (lbs)
< 25 kg. (55 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protectioin
IP65/NEMA4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
ETS 300 609-4
Environment
ETS 300 019
EMC
EN 301 489
*Carrier Count
DCS1800 Power Per Carrier
Composite Power
Power Per Carrier ETSI
Composite Power ETSI
2
35dBm
38dBm
NA
NA
4
34dBm
40dBm
NA
NA
8
31dBm
40dBm
NA
NA
16
28dBm
40dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-18
193
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH201022/101
Nexus FT Dual Band 1800/900
RH201022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1710-1785, 880-915 MHz
Frequency Band DL
1805-1880, 925-960 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
20 dB (45 – 65 dB)
Gain Adjustment Range UL
20 dB (35 – 55 dB)
Gain Step Resolution
1 dB
Output Power DL
Maximum composite power DCS1800 +40 dBm*
Output Power DL 2
Maximum composite power EGSM900 +40 dBm*
Instantaneous Bandwidth
Full Band
Intermodulation 9KHz - 1 GHz
<-36 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-30 dBm
Alarm
LED and by remote control
Power Supply Options
115/230 VAC
Power Consumption
420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg (lbs)
< 44 kg (96 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25 °C to +55 °C
Ingression Protection
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
ETSI EN 300 609-4
Environment
ETS 300 019 -2.4E
EMC
ETS 300 489-1
*Carrier Count
EGSM900? Power Per Carrier
EGSM900 Composite Power
DCS1800 Power Per Carrier
DCS1800 Composite Power
2
29dBm
32dBm
35dBm
38dBm
4
29dBm
35dBm
34dBm
40dBm
8
29dBm
38dBm
31dBm
40dBm
16
28dBm
40dBm
28dBm
40dBm
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-02
194
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH201022/211
Nexus FT Dual Band 1800/900
RH201022/211 is AC powered, with two duplexed 7/16 DIN connector RF ports, one each band and two RX diversity
7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1710-1785, 880-915 MHz
Frequency Band DL
1805-1880, 925-960 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
20 dB (45 – 65 dB)
Gain Adjustment Range UL
20 dB (35 – 55 dB)
Gain Step Resolution
1 dB
Output Power DL
Maximum composite power DCS1800 +40 dBm*
Output Power DL 2
Maximum composite power EGSM900 +40 dBm*
Instantaneous Bandwidth
Full Band
Intermodulation 9KHz - 1 GHz
<-36 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-30 dBm
Alarm
LED and by remote control
Power Supply Options
115/230 VAC
Power Consumption
420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg (lbs)
< 44 kg (96 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25 °C to +55 °C
Ingression Protection
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
ETSI EN 300 609-4
Environment
ETS 300 019 -2.4E
EMC
ETS 300 489-1
*Carrier Count
EGSM900 Power Per Carrier
EGSM900 Composite Power
DCS1800 Power Per Carrier
DCS1800 Composite Power
2
29dBm
32dBm
35dBm
38dBm
4
29dBm
35dBm
34dBm
40dBm
8
29dBm
38dBm
31dBm
40dBm
16
28dBm
40dBm
28dBm
40dBm
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-01
195
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH300020/101
Nexus FT 1900 MHz Single Band
RH300020/101 is AC powered, with one duplexed 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1850 – 1910 MHz
Frequency Band DL
1930 - 1990 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (35 – 60 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
Maximum Composite power 43 dBm
Instantaneous Bandwidth
Full Band
Intermodulation 9KHz - 1 GHz
<-13 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-13 dBm
Alarm
LED and by remote control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg (lbs)
< 25 kg (55 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25 °C to +55 °C
Ingression Protectioin
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC CFR 47 Part 15 and 24
Environment
EMC
*Carrier Count
Power Per Carrier FCC
Composite Power FCC
Power Per Carrier ETSI
Composite Power ETSI
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
16
31dBm
43dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
#Error
196
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH300020/211
Nexus FT 1900 MHz Single Band
RH300020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector
RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1850 – 1910 MHz
Frequency Band DL
1930 - 1990 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (35 – 60 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
Maximum Composite power 43 dBm
Instantaneous Bandwidth
Full Band
Intermodulation 9KHz - 1 GHz
<-13 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-13 dBm
Alarm
LED and by remote control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg (lbs)
< 25 kg (55 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25 °C to +55 °C
Ingression Protectioin
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC CFR 47 Part 15 and 24
Environment
EMC
*Carrier Count
Power Per Carrier FCC
Composite Power FCC
Power Per Carrier ETSI
Composite Power ETSI
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
16
31dBm
43dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
#Error
197
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH304022/101
Nexus FT Dual Band PCS/Cellular
RH304022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1850-1910, 824-849 MHz
Frequency Band DL
1930-1990, 869-894 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (35 – 60 dB)
Gain Step Resolution
1 dB
Output Power DL
+43 dBm (1900 MHz, Downlink , Composite)
Output Power DL 2
+43 dBm (800 MHz, Downlink , Composite)
Instantaneous Bandwidth
65MHz (PCS), 25MHz (Cellular)
Intermodulation 9KHz - 1 GHz
<-13dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-13dBm
Alarm
LED and by remote control
Power Supply Options
115/230 VAC
Power Consumption
420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 280 (18.3 x 20.9 x 12)
Weight kg (lbs)
< 44 kg (96 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protection
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC Part 24, FCC part 22
Environment
ETS 300 019 -2.4E
EMC
ETS 300 489-1
Carrier Count *
Power Per Carrier
Composite Power
Power Per Carrier
Composite Power
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
12
32dBm
43dBm
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-01
198
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH304022/211
Nexus FT Dual Band PCS/Cellular
RH304022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in
each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1850-1910, 824-849 MHz
Frequency Band DL
1930-1990, 869-894 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (35 – 60 dB)
Gain Step Resolution
1 dB
Output Power DL
+43 dBm (1900 MHz, Downlink , Composite)
Output Power DL 2
+43 dBm (800 MHz, Downlink , Composite)
Instantaneous Bandwidth
NA
Intermodulation 9KHz - 1 GHz
NA
Intermodulation 1 GHz - 12.75 GHz ETSI
NA
Alarm
LED and by remote control
Power Supply Options
115/230 VAC
Power Consumption
420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 280 (18.3 x 20.9 x 12)
Weight kg (lbs)
< 44 kg (96 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protection
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC Part 24, FCC part 22
Environment
ETS 300 019 -2.4E
EMC
ETS 300 489-1
Carrier Count *
Power Per Carrier
Composite Power
Power Per Carrier
Composite Power
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
12
32dBm
43dBm
NA
NA
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-01
199
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH309022/101
Nexus FT Dual Band PCS/AWS
RH309022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1850-1910, 1710-1755 MHz
Frequency Band DL
1930-1990, 2110-2155 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (35 – 60 dB)
Gain Step Resolution
1 dB
Output Power DL
+43 dBm (1900 MHz, Downlink , Composite)
Output Power DL 2
+43 dBm (2100 MHz, Downlink , Composite)*
Instantaneous Bandwidth
NA
Intermodulation 9KHz - 1 GHz
NA
Intermodulation 1 GHz - 12.75 GHz ETSI
NA
Alarm
LED and by remote control
Power Supply Options
115/230 VAC
Power Consumption
420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg (lbs)
< 44 kg (96 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protection
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC Part 24, FCC part 27
Environment
ETS 300 019 -2.4E
EMC
ETS 300 489-1
Carrier Count *
Power Per Carrier
Composite Power
Power Per Carrier
Composite Power
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
12
32dBm
43dBm
NA
NA
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-01
200
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH309022/211
Nexus FT Dual Band PCS/AWS
RH309022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in
each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1850-1910, 1710-1755 MHz
Frequency Band DL
1930-1990, 2110-2155 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (35 – 60 dB)
Gain Step Resolution
1 dB
Output Power DL
+43 dBm (1900 MHz, Downlink , Composite)
Output Power DL 2
+43 dBm (2100 MHz, Downlink , Composite)*
Instantaneous Bandwidth
NA
Intermodulation 9KHz - 1 GHz
NA
Intermodulation 1 GHz - 12.75 GHz ETSI
NA
Alarm
LED and by remote control
Power Supply Options
115/230 VAC
Power Consumption
420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg (lbs)
< 44 kg (96 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protection
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC Part 24, FCC part 27
Environment
ETS 300 019 -2.4E
EMC
ETS 300 489-1
Carrier Count *
Power Per Carrier
Composite Power
Power Per Carrier
Composite Power
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
12
32dBm
43dBm
NA
NA
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-01
201
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH330020/101
Nexus FT 1900 MHz Including G-block Single Band
RH330020/101 is AC powered, with one duplexed 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1850 – 1915 MHz
Frequency Band DL
1930 - 1995 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (35 – 60 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
Maximum Composite power 43 dBm
Instantaneous Bandwidth
65MHz
Intermodulation 9KHz - 1 GHz
<-13 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-13 dBm
Alarm
LED and by remote control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg (lbs)
< 25 kg (55 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25 °C to +55 °C
Ingression Protectioin
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC CFR 47 Part 15 and 24
Environment
EMC
*Carrier Count
Power Per Carrier FCC
Composite Power FCC
Power Per Carrier ETSI
Composite Power ETSI
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
16
31dBm
43dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-01-06
202
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH334022/101
Nexus FT Dual Band PCS/Cellular Including G-block
RH334022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1850-1915, 824-849 MHz
Frequency Band DL
1930-1995, 869-894 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (35 – 60 dB)
Gain Step Resolution
1 dB
Output Power DL
+43 dBm (1900 MHz, Downlink , Composite)
Output Power DL 2
+43 dBm (800 MHz, Downlink , Composite)
Instantaneous Bandwidth
65MHz (PCS), 25MHz (Cellular)
Intermodulation 9KHz - 1 GHz
<-13dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-13dBm
Alarm
LED and by remote control
Power Supply Options
115/230 VAC
Power Consumption
420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 280 (18.3 x 20.9 x 12)
Weight kg (lbs)
< 44 kg (96 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protection
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC Part 24, FCC part 22
Environment
ETS 300 019 -2.4E
EMC
ETS 300 489-1
Carrier Count *
Power Per Carrier
Composite Power
Power Per Carrier
Composite Power
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
12
32dBm
43dBm
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-01
203
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH400020/101
Nexus FT 850 MHz Single Band
RH400020/101 is AC powered, with one duplexed 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
824 – 849 MHz
Frequency Band DL
869 – 894 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (35 – 60 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
Maximum Composite power 43 dBm
Instantaneous Bandwidth
Full Band
Intermodulation 9KHz - 1 GHz
<-13 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-13 dBm
Alarm
LED and by remote control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg (lbs)
< 25 kg (55 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25 °C to +55 °C
Ingression Protectioin
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC CFR 47 Part 22
Environment
EMC
*Carrier Count
Power Per Carrier FCC
Composite Power FCC
Power Per Carrier ETSI
Composite Power ETSI
2
40dBm
43dBm
29dBm
32dBm
4
37dBm
43dBm
29dBm
35dBm
8
34dBm
43dBm
29dBm
38dBm
16
31dBm
43dBm
28dBm
40dBm
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
#Error
204
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH400020/211
Nexus FT 850 MHz Single Band
RH400020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector
RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
824 – 849 MHz
Frequency Band DL
869 – 894 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (35 – 60 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
Maximum Composite power 43 dBm
Instantaneous Bandwidth
Full Band
Intermodulation 9KHz - 1 GHz
<-13 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-13 dBm
Alarm
LED and by remote control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg (lbs)
< 25 kg (55 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25 °C to +55 °C
Ingression Protectioin
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC CFR 47 Part 22
Environment
EMC
*Carrier Count
Power Per Carrier FCC
Composite Power FCC
Power Per Carrier ETSI
Composite Power ETSI
2
40dBm
43dBm
29dBm
32dBm
4
37dBm
43dBm
29dBm
35dBm
8
34dBm
43dBm
29dBm
38dBm
16
31dBm
43dBm
28dBm
40dBm
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
#Error
205
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH500020/101
Nexus FT Single Band 800iDEN
RH500020/101 is AC powered, with one duplexed 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
806 – 824 MHz
Frequency Band DL
851 – 869 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (45 – 70 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
+43 dBm (iDEN800, Downlink , Quad BR)
Instantaneous Bandwidth
NA
Intermodulation 9KHz - 1 GHz
NA
Intermodulation 1 GHz - 12.75 GHz ETSI
NA
Alarm
LED and by remote control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg (lbs)
< 25 kg (55 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protectioin
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC CFR 47 Part 15, Part 90
Environment
ETS 300 019 -2.4E
EMC
ETS 300 489-1
Carrier Count *
Power Per Carrier
Composite Power
Power Per Carrier ETSI
Composite Power ETSI
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
12
32dBm
43dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2009-11-17
206
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH500020/211
Nexus FT Single Band 800iDEN&Public Safety
RH500020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector
RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
806 – 824 MHz
Frequency Band DL
851 – 869 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (45 – 70 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
+43 dBm (iDEN800, Downlink , Quad BR)
Instantaneous Bandwidth
NA
Intermodulation 9KHz - 1 GHz
NA
Intermodulation 1 GHz - 12.75 GHz ETSI
NA
Alarm
LED and by remote control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg (lbs)
< 25 kg (55 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protectioin
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC CFR 47 Part 15, Part 90
Environment
ETS 300 019 -2.4E
EMC
ETS 300 489-1
Carrier Count *
Power Per Carrier
Composite Power
Power Per Carrier ETSI
Composite Power ETSI
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
12
32dBm
43dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
#Error
207
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH600020/101
Nexus FT Single Band 2100MHz UMTS
RH600020/101 is AC powered, with one duplexed 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1920-1980 MHz
Frequency Band DL
2110-2170 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
20 dB (45 – 65 dB)
Gain Adjustment Range UL
20 dB (35 – 55 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
Maximum composite power +43dBm*
Instantaneous Bandwidth
60 MHz
Intermodulation 9KHz - 1 GHz
<-36 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-30 dBm
Alarm
LED and by remote control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg (lbs)
< 25 kg (55 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protectioin
IP65/NEMA4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
ESTI EN 301 908-11
Environment
ETS 300 019
EMC
ETS 300 489-1
*Carrier Count
Power Per Carrier
Composite Power
Power Per Carrier ETSI
Composite Power ETSI
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
8
34dBm
43dBm
NA
NA
12
32dBm
43dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2009-01-15
208
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH600020/211
Nexus FT Single Band 2100MHz UMTS
RH600020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector
RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1920-1980 MHz
Frequency Band DL
2110-2170 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
20 dB (45 – 65 dB)
Gain Adjustment Range UL
20 dB (35 – 55 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
Maximum composite power +43dBm*
Instantaneous Bandwidth
60 MHz
Intermodulation 9KHz - 1 GHz
<-36 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-30 dBm
Alarm
LED and by remote control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg (lbs)
< 25 kg (55 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protectioin
IP65/NEMA4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
ESTI EN 301 908-11
Environment
ETS 300 019
EMC
ETS 300 489-1
*Carrier Count
Power Per Carrier
Composite Power
Power Per Carrier ETSI
Composite Power ETSI
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
8
34dBm
43dBm
NA
NA
12
32dBm
43dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2009-01-15
209
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH601022/101
Nexus FT Dual Band EGSM900 & WCDMA2100
RH601022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1920-1980, 880-915 MHz
Frequency Band DL
2110-2170, 925-960 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
20 dB (45 – 65 dB)
Gain Adjustment Range UL
20 dB (35 – 55 dB)
Gain Step Resolution
1 dB
Output Power DL
Maximum composite power WCDMA2100 +43dBm*
Output Power DL 2
Maximum composite power EGSM900 +40 dBm*
Instantaneous Bandwidth
Full Band
Intermodulation 9KHz - 1 GHz
<-36 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-30 dBm
Alarm
LED and by remote control
Power Supply Options
115/230 VAC
Power Consumption
420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg (lbs)
< 44 kg (96 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25 °C to +55 °C
Ingression Protection
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
ETSI EN 300 609-4 and EN 301 908-11
Environment
ETS 300 019 -2.4E
EMC
ETS 300 489-1
*Carrier Count
EGSM900 Power Per Carrier
EGSM900 Composite Power
WCDMAS 2100 Power Per
Carrier
WCDMAS 2100 Composite
Power
2
29dBm
32dBm
40dBm
43dBm
4
29dBm
35dBm
37dBm
43dBm
8
29dBm
38dBm
34dBm
43dBm
16
28dBm
40dBm
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-01
210
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH601022/211
Nexus FT Dual Band EGSM900 & WCDMA2100
RH601022/211 is AC powered, with two duplexed 7/16 DIN connector RF ports, one each band and two RX diversity
7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1920-1980, 880-915 MHz
Frequency Band DL
2110-2170, 925-960 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
20 dB (45 – 65 dB)
Gain Adjustment Range UL
20 dB (35 – 55 dB)
Gain Step Resolution
1 dB
Output Power DL
Maximum composite power WCDMA2100 +43dBm*
Output Power DL 2
Maximum composite power EGSM900 +40 dBm*
Instantaneous Bandwidth
Full Band
Intermodulation 9KHz - 1 GHz
<-36 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-30 dBm
Alarm
LED and by remote control
Power Supply Options
115/230 VAC
Power Consumption
420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg (lbs)
< 44 kg (96 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25 °C to +55 °C
Ingression Protection
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
ETSI EN 300 609-4 and EN 301 908-11
Environment
ETS 300 019 -2.4E
EMC
ETS 300 489-1
*Carrier Count
EGSM900 Power Per Carrier
EGSM900 Composite Power
WCDMAS 2100 Power Per
Carrier
WCDMAS 2100 Composite
Power
2
29dBm
32dBm
40dBm
43dBm
4
29dBm
35dBm
37dBm
43dBm
8
29dBm
38dBm
34dBm
43dBm
16
28dBm
40dBm
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-01
211
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH602022/101
Nexus FT Dual Band DCS1800 & WCDMA2100
RH602022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1920-1980, 1710-1785 MHz
Frequency Band DL
2110-2170, 1805-1880 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
20 dB (45 – 65 dB)
Gain Adjustment Range UL
20 dB (35 – 55 dB)
Gain Step Resolution
1 dB
Output Power DL
Maximum composite power WCDMA2100 +43dBm*
Output Power DL 2
Maximum composite power DCS1800 +40 dBm*
Instantaneous Bandwidth
Full Band
Intermodulation 9KHz - 1 GHz
<-36 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-30 dBm
Alarm
LED and by remote control
Power Supply Options
115/230 VAC
Power Consumption
420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg (lbs)
< 44 kg (96 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25 °C to +55 °C
Ingression Protection
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
ETSI EN 300 609-4 and EN 301 908-11
Environment
ETS 300 019
EMC
ETS 300 489-1
*Carrier Count
DCS1800 Power Per Carrier
DCS1800 Composite Power
WCDMA 2100 Power Per
Carrier
WCDMA 2100 Composite
Power
2
35dBm
38dBm
40dBm
43dBm
4
34dBm
40dBm
37dBm
43dBm
8
31dBm
40dBm
34dBm
43dBm
12
29dBm
40dBm
32dBm
43dBm
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-01
212
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH602022/211
Nexus FT Dual Band DCS1800 & WCDMA2100
RH602022/211 is AC powered, with two duplexed 7/16 DIN connector RF ports, one each band and two RX diversity
7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1920-1980, 1710-1785 MHz
Frequency Band DL
2110-2170, 1805-1880 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
20 dB (45 – 65 dB)
Gain Adjustment Range UL
20 dB (35 – 55 dB)
Gain Step Resolution
1 dB
Output Power DL
Maximum composite power WCDMA2100 +43dBm*
Output Power DL 2
Maximum composite power DCS1800 +40 dBm*
Instantaneous Bandwidth
Full Band
Intermodulation 9KHz - 1 GHz
<-36 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
<-30 dBm
Alarm
LED and by remote control
Power Supply Options
115/230 VAC
Power Consumption
420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg (lbs)
< 44 kg (96 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25 °C to +55 °C
Ingression Protection
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
ETSI EN 300 609-4 and EN 301 908-11
Environment
ETS 300 019
EMC
ETS 300 489-1
*Carrier Count
DCS1800 Power Per Carrier
DCS1800 Composite Power
WCDMA 2100 Power Per
Carrier
WCDMA 2100 Composite
Power
2
35dBm
38dBm
40dBm
43dBm
4
34dBm
40dBm
37dBm
43dBm
8
31dBm
40dBm
34dBm
43dBm
12
29dBm
40dBm
32dBm
43dBm
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-01
213
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH700030/101
Nexus FT Single Band 700MHz for Public Safety (PS) and D block
Nexus FT 700 MHz Public Safety 20W, AC Pwr,WDM Fiber donor port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
PS: 788 to 805 MHz (includes upper D block)
Frequency Band DL
PS: 758 to 775 MHz (includes upper D block)
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
45 - 70 dB
Gain Adjustment Range UL
35 - 60 dB
Gain Step Resolution
1dB
Band 1 Output Power at Antenna Port
43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz)
Instantaneous Bandwidth
17 MHz
Intermodulation 9KHz - 1 GHz
-13 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
-13 dBm
Alarm
LED/SNMP
Power Supply Type
110 - 230 VAC
Power Consumption
210 W typical, 250 W Max
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465x530x195 (18 x 20.9 x 8.3)
Weight kg (lbs)
23 kg (50.7 lbs)
RF Connectors
7/16 DIN Female
Optical Connectors
FC-APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25C to +55C
Ingression Protectioin
IP-65 (NEMA4)
APPROVALS AND TESTS
Safety
UL60950-1
Radio
FCC CFR47 Parts 15,27,90
Environment
GR-36-CORE
EMC
FCC CFR47 Part 15, 27
*Carrier Count
Power Per Carrier
Composite Power
NA
NA
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
12
31dBm
43dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-02
214
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH705032/101
Nexus FT Dual Band 700MHz for Public Safety (PS) and D
block /800iDEN
RH705032/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL
788 to 805 MHz (includes upper D block), 806 - 824 MHz
Frequency Band DL
758 to 775 MHz (includes upper D block), 851 - 869 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (35 – 60 dB)
Gain Step Resolution
1 dB
Output Power DL
43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz)
Output Power DL 2
+43 dBm (iDEN800, Downlink , Quad BR)
Instantaneous Bandwidth
17MHZ (700 PS)
Intermodulation 9KHz - 1 GHz
NA
Intermodulation 1 GHz - 12.75 GHz ETSI
NA
Alarm
LED and by remote control
Power Supply Options
115/230 VAC
Power Consumption
420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg (lbs)
< 44 kg (96 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protection
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC Part 15, FCC part 90
Environment
ETS 300 019 -2.4E
EMC
ETS 300 489-1
Carrier Count *
Power Per Carrier
Composite Power
Power Per Carrier
Composite Power
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
12
32dBm
43dBm
NA
NA
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-10-28
215
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH770020/101
Nexus FT Single Band 700MHz LTE (A,B,C AND UPPER C
BLOCKS)
Nexus FT 700 MHz LTE 20W, AC Pwr,WDM Fiber donor port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
lower A, B and C blocks (698MHz-716MHz), upper C block (776MHz-787MHz)
Frequency Band DL
A, B and C blocks (728MHz-746MHz), upper C block (746MHz-757MHz)
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
45 - 70 dB
Gain Adjustment Range UL
35 - 60 dB
Gain Step Resolution
1dB
Band 1 Output Power at Antenna Port
43 dBm
Instantaneous Bandwidth
Upper Band 11 MHz, lower Band 18 MHz
Intermodulation 9KHz - 1 GHz
-13 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
-13 dBm
Alarm
LED/SNMP
Power Supply Type
110 - 230 VAC
Power Consumption
210 W typical, 250 W Max
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465x530x195 (18 x 20.9 x 8.3)
Weight kg (lbs)
23 kg (50.7 lbs)
RF Connectors
7/16 DIN Female
Optical Connectors
FC-APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
-25C to +55C
Ingression Protectioin
IP-65 (NEMA4)
APPROVALS AND TESTS
Safety
UL60950-1
Radio
FCC CFR47 Parts 15,27,90
Environment
GR-36-CORE
EMC
FCC CFR47 Part 15, 27
*Carrier Count
Power Per Carrier
Composite Power
NA
NA
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
12
31dBm
43dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-03-29
216
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH805022/101
Nexus FT Dual Band 900iDEN/800iDEN&Public Safety
RH805022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL
806-824, 896-902 MHz
Frequency Band DL
851-869, 935-941 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (35 – 60 dB)
Gain Step Resolution
1 dB
Output Power DL
+43 dBm (iDEN800, Downlink , Quad BR)
Output Power DL 2
+43 dBm (iDEN800, Downlink , Quad BR)
Instantaneous Bandwidth
NA
Intermodulation 9KHz - 1 GHz
NA
Intermodulation 1 GHz - 12.75 GHz ETSI
NA
Alarm
LED and by remote control
Power Supply Options
115/230 VAC
Power Consumption
420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg (lbs)
< 44 kg (96 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protection
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC Part 15, FCC part 90
Environment
ETS 300 019 -2.4E
EMC
ETS 300 489-1
Carrier Count *
Power Per Carrier
Composite Power
Power Per Carrier
Composite Power
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
12
32dBm
43dBm
NA
NA
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-01
217
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH805022/211
Nexus FT Dual Band 900iDEN/800iDEN&Public Safety
RH805022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in
each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL
806-824, 896-902 MHz
Frequency Band DL
851-869, 935-941 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (35 – 60 dB)
Gain Step Resolution
1 dB
Output Power DL
+43 dBm (iDEN800, Downlink , Quad BR)
Output Power DL 2
+43 dBm (iDEN800, Downlink , Quad BR)
Instantaneous Bandwidth
NA
Intermodulation 9KHz - 1 GHz
NA
Intermodulation 1 GHz - 12.75 GHz ETSI
NA
Alarm
LED and by remote control
Power Supply Options
115/230 VAC
Power Consumption
420 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 310 (18.3 x 20.9 x 12.3)
Weight kg (lbs)
< 44 kg (96 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protection
IP65 / NEMA 4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC Part 15, FCC part 90
Environment
ETS 300 019 -2.4E
EMC
ETS 300 489-1
Carrier Count *
Power Per Carrier
Composite Power
Power Per Carrier
Composite Power
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
12
32dBm
43dBm
NA
NA
NA
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-01
218
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH900020/101
Nexus FT Single Band AWS
RH900020/101 is AC powered, with one duplexed 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1710-1755 MHz
Frequency Band DL
2110-2155 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (35 – 60 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
Maximum composite power +43dBm*
Instantaneous Bandwidth
45 MHz
Intermodulation 9KHz - 1 GHz
<-13 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
NA
Alarm
LED and by remote control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg (lbs)
< 25 kg (55 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protectioin
IP65/NEMA4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC Part 27
Environment
ETS 300 019
EMC
ETS 300 489-1
*Carrier Count
Power Per Carrier
Composite Power
Power Per Carrier ETSI
Composite Power ETSI
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
12
32dBm
43dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-06-21
219
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Single and Dual Band
POWERWAVE
RH900020/211
Nexus FT Single Band AWS
RH900020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector
RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1710-1755 MHz
Frequency Band DL
2110-2155 MHz
Fiber Link Budget
10 dBo
Gain Adjustment Range DL
25 dB (45 – 70 dB)
Gain Adjustment Range UL
25 dB (35 – 60 dB)
Gain Step Resolution
1 dB
Band 1 Output Power at Antenna Port
Maximum composite power +43dBm*
Instantaneous Bandwidth
45 MHz
Intermodulation 9KHz - 1 GHz
<-13 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
NA
Alarm
LED and by remote control
Power Supply Type
115/230 VAC
Power Consumption
210 W Typical
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
465 x 530 x 211 (18 x 20.9 x 8.3)
Weight kg (lbs)
< 25 kg (55 lbs)
RF Connectors
7/16 DIN female
Optical Connectors
FC/APC
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
- 25°C to + 55°C
Ingression Protectioin
IP65/NEMA4
APPROVALS AND TESTS
Safety
UL, EN 60950, ETL
Radio
FCC Part 27
Environment
ETS 300 019
EMC
ETS 300 489-1
*Carrier Count
Power Per Carrier
Composite Power
Power Per Carrier ETSI
Composite Power ETSI
2
40dBm
43dBm
NA
NA
4
37dBm
43dBm
NA
NA
8
34dBm
43dBm
NA
NA
12
32dBm
43dBm
NA
NA
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
#Error
220
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Coverage Products
POWERWAVE
Nexus™ FT Rack Mounts
In-Building and Outdoor DAS Products
Commercial
Title
Frequency Band Frequency
(UL)
Band (DL)
Gain Adjustment
Range DL
Part Number
Nexus Dual Band
Repeaters
1850-1910,
824-849 MHz
1930-1990,
869-894 MHz
25 (45 - 70) dB
RH304022/03A
222
Nexus Dual Band
Repeaters
1850-1910,
806-824 MHz
1930-1990,
851-869 MHz
25 (45 - 70) dB
RH305022/03A
223
Nexus Dual Band
Repeaters
1850-1910,
896-902 MHz
1930-1990,
935-941 MHz
25 (45 - 70) dB
RH308022/03A
224
221
Page
Nexus FT Rack Mounts
POWERWAVE
RH304022/03A
Nexus Dual Band Repeaters
Nexus FT Rack Mount Dual Band 1900 / 850, Simplex SMA donor ports and duplexed N service ports per band.
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1850-1910, 824-849 MHz
Frequency Band DL
1930-1990, 869-894 MHz
Fiber Link Budget
n/a
Gain Adjustment Range DL
25 (45 - 70) dB
Gain Adjustment Range UL
25 (35 - 60) dB
Gain Step Resolution
1 dB
Output Power DL
20 W
Output Power DL 2
20 W
Instantaneous Bandwidth
60 / 25 MHz
Intermodulation 9KHz - 1 GHz
-13 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
-13 dBm
Alarm
LED/SNMP
Power Supply Options
110 - 230 VAC
Power Consumption
420 W typical, 500 W Max
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
266 x 483 x 551 (10.5 x 19 x 21.7)
Weight kg (lbs)
30 (66)
RF Connectors
SMA (Donor), N (Service)
Optical Connectors
n/a -units require ORD for optical to RF conversion
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
0C to +55C
Ingression Protection
IP50
APPROVALS AND TESTS
Safety
UL60950-1
Radio
FCC CFR47 Parts 22, 24
Environment
ETS 300 019
EMC
FCC CFR47 Part 22, 24
Carrier Count
Power Per Carrier
Composite Power
2
40 dBm
43 dBm
4
37 dBm
43 dBm
8
34 dBm
43 dBm
12
32 dBm
43 dBm
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-10
222
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Rack Mounts
POWERWAVE
RH305022/03A
Nexus Dual Band Repeaters
Nexus FT Rack Mount Dual Band 1900 / 800iPS, Simplex SMA donor ports and duplexed N service ports per band.
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1850-1910, 806-824 MHz
Frequency Band DL
1930-1990, 851-869 MHz
Fiber Link Budget
n/a
Gain Adjustment Range DL
25 (45 - 70) dB
Gain Adjustment Range UL
25 (35 - 60) dB
Gain Step Resolution
1 dB
Output Power DL
20 W
Output Power DL 2
20 W
Instantaneous Bandwidth
60 / 18 MHz
Intermodulation 9KHz - 1 GHz
-13 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
-13 dBm
Alarm
LED/SNMP
Power Supply Options
110 - 230 VAC
Power Consumption
420 W typical, 500 W Max
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
266 x 483 x 551 (10.5 x 19 x 21.7)
Weight kg (lbs)
30 (66)
RF Connectors
SMA (Donor), N (Service)
Optical Connectors
n/a -units require ORD for optical to RF conversion
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
0 to +55C
Ingression Protection
IP50
APPROVALS AND TESTS
Safety
UL60950-1
Radio
FCC CFR47 Parts 24, 90
Environment
ETS 300 019
EMC
FCC CFR47 Parts 24, 90
Carrier Count
Power Per Carrier
Composite Power
2
40 dBm
43 dBm
4
37 dBm
43 dBm
8
34 dBm
43 dBm
12
32 dBm
43 dBm
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-10
223
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Nexus FT Rack Mounts
POWERWAVE
RH308022/03A
Nexus Dual Band Repeaters
Nexus FT Rack Mount Dual Band 1900 / 900i, Simplex SMA donor ports and duplexed N service ports per band.
ELECTRICAL SPECIFICATIONS
Frequency Band UL
1850-1910, 896-902 MHz
Frequency Band DL
1930-1990, 935-941 MHz
Fiber Link Budget
n/a
Gain Adjustment Range DL
25 (45 - 70) dB
Gain Adjustment Range UL
25 (35 - 60) dB
Gain Step Resolution
1 dB
Output Power DL
20 W
Output Power DL 2
20 W
Instantaneous Bandwidth
60 / 6 MHz
Intermodulation 9KHz - 1 GHz
-13 dBm
Intermodulation 1 GHz - 12.75 GHz ETSI
-13 dBm
Alarm
LED/SNMP
Power Supply Options
110 - 230 VAC
Power Consumption
420 W typical, 500 W Max
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
266 x 483 x 551 (10.5 x 19 x 21.7)
Weight kg (lbs)
30 (66)
RF Connectors
SMA (Donor), N (Service)
Optical Connectors
n/a -units require ORD for optical to RF conversion
ENVIRONMENTAL SPECIFICATIONS
Temperature Range
0 to +55
Ingression Protection
IP50
APPROVALS AND TESTS
Safety
UL60950-1
Radio
FCC CFR47 Parts 24, 90
Environment
ETS 300 019
EMC
FCC CFR47 Parts 24, 90
Carrier Count
Power Per Carrier
Composite Power
2
40 dBm
43 dBm
4
37 dBm
43 dBm
8
34 dBm
43 dBm
12
32 dBm
43 dBm
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
Updated: 2010-11-10
224
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Power wave
Repeater Remote
Management
Powerwave’s IP/SNML/GPS (ISG) communication interface
module provides remote operation, control and monitoring
of Powerwave’s repeater networks reducing the need for
site visits through a very cost-effective and reliable IP
and SNMP connection. The ISG interface modules improve
the repeaters remote access offering Ethernet and packet
switched connections and a Web craft terminal. The ISG
interface can manage numerous repeaters and when
integrated with Powerwave’s NetWay™ Vision, offers a
complete solution for network management.
Coverage Products
POWERWAVE
Repeater Remote Management
IP/SNMP/GPS Repeater Remote Management Interface
Modem
Frequencies
GPS Receiver
Part
Number
N/A
UA107 62/1
227
IP/SNMP/GPS:
900/1800 Dual Mode +/- 6.5 VDC @ 2A
900 / 1800 MHz
Wireless GPRS
(supplied by repeater)
Packet Data Interface
12 channel L1 (1575.42
MHz), position accuracy UA107 62/2
~5m
228
IP/SNMP/GPS:
850/1900 Dual Mode +/- 6.5 VDC @ 2A
850 / 1900 MHz
Wireless CDMA
(supplied by repeater)
Packet Data Interface
12 channel L1 (1575.42
MHz), position accuracy UA107 62/3
~5m
229
IP/SNMP/GPS:
850/1900 Dual Mode +/- 6.5 VDC @ 2A
850 / 1900 MHz
Wireless GPRS
(supplied by repeater)
Packet Data Interface
12 channel L1 (1575.42
MHz), position accuracy UA107 62/4
~5m
230
Title
Power Output
IP/SNMP/GPS:
Ethernet Interface
Upgrade Option
+/- 6.5 VDC @ 2A
N/A
(supplied by repeater)
226
Page
Repeater Remote Management
POWERWAVE
UA107 62/1
IP/SNMP/GPS: Ethernet Interface Upgrade Option
Optional kit that provides wired Ethernet packet data interface for communication with Powerwave’s Netway Vision
(NWV)
ELECTRICAL SPECIFICATIONS
Power Input
+6.5 VDC @ 2A (supplied by Repeater)
Modem Frequencies
NA
GPS Receiver
NA
Battery Backup
10 minute minimum (for communications)
Battery Change Options
Continuous trickle or high charge
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)
Operating Range
-25° C to +55° C ( repeater ambient temps)
Repeater Interface
Use existing communication ports
Modem and GPS Interface
NA
Operational Conditions
ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)
Non-Operational Conditions
ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)
Certifications
EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15)
PROCESSING
Automated Location Based Tuning (via GPS)
Repeater Management
NA
Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with
the latest Repeater software version. For EOL Repeater models this management option also requires control
unit hardware upgrade. Contact Powerwave for more information.
COMMUNICATIONS
Packet Data Mode
IP Ethernet
Networks Supported
NA
Fallback Circuit Switched Mode
NA
Northbound Traffic
SNMP v1, v2c and http
Wireless Modem Type
NA
Network Management
Maintenance Access (Local Craft Port)
NWM 3.2.2 and greater; local web interface
10/100 BaseT Ethernet Port (DHCP managed) and RS232
,6*,QWHJUDWLRQ2SWLRQV6WDQGDUG5HSHDWHUV&RPSDFW5HSHDWHUV0DULWLPH5HSHDWHUV,Q7UDLQ5HSHDWHUVDQG2SWLFDO&RQYHUWHU0RGXOHV 2&0V $OOVSHFLILFDWLRQVVXEMHFWWRFKDQJHZLWKRXWQRWLFH3OHDVHFRQWDFW\RXU3RZHUZDYHUHSUHVHQWDWLYHIRUFRPSOHWHSHUIRUPDQFHGDWD
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-05-11
227
Repeater Remote Management
POWERWAVE
UA107 62/2
IP/SNMP/GPS: 900/1800 Dual Mode Wireless GPRS Packet Data
Interface
Optional kit that provides GPRS wireless packet data interface for communication with Powerwave’s NetWay Vision
(NWV) and automated location tuning via GPS for moving repeaters
ELECTRICAL SPECIFICATIONS
Power Input
+6.5 VDC @ 2A (supplied by Repeater)
Modem Frequencies
900 / 1800 MHz
GPS Receiver
12 channel L1 (1575.42 MHz), position accuracy ~ 5 m
Battery Backup
10 minute minimum (for communications)
Battery Change Options
Continuous trickle or high charge
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)
Operating Range
-25° C to +55° C ( repeater ambient temps)
Repeater Interface
Use existing communication and antenna ports
Modem and GPS Interface
Mezzanine Board
Operational Conditions
ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)
Non-Operational Conditions
ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)
Certifications
EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007)
PROCESSING
Automated Location Based Tuning (via GPS)
Repeater Management
Up to 12 Repeaters
Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with
the latest Repeater software version. For EOL Repeater models this management option also requires control
unit hardware upgrade. Contact Powerwave for more information.
COMMUNICATIONS
Packet Data Mode
GPRS and IP Ethernet
Networks Supported
NA
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Wireless Modem Type
Wavecom Quik series Extended (Q24 EX001)
Network Management
Maintenance Access (Local Craft Port)
NWM 3.2.2 and greater; local web interface
10/100 BaseT Ethernet Port (DHCP managed) and RS232
,6*,QWHJUDWLRQ2SWLRQV6WDQGDUG5HSHDWHUV&RPSDFW5HSHDWHUV0DULWLPH5HSHDWHUV,Q7UDLQ5HSHDWHUVDQG2SWLFDO&RQYHUWHU0RGXOHV 2&0V $OOVSHFLILFDWLRQVVXEMHFWWRFKDQJHZLWKRXWQRWLFH3OHDVHFRQWDFW\RXU3RZHUZDYHUHSUHVHQWDWLYHIRUFRPSOHWHSHUIRUPDQFHGDWD
Updated: 2010-05-11
228
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Repeater Remote Management
POWERWAVE
UA107 62/3
IP/SNMP/GPS: 850/1900 Dual Mode Wireless CDMA Packet Data
Interface
Optional kit that provides CDMA wireless packet data interface for communication with Powerwave’s NetWay Vision
(NWV)
ELECTRICAL SPECIFICATIONS
Power Input
+6.5 VDC @ 2A (supplied by Repeater)
Modem Frequencies
850 / 1900 MHz
GPS Receiver
12 channel L1 (1575.42 MHz), position accuracy ~ 5 m
Battery Backup
10 minute minimum (for communications)
Battery Change Options
Continuous trickle or high charge
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)
Operating Range
-25° C to +55° C ( repeater ambient temps)
Repeater Interface
Use existing communication and antenna ports
Modem and GPS Interface
Mezzanine Board
Operational Conditions
ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)
Non-Operational Conditions
ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)
Certifications
EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15)
PROCESSING
Automated Location Based Tuning (via GPS)
Repeater Management
Up to 12 Repeaters
Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with
the latest Repeater software version. For EOL Repeater models this management option also requires control
unit hardware upgrade. Contact Powerwave for more information.
COMMUNICATIONS
Packet Data Mode
CDMA2000 1XRTT and IP ethernet
Networks Supported
Verizon
Fallback Circuit Switched Mode
NA
Northbound Traffic
SNMP v1, v2c and http
Wireless Modem Type
Wavecom Quik series (Q2438)
Network Management
Maintenance Access (Local Craft Port)
NWM 3.2.2 and greater; local web interface
10/100 BaseT Ethernet Port (DHCP managed) and RS232
,6*,QWHJUDWLRQ2SWLRQV6WDQGDUG5HSHDWHUV&RPSDFW5HSHDWHUV0DULWLPH5HSHDWHUV,Q7UDLQ5HSHDWHUVDQG2SWLFDO&RQYHUWHU0RGXOHV 2&0V $OOVSHFLILFDWLRQVVXEMHFWWRFKDQJHZLWKRXWQRWLFH3OHDVHFRQWDFW\RXU3RZHUZDYHUHSUHVHQWDWLYHIRUFRPSOHWHSHUIRUPDQFHGDWD
Updated: 2010-05-11
229
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Repeater Remote Management
POWERWAVE
UA107 62/4
IP/SNMP/GPS: 850/1900 Dual Mode Wireless GPRS Packet Data
Interface
Optional kit that provides GPRS wireless packet data interface for communication with Powerwave’s Netway Vision
(NWV)
ELECTRICAL SPECIFICATIONS
Power Input
+6.5 VDC @ 2A (supplied by Repeater)
Modem Frequencies
850 / 1900 MHz
GPS Receiver
12 channel L1 (1575.42 MHz), position accuracy ~ 5 m
Battery Backup
10 minute minimum (for communications)
Battery Change Options
Continuous trickle or high charge
MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)
35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)
Operating Range
-25° C to +55° C ( repeater ambient temps)
Repeater Interface
Use existing communication and antenna ports
Modem and GPS Interface
Mezzanine Board
Operational Conditions
ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)
Non-Operational Conditions
ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)
Certifications
EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15)
PROCESSING
Automated Location Based Tuning (via GPS)
Repeater Management
Up to 12 Repeaters
Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade with
the latest Repeater software version. For EOL Repeater models this management option also requires control
unit hardware upgrade. Contact Powerwave for more information.
COMMUNICATIONS
Packet Data Mode
GPRS and IP Ethernet
Networks Supported
NA
Fallback Circuit Switched Mode
GSM
Northbound Traffic
SNMP v1, v2c and http
Wireless Modem Type
Wavecom Quik series Extended (Q24 EX001)
Network Management
Maintenance Access (Local Craft Port)
NWM 3.2.2 and greater; local web interface
10/100 BaseT Ethernet Port (DHCP managed) and RS232
,6*,QWHJUDWLRQ2SWLRQV6WDQGDUG5HSHDWHUV&RPSDFW5HSHDWHUV0DULWLPH5HSHDWHUV,Q7UDLQ5HSHDWHUVDQG2SWLFDO&RQYHUWHU0RGXOHV 2&0V $OOVSHFLILFDWLRQVVXEMHFWWRFKDQJHZLWKRXWQRWLFH3OHDVHFRQWDFW\RXU3RZHUZDYHUHSUHVHQWDWLYHIRUFRPSOHWHSHUIRUPDQFHGDWD
Updated: 2010-05-11
230
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Power wave
Antenna Products
A Tradition of Quality Since 1946
Broadband
Powerwave delivers antennas to customers around the
world, offering solutions for all mobile telephony standards.
Our designers and engineers build on years of experience;
we have developed and manufactured top-quality antennas
since 1946 from our core platform formerly under the
industry leading Allgon brand name.
Single and Dual Band
State of the Art Antennas are the Key
to Reducing Total Cost of Ownership
The Powerwave broadband multiband antennas offer
network operators fast and successful roll-out of next
generation networks with excellent RF-performance.
Our antennas are designed to overcome 3G deployment
challenges, such as space and installation issues as well
as various co-siting scenarios. The Powerwave broadband
antenna technology simplifies logistics for network
operators active in multiple markets.
iRET
iDiplexer
Remote Electrical Tilt (RET)
Indoor
Clean Site™ Solutions
Mounting Solutions
Antenna Products
Antenna Products
Powerwave Technologies, Inc.
A Tradition of Quality Since 1946
Powerwave delivers antennas to customers around the world, offering solutions for all mobile
telephony standards. Our designers and engineers build on years of experience; we have developed
and manufactured top-quality antennas since 1946 from our core platform; formerly under the industry
leading Allgon brand name.
State of the Art Antennas are the Key to Reducing Total Cost of Ownership
The Powerwave broadband multiband antennas offer network operators fast and successful roll-out of
next generation networks with excellent RF-performance. Our antennas are designed to overcome 3G
deployment challenges, such as space and installation issues as well as various co-siting scenarios.
The Powerwave broadband antenna technology simplifies logistics for network operators active in
multiple markets.
Antenna Products
Broadband Antennas
The Powerwave broadband antenna design is based on a patented stacked aperture-coupled patch
technology, which provides high isolation performance and a wide voltage standing wave ratio
(VSWR) bandwidth. The antennas have superior radiation patterns due to a unique reflector design
that provide a very small variation of the -3dB horizontal beam width over the frequency band as well
as a high front-to-back ratio. Powerwave broadband antennas come with manually adjustable
electrical tilt (MET) for tuning flexibility of tilt angles. This design ensures the highest possible crosspolar discrimination value.
Single Band Antennas
The Powerwave single band antenna’s outstanding performance in the field derives from excellent
VSWR, isolation, beam squint and tracking. This design ensures minimized intermodulation issues,
thus substantially enhancing system benefits. The Powerwave polarization diversity systems use one
antenna with two orthogonal polarizations slanted at ±45° to provide the independently fading signals
needed for achieving top-quality coverage. As a result of thorough, in-depth research and testing,
Powerwave has produced a variety of designs that ensure the isolation, cross polarization
discrimination and orthogonality between inputs needed to achieve the highest possible diversity gain,
hence the most efficient system performance.
Dual Band Antennas
The Powerwave dual band, broadband antennas are available in a variety of designs combining a low
broadband with a high broadband or a high broadband with another high broadband. The Powerwave
dual band antennas are built on patented and well proven aperture-coupled patch technology and are
available both as vertical polarized as well as cross polarized.
Easy-to-install dual band antennas from Powerwave are deployed in numerous, wireless networks
worldwide. All have endured extensive field trials in close collaboration with cell planners and other
communications providers to ensure Powerwave dual band antennas perform to expectations.
232
4
Antenna Products
Antenna Products
Powerwave Technologies, Inc.
iRET Antennas
The iRET antenna family is the next iteration of Powerwave's innovative antenna product line, which
integrates remote electrical tilt functionality under the antenna radome, delivering maximized
functionality and improved aesthetics, while eliminating installation and reliability issues that can occur
with typical exterior RET modules.
iDiplexer
iDiplexer antennas combine the performance of Powerwave’s high performing multiband antenna line
and external diplexer into one product. iDiplexed antennas offer a reduced amount of connectors and
feeder lines to customers who are limited in adding additional feeders due to wind load and space
limitation on towers. Customers can rapidly deploy an additional overlay network by just exchanging
the existing antennas with iDiplexed antennas and reusing the existing feeders. iDiplexed antennas
usually combine the low band and high band frequencies into a single pair of connectors, still keeping
the independent variable down tilt capability.
Remote Electrical Tilt Antennas (RET)
The Powerwave remote electrical tilt (RET) system is designed to meet the high requirements for
reliability, flexibility and efficiency in remote control of tower-mounted telecommunication equipment.
The system consists of a master control unit (MCU) that controls the antenna line devices (ALDs) and
supplies DC power to them via a common bus. ALDs are connected to the MCU using a separate
ALD system cable or by using the existing RF feeders in your system.
Indoor Antennas
The indoor antenna is designed to blend into a wall or ceiling inside a building and is the base
antenna for the Powerwave distributed antenna system. The indoor antenna covers all bands from
800 MHz up to 2500 MHz and supports multiband operation. Easy-to-install dual band antennas from
Powerwave are deployed in numerous wireless networks worldwide. Using fewer antennas of
discreetly functional design is an improvement over using numerous antennas of unsightly size and
appearance, especially with today's aesthetic concerns.
Clean Site Solutions
Clean Site solutions minimize the visual impact of a complete antenna system and significantly
reduces investment and operational costs for network operators when building new or upgrading
existing networks. Building permits for existing antenna installations can be used when replacing old,
passive antennas with the Clean Site solution. This simplifies the site acquisition process significantly
and shortens roll-out time considerably.
All Clean Site antennas support remote electrical tilt for optimization of the coverage footprint and
tuning of network performance. By integrating all functionality into one single unit, Clean Site offers
you a flexible and attractive solution in the most cost efficient way.
Mounting Solutions
Our mounting solutions consist of rugged brackets with an aesthetic design and the flexibility to
address multiple situations and requirements. All Powerwave antennas are delivered with mounting
brackets pre-mounted. The intent is to reduce logistic and tower crew installation costs for our
customers. All brackets have a high quality surface treatment to maintain the Powerwave standard for
product exposure to severe environments. By using steel in the sheet metal parts of the tilt brackets, a
robust and rigid design is ensured.
233
5
Power wave
Broadband Antennas
The Powerwave broadband antenna design is based on
a patented stacked aperture-coupled patch technology,
which provides high isolation performance and a wide
voltage standing wave ratio (VSWR) bandwidth. The
antennas have superior radiation patterns due to a unique
reflector design that provide a very small variation of the
-3dB horizontal beam width over the frequency band as
well as a high front-to-back ratio. Powerwave broadband
antennas come with manually adjustable electrical tilt (MET)
for tuning flexibility of tilt angles. This design ensures the
highest possible cross-polar discrimination value.
Broadband Antennas
POWERWAVE
Broadband Antennas
Single Broadband Antennas
Cross Polarized
Page
High Broadband Cross Polarized Antennas, 1710-2170 MHz
236
Low Broadband Cross Polarized Antennas, 806-960 MHz
257
Low Broadband Cross Polarized Antennas, 698-894 MHz
289
Vertical Polarized
Page
ALP Broadband Cross Polarized Antennas, 806-960 MHz
297
Dual Broadband Antennas
Cross Polarized
Page
Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz
299
Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz
307
Triple Broadband Antennas
Cross Polarized
Page
Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz
235
318
Single Broadband Antennas
POWERWAVE
High Broadband Cross Polarized Antennas, 1710-2170 MHz
Single Broadband Antennas
Cross Polarized
High Broadband Cross Polarized Antennas, 1710-2170 MHz
Horizontal Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
65
18.1/16
2°
1.3m (4'3")
5701.02
237
65
18.3/16.2
0-8°
1.3m (4'3")
5721.00
238
65
18.1/16
2-10°
1.3m (4'3")
5721.02
239
65
19.5/17.4
0-5.5°
2.0m (6'6")
5722.00
240
65
15.8/13.7
FET
0.7m (2’3”)
7700.06
241
65
18.1/16
FET
1.3m (4'3")
7701.02
242
65
18.1/16
FET
1.3m (4'3")
7701.06
243
65
18.1/16
FET
1.3m (4'3")
7721.02
244
65
18/15.9
MET
1.3m (4'3")
7721.06
245
65
18.1/16
FET
1.3m (4'3")
7721.10
246
65
18.1/16
FET
1.3m (4'3")
7701.00
247
65
18.3/16.2
MET
1.3m (4'3")
7721.00
248
65
18.3/16.2
MET
1.3m (4'3")
7721.40
249
65
18/15.9
FET
1.3m (4'3")
7701.1ST.0000.01
250
65
19.5/17.4
MET
2.0m (6'6")
7722.00
251
90
14.1/12
MET
0.7m (2'3")
7735.00A
252
90
15.6/13.5
MET
0.7m (2'3")
7720.00
253
90
15.8/13.7
FET
0.7m (2'3")
7700.00
254
90
16.7/14.6
MET
1.3m (4'3")
7740.00A
255
90
17.9/15.8
MET
2.0m (6'6")
7745.00A
256
236
Page
POWERWAVE
5701.02
Single Broadband Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.1/16
TILT: 2°
LENGTH: 1.3m (4’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.4/15.3
17.8/15.7
18.1/16
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
64
Vertical beam width, -3 dB (°)
7.2
6.7
6.4
Side lobe suppression, vertical 1st upper (dB)
>19
>19
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-22,typical>-18
Electrical down tilt (°)
2
First null fill (dB)
>19
>-22,typical>-18
>-22,typical>-18
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>26
>26
>26
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>17
>14
>11
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-150
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1309x167x89.5 (4’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
7.7 (16.9)
Weight, without brackets, kg (lbs)
4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1480x200x200 (4’10”x8”x8”)
Shipping weight, kg (lbs)
11.5 (25.3)
RET
-
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-10-21
237
POWERWAVE
Single Broadband Antennas
5721.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.3/16.2
TILT: 0-8°
LENGTH: 1.3m (4’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.6/15.5
18.0/15.9
18.3/16.2
Polarization
Dual Linear ± 45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
64
Vertical beam width, -3 dB (°)
7.0
6.6
6.3
>18,18,16,16,14 @ 0,2,4,6,8°
>18,18,16,16,14 @ 0,2,4,6,8°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-24 typical >-18
Electrical down tilt (°)
0-8
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
>18,18,16,16,14 @ 0,2,4,6,8°
>-24 typical >-18
>-24 typical >-18
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>18
>14
>12
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1309x167x89.5(4’3”x6”x3”)
Mounting
Pre Mounted Standard Brackets
Weight, with brackets, kg (lbs)
9.7 (21.3)
Weight, without brackets, kg (lbs)
6.0 (13.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC Grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1480x200x200 (4’10”x8”x8”)
Shipping weight, kg (lbs)
13.5 (29.7)
RET
8110.10, 8110.40
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Mar 19 2010
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-06-04
238
POWERWAVE
5721.02
Single Broadband Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.1/16.0
TILT: 2-10°
LENGTH: 1.3m (4’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.5/15.4
17.9/15.8
18.1/16.0
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
64
Vertical beam width, -3 dB (°)
7.0
6.6
6.3
>19,19,18,17,16@2,4,6,8,10°
>20,20,19,19,18@2,4,6,8,10°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-24,typical>-18
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
2-10
First null fill (dB)
>20,20,19,19,18@2,4,6,8,10°
>-24,typical>-18
>-24,typical>-18
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>18
>14
>12
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1309x167x89.5 (4’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
9.7 (21.3)
Weight, without brackets, kg (lbs)
6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1480x200x200 (4’10”x8”x8”)
Shipping weight, kg (lbs)
13.5 (29.7)
RET
8110.10, 8110.40
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-06-04
239
POWERWAVE
5722.00
Single Broadband Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 19.5/17.4
TILT: 0-5.5°
LENGTH: 2.0m (6’6”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
19/16.9
19.2/17.1
19.5/17.4
Polarization
Dual Slant ± 45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
65
Vertical beam width, -3 dB (°)
4.7
4.4
4.2
>18,18,18,16,16,14@0,1,2,3,4,5°
>18,18,18,16,16,14@0,1,2,3,4,5°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-20,typical>-16
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
0 - 5.5
First null fill (dB)
>18,18,18,16,16,14@0,1,2,3,4,5°
>-20,typical>-16
>-20,typical>-16
Vertical beam squint (°)
0.4
0.4
0.4
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>19
>19
>21
Cross polar discrimination (XPD) ±60° (dB)
>20
>17
>12
-
-
-
<-153
<-153
Far field coupling
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1934x167x89.5 (6’4”x6”x3”)
Mounting
Pre mounted standard brackets
Weight, with brackets, kg (lbs)
14 (31)
Weight, without brackets, kg (lbs)
8.5 (18.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
416
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC Grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2105x200x200 (6’11”x8”x8”)
Shipping weight, kg (lbs)
15.5 (34.1)
RET
8110.10, 8110.40
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-07-06
240
POWERWAVE
Single Broadband Antennas
7700.06
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.8/13.7
TILT: 6°
LENGTH: 0.7m (2’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
15.0/12.9
15.5/13.4
15.8/13.7
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
65
64
14.7
13.8
12.8
Side lobe suppression, vertical 1st upper (dB)
>17
>17
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-26,typical>-20
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
6
First null fill (dB)
>17
>-26,typical>-20
>-26,typical>-20
Vertical beam squint (°)
0.6
0.6
0.6
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>26
>26
>26
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>19
Cross polar discrimination (XPD) ±60° (dB)
>17
>15
>11
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
709x167x89.5 (2’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
6.7 (14.8)
Weight, without brackets, kg (lbs)
3 (6.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
133
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
880x200x200 (2’11”x 8”x 8”)
Shipping weight, kg (lbs)
10 (22)
RET
-
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
PN7700.06
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-10-22
241
POWERWAVE
Single Broadband Antennas
7701.02
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.1/16
TILT: 2°
LENGTH: 1.3m (4’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.4/15.3
17.8/15.7
18.1/16
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
64
Vertical beam width, -3 dB (°)
7.2
6.7
6.4
Side lobe suppression, vertical 1st upper (dB)
>19
>19
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-22,typical>-18
Electrical down tilt (°)
2
First null fill (dB)
>19
>-22,typical>-18
>-22,typical>-18
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>26
>26
>26
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>17
>14
>11
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1309x167x89.5 (4’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
7.7 (16.9)
Weight, without brackets, kg (lbs)
4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1480x200x200 (4’10”x8”x8”)
Shipping weight, kg (lbs)
11.5 (25.3)
RET
-
Brackets
7456.00A,7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08192 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-02
242
POWERWAVE
Single Broadband Antennas
7701.06
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.1/16.0
TILT: 6°
LENGTH: 1.3m (4’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.5/15.4
17.8/15.7
18.1/16.0
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
65
64
Vertical beam width, -3 dB (°)
7.2
6.7
6.4
Side lobe suppression, vertical 1st upper (dB)
>18
>18
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-26,typical>-20
Electrical down tilt (°)
6
First null fill (dB)
>18
>-26,typical>-20
>-26,typical>-20
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>29
>29
>29
Front to back ratio (dB) 180°±30° total power
>25
>25
>25
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>17
>14
>11
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1309x167x89.5 (4’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
7.7 (16.9)
Weight, without brackets, kg (lbs)
4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1480x200x200 (4’10”x8”x8”)
Shipping weight, kg (lbs)
11.5 (25.3)
RET
-
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08193 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-10-22
243
POWERWAVE
7721.02
Single Broadband Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.1/16.0
TILT: 2-10°
LENGTH: 1.3m (4’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.5/15.4
17.9/15.8
18.1/16.0
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
64
Vertical beam width, -3 dB (°)
7.0
6.6
6.3
>19,19,18,17,16@2,4,6,8,10°
>20,20,19,19,18@2,4,6,8,10°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-24,typical>-18
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
2-10
First null fill (dB)
>20,20,19,19,18@2,4,6,8,10°
>-24,typical>-18
>-24,typical>-18
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>18
>14
>12
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1309x167x89.5 (4’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
9.7 (21.3)
Weight, without brackets, kg (lbs)
6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1480x200x200 (4’10”x8”x8”)
Shipping weight, kg (lbs)
13.5 (29.7)
RET
8110.10, 8110.40
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-05-28
244
POWERWAVE
Single Broadband Antennas
7721.06
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.0/15.9
TILT: 6-14°
LENGTH: 1.3m (4’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.5/15.4
17.8/15.7
18.0/15.9
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
64
Vertical beam width, -3 dB (°)
7.3
6.9
6.6
>19,19,18,17,16@6,8,10,12,14°
>20,20,20,19,18@6,8,10,12,14°
>20,20,20,19,18@6,8,10,12,14°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<2
<2
<2
>-24,typical>-18
>-24,typical>-18
>-24,typical>-18
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
6-14
First null fill (dB)
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>18
>14
>12
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1309x167x89.5 (4’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
9.7 (21.3)
Weight, without brackets, kg (lbs)
6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1480x200x200 (4’10”x8”x8”)
Shipping weight, kg (lbs)
13.5 (29.7)
RET
8110.40, 8110.10
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08196 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-09
245
POWERWAVE
Single Broadband Antennas
7721.10
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.1/16.0
TILT: 2-10°
LENGTH: 1.3m (4’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.5/15.4
17.9/15.8
18.1/16.0
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
64
Vertical beam width, -3 dB (°)
7.0
6.6
6.3
>19,19,18,17,16@2,4,6,8,10°
>20,20,19,19,18@2,4,6,8,10°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-24,typical>-18
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
2-10
First null fill (dB)
>20,20,19,19,18@2,4,6,8,10°
>-24,typical>-18
>-24,typical>-18
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>18
>14
>12
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1309x167x89.5 (4’3”x6”x3”)
Mounting
No pre-mounted bracket.
Weight, with brackets, kg (lbs)
9.7 (21.3)
Weight, without brackets, kg (lbs)
6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1480x200x200 (4’10”x8”x8”)
Shipping weight, kg (lbs)
13.5 (29.7)
RET
8110.40, 8110.10
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08196 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-09
246
POWERWAVE
Single Broadband Antennas
7701.00
POLARIZATION: X-pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.2/16.1
TILT: 0°
LENGTH: 1.3m (4’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.5/15.4
17.9/15.8
18.2/16.1
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
64
Vertical beam width, -3 dB (°)
7.2
6.7
6.4
Side lobe suppression, vertical 1st upper (dB)
>20
>20
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-20,typical>-18
Electrical down tilt (°)
0
First null fill (dB)
>20
>-20,typical>-18
>-20,typical>-18
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>17
>14
>11
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1309x167x89.5 (4’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
7.7 (16.9)
Weight, without brackets, kg (lbs)
4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1480x200x200 (4’10”x8”x8”)
Shipping weight, kg (lbs)
11.5 (25.3)
RET
-
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08191 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-10-22
247
POWERWAVE
Single Broadband Antennas
7721.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.3/16.2
TILT: 0-8°
LENGTH: 1.3m (4’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.6/15.5
18.0/15.9
18.3/16.2
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
64
Vertical beam width, -3 dB (°)
7.0
6.6
6.3
>18,18,16,16,14,@0,2,4,6,8°
>18,18,16,16,14,@0,2,4,6,8°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-24,typical>-18
Electrical down tilt (°)
0-8
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
>18,18,16,16,14,@0,2,4,6,8°
>-24,typical>-18
>-24,typical>-18
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>18
>14
>12
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1309x167x89.5 (4’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
9.7 (21.3)
Weight, without brackets, kg (lbs)
6.0 (13.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1480x200x200 (4’10”x8”x8”)
Shipping weight, kg (lbs)
13.5 (29.7)
RET
8110.40, 8110.10
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Mar 19 2010
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-09
248
POWERWAVE
7721.40
Single Broadband Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.3/16.2
TILT: 0-8°
LENGTH: 1.3m (4’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.6/15.5
18.0/15.9
18.3/16.2
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
64
Vertical beam width, -3 dB (°)
7.0
6.6
6.3
>18,18,16,16,14 @ 0,2,4,6,8º
>18,18,16,16,14 @ 0,2,4,6,8º
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-24,typical>-18
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
0-8
First null fill (dB)
>18,18,16,16,14 @ 0,2,4,6,8º
>-24,typical>-18
>-24,typical>-18
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>18
>14
>12
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
This is the connectur up version of 7721.00
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Top
Dimensions, HxWxD, mm (ft)
1309x167x89.5 mm (4’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
9.7 (21.3)
Weight, without brackets, kg (lbs)
6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light grey
Package size, HxWxD, mm (ft)
1480x200x200 (4’10”x8”x8”)
Shipping weight, kg (lbs)
13.5 (29.7)
RET
7010.00, 7011.00, 7012.00
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-09
249
POWERWAVE
7701.1ST.0000.01
Single Broadband Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18/15.9
TILT: FET
LENGTH: 1.3m (4’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
1710-1880
Gain (dBi/dBd)
1850-1990
17.0/14.9
1920-2170
18/15.9
Polarization
Dual Slant +/- 45
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.4:1
Horizontal beam width, -3 dB (°)
67
66
65
Vertical beam width, -3 dB (°)
7.2
6.7
6.4
Electrical down tilt (°)
2
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
>30
Tracking, horizontal plane ±60° (dB)
<1.0
First null fill (dB)
>13
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>30
Front to back ratio (dB) 180°±30° total power
>30
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>17
>14
>11
<-150
<-150
<-150
Far field coupling
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
350
Power handling, average total (W)
700
MECHANICAL SPECIFICATIONS*
Connector
7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1309x167x89.5
Mounting
Weight, with brackets, kg (lbs)
10.1
Weight, without brackets, kg (lbs)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
Survival wind speed, m/s (mph)
70
Lightning protection
DC Grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1480x200x200
Shipping weight, kg (lbs)
11
RET
Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-10-22
250
POWERWAVE
Single Broadband Antennas
7722.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 19.5/17.4
TILT: 0-5.5°
LENGTH: 2.0m (6’6”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
19.0/16.9
19.2/17.1
19.5/17.4
Polarization
Dual slant ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
65
Vertical beam width, -3 dB (°)
4.7
4.4
4.2
>18,18,18,16,16,14,@0,1,2,3,4,5°
>18,18,18,16,16,14,@0,1,2,3,4,5°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-20,typical>-16
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
0-5.5
First null fill (dB)
>18,18,18,16,16,14,@0,1,2,3,4,5°
>-20,typical>-16
>-20,typical>-16
Vertical beam squint (°)
0.4
0.4
0.4
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>19
>19
>21
Cross polar discrimination (XPD) ±60° (dB)
>20
>17
>12
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1934x167x89.5 (6’4”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
14 (31)
Weight, without brackets, kg (lbs)
8.5 (18.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
416
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2105x200x200 (6’11”x8”x8”)
Shipping weight, kg (lbs)
15.5 (34.1)
RET
7010.00, 7011.00, 7012.00
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08197 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-09
251
POWERWAVE
Single Broadband Antennas
7735.00A
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 14.1/12.0
TILT: 0-16°
LENGTH: 0.7m (2’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
13.6/11.5
13.8/11.7
14.1/12.0
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
86
86
87
14.7
13.4
12.2
>18,17,16,15,14@0,4,8,12,16°
>18,17,16,15,14@0,4,8,12,16°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-24,typical>-18
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
0-16
First null fill (dB)
>18,17,16,15,14@0,4,8,12,16°
>-24,typical>-18
>-24,typical>-18
Vertical beam squint (°)
0.8
0.8
0.8
Front to back ratio (dB) 180°±30° copolar
>25
>25
>25
Front to back ratio (dB) 180°±30° total power
>23
>23
>23
Cross polar discrimination (XPD) 0° (dB)
>13
>13
>12
Cross polar discrimination (XPD) ±60° (dB)
>10
>10
>10
-
-
-
IM3, 2xTx@43dBm (dBc)
-153
-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
709x167x89.5 (2’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
9.7 (21.3)
Weight, without brackets, kg (lbs)
6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
133
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
880x200x200 (2’11”x8”x8”)
Shipping weight, kg (lbs)
13 (28.6)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08198 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-06-30
252
POWERWAVE
Single Broadband Antennas
7720.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.6/13.5
TILT: 0-16°
LENGTH: 0.7m (2’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
15.0/12.9
15.1/13.0
15.6/13.5
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
65
64
14.1
13.5
12.5
>17,16,16,15,15@0,4,8,12,16°
>17,16,16,15,15@0,4,8,12,16°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.5
<1.5
<1.5
>-29,typical>-25
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
0-16
First null fill (dB)
>17,16,16,15,15@0,4,8,12,16°
>-29,typical>-25
>-29,typical>-25
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
>25
Cross polar discrimination (XPD) 0° (dB)
>15
>15
>18
Cross polar discrimination (XPD) ±60° (dB)
>15
>15
>13
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
709x167x89.5 (2’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
8.2 (18)
Weight, without brackets, kg (lbs)
4.5 (9.9)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
133
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
880x200x200 (2’11”x8”x8”)
Shipping weight, kg (lbs)
11.5 (25.3)
RET
8110.40, 8110.10
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08194 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-09
253
POWERWAVE
Single Broadband Antennas
7700.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.8/13.7
TILT: 0°
LENGTH: 0.7m (2’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
15.1/13.0
15.5/13.4
15.8/13.7
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
64
14.7
13.8
12.8
Side lobe suppression, vertical 1st upper (dB)
>19
>19
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-20,typical>-18
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
0
First null fill (dB)
>19
>-20,typical>-18
>-20,typical>-18
Vertical beam squint (°)
0.6
0.6
0.6
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>26
>26
>26
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>19
Cross polar discrimination (XPD) ±60° (dB)
>17
>15
>11
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
709x167x89.5 (2’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
6.7 (14.8)
Weight, without brackets, kg (lbs)
3 (6.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
133
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
880x200x200 (2’11”x 8”x 8”)
Shipping weight, kg (lbs)
10 (22)
RET
-
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08189 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-10-22
254
POWERWAVE
Single Broadband Antennas
7740.00A
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 16.7/14.6
TILT: 0-8°
LENGTH: 1.3m (4’3”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
16.2/14.1
16.4/14.3
16.7/14.6
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
86
86
86
Vertical beam width, -3 dB (°)
7.1
6.6
6.3
>18,17,15,15,14@0,2,4,6,8°
>18,17,15,15,14@0,2,4,6,8°
30
30
30
<1.0
<1.0
<1.0
>-24,typical>-18
Electrical down tilt (°)
0-8
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Tracking, horizontal plane ±60° (dB)
First null fill (dB)
>18,17,15,15,14@0,2,4,6,8°
>-24,typical>-18
>-24,typical>-18
Vertical beam squint (°)
0.4
0.4
0.4
Front to back ratio (dB) 180°±30° copolar
>29
>29
>29
Front to back ratio (dB) 180°±30° total power
>23
>23
>23
Cross polar discrimination (XPD) 0° (dB)
>14
>14
>12
Cross polar discrimination (XPD) ±60° (dB)
>10
>10
>10
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1309x167x89.5 (4’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
11.7 (25.7)
Weight, without brackets, kg (lbs)
8 (17.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1480x200x200 (4’10”x8”x8”)
Shipping weight, kg (lbs)
15.5 (34.1)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / May 07 2010
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-06-30
255
POWERWAVE
Single Broadband Antennas
7745.00A
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 17.9/15.8
TILT: 0-5.5°
LENGTH: 2.0m (6’6”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.5/15.4
17.6/15.5
17.9/15.8
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
86
86
86
Vertical beam width, -3 dB (°)
4.7
4.5
4.2
>18,18,16,16,14,14,@0,1,2,3,4,5°
>18,18,16,16,14,14,@0,1,2,3,4,5°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-24,typical>-18
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
0-5.5
First null fill (dB)
>18,18,16,16,14,14,@0,1,2,3,4,5°
>-24,typical>-18
>-24,typical>-18
Vertical beam squint (°)
0.3
0.3
0.3
Front to back ratio (dB) 180°±30° copolar
>29
>29
>29
Front to back ratio (dB) 180°±30° total power
>23
>23
>23
Cross polar discrimination (XPD) 0° (dB)
>14
>14
>12
Cross polar discrimination (XPD) ±60° (dB)
>10
>10
>10
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1934x167x89.5 (6’4”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
15.9 (35)
Weight, without brackets, kg (lbs)
10.4 (22.9)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
416
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2105x200x200 (6’11”x8”x8”)
Shipping weight, kg (lbs)
18 (39.6)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08200 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-06-30
256
Single Broadband Antennas
POWERWAVE
Low Broadband Cross Polarized Antennas, 806-960 MHz
Single Broadband Antennas
Cross Polarized
Low Broadband Cross Polarized Antennas, 806-960 MHz
Horizontal Beamwidth Gain dBi dBd
Tilt
Length
Part Number
65
14.6/12.5, 15/12.9
2-12°
1.3m (4'3")
5471.00
259
65
17.1/15.0, 17.5/15.4
0-7.5°
2.0m (6'6")
5472.00
260
65
17.7/15.6, 18.5/46.4
0-0.5°
2.6m (8'6")
5473.00
261
65
16.5/14.4, 17.0/14.9
0°
2.0m (6'6")
5477.00
262
65
17.4/15.3, 18.1/16.0
0°
2.6m (8'6")
5478.00
263
65
17.4/15.2, 18.0/15.8
6°
2.6m (8'6")
5478.06
264
90
16.6/14.5, 17.0/14.9
0-0.5°
2.6m (8'6")
5483.00
265
90
16.6/14.5, 17.1/15.0
0°
2.6m (8'6")
5488.00
266
65
14.6/12.5, 15.1/13
FET
1.3m (4'3")
7476.06
267
65
14.6/12.5, 15/12.9
MET
1.3m (4'3")
7471.00
268
65
15.6/13.5, 16.2/14.1
FET
2.0m (6'6")
7477.00
269
65
15.8/13.7, 16.3/14.2
FET
2.0m (6'6")
7477.02
270
65
16.9/14.8, 17.3/15.2
FET
2.0m (6'6")
7478.00
271
65
16/13.9, 16.5/14.4
MET
2.0m (6'6")
7472.00
272
65
16/13.9, 16.5/14.4
FET
2.0m (6'6")
7477.06
273
65
17/14.9, 17.4/15.3
FET
2.6m (8'6")
7478.02
274
65
17/14.9, 17.4/15.3
FET
2.6m (8'6")
7478.06
275
66
17.2/15.1, 17.5/15.4
MET
2.6m (8'6")
7473.00
276
90
13.5/11.4, 14/11.9
MET
1.3m (4'3")
7481.00
277
90
13.5/11.4, 14/11.9
FET
1.4m (4'7")
7486.00
278
90
13.6/11.5, 14.1/12
FET
1.4m (4'7")
7486.02
279
90
13.6/11.5, 14/11.9
FET
1.4m (4'7")
7486.06
280
90
14.8/12.7, 15.4/13.3
FET
2.0m (6'6")
7487.00
281
90
14.8/12.7, 15.5/13.4
MET
2.0m (6'6")
7482.00
282
90
15.8/13.7, 16.3/14.2
FET
2.6m (8'6")
7488.00
283
90
15.8/13.7, 16.3/14.2
FET
2.6m (8'6")
7488.02
284
90
15.9/13.8, 16.3/14.2
MET
2.6m (8'6")
7483.00
285
257
Page
Single Broadband Antennas
POWERWAVE
Low Broadband Cross Polarized Antennas, 806-960 MHz
Single Broadband Antennas
Cross Polarized
Low Broadband Cross Polarized Antennas, 806-960 MHz
Horizontal Beamwidth Gain dBi dBd
Tilt
Length
Part Number
90
15.9/13.8, 16.4/14.3
FET
2.6m (8'6")
7488.06
286
90
15/12.9, 15.5/13.4
FET
2.0m (6'6")
7487.02
287
90
15/12.9, 15.5/13.4
FET
2.0m (6'6")
7487.06
288
258
Page
POWERWAVE
5471.00
Single Broadband Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.6/12.5, 15.0/12.9
TILT: 2-12°
LENGTH: 1.3m (4’3”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
870-960
Gain (dBi/dBd)
14.6/12.5
15.0/12.9
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.5:1
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
65
65
15.3
14.2
Electrical down tilt (°)
2 - 12
Side lobe suppression, vertical 1st upper (dB)
>19,18,17@2,7,12°
Isolation between inputs (dB)
>19,18,17@2,7,12°
30
30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
>-25
>-25
Vertical beam squint (°)
1
1
Front to back ratio (dB) 180°±30° copolar
>25
>25
Front to back ratio (dB) 180°±30° total power
>24
>25
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
-
>10
>10
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1270x280x125 (4’2”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
14.5 (31.9)
Weight, without brackets, kg (lbs)
9 (19.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
367
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1475x355x255 (4’10”x1’2”x10”)
Shipping weight, kg (lbs)
18.5 (40.7)
RET
8110.10, 8110.40
Brackets
7256.00, 7454.00A, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-07-06
259
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
5472.00
Single Broadband Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.1/15.0, 17.5/15.4
TILT: 0-7.5°
LENGTH: 2.0m (6’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
870-960
Gain (dBi/dBd)
17.1/15.0
17.5/15.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.5:1
Horizontal beam width, -3 dB (°)
66
64
Vertical beam width, -3 dB (°)
9.6
9.2
Electrical down tilt (°)
0 - 7.5
Side lobe suppression, vertical 1st upper (dB)
>20,17,15@0,4,7°
Isolation between inputs (dB)
>20,17,15@0,4,7°
30
30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
<-18
<-18
Vertical beam squint (°)
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
-
>11
>11
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2080x280x125 (6’8”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
20 (44)
Weight, without brackets, kg (lbs)
14.5 (31.9)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
664 / 102 / 798
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2225x355x255 (7’3”x1’2”x10”)
Shipping weight, kg (lbs)
24.5 (54)
RET
8110.10 (AISG1.1), 8110.40 (AISG2.0)
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-09-22
260
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
5473.00
Single Broadband Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.7/15.6, 18.5/16.4
TILT: 0-5.5°
LENGTH: 2.6m (8’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
870-960
Gain (dBi/dBd)
17.7/15.6
18.5/16.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.5:1
Horizontal beam width, -3 dB (°)
67
Vertical beam width, -3 dB (°)
7.5
Electrical down tilt (°)
64
7
0-5.5
Side lobe suppression, vertical 1st upper (dB)
>20,17,15@0,2,5°
>20,17,15@0,2,5°
Isolation between inputs (dB)
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
>-18
>-18
Vertical beam squint (°)
0.3
0.3
Front to back ratio (dB) 180°±30° copolar
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
-
>11
>11
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2520x280x125 (8’3”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
21 (46.3)
Weight, without brackets, kg (lbs)
15.5 (34.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2725x355x255 (8’11”x1’2”x10”)
Shipping weight, kg (lbs)
25 (55.1)
RET
8110.10, 8110.40
Brackets
7256.00, 7454.00A, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-09-22
261
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
5477.00
Single Broadband Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.5/14.4, 17.0/14.9
TILT: 0°
LENGTH: 2.0m (6’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
16.5/14.4
17.0/14.9
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.4:1
Horizontal beam width, -3 dB (°)
66
64
Vertical beam width, -3 dB (°)
9.8
9.2
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
>30
>20
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-18
>-18
Vertical beam squint (°)
0.3
0.2
Front to back ratio (dB) 180°±30° copolar
>30
>34
Front to back ratio (dB) 180°±30° total power
>26
>28
Cross polar discrimination (XPD) 0° (dB)
>20
>20
Cross polar discrimination (XPD) ±60° (dB)
>13
>12
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2020x280x125 (6’7”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
18.5 (40.7)
Weight, without brackets, kg (lbs)
13.0 (28.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2225x355x255 (7’3”x1’2”x10”)
Shipping weight, kg (lbs)
23 (50.7)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-07-06
262
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
5478.00
Single Broadband Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.4/15.3, 18.1/16.0
TILT: 0°
LENGTH: 2.6m (8’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
17.4/15.3
18.1/16.0
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.4:1
Horizontal beam width, -3 dB (°)
66
64
Vertical beam width, -3 dB (°)
7.3
7.0
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
>30
>20
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-18
>-18
Vertical beam squint (°)
0.3
0.3
Front to back ratio (dB) 180°±30° copolar
>31
>36
Front to back ratio (dB) 180°±30° total power
>29
>29
Cross polar discrimination (XPD) 0° (dB)
>20
>20
Cross polar discrimination (XPD) ±60° (dB)
>12
>12
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2520x280x125 (8’3”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
22.5 (49.6)
Weight, without brackets, kg (lbs)
17 (37.4)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2725x355x255 (8’11”x1’2”x10”)
Shipping weight, kg (lbs)
27.5 (60.6)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-07-06
263
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
5478.06
Single Broadband Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.4/15.2, 18.0/15.8
TILT: 6°
LENGTH: 2.6m (8’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
17.4/15.2
18.0/15.8
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.4:1
Horizontal beam width, -3 dB (°)
68
64
Vertical beam width, -3 dB (°)
7.5
7.0
Electrical down tilt (°)
6
Side lobe suppression, vertical 1st upper (dB)
>15
Isolation between inputs (dB)
30
>15
30
Tracking, horizontal plane ±60° (dB)
<2.0
<1.0
First null fill (dB)
<-20
<-20
Vertical beam squint (°)
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
Front to back ratio (dB) 180°±30° total power
>28
>27
Cross polar discrimination (XPD) 0° (dB)
>20
>20
Cross polar discrimination (XPD) ±60° (dB)
>12
>12
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
300
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2520x280x125 (8’3”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
19.7 (41.4)
Weight, without brackets, kg (lbs)
14.5 (30.5)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2725x355x255 (8’11”x1’2”x10”)
Shipping weight, kg (lbs)
25.5 (53.5)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-07-06
264
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
5483.00
Single Broadband Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 16.6/14.5, 17.0/14.9
TILT: 0-5.5°
LENGTH: 2.6m (8’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
870-960
Gain (dBi/dBd)
16.6/14.5
17.0/14.9
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
90
90
Vertical beam width, -3 dB (°)
7.5
6.9
Electrical down tilt (°)
0 - 5.5
Side lobe suppression, vertical 1st upper (dB)
>20,17,15@0,2,5°
>20,17,15@0,2,5°
Isolation between inputs (dB)
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-23
>-21
Vertical beam squint (°)
0.3
0.3
Front to back ratio (dB) 180°±30° copolar
>27
>28
Front to back ratio (dB) 180°±30° total power
>22
>22
Cross polar discrimination (XPD) 0° (dB)
>21
>21
Cross polar discrimination (XPD) ±60° (dB)
>10
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2520x280x125 (8’3”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
26.5 (58.4)
Weight, without brackets, kg (lbs)
21 (46.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2725x355x255 (8’11”x1’2”x10”)
Shipping weight, kg (lbs)
31.5 (69.4)
RET
8110.10, 8110.40
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-07-16
265
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
5488.00
Single Broadband Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 16.6/14.5, 17.1/15.0
TILT: 0°
LENGTH: 2.6m (8’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
870-960
Gain (dBi/dBd)
16.6/14.5
17.1/15.0
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
87
84
Vertical beam width, -3 dB (°)
7.6
7.0
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
>30
>20
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-18
>-18
Vertical beam squint (°)
0.2
0.1
Front to back ratio (dB) 180°±30° copolar
>27
>27
Front to back ratio (dB) 180°±30° total power
>22
>22
Cross polar discrimination (XPD) 0° (dB)
>20
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2520x280x125 (8’3”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
24.5 (54)
Weight, without brackets, kg (lbs)
19 (41.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2725x355x255(8’11”x1’2”x10”)
Shipping weight, kg (lbs)
29.5 (65)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-07-06
266
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7476.06
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.6/12.5, 15.1/13
TILT: 6°
LENGTH: 1.3m (4’3”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
Gain (dBi/dBd)
14.6/12.5
Polarization
880-960
15.1/13
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.4:1
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
66
64
15.3
13.9
Electrical down tilt (°)
6
Side lobe suppression, vertical 1st upper (dB)
>19
Isolation between inputs (dB)
30
30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
<-25
<-25
Vertical beam squint (°)
>19
1
1
Front to back ratio (dB) 180°±30° copolar
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
-
>12
>12
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1270x280x125 (4’2”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
14 (30.8)
Weight, without brackets, kg (lbs)
8.5 (18.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
367
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1475x355x255 (4’10”x1’2”x10”)
Shipping weight, kg (lbs)
18 (39.6)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08165 Rev A
Updated: 2010-04-09
267
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7471.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.6/12.5, 15/12.9
TILT: 2-12°
LENGTH: 1.3m (4’3”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
Gain (dBi/dBd)
14.6/12.5
Polarization
870-960
15/12.9
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.5:1
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
65
65
15.3
14.2
Electrical down tilt (°)
2-12
Side lobe suppression, vertical 1st upper (dB)
>19,18,17@2,7,12°
Isolation between inputs (dB)
>19,18,17@2,7,12°
30
30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
<-25
<-25
Vertical beam squint (°)
1
1
Front to back ratio (dB) 180°±30° copolar
>25
>25
Front to back ratio (dB) 180°±30° total power
>24
>25
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
-
>10
>10
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1330x280x125 (4’4”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
14.5 (31.9)
Weight, without brackets, kg (lbs)
9 (19.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
367
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1475x355x255 (4’10”x1’2”x10”)
Shipping weight, kg (lbs)
18.5 (40.7)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08184 Rev A
Updated: 2010-04-27
268
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7477.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.6/13.5, 16.2/14.1
TILT: 0°
LENGTH: 2.0m (6’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
15.6/13.5
16.2/14.1
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.4:1
Horizontal beam width, -3 dB (°)
66
Vertical beam width, -3 dB (°)
9.5
Electrical down tilt (°)
64
9
0
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
30
>20
30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
<-18
<-18
Vertical beam squint (°)
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
-
>12
>12
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2020x280x125 (6’7”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
18.5 (40.7)
Weight, without brackets, kg (lbs)
13 (28.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2225x355x255 (7’3”x1’2”x10”)
Shipping weight, kg (lbs)
23 (50.7)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08166 Rev A
Updated: 2010-04-09
269
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7477.02
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.8/13.7, 16.3/14.2
TILT: 2°
LENGTH: 2.0m (6’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
15.8/13.7
16.3/14.2
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.4:1
Horizontal beam width, -3 dB (°)
66
Vertical beam width, -3 dB (°)
9.5
Electrical down tilt (°)
64
9
2
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
30
>20
30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
<-18
<-18
Vertical beam squint (°)
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
-
>12
>12
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2020x280x125 (6’7”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
18.5 (40.7)
Weight, without brackets, kg (lbs)
13 (28.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2225x355x255 (7’3”x1’2”x10”)
Shipping weight, kg (lbs)
23 (50.7)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08167 Rev A
Updated: 2010-04-09
270
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7478.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.9/14.8, 17.3/15.2
TILT: 0°
LENGTH: 2.6m (8’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
16.9/14.8
17.3/15.2
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.4:1
Horizontal beam width, -3 dB (°)
66
Vertical beam width, -3 dB (°)
7.3
Electrical down tilt (°)
64
7
0
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
30
>20
30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-18
>-18
Vertical beam squint (°)
0.3
0.3
Front to back ratio (dB) 180°±30° copolar
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
-
>12
>12
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2520x280x125 (8’3”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
22.5 (49.6)
Weight, without brackets, kg (lbs)
17 (37.4)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2725x355x255 (8’11”x1’2”x10”)
Shipping weight, kg (lbs)
27.5 (60.6)
RET
-
Brackets
7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08169 Rev A
Updated: 2010-12-02
271
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7472.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16/13.9, 16.5/14.4
TILT: 0-7.5°
LENGTH: 2.0m (6’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
16/13.9
16.5/14.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.4:1
Horizontal beam width, -3 dB (°)
67
Vertical beam width, -3 dB (°)
10
Electrical down tilt (°)
64
9
0-7.5
Side lobe suppression, vertical 1st upper (dB)
>20,17,15@0,4,7°
Isolation between inputs (dB)
>20,17,15@0,4,7°
30
30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
<-18
<-18
Vertical beam squint (°)
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
-
>11
>11
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2080x280x125 (6’8”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
20 (44)
Weight, without brackets, kg (lbs)
14.5 (31.9)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2225x355x255 (7’3”x1’2”x10”)
Shipping weight, kg (lbs)
24.5 (54)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08185 Rev A
Updated: 2010-04-09
272
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7477.06
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16/13.9, 16.5/14.4
TILT: 6°
LENGTH: 2.0m (6’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
16/13.9
16.5/14.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.4:1
Horizontal beam width, -3 dB (°)
66
Vertical beam width, -3 dB (°)
9.5
Electrical down tilt (°)
64
9
6
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
30
>20
30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
<-18
<-18
Vertical beam squint (°)
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
-
>12
>12
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2020x280x125 (6’7”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
18.5 (40.7)
Weight, without brackets, kg (lbs)
13 (28.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2225x355x255 (7’3”x1’2”x10”)
Shipping weight, kg (lbs)
23 (50.7)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08168 Rev A
Updated: 2010-04-09
273
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7478.02
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17/14.9, 17.4/15.3
TILT: 2°
LENGTH: 2.6m (8’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
17/14.9
17.4/15.3
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.4:1
Horizontal beam width, -3 dB (°)
66
Vertical beam width, -3 dB (°)
7.3
Electrical down tilt (°)
64
7
2
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
30
>20
30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
<-18
<-18
Vertical beam squint (°)
0.3
0.3
Front to back ratio (dB) 180°±30° copolar
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
-
>12
>12
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2520x280x125 (8’3”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
22.5 (49.6)
Weight, without brackets, kg (lbs)
17 (37.4)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2725x355x255 (8’11”x1’2”x10”)
Shipping weight, kg (lbs)
27.5 (60.6)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08170 Rev A
Updated: 2010-04-09
274
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7478.06
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17/14.9, 17.4/15.3
TILT: 6°
LENGTH: 2.6m (8’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
17/14.9
17.4/15.3
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.4:1
Horizontal beam width, -3 dB (°)
66
Vertical beam width, -3 dB (°)
7.3
Electrical down tilt (°)
64
7
6
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
30
>20
30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
<-18
<-18
Vertical beam squint (°)
0.3
0.3
Front to back ratio (dB) 180°±30° copolar
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
-
>12
>12
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2520x280x125 (8’3”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
22.5 (49.6)
Weight, without brackets, kg (lbs)
17 (37.4)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2725x355x255 (8’11”x1’2”x10”)
Shipping weight, kg (lbs)
27.5 (60.6)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08171 Rev A
Updated: 2010-04-09
275
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7473.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.2/15.1, 17.5/15.4
TILT: 0-5.5°
LENGTH: 2.6m (8’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
17.2/15.1
17.5/15.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.4:1
Horizontal beam width, -3 dB (°)
67
Vertical beam width, -3 dB (°)
7.5
Electrical down tilt (°)
64
7
0-5.5
Side lobe suppression, vertical 1st upper (dB)
>20,17,15@0,2,5°
Isolation between inputs (dB)
>20,17,15@0,2,5°
30
30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
<-18
<-18
Vertical beam squint (°)
0.3
0.3
Front to back ratio (dB) 180°±30° copolar
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
-
>11
>11
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x280x125 (8’4”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
24 (52.9)
Weight, without brackets, kg (lbs)
18.5 (40.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2725x355x255 (8’11”x1’2”x10”)
Shipping weight, kg (lbs)
28 (61.7)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08186 Rev A
Updated: 2010-04-09
276
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7481.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 13.5/11.4, 14/11.9
TILT: 2-12°
LENGTH: 1.3m (4’3”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
Gain (dBi/dBd)
13.5/11.4
Polarization
870-960
14/11.9
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
87
Vertical beam width, -3 dB (°)
15
Electrical down tilt (°)
85
14
2-12
Side lobe suppression, vertical 1st upper (dB)
>19,18,17@2,7,12°
>19,18,17@2,7,12°
Isolation between inputs (dB)
>30
>30
Tracking, horizontal plane ±60° (dB)
<2
<2
<-18
<-18
First null fill (dB)
Vertical beam squint (°)
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>27
>27
Front to back ratio (dB) 180°±30° total power
>23
>23
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
-
>9
>9
-
-
IM3, 2xTx@43dBm (dBc)
-150
Power handling, average per input (W)
400
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1270x280x125 (4’2”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
18.5 (40.7)
Weight, without brackets, kg (lbs)
13 (28.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
367
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1475x355x255 (4’10”x1’2”x10”)
Shipping weight, kg (lbs)
22.5 (49.6)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08183 Rev A
Updated: 2010-04-27
277
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7486.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 13.5/11.4, 14/11.9
TILT: 0°
LENGTH: 1.4m (4’7”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
Gain (dBi/dBd)
13.5/11.4
Polarization
880-960
14/11.9
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
87
Vertical beam width, -3 dB (°)
84
15.5
Electrical down tilt (°)
14
0
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
>30
>20
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-21
>-25
Vertical beam squint (°)
0.6
0.4
Front to back ratio (dB) 180°±30° copolar
>27
>27
Front to back ratio (dB) 180°±30° total power
>22
>22
Cross polar discrimination (XPD) 0° (dB)
>21
>21
Cross polar discrimination (XPD) ±60° (dB)
>10
>11
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1270x280x125 (4’2”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
16.5 (36.3)
Weight, without brackets, kg (lbs)
11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
367
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1475x355x255 (4’10”x1’2”x10”)
Shipping weight, kg (lbs)
20.5 (45.1)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08172 Rev A
Updated: 2010-04-09
278
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7486.02
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 13.6/11.5, 14.1/12
TILT: 2°
LENGTH: 1.4m (4’7”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
Gain (dBi/dBd)
13.6/11.5
Polarization
880-960
14.1/12
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.4:1
Horizontal beam width, -3 dB (°)
87
Vertical beam width, -3 dB (°)
84
15.4
Electrical down tilt (°)
14
2
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
>30
>20
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-23
>-25
Vertical beam squint (°)
0.4
0.4
Front to back ratio (dB) 180°±30° copolar
>28
>28
Front to back ratio (dB) 180°±30° total power
>22
>22
Cross polar discrimination (XPD) 0° (dB)
>21
>21
Cross polar discrimination (XPD) ±60° (dB)
>10
>11
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1270x280x125 (4’2”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
16.5 (36.3)
Weight, without brackets, kg (lbs)
11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
367
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1475x355x255 (4’10”x1’2”x10”)
Shipping weight, kg (lbs)
20.5 (45.1)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08173 Rev A
Updated: 2010-04-09
279
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7486.06
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 13.6/11.5, 14/11.9
TILT: 6°
LENGTH: 1.4m (4’7”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
Gain (dBi/dBd)
13.6/11.5
Polarization
880-960
14/11.9
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
87
85
15.5
13.9
Electrical down tilt (°)
6
Side lobe suppression, vertical 1st upper (dB)
>18
Isolation between inputs (dB)
>30
>18
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-25
>-25
Vertical beam squint (°)
0.6
0.6
Front to back ratio (dB) 180°±30° copolar
>27
>28
Front to back ratio (dB) 180°±30° total power
>22
>22
Cross polar discrimination (XPD) 0° (dB)
>22
>22
Cross polar discrimination (XPD) ±60° (dB)
>10
>11
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1270x280x125 (4’2”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
16.5 (36.3)
Weight, without brackets, kg (lbs)
11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
367
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1475x355x255 (4’10”x1’2”x10”)
Shipping weight, kg (lbs)
20.5 (45.1)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08174 Rev A
Updated: 2010-04-09
280
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7487.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 14.8/12.7, 15.4/13.3
TILT: 0°
LENGTH: 2.0m (6’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
14.8/12.7
15.4/13.3
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
87
Vertical beam width, -3 dB (°)
9.7
Electrical down tilt (°)
84
9
0
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
>30
>20
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-20
>-18
Vertical beam squint (°)
0.1
0.2
Front to back ratio (dB) 180°±30° copolar
>28
>29
Front to back ratio (dB) 180°±30° total power
>22
>22
Cross polar discrimination (XPD) 0° (dB)
>20
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2020x280x125 (6’7”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
20.5 (45.1)
Weight, without brackets, kg (lbs)
15 (33)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2225x355x255 (7’3”x1’2”x10”)
Shipping weight, kg (lbs)
25 (55.1)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08175 Rev A
Updated: 2010-04-09
281
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7482.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 14.8/12.7, 15.5/13.4
TILT: 0-7.5°
LENGTH: 2.0m (6’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
870-960
Gain (dBi/dBd)
14.8/12.7
15.5/13.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
88
Vertical beam width, -3 dB (°)
9.6
Electrical down tilt (°)
86
9
0-7.5
Side lobe suppression, vertical 1st upper (dB)
>20,17,15@0,4,7°
>20,17,15@0,4,7°
Isolation between inputs (dB)
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-25
>-20
Vertical beam squint (°)
0.4
0.4
Front to back ratio (dB) 180°±30° copolar
>27
>27
Front to back ratio (dB) 180°±30° total power
>22
>22
Cross polar discrimination (XPD) 0° (dB)
>20
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2020x280x125 (6’7”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
22.5 (49.6)
Weight, without brackets, kg (lbs)
17 (37.4)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2225x355x255 (7’3”x1’2”x10”)
Shipping weight, kg (lbs)
27 (59.5)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08187 Rev A
Updated: 2010-04-27
282
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7488.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 15.8/13.7, 16.3/14.2
TILT: 0°
LENGTH: 2.6m (8’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
15.8/13.7
16.3/14.2
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
87
Vertical beam width, -3 dB (°)
7.6
Electrical down tilt (°)
84
7
0
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
>30
>20
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-18
>-18
Vertical beam squint (°)
0.2
0.1
Front to back ratio (dB) 180°±30° copolar
>27
>27
Front to back ratio (dB) 180°±30° total power
>22
>22
Cross polar discrimination (XPD) 0° (dB)
>21
>21
Cross polar discrimination (XPD) ±60° (dB)
>10
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2520x280x125 (8’3”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
24.5 (54)
Weight, without brackets, kg (lbs)
19 (41.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2725x355x255 (8’11”x1’2”x10”)
Shipping weight, kg (lbs)
29.5 (65)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08178 Rev A
Updated: 2010-04-09
283
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7488.02
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 15.8/13.7, 16.3/14.2
TILT: 2°
LENGTH: 2.6m (8’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
15.8/13.7
16.3/14.2
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
87
Vertical beam width, -3 dB (°)
7.6
Electrical down tilt (°)
84
7
2
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
>30
>20
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-18
>-18
Vertical beam squint (°)
0.3
0.2
Front to back ratio (dB) 180°±30° copolar
>26
>27
Front to back ratio (dB) 180°±30° total power
>22
>22
Cross polar discrimination (XPD) 0° (dB)
>20
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2520x280x125 (8’3”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
24.5 (54)
Weight, without brackets, kg (lbs)
19 (41.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2725x355x255 (8’11”x1’2”x10”)
Shipping weight, kg (lbs)
29.5 (65)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08179 Rev A
Updated: 2010-04-09
284
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7483.00
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 15.9/13.8, 16.3/14.2
TILT: 0-5.5°
LENGTH: 2.6m (8’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
15.9/13.8
16.3/14.2
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
87
84
Vertical beam width, -3 dB (°)
7.5
6.9
Electrical down tilt (°)
0-5.5
Side lobe suppression, vertical 1st upper (dB)
>20,17,15@0,2,5°
>20,17,15@0,2,5°
Isolation between inputs (dB)
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-23
>-21
Vertical beam squint (°)
0.3
0.3
Front to back ratio (dB) 180°±30° copolar
>27
>28
Front to back ratio (dB) 180°±30° total power
>22
>22
Cross polar discrimination (XPD) 0° (dB)
>21
>21
Cross polar discrimination (XPD) ±60° (dB)
>10
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2520x280x125 (8’3”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
26.5 (58.4)
Weight, without brackets, kg (lbs)
21 (46.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2725x355x255 (8’11”x1’2”x10”)
Shipping weight, kg (lbs)
31.5 (69.4)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08188 Rev A
Updated: 2010-04-09
285
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7488.06
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 15.9/13.8, 16.4/14.3
TILT: 6°
LENGTH: 2.6m (8’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
15.9/13.8
16.4/14.3
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
87
Vertical beam width, -3 dB (°)
7.6
Electrical down tilt (°)
84
7
6
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
>30
>20
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-20
>-20
Vertical beam squint (°)
0.1
0.2
Front to back ratio (dB) 180°±30° copolar
>26
>27
Front to back ratio (dB) 180°±30° total power
>22
>22
Cross polar discrimination (XPD) 0° (dB)
>20
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2520x280x125 (8’3”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
24.5 (54)
Weight, without brackets, kg (lbs)
19 (41.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
835
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2725x355x255 (8’11”x1’2”x10”)
Shipping weight, kg (lbs)
29.5 (65)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08180 Rev A
Updated: 2010-04-09
286
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7487.02
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 15/12.9, 15.5/13.4
TILT: 2°
LENGTH: 2.0m (6’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
15/12.9
15.5/13.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
87
Vertical beam width, -3 dB (°)
9.7
Electrical down tilt (°)
84
9
2
Side lobe suppression, vertical 1st upper (dB)
>20
Isolation between inputs (dB)
>30
>20
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-20
>-18
Vertical beam squint (°)
0.3
0.2
Front to back ratio (dB) 180°±30° copolar
>28
>29
Front to back ratio (dB) 180°±30° total power
>22
>22
Cross polar discrimination (XPD) 0° (dB)
>20
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2020x280x125 (6’7”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
20.5 (45.1)
Weight, without brackets, kg (lbs)
15 (33)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2225x355x255 (7’3”x1’2”x10”)
Shipping weight, kg (lbs)
25 (55.1)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08176 Rev A
Updated: 2010-04-09
287
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Broadband Antennas
7487.06
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 15/12.9, 15.5/13.4
TILT: 6°
LENGTH: 2.0m (6’6”)
Low Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-960
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
15/12.9
15.5/13.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
87
Vertical beam width, -3 dB (°)
9.7
Electrical down tilt (°)
84
9
6
Side lobe suppression, vertical 1st upper (dB)
>17
Isolation between inputs (dB)
>30
>20
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
First null fill (dB)
>-20
>-20
Vertical beam squint (°)
0.1
0.2
Front to back ratio (dB) 180°±30° copolar
>28
>28
Front to back ratio (dB) 180°±30° total power
>22
>22
Cross polar discrimination (XPD) 0° (dB)
>20
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
400
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2020x280x125 (6’7”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
20.5 (45.1)
Weight, without brackets, kg (lbs)
15 (33)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
664
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2225x355x255 (7’3”x1’2”x10”)
Shipping weight, kg (lbs)
25 (55.1)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08177 Rev A
Updated: 2010-04-09
288
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Single Broadband Antennas
POWERWAVE
Low Broadband Cross Polarized Antennas, 698-894 MHz
Single Broadband Antennas
Cross Polarized
Low Broadband Cross Polarized Antennas, 698-894 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
65
14.5/12.4
2°
1.2m(48”)
P65-15-XL-2
290
65
14.5/12.4
4°
1.2m(48”)
P65-15-XL-4
291
65
16.0/13.9
2°
1.8m(72”)
P65-16-XL-2
292
65
16.0/13.9
4°
1.8m(72”)
P65-16-XL-4
293
65
16.0/13.9
6°
1.8m(72”)
P65-16-XL-6
294
65
17.5/15.4
2°
2.4m(96”)
P65-17-XL-2
295
65
17.5/15.4
4°
2.4m(96”)
P65-17-XL-4
296
289
POWERWAVE
P65-15-XL-2
Single Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.5/12.4
TILT: 2°
LENGTH: 1.2m (48”)
Very Low Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
Frequency band (MHz)
698-806
806-894
Gain (dBi/dBd)
14.0/11.9
14.5/12.4
Polarization
Dual Linear +/- 45
1RPLQDO,PSHGDQFH ȍ
50
VSWR
< 1.33:1
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
68
65
16.5
15.5
Electrical down tilt (°)
2
Side lobe suppression, vertical 1st upper (dB)
> 15
Tracking, horizontal plane ±60° (dB)
<2
<2
Isolation between inputs (dB)
> 30
> 30
First null fill (dB)
> 15
-
-
Vertical beam squint (°)
< 0.5
< 0.5
Front to back ratio (dB) 180°±30° copolar
> 30
> 30
Front to back ratio (dB) 180°±30° total power
> 25
> 25
Cross polar discrimination (XPD) 0° (dB)
> 15
> 15
Cross polar discrimination (XPD) ±60° (dB)
> 10
> 10
IM3, 2xTx@43dBm (dBc)
-153
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 X 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, in (mm)
48”x12”x5” (1219x305x125)
Mounting
Pre-mounted Tilt Brackets
Weight, with brackets, lbs (kg)
33 (15)
Weight, without brackets, lbs (kg)
22 (10)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
400
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
125 (55)
Lightning protection
DC Ground
Operating Temperature
Radome material
PVC
Packet size, HxWxD, in (mm)
58” x 16” x 10” (1475 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
44 (22)
RET
N/A
Brackets
7256.00, 7454.00, 2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2008-08-27
290
POWERWAVE
P65-15-XL-4
Single Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.5/12.4
TILT: 4°
LENGTH: 1.2m (48”)
Very Low Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
Frequency band (MHz)
698-806
806-894
Gain (dBi/dBd)
14.0/11.9
14.5/12.4
Polarization
Dual Linear +/- 45
1RPLQDO,PSHGDQFH ȍ
50
VSWR
< 1.33:1
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
68
65
16.5
15.5
Electrical down tilt (°)
4
Side lobe suppression, vertical 1st upper (dB)
> 15
Tracking, horizontal plane ±60° (dB)
<2
<2
Isolation between inputs (dB)
> 30
> 30
First null fill (dB)
> 15
-
-
Vertical beam squint (°)
< 0.5
< 0.5
Front to back ratio (dB) 180°±30° copolar
> 30
> 30
Front to back ratio (dB) 180°±30° total power
> 25
> 25
Cross polar discrimination (XPD) 0° (dB)
> 15
> 15
Cross polar discrimination (XPD) ±60° (dB)
> 10
> 10
IM3, 2xTx@43dBm (dBc)
-153
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 X 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, in (mm)
48”x12”x5” (1219x305x125)
Mounting
Pre-mounted Tilt Brackets
Weight, with brackets, lbs (kg)
33 (15)
Weight, without brackets, lbs (kg)
22 (10)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
400
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
125 (55)
Lightning protection
DC Ground
Operating Temperature
Radome material
PVC
Packet size, HxWxD, in (mm)
58” x 16” x 10” (1475 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
44 (20)
RET
N/A
Brackets
7256.00, 7454.00, 2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2008-08-27
291
POWERWAVE
P65-16-XL-2
Single Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.0/13.9
TILT: 2°
LENGTH: 1.8m (72”)
Very Low Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
Frequency band (MHz)
698-806
806-894
Gain (dBi/dBd)
15.5/13.4
16.0/13.9
Dual Linear +/- 45
Dual Linear +/- 45
Polarization
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
50
50
< 1.33: 1
< 1.33: 1
68
65
Vertical beam width, -3 dB (°)
10.5
9.5
Side lobe suppression, vertical 1st upper (dB)
> 15
> 15
Isolation between inputs (dB)
> 30
> 30
Tracking, horizontal plane ±60° (dB)
<2
<2
Electrical Downtilt Range
2
2
Vertical beam squint (°)
< 0.5
< 0.5
Front to back ratio (dB) 180°±30° copolar
> 30
> 30
Front to back ratio (dB) 180°±30° total power
> 25
> 25
Cross polar discrimination (XPD) 0° (dB)
> 15
> 15
Cross polar discrimination (XPD) ±60° (dB)
> 10
> 10
IM3, 2xTx@43dBm (dBc)
-153
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 X 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, in (mm)
72” x 12” x 5” (1829 x 305 x 125)
Mounting
Pre-mounted Tilt Brackets
Weight, with brackets, lbs (kg)
44 (20)
Weight, without brackets, lbs (kg)
33 (15)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
680
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
125 (55)
Lightning protection
DC Ground
Operating Temperature
Radome material
PVC
Packet size, HxWxD, in (mm)
82” x 16” x 10” (2082 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
55 (25)
RET
N/A
Brackets
7256.00, 7454.00, 2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2008-08-27
292
POWERWAVE
P65-16-XL-4
Single Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.0/13.9
TILT: 4°
LENGTH: 72”
Very Low Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
Frequency band (MHz)
698-806
806-894
Gain (dBi/dBd)
15.5/13.4
16.0/13.9
Polarization
Dual Linear +/- 45
1RPLQDO,PSHGDQFH ȍ
50
VSWR
< 1.33: 1
Horizontal beam width, -3 dB (°)
68
65
Vertical beam width, -3 dB (°)
10.5
9.5
Side lobe suppression, vertical 1st upper (dB)
> 15
> 15
Isolation between inputs (dB)
> 30
> 30
Tracking, horizontal plane ±60° (dB)
<2
<2
Electrical Downtilt Range
4
Vertical beam squint (°)
< 0.5
< 0.5
Front to back ratio (dB) 180°±30° copolar
> 30
> 30
Front to back ratio (dB) 180°±30° total power
> 25
> 25
Cross polar discrimination (XPD) 0° (dB)
> 15
> 15
Cross polar discrimination (XPD) ±60° (dB)
> 10
> 10
IM3, 2xTx@43dBm (dBc)
-153
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 X 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, in (mm)
72” x 12” x 5” (1829 x 305 x 125)
Mounting
Pre-mounted Tilt Brackets
Weight, with brackets, lbs (kg)
44 (20)
Weight, without brackets, lbs (kg)
33 (15)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
1380
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
125 (55)
Lightning protection
DC Ground
Operating Temperature
Radome material
PVC
Packet size, HxWxD, in (mm)
82” x 16” x 10” (2082 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
55 (25)
RET
N/A
Brackets
7256.00, 7454.00, 2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2008-08-27
293
POWERWAVE
P65-16-XL-6
Single Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.0/13.9
TILT: 6°
LENGTH: 1.8m (72”)
Very Low Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
Frequency band (MHz)
698-806
806-894
Gain (dBi/dBd)
15.5/13.4
16.0/13.9
Dual Linear +/- 45
Dual Linear +/- 45
Polarization
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
50
50
< 1.33: 1
< 1.33: 1
68
65
Vertical beam width, -3 dB (°)
10.5
9.5
Side lobe suppression, vertical 1st upper (dB)
> 15
> 15
Isolation between inputs (dB)
> 30
> 30
Tracking, horizontal plane ±60° (dB)
<2
<2
Electrical Downtilt Range
6
6
Vertical beam squint (°)
< 0.5
< 0.5
Front to back ratio (dB) 180°±30° copolar
> 30
> 30
Front to back ratio (dB) 180°±30° total power
> 25
> 25
Cross polar discrimination (XPD) 0° (dB)
> 15
> 15
Cross polar discrimination (XPD) ±60° (dB)
> 10
> 10
IM3, 2xTx@43dBm (dBc)
-153
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 X 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, in (mm)
72” x 12” x 5” (1829 x 305 x 125)
Mounting
Pre-mounted Tilt Brackets
Weight, with brackets, lbs (kg)
44 (20)
Weight, without brackets, lbs (kg)
33 (15)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
680
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
125 (55)
Lightning protection
DC Ground
Operating Temperature
Radome material
PVC
Packet size, HxWxD, in (mm)
82” x 16” x 10” (2082 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
55 (25)
RET
N/A
Brackets
7256.00, 7454.00, 2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2008-08-27
294
POWERWAVE
P65-17-XL-2
Single Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.5/15.4
TILT: 2°
LENGTH: 2.4m (96”)
Very Low Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
Frequency band (MHz)
698-806
806-894
Gain (dBi/dBd)
16.5/14.4
17.5/15.4
Dual Linear +/- 45
Dual Linear +/- 45
Polarization
1RPLQDO,PSHGDQFH ȍ
VSWR
50
50
< 1.33:1
< 1.33:1
Horizontal beam width, -3 dB (°)
68
65
Vertical beam width, -3 dB (°)
8.5
7.5
Electrical down tilt (°)
2
2
Side lobe suppression, vertical 1st upper (dB)
> 15
> 15
Isolation between inputs (dB)
> 30
> 30
Tracking, horizontal plane ±60° (dB)
<2
<2
Vertical beam squint (°)
< 0.5
< 0.5
Front to back ratio (dB) 180°±30° copolar
> 30
> 30
Front to back ratio (dB) 180°±30° total power
> 25
> 25
Cross polar discrimination (XPD) 0° (dB)
> 15
> 15
Cross polar discrimination (XPD) ±60° (dB)
> 10
> 10
IM3, 2xTx@43dBm (dBc)
-153
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 X 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, in (mm)
96” x 12” x 5” (2438 x 305 x 125)
Mounting
Pre-mounted Tilt Brackets
Weight, with brackets, lbs (kg)
54 (25)
Weight, without brackets, lbs (kg)
43 (20)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
880
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
125 (55)
Lightning protection
DC Ground
Operating Temperature
Radome material
PVC
Packet size, HxWxD, in (mm)
107” x 16” x 10” (2725 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
65 (30)
RET
N/A
Brackets
7256.00, 7454.00, 2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2008-08-27
295
POWERWAVE
P65-17-XL-4
Single Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.5/15.4
TILT: 4°
LENGTH: 2.4m (96”)
Very Low Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
Frequency band (MHz)
698-806
806-894
Gain (dBi/dBd)
16.5/14.4
17.5/15.4
Dual Linear +/- 45
Dual Linear +/- 45
Polarization
1RPLQDO,PSHGDQFH ȍ
VSWR
50
50
< 1.33:1
< 1.33:1
Horizontal beam width, -3 dB (°)
68
65
Vertical beam width, -3 dB (°)
8.5
7.5
Electrical down tilt (°)
4
4
Side lobe suppression, vertical 1st upper (dB)
> 15
> 15
Isolation between inputs (dB)
> 30
> 30
Tracking, horizontal plane ±60° (dB)
<2
<2
Vertical beam squint (°)
< 0.5
< 0.5
Front to back ratio (dB) 180°±30° copolar
> 30
> 30
Front to back ratio (dB) 180°±30° total power
> 25
> 25
Cross polar discrimination (XPD) 0° (dB)
> 15
> 15
Cross polar discrimination (XPD) ±60° (dB)
> 10
> 10
IM3, 2xTx@43dBm (dBc)
-153
Power handling, average per input (W)
400
Power handling, average total (W)
800
MECHANICAL SPECIFICATIONS*
Connector
2 X 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, in (mm)
96” x 12” x 5” (2438 x 305 x 125)
Mounting
Pre-mounted Tilt Brackets
Weight, with brackets, lbs (kg)
54 (25)
Weight, without brackets, lbs (kg)
43 (20)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
880
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
125 (55)
Lightning protection
DC Ground
Operating Temperature
Radome material
PVC
Packet size, HxWxD, in (mm)
107” x 16” x 10” (2725 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
65 (30)
RET
N/A
Brackets
7256.00, 7454.00, 2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2008-08-27
296
Single Broadband Antennas
POWERWAVE
ALP Broadband Vertical Polarized Antennas, 806-960 MHz
Single Broadband Antennas
Vertical Polarized
ALP Broadband Vertical Polarized Antennas, 806-960 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
80
14.5/12.4
FET
1.3m (4'4")
7824.00
297
Page
298
POWERWAVE
7824.00
Single Broadband Antennas
POLARIZATION: Vertical Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (°): 80
GAIN (dBi/dBd): 14.5/12.4
TILT: FET
LENGTH: 1.3m (4’4”)
ALP Broadband Vertical Polarized
ELECTRICAL SPECIFICATIONS*
806-960
Frequency range (MHz)
Frequency band (MHz)
806-896
880-960
Gain (dBi/dBd)
14.5/12.4
14.5/12.4
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
80
Vertical beam width, -3 dB (°)
15
Electrical down tilt (°)
80
15
0
Side lobe suppression, vertical 1st upper (dB)
>18
>18
First null fill (dB)
none
none
Vertical beam squint (°)
<0.2
<0.2
Front to back ratio (dB) 180°±30° copolar
>28
IM3, 2xTx@43dBm (dBc)
>28
<-146
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Back
Dimensions, HxWxD, mm (ft)
1320x330x290 (4’4”x1’1”x11”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
12.9 (28.4)
Weight, without brackets, kg (lbs)
7.4 (16.3)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
490
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
1346x360x335 (4’5”x1’2”x1’1”)
Shipping weight, kg (lbs)
13 (28.6)
Brackets
7256.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D_
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-03-31
298
Dual Broadband Antennas
POWERWAVE
Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz
Dual Broadband Antennas
Cross Polarized
Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
65
17.7/15.6, 17.7/15.6, 17.9/15.8
MET
1.3m (4'3")
7760.02
300
65
17.7/15.6, 17.9/15.8, 18.1/16
MET
1.3m (4'3")
7760.00
301
65
18/15.9
MET
1.3m (4'3")
7760.03
302
65
18/15.9
MET
1.3m (4'3")
7760.06
303
65
19/16.9, 19.2/17.1, 19.4/17.3
MET
2.0m (6'6")
7765.00
304
90
16.1/14, 16.2/14.1, 16.5/14.4
MET
1.3m (4'3")
7762.00
305
90
17.4/15.3, 17.5/15.4, 17.7/15.6
MET
2.0m (6'6")
7766.00
306
299
Page
POWERWAVE
7760.02
Dual Broadband Antennas
Dual High Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8
TILT: 2-10°
LENGTH: 1.3m (4’3”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.7/15.6
17.7/15.6
17.9/15.8
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
65
63
Vertical beam width, -3 dB (°)
7.1
6.8
6.2
>19,19,18,17,16@2,4,6,8,10°
>19,19,18,17,16@2,4,6,8,10°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
<2.0
>-24,typical>-18
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
2-10
First null fill (dB)
>19,19,18,17,16@2,4,6,8,10°
>-27,typical>-18
>-24,typical>-18
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>28
>28
>28
Cross polar discrimination (XPD) 0° (dB)
>16
>16
>20
Cross polar discrimination (XPD) ±60° (dB)
>16
>13
>10
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
<-160
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
1000
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x343x100 (4’4”x1’1”x3”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
19.5 (42.9)
Weight, without brackets, kg (lbs)
14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1430x400x200 (4’8”x1’3”x7”)
Shipping weight, kg (lbs)
27.5 (60.6)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-05-28
300
POWERWAVE
Dual Broadband Antennas
7760.00
Dual High Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0
TILT: 0-8°
LENGTH: 1.3m (4’3”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.7/15.6
17.9/15.8
18.1/16.0
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
65
64
Vertical beam width, -3 dB (°)
7.1
6.8
6.2
>22,20,18,16,14@0,2,4,6,8°
>22,20,18,16,14@0,2,4,6,8°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
<2.0
>-24,typical>-18
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
0-8
First null fill (dB)
>22,20,18,16,14@0,2,4,6,8°
>-27,typical>-18
>-24,typical>-18
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>28
>28
>28
Cross polar discrimination (XPD) 0° (dB)
>16
>16
>20
Cross polar discrimination (XPD) ±60° (dB)
>16
>13
>10
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
<-160
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
1000
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x343x100 (4’4”x1’1”x3”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
19.5 (42.9)
Weight, without brackets, kg (lbs)
14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1430x430x250 (4’8”x1’3”x9”)
Shipping weight, kg (lbs)
23.5 (51.8)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08204 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-09
301
POWERWAVE
Dual Broadband Antennas
7760.03
Dual High Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.7/15.6, 17.7/15.6,
17.9/15.8
TILT: 2-10°/6-14°
LENGTH: 1.3m (4’3”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.7/15.6
17.7/15.6
17.9/15.8
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
65
63
Vertical beam width, -3 dB (°)
7.1
6.8
6.2
>19,19,18,17,16@2,4,6,8,10°
>19,19,18,17,16@2,4,6,8,10°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
<2.0
>-24,typical>-18
Electrical down tilt (°)
2 to 10 and 6 to 14
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
>19,19,18,17,16@2,4,6,8,10°
>-27,typical>-18
>-24,typical>-18
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>28
>28
>28
Cross polar discrimination (XPD) 0° (dB)
>16
>16
>20
Cross polar discrimination (XPD) ±60° (dB)
>16
>13
>10
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
1000
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x343x100 (4’4”x1’1”x3”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
19.5 (42.9)
Weight, without brackets, kg (lbs)
14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1430x400x200 (4’8”x1’3”x7”)
Shipping weight, kg (lbs)
27.5 (60.6)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08204 Rev. A
Updated: 2010-04-09
302
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Broadband Antennas
7760.06
Dual High Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8
TILT: 6-14°
LENGTH: 1.3m (4’3”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.7/15.6
17.7/15.6
17.9/15.8
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
65
63
Vertical beam width, -3 dB (°)
7.1
6.8
6.2
>17,16@6,8,10°
>17,16@6,8,10°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
<2.0
>-24,typical>-18
Electrical down tilt (°)
6-14
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
>17,16@6,8,10°
>-27,typical>-18
>-24,typical>-18
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>28
>28
>28
Cross polar discrimination (XPD) 0° (dB)
>16
>16
>20
Cross polar discrimination (XPD) ±60° (dB)
>16
>13
>10
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
-
IM7, 2xTx@43dBm (dBc)
-
-
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
1000
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
x343x100 (4’4”x1’1”x3”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
19.5 (42.9)
Weight, without brackets, kg (lbs)
14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1430x400x200 (4’8”x1’3”x7”)
Shipping weight, kg (lbs)
27.5 (60.6)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08204 Rev. A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-09
303
POWERWAVE
Dual Broadband Antennas
7765.00
Dual High Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 19.0/16.9, 19.2/17.1, 19.4/17.3
TILT: 0-5.5°
LENGTH: 2.0m (6’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
19.0/16.9
19.2/17.1
19.4/17.3
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
65
63
Vertical beam width, -3 dB (°)
4.7
4.4
4.2
>22,20,18,16,15,13@0,1,2,3,4,5°
>22,20,18,16,15,14@0,1,2,3,4,5°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
<2.0
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
0-5.5
First null fill (dB)
>22,20,18,16,15,14@0,1,2,3,4,5°
>-22,typical>-18
>-22,typical>-18
>-22,typical>-18
Vertical beam squint (°)
<0.5
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>28
>28
>28
Cross polar discrimination (XPD) 0° (dB)
>16
>16
>20
Cross polar discrimination (XPD) ±60° (dB)
>16
>13
>10
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
<-160
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
1000
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1934x343x100 (6’4”x11”x3”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
22.5 (49.6)
Weight, without brackets, kg (lbs)
17 (37.4)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
819
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2085x430x250 (6’10”x1’3”x9”)
Shipping weight, kg (lbs)
27 (59.5)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08206 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-09
304
POWERWAVE
Dual Broadband Antennas
7762.00
Dual High Broadband Cross Polarized
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 16.1/14.0, 16.2/14.1, 16.5/14.4
TILT: 0-8°
LENGTH: 1.3m (4’3”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
16.1/14.0
16.2/14.1
16.5/14.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
89
93
90
Vertical beam width, -3 dB (°)
7.0
6.7
6.3
>17,17,16,15,14@0,2,4,6,8°
>17,17,16,15,14@0,2,4,6,8°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
<2.0
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
0-8
First null fill (dB)
>20,18,17,16,15@0,2,4,6,8°
>-25,typical>-18
>-25,typical>-18
>-25,typical>-18
Vertical beam squint (°)
<0.5
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>24
>25
>26
Front to back ratio (dB) 180°±30° total power
>23
>23
>23
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>12
Cross polar discrimination (XPD) ±60° (dB)
>7
>7
>7
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
<-160
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
1000
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x343x100 (4’4”x1’1”x3”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
23.5 (51.8)
Weight, without brackets, kg (lbs)
18 (39.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1430x400x200 (4’8”x1’3”x7”)
Shipping weight, kg (lbs)
27.5 (60.6)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08204 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-09
305
POWERWAVE
Dual Broadband Antennas
7766.00
Dual High Broadband Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 17.4/15.3, 17.5/15.4, 17.7/15.6
TILT: 0-5.5°
LENGTH: 2.0m (6’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.4/15.3
17.5/15.4
17.7/15.6
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
89
93
90
Vertical beam width, -3 dB (°)
4.7
4.4
4.2
>18,18,15,14,13,11@0,1,2,3,4,5°
>20,20,17,16,14,14@0,1,2,3,4,5°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
<2.0
Electrical down tilt (°)
0-5.5
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
>22,20,18,16,15,14@0,1,2,3,4,5°
>-25,typical>-18
>-25,typical>-18
>-25,typical>-18
Vertical beam squint (°)
<0.5
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>25
>25
>25
Front to back ratio (dB) 180°±30° total power
>23
>23
>23
Cross polar discrimination (XPD) 0° (dB)
>16
>16
>12
Cross polar discrimination (XPD) ±60° (dB)
>8
>8
>8
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
<-160
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
1000
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1934x343x100 (6’4”x11”x3”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
27.5 (60.6)
Weight, without brackets, kg (lbs)
22 (48.5)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
819
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2085x430x250 (6’10”x1’3”x9”)
Shipping weight, kg (lbs)
32 (70.5)
RET
8110.40. 8110.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08207 Rev. A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-09
306
Dual Broadband Antennas
POWERWAVE
Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz
Dual Broadband Antennas
Cross Polarized
Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
65
15.2/13.1, 18/15.9
MET
1.4m (4’7”)
7750.1ST.0000.00
308
65
15.2/13.1, 18/15.9
MET
1.4m (4’7”)
7750.00
309
65
15.2/13.1, 18/15.9
MET
1.4m (4’7”)
7750.0S0.0000.00
310
65
15.2/13.1, 18/15.9
MET
1.4m (4’7”)
7750.90
311
65
16.7/14.6, 17.6/15.5
MET
2.0m (6'6")
7752.90
312
65
16.7/14.6, 17.6/15.5
MET
2.0m (6'6")
7752.00
313
65
16.7/14.6, 17.6/15.5
MET
2.0m (6'6")
7752.0S0.0000.00
314
65
17.3/15.2, 17.8/15.7
MET
2.6m (8'6")
7755.00
315
65
17.3/15.2, 17.8/15.7
MET
2.6m (8’6”)
7755.90
316
65
17.3/15.2, 17.8/15.7
MET
2.6m (8’6”)
7755.0S0.0000.00
317
307
Page
POWERWAVE
Dual Broadband Antennas
7750.1ST.0000.00
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.2/13.1, 18/15.9
TILT: MET
LENGTH: 1.4m (4’7”)
Dual Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
1710-2170
Frequency band (MHz)
824-896
880-960
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
14.6/12.5
15.2/13.1
17.5/15.4
17.7/15.6
18/15.9
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
50
50
<1.5:1
<1.5:1
69
67
65
65
62
14.9
13.7
6.9
6.6
6.2
>18,17,16,16,15,15@
>18,17,16,16,15,15@
>18,18,16,15,14@
>18,18,16,15,14@
>18,18,16,15,14@
2,4,6,8,10,12°
2,4,6,8,10,12°
2,4,6,8°
2,4,6,8°
2,4,6,8°
30
30
30
30
30
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
Dual linear ±45°
8 to 18
Isolation between inputs (dB)
Inter band Isolation (dB)
4 to 12
40
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<2.0
<2.0
<2.0
First null fill (dB)
<-25
<-25
<-25
<-25
<-25
Vertical beam squint (°)
0.5
0.5
0.3
0.3
0.3
Front to back ratio (dB) 180°±30° copolar
>27
>27
>27
>27
>27
Front to back ratio (dB) 180°±30° total power
>24
>24
>24
>24
>24
Cross polar discrimination (XPD) 0° (dB)
15
15
20
20
20
Cross polar discrimination (XPD) ±60° (dB)
10
8
7
>7
>7
<0.48
<0.62
<0.62
<0.62
Far field coupling
<0.33
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-153
<-153
-
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
600
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1408x280x125mm (4’7”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
17.6 (39)
Weight, without brackets, kg (lbs)
12.1 (27)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Package size, HxWxD, mm (ft)
1550x355x255 (5’1”x1’2”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
21.5 (47.3)
RET
8210.40, 8210.10, 8220.40, 8220.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08201 Rev. A
Updated: 2009-07-28
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
308
POWERWAVE
Dual Broadband Antennas
7750.00
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.2/13.1, 18/15.9
TILT: 2-12°/0-8°
LENGTH: 1.4m (4’7”)
Dual Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
1710-2170
Frequency band (MHz)
824-896
870-960
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
14.6/12.5
15.2/13.1
17.5/15.4
17.7/15.6
18.0/15.9
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Dual linear ±45°
50
50
1.5:1
1.5:1
69
67
65
65
62
14.9
13.7
6.9
6.6
6.2
>18,17,16,16,15,15@
>18,17,16,16,15,15@
>18,18,16,15,14@
>18,18,16,15,14@
>18,18,16,15,14@
2,4,6,8,10,12°
2,4,6,8,10,12°
2,4,6,8°
2,4,6,8°
2,4,6,8°
30
30
30
30
30
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
2 - 12
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0-8
40
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<2.0
<2.0
<2.0
First null fill (dB)
<-25
<-25
<-25
<-25
<-25
Vertical beam squint (°)
0.5
0.5
0.3
0.3
0.3
Front to back ratio (dB) 180°±30° copolar
>27
>27
>27
>27
>27
Front to back ratio (dB) 180°±30° total power
>24
>24
>24
>24
>24
Cross polar discrimination (XPD) 0° (dB)
15
15
20
20
20
Cross polar discrimination (XPD) ±60° (dB)
10
8
7
>7
>7
<0.48
<0.62
<0.62
<0.62
Far field coupling
<0.33
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-153
<-153
-
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1408x280x125mm (4’7”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
17.6 (39)
Weight, without brackets, kg (lbs)
12.1 (27)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
GRP
Packet size, HxWxD, mm (ft)
1550x355x255 (5’1”x1’2”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
21.5 (47.3)
RET
8210.40, 8210.10, 8220.40, 8220.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Mar 19 2010
Updated: 2009-07-28
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
309
POWERWAVE
Dual Broadband Antennas
7750.0S0.0000.00
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.2/13.1, 18/15.9
TILT: MET
LENGTH: 1.4m (4’7”)
Dual Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
1710-2170
Frequency band (MHz)
824-896
880-960
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
14.6/12.5
15.2/13.1
17.5/15.4
17.7/15.6
18/15.9
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Dual linear ±45°
50
50
<1.5:1
<1.5:1
69
67
65
65
62
14.9
13.7
6.9
6.6
6.2
>18,17,16,16,15,15@
>18,17,16,16,15,15@
>18,18,16,15,14@
>18,18,16,15,14@
>18,18,16,15,14@
2,4,6,8,10,12°
2,4,6,8,10,12°
2,4,6,8°
2,4,6,8°
2,4,6,8°
30
30
30
30
30
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
2 to 8
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0 to 8
40
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<2.0
<2.0
<2.0
First null fill (dB)
<-25
<-25
<-25
<-25
<-25
Vertical beam squint (°)
0.5
0.5
0.3
0.3
0.3
Front to back ratio (dB) 180°±30° copolar
>27
>27
>27
>27
>27
Front to back ratio (dB) 180°±30° total power
>24
>24
>24
>24
>24
Cross polar discrimination (XPD) 0° (dB)
15
15
20
20
20
Cross polar discrimination (XPD) ±60° (dB)
10
8
7
>7
>7
<0.48
<0.62
<0.62
<0.62
Far field coupling
<0.33
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-153
<-153
-
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
600
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1408x280x125mm (4’7”x11”x4”)
Mounting
No brackets
Weight, with brackets, kg (lbs)
NA
Weight, without brackets, kg (lbs)
12.1 (27)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Package size, HxWxD, mm (ft)
1550x355x255 (5’1”x1’2”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
16 (35.3)
RET
8210.40, 8210.10, 8220.40, 8220.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08203 Rev. A
Updated: 2009-07-28
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
310
POWERWAVE
Dual Broadband Antennas
7750.90
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.2/13.1, 18/15.9
TILT: MET
LENGTH: 1.4m (4’7”)
Dual Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
1710-2170
Frequency band (MHz)
824-896
880-960
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
14.6/12.5
15.2/13.1
17.5/15.4
17.7/15.6
18/15.9
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
50
50
<1.5:1
<1.5:1
69
67
65
65
62
14.9
13.7
6.9
6.6
6.2
>18,17,16,16,15,15@
>18,17,16,16,15,15@
>18,18,16,15,14@
>18,18,16,15,14@
>18,18,16,15,14@
2,4,6,8,10,12°
2,4,6,8,10,12°
2,4,6,8°
2,4,6,8°
2,4,6,8°
30
30
30
30
30
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
Dual linear ±45°
2 to 12
Isolation between inputs (dB)
Inter band Isolation (dB)
0 to 8
40
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<2.0
<2.0
<2.0
First null fill (dB)
<-25
<-25
<-25
<-25
<-25
Vertical beam squint (°)
0.5
0.5
0.3
0.3
0.3
Front to back ratio (dB) 180°±30° copolar
>27
>27
>27
>27
>27
Front to back ratio (dB) 180°±30° total power
>24
>24
>24
>24
>24
Cross polar discrimination (XPD) 0° (dB)
15
15
20
20
20
Cross polar discrimination (XPD) ±60° (dB)
10
8
7
>7
>7
<0.48
<0.62
<0.62
<0.62
Far field coupling
<0.33
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-153
<-153
-
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
600
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1408x280x125mm (4’7”x11”x4”)
Mounting
Pre mounted fixed tilt brackets
Weight, with brackets, kg (lbs)
15.6 (34.4)
Weight, without brackets, kg (lbs)
12.1 (27)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Packet size, HxWxD, mm (ft)
1550x355x255 (5’1”x1’2”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
19.5 (43)
RET
8210.40, 8210.10, 8220.40, 8220.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08201 Rev. A
Updated: 2009-07-28
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
311
POWERWAVE
Dual Broadband Antennas
7752.90
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.7/14.6, 17.6/15.5
TILT: MET
LENGTH: 2.0m (6’6”)
Dual Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
1710-2170
Frequency band (MHz)
824-896
880-960
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
15.8/13.7
16.7/14.6
17.1/15
17.3/15.2
17.6/15.5
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
1.5:1
1.5:1
Horizontal beam width, -3 dB (°)
71
67
63
63
61
Vertical beam width, -3 dB (°)
9.6
8.9
7.1
6.6
6.3
>17,16,15,14@
>17,16,15,14@
>17,16,15,14,13@
>18,18,16,15,14@
>20,19,19,18,17@
2,4,6,8°
2,4,6,8°
2,4,6,8°
2,4,6,8°
2,4,6,8°
30
30
30
30
30
Electrical down tilt (°)
2 to 9
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0 to 8
40
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<2.0
<2.0
<3.0
First null fill (dB)
<-25
<-25
<-25
<-25
<-25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.4
Front to back ratio (dB) 180°±30° copolar
>27
>27
>27
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
>25
>25
>25
Cross polar discrimination (XPD) 0° (dB)
16
15
16
16
16
Cross polar discrimination (XPD) ±60° (dB)
> 12
> 9.5
> 6.2
> 6.5
> 7.5
Far field coupling
<0.26
<0.39
<0.5
<0.59
<0.59
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-153
<-153
-
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2033x280x125mm (6’8”x11”x4”)
Mounting
Pre-mounted fixed tilt bracket
Weight, with brackets, kg (lbs)
16.0 (35)
Weight, without brackets, kg (lbs)
19.8 (44)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Packet size, HxWxD, mm (ft)
2175x355x255 (7’2”x14”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
27 (59.5)
RET
8210.40, 8210.10, 8220.40, 8220.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08202 Rev. A
Updated: 2009-07-28
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
312
POWERWAVE
Dual Broadband Antennas
7752.00
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.7/14.6, 17.6/15.5
TILT: 2-9°/0-8°
LENGTH: 2.0m (6’6”)
Dual Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
1710-2170
Frequency band (MHz)
824-896
870-960
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
15.8/13.7
16.7/14.6
17.1/15
17.3/15.2
17.6/15.5
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
1.5:1
1.5:1
Horizontal beam width, -3 dB (°)
71
67
63
63
61
Vertical beam width, -3 dB (°)
9.6
8.9
7.1
6.6
6.3
>17,16,15,14@
>17,16,15,14@
>17,16,15,14,13@
>18,18,17,16,16@
>20,19,19,18,17@
2,4,6,8°
2,4,6,8°
2,4,6,8°
2,4,6,8°
2,4,6,8°
30
30
30
30
30
Electrical down tilt (°)
2-9
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0-8
40
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<2.0
<2.0
<3
First null fill (dB)
<-25
<-25
<-25
<-25
<-25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.4
Front to back ratio (dB) 180°±30° copolar
>27
>27
>27
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
>25
>25
>25
Cross polar discrimination (XPD) 0° (dB)
16
15
16
16
16
Cross polar discrimination (XPD) ±60° (dB)
> 12
> 9.5
> 6.2
> 6.5
> 7.5
Far field coupling
<0.26
<0.39
<0.5
<0.59
<0.59
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-153
<-153
-
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2033x280x125mm (6’8”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
19.8 (44)
Weight, without brackets, kg (lbs)
16.0 (35)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
70 (156)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
GRP
Packet size, HxWxD, mm (ft)
2175x355x255 (7’2”x14”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
27 (59.5)
RET
8210.40, 8210.10, 8220.40, 8220.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Mar 19 2010
Updated: 2010-11-03
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
313
POWERWAVE
Dual Broadband Antennas
7752.0S0.0000.00
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.7/14.6, 17.6/15.5
TILT: MET
LENGTH: 2.0m (6’6”)
Dual Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
1710-2170
Frequency band (MHz)
824-896
880-960
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
15.8/13.7
16.7/14.6
17.1/15
17.3/15.2
17.6/15.5
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
1.5:1
1.5:1
Horizontal beam width, -3 dB (°)
71
67
63
63
61
Vertical beam width, -3 dB (°)
9.6
8.9
7.1
6.6
6.3
>17,16,15,14@
>17,16,15,14@
>17,16,15,14,13@
>18,18,16,15,14@
>20,19,19,18,17@
2,4,6,8°
2,4,6,8°
2,4,6,8°
2,4,6,8°
2,4,6,8°
30
30
30
30
30
Electrical down tilt (°)
2 to 9
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0 to 8
40
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<2.0
<2.0
<3.0
First null fill (dB)
<-25
<-25
<-25
<-25
<-25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.4
Front to back ratio (dB) 180°±30° copolar
>27
>27
>27
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
>25
>25
>25
Cross polar discrimination (XPD) 0° (dB)
16
15
16
16
16
Cross polar discrimination (XPD) ±60° (dB)
> 12
> 9.5
> 6.2
> 6.5
> 7.5
Far field coupling
<0.26
<0.39
<0.5
<0.59
<0.59
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-153
<-153
-
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2033x280x125mm (6’8”x11”x4”)
Mounting
No brackets
Weight, with brackets, kg (lbs)
NA
Weight, without brackets, kg (lbs)
16.0 (35)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Package size, HxWxD, mm (ft)
2175x355x255 (7’2”x14”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
27 (59.5)
RET
8210.40, 8210.10, 8220.40, 8220.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08202 Rev. A
Updated: 2009-07-28
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
314
POWERWAVE
Dual Broadband Antennas
7755.00
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.3/15.2, 17.8/15.7
TILT: 2-8°/0-8°
LENGTH: 2.6m (8’6”)
Dual Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
1710-2170
Frequency band (MHz)
824-896
870-960
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
16.6/14.5
17.3/15.2
17.3/15.2
17.6/15.5
17.8/15.7
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
1.5:1
1.5:1
Horizontal beam width, -3 dB (°)
71
67
65
65
62
Vertical beam width, -3 dB (°)
7.4
7
6.9
6.4
6.1
>18,18,17,16,16@
>18,18,17,16,16@
>17,16,15,14,13@
>17,17,16,15,14@
>17,17,16,15,14@
2,4,6,8°
2,4,6,8°
2,4,6,8°
2,4,6,8°
2,4,6,8°
30
30
30
30
30
Electrical down tilt (°)
2-8
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0-8
38
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.5
<1
<3.5
First null fill (dB)
<-25
<-25
<-25
<-25
<-25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
>25
>25
>25
Cross polar discrimination (XPD) 0° (dB)
16
14
16
16
16
Cross polar discrimination (XPD) ±60° (dB)
>11
> 9.5
> 6.3
>7.2
>7.5
Far field coupling
<0.3
<0.41
<0.53
<0.58
<0.58
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-150
<-150
-
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
600
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2658x280x125mm (8’8”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
25.1 (55)
Weight, without brackets, kg (lbs)
19.6 (43)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
GRP
Packet size, HxWxD, mm (ft)
2800x355x255 (9’2”x1’2”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
32.5 (71.6)
RET
8210.40, 8210.10, 8220.40, 8220.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Mar 19 2010
Updated: 2009-07-28
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
315
POWERWAVE
Dual Broadband Antennas
7755.90
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.3/15.2, 17.8/15.7
TILT: MET
LENGTH: 2.6m (8’6”)
Dual Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
1710-2170
Frequency band (MHz)
824-896
880-960
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
16.6/14.5
17.3/15.2
17.3/15.2
17.6/15.5
17.8/15.7
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
71
67
65
65
62
Vertical beam width, -3 dB (°)
7.4
7
6.9
6.4
6.1
18,18,17,16,16@
18,18,17,16,16@
>17,16,15,14,13@
>17,17,16,15,14@
>17,17,16,15,14@
2,4,6,8°
2,4,6,8°
2,4,6,8°
2,4,6,8°
2,4,6,8°
30
30
30
30
30
Electrical down tilt (°)
2 to 8
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0 to 8
40
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.5
<1.0
<3.5
First null fill (dB)
<-25
<-25
<-25
<-25
<-25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
>25
>25
>25
Cross polar discrimination (XPD) 0° (dB)
16
14
16
16
16
Cross polar discrimination (XPD) ±60° (dB)
>11
>9.5
> 6.3
>7.2
>7.5
Far field coupling
<0.3
<0.41
<0.53
<0.58
<0.58
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-150
<-150
-
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
600
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2658x280x125mm (8’8”x11”x4”)
Mounting
Pre-mounted fixed tilt bracket
Weight, with brackets, kg (lbs)
23.1 (51)
Weight, without brackets, kg (lbs)
19.6 (43)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Packet size, HxWxD, mm (ft)
2800x355x255 (9’2”x1’2”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
30.5 (67.1)
RET
8210.40, 8210.10, 8220.40, 8220.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08203 Rev. A
Updated: 2009-07-28
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
316
POWERWAVE
Very Low Broadband Antennas
7755.0S0.0000.00
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.3/15.2, 17.8/15.7
TILT: MET
LENGTH: 2.6m (8’6”)
Dual Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
Frequency band (MHz)
824-896
Gain (dBi/dBd)
16.6/14.5
Polarization
1710-1880
17.3/15.2
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.5:1
Horizontal beam width, -3 dB (°)
71
65
Vertical beam width, -3 dB (°)
7.4
6.9
Electrical down tilt (°)
2 to 8
Side lobe suppression, vertical 1st upper (dB)
>18,18,17,16,16@
>17,16,15,14,13@
<1.0
<1.5
Tracking, horizontal plane ±60° (dB)
Isolation between inputs (dB)
First null fill (dB)
30
30
<-25
<-25
Vertical beam squint (°)
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
16
16
Cross polar discrimination (XPD) ±60° (dB)
>11
> 6.3
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
300
Power handling, average total (W)
600
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, in (mm)
2658x280x125mm (8’8”x11”x4”)
Mounting
No brackets
Weight, with brackets, lbs (kg)
NA
Weight, without brackets, lbs (kg)
19.6 (43)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
880
Maximum operational wind speed, mph (m/s)
42 (93)
Survival wind speed, mph (m/s)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Packet size, HxWxD, in (mm)
2800x355x255 (9’2”x1’2”x10”)
Radome colour
Light Grey
Shipping weight, lbs (kg)
32.5 (71.6)
RET
8210.40, 8210.10, 8220.40, 8220.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08203 Rev. A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2009-07-28
317
Triple Broadband Antennas
POWERWAVE
Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz
Triple Broadband Antennas
Cross Polarized
Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz
Horizontal
Beamwidth
65
65
65
65
Gain dBi dBd
16.2/14.1, 16.5/14.4,
16.5/14.4
14.7/12.6, 14.6/12.5,
14.6/12.5
16.2/14.1, 16.5/14.4,
16.5/14.4
17.3/15.2, 17.9/15.8,
17.9/15.8
Tilt
Length
Part Number
2-9°/0-10°/0-10°
2.0m (6’6”)
5782.00
319
MET
1.4m (4’7”)
7780.00
320
MET
2.0m (6’6”)
7782.00
321
MET
2.6m (8’6”)
7785.00
322
318
Page
POWERWAVE
Triple Broadband Antennas
5782.00
POLARIZATION: XXX-pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 2-9°/0-10°/0-10°
LENGTH: 2.0m (6’6”)
Triple Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
824-896
870-960
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
15.8/13.7
16.2/14.1
16.0/13.9
16.1/14.0
16.5/14.4
Polarization
Dual Linear +/- 45
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual Linear +/- 45
50
50
< 1.5:1
< 1.5:1
Horizontal beam width, -3 dB (°)
71
67
65
65
63
Vertical beam width, -3 dB (°)
9.6
8.6
10
9.4
8.7
>18,17,16,16@
> 18, 17, 16, 16@
> 17, 15, 13@
> 17, 15, 14@
> 17, 16, 15@
2,5,7,9 degree
2,5,7,9 degree
0, 6, 10 degree
0, 6, 10 degree
0, 6, 10 degree
> 30
> 30
> 30
> 30
Electrical down tilt (°)
2-9
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
0 - 10
> 30
Inter band Isolation (dB)
> 34
> 34
Tracking, horizontal plane ±60° (dB)
<1
<1
< 1.5
<2
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
> 28
> 30
> 27
> 28
> 30
Front to back ratio (dB) 180°±30° total power
> 26
> 26
> 25
> 27
> 27
16
15
16
16
15
> 11
>9
>7
>6
>6
< 0.47
< 0.52
< 0.66
< 0.66
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
< 0.27
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
< -153
< -153
-
< -160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
<4
MECHANICAL SPECIFICATIONS*
Connector
6 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2033x280x125 (6’8”x11”x4”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
23.4 (48)
Weight, without brackets, kg (lbs)
17.9 (39)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC Ground
Operating Temperature
-40°C to +60°C
Radome material
PVC
Package size, HxWxD, mm (ft)
2175x355x255 (7’2”x14”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
28 (61.7)
RET
8210.40, 8210.10, 8230.40, 8230.10
Brackets
7256.00, 7454.00, 2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Mar 19 2010
Updated: 2009-08-02
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
319
POWERWAVE
Triple Broadband Antennas
7780.00
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.7/12.6, 14.8/12.7, 14.8/12.7
TILT: 2-12°/0-12°/0-12°
LENGTH: 1.4m (4’7”)
Triple Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
824-896
870-960
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
14.1/12
14.7/12.6
14.4/12.3
14.6/12.5
14.8/12.7
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Dual linear ±45°
50
50
1.5:1
1.5:1
71
67
65
64
64
14.9
13.9
13.3
12.6
12.0
>18,17,16,16@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
2,4,8,12°
2,4,8,12°
0,4,8,12°
0,4,8,12°
0,4,8,12°
30
30
30
30
>30
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
2 - 12
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0 - 12
38
38
Tracking, horizontal plane ±60° (dB)
<1
<2
<1.5
<1.2
<4
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.7
0.7
0.7
1
1
Front to back ratio (dB) 180°±30° copolar
>27
>28
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>24
>24
>24
>24
>24
Cross polar discrimination (XPD) 0° (dB)
15
14
16
18
18
Cross polar discrimination (XPD) ±60° (dB)
> 9.3
>7.7
>6
>5.5
> 5.5
Far field coupling
< 0.35
< 0.50
< 0.55
< 0.74
< 0.74
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
-153
-
-
-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1408x280x125mm (4’7”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
19 (42)
Weight, without brackets, kg (lbs)
13.5 (30)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
GRP
Package size, HxWxD, mm (ft)
1550x355x200 (5’1”x1’2”x7”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
23 (50.7)
RET
8210.40, 8210.10, 8230.40, 8230.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Mar 19 2010
Updated: 2009-07-27
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
320
POWERWAVE
Triple Broadband Antennas
7782.00
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 2-9°/0-10°/0-10°
LENGTH: 2.0m (6’6”)
Triple Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
824-896
870-960
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
15.8/13.7
16.2/14.1
16.0/13.9
16.1/14
16.5/14.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
1.5:1
1.5:1
Horizontal beam width, -3 dB (°)
71
67
65
65
63
Vertical beam width, -3 dB (°)
9.6
8.6
10
9.4
8.7
>18,17,16,16@
>18,17,16,16@
>17,15,13@
>17,15,14@
>17,16,15@
2,5,7,9°
2,5,7,9°
0,6,10°
0,6,10°
0,6,10°
>30
>30
>30
>30
>30
Electrical down tilt (°)
2-9
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0 - 10
>34
Tracking, horizontal plane ±60° (dB)
>34
<1.0
<1
<1.5
<2
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>30
>27
>28
>30
Front to back ratio (dB) 180°±30° total power
>26
>26
>25
>27
>27
Cross polar discrimination (XPD) 0° (dB)
16
15
16
16
15
Cross polar discrimination (XPD) ±60° (dB)
>11
>9.2
>6.7
>6.3
>6.3
<0.47
<0.52
<0.66
<0.66
Far field coupling
<0.27
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-153
-
-
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
<4
MECHANICAL SPECIFICATIONS*
Connector
6 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2033x280x125mm (6’8”x11”x4”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
23.4 (48)
Weight, without brackets, kg (lbs)
17.9 (39)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
67 (150)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
GRP
Package size, HxWxD, mm (ft)
2175x355x255 (7’2”x14”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
28 (61.7)
RET
8210.40, 8210.10, 8230.40, 8230.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Mar 19 2010
Updated: 2009-07-27
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
321
POWERWAVE
Triple Broadband Antennas
7785.00
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.3/15.2, 17.9/15.8, 17.9/15.8
TILT: 2-8°/0-8°/0-8°
LENGTH: 2.6m (8’6”)
Triple Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
824-896
870-960
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
16.7/14.6
17.3/15.2
17.3/15.2
17.5/15.4
17.9/15.8
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
1.5:1
1.5:1
Horizontal beam width, -3 dB (°)
71
67
66
65
62
Vertical beam width, -3 dB (°)
7.4
6.9
6.7
6.4
6.2
>17,16,15,14@
>17,16,15,14@
>17,16,15,14,13@
>17,16,15,14,13@
>17,16,16,15,15@
2,4,6,8°
2,4,6,8°
0,2,4,6,8°
0,2,4,6,8°
0,2,4,6,8°
30
30
>30
30
>30
Electrical down tilt (°)
2-8
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0-8
38
38
Tracking, horizontal plane ±60° (dB)
<1
<1
<1.1
<1.0
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>28
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
>27
>25
Cross polar discrimination (XPD) 0° (dB)
16
15
16
15
17
Cross polar discrimination (XPD) ±60° (dB)
>12
>9.5
>7.0
>7.5
>7.7
<0.44
<0.47
<0.52
<0.52
Far field coupling
<0.24
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
-153
-
-
-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
<2.9
MECHANICAL SPECIFICATIONS*
Connector
6 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2658x280x125mm (8’8”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
27.7 (61)
Weight, without brackets, kg (lbs)
22.2 (49)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
GRP
Package size, HxWxD, mm (ft)
2800x355x255 (9’2”x1’2”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
33 (72.7)
RET
8210.40, 8210.10, 8230.40, 8230.10
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Mar 19 2010
Updated: 2009-07-23
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
322
Power wave
Single and Dual Band Antennas
The Powerwave single band antenna’s outstanding
performance in the field derives from excellent voltage
standing wave ratio (VSWR), isolation beam squint and
tracking. This design ensures minimized intermodulation
products, thus substantially enhancing system benefits.
The Powerwave polarization diversity systems use one
antenna with two orthogonal polarizations slanted at ±45°
to provide the independently fading signals needed for
achieving top- quality coverage. As a result of thorough,
in-depth research and testing, Powerwave has produced
a variety of designs that ensure the isolation, cross
polarization discrimination and orthogonality between inputs
needed to achieve the highest possible diversity gain,
hence the most efficient system performance.
Single and Dual Band Antennas
POWERWAVE
Single and Dual Band Antennas
Single Band Antennas
Cross Polarized
Page
ALX Cross Polarized Antennas, 806-896 MHz
325
X-Urban Cross Polarized Antennas, 824-896/870-960 MHz
327
Vertical Polarized
Page
Omni Vertical Cross Polarized Antennas, 806-896 MHz
347
Urban Vertical Polarized Antennas, 824-896/870-960 MHz
355
Dual Band Antennas
Cross Polarized
Page
ALXC Cross Polarized Antennas, 870-960/1710-1880 MHz
379
DBB90 Cross Polarized Antennas, 824-896/1710-2170 MHz
390
Vertical Polarized
Page
ALVC Vertical Polarized Antennas, , 806-896/1850-1990 MHz
324
394
Single Band Antennas
POWERWAVE
ALX Cross Polarized Antennas, 806-896 MHz
Single Band Antennas
Cross Polarized
ALX Cross Polarized Antennas, 806-896 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
90
10.5/8.4
FET
0.7m (2'3")
7390.00B
326
325
POWERWAVE
Single Band Antennas
7390.00B
POLARIZATION: X-Pol
FREQUENCY (MHz): 806-896
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 10.5/8.4
TILT: FET
LENGTH: 0.7m (2’3”)
ALX Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-896
Frequency band (MHz)
806-896
Gain (dBi/dBd)
10.5/8.4
Polarization
Linear slanted
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
90
Vertical beam width, -3 dB (°)
29
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>13
Isolation between inputs (dB)
30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<2
Front to back ratio (dB) 180°±30° copolar
>19
Front to back ratio (dB) 180°±30° total power
>17
Cross polar discrimination (XPD) 0° (dB)
>13
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
710x280x125 (2’4”x11”x5”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
7.7
Weight, without brackets, kg (lbs)
4
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
189
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Package size, HxWxD, mm (ft)
850x355x200 (2’9”x1’2”x10”)
Shipping weight, kg (lbs)
6.5 (141)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08018 Rev A
Updated: 2010-03-31
326
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Single Band Antennas
POWERWAVE
X-Urban Cross Polarized Antennas, 824-896/870-960 MHz
Single Band Antennas
Cross Polarized
X-Urban Cross Polarized Antennas, 824-896/870-960 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
65
12.5/10.4
FET
0.7m (2'3")
7216.03
328
65
12.5/10.4
FET
0.7m (2'3")
7282.03
329
65
14.5/12.4
FET
1.3m (4'3")
7217.11
330
65
15.5/13.4
FET
1.3m (4'3")
7217.04
331
65
15/12.9
FET
1.3m (4'3")
7217.03
332
65
15/12.9
FET
1.3m (4'3")
7263.01
333
65
15/12.9
FET
1.3m (4'3")
7263.04
334
65
16.5/14.4
FET
1.9m (6'2")
7255.03
335
65
16.5/14.4
FET
1.9m (6'2")
7281.02
336
65
16.5/14.4
FET
1.9m (6'2")
7281.04
337
65
17.5/15.4
FET
2.6m (8'6")
7218.03
338
65
17.5/15.4
FET
2.6m (8'6")
7218.04
339
65
17.5/15.4
FET
2.6m (8'6")
7218.13
340
65
17.5/15.4
FET
2.6m (8'6")
7218.14
341
65
17/14.9
FET
1.9m (6'2")
7255.04
342
65
18/15.9
FET
2.6m (8'6")
7218.05
343
65
18/15.9
FET
2.6m (8'6")
7218.09
344
65
18/15.9
FET
2.6m (8'6")
7218.15
345
65
18/15.9
FET
2.6m (8'6")
7218.19
346
327
POWERWAVE
Single Band Antennas
7216.03
POLARIZATION: X-Pol
FREQUENCY (MHz): 880-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 12.5/10.4
TILT: FET
LENGTH: 0.7m (2’3”)
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
880-960
Frequency range (MHz)
Frequency band (MHz)
880-960
Gain (dBi/dBd)
12.5/10.4
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
26
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>10
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.3
Front to back ratio (dB) 180°±30° copolar
>24
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
660x256x50 (2’2”x10’x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
7.3 (16)
Weight, without brackets, kg (lbs)
3.6 (7.9)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
222
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Package size, HxWxD, mm (ft)
770x308x121 (2’6”x1’x5’)
Shipping weight, kg (lbs)
7.5 (16.5)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08069 Rev A
Updated: 2010-03-31
328
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7282.03
POLARIZATION: X-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 12.5/10.4
TILT: FET
LENGTH: 0.7m (2’3”)
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
824-896
Frequency range (MHz)
Frequency band (MHz)
824-896
Gain (dBi/dBd)
12.5/10.4
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
25
Electrical down tilt (°)
4
Side lobe suppression, vertical 1st upper (dB)
>9
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.3
Front to back ratio (dB) 180°±30° copolar
>22
Front to back ratio (dB) 180°±30° total power
>18
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
660x256x50 (2’2”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
7.7 (16.9)
Weight, without brackets, kg (lbs)
4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
222
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
750x308x121 (2’6”x1’x5’)
Shipping weight, kg (lbs)
5 (11)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08142 Rev A
Updated: 2010-03-31
329
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7217.11
POLARIZATION: X-Pol
FREQUENCY (MHz): 880-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.5/12.4
TILT: FET
LENGTH: 1.3m (4’3”)
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
880-960
Frequency range (MHz)
Frequency band (MHz)
880-960
Gain (dBi/dBd)
14.5/12.4
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
13
Electrical down tilt (°)
9
Side lobe suppression, vertical 1st upper (dB)
>14
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.3
Front to back ratio (dB) 180°±30° copolar
>23
Front to back ratio (dB) 180°±30° total power
>19
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x256x50 (4’4”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
8.5 (18.7)
Weight, without brackets, kg (lbs)
4.8 (10.5)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
1430x308x121 (4’8”x1’x5”)
Shipping weight, kg (lbs)
10 (22)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08072 Rev A
Updated: 2010-03-31
330
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7217.04
POLARIZATION: X-Pol
FREQUENCY (MHz): 880-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.5/13.4
TILT: FET
LENGTH: 1.3m (4’3”)
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
880-960
Frequency range (MHz)
Frequency band (MHz)
880-960
Gain (dBi/dBd)
15.5/13.4
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
13
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>14
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.3
Front to back ratio (dB) 180°±30° copolar
>24
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x256x50 (4’4”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
8.5 (18.7)
Weight, without brackets, kg (lbs)
4.8 (10.5)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
1430x308x121 (4’8”x1’x5”)
Shipping weight, kg (lbs)
10 (22)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08071 Rev A
Updated: 2010-03-31
331
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7217.03
POLARIZATION: X-Pol
FREQUENCY (MHz): 880-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15/12.9
TILT: FET
LENGTH: 1.3m (4’3”)
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
880-960
Frequency band (MHz)
880-960
Gain (dBi/dBd)
15/12.9
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
13
Electrical down tilt (°)
7
Side lobe suppression, vertical 1st upper (dB)
>14
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.3
Front to back ratio (dB) 180°±30° copolar
>24
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x256x50 (4’4”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
8.5 (18.7)
Weight, without brackets, kg (lbs)
4.8 (10.5)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
1430x308x121 (4’8”x1’x5”)
Shipping weight, kg (lbs)
10 (22)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08070 Rev A
Updated: 2010-03-31
332
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7263.01
POLARIZATION: X-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15/12.9
TILT: FET
LENGTH: 1.3m (4’3”)
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-896
Frequency band (MHz)
824-896
Gain (dBi/dBd)
15/12.9
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
13
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>14
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.3
Front to back ratio (dB) 180°±30° copolar
>22
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x256x50 (52”x10.4”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
7.5 (16.5)
Weight, without brackets, kg (lbs)
7.5 (16.5)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
1430x308x121 (56”x12”x5”)
Shipping weight, kg (lbs)
8.5 (19)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08126 Rev A
Updated: 2010-03-31
333
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7263.04
POLARIZATION: X-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15/12.9
TILT: FET
LENGTH: 1.3m (4’3”)
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-896
Frequency band (MHz)
824-896
Gain (dBi/dBd)
15/12.9
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
13
Electrical down tilt (°)
6
Side lobe suppression, vertical 1st upper (dB)
>14
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.3
Front to back ratio (dB) 180°±30° copolar
>22
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x256x50 (52”x10.4”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
7.5 (16.5)
Weight, without brackets, kg (lbs)
7.5 (16.5)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
1430x308x121 (56”x12”x5”)
Shipping weight, kg (lbs)
8.5 (19)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08127 Rev A
Updated: 2010-03-31
334
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7255.03
POLARIZATION: X-Pol
FREQUENCY (MHz): 880-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.5/14.4
TILT: FET
LENGTH: 1.9m (6’2”)
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
880-960
Frequency range (MHz)
Frequency band (MHz)
880-960
Gain (dBi/dBd)
16.5/14.4
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
9
Electrical down tilt (°)
6
Side lobe suppression, vertical 1st upper (dB)
>15
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.3
Front to back ratio (dB) 180°±30° copolar
>24
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1940x256x50 (6’4”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
14.2 (31.3)
Weight, without brackets, kg (lbs)
10.5 (23.1)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
794
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2050x308x121 (6’9”x1’x5’)
Shipping weight, kg (lbs)
12 (26.5)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08081 Rev A
Updated: 2010-03-31
335
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7281.02
POLARIZATION: X-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.5/14.4
TILT: FET
LENGTH: 1.9m (6’2”)
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
824-896
Frequency range (MHz)
Frequency band (MHz)
824-896
Gain (dBi/dBd)
16.5/14.4
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
9
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>15
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.3
Front to back ratio (dB) 180°±30° copolar
>24
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1940x256x50 (6’4”x10”x2”)
Mounting
Pre-mounted heavy duty bracket
Weight, with brackets, kg (lbs)
14.5 (31.9)
Weight, without brackets, kg (lbs)
9 (19.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
794
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2050x308x121 (6’9”x1’x5’)
Shipping weight, kg (lbs)
10 (22)
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08132 Rev A
Updated: 2010-03-31
336
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7281.04
POLARIZATION: X-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.5/14.4
TILT: FET
LENGTH: 1.9m (6’2”)
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
824-896
Frequency range (MHz)
Frequency band (MHz)
824-896
Gain (dBi/dBd)
16.5/14.4
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
9
Electrical down tilt (°)
6
Side lobe suppression, vertical 1st upper (dB)
>14
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.3
Front to back ratio (dB) 180°±30° copolar
>24
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1940x256x50 (6’4”x10”x2”)
Mounting
Pre-mounted heavy duty bracket
Weight, with brackets, kg (lbs)
14.5 (31.9)
Weight, without brackets, kg (lbs)
9 (19.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
794
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2050x308x121 (6’9”x1’x5’)
Shipping weight, kg (lbs)
10 (22)
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08223Rev A
Updated: 2010-03-31
337
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7218.03
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.5/15.4
TILT: FET
LENGTH: 2.6m (8’6”)
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
870-960
Frequency range (MHz)
Frequency band (MHz)
870-960
Gain (dBi/dBd)
17.5/15.4
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
6
Side lobe suppression, vertical 1st upper (dB)
>17
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.5
Front to back ratio (dB) 180°±30° copolar
>24
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x256x50 (8’6”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
20.2 (44.5)
Weight, without brackets, kg (lbs)
14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2690x308x121 (8’10”x1’x5’)
Shipping weight, kg (lbs)
18 (39.7)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08073 Rev A
Updated: 2010-03-31
338
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7218.04
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.5/15.4
TILT: FET
LENGTH: 2.6m (8'6")
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
870-960
Frequency range (MHz)
Frequency band (MHz)
870-960
Gain (dBi/dBd)
17.5/15.4
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
4
Side lobe suppression, vertical 1st upper (dB)
>17
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.5
Front to back ratio (dB) 180°±30° copolar
>24
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x256x50 (8'6"x10"x2")
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
20.2 (44.5)
Weight, without brackets, kg (lbs)
14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2690x308x121 (8'10"x1'x5')
Shipping weight, kg (lbs)
18 (39.7)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08074 Rev A
Updated: 2009-07-28
339
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7218.13
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.5/15.4
TILT: FET
LENGTH: 2.6m (8'6")
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
870-960
Frequency range (MHz)
Frequency band (MHz)
870-960
Gain (dBi/dBd)
17.5/15.4
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
6
Side lobe suppression, vertical 1st upper (dB)
>18
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.5
Front to back ratio (dB) 180°±30° copolar
>24
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x256x50 (8'6"x10"x2")
Mounting
Pre-mounted heavy duty bracket
Weight, with brackets, kg (lbs)
22.3 (49.1)
Weight, without brackets, kg (lbs)
16.8 (37)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2690x308x121 (8'10"x1'x5')
Shipping weight, kg (lbs)
18 (39.7)
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08077 Rev A
Updated: 2009-07-28
340
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7218.14
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.5/15.4
TILT: FET
LENGTH: 2.6m (8’6”)
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
870-960
Frequency range (MHz)
Frequency band (MHz)
870-960
Gain (dBi/dBd)
17.5/15.4
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
4
Side lobe suppression, vertical 1st upper (dB)
>18
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.5
Front to back ratio (dB) 180°±30° copolar
>24
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x256x50 (8’6”x10”x2”)
Mounting
Pre-mounted heavy duty bracket
Weight, with brackets, kg (lbs)
22.3 (49.1)
Weight, without brackets, kg (lbs)
16.8 (37)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2690x308x121 (8’10”x1’x5’)
Shipping weight, kg (lbs)
18 (39.7)
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08078 Rev A
Updated: 2010-03-31
341
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7255.04
POLARIZATION: X-Pol
FREQUENCY (MHz): 880-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17/14.9
TILT: FET
LENGTH: 1.9m (6’2”)
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
880-960
Frequency band (MHz)
880-960
Gain (dBi/dBd)
17/14.9
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
9
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>17
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.3
Front to back ratio (dB) 180°±30° copolar
>24
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1940x256x50 (6’4”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
14.2 (31.3)
Weight, without brackets, kg (lbs)
10.5 (23.1)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
794
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2050x308x121 (6’9”x1’x5’)
Shipping weight, kg (lbs)
12 (26.5)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08082 Rev A
Updated: 2010-03-31
342
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7218.05
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18/15.9
TILT: FET
LENGTH: 2.6m (8'6")
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
18/15.9
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>18
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.3
Front to back ratio (dB) 180°±30° copolar
>24
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x256x50 (8'6"x10"x2")
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
20.2 (44.5)
Weight, without brackets, kg (lbs)
14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2690x308x121 (8'10"x1'x5')
Shipping weight, kg (lbs)
18 (39.7)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
PN7218.05
Updated: 2009-07-28
343
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7218.09
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18/15.9
TILT: FET
LENGTH: 2.6m (8’6”)
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
18/15.9
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
2
Side lobe suppression, vertical 1st upper (dB)
>18
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.3
Front to back ratio (dB) 180°±30° copolar
>24
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x256x50 (8’6”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
20.2 (44.5)
Weight, without brackets, kg (lbs)
14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2690x308x121 (8’10”x1’x5’)
Shipping weight, kg (lbs)
18 (39.7)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08076 Rev A
Updated: 2010-03-31
344
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7218.15
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18/15.9
TILT: FET
LENGTH: 2.6m (8’6”)
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
18/15.9
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>18
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.3
Front to back ratio (dB) 180°±30° copolar
>24
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x256x50 (8’6”x10”x2”)
Mounting
Pre-mounted heavy duty bracket
Weight, with brackets, kg (lbs)
22.3 (49.1)
Weight, without brackets, kg (lbs)
16.8 (37)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2690x308x121 (8’10”x1’x5’)
Shipping weight, kg (lbs)
18 (39.7)
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08079 Rev A
Updated: 2010-03-31
345
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7218.19
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18/15.9
TILT: FET
LENGTH: 2.6m (8'6")
X-Urban Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
18/15.9
Polarization
Linear slanted ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
2
Side lobe suppression, vertical 1st upper (dB)
>18
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
-
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
-
Vertical beam squint (°)
<0.4
Front to back ratio (dB) 180°±30° copolar
>24
Front to back ratio (dB) 180°±30° total power
>20
Cross polar discrimination (XPD) 0° (dB)
>20
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
-
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x256x50 (8'6"x10"x2")
Mounting
Pre-mounted heavy duty bracket
Weight, with brackets, kg (lbs)
22.3 (49.1)
Weight, without brackets, kg (lbs)
16.8 (37)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2690x308x121 (8'10"x1'x5')
Shipping weight, kg (lbs)
18 (39.7)
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08080 Rev A
Updated: 2009-07-28
346
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Single Band Antennas
POWERWAVE
Omni Vertical Polarized Antennas, 806-896 MHz
Single Band Antennas
Vertical Polarized
Omni Vertical Polarized Antennas, 806-896 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
360
11/8.9
FET
3.14m (10'4")
4168.21.33.00
348
360
11/8.9
FET
3.14m (10'4")
4168.21.33.03
349
360
11/8.9
FET
3m (9‘10")
4168.11.33.00
350
360
11/8.9
FET
3m (9‘10")
4168.11.33.02
351
360
11/8.9
FET
3m (9‘10")
4168.11.33.03
352
360
11/8.9
FET
3m (9‘10")
4168.11.33.06
353
360
11/8.9
FET
3m (9‘10")
4168.11.33.52
354
347
POWERWAVE
Single Band Antennas
4168.21.33.00
POLARIZATION: V-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (°): 360
GAIN (dBi/dBd): 11/8.9
TILT: FET
LENGTH: 3.14m (10’4”)
Omni Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-896
Frequency band (MHz)
824-896
Gain (dBi/dBd)
11/8.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
360
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
12
First null fill (dB)
-
Vertical beam squint (°)
0.5
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
3140x78 (10’4”x3”)
Mounting
Pre-mounted bracket
Weight, with brackets, kg (lbs)
12.5 (27.5)
Weight, without brackets, kg (lbs)
11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
204
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
3300x150x170 (10’10”x6”x7”)
Shipping weight, kg (lbs)
16 (35.2)
Brackets
included
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08113 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-05
348
POWERWAVE
Single Band Antennas
4168.21.33.03
POLARIZATION: V-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (°): 360
GAIN (dBi/dBd): 11/8.9
TILT: FET
LENGTH: 3.14m (10’4”)
Omni Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-896
Frequency band (MHz)
824-896
Gain (dBi/dBd)
11/8.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
360
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
3
Side lobe suppression, vertical 1st upper (dB)
12
First null fill (dB)
-
Vertical beam squint (°)
0.5
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
3140x78 (10’4”x3”)
Mounting
Pre-mounted bracket
Weight, with brackets, kg (lbs)
12.5 (27.5)
Weight, without brackets, kg (lbs)
11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
204
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
3300x150x170 (10’10”x6”x7”)
Shipping weight, kg (lbs)
16 (35.2)
Brackets
included
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08114 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-05
349
POWERWAVE
Single Band Antennas
4168.11.33.00
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 360
GAIN (dBi/dBd): 11/8.9
TILT: FET
LENGTH: 3m (9‘10”)
Omni Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
11/8.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
360
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
12
First null fill (dB)
-
Vertical beam squint (°)
0.5
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
3000x78 (9‘10”x3”)
Mounting
Pre-mounted bracket
Weight, with brackets, kg (lbs)
12.5 (27.5)
Weight, without brackets, kg (lbs)
11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
194
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
3300x150x170 (10’10”x6”x7”)
Shipping weight, kg (lbs)
16 (35.2)
Brackets
included
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08105 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-05
350
POWERWAVE
Single Band Antennas
4168.11.33.02
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 360
GAIN (dBi/dBd): 11/8.9
TILT: FET
LENGTH: 3m (9‘10”)
Omni Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
11/8.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
360
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
2
Side lobe suppression, vertical 1st upper (dB)
12
First null fill (dB)
-
Vertical beam squint (°)
0.5
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
3000x78 (9‘10”x3”)
Mounting
Pre-mounted bracket
Weight, with brackets, kg (lbs)
12.5 (27.5)
Weight, without brackets, kg (lbs)
11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
194
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
3300x150x170 (10’10”x6”x7”)
Shipping weight, kg (lbs)
16 (35.2)
Brackets
included
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08109 RevA
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-05
351
POWERWAVE
Single Band Antennas
4168.11.33.03
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 360
GAIN (dBi/dBd): 11/8.9
TILT: FET
LENGTH: 3m (9‘10”)
Omni Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
11/8.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
360
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
3
Side lobe suppression, vertical 1st upper (dB)
12
First null fill (dB)
-
Vertical beam squint (°)
0.5
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
3000x78 (9‘10”x3”)
Mounting
Pre-mounted bracket
Weight, with brackets, kg (lbs)
12.5 (27.5)
Weight, without brackets, kg (lbs)
11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
194
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
3300x150x170 (10’10”x6”x7”)
Shipping weight, kg (lbs)
16 (35.2)
Brackets
included
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08106 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-05
352
POWERWAVE
Single Band Antennas
4168.11.33.06
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 360
GAIN (dBi/dBd): 11/8.9
TILT: FET
LENGTH: 3m (9‘10”)
Omni Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
11/8.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
360
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
6
Side lobe suppression, vertical 1st upper (dB)
12
First null fill (dB)
-
Vertical beam squint (°)
0.5
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
3000x78 (9‘10”x3”)
Mounting
Pre-mounted bracket
Weight, with brackets, kg (lbs)
12.5 (27.5)
Weight, without brackets, kg (lbs)
11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
194
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
3300x150x170 (10’10”x6”x7”)
Shipping weight, kg (lbs)
16 (35.2)
Brackets
included
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08107 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-05
353
POWERWAVE
Single Band Antennas
4168.11.33.52
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 360
GAIN (dBi/dBd): 11/8.9
TILT: FET
LENGTH: 3m (9‘10”)
Omni Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
11/8.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
360
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
2 uptilt
Side lobe suppression, vertical 1st upper (dB)
12
First null fill (dB)
-
Vertical beam squint (°)
0.5
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
3000x78 (9‘10”x3”)
Mounting
Pre-mounted bracket
Weight, with brackets, kg (lbs)
12.5 (27.5)
Weight, without brackets, kg (lbs)
11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
194
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
3300x150x170 (10’10”x6”x7”)
Shipping weight, kg (lbs)
16 (35.2)
Brackets
included
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08111 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-05
354
Single Band Antennas
POWERWAVE
Urban Vertical Polarized Antennas, 824-896/870-960 MHz
Single Band Antennas
Vertical Polarized
Urban Vertical Polarized Antennas, 824-896/870-960 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
65
12.5/10.4
FET
0.7m (2'3")
7270.02
356
65
13/10.9
FET
0.7m (2'3")
7225.04
357
65
15.5/13.4
FET
1.3m (4'3")
7226.03
358
65
15.5/13.4
FET
1.3m (4'3")
7226.04
359
65
15.5/13.4
FET
1.3m (4'3")
7271.02
360
65
15/12.9
FET
1.3m (4'3")
7271.03
361
65
17.5/15.4
FET
2.6m (8'6")
7273.03
362
65
17/14.9
FET
1.9m (6'2")
7227.14
363
65
17/14.9
FET
1.9m (6'2")
7227.04
364
65
17/14.9
FET
2m (6'6")
7272.02
365
65
18/15.9
FET
2.6m (8'6")
7228.03
366
65
18/15.9
FET
2.6m (8'6")
7228.04
367
65
18/15.9
FET
2.6m (8'6")
7228.06
368
65
18/15.9
FET
2.6m (8'6")
7228.08
369
65
18/15.9
FET
2.6m (8'6")
7273.02
370
90
12/9.9
FET
0.7m (2'3")
7230.04
371
90
14/11.9
FET
1.3m (4'3")
7231.04
372
90
14/11.9
FET
1.3m (4'3")
7231.06
373
90
15/12.9
FET
1.9m (6'2")
7232.04
374
90
15/12.9
FET
1.9m (6'2")
7232.07
375
90
16.5/14.4
FET
2.6m (8'6")
7233.04
376
90
16.5/14.4
FET
2.6m (8'6")
7233.06
377
90
16.5/14.4
FET
2.6m (8'6")
7233.08
378
355
POWERWAVE
Single Band Antennas
7270.02
POLARIZATION: V-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 12.5/10.4
TILT: FET
LENGTH: 0.7m (2’3”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
824-896
Frequency range (MHz)
Frequency band (MHz)
824-896
Gain (dBi/dBd)
12.5/10.4
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
28
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>10
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>24
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
300
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
660x256x50 (2’2”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
7.7 (16.9)
Weight, without brackets, kg (lbs)
4 (8.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
222
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
770x308x121 (2’6”x1’x5”)
Shipping weight, kg (lbs)
8.3 (18.2)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08048 Rev A
Updated: 2010-04-05
356
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7225.04
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 13/10.9
TILT: FET
LENGTH: 0.7m (2’3”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
13/10.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
26
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>9
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>25
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
300
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
660x256x50 (2’2”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
8.7 (19.1)
Weight, without brackets, kg (lbs)
5 (11)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
222
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
770x308x121 (2’6”x1’x5”)
Shipping weight, kg (lbs)
6 (13.2)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08054 Rev A
Updated: 2010-04-27
357
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7226.03
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.5/13.4
TILT: FET
LENGTH: 1.3m (4’3”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
870-960
Frequency range (MHz)
Frequency band (MHz)
870-960
Gain (dBi/dBd)
15.5/13.4
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
14
Electrical down tilt (°)
6
Side lobe suppression, vertical 1st upper (dB)
>17
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>25
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x256x50 (4’4”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
10.7 (23.5)
Weight, without brackets, kg (lbs)
7 (15.4)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
1430x308x121 (4’8”x1’x5”)
Shipping weight, kg (lbs)
8.5 (18)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08055 Rev A
Updated: 2010-04-28
358
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7226.04
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.5/13.4
TILT: FET
LENGTH: 1.3m (4’3”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
870-960
Frequency range (MHz)
Frequency band (MHz)
870-960
Gain (dBi/dBd)
15.5/13.4
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
14
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>17
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>23
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x256x50 (4’4”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
10.7 (23.5)
Weight, without brackets, kg (lbs)
7 (15.4)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
1430x308x121 (4’8”x1’x5”)
Shipping weight, kg (lbs)
8.5 (18)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08056 Rev A
Updated: 2010-04-05
359
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7271.02
POLARIZATION: V-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.5/13.4
TILT: FET
LENGTH: 1.3m (4’3”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
824-896
Frequency range (MHz)
Frequency band (MHz)
824-896
Gain (dBi/dBd)
15.5/13.4
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
14
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>17
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>24
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x256x50 (4’4”x10”x2“ )
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
10.7 (23.5)
Weight, without brackets, kg (lbs)
7 (15.4)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
1430x308x121 (4’8”x1’x5“)
Shipping weight, kg (lbs)
8.5 (18.7)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08049 Rev A
Updated: 2010-04-05
360
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7271.03
POLARIZATION: V-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15/12.9
TILT: FET
LENGTH: 1.3m (4’3”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-896
Frequency band (MHz)
824-896
Gain (dBi/dBd)
15/12.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
14
Electrical down tilt (°)
5
Side lobe suppression, vertical 1st upper (dB)
>15
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>24
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x256x50 (4’4”x10”x2“ )
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
10.7 (23.5)
Weight, without brackets, kg (lbs)
7 (15.4)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
493
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
1430x308x121 (4’8”x1’x5“)
Shipping weight, kg (lbs)
8.5 (18.7)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08050 Rev A
Updated: 2010-04-05
361
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7273.03
POLARIZATION: V-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.5/15.4
TILT: FET
LENGTH: 2.6m (8’6”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
824-896
Frequency range (MHz)
Frequency band (MHz)
824-896
Gain (dBi/dBd)
17.5/15.4
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
7
Electrical down tilt (°)
4
Side lobe suppression, vertical 1st upper (dB)
>17
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>22
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x256x50 (8’6”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
17.7 (39)
Weight, without brackets, kg (lbs)
14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2650x308x121 (8’8”x1’x5”)
Shipping weight, kg (lbs)
18.8 (41.4)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08128 Rev A
Updated: 2010-04-05
362
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
7227.14
Single Band Antennas
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17/14.9
TILT: FET
LENGTH: 1.9m (6’2”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
17/14.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
9
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>17
First null fill (dB)
>-13
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>23
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIM female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1940x256x50 (6’4”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
14.1 (31)
Weight, without brackets, kg (lbs)
10.4 (22.9)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1199
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2050x308x121 (6’9”x1’x5”)
Shipping weight, kg (lbs)
13 (29)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-04-05
363
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7227.04
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17/14.9
TILT: FET
LENGTH: 1.9m (6’2”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
17/14.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
9
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>17
First null fill (dB)
>-13
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>23
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1940x256x50 (6’4”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
14.1 (31)
Weight, without brackets, kg (lbs)
10.4 (22.9)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
794
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2050x308x121 (6’9”x1’x5”)
Shipping weight, kg (lbs)
13 (29)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08057 Rev A
Updated: 2010-04-05
364
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7272.02
POLARIZATION: V-Pol
Urban Vertical Polarized
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17/14.9
TILT: FET
LENGTH: 2m (6’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
Frequency band (MHz)
Gain (dBi/dBd)
17/14.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
9.5
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1940x256x50 (6’4”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
14.7 (32.4)
Weight, without brackets, kg (lbs)
11 (24.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
794
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2050x308x121 (4’8”x1’x5“)
Shipping weight, kg (lbs)
14.8 (32.6)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08051 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-05
365
POWERWAVE
7228.03
Single Band Antennas
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.0/15.9
TILT: 0°
LENGTH: 2.6m (8’6”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
870-960
Frequency range (MHz)
Frequency band (MHz)
870-960
Gain (dBi/dBd)
18.0/15.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>19
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>23
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x N-female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x256x50 (8’6”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
16.5 (36.3)
Weight, without brackets, kg (lbs)
10.3 (22.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1082/139/1091
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2690x308x121 (8’10”x1’x5”)
Shipping weight, kg (lbs)
17.0 (37.9)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-08-09
366
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
7228.04
Single Band Antennas
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.0/15.9
TILT: 0°
LENGTH: 2.6m (8’6”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
870-960
Frequency range (MHz)
Frequency band (MHz)
870-960
Gain (dBi/dBd)
18.0/15.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>19
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>23
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x256x50 (8’6”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
16.5 (36.3)
Weight, without brackets, kg (lbs)
10.3 (22.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1082/139/1091
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2690x308x121 (8’10”x1’x5”)
Shipping weight, kg (lbs)
17.0 (37.9)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-08-09
367
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7228.06
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18/15.9
TILT: FET
LENGTH: 2.6m (8’6”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
18/15.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
6
Side lobe suppression, vertical 1st upper (dB)
>17
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>25
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x256x50 (8’6”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
16.5 (36.3)
Weight, without brackets, kg (lbs)
10.3 (22.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1082/139/1091
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2690x308x121 (8’10”x1’x5”)
Shipping weight, kg (lbs)
17 (379)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08059 Rev A
Updated: 2010-04-05
368
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7228.08
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18/15.9
TILT: FET
LENGTH: 2.6m (8’6”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
18/15.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
2
Side lobe suppression, vertical 1st upper (dB)
>17
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>25
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x256x50 (8’6”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
16.5 (36.3)
Weight, without brackets, kg (lbs)
10.3 (22.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1082/139/1091
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2690x308x121 (8’10”x1’x5”)
Shipping weight, kg (lbs)
17 (379)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08060 Rev A
Updated: 2010-04-05
369
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7273.02
POLARIZATION: V-Pol
Urban Vertical Polarized
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18/15.9
TILT: FET
LENGTH: 2.6m (8’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
Frequency band (MHz)
Gain (dBi/dBd)
18/15.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
7
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x256x50 (8’6”x10”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
17.7 (39)
Weight, without brackets, kg (lbs)
14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1082
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2650x308x121 (8’8”x1’x5”)
Shipping weight, kg (lbs)
18.8 (41.4)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08052 Rev A
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-05
370
POWERWAVE
Single Band Antennas
7230.04
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 12/9.9
TILT: FET
LENGTH: 0.7m (2’3”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
12/9.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
90
Vertical beam width, -3 dB (°)
27
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>12
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>20
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
300
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
695x160x55 (2’3”x6”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
7 (15.4)
Weight, without brackets, kg (lbs)
3.3 (7.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
154
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
805x216x156 (2’8”x9’x6”)
Shipping weight, kg (lbs)
7.5 (16.5)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08061 Rev A
Updated: 2010-04-05
371
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7231.04
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 14/11.9
TILT: FET
LENGTH: 1.3m (4’3”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
14/11.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
90
Vertical beam width, -3 dB (°)
14
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>15
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>20
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x160x55 (4’4”x6”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
9.7 (21.3)
Weight, without brackets, kg (lbs)
6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
1430x216x156 (4’8”x9’x6”)
Shipping weight, kg (lbs)
11 (24.2)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08062 Rev A
Updated: 2010-04-05
372
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7231.06
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 14/11.9
TILT: FET
LENGTH: 1.3m (4’3”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
14/11.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
90
Vertical beam width, -3 dB (°)
14
Electrical down tilt (°)
6
Side lobe suppression, vertical 1st upper (dB)
>17
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>20
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x160x55 (4’4”x6”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
9.7 (21.3)
Weight, without brackets, kg (lbs)
6 (13.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
1430x216x156 (4’8”x9’x6”)
Shipping weight, kg (lbs)
11 (24.2)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08063 Rev A
Updated: 2010-04-05
373
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7232.04
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 15/12.9
TILT: FET
LENGTH: 1.9m (6’2”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
15/12.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
90
Vertical beam width, -3 dB (°)
9
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>15
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>20
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1940x160x55 (6’4”x6”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
13.7 (30.2)
Weight, without brackets, kg (lbs)
10 (22)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
502
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2050x216x156 (6’9”x9’x6”)
Shipping weight, kg (lbs)
15 (33)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08064 Rev A
Updated: 2010-04-05
374
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7232.07
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 15/12.9
TILT: FET
LENGTH: 1.9m (6’2”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
Frequency band (MHz)
870-960
Gain (dBi/dBd)
15/12.9
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
90
Vertical beam width, -3 dB (°)
9
Electrical down tilt (°)
4
Side lobe suppression, vertical 1st upper (dB)
>15
First null fill (dB)
>-15
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>20
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1940x160x55 (6’4”x6”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
13.7 (30.2)
Weight, without brackets, kg (lbs)
10 (22)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
502
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2050x216x156 (6’9”x9’x6”)
Shipping weight, kg (lbs)
15 (33)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08065 Rev A
Updated: 2010-04-05
375
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7233.04
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 16.5/14.4
TILT: FET
LENGTH: 2.6m (8’6”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
870-960
Frequency range (MHz)
Frequency band (MHz)
870-960
Gain (dBi/dBd)
16.5/14.4
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
90
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
0
Side lobe suppression, vertical 1st upper (dB)
>17
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>20
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x160x55 (8’6”x6”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
13.8 (30.4)
Weight, without brackets, kg (lbs)
8.3 (18.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
680
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2690x216x156 (8’10”x9’x6”)
Shipping weight, kg (lbs)
15 (33)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08066 Rev A
Updated: 2010-04-05
376
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7233.06
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 16.5/14.4
TILT: FET
LENGTH: 2.6m (8’6”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
870-960
Frequency range (MHz)
Frequency band (MHz)
870-960
Gain (dBi/dBd)
16.5/14.4
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
90
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
6
Side lobe suppression, vertical 1st upper (dB)
>17
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>20
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x160x55 (8’6”x6”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
13.8 (30.4)
Weight, without brackets, kg (lbs)
8.3 (18.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
680
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2690x216x156 (8’10”x9’x6”)
Shipping weight, kg (lbs)
15 (33)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08067 Rev A
Updated: 2010-04-05
377
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Single Band Antennas
7233.08
POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 16.5/14.4
TILT: FET
LENGTH: 2.6m (8’6”)
Urban Vertical Polarized
ELECTRICAL SPECIFICATIONS*
870-960
Frequency range (MHz)
Frequency band (MHz)
870-960
Gain (dBi/dBd)
16.5/14.4
Polarization
Linear vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.3:1
Horizontal beam width, -3 dB (°)
90
Vertical beam width, -3 dB (°)
6.5
Electrical down tilt (°)
2
Side lobe suppression, vertical 1st upper (dB)
>17
First null fill (dB)
>-20
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>20
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2580x160x55 (8’6”x6”x2”)
Mounting
Pre-mounted standard bracket
Weight, with brackets, kg (lbs)
13.8 (30.4)
Weight, without brackets, kg (lbs)
8.3 (18.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
680
Maximum operational wind speed, m/s (mph)
42
Survival wind speed, m/s (mph)
55
Lightning protection
DC grounded
Operating Temperature
Radome material
PVC
Radome colour
Light Gray
Package size, HxWxD, mm (ft)
2690x216x156 (8’10”x9’x6”)
Shipping weight, kg (lbs)
15 (33)
Brackets
7456.00A, 2201.11, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-8068 Rev A
Updated: 2010-04-05
378
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Dual Band Antennas
POWERWAVE
ALXC Cross Polarized Antennas, 870-960/1710-1880 MHz
Dual Band Antennas
Cross Polarized
ALXC Cross Polarized Antennas, 870-960/1710-1880 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
65
15.5/13.4, 15.0/12.9
FET
1.5m (4'11")
7329.00B
380
65
15.5/13.4, 15.0/12.9
FET
1.5m (4'11")
7329.06B
381
65
15.5/13.4, 17.5/15.4
FET
1.5m (4'11")
7330.00B
382
65
15.5/13.4, 17.5/15.4
FET
1.5m (4'11")
7330.02B
383
65
15.5/13.4, 17.5/15.4
FET
1.5m (4'11")
7330.04B
384
65
15.5/13.4, 17.5/15.4
FET
1.5m (4'11")
7330.06B
385
65
16.5/14.4, 16.0/13.9
FET
2.0m (6'6")
7331.00B
386
65
16.5/14.4, 16.0/13.9
FET
2.0m (6'6")
7331.02B
387
65
16.5/14.4, 16.0/13.9
FET
2.0m (6'6")
7331.04B
388
65
16.5/14.4, 16.0/13.9
FET
2.0m (6'6")
7331.06B
389
379
POWERWAVE
Dual Band Antennas
7329.00B
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960, 1710-1880
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.5/13.4, 15.0/12.9
TILT: FET
LENGTH: 1.5m (4’11”)
ALXC Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
1710-1880
Frequency band (MHz)
870-960
1710-1880
Gain (dBi/dBd)
15.5/13.4
Polarization
15/12.9
Dual linear slanted
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
65
65
Vertical beam width, -3 dB (°)
13
13
Electrical down tilt (°)
0
0
Side lobe suppression, vertical 1st upper (dB)
>13
>15
Isolation between inputs (dB)
>30
>30
Inter band Isolation (dB)
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
>-20
>-20
Vertical beam squint (°)
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>26
>26
Front to back ratio (dB) 180°±30° total power
>26
>26
Cross polar discrimination (XPD) 0° (dB)
>13
>13
Cross polar discrimination (XPD) ±60° (dB)
>12
>12
>-150
>-150
Power handling, average per input (W)
300
300
Power handling, average total (W)
600
600
IM3, 2xTx@43dBm (dBc)
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1450x280x125 (4’9”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
12.6 (27.7)
Weight, without brackets, kg (lbs)
7.1 (15.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
430
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray
Package size, HxWxD, mm (ft)
1620x355x255 (5’4”x1’2”x10”)
Shipping weight, kg (lbs)
15.3 (13.7)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08143 Rev A
Updated: 2009-07-28
380
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
7329.06B
Dual Band Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960, 1710-1880
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.5/13.4, 15.0/12.9
TILT: FET
LENGTH: 1.5m (4’11”)
ALXC Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
1710-1880
Frequency band (MHz)
870-960
1710-1880
Gain (dBi/dBd)
15.5/13.4
Polarization
14.5/12.4
Dual linear slanted
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
65
65
Vertical beam width, -3 dB (°)
13
13
Electrical down tilt (°)
6
6
Side lobe suppression, vertical 1st upper (dB)
>8
>13
Isolation between inputs (dB)
>30
>30
Inter band Isolation (dB)
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
>-20
>-20
Vertical beam squint (°)
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>26
>26
Front to back ratio (dB) 180°±30° total power
>26
>26
Cross polar discrimination (XPD) 0° (dB)
>13
>13
Cross polar discrimination (XPD) ±60° (dB)
>11
>9
>-150
>-150
Power handling, average per input (W)
300
300
Power handling, average total (W)
600
600
IM3, 2xTx@43dBm (dBc)
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1450x280x125 (4’9”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
12.6 (27.7)
Weight, without brackets, kg (lbs)
7.1 (15.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
430
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray
Package size, HxWxD, mm (ft)
1620x355x255 (5’4”x1’2”x10”)
Shipping weight, kg (lbs)
15.3 (13.7)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-
Updated: 2009-07-28
381
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7330.00B
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960, 1710-1880
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4
TILT: FET
LENGTH: 1.5m (4’11”)
ALXC Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
1710-1880
Frequency band (MHz)
870-960
1710-1880
Gain (dBi/dBd)
15.5/13.4
Polarization
17.5/15.4
Dual linear slanted
1RPLQDO,PSHGDQFH ȍ
50
VSWR
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
<1.5:1
<1.5:1
67
66
13.4
7
0
0
Side lobe suppression, vertical 1st upper (dB)
>16
>16
Isolation between inputs (dB)
>30
>30
Inter band Isolation (dB)
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
>-20
>-20
Vertical beam squint (°)
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>26
>26
Front to back ratio (dB) 180°±30° total power
>26
>26
Cross polar discrimination (XPD) 0° (dB)
>13
>13
Cross polar discrimination (XPD) ±60° (dB)
>12
>13
>-150
>-150
Power handling, average per input (W)
300
300
Power handling, average total (W)
600
600
IM3, 2xTx@43dBm (dBc)
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1450x280x125 (4’9”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
12.6 (27.7)
Weight, without brackets, kg (lbs)
7.1 (15.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
430
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray
Package size, HxWxD, mm (ft)
1620x355x255 (5’4”x1’2”x10”)
Shipping weight, kg (lbs)
15.3 (13.7)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08144 Rev A
Updated: 2009-07-28
382
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7330.02B
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960, 1710-1880
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4
TILT: FET
LENGTH: 1.5m (4’11”)
ALXC Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
1710-1880
Frequency band (MHz)
870-960
1710-1880
Gain (dBi/dBd)
15.5/13.4
Polarization
17.5/15.4
Dual linear slanted
1RPLQDO,PSHGDQFH ȍ
50
VSWR
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
<1.5:1
<1.5:1
67
66
13.4
7
2
2
Side lobe suppression, vertical 1st upper (dB)
>16
>16
Isolation between inputs (dB)
>30
>30
Inter band Isolation (dB)
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
>-20
>-20
Vertical beam squint (°)
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>26
>26
Front to back ratio (dB) 180°±30° total power
>26
>26
Cross polar discrimination (XPD) 0° (dB)
>13
>13
Cross polar discrimination (XPD) ±60° (dB)
>12
>13
>-150
>-150
Power handling, average per input (W)
300
300
Power handling, average total (W)
600
600
IM3, 2xTx@43dBm (dBc)
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1450x280x125 (4’9”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
12.6 (27.7)
Weight, without brackets, kg (lbs)
7.1 (15.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
430
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray
Package size, HxWxD, mm (ft)
1620x355x255 (5’4”x1’2”x10”)
Shipping weight, kg (lbs)
15.3 (13.7)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08145 Rev A
Updated: 2009-07-28
383
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7330.04B
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960, 1710-1880
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4
TILT: FET
LENGTH: 1.5m (4’11”)
ALXC Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
1710-1880
Frequency band (MHz)
870-960
1710-1880
Gain (dBi/dBd)
15.5/13.4
Polarization
17.5/15.4
Dual linear slanted
1RPLQDO,PSHGDQFH ȍ
50
VSWR
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
<1.5:1
<1.5:1
67
66
13.4
7
4
4
Side lobe suppression, vertical 1st upper (dB)
>16
>16
Isolation between inputs (dB)
>30
>30
Inter band Isolation (dB)
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
>-20
>-20
Vertical beam squint (°)
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>26
>26
Front to back ratio (dB) 180°±30° total power
>26
>26
Cross polar discrimination (XPD) 0° (dB)
>13
>13
Cross polar discrimination (XPD) ±60° (dB)
>12
>13
>-150
>-150
Power handling, average per input (W)
300
300
Power handling, average total (W)
600
600
IM3, 2xTx@43dBm (dBc)
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1450x280x125 (4’9”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
12.6 (27.7)
Weight, without brackets, kg (lbs)
7.1 (15.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
430
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray
Package size, HxWxD, mm (ft)
1620x355x255 (5’4”x1’2”x10”)
Shipping weight, kg (lbs)
15.3 (13.7)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08146 Rev A
Updated: 2009-07-28
384
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7330.06B
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960, 1710-1880
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.5/13.4, 17.5/15.4
TILT: FET
LENGTH: 1.5m (4’11”)
ALXC Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
1710-1880
Frequency band (MHz)
870-960
1710-1880
Gain (dBi/dBd)
15.6/13.5
Polarization
17.3/15.2
Dual linear slanted
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
67
66
Vertical beam width, -3 dB (°)
13
7
Electrical down tilt (°)
6
6
Side lobe suppression, vertical 1st upper (dB)
>16
>16
Isolation between inputs (dB)
>30
>30
Inter band Isolation (dB)
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
>-20
>-20
Vertical beam squint (°)
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>26
>26
Front to back ratio (dB) 180°±30° total power
>26
>26
Cross polar discrimination (XPD) 0° (dB)
>13
>13
Cross polar discrimination (XPD) ±60° (dB)
>11
>11
>-150
>-150
Power handling, average per input (W)
300
300
Power handling, average total (W)
600
600
IM3, 2xTx@43dBm (dBc)
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1450x280x125 (4’9”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
12.6 (27.7)
Weight, without brackets, kg (lbs)
7.1 (15.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
430
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray
Package size, HxWxD, mm (ft)
1620x355x255 (5’4”x1’2”x10”)
Shipping weight, kg (lbs)
15.3 (13.7)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08147 Rev A
Updated: 2009-07-28
385
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7331.00B
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960, 1710-1880
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9
TILT: FET
LENGTH: 2.0m (6’6”)
ALXC Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
1710-1880
Frequency band (MHz)
870-960
1710-1880
Gain (dBi/dBd)
16.6/14.5
Polarization
16.1/14
Dual linear slanted
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
67
64
Vertical beam width, -3 dB (°)
9
9
Electrical down tilt (°)
0
0
Side lobe suppression, vertical 1st upper (dB)
>16
>16
Isolation between inputs (dB)
>30
>30
Inter band Isolation (dB)
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
>-22
>-22
Vertical beam squint (°)
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>25
>25
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
>13
>13
Cross polar discrimination (XPD) ±60° (dB)
>11
>11
>-150
>-150
Power handling, average per input (W)
300
300
Power handling, average total (W)
600
600
IM3, 2xTx@43dBm (dBc)
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1990x280x125 (6’6”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
15.3 (33.7)
Weight, without brackets, kg (lbs)
9.8 (21.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
636
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray
Package size, HxWxD, mm (ft)
2160x355x255 (7’1”x1’2”x10”)
Shipping weight, kg (lbs)
18.3 (40.3)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08148 Rev A
Updated: 2009-07-28
386
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7331.02B
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960, 1710-1880
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9
TILT: FET
LENGTH: 2.0m (6’6”)
ALXC Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
1710-1880
Frequency band (MHz)
870-960
1710-1880
Gain (dBi/dBd)
16.6/14.5
Polarization
15.6/13.5
Dual linear slanted
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
67
64
Vertical beam width, -3 dB (°)
9
9
Electrical down tilt (°)
2
2
Side lobe suppression, vertical 1st upper (dB)
>16
>16
Isolation between inputs (dB)
>30
>30
Inter band Isolation (dB)
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
>-22
>-22
Vertical beam squint (°)
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>25
>25
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
>13
>13
Cross polar discrimination (XPD) ±60° (dB)
>11
>11
>-150
>-150
Power handling, average per input (W)
300
300
Power handling, average total (W)
600
600
IM3, 2xTx@43dBm (dBc)
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1990x280x125 (6’6”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
15.3 (33.7)
Weight, without brackets, kg (lbs)
9.8 (21.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
636
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray
Package size, HxWxD, mm (ft)
2160x355x255 (7’1”x1’2”x10”)
Shipping weight, kg (lbs)
18.3 (40.3)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08149 Rev A
Updated: 2009-07-28
387
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7331.04B
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960, 1710-1880
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9
TILT: FET
LENGTH: 2.0m (6’6”)
ALXC Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
1710-1880
Frequency band (MHz)
870-960
1710-1880
Gain (dBi/dBd)
16.6/14.5
Polarization
15.4/13.3
Dual linear slanted
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
67
64
Vertical beam width, -3 dB (°)
9
9
Electrical down tilt (°)
4
4
Side lobe suppression, vertical 1st upper (dB)
>16
>16
Isolation between inputs (dB)
>30
>30
Inter band Isolation (dB)
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
>-22
>-22
Vertical beam squint (°)
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>25
>25
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
>13
>13
Cross polar discrimination (XPD) ±60° (dB)
>11
>11
>-150
>-150
Power handling, average per input (W)
300
300
Power handling, average total (W)
600
600
IM3, 2xTx@43dBm (dBc)
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1990x280x125 (6’6”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
15.3 (33.7)
Weight, without brackets, kg (lbs)
9.8 (21.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
636
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray
Package size, HxWxD, mm (ft)
2160x355x255 (7’1”x1’2”x10”)
Shipping weight, kg (lbs)
18.3 (40.3)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08150 Rev A
Updated: 2009-07-28
388
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7331.06B
POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960, 1710-1880
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.5/14.4, 16.0/13.9
TILT: FET
LENGTH: 2.0m (6’6”)
ALXC Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
870-960
1710-1880
Frequency band (MHz)
870-960
1710-1880
Gain (dBi/dBd)
16.6/14.5
Polarization
16.1/14
Dual linear slanted
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
67
64
Vertical beam width, -3 dB (°)
9
9
Electrical down tilt (°)
6
6
Side lobe suppression, vertical 1st upper (dB)
>16
>16
Isolation between inputs (dB)
>30
>30
Inter band Isolation (dB)
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
First null fill (dB)
>-22
>-22
Vertical beam squint (°)
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>25
>25
Front to back ratio (dB) 180°±30° total power
>25
>25
Cross polar discrimination (XPD) 0° (dB)
>13
>13
Cross polar discrimination (XPD) ±60° (dB)
>11
>11
>-150
>-150
Power handling, average per input (W)
300
300
Power handling, average total (W)
600
600
IM3, 2xTx@43dBm (dBc)
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1990x280x125 (6’6”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
15.3 (33.7)
Weight, without brackets, kg (lbs)
9.8 (21.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
636
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray
Package size, HxWxD, mm (ft)
2160x355x255 (7’1”x1’2”x10”)
Shipping weight, kg (lbs)
18.3 (40.3)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08151 Rev A
Updated: 2009-07-28
389
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Dual Band Antennas
POWERWAVE
DBB90 Cross Polarized Antennas, 824-896/1710-2170 MHz
Dual Band Antennas
Cross Polarized
DBB90 Cross Polarized Antennas, 824-896/1710-2170 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
90
13.5/11.4, 15.5/13.4
MET
1.4m (4’7”)
7770.00A
391
90
15/12.9, 16/13.9
MET
2.0m (6’6”)
7772.00A
392
90
16/13.9, 16/13.9
MET
2.0m (6’6”)
7775.00A
393
390
POWERWAVE
7770.00A
Dual Band Antennas
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-896, 1710-2170
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 13.5/11.4, 15.5/13.4
TILT: MET
LENGTH: 1.4m (4’7”)
DBB90 Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-896
Frequency band (MHz)
824-896
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
13.5/11.4
15.5/13.4
15.5/13.4
15.5/13.4
Polarization
1710-2170
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
85
90
90
90
Vertical beam width, -3 dB (°)
15
7
7
7
Electrical down tilt (°)
0 to 10
0 to 8
Side lobe suppression, vertical 1st upper (dB)
>18
>18
>18
>18
Isolation between inputs (dB)
>30
>30
>30
>25
Inter band Isolation (dB)
>36
Tracking, horizontal plane ±60° (dB)
<2
<2
<2
-
-
-
-
Vertical beam squint (°)
<1.0
<0.5
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>25
>25
>25
>25
Front to back ratio (dB) 180°±30° total power
>22
>21
>21
>21
-
-
-
-
>10
>10
>10
>10
-
-
-
-
First null fill (dB)
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
IM3, 2xTx@43dBm (dBc)
>36
<-153
<-153
IM7, 2xTx@43dBm (dBc)
-
<-160
Power handling, average per input (W)
500
250
Power handling, average total (W)
800
500
<2
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1408x280x125mm
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
17.6 (39)
Weight, without brackets, kg (lbs)
12.1 (27)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Package size, HxWxD, mm (ft)
1550x355x255 (61”x1’2”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
21.5 (47.4)
RET
8220.10, 8220.40, 8210.10, 8210.40
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visithttp://www.powerwave.com/rpa/.
Updated: 2009-07-28
391
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
7772.00A
Dual Band Antennas
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-896, 1710-2170
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 15/12.9, 16/13.9
TILT: MET
LENGTH: 2.0m (6’6”)
DBB90 Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-896
Frequency band (MHz)
824-896
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
15/12.9
16/13.9
16/13.9
16/13.9
Polarization
1710-2170
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
85
90
90
90
Vertical beam width, -3 dB (°)
9.5
6.5
6.5
6.5
Electrical down tilt (°)
0 to 7
0 to 8
Side lobe suppression, vertical 1st upper (dB)
>17
>15
>15
>15
Isolation between inputs (dB)
>30
>30
>30
>25
Inter band Isolation (dB)
>38
Tracking, horizontal plane ±60° (dB)
<1
<2
<2
-
-
-
-
Vertical beam squint (°)
<1.0
<0.5
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>25
>25
>25
>25
Front to back ratio (dB) 180°±30° total power
>22
>21
>21
>21
-
-
-
-
>10
>9
>9
>9
-
-
-
-
First null fill (dB)
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
IM3, 2xTx@43dBm (dBc)
>38
<-153
IM7, 2xTx@43dBm (dBc)
<2
<-153
-
-
Power handling, average per input (W)
400
250
Power handling, average total (W)
800
500
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2033x280x125mm
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
19.8 (44)
Weight, without brackets, kg (lbs)
16.0 (35)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Package size, HxWxD, mm (ft)
2175x355x255 (7’2”x14”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
27 (59.5)
RET
8220.10, 8220.40, 8210.10, 8210.40
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visithttp://www.powerwave.com/rpa/.
Updated: 2009-07-28
392
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
7775.00A
Dual Band Antennas
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-896, 1710-2170
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 16/13.9, 16/13.9
TILT: MET
LENGTH: 2.6m (8’6”)
DBB90 Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-896
Frequency band (MHz)
824-896
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
16/13.9
16/13.9
16/13.9
16/13.9
Polarization
1710-2170
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
85
90
90
90
Vertical beam width, -3 dB (°)
7
6.5
6.5
6.5
Electrical down tilt (°)
0 to 6
0 to 8
Side lobe suppression, vertical 1st upper (dB)
>16
>16
>16
>16
Isolation between inputs (dB)
>30
>30
>30
>25
Inter band Isolation (dB)
>36
Tracking, horizontal plane ±60° (dB)
<1
<2
<2
-
-
-
-
Vertical beam squint (°)
<0.5
<0.5
<0.5
<0.5
Front to back ratio (dB) 180°±30° copolar
>25
>25
>25
>25
Front to back ratio (dB) 180°±30° total power
>23
>21
>21
>21
-
-
-
-
>12
>9
>9
>9
-
-
-
-
First null fill (dB)
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
IM3, 2xTx@43dBm (dBc)
>36
<-153
IM7, 2xTx@43dBm (dBc)
<2
<-153
-
-
Power handling, average per input (W)
400
250
Power handling, average total (W)
800
500
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2658x280x125mm
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
25.1 (55)
Weight, without brackets, kg (lbs)
19.6 (43)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Package size, HxWxD, mm (ft)
2800x355x255 (9’2”x1’2”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
32.5 (71.6)
RET
8220.10, 8220.40, 8210.10, 8210.40
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visithttp://www.powerwave.com/rpa/.
Updated: 2009-07-28
393
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Dual Band Antennas
POWERWAVE
ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz
Dual Band Antennas
Vertical Polarized
ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
65
14.5/12.4, 17.5/15.4
MET
1.3m (4'3")
7840.00
395
70
14.5/12.4, 17.5/15.4
FET
1.4m (4'7")
7333.02B
396
70
14.5/12.4, 17.5/15.4
FET
1.4m (4'7")
7333.00B
397
70
14.5/12.4, 17.5/15.4
FET
1.4m (4'7")
7333.06B
398
80
14.0/11.9, 17.0/14.9
FET
1.4m (4'7")
7332.02B
399
80
14.0/11.9, 17.0/14.9
FET
1.4m (4'7")
7332.06B
400
90
13.5/12.4, 16.5/14.4
FET
1.4m (4'7")
7334.02B
401
90
13.5/12.4, 16.5/14.4
FET
1.4m (4'7")
7332.00B
402
90
13.5/12.4, 16.5/14.4
FET
1.4m (4'7")
7334.00B
403
90
13.5/12.4, 16.5/14.4
FET
1.4m (4'7")
7334.06B
404
90
14.0/11.9, 17.0/14.9
FET
1.3m (4'3")
7850.00B
405
394
POWERWAVE
7840.00
Dual Band Antennas
POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4
TILT: MET
LENGTH: 1.3m (4’3”)
ALVC Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-896
1850-1990
Frequency band (MHz)
824-896
1850-1990
Gain (dBi/dBd)
14/11.9
17.5/15.4
Vertical linear
Vertical linear
Polarization
1RPLQDO,PSHGDQFH ȍ
50
50
<1.4:1
<1.4:1
Horizontal beam width, -3 dB (°)
73
68
Vertical beam width, -3 dB (°)
15
7
Electrical down tilt (°)
0-12
0-8
Side lobe suppression, vertical 1st upper (dB)
>15
>15
VSWR
First null fill (dB)
Vertical beam squint (°)
Front to back ratio (dB) 180°±30° copolar
IM3, 2xTx@43dBm (dBc)
Power handling, average per input (W)
-
-18
<0.5
<0.5
>25
>25
<-150
<-150
400
200
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1331x280x125 (4’4”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
17.5 (38.5)
Weight, without brackets, kg (lbs)
12 (26.4)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
388
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (198)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray RAL 7035 on all visible plastic parts
Package size, HxWxD, mm (ft)
1495x355x255 (4’11”x1’2”x10”)
Shipping weight, kg (lbs)
15.8 (34.8)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-
Updated: 2010-03-31
395
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7333.02B
POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (°): 70
GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4
TILT: FET
LENGTH: 1.4m (4’7”)
ALVC Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-896
1850-1990
Frequency band (MHz)
806-896
1850-1990
Gain (dBi/dBd)
14.8/12.7
17.6/15.5
Vertical linear
Vertical linear
Polarization
1RPLQDO,PSHGDQFH ȍ
50
50
<1.4:1
<1.4:1
Horizontal beam width, -3 dB (°)
72
71
Vertical beam width, -3 dB (°)
15
7
Electrical down tilt (°)
2
2
>16/16
>16/16
VSWR
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
Vertical beam squint (°)
Front to back ratio (dB) 180°±30° copolar
IM3, 2xTx@43dBm (dBc)
Power handling, average per input (W)
-
-17
<0.5
<0.5
>28
>28
<-150
<-150
350
175
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1350x280x125 (4’5”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
14.9 (32.8)
Weight, without brackets, kg (lbs)
9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (198)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray RAL 7035 on all visible plastic parts
Package size, HxWxD, mm (ft)
1520x355x200 (5’x1’2”x10”)
Shipping weight, kg (lbs)
13.9 (30.6)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08154 Rev. A
Updated: 2010-03-31
396
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7333.00B
POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (°): 70
GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4
TILT: FET
LENGTH: 1.4m (4’7”)
ALVC Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-896
1850-1990
Frequency band (MHz)
806-896
1850-1990
Gain (dBi/dBd)
14.8/12.7
17.6/15.5
Vertical linear
Vertical linear
Polarization
1RPLQDO,PSHGDQFH ȍ
50
50
<1.4:1
<1.4:1
Horizontal beam width, -3 dB (°)
72
70
Vertical beam width, -3 dB (°)
15
7
Electrical down tilt (°)
0
0
>16
>16
VSWR
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
Vertical beam squint (°)
Front to back ratio (dB) 180°±30° copolar
IM3, 2xTx@43dBm (dBc)
Power handling, average per input (W)
-
-17
<0.5
<0.5
>28
>28
<-150
<-150
350
175
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1350x280x125 (4’5”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
14.9 (32.8)
Weight, without brackets, kg (lbs)
9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (198)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray RAL 7035 on all visible plastic parts
Package size, HxWxD, mm (ft)
1520x355x200 (5’x1’2”x10”)
Shipping weight, kg (lbs)
13.9 (30.6)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08154 Rev A
Updated: 2010-03-31
397
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7333.06B
POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (°): 70
GAIN (dBi/dBd): 14.5/12.4, 17.5/15.4
TILT: FET
LENGTH: 1.4m (4’7”)
ALVC Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-896
1850-1990
Frequency band (MHz)
806-896
1850-1990
Gain (dBi/dBd)
14.8/12.7
17.6/15.5
Vertical linear
Vertical linear
Polarization
1RPLQDO,PSHGDQFH ȍ
50
50
<1.4:1
<1.4:1
Horizontal beam width, -3 dB (°)
72
71
Vertical beam width, -3 dB (°)
15
7
Electrical down tilt (°)
6
6
>16/16
>16/16
VSWR
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
Vertical beam squint (°)
Front to back ratio (dB) 180°±30° copolar
IM3, 2xTx@43dBm (dBc)
Power handling, average per input (W)
-
-17
<0.5
<0.5
>28
>28
<-150
<-150
350
175
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1350x280x125 (4’5”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
14.9 (32.8)
Weight, without brackets, kg (lbs)
9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (198)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray RAL 7035 on all visible plastic parts
Package size, HxWxD, mm (ft)
1520x355x200 (5’x1’2”x10”)
Shipping weight, kg (lbs)
13.9 (30.6)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08155 Rev A
Updated: 2010-03-31
398
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7332.02B
POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (°): 80
GAIN (dBi/dBd): 14.0/11.9, 17.0/14.9
TILT: FET
LENGTH: 1.4m (4’7”)
ALVC Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-896
1850-1990
Frequency band (MHz)
806-896
1850-1990
Gain (dBi/dBd)
14/11.9
17.2/15.1
Vertical linear
Vertical linear
Polarization
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
Vertical beam squint (°)
Front to back ratio (dB) 180°±30° copolar
IM3, 2xTx@43dBm (dBc)
Power handling, average per input (W)
50
50
<1.4:1
<1.4:1
81
79
15.5
7
2
2
>16
>16
-
-17
<0.5
<0.5
>27
>27
<-150
<-150
350
350
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1350x280x125 (4’5”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
14.9 (32.8)
Weight, without brackets, kg (lbs)
9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (198)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray RAL 7035 on all visible plastic parts
Package size, HxWxD, mm (ft)
1520x355x200 (5’x1’2”x10”)
Shipping weight, kg (lbs)
13.9 (30.6)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08152 Rev. A
Updated: 2010-03-31
399
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7332.06B
POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (°): 80
GAIN (dBi/dBd): 14.0/11.9, 17.0/14.9
TILT: FET
LENGTH: 1.4m (4’7”)
ALVC Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-896
1850-1990
Frequency band (MHz)
806-896
1850-1990
Gain (dBi/dBd)
14/11.9
17.2/15.1
Vertical linear
Vertical linear
Polarization
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
Vertical beam squint (°)
Front to back ratio (dB) 180°±30° copolar
IM3, 2xTx@43dBm (dBc)
Power handling, average per input (W)
50
50
<1.4:1
<1.4:1
81
79
15.5
7
6
6
>16
>16
-
-17
<0.5
<0.5
>27
>27
<-150
<-150
350
350
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1350x280x125 (4’5”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
14.9 (32.8)
Weight, without brackets, kg (lbs)
9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (198)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray RAL 7035 on all visible plastic parts
Package size, HxWxD, mm (ft)
1520x355x200 (5’x1’2”x10”)
Shipping weight, kg (lbs)
13.9 (30.6)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08153 Rev A
Updated: 2010-03-31
400
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7334.02B
POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4
TILT: FET
LENGTH: 1.4m (4’7”)
ALVC Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-896
1850-1990
Frequency band (MHz)
806-896
1850-1990
Gain (dBi/dBd)
13.5/11.4
16.5/14.4
Vertical linear
Vertical linear
Polarization
1RPLQDO,PSHGDQFH ȍ
50
50
<1.4:1
<1.4:1
Horizontal beam width, -3 dB (°)
89
91
Vertical beam width, -3 dB (°)
15
7
Electrical down tilt (°)
2
2
>16/16
>16/16
VSWR
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
Vertical beam squint (°)
Front to back ratio (dB) 180°±30° copolar
IM3, 2xTx@43dBm (dBc)
Power handling, average per input (W)
-
-17
<0.5
<0.5
>26
>26
<-150
<-150
350
175
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1350x280x125 (4’5”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
14.9 (32.8)
Weight, without brackets, kg (lbs)
9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (198)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray RAL 7035 on all visible plastic parts
Package size, HxWxD, mm (ft)
1520x355x200 (5’x1’2”x10”)
Shipping weight, kg (lbs)
13.9 (30.6)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08156 Rev. A
Updated: 2010-03-31
401
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7332.00B
POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4
TILT: FET
LENGTH: 1.4m (4’7”)
ALVC Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-896
Frequency band (MHz)
806-896
1850-1990
Gain (dBi/dBd)
13.5/12.4
17.6/15.516.5/14.4
Vertical linear
Vertical linear
Polarization
1RPLQDO,PSHGDQFH ȍ
1850-1990
50
50
<1.4:1
<1.4:1
Horizontal beam width, -3 dB (°)
89
91
Vertical beam width, -3 dB (°)
15
7
Electrical down tilt (°)
2
2
>16
>16
VSWR
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
Vertical beam squint (°)
Front to back ratio (dB) 180°±30° copolar
IM3, 2xTx@43dBm (dBc)
Power handling, average per input (W)
-
-17
<0.5
<0.5
>26
>26
<-150
<-150
350
175
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1350x280x125 (4’5”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
14.9 (32.8)
Weight, without brackets, kg (lbs)
9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (198)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray RAL 7035 on all visible plastic parts
Package size, HxWxD, mm (ft)
1520x355x200 (5’x1’2”x10”)
Shipping weight, kg (lbs)
13.9 (30.6)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08152 Rev A
Updated: 2010-03-31
402
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7334.00B
POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4
TILT: FET
LENGTH: 1.4m (4’7”)
ALVC Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-896
1850-1990
Frequency band (MHz)
806-896
1850-1990
Gain (dBi/dBd)
14/11.9
16.5/14.4
Vertical linear
Vertical linear
Polarization
1RPLQDO,PSHGDQFH ȍ
50
50
<1.4:1
<1.4:1
Horizontal beam width, -3 dB (°)
89
91
Vertical beam width, -3 dB (°)
15
7
Electrical down tilt (°)
0
0
>16
>16
VSWR
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
Vertical beam squint (°)
Front to back ratio (dB) 180°±30° copolar
IM3, 2xTx@43dBm (dBc)
Power handling, average per input (W)
-
-17
<0.5
<0.5
>26
>26
<-150
<-150
350
175
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1350x280x125 (4’5”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
14.9 (32.8)
Weight, without brackets, kg (lbs)
9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (198)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray RAL 7035 on all visible plastic parts
Package size, HxWxD, mm (ft)
1520x355x200 (5’x1’2”x10”)
Shipping weight, kg (lbs)
13.9 (30.6)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08156 Rev A
Updated: 2010-03-31
403
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7334.06B
POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 13.5/12.4, 16.5/14.4
TILT: FET
LENGTH: 1.4m (4’7”)
ALVC Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-896
1850-1990
Frequency band (MHz)
806-896
1850-1990
Gain (dBi/dBd)
13.5/11.4
16.5/14.4
Vertical linear
Vertical linear
Polarization
1RPLQDO,PSHGDQFH ȍ
50
50
<1.4:1
<1.4:1
Horizontal beam width, -3 dB (°)
89
91
Vertical beam width, -3 dB (°)
15
7
Electrical down tilt (°)
6
6
>16/16
>16/16
VSWR
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
Vertical beam squint (°)
Front to back ratio (dB) 180°±30° copolar
IM3, 2xTx@43dBm (dBc)
Power handling, average per input (W)
-
-17
<0.5
<0.5
>26
>26
<-150
<-150
350
175
MECHANICAL SPECIFICATIONS*
Connector
1 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1350x280x125 (4’5”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
14.9 (32.8)
Weight, without brackets, kg (lbs)
9.4 (20.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
394
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (198)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray RAL 7035 on all visible plastic parts
Package size, HxWxD, mm (ft)
1520x355x200 (5’x1’2”x10”)
Shipping weight, kg (lbs)
13.9 (30.6)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08157 Rev A
Updated: 2010-03-31
404
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Dual Band Antennas
7850.00B
POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 14.0/11.9, 17.0/14.9
TILT: 0-12°/0-8°
LENGTH: 1.3m (4’3”)
ALVC Vertical Polarized
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
806-896
1850-1990
Frequency band (MHz)
806-896
1850-1990
Gain (dBi/dBd)
13.8/11.7
16/13.9
Vertical linear
Vertical linear
Polarization
1RPLQDO,PSHGDQFH ȍ
VSWR
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
90
90
Vertical beam width, -3 dB (°)
15
6.5
Electrical down tilt (°)
0-12
0-8
Side lobe suppression, vertical 1st upper (dB)
>18
>18
First null fill (dB)
Vertical beam squint (°)
Front to back ratio (dB) 180°±30° copolar
IM3, 2xTx@43dBm (dBc)
Power handling, average per input (W)
-
-18
<0.5
<0.5
>26
>26
<-150
<-150
400
200
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1331x280x125 (4’4”x11”x5”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
17.5 (38.5)
Weight, without brackets, kg (lbs)
12 (26.4)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
388
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (198)
Lightning protection
DC grounded
Operating Temperature
Radome material
GRP
Radome colour
Light gray RAL 7035 on all visible plastic parts
Package size, HxWxD, mm (ft)
1495x355x255 (4’11”x1’2”x10”)
Shipping weight, kg (lbs)
15.8 (34.8)
RET
-
Brackets
7256.00, 7454.00, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08181 Rev A
Updated: 2010-04-09
405
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Power wave
iRET Antennas
The iRET antenna family is the next iteration of
Powerwave’s innovative antenna product line, which
integrates remote electrical tilt functionality under the
antenna radome, delivering maximized functionality
and improved aesthetics, while eliminating installation
and reliability issues that can occur with typical exterior
RET modules.
iRET Antennas
POWERWAVE
iRET Antennas
Page
Low Broadband Cross Polarized iRET Antennas, 698-894MHz
408
Dual Broadband Cross Polarized iRET Antennas, 698-894/1710-2170MHz
415
Triple High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
422
High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
448
High Broadband Cross Polarized iRET Antennas, 2300-2700MHz
452
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
455
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700MHz
458
Dual High Broadband Cross Polarized iRET Antennas, 2300-2700MHz
460
407
iRET Antennas
POWERWAVE
Low Broadband Cross Polarized iRET Antennas, 698-894 MHz
iRET Antennas
Cross Polarized
Low Broadband Cross Polarized iRET Antennas, 698-894 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
65
14.7/12.6
0-13°
1.3m(51”)
P65-15-XL-R
409
65
15.5/13.4
2-10°
1.8m(72”)
P65-16-XL-R
410
65
17.0/14.9
0-6°
2.4m(96”)
P65-17-XL-R
411
85
13.7/11.6
2-15°
1.2m(48)
P90-14-XL-R
412
90
14.7/12.6
2-11°
1.8m(72”)
P90-15-XL-R
413
90
16.1/14.0
0-6°
2.4m(96”)
P90-16-XL-R
414
408
POWERWAVE
P65-15-XL-R
Low Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.7/12.6
TILT: 0-13
LENGTH: 51” (1295mm)
Very Low Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
Frequency band (MHz)
698-806
806-894
Gain (dBi/dBd)
14.0/11.9
14.7/12.6
Dual Linear +/- 45
Dual Linear +/- 45
Polarization
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
50
50
< 1.5:1
< 1.5:1
70
63
Vertical beam width, -3 dB (°)
17.5
15.5
Side lobe suppression, vertical 1st upper (dB)
> 16
> 16
Isolation between inputs (dB)
> 30
> 30
Tracking, horizontal plane ±60° (dB)
<2
<2
Electrical Downtilt Range
0 - 13
0 - 13
Vertical beam squint (°)
< 0.5
< 0.5
Front to back ratio (dB) 180°±30° copolar
> 25
> 25
Front to back ratio (dB) 180°±30° total power
> 22
> 22
Cross polar discrimination (XPD) 0° (dB)
> 15
> 15
Cross polar discrimination (XPD) ±60° (dB)
> 10
>8
<-153
<-153
IM3, 2xTx@43dBm (dBc)
Power handling, average per input (W)
500
500
Power handling, average total (W)
1000
1000
MECHANICAL SPECIFICATIONS*
Connector
2 X 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, in (mm)
51” x 12” x 6” (1295 x 305 x 152)
Mounting
Pre-mounted tilt brackets
Weight, with brackets, lbs (kg)
36 (16)
Weight, without brackets, lbs (kg)
25 (11)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
920
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
150 (67)
Lightning protection
DC Ground
Operating Temperature
-40°C to +60°C
Radome material
PVC
Packet size, HxWxD, in (mm)
58” x 16” x 10” (1475 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
44 (20)
RET
iRET AISGv1.1, MET and AISGv2.0 Available
Brackets
7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-03
409
POWERWAVE
P65-16-XL-R
Low Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.5/13.4
TILT: 2 - 10
LENGTH: 72”
Very Low Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
Frequency band (MHz)
698-806
806-894
Gain (dBi/dBd)
14.8/12.7
15.5/13.4
Polarization
Dual Linear +/- 45
1RPLQDO,PSHGDQFH ȍ
50
VSWR
< 1.4:1
Horizontal beam width, -3 dB (°)
71
Vertical beam width, -3 dB (°)
14
Electrical down tilt (°)
65
12
2 - 10
Side lobe suppression, vertical 1st upper (dB)
> 15
Tracking, horizontal plane ±60° (dB)
<2
> 15
<2
Isolation between inputs (dB)
> 30
> 30
Vertical beam squint (°)
< 0.8
< 0.8
Front to back ratio (dB) 180°±30° copolar
> 30
> 30
Front to back ratio (dB) 180°±30° total power
> 21
> 25
Cross polar discrimination (XPD) 0° (dB)
> 15
> 15
Cross polar discrimination (XPD) ±60° (dB)
> 10
First null fill (dB)
IM3, 2xTx@43dBm (dBc)
> 10
<-153
Power handling, average per input (W)
500
Power handling, average total (W)
1000
MECHANICAL SPECIFICATIONS*
Connector
2 X 7/16 DIN Female IP67
Connector position
Bottom
Dimensions, HxWxD, in (mm)
72” x 12” x 6” (1829 x 305 x 152)
Mounting
Pre-mounted Tilt Brackets
Weight, with brackets, lbs (kg)
55 (25)
Weight, without brackets, lbs (kg)
44 (20)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
1380
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
150 (67)
Lightning protection
DC Ground
Operating Temperature
-40C to +60C
Radome material
PVC IP55
Packet size, HxWxD, in (mm)
87” x 16” x 10” (2082 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
66 (30)
RET
iRET AISGv1.1, MET and AISGv2.0
Brackets
7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-03
410
POWERWAVE
P65-17-XL-R
Low Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.0/14.9
TILT: 0-6
LENGTH: 96” (2438mm)
Very Low Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
Frequency band (MHz)
698-806
806-894
Gain (dBi/dBd)
16.5/14.4
17.0/14.9
Dual Linear +/- 45
Dual Linear +/- 45
Polarization
1RPLQDO,PSHGDQFH ȍ
50
50
< 1.5:1
< 1.5:1
Horizontal beam width, -3 dB (°)
70
61
Vertical beam width, -3 dB (°)
9.5
8
Side lobe suppression, vertical 1st upper (dB)
> 15
> 15
Isolation between inputs (dB)
> 30
> 30
Tracking, horizontal plane ±60° (dB)
<2
<2
Electrical Downtilt Range
0-6
0-6
Vertical beam squint (°)
< 0.5
< 0.5
Front to back ratio (dB) 180°±30° copolar
> 24
> 21
Front to back ratio (dB) 180°±30° total power
> 22
> 22
Cross polar discrimination (XPD) 0° (dB)
> 15
> 15
Cross polar discrimination (XPD) ±60° (dB)
>9
> 6.5
<-153
<-153
VSWR
IM3, 2xTx@43dBm (dBc)
Power handling, average per input (W)
500
500
Power handling, average total (W)
1000
1000
MECHANICAL SPECIFICATIONS*
Connector
2 X 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, in (mm)
96” x 12” x 6” (2438 x 305 x 152)
Mounting
Pre-mounted tilt brackets
Weight, with brackets, lbs (kg)
59 (27)
Weight, without brackets, lbs (kg)
48 (22)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
1840
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
150 (67)
Lightning protection
DC Ground
Operating Temperature
-40 - +70C
Radome material
PVC
Packet size, HxWxD, in (mm)
107” x 16” x 10” (2725 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
70 (32)
RET
iRET AISGv1.1, MET and AISGv2.0 Available
Brackets
7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-05
411
POWERWAVE
P90-14-XL-R
Low Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (°): 85
GAIN (dBi/dBd): 13.7/11.6
TILT: 2 - 15
LENGTH: 48”
Very Low Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
Frequency band (MHz)
698-806
806-894
Gain (dBi/dBd)
13.0/10.9
13.7/11.6
Dual Linear +/- 45
Dual Linear +/- 45
Polarization
1RPLQDO,PSHGDQFH ȍ
50
50
< 1.4:1
< 1.4:1
Horizontal beam width, -3 dB (°)
83
81
Vertical beam width, -3 dB (°)
18
15
Side lobe suppression, vertical 1st upper (dB)
>20
>20
Isolation between inputs (dB)
> 30
> 30
Tracking, horizontal plane ±60° (dB)
<2
<2
Electrical Downtilt Range
2 - 15
2 - 15
Vertical beam squint (°)
VSWR
< 1.25
< 1.25
Front to back ratio (dB) 180°±30° copolar
> 25
> 25
Front to back ratio (dB) 180°±30° total power
> 22
> 22
Cross polar discrimination (XPD) 0° (dB)
> 15
> 15
Cross polar discrimination (XPD) ±60° (dB)
> 10
> 10
< -153
< -153
IM3, 2xTx@43dBm (dBc)
Power handling, average per input (W)
500
500
Power handling, average total (W)
1000
1000
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female, IP67
Connector position
Bottom
Dimensions, HxWxD, in (mm)
48” x 12” x 6” (1219 x 305 x 152)
Mounting
Pre-mounted tilt brackets
Weight, with brackets, lbs (kg)
36 (16)
Weight, without brackets, lbs (kg)
25 (11)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
920
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
150 (67)
Lightning protection
DC Ground
Operating Temperature
-40C to +60C
Radome material
PVC, IP55
Packet size, HxWxD, in (mm)
58” x 16” x 10” (1475 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
44 (20)
RET
iRET AISGv1.1, MET and AISGv2.0 Available
Brackets
7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-05
412
POWERWAVE
P90-15-XL-R
Low Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 14.7/12.6
TILT: 2-11
LENGTH: 72”
Very Low Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
Frequency band (MHz)
698-806
806-894
Gain (dBi/dBd)
13.8/11.7
14.7/12.6
Polarization
Dual Linear +/- 45
1RPLQDO,PSHGDQFH ȍ
50
VSWR
< 1.4:1
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
90
81
14.9
12.2
Electrical down tilt (°)
2-11
Side lobe suppression, vertical 1st upper (dB)
> 15
Tracking, horizontal plane ±60° (dB)
<2
> 16
<2
Isolation between inputs (dB)
> 30
> 30
Vertical beam squint (°)
< 0.8
< 0.8
Front to back ratio (dB) 180°±30° copolar
> 17
> 24
Front to back ratio (dB) 180°±30° total power
> 22
> 22
Cross polar discrimination (XPD) 0° (dB)
> 15
> 15
First null fill (dB)
Cross polar discrimination (XPD) ±60° (dB)
10
IM3, 2xTx@43dBm (dBc)
10
< -153
Power handling, average per input (W)
500
Power handling, average total (W)
1000
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, in (mm)
72” x 12” x 6” (1829 x 305 x 186)
Mounting
Pre-mounted Tilt Brackets
Weight, with brackets, lbs (kg)
55 (25)
Weight, without brackets, lbs (kg)
44 (20)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
1380
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
150 (67)
Lightning protection
DC Ground
Operating Temperature
-40°C to +60°C
Radome material
PVC
Packet size, HxWxD, in (mm)
87” x 16” x 10” (2082 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
66 (30)
RET
iRET AISGv1.1, MET and AISGv2.0
Brackets
7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-05
413
POWERWAVE
P90-16-XL-R
Low Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 16.1/14.0
TILT: 0-6
LENGTH: 96” (2438mm)
Very Low Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
Frequency band (MHz)
698-806
806-894
Gain (dBi/dBd)
15.4/13.3
16.1/14.0
Dual Linear +/- 45
Dual Linear +/- 45
Polarization
1RPLQDO,PSHGDQFH ȍ
VSWR
50
50
< 1.4:1
< 1.4:1
Horizontal beam width, -3 dB (°)
86
81
Vertical beam width, -3 dB (°)
9.7
7.7
Side lobe suppression, vertical 1st upper (dB)
> 16
> 16
Isolation between inputs (dB)
> 30
> 30
Tracking, horizontal plane ±60° (dB)
<2
<2
Electrical Downtilt Range
0-6
0-6
Vertical beam squint (°)
< 0.5
< 0.5
Front to back ratio (dB) 180°±30° copolar
> 17
> 25
Front to back ratio (dB) 180°±30° total power
> 22
> 22
Cross polar discrimination (XPD) 0° (dB)
> 15
> 15
Cross polar discrimination (XPD) ±60° (dB)
IM3, 2xTx@43dBm (dBc)
10
10
<-153
<-153
Power handling, average per input (W)
500
500
Power handling, average total (W)
1000
1000
MECHANICAL SPECIFICATIONS*
Connector
2 X 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, in (mm)
96” x 12” x 7” (2438 x 305 x 182)
Mounting
Pre-mounted tilt brackets
Weight, with brackets, lbs (kg)
59 (27)
Weight, without brackets, lbs (kg)
48 (22)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
1840
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
150 (67)
Lightning protection
DC Ground
Operating Temperature
-40C to +70C
Radome material
PVC
Packet size, HxWxD, in (mm)
107” x 16” x 10” (2725 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
70 (32)
RET
iRET AISGv1.1, MET and AISGv2.0 Available
Brackets
7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-12-05
414
iRET Antennas
POWERWAVE
Dual Broadband Cross Polarized iRET 698-894/1710-2170MHz
iRET Antennas
Cross Polarized
Dual Broadband Cross Polarized iRET Antennas 698-894/1710-2170MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
65, 65
14.7/12.6, 17.0/14.9
0-13°/0-9°
1.3m (51”)
P65-15-XLH-RR
416
65, 65
15.5/13.4 17.5/15.4
2-10°/0-10°
1.8m (72”)
P65-16-XLH-RR
417
65, 65
17.2/15.1 17.5/15.4
0-6°/0-10°
2.4m (96”)
P65-17-XLH-RR
418
85, 85
13.7/11.6 15.7/13.6
0-13°/0-8°
1.2m (48”)
P90-14-XLH-RR
419
90, 90
14.5/12.4 16.3/14.2
0-11°/0-8°
1.8m (72”)
P90-15-XLH-RR
420
90, 90
16.1/14.0 16.3/14.2
0-6°/0-8°
2.4m (96”)
P90-16-XLH-RR
421
415
POWERWAVE
P65-15-XLH-RR
Dual Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65, 65
GAIN (dBi/dBd): 14.7/12.6, 17.0/14.9
TILT: 0-13, 0-9
LENGTH: 51”
Dual Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
1710-2170
Frequency band (MHz)
698-806
806-894
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
14/11.9
14.7/12.6
16.4/14.3
16.7/14.6
17.0/14,9
Polarization
Dual Linear +/- 45
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
50
50
< 1.5:1
< 1.5:1
73
Vertical beam width, -3 dB (°)
Dual Linear +/- 45
63
65
17
61
60
7.5
Electrical down tilt (°)
0-13
0-9
Side lobe suppression, vertical 1st upper (dB)
> 14
>20
Isolation between inputs (dB)
>30
> 30
Inter band Isolation (dB)
> 40
> 40
Tracking, horizontal plane ±60° (dB)
<2
<2
Vertical beam squint (°)
<1.25
< 0.5
Front to back ratio (dB) 180°±30° copolar
> 25
> 28
Front to back ratio (dB) 180°±30° total power
> 25
> 25
Cross polar discrimination (XPD) 0° (dB)
> 15
> 15
Cross polar discrimination (XPD) ±60° (dB)
> 10
> 10
IM3, 2xTx@43dBm (dBc)
-153
-153
Power handling, average per input (W)
500
300
Power handling, average total (W)
1000
600
MECHANICAL SPECIFICATIONS*
Connector
4 X 7/16 DIN Female, IP67
Connector position
Bottom
Dimensions, HxWxD, in (mm)
51” x 12” x 6” (1295 x 305 x 152)
Mounting
Pre-mounted Tilt Brackets
Weight, with brackets, lbs (kg)
41 (19)
Weight, without brackets, lbs (kg)
30 (14)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
920
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
150 (67)
Lightning protection
DC Ground
Operating Temperature
-40C to +60C
Radome material
PVC, IP55
Packet size, HxWxD, in (mm)
60” x 16” x 10” (1524 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
52 (24)
RET
iRET AISGv1.1, MET and AISGv2.0
Brackets
7256.00, 7454.00, 2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-07-02
416
POWERWAVE
P65-16-XLH-RR
Dual Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65, 65
GAIN (dBi/dBd): 15.5/13.4 17.5/15.4
TILT: 2-10, 0-10
LENGTH: 72”
Dual Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
1710-2170
Frequency band (MHz)
698-806
806-894
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
14.8/12.7
15.5/13.4
16.9/14.8
17.2/15.1
17.5/15.4
Polarization
Dual Linear +/- 45
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
Dual Linear +/- 45
50
50
< 1.5:1
< 1.5:1
66
65
60
63
63
14.7
12.5
6.8
6.4
5.7
>16
> 16
Electrical down tilt (°)
2 to 10
0 to 10
Side lobe suppression, vertical 1st upper (dB)
> 16
>16
>16
Isolation between inputs (dB)
> 30
> 30
Inter band Isolation (dB)
> 30
> 40
Tracking, horizontal plane ±60° (dB)
> 30
> 40
<2
First null fill (dB)
<2
<2
20
20
<2
20
Vertical beam squint (°)
< 0.8
< 0.8
< 0.5
< 0.5
< 0.5
Front to back ratio (dB) 180°±30° copolar
>24
>24
> 30
>30
>28
Cross polar discrimination (XPD) 0° (dB)
> 15
> 15
> 15
> 15
> 15
Cross polar discrimination (XPD) ±60° (dB)
> 10
> 10
> 10
> 10
> 10
Front to back ratio (dB) 180°±30° total power
Far field coupling
IM3, 2xTx@43dBm (dBc)
-153
-153
Power handling, average per input (W)
500
250
Power handling, average total (W)
1000
500
IM7, 2xTx@43dBm (dBc)
MECHANICAL SPECIFICATIONS*
Connector
4 X 7/16 DIN Female, IP67
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
72” x 12” x 6” (1829 x 305 x 152)
Mounting
Pre-mounted Tilt Brackets
Weight, with brackets, kg (lbs)
29 (64)
Weight, without brackets, kg (lbs)
24 (53)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1380
Maximum operational wind speed, m/s (mph)
100 (45)
Survival wind speed, m/s (mph)
150 (67)
Lightning protection
DC Ground
Operating Temperature
-40C to +60C
Radome material
PVC, IP55
Packet size, HxWxD, mm (ft)
87” x 16” x 10” (2225 x 400 x 225)
Radome colour
Light Grey
Shipping weight, kg (lbs)
34 (75)
RET
iRET AISGv1.1, MET and AISGv2.0
Brackets
7256.00, 7454.00, 2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-10-29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
417
POWERWAVE
P65-17-XLH-RR
Dual Broadband Antennas
POLARIZATION: Dual linear ±45°
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65, 65
GAIN (dBi/dBd): 17.2/15.1 17.5/15.4
TILT: 0-6, 0-10
LENGTH: 96”
Dual Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
1710-2170
Frequency band (MHz)
698-806
806-894
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
16.4/14.3
17.2/15.1
16.9/14.8
17.2/15.1
17.5/15.4
Polarization
Dual Linear +/- 45
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
50
50
< 1.5:1
< 1.5:1
70
Vertical beam width, -3 dB (°)
Dual Linear +/- 45
63
60
63
8.4
6.5
Electrical down tilt (°)
0 to 6
0 to 10
Side lobe suppression, vertical 1st upper (dB)
> 16
> 16
Isolation between inputs (dB)
> 30
> 30
Inter band Isolation (dB)
> 40
Tracking, horizontal plane ±60° (dB)
<2
<2
< 0.5
< 0.5
Front to back ratio (dB) 180°±30° copolar
25
> 30
Front to back ratio (dB) 180°±30° total power
22
> 25
> 15
> 15
Vertical beam squint (°)
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
10
10
-153
-153
Power handling, average per input (W)
500
300
Power handling, average total (W)
1000
600
IM3, 2xTx@43dBm (dBc)
60
MECHANICAL SPECIFICATIONS*
Connector
4 X 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, in (mm)
96” x 12” x 6” (2438 x 305 x 152)
Mounting
Pre-mounted Tilt Brackets
Weight, with brackets, lbs (kg)
70 (32)
Weight, without brackets, lbs (kg)
59 (27)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
1840
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
150 (67)
Lightning protection
DC Ground
Operating Temperature
Radome material
PVC
Packet size, HxWxD, in (mm)
107” x 16” x 10” (2725 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
81 (37)
RET
iRET AISGv1.1, MET and AISGv2.0 Available
Brackets
7256.00, 7454.00, 2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-05-07
418
POWERWAVE
P90-14-XLH-RR
Dual Broadband Antennas
POLARIZATION: Dual Linear ±45°
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (°): 85,85
GAIN (dBi/dBd): 13.7/11.6 15.7/13.6
TILT: 0-13, 0-8
LENGTH: 48”
Dual Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
1710-2170
Frequency band (MHz)
698-806
806-894
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
13.0/10.9
13.7/11.6
15.1/13.0
15.4/13.3
15.7/13.6
Polarization
Dual Linear +/- 45
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Dual Linear +/- 45
50
50
< 1.5:1
< 1.5:1
86
83
85
84
Vertical beam width, -3 dB (°)
15.0
Electrical down tilt (°)
0-13
0-8
Side lobe suppression, vertical 1st upper (dB)
> 12
> 16
Isolation between inputs (dB)
> 30
> 28
Inter band Isolation (dB)
> 40
Tracking, horizontal plane ±60° (dB)
<2
<2
< 1.25
< 0.5
Front to back ratio (dB) 180°±30° copolar
> 25
> 25
Front to back ratio (dB) 180°±30° total power
> 22
> 22
Cross polar discrimination (XPD) 0° (dB)
> 10
> 15
Cross polar discrimination (XPD) ±60° (dB)
> 10
> 10
IM3, 2xTx@43dBm (dBc)
-153
-153
Power handling, average per input (W)
500
300
Power handling, average total (W)
1000
600
Vertical beam squint (°)
85
7.0
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female, IP67
Connector position
Bottom
Dimensions, HxWxD, in (mm)
48” x 12” x 7.3” (1219 x 305 x 186)
Mounting
Pre-mounted Tilt Brackets
Weight, with brackets, lbs (kg)
41 (19)
Weight, without brackets, lbs (kg)
30 (14)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.0 (N)
920
Maximum operational wind speed, mph (m/s)
100 (45)
Survival wind speed, mph (m/s)
150 (67)
Lightning protection
DC Ground
Operating Temperature
-40C to +60C
Radome material
PVC, IP55
Packet size, HxWxD, in (mm)
60” x 16” x 10” (1524 x 400 x 255)
Radome colour
Light Grey
Shipping weight, lbs (kg)
52 (24)
RET
iRET AISGv1.1, MET and AISGv2.0 Available
Brackets
7256.00, 7454.00, 2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-07-02
419
POWERWAVE
P90-15-XLH-RR
Dual Broadband Antennas
POLARIZATION: Dual Linear ±45°
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (°): 90, 90
GAIN (dBi/dBd): 14.5/12.4 16.3/14.2
TILT: 0-11, 0-8
LENGTH: 72”
Dual Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
1710-2170
Frequency band (MHz)
698-806
806-894
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
13.8/11.7
14.5/12.4
15.7/13.6
16.0/13.9
16.3/14.2
Polarization
Dual Linear +/- 45
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual Linear +/- 45
50
50
< 1.5:1
< 1.5:1
Horizontal beam width, -3 dB (°)
86
84
88
80
80
Vertical beam width, -3 dB (°)
14
12
7
6.5
6
Electrical down tilt (°)
0 to 11
Side lobe suppression, vertical 1st upper (dB)
> 16
Isolation between inputs (dB)
> 30
Inter band Isolation (dB)
0 to 8
>16
>18
>17
>15
> 30
> 30
> 30
> 30
> 40
Tracking, horizontal plane ±60° (dB)
> 40
<2
<2
<2
<2
<2
First null fill (dB)
Vertical beam squint (°)
< 0.8
< 0.8
< 0.5
< 0.5
< 0.5
Front to back ratio (dB) 180°±30° copolar
25
25
> 23
> 27
> 30
Front to back ratio (dB) 180°±30° total power
22
22
> 22
> 22
> 22
> 15
> 15
> 15
> 15
> 15
10
10
10
10
10
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
IM3, 2xTx@43dBm (dBc)
-153
-153
Power handling, average per input (W)
500
300
Power handling, average total (W)
1000
600
IM7, 2xTx@43dBm (dBc)
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female, Extended Shank
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1829 x 305 x 186 (72” x 12” x 7.3”)
Mounting
Pre-mounted Tilt Brackets
Weight, with brackets, kg (lbs)
29 (64)
Weight, without brackets, kg (lbs)
24 (53)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1380
Maximum operational wind speed, m/s (mph)
100 (45)
Survival wind speed, m/s (mph)
150 (67)
Lightning protection
DC Ground
Operating Temperature
-40 to +70C
Radome material
PVC
Packet size, HxWxD, mm (ft)
2225 x 400 x 225 (87” x 16” x 10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
34 (75)
RET
iRET AISGv1.1, MET and AISGv2.0 Available
Brackets
7256.00, 7454.00, 2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-11-04
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
420
POWERWAVE
P90-16-XLH-RR
Dual Broadband Antennas
POLARIZATION: Dual Linear ±45°
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (°): 90, 90
GAIN (dBi/dBd): 16.1/14.0 16.3/14.2
TILT: 0-6, 0-8
LENGTH: 96”
Dual Broadband Antennas
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
698-894
1710-2170
Frequency band (MHz)
698-806
806-894
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
15.4/13.3
16.1/14.0
15.7/13.6
16.0/13.9
16.3/14.2
Polarization
Dual Linear +/- 45
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual Linear +/- 45
50
50
< 1.5:1
< 1.5:1
Horizontal beam width, -3 dB (°)
83
84
87
84
83
Vertical beam width, -3 dB (°)
9
8.7
6
6.6
6
Electrical down tilt (°)
0-6
Side lobe suppression, vertical 1st upper (dB)
> 16
Isolation between inputs (dB)
> 30
Inter band Isolation (dB)
0-8
>16
>16
>16
>16
> 30
> 30
> 30
> 30
> 40
Tracking, horizontal plane ±60° (dB)
> 40
<2
<2
<2
<2
<2
< 0.5
First null fill (dB)
Vertical beam squint (°)
< 0.8
< 0.8
< 0.5
< 0.5
Front to back ratio (dB) 180°±30° copolar
25
25
>21
>24
>27
Front to back ratio (dB) 180°±30° total power
22
22
> 22
> 22
> 22
> 15
> 15
> 15
> 15
> 15
10
10
10
10
10
Cross polar discrimination (XPD) 0° (dB)
Cross polar discrimination (XPD) ±60° (dB)
Far field coupling
IM3, 2xTx@43dBm (dBc)
-153
-153
Power handling, average per input (W)
500
300
Power handling, average total (W)
1000
600
IM7, 2xTx@43dBm (dBc)
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female, Extended Shank
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2438 X 305 X 152 (96 X 12 X 6)
Mounting
Pre-mounted Tilt Brackets
Weight, with brackets, kg (lbs)
32 (70)
Weight, without brackets, kg (lbs)
27 (59)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
1849
Maximum operational wind speed, m/s (mph)
100 (45)
Survival wind speed, m/s (mph)
150 (67)
Lightning protection
DC Ground
Operating Temperature
-40 to +70C
Radome material
PVC
Packet size, HxWxD, mm (ft)
2725 X 400 X 255 (107” X 16” X 10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
(37) 81
RET
iRET AISGv1.1, MET and AISGv2.0 Available
Brackets
7256.00, 7454.00, 2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-05-10
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
421
iRET Antennas
POWERWAVE
Triple Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
iRET Antennas
Cross Polarized
Triple Broadband Cross Polarized Antennas, 1710-2170 MHz
Horizontal
Beamwidth
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
Gain dBi dBd
18.3/16.2, 18.3/16.2,
18.3/16.2
18.3/16.2, 18.3/16.2,
18.3/16.2
17.7/15.6, 17.9/15.8,
18.1/16.0
14.7/12.6, 14.6/12.5,
14.6/12.5
14.7/12.6, 14.6/12.5,
14.6/12.5
14.7/12.6, 14.6/12.5,
14.6/12.5
14.7/12.6, 14.6/12.5,
14.6/12.5
14.7/12.6, 14.6/12.5,
14.6/12.5
16.2/14.1, 16.5/14.4,
16.5/14.4
14.7/12.6, 14.6/12.5,
14.6/12.5
16.2/14.1, 16.5/14.4,
16.5/14.4
16.2/14.1, 16.5/14.4,
16.5/14.4
16.2/14.1, 16.5/14.4,
16.5/14.4
16.2/14.1, 16.5/14.4,
16.5/14.4
16.2/14.1, 16.5/14.4,
16.5/14.4
16.2/14.1, 16.5/14.4,
16.5/14.4
16.2/14.1, 16.5/14.4,
16.5/14.4
17.4/15.3, 17.2/15.1,
17.5/15.4
17.4/15.3, 17.2/15.1,
17.5/15.4
17.4/15.3, 17.2/15.1,
17.5/15.4
17.4/15.3, 17.2/15.1,
17.5/15.4
17.4/15.3, 17.2/15.1,
17.5/15.4
Tilt
Length
Part Number
Page
0-10°/0-10°/0-10° 1.3m(4’3”)
8763.0ST.0000.00
424
0-10°/0-10°/0-10° 1.3m(4’3”)
8763.0ST.B100.00
425
0-10°/0-10°/0-10° 1.3m(4’3”)
8763.0ST.B400.00
426
0-20°/0-12°/0-12° 1.3m(4’3”)
8780.0ST.0000.00
427
0-20°/0-12°/0-12° 1.4m(4’7”)
8780.0ST.B100.00
428
0-20°/0-12°/0-12° 1.4m(4’7”)
8780.0ST.B100.02
429
0-20°/0-12°/0-12° 1.4m(4’7”)
8780.0ST.B100.04
430
0-20°/0-12°/0-12° 1.4m(4’7”)
8780.0ST.B400.00
431
0-20°/0-12°/0-12° 1.4m(4’7”)
8780.0ST.B400.02
432
0-20°/0-12°/0-12° 1.4m(4’7”)
8780.0ST.B400.04
433
0-20°/0-12°/0-12° 2.0m(6’6”)
8782.0ST.0000.00
434
0-20°/0-12°/0-12° 2.0m(6’6”)
8782.0ST.B100.00
435
0-20°/0-12°/0-12° 2.0m(6’6”)
8782.0ST.B100.02
436
0-20°/0-12°/0-12° 2.0m(6’6”)
8782.0ST.B100.04
437
0-20°/0-12°/0-12° 2.0m(6’6”)
8782.0ST.B400.00
438
0-20°/0-12°/0-12° 2.0m(6’6”)
8782.0ST.B400.02
439
0-20°/0-12°/0-12° 2.0m(6’6”)
8782.0ST.B400.04
440
0-10°/0-10°/0-10° 2.6m(8’6”)
8785.0ST.0000.00
441
0-10°/0-10°/0-10° 2.6m(8’6”)
8785.0ST.B100.00
442
0-10°/0-10°/0-10° 2.6m(8’6”)
8785.0ST.B100.02
443
0-10°/0-10°/0-10° 2.6m(8’6”)
8785.0ST.B100.04
444
0-10°/0-10°/0-10° 2.6m(8’6”)
8785.0ST.B400.00
445
422
iRET Antennas
POWERWAVE
Triple Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
iRET Antennas
Cross Polarized
Triple Broadband Cross Polarized Antennas, 1710-2170 MHz
Horizontal
Beamwidth
65
65
Gain dBi dBd
17.4/15.3, 17.2/15.1,
17.5/15.4
17.4/15.3, 17.2/15.1,
17.5/15.4
Tilt
Length
Part Number
Page
0-10°/0-10°/0-10° 2.6m(8’6”)
8785.0ST.B400.02
446
0-10°/0-10°/0-10° 2.6m(8’6”)
8785.0ST.B400.04
447
423
POWERWAVE
Triple Broadband Antennas
8763.0ST.0000.00
i-RET ANTENNA THBB65 1.3m UXCM-17102170-65-18i/18i/18i-Ai-D
POLARIZATION: XXX-pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.3/16.2, 18.3/16.2, 18.3/16.2
TILT: 0-10°/0-10°/0-10°
LENGTH: 1.3m(51”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.6/15.5
18.0/15.9
18.3/16.2
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
64
Vertical beam width, -3 dB (°)
7.0
6.6
6.3
>18,18,16,16,14,12 @0,2,4,6,8,10
>18,18,16,16,14,12 @0,2,4,6,8,10
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-24 typical >-17
Electrical down tilt (°)
0-10
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
>18,18,16,16,14,12 @0,2,4,6,8,10
>-24 typical >-17
>-24 typical >-17
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>18
>14
>12
<-153
<-153
Far field coupling
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
250
Power handling, average total (W)
1500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1310 x 524 x 101 (52 x 21 x 4 inch)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
27.1 (60)
Weight, without brackets, kg (lbs)
21.6 (47.5)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
800 / 75 / 884
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
70 (156)
Lightning protection
DC Grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1550 x 610 x 229 (61 x 24 x 9 inch)
Shipping weight, kg (lbs)
33.1 (73)
RET
No iRET module attached [8510.40]
Brackets
7456.00A, 2210.10, 7455.00, 7458.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.02 / Mar 19 2010
Updated: 2010-04-09
424
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Triple Broadband Antennas
8763.0ST.B100.00
i-RET ANTENNA THBB65 1.3m UXCM-17102170-65-18i/18i/18i-Ai-D AISGv1.1
POLARIZATION: XXX-pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.3/16.2, 18.3/16.2, 18.3/16.2
TILT: 0-10°/0-10°/0-10°
LENGTH: 1.3m(51”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.6/15.5
18.0/15.9
18.3/16.2
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
64
Vertical beam width, -3 dB (°)
7.0
6.6
6.3
>18,18,16,16,14,12 @0,2,4,6,8,10
>18,18,16,16,14,12 @0,2,4,6,8,10
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-24 typical >-17
Electrical down tilt (°)
0-10
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
>18,18,16,16,14,12 @0,2,4,6,8,10
>-24 typical >-17
>-24 typical >-17
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>18
>14
>12
<-153
<-153
Far field coupling
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
250
Power handling, average total (W)
1500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 6xAISG [3x i-RET 8510.40]
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1310 x 524 x 101 (52 x 21 x 4 inch)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
28.6 (63)
Weight, without brackets, kg (lbs)
23.1 (51)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
800 / 75 / 884
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
70 (156)
Lightning protection
DC Grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1550 x 610 x 229 (61 x 24 x 9 inch)
Shipping weight, kg (lbs)
34.6 (76)
RET
AISG1.1 (AISG2.0/Ericsson)
Brackets
7456.00A, 2210.10, 7455.00, 7458.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.02 / Mar 19 2010
Updated: 2010-04-09
425
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Triple Broadband Antennas
8763.0ST.B400.00
i-RET ANTENNA THBB65 1.3m UXCM-17102170-65-18i/18i/18i-Ai-D AISGv2.0
POLARIZATION: XXX-pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.3/16.2, 18.3/16.2, 18.3/16.2
TILT: 0-10°/0-10°/0-10°
LENGTH: 1.3m(51”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.6/15.5
18.0/15.9
18.3/16.2
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
64
Vertical beam width, -3 dB (°)
7.0
6.6
6.3
>18,18,16,16,14,12 @0,2,4,6,8,10
>18,18,16,16,14,12 @0,2,4,6,8,10
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-24 typical >-17
Electrical down tilt (°)
0-10
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
>18,18,16,16,14,12 @0,2,4,6,8,10
>-24 typical >-17
>-24 typical >-17
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>18
>14
>12
<-153
<-153
Far field coupling
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
250
Power handling, average total (W)
1500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 6xAISG [3x i-RET 8510.40]
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1310 x 524 x 101 (52 x 21 x 4 inch)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
28.6 (63)
Weight, without brackets, kg (lbs)
23.1 (51)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
800 / 75 / 884
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
70 (156)
Lightning protection
DC Grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1550 x 610 x 229 (61 x 24 x 9 inch)
Shipping weight, kg (lbs)
34.6 (76)
RET
AISG2.0 (AISG1.1/Ericsson)
Brackets
7456.00A, 2210.10, 7455.00, 7458.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.02 / Mar19 2010
Updated: 2010-04-09
426
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Triple Broadband Antennas
8780.0ST.0000.00
i-RET ANTENNA TBB65 1.4m ALXT-824960/1710-2170-65-14.7i/15i/15i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20°/0-12°/0-12°
LENGTH: 1.4m(4’7”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
14.1/12
14.7/12.6
14.4/12.3
14.6/12.5
14.8/12.7
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
Dual linear ±45°
50
50
<1.5:1
<1.5:1
71
67
65
64
64
14.9
13.9
13.3
12.6
12
Electrical down tilt (°)
0 - 20
Side lobe suppression, vertical 1st upper (dB)
0 - 12
>18,17,16,16@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
2,4,8,12
2,4,8,12
0,4,8,12
0,4,8,12
0,4,8,12
>30
>30
>30
>30
>30
Isolation between inputs (dB)
Inter band Isolation (dB)
>38
>38
Tracking, horizontal plane ±60° (dB)
<1
<2
<1.5
<1.2
<4
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.7
0.7
0.7
1
1
Front to back ratio (dB) 180°±30° copolar
>27
>28
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>24
>24
>24
>24
>24
Cross polar discrimination (XPD) 0° (dB)
15
14
16
18
18
Cross polar discrimination (XPD) ±60° (dB)
> 9.3
>7.7
>6
>5.5
> 5.5
Far field coupling
< 0.35
< 0.50
< 0.55
< 0.74
< 0.74
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1408x280x155mm (4’7”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
17.5 (38.6)
Weight, without brackets, kg (lbs)
12 (26.4)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
1550x355x200 (5’1”x1’2”x7”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
21.5 (47.4)
RET
No iRET module attached
Brackets
7256.00, 2210.10, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Dec 20 2009
Updated: 2010-06-29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
427
POWERWAVE
Triple Broadband Antennas
8780.0ST.B100.00
i-RET ANTENNA TBB65 1.4m ALXT-824960/1710-2170-65-14.7i/15i/15i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20°/0-12°/0-12°
LENGTH: 1.4m(4’7”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
14.1/12
14.7/12.6
14.4/12.3
14.6/12.5
14.8/12.7
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
Dual linear ±45°
50
50
<1.5:1
<1.5:1
71
67
65
64
64
14.9
13.9
13.3
12.6
12
Electrical down tilt (°)
0 - 20
Side lobe suppression, vertical 1st upper (dB)
0 - 12
>18,17,16,16@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
2,4,8,12
2,4,8,12
0,4,8,12
0,4,8,12
0,4,8,12
>30
>30
>30
>30
>30
Isolation between inputs (dB)
Inter band Isolation (dB)
>38
>38
Tracking, horizontal plane ±60° (dB)
<1
<2
<1.5
<1.2
<4
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.7
0.7
0.7
1
1
Front to back ratio (dB) 180°±30° copolar
>27
>28
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>24
>24
>24
>24
>24
Cross polar discrimination (XPD) 0° (dB)
15
14
16
18
18
Cross polar discrimination (XPD) ±60° (dB)
> 9.3
>7.7
>6
>5.5
> 5.5
Far field coupling
< 0.35
< 0.50
< 0.55
< 0.74
< 0.74
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 6x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1408x280x155mm (4’7”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
19 (42)
Weight, without brackets, kg (lbs)
13.5 (30)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
1550x355x200 (5’1”x1’2”x7”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
23 (50.7)
RET
AISG1.1 (AISG2.0/Ericsson)
Brackets
7256.00, 2210.10, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Dec 20 2009
Updated: 2010-06-29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
428
POWERWAVE
Triple Broadband Antennas
8780.0ST.B100.02
i-RET ANTENNA TBB65 1.4m ALXT-824960/1710-2170-65-14.7i/15i/15i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20°/0-12°/0-12°
LENGTH: 1.4m(4’7”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
14.1/12
14.7/12.6
14.4/12.3
14.6/12.5
14.8/12.7
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
Dual linear ±45°
50
50
<1.5:1
<1.5:1
71
67
65
64
64
14.9
13.9
13.3
12.6
12
Electrical down tilt (°)
0 - 20
Side lobe suppression, vertical 1st upper (dB)
0 - 12
>18,17,16,16@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
2,4,8,12
2,4,8,12
0,4,8,12
0,4,8,12
0,4,8,12
>30
>30
>30
>30
>30
Isolation between inputs (dB)
Inter band Isolation (dB)
>38
>38
Tracking, horizontal plane ±60° (dB)
<1
<2
<1.5
<1.2
<4
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.7
0.7
0.7
1
1
Front to back ratio (dB) 180°±30° copolar
>27
>28
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>24
>24
>24
>24
>24
Cross polar discrimination (XPD) 0° (dB)
15
14
16
18
18
Cross polar discrimination (XPD) ±60° (dB)
> 9.3
>7.7
>6
>5.5
> 5.5
Far field coupling
< 0.35
< 0.50
< 0.55
< 0.74
< 0.74
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 2x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1408x280x155mm (4’7”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
18 (39.6)
Weight, without brackets, kg (lbs)
12.5 (27.5)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
1550x355x200 (5’1”x1’2”x7”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
22 (48.5)
RET
AISG1.1 (AISG2.0/Ericsson) on WHITE system
Brackets
7256.00, 2210.10, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Dec 20 2009
Updated: 2010-06-29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
429
POWERWAVE
Triple Broadband Antennas
8780.0ST.B100.04
i-RET ANTENNA TBB65 1.4m ALXT-824960/1710-2170-65-14.7i/15i/15i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20°/0-12°/0-12°
LENGTH: 1.4m(4’7”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
14.1/12
14.7/12.6
14.4/12.3
14.6/12.5
14.8/12.7
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
Dual linear ±45°
50
50
<1.5:1
<1.5:1
71
67
65
64
64
14.9
13.9
13.3
12.6
12
Electrical down tilt (°)
0 - 20
Side lobe suppression, vertical 1st upper (dB)
0 - 12
>18,17,16,16@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
2,4,8,12
2,4,8,12
0,4,8,12
0,4,8,12
0,4,8,12
>30
>30
>30
>30
>30
Isolation between inputs (dB)
Inter band Isolation (dB)
>38
>38
Tracking, horizontal plane ±60° (dB)
<1
<2
<1.5
<1.2
<4
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.7
0.7
0.7
1
1
Front to back ratio (dB) 180°±30° copolar
>27
>28
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>24
>24
>24
>24
>24
Cross polar discrimination (XPD) 0° (dB)
15
14
16
18
18
Cross polar discrimination (XPD) ±60° (dB)
> 9.3
>7.7
>6
>5.5
> 5.5
Far field coupling
< 0.35
< 0.50
< 0.55
< 0.74
< 0.74
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 4x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1408x280x155mm (4’7”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
18.5 (40.9)
Weight, without brackets, kg (lbs)
13 (28.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
1550x355x200 (5’1”x1’2”x7”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
22.5 (49.6)
RET
AISG1.1 (AISG2.0/Ericsson) on RED & WHITE
system
7256.00, 2210.10, 7454.00A
Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Dec 20 2009
Updated: 2010-06-29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
430
POWERWAVE
8780.0ST.B400.00
Triple Broadband Antennas
i-RET ANTENNA TBB65 1.4m ALXT-824960/1710-2170-65-14.7i/15i/15i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20°/0-12°/0-12°
LENGTH: 1.4m(4’7”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
14.1/12
14.7/12.6
14.4/12.3
14.6/12.5
14.8/12.7
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
50
50
<1.5:1
<1.5:1
71
67
65
64
64
14.9
13.9
13.3
12.6
12
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
Dual linear ±45°
0 - 20
0 - 12
>18,17,16,16@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
2,4,8,12
2,4,8,12
0,4,8,12
0,4,8,12
0,4,8,12
>30
>30
>30
>30
>30
Isolation between inputs (dB)
Inter band Isolation (dB)
>38
>38
Tracking, horizontal plane ±60° (dB)
<1
<2
<1.5
<1.2
<4
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.7
0.7
0.7
1
1
Front to back ratio (dB) 180°±30° copolar
>27
>28
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>24
>24
>24
>24
>24
Cross polar discrimination (XPD) 0° (dB)
15
14
16
18
18
Cross polar discrimination (XPD) ±60° (dB)
> 9.3
>7.7
>6
>5.5
> 5.5
Far field coupling
< 0.35
< 0.50
< 0.55
< 0.74
< 0.74
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 6x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1408x280x155mm (4’7”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
19 (42)
Weight, without brackets, kg (lbs)
13.5 (30)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
1550x355x200 (5’1”x1’2”x7”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
23 (50.7)
RET
AISG2.0 (AISG1.1/Ericsson)
Brackets
7256.00, 2210.10, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-06-29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
431
POWERWAVE
Triple Broadband Antennas
8780.0ST.B400.02
i-RET ANTENNA TBB65 1.4m ALXT-824960/1710-2170-65-14.7i/15i/15i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20°/0-12°/0-12°
LENGTH: 1.4m(4’7”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
14.1/12
14.7/12.6
14.4/12.3
14.6/12.5
14.8/12.7
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
Dual linear ±45°
50
50
<1.5:1
<1.5:1
71
67
65
64
64
14.9
13.9
13.3
12.6
12
Electrical down tilt (°)
0 - 20
Side lobe suppression, vertical 1st upper (dB)
0 - 12
>18,17,16,16@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
2,4,8,12
2,4,8,12
0,4,8,12
0,4,8,12
0,4,8,12
>30
>30
>30
>30
>30
Isolation between inputs (dB)
Inter band Isolation (dB)
>38
>38
Tracking, horizontal plane ±60° (dB)
<1
<2
<1.5
<1.2
<4
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.7
0.7
0.7
1
1
Front to back ratio (dB) 180°±30° copolar
>27
>28
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>24
>24
>24
>24
>24
Cross polar discrimination (XPD) 0° (dB)
15
14
16
18
18
Cross polar discrimination (XPD) ±60° (dB)
> 9.3
>7.7
>6
>5.5
> 5.5
Far field coupling
< 0.35
< 0.50
< 0.55
< 0.74
< 0.74
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 2x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1408x280x155mm (4’7”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
18 (39.6)
Weight, without brackets, kg (lbs)
12.5 (27.5)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
1550x355x200 (5’1”x1’2”x7”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
22 (48.5)
RET
AISG2.0 (AISG1.1/Ericsson) on WHITE system
Brackets
7256.00, 2210.10, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Dec 20 2009
Updated: 2010-06-29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
432
POWERWAVE
Triple Broadband Antennas
8780.0ST.B400.04
i-RET ANTENNA TBB65 1.4m ALXT-824960/1710-2170-65-14.7i/15i/15i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20°/0-12°/0-12°
LENGTH: 1.4m(4’7”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
14.1/12
14.7/12.6
14.4/12.3
14.6/12.5
14.8/12.7
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
Dual linear ±45°
50
50
<1.5:1
<1.5:1
71
67
65
64
64
14.9
13.9
13.3
12.6
12
Electrical down tilt (°)
0 - 20
Side lobe suppression, vertical 1st upper (dB)
0 - 12
>18,17,16,16@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
>17,16,15,14@
2,4,8,12
2,4,8,12
0,4,8,12
0,4,8,12
0,4,8,12
>30
>30
>30
>30
>30
Isolation between inputs (dB)
Inter band Isolation (dB)
>38
>38
Tracking, horizontal plane ±60° (dB)
<1
<2
<1.5
<1.2
<4
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.7
0.7
0.7
1
1
Front to back ratio (dB) 180°±30° copolar
>27
>28
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>24
>24
>24
>24
>24
Cross polar discrimination (XPD) 0° (dB)
15
14
16
18
18
Cross polar discrimination (XPD) ±60° (dB)
> 9.3
>7.7
>6
>5.5
> 5.5
Far field coupling
< 0.35
< 0.50
< 0.55
< 0.74
< 0.74
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 4x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1408x280x155mm (4’7”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
18.5 (40.9)
Weight, without brackets, kg (lbs)
13 (28.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
1550x355x200 (5’1”x1’2”x7”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
22.5 (49.6)
RET
AISG2.0 (AISG1.1/Ericsson) on RED & WHITE
system
7256.00, 2210.10, 7454.00A
Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Dec 20 2009
Updated: 2010-06-29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
433
POWERWAVE
Triple Broadband Antennas
8782.0ST.0000.00
i-RET ANTENNA TBB65 2.0m ALXT-824960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12°/0-12°/0-12°
LENGTH: 2.0m(6’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
15.8/13.7
16.2/14.1
16.0/13.9
16.1/14
16.5/14.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
71
67
65
65
63
Vertical beam width, -3 dB (°)
9.6
8.6
10
9.4
8.7
>18,17,16,16@
>18,17,16,16@
>17,15,13@
>17,15,14@
>17,16,15@
2,5,7,8
2,5,7,8
0,6,10
0,6,10
0,6,10
>30
>30
>30
>30
>30
Electrical down tilt (°)
0-12
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0-12
>34
Tracking, horizontal plane ±60° (dB)
>34
<1.0
<1
<1.5
<2
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>30
>27
>28
>30
Front to back ratio (dB) 180°±30° total power
>26
>26
>25
>27
>27
Cross polar discrimination (XPD) 0° (dB)
16
15
16
16
15
Cross polar discrimination (XPD) ±60° (dB)
>11
>9.2
>6.7
>6.3
>6.3
<0.47
<0.52
<0.66
<0.66
Far field coupling
<0.27
IM3, 2xTx@43dBm (dBc)
<-153
<4
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2033x280x155mm (6’8”x11”x6”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
21.9 (48.2)
Weight, without brackets, kg (lbs)
16.4 (36.1)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
2175x355x255 (7’2”x14”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
26.5 (58.4)
RET
No iRET module attached
Brackets
7256.00,7454.00A,2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.0 / Dec 20 2009
Updated: 2010-06-29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
434
POWERWAVE
Triple Broadband Antennas
8782.0ST.B100.00
i-RET ANTENNA TBB65 2.0m ALXT-824960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12°/0-12°/0-12°
LENGTH: 2.0m(6’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
15.8/13.7
16.2/14.1
16.0/13.9
16.1/14
16.5/14.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
71
67
65
65
63
Vertical beam width, -3 dB (°)
9.6
8.6
10
9.4
8.7
>18,17,16,16@
>18,17,16,16@
>17,15,13@
>17,15,14@
>17,16,15@
2,5,7,8
2,5,7,8
0,6,10
0,6,10
0,6,10
>30
>30
>30
>30
>30
Electrical down tilt (°)
0-12
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0-12
>34
Tracking, horizontal plane ±60° (dB)
>34
<1.0
<1
<1.5
<2
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>30
>27
>28
>30
Front to back ratio (dB) 180°±30° total power
>26
>26
>25
>27
>27
Cross polar discrimination (XPD) 0° (dB)
16
15
16
16
15
Cross polar discrimination (XPD) ±60° (dB)
>11
>9.2
>6.7
>6.3
>6.3
<0.47
<0.52
<0.66
<0.66
Far field coupling
<0.27
IM3, 2xTx@43dBm (dBc)
<-153
<4
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 6x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2033x280x155mm (6’8”x11”x6”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
23.4 (48)
Weight, without brackets, kg (lbs)
17.9 (39)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
2175x355x255 (7’2”x14”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
28 (61.7)
RET
AISG1.1 (AISG2.0/Ericsson)
Brackets
7256.00,7454.00A,2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.0 / Dec 20 2009
Updated: 2010-06-29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
435
POWERWAVE
Triple Broadband Antennas
8782.0ST.B100.02
i-RET ANTENNA TBB65 2.0m ALXT-824960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12°/0-12°/0-12°
LENGTH: 2.0m(6’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
15.8/13.7
16.2/14.1
16.0/13.9
16.1/14
16.5/14.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
71
67
65
65
63
Vertical beam width, -3 dB (°)
9.6
8.6
10
9.4
8.7
>18,17,16,16@
>18,17,16,16@
>17,15,13@
>17,15,14@
>17,16,15@
2,5,7,8
2,5,7,8
0,6,10
0,6,10
0,6,10
>30
>30
>30
>30
>30
Electrical down tilt (°)
0 - 12
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0 - 12
>34
Tracking, horizontal plane ±60° (dB)
>34
<1.0
<1
<1.5
<2
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>30
>27
>28
>30
Front to back ratio (dB) 180°±30° total power
>26
>26
>25
>27
>27
Cross polar discrimination (XPD) 0° (dB)
16
15
16
16
15
Cross polar discrimination (XPD) ±60° (dB)
>11
>9.2
>6.7
>6.3
>6.3
<0.47
<0.52
<0.66
<0.66
Far field coupling
<0.27
IM3, 2xTx@43dBm (dBc)
<-153
<4
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 2x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2033x280x155mm (6’8”x11”x6”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
22.4 (49.3)
Weight, without brackets, kg (lbs)
16.9 (37.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
2175x355x255 (7’2”x14”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
27 (59.5)
RET
AISG1.1 (AISG2.0/Ericsson) on WHITE system
Brackets
7256.00,7454.00A,2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.0 / Dec 20 2009
Updated: 2010-06-29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
436
POWERWAVE
Triple Broadband Antennas
8782.0ST.B100.04
i-RET ANTENNA TBB65 2.0m ALXT-824960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12°/0-12°/0-12°
LENGTH: 2.0m(6’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
15.8/13.7
16.2/14.1
16.0/13.9
16.1/14
16.5/14.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
71
67
65
65
63
Vertical beam width, -3 dB (°)
9.6
8.6
10
9.4
8.7
>18,17,16,16@
>18,17,16,16@
>17,15,13@
>17,15,14@
>17,16,15@
2,5,7,8
2,5,7,8
0,6,10
0,6,10
0,6,10
>30
>30
>30
>30
>30
Electrical down tilt (°)
0 - 12
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0 - 12
>34
Tracking, horizontal plane ±60° (dB)
>34
<1.0
<1
<1.5
<2
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>30
>27
>28
>30
Front to back ratio (dB) 180°±30° total power
>26
>26
>25
>27
>27
Cross polar discrimination (XPD) 0° (dB)
16
15
16
16
15
Cross polar discrimination (XPD) ±60° (dB)
>11
>9.2
>6.7
>6.3
>6.3
<0.47
<0.52
<0.66
<0.66
Far field coupling
<0.27
IM3, 2xTx@43dBm (dBc)
<-153
<4
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 4x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2033x280x155mm (6’8”x11”x6”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
22.9 (50.4)
Weight, without brackets, kg (lbs)
17.4 (38.3)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
2175x355x255 (7’2”x14”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
27.5 (60.6)
RET
AISG1.1 (AISG2.0/Ericsson) on RED & WHITE
system
7256.00,7454.00A,2210.00
Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.0 / Dec 20 2009
Updated: 2010-06-29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
437
POWERWAVE
Triple Broadband Antennas
8782.0ST.B400.00
i-RET ANTENNA TBB65 2.0m ALXT-824960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12°/0-12°/0-12°
LENGTH: 2.0m(6’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
15.8/13.7
16.2/14.1
16.0/13.9
16.1/14
16.5/14.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
71
67
65
65
63
Vertical beam width, -3 dB (°)
9.6
8.6
10
9.4
8.7
>18,17,16,16@
>18,17,16,16@
>17,15,13@
>17,15,14@
>17,16,15@
2,5,7,8
2,5,7,8
0,6,10
0,6,10
0,6,10
>30
>30
>30
>30
>30
Electrical down tilt (°)
0 - 12
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0 - 12
>34
Tracking, horizontal plane ±60° (dB)
>34
<1.0
<1
<1.5
<2
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>30
>27
>28
>30
Front to back ratio (dB) 180°±30° total power
>26
>26
>25
>27
>27
Cross polar discrimination (XPD) 0° (dB)
16
15
16
16
15
Cross polar discrimination (XPD) ±60° (dB)
>11
>9.2
>6.7
>6.3
>6.3
<0.47
<0.52
<0.66
<0.66
Far field coupling
<0.27
IM3, 2xTx@43dBm (dBc)
<-153
<4
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 6x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2033x280x155mm (6’8”x11”x6”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
23.4 (48)
Weight, without brackets, kg (lbs)
17.9 (39)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
2175x355x255 (7’2”x14”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
28 (61.7)
RET
AISG2.0 (AISG1.1/Ericsson)
Brackets
7256.00,7454.00A,2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Dec 20 2009
Updated: 2010-06-29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
438
POWERWAVE
Triple Broadband Antennas
8782.0ST.B400.02
i-RET ANTENNA TBB65 2.0m ALXT-824960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12°/0-12°/0-12°
LENGTH: 2.0m(6’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
15.8/13.7
16.2/14.1
16.0/13.9
16.1/14
16.5/14.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
71
67
65
65
63
Vertical beam width, -3 dB (°)
9.6
8.6
10
9.4
8.7
>18,17,16,16@
>18,17,16,16@
>17,15,13@
>17,15,14@
>17,16,15@
2,5,7,8
2,5,7,8
0,6,10
0,6,10
0,6,10
>30
>30
>30
>30
>30
Electrical down tilt (°)
0 - 12
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0 - 12
>34
Tracking, horizontal plane ±60° (dB)
>34
<1.0
<1
<1.5
<2
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>30
>27
>28
>30
Front to back ratio (dB) 180°±30° total power
>26
>26
>25
>27
>27
Cross polar discrimination (XPD) 0° (dB)
16
15
16
16
15
Cross polar discrimination (XPD) ±60° (dB)
>11
>9.2
>6.7
>6.3
>6.3
<0.47
<0.52
<0.66
<0.66
Far field coupling
<0.27
IM3, 2xTx@43dBm (dBc)
<-153
<4
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 2x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2033x280x155mm (6’8”x11”x6”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
22.4 (49.3)
Weight, without brackets, kg (lbs)
16.9 (37.2)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
2175x355x255 (7’2”x14”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
27 (59.5)
RET
AISG2.0 (AISG1.1/Ericsson) on WHITE system
Brackets
7256.00,7454.00A,2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.0 / Dec 20 2009
Updated: 2010-06-29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
439
POWERWAVE
Triple Broadband Antennas
8782.0ST.B400.04
i-RET ANTENNA TBB65 2.0m ALXT-824960/1710-2170-65-16.2i/16.5i/16.5i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12°/0-12°/0-12°
LENGTH: 2.0m(6’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
15.8/13.7
16.2/14.1
16.0/13.9
16.1/14
16.5/14.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
71
67
65
65
63
Vertical beam width, -3 dB (°)
9.6
8.6
10
9.4
8.7
>18,17,16,16@
>18,17,16,16@
>17,15,13@
>17,15,14@
>17,16,15@
2,5,7,8
2,5,7,8
0,6,10
0,6,10
0,6,10
>30
>30
>30
>30
>30
Electrical down tilt (°)
0 - 12
Side lobe suppression, vertical 1st upper (dB)
Isolation between inputs (dB)
Inter band Isolation (dB)
0 - 12
>34
Tracking, horizontal plane ±60° (dB)
>34
<1.0
<1
<1.5
<2
First null fill (dB)
25
25
25
25
25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>30
>27
>28
>30
Front to back ratio (dB) 180°±30° total power
>26
>26
>25
>27
>27
Cross polar discrimination (XPD) 0° (dB)
16
15
16
16
15
Cross polar discrimination (XPD) ±60° (dB)
>11
>9.2
>6.7
>6.3
>6.3
<0.47
<0.52
<0.66
<0.66
Far field coupling
<0.27
IM3, 2xTx@43dBm (dBc)
<-153
<4
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 4x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2033x280x155mm (6’8”x11”x6”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
22.9 (50.4)
Weight, without brackets, kg (lbs)
17.4 (38.3)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
2175x355x255 (7’2”x14”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
27.5 (60.6)
RET
AISG2.0 (AISG1.1/Ericsson) on RED & WHITE
system
7256.00,7454.00A,2210.00
Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.0 / Dec 20 2009
Updated: 2010-06-29
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
440
POWERWAVE
Triple Broadband Antennas
8785.0ST.0000.00
i-RET ANTENNA TBB65 2.6m ALXT-824960/1710-2170-65-17.3i/18i/18i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10°/0-10°/0-10°
LENGTH: 2.6m(8’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
17.4/15.3
17.4/15.3
17.2/15.1
17.2/15.1
17.5/15.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
65
65
65
65
62
Vertical beam width, -3 dB (°)
7
7
7
7
6
Electrical down tilt (°)
0-10
Side lobe suppression, vertical 1st upper (dB)
>17
Isolation between inputs (dB)
30
Inter band Isolation (dB)
0-10
>17
>17
>17
>17
30
30
30
30
38
Tracking, horizontal plane ±60° (dB)
First null fill (dB)
38
<2.0
<2.0
<1.5
<1.5
<1.5
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>28
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
>27
>25
Cross polar discrimination (XPD) 0° (dB)
16
15
16
15
17
Cross polar discrimination (XPD) ±60° (dB)
>12
>9.5
>7.0
>7.5
>7.7
<0.44
<0.47
<0.52
<0.52
Far field coupling
<0.24
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2658x280x155mm(8’8”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
26.2(57.7)
Weight, without brackets, kg (lbs)
20.7(45.6)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph)
42(93)
Survival wind speed, m/s (mph)
55(123)
Lightning protection
DC Grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
2800x355x255(9’2”x1’2”x10”)
Radome colour
Light Gray
Shipping weight, kg (lbs)
31.5(69.4)
RET
No iRET module attached
Brackets
7256.00, 2210.10, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.0 / Dec 20 2009
Updated: 2009-07-30
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
441
POWERWAVE
Triple Broadband Antennas
8785.0ST.B100.00
i-RET ANTENNA TBB65 2.6m ALXT-824960/1710-2170-65-17.3i/18i/18i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10°/0-10°/0-10°
LENGTH: 2.6m(8’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
17.4/15.3
17.4/15.3
17.2/15.1
17.2/15.1
17.5/15.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
65
65
65
65
62
Vertical beam width, -3 dB (°)
7
7
7
7
6
Electrical down tilt (°)
0-10
Side lobe suppression, vertical 1st upper (dB)
>17
Isolation between inputs (dB)
30
Inter band Isolation (dB)
0-10
>17
>17
>17
>17
30
30
30
30
38
Tracking, horizontal plane ±60° (dB)
First null fill (dB)
38
<2.0
<2.0
<1.5
<1.5
<1.5
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>28
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
>27
>25
Cross polar discrimination (XPD) 0° (dB)
16
15
16
15
17
Cross polar discrimination (XPD) ±60° (dB)
>12
>9.5
>7.0
>7.5
>7.7
<0.44
<0.47
<0.52
<0.52
Far field coupling
<0.24
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 6x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2658x280x155mm(8’8”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
27.7(61)
Weight, without brackets, kg (lbs)
22.2(49)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph)
42(93)
Survival wind speed, m/s (mph)
55(123)
Lightning protection
DC Grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
2800x355x255(9’2”x1’2”x10”)
Radome colour
Light Gray
Shipping weight, kg (lbs)
33(72.7)
RET
AISG1.1 (AISG2.0/Ericsson)
Brackets
7256.00, 2210.10, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Dec 20 2009
Updated: 2009-07-30
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
442
POWERWAVE
Triple Broadband Antennas
8785.0ST.B100.02
i-RET ANTENNA TBB65 2.6m ALXT-824960/1710-2170-65-17.3i/18i/18i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10°/0-10°/0-10°
LENGTH: 2.6m(8’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
17.4/15.3
17.4/15.3
17.2/15.1
17.2/15.1
17.5/15.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
65
65
65
65
62
Vertical beam width, -3 dB (°)
7
7
7
7
6
Electrical down tilt (°)
0 - 10
Side lobe suppression, vertical 1st upper (dB)
>17
Isolation between inputs (dB)
30
Inter band Isolation (dB)
0 - 10
>17
>17
>17
>17
30
30
30
30
38
Tracking, horizontal plane ±60° (dB)
First null fill (dB)
38
<2.0
<2.0
<1.5
<1.5
<1.5
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>28
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
>27
>25
Cross polar discrimination (XPD) 0° (dB)
16
15
16
15
17
Cross polar discrimination (XPD) ±60° (dB)
>12
>9.5
>7.0
>7.5
>7.7
<0.44
<0.47
<0.52
<0.52
Far field coupling
<0.24
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 2x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2658x280x155mm(8’8”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
26.7(58.8)
Weight, without brackets, kg (lbs)
21.2(46.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph)
42(93)
Survival wind speed, m/s (mph)
55(123)
Lightning protection
DC Grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
2800x355x255(9’2”x1’2”x10”)
Radome colour
Light Gray
Shipping weight, kg (lbs)
32(70.5)
RET
AISG1.1 (AISG2.0/Ericsson) on WHITE system
Brackets
7256.00, 2210.10, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.0 / Dec 20 2009
Updated: 2009-07-30
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
443
POWERWAVE
8785.0ST.B100.04
Triple Broadband Antennas
i-RET ANTENNA TBB65 2.6m ALXT-824960/1710-2170-65-17.3i/18i/18i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10°/0-10°/0-10°
LENGTH: 2.6m(8’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
17.4/15.3
17.4/15.3
17.2/15.1
17.2/15.1
17.5/15.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
65
65
65
65
62
Vertical beam width, -3 dB (°)
7
7
7
7
6
Electrical down tilt (°)
0 - 10
Side lobe suppression, vertical 1st upper (dB)
>17
Isolation between inputs (dB)
30
Inter band Isolation (dB)
>17
>17
>17
>17
30
30
30
30
38
Tracking, horizontal plane ±60° (dB)
First null fill (dB)
0 - 10
38
<2.0
<2.0
<1.5
<1.5
<1.5
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>28
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
>27
>25
Cross polar discrimination (XPD) 0° (dB)
16
15
16
15
17
Cross polar discrimination (XPD) ±60° (dB)
>12
>9.5
>7.0
>7.5
>7.7
<0.44
<0.47
<0.52
<0.52
Far field coupling
<0.24
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 4x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2658x280x155mm(8’8”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
27.2(59.9)
Weight, without brackets, kg (lbs)
21.7(47.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph)
42(93)
Survival wind speed, m/s (mph)
55(123)
Lightning protection
DC Grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
2800x355x255(9’2”x1’2”x10”)
Radome colour
Light Gray
Shipping weight, kg (lbs)
32.5(71.7)
RET
AISG1.1 (AISG2.0/Ericsson) on RED & WHITE
system
7256.00, 2210.10, 7454.00A
Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-08-04
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
444
POWERWAVE
Triple Broadband Antennas
8785.0ST.B400.00
i-RET ANTENNA TBB65 2.6m ALXT-824960/1710-2170-65-17.3i/18i/18i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10°/0-10°/0-10°
LENGTH: 2.6m(8’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
17.4/15.3
17.4/15.3
17.2/15.1
17.2/15.1
17.5/15.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
65
65
65
65
62
Vertical beam width, -3 dB (°)
7
7
7
7
6
Electrical down tilt (°)
0 - 10
Side lobe suppression, vertical 1st upper (dB)
>17
Isolation between inputs (dB)
30
Inter band Isolation (dB)
0 - 10
>17
>17
>17
>17
30
30
30
30
38
Tracking, horizontal plane ±60° (dB)
First null fill (dB)
38
<2.0
<2.0
<1.5
<1.5
<1.5
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>28
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
>27
>25
Cross polar discrimination (XPD) 0° (dB)
16
15
16
15
17
Cross polar discrimination (XPD) ±60° (dB)
>12
>9.5
>7.0
>7.5
>7.7
<0.44
<0.47
<0.52
<0.52
Far field coupling
<0.24
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 6x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2658x280x155mm(8’8”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
27.7(61)
Weight, without brackets, kg (lbs)
22.2(49)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph)
42(93)
Survival wind speed, m/s (mph)
55(123)
Lightning protection
DC Grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
2800x355x255(9’2”x1’2”x10”)
Radome colour
Light Gray
Shipping weight, kg (lbs)
33(72.7)
RET
AISG2.0 (AISG1.1/Ericsson)
Brackets
7256.00, 2210.10, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.01 / Dec 20 2009
Updated: 2009-07-30
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
445
POWERWAVE
Triple Broadband Antennas
8785.0ST.B400.02
i-RET ANTENNA TBB65 2.6m ALXT-824960/1710-2170-65-17.3i/18i/18i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10°/0-10°/0-10°
LENGTH: 2.6m(8’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
17.4/15.3
17.4/15.3
17.2/15.1
17.2/15.1
17.5/15.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
65
65
65
65
62
Vertical beam width, -3 dB (°)
7
7
7
7
6
Electrical down tilt (°)
0 - 10
Side lobe suppression, vertical 1st upper (dB)
>17
Isolation between inputs (dB)
30
Inter band Isolation (dB)
0 - 10
>17
>17
>17
>17
30
30
30
30
38
Tracking, horizontal plane ±60° (dB)
First null fill (dB)
38
<2.0
<2.0
<1.5
<1.5
<1.5
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>28
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
>27
>25
Cross polar discrimination (XPD) 0° (dB)
16
15
16
15
17
Cross polar discrimination (XPD) ±60° (dB)
>12
>9.5
>7.0
>7.5
>7.7
<0.44
<0.47
<0.52
<0.52
Far field coupling
<0.24
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 2x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2658x280x155mm(8’8”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
26.7(58.8)
Weight, without brackets, kg (lbs)
21.2(46.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph)
42(93)
Survival wind speed, m/s (mph)
55(123)
Lightning protection
DC Grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
2800x355x255(9’2”x1’2”x10”)
Radome colour
Light Gray
Shipping weight, kg (lbs)
32(70.5)
RET
AISG2.0 (AISG1.1/Ericsson) on WHITE system
Brackets
7256.00, 2210.10, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.0 / Dec 20 2009
Updated: 2009-07-30
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
446
POWERWAVE
Triple Broadband Antennas
8785.0ST.B400.04
i-RET ANTENNA TBB65 2.6m ALXT-824960/1710-2170-65-17.3i/18i/18i-Ai-D
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10°/0-10°/0-10°
LENGTH: 2.6m(8’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
2x1710-2170
Frequency band (MHz)
806-894
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
17.4/15.3
17.4/15.3
17.2/15.1
17.2/15.1
17.5/15.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
65
65
65
65
62
Vertical beam width, -3 dB (°)
7
7
7
7
6
Electrical down tilt (°)
0 - 10
Side lobe suppression, vertical 1st upper (dB)
>17
Isolation between inputs (dB)
30
Inter band Isolation (dB)
0 - 10
>17
>17
>17
>17
30
30
30
30
38
Tracking, horizontal plane ±60° (dB)
First null fill (dB)
38
<2.0
<2.0
<1.5
<1.5
<1.5
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>28
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
>27
>25
Cross polar discrimination (XPD) 0° (dB)
16
15
16
15
17
Cross polar discrimination (XPD) ±60° (dB)
>12
>9.5
>7.0
>7.5
>7.7
<0.44
<0.47
<0.52
<0.52
Far field coupling
<0.24
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
6x 7/16 DIN Female 4x AISG
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2658x280x155mm(8’8”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
27.2(59.9)
Weight, without brackets, kg (lbs)
21.7(47.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph)
42(93)
Survival wind speed, m/s (mph)
55(123)
Lightning protection
DC Grounded
Operating Temperature
Radome material
ASA
Package size, HxWxD, mm (ft)
2800x355x255(9’2”x1’2”x10”)
Radome colour
Light Gray
Shipping weight, kg (lbs)
32.5(71.7)
RET
AISG2.0 (AISG1.1/Ericsson) on RED & WHITE
system
7256.00, 2210.10, 7454.00A
Brackets
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.0 / Dec 20 2009
Updated: 2009-07-30
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
447
iRET Antennas
POWERWAVE
High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
iRET Antennas
Cross Polarized
High Broadband Cross Polarized Antennas, 1710-2170 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
65
15.6/13.5
0-16°
0.7m(2’3”)
8720.0ST.B400.00
449
65
18.3/16.2
0-10°
1.3m(4’3”)
8721.0ST.B400.00
450
65
19.5/17.4
0-6°
2.0m(6’6”)
8722.0ST.B400.00
451
448
POWERWAVE
High Broadband Antennas
8720.0ST.B400.00
i-RET ANTENNA HBB65 0.7m UXM-17102170-65-15i-Ai-D AISGv2.0
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15.6/13.5
TILT: 0-16°
LENGTH: 0.7m(2’3”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
15/12.9
15.1/13
15.6/13.5
Polarization
Dual Linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
65
64
14.1
13.5
12.5
>17,16,16,15,15@0,4,8,12,16
>17,16,16,15,15@0,4,8,12,16
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.5
<1.5
<1.5
>-29, typical >-25
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
0-16
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
>17,16,16,15,15@0,4,8,12,16
>-29, typical >-25
>-29, typical >-25
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
>25
Cross polar discrimination (XPD) 0° (dB)
>15
>15
>15
Cross polar discrimination (XPD) ±60° (dB)
>15
>15
>13
<-153
<-153
Far field coupling
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40]
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
709x167x89.5 (2’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
8.2 (18)
Weight, without brackets, kg (lbs)
4.5 (9.9)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
133 / 31 / 155
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
70 (156)
Lightning protection
DC Grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
880x200x200 (2’11”x8”x8”)
Shipping weight, kg (lbs)
11.5 (25.3)
RET
AISG2.0 (AISG1.1/Ericsson)
Brackets
7456.00A,2201.11,7454.00A,7455.00,7458.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.02 / Feb 19 2010
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-02
449
POWERWAVE
High Broadband Antennas
8721.0ST.B400.00
i-RET ANTENNA HBB65 1.3m UXM-17102170-65-18i-Ai-D AISGv2.0
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.3/16.2
TILT: 0-10°
LENGTH: 1.3m(4’3”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.6/15.5
18.0/15.9
18.3/16.2
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
64
Vertical beam width, -3 dB (°)
7.0
6.6
6.3
>18,18,16,16,14,12 @ 0,2,4,6,8,10
>18,18,16,16,14,12 @ 0,2,4,6,8,10
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-24 typical >-17
Electrical down tilt (°)
0-10
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
>18,18,16,16,14,12 @ 0,2,4,6,8,10
>-24 typical >-17
>-24 typical >-17
Vertical beam squint (°)
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>20
Cross polar discrimination (XPD) ±60° (dB)
>18
>14
>12
<-153
<-153
Far field coupling
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40]
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1309x167x89.5 mm (4’3”x6”x3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
11(24)
Weight, without brackets, kg (lbs)
7.3(16)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
285 / 60 / 333
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1480x200x200mm (4’10”x8”x8”)
Shipping weight, kg (lbs)
14.7 (32.4)
RET
AISG2.0 (AISG1.1/Ericsson)
Brackets
7456.00A,2201.11,7454.00A,7455.00,7458.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.03 / Feb 19 2010
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-02
450
POWERWAVE
High Broadband Antennas
8722.0ST.B400.00
i-RET ANTENNA HBB65 1.9m UXM-17102170-65-19.5i-Ai-D AISGv2.0
POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 19.5/17.4
TILT: 0-6°
LENGTH: 2.0m(6’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
19.0/16.9
19.2/17.1
19.5/17.4
Polarization
Dual Linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
66
65
Vertical beam width, -3 dB (°)
4.7
4.4
4.2
Electrical down tilt (°)
0-6
Side lobe suppression, vertical 1st upper (dB)
>18,18,18,16,16,14,14@0,1,2,3,4,5,6 >18,18,18,16,16,14,14@0,1,2,3,4,5,6 >18,18,18,16,16,14,14@0,1,2,3,4,5,6
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.0
>-20, typical >-16
First null fill (dB)
>-20, typical >-16
>-20, typical >-16
Vertical beam squint (°)
0.4
0.4
0.4
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>19
>19
>21
Cross polar discrimination (XPD) ±60° (dB)
>20
>17
>12
<-153
<-153
Far field coupling
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-160
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40]
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1934 x 167 x 89.5 (6’4” x 6” x 3”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
14 (31)
Weight, without brackets, kg (lbs)
8.5 (18.7)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
423 / 90 / 494
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC Grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
2105 x 200 x 200 (6’11” x 8” x 8”)
Shipping weight, kg (lbs)
15.5 (34.1)
RET
AISG2.0 (AISG1.1/Ericsson)
Brackets
7456.00A,2201.11,7454.00A,7455.00,7458.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.02 / Feb 19 2010
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-02
451
iRET Antennas
POWERWAVE
High Broadband Cross Polarized iRET 2300-2700MHz
iRET Antennas
Cross Polarized
High Broadband Cross Polarized iRET 2300-2700MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
65
18.0/15.9
0-10°
1.2m(48”)
P65-18-XW2-R
453
90
16.5/14.4
0-10°
1.2m(48”)
P90-17-XW2-R
454
452
POWERWAVE
P65-18-XW2-R
High Broadband Antennas
i-RET ANTENNA VHBB65 1.2m WXM-23002690-65-18i-Ai-D
POLARIZATION: X-Pol
FREQUENCY (MHz): 2300-2690**
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.0/15.9
TILT: 0-10°
LENGTH: 1.2m(48”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
2300-2690**
Frequency band (MHz)
2300-2690
Gain (dBi/dBd)
18.0/15.9
Polarization
Dual Linear ± 45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.5:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
5.5
Electrical down tilt (°)
0-10
Side lobe suppression, vertical 1st upper (dB)
<18,16,15 @ 0,5,10º
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
n.a.
Tracking, horizontal plane ±60° (dB)
<2.0
First null fill (dB)
>-24 Typical >-18
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>27
Front to back ratio (dB) 180°±30° total power
>25
Cross polar discrimination (XPD) 0° (dB)
>15
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
n.a.
IM3, 2xTx@43dBm (dBc)
<-153
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2x7/16 DIN Female 2xAISG [1x i-RET 8510.40]
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1219x167x89.5 (48”x6.5”x3.5”)
Mounting
Pre-mounted standard brackets [7456.00A]
Weight, with brackets, kg (lbs)
10.0 (21)
Weight, without brackets, kg (lbs)
6.0 (13)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
262 / 66 / 303
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC Grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1480x200x200 (58”x8”x8”)
Shipping weight, kg (lbs)
12.0 (27.0)
Brackets
7456.00A, 7455.00, 7458.00A,
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-11-29
453
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
P90-17-XW2-R
High Broadband Antennas
POLARIZATION: X-Pol
FREQUENCY (MHz): 2300-2690**
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 16.5 (14.4)
TILT: 0-10°
LENGTH: 1.2m (48”)
High Broadband Cross Polarized
ELECTRICAL SPECIFICATIONS*
2300-2690**
Frequency range (MHz)
Frequency band (MHz)
2300-2690
Gain (dBi/dBd)
16.5 (14.4)
Polarization
Dual Linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.4:1
Horizontal beam width, -3 dB (°)
90
Vertical beam width, -3 dB (°)
5.5
Electrical down tilt (°)
0-10
Side lobe suppression, vertical 1st upper (dB)
15
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
Tracking, horizontal plane ±60° (dB)
<1
First null fill (dB)
>-24 typical >-16
Vertical beam squint (°)
<1.0
Front to back ratio (dB) 180°±30° copolar
>30
Front to back ratio (dB) 180°±30° total power
>28
Cross polar discrimination (XPD) 0° (dB)
>15
Cross polar discrimination (XPD) ±60° (dB)
>7
Far field coupling
IM3, 2xTx@43dBm (dBc)
>-153
Power handling, average per input (W)
250
Power handling, average total (W)
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1219 x 167 x 100 (48” x 6” x 3.9”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
10 (21)
Weight, without brackets, kg (lbs)
6 (13)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
281
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC Ground
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1480 x 200 x 200 (58” x 8” x 8”)
Shipping weight, kg (lbs)
12 (27)
Brackets
7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-12-05
454
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
iRET Antennas
POWERWAVE
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
iRET Antennas
Cross Polarized
Dual High Broadband Cross Polarized Antennas, 1710-2170 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
65
18.1/16.0
0-10°
1.3m(4’3”)
8760.0ST.B100.00
456
65
18.1/16.0
0-10°
1.3m(4’3”)
8760.0ST.B400.00
457
455
POWERWAVE
Dual High Broadband Antennas
8760.0ST.B100.00
i-RET ANTENNA DHBB65 1.3m UXCM1710-2170-65-18i/18i-Ai-D AISGv1.1
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0
TILT: 0-10°
LENGTH: 1.3m(4’3”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.7/15.6
17.9/15.8
18.1/16.0
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
65
64
Vertical beam width, -3 dB (°)
7.1
6.8
6.2
>22,20,18,16,14,14@0,2,4,6,8, 10°
>22,20,18,16,14,14@0,2,4,6,8, 10°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
<2.0
Electrical down tilt (°)
0-10
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
>22,20,18,16,14,14@0,2,4,6,8, 10°
>-24,typical>-18
>-24,typical>-18
>-24,typical>-18
Vertical beam squint (°)
<2.0
<2.0
<2.0
Front to back ratio (dB) 180°±30° copolar
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>28
>28
>28
Cross polar discrimination (XPD) 0° (dB)
>16
>16
>20
Cross polar discrimination (XPD) ±60° (dB)
>16
>13
>10
IM3, 2xTx@43dBm (dBc)
<-153
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
<-160
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
1000
MECHANICAL SPECIFICATIONS*
Connector
4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40]
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x343x100 (4’4”x1’1”x3”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
19.5 (42.9)
Weight, without brackets, kg (lbs)
14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
529 / 63 / 615
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1430x400x200 (4’8”x1’3”x7”)
Shipping weight, kg (lbs)
23.5 (51.8)
RET
AISG1.1 (AISG2.0/Ericsson)
Brackets
7256.00, 7454.00A, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.02 / Feb 19 2010
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-09
456
POWERWAVE
Dual High Broadband Antennas
8760.0ST.B400.00
i-RET ANTENNA DHBB65 1.3m UXCM1710-2170-65-18i/18i-Ai-D AISGv2.0
POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0
TILT: 0-10°
LENGTH: 1.3m(4’3”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
1710-2170
Frequency band (MHz)
Gain (dBi/dBd)
1710-1880
1850-1990
1920-2170
17.7/15.6
17.9/15.8
18.1/16.0
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.4:1
Horizontal beam width, -3 dB (°)
67
65
64
Vertical beam width, -3 dB (°)
7.1
6.8
6.2
>22,20,18,16,14,14@0,2,4,6,8, 10°
>22,20,18,16,14,14@0,2,4,6,8, 10°
Isolation between inputs (dB)
>30
>30
>30
Tracking, horizontal plane ±60° (dB)
<2.0
<2.0
<2.0
Electrical down tilt (°)
0-10
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
>22,20,18,16,14,14@0,2,4,6,8, 10°
>-24,typical>-18
>-24,typical>-18
>-24,typical>-18
Vertical beam squint (°)
<2.0
<2.0
<2.0
Front to back ratio (dB) 180°±30° copolar
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>28
>28
>28
Cross polar discrimination (XPD) 0° (dB)
>16
>16
>20
Cross polar discrimination (XPD) ±60° (dB)
>16
>13
>10
IM3, 2xTx@43dBm (dBc)
<-153
<-153
<-153
IM7, 2xTx@43dBm (dBc)
<-160
<-160
<-160
Far field coupling
Power handling, average per input (W)
250
Power handling, average total (W)
1000
Daisy chain cable included
MECHANICAL SPECIFICATIONS*
Connector
4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40]
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x343x100 (4’4”x1’1”x3”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
19.5 (42.9)
Weight, without brackets, kg (lbs)
14 (30.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
529 / 63 / 615
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1430x400x200 (4’8”x1’3”x7”)
Shipping weight, kg (lbs)
23.5 (51.8)
RET
AISG2.0 (AISG1.1/Ericsson)
Brackets
7256.00, 7454.00A, 2210.10
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Rev1.02 / Feb 19 2010
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Updated: 2010-04-09
457
iRET Antennas
POWERWAVE
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700 MHz
iRET Antennas
Cross Polarized
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
65
18.0/15.9, 18.0/15.9
0-10°/0-10°
0.7m(2’3”)
P65-18-XHW2-RR
459
458
POWERWAVE
P65-18-XHW2-RR
Dual High Broadband Antennas
POLARIZATION: XX-Pol
FREQUENCY (MHz): 2500-2690, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.0/15.9, 18.0/15.9
TILT: 0-10°/0-10°
LENGTH: 1.3m (4’3”)
i-RET ANTENNA DBB65 1.3m 17102170/2500-2690-65-18i/18i-D
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
2500-2690
Frequency band (MHz)
2500-2690
1710-1880
1850-1990
1900-2170
18.0/15.9
17.6/15.5
17.8/15.7
18.0/15.9
Gain (dBi/dBd)
Polarization
1710-2170
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.4:1
<1.4:1
Horizontal beam width, -3 dB (°)
65
65
65
65
Vertical beam width, -3 dB (°)
5.7
7.0
6.6
6.3
Electrical down tilt (°)
0 - 10
Side lobe suppression, vertical 1st upper (dB)
0 - 10
>20,18,15 @ 0,5,10°
>20,20,20,20,18,18 @ >20,20,20,20,18,18 @ >20,20,20,20,18,18 @
0,2,4,6,8,10°
0,2,4,6,8,10°
0,2,4,6,8,10°
>30
>30
>30
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
>35
Tracking, horizontal plane ±60° (dB)
<2
<2
<2
<2
>-24 typical >-17
>-20 typical >-17
>-20 typical >-17
>-20 typical >-17
First null fill (dB)
>35
Vertical beam squint (°)
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>27
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>26
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>15
>17
>17
>17
Cross polar discrimination (XPD) ±60° (dB)
>10
>18
>14
>10
-
-
-
-
Far field coupling
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
-
<-160
Power handling, average per input (W)
250
250
Power handling, average total (W)
500
500
MECHANICAL SPECIFICATIONS*
Connector
4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40]
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1320x343x100 (52”x13.5”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
19.5 (42.9)
Weight, without brackets, kg (lbs)
14.0 (30.8)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
529/63/615
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Package size, HxWxD, mm (ft)
1430x400x200 (56”x16”x8”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
23.5 (51.8)
RET
2xiRET 8510.40 AISGv2.0/3GPP
Brackets
7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visithttp://www.powerwave.com/rpa/.
Updated: 2010-12-15
459
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
iRET Antennas
POWERWAVE
Dual High Broadband Cross Polarized iRET 2300-2700MHz
iRET Antennas
Cross Polarized
Dual High Broadband Cross Polarized iRET 2300-2700MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
65
18.0/15.9
0-10°
1.2m(48”)
P65-18-XXW2-R
461
90
16.1
0-10°
1.2m(48”)
P90-17-XXW2-R
462
460
POWERWAVE
P65-18-XXW2-R
Dual High Broadband Antennas
i-RET ANTENNA DVHBB65 1.2m WXCM2300-2690-65-18i/18i-Ai-D
POLARIZATION: XX-Pol
FREQUENCY (MHz): 2300-2690**
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 18.0/15.9
TILT: 0-10°
LENGTH: 1.2m(48”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
2300-2690**
Frequency band (MHz)
2300-2690
Gain (dBi/dBd)
18.0/15.9
Polarization
2 x Dual Linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.5:1
Horizontal beam width, -3 dB (°)
65
Vertical beam width, -3 dB (°)
5.5
Electrical down tilt (°)
0-10
Side lobe suppression, vertical 1st upper (dB)
<18,16,15 @ 0,5,10º
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
n.a.
Tracking, horizontal plane ±60° (dB)
<2.0
First null fill (dB)
>-24, typical >-18
Vertical beam squint (°)
0.5
Front to back ratio (dB) 180°±30° copolar
>27
Front to back ratio (dB) 180°±30° total power
>25
Cross polar discrimination (XPD) 0° (dB)
>15
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
n.a.
IM3, 2xTx@43dBm (dBc)
<-153
Power handling, average per input (W)
250
Power handling, average total (W)
1000
MECHANICAL SPECIFICATIONS*
Connector
4x7/16 DIN Female 2xAISG [1x i-RET 8510.40]
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1209x343x89 (4’x1’1”x3”)
Mounting
Pre-mounted heavy duty brackets [7456.00]
Weight, with brackets, kg (lbs)
17.0 (38.0)
Weight, without brackets, kg (lbs)
12.0 (26.0)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
476 / 58 / 538
Maximum operational wind speed, m/s (mph)
42(93)
Survival wind speed, m/s (mph)
70(156)
Lightning protection
DC Grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1430x400x200 (56”x16”x8”)
Shipping weight, kg (lbs)
20.6(45)
Brackets
7256.00, 7454.00A, 7458.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-12-05
461
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
P90-17-XXW2-R
Dual High Broadband Antennas
Dual High Broadband Cross Polarized
POLARIZATION: XXPol
FREQUENCY (MHz): 2496-2690
HORIZONTAL BEAM WIDTH (°): 90
GAIN (dBi/dBd): 16.1 (Average)
TILT: 0-10°
LENGTH: 1.2M (48”)
ELECTRICAL SPECIFICATIONS*
2496-2690
Frequency range (MHz)
Frequency band (MHz)
2496-2690
Gain (dBi/dBd)
16.1 (Average)
Polarization
2 x Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.5:1
Horizontal beam width, -3 dB (°)
90 +/- 6°
Vertical beam width, -3 dB (°)
5.5
Electrical down tilt (°)
0-10
Side lobe suppression, vertical 1st upper (dB)
12 @ 0°, 17 @ 5°, 15 @ 10°
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
N/A
Tracking, horizontal plane ±60° (dB)
<3.0
First null fill (dB)
>-24,typical>-18
Vertical beam squint (°)
<1.0 +/- .5°
Front to back ratio (dB) 180°±30° copolar
>30 @ 180°
Front to back ratio (dB) 180°±30° total power
>25 @ +/-30° cone
Cross polar discrimination (XPD) 0° (dB)
>15
Cross polar discrimination (XPD) ±60° (dB)
>10
Far field coupling
N/A
IM3, 2xTx@43dBm (dBc)
<-153
Power handling, average per input (W)
250
Power handling, average total (W)
1000
MECHANICAL SPECIFICATIONS*
Connector
4 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1219 x 343 x 100 (48” x 13.5” x 3.9”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
19.5 (44)
Weight, without brackets, kg (lbs)
14.2 (32)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
520
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC Grounded
Operating Temperature
-30 to +70C
Radome material
ASA
Radome colour
Light Grey
Package size, HxWxD, mm (ft)
1430 x 400 x 200 (4’8” x 1’3” x 8”)
Shipping weight, kg (lbs)
20 (45)
Brackets
7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data. **VSWR at 2300MHz is 1.55:1.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-11-24
462
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Power wave
iDiplexer Antennas
iDiplexer antennas combine the performance of
Powerwave’s high performing multiband antenna line
and external diplexer into one product. iDiplexed
antennas offer a reduced amount of connectors and
feeder lines to customers who are limited in adding
additional feeders due to windload and space limitation
on towers. Customers can rapidly deploy an additional
overlay network by just exchanging the existing antennas
with iDiplexed antennas and reusing the existing feeders.
iDiplexed antennas usually combine the low band and
high band frequencies into a single pair of connectors,
still keeping the independent variable downtilt capability.
iDiplexer Antennas
POWERWAVE
iDiplexer Antennas
iDiplexer Antennas
Cross Polarized
Multi Broadband Cross Polarized Antennas
Horizontal
Beamwidth
65
65
65
Gain dBi dBd
17.4/15.3, 17.6/15.5,
17.4/15.3
16.0/13.9, 15.9/13.8,
15.8/13.7
14.5/12.4, 14.6/12.5,
14.4/12.3
65
17.3/15.2, 17.8/15.7
65
16.7/14.6, 17.4/15.3
65
15/12.9, 18/15.9
Tilt
Length
Part Number
2-8°/2-10°/2-10°
2.6m (8’6”)
P65-18-XDHW2-ND1
465
2-10°/2-12°/2-12°
2.0m (6’6”)
P65-17-XDHW2-ND1
466
2-12°/2-14°/2-14°
1.4m (4’7”)
P65-15-XDHW2-ND1
467
7755.OST.0002.00
468
7752.OST.0002.00
469
7750.OST.0002.00
470
MET (with Integrated
2.6m (8’6”)
Diplexer)
MET (with Integrated
2.0m (6’6”)
Diplexer)
MET (with Integrated
1.4m (4’7”)
Diplexer)
464
Page
POWERWAVE
P65-18-XDHW2ND1
iDiplexer Antennas
Triple Broadband Cross Polarized 790960MHz,1710-2170MHz, 2500-2690MHz
integrated diplexer LB/HB
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 790-960, 1710-2170, 2500
-2690
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.4/15.3, 17.6/15.5, 17.4/15.3
TILT: 2-8°/2-10°/2-10°
LENGTH: 2.6m(8’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
790-960
1710-2170; 2500-2690
Frequency band (MHz)
790-894
880-960
1710-1880
1900-2170
2500-2690
Gain (dBi/dBd)
16.2/14.1
17.4/15.3
17.2/15.1
17.6/15.5
17.4/15.3
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
<1.5:1
<1.5:1
Horizontal beam width, -3 dB (°)
72
67
63
60
62
Vertical beam width, -3 dB (°)
7.5
6.9
6.9
6.2
5.0
>15
>15
>15
>15
>30
>30
>30
>30
Electrical down tilt (°)
2-8
Side lobe suppression, vertical 1st upper (dB)
>15
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
>30
Tracking, horizontal plane ±60° (dB)
First null fill (dB)
2 - 10
>30
<2.0
<2.0
<1.5
<1.5
<1.5
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
Vertical beam squint (°)
0.8
0.8
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>28
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>27
>27
>27
>27
>27
Cross polar discrimination (XPD) 0° (dB)
>13
>13
>13
>13
>13
Cross polar discrimination (XPD) ±60° (dB)
-
-
-
-
-
Far field coupling
-
-
-
-
-
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
-
<-160
Power handling, average per input (W)
200
200
Power handling, average total (W)
400
400
MECHANICAL SPECIFICATIONS*
Connector
4x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2705x282x155mm(8’10”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
28(61.6)
Weight, without brackets, kg (lbs)
22.5(49.5)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph)
42(93)
Survival wind speed, m/s (mph)
55(123)
Lightning protection
DC Grounded
Operating Temperature
-40°C to +60°C
Radome material
ASA
Package size, HxWxD, mm (ft)
2847x355x255(9’4”x1’2”x10”)
Radome colour
Light Gray
Shipping weight, kg (lbs)
33.3(73.3)
RET
8210.40, 8210.10, 8230.40, 8230.10
Brackets
7256.00, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-12-09
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
465
POWERWAVE
P65-17-XDHW2ND1
iDiplexer Antennas
Triple Broadband Cross Polarized 790960MHz, 1710-2170MHz, 2500-2690MHz
integrated diplexer LB/HB
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 790-960, 1710-2170, 2500
-2690
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.0/13.9, 15.9/13.8, 15.8/13.7
TILT: 2-10°/2-12°/2-12°
LENGTH: 2.0m(6’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
790-960
1710-2170; 2500-2690
Frequency band (MHz)
790-894
880-960
1710-1880
1900-2170
2500-2690
Gain (dBi/dBd)
15.6/13.5
16.0/13.9
15.8/13.7
15.9/13.8
15.8/13.7
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
50
50
<1.5:1
<1.5:1
78
67
66
63
66
11.0
8.6
10.0
8.7
7.9
>15
>15
>15
>15
>30
>30
>30
>30
Electrical down tilt (°)
2 - 10
Side lobe suppression, vertical 1st upper (dB)
>15
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
2 - 12
>30
Tracking, horizontal plane ±60° (dB)
First null fill (dB)
Dual linear ±45°
>30
<1.0
<1
<1.5
<2
<4
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>28
>30
>27
>27
>27
Front to back ratio (dB) 180°±30° total power
>26
>26
>25
>25
>25
Cross polar discrimination (XPD) 0° (dB)
>13
>13
>13
>13
>13
Cross polar discrimination (XPD) ±60° (dB)
-
-
-
-
-
Far field coupling
-
-
-
-
-
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-153
<-153
-
<-160
Power handling, average per input (W)
200
200
Power handling, average total (W)
400
400
MECHANICAL SPECIFICATIONS*
Connector
4x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2033x280x155mm (6’8”x11”x6”)
Mounting
Pre-mounted standard brackets
Weight, with brackets, kg (lbs)
21.9 (48.2)
Weight, without brackets, kg (lbs)
16.4 (36.1)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Package size, HxWxD, mm (ft)
2175x355x255 (7’2”x14”x10”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
26.5 (58.4)
RET
8210.40, 8210.10, 8230.40, 8230.10
Brackets
7256.00,7454.00A,2210.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-12-09
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
466
POWERWAVE
P65-15-XDHW2ND1
iDiplexer Antennas
Triple Broadband Cross Polarized 790960MHz,1710-2170MHz, 2500-2690MHz
integrated diplexer LB/HB
POLARIZATION: XXX-Pol
FREQUENCY (MHz): 790-960, 1710-2170, 2500
-2690
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 14.5/12.4, 14.6/12.5, 14.4/12.3
TILT: 2-12°/2-14°/2-14°
LENGTH: 1.4m(4’7”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
790-960
1710-2170; 2500-2690
Frequency band (MHz)
790-894
880-960
1710-1880
1900-2170
2500-2690
Gain (dBi/dBd)
13.2/11.1
14.5/12.4
14.2/12.1
14.6/12.5
14.4/12.3
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
Vertical beam width, -3 dB (°)
50
50
<1.5:1
<1.5:1
78
67
66
63
66
18.0
13.9
13.8
12.4
11.0
>15
>15
>15
>15
>30
>30
>30
>30
Electrical down tilt (°)
2 - 12
Side lobe suppression, vertical 1st upper (dB)
>15
Isolation between inputs (dB)
>30
Inter band Isolation (dB)
2 - 14
>30
Tracking, horizontal plane ±60° (dB)
First null fill (dB)
Dual linear ±45°
>30
<1
<2
<1.5
<1.2
<4
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
>-24 typical >-17
Vertical beam squint (°)
0.7
0.7
0.7
1
1
Front to back ratio (dB) 180°±30° copolar
>27
>28
>28
>28
>28
Front to back ratio (dB) 180°±30° total power
>24
>24
>24
>24
>24
Cross polar discrimination (XPD) 0° (dB)
>13
>13
>13
>13
>13
Cross polar discrimination (XPD) ±60° (dB)
-
-
-
-
-
Far field coupling
-
-
-
-
-
IM3, 2xTx@43dBm (dBc)
IM7, 2xTx@43dBm (dBc)
<-153
<-153
-
<-160
Power handling, average per input (W)
200
200
Power handling, average total (W)
400
400
MECHANICAL SPECIFICATIONS*
Connector
4x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1408x280x155mm (4’7”x11”x6”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
19 (42)
Weight, without brackets, kg (lbs)
13.5 (30)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
415
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
PVC
Package size, HxWxD, mm (ft)
1550x355x200 (5’1”x1’2”x7”)
Radome colour
Light Grey
Shipping weight, kg (lbs)
23 (50.7)
RET
8210.40, 8210.10, 8230.40, 8230.10
Brackets
7256.00, 2210.10, 7454.00A
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-12-09
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
467
POWERWAVE
7755.0ST.0002.00
iDiplexer Antennas
Dual Broadband Cross Polarized With
Integrated Diplexer
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 17.3/15.2, 17.8/15.7
TILT: MET (with Integrated Diplexer)
LENGTH: 2.6m (8’6”)
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
1710-2170
Frequency band (MHz)
824-896
880-960
1710-1880
1850-1990
1900-2170
Gain (dBi/dBd)
16.6/14.5
17.3/15.2
17.3/15.2
17.6/15.5
17.8/15.7
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
1.5:1
1:5:1
Horizontal beam width, -3 dB (°)
71
67
65
65
62
Vertical beam width, -3 dB (°)
7.4
7.0
6.9
6.4
6.1
>18,18,17,16,16@
>18,18,17,16,16@
>17,16,15,14,13@
>17,17,16,15,14@
>17,17,16,15,14@
2,4,6,8°
2,4,6,8°
2,4,6,8°
2,4,6,8°
2,4,6,8°
30
30
30
30
30
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
2 to 8
Isolation between inputs (dB)
Inter band Isolation (dB)
0 to 8
38
-
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.5
<1
<3.5
First null fill (dB)
>-25
>-25
>-25
>-25
>-25
Vertical beam squint (°)
0.5
0.5
0.5
0.5
0.5
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
>25
>25
>25
Cross polar discrimination (XPD) 0° (dB)
16
14
16
16
16
Cross polar discrimination (XPD) ±60° (dB)
>11
> 9.5
> 6.3
>7.2
>7.5
Far field coupling
<0.3
<0.41
<0.53
<0.58
<0.58
IM3, 2xTx@43dBm (dBc)
<-150
<-150
IM7, 2xTx@43dBm (dBc)
-
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2658x280x125mm (8’8”x11”x4”)
Mounting
Pre-mounted heavy duty brackets
Weight, with brackets, kg (lbs)
25.1 (55)
Weight, without brackets, kg (lbs)
19.6 (43)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
880
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
GRP
Packet size, HxWxD, mm (ft)
Light Grey
Radome colour
2800x355x255 (9’2”x1’2”x10”)
Shipping weight, kg (lbs)
32.5 (71.6)
RET
8210.40, 8210.10, 8220.40, 8220.10
Brackets
7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-12-02
468
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
7752.0ST.0002.00
iDiplexer Antennas
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 16.7/14.6, 17.4/15.3
TILT: MET (with Integrated Diplexer)
LENGTH: 2.0m (6’6”)
Dual Broadband Cross Polarized With
Integrated Diplexer
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
1710-2170
Frequency band (MHz)
824-896
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
15.7/14.0
16.6/14.5
17.0/14.9
17.2/15.1
17.5/15.4
Polarization
Dual linear ±45°
1RPLQDO,PSHGDQFH ȍ
VSWR
Dual linear ±45°
50
50
1.5:1
1.5:1
Horizontal beam width, -3 dB (°)
71
67
63
63
60
Vertical beam width, -3 dB (°)
9.6
8.9
7
7
6.2
>17,16,15,14 @
>17,16,15,14 @
>18,17,15,14 @
>18,17,15,14 @ 0,2,4,8
>18,17,15,14 @ 0,2,4,8
2,4,6,8º
2,4,6,8º
0,2,4,8º
0,2,4,8º
0,2,4,8º
>30
>30
>30
>30
>30
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
2-9
Isolation between inputs (dB)
Inter band Isolation (dB)
0-8
-
-
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.5
<1.5
<1.5
First null fill (dB)
>-25
>-25
>-25
>-25
>-25
Vertical beam squint (°)
<1
<1
<1
<1
<1
Front to back ratio (dB) 180°±30° copolar
>30
>30
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>25
>25
>25
>25
>25
Cross polar discrimination (XPD) 0° (dB)
>16
>15
>16
>16
>16
Cross polar discrimination (XPD) ±60° (dB)
> 12
> 9.5
> 6.2
>6.5
> 7.5
Far field coupling
<0.26
<0.39
<0.5
<0.59
<0.59
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
-
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
2033x280x125mm (6’8”x11”x4”)
Mounting
Pre-mounted heavy duty bracket
Weight, with brackets, kg (lbs)
19.8 (44)
Weight, without brackets, kg (lbs)
16.0 (35)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
653
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
70 (156)
Lightning protection
DC grounded
Operating Temperature
-40°C to +60°C
Radome material
GRP
Package size, HxWxD, mm (ft)
2175x355x255 (7’2”x14”x10”)
Radome colour
Grey (RAL 7035 on all visible plastic parts)
Shipping weight, kg (lbs)
27 (59.5)
RET
8210.40, 8210.10, 8220.40, 8220.10
Brackets
7256.00, 7454.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-12-02
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
469
POWERWAVE
7750.0ST.0002.00
iDiplexer Antennas
Dual Broadband Cross Polarized With
Integrated Diplexer
POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (°): 65
GAIN (dBi/dBd): 15/12.9, 18/15.9
TILT: MET (with Integrated Diplexer)
LENGTH: 1.4M
ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)
824-960
1710-2170
Frequency band (MHz)
824-880
880-960
1710-1880
1850-1990
1920-2170
Gain (dBi/dBd)
15/12.9
15/12.9
17.3/15.2
17.3/15.2
18/15.9
Polarization
Dual linear ± 45º
1RPLQDO,PSHGDQFH ȍ
VSWR
Horizontal beam width, -3 dB (°)
50
50
>1.5:1
>1.5:1
68 ± 3º
68 ± 3º
67 ± 2º
67 ± 2º
62 ± 4º
14
14
7
7
6.2
Vertical beam width, -3 dB (°)
Electrical down tilt (°)
Side lobe suppression, vertical 1st upper (dB)
Dual linear ± 45º
2 - 12
0-8
>21,20,17,16 @
>21,20,17,16 @
>18,17,15,14 @
>18,17,15,14 @
>18,17,15,14 @
2,4,8,12º
2,4,8,12º
0,2,4,8º
0,2,4,8º
0,2,4,8º
>30
>30
>30
>30
>30
Isolation between inputs (dB)
Inter band Isolation (dB)
40
Tracking, horizontal plane ±60° (dB)
<1.0
<1.0
<1.5
<1.5
<1.5
First null fill (dB)
>20
>20
>20
>20
>20
Vertical beam squint (°)
<1
<1
<1
<1
<1
Front to back ratio (dB) 180°±30° copolar
>26
>26
>30
>30
>30
Front to back ratio (dB) 180°±30° total power
>26
>26
>25
>25
>25
Cross polar discrimination (XPD) 0° (dB)
>17
>17
>18
>18
>18
Cross polar discrimination (XPD) ±60° (dB)
>11
>11
>10
>10
>10
-
-
-
-
-
Far field coupling
IM3, 2xTx@43dBm (dBc)
<-153
<-153
IM7, 2xTx@43dBm (dBc)
NA
<-160
Power handling, average per input (W)
300
250
Power handling, average total (W)
600
500
MECHANICAL SPECIFICATIONS*
Connector
2 x 7/16 DIN Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
1408x280x125mm (4’9”x11”x5”)
Mounting
Pre Mounted Standard Brackets
Weight, with brackets, kg (lbs)
18 (39.6)
Weight, without brackets, kg (lbs)
14.3 (31.5)
Wind load, frontal/lateral/rear side 42 m/s Cd=1.6 (N)
435
Maximum operational wind speed, m/s (mph)
42 (93)
Survival wind speed, m/s (mph)
55 (123)
Lightning protection
DC Grounded
Operating Temperature
-40°C to +60°C
Radome material
GRP
Package size, HxWxD, mm (ft)
1550x355x255mm (61”x14”x10”)
Radome colour
Grey (RAL 7035 on all visible plastic parts)
Shipping weight, kg (lbs)
23 (50.6)
RET
8210.40, 8210.10, 8220.40, 8220.10
Brackets
7456.00A, 7454.00, 7455.00, 7458.00
*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
Updated: 2010-12-02
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
470
Power wave
Remote Electrical Tilt (RET)
The Powerwave RET system is designed to meet the
high requirements for reliability, flexibility and efficiency
in remote control of tower-mounted telecommunication
equipment. The system consists of a master control unit
(MCU) that controls the antenna line devices (ALDs) and
supplies DC power to them via a common bus. ALDs are
connected to the MCU using a separate ALD system cable
or by using the existing RF feeders in your system.
Remote Electrical Tilt
POWERWAVE
Remote Electrical Tilt (RET)
RET
Page
Single Band RET
473
Dual Band RET
482
Triple Band RET
485
iRET Antenna Controller Module
Page
iRET 8510
488
Master Control Units
Page
MCU
491
Current Injector Layer One Converter
Page
CILOC
498
RET System Cables
Page
RET System Cables
505
472
Remote Electrical Tilt
POWERWAVE
Single Band RET
Remote Electrical Tilt
Single Band RET
Start-up
Power Supply Surge
Current
Consumption(idle)
Part Number
Page
+10 to +30 V
<1mC
19V
8110.40
474
AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)
+10 to +30 V
<1mC
19V
8210.40
475
AISG1.1 (AISG
V2.0/3GPP, Ericsson
configurable)
+10 to +30 V
<1mC
19V
8110.10
476
AISG V1.1 (V2.0/3GPP,
Ericsson configurable)
+10 to +30 V
<1mC
19V
8212.10
477
AISG V1.1 (V2.0/3GPP,
Ericsson configurable)
+10 to +30 V
<1mC
19V
8212.40
478
AISG V1.1 (V2.0/3GPP,
Ericsson configurable)
+10 to +30 V
<1mC
19V
8211.10
479
AISG V1.1 (V2.0/3GPP,
Ericsson configurable)
+10 to +30 V
<1mC
19V
8211.40
480
AISG V1.1 (V2.0/3GPP,
Ericsson configurable)
+10 to +30 V
<1mC
19V
8212.10
481
Standard
AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)
473
POWERWAVE
Remote Electrical Tilt
8110.40
Single Band RET
ELECTRICAL SPECIFICATIONS*
Product Number
8110.40
Standard
AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)
Power supply
+10 to +30 V
Start up surge
<1mC
Current Consumption during tilting
<400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle
<100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate
9.6 kbps
Rod positioning accuracy
< +/- 0.8mm
Operating Temperature
-40 to +65C
Type Approvals
Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF
>500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight
1 kg
Dimensions (W,L,H) (mm)
62 x 78 x 216
Connector Protection Ground
M6 screw
Connector AISG
IEC 60130-9 (Ed 3.0)
Ingress protection
IP65
Environmental
ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for
complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet
the high requirements for reliability, flexibility
and efficiency in remote control of towermounted telecommunication equipment.
This system consists of a Master Control Unit
(MCU) that controls the Antenna Line Devices
(ALDs) and supplies DC power to them via a
common bus, ALDs are connected to the MCU
using a separate ALD system cable or by using
the existing RF feeders in your system.
Rev1.0 / Oct 27 2009
Updated: 2010-05-10
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
474
POWERWAVE
8210.40
Remote Electrical Tilt
Single Band RET for Multiband Antennas (Controlling white antenna array)
ELECTRICAL SPECIFICATIONS*
Product Number
8210.40
Standard
AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)
Power supply
+10 to +30 V
Start up surge
<1mC
Current Consumption during tilting
<400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle
<100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate
9.6 kbps
Rod positioning accuracy
< +/- 0.8mm
Operating Temperature
-40 to +65C
Type Approvals
Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF
>500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight
1 kg
Dimensions (W,L,H) (mm)
125 x 213 x 62 (excluding mounting screws)
Connector Protection Ground
M6 screw
Connector AISG
IEC 60130-9 (Ed 3.0)
Ingress protection
IP65
Environmental
ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for
complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet
the high requirements for reliability, flexibility
and efficiency in remote control of towermounted telecommunication equipment.
This system consists of a Master Control Unit
(MCU) that controls the Antenna Line Devices
(ALDs) and supplies DC power to them via a
common bus, ALDs are connected to the MCU
using a separate ALD system cable or by using
the existing RF feeders in your system.
Updated: 2010-05-10
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
475
POWERWAVE
Remote Electrical Tilt
8110.10
Single Band RET
ELECTRICAL SPECIFICATIONS*
Product Number
8110.10
Standard
AISG1.1 (AISG V2.0/3GPP , Ericsson configurable)
Power supply
+10 to +30 V
Start up surge
<1mC
Current Consumption during tilting
<400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle
<100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate
9.6 kbps
Rod positioning accuracy
< +/- 0.8mm
Operating Temperature
-40 to +65C
Type Approvals
Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF
>500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight
1 kg
Dimensions (W,L,H) (mm)
62 x 78 x 216
Connector Protection Ground
M6 screw
Connector AISG
IEC 60130-9 (Ed 3.0)
Ingress protection
IP65
Environmental
ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for
complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet
the high requirements for reliability, flexibility
and efficiency in remote control of towermounted telecommunication equipment.
This system consists of a Master Control Unit
(MCU) that controls the Antenna Line Devices
(ALDs) and supplies DC power to them via a
common bus, ALDs are connected to the MCU
using a separate ALD system cable or by using
the existing RF feeders in your system.
Rev1.0 / Oct 27 2009
Updated: 2010-05-10
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
476
POWERWAVE
8212.10
Remote Electrical Tilt
Single Band RET for Multiband Antennas (Controlling blue antenna array)
ELECTRICAL SPECIFICATIONS*
Product Number
8212.10
Standard
AISG V1.1 (V2.0/3GPP, Ericsson configurable)
Power supply
+10 to +30 V
Start up surge
<1mC
Current Consumption during tilting
<400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle
<100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate
9.6 kbps
Rod positioning accuracy
< +/- 0.8mm
Operating Temperature
-40 to +65C
Type Approvals
Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF
>500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight
1 kg
Dimensions (W,L,H) (mm)
125 x 213 x 62 (excluding mounting screws)
Connector Protection Ground
M6 screw
Connector AISG
IEC 60130-9 (Ed 3.0)
Ingress protection
IP65
Environmental
ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for
complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet
the high requirements for reliability, flexibility
and efficiency in remote control of towermounted telecommunication equipment.
This system consists of a Master Control Unit
(MCU) that controls the Antenna Line Devices
(ALDs) and supplies DC power to them via a
common bus, ALDs are connected to the MCU
using a separate ALD system cable or by using
the existing RF feeders in your s
Updated: 2010-05-10
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
477
POWERWAVE
8212.40
Remote Electrical Tilt
Single Band RET for Multiband Antennas (Controlling blue antenna array)
ELECTRICAL SPECIFICATIONS*
Product Number
8212.40
Standard
AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)
Power supply
+10 to +30 V
Start up surge
<1mC
Current Consumption during tilting
<400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle
<100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate
9.6 kbps
Rod positioning accuracy
< +/- 0.8mm
Operating Temperature
-40 to +65C
Type Approvals
Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF
>500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight
1 kg
Dimensions (W,L,H) (mm)
125 x 213 x 62 (excluding mounting screws)
Connector Protection Ground
M6 screw
Connector AISG
IEC 60130-9 (Ed 3.0)
Ingress protection
IP65
Environmental
ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for
complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet
the high requirements for reliability, flexibility
and efficiency in remote control of towermounted telecommunication equipment.
This system consists of a Master Control Unit
(MCU) that controls the Antenna Line Devices
(ALDs) and supplies DC power to them via a
common bus, ALDs are connected to the MCU
using a separate ALD system cable or by using
the existing RF feeders in your system.
Updated: 2010-05-10
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
478
POWERWAVE
8211.10
Remote Electrical Tilt
Single Band RET for Multiband Antennas (Controlling red antenna array)
ELECTRICAL SPECIFICATIONS*
Product Number
8211.10
Standard
AISG V1.1 (V2.0/3GPP, Ericsson configurable)
Power supply
+10 to +30 V
Start up surge
<1mC
Current Consumption during tilting
<400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle
<100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate
9.6 kbps
Rod positioning accuracy
< +/- 0.8mm
Operating Temperature
-40 to +65C
Type Approvals
Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF
>500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight
1 kg
Dimensions (W,L,H) (mm)
125 x 213 x 62 (excluding mounting screws)
Connector Protection Ground
M6 screw
Connector AISG
IEC 60130-9 (Ed 3.0)
Ingress protection
IP65
Environmental
ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for
complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet
the high requirements for reliability, flexibility
and efficiency in remote control of towermounted telecommunication equipment.
This system consists of a Master Control Unit
(MCU) that controls the Antenna Line Devices
(ALDs) and supplies DC power to them via a
common bus, ALDs are connected to the MCU
using a separate ALD system cable or by using
the existing RF feeders in your s
Updated: 2010-05-10
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
479
POWERWAVE
8211.40
Remote Electrical Tilt
Single Band RET for Multiband Antennas (Controlling red antenna array)
ELECTRICAL SPECIFICATIONS*
Product Number
8211.40
Standard
AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)
Power supply
+10 to +30 V
Start up surge
<1mC
Current Consumption during tilting
<400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle
<100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate
9.6 kbps
Rod positioning accuracy
< +/- 0.8mm
Operating Temperature
-40 to +65C
Type Approvals
Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF
>500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight
1 kg
Dimensions (W,L,H) (mm)
125 x 213 x 62 (excluding mounting screws)
Connector Protection Ground
M6 screw
Connector AISG
IEC 60130-9 (Ed 3.0)
Ingress protection
IP65
Environmental
ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for
complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet
the high requirements for reliability, flexibility
and efficiency in remote control of towermounted telecommunication equipment.
This system consists of a Master Control Unit
(MCU) that controls the Antenna Line Devices
(ALDs) and supplies DC power to them via a
common bus, ALDs are connected to the MCU
using a separate ALD system cable or by using
the existing RF feeders in your system.
Updated: 2010-05-10
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
480
POWERWAVE
8212.10
Remote Electrical Tilt
Single Band RET for Multiband Antennas (Controlling blue antenna array)
ELECTRICAL SPECIFICATIONS*
Product Number
8212.10
Standard
AISG V1.1 (V2.0/3GPP, Ericsson configurable)
Power supply
+10 to +30 V
Start up surge
<1mC
Current Consumption during tilting
<400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle
<100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate
9.6 kbps
Rod positioning accuracy
< +/- 0.8mm
Operating Temperature
-40 to +65C
Type Approvals
Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF
>500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight
1 kg
Dimensions (W,L,H) (mm)
125 x 213 x 62 (excluding mounting screws)
Connector Protection Ground
M6 screw
Connector AISG
IEC 60130-9 (Ed 3.0)
Ingress protection
IP65
Environmental
ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for
complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet
the high requirements for reliability, flexibility
and efficiency in remote control of towermounted telecommunication equipment.
This system consists of a Master Control Unit
(MCU) that controls the Antenna Line Devices
(ALDs) and supplies DC power to them via a
common bus, ALDs are connected to the MCU
using a separate ALD system cable or by using
the existing RF feeders in your s
Updated: 2010-05-10
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
481
Remote Electrical Tilt
POWERWAVE
Dual Band RET
Remote Electrical Tilt
Dual Band RET
Standard
AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)
AISG v1.1
Start-up
Power Supply Surge
Current
Consumption(idle)
Part Number
Page
+10 to +30 V
<1mC
19V
8220.40
483
+10 to +30 V
<1mC
19V
8220.10
484
482
POWERWAVE
8220.40
Remote Electrical Tilt
Dual Band RET
ELECTRICAL SPECIFICATIONS*
Product Number
8220.40
Standard
AISG V2.0/3GPP (AISG1.1)
Power supply
+10 to +30 V
Start up surge
<1mC
Current Consumption during tilting
<400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle
<100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate
9.6 kbps
Rod positioning accuracy
< +/- 0.8mm
Operating Temperature
-40 to +65° C
Type Approvals
Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF
>500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight
1 kg
Dimensions (W,L,H) (mm)
125 x 213 x 62 (excluding mounting screws)
Connector Protection Ground
M6 screw
Connector AISG
IEC 60130-9 (Ed 3.0)
Ingress protection
IP65
Environmental
ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for
complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet
the high requirements for reliability, flexibility
and efficiency in remote control of towermounted telecommunication equipment.
This system consists of a Master Control Unit
(MCU) that controls the Antenna Line Devices
(ALDs) and supplies DC power to them via a
common bus, ALDs are connected to the MCU
using a separate ALD system cable or by using
the existing RF feeders in your system.
Updated: 2010-08-19
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
483
POWERWAVE
8220.10
Remote Electrical Tilt
DualBand RET
ELECTRICAL SPECIFICATIONS*
Product Number
8220.10
Standard
AISG v1.1 (AISG V2.0/3GPP)
Power supply
+10 to +30 V
Start up surge
<1mC
Current Consumption during tilting
<400mA at Vin ,19V, <250mA at Vin>19V
Current Consumption idle
<100mA at Vin <19V, <50mA at Vin>19V
AISG Data Rate
9.6kbps
Rod positioning accuracy
<±0.8mm
Operating Temperature
-40 to +65°C
Type Approvals
Conformity with the relevent provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF
>500,000 hrs.
MECHANICAL SPECIFICATIONS*
Weight
1kg
Dimensions (W,L,H) (mm)
125 x 213 x 62 (excluding mounting screws)
Connector Protection Ground
M6 screw
Connector AISG
IEC 60130-9 (Ed 3.0)
Ingress protection
IP65
Environmental
ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for
complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet
the high requirements for reliability, flexibility
and efficiency in remote control of towermounted telecommunication equipment.
This system consists of a Master Control Unit
(MCU) that controls the Antenna Line Devices
(ALDs) and supplies DC power to them via a
common bus, ALDs are connected to the MCU
using a separate ALD system cable or by using
the existing RF feeders in your s
Updated: 2010-08-19
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
484
Remote Electrical Tilt
POWERWAVE
Triple Band RET
Remote Electrical Tilt
Triple Band RET
Standard
AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)
AISG v1.1
Start-up
Power Supply Surge
Current
Consumption(idle)
Part Number
Page
+10 to +30 V
<1mC
19V
8230.40
486
+10 to +30 V
<1mC
19V
8230.10
487
485
POWERWAVE
8230.40
Remote Electrical Tilt
Triple Band RET
ELECTRICAL SPECIFICATIONS*
Product Number
8230.40
Standard
AISG V2.0/3GPP (AISG1.1)
Power supply
+10 to +30 V
Start up surge
<1mC
Current Consumption during tilting
<400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle
<100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate
9.6 kbps
Rod positioning accuracy
< +/- 0.8mm
Operating Temperature
-40 to +65° C
Type Approvals
Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF
>500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight
1 kg
Dimensions (W,L,H) (mm)
125 x 213 x 62 (excluding mounting screws)
Connector Protection Ground
M6 screw
Connector AISG
IEC 60130-9 (Ed 3.0)
Ingress protection
IP65
Environmental
ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for
complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet
the high requirements for reliability, flexibility
and efficiency in remote control of towermounted telecommunication equipment.
This system consists of a Master Control Unit
(MCU) that controls the Antenna Line Devices
(ALDs) and supplies DC power to them via a
common bus, ALDs are connected to the MCU
using a separate ALD system cable or by using
the existing RF feeders in your system.
Updated: 2010-08-19
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
486
POWERWAVE
8230.10
Remote Electrical Tilt
Triple Band RET
ELECTRICAL SPECIFICATIONS*
Product Number
8230.10
Standard
AISG v1.1 (AISG V2.0/3GPP)
Power supply
+10 to +30 V
Start up surge
<1mC
Current Consumption during tilting
<400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle
<100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate
9.6 kbps
Rod positioning accuracy
< +/- 0.8mm
Operating Temperature
-40 to +65° C
Type Approvals
Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF
>500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight
1 kg
Dimensions (W,L,H) (mm)
125 x 213 x 62 (excluding mounting screws)
Connector Protection Ground
M6 screw
Connector AISG
IEC 60130-9 (Ed 3.0)
Ingress protection
IP65
Environmental
ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for
complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet
the high requirements for reliability, flexibility
and efficiency in remote control of towermounted telecommunication equipment.
This system consists of a Master Control Unit
(MCU) that controls the Antenna Line Devices
(ALDs) and supplies DC power to them via a
common bus, ALDs are connected to the MCU
using a separate ALD system cable or by using
the existing RF feeders in your s
Updated: 2010-08-19
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
487
Remote Electrical Tilt
POWERWAVE
iRET Antenna Controller Module
Remote Electrical Tilt
iRET Antenna Controller Module 8510
Standard
AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)
AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)
Start-up
Power Supply Surge
Current
Consumption(idle)
Part Number
Page
+10 to +30 V
<1mC
19V
8510.10
489
+10 to +30 V
<1mC
19V
8510.40
490
488
POWERWAVE
8510.10
Remote Electrical Tilt
iRET ANTENNA CONTROLLER MODULE
ELECTRICAL SPECIFICATIONS*
Product Number
8510.10
Standard
AISG1.1 (AISG V2.0/3GPP , Ericsson configurable)
Power supply
+10 to +30 V
Start up surge
<1mC
Current Consumption during tilting
<400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle
<100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate
9.6 kbps
Rod positioning accuracy
NA
Operating Temperature
-40 to +65°C
Type Approvals
Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF
>500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight
0.33 kg
Dimensions (W,L,H) (mm)
125 x 65 x 26 (excluding connectors)
Connector Protection Ground
Grounded Via Antenna
Connector AISG
IEC 60130-9 (Ed 3.0)
Ingress protection
IP65
Environmental
ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for
complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet
the high requirements for reliability, flexibility
and efficiency in remote control of towermounted telecommunication equipment.
This system consists of a Master Control Unit
(MCU) that controls the Antenna Line Devices
(ALDs) and supplies DC power to them via a
common bus, ALDs are connected to the MCU
using a separate ALD system cable or by using
the existing RF feeders in your system
Updated: 2010-05-30
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
489
POWERWAVE
8510.40
Remote Electrical Tilt
iRET ANTENNA CONTROLLER MODULE
ELECTRICAL SPECIFICATIONS*
Product Number
8510.40
Standard
AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)
Power supply
+10 to +30 V
Start up surge
<1mC
Current Consumption during tilting
<400mA at Vin <19V, <250 mA at Vin >19V
Current Consumption idle
<100mA at Vin <19V, <50mA at Vin >19V
AISG Data Rate
9.6 kbps
Rod positioning accuracy
NA
Operating Temperature
-40 to +65°C
Type Approvals
Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG
MTBF
>500.000 hrs.
MECHANICAL SPECIFICATIONS*
Weight
0.33 kg
Dimensions (W,L,H) (mm)
125 x 65 x 26 (excluding connectors)
Connector Protection Ground
Grounded Via Antenna
Connector AISG
IEC 60130-9 (Ed 3.0)
Ingress protection
IP65
Environmental
ETSI 300 019
*All specifications subject to change without notice. Please contact your Powerwave representative for
complete performance data.
RET SYSTEM*
Powerwave RET system is designed to meet
the high requirements for reliability, flexibility
and efficiency in remote control of towermounted telecommunication equipment.
This system consists of a Master Control Unit
(MCU) that controls the Antenna Line Devices
(ALDs) and supplies DC power to them via a
common bus, ALDs are connected to the MCU
using a separate ALD system cable or by using
the existing RF feeders in your system
Updated: 2010-05-31
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
490
Master Control Unit
POWERWAVE
Master Control Unit
Remote Electrical Tilt
Master Control Unit
Type
Current Consumption
Power Supply
Part Number
Page
Master Control Unit
115/230 VAC 1.7 / 1.0A
AC
7070.10 (AC)
492
Master Control Unit
24V / <5.0A
24V
7070.30 (24 V)
493
Master Control Unit
48V / <2.5A
-48V
7070.50 (-48V)
494
Layer One Converter
Master Control Unit
115/230 VAC 1.7 / 1.0A
AC
7072.10 (AC)
495
Layer One Converter
Master Control Unit
24V / <5.0A
24V
7072.30 (24 V)
496
Layer One Converter
Master Control Unit
48V / <2.5A
-48V
7072.50 (-48V)
497
491
POWERWAVE
Master Control Unit
7070.10 (AC)
Master Control Unit
ELECTRICAL SPECIFICATIONS
Power supply
AC
AC / Current consumption
115/230 VAC 1.7 / 1.0A
ALD supply voltage
+24 V DC
Max current draw per connector
2.7 A
Total current draw all connectors
3.48 A
Surge at start up all connectors
54 mC during <10 ms
LOCAL ALARM PORTS (IN port)
Output voltage at open
5 ±1 V
Output current at closed
5 ± 2mA
LOCAL CONTROL PORTS
(Out ports, 3-pole relays)
Max input Voltage
30 V DC
Max input current
0.5 A
AISG data rate
9.6 kbps, 38.4 kbps
Weight
< 2.5 kg
Dimensions
Width 19” rack, Height 44mm, Depth 207mm
ENVIRONMENTAL SPECIFICATIONS
DC power supply
CAP 2 Circuit universal MATE-N-LOK 350778-1
AC power supply
IEC/EB60320-1 Male
RET 1 to 3
IEC 60130-9 (Ed. 3.0)
Site LAN
4-pole RJ45 MDI
Local (Ethernet port)
4-pole RJ45 MDI
RS-232
9-pin d-SUB male
Local alarm
Connector panel
Type Approvals
Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.
MTBF
>250.000 hrs
Operating temperature
-5C to 60C
Environmental
ETSI 300 019 * Weather-protected locations*
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08237 Rev A
Updated: 2008-03-31
492
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Master Control Unit
7070.30 (24 V)
Master Control Unit
ELECTRICAL SPECIFICATIONS
Power supply
24V
DC / Current consumption
24V / <5.0A
ALD supply voltage
+24 V DC
Max current draw per connector
2.7 A
Total current draw all connectors
3.48 A
Surge at start up all connectors
54 mC during <10 ms
LOCAL ALARM PORTS (IN port)
Output voltage at open
5 ±1 V
Output current at closed
5 ± 2mA
LOCAL CONTROL PORTS
(Out ports, 3-pole relays)
Max input Voltage
30 V DC
Max input current
0.5 A
AISG data rate
9.6 kbps, 38.4 kbps
Weight
< 2.5 kg
Dimensions
Width 19” rack, Height 44mm, Depth 207mm
ENVIRONMENTAL SPECIFICATIONS
DC power supply
CAP 2 Circuit universal MATE-N-LOK 350778-1
AC power supply
IEC/EB60320-1 Male
RET 1 to 3
IEC 60130-9 (Ed. 3.0)
Site LAN
4-pole RJ45 MDI
Local (Ethernet port)
4-pole RJ45 MDI
RS-232
9-pin d-SUB male
Local alarm
Connector panel
Type Approvals
Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.
MTBF
>250.000 hrs
Operating temperature
-5C to 60C
Environmental
ETSI 300 019 * Weather-protected locations*
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08237 Rev A
Updated: 2008-10-22
493
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Master Control Unit
7070.50 (-48V)
Master Control Unit
ELECTRICAL SPECIFICATIONS
Power supply
-48V
DC / Current consumption
48V / <2.5A
ALD supply voltage
+24 V DC
Max current draw per connector
2.7 A
Total current draw all connectors
3.48 A
Surge at start up all connectors
54 mC during <10 ms
LOCAL ALARM PORTS (IN port)
Output voltage at open
5 ±1 V
Output current at closed
5 ± 2mA
LOCAL CONTROL PORTS
(Out ports, 3-pole relays)
Max input Voltage
30 V DC
Max input current
0.5 A
AISG data rate
9.6 kbps, 38.4 kbps
Weight
< 2.5 kg
Dimensions
Width 19” rack, Height 44mm, Depth 207mm
ENVIRONMENTAL SPECIFICATIONS
DC power supply
CAP 2 Circuit universal MATE-N-LOK 350778-1
AC power supply
IEC/EB60320-1 Male
RET 1 to 3
IEC 60130-9 (Ed. 3.0)
Site LAN
4-pole RJ45 MDI
Local (Ethernet port)
4-pole RJ45 MDI
RS-232
9-pin d-SUB male
Local alarm
Connector panel
Type Approvals
Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.
MTBF
>250.000 hrs
Operating temperature
-5C to 60C
Environmental
ETSI 300 019 * Weather-protected locations*
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08237 Rev A
Updated: 2008-03-31
494
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Master Control Unit
7072.10 (AC)
Layer One Converter Master Control Unit
ELECTRICAL SPECIFICATIONS
Power supply
AC
AC / Current consumption
115/230 VAC 1.7 / 1.0A
ALD supply voltage
+24 V DC
Max current draw per connector
2.7 A
Total current draw all connectors
3.48 A
Surge at start up all connectors
54 mC during <10 ms
LOCAL ALARM PORTS (IN port)
Output voltage at open
5 ±1 V
Output current at closed
5 ± 2mA
LOCAL CONTROL PORTS
(Out ports, 3-pole relays)
Max input Voltage
30 V DC
Max input current
0.5 A
AISG data rate
9.6 kbps, 38.4 kbps
Weight
< 2.5 kg
Dimensions
Width 19” rack, Height 44mm, Depth 207mm
ENVIRONMENTAL SPECIFICATIONS
DC power supply
CAP 2 Circuit universal MATE-N-LOK 350778-1
AC power supply
IEC/EB60320-1 Male
RET 1 to 3
SMA (female)
Site LAN
4-pole RJ45 MDI
Local (Ethernet port)
4-pole RJ45 MDI
RS-232
9-pin d-SUB male
Local alarm
Connector panel
Type Approvals
Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.
MTBF
>250.000 hrs
Operating temperature
-5C to 60C
Environmental
ETSI 300 019 * Weather-protected locations*
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08238 Rev A
Updated: 2008-05-20
495
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Master Control Unit
7072.30 (24 V)
Layer One Converter Master Control Unit
ELECTRICAL SPECIFICATIONS
Power supply
24V
DC / Current consumption
24V / <5.0A
ALD supply voltage
+24 V DC
Max current draw per connector
1.16 A
Total current draw all connectors
3.48 A
Surge at start up all connectors
54 mC during <10 ms
LOCAL ALARM PORTS (IN port)
Output voltage at open
5 ±1 V
Output current at closed
5 ± 2mA
LOCAL CONTROL PORTS
(Out ports, 3-pole relays)
Max input Voltage
30 V DC
Max input current
0.5 A
AISG data rate
9.6 kbps, 38.4 kbps
Weight
< 2.5 kg
Dimensions
Width 19” rack, Height 44mm, Depth 207mm
ENVIRONMENTAL SPECIFICATIONS
DC power supply
CAP 2 Circuit universal MATE-N-LOK 350778-1
AC power supply
IEC/EB60320-1 Male
RET 1 to 3
SMA (female)
Site LAN
4-pole RJ45 MDI
Local (Ethernet port)
4-pole RJ45 MDI
RS-232
9-pin d-SUB male
Local alarm
Connector panel
Type Approvals
Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.
MTBF
>250.000 hrs
Operating temperature
-5C to 60C
Environmental
ETSI 300 019 * Weather-protected locations*
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08238 Rev A
Updated: 2008-10-22
496
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Master Control Unit
7072.50 (-48V)
Layer One Converter Master Control Unit
ELECTRICAL SPECIFICATIONS
Power supply
-48V
DC / Current consumption
48V / <2.5A
ALD supply voltage
+24 V DC
Max current draw per connector
1.16 A
Total current draw all connectors
3.48 A
Surge at start up all connectors
54 mC during <10 ms
LOCAL ALARM PORTS (IN port)
Output voltage at open
5 ±1 V
Output current at closed
5 ± 2mA
LOCAL CONTROL PORTS
(Out ports, 3-pole relays)
Max input Voltage
30 V DC
Max input current
0.5 A
AISG data rate
9.6 kbps, 38.4 kbps
Weight
< 2.5 kg
Dimensions
Width 19” rack, Height 44mm, Depth 207mm
ENVIRONMENTAL SPECIFICATIONS
DC power supply
CAP 2 Circuit universal MATE-N-LOK 350778-1
AC power supply
IEC/EB60320-1 Male
RET 1 to 3
SMA (female)
Site LAN
4-pole RJ45 MDI
Local (Ethernet port)
4-pole RJ45 MDI
RS-232
9-pin d-SUB male
Local alarm
Connector panel
Type Approvals
Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.
MTBF
>250.000 hrs
Operating temperature
-5C to 60C
Environmental
ETSI 300 019 * Weather-protected locations*
*All specifications subject to change without notice. Contact your Powerwave representative for complete performance data.
D031-08238 Rev A
Updated: 2008-06-02
497
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Remote Electrical Tilt
POWERWAVE
Current Injector Layer One Converter
Remote Electrical Tilt
Current Injector Layer One Converter
Frequency Range (MHz)
806-960 MHz and 1710-2180
MHz
806-960 MHz and 1710-2180
MHz
698-960 MHz and 1710-2180
MHz
Insertion Loss Return Loss Return Loss
(dB)
(dB) ANT Port (dB) BTS Port Part Number
Page
<0.2 dB
>20 dB
>20 dB
7060.00 (ANT)
499
<0.2 dB
>20 dB
>20 dB
7060.10 (BTS)
500
<0.2 dB
>20 dB
>20 dB
7060.05 (ANT)
501
698-960 MHz and 1710-2180
MHz
<0.2 dB
>20 dB
>20 dB
7060.15 (BTS)
502
800-2300 MHz
<0.1 dB
>22 dB
>22 dB
1001940 (BTS
side)
503
800-2300 MHz
<0.1 dB
>22 dB
>22 dB
1001983 (ANT
side)
504
498
POWERWAVE
Current Injector Layer One Converter
7060.00 (ANT)
Current Injector Layer One Converter
ELECTRICAL DATA
Range(MHz)
806-960 MHz and 1710-2180 MHz
Frequency Range
806-960 MHz and 1710-2180 MHz
Insertion Loss(dB)
<0.2 dB
Return Loss(dB) ANT Port
>20 dB
Return Loss(dB) BTS Port
>20 dB
Passive Intermodulation 2X43 dBm
<-116 dBm
Power Handling(dBm)
Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm
Power Supply
+9 to +31 V
Current Consumption
< 50 mA
Current Handling
= 1.3 A
AISG Data Rate
9.6 kbps, 38.4 kbps
Up-Link(MHz)
1850-1910
Down-link(MHz)
1930-1990
Power Consumption
N/A
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
<48 x 92 x 80
Weight(kg)
<750 g
RF Connectors
DIN 7/16 female/ male
AISG Output
IEC 60130-9 E (Ed 3.0)
Protection Ground
M8 screw
Type Approvals
Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG
Ingress Protection IP65
N/A
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C)
-40 to +65 C
MTBF
> 500,000 hrs
Ingress Protection
IP65
APPROVAL AND TESTS
Environmental
ETSI 300 019
Type Approvals
Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG
The purpose of this long sentence is
to push down the line.
D031-08236 Rev A
Updated: 2010-04-05
499
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Current Injector Layer One Converter
7060.10 (BTS)
Current Injector Layer One Converter
ELECTRICAL DATA
Range(MHz)
806-960 MHz and 1710-2180 MHz
Frequency Range
806-960 MHz and 1710-2180 MHz
Insertion Loss(dB)
<0.2 dB
Return Loss(dB) ANT Port
>20 dB
Return Loss(dB) BTS Port
>20 dB
Passive Intermodulation 2X43 dBm
<-116 dBm
Power Handling(dBm)
Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm
Power Supply
+9 to +31 V
Current Consumption
< 50 mA
Current Handling
= 1.3 A
AISG Data Rate
9.6 kbps, 38.4 kbps
Up-Link(MHz)
1850-1910
Down-link(MHz)
1930-1990
Power Consumption
N/A
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
<48 x 92 x 80
Weight(kg)
<750 g
RF Connectors
DIN 7/16 female/ male
AISG Output
IEC 60130-9 E (Ed 3.0)
Protection Ground
M8 screw
Type Approvals
Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG
Ingress Protection IP65
N/A
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C)
-40 to +65 C
MTBF
> 500,000 hrs
Ingress Protection
IP65
APPROVAL AND TESTS
Environmental
ETSI 300 019
Type Approvals
Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG
The purpose of this long sentence is
to push down the line.
D031-08236 Rev A
Updated: 2010-04-05
500
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Current Injector Layer One Converter
7060.05 (ANT)
Current Injector Layer One Converter
ELECTRICAL DATA
Range(MHz)
698-960 MHz and 1710-2180 MHz
Frequency Range
698-960 MHz and 1710-2180 MHz
Insertion Loss(dB)
<0.2 dB
Return Loss(dB) ANT Port
>20 dB
Return Loss(dB) BTS Port
>20 dB
Passive Intermodulation 2X43 dBm
<-116 dBm
Power Handling(dBm)
Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm
Power Supply
+9 to +31 V
Current Consumption
< 50 mA
Current Handling
= 1.3 A
AISG Data Rate
9.6 kbps, 38.4 kbps
Up-Link(MHz)
Down-link(MHz)
Power Consumption
N/A
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
<48 x 92 x 80
Weight(kg)
<750 g
RF Connectors
7/16 Male/BTS, Female/ANT side
AISG Output
IEC 60130-9 E (Ed 3.0)
Protection Ground
M8 screw
Type Approvals
Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG
Ingress Protection IP65
N/A
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C)
-40 to +65 C
MTBF
> 500,000 hrs
Ingress Protection
IP65
APPROVAL AND TESTS
Environmental
ETSI 300 019
Type Approvals
Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG
The purpose of this long sentence is
to push down the line.
D031-08236 Rev B
Updated: 2010-04-05
501
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Current Injector Layer One Converter
7060.15 (BTS)
Current Injector Layer One Converter
ELECTRICAL DATA
Range(MHz)
698-960 MHz and 1710-2180 MHz
Frequency Range
698-960 MHz and 1710-2180 MHz
Insertion Loss(dB)
<0.2 dB
Return Loss(dB) ANT Port
>20 dB
Return Loss(dB) BTS Port
>20 dB
Passive Intermodulation 2X43 dBm
<-116 dBm
Power Handling(dBm)
Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm
Power Supply
+9 to +31 V
Current Consumption
< 50 mA
Current Handling
= 1.3 A
AISG Data Rate
9.6 kbps, 38.4 kbps
Up-Link(MHz)
Down-link(MHz)
Power Consumption
N/A
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
<48 x 92 x 80
Weight(kg)
<750 g
RF Connectors
7/16 Female/BTS, Male/ANT side
AISG Output
IEC 60130-9 E (Ed 3.0)
Protection Ground
M8 screw
Type Approvals
Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG
Ingress Protection IP65
N/A
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C)
-40 to +65 C
MTBF
> 500,000 hrs
Ingress Protection
IP65
APPROVAL AND TESTS
Environmental
ETSI 300 019
Type Approvals
Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG
The purpose of this long sentence is
to push down the line.
D031-08236 Rev B
Updated: 2010-04-05
502
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
1001940 (BTS side)
Current Injector Layer One Converter
Current Injector Layer One Converter
High RF power CILOC for communication and DC supply over the RF feeder to the ALDs
ELECTRICAL DATA
Range(MHz)
Frequency Range
800-2300
Insertion Loss(dB)
<0.1 dB
Return Loss(dB) ANT Port
>22 dB
Return Loss(dB) BTS Port
>22 dB
Passive Intermodulation 2X43 dBm
<-130 dBm (7th)
Power Handling(dBm)
750W =500W (800 MHz)+ 250W (1900MHz)
Power Supply
+10 to+30V
Current Consumption
Current Handling
<4.0 A
AISG Data Rate
9.6 kbps,38.4 kbps
Up-Link(MHz)
Down-link(MHz)
Power Consumption
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
< 3.7 x 1.7 x 5.7 excl. conn
Weight(kg)
<2
RF Connectors
DIN 7/16 female/male
AISG Output
Protection Ground
Type Approvals
Bellcore #TA-NWT-000487 Procedure 4.11
Ingress Protection IP65
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C)
-40 to +85C
MTBF
>500.000 hrs.
Ingress Protection
IP67
APPROVAL AND TESTS
Environmental
Type Approvals
Bellcore #TA-NWT-000487 Procedure 4.11
The purpose of this long sentence is
to push down the line.
Updated: 2010-04-05
503
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
1001983 (ANT side)
Current Injector Layer One Converter
Current Injector Layer One Converter
High RF power CILOC for communication and DC supply over the RF feeder to the ALDs
ELECTRICAL DATA
Range(MHz)
Frequency Range
800-2300
Insertion Loss(dB)
<0.1 dB
Return Loss(dB) ANT Port
>22 dB
Return Loss(dB) BTS Port
>22 dB
Passive Intermodulation 2X43 dBm
<-130 dBm (7th)
Power Handling(dBm)
750W =500W (800 MHz)+ 250W (1900MHz)
Power Supply
+10 to+30V
Current Consumption
Current Handling
<4.0 A
AISG Data Rate
9.6 kbps,38.4 kbps
Up-Link(MHz)
Down-link(MHz)
Power Consumption
MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)
< 3.7 x 1.7 x 5.7 excl. conn
Weight(kg)
<2
RF Connectors
DIN 7/16 female/male
AISG Output
Protection Ground
Type Approvals
Bellcore #TA-NWT-000487 Procedure 4.11
Ingress Protection IP65
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C)
-40 to +85C
MTBF
>500.000 hrs.
Ingress Protection
IP67
APPROVAL AND TESTS
Environmental
Type Approvals
Bellcore #TA-NWT-000487 Procedure 4.11
The purpose of this long sentence is
to push down the line.
Updated: 2010-04-05
504
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Remote Electrical Tilt
POWERWAVE
RET System Cables
Remote Electrical Tilt
RET System Cables
Continuous
Current DC
Ports
Continuous AISG
Output Input
Operation
Temperature
Range
3.5 A
IEC 60130-9 (Ed. 3.0) -40 to +65C
3.5 A
IEC 60130-9 (Ed. 3.0) -40 to +65C
505
Part
Number
Page
2x 0.25mm2 (388
mil2) + 3x 0.75mm2
(1162 mil2)
7085.XX
506
2x 0.25mm2 (388
mil2) + 3x 0.75mm2
(1162 mil2)
7095.XX
507
Conductor Area
POWERWAVE
7085.XX
RET System Cables
RET System Cables
SPECIFICATIONS*
Product Number
7085.XX
Continuous Current DC Ports
3.5 A
Connectors AISG Output Input
IEC 60130-9 (Ed. 3.0)
Operation Temperature Range
-40 to +65
Conductor Area
2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2)
Type Approvals
Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG
Ingress Protection
IP67 mated
Environmental
ETSI 300 019
Color
Black
7085.05
RET short cable 0.5m
7085.15
RET short cable 1.5m
7085.30
RET short cable 3.0m
7085.50
RET short cable 5.0m
8-Pin
Connector
ooPPPP
Updated: 2010-04-05
506
Pin 1
+12 V
+12 V
Pin 2
Not connected
Not connected
Pin 3
RS-485B
RS-485B
Pin 4
Not connected
Not connected
Pin 5
RS-485A
RS-485A
Pin 6
+24 V
+24 V
Pin 7
DC return
DC return
Pin 8
Not connected
Not connected
© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
7095.XX
RET System Cables
RET Systems Cable
SPECIFICATIONS*
Product Number
7095.XX
Continuous Current DC Ports
3.5 A
Connectors AISG Output Input
IEC 60130-9 (Ed. 3.0)
Operation Temperature Range
-40 to +65C
Conductor Area
2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2)
Type Approvals
Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG
Ingress Protection
IP67 mated
Environmental
ETSI 300 019
Color
Black
7095.10
RET long cable 10m
7095.20
RET long cable 20m
7095.30
RET long cable 30m
7095.40
RET long cable 40m
7095.50
RET long cable 50m
7095.60
RET long cable 60m
7095.70
RET long cable 70m
7095.80
RET long cable 80m
7095.90
RET long cable 90m
7095.110
RET long cable 110m
8-Pin
Connector
Updated: 2010-04-05
Pin 1
+12 V
+12 V
Pin 2
Not connected
Not connected
Pin 3
RS-485B
RS-485B
Pin 4
Not connected
Not connected
Pin 5
RS-485A
RS-485A
Pin 6
+24 V
+24 V
Pin 7
DC return
DC return
Pin 8
Not connected
Not connected
© Copyright 2011 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
507
Power wave
Indoor Antennas
The indoor antenna is designed to blend into a wall or
ceiling inside a building and is the base antenna for
the Powerwave distributed antenna system. The indoor
antenna covers all bands from 800 MHz up to 2500 MHz
and supports multiband operation. Easy-to-install dual
band antennas from Powerwave are deployed in numerous
wireless networks worldwide. Using fewer antennas of
discreetly functional design beats using numerous antennas
of unsightly size and appearance especially with today’s
aesthetic concerns.
Indoor Antennas
POWERWAVE
Indoor Antennas
Indoor Dual Band Antennas
Cross Polarized
Page
Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz
510
Indoor Multiband Antennas
Vertical Polarized
Page
Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz
509
512
Dual Band Indoor Antennas
POWERWAVE
Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz
Dual Band Indoor Antennas
Cross Polarized
Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
70
9/6.9, 9/6.9
0
216mm (8.5”)
7999.00
511
510
POWERWAVE
Dual Band Indoor Antennas
7999.00
Indoor/Outdoor Dual Band Cross Polarized
POLARIZATION: X-Pol
FREQUENCY (MHz): 800/1900
HORIZONTAL BEAM WIDTH (°): 70
GAIN (dBi/dBd): 9/6.9, 9/6.9
TILT: 0°
LENGTH: 216mm (8.5”)
ELECTRICAL SPECIFICATIONS*
800/1900
Frequency range (MHz)
Frequency band (MHz)
806-896
Gain (dBi/dBd)
1850-1990
9/6.9
Polarization
9/6.9
X-Pol
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.5:1
1.5:1
Horizontal beam width, -3 dB (°)
72
56
Vertical beam width, -3 dB (°)
70
60
Electrical down tilt (°)
0
0
Front to back ratio (dB) 180°±30° copolar
16
28
Cross polar discrimination (XPD) 0° (dB)
20
15
Cross polar discrimination (XPD) ±60° (dB)
8
IM3, 2xTx@43dBm (dBc)
4
<-141
Power handling, average total (W)
50
MECHANICAL SPECIFICATIONS*
Connector
2 x N Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
216x216x73.7 (8.5”x8.5”x2.9”)
Mounting
-
Weight, kg (lbs)
0.73 (1.6)
Operating Temperature
Radome material
-
Radome colour
RAL 7035, Light grey
Package size, HxWxD, mm (ft)
-
Shipping weight, kg (lbs)
-
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08182 Rev A
Updated: 2010-04-09
511
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Multiband Indoor Antennas
POWERWAVE
Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz
Multiband Indoor Antennas
Cross Polarized
Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz
Horizontal
Beamwidth
Gain dBi dBd
Tilt
Length
Part Number
Page
60/90
6/3.9, 9/6.9
0
0.210m (8")
7336.10
513
360
3/0.9
0
0.185m ( 7”)
7336.00
514
512
POWERWAVE
Multiband Indoor Antennas
7336.10
POLARIZATION: V-Pol
FREQUENCY (MHz): 800-2500
HORIZONTAL BEAM WIDTH (°): 60/90
GAIN (dBi/dBd): 6/3.9, 9/6.9
TILT: 0°
LENGTH: 0.210m (8”)
Indoor Multiband Panel Vertical Polarized
ELECTRICAL SPECIFICATIONS*
800-2500
Frequency range (MHz)
Frequency band (MHz)
Gain (dBi/dBd)
806-896
870-960
1700-1900
1900-2500
6.5/4.4
6.5/4.4
9.5/7.4
10/7.9
Polarization
Vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
<1.9:1
<1.5:1
<1.9:1
<1.8:1
Horizontal beam width, -3 dB (°)
95
85
65
60
Vertical beam width, -3 dB (°)
85
80
40
40
12
17
Electrical down tilt (°)
0
Front to back ratio (dB) 180°±30° copolar
16
15
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
50
MECHANICAL SPECIFICATIONS*
Connector
1 x N Female
Connector position
Bottom
Dimensions, HxWxD, mm (ft)
210 x 180 x 42 (8”x7”x2”)
Mounting
-
Weight, kg (lbs)
1.0 (2.2)
Operating Temperature
Radome material
ASA
Radome colour
White
Package size, HxWxD, mm (ft)
240x280x45 (9”x11”x2”)
Shipping weight, kg (lbs)
1.2 (2.6)
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08159 Rev A
Updated 04/09/2010
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
513
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Multiband Indoor Antennas
7336.00
POLARIZATION: V-Pol
FREQUENCY (MHz): 800-2500
HORIZONTAL BEAM WIDTH (°): 360
GAIN (dBi/dBd): 3/0.9
TILT: 0°
LENGTH: 0.185m ( 7”)
Indoor Multiband Vertical Polarized
ELECTRICAL SPECIFICATIONS*
800-2500
Frequency range (MHz)
Frequency band (MHz)
Gain (dBi/dBd)
806-896
870-960
1700-1900
1900-2500
3/0.9
3/0.9
3/0.9
3/0.9
Polarization
Vertical
1RPLQDO,PSHGDQFH ȍ
50
VSWR
1.5:1
1.5:1
1.5:1
1.5:1
Beam width: Ceiling Mounted (°)
360
360
360
360
Beam width: Wall Mounted (°)
70
70
70
70
IM3, 2xTx@43dBm (dBc)
<-150
Power handling, average total (W)
50
MECHANICAL SPECIFICATIONS*
Connector
1 x N Female
Connector position
Back
Dimensions, diameter x depth, mm (ft)
185 x65 (7” x 2.5”)
Mounting
-
Weight, kg (lbs)
0.2 (0.44)
Operating Temperature
Radome material
ABS
Radome colour
White
Package size, HxWxD, mm (ft)
210x200x115 (8”x8”x5”)
Shipping weight, kg (lbs)
0.36 (0.8)
*All specifications subject to change without notice. Please contact your Powerwave representative for complete
performance data.
ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.
D031-08158 Rev A
Updated: 2010-04-09
514
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Power wave
Clean Site™ Solutions
Powerwave’s Clean Site solutions minimize the visual
impact of a complete antenna system and significantly
reduce investment and operational costs for network
operators when building new or upgrading existing
networks.
Building permits for existing antenna installations can be
used when replacing old, passive antennas with the Clean
Site solution. This simplifies the site acquisition process
significantly and shortens roll-out time considerably.
All Clean Site antennas support remote electrical tilt for
optimization of the coverage footprint and tuning of network
performance. By integrating all functionality into one single
unit, Clean Site offers you a flexible and attractive solution
in the most cost-effective way.
Clean Site Solutions
POWERWAVE
Clean Site Solutions: Overview
The Powerwave Clean Site program integrates a full range of multiband solutions to make the most of
tower space. High-volume production in several countries ensures rapid delivery.
Our products provide design and installation flexibility that meet a variety of needs, such as enabling
co-siting of networks and systems and dealing with space and zoning issues limiting the appearance
and location of new installations.
Single System
The baseline for the Clean Site single system is our single band broadband antenna portfolio with
cross polar diversity for either low band or high band.
Our low band antenna covers the full frequency range from 806-960 MHz while the high band
antenna covers 1710- 2170 MHz. Customize your Clean Site single unit by combining a low band
antenna with a remote electrical tilt (RET) Unit or a high band antenna with a tower mounted
amplifier (TMA) for either an 1800, 1900 or 2100 frequency band and RET Unit. No matter the
combination, your customized Clean Site single system is contained in one single housing enclosure.
Dual System
The Clean Site dual solution's basic configuration stems from the Powerwave dual band low
band/high band antennas. Combine the dual band antenna with remote electrical tilt (RET) units,
tower mounted amplifiers (TMA) and diplex filters to suit your network requirements. As with all
Clean Site units, all of the necessary components are contained in one discrete enclosure.
Triple System
The Powerwave Clean Site triple solution is the most advanced antenna system within the Clean Site
program. The Clean Site triple solution is based on the high performance triple band antenna
platform and is the superior solution for co-siting. An old installed passive antenna can be replaced
by a Clean Site triple system with remote electrical tilt (RET) Control and two dual TMAs and two
triplexers without changing the visual impact.
IntelliMast
As a part of the Powerwave Clean Site program, the IntelliMast offers a flexible way of integrating
multi-sector solutions in a pole configuration under one single radome. IntelliMast-CS, supporting the
full broad band antenna range, is the mounting solution to use when more than one sector is covered
from a single location. If a crane free installation is required, the super light weight Intellimast-PL is
the solution to use, supporting the 1.4m (4 feet) multiband antennas. The IntelliMast solution offers
maximum sector coverage with minimum visual impact.
516
Power wave
Mounting Solutions
All Powerwave antennas are delivered with mounting
brackets pre-mounted. The intent is to reduce logistic
and tower crew installation costs for our customers. All
brackets have a high quality surface treatment to maintain
the Powerwave standard for product exposure to severe
environments. By using steel in the sheet metal parts of
the tilt brackets, a robust and rigid design is ensured.
Mounting Solutions
POWERWAVE
Mounting Solutions
Heavy Duty Tilt Bracket
Part Numbers
Page
7256.00
519
Tilt Bracket
Part Numbers
Page
7456.00A
520
Triple Mount Bracket
Part Numbers
Page
7454.00A
521
Large Pole Mounting Adapter
Part Numbers
Page
7458.00A
522
518
POWERWAVE
Mounting Solutions
7256.00
ANTENNA LENGTH: =1.5 meter/5 feet
Heavy Duty Tilt Bracket Kit
WEIGHT: 5.5 kg/ 12.1 lbs
CROSS REFERENCE TABLE
Family
Part Number
LBB65
747x.xx, 747x.xxA, 547x.xx, 746x.0ST.xxxx.xx
LBB90
748x.xx, 748x.xxA, 548x.xx
DHBB
776x.xx, 776x.xxA, 576x.xx, 876x.0ST.xxxx.xx
DBB65
775x.xx, 775x.xxA, 5475x.xx, 875x.0ST.xxxx.xx
DBB90
777x.xx
TBB65
778x.xx, 778x.xxA, 578x.xx, 878x.0ST.xxxx.xx
ALP
7804.00, 7824.00, 7834.00, 7838.00
City
7143.xx.xx.xx, 7144.xx.xx.xx, 7145.xx.xx.xx
Urban
7218.1x
Xurban
7227.1x
AL Antennas
7840.x0, 7850.x0, 7329.0x, 7330.0x, 7331.0x, 7332.0x, 7333.0x, 7334.0x
5 Series
547x.xx, 548x.xx, 576x.xx, 575x.xx, 578x.xx, 5722.xx
MECHANICAL DRAWINGS
TILT ANGLE GRAPH
MECHANICAL SPECIFICATIONS
Dimensions, H x W x D
See Drawings
Weight
5.5 kg/ 12.1 lbs
Material
Galvanized steel
Packing size, H x W x D
Call for info
Shipping weight
5.9 kg/ 13 lbs
Tilt range
See diagram
Pole dimension
25.4-114.3 mm (1-4.5”)
Panning range
NA
Accessory products
Triple Mount Bracket 7454.00
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested
together with their corresponding brackets.
Random Vibration:
Sinus Vibration:
IEC 60068-2-64
IEC 60028-2-6
Salt Mist: IEC 68-2-11, test Ka, 35° C, 48h, 5% salt
Updated: 2010-10-25
519
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Mounting Solutions
7456.00A
ANTENNA LENGTH: <1.5 meter/ 5 feet
Tilt Bracket Kit
WEIGHT: 3.6 kg/7.9 lbs
CROSS REFERENCE TABLE
Family
Part Number
LBB65
NA
LBB90
NA
DHBB
NA
DBB65
NA
DBB90
NA
TBB65
NA
ALP
NA
City
NA
Urban
7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x, 7275.0x,
7276.0x, 7277.0x, 7278.0x
Xurban
7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x
AL Antennas
7337.0x, 7338.0x, 7339.0x
5 Series
570x.0x, 572x.x, 5735.x0, 5740.x0, 5745.x0
MECHANICAL DRAWINGS
TILT ANGLE GRAPH
MECHANICAL SPECIFICATIONS
Dimensions, H x W x D
See Drawings
Weight
3.6 kg/7.9 lbs
Material
Galvanized steel, stainless screws & nuts
Packing size, H x W x D
Call for info
Shipping weight
4.0 kg/ 8.8 lbs
Tilt range
See diagram
Pole dimension
25-115 mm
Panning range
NA
Accessory products
Panning Kit 2201.11/ Big Pole Clamp, 7458.00/
Flush wall, pole clamp 7455.00 and Triple Mount
Bracket 7454.00
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested
together with their corresponding brackets.
Random Vibration:
Sinus Vibration:
IEC 60068-2-64
IEC 60028-2-6
Salt Mist: IEC 68-2-11, test Ka, 35° C, 48h, 5% salt
D031-08419 Rev. A
Updated: 2010-04-05
520
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Mounting Solutions
7454.00A
ANTENNA LENGTH: =1.5 meter/5 feet
Triple Mount Bracket
WEIGHT: 1.5 kg/3.3 lbs
The Powerwave Triple Mount Bracket allows the mounting of three antennas on a single support for a sturdy and elegant installation. The Triple Mount Bracket permits
independent mechanical and electrical tilting of each sector, offering unparalleled versat
CROSS REFERENCE TABLE
Family
Part Number
LBB65
747x.xx
LBB90
748x.xx
DHBB
776x.xx
DBB65
775x.x0
DBB90
777x.x0
TBB65
778x.x0
ALP
7804.00, 7824.00, 7834.00, 7838.00
City
7143.xx.xx.xx, 7144.xx.xx.xx, 7145.xx.xx.xx
Urban
7218.1x, 7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x,
7275.0x, 7276.0x, 7277.0x, 7278.0x
Xurban
7227.1x, 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x
AL Antennas
7337.0x, 7338.0x, 7339.0x, 7840.x0, 7850.x0, 7329.0x, 7330.0x, 7331.0x, 7332.0x, 7333.0x, 7334.0x
5 Series
747x.xx, 748x.xx, 570x.0x, 572x.x, 5735.x0, 5740.x0, 5745.x0, 776x.xx, 775x.x0, 777x.x0, 778x.x0
MECHANICAL DRAWINGS
TILT ANGLE GRAPH
MECHANICAL SPECIFICATIONS
Dimensions, H x W x D
See Drawings
Weight
6.8 kg/15 lbs
Material
Steel
Packing size, H x W x D
Call for info
Shipping weight
Call for info
Tilt range
See diagram, Only antennas <1.5 m/ 5 feet
Pole dimension
75-114 mm
Panning range
Call for info
Accessory products
Can be used with antenna tilt brackets 7456.00A
and 7256.00
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested
together with their corresponding brackets.
Random Vibration:
Sinus Vibration:
NA
NA
Salt Mist: NA
D031-08417 Rev. A
Updated: 2010-04-05
521
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
POWERWAVE
Mounting Solutions
7458.00A
ANTENNA LENGTH: <1.5 meter/ 5 feet
Large Pole Mounting Adapter
WEIGHT: 9.5 kg/ 20.9 lbs
Powerwave large pole mounting adapter is to be used with Powerwave antennas shorter than 1.5 meter/5 feet, see table below. Only one kit per antenna.
CROSS REFERENCE TABLE
Family
Part Number
LBB65
NA
LBB90
NA
DHBB
NA
DBB65
NA
DBB90
NA
TBB65
NA
ALP
NA
City
NA
Urban
7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x, 7275.0x,
7276.0x, 7277.0x, 7278.0x
Xurban
7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x
AL Antennas
7337.0x, 7338.0x, 7339.0x
5 Series
NA
MECHANICAL DRAWINGS
TILT ANGLE GRAPH
MECHANICAL SPECIFICATIONS
Dimensions, H x W x D
See Drawings
Weight
9.5 kg/ 20.9 lbs
Material
Galvanized steel, stainless screws & nuts
Packing size, H x W x D
200 x 200 x 20 (mm)
Shipping weight
10 kg/22 lbs
Tilt range
NA
Pole dimension
Max 215/ mm 78.5”
Panning range
NA
Accessory products
To be used with antenna tilt brackets 7456.00A
All brackets fulfill the requirements stated in the standards to follow. Antennas are tested
together with their corresponding brackets.
Random Vibration:
Sinus Vibration:
IEC 60068-2-64
IEC 60028-2-6
Salt Mist: IEC 68-2-11, test Ka, 35° C, 48h, 5% salt
D031-08520 Rev. A
Updated: 2010-04-05
522
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
Antenna FAQ
POWERWAVE
Antenna FAQ
Q:
Are your indoor antennas broadband (7336.00, 7336.10)?
A:
Yes, these antennas work from 806 MHz through 2.5 GHz, providing an effective solution for
multiple technologies such as iDEN, CDMA, GSM, UMTS, WiFi to name a few.
Q:
Why do you specify different gain for the same antenna in your data sheet?
A:
The gain is dependent on the frequency used. The stacking distance of the elements is changed
relative to the frequency. This means that the gain will increase with a higher frequency.
Powerwave always tries to give you the best information possible, and therefore we specify the gain
at common used frequency to help you implement the antennas easily in your network.
Q:
Why do you use different materials in your radomes?
A:
Mechanical structure of antennas are designed in different ways. Powerwave uses either the
reflector as the structure, or the radome in a combination with the reflector. When using the reflector
as the base for the mechanical structure, the radome is only used for weather protection, and
therefore we use a light plastic radome (ASA/GRP). When increasing the size of an antenna there
is no benefit to use the reflector as the mechanical structure as it would increase the overall weight
of the product. Therefore, when building larger sized antennas, Powerwave utilizes a combination of
reflector and radome as the mechanical structure. Normally, a glass fibre radome is used in the
latter instances. Thus, the mechanical structures of the Powerwave antennas are designed to
minimize product weight while maintaining a robust and reliable solution.
Q:
Why do you have different gain on your triple band antennas?
A:
Powerwave designs triple band antennas by using one low band antenna throughout the whole
length, while you have the two upper band antennas on top of each other. This means that the high
band antenna at the upper part of the antenna needs more internal cabling compared to the high
band antenna at the lower part. This extra internal cabling introduces some more losses, and the
result is that the gain of the upper high band antenna is slightly lower.
Q:
How do I get antenna patterns?
A:
The antenna patterns are available at our webpage, please visit:
www.powerwave.com/antennapatterns.asp. On this page you are able to download our antenna
patterns for many different planning tools. Please contact us if you need assistance.
Q:
You are mentioning broadband antennas - how do you define that?
A:
When Powerwave is stating broadband antennas, we are indicating that these can be used for more
than one system. We usually state low broadband, meaning that the antennas can be used for
systems operating from 806 to 960 MHz. High band usually means that the antennas can be used
for systems from 1710 to 2170. Some antennas may differ from this. The reason why we design
and produce broadband antennas is to achieve logistical benefits for our global customer base,
allowing for deployments in all markets worldwide.
523
Power wave
Network Management
Powerwave’s NetWay™ solution suite maximizes return
on investment of wireless infrastructure by enabling
network discovery, diagnosis and resolution from a
centralized software interface in combination with networkaware hardware. NetWay gives you all the tools for fault,
configuration, performance and security management.
Centrally monitor and manage critical network resources,
and adjust cell coverage during peak and off-peak hours,
saving time, money and reducing the carbon footprint
through fewer truck rolls.
POWERWAVE
NWV-001
NetWay Vision Software Solution
NetWay Vision Management Module
The NetWay Vision software product is an Element Management System (EMS), developed and supported by Powerwave Technologies. The NetWay Vision product
provides service providers with centralized monitoring and management capabilities for advanced wireless systems, supplied by Powerwave Technologies.
GENERAL SPECIFICATIONS
NetWay Vision Licensing
Software license based on number of managed network elements and number of con-current PC client users
NetWay Server Requirements
Rack mounted or standalone Intel Based Server equipped with, Ethernet 100/1000 Base-T Network Interface,
Windows Server OS 2003/2008
User PC Client Requirements
Intel Based PC equipped with Color Monitor, Ethernet 10/100/1000 Base-T Network Interface, Windows XP,
Internet Explorer 6/7
Standard Warranty
Updates and fixes for one full year, after installation of NetWay Vision is completed
Extended Warranty
Yearly Software Upgrades and Yearly Updates are available and can be separately purchased
Documentation
User Guide: D044-05258, Administrator Guide: D044-05313
Commercialize
Current Release NetWay Vision R3.5.0 (Aug - 2010)
Planned upcoming Release NetWay Vision R3.6.0 (Dec - 2010)
Updated: 2010-11-30
© Copyright 2010 Powerwave Technologies, Inc. All rights reserved.
525
All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.
PartPart
Number
Index
Number
Index Part N
POWERWAVE
Part Number
010-11177-0214
010-11182-02nn
010-11183-02nn
010-50025-0232
1001940 (BTS side)
1001983 (ANT side)
24501, 24511
25001, 25011
25002, 25012
25014, 25016
25101, 25111
25102, 25112
25103, 25113
4168.11.33.00
4168.11.33.02
4168.11.33.03
4168.11.33.06
4168.11.33.52
4168.21.33.00
4168.21.33.03
5471.00
5472.00
5473.00
5477.00
5478.00
5478.06
5483.00
5488.00
5701.02
5721.00
5721.02
5722.00
5782.00
7060.00 (ANT)
7060.05 (ANT)
7060.10 (BTS)
7060.15 (BTS)
7070.10 (AC)
7070.30 (24 V)
7070.50 (-48V)
7072.10 (AC)
7072.30 (24 V)
7072.50 (-48V)
7085.XX
7095.XX
7216.03
7217.03
7217.04
7217.11
7218.03
7218.04
7218.05
7218.09
Part Number Index
Page
30
31
32
33
503
504
29
34
35
36
37
38
39
350
351
352
353
354
348
349
259
260
261
262
263
264
265
266
237
238
239
240
319
499
501
500
502
492
493
494
495
496
497
506
507
328
332
331
330
338
339
343
344
Part Number
7218.13
7218.14
7218.15
7218.19
7225.04
7226.03
7226.04
7227.04
7227.14
7228.03
7228.04
7228.06
7228.08
7230.04
7231.04
7231.06
7232.04
7232.07
7233.04
7233.06
7233.08
7255.03
7255.04
7256.00
7263.01
7263.04
7270.02
7271.02
7271.03
7272.02
7273.02
7273.03
7281.02
7281.04
7282.03
7329.00B
7329.06B
7330.00B
7330.02B
7330.04B
7330.06B
7331.00B
7331.02B
7331.04B
7331.06B
7332.00B
7332.02B
7332.06B
7333.00B
7333.02B
7333.06B
7334.00B
7334.02B
Page
340
341
345
346
357
358
359
364
363
366
367
368
369
371
372
373
374
375
376
377
378
335
342
519
333
334
356
360
361
365
370
362
336
337
329
380
381
382
383
384
385
386
387
388
389
402
399
400
397
396
398
403
401
526
Part Number
7334.06B
7336.00
7336.10
7390.00B
7454.00A
7456.00A
7458.00A
7471.00
7472.00
7473.00
7476.06
7477.00
7477.02
7477.06
7478.00
7478.02
7478.06
7481.00
7482.00
7483.00
7486.00
7486.02
7486.06
7487.00
7488.00
7488.02
7700.00
7700.06
7701.00
7701.02
7701.06
7701.1ST.0000.01
7720.00
7721.00
7721.02
7721.06
7721.10
7721.40
7722.00
7735.00A
7740.00A
7745.00A
7750.00
7750.0S0.0000.00
7750.1ST.0000.00
7750.90
7750.OST.0002.00
7752.00
7752.0S0.0000.00
7752.90
7752.OST.0002.00
7755.00
7755.0S0.0000.00
Page
404
514
513
326
521
520
522
268
272
276
267
269
270
273
271
274
275
277
282
285
278
279
280
281
283
284
254
241
247
242
243
250
253
248
244
245
246
249
251
252
255
256
309
310
308
311
470
313
314
312
469
315
317
Part Number Index
POWERWAVE
Part Number
7755.90
7755.OST.0002.00
7760.00
7760.02
7760.03
7760.06
7762.00
7765.00
7766.00
7770.00A
7772.00A
7775.00A
7780.00
7782.00
7785.00
7824.00
7840.00
7850.00B
7999.00
8110.10
8110.40
8210.40
8211.10
8211.40
8212.10
8212.10
8212.40
8220.10
8220.40
8230.10
8230.40
8510.10
8510.40
8720.0ST.B400.00
8721.0ST.B400.00
8722.0ST.B400.00
8760.0ST.B100.00
8760.0ST.B400.00
8763.0ST.0000.00
8763.0ST.B100.00
8763.0ST.B400.00
8780.0ST.0000.00
8780.0ST.B100.00
8780.0ST.B100.02
8780.0ST.B100.04
8780.0ST.B400.00
8780.0ST.B400.02
8780.0ST.B400.04
8782.0ST.0000.00
8782.0ST.B100.00
8782.0ST.B100.02
8782.0ST.B100.04
8782.0ST.B400.00
Part Number Index
Page
316
468
301
300
302
303
305
304
306
391
392
393
320
321
322
298
395
405
511
476
474
475
479
480
477
481
478
484
483
487
486
489
490
449
450
451
456
457
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
Part Number
8782.0ST.B400.02
8782.0ST.B400.04
8785.0ST.0000.00
8785.0ST.B100.00
8785.0ST.B100.02
8785.0ST.B100.04
8785.0ST.B400.00
8785.0ST.B400.02
8785.0ST.B400.04
ALR0062/00109
ALR1200/00209
ALR1200/90209
ALR1212/00102
ALR1212/00209
ALR2200/00209
ALR2200/90209
ALR2212/00119
ALR2212/00129
ALR2222/00109
ALR3200/00
ALR3200/00109
ALR3200/01109
ALR3200/90109
ALR3200/91109
ALR3232/51109
ALR3242/03039
ALR3246/00309
ALR4200/00209
ALR4200/01109
ALR4200/01209
ALR4600/00109
ALR4600/00119
ALR4600/00209
ALR6200/00109
ALR6212/90129
ALR6212/90139
ALS6200/00
ALT1200/00209
AM1200/05309
AR0027/50409
AR0065/00109
AR1200/05309
AR1200/95209
AR1700/80
AR1700/90209
AR1700/90409
AR1700/90419
AR1717/90609
AR2200/00109
AR2212/05209
AR2700/50209
AR2700/50409
AR2727/50609
527
Page
439
440
441
442
443
444
445
446
447
116
118
117
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
145
143
146
91
92
147
148
93
96
95
94
97
149
150
98
99
100
Part Number
AR3400/01109
AR3400/91109
AR3434/51109
AR3700/50409
AR4200/01209
AR4600/05309
AR4640/05309
AR6500/00109
AR6512/00229
AR6512/00239
AR6517/01429
AR6517/01429
AR6517/01439
AR6517/01459
AR6522/01100
AR6522/01109
AR6522/91100
AR6560/00209
ATR1200/001xy (GSM 900)
ATR1200/002xy (GSM 900)
ATR1200/901xy (EGSM 900)
ATR1200/902xy (EGSM 900)
CEV-000-000-001
CM1000-AMPS-xxx
CM1001-EGSM-xxx
CM1005-DBPXBC
CM1006-TBPXBC
CM1007-DBPXBC-xxx
CW0-000-000-003
G3L-1829-120
G3L-1929-160
G3L-2129-140
G3L-850-160
G3L-929-135
LGP121nn
LGP138nn
LGP141nn
LGP145nn
LGP146nn
LGP174nn
LGP175nn
LGP18104
LGP18520, LGP18521
LGP185nn
LGP186nn
LGP192nn
LGP195nn
LGP213nn
LGP215nn
LGP219nn
LGP233nn
LNKA800
LNKA900
Page
151
152
153
101
154
155
156
102
104
103
105
107
106
108
109
110
111
112
158
159
160
161
82
64
65
67
68
66
80
9
10
11
7
8
56
61
71
69
70
41
42
57
43
44
45
40
72
59
46
73
60
171
174
Part Number Index
POWERWAVE
Part Number
LNKC1800
LNKC1900
LNKF100
LNKF400
LNKF800
MF0-004-000-002
MF0-048-000-001
NP50B0-22111
NP5O-11111
NPBO-11111
NWV-001
OS-0851-P0-XXX
OS-0921-V0-XXX
OS-0951-P0-XXX
OS-1821-H0-XXX
OS-1851-H0-XXX
OS-1921-H0-XXX
OS-1933-E0-XXX
OS-1951-E0-XXX
OS-1991-H0-XXX
OS-2133-E0-XXX
OS-2151-E0-XXX
P65-15-XDHW2-ND1
P65-15-XL-2
P65-15-XL-4
P65-15-XL-R
P65-15-XLH-RR
P65-16-XL-2
P65-16-XL-4
P65-16-XL-6
P65-16-XL-R
P65-16-XLH-RR
P65-17-XDHW2-ND1
P65-17-XL-2
P65-17-XL-4
P65-17-XL-R
P65-17-XLH-RR
P65-18-XDHW2-ND1
P65-18-XHW2-RR
P65-18-XXW2-R
P65-18-XXW2-R
P90-14-XL-R
P90-14-XLH-RR
P90-15-XL-R
P90-15-XLH-RR
P90-16-XL-R
P90-16-XLH-RR
P90-17-XXW2-R
P90-17-XXW2-R
RH004000/003
RH004002/001
RH100020/101
RH100020/211
Part Number Index
Page
175
173
176
172
177
77
78
163
164
165
525
13
19
14
20
15
21
23
16
24
25
17
467
290
291
409
416
292
293
294
410
417
466
295
296
411
418
465
459
453
461
412
419
413
420
414
421
454
462
184
189
190
191
Part Number
RH200020/101
RH200020/211
RH201022/101
RH201022/211
RH300020/101
RH300020/211
RH304022/03A
RH304022/101
RH304022/211
RH305022/03A
RH308022/03A
RH309022/101
RH309022/211
RH330020/101
RH334022/101
RH400020/101
RH400020/211
RH500020/101
RH500020/211
RH600020/101
RH600020/211
RH601022/101
RH601022/211
RH602022/101
RH602022/211
RH621010
RH700030/101
RH700030/101
RH705032/101
RH770020/101
RH805022/101
RH805022/211
RH900020/101
RH900020/211
SB400-A
SB400-B
Tap-In
TS07-AWDB111-001
TSAW-07BP111-001
TT08-19DB111-001
TT19-08BP111-001
TTAW-0000112-001
TTAW-07BP111-001
TTAW-60BW111-001
TU09-000001n-001
UA107 62/1
UA107 62/2
UA107 62/3
UA107 62/4
VersaFlex 7.0
VersaFlex 9.0
528
Page
192
193
194
195
196
197
222
198
199
223
224
200
201
202
203
204
205
206
207
208
209
210
211
212
213
185
182
214
215
216
217
218
219
220
168
169
180
51
47
52
53
49
48
50
54
227
228
229
230
84
85
P O W E R WAV E
Quality and Environmental
Management System
Certifications
ISO 9001
TL 9000
TickIT
ISO 14001
Contact Us
Sales by Region
Support by Region
Customer service offered 24 hours a day
U.S. & Canada
Customer Service
USSales@pwav.com
Latin America
SouthAmericaSales@pwav.com
Europe
EuropeSales@pwav.com
Middle East & Africa
MEASales@pwav.com
Asia-Pacific
APACSales@pwav.com
+1 888 PWR WAVE
(+1 888 797 9283)
Technical Support – Americas
Support@pwav.com
+1 888 PWR WAVE ext. 3
(+1 888 797 9283)
Technical Support – Asia-Pacific
TechSupportHK@pwav.com
Technical Support – Europe
TechSupport@pwav.com
+46 8 540 822 00
Worldwide Corporate Headquarters
1801 East St. Andrew Place
Santa Ana, CA 92705 USA
+1 714 466 1000
+1 714 466 5800 FAX
www.powerwave.com
About Powerwave Technologies
A global leader in end-to-end wireless coverage and capacity
solutions, Powerwave Technologies, Inc. offers cutting edge
wireless infrastructure to address the demands of enterprise
and commercial customers. Powerwave offers a comprehensive
suite of solutions, including Antennas, Base Station Solutions
and Coverage Solutions. Powerwave’s product line supports
all wireless network protocols and frequencies including Next
Generation Networks in 4G technology such as WiMAX™ and
LTE®. Powerwave solutions, products and services also help
wireless operators and OEMs reduce capital and operating
expenses, speed rollout of services, improve coverage
and capacity, and reduce environmental impact. For more
information, visit us at www.powerwave.com.
Worldwide Corporate Headquarters
1801 East St. Andrew Place
Santa Ana, CA 92705 USA
+1 714 466 1000
+1 714 466 5800 FAX
www.powerwave.com
D031-08643 Rev. D 02/11
© Copyright 2010, Powerwave Technologies, Inc. All rights reserved. Powerwave, Powerwave
Technologies, the Powerwave logo, Allgon, In-Hancer and Tap-In are registered trademarks
of Powerwave Technologies, Inc. Clean Site, Connecting the Wireless World, Intellimast,
InView Management System, LinkNet, MicroFlex, NetOne, NetWay, NetworkOne, Nexus,
Performance Boost, PowerBoost, RapidFlex, SubTerra and VersaFlex are trademarks of
Powerwave Technologies, Inc. LTE is a registered trademark of European Telecommunications
Standards Institute. Other trademarks referenced are the property of their respective owners.
All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.