Uploaded by evilpumpkin4

Grokking System Design Interview

advertisement
System Design Interviews: A step by step guide
A lot of software engineers struggle with system design interviews (SDIs) primarily because of three
reasons:
• The unstructured nature of SDIs, where they are asked to work on an open-ended design
problem that doesn’t have a standard answer.
• Their lack of experience in developing large scale systems.
• They did not prepare for SDIs.
Like coding interviews, candidates who haven’t put a conscious effort to prepare for SDIs, mostly
perform poorly especially at top companies like Google, Facebook, Amazon, Microsoft, etc. In these
companies, candidates who don’t perform above average, have a limited chance to get an offer. On the
other hand, a good performance always results in a better offer (higher position and salary), since it
shows the candidate’s ability to handle a complex system.
In this course, we’ll follow a step by step approach to solve multiple design problems. First, let’s go
through these steps:
Step 1: Requirements clarifications
It is always a good idea to ask questions about the exact scope of the problem we are solving. Design
questions are mostly open-ended, and they don’t have ONE correct answer, that’s why clarifying
ambiguities early in the interview becomes critical. Candidates who spend enough time to define the
end goals of the system always have a better chance to be successful in the interview. Also, since we
only have 35-40 minutes to design a (supposedly) large system, we should clarify what parts of the
system we will be focusing on.
Let’s expand this with an actual example of designing a Twitter-like service. Here are some questions
for designing Twitter that should be answered before moving on to the next steps:
•
•
•
•
•
•
•
Will users of our service be able to post tweets and follow other people?
Should we also design to create and display the user’s timeline?
Will tweets contain photos and videos?
Are we focusing on the backend only or are we developing the front-end too?
Will users be able to search tweets?
Do we need to display hot trending topics?
Will there be any push notification for new (or important) tweets?
All such question will determine how our end design will look like.
Step 2: System interface definition
Define what APIs are expected from the system. This will not only establish the exact contract expected
from the system, but will also ensure if we haven’t gotten any requirements wrong. Some examples for
our Twitter-like service will be:
postTweet(user_id, tweet_data, tweet_location, user_location, timestamp, …)
generateTimeline(user_id, current_time, user_location, …)
markTweetFavorite(user_id, tweet_id, timestamp, …)
Step 3: Back-of-the-envelope estimation
It is always a good idea to estimate the scale of the system we’re going to design. This will also help
later when we will be focusing on scaling, partitioning, load balancing and caching.
• What scale is expected from the system (e.g., number of new tweets, number of tweet views,
number of timeline generations per sec., etc.)?
• How much storage will we need? We will have different numbers if users can have photos and
videos in their tweets.
• What network bandwidth usage are we expecting? This will be crucial in deciding how we will
manage traffic and balance load between servers.
Step 4: Defining data model
Defining the data model early will clarify how data will flow among different components of the
system. Later, it will guide towards data partitioning and management. The candidate should be able to
identify various entities of the system, how they will interact with each other, and different aspect of
data management like storage, transportation, encryption, etc. Here are some entities for our Twitterlike service:
User: UserID, Name, Email, DoB, CreationData, LastLogin, etc.
Tweet: TweetID, Content, TweetLocation, NumberOfLikes, TimeStamp, etc.
UserFollowo: UserdID1, UserID2
FavoriteTweets: UserID, TweetID, TimeStamp
Which database system should we use? Will NoSQL like Cassandra best fit our needs, or should we use
a MySQL-like solution? What kind of block storage should we use to store photos and videos?
Step 5: High-level design
Draw a block diagram with 5-6 boxes representing the core components of our system. We should
identify enough components that are needed to solve the actual problem from end-to-end.
For Twitter, at a high-level, we will need multiple application servers to serve all the read/write
requests with load balancers in front of them for traffic distributions. If we’re assuming that we will
have a lot more read traffic (as compared to write), we can decide to have separate servers for handling
these scenarios. On the backend, we need an efficient database that can store all the tweets and can
support a huge number of reads. We will also need a distributed file storage system for storing photos
and videos.
Step 6: Detailed design
Dig deeper into two or three components; interviewer’s feedback should always guide us what parts of
the system need further discussion. We should be able to present different approaches, their pros and
cons, and explain why we will prefer one approach on the other. Remember there is no single answer,
the only important thing is to consider tradeoffs between different options while keeping system
constraints in mind.
• Since we will be storing a massive amount of data, how should we partition our data to
distribute it to multiple databases? Should we try to store all the data of a user on the same
database? What issue could it cause?
• How will we handle hot users who tweet a lot or follow lots of people?
• Since users’ timeline will contain the most recent (and relevant) tweets, should we try to store
our data in such a way that is optimized for scanning the latest tweets?
• How much and at which layer should we introduce cache to speed things up?
• What components need better load balancing?
Step 7: Identifying and resolving bottlenecks
Try to discuss as many bottlenecks as possible and different approaches to mitigate them.
• Is there any single point of failure in our system? What are we doing to mitigate it?
• Do we have enough replicas of the data so that if we lose a few servers we can still serve our
users?
• Similarly, do we have enough copies of different services running such that a few failures will
not cause total system shutdown?
• How are we monitoring the performance of our service? Do we get alerts whenever critical
components fail or their performance degrades?
Summary
In short, preparation and being organized during the interview are the keys to be successful in system
design interviews. The above-mentioned steps should guide you to remain on track and cover all the
different aspects while designing a system.
Let’s apply the above guidelines to design a few systems that are asked in SDIs.
Designing a URL Shortening service like
TinyURL
Let's design a URL shortening service like TinyURL. This service will provide short aliases redirecting
to long URLs. Similar services: bit.ly, goo.gl, qlink.me, etc. Difficulty Level: Easy
1. Why do we need URL shortening?
URL shortening is used to create shorter aliases for long URLs. We call these shortened aliases “short
links.” Users are redirected to the original URL when they hit these short links. Short links save a lot of
space when displayed, printed, messaged, or tweeted. Additionally, users are less likely to mistype
shorter URLs.
For example, if we shorten this page through TinyURL:
https://www.educative.io/collection/page/5668639101419520/5649050225344512/5668600
916475904/
We would get:
http://tinyurl.com/jlg8zpc
The shortened URL is nearly one-third the size of the actual URL.
URL shortening is used for optimizing links across devices, tracking individual links to analyze
audience and campaign performance, and hiding affiliated original URLs.
If you haven’t used tinyurl.com before, please try creating a new shortened URL and spend some time
going through the various options their service offers. This will help you a lot in understanding this
chapter.
2. Requirements and Goals of the System
�
You should always clarify requirements at the beginning of the interview. Be sure to ask
questions to find the exact scope of the system that the interviewer has in mind.
Our URL shortening system should meet the following requirements:
Functional Requirements:
1. Given a URL, our service should generate a shorter and unique alias of it. This is called a short
link.
2. When users access a short link, our service should redirect them to the original link.
3. Users should optionally be able to pick a custom short link for their URL.
4. Links will expire after a standard default timespan. Users should be able to specify the
expiration time.
Non-Functional Requirements:
1. The system should be highly available. This is required because, if our service is down, all the
URL redirections will start failing.
2. URL redirection should happen in real-time with minimal latency.
3. Shortened links should not be guessable (not predictable).
Extended Requirements:
1. Analytics; e.g., how many times a redirection happened?
2. Our service should also be accessible through REST APIs by other services.
3. Capacity Estimation and Constraints
Our system will be read-heavy. There will be lots of redirection requests compared to new URL
shortenings. Let’s assume 100:1 ratio between read and write.
Traffic estimates: Assuming, we will have 500M new URL shortenings per month, with 100:1
read/write ratio, we can expect 50B redirections during the same period:
100 * 500M => 50B
What would be Queries Per Second (QPS) for our system? New URLs shortenings per second:
500 million / (30 days * 24 hours * 3600 seconds) = ~200 URLs/s
Considering 100:1 read/write ratio, URLs redirections per second will be:
100 * 200 URLs/s = 20K/s
Storage estimates: Let’s assume we store every URL shortening request (and associated shortened
link) for 5 years. Since we expect to have 500M new URLs every month, the total number of objects
we expect to store will be 30 billion:
500 million * 5 years * 12 months = 30 billion
Let’s assume that each stored object will be approximately 500 bytes (just a ballpark estimate–we will
dig into it later). We will need 15TB of total storage:
30 billion * 500 bytes = 15 TB
Bandwidth estimates: For write requests, since we expect 200 new URLs every second, total
incoming data for our service will be 100KB per second:
200 * 500 bytes = 100 KB/s
For read requests, since every second we expect ~20K URLs redirections, total outgoing data for our
service would be 10MB per second:
20K * 500 bytes = ~10 MB/s
Memory estimates: If we want to cache some of the hot URLs that are frequently accessed, how much
memory will we need to store them? If we follow the 80-20 rule, meaning 20% of URLs generate 80%
of traffic, we would like to cache these 20% hot URLs.
Since we have 20K requests per second, we will be getting 1.7 billion requests per day:
20K * 3600 seconds * 24 hours = ~1.7 billion
To cache 20% of these requests, we will need 170GB of memory.
0.2 * 1.7 billion * 500 bytes = ~170GB
One thing to note here is that since there will be a lot of duplicate requests (of the same URL),
therefore, our actual memory usage will be less than 170GB.
High level estimates: Assuming 500 million new URLs per month and 100:1 read:write ratio,
following is the summary of the high level estimates for our service:
New URLs
URL redirections
Incoming data
Outgoing data
Storage for 5 years
Memory for cache
200/s
20K/s
100KB/s
10MB/s
15TB
170GB
4. System APIs
�
Once we've finalized the requirements, it's always a good idea to define the system APIs. This
should explicitly state what is expected from the system.
We can have SOAP or REST APIs to expose the functionality of our service. Following could be the
definitions of the APIs for creating and deleting URLs:
createURL(api_dev_key, original_url, custom_alias=None, user_name=None,
expire_date=None)
Parameters:
api_dev_key (string): The API developer key of a registered account. This will be used to, among other
things, throttle users based on their allocated quota.
original_url (string): Original URL to be shortened.
custom_alias (string): Optional custom key for the URL.
user_name (string): Optional user name to be used in encoding.
expire_date (string): Optional expiration date for the shortened URL.
Returns: (string)
A successful insertion returns the shortened URL; otherwise, it returns an error code.
deleteURL(api_dev_key, url_key)
Where “url_key” is a string representing the shortened URL to be retrieved. A successful deletion
returns ‘URL Removed’.
How do we detect and prevent abuse? A malicious user can put us out of business by consuming all
URL keys in the current design. To prevent abuse, we can limit users via their api_dev_key. Each
api_dev_key can be limited to a certain number of URL creations and redirections per some time
period (which may be set to a different duration per developer key).
5. Database Design
�
Defining the DB schema in the early stages of the interview would help to understand the data
flow among various components and later would guide towards data partitioning.
A few observations about the nature of the data we will store:
1.
2.
3.
4.
We need to store billions of records.
Each object we store is small (less than 1K).
There are no relationships between records—other than storing which user created a URL.
Our service is read-heavy.
Database Schema:
We would need two tables: one for storing information about the URL mappings, and one for the user’s
data who created the short link.
URL
PK
<span>Hash:
varchar(16)</span>
User
PK
<span>UserID:
int</span>
<span>OriginalURL: varchar(512)</span>
<span>Name: varchar(20)</span>
<span>CreationDate: datetime</span> <span>Email: varchar(32)</span>
<span>ExpirationDate: datatime</span>
[Not supported by viewer]
CreationDate: datetime<br>
<span>LastLogin: datatime</span>
What kind of database should we use? Since we anticipate storing billions of rows, and we don’t
need to use relationships between objects – a NoSQL key-value store like DynamoDB, Cassandra or
Riak is a better choice. A NoSQL choice would also be easier to scale. Please see SQL vs NoSQL for
more details.
6. Basic System Design and Algorithm
The problem we are solving here is, how to generate a short and unique key for a given URL.
In the TinyURL example in Section 1, the shortened URL is “http://tinyurl.com/jlg8zpc”. The last six
characters of this URL is the short key we want to generate. We’ll explore two solutions here:
a. Encoding actual URL
We can compute a unique hash (e.g., MD5 or SHA256, etc.) of the given URL. The hash can then be
encoded for displaying. This encoding could be base36 ([a-z ,0-9]) or base62 ([A-Z, a-z, 0-9]) and if
we add ‘-’ and ‘.’ we can use base64 encoding. A reasonable question would be, what should be the
length of the short key? 6, 8 or 10 characters.
Using base64 encoding, a 6 letter long key would result in 64^6 = ~68.7 billion possible strings
Using base64 encoding, an 8 letter long key would result in 64^8 = ~281 trillion possible strings
With 68.7B unique strings, let’s assume six letter keys would suffice for our system.
If we use the MD5 algorithm as our hash function, it’ll produce a 128-bit hash value. After base64
encoding, we’ll get a string having more than 21 characters (since each base64 character encodes 6 bits
of the hash value). Since we only have space for 8 characters per short key, how will we choose our key
then? We can take the first 6 (or 8) letters for the key. This could result in key duplication though, upon
which we can choose some other characters out of the encoding string or swap some characters.
What are different issues with our solution? We have the following couple of problems with our
encoding scheme:
1. If multiple users enter the same URL, they can get the same shortened URL, which is not
acceptable.
2. What if parts of the URL are URL-encoded? e.g., http://www.educative.io/distributed.php?
id=design, and http://www.educative.io/distributed.php%3Fid%3Ddesign are identical except
for the URL encoding.
Workaround for the issues: We can append an increasing sequence number to each input URL to
make it unique, and then generate a hash of it. We don’t need to store this sequence number in the
databases, though. Possible problems with this approach could be an ever-increasing sequence number.
Can it overflow? Appending an increasing sequence number will also impact the performance of the
service.
Another solution could be to append user id (which should be unique) to the input URL. However, if
the user has not signed in, we would have to ask the user to choose a uniqueness key. Even after this, if
we have a conflict, we have to keep generating a key until we get a unique one.
Request flow for shortening of a URL
1 of 9
b. Generating keys offline
We can have a standalone Key Generation Service (KGS) that generates random six letter strings
beforehand and stores them in a database (let’s call it key-DB). Whenever we want to shorten a URL,
we will just take one of the already-generated keys and use it. This approach will make things quite
simple and fast. Not only are we not encoding the URL, but we won’t have to worry about duplications
or collisions. KGS will make sure all the keys inserted into key-DB are unique
Can concurrency cause problems? As soon as a key is used, it should be marked in the database to
ensure it doesn’t get used again. If there are multiple servers reading keys concurrently, we might get a
scenario where two or more servers try to read the same key from the database. How can we solve this
concurrency problem?
Servers can use KGS to read/mark keys in the database. KGS can use two tables to store keys: one for
keys that are not used yet, and one for all the used keys. As soon as KGS gives keys to one of the
servers, it can move them to the used keys table. KGS can always keep some keys in memory so that it
can quickly provide them whenever a server needs them.
For simplicity, as soon as KGS loads some keys in memory, it can move them to the used keys table.
This ensures each server gets unique keys. If KGS dies before assigning all the loaded keys to some
server, we will be wasting those keys–which is acceptable, given the huge number of keys we have.
KGS also has to make sure not to give the same key to multiple servers. For that, it must synchronize
(or get a lock on) the data structure holding the keys before removing keys from it and giving them to a
server
What would be the key-DB size? With base64 encoding, we can generate 68.7B unique six letters
keys. If we need one byte to store one alpha-numeric character, we can store all these keys in:
6 (characters per key) * 68.7B (unique keys) = 412 GB.
Isn’t KGS a single point of failure? Yes, it is. To solve this, we can have a standby replica of KGS.
Whenever the primary server dies, the standby server can take over to generate and provide keys.
Can each app server cache some keys from key-DB? Yes, this can surely speed things up. Although
in this case, if the application server dies before consuming all the keys, we will end up losing those
keys. This can be acceptable since we have 68B unique six letter keys.
How would we perform a key lookup? We can look up the key in our database or key-value store to
get the full URL. If it’s present, issue an “HTTP 302 Redirect” status back to the browser, passing the
stored URL in the “Location” field of the request. If that key is not present in our system, issue an
“HTTP 404 Not Found” status or redirect the user back to the homepage.
Should we impose size limits on custom aliases? Our service supports custom aliases. Users can pick
any ‘key’ they like, but providing a custom alias is not mandatory. However, it is reasonable (and often
desirable) to impose a size limit on a custom alias to ensure we have a consistent URL database. Let’s
assume users can specify a maximum of 16 characters per customer key (as reflected in the above
database schema).
High level system design for URL shortening
7. Data Partitioning and Replication
To scale out our DB, we need to partition it so that it can store information about billions of URLs. We
need to come up with a partitioning scheme that would divide and store our data to different DB
servers.
a. Range Based Partitioning: We can store URLs in separate partitions based on the first letter of the
URL or the hash key. Hence we save all the URLs starting with letter ‘A’ in one partition, save those
that start with letter ‘B’ in another partition and so on. This approach is called range-based partitioning.
We can even combine certain less frequently occurring letters into one database partition. We should
come up with a static partitioning scheme so that we can always store/find a file in a predictable
manner.
The main problem with this approach is that it can lead to unbalanced servers. For example: we decide
to put all URLs starting with letter ‘E’ into a DB partition, but later we realize that we have too many
URLs that start with letter ‘E’.
b. Hash-Based Partitioning: In this scheme, we take a hash of the object we are storing. We then
calculate which partition to use based upon the hash. In our case, we can take the hash of the ‘key’ or
the actual URL to determine the partition in which we store the data object.
Our hashing function will randomly distribute URLs into different partitions (e.g., our hashing function
can always map any key to a number between [1…256]), and this number would represent the partition
in which we store our object.
This approach can still lead to overloaded partitions, which can be solved by using Consistent Hashing.
8. Cache
We can cache URLs that are frequently accessed. We can use some off-the-shelf solution like
Memcache, which can store full URLs with their respective hashes. The application servers, before
hitting backend storage, can quickly check if the cache has the desired URL.
How much cache should we have? We can start with 20% of daily traffic and, based on clients’ usage
pattern, we can adjust how many cache servers we need. As estimated above, we need 170GB memory
to cache 20% of daily traffic. Since a modern-day server can have 256GB memory, we can easily fit all
the cache into one machine. Alternatively, we can use a couple of smaller servers to store all these hot
URLs.
Which cache eviction policy would best fit our needs? When the cache is full, and we want to
replace a link with a newer/hotter URL, how would we choose? Least Recently Used (LRU) can be a
reasonable policy for our system. Under this policy, we discard the least recently used URL first. We
can use a Linked Hash Map or a similar data structure to store our URLs and Hashes, which will also
keep track of the URLs that have been accessed recently.
To further increase the efficiency, we can replicate our caching servers to distribute load between them.
How can each cache replica be updated? Whenever there is a cache miss, our servers would be
hitting a backend database. Whenever this happens, we can update the cache and pass the new entry to
all the cache replicas. Each replica can update their cache by adding the new entry. If a replica already
has that entry, it can simply ignore it.
Request flow for accessing a shortened URL
1 of 11
9. Load Balancer (LB)
We can add a Load balancing layer at three places in our system:
1. Between Clients and Application servers
2. Between Application Servers and database servers
3. Between Application Servers and Cache servers
Initially, we could use a simple Round Robin approach that distributes incoming requests equally
among backend servers. This LB is simple to implement and does not introduce any overhead. Another
benefit of this approach is that if a server is dead, LB will take it out of the rotation and will stop
sending any traffic to it.
A problem with Round Robin LB is that server load is not taken into consideration. If a server is
overloaded or slow, the LB will not stop sending new requests to that server. To handle this, a more
intelligent LB solution can be placed that periodically queries the backend server about its load and
adjusts traffic based on that.
10. Purging or DB cleanup
Should entries stick around forever or should they be purged? If a user-specified expiration time is
reached, what should happen to the link?
If we chose to actively search for expired links to remove them, it would put a lot of pressure on our
database. Instead, we can slowly remove expired links and do a lazy cleanup. Our service will make
sure that only expired links will be deleted, although some expired links can live longer but will never
be returned to users.
• Whenever a user tries to access an expired link, we can delete the link and return an error to the
user.
• A separate Cleanup service can run periodically to remove expired links from our storage and
cache. This service should be very lightweight and can be scheduled to run only when the user
traffic is expected to be low.
• We can have a default expiration time for each link (e.g., two years).
• After removing an expired link, we can put the key back in the key-DB to be reused.
• Should we remove links that haven’t been visited in some length of time, say six months? This
could be tricky. Since storage is getting cheap, we can decide to keep links forever.
Detailed component design for URL shortening
11. Telemetry
How many times a short URL has been used, what were user locations, etc.? How would we store these
statistics? If it is part of a DB row that gets updated on each view, what will happen when a popular
URL is slammed with a large number of concurrent requests?
Some statistics worth tracking: country of the visitor, date and time of access, web page that refers the
click, browser, or platform from where the page was accessed.
12. Security and Permissions
Can users create private URLs or allow a particular set of users to access a URL?
We can store permission level (public/private) with each URL in the database. We can also create a
separate table to store UserIDs that have permission to see a specific URL. If a user does not have
permission and tries to access a URL, we can send an error (HTTP 401) back. Given that we are storing
our data in a NoSQL wide-column database like Cassandra, the key for the table storing permissions
would be the ‘Hash’ (or the KGS generated ‘key’). The columns will store the UserIDs of those users
that have permissions to see the URL.
Designing Pastebin
Let's design a Pastebin like web service, where users can store plain text. Users of the service will enter
a piece of text and get a randomly generated URL to access it. Similar Services: pastebin.com,
pasted.co, chopapp.com Difficulty Level: Easy
1. What is Pastebin?
Pastebin like services enable users to store plain text or images over the network (typically the Internet)
and generate unique URLs to access the uploaded data. Such services are also used to share data over
the network quickly, as users would just need to pass the URL to let other users see it.
If you haven’t used pastebin.com before, please try creating a new ‘Paste’ there and spend some time
going through the different options their service offers. This will help you a lot in understanding this
chapter.
2. Requirements and Goals of the System
Our Pastebin service should meet the following requirements:
Functional Requirements:
1. Users should be able to upload or “paste” their data and get a unique URL to access it.
2. Users will only be able to upload text.
3. Data and links will expire after a specific timespan automatically; users should also be able to
specify expiration time.
4. Users should optionally be able to pick a custom alias for their paste.
Non-Functional Requirements:
1. The system should be highly reliable, any data uploaded should not be lost.
2. The system should be highly available. This is required because if our service is down, users
will not be able to access their Pastes.
3. Users should be able to access their Pastes in real-time with minimum latency.
4. Paste links should not be guessable (not predictable).
Extended Requirements:
1. Analytics, e.g., how many times a paste was accessed?
2. Our service should also be accessible through REST APIs by other services.
3. Some Design Considerations
Pastebin shares some requirements with URL Shortening service, but there are some additional design
considerations we should keep in mind.
What should be the limit on the amount of text user can paste at a time? We can limit users not to
have Pastes bigger than 10MB to stop the abuse of the service.
Should we impose size limits on custom URLs? Since our service supports custom URLs, users can
pick any URL that they like, but providing a custom URL is not mandatory. However, it is reasonable
(and often desirable) to impose a size limit on custom URLs, so that we have a consistent URL
database.
4. Capacity Estimation and Constraints
Our services will be read-heavy; there will be more read requests compared to new Pastes creation. We
can assume a 5:1 ratio between read and write.
Traffic estimates: Pastebin services are not expected to have traffic similar to Twitter or Facebook,
let’s assume here that we get one million new pastes added to our system every day. This leaves us with
five million reads per day.
New Pastes per second:
1M / (24 hours * 3600 seconds) ~= 12 pastes/sec
Paste reads per second:
5M / (24 hours * 3600 seconds) ~= 58 reads/sec
Storage estimates: Users can upload maximum 10MB of data; commonly Pastebin like services are
used to share source code, configs or logs. Such texts are not huge, so let’s assume that each paste on
average contains 10KB.
At this rate, we will be storing 10GB of data per day.
1M * 10KB => 10 GB/day
If we want to store this data for ten years we would need the total storage capacity of 36TB.
With 1M pastes every day we will have 3.6 billion Pastes in 10 years. We need to generate and store
keys to uniquely identify these pastes. If we use base64 encoding ([A-Z, a-z, 0-9, ., -]) we would need
six letters strings:
64^6 ~= 68.7 billion unique strings
If it takes one byte to store one character, total size required to store 3.6B keys would be:
3.6B * 6 => 22 GB
22GB is negligible compared to 36TB. To keep some margin, we will assume a 70% capacity model
(meaning we don’t want to use more than 70% of our total storage capacity at any point), which raises
our storage needs to 51.4TB.
Bandwidth estimates: For write requests, we expect 12 new pastes per second, resulting in 120KB of
ingress per second.
12 * 10KB => 120 KB/s
As for the read request, we expect 58 requests per second. Therefore, total data egress (sent to users)
will be 0.6 MB/s.
58 * 10KB => 0.6 MB/s
Although total ingress and egress are not big, we should keep these numbers in mind while designing
our service.
Memory estimates: We can cache some of the hot pastes that are frequently accessed. Following the
80-20 rule, meaning 20% of hot pastes generate 80% of traffic, we would like to cache these 20%
pastes
Since we have 5M read requests per day, to cache 20% of these requests, we would need:
0.2 * 5M * 10KB ~= 10 GB
5. System APIs
We can have SOAP or REST APIs to expose the functionality of our service. Following could be the
definitions of the APIs to create/retrieve/delete Pastes:
addPaste(api_dev_key, paste_data, custom_url=None user_name=None, paste_name=None,
expire_date=None)
Parameters:
api_dev_key (string): The API developer key of a registered account. This will be used to, among other
things, throttle users based on their allocated quota.
paste_data (string): Textual data of the paste.
custom_url (string): Optional custom URL.
user_name (string): Optional user name to be used to generate URL.
paste_name (string): Optional name of the paste
expire_date (string): Optional expiration date for the paste.
Returns: (string)
A successful insertion returns the URL through which the paste can be accessed, otherwise, it will
return an error code.
Similarly, we can have retrieve and delete Paste APIs:
getPaste(api_dev_key, api_paste_key)
Where “api_paste_key” is a string representing the Paste Key of the paste to be retrieved. This API will
return the textual data of the paste.
deletePaste(api_dev_key, api_paste_key)
A successful deletion returns ‘true’, otherwise returns ‘false’.
6. Database Design
A few observations about the nature of the data we are storing:
1.
2.
3.
4.
We need to store billions of records.
Each metadata object we are storing would be small (less than 100 bytes).
Each paste object we are storing can be of medium size (it can be a few MB).
There are no relationships between records, except if we want to store which user created what
Paste.
5. Our service is read-heavy.
Database Schema:
We would need two tables, one for storing information about the Pastes and the other for users’ data.
Paste
User
PK
PK
<span>URLHash:
varchar(16)</span> <span>UserID:
int</span>
<span>ContentKey: varchar(512)</span><span>Name: varchar(20)</span>
<span>ExpirationDate: datatime</span><span>Email: varchar(32)</span>
[Not supported by viewer]
CreationDate: datetime<br>
<span>CreationDate: datetime</span> <span>LastLogin: datatime</span>
Here, ‘URlHash’ is the URL equivalent of the TinyURL and ‘ContentKey’ is the object key storing the
contents of the paste.
7. High Level Design
At a high level, we need an application layer that will serve all the read and write requests. Application
layer will talk to a storage layer to store and retrieve data. We can segregate our storage layer with one
database storing metadata related to each paste, users, etc., while the other storing the paste contents in
some object storage (like Amazon S3). This division of data will also allow us to scale them
individually.
Application server
Client
Metadata storage
Object storage
8. Component Design
a. Application layer
Our application layer will process all incoming and outgoing requests. The application servers will be
talking to the backend data store components to serve the requests.
How to handle a write request? Upon receiving a write request, our application server will generate a
six-letter random string, which would serve as the key of the paste (if the user has not provided a
custom key). The application server will then store the contents of the paste and the generated key in
the database. After the successful insertion, the server can return the key to the user. One possible
problem here could be that the insertion fails because of a duplicate key. Since we are generating a
random key, there is a possibility that the newly generated key could match an existing one. In that
case, we should regenerate a new key and try again. We should keep retrying until we don’t see failure
due to the duplicate key. We should return an error to the user if the custom key they have provided is
already present in our database.
Another solution of the above problem could be to run a standalone Key Generation Service (KGS)
that generates random six letters strings beforehand and stores them in a database (let’s call it key-DB).
Whenever we want to store a new paste, we will just take one of the already generated keys and use it.
This approach will make things quite simple and fast since we will not be worrying about duplications
or collisions. KGS will make sure all the keys inserted in key-DB are unique. KGS can use two tables
to store keys, one for keys that are not used yet and one for all the used keys. As soon as KGS gives
some keys to an application server, it can move these to the used keys table. KGS can always keep
some keys in memory so that whenever a server needs them, it can quickly provide them. As soon as
KGS loads some keys in memory, it can move them to the used keys table, this way we can make sure
each server gets unique keys. If KGS dies before using all the keys loaded in memory, we will be
wasting those keys. We can ignore these keys given that we have a huge number of them.
Isn’t KGS a single point of failure? Yes, it is. To solve this, we can have a standby replica of KGS
and whenever the primary server dies it can take over to generate and provide keys.
Can each app server cache some keys from key-DB? Yes, this can surely speed things up. Although
in this case, if the application server dies before consuming all the keys, we will end up losing those
keys. This could be acceptable since we have 68B unique six letters keys, which are a lot more than we
require.
How does it handle a paste read request? Upon receiving a read paste request, the application service
layer contacts the datastore. The datastore searches for the key, and if it is found, returns the paste’s
contents. Otherwise, an error code is returned.
b. Datastore layer
We can divide our datastore layer into two:
1. Metadata database: We can use a relational database like MySQL or a Distributed Key-Value
store like Dynamo or Cassandra.
2. Object storage: We can store our contents in an Object Storage like Amazon’s S3. Whenever we
feel like hitting our full capacity on content storage, we can easily increase it by adding more
servers.
Detailed component design for Pastebin
9. Purging or DB Cleanup
Please see Designing a URL Shortening service.
10. Data Partitioning and Replication
Please see Designing a URL Shortening service.
11. Cache and Load Balancer
Please see Designing a URL Shortening service.
12. Security and Permissions
Please see Designing a URL Shortening service.
Designing Instagram
Let's design a photo-sharing service like Instagram, where users can upload photos to share them with
other users. Similar Services: Flickr, Picasa Difficulty Level: Medium
1. What is Instagram?
Instagram is a social networking service which enables its users to upload and share their photos and
videos with other users. Instagram users can choose to share information either publicly or privately.
Anything shared publicly can be seen by any other user, whereas privately shared content can only be
accessed by a specified set of people. Instagram also enables its users to share through many other
social networking platforms, such as Facebook, Twitter, Flickr, and Tumblr.
For the sake of this exercise, we plan to design a simpler version of Instagram, where a user can share
photos and can also follow other users. The ‘News Feed’ for each user will consist of top photos of all
the people the user follows.
2. Requirements and Goals of the System
We’ll focus on the following set of requirements while designing the Instagram:
Functional Requirements
1.
2.
3.
4.
Users should be able to upload/download/view photos.
Users can perform searches based on photo/video titles.
Users can follow other users.
The system should be able to generate and display a user’s News Feed consisting of top photos
from all the people the user follows.
Non-functional Requirements
1. Our service needs to be highly available.
2. The acceptable latency of the system is 200ms for News Feed generation.
3. Consistency can take a hit (in the interest of availability), if a user doesn’t see a photo for a
while; it should be fine.
4. The system should be highly reliable; any uploaded photo or video should never be lost.
Not in scope: Adding tags to photos, searching photos on tags, commenting on photos, tagging users to
photos, who to follow, etc.
3. Some Design Considerations
The system would be read-heavy, so we will focus on building a system that can retrieve photos
quickly.
1. Practically, users can upload as many photos as they like. Efficient management of storage
should be a crucial factor while designing this system.
2. Low latency is expected while viewing photos.
3. Data should be 100% reliable. If a user uploads a photo, the system will guarantee that it will
never be lost.
4. Capacity Estimation and Constraints
•
•
•
•
Let’s assume we have 500M total users, with 1M daily active users.
2M new photos every day, 23 new photos every second.
Average photo file size => 200KB
Total space required for 1 day of photos
2M * 200KB => 400 GB
• Total space required for 10 years:
400GB * 365 (days a year) * 10 (years) ~= 1425TB
5. High Level System Design
At a high-level, we need to support two scenarios, one to upload photos and the other to view/search
photos. Our service would need some object storage servers to store photos and also some database
servers to store metadata information about the photos.
6. Database Schema
�
Defining the DB schema in the early stages of the interview would help to understand the data
flow among various components and later would guide towards data partitioning.
We need to store data about users, their uploaded photos, and people they follow. Photo table will store
all data related to a photo; we need to have an index on (PhotoID, CreationDate) since we need to fetch
recent photos first.
A straightforward approach for storing the above schema would be to use an RDBMS like MySQL
since we require joins. But relational databases come with their challenges, especially when we need to
scale them. For details, please take a look at SQL vs. NoSQL.
We can store photos in a distributed file storage like HDFS or S3.
We can store the above schema in a distributed key-value store to enjoy the benefits offered by NoSQL.
All the metadata related to photos can go to a table where the ‘key’ would be the ‘PhotoID’ and the
‘value’ would be an object containing PhotoLocation, UserLocation, CreationTimestamp, etc.
We need to store relationships between users and photos, to know who owns which photo. We also
need to store the list of people a user follows. For both of these tables, we can use a wide-column
datastore like Cassandra. For the ‘UserPhoto’ table, the ‘key’ would be ‘UserID’ and the ‘value’ would
be the list of ‘PhotoIDs’ the user owns, stored in different columns. We will have a similar scheme for
the ‘UserFollow’ table.
Cassandra or key-value stores in general, always maintain a certain number of replicas to offer
reliability. Also, in such data stores, deletes don’t get applied instantly, data is retained for certain days
(to support undeleting) before getting removed from the system permanently.
7. Data Size Estimation
Let’s estimate how much data will be going into each table and how much total storage we will need
for 10 years.
User: Assuming each “int” and “dateTime” is four bytes, each row in the User’s table will be of 68
bytes:
UserID (4 bytes) + Name (20 bytes) + Email (32 bytes) + DateOfBirth (4 bytes) + CreationDate (4
bytes) + LastLogin (4 bytes) = 68 bytes
If we have 500 million users, we will need 32GB of total storage.
500 million * 68 ~= 32GB
Photo: Each row in Photo’s table will be of 284 bytes:
PhotoID (4 bytes) + UserID (4 bytes) + PhotoPath (256 bytes) + PhotoLatitude (4 bytes) +
PhotLongitude(4 bytes) + UserLatitude (4 bytes) + UserLongitude (4 bytes) + CreationDate (4 bytes) =
284 bytes
If 2M new photos get uploaded every day, we will need 0.5GB of storage for one day:
2M * 284 bytes ~= 0.5GB per day
For 10 years we will need 1.88TB of storage.
UserFollow: Each row in the UserFollow table will consist of 8 bytes. If we have 500 million users
and on average each user follows 500 users. We would need 1.82TB of storage for the UserFollow
table:
500 million users * 500 followers * 8 bytes ~= 1.82TB
Total space required for all tables for 10 years will be 3.7TB:
32GB + 1.88TB + 1.82TB ~= 3.7TB
8. Component Design
Photo uploads (or writes) can be slow as they have to go to the disk, whereas reads will be faster,
especially if they are being served from cache.
Uploading users can consume all the available connections, as uploading is a slow process. This means
that ‘reads’ cannot be served if the system gets busy with all the write requests. We should keep in mind
that web servers have a connection limit before designing our system. If we assume that a web server
can have a maximum of 500 connections at any time, then it can’t have more than 500 concurrent
uploads or reads. To handle this bottleneck we can split reads and writes into separate services. We will
have dedicated servers for reads and different servers for writes to ensure that uploads don’t hog the
system.
Separating photos’ read and write requests will also allow us to scale and optimize each of these
operations independently.
9. Reliability and Redundancy
Losing files is not an option for our service. Therefore, we will store multiple copies of each file so that
if one storage server dies we can retrieve the photo from the other copy present on a different storage
server.
This same principle also applies to other components of the system. If we want to have high availability
of the system, we need to have multiple replicas of services running in the system, so that if a few
services die down the system still remains available and running. Redundancy removes the single point
of failure in the system.
If only one instance of a service is required to run at any point, we can run a redundant secondary copy
of the service that is not serving any traffic, but it can take control after the failover when primary has a
problem.
Creating redundancy in a system can remove single points of failure and provide a backup or spare
functionality if needed in a crisis. For example, if there are two instances of the same service running in
production and one fails or degrades, the system can failover to the healthy copy. Failover can happen
automatically or require manual intervention.
10. Data Sharding
Let’s discuss different schemes for metadata sharding:
a. Partitioning based on UserID Let’s assume we shard based on the ‘UserID’ so that we can keep all
photos of a user on the same shard. If one DB shard is 1TB, we will need four shards to store 3.7TB of
data. Let’s assume for better performance and scalability we keep 10 shards.
So we’ll find the shard number by UserID % 10 and then store the data there. To uniquely identify any
photo in our system, we can append shard number with each PhotoID.
How can we generate PhotoIDs? Each DB shard can have its own auto-increment sequence for
PhotoIDs and since we will append ShardID with each PhotoID, it will make it unique throughout our
system.
What are the different issues with this partitioning scheme?
1. How would we handle hot users? Several people follow such hot users and a lot of other people
see any photo they upload.
2. Some users will have a lot of photos compared to others, thus making a non-uniform
distribution of storage.
3. What if we cannot store all pictures of a user on one shard? If we distribute photos of a user
onto multiple shards will it cause higher latencies?
4. Storing all photos of a user on one shard can cause issues like unavailability of all of the user’s
data if that shard is down or higher latency if it is serving high load etc.
b. Partitioning based on PhotoID If we can generate unique PhotoIDs first and then find a shard
number through “PhotoID % 10”, the above problems will have been solved. We would not need to
append ShardID with PhotoID in this case as PhotoID will itself be unique throughout the system.
How can we generate PhotoIDs? Here we cannot have an auto-incrementing sequence in each shard
to define PhotoID because we need to know PhotoID first to find the shard where it will be stored. One
solution could be that we dedicate a separate database instance to generate auto-incrementing IDs. If
our PhotoID can fit into 64 bits, we can define a table containing only a 64 bit ID field. So whenever
we would like to add a photo in our system, we can insert a new row in this table and take that ID to be
our PhotoID of the new photo.
Wouldn’t this key generating DB be a single point of failure? Yes, it would be. A workaround for
that could be defining two such databases with one generating even numbered IDs and the other odd
numbered. For the MySQL, the following script can define such sequences:
KeyGeneratingServer1:
auto-increment-increment = 2
auto-increment-offset = 1
KeyGeneratingServer2:
auto-increment-increment = 2
auto-increment-offset = 2
We can put a load balancer in front of both of these databases to round robin between them and to deal
with downtime. Both these servers could be out of sync with one generating more keys than the other,
but this will not cause any issue in our system. We can extend this design by defining separate ID tables
for Users, Photo-Comments, or other objects present in our system.
Alternately, we can implement a ‘key’ generation scheme similar to what we have discussed in
Designing a URL Shortening service like TinyURL.
How can we plan for the future growth of our system? We can have a large number of logical
partitions to accommodate future data growth, such that in the beginning, multiple logical partitions
reside on a single physical database server. Since each database server can have multiple database
instances on it, we can have separate databases for each logical partition on any server. So whenever
we feel that a particular database server has a lot of data, we can migrate some logical partitions from it
to another server. We can maintain a config file (or a separate database) that can map our logical
partitions to database servers; this will enable us to move partitions around easily. Whenever we want
to move a partition, we only have to update the config file to announce the change.
11. Ranking and News Feed Generation
To create the News Feed for any given user, we need to fetch the latest, most popular and relevant
photos of the people the user follows.
For simplicity, let’s assume we need to fetch top 100 photos for a user’s News Feed. Our application
server will first get a list of people the user follows and then fetch metadata info of latest 100 photos
from each user. In the final step, the server will submit all these photos to our ranking algorithm which
will determine the top 100 photos (based on recency, likeness, etc.) and return them to the user. A
possible problem with this approach would be higher latency as we have to query multiple tables and
perform sorting/merging/ranking on the results. To improve the efficiency, we can pre-generate the
News Feed and store it in a separate table.
Pre-generating the News Feed: We can have dedicated servers that are continuously generating users’
News Feeds and storing them in a ‘UserNewsFeed’ table. So whenever any user needs the latest photos
for their News Feed, we will simply query this table and return the results to the user.
Whenever these servers need to generate the News Feed of a user, they will first query the
UserNewsFeed table to find the last time the News Feed was generated for that user. Then, new News
Feed data will be generated from that time onwards (following the steps mentioned above).
What are the different approaches for sending News Feed contents to the users?
1. Pull: Clients can pull the News Feed contents from the server on a regular basis or manually
whenever they need it. Possible problems with this approach are a) New data might not be shown to the
users until clients issue a pull request b) Most of the time pull requests will result in an empty response
if there is no new data.
2. Push: Servers can push new data to the users as soon as it is available. To efficiently manage this,
users have to maintain a Long Poll request with the server for receiving the updates. A possible
problem with this approach is, a user who follows a lot of people or a celebrity user who has millions
of followers; in this case, the server has to push updates quite frequently.
3. Hybrid: We can adopt a hybrid approach. We can move all the users who have a high number of
follows to a pull-based model and only push data to those users who have a few hundred (or thousand)
follows. Another approach could be that the server pushes updates to all the users not more than a
certain frequency, letting users with a lot of follows/updates to regularly pull data.
For a detailed discussion about News Feed generation, take a look at Designing Facebook’s Newsfeed.
12. News Feed Creation with Sharded Data
One of the most important requirement to create the News Feed for any given user is to fetch the latest
photos from all people the user follows. For this, we need to have a mechanism to sort photos on their
time of creation. To efficiently do this, we can make photo creation time part of the PhotoID. As we
will have a primary index on PhotoID, it will be quite quick to find the latest PhotoIDs.
We can use epoch time for this. Let’s say our PhotoID will have two parts; the first part will be
representing epoch time and the second part will be an auto-incrementing sequence. So to make a new
PhotoID, we can take the current epoch time and append an auto-incrementing ID from our keygenerating DB. We can figure out shard number from this PhotoID ( PhotoID % 10) and store the photo
there.
What could be the size of our PhotoID? Let’s say our epoch time starts today, how many bits we
would need to store the number of seconds for next 50 years?
86400 sec/day * 365 (days a year) * 50 (years) => 1.6 billion seconds
We would need 31 bits to store this number. Since on the average, we are expecting 23 new photos per
second; we can allocate 9 bits to store auto incremented sequence. So every second we can store (2^9
=> 512) new photos. We can reset our auto incrementing sequence every second.
We will discuss more details about this technique under ‘Data Sharding’ in Designing Twitter.
13. Cache and Load balancing
Our service would need a massive-scale photo delivery system to serve the globally distributed users.
Our service should push its content closer to the user using a large number of geographically
distributed photo cache servers and use CDNs (for details see Caching).
We can introduce a cache for metadata servers to cache hot database rows. We can use Memcache to
cache the data and Application servers before hitting database can quickly check if the cache has
desired rows. Least Recently Used (LRU) can be a reasonable cache eviction policy for our system.
Under this policy, we discard the least recently viewed row first.
How can we build more intelligent cache? If we go with 80-20 rule, i.e., 20% of daily read volume
for photos is generating 80% of traffic which means that certain photos are so popular that the majority
of people read them. This dictates that we can try caching 20% of daily read volume of photos and
metadata.
Designing Dropbox
Let's design a file hosting service like Dropbox or Google Drive. Cloud file storage enables users to
store their data on remote servers. Usually, these servers are maintained by cloud storage providers and
made available to users over a network (typically through the Internet). Users pay for their cloud data
storage on a monthly basis. Similar Services: OneDrive, Google Drive Difficulty Level: Medium
1. Why Cloud Storage?
Cloud file storage services have become very popular recently as they simplify the storage and
exchange of digital resources among multiple devices. The shift from using single personal computers
to using multiple devices with different platforms and operating systems such as smartphones and
tablets each with portable access from various geographical locations at any time, is believed to be
accountable for the huge popularity of cloud storage services. Following are some of the top benefits of
such services:
Availability: The motto of cloud storage services is to have data availability anywhere, anytime. Users
can access their files/photos from any device whenever and wherever they like.
Reliability and Durability: Another benefit of cloud storage is that it offers 100% reliability and
durability of data. Cloud storage ensures that users will never lose their data by keeping multiple copies
of the data stored on different geographically located servers.
Scalability: Users will never have to worry about getting out of storage space. With cloud storage you
have unlimited storage as long as you are ready to pay for it.
If you haven’t used dropbox.com before, we would highly recommend creating an account there and
uploading/editing a file and also going through the different options their service offers. This will help
you a lot in understanding this chapter.
2. Requirements and Goals of the System
� You should always clarify requirements at the beginning of the interview. Be sure to ask
questions to find the exact scope of the system that the interviewer has in mind.
What do we wish to achieve from a Cloud Storage system? Here are the top-level requirements for our
system:
1. Users should be able to upload and download their files/photos from any device.
2. Users should be able to share files or folders with other users.
3. Our service should support automatic synchronization between devices, i.e., after updating a file
on one device, it should get synchronized on all devices.
4. The system should support storing large files up to a GB.
5. ACID-ity is required. Atomicity, Consistency, Isolation and Durability of all file operations
should be guaranteed.
6. Our system should support offline editing. Users should be able to add/delete/modify files while
offline, and as soon as they come online, all their changes should be synced to the remote
servers and other online devices.
Extended Requirements
• The system should support snapshotting of the data, so that users can go back to any version of
the files.
3. Some Design Considerations
• We should expect huge read and write volumes.
• Read to write ratio is expected to be nearly the same.
• Internally, files can be stored in small parts or chunks (say 4MB); this can provide a lot of
benefits i.e. all failed operations shall only be retried for smaller parts of a file. If a user fails to
upload a file, then only the failing chunk will be retried.
• We can reduce the amount of data exchange by transferring updated chunks only.
• By removing duplicate chunks, we can save storage space and bandwidth usage.
• Keeping a local copy of the metadata (file name, size, etc.) with the client can save us a lot of
round trips to the server.
• For small changes, clients can intelligently upload the diffs instead of the whole chunk.
4. Capacity Estimation and Constraints
•
•
•
•
Let’s assume that we have 500M total users, and 100M daily active users (DAU).
Let’s assume that on average each user connects from three different devices.
On average if a user has 200 files/photos, we will have 100 billion total files.
Let’s assume that average file size is 100KB, this would give us ten petabytes of total storage.
100B * 100KB => 10PB
• Let’s also assume that we will have one million active connections per minute.
Object 1
5. High Level Design
The user will specify a folder as the workspace on their device. Any file/photo/folder placed in this
folder will be uploaded to the cloud, and whenever a file is modified or deleted, it will be reflected in
the same way in the cloud storage. The user can specify similar workspaces on all their devices and any
modification done on one device will be propagated to all other devices to have the same view of the
workspace everywhere.
At a high level, we need to store files and their metadata information like File Name, File Size,
Directory, etc., and who this file is shared with. So, we need some servers that can help the clients to
upload/download files to Cloud Storage and some servers that can facilitate updating metadata about
files and users. We also need some mechanism to notify all clients whenever an update happens so they
can synchronize their files.
As shown in the diagram below, Block servers will work with the clients to upload/download files from
cloud storage and Metadata servers will keep metadata of files updated in a SQL or NoSQL database.
Synchronization servers will handle the workflow of notifying all clients about different changes for
synchronization.
High level design for Dropbox
6. Component Design
Let’s go through the major components of our system one by one:
a. Client
The Client Application monitors the workspace folder on the user’s machine and syncs all files/folders
in it with the remote Cloud Storage. The client application will work with the storage servers to upload,
download, and modify actual files to backend Cloud Storage. The client also interacts with the remote
Synchronization Service to handle any file metadata updates, e.g., change in the file name, size,
modification date, etc.
Here are some of the essential operations for the client:
1. Upload and download files.
2. Detect file changes in the workspace folder.
3. Handle conflict due to offline or concurrent updates.
How do we handle file transfer efficiently? As mentioned above, we can break each file into smaller
chunks so that we transfer only those chunks that are modified and not the whole file. Let’s say we
divide each file into fixed sizes of 4MB chunks. We can statically calculate what could be an optimal
chunk size based on 1) Storage devices we use in the cloud to optimize space utilization and
input/output operations per second (IOPS) 2) Network bandwidth 3) Average file size in the storage etc.
In our metadata, we should also keep a record of each file and the chunks that constitute it.
Should we keep a copy of metadata with Client? Keeping a local copy of metadata not only enable
us to do offline updates but also saves a lot of round trips to update remote metadata.
How can clients efficiently listen to changes happening with other clients? One solution could be
that the clients periodically check with the server if there are any changes. The problem with this
approach is that we will have a delay in reflecting changes locally as clients will be checking for
changes periodically compared to a server notifying whenever there is some change. If the client
frequently checks the server for changes, it will not only be wasting bandwidth, as the server has to
return an empty response most of the time, but will also be keeping the server busy. Pulling information
in this manner is not scalable.
A solution to the above problem could be to use HTTP long polling. With long polling the client
requests information from the server with the expectation that the server may not respond immediately.
If the server has no new data for the client when the poll is received, instead of sending an empty
response, the server holds the request open and waits for response information to become available.
Once it does have new information, the server immediately sends an HTTP/S response to the client,
completing the open HTTP/S Request. Upon receipt of the server response, the client can immediately
issue another server request for future updates.
Based on the above considerations, we can divide our client into following four parts:
I. Internal Metadata Database will keep track of all the files, chunks, their versions, and their
location in the file system.
II. Chunker will split the files into smaller pieces called chunks. It will also be responsible for
reconstructing a file from its chunks. Our chunking algorithm will detect the parts of the files that have
been modified by the user and only transfer those parts to the Cloud Storage; this will save us
bandwidth and synchronization time.
III. Watcher will monitor the local workspace folders and notify the Indexer (discussed below) of any
action performed by the users, e.g. when users create, delete, or update files or folders. Watcher also
listens to any changes happening on other clients that are broadcasted by Synchronization service.
IV. Indexer will process the events received from the Watcher and update the internal metadata
database with information about the chunks of the modified files. Once the chunks are successfully
submitted/downloaded to the Cloud Storage, the Indexer will communicate with the remote
Synchronization Service to broadcast changes to other clients and update remote metadata database.
How should clients handle slow servers? Clients should exponentially back-off if the server is
busy/not-responding. Meaning, if a server is too slow to respond, clients should delay their retries and
this delay should increase exponentially.
Should mobile clients sync remote changes immediately? Unlike desktop or web clients, mobile
clients usually sync on demand to save user’s bandwidth and space.
b. Metadata Database
The Metadata Database is responsible for maintaining the versioning and metadata information about
files/chunks, users, and workspaces. The Metadata Database can be a relational database such as
MySQL, or a NoSQL database service such as DynamoDB. Regardless of the type of the database, the
Synchronization Service should be able to provide a consistent view of the files using a database,
especially if more than one user is working with the same file simultaneously. Since NoSQL data stores
do not support ACID properties in favor of scalability and performance, we need to incorporate the
support for ACID properties programmatically in the logic of our Synchronization Service in case we
opt for this kind of database. However, using a relational database can simplify the implementation of
the Synchronization Service as they natively support ACID properties.
The metadata Database should be storing information about following objects:
1.
2.
3.
4.
5.
Chunks
Files
User
Devices
Workspace (sync folders)
c. Synchronization Service
The Synchronization Service is the component that processes file updates made by a client and applies
these changes to other subscribed clients. It also synchronizes clients’ local databases with the
information stored in the remote Metadata DB. The Synchronization Service is the most important part
of the system architecture due to its critical role in managing the metadata and synchronizing users’
files. Desktop clients communicate with the Synchronization Service to either obtain updates from the
Cloud Storage or send files and updates to the Cloud Storage and, potentially, other users. If a client
was offline for a period, it polls the system for new updates as soon as they come online. When the
Synchronization Service receives an update request, it checks with the Metadata Database for
consistency and then proceeds with the update. Subsequently, a notification is sent to all subscribed
users or devices to report the file update.
The Synchronization Service should be designed in such a way that it transmits less data between
clients and the Cloud Storage to achieve a better response time. To meet this design goal, the
Synchronization Service can employ a differencing algorithm to reduce the amount of the data that
needs to be synchronized. Instead of transmitting entire files from clients to the server or vice versa, we
can just transmit the difference between two versions of a file. Therefore, only the part of the file that
has been changed is transmitted. This also decreases bandwidth consumption and cloud data storage for
the end user. As described above, we will be dividing our files into 4MB chunks and will be
transferring modified chunks only. Server and clients can calculate a hash (e.g., SHA-256) to see
whether to update the local copy of a chunk or not. On the server, if we already have a chunk with a
similar hash (even from another user), we don’t need to create another copy, we can use the same
chunk. This is discussed in detail later under Data Deduplication.
To be able to provide an efficient and scalable synchronization protocol we can consider using a
communication middleware between clients and the Synchronization Service. The messaging
middleware should provide scalable message queuing and change notifications to support a high
number of clients using pull or push strategies. This way, multiple Synchronization Service instances
can receive requests from a global request Queue, and the communication middleware will be able to
balance its load.
d. Message Queuing Service
An important part of our architecture is a messaging middleware that should be able to handle a
substantial number of requests. A scalable Message Queuing Service that supports asynchronous
message-based communication between clients and the Synchronization Service best fits the
requirements of our application. The Message Queuing Service supports asynchronous and loosely
coupled message-based communication between distributed components of the system. The Message
Queuing Service should be able to efficiently store any number of messages in a highly available,
reliable and scalable queue.
The Message Queuing Service will implement two types of queues in our system. The Request Queue
is a global queue and all clients will share it. Clients’ requests to update the Metadata Database will be
sent to the Request Queue first, from there the Synchronization Service will take it to update metadata.
The Response Queues that correspond to individual subscribed clients are responsible for delivering the
update messages to each client. Since a message will be deleted from the queue once received by a
client, we need to create separate Response Queues for each subscribed client to share update
messages.
e. Cloud/Block Storage
Cloud/Block Storage stores chunks of files uploaded by the users. Clients directly interact with the
storage to send and receive objects from it. Separation of the metadata from storage enables us to use
any storage either in the cloud or in-house.
Detailed component design for Dropbox
7. File Processing Workflow
The sequence below shows the interaction between the components of the application in a scenario
when Client A updates a file that is shared with Client B and C, so they should receive the update too.
If the other clients are not online at the time of the update, the Message Queuing Service keeps the
update notifications in separate response queues for them until they come online later.
1.
2.
3.
4.
Client A uploads chunks to cloud storage.
Client A updates metadata and commits changes.
Client A gets confirmation and notifications are sent to Clients B and C about the changes.
Client B and C receive metadata changes and download updated chunks.
8. Data Deduplication
Data deduplication is a technique used for eliminating duplicate copies of data to improve storage
utilization. It can also be applied to network data transfers to reduce the number of bytes that must be
sent. For each new incoming chunk, we can calculate a hash of it and compare that hash with all the
hashes of the existing chunks to see if we already have the same chunk present in our storage.
We can implement deduplication in two ways in our system:
a. Post-process deduplication
With post-process deduplication, new chunks are first stored on the storage device and later some
process analyzes the data looking for duplication. The benefit is that clients will not need to wait for the
hash calculation or lookup to complete before storing the data, thereby ensuring that there is no
degradation in storage performance. Drawbacks of this approach are 1) We will unnecessarily be
storing duplicate data, though for a short time, 2) Duplicate data will be transferred consuming
bandwidth.
b. In-line deduplication
Alternatively, deduplication hash calculations can be done in real-time as the clients are entering data
on their device. If our system identifies a chunk that it has already stored, only a reference to the
existing chunk will be added in the metadata, rather than a full copy of the chunk. This approach will
give us optimal network and storage usage.
9. Metadata Partitioning
To scale out metadata DB, we need to partition it so that it can store information about millions of users
and billions of files/chunks. We need to come up with a partitioning scheme that would divide and store
our data in different DB servers.
1. Vertical Partitioning: We can partition our database in such a way that we store tables related to one
particular feature on one server. For example, we can store all the user related tables in one database
and all files/chunks related tables in another database. Although this approach is straightforward to
implement it has some issues:
1. Will we still have scale issues? What if we have trillions of chunks to be stored and our database
cannot support storing such a huge number of records? How would we further partition such
tables?
2. Joining two tables in two separate databases can cause performance and consistency issues.
How frequently do we have to join user and file tables?
2. Range Based Partitioning: What if we store files/chunks in separate partitions based on the first
letter of the File Path? In that case, we save all the files starting with the letter ‘A’ in one partition and
those that start with the letter ‘B’ into another partition and so on. This approach is called range based
partitioning. We can even combine certain less frequently occurring letters into one database partition.
We should come up with this partitioning scheme statically so that we can always store/find a file in a
predictable manner.
The main problem with this approach is that it can lead to unbalanced servers. For example, if we
decide to put all files starting with the letter ‘E’ into a DB partition, and later we realize that we have
too many files that start with the letter ‘E’, to such an extent that we cannot fit them into one DB
partition.
3. Hash-Based Partitioning: In this scheme we take a hash of the object we are storing and based on
this hash we figure out the DB partition to which this object should go. In our case, we can take the
hash of the ‘FileID’ of the File object we are storing to determine the partition the file will be stored.
Our hashing function will randomly distribute objects into different partitions, e.g., our hashing
function can always map any ID to a number between [1…256], and this number would be the partition
we will store our object.
This approach can still lead to overloaded partitions, which can be solved by using Consistent Hashing.
10. Caching
We can have two kinds of caches in our system. To deal with hot files/chunks we can introduce a cache
for Block storage. We can use an off-the-shelf solution like Memcached that can store whole chunks
with its respective IDs/Hashes and Block servers before hitting Block storage can quickly check if the
cache has desired chunk. Based on clients’ usage pattern we can determine how many cache servers we
need. A high-end commercial server can have 144GB of memory; one such server can cache 36K
chunks.
Which cache replacement policy would best fit our needs? When the cache is full, and we want to
replace a chunk with a newer/hotter chunk, how would we choose? Least Recently Used (LRU) can be
a reasonable policy for our system. Under this policy, we discard the least recently used chunk first.
Load Similarly, we can have a cache for Metadata DB.
11. Load Balancer (LB)
We can add the Load balancing layer at two places in our system: 1) Between Clients and Block servers
and 2) Between Clients and Metadata servers. Initially, a simple Round Robin approach can be adopted
that distributes incoming requests equally among backend servers. This LB is simple to implement and
does not introduce any overhead. Another benefit of this approach is if a server is dead, LB will take it
out of the rotation and will stop sending any traffic to it. A problem with Round Robin LB is, it won’t
take server load into consideration. If a server is overloaded or slow, the LB will not stop sending new
requests to that server. To handle this, a more intelligent LB solution can be placed that periodically
queries backend server about their load and adjusts traffic based on that.
12. Security, Permissions and File Sharing
One of the primary concerns users will have while storing their files in the cloud is the privacy and
security of their data, especially since in our system users can share their files with other users or even
make them public to share it with everyone. To handle this, we will be storing the permissions of each
file in our metadata DB to reflect what files are visible or modifiable by any user.
Designing Facebook Messenger
Let's design an instant messaging service like Facebook Messenger where users can send text messages
to each other through web and mobile interfaces.
1. What is Facebook Messenger?
Facebook Messenger is a software application which provides text-based instant messaging services to
its users. Messenger users can chat with their Facebook friends both from cell-phones and Facebook’s
website.
2. Requirements and Goals of the System
Our Messenger should meet the following requirements:
Functional Requirements:
1. Messenger should support one-on-one conversations between users.
2. Messenger should keep track of the online/offline statuses of its users.
3. Messenger should support persistent storage of chat history.
Non-functional Requirements:
1. Users should have real-time chat experience with minimum latency.
2. Our system should be highly consistent; users should be able to see the same chat history on all
their devices.
3. Messenger’s high availability is desirable; we can tolerate lower availability in the interest of
consistency.
Extended Requirements:
• Group Chats: Messenger should support multiple people talking to each other in a group.
• Push notifications: Messenger should be able to notify users of new messages when they are
offline.
3. Capacity Estimation and Constraints
Let’s assume that we have 500 million daily active users and on average each user sends 40 messages
daily; this gives us 20 billion messages per day.
Storage Estimation: Let’s assume that on average a message is 100 bytes, so to store all the messages
for one day we would need 2TB of storage.
20 billion messages * 100 bytes => 2 TB/day
To store five years of chat history, we would need 3.6 petabytes of storage.
2 TB * 365 days * 5 years ~= 3.6 PB
Other than the chat messages, we would also need to store users’ information, messages’ metadata (ID,
Timestamp, etc.). Not to mention, the above calculation doesn’t take data compression and replication
in consideration.
Bandwidth Estimation: If our service is getting 2TB of data every day, this will give us 25MB of
incoming data for each second.
2 TB / 86400 sec ~= 25 MB/s
Since each incoming message needs to go out to another user, we will need the same amount of
bandwidth 25MB/s for both upload and download.
High level estimates:
Total messages
Storage for each day
Storage for 5 years
Incomming data
Outgoing data
20 billion per day
2TB
3.6PB
25MB/s
25MB/s
4. High Level Design
At a high-level, we will need a chat server that will be the central piece, orchestrating all the
communications between users. When a user wants to send a message to another user, they will connect
to the chat server and send the message to the server; the server then passes that message to the other
user and also stores it in the database.
The detailed workflow would look like this:
1.
2.
3.
4.
User-A sends a message to User-B through the chat server.
The server receives the message and sends an acknowledgment to User-A.
The server stores the message in its database and sends the message to User-B.
User-B receives the message and sends the acknowledgment to the server.
5. The server notifies User-A that the message has been delivered successfully to User-B.
Request flow for sending a message
1 of 8
5. Detailed Component Design
Let’s try to build a simple solution first where everything runs on one server. At the high level our
system needs to handle the following use cases:
1. Receive incoming messages and deliver outgoing messages.
2. Store and retrieve messages from the database.
3. Keep a record of which user is online or has gone offline, and notify all the relevant users about
these status changes.
Let’s talk about these scenarios one by one:
a. Messages Handling
How would we efficiently send/receive messages? To send messages, a user needs to connect to the
server and post messages for the other users. To get a message from the server, the user has two
options:
1. Pull model: Users can periodically ask the server if there are any new messages for them.
2. Push model: Users can keep a connection open with the server and can depend upon the server
to notify them whenever there are new messages.
If we go with our first approach, then the server needs to keep track of messages that are still waiting to
be delivered, and as soon as the receiving user connects to the server to ask for any new message, the
server can return all the pending messages. To minimize latency for the user, they have to check the
server quite frequently, and most of the time they will be getting an empty response if there are no
pending message. This will waste a lot of resources and does not look like an efficient solution.
If we go with our second approach, where all the active users keep a connection open with the server,
then as soon as the server receives a message it can immediately pass the message to the intended user.
This way, the server does not need to keep track of the pending messages, and we will have minimum
latency, as the messages are delivered instantly on the opened connection.
How will clients maintain an open connection with the server? We can use HTTP Long Polling or
WebSockets. In long polling, clients can request information from the server with the expectation that
the server may not respond immediately. If the server has no new data for the client when the poll is
received, instead of sending an empty response, the server holds the request open and waits for
response information to become available. Once it does have new information, the server immediately
sends the response to the client, completing the open request. Upon receipt of the server response, the
client can immediately issue another server request for future updates. This gives a lot of improvements
in latencies, throughputs, and performance. The long polling request can timeout or can receive a
disconnect from the server, in that case, the client has to open a new request.
How can the server keep track of all the opened connection to redirect messages to the users
efficiently? The server can maintain a hash table, where “key” would be the UserID and “value” would
be the connection object. So whenever the server receives a message for a user, it looks up that user in
the hash table to find the connection object and sends the message on the open request.
What will happen when the server receives a message for a user who has gone offline? If the
receiver has disconnected, the server can notify the sender about the delivery failure. If it is a
temporary disconnect, e.g., the receiver’s long-poll request just timed out, then we should expect a
reconnect from the user. In that case, we can ask the sender to retry sending the message. This retry
could be embedded in the client’s logic so that users don’t have to retype the message. The server can
also store the message for a while and retry sending it once the receiver reconnects.
How many chat servers we need? Let’s plan for 500 million connections at any time. Assuming a
modern server can handle 50K concurrent connections at any time, we would need 10K such servers.
How do we know which server holds the connection to which user? We can introduce a software
load balancer in front of our chat servers; that can map each UserID to a server to redirect the request.
How should the server process a ‘deliver message’ request? The server needs to do the following
things upon receiving a new message: 1) Store the message in the database 2) Send the message to the
receiver and 3) Send an acknowledgment to the sender.
The chat server will first find the server that holds the connection for the receiver and pass the message
to that server to send it to the receiver. The chat server can then send the acknowledgment to the
sender; we don’t need to wait for storing the message in the database (this can happen in the
background). Storing the message is discussed in the next section.
How does the messenger maintain the sequencing of the messages? We can store a timestamp with
each message, which is the time the message is received by the server. This will still not ensure correct
ordering of messages for clients. The scenario where the server timestamp cannot determine the exact
order of messages would look like this:
1.
2.
3.
4.
5.
User-1 sends a message M1 to the server for User-2.
The server receives M1 at T1.
Meanwhile, User-2 sends a message M2 to the server for User-1.
The server receives the message M2 at T2, such that T2 > T1.
The server sends message M1 to User-2 and M2 to User-1.
So User-1 will see M1 first and then M2, whereas User-2 will see M2 first and then M1.
To resolve this, we need to keep a sequence number with every message for each client. This sequence
number will determine the exact ordering of messages for EACH user. With this solution both clients
will see a different view of the message sequence, but this view will be consistent for them on all
devices.
b. Storing and retrieving the messages from the database
Whenever the chat server receives a new message, it needs to store it in the database. To do so, we have
two options:
1. Start a separate thread, which will work with the database to store the message.
2. Send an asynchronous request to the database to store the message.
We have to keep certain things in mind while designing our database:
1.
2.
3.
4.
How to efficiently work with the database connection pool.
How to retry failed requests.
Where to log those requests that failed even after some retries.
How to retry these logged requests (that failed after the retry) when all the issues have resolved.
Which storage system we should use? We need to have a database that can support a very high rate of
small updates and also fetch a range of records quickly. This is required because we have a huge
number of small messages that need to be inserted in the database and, while querying, a user is mostly
interested in sequentially accessing the messages.
We cannot use RDBMS like MySQL or NoSQL like MongoDB because we cannot afford to read/write
a row from the database every time a user receives/sends a message. This will not only make the basic
operations of our service run with high latency, but also create a huge load on databases.
Both of our requirements can be easily met with a wide-column database solution like HBase. HBase is
a column-oriented key-value NoSQL database that can store multiple values against one key into
multiple columns. HBase is modeled after Google’s BigTable and runs on top of Hadoop Distributed
File System (HDFS). HBase groups data together to store new data in a memory buffer and, once the
buffer is full, it dumps the data to the disk. This way of storage not only helps storing a lot of small data
quickly, but also fetching rows by the key or scanning ranges of rows. HBase is also an efficient
database to store variably sized data, which is also required by our service.
How should clients efficiently fetch data from the server? Clients should paginate while fetching
data from the server. Page size could be different for different clients, e.g., cell phones have smaller
screens, so we need a fewer number of message/conversations in the viewport.
c. Managing user’s status
We need to keep track of user’s online/offline status and notify all the relevant users whenever a status
change happens. Since we are maintaining a connection object on the server for all active users, we can
easily figure out the user’s current status from this. With 500M active users at any time, if we have to
broadcast each status change to all the relevant active users, it will consume a lot of resources. We can
do the following optimization around this:
1. Whenever a client starts the app, it can pull the current status of all users in their friends’ list.
2. Whenever a user sends a message to another user that has gone offline, we can send a failure to
the sender and update the status on the client.
3. Whenever a user comes online, the server can always broadcast that status with a delay of a few
seconds to see if the user does not go offline immediately.
4. Client’s can pull the status from the server about those users that are being shown on the user’s
viewport. This should not be a frequent operation, as the server is broadcasting the online status
of users and we can live with the stale offline status of users for a while.
5. Whenever the client starts a new chat with another user, we can pull the status at that time.
Detailed component design for Facebook messenger
Design Summary: Clients will open a connection to the chat server to send a message; the server will
then pass it to the requested user. All the active users will keep a connection open with the server to
receive messages. Whenever a new message arrives, the chat server will push it to the receiving user on
the long poll request. Messages can be stored in HBase, which supports quick small updates, and range
based searches. The servers can broadcast the online status of a user to other relevant users. Clients can
pull status updates for users who are visible in the client’s viewport on a less frequent basis.
6. Data partitioning
Since we will be storing a lot of data (3.6PB for five years), we need to distribute it onto multiple
database servers. What will be our partitioning scheme?
Partitioning based on UserID: Let’s assume we partition based on the hash of the UserID so that we
can keep all messages of a user on the same database. If one DB shard is 4TB, we will have
“3.6PB/4TB ~= 900” shards for five years. For simplicity, let’s assume we keep 1K shards. So we will
find the shard number by “hash(UserID) % 1000” and then store/retrieve the data from there. This
partitioning scheme will also be very quick to fetch chat history for any user.
In the beginning, we can start with fewer database servers with multiple shards residing on one
physical server. Since we can have multiple database instances on a server, we can easily store multiple
partitions on a single server. Our hash function needs to understand this logical partitioning scheme so
that it can map multiple logical partitions on one physical server.
Since we will store an unlimited history of messages, we can start with a big number of logical
partitions, which will be mapped to fewer physical servers, and as our storage demand increases, we
can add more physical servers to distribute our logical partitions.
Partitioning based on MessageID: If we store different messages of a user on separate database
shards, fetching a range of messages of a chat would be very slow, so we should not adopt this scheme.
7. Cache
We can cache a few recent messages (say last 15) in a few recent conversations that are visible in a
user’s viewport (say last 5). Since we decided to store all of the user’s messages on one shard, cache for
a user should entirely reside on one machine too.
8. Load balancing
We will need a load balancer in front of our chat servers; that can map each UserID to a server that
holds the connection for the user and then direct the request to that server. Similarly, we would need a
load balancer for our cache servers.
9. Fault tolerance and Replication
What will happen when a chat server fails? Our chat servers are holding connections with the users.
If a server goes down, should we devise a mechanism to transfer those connections to some other
server? It’s extremely hard to failover TCP connections to other servers; an easier approach can be to
have clients automatically reconnect if the connection is lost.
Should we store multiple copies of user messages? We cannot have only one copy of the user’s data,
because if the server holding the data crashes or is down permanently, we don’t have any mechanism to
recover that data. For this, either we have to store multiple copies of the data on different servers or use
techniques like Reed-Solomon encoding to distribute and replicate it.
10. Extended Requirements
a. Group chat
We can have separate group-chat objects in our system that can be stored on the chat servers. A groupchat object is identified by GroupChatID and will also maintain a list of people who are part of that
chat. Our load balancer can direct each group chat message based on GroupChatID and the server
handling that group chat can iterate through all the users of the chat to find the server handling the
connection of each user to deliver the message.
In databases, we can store all the group chats in a separate table partitioned based on GroupChatID.
b. Push notifications
In our current design user’s can only send messages to active users and if the receiving user is offline,
we send a failure to the sending user. Push notifications will enable our system to send messages to
offline users.
For Push notifications, each user can opt-in from their device (or a web browser) to get notifications
whenever there is a new message or event. Each manufacturer maintains a set of servers that handles
pushing these notifications to the user.
To have push notifications in our system, we would need to set up a Notification server, which will take
the messages for offline users and send them to the manufacture’s push notification server, which will
then send them to the user’s device.
Designing Twitter
Let's design a Twitter-like social networking service. Users of the service will be able to post tweets,
follow other people, and favorite tweets. Difficulty Level: Medium
1. What is Twitter?
Twitter is an online social networking service where users post and read short 140-character messages
called "tweets." Registered users can post and read tweets, but those who are not registered can only
read them. Users access Twitter through their website interface, SMS, or mobile app.
2. Requirements and Goals of the System
We will be designing a simpler version of Twitter with the following requirements:
Functional Requirements
1.
2.
3.
4.
Users should be able to post new tweets.
A user should be able to follow other users.
Users should be able to mark tweets as favorites.
The service should be able to create and display a user’s timeline consisting of top tweets from
all the people the user follows.
5. Tweets can contain photos and videos.
Non-functional Requirements
1. Our service needs to be highly available.
2. Acceptable latency of the system is 200ms for timeline generation.
3. Consistency can take a hit (in the interest of availability); if a user doesn’t see a tweet for a
while, it should be fine.
Extended Requirements
1.
2.
3.
4.
5.
6.
7.
Searching for tweets.
Replying to a tweet.
Trending topics – current hot topics/searches.
Tagging other users.
Tweet Notification.
Who to follow? Suggestions?
Moments.
3. Capacity Estimation and Constraints
Let’s assume we have one billion total users with 200 million daily active users (DAU). Also assume
we have 100 million new tweets every day and on average each user follows 200 people.
How many favorites per day? If, on average, each user favorites five tweets per day we will have:
200M users * 5 favorites => 1B favorites
How many total tweet-views will our system generate? Let’s assume on average a user visits their
timeline two times a day and visits five other people’s pages. On each page if a user sees 20 tweets,
then our system will generate 28B/day total tweet-views:
200M DAU * ((2 + 5) * 20 tweets) => 28B/day
Storage Estimates Let’s say each tweet has 140 characters and we need two bytes to store a character
without compression. Let’s assume we need 30 bytes to store metadata with each tweet (like ID,
timestamp, user ID, etc.). Total storage we would need:
100M * (280 + 30) bytes => 30GB/day
What would our storage needs be for five years? How much storage we would need for users’ data,
follows, favorites? We will leave this for the exercise.
Not all tweets will have media, let’s assume that on average every fifth tweet has a photo and every
tenth has a video. Let’s also assume on average a photo is 200KB and a video is 2MB. This will lead us
to have 24TB of new media every day.
(100M/5 photos * 200KB) + (100M/10 videos * 2MB) ~= 24TB/day
Bandwidth Estimates Since total ingress is 24TB per day, this would translate into 290MB/sec.
Remember that we have 28B tweet views per day. We must show the photo of every tweet (if it has a
photo), but let’s assume that the users watch every 3rd video they see in their timeline. So, total egress
will be:
(28B * 280 bytes) / 86400s of text => 93MB/s
+ (28B/5 * 200KB ) / 86400s of photos => 13GB/S
+ (28B/10/3 * 2MB ) / 86400s of Videos => 22GB/s
Total ~= 35GB/s
4. System APIs
�
Once we've finalized the requirements, it's always a good idea to define the system APIs. This
should explicitly state what is expected from the system.
We can have SOAP or REST APIs to expose the functionality of our service. Following could be the
definition of the API for posting a new tweet:
tweet(api_dev_key, tweet_data, tweet_location, user_location, media_ids,
maximum_results_to_return)
Parameters:
api_dev_key (string): The API developer key of a registered account. This will be used to, among other
things, throttle users based on their allocated quota.
tweet_data (string): The text of the tweet, typically up to 140 characters.
tweet_location (string): Optional location (longitude, latitude) this Tweet refers to. user_location
(string): Optional location (longitude, latitude) of the user adding the tweet.
media_ids (number[]): Optional list of media_ids to be associated with the Tweet. (All the media photo,
video, etc. need to be uploaded separately).
Returns: (string)
A successful post will return the URL to access that tweet. Otherwise, an appropriate HTTP error is
returned.
5. High Level System Design
We need a system that can efficiently store all the new tweets, 100M/86400s => 1150 tweets per second
and read 28B/86400s => 325K tweets per second. It is clear from the requirements that this will be a
read-heavy system.
At a high level, we need multiple application servers to serve all these requests with load balancers in
front of them for traffic distributions. On the backend, we need an efficient database that can store all
the new tweets and can support a huge number of reads. We also need some file storage to store photos
and videos.
Although our expected daily write load is 100 million and read load is 28 billion tweets. This means on
average our system will receive around 1160 new tweets and 325K read requests per second. This
traffic will be distributed unevenly throughout the day, though, at peak time we should expect at least a
few thousand write requests and around 1M read requests per second. We should keep this in mind
while designing the architecture of our system.
6. Database Schema
We need to store data about users, their tweets, their favorite tweets, and people they follow.
Tweet
PK
<span>TweetID:
int</span>
User
PK
<span>UserID:
int</span>
[Not supported by viewer]
<span>Name: varchar(20)</span>
<span>Content: varchar(140)</span> <span>Email: varchar(32)</span>
[Not supported by viewer]
DateOfBirth: datetime<br>
TweetLongitude: int<br>
[Not supported by viewer]
CreationDate: datetime<br>
<span>LastLogin: datatime</span>
UserLongitude: int<br>
<span>CreationDate: datetime</span>
<span>NumFavorites</span>: int<br>
<span>UserFollow</span>
PKsupported by viewer]
[Not
Favorite
PKsupported by viewer]
[Not
CreationDate: datetime<br>
For choosing between SQL and NoSQL databases to store the above schema, please see ‘Database
schema’ under Designing Instagram.
7. Data Sharding
Since we have a huge number of new tweets every day and our read load is extremely high too, we
need to distribute our data onto multiple machines such that we can read/write it efficiently. We have
many options to shard our data; let’s go through them one by one:
Sharding based on UserID: We can try storing all the data of a user on one server. While storing, we
can pass the UserID to our hash function that will map the user to a database server where we will store
all of the user’s tweets, favorites, follows, etc. While querying for tweets/follows/favorites of a user, we
can ask our hash function where can we find the data of a user and then read it from there. This
approach has a couple of issues:
1. What if a user becomes hot? There could be a lot of queries on the server holding the user. This
high load will affect the performance of our service.
2. Over time some users can end up storing a lot of tweets or having a lot of follows compared to
others. Maintaining a uniform distribution of growing user data is quite difficult.
To recover from these situations either we have to repartition/redistribute our data or use consistent
hashing.
Sharding based on TweetID: Our hash function will map each TweetID to a random server where we
will store that Tweet. To search for tweets, we have to query all servers, and each server will return a
set of tweets. A centralized server will aggregate these results to return them to the user. Let’s look into
timeline generation example; here are the number of steps our system has to perform to generate a
user’s timeline:
1. Our application (app) server will find all the people the user follows.
2. App server will send the query to all database servers to find tweets from these people.
3. Each database server will find the tweets for each user, sort them by recency and return the top
tweets.
4. App server will merge all the results and sort them again to return the top results to the user.
This approach solves the problem of hot users, but, in contrast to sharding by UserID, we have to query
all database partitions to find tweets of a user, which can result in higher latencies.
We can further improve our performance by introducing cache to store hot tweets in front of the
database servers.
Sharding based on Tweet creation time: Storing tweets based on creation time will give us the
advantage of fetching all the top tweets quickly and we only have to query a very small set of servers.
The problem here is that the traffic load will not be distributed, e.g., while writing, all new tweets will
be going to one server and the remaining servers will be sitting idle. Similarly, while reading, the server
holding the latest data will have a very high load as compared to servers holding old data.
What if we can combine sharding by TweedID and Tweet creation time? If we don’t store tweet
creation time separately and use TweetID to reflect that, we can get benefits of both the approaches.
This way it will be quite quick to find the latest Tweets. For this, we must make each TweetID
universally unique in our system and each TweetID should contain a timestamp too.
We can use epoch time for this. Let’s say our TweetID will have two parts: the first part will be
representing epoch seconds and the second part will be an auto-incrementing sequence. So, to make a
new TweetID, we can take the current epoch time and append an auto-incrementing number to it. We
can figure out the shard number from this TweetID and store it there.
What could be the size of our TweetID? Let’s say our epoch time starts today, how many bits we would
need to store the number of seconds for the next 50 years?
86400 sec/day * 365 (days a year) * 50 (years) => 1.6B
We would need 31 bits to store this number. Since on average we are expecting 1150 new tweets per
second, we can allocate 17 bits to store auto incremented sequence; this will make our TweetID 48 bits
long. So, every second we can store (2^17 => 130K) new tweets. We can reset our auto incrementing
sequence every second. For fault tolerance and better performance, we can have two database servers
to generate auto-incrementing keys for us, one generating even numbered keys and the other generating
odd numbered keys.
If we assume our current epoch seconds are “1483228800,” our TweetID will look like this:
1483228800 000001
1483228800 000002
1483228800 000003
1483228800 000004
…
If we make our TweetID 64bits (8 bytes) long, we can easily store tweets for the next 100 years and
also store them for mili-seconds granularity.
In the above approach, we still have to query all the servers for timeline generation, but our reads (and
writes) will be substantially quicker.
1. Since we don’t have any secondary index (on creation time) this will reduce our write latency.
2. While reading, we don’t need to filter on creation-time as our primary key has epoch time
included in it.
8. Cache
We can introduce a cache for database servers to cache hot tweets and users. We can use an off-theshelf solution like Memcache that can store the whole tweet objects. Application servers, before hitting
database, can quickly check if the cache has desired tweets. Based on clients’ usage patterns we can
determine how many cache servers we need.
Which cache replacement policy would best fit our needs? When the cache is full and we want to
replace a tweet with a newer/hotter tweet, how would we choose? Least Recently Used (LRU) can be a
reasonable policy for our system. Under this policy, we discard the least recently viewed tweet first.
How can we have a more intelligent cache? If we go with 80-20 rule, that is 20% of tweets
generating 80% of read traffic which means that certain tweets are so popular that a majority of people
read them. This dictates that we can try to cache 20% of daily read volume from each shard.
What if we cache the latest data? Our service can benefit from this approach. Let’s say if 80% of our
users see tweets from the past three days only; we can try to cache all the tweets from the past three
days. Let’s say we have dedicated cache servers that cache all the tweets from all the users from the
past three days. As estimated above, we are getting 100 million new tweets or 30GB of new data every
day (without photos and videos). If we want to store all the tweets from last three days, we will need
less than 100GB of memory. This data can easily fit into one server, but we should replicate it onto
multiple servers to distribute all the read traffic to reduce the load on cache servers. So whenever we
are generating a user’s timeline, we can ask the cache servers if they have all the recent tweets for that
user. If yes, we can simply return all the data from the cache. If we don’t have enough tweets in the
cache, we have to query the backend server to fetch that data. On a similar design, we can try caching
photos and videos from the last three days.
Our cache would be like a hash table where ‘key’ would be ‘OwnerID’ and ‘value’ would be a doubly
linked list containing all the tweets from that user in the past three days. Since we want to retrieve the
most recent data first, we can always insert new tweets at the head of the linked list, which means all
the older tweets will be near the tail of the linked list. Therefore, we can remove tweets from the tail to
make space for newer tweets.
9. Timeline Generation
For a detailed discussion about timeline generation, take a look at Designing Facebook’s Newsfeed.
10. Replication and Fault Tolerance
Since our system is read-heavy, we can have multiple secondary database servers for each DB partition.
Secondary servers will be used for read traffic only. All writes will first go to the primary server and
then will be replicated to secondary servers. This scheme will also give us fault tolerance, since
whenever the primary server goes down we can failover to a secondary server.
11. Load Balancing
We can add Load balancing layer at three places in our system 1) Between Clients and Application
servers 2) Between Application servers and database replication servers and 3) Between Aggregation
servers and Cache server. Initially, a simple Round Robin approach can be adopted; that distributes
incoming requests equally among servers. This LB is simple to implement and does not introduce any
overhead. Another benefit of this approach is that if a server is dead, LB will take it out of the rotation
and will stop sending any traffic to it. A problem with Round Robin LB is that it won’t take servers
load into consideration. If a server is overloaded or slow, the LB will not stop sending new requests to
that server. To handle this, a more intelligent LB solution can be placed that periodically queries
backend server about their load and adjusts traffic based on that.
12. Monitoring
Having the ability to monitor our systems is crucial. We should constantly collect data to get an instant
insight into how our system is doing. We can collect following metrics/counters to get an understanding
of the performance of our service:
1. New tweets per day/second, what is the daily peak?
2. Timeline delivery stats, how many tweets per day/second our service is delivering.
3. Average latency that is seen by the user to refresh timeline.
By monitoring these counters, we will realize if we need more replication, load balancing, or caching.
13. Extended Requirements
How do we serve feeds? Get all the latest tweets from the people someone follows and merge/sort
them by time. Use pagination to fetch/show tweets. Only fetch top N tweets from all the people
someone follows. This N will depend on the client’s Viewport, since on a mobile we show fewer tweets
compared to a Web client. We can also cache next top tweets to speed things up.
Alternately, we can pre-generate the feed to improve efficiency; for details please see ‘Ranking and
timeline generation’ under Designing Instagram.
Retweet: With each Tweet object in the database, we can store the ID of the original Tweet and not
store any contents on this retweet object.
Trending Topics: We can cache most frequently occurring hashtags or search queries in the last N
seconds and keep updating them after every M seconds. We can rank trending topics based on the
frequency of tweets or search queries or retweets or likes. We can give more weight to topics which are
shown to more people.
Who to follow? How to give suggestions? This feature will improve user engagement. We can suggest
friends of people someone follows. We can go two or three levels down to find famous people for the
suggestions. We can give preference to people with more followers.
As only a few suggestions can be made at any time, use Machine Learning (ML) to shuffle and reprioritize. ML signals could include people with recently increased follow-ship, common followers if
the other person is following this user, common location or interests, etc.
Moments: Get top news for different websites for past 1 or 2 hours, figure out related tweets, prioritize
them, categorize them (news, support, financial, entertainment, etc.) using ML – supervised learning or
Clustering. Then we can show these articles as trending topics in Moments.
Search: Search involves Indexing, Ranking, and Retrieval of tweets. A similar solution is discussed in
our next problem Design Twitter Search.
Designing Youtube or Netflix
Let's design a video sharing service like Youtube, where users will be able to upload/view/search
videos. Similar Services: netflix.com, vimeo.com, dailymotion.com, veoh.com Difficulty Level:
Medium
1. Why Youtube?
Youtube is one of the most popular video sharing websites in the world. Users of the service can
upload, view, share, rate, and report videos as well as add comments on videos.
2. Requirements and Goals of the System
For the sake of this exercise, we plan to design a simpler version of Youtube with following
requirements:
Functional Requirements:
1.
2.
3.
4.
Users should be able to upload videos.
Users should be able to share and view videos.
Users should be able to perform searches based on video titles.
Our services should be able to record stats of videos, e.g., likes/dislikes, total number of views,
etc.
5. Users should be able to add and view comments on videos.
Non-Functional Requirements:
1. The system should be highly reliable, any video uploaded should not be lost.
2. The system should be highly available. Consistency can take a hit (in the interest of
availability); if a user doesn’t see a video for a while, it should be fine.
3. Users should have a real time experience while watching videos and should not feel any lag.
Not in scope: Video recommendations, most popular videos, channels, subscriptions, watch later,
favorites, etc.
3. Capacity Estimation and Constraints
Let’s assume we have 1.5 billion total users, 800 million of whom are daily active users. If, on average,
a user views five videos per day then the total video-views per second would be:
800M * 5 / 86400 sec => 46K videos/sec
Let’s assume our upload:view ratio is 1:200, i.e., for every video upload we have 200 videos viewed,
giving us 230 videos uploaded per second.
46K / 200 => 230 videos/sec
Storage Estimates: Let’s assume that every minute 500 hours worth of videos are uploaded to
Youtube. If on average, one minute of video needs 50MB of storage (videos need to be stored in
multiple formats), the total storage needed for videos uploaded in a minute would be:
500 hours * 60 min * 50MB => 1500 GB/min (25 GB/sec)
These numbers are estimated with ignoring video compression and replication, which would change
our estimates.
Bandwidth estimates: With 500 hours of video uploads per minute and assuming each video upload
takes a bandwidth of 10MB/min, we would be getting 300GB of uploads every minute.
500 hours * 60 mins * 10MB => 300GB/min (5GB/sec)
Assuming an upload:view ratio of 1:200, we would need 1TB/s outgoing bandwidth.
4. System APIs
We can have SOAP or REST APIs to expose the functionality of our service. The following could be
the definitions of the APIs for uploading and searching videos:
uploadVideo(api_dev_key, video_title, vide_description, tags[], category_id,
default_language,
recording_details, video_contents)
Parameters:
api_dev_key (string): The API developer key of a registered account. This will be used to, among other
things, throttle users based on their allocated quota.
video_title (string): Title of the video.
vide_description (string): Optional description of the video.
tags (string[]): Optional tags for the video.
category_id (string): Category of the video, e.g., Film, Song, People, etc.
default_language (string): For example English, Mandarin, Hindi, etc.
recording_details (string): Location where the video was recorded.
video_contents (stream): Video to be uploaded.
Returns: (string)
A successful upload will return HTTP 202 (request accepted) and once the video encoding is completed
the user is notified through email with a link to access the video. We can also expose a queryable API
to let users know the current status of their uploaded video.
searchVideo(api_dev_key, search_query, user_location, maximum_videos_to_return,
page_token)
Parameters:
api_dev_key (string): The API developer key of a registered account of our service.
search_query (string): A string containing the search terms.
user_location (string): Optional location of the user performing the search.
maximum_videos_to_return (number): Maximum number of results returned in one request.
page_token (string): This token will specify a page in the result set that should be returned.
Returns: (JSON)
A JSON containing information about the list of video resources matching the search query. Each video
resource will have a video title, a thumbnail, a video creation date, and a view count.
streamVideo(api_dev_key, video_id, offset, codec, resolution)
Parameters:
api_dev_key (string): The API developer key of a registered account of our service.
video_id (string): A string to identify the video.
offset (number): We should be able to stream video from any offset; this offset would be a time in
seconds from the beginning of the video. If we support playing/pausing a video from multiple devices,
we will need to store the offset on the server. This will enable the users to start watching a video on any
device from the same point where they left off.
codec (string) & resolution(string): We should send the codec and resolution info in the API from the
client to support play/pause from multiple devices. Imagine you are watching a video on your TV’s
Netflix app, paused it, and started watching it on your phone’s Netflix app. In this case, you would need
codec and resolution, as both these devices have a different resolution and use a different codec.
Returns: (STREAM)
A media stream (a video chunk) from the given offset.
5. High Level Design
At a high-level we would need the following components:
1. Processing Queue: Each uploaded video will be pushed to a processing queue to be de-queued
later for encoding, thumbnail generation, and storage.
2. Encoder: To encode each uploaded video into multiple formats.
3. Thumbnails generator: To generate a few thumbnails for each video.
4. Video and Thumbnail storage: To store video and thumbnail files in some distributed file
storage.
5. User Database: To store user’s information, e.g., name, email, address, etc.
6. Video metadata storage: A metadata database to store all the information about videos like
title, file path in the system, uploading user, total views, likes, dislikes, etc. It will also be used
to store all the video comments.
High level design of Youtube
6. Database Schema
Video metadata storage - MySql
Videos metadata can be stored in a SQL database. The following information should be stored with
each video:
•
•
•
•
•
•
•
•
•
VideoID
Title
Description
Size
Thumbnail
Uploader/User
Total number of likes
Total number of dislikes
Total number of views
For each video comment, we need to store following information:
•
•
•
•
•
CommentID
VideoID
UserID
Comment
TimeOfCreation
User data storage - MySql
• UserID, Name, email, address, age, registration details etc.
7. Detailed Component Design
The service would be read-heavy, so we will focus on building a system that can retrieve videos
quickly. We can expect our read:write ratio to be 200:1, which means for every video upload there are
200 video views.
Where would videos be stored? Videos can be stored in a distributed file storage system like HDFS or
GlusterFS.
How should we efficiently manage read traffic? We should segregate our read traffic from write
traffic. Since we will have multiple copies of each video, we can distribute our read traffic on different
servers. For metadata, we can have master-slave configurations where writes will go to master first and
then gets applied at all the slaves. Such configurations can cause some staleness in data, e.g., when a
new video is added, its metadata would be inserted in the master first and before it gets applied at the
slave our slaves would not be able to see it; and therefore it will be returning stale results to the user.
This staleness might be acceptable in our system as it would be very short-lived and the user would be
able to see the new videos after a few milliseconds.
Where would thumbnails be stored? There will be a lot more thumbnails than videos. If we assume
that every video will have five thumbnails, we need to have a very efficient storage system that can
serve a huge read traffic. There will be two consideration before deciding which storage system should
be used for thumbnails:
1. Thumbnails are small files with, say, a maximum 5KB each.
2. Read traffic for thumbnails will be huge compared to videos. Users will be watching one video
at a time, but they might be looking at a page that has 20 thumbnails of other videos.
Let’s evaluate storing all the thumbnails on a disk. Given that we have a huge number of files, we have
to perform a lot of seeks to different locations on the disk to read these files. This is quite inefficient
and will result in higher latencies.
Bigtable can be a reasonable choice here as it combines multiple files into one block to store on the
disk and is very efficient in reading a small amount of data. Both of these are the two most significant
requirements of our service. Keeping hot thumbnails in the cache will also help in improving the
latencies and, given that thumbnails files are small in size, we can easily cache a large number of such
files in memory.
Video Uploads: Since videos could be huge, if while uploading the connection drops we should
support resuming from the same point.
Video Encoding: Newly uploaded videos are stored on the server and a new task is added to the
processing queue to encode the video into multiple formats. Once all the encoding will be completed
the uploader will be notified and the video is made available for view/sharing.
Detailed component design of Youtube
8. Metadata Sharding
Since we have a huge number of new videos every day and our read load is extremely high, therefore,
we need to distribute our data onto multiple machines so that we can perform read/write operations
efficiently. We have many options to shard our data. Let’s go through different strategies of sharding
this data one by one:
Sharding based on UserID: We can try storing all the data for a particular user on one server. While
storing, we can pass the UserID to our hash function which will map the user to a database server
where we will store all the metadata for that user’s videos. While querying for videos of a user, we can
ask our hash function to find the server holding the user’s data and then read it from there. To search
videos by titles we will have to query all servers and each server will return a set of videos. A
centralized server will then aggregate and rank these results before returning them to the user.
This approach has a couple of issues:
1. What if a user becomes popular? There could be a lot of queries on the server holding that user;
this could create a performance bottleneck. This will also affect the overall performance of our
service.
2. Over time, some users can end up storing a lot of videos compared to others. Maintaining a
uniform distribution of growing user data is quite tricky.
To recover from these situations either we have to repartition/redistribute our data or used consistent
hashing to balance the load between servers.
Sharding based on VideoID: Our hash function will map each VideoID to a random server where we
will store that Video’s metadata. To find videos of a user we will query all servers and each server will
return a set of videos. A centralized server will aggregate and rank these results before returning them
to the user. This approach solves our problem of popular users but shifts it to popular videos.
We can further improve our performance by introducing a cache to store hot videos in front of the
database servers.
9. Video Deduplication
With a huge number of users uploading a massive amount of video data our service will have to deal
with widespread video duplication. Duplicate videos often differ in aspect ratios or encodings, can
contain overlays or additional borders, or can be excerpts from a longer original video. The
proliferation of duplicate videos can have an impact on many levels:
1. Data Storage: We could be wasting storage space by keeping multiple copies of the same video.
2. Caching: Duplicate videos would result in degraded cache efficiency by taking up space that
could be used for unique content.
3. Network usage: Duplicate videos will also increase the amount of data that must be sent over
the network to in-network caching systems.
4. Energy consumption: Higher storage, inefficient cache, and network usage could result in
energy wastage.
For the end user, these inefficiencies will be realized in the form of duplicate search results, longer
video startup times, and interrupted streaming.
For our service, deduplication makes most sense early; when a user is uploading a video as compared
to post-processing it to find duplicate videos later. Inline deduplication will save us a lot of resources
that can be used to encode, transfer, and store the duplicate copy of the video. As soon as any user starts
uploading a video, our service can run video matching algorithms (e.g., Block Matching, Phase
Correlation, etc.) to find duplications. If we already have a copy of the video being uploaded, we can
either stop the upload and use the existing copy or continue the upload and use the newly uploaded
video if it is of higher quality. If the newly uploaded video is a subpart of an existing video or, vice
versa, we can intelligently divide the video into smaller chunks so that we only upload the parts that are
missing.
10. Load Balancing
We should use Consistent Hashing among our cache servers, which will also help in balancing the load
between cache servers. Since we will be using a static hash-based scheme to map videos to hostnames
it can lead to an uneven load on the logical replicas due to the different popularity of each video. For
instance, if a video becomes popular, the logical replica corresponding to that video will experience
more traffic than other servers. These uneven loads for logical replicas can then translate into uneven
load distribution on corresponding physical servers. To resolve this issue any busy server in one
location can redirect a client to a less busy server in the same cache location. We can use dynamic
HTTP redirections for this scenario.
However, the use of redirections also has its drawbacks. First, since our service tries to load balance
locally, it leads to multiple redirections if the host that receives the redirection can’t serve the video.
Also, each redirection requires a client to make an additional HTTP request; it also leads to higher
delays before the video starts playing back. Moreover, inter-tier (or cross data-center) redirections lead
a client to a distant cache location because the higher tier caches are only present at a small number of
locations.
11. Cache
To serve globally distributed users, our service needs a massive-scale video delivery system. Our
service should push its content closer to the user using a large number of geographically distributed
video cache servers. We need to have a strategy that will maximize user performance and also evenly
distributes the load on its cache servers.
We can introduce a cache for metadata servers to cache hot database rows. Using Memcache to cache
the data and Application servers before hitting database can quickly check if the cache has the desired
rows. Least Recently Used (LRU) can be a reasonable cache eviction policy for our system. Under this
policy, we discard the least recently viewed row first.
How can we build more intelligent cache? If we go with 80-20 rule, i.e., 20% of daily read volume
for videos is generating 80% of traffic, meaning that certain videos are so popular that the majority of
people view them; it follows that we can try caching 20% of daily read volume of videos and metadata.
12. Content Delivery Network (CDN)
A CDN is a system of distributed servers that deliver web content to a user based in the geographic
locations of the user, the origin of the web page and a content delivery server. Take a look at ‘CDN’
section in our Caching chapter.
Our service can move popular videos to CDNs:
• CDNs replicate content in multiple places. There’s a better chance of videos being closer to the
user and, with fewer hops, videos will stream from a friendlier network.
• CDN machines make heavy use of caching and can mostly serve videos out of memory.
Less popular videos (1-20 views per day) that are not cached by CDNs can be served by our servers in
various data centers.
13. Fault Tolerance
We should use Consistent Hashing for distribution among database servers. Consistent hashing will not
only help in replacing a dead server, but also help in distributing load among servers.
Designing Typeahead Suggestion
Let's design a real-time suggestion service, which will recommend terms to users as they enter text for
searching. Similar Services: Auto-suggestions, Typeahead search Difficulty: Medium
1. What is Typeahead Suggestion?
Typeahead suggestions enable users to search for known and frequently searched terms. As the user
types into the search box, it tries to predict the query based on the characters the user has entered and
gives a list of suggestions to complete the query. Typeahead suggestions help the user to articulate their
search queries better. It’s not about speeding up the search process but rather about guiding the users
and lending them a helping hand in constructing their search query.
2. Requirements and Goals of the System
Functional Requirements: As the user types in their query, our service should suggest top 10 terms
starting with whatever the user has typed.
Non-function Requirements: The suggestions should appear in real-time. The user should be able to
see the suggestions within 200ms.
3. Basic System Design and Algorithm
The problem we are solving is that we have a lot of ‘strings’ that we need to store in such a way that
users can search with any prefix. Our service will suggest next terms that will match the given prefix.
For example, if our database contains the following terms: cap, cat, captain, or capital and the user has
typed in ‘cap’, our system should suggest ‘cap’, ‘captain’ and ‘capital’.
Since we’ve got to serve a lot of queries with minimum latency, we need to come up with a scheme that
can efficiently store our data such that it can be queried quickly. We can’t depend upon some database
for this; we need to store our index in memory in a highly efficient data structure.
One of the most appropriate data structures that can serve our purpose is the Trie (pronounced “try”). A
trie is a tree-like data structure used to store phrases where each node stores a character of the phrase in
a sequential manner. For example, if we need to store ‘cap, cat, caption, captain, capital’ in the trie, it
would look like:
Now if the user has typed ‘cap’, our service can traverse the trie to go to the node ‘P’ to find all the
terms that start with this prefix (e.g., cap-tion, cap-ital etc).
We can merge nodes that have only one branch to save storage space. The above trie can be stored like
this:
Should we have case insensitive trie? For simplicity and search use-case, let’s assume our data is case
insensitive.
How to find top suggestion? Now that we can find all the terms given a prefix, how can we know
what the top 10 terms are that we should suggest? One simple solution could be to store the count of
searches that terminated at each node, e.g., if users have searched about ‘CAPTAIN’ 100 times and
‘CAPTION’ 500 times, we can store this number with the last character of the phrase. So now if the
user has typed ‘CAP’ we know the top most searched word under the prefix ‘CAP’ is ‘CAPTION’. So,
given a prefix, we can traverse the sub-tree under it to find the top suggestions.
Given a prefix, how much time will it take to traverse its sub-tree? Given the amount of data we
need to index, we should expect a huge tree. Even traversing a sub-tree would take really long, e.g., the
phrase ‘system design interview questions’ is 30 levels deep. Since we have very strict latency
requirements we do need to improve the efficiency of our solution.
Can we store top suggestions with each node? This can surely speed up our searches but will require
a lot of extra storage. We can store top 10 suggestions at each node that we can return to the user. We
have to bear the big increase in our storage capacity to achieve the required efficiency.
We can optimize our storage by storing only references of the terminal nodes rather than storing the
entire phrase. To find the suggested terms we need to traverse back using the parent reference from the
terminal node. We will also need to store the frequency with each reference to keep track of top
suggestions.
How would we build this trie? We can efficiently build our trie bottom up. Each parent node will
recursively call all the child nodes to calculate their top suggestions and their counts. Parent nodes will
combine top suggestions from all of their children to determine their top suggestions.
How to update the trie? Assuming five billion searches every day, which would give us
approximately 60K queries per second. If we try to update our trie for every query it’ll be extremely
resource intensive and this can hamper our read requests, too. One solution to handle this could be to
update our trie offline after a certain interval.
As the new queries come in we can log them and also track their frequencies. Either we can log every
query or do sampling and log every 1000th query. For example, if we don’t want to show a term which
is searched for less than 1000 times, it’s safe to log every 1000th searched term.
We can have a Map-Reduce (MR) set-up to process all the logging data periodically say every hour.
These MR jobs will calculate frequencies of all searched terms in the past hour. We can then update our
trie with this new data. We can take the current snapshot of the trie and update it with all the new terms
and their frequencies. We should do this offline as we don’t want our read queries to be blocked by
update trie requests. We can have two options:
1. We can make a copy of the trie on each server to update it offline. Once done we can switch to
start using it and discard the old one.
2. Another option is we can have a master-slave configuration for each trie server. We can update
slave while the master is serving traffic. Once the update is complete, we can make the slave our
new master. We can later update our old master, which can then start serving traffic, too.
How can we update the frequencies of typeahead suggestions? Since we are storing frequencies of
our typeahead suggestions with each node, we need to update them too. We can update only differences
in frequencies rather than recounting all search terms from scratch. If we’re keeping count of all the
terms searched in last 10 days, we’ll need to subtract the counts from the time period no longer
included and add the counts for the new time period being included. We can add and subtract
frequencies based on Exponential Moving Average (EMA) of each term. In EMA, we give more weight
to the latest data. It’s also known as the exponentially weighted moving average.
After inserting a new term in the trie, we’ll go to the terminal node of the phrase and increase its
frequency. Since we’re storing the top 10 queries in each node, it is possible that this particular search
term jumped into the top 10 queries of a few other nodes. So, we need to update the top 10 queries of
those nodes then. We have to traverse back from the node to all the way up to the root. For every
parent, we check if the current query is part of the top 10. If so, we update the corresponding frequency.
If not, we check if the current query’s frequency is high enough to be a part of the top 10. If so, we
insert this new term and remove the term with the lowest frequency.
How can we remove a term from the trie? Let’s say we have to remove a term from the trie because
of some legal issue or hate or piracy etc. We can completely remove such terms from the trie when the
regular update happens, meanwhile, we can add a filtering layer on each server which will remove any
such term before sending them to users.
What could be different ranking criteria for suggestions? In addition to a simple count, for terms
ranking, we have to consider other factors too, e.g., freshness, user location, language, demographics,
personal history etc.
4. Permanent Storage of the Trie
How to store trie in a file so that we can rebuild our trie easily - this will be needed when a
machine restarts? We can take a snapshot of our trie periodically and store it in a file. This will enable
us to rebuild a trie if the server goes down. To store, we can start with the root node and save the trie
level-by-level. With each node, we can store what character it contains and how many children it has.
Right after each node, we should put all of its children. Let’s assume we have the following trie:
If we store this trie in a file with the above-mentioned scheme, we will have: “C2,A2,R1,T,P,O1,D”.
From this, we can easily rebuild our trie.
If you’ve noticed, we are not storing top suggestions and their counts with each node. It is hard to store
this information; as our trie is being stored top down, we don’t have child nodes created before the
parent, so there is no easy way to store their references. For this, we have to recalculate all the top
terms with counts. This can be done while we are building the trie. Each node will calculate its top
suggestions and pass it to its parent. Each parent node will merge results from all of its children to
figure out its top suggestions.
5. Scale Estimation
If we are building a service that has the same scale as that of Google we can expect 5 billion searches
every day, which would give us approximately 60K queries per second.
Since there will be a lot of duplicates in 5 billion queries, we can assume that only 20% of these will be
unique. If we only want to index the top 50% of the search terms, we can get rid of a lot of less
frequently searched queries. Let’s assume we will have 100 million unique terms for which we want to
build an index.
Storage Estimation: If on the average each query consists of 3 words and if the average length of a
word is 5 characters, this will give us 15 characters of average query size. Assuming we need 2 bytes to
store a character, we will need 30 bytes to store an average query. So total storage we will need:
100 million * 30 bytes => 3 GB
We can expect some growth in this data every day, but we should also be removing some terms that are
not searched anymore. If we assume we have 2% new queries every day and if we are maintaining our
index for the last one year, total storage we should expect:
3GB + (0.02 * 3 GB * 365 days) => 25 GB
6. Data Partition
Although our index can easily fit on one server, we can still partition it in order to meet our
requirements of higher efficiency and lower latencies. How can we efficiently partition our data to
distribute it onto multiple servers?
a. Range Based Partitioning: What if we store our phrases in separate partitions based on their first
letter. So we save all the terms starting with the letter ‘A’ in one partition and those that start with the
letter ‘B’ into another partition and so on. We can even combine certain less frequently occurring letters
into one database partition. We should come up with this partitioning scheme statically so that we can
always store and search terms in a predictable manner.
The main problem with this approach is that it can lead to unbalanced servers, for instance, if we decide
to put all terms starting with the letter ‘E’ into a DB partition, but later we realize that we have too
many terms that start with letter ‘E’ that we can’t fit into one DB partition.
We can see that the above problem will happen with every statically defined scheme. It is not possible
to calculate if each of our partitions will fit on one server statically.
b. Partition based on the maximum capacity of the server: Let’s say we partition our trie based on
the maximum memory capacity of the servers. We can keep storing data on a server as long as it has
memory available. Whenever a sub-tree cannot fit into a server, we break our partition there to assign
that range to this server and move on the next server to repeat this process. Let’s say if our first trie
server can store all terms from ‘A’ to ‘AABC’, which mean our next server will store from ‘AABD’
onwards. If our second server could store up to ‘BXA’, the next server will start from ‘BXB’, and so
on. We can keep a hash table to quickly access this partitioning scheme:
Server 1, A-AABC
Server 2, AABD-BXA
Server 3, BXB-CDA
For querying, if the user has typed ‘A’ we have to query both server 1 and 2 to find the top suggestions.
When the user has typed ‘AA’, we still have to query server 1 and 2, but when the user has typed
‘AAA’ we only need to query server 1.
We can have a load balancer in front of our trie servers which can store this mapping and redirect
traffic. Also, if we are querying from multiple servers, either we need to merge the results at the server
side to calculate overall top results or make our clients do that. If we prefer to do this on the server side,
we need to introduce another layer of servers between load balancers and trie severs (let’s call them
aggregator). These servers will aggregate results from multiple trie servers and return the top results to
the client.
Partitioning based on the maximum capacity can still lead us to hotspots, e.g., if there are a lot of
queries for terms starting with ‘cap’, the server holding it will have a high load compared to others.
c. Partition based on the hash of the term: Each term will be passed to a hash function, which will
generate a server number and we will store the term on that server. This will make our term distribution
random and hence minimize hotspots. To find typeahead suggestions for a term we have to ask all the
servers and then aggregate the results.
7. Cache
We should realize that caching the top searched terms will be extremely helpful in our service. There
will be a small percentage of queries that will be responsible for most of the traffic. We can have
separate cache servers in front of the trie servers holding most frequently searched terms and their
typeahead suggestions. Application servers should check these cache servers before hitting the trie
servers to see if they have the desired searched terms.
We can also build a simple Machine Learning (ML) model that can try to predict the engagement on
each suggestion based on simple counting, personalization, or trending data etc., and cache these terms.
8. Replication and Load Balancer
We should have replicas for our trie servers both for load balancing and also for fault tolerance. We
also need a load balancer that keeps track of our data partitioning scheme and redirects traffic based on
the prefixes.
9. Fault Tolerance
What will happen when a trie server goes down? As discussed above we can have a master-slave
configuration; if the master dies, the slave can take over after failover. Any server that comes back up,
can rebuild the trie based on the last snapshot.
10. Typeahead Client
We can perform the following optimizations on the client to improve user’s experience:
1. The client should only try hitting the server if the user has not pressed any key for 50ms.
2.
3.
4.
5.
If the user is constantly typing, the client can cancel the in-progress requests.
Initially, the client can wait until the user enters a couple of characters.
Clients can pre-fetch some data from the server to save future requests.
Clients can store the recent history of suggestions locally. Recent history has a very high rate of
being reused.
6. Establishing an early connection with the server turns out to be one of the most important
factors. As soon as the user opens the search engine website, the client can open a connection
with the server. So when a user types in the first character, the client doesn’t waste time in
establishing the connection.
7. The server can push some part of their cache to CDNs and Internet Service Providers (ISPs) for
efficiency.
11. Personalization
Users will receive some typeahead suggestions based on their historical searches, location, language,
etc. We can store the personal history of each user separately on the server and cache them on the client
too. The server can add these personalized terms in the final set before sending it to the user.
Personalized searches should always come before others.
Designing an API Rate Limiter
Let's design an API Rate Limiter which will throttle users based upon the number of the requests they
are sending. Difficulty Level: Medium
1. What is a Rate Limiter?
Imagine we have a service which is receiving a huge number of requests, but it can only serve a limited
number of requests per second. To handle this problem we would need some kind of throttling or rate
limiting mechanism that would allow only a certain number of requests so our service can respond to
all of them. A rate limiter, at a high-level, limits the number of events an entity (user, device, IP, etc.)
can perform in a particular time window. For example:
• A user can send only one message per second.
• A user is allowed only three failed credit card transactions per day.
• A single IP can only create twenty accounts per day.
In general, a rate limiter caps how many requests a sender can issue in a specific time window. It then
blocks requests once the cap is reached.
2. Why do we need API rate limiting?
Rate Limiting helps to protect services against abusive behaviors targeting the application layer like
Denial-of-service (DOS) attacks, brute-force password attempts, brute-force credit card transactions,
etc. These attacks are usually a barrage of HTTP/S requests which may look like they are coming from
real users, but are typically generated by machines (or bots). As a result, these attacks are often harder
to detect and can more easily bring down a service, application, or an API.
Rate limiting is also used to prevent revenue loss, to reduce infrastructure costs, to stop spam, and to
stop online harassment. Following is a list of scenarios that can benefit from Rate limiting by making a
service (or API) more reliable:
• Misbehaving clients/scripts: Either intentionally or unintentionally, some entities can
overwhelm a service by sending a large number of requests. Another scenario could be when a
user is sending a lot of lower-priority requests and we want to make sure that it doesn’t affect
the high-priority traffic. For example, users sending a high volume of requests for analytics data
should not be allowed to hamper critical transactions for other users.
• Security: By limiting the number of the second-factor attempts (in 2-factor auth) that the users
are allowed to perform, for example, the number of times they’re allowed to try with a wrong
password.
• To prevent abusive behavior and bad design practices: Without API limits, developers of
client applications would use sloppy development tactics, for example, requesting the same
information over and over again.
• To keep costs and resource usage under control: Services are generally designed for normal
input behavior, for example, a user writing a single post in a minute. Computers could easily
push thousands/second through an API. Rate limiter enables controls on service APIs.
• Revenue: Certain services might want to limit operations based on the tier of their customer’s
service and thus create a revenue model based on rate limiting. There could be default limits for
all the APIs a service offers. To go beyond that, the user has to buy higher limits
• To eliminate spikiness in traffic: Make sure the service stays up for everyone else.
3. Requirements and Goals of the System
Our Rate Limiter should meet the following requirements:
Functional Requirements:
1. Limit the number of requests an entity can send to an API within a time window, e.g., 15
requests per second.
2. The APIs are accessible through a cluster, so the rate limit should be considered across different
servers. The user should get an error message whenever the defined threshold is crossed within
a single server or across a combination of servers.
Non-Functional Requirements:
1. The system should be highly available. The rate limiter should always work since it protects our
service from external attacks.
2. Our rate limiter should not introduce substantial latencies affecting the user experience.
4. How to do Rate Limiting?
Rate Limiting is a process that is used to define the rate and speed at which consumers can access
APIs. Throttling is the process of controlling the usage of the APIs by customers during a given
period. Throttling can be defined at the application level and/or API level. When a throttle limit is
crossed, the server returns HTTP status “429 - Too many requests".
5. What are different types of throttling?
Here are the three famous throttling types that are used by different services:
Hard Throttling: The number of API requests cannot exceed the throttle limit.
Soft Throttling: In this type, we can set the API request limit to exceed a certain percentage. For
example, if we have rate-limit of 100 messages a minute and 10% exceed-limit, our rate limiter will
allow up to 110 messages per minute.
Elastic or Dynamic Throttling: Under Elastic throttling, the number of requests can go beyond the
threshold if the system has some resources available. For example, if a user is allowed only 100
messages a minute, we can let the user send more than 100 messages a minute when there are free
resources available in the system.
6. What are different types of algorithms used for Rate Limiting?
Following are the two types of algorithms used for Rate Limiting:
Fixed Window Algorithm: In this algorithm, the time window is considered from the start of the timeunit to the end of the time-unit. For example, a period would be considered 0-60 seconds for a minute
irrespective of the time frame at which the API request has been made. In the diagram below, there are
two messages between 0-1 second and three messages between 1-2 seconds. If we have a rate limiting
of two messages a second, this algorithm will throttle only ‘m5’.
Fixed Window - 2 messages
0.0s
m1
m2
Fixed Window - 3 messages
1.0s
m3
Rolling Window - 4 messages
m4
m5
2.0s
Rolling Window Algorithm: In this algorithm, the time window is considered from the fraction of the
time at which the request is made plus the time window length. For example, if there are two messages
sent at the 300th millisecond and 400th millisecond of a second, we’ll count them as two messages
from the 300th millisecond of that second up to the 300th millisecond of next second. In the above
diagram, keeping two messages a second, we’ll throttle ‘m3’ and ‘m4’.
7. High level design for Rate Limiter
Rate Limiter will be responsible for deciding which request will be served by the API servers and
which request will be declined. Once a new request arrives, the Web Server first asks the Rate Limiter
to decide if it will be served or throttled. If the request is not throttled, then it’ll be passed to the API
servers.
High level design for Rate Limiter
8. Basic System Design and Algorithm
Let’s take the example where we want to limit the number of requests per user. Under this scenario, for
each unique user, we would keep a count representing how many requests the user has made and a
timestamp when we started counting the requests. We can keep it in a hashtable, where the ‘key’ would
be the ‘UserID’ and ‘value’ would be a structure containing an integer for the ‘Count’ and an integer for
the Epoch time:
Key : Value
E.g.,
UserID
<span>{
:
Count, StartTime }</sp
<span>{
Kristie : 3, 1499818564 }</s
Let’s assume our rate limiter is allowing three requests per minute per user, so whenever a new request
comes in, our rate limiter will perform the following steps:
1. If the ‘UserID’ is not present in the hash-table, insert it, set the ‘Count’ to 1, set ‘StartTime’ to
the current time (normalized to a minute), and allow the request.
2. Otherwise, find the record of the ‘UserID’ and if CurrentTime – StartTime >= 1
min, set the ‘StartTime’ to the current time, ‘Count’ to 1, and allow the request.
3. If CurrentTime - StartTime <= 1 min and
• If ‘Count < 3’, increment the Count and allow the request.
• If ‘Count >= 3’, reject the request.
Rate Limiter allowing three requests per minute for user "Kristie"
Request at 03:00:00 AM
Insert into hashtable
Allow request
"Kristie" : { "Count": 1, "StartTime": 1499828400 }
Request at 03:00:10 AM
Increment Count
Allow request
[Not supported by viewer]
Request at 03:01:05 AM
Reset Count and StartTime
Allow request
"Kristie" : { <font color="#000000">"Count": 1, "StartTime": 1499828460</font> }
Request at 03:01:20 AM
Increment Count
Allow request
[Not supported by viewer]
Request at 03:01:45 AM
Increment Count
Allow request
[Not supported by viewer]
Request at 03:01:50 AM
Reject request
[Not supported by viewer]
What are some of the problems with our algorithm?
1. This is a Fixed Window algorithm since we’re resetting the ‘StartTime’ at the end of every
minute, which means it can potentially allow twice the number of requests per minute. Imagine
if Kristie sends three requests at the last second of a minute, then she can immediately send
three more requests at the very first second of the next minute, resulting in 6 requests in the
span of two seconds. The solution to this problem would be a sliding window algorithm which
we’ll discuss later.
3 Requests
<span>3 Requests</span>
0.0min
1.0min
2.0min
[Not supported
[Not supported
by viewer]
by viewer]
6 Requests
2. Atomicity: In a distributed environment, the “read-and-then-write” behavior can create a race
condition. Imagine if Kristie’s current ‘Count’ is “2” and that she issues two more requests. If
two separate processes served each of these requests and concurrently read the Count before
either of them updated it, each process would think that Kristie could have one more request
and that she had not hit the rate limit.
Time
[Not supported by viewer]
[Not supported by viewer]
If we are using Redis to store our key-value, one solution to resolve the atomicity problem is to use
Redis lock for the duration of the read-update operation. This, however, would come at the expense of
slowing down concurrent requests from the same user and introducing another layer of complexity. We
can use Memcached, but it would have comparable complications.
If we are using a simple hash-table, we can have a custom implementation for ‘locking’ each record to
solve our atomicity problems.
How much memory would we need to store all of the user data? Let’s assume the simple solution
where we are keeping all of the data in a hash-table.
Let’s assume ‘UserID’ takes 8 bytes. Let’s also assume a 2 byte ‘Count’, which can count up to 65k, is
sufficient for our use case. Although epoch time will need 4 bytes, we can choose to store only the
minute and second part, which can fit into 2 bytes. Hence, we need a total of 12 bytes to store a user’s
data:
8 + 2 + 2 = 12 bytes
Let’s assume our hash-table has an overhead of 20 bytes for each record. If we need to track one
million users at any time, the total memory we would need would be 32MB:
(12 + 20) bytes * 1 million => 32MB
If we assume that we would need a 4-byte number to lock each user’s record to resolve our atomicity
problems, we would require a total 36MB memory.
This can easily fit on a single server; however we would not like to route all of our traffic through a
single machine. Also, if we assume a rate limit of 10 requests per second, this would translate into 10
million QPS for our rate limiter! This would be too much for a single server. Practically, we can assume
we would use a Redis or Memcached kind of a solution in a distributed setup. We’ll be storing all the
data in the remote Redis servers and all the Rate Limiter servers will read (and update) these servers
before serving or throttling any request.
9. Sliding Window algorithm
We can maintain a sliding window if we can keep track of each request per user. We can store the
timestamp of each request in a Redis Sorted Set in our ‘value’ field of hash-table.
Key : Value
E.g.,
<span>{
UserID : Sorted Set <UnixTime> }</span>
<span>{ 1499818000,
Kristie :  </span>1499818500, 1499818860 <span>}</span>
Let’s assume our rate limiter is allowing three requests per minute per user, so, whenever a new request
comes in, the Rate Limiter will perform following steps:
1. Remove all the timestamps from the Sorted Set that are older than “CurrentTime - 1 minute”.
2. Count the total number of elements in the sorted set. Reject the request if this count is greater
than our throttling limit of “3”.
3. Insert the current time in the sorted set and accept the request.
Rate Limiter allowing three requests per minute for user "Kristie"
Request at 03:00:00 AM
Insert into hashtable
Allow request
"Kristie" : { 1499828400 }
Request at 03:01:05 AM
Remove old timestamps and insert the current time
Allow request
[Not supported by viewer]
Request at 03:01:20 AM
Insert the current time
Allow request
[Not supported by viewer]
Request at 03:01:45 AM
Insert the current time
Allow request
[Not supported by viewer]
Request at 03:01:50 AM
Reject request
<font color="#ffffff">"Kristie" : { 1499828465, 1499828480,1499828505 }</font><br>
Request at 03:02:10 AM
Remove old timestamps and insert the current time
Allow request
[Not supported by viewer]
How much memory would we need to store all of the user data for sliding window? Let’s assume
‘UserID’ takes 8 bytes. Each epoch time will require 4 bytes. Let’s suppose we need a rate limiting of
500 requests per hour. Let’s assume 20 bytes overhead for hash-table and 20 bytes overhead for the
Sorted Set. At max, we would need a total of 12KB to store one user’s data:
8 + (4 + 20 (sorted set overhead)) * 500 + 20 (hash-table overhead) = 12KB
Here we are reserving 20 bytes overhead per element. In a sorted set, we can assume that we need at
least two pointers to maintain order among elements — one pointer to the previous element and one to
the next element. On a 64bit machine, each pointer will cost 8 bytes. So we will need 16 bytes for
pointers. We added an extra word (4 bytes) for storing other overhead.
If we need to track one million users at any time, total memory we would need would be 12GB:
12KB * 1 million ~= 12GB
Sliding Window Algorithm takes a lot of memory compared to the Fixed Window; this would be a
scalability issue. What if we can combine the above two algorithms to optimize our memory usage?
10. Sliding Window with Counters
What if we keep track of request counts for each user using multiple fixed time windows, e.g., 1/60th
the size of our rate limit’s time window. For example, if we have an hourly rate limit we can keep a
count for each minute and calculate the sum of all counters in the past hour when we receive a new
request to calculate the throttling limit. This would reduce our memory footprint. Let’s take an example
where we rate-limit at 500 requests per hour with an additional limit of 10 requests per minute. This
means that when the sum of the counters with timestamps in the past hour exceeds the request
threshold (500), Kristie has exceeded the rate limit. In addition to that, she can’t send more than ten
requests per minute. This would be a reasonable and practical consideration, as none of the real users
would send frequent requests. Even if they do, they will see success with retries since their limits get
reset every minute.
We can store our counters in a Redis Hash since it offers incredibly efficient storage for fewer than 100
keys. When each request increments a counter in the hash, it also sets the hash to expire an hour later.
We will normalize each ‘time’ to a minute.
Rate Limiter allowing three requests per minute for user "Kristie"
Request at 03:00:00 AM
Insert into hashtable
Allow request
"Kristie" : { 1499828400: 1 }
Request at 03:01:05 AM
Insert another timestamp
Allow request
[Not supported by viewer]
Request at 03:01:20 AM
Increment counter for current timestamp
Allow request
[Not supported by viewer]
Request at 03:01:45 AM
Increment counter for current timestamp
Allow request
[Not supported by viewer]
Request at 03:01:50 AM
Reject request
[Not supported by viewer]
Request at 04:01:00 AM
Remove old timestamps and insert the current time
Allow request
[Not supported by viewer]
How much memory we would need to store all the user data for sliding window with counters?
Let’s assume ‘UserID’ takes 8 bytes. Each epoch time will need 4 bytes, and the Counter would need 2
bytes. Let’s suppose we need a rate limiting of 500 requests per hour. Assume 20 bytes overhead for
hash-table and 20 bytes for Redis hash. Since we’ll keep a count for each minute, at max, we would
need 60 entries for each user. We would need a total of 1.6KB to store one user’s data:
8 + (4 + 2 + 20 (Redis hash overhead)) * 60 + 20 (hash-table overhead) = 1.6KB
If we need to track one million users at any time, total memory we would need would be 1.6GB:
1.6KB * 1 million ~= 1.6GB
So, our ‘Sliding Window with Counters’ algorithm uses 86% less memory than the simple sliding
window algorithm.
11. Data Sharding and Caching
We can shard based on the ‘UserID’ to distribute the user’s data. For fault tolerance and replication we
should use Consistent Hashing. If we want to have different throttling limits for different APIs, we can
choose to shard per user per API. Take the example of URL Shortener; we can have different rate
limiter for createURL() and deleteURL() APIs for each user or IP.
If our APIs are partitioned, a practical consideration could be to have a separate (somewhat smaller)
rate limiter for each API shard as well. Let’s take the example of our URL Shortener where we want to
limit each user not to create more than 100 short URLs per hour. Assuming we are using Hash-Based
Partitioning for our createURL() API, we can rate limit each partition to allow a user to create not
more than three short URLs per minute in addition to 100 short URLs per hour.
Our system can get huge benefits from caching recent active users. Application servers can quickly
check if the cache has the desired record before hitting backend servers. Our rate limiter can
significantly benefit from the Write-back cache by updating all counters and timestamps in cache
only. The write to the permanent storage can be done at fixed intervals. This way we can ensure
minimum latency added to the user’s requests by the rate limiter. The reads can always hit the cache
first; which will be extremely useful once the user has hit their maximum limit and the rate limiter will
only be reading data without any updates.
Least Recently Used (LRU) can be a reasonable cache eviction policy for our system.
12. Should we rate limit by IP or by user?
Let’s discuss the pros and cons of using each one of these schemes:
IP: In this scheme, we throttle requests per-IP; although it’s not optimal in terms of differentiating
between ‘good’ and ‘bad’ actors, it’s still better than not have rate limiting at all. The biggest problem
with IP based throttling is when multiple users share a single public IP like in an internet cafe or
smartphone users that are using the same gateway. One bad user can cause throttling to other users.
Another issue could arise while caching IP-based limits, as there are a huge number of IPv6 addresses
available to a hacker from even one computer, it’s trivial to make a server run out of memory tracking
IPv6 addresses!
User: Rate limiting can be done on APIs after user authentication. Once authenticated, the user will be
provided with a token which the user will pass with each request. This will ensure that we will rate
limit against a particular API that has a valid authentication token. But what if we have to rate limit on
the login API itself? The weakness of this rate-limiting would be that a hacker can perform a denial of
service attack against a user by entering wrong credentials up to the limit; after that the actual user will
not be able to log-in.
How about if we combine the above two schemes?
Hybrid: A right approach could be to do both per-IP and per-user rate limiting, as they both have
weaknesses when implemented alone, though, this will result in more cache entries with more details
per entry, hence requiring more memory and storage.
Designing Twitter Search
Twitter is one of the largest social networking service where users can share photos, news, and textbased messages. In this chapter, we will design a service that can store and search user tweets. Similar
Problems: Tweet search. Difficulty Level: Medium
1. What is Twitter Search?
Twitter users can update their status whenever they like. Each status (called tweet) consists of plain text
and our goal is to design a system that allows searching over all the user tweets.
2. Requirements and Goals of the System
•
•
•
•
•
Let’s assume Twitter has 1.5 billion total users with 800 million daily active users.
On average Twitter gets 400 million tweets every day.
The average size of a tweet is 300 bytes.
Let’s assume there will be 500M searches every day.
The search query will consist of multiple words combined with AND/OR.
We need to design a system that can efficiently store and query tweets.
3. Capacity Estimation and Constraints
Storage Capacity: Since we have 400 million new tweets every day and each tweet on average is 300
bytes, the total storage we need, will be:
400M * 300 => 120GB/day
Total storage per second:
120GB / 24hours / 3600sec ~= 1.38MB/second
4. System APIs
We can have SOAP or REST APIs to expose functionality of our service; following could be the
definition of the search API:
search(api_dev_key, search_terms, maximum_results_to_return, sort, page_token)
Parameters:
api_dev_key (string): The API developer key of a registered account. This will be used to, among other
things, throttle users based on their allocated quota.
search_terms (string): A string containing the search terms.
maximum_results_to_return (number): Number of tweets to return.
sort (number): Optional sort mode: Latest first (0 - default), Best matched (1), Most liked (2).
page_token (string): This token will specify a page in the result set that should be returned.
Returns: (JSON)
A JSON containing information about a list of tweets matching the search query. Each result entry can
have the user ID & name, tweet text, tweet ID, creation time, number of likes, etc.
5. High Level Design
At the high level, we need to store all the statues in a database and also build an index that can keep
track of which word appears in which tweet. This index will help us quickly find tweets that users are
trying to search.
High level design for Twitter search
6. Detailed Component Design
1. Storage: We need to store 120GB of new data every day. Given this huge amount of data, we need
to come up with a data partitioning scheme that will be efficiently distributing the data onto multiple
servers. If we plan for next five years, we will need the following storage:
120GB * 365days * 5years ~= 200TB
If we never want to be more than 80% full at any time, we approximately will need 250TB of total
storage. Let’s assume that we want to keep an extra copy of all tweets for fault tolerance; then, our total
storage requirement will be 500TB. If we assume a modern server can store up to 4TB of data, we
would need 125 such servers to hold all of the required data for the next five years.
Let’s start with a simplistic design where we store the tweets in a MySQL database. We can assume that
we store the tweets in a table having two columns, TweetID and TweetText. Let’s assume we partition
our data based on TweetID. If our TweetIDs are unique system-wide, we can define a hash function that
can map a TweetID to a storage server where we can store that tweet object.
How can we create system-wide unique TweetIDs? If we are getting 400M new tweets each day,
then how many tweet objects we can expect in five years?
400M * 365 days * 5 years => 730 billion
This means we would need a five bytes number to identify TweetIDs uniquely. Let’s assume we have a
service that can generate a unique TweetID whenever we need to store an object (The TweetID
discussed here will be similar to TweetID discussed in Designing Twitter). We can feed the TweetID to
our hash function to find the storage server and store our tweet object there.
2. Index: What should our index look like? Since our tweet queries will consist of words, let’s build the
index that can tell us which word comes in which tweet object. Let’s first estimate how big our index
will be. If we want to build an index for all the English words and some famous nouns like people
names, city names, etc., and if we assume that we have around 300K English words and 200K nouns,
then we will have 500k total words in our index. Let’s assume that the average length of a word is five
characters. If we are keeping our index in memory, we need 2.5MB of memory to store all the words:
500K * 5 => 2.5 MB
Let’s assume that we want to keep the index in memory for all the tweets from only past two years.
Since we will be getting 730B tweets in 5 years, this will give us 292B tweets in two years. Given that
each TweetID will be 5 bytes, how much memory will we need to store all the TweetIDs?
292B * 5 => 1460 GB
So our index would be like a big distributed hash table, where ‘key’ would be the word and ‘value’ will
be a list of TweetIDs of all those tweets which contain that word. Assuming on average we have 40
words in each tweet and since we will not be indexing prepositions and other small words like ‘the’,
‘an’, ‘and’ etc., let’s assume we will have around 15 words in each tweet that need to be indexed. This
means each TweetID will be stored 15 times in our index. So total memory we will need to store our
index:
(1460 * 15) + 2.5MB ~= 21 TB
Assuming a high-end server has 144GB of memory, we would need 152 such servers to hold our index.
We can shard our data based on two criteria:
Sharding based on Words: While building our index, we will iterate through all the words of a tweet
and calculate the hash of each word to find the server where it would be indexed. To find all tweets
containing a specific word we have to query only the server which contains this word.
We have a couple of issues with this approach:
1. What if a word becomes hot? Then there will be a lot of queries on the server holding that word.
This high load will affect the performance of our service.
2. Over time, some words can end up storing a lot of TweetIDs compared to others, therefore,
maintaining a uniform distribution of words while tweets are growing is quite tricky.
To recover from these situations we either have to repartition our data or use Consistent Hashing.
Sharding based on the tweet object: While storing, we will pass the TweetID to our hash function to
find the server and index all the words of the tweet on that server. While querying for a particular word,
we have to query all the servers, and each server will return a set of TweetIDs. A centralized server will
aggregate these results to return them to the user.
Detailed component design
7. Fault Tolerance
What will happen when an index server dies? We can have a secondary replica of each server and if the
primary server dies it can take control after the failover. Both primary and secondary servers will have
the same copy of the index.
What if both primary and secondary servers die at the same time? We have to allocate a new server and
rebuild the same index on it. How can we do that? We don’t know what words/tweets were kept on this
server. If we were using ‘Sharding based on the tweet object’, the brute-force solution would be to
iterate through the whole database and filter TweetIDs using our hash function to figure out all the
required tweets that would be stored on this server. This would be inefficient and also during the time
when the server was being rebuilt we would not be able to serve any query from it, thus missing some
tweets that should have been seen by the user.
How can we efficiently retrieve a mapping between tweets and the index server? We have to build a
reverse index that will map all the TweetID to their index server. Our Index-Builder server can hold this
information. We will need to build a Hashtable where the ‘key’ will be the index server number and the
‘value’ will be a HashSet containing all the TweetIDs being kept at that index server. Notice that we are
keeping all the TweetIDs in a HashSet; this will enable us to add/remove tweets from our index
quickly. So now, whenever an index server has to rebuild itself, it can simply ask the Index-Builder
server for all the tweets it needs to store and then fetch those tweets to build the index. This approach
will surely be fast. We should also have a replica of the Index-Builder server for fault tolerance.
8. Cache
To deal with hot tweets we can introduce a cache in front of our database. We can use Memcached,
which can store all such hot tweets in memory. Application servers, before hitting the backend
database, can quickly check if the cache has that tweet. Based on clients’ usage patterns, we can adjust
how many cache servers we need. For cache eviction policy, Least Recently Used (LRU) seems
suitable for our system.
9. Load Balancing
We can add a load balancing layer at two places in our system 1) Between Clients and Application
servers and 2) Between Application servers and Backend server. Initially, a simple Round Robin
approach can be adopted; that distributes incoming requests equally among backend servers. This LB is
simple to implement and does not introduce any overhead. Another benefit of this approach is LB will
take dead servers out of the rotation and will stop sending any traffic to it. A problem with Round
Robin LB is it won’t take server load into consideration. If a server is overloaded or slow, the LB will
not stop sending new requests to that server. To handle this, a more intelligent LB solution can be
placed that periodically queries the backend server about their load and adjust traffic based on that.
10. Ranking
How about if we want to rank the search results by social graph distance, popularity, relevance, etc?
Let’s assume we want to rank tweets by popularity, like how many likes or comments a tweet is getting,
etc. In such a case, our ranking algorithm can calculate a ‘popularity number’ (based on the number of
likes etc.) and store it with the index. Each partition can sort the results based on this popularity number
before returning results to the aggregator server. The aggregator server combines all these results, sorts
them based on the popularity number, and sends the top results to the user.
Designing a Web Crawler
Let's design a Web Crawler that will systematically browse and download the World Wide Web. Web
crawlers are also known as web spiders, robots, worms, walkers, and bots. Difficulty Level: Hard
1. What is a Web Crawler?
A web crawler is a software program which browses the World Wide Web in a methodical and
automated manner. It collects documents by recursively fetching links from a set of starting pages.
Many sites, particularly search engines, use web crawling as a means of providing up-to-date data.
Search engines download all the pages to create an index on them to perform faster searches.
Some other uses of web crawlers are:
•
•
•
•
•
To test web pages and links for valid syntax and structure.
To monitor sites to see when their structure or contents change.
To maintain mirror sites for popular Web sites.
To search for copyright infringements.
To build a special-purpose index, e.g., one that has some understanding of the content stored in
multimedia files on the Web.
2. Requirements and Goals of the System
Let’s assume we need to crawl all the web.
Scalability: Our service needs to be scalable such that it can crawl the entire Web and can be used to
fetch hundreds of millions of Web documents.
Extensibility: Our service should be designed in a modular way with the expectation that new
functionality will be added to it. There could be newer document types that needs to be downloaded
and processed in the future.
3. Some Design Considerations
Crawling the web is a complex task, and there are many ways to go about it. We should be asking a few
questions before going any further:
Is it a crawler for HTML pages only? Or should we fetch and store other types of media, such as
sound files, images, videos, etc.? This is important because the answer can change the design. If we
are writing a general-purpose crawler to download different media types, we might want to break down
the parsing module into different sets of modules: one for HTML, another for images, or another for
videos, where each module extracts what is considered interesting for that media type.
Let’s assume for now that our crawler is going to deal with HTML only, but it should be extensible and
make it easy to add support for new media types.
What protocols are we looking at? HTTP? What about FTP links? What different protocols
should our crawler handle? For the sake of the exercise, we will assume HTTP. Again, it shouldn’t be
hard to extend the design to use FTP and other protocols later.
What is the expected number of pages we will crawl? How big will the URL database become?
Let’s assume we need to crawl one billion websites. Since a website can contain many, many URLs,
let’s assume an upper bound of 15 billion different web pages that will be reached by our crawler.
What is ‘RobotsExclusion’ and how should we deal with it? Courteous Web crawlers implement the
Robots Exclusion Protocol, which allows Webmasters to declare parts of their sites off limits to
crawlers. The Robots Exclusion Protocol requires a Web crawler to fetch a special document called
robot.txt which contains these declarations from a Web site before downloading any real content from
it.
4. Capacity Estimation and Constraints
If we want to crawl 15 billion pages within four weeks, how many pages do we need to fetch per
second?
15B / (4 weeks * 7 days * 86400 sec) ~= 6200 pages/sec
What about storage? Page sizes vary a lot, but, as mentioned above since, we will be dealing with
HTML text only, let’s assume an average page size of 100KB. With each page, if we are storing 500
bytes of metadata, total storage we would need:
15B * (100KB + 500) ~= 1.5 petabytes
Assuming a 70% capacity model (we don’t want to go above 70% of the total capacity of our storage
system), total storage we will need:
1.5 petabytes / 0.7 ~= 2.14 petabytes
5. High Level design
The basic algorithm executed by any Web crawler is to take a list of seed URLs as its input and
repeatedly execute the following steps.
1.
2.
3.
4.
5.
6.
7.
Pick a URL from the unvisited URL list.
Determine the IP Address of its host-name.
Establish a connection to the host to download the corresponding document.
Parse the document contents to look for new URLs.
Add the new URLs to the list of unvisited URLs.
Process the downloaded document, e.g., store it or index its contents, etc.
Go back to step 1
How to crawl?
Breadth first or depth first? Breadth-first search (BFS) is usually used. However, Depth First Search
(DFS) is also utilized in some situations, such as, if your crawler has already established a connection
with the website, it might just DFS all the URLs within this website to save some handshaking
overhead.
Path-ascending crawling: Path-ascending crawling can help discover a lot of isolated resources or
resources for which no inbound link would have been found in regular crawling of a particular Web
site. In this scheme, a crawler would ascend to every path in each URL that it intends to crawl. For
example, when given a seed URL of http://foo.com/a/b/page.html, it will attempt to crawl /a/b/, /a/, and
/.
Difficulties in implementing efficient web crawler
There are two important characteristics of the Web that makes Web crawling a very difficult task:
1. Large volume of Web pages: A large volume of web pages implies that web crawler can only
download a fraction of the web pages at any time and hence it is critical that web crawler should be
intelligent enough to prioritize download.
2. Rate of change on web pages. Another problem with today’s dynamic world is that web pages on
the internet change very frequently. As a result, by the time the crawler is downloading the last page
from a site, the page may change, or a new page may be added to the site.
A bare minimum crawler needs at least these components:
1. URL frontier: To store the list of URLs to download and also prioritize which URLs should be
crawled first.
2. HTTP Fetcher: To retrieve a web page from the server.
3. Extractor: To extract links from HTML documents.
4. Duplicate Eliminator: To make sure the same content is not extracted twice unintentionally.
5. Datastore: To store retrieved pages, URLs, and other metadata.
6. Detailed Component Design
Let’s assume our crawler is running on one server and all the crawling is done by multiple working
threads where each working thread performs all the steps needed to download and process a document
in a loop.
The first step of this loop is to remove an absolute URL from the shared URL frontier for downloading.
An absolute URL begins with a scheme (e.g., “HTTP”) which identifies the network protocol that
should be used to download it. We can implement these protocols in a modular way for extensibility, so
that later if our crawler needs to support more protocols, it can be easily done. Based on the URL’s
scheme, the worker calls the appropriate protocol module to download the document. After
downloading, the document is placed into a Document Input Stream (DIS). Putting documents into DIS
will enable other modules to re-read the document multiple times.
Once the document has been written to the DIS, the worker thread invokes the dedupe test to determine
whether this document (associated with a different URL) has been seen before. If so, the document is
not processed any further and the worker thread removes the next URL from the frontier.
Next, our crawler needs to process the downloaded document. Each document can have a different
MIME type like HTML page, Image, Video, etc. We can implement these MIME schemes in a modular
way, so that later if our crawler needs to support more types, we can easily implement them. Based on
the downloaded document’s MIME type, the worker invokes the process method of each processing
module associated with that MIME type.
Furthermore, our HTML processing module will extract all links from the page. Each link is converted
into an absolute URL and tested against a user-supplied URL filter to determine if it should be
downloaded. If the URL passes the filter, the worker performs the URL-seen test, which checks if the
URL has been seen before, namely, if it is in the URL frontier or has already been downloaded. If the
URL is new, it is added to the frontier.
Let’s discuss these components one by one, and see how they can be distributed onto multiple
machines:
1. The URL frontier: The URL frontier is the data structure that contains all the URLs that remain to
be downloaded. We can crawl by performing a breadth-first traversal of the Web, starting from the
pages in the seed set. Such traversals are easily implemented by using a FIFO queue.
Since we’ll be having a huge list of URLs to crawl, we can distribute our URL frontier into multiple
servers. Let’s assume on each server we have multiple worker threads performing the crawling tasks.
Let’s also assume that our hash function maps each URL to a server which will be responsible for
crawling it.
Following politeness requirements must be kept in mind while designing a distributed URL frontier:
1. Our crawler should not overload a server by downloading a lot of pages from it.
2. We should not have multiple machines connecting a web server.
To implement this politeness constraint our crawler can have a collection of distinct FIFO sub-queues
on each server. Each worker thread will have its separate sub-queue, from which it removes URLs for
crawling. When a new URL needs to be added, the FIFO sub-queue in which it is placed will be
determined by the URL’s canonical hostname. Our hash function can map each hostname to a thread
number. Together, these two points imply that, at most, one worker thread will download documents
from a given Web server and also, by using FIFO queue, it’ll not overload a Web server.
How big will our URL frontier be? The size would be in the hundreds of millions of URLs. Hence,
we need to store our URLs on a disk. We can implement our queues in such a way that they have
separate buffers for enqueuing and dequeuing. Enqueue buffer, once filled, will be dumped to the disk,
whereas dequeue buffer will keep a cache of URLs that need to be visited; it can periodically read from
disk to fill the buffer.
2. The fetcher module: The purpose of a fetcher module is to download the document corresponding
to a given URL using the appropriate network protocol like HTTP. As discussed above, webmasters
create robot.txt to make certain parts of their websites off limits for the crawler. To avoid downloading
this file on every request, our crawler’s HTTP protocol module can maintain a fixed-sized cache
mapping host-names to their robot’s exclusion rules.
3. Document input stream: Our crawler’s design enables the same document to be processed by
multiple processing modules. To avoid downloading a document multiple times, we cache the
document locally using an abstraction called a Document Input Stream (DIS).
A DIS is an input stream that caches the entire contents of the document read from the internet. It also
provides methods to re-read the document. The DIS can cache small documents (64 KB or less)
entirely in memory, while larger documents can be temporarily written to a backing file.
Each worker thread has an associated DIS, which it reuses from document to document. After
extracting a URL from the frontier, the worker passes that URL to the relevant protocol module, which
initializes the DIS from a network connection to contain the document’s contents. The worker then
passes the DIS to all relevant processing modules.
4. Document Dedupe test: Many documents on the Web are available under multiple, different URLs.
There are also many cases in which documents are mirrored on various servers. Both of these effects
will cause any Web crawler to download the same document multiple times. To prevent processing of a
document more than once, we perform a dedupe test on each document to remove duplication.
To perform this test, we can calculate a 64-bit checksum of every processed document and store it in a
database. For every new document, we can compare its checksum to all the previously calculated
checksums to see the document has been seen before. We can use MD5 or SHA to calculate these
checksums.
How big would be the checksum store? If the whole purpose of our checksum store is to do dedupe,
then we just need to keep a unique set containing checksums of all previously processed document.
Considering 15 billion distinct web pages, we would need:
15B * 8 bytes => 120 GB
Although this can fit into a modern-day server’s memory, if we don’t have enough memory available,
we can keep smaller LRU based cache on each server with everything backed by persistent storage.
The dedupe test first checks if the checksum is present in the cache. If not, it has to check if the
checksum resides in the back storage. If the checksum is found, we will ignore the document.
Otherwise, it will be added to the cache and back storage.
5. URL filters: The URL filtering mechanism provides a customizable way to control the set of URLs
that are downloaded. This is used to blacklist websites so that our crawler can ignore them. Before
adding each URL to the frontier, the worker thread consults the user-supplied URL filter. We can define
filters to restrict URLs by domain, prefix, or protocol type.
6. Domain name resolution: Before contacting a Web server, a Web crawler must use the Domain
Name Service (DNS) to map the Web server’s hostname into an IP address. DNS name resolution will
be a big bottleneck of our crawlers given the amount of URLs we will be working with. To avoid
repeated requests, we can start caching DNS results by building our local DNS server.
7. URL dedupe test: While extracting links, any Web crawler will encounter multiple links to the same
document. To avoid downloading and processing a document multiple times, a URL dedupe test must
be performed on each extracted link before adding it to the URL frontier.
To perform the URL dedupe test, we can store all the URLs seen by our crawler in canonical form in a
database. To save space, we do not store the textual representation of each URL in the URL set, but
rather a fixed-sized checksum.
To reduce the number of operations on the database store, we can keep an in-memory cache of popular
URLs on each host shared by all threads. The reason to have this cache is that links to some URLs are
quite common, so caching the popular ones in memory will lead to a high in-memory hit rate.
How much storage we would need for URL’s store? If the whole purpose of our checksum is to do
URL dedupe, then we just need to keep a unique set containing checksums of all previously seen
URLs. Considering 15 billion distinct URLs and 4 bytes for checksum, we would need:
15B * 4 bytes => 60 GB
Can we use bloom filters for deduping? Bloom filters are a probabilistic data structure for set
membership testing that may yield false positives. A large bit vector represents the set. An element is
added to the set by computing ‘n’ hash functions of the element and setting the corresponding bits. An
element is deemed to be in the set if the bits at all ‘n’ of the element’s hash locations are set. Hence, a
document may incorrectly be deemed to be in the set, but false negatives are not possible.
The disadvantage of using a bloom filter for the URL seen test is that each false positive will cause the
URL not to be added to the frontier and, therefore, the document will never be downloaded. The chance
of a false positive can be reduced by making the bit vector larger.
8. Checkpointing: A crawl of the entire Web takes weeks to complete. To guard against failures, our
crawler can write regular snapshots of its state to the disk. An interrupted or aborted crawl can easily be
restarted from the latest checkpoint.
7. Fault tolerance
We should use consistent hashing for distribution among crawling servers. Consistent hashing will not
only help in replacing a dead host, but also help in distributing load among crawling servers.
All our crawling servers will be performing regular checkpointing and storing their FIFO queues to
disks. If a server goes down, we can replace it. Meanwhile, consistent hashing should shift the load to
other servers.
8. Data Partitioning
Our crawler will be dealing with three kinds of data: 1) URLs to visit 2) URL checksums for dedupe 3)
Document checksums for dedupe.
Since we are distributing URLs based on the hostnames, we can store these data on the same host. So,
each host will store its set of URLs that need to be visited, checksums of all the previously visited
URLs and checksums of all the downloaded documents. Since we will be using consistent hashing, we
can assume that URLs will be redistributed from overloaded hosts.
Each host will perform checkpointing periodically and dump a snapshot of all the data it is holding
onto a remote server. This will ensure that if a server dies down another server can replace it by taking
its data from the last snapshot.
9. Crawler Traps
There are many crawler traps, spam sites, and cloaked content. A crawler trap is a URL or set of URLs
that cause a crawler to crawl indefinitely. Some crawler traps are unintentional. For example, a
symbolic link within a file system can create a cycle. Other crawler traps are introduced intentionally.
For example, people have written traps that dynamically generate an infinite Web of documents. The
motivations behind such traps vary. Anti-spam traps are designed to catch crawlers used by spammers
looking for email addresses, while other sites use traps to catch search engine crawlers to boost their
search ratings.
Designing Facebook’s Newsfeed
Let's design Facebook's Newsfeed, which would contain posts, photos, videos, and status updates from
all the people and pages a user follows. Similar Services: Twitter Newsfeed, Instagram Newsfeed,
Quora Newsfeed Difficulty Level: Hard
1. What is Facebook’s newsfeed?
A Newsfeed is the constantly updating list of stories in the middle of Facebook’s homepage. It includes
status updates, photos, videos, links, app activity, and ‘likes’ from people, pages, and groups that a user
follows on Facebook. In other words, it is a compilation of a complete scrollable version of your
friends’ and your life story from photos, videos, locations, status updates, and other activities.
For any social media site you design - Twitter, Instagram, or Facebook - you will need some newsfeed
system to display updates from friends and followers.
2. Requirements and Goals of the System
Let’s design a newsfeed for Facebook with the following requirements:
Functional requirements:
1. Newsfeed will be generated based on the posts from the people, pages, and groups that a user
follows.
2. A user may have many friends and follow a large number of pages/groups.
3. Feeds may contain images, videos, or just text.
4. Our service should support appending new posts as they arrive to the newsfeed for all active
users.
Non-functional requirements:
1. Our system should be able to generate any user’s newsfeed in real-time - maximum latency seen
by the end user would be 2s.
2. A post shouldn’t take more than 5s to make it to a user’s feed assuming a new newsfeed request
comes in.
3. Capacity Estimation and Constraints
Let’s assume on average a user has 300 friends and follows 200 pages.
Traffic estimates: Let’s assume 300M daily active users with each user fetching their timeline an
average of five times a day. This will result in 1.5B newsfeed requests per day or approximately 17,500
requests per second.
Storage estimates: On average, let’s assume we need to have around 500 posts in every user’s feed
that we want to keep in memory for a quick fetch. Let’s also assume that on average each post would
be 1KB in size. This would mean that we need to store roughly 500KB of data per user. To store all this
data for all the active users we would need 150TB of memory. If a server can hold 100GB we would
need around 1500 machines to keep the top 500 posts in memory for all active users.
4. System APIs
�
Once we have finalized the requirements, it’s always a good idea to define the system APIs.
This should explicitly state what is expected from the system.
We can have SOAP or REST APIs to expose the functionality of our service. The following could be
the definition of the API for getting the newsfeed:
getUserFeed(api_dev_key, user_id, since_id, count, max_id, exclude_replies)
Parameters:
api_dev_key (string): The API developer key of a registered can be used to, among other things,
throttle users based on their allocated quota.
user_id (number): The ID of the user for whom the system will generate the newsfeed.
since_id (number): Optional; returns results with an ID higher than (that is, more recent than) the
specified ID.
count (number): Optional; specifies the number of feed items to try and retrieve up to a maximum of
200 per distinct request.
max_id (number): Optional; returns results with an ID less than (that is, older than) or equal to the
specified ID.
exclude_replies(boolean): Optional; this parameter will prevent replies from appearing in the returned
timeline.
Returns: (JSON) Returns a JSON object containing a list of feed items.
5. Database Design
There are three primary objects: User, Entity (e.g. page, group, etc.), and FeedItem (or Post). Here are
some observations about the relationships between these entities:
• A User can follow other entities and can become friends with other users.
• Both users and entities can post FeedItems which can contain text, images, or videos.
• Each FeedItem will have a UserID which will point to the User who created it. For simplicity,
let’s assume that only users can create feed items, although, on Facebook Pages can post feed
item too.
• Each FeedItem can optionally have an EntityID pointing to the page or the group where that
post was created.
If we are using a relational database, we would need to model two relations: User-Entity relation and
FeedItem-Media relation. Since each user can be friends with many people and follow a lot of entities,
we can store this relation in a separate table. The “Type” column in “UserFollow” identifies if the
entity being followed is a User or Entity. Similarly, we can have a table for FeedMedia relation.
6. High Level System Design
At a high level this problem can be divided into two parts:
Feed generation: Newsfeed is generated from the posts (or feed items) of users and entities (pages and
groups) that a user follows. So, whenever our system receives a request to generate the feed for a user
(say Jane), we will perform the following steps:
1. Retrieve IDs of all users and entities that Jane follows.
2. Retrieve latest, most popular and relevant posts for those IDs. These are the potential posts that
we can show in Jane’s newsfeed.
3. Rank these posts based on the relevance to Jane. This represents Jane’s current feed.
4. Store this feed in the cache and return top posts (say 20) to be rendered on Jane’s feed.
5. On the front-end, when Jane reaches the end of her current feed, she can fetch the next 20 posts
from the server and so on.
One thing to notice here is that we generated the feed once and stored it in the cache. What about new
incoming posts from people that Jane follows? If Jane is online, we should have a mechanism to rank
and add those new posts to her feed. We can periodically (say every five minutes) perform the above
steps to rank and add the newer posts to her feed. Jane can then be notified that there are newer items in
her feed that she can fetch.
Feed publishing: Whenever Jane loads her newsfeed page, she has to request and pull feed items from
the server. When she reaches the end of her current feed, she can pull more data from the server. For
newer items either the server can notify Jane and then she can pull, or the server can push, these new
posts. We will discuss these options in detail later.
At a high level, we will need following components in our Newsfeed service:
1. Web servers: To maintain a connection with the user. This connection will be used to transfer
data between the user and the server.
2. Application server: To execute the workflows of storing new posts in the database servers. We
will also need some application servers to retrieve and to push the newsfeed to the end user.
3. Metadata database and cache: To store the metadata about Users, Pages, and Groups.
4. Posts database and cache: To store metadata about posts and their contents.
5. Video and photo storage, and cache: Blob storage, to store all the media included in the posts.
6. Newsfeed generation service: To gather and rank all the relevant posts for a user to generate
newsfeed and store in the cache. This service will also receive live updates and will add these
newer feed items to any user’s timeline.
7. Feed notification service: To notify the user that there are newer items available for their
newsfeed.
Following is the high-level architecture diagram of our system. User B and C are following User A.
Facebook Newsfeed Architecture
7. Detailed Component Design
Let’s discuss different components of our system in detail.
a. Feed generation
Let’s take the simple case of the newsfeed generation service fetching most recent posts from all the
users and entities that Jane follows; the query would look like this:
(SELECT FeedItemID FROM FeedItem
SELECT EntityOrFriendID FROM
type = 0(user))
)
UNION
(SELECT FeedItemID FROM FeedItem
SELECT EntityOrFriendID FROM
type = 1(entity))
)
ORDER BY CreationDate DESC
LIMIT 100
WHERE UserID in (
UserFollow WHERE UserID = <current_user_id> and
WHERE EntityID in (
UserFollow WHERE UserID = <current_user_id> and
Here are issues with this design for the feed generation service:
1. Crazy slow for users with a lot of friends/follows as we have to perform
sorting/merging/ranking of a huge number of posts.
2. We generate the timeline when a user loads their page. This would be quite slow and have a
high latency.
3. For live updates, each status update will result in feed updates for all followers. This could
result in high backlogs in our Newsfeed Generation Service.
4. For live updates, the server pushing (or notifying about) newer posts to users could lead to very
heavy loads, especially for people or pages that have a lot of followers. To improve the
efficiency, we can pre-generate the timeline and store it in a memory.
Offline generation for newsfeed: We can have dedicated servers that are continuously generating
users’ newsfeed and storing them in memory. So, whenever a user requests for the new posts for their
feed, we can simply serve it from the pre-generated, stored location. Using this scheme, user’s
newsfeed is not compiled on load, but rather on a regular basis and returned to users whenever they
request for it.
Whenever these servers need to generate the feed for a user, they will first query to see what was the
last time the feed was generated for that user. Then, new feed data would be generated from that time
onwards. We can store this data in a hash table where the “key” would be UserID and “value” would be
a STRUCT like this:
Struct {
LinkedHashMap<FeedItemID, FeedItem> feedItems;
DateTime lastGenerated;
}
We can store FeedItemIDs in a data structure similar to Linked HashMap or TreeMap, which can allow
us to not only jump to any feed item but also iterate through the map easily. Whenever users want to
fetch more feed items, they can send the last FeedItemID they currently see in their newsfeed, we can
then jump to that FeedItemID in our hash-map and return next batch/page of feed items from there.
How many feed items should we store in memory for a user’s feed? Initially, we can decide to store
500 feed items per user, but this number can be adjusted later based on the usage pattern. For example,
if we assume that one page of a user’s feed has 20 posts and most of the users never browse more than
ten pages of their feed, we can decide to store only 200 posts per user. For any user who wants to see
more posts (more than what is stored in memory), we can always query backend servers.
Should we generate (and keep in memory) newsfeeds for all users? There will be a lot of users that
don’t login frequently. Here are a few things we can do to handle this; 1) a more straightforward
approach could be, to use a LRU based cache that can remove users from memory that haven’t
accessed their newsfeed for a long time 2) a smarter solution can figure out the login pattern of users to
pre-generate their newsfeed, e.g., at what time of the day a user is active and which days of the week
does a user access their newsfeed? etc.
Let’s now discuss some solutions to our “live updates” problems in the following section.
b. Feed publishing
The process of pushing a post to all the followers is called a fanout. By analogy, the push approach is
called fanout-on-write, while the pull approach is called fanout-on-load. Let’s discuss different options
for publishing feed data to users.
1. “Pull” model or Fan-out-on-load: This method involves keeping all the recent feed data in
memory so that users can pull it from the server whenever they need it. Clients can pull the feed
data on a regular basis or manually whenever they need it. Possible problems with this approach
are a) New data might not be shown to the users until they issue a pull request, b) It’s hard to
find the right pull cadence, as most of the time pull requests will result in an empty response if
there is no new data, causing waste of resources.
2. “Push” model or Fan-out-on-write: For a push system, once a user has published a post, we
can immediately push this post to all the followers. The advantage is that when fetching feed
you don’t need to go through your friend’s list and get feeds for each of them. It significantly
reduces read operations. To efficiently handle this, users have to maintain a Long Poll request
with the server for receiving the updates. A possible problem with this approach is that when a
user has millions of followers (a celebrity-user) the server has to push updates to a lot of people.
3. Hybrid: An alternate method to handle feed data could be to use a hybrid approach, i.e., to do a
combination of fan-out-on-write and fan-out-on-load. Specifically, we can stop pushing posts
from users with a high number of followers (a celebrity user) and only push data for those users
who have a few hundred (or thousand) followers. For celebrity users, we can let the followers
pull the updates. Since the push operation can be extremely costly for users who have a lot of
friends or followers, by disabling fanout for them, we can save a huge number of resources.
Another alternate approach could be that, once a user publishes a post, we can limit the fanout
to only her online friends. Also, to get benefits from both the approaches, a combination of
‘push to notify’ and ‘pull for serving’ end users is a great way to go. Purely a push or pull model
is less versatile.
How many feed items can we return to the client in each request? We should have a maximum limit
for the number of items a user can fetch in one request (say 20). But, we should let the client specify
how many feed items they want with each request as the user may like to fetch a different number of
posts depending on the device (mobile vs. desktop).
Should we always notify users if there are new posts available for their newsfeed? It could be
useful for users to get notified whenever new data is available. However, on mobile devices, where data
usage is relatively expensive, it can consume unnecessary bandwidth. Hence, at least for mobile
devices, we can choose not to push data, instead, let users “Pull to Refresh” to get new posts.
8. Feed Ranking
The most straightforward way to rank posts in a newsfeed is by the creation time of the posts, but
today’s ranking algorithms are doing a lot more than that to ensure “important” posts are ranked higher.
The high-level idea of ranking is first to select key “signals” that make a post important and then to
find out how to combine them to calculate a final ranking score.
More specifically, we can select features that are relevant to the importance of any feed item, e.g.,
number of likes, comments, shares, time of the update, whether the post has images/videos, etc., and
then, a score can be calculated using these features. This is generally enough for a simple ranking
system. A better ranking system can significantly improve itself by constantly evaluating if we are
making progress in user stickiness, retention, ads revenue, etc.
9. Data Partitioning
a. Sharding posts and metadata
Since we have a huge number of new posts every day and our read load is extremely high too, we need
to distribute our data onto multiple machines such that we can read/write it efficiently. For sharding our
databases that are storing posts and their metadata, we can have a similar design as discussed under
Designing Twitter.
b. Sharding feed data
For feed data, which is being stored in memory, we can partition it based on UserID. We can try storing
all the data of a user on one server. When storing, we can pass the UserID to our hash function that will
map the user to a cache server where we will store the user’s feed objects. Also, for any given user,
since we don’t expect to store more than 500 FeedItmeIDs, we will not run into a scenario where feed
data for a user doesn’t fit on a single server. To get the feed of a user, we would always have to query
only one server. For future growth and replication, we must use Consistent Hashing.
Designing Yelp or Nearby Friends
Let's design a Yelp like service, where users can search for nearby places like restaurants, theaters, or
shopping malls, etc., and can also add/view reviews of places. Similar Services: Proximity server.
Difficulty Level: Hard
1. Why Yelp or Proximity Server?
Proximity servers are used to discover nearby attractions like places, events, etc. If you haven’t used
yelp.com before, please try it before proceeding (you can search for nearby restaurants, theaters, etc.)
and spend some time understanding different options that the website offers. This will help you a lot in
understanding this chapter better.
2. Requirements and Goals of the System
What do we wish to achieve from a Yelp like service? Our service will be storing information about
different places so that users can perform a search on them. Upon querying, our service will return a list
of places around the user.
Our Yelp-like service should meet the following requirements:
Functional Requirements:
1. Users should be able to add/delete/update Places.
2. Given their location (longitude/latitude), users should be able to find all nearby places within a
given radius.
3. Users should be able to add feedback/review about a place. The feedback can have pictures,
text, and a rating.
Non-functional Requirements:
1. Users should have a real-time search experience with minimum latency.
2. Our service should support a heavy search load. There will be a lot of search requests compared
to adding a new place.
3. Scale Estimation
Let’s build our system assuming that we have 500M places and 100K queries per second (QPS). Let’s
also assume a 20% growth in the number of places and QPS each year.
4. Database Schema
Each location can have the following fields:
1.
2.
3.
4.
5.
6.
LocationID (8 bytes): Uniquely identifies a location.
Name (256 bytes)
Latitude (8 bytes)
Longitude (8 bytes)
Description (512 bytes)
Category (1 byte): E.g., coffee shop, restaurant, theater, etc.
Although a four bytes number can uniquely identify 500M locations, with future growth in mind, we
will go with 8 bytes for LocationID.
Total size: 8 + 256 + 8 + 8 + 512 + 1 => 793 bytes
We also need to store reviews, photos, and ratings of a Place. We can have a separate table to store
reviews for Places:
1. LocationID (8 bytes)
2. ReviewID (4 bytes): Uniquely identifies a review, assuming any location will not have more
than 2^32 reviews.
3. ReviewText (512 bytes)
4. Rating (1 byte): how many stars a place gets out of ten.
Similarly, we can have a separate table to store photos for Places and Reviews.
5. System APIs
We can have SOAP or REST APIs to expose the functionality of our service. The following could be
the definition of the API for searching:
search(api_dev_key, search_terms, user_location, radius_filter,
maximum_results_to_return,
category_filter, sort, page_token)
Parameters:
api_dev_key (string): The API developer key of a registered account. This will be used to, among other
things, throttle users based on their allocated quota.
search_terms (string): A string containing the search terms.
user_location (string): Location of the user performing the search.
radius_filter (number): Optional search radius in meters.
maximum_results_to_return (number): Number of business results to return.
category_filter (string): Optional category to filter search results, e.g., Restaurants, Shopping Centers,
etc.
sort (number): Optional sort mode: Best matched (0 - default), Minimum distance (1), Highest rated
(2).
page_token (string): This token will specify a page in the result set that should be returned.
Returns: (JSON)
A JSON containing information about a list of businesses matching the search query. Each result entry
will have the business name, address, category, rating, and thumbnail.
6. Basic System Design and Algorithm
At a high level, we need to store and index each dataset described above (places, reviews, etc.). For
users to query this massive database, the indexing should be read efficient, since while searching for
the nearby places users expect to see the results in real-time.
Given that the location of a place doesn’t change that often, we don’t need to worry about frequent
updates of the data. As a contrast, if we intend to build a service where objects do change their location
frequently, e.g., people or taxis, then we might come up with a very different design.
Let’s see what are different ways to store this data and also find out which method will suit best for our
use cases:
a. SQL solution
One simple solution could be to store all the data in a database like MySQL. Each place will be stored
in a separate row, uniquely identified by LocationID. Each place will have its longitude and latitude
stored separately in two different columns, and to perform a fast search; we should have indexes on
both these fields.
To find all the nearby places of a given location (X, Y) within a radius ‘D’, we can query like this:
Select * from Places where Latitude between X-D and X+D and Longitude between Y-D and Y+D
The above query is not completely accurate, as we know that to find the distance between two points
we have to use the distance formula (Pythagorean theorem), but for simplicity let’s take this.
How efficient would this query be? We have estimated 500M places to be stored in our service. Since
we have two separate indexes, each index can return a huge list of places and performing an
intersection on those two lists won’t be efficient. Another way to look at this problem is that there could
be too many locations between ‘X-D’ and ‘X+D’, and similarly between ‘Y-D’ and ‘Y+D’. If we can
somehow shorten these lists, it can improve the performance of our query.
b. Grids
We can divide the whole map into smaller grids to group locations into smaller sets. Each grid will
store all the Places residing within a specific range of longitude and latitude. This scheme would enable
us to query only a few grids to find nearby places. Based on a given location and radius, we can find all
the neighboring grids and then query these grids to find nearby places.
Let’s assume that GridID (a four bytes number) would uniquely identify grids in our system.
What could be a reasonable grid size? Grid size could be equal to the distance we would like to
query since we also want to reduce the number of grids. If the grid size is equal to the distance we want
to query, then we only need to search within the grid which contains the given location and neighboring
eight grids. Since our grids would be statically defined (from the fixed grid size), we can easily find the
grid number of any location (lat, long) and its neighboring grids.
In the database, we can store the GridID with each location and have an index on it, too, for faster
searching. Now, our query will look like:
Select * from Places where Latitude between X-D and X+D and Longitude between Y-D and Y+D and
GridID in (GridID, GridID1, GridID2, ..., GridID8)
This will undoubtedly improve the runtime of our query.
Should we keep our index in memory? Maintaining the index in memory will improve the
performance of our service. We can keep our index in a hash table where ‘key’ is the grid number and
‘value’ is the list of places contained in that grid.
How much memory will we need to store the index? Let’s assume our search radius is 10 miles;
given that the total area of the earth is around 200 million square miles, we will have 20 million grids.
We would need a four bytes number to uniquely identify each grid and, since LocationID is 8 bytes, we
would need 4GB of memory (ignoring hash table overhead) to store the index.
(4 * 20M) + (8 * 500M) ~= 4 GB
This solution can still run slow for those grids that have a lot of places since our places are not
uniformly distributed among grids. We can have a thickly dense area with a lot of places, and on the
other hand, we can have areas which are sparsely populated.
This problem can be solved if we can dynamically adjust our grid size such that whenever we have a
grid with a lot of places we break it down to create smaller grids. A couple of challenges with this
approach could be: 1) how to map these grids to locations and 2) how to find all the neighboring grids
of a grid.
c. Dynamic size grids
Let’s assume we don’t want to have more than 500 places in a grid so that we can have a faster
searching. So, whenever a grid reaches this limit, we break it down into four grids of equal size and
distribute places among them. This means thickly populated areas like downtown San Francisco will
have a lot of grids, and sparsely populated area like the Pacific Ocean will have large grids with places
only around the coastal lines.
What data-structure can hold this information? A tree in which each node has four children can
serve our purpose. Each node will represent a grid and will contain information about all the places in
that grid. If a node reaches our limit of 500 places, we will break it down to create four child nodes
under it and distribute places among them. In this way, all the leaf nodes will represent the grids that
cannot be further broken down. So leaf nodes will keep a list of places with them. This tree structure in
which each node can have four children is called a QuadTree
How will we build a QuadTree? We will start with one node that will represent the whole world in
one grid. Since it will have more than 500 locations, we will break it down into four nodes and
distribute locations among them. We will keep repeating this process with each child node until there
are no nodes left with more than 500 locations.
How will we find the grid for a given location? We will start with the root node and search
downward to find our required node/grid. At each step, we will see if the current node we are visiting
has children. If it has, we will move to the child node that contains our desired location and repeat this
process. If the node does not have any children, then that is our desired node.
How will we find neighboring grids of a given grid? Since only leaf nodes contain a list of locations,
we can connect all leaf nodes with a doubly linked list. This way we can iterate forward or backward
among the neighboring leaf nodes to find out our desired locations. Another approach for finding
adjacent grids would be through parent nodes. We can keep a pointer in each node to access its parent,
and since each parent node has pointers to all of its children, we can easily find siblings of a node. We
can keep expanding our search for neighboring grids by going up through the parent pointers.
Once we have nearby LocationIDs, we can query the backend database to find details about those
places.
What will be the search workflow? We will first find the node that contains the user’s location. If that
node has enough desired places, we can return them to the user. If not, we will keep expanding to the
neighboring nodes (either through the parent pointers or doubly linked list) until either we find the
required number of places or exhaust our search based on the maximum radius.
How much memory will be needed to store the QuadTree? For each Place, if we cache only
LocationID and Lat/Long, we would need 12GB to store all places.
24 * 500M => 12 GB
Since each grid can have a maximum of 500 places, and we have 500M locations, how many total grids
we will have?
500M / 500 => 1M grids
Which means we will have 1M leaf nodes and they will be holding 12GB of location data. A QuadTree
with 1M leaf nodes will have approximately 1/3rd internal nodes, and each internal node will have 4
pointers (for its children). If each pointer is 8 bytes, then the memory we need to store all internal
nodes would be:
1M * 1/3 * 4 * 8 = 10 MB
So, total memory required to hold the whole QuadTree would be 12.01GB. This can easily fit into a
modern-day server.
How would we insert a new Place into our system? Whenever a new Place is added by a user, we
need to insert it into the databases as well as in the QuadTree. If our tree resides on one server, it is easy
to add a new Place, but if the QuadTree is distributed among different servers, first we need to find the
grid/server of the new Place and then add it there (discussed in the next section).
7. Data Partitioning
What if we have a huge number of places such that our index does not fit into a single machine’s
memory? With 20% growth each year we will reach the memory limit of the server in the future. Also,
what if one server cannot serve the desired read traffic? To resolve these issues, we must partition our
QuadTree!
We will explore two solutions here (both of these partitioning schemes can be applied to databases,
too):
a. Sharding based on regions: We can divide our places into regions (like zip codes), such that all
places belonging to a region will be stored on a fixed node. To store a place we will find the server
through its region and, similarly, while querying for nearby places we will ask the region server that
contains user’s location. This approach has a couple of issues:
1. What if a region becomes hot? There would be a lot of queries on the server holding that region,
making it perform slow. This will affect the performance of our service.
2. Over time, some regions can end up storing a lot of places compared to others. Hence,
maintaining a uniform distribution of places, while regions are growing is quite difficult.
To recover from these situations, either we have to repartition our data or use consistent hashing.
b. Sharding based on LocationID: Our hash function will map each LocationID to a server where we
will store that place. While building our QuadTree, we will iterate through all the places and calculate
the hash of each LocationID to find a server where it would be stored. To find places near a location,
we have to query all servers and each server will return a set of nearby places. A centralized server will
aggregate these results to return them to the user.
Will we have different QuadTree structure on different partitions? Yes, this can happen since it is
not guaranteed that we will have an equal number of places in any given grid on all partitions.
However, we do make sure that all servers have approximately an equal number of Places. This
different tree structure on different servers will not cause any issue though, as we will be searching all
the neighboring grids within the given radius on all partitions.
The remaining part of this chapter assumes that we have partitioned our data based on LocationID.
8. Replication and Fault Tolerance
Having replicas of QuadTree servers can provide an alternate to data partitioning. To distribute read
traffic, we can have replicas of each QuadTree server. We can have a master-slave configuration where
replicas (slaves) will only serve read traffic; all write traffic will first go to the master and then applied
to slaves. Slaves might not have some recently inserted places (a few milliseconds delay will be there),
but this could be acceptable.
What will happen when a QuadTree server dies? We can have a secondary replica of each server and, if
primary dies, it can take control after the failover. Both primary and secondary servers will have the
same QuadTree structure.
What if both primary and secondary servers die at the same time? We have to allocate a new
server and rebuild the same QuadTree on it. How can we do that, since we don’t know what places
were kept on this server? The brute-force solution would be to iterate through the whole database and
filter LocationIDs using our hash function to figure out all the required places that will be stored on this
server. This would be inefficient and slow; also, during the time when the server is being rebuilt, we
will not be able to serve any query from it, thus missing some places that should have been seen by
users.
How can we efficiently retrieve a mapping between Places and QuadTree server? We have to build
a reverse index that will map all the Places to their QuadTree server. We can have a separate QuadTree
Index server that will hold this information. We will need to build a HashMap where the ‘key’ is the
QuadTree server number and the ‘value’ is a HashSet containing all the Places being kept on that
QuadTree server. We need to store LocationID and Lat/Long with each place because information
servers can build their QuadTrees through this. Notice that we are keeping Places’ data in a HashSet,
this will enable us to add/remove Places from our index quickly. So now, whenever a QuadTree server
needs to rebuild itself, it can simply ask the QuadTree Index server for all the Places it needs to store.
This approach will surely be quite fast. We should also have a replica of the QuadTree Index server for
fault tolerance. If a QuadTree Index server dies, it can always rebuild its index from iterating through
the database.
9. Cache
To deal with hot Places, we can introduce a cache in front of our database. We can use an off-the-shelf
solution like Memcache, which can store all data about hot places. Application servers, before hitting
the backend database, can quickly check if the cache has that Place. Based on clients’ usage pattern, we
can adjust how many cache servers we need. For cache eviction policy, Least Recently Used (LRU)
seems suitable for our system.
10. Load Balancing (LB)
We can add LB layer at two places in our system 1) Between Clients and Application servers and 2)
Between Application servers and Backend server. Initially, a simple Round Robin approach can be
adopted; that will distribute all incoming requests equally among backend servers. This LB is simple to
implement and does not introduce any overhead. Another benefit of this approach is if a server is dead
the load balancer will take it out of the rotation and will stop sending any traffic to it.
A problem with Round Robin LB is, it won’t take server load into consideration. If a server is
overloaded or slow, the load balancer will not stop sending new requests to that server. To handle this, a
more intelligent LB solution would be needed that periodically queries backend server about their load
and adjusts traffic based on that.
11. Ranking
How about if we want to rank the search results not just by proximity but also by popularity or
relevance?
How can we return most popular places within a given radius? Let’s assume we keep track of the
overall popularity of each place. An aggregated number can represent this popularity in our system,
e.g., how many stars a place gets out of ten (this would be an average of different rankings given by
users)? We will store this number in the database as well as in the QuadTree. While searching for the
top 100 places within a given radius, we can ask each partition of the QuadTree to return the top 100
places with maximum popularity. Then the aggregator server can determine the top 100 places among
all the places returned by different partitions.
Remember that we didn’t build our system to update place’s data frequently. With this design, how can
we modify the popularity of a place in our QuadTree? Although we can search a place and update its
popularity in the QuadTree, it would take a lot of resources and can affect search requests and system
throughput. Assuming the popularity of a place is not expected to reflect in the system within a few
hours, we can decide to update it once or twice a day, especially when the load on the system is
minimum.
Our next problem, Designing Uber backend, discusses dynamic updates of the QuadTree in detail.
Designing Uber backend
Let's design a ride-sharing service like Uber, which connects passengers who need a ride with drivers
who have a car. Similar Services: Lyft, Didi, Via, Sidecar etc. Difficulty level: Hard Prerequisite:
Designing Yelp
1. What is Uber?
Uber enables its customers to book drivers for taxi rides. Uber drivers use their personal cars to drive
customers around. Both customers and drivers communicate with each other through their smartphones
using the Uber app.
2. Requirements and Goals of the System
Let’s start with building a simpler version of Uber.
There are two kinds of users in our system: 1) Drivers 2) Customers.
• Drivers need to regularly notify the service about their current location and their availability to
pick passengers.
• Passengers get to see all the nearby available drivers.
• Customer can request a ride; nearby drivers are notified that a customer is ready to be picked
up.
• Once a driver and a customer accept a ride, they can constantly see each other’s current location
until the trip finishes.
• Upon reaching the destination, the driver marks the journey complete to become available for
the next ride.
3. Capacity Estimation and Constraints
• Let’s assume we have 300M customers and 1M drivers with 1M daily active customers and
500K daily active drivers.
• Let’s assume 1M daily rides.
• Let’s assume that all active drivers notify their current location every three seconds.
• Once a customer puts in a request for a ride, the system should be able to contact drivers in realtime.
4. Basic System Design and Algorithm
We will take the solution discussed in Designing Yelp and modify it to make it work for the abovementioned “Uber” use cases. The biggest difference we have is that our QuadTree was not built
keeping in mind that there would be frequent updates to it. So, we have two issues with our Dynamic
Grid solution:
• Since all active drivers are reporting their locations every three seconds, we need to update our
data structures to reflect that. If we have to update the QuadTree for every change in the driver’s
position, it will take a lot of time and resources. To update a driver to its new location, we must
find the right grid based on the driver’s previous location. If the new position does not belong to
the current grid, we have to remove the driver from the current grid and move/reinsert the user
to the correct grid. After this move, if the new grid reaches the maximum limit of drivers, we
have to repartition it.
• We need to have a quick mechanism to propagate the current location of all the nearby drivers
to any active customer in that area. Also, when a ride is in progress, our system needs to notify
both the driver and passenger about the current location of the car.
Although our QuadTree helps us find nearby drivers quickly, a fast update in the tree is not guaranteed.
Do we need to modify our QuadTree every time a driver reports their location? If we don’t update
our QuadTree with every update from the driver, it will have some old data and will not reflect the
current location of drivers correctly. If you recall, our purpose of building the QuadTree was to find
nearby drivers (or places) efficiently. Since all active drivers report their location every three seconds,
therefore there will be a lot more updates happening to our tree than querying for nearby drivers. So,
what if we keep the latest position reported by all drivers in a hash table and update our QuadTree a
little less frequently? Let’s assume we guarantee that a driver’s current location will be reflected in the
QuadTree within 15 seconds. Meanwhile, we will maintain a hash table that will store the current
location reported by drivers; let’s call this DriverLocationHT.
How much memory we need for DriverLocationHT? We need to store DriveID, their present and
old location, in the hash table. So, we need a total of 35 bytes to store one record:
1.
2.
3.
4.
5.
DriverID (3 bytes - 1 million drivers)
Old latitude (8 bytes)
Old longitude (8 bytes)
New latitude (8 bytes)
New longitude (8 bytes) Total = 35 bytes
If we have 1 million total drivers, we need the following memory (ignoring hash table overhead):
1 million * 35 bytes => 35 MB
How much bandwidth will our service consume to receive location updates from all drivers? If we
get DriverID and their location, it will be (3+16 => 19 bytes). If we receive this information every three
seconds from one million drivers, we will be getting 19MB per three seconds.
Do we need to distribute DriverLocationHT onto multiple servers? Although our memory and
bandwidth requirements don’t require this, since all this information can easily be stored on one server,
but, for scalability, performance, and fault tolerance, we should distribute DriverLocationHT onto
multiple servers. We can distribute based on the DriverID to make the distribution completely random.
Let’s call the machines holding DriverLocationHT the Driver Location server. Other than storing the
driver’s location, each of these servers will do two things:
1. As soon as the server receives an update for a driver’s location, they will broadcast that
information to all the interested customers.
2. The server needs to notify the respective QuadTree server to refresh the driver’s location. As
discussed above, this can happen every 10 seconds.
How can we efficiently broadcast the driver’s location to customers? We can have a Push Model
where the server will push the positions to all the relevant users. We can have a dedicated Notification
Service that can broadcast the current location of drivers to all the interested customers. We can build
our Notification service on a publisher/subscriber model. When a customer opens the Uber app on their
cell phone, they query the server to find nearby drivers. On the server side, before returning the list of
drivers to the customer, we will subscribe the customer for all the updates from those drivers. We can
maintain a list of customers (subscribers) interested in knowing the location of a driver and, whenever
we have an update in DriverLocationHT for that driver, we can broadcast the current location of the
driver to all subscribed customers. This way, our system makes sure that we always show the driver’s
current position to the customer.
How much memory will we need to store all these subscriptions? As we have estimated above, we
will have 1M daily active customers and 500K daily active drivers. On average let’s assume that five
customers subscribe to one driver. Let’s assume we store all this information in a hash table so that we
can update it efficiently. We need to store driver and customer IDs to maintain the subscriptions.
Assuming we will need 3 bytes for DriverID and 8 bytes for CustomerID, we will need 21MB of
memory.
(500K * 3) + (500K * 5 * 8 ) ~= 21 MB
How much bandwidth will we need to broadcast the driver’s location to customers? For every
active driver, we have five subscribers, so the total subscribers we have:
5 * 500K => 2.5M
To all these customers we need to send DriverID (3 bytes) and their location (16 bytes) every second,
so, we need the following bandwidth:
2.5M * 19 bytes => 47.5 MB/s
How can we efficiently implement Notification service? We can either use HTTP long polling or
push notifications.
How will the new publishers/drivers get added for a current customer? As we have proposed
above, customers will be subscribed to nearby drivers when they open the Uber app for the first time,
what will happen when a new driver enters the area the customer is looking at? To add a new
customer/driver subscription dynamically, we need to keep track of the area the customer is watching.
This will make our solution complicated; how about if instead of pushing this information, clients pull
it from the server?
How about if clients pull information about nearby drivers from the server? Clients can send their
current location, and the server will find all the nearby drivers from the QuadTree to return them to the
client. Upon receiving this information, the client can update their screen to reflect current positions of
the drivers. Clients can query every five seconds to limit the number of round trips to the server. This
solution looks simpler compared to the push model described above.
Do we need to repartition a grid as soon as it reaches the maximum limit? We can have a cushion
to let each grid grow a little bigger beyond the limit before we decide to partition it. Let’s say our grids
can grow/shrink an extra 10% before we partition/merge them. This should decrease the load for a grid
partition or merge on high traffic grids.
How would “Request Ride” use case work?
1. The customer will put a request for a ride.
2. One of the Aggregator servers will take the request and asks QuadTree servers to return nearby
drivers.
3. The Aggregator server collects all the results and sorts them by ratings.
4. The Aggregator server will send a notification to the top (say three) drivers simultaneously,
whichever driver accepts the request first will be assigned the ride. The other drivers will
receive a cancellation request. If none of the three drivers respond, the Aggregator will request a
ride from the next three drivers from the list.
5. Once a driver accepts a request, the customer is notified.
5. Fault Tolerance and Replication
What if a Driver Location server or Notification server dies? We would need replicas of these
servers, so that if the primary dies the secondary can take control. Also, we can store this data in some
persistent storage like SSDs that can provide fast IOs; this will ensure that if both primary and
secondary servers die we can recover the data from the persistent storage.
6. Ranking
How about if we want to rank the search results not just by proximity but also by popularity or
relevance?
How can we return top rated drivers within a given radius? Let’s assume we keep track of the
overall ratings of each driver in our database and QuadTree. An aggregated number can represent this
popularity in our system, e.g., how many stars does a driver get out of ten? While searching for the top
10 drivers within a given radius, we can ask each partition of the QuadTree to return the top 10 drivers
with a maximum rating. The aggregator server can then determine the top 10 drivers among all the
drivers returned by different partitions.
7. Advanced Issues
1. How will we handle clients on slow and disconnecting networks?
2. What if a client gets disconnected when they are a part of a ride? How will we handle billing in
such a scenario?
3. How about if clients pull all the information, compared to servers always pushing it?
Design Ticketmaster (*New*)
Let's design an online ticketing system that sells movie tickets like Ticketmaster or BookMyShow.
Similar Services: bookmyshow.com, ticketmaster.com Difficulty Level: Hard
1. What is an online movie ticket booking system?
A movie ticket booking system provides its customers the ability to purchase theatre seats online. Eticketing systems allow the customers to browse through movies currently being played and to book
seats, anywhere anytime.
2. Requirements and Goals of the System
Our ticket booking service should meet the following requirements:
Functional Requirements:
1. Our ticket booking service should be able to list different cities where its affiliate cinemas are
located.
2. Once the user selects the city, the service should display the movies released in that particular
city.
3. Once the user selects a movie, the service should display the cinemas running that movie and its
available show times.
4. The user should be able to choose a show at a particular cinema and book their tickets.
5. The service should be able to show the user the seating arrangement of the cinema hall. The
user should be able to select multiple seats according to their preference.
6. The user should be able to distinguish available seats from booked ones.
7. Users should be able to put a hold on the seats for five minutes before they make a payment to
finalize the booking.
8. The user should be able to wait if there is a chance that the seats might become available, e.g.,
when holds by other users expire.
9. Waiting customers should be serviced in a fair, first come, first serve manner.
Non-Functional Requirements:
1. The system would need to be highly concurrent. There will be multiple booking requests for the
same seat at any particular point in time. The service should handle this gracefully and fairly.
2. The core thing of the service is ticket booking, which means financial transactions. This means
that the system should be secure and the database ACID compliant.
3. Some Design Considerations
1. For simplicity, let’s assume our service does not require any user authentication.
2. The system will not handle partial ticket orders. Either user gets all the tickets they want or they
get nothing.
3. Fairness is mandatory for the system.
4. To stop system abuse, we can restrict users from booking more than ten seats at a time.
5. We can assume that traffic would spike on popular/much-awaited movie releases and the seats
would fill up pretty fast. The system should be scalable and highly available to keep up with the
surge in traffic.
4. Capacity Estimation
Traffic estimates: Let’s assume that our service has 3 billion page views per month and sells 10
million tickets a month.
Storage estimates: Let’s assume that we have 500 cities and, on average each city has ten cinemas. If
there are 2000 seats in each cinema and on average, there are two shows every day.
Let’s assume each seat booking needs 50 bytes (IDs, NumberOfSeats, ShowID, MovieID,
SeatNumbers, SeatStatus, Timestamp, etc.) to store in the database. We would also need to store
information about movies and cinemas; let’s assume it’ll take 50 bytes. So, to store all the data about all
shows of all cinemas of all cities for a day:
500 cities * 10 cinemas * 2000 seats * 2 shows * (50+50) bytes = 2GB / day
To store five years of this data, we would need around 3.6TB.
5. System APIs
We can have SOAP or REST APIs to expose the functionality of our service. The following could be
the definition of the APIs to search movie shows and reserve seats.
SearchMovies(api_dev_key, keyword, city, lat_long, radius, start_datetime,
end_datetime, postal_code,
includeSpellcheck, results_per_page, sorting_order)
Parameters:
api_dev_key (string): The API developer key of a registered account. This will be used to, among
other things, throttle users based on their allocated quota.
keyword (string): Keyword to search on.
city (string): City to filter movies by.
lat_long (string): Latitude and longitude to filter by. radius (number): Radius of the area in which we
want to search for events.
start_datetime (string): Filter movies with a starting datetime.
end_datetime (string): Filter movies with an ending datetime.
postal_code (string): Filter movies by postal code / zipcode.
includeSpellcheck (Enum: “yes” or “no”): Yes, to include spell check suggestions in the response.
results_per_page (number): Number of results to return per page. Maximum is 30.
sorting_order (string): Sorting order of the search result. Some allowable values : ‘name,asc’,
‘name,desc’, ‘date,asc’, ‘date,desc’, ‘distance,asc’, ‘name,date,asc’, ‘name,date,desc’, ‘date,name,asc’,
‘date,name,desc’.
Returns: (JSON)
Here is a sample list of movies and their shows:
[
{
"MovieID": 1,
"ShowID": 1,
"Title": "Cars 2",
"Description": "About cars",
"Duration": 120,
"Genre": "Animation",
"Language": "English",
"ReleaseDate": "8th Oct. 2014",
"Country": USA,
"StartTime": "14:00",
"EndTime": "16:00",
"Seats":
[
{
"Type": "Regular"
"Price": 14.99
"Status: "Almost Full"
},
{
"Type": "Premium"
"Price": 24.99
"Status: "Available"
}
]
},
{
"MovieID": 1,
"ShowID": 2,
"Title": "Cars 2",
"Description": "About cars",
"Duration": 120,
"Genre": "Animation",
"Language": "English",
"ReleaseDate": "8th Oct. 2014",
"Country": USA,
"StartTime": "16:30",
"EndTime": "18:30",
"Seats":
[
{
"Type": "Regular"
"Price": 14.99
"Status: "Full"
},
{
"Type": "Premium"
"Price": 24.99
"Status: "Almost Full"
}
]
},
]
ReserveSeats(api_dev_key, session_id, movie_id, show_id, seats_to_reserve[])
Parameters:
api_dev_key (string): same as above
session_id (string): User’s session ID to track this reservation. Once the reservation time expires,
user’s reservation on the server will be removed using this ID.
movie_id (string): Movie to reserve.
show_id (string): Show to reserve.
seats_to_reserve (number): An array containing seat IDs to reserve.
Returns: (JSON)
Returns the status of the reservation, which would be one of the following: 1) “Reservation Successful”
2) “Reservation Failed - Show Full,” 3) “Reservation Failed - Retry, as other users are holding reserved
seats”.
6. Database Design
Here are a few observations about the data we are going to store:
1.
2.
3.
4.
Each City can have multiple Cinemas.
Each Cinema will have multiple halls.
Each Movie will have many Shows and each Show will have multiple Bookings.
A user can have multiple bookings.
Movie
PK
MovieID: int
Show
PK
ShowID: int
User
Booking
PK
BookingID: int
PK
UserID: int
Title: varchar(256)
Date: datetime
NumberOfSeats: int
Name: varchar(64)
Description: varchar(512)
StartTime: datetime
Timestamp: datetime
Password: varchar(20)
Duration: datetime
EndTime: datetime
Status: int (enum)
Email: varchar(64)
Phone: varchar(16)
Language: varchar(16)
FK
CinemaHallID: int
FK
UserID: int
ReleaseDate: datetime
FK
MovieID: int
FK
ShowID: int
PK
CinemaHallID: int
Country: varchar(64)
Genre: varchar(20)
Cinema
PK
CinemaID: int
Cinema_Hall
Name: varchar(64)
TotalCinemaHalls: int
FK
CityID: int
FK
City
PK
CityID: int
Name: varchar(64)
ZipCode: varchar(16)
Amount: number
TotalSeats: int
Price: number
Timestamp: datetime
FK
CinemaSeatID: int
DiscountCouponID: int
FK
ShowID: int
RemoteTransactionID: int
FK
BookingID: int
PaymentMethod: int (enum)
CinemaID: int
CinemaSeatID: int
Type: int (enum)
FK
ShowSeatID: int
PaymentID: int
Status: int (enum)
SeatNumber: int
State: varchar(64)
PK
PK
Name: varchar(64)
Cinema_Seat
PK
Payment
Show_Seat
CinemaHallID: int
FK
BookingID: int
7. High Level Design
At a high-level, our web servers will manage users’ sessions and application servers will handle all the
ticket management, storing data in the databases as well as working with the cache servers to process
reservations.
Cache Servers
Clients
<div><br></div>
Load Balancers
[Not supported by viewer]
Web Servers
Databases
8. Detailed Component Design
First, let’s try to build our service assuming it is being served from a single server.
Ticket Booking Workflow: The following would be a typical ticket booking workflow:
1.
2.
3.
4.
5.
6.
The user searches for a movie.
The user selects a movie.
The user is shown the available shows of the movie.
The user selects a show.
The user selects the number of seats to be reserved.
If the required number of seats are available, the user is shown a map of the theater to select
seats. If not, the user is taken to ‘step 8’ below.
7. Once the user selects the seat, the system will try to reserve those selected seats.
8. If seats can’t be reserved, we have the following options:
• Show is full; the user is shown the error message.
• The seats the user wants to reserve are no longer available, but there are other seats available, so
the user is taken back to the theater map to choose different seats.
• There are no seats available to reserve, but all the seats are not booked yet, as there are some
seats that other users are holding in the reservation pool and have not booked yet. The user will
be taken to a waiting page where they can wait until the required seats get freed from the
reservation pool. This waiting could result in the following options:
• If the required number of seats become available, the user is taken to the theater map
page where they can choose seats.
• While waiting, if all seats get booked or there are fewer seats in the reservation pool than
the user intend to book, the user is shown the error message.
• User cancels the waiting and is taken back to the movie search page.
• At maximum, a user can wait one hour, after that user’s session gets expired and the user
is taken back to the movie search page.
9. If seats are reserved successfully, the user has five minutes to pay for the reservation. After
payment, booking is marked complete. If the user is not able to pay within five minutes, all their
reserved seats are freed to become available to other users.
1 of 8
How would the server keep track of all the active reservation that haven’t been booked yet? And
how would the server keep track of all the waiting customers?
We need two daemon services, one to keep track of all active reservations and remove any expired
reservation from the system; let’s call it ActiveReservationService. The other service would be
keeping track of all the waiting user requests and, as soon as the required number of seats become
available, it will notify the (the longest waiting) user to choose the seats; let’s call
it WaitingUserService.
a. ActiveReservationsService
We can keep all the reservations of a ‘show’ in memory in a data structure similar to Linked HashMap
or a TreeMap in addition to keeping all the data in the database. We will need a linked HashMap kind
of data structure that allows us to jump to any reservation to remove it when the booking is complete.
Also, since we will have expiry time associated with each reservation, the head of the HashMap will
always point to the oldest reservation record so that the reservation can be expired when the timeout is
reached.
To store every reservation for every show, we can have a HashTable where the ‘key’ would be
‘ShowID’ and the ‘value’ would be the Linked HashMap containing ‘BookingID’ and creation
‘Timestamp’.
In the database, we will store the reservation in the ‘Booking’ table and the expiry time will be in the
Timestamp column. The ‘Status’ field will have a value of ‘Reserved (1)’ and, as soon as a booking is
complete, the system will update the ‘Status’ to ‘Booked (2)’ and remove the reservation record from
the Linked HashMap of the relevant show. When the reservation is expired, we can either remove it
from the Booking table or mark it ‘Expired (3)’ in addition to removing it from memory.
ActiveReservationsService will also work with the external financial service to process user payments.
Whenever a booking is completed, or a reservation gets expired, WaitingUsersService will get a signal
so that any waiting customer can be served.
Key : Value
<span>LinkedHashMap<
BookingID, TimeStamp }</span>
[NotShowID
supported
by viewer]
E.g.,
<span>{ (1, 1499818500),
123
(</span>2, 1499818700<span>), </span>(3, 1499818800)<span> }</
[Not supported
by viewer]
ActiveReservationsService keeping track of all active reservations
b. WaitingUsersService
Just like ActiveReservationsService, we can keep all the waiting users of a show in memory in a
Linked HashMap or a TreeMap. We need a data structure similar to Linked HashMap so that we can
jump to any user to remove them from the HashMap when the user cancels their request. Also, since we
are serving in a first-come-first-serve manner, the head of the Linked HashMap would always be
pointing to the longest waiting user, so that whenever seats become available, we can serve users in a
fair manner.
We will have a HashTable to store all the waiting users for every Show. The ‘key’ would be 'ShowID,
and the ‘value’ would be a Linked HashMap containing ‘UserIDs’ and their wait-start-time.
Clients can use Long Polling for keeping themselves updated for their reservation status. Whenever
seats become available, the server can use this request to notify the user.
Reservation Expiration
On the server, ActiveReservationsService keeps track of expiry (based on reservation time) of active
reservations. As the client will be shown a timer (for the expiration time), which could be a little out of
sync with the server, we can add a buffer of five seconds on the server to safeguard from a broken
experience, such that the client never times out after the server, preventing a successful purchase.
9. Concurrency
How to handle concurrency, such that no two users are able to book same seat. We can use
transactions in SQL databases to avoid any clashes. For example, if we are using an SQL server we can
utilize Transaction Isolation Levels to lock the rows before we can update them. Here is the sample
code:
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE;
BEGIN TRANSACTION;
-- Suppose we intend to reserve three seats (IDs: 54, 55, 56) for ShowID=99
Select * From Show_Seat where ShowID=99 && ShowSeatID in (54, 55, 56) &&
Status=0 -- free
-- if the number of rows returned by the above statement is three, we can
update to
-- return success otherwise return failure to the user.
update Show_Seat ...
update Booking ...
COMMIT TRANSACTION;
‘Serializable’ is the highest isolation level and guarantees safety from Dirty, Nonrepeatable, and
Phantoms reads. One thing to note here; within a transaction, if we read rows, we get a write lock on
them so that they can’t be updated by anyone else.
Once the above database transaction is successful, we can start tracking the reservation in
ActiveReservationService.
10. Fault Tolerance
What happens when ActiveReservationsService or WaitingUsersService crashes?
Whenever ActiveReservationsService crashes, we can read all the active reservations from the
‘Booking’ table. Remember that we keep the ‘Status’ column as ‘Reserved (1)’ until a reservation gets
booked. Another option is to have a master-slave configuration so that, when the master crashes, the
slave can take over. We are not storing the waiting users in the database, so, when WaitingUsersService
crashes, we don’t have any means to recover that data unless we have a master-slave setup.
Similarly, we’ll have a master-slave setup for databases to make them fault tolerant.
11. Data Partitioning
Database partitioning: If we partition by ‘MovieID’, then all the Shows of a movie will be on a single
server. For a very hot movie, this could cause a lot of load on that server. A better approach would be to
partition based on ShowID; this way, the load gets distributed among different servers.
ActiveReservationService and WaitingUserService partitioning: Our web servers will manage all
the active users’ sessions and handle all the communication with the users. We can use the Consistent
Hashing to allocate application servers for both ActiveReservationService and WaitingUserService
based upon the ‘ShowID’. This way, all reservations and waiting users of a particular show will be
handled by a certain set of servers. Let’s assume for load balancing our Consistent Hashing allocates
three servers for any Show, so whenever a reservation is expired, the server holding that reservation
will do the following things:
1. Update database to remove the Booking (or mark it expired) and update the seats’ Status in
‘Show_Seats’ table.
2. Remove the reservation from the Linked HashMap.
3. Notify the user that their reservation has expired.
4. Broadcast a message to all WaitingUserService servers that are holding waiting users of that
Show to figure out the longest waiting user. Consistent Hashing scheme will tell what servers
are holding these users.
5. Send a message to the WaitingUserService server holding the longest waiting user to process
their request if required seats have become available.
Whenever a reservation is successful, following things will happen:
1. The server holding that reservation sends a message to all servers holding the waiting users of
that Show, so that those servers can expire all the waiting users that need more seats than the
available seats.
2. Upon receiving the above message, all servers holding the waiting users will query the database
to find how many free seats are available now. A database cache would greatly help here to run
this query only once.
3. Expire all waiting users who want to reserve more seats than the available seats. For this,
WaitingUserService has to iterate through the Linked HashMap of all the waiting users.
Additional Resources
Here are some useful links for further reading:
1. Dynamo - Highly Available Key-value Store
2. Kafka - A Distributed Messaging System for Log Processing
3. Consistent Hashing - Original paper
4. Paxos - Protocol for distributed consensus
5. Concurrency Controls - Optimistic methods for concurrency controls
6. Gossip protocol - For failure detection and more.
7. Chubby - Lock service for loosely-coupled distributed systems
8. ZooKeeper - Wait-free coordination for Internet-scale systems
9. MapReduce - Simplified Data Processing on Large Clusters
10. Hadoop - A Distributed File System
System Design Basics
Whenever we are designing a large system, we need to consider a few things:
1. What are the different architectural pieces that can be used?
2. How do these pieces work with each other?
3. How can we best utilize these pieces: what are the right tradeoffs?
Investing in scaling before it is needed is generally not a smart business proposition; however, some
forethought into the design can save valuable time and resources in the future. In the following
chapters, we will try to define some of the core building blocks of scalable systems. Familiarizing these
concepts would greatly benefit in understanding distributed system concepts. In the next section, we
will go through Consistent Hashing, CAP Theorem, Load Balancing, Caching, Data Partitioning,
Indexes, Proxies, Queues, Replication, and choosing between SQL vs. NoSQL.
Let’s start with the Key Characteristics of Distributed Systems.
Key Characteristics of Distributed
Systems
Key characteristics of a distributed system include Scalability, Reliability,
Availability, Efficiency, and Manageability. Let’s briefly review them:
Scalability
Scalability is the capability of a system, process, or a network to grow and
manage increased demand. Any distributed system that can continuously
evolve in order to support the growing amount of work is considered to be
scalable.
A system may have to scale because of many reasons like increased data
volume or increased amount of work, e.g., number of transactions. A scalable
system would like to achieve this scaling without performance loss.
Generally, the performance of a system, although designed (or claimed) to
be scalable, declines with the system size due to the management or
environment cost. For instance, network speed may become slower because
machines tend to be far apart from one another. More generally, some tasks
may not be distributed, either because of their inherent atomic nature or
because of some flaw in the system design. At some point, such tasks would
limit the speed-up obtained by distribution. A scalable architecture avoids
this situation and attempts to balance the load on all the participating nodes
evenly.
Horizontal vs. Vertical Scaling: Horizontal scaling means that you scale by
adding more servers into your pool of resources whereas Vertical scaling
means that you scale by adding more power (CPU, RAM, Storage, etc.) to an
existing server.
With horizontal-scaling it is often easier to scale dynamically by adding more
machines into the existing pool; Vertical-scaling is usually limited to the
capacity of a single server and scaling beyond that capacity often involves
downtime and comes with an upper limit.
Good examples of horizontal scaling are Cassandra and MongoDB as they
both provide an easy way to scale horizontally by adding more machines to
meet growing needs. Similarly, a good example of vertical scaling is MySQL
as it allows for an easy way to scale vertically by switching from smaller to
bigger machines. However, this process often involves downtime.
Horizontal Scaling
Vertical Scaling<br>
Add more resources to the same server
Add more servers
vs.
Vertical scaling vs. Horizontal scaling
Reliability
By definition, reliability is the probability a system will fail in a given period.
In simple terms, a distributed system is considered reliable if it keeps
delivering its services even when one or several of its software or hardware
components fail. Reliability represents one of the main characteristics of any
distributed system, since in such systems any failing machine can always be
replaced by another healthy one, ensuring the completion of the requested
task.
Take the example of a large electronic commerce store (like Amazon), where
one of the primary requirement is that any user transaction should never be
canceled due to a failure of the machine that is running that transaction. For
instance, if a user has added an item to their shopping cart, the system is
expected not to lose it. A reliable distributed system achieves this through
redundancy of both the software components and data. If the server carrying
the user’s shopping cart fails, another server that has the exact replica of the
shopping cart should replace it.
Obviously, redundancy has a cost and a reliable system has to pay that to
achieve such resilience for services by eliminating every single point of
failure.
Availability
By definition, availability is the time a system remains operational to perform
its required function in a specific period. It is a simple measure of the
percentage of time that a system, service, or a machine remains operational
under normal conditions. An aircraft that can be flown for many hours a
month without much downtime can be said to have a high availability.
Availability takes into account maintainability, repair time, spares availability,
and other logistics considerations. If an aircraft is down for maintenance, it is
considered not available during that time.
Reliability is availability over time considering the full range of possible realworld conditions that can occur. An aircraft that can make it through any
possible weather safely is more reliable than one that has vulnerabilities to
possible conditions.
Reliability Vs. Availability
If a system is reliable, it is available. However, if it is available, it is not
necessarily reliable. In other words, high reliability contributes to high
availability, but it is possible to achieve a high availability even with an
unreliable product by minimizing repair time and ensuring that spares are
always available when they are needed. Let’s take the example of an online
retail store that has 99.99% availability for the first two years after its launch.
However, the system was launched without any information security testing.
The customers are happy with the system, but they don’t realize that it isn’t
very reliable as it is vulnerable to likely risks. In the third year, the system
experiences a series of information security incidents that suddenly result in
extremely low availability for extended periods of time. This results in
reputational and financial damage to the customers.
Efficiency
To understand how to measure the efficiency of a distributed system, let’s
assume we have an operation that runs in a distributed manner and delivers
a set of items as result. Two standard measures of its efficiency are the
response time (or latency) that denotes the delay to obtain the first item and
the throughput (or bandwidth) which denotes the number of items delivered
in a given time unit (e.g., a second). The two measures correspond to the
following unit costs:
• Number of messages globally sent by the nodes of the system
regardless of the message size.
• Size of messages representing the volume of data exchanges.
The complexity of operations supported by distributed data structures (e.g.,
searching for a specific key in a distributed index) can be characterized as a
function of one of these cost units. Generally speaking, the analysis of a
distributed structure in terms of ‘number of messages’ is over-simplistic. It
ignores the impact of many aspects, including the network topology, the
network load, and its variation, the possible heterogeneity of the software
and hardware components involved in data processing and routing, etc.
However, it is quite difficult to develop a precise cost model that would
accurately take into account all these performance factors; therefore, we
have to live with rough but robust estimates of the system behavior.
Serviceability or Manageability
Another important consideration while designing a distributed system is how
easy it is to operate and maintain. Serviceability or manageability is the
simplicity and speed with which a system can be repaired or maintained; if
the time to fix a failed system increases, then availability will decrease.
Things to consider for manageability are the ease of diagnosing and
understanding problems when they occur, ease of making updates or
modifications, and how simple the system is to operate (i.e., does it routinely
operate without failure or exceptions?).
Early detection of faults can decrease or avoid system downtime. For
example, some enterprise systems can automatically call a service center
(without human intervention) when the system experiences a system fault.
Load Balancing
Load Balancer (LB) is another critical component of any distributed system. It
helps to spread the traffic across a cluster of servers to improve
responsiveness and availability of applications, websites or databases. LB
also keeps track of the status of all the resources while distributing requests.
If a server is not available to take new requests or is not responding or has
elevated error rate, LB will stop sending traffic to such a server.
Typically a load balancer sits between the client and the server accepting
incoming network and application traffic and distributing the traffic across
multiple backend servers using various algorithms. By balancing application
requests across multiple servers, a load balancer reduces individual server
load and prevents any one application server from becoming a single point of
failure, thus improving overall application availability and responsiveness.
Servers
Client
Internet
Load Balancer
To utilize full scalability and redundancy, we can try to balance the load at
each layer of the system. We can add LBs at three places:
• Between the user and the web server
• Between web servers and an internal platform layer, like application
servers or cache servers
• Between internal platform layer and database.
Benefits of Load Balancing
• Users experience faster, uninterrupted service. Users won’t have to
wait for a single struggling server to finish its previous tasks. Instead,
their requests are immediately passed on to a more readily available
resource.
• Service providers experience less downtime and higher throughput.
Even a full server failure won’t affect the end user experience as the
load balancer will simply route around it to a healthy server.
• Load balancing makes it easier for system administrators to handle
incoming requests while decreasing wait time for users.
• Smart load balancers provide benefits like predictive analytics that
determine traffic bottlenecks before they happen. As a result, the smart
load balancer gives an organization actionable insights. These are key
to automation and can help drive business decisions.
• System administrators experience fewer failed or stressed components.
Instead of a single device performing a lot of work, load balancing has
several devices perform a little bit of work.
Load Balancing Algorithms
How does the load balancer choose the backend server?
Load balancers consider two factors before forwarding a request to a
backend server. They will first ensure that the server they choose is actually
responding appropriately to requests and then use a pre-configured
algorithm to select one from the set of healthy servers. We will discuss these
algorithms shortly.
Health Checks - Load balancers should only forward traffic to “healthy”
backend servers. To monitor the health of a backend server, “health checks”
regularly attempt to connect to backend servers to ensure that servers are
listening. If a server fails a health check, it is automatically removed from the
pool, and traffic will not be forwarded to it until it responds to the health
checks again.
There is a variety of load balancing methods, which use different algorithms
for different needs.
• Least Connection Method — This method directs traffic to the server
with the fewest active connections. This approach is quite useful when
there are a large number of persistent client connections which are
unevenly distributed between the servers.
• Least Response Time Method — This algorithm directs traffic to the
server with the fewest active connections and the lowest average
response time.
• Least Bandwidth Method - This method selects the server that is
currently serving the least amount of traffic measured in megabits per
second (Mbps).
• Round Robin Method — This method cycles through a list of servers and
sends each new request to the next server. When it reaches the end of
the list, it starts over at the beginning. It is most useful when the
servers are of equal specification and there are not many persistent
connections.
• Weighted Round Robin Method — The weighted round-robin scheduling
is designed to better handle servers with different processing
capacities. Each server is assigned a weight (an integer value that
indicates the processing capacity). Servers with higher weights receive
new connections before those with less weights and servers with higher
weights get more connections than those with less weights.
• IP Hash — Under this method, a hash of the IP address of the client is
calculated to redirect the request to a server.
Redundant Load Balancers
The load balancer can be a single point of failure; to overcome this, a second
load balancer can be connected to the first to form a cluster. Each LB
monitors the health of the other and, since both of them are equally capable
of serving traffic and failure detection, in the event the main load balancer
fails, the second load balancer takes over.
Servers
[Not supported by viewer]
Client
Load Balancer (active)
Internet
Load Balancer (passive)
Following links have some good discussion about load balancers:
[1] What is load balancing
[2] Introduction to architecting systems
[3] Load balancing
Caching
Load balancing helps you scale horizontally across an ever-increasing
number of servers, but caching will enable you to make vastly better use of
the resources you already have as well as making otherwise unattainable
product requirements feasible. Caches take advantage of the locality of
reference principle: recently requested data is likely to be requested again.
They are used in almost every layer of computing: hardware, operating
systems, web browsers, web applications, and more. A cache is like shortterm memory: it has a limited amount of space, but is typically faster than
the original data source and contains the most recently accessed items.
Caches can exist at all levels in architecture, but are often found at the level
nearest to the front end where they are implemented to return data quickly
without taxing downstream levels.
Application server cache
Placing a cache directly on a request layer node enables the local storage of
response data. Each time a request is made to the service, the node will
quickly return local cached data if it exists. If it is not in the cache, the
requesting node will query the data from disk. The cache on one request
layer node could also be located both in memory (which is very fast) and on
the node’s local disk (faster than going to network storage).
What happens when you expand this to many nodes? If the request layer is
expanded to multiple nodes, it’s still quite possible to have each node host
its own cache. However, if your load balancer randomly distributes requests
across the nodes, the same request will go to different nodes, thus increasing
cache misses. Two choices for overcoming this hurdle are global caches and
distributed caches.
Content Distribution Network (CDN)
CDNs are a kind of cache that comes into play for sites serving large amounts
of static media. In a typical CDN setup, a request will first ask the CDN for a
piece of static media; the CDN will serve that content if it has it locally
available. If it isn’t available, the CDN will query the back-end servers for the
file, cache it locally, and serve it to the requesting user.
If the system we are building isn’t yet large enough to have its own CDN, we
can ease a future transition by serving the static media off a separate
subdomain (e.g. static.yourservice.com) using a lightweight HTTP server like
Nginx, and cut-over the DNS from your servers to a CDN later.
Cache Invalidation
While caching is fantastic, it does require some maintenance for keeping
cache coherent with the source of truth (e.g., database). If the data is
modified in the database, it should be invalidated in the cache; if not, this
can cause inconsistent application behavior.
Solving this problem is known as cache invalidation; there are three main
schemes that are used:
Write-through cache: Under this scheme, data is written into the cache and
the corresponding database at the same time. The cached data allows for
fast retrieval and, since the same data gets written in the permanent
storage, we will have complete data consistency between the cache and the
storage. Also, this scheme ensures that nothing will get lost in case of a
crash, power failure, or other system disruptions.
Although, write through minimizes the risk of data loss, since every write
operation must be done twice before returning success to the client, this
scheme has the disadvantage of higher latency for write operations.
Write-around cache: This technique is similar to write through cache, but
data is written directly to permanent storage, bypassing the cache. This can
reduce the cache being flooded with write operations that will not
subsequently be re-read, but has the disadvantage that a read request for
recently written data will create a “cache miss” and must be read from
slower back-end storage and experience higher latency.
Write-back cache: Under this scheme, data is written to cache alone and
completion is immediately confirmed to the client. The write to the
permanent storage is done after specified intervals or under certain
conditions. This results in low latency and high throughput for write-intensive
applications, however, this speed comes with the risk of data loss in case of a
crash or other adverse event because the only copy of the written data is in
the cache.
Cache eviction policies
Following are some of the most common cache eviction policies:
1. First In First Out (FIFO): The cache evicts the first block accessed first
without any regard to how often or how many times it was accessed
before.
2. Last In First Out (LIFO): The cache evicts the block accessed most
recently first without any regard to how often or how many times it was
accessed before.
3. Least Recently Used (LRU): Discards the least recently used items first.
4. Most Recently Used (MRU): Discards, in contrast to LRU, the most
recently used items first.
5. Least Frequently Used (LFU): Counts how often an item is needed.
Those that are used least often are discarded first.
6. Random Replacement (RR): Randomly selects a candidate item and
discards it to make space when necessary.
Following links have some good discussion about caching:
[1] Cache
[2] Introduction to architecting systems
Sharding or Data Partitioning
Data partitioning (also known as sharding) is a technique to break up a big
database (DB) into many smaller parts. It is the process of splitting up a
DB/table across multiple machines to improve the manageability,
performance, availability, and load balancing of an application. The
justification for data sharding is that, after a certain scale point, it is cheaper
and more feasible to scale horizontally by adding more machines than to
grow it vertically by adding beefier servers.
1. Partitioning Methods
There are many different schemes one could use to decide how to break up
an application database into multiple smaller DBs. Below are three of the
most popular schemes used by various large scale applications.
a. Horizontal partitioning: In this scheme, we put different rows into different
tables. For example, if we are storing different places in a table, we can
decide that locations with ZIP codes less than 10000 are stored in one table
and places with ZIP codes greater than 10000 are stored in a separate table.
This is also called a range based sharding as we are storing different ranges
of data in separate tables.
The key problem with this approach is that if the value whose range is used
for sharding isn’t chosen carefully, then the partitioning scheme will lead to
unbalanced servers. In the previous example, splitting location based on their
zip codes assumes that places will be evenly distributed across the different
zip codes. This assumption is not valid as there will be a lot of places in a
thickly populated area like Manhattan as compared to its suburb cities.
b. Vertical Partitioning: In this scheme, we divide our data to store tables
related to a specific feature in their own server. For example, if we are
building Instagram like application - where we need to store data related to
users, photos they upload, and people they follow - we can decide to place
user profile information on one DB server, friend lists on another, and photos
on a third server.
Vertical partitioning is straightforward to implement and has a low impact on
the application. The main problem with this approach is that if our application
experiences additional growth, then it may be necessary to further partition a
feature specific DB across various servers (e.g. it would not be possible for a
single server to handle all the metadata queries for 10 billion photos by 140
million users).
c. Directory Based Partitioning: A loosely coupled approach to work around
issues mentioned in the above schemes is to create a lookup service which
knows your current partitioning scheme and abstracts it away from the DB
access code. So, to find out where a particular data entity resides, we query
the directory server that holds the mapping between each tuple key to its DB
server. This loosely coupled approach means we can perform tasks like
adding servers to the DB pool or changing our partitioning scheme without
having an impact on the application.
2. Partitioning Criteria
a. Key or Hash-based partitioning: Under this scheme, we apply a hash
function to some key attributes of the entity we are storing; that yields the
partition number. For example, if we have 100 DB servers and our ID is a
numeric value that gets incremented by one each time a new record is
inserted. In this example, the hash function could be ‘ID % 100’, which will
give us the server number where we can store/read that record. This
approach should ensure a uniform allocation of data among servers. The
fundamental problem with this approach is that it effectively fixes the total
number of DB servers, since adding new servers means changing the hash
function which would require redistribution of data and downtime for the
service. A workaround for this problem is to use Consistent Hashing.
b. List partitioning: In this scheme, each partition is assigned a list of values,
so whenever we want to insert a new record, we will see which partition
contains our key and then store it there. For example, we can decide all users
living in Iceland, Norway, Sweden, Finland, or Denmark will be stored in a
partition for the Nordic countries.
c. Round-robin partitioning: This is a very simple strategy that ensures
uniform data distribution. With ‘n’ partitions, the ‘i’ tuple is assigned to
partition (i mod n).
d. Composite partitioning: Under this scheme, we combine any of the above
partitioning schemes to devise a new scheme. For example, first applying a
list partitioning scheme and then a hash based partitioning. Consistent
hashing could be considered a composite of hash and list partitioning where
the hash reduces the key space to a size that can be listed.
3. Common Problems of Sharding
On a sharded database there are certain extra constraints on the different
operations that can be performed. Most of these constraints are due to the
fact that operations across multiple tables or multiple rows in the same table
will no longer run on the same server. Below are some of the constraints and
additional complexities introduced by sharding:
a. Joins and Denormalization: Performing joins on a database which is running
on one server is straightforward, but once a database is partitioned and
spread across multiple machines it is often not feasible to perform joins that
span database shards. Such joins will not be performance efficient since data
has to be compiled from multiple servers. A common workaround for this
problem is to denormalize the database so that queries that previously
required joins can be performed from a single table. Of course, the service
now has to deal with all the perils of denormalization such as data
inconsistency.
b. Referential integrity: As we saw that performing a cross-shard query on a
partitioned database is not feasible, similarly, trying to enforce data integrity
constraints such as foreign keys in a sharded database can be extremely
difficult.
Most of RDBMS do not support foreign keys constraints across databases on
different database servers. Which means that applications that require
referential integrity on sharded databases often have to enforce it in
application code. Often in such cases, applications have to run regular SQL
jobs to clean up dangling references.
c. Rebalancing: There could be many reasons we have to change our sharding
scheme:
1. The data distribution is not uniform, e.g., there are a lot of places for a
particular ZIP code that cannot fit into one database partition.
2. There is a lot of load on a shard, e.g., there are too many requests
being handled by the DB shard dedicated to user photos.
In such cases, either we have to create more DB shards or have to rebalance
existing shards, which means the partitioning scheme changed and all
existing data moved to new locations. Doing this without incurring downtime
is extremely difficult. Using a scheme like directory based partitioning does
make rebalancing a more palatable experience at the cost of increasing the
complexity of the system and creating a new single point of failure (i.e. the
lookup service/database).
Indexes
Indexes are well known when it comes to databases. Sooner or later there
comes a time when database performance is no longer satisfactory. One of
the very first things you should turn to when that happens is database
indexing.
The goal of creating an index on a particular table in a database is to make it
faster to search through the table and find the row or rows that we want.
Indexes can be created using one or more columns of a database table,
providing the basis for both rapid random lookups and efficient access of
ordered records.
Example: A library catalog
A library catalog is a register that contains the list of books found in a library.
The catalog is organized like a database table generally with four columns:
book title, writer, subject, and date of publication. There are usually two such
catalogs: one sorted by the book title and one sorted by the writer name.
That way, you can either think of a writer you want to read and then look
through their books or look up a specific book title you know you want to
read in case you don’t know the writer’s name. These catalogs are like
indexes for the database of books. They provide a sorted list of data that is
easily searchable by relevant information.
Simply saying, an index is a data structure that can be perceived as a table
of contents that points us to the location where actual data lives. So when we
create an index on a column of a table, we store that column and a pointer to
the whole row in the index. Let’s assume a table containing a list of books,
the following diagram shows how an index on the ‘Title’ column looks like:
Index
[Not supported by viewer]
Table
[Not supported by viewer]
Just like a traditional relational data store, we can also apply this concept to
larger datasets. The trick with indexes is that we must carefully consider how
users will access the data. In the case of data sets that are many terabytes in
size, but have very small payloads (e.g., 1 KB), indexes are a necessity for
optimizing data access. Finding a small payload in such a large dataset can
be a real challenge, since we can’t possibly iterate over that much data in
any reasonable time. Furthermore, it is very likely that such a large data set
is spread over several physical devices—this means we need some way to
find the correct physical location of the desired data. Indexes are the best
way to do this.
How do Indexes decrease write performance?
An index can dramatically speed up data retrieval but may itself be large due
to the additional keys, which slow down data insertion & update.
When adding rows or making updates to existing rows for a table with an
active index, we not only have to write the data but also have to update the
index. This will decrease the write performance. This performance
degradation applies to all insert, update, and delete operations for the table.
For this reason, adding unnecessary indexes on tables should be avoided and
indexes that are no longer used should be removed. To reiterate, adding
indexes is about improving the performance of search queries. If the goal of
the database is to provide a data store that is often written to and rarely read
from, in that case, decreasing the performance of the more common
operation, which is writing, is probably not worth the increase in performance
we get from reading.
For more details, see Database Indexes.
Proxies
A proxy server is an intermediate server between the client and the back-end
server. Clients connect to proxy servers to request for a service like a web
page, file, connection, etc. In short, a proxy server is a piece of software or
hardware that acts as an intermediary for requests from clients seeking
resources from other servers.
Typically, proxies are used to filter requests, log requests, or sometimes
transform requests (by adding/removing headers, encrypting/decrypting, or
compressing a resource). Another advantage of a proxy server is that its
cache can serve a lot of requests. If multiple clients access a particular
resource, the proxy server can cache it and serve it to all the clients without
going to the remote server.
Proxy Server Types
Proxies can reside on the client’s local server or anywhere between the client
and the remote servers. Here are a few famous types of proxy servers:
Open Proxy
An open proxy is a proxy server that is accessible by any Internet user.
Generally, a proxy server only allows users within a network group (i.e. a
closed proxy) to store and forward Internet services such as DNS or web
pages to reduce and control the bandwidth used by the group. With an open
proxy, however, any user on the Internet is able to use this forwarding
service. There two famous open proxy types:
1. Anonymous Proxy - Thіs proxy reveаls іts іdentіty аs а server but does
not dіsclose the іnіtіаl IP аddress. Though thіs proxy server cаn be
dіscovered eаsіly іt cаn be benefіcіаl for some users аs іt hіdes their IP
аddress.
2. Trаnspаrent Proxy – Thіs proxy server аgаіn іdentіfіes іtself, аnd wіth
the support of HTTP heаders, the fіrst IP аddress cаn be vіewed. The
mаіn benefіt of usіng thіs sort of server іs іts аbіlіty to cаche the
websіtes.
Reverse Proxy
A reverse proxy retrieves resources on behalf of a client from one or more
servers. These resources are then returned to the client, appearing as if they
originated from the proxy server itself
Redundancy and Replication
Redundancy is the duplication of critical components or functions of a system
with the intention of increasing the reliability of the system, usually in the
form of a backup or fail-safe, or to improve actual system performance. For
example, if there is only one copy of a file stored on a single server, then
losing that server means losing the file. Since losing data is seldom a good
thing, we can create duplicate or redundant copies of the file to solve this
problem.
Redundancy plays a key role in removing the single points of failure in the
system and provides backups if needed in a crisis. For example, if we have
two instances of a service running in production and one fails, the system
can failover to the other one.
Replication means sharing information to ensure consistency between
redundant resources, such as software or hardware components, to improve
reliability, fault-tolerance, or accessibility.
Replication is widely used in many database management systems (DBMS),
usually with a master-slave relationship between the original and the
copies. The master gets all the updates, which then ripple through to the
slaves. Each slave outputs a message stating that it has received the update
successfully, thus allowing the sending of subsequent updates.
SQL vs. NoSQL
In the world of databases, there are two main types of solutions: SQL and
NoSQL (or relational databases and non-relational databases). Both of them
differ in the way they were built, the kind of information they store, and the
storage method they use.
Relational databases are structured and have predefined schemas like phone
books that store phone numbers and addresses. Non-relational databases are
unstructured, distributed, and have a dynamic schema like file folders that
hold everything from a person’s address and phone number to their
Facebook ‘likes’ and online shopping preferences.
SQL
Relational databases store data in rows and columns. Each row contains all
the information about one entity and each column contains all the separate
data points. Some of the most popular relational databases are MySQL,
Oracle, MS SQL Server, SQLite, Postgres, and MariaDB.
NoSQL
Following are the most common types of NoSQL:
Key-Value Stores: Data is stored in an array of key-value pairs. The ‘key’ is an
attribute name which is linked to a ‘value’. Well-known key-value stores
include Redis, Voldemort, and Dynamo.
Document Databases: In these databases, data is stored in documents
(instead of rows and columns in a table) and these documents are grouped
together in collections. Each document can have an entirely different
structure. Document databases include the CouchDB and MongoDB.
Wide-Column Databases: Instead of ‘tables,’ in columnar databases we have
column families, which are containers for rows. Unlike relational databases,
we don’t need to know all the columns up front and each row doesn’t have to
have the same number of columns. Columnar databases are best suited for
analyzing large datasets - big names include Cassandra and HBase.
Graph Databases: These databases are used to store data whose relations
are best represented in a graph. Data is saved in graph structures with nodes
(entities), properties (information about the entities), and lines (connections
between the entities). Examples of graph database include Neo4J and
InfiniteGraph.
High level differences between SQL and NoSQL
Storage: SQL stores data in tables where each row represents an entity and
each column represents a data point about that entity; for example, if we are
storing a car entity in a table, different columns could be ‘Color’, ‘Make’,
‘Model’, and so on.
NoSQL databases have different data storage models. The main ones are
key-value, document, graph, and columnar. We will discuss differences
between these databases below.
Schema: In SQL, each record conforms to a fixed schema, meaning the
columns must be decided and chosen before data entry and each row must
have data for each column. The schema can be altered later, but it involves
modifying the whole database and going offline.
In NoSQL, schemas are dynamic. Columns can be added on the fly and each
‘row’ (or equivalent) doesn’t have to contain data for each ‘column.’
Querying: SQL databases use SQL (structured query language) for defining
and manipulating the data, which is very powerful. In a NoSQL database,
queries are focused on a collection of documents. Sometimes it is also called
UnQL (Unstructured Query Language). Different databases have different
syntax for using UnQL.
Scalability: In most common situations, SQL databases are vertically scalable,
i.e., by increasing the horsepower (higher Memory, CPU, etc.) of the
hardware, which can get very expensive. It is possible to scale a relational
database across multiple servers, but this is a challenging and timeconsuming process.
On the other hand, NoSQL databases are horizontally scalable, meaning we
can add more servers easily in our NoSQL database infrastructure to handle a
lot of traffic. Any cheap commodity hardware or cloud instances can host
NoSQL databases, thus making it a lot more cost-effective than vertical
scaling. A lot of NoSQL technologies also distribute data across servers
automatically.
Reliability or ACID Compliancy (Atomicity, Consistency, Isolation,
Durability): The vast majority of relational databases are ACID compliant. So,
when it comes to data reliability and safe guarantee of performing
transactions, SQL databases are still the better bet.
Most of the NoSQL solutions sacrifice ACID compliance for performance and
scalability.
SQL VS. NoSQL - Which one to use?
When it comes to database technology, there’s no one-size-fits-all solution.
That’s why many businesses rely on both relational and non-relational
databases for different needs. Even as NoSQL databases are gaining
popularity for their speed and scalability, there are still situations where a
highly structured SQL database may perform better; choosing the right
technology hinges on the use case.
Reasons to use SQL database
Here are a few reasons to choose a SQL database:
1. We need to ensure ACID compliance. ACID compliance reduces
anomalies and protects the integrity of your database by prescribing
exactly how transactions interact with the database. Generally, NoSQL
databases sacrifice ACID compliance for scalability and processing
speed, but for many e-commerce and financial applications, an ACIDcompliant database remains the preferred option.
2. Your data is structured and unchanging. If your business is not
experiencing massive growth that would require more servers and if
you’re only working with data that is consistent, then there may be no
reason to use a system designed to support a variety of data types and
high traffic volume.
Reasons to use NoSQL database
When all the other components of our application are fast and seamless,
NoSQL databases prevent data from being the bottleneck. Big data is
contributing to a large success for NoSQL databases, mainly because it
handles data differently than the traditional relational databases. A few
popular examples of NoSQL databases are MongoDB, CouchDB, Cassandra,
and HBase.
1. Storing large volumes of data that often have little to no structure. A
NoSQL database sets no limits on the types of data we can store
together and allows us to add new types as the need changes. With
document-based databases, you can store data in one place without
having to define what “types” of data those are in advance.
2. Making the most of cloud computing and storage. Cloud-based storage
is an excellent cost-saving solution but requires data to be easily spread
across multiple servers to scale up. Using commodity (affordable,
smaller) hardware on-site or in the cloud saves you the hassle of
additional software and NoSQL databases like Cassandra are designed
to be scaled across multiple data centers out of the box, without a lot of
headaches.
3. Rapid development. NoSQL is extremely useful for rapid development
as it doesn’t need to be prepped ahead of time. If you’re working on
quick iterations of your system which require making frequent updates
to the data structure without a lot of downtime between versions, a
relational database will slow you down.
CAP Theorem
CAP theorem states that it is impossible for a distributed software system to
simultaneously provide more than two out of three of the following
guarantees (CAP): Consistency, Availability, and Partition tolerance. When we
design a distributed system, trading off among CAP is almost the first thing
we want to consider. CAP theorem says while designing a distributed system
we can pick only two of the following three options:
Consistency: All nodes see the same data at the same time. Consistency is
achieved by updating several nodes before allowing further reads.
Availability: Every request gets a response on success/failure. Availability is
achieved by replicating the data across different servers.
Partition tolerance: The system continues to work despite message loss or
partial failure. A system that is partition-tolerant can sustain any amount of
network failure that doesn’t result in a failure of the entire network. Data is
sufficiently replicated across combinations of nodes and networks to keep the
system up through intermittent outages.
We cannot build a general data store that is continually available,
sequentially consistent, and tolerant to any partition failures. We can only
build a system that has any two of these three properties. Because, to be
consistent, all nodes should see the same set of updates in the same order.
But if the network suffers a partition, updates in one partition might not make
it to the other partitions before a client reads from the out-of-date partition
after having read from the up-to-date one. The only thing that can be done to
cope with this possibility is to stop serving requests from the out-of-date
partition, but then the service is no longer 100% available.
Consistent Hashing
Distributed Hash Table (DHT) is one of the fundamental components used in
distributed scalable systems. Hash Tables need a key, a value, and a hash
function where hash function maps the key to a location where the value is
stored.
index = hash_function(key)
Suppose we are designing a distributed caching system. Given ‘n’ cache
servers, an intuitive hash function would be ‘key % n’. It is simple and
commonly used. But it has two major drawbacks:
1. It is NOT horizontally scalable. Whenever a new cache host is added to
the system, all existing mappings are broken. It will be a pain point in
maintenance if the caching system contains lots of data. Practically, it
becomes difficult to schedule a downtime to update all caching
mappings.
2. It may NOT be load balanced, especially for non-uniformly distributed
data. In practice, it can be easily assumed that the data will not be
distributed uniformly. For the caching system, it translates into some
caches becoming hot and saturated while the others idle and are
almost empty.
In such situations, consistent hashing is a good way to improve the caching
system.
What is Consistent Hashing?
Consistent hashing is a very useful strategy for distributed caching system
and DHTs. It allows us to distribute data across a cluster in such a way that
will minimize reorganization when nodes are added or removed. Hence, the
caching system will be easier to scale up or scale down.
In Consistent Hashing, when the hash table is resized (e.g. a new cache host
is added to the system), only ‘k/n’ keys need to be remapped where ‘k’ is the
total number of keys and ‘n’ is the total number of servers. Recall that in a
caching system using the ‘mod’ as the hash function, all keys need to be
remapped.
In Consistent Hashing, objects are mapped to the same host if possible.
When a host is removed from the system, the objects on that host are shared
by other hosts; when a new host is added, it takes its share from a few hosts
without touching other’s shares.
How does it work?
As a typical hash function, consistent hashing maps a key to an integer.
Suppose the output of the hash function is in the range of [0, 256). Imagine
that the integers in the range are placed on a ring such that the values are
wrapped around.
Here’s how consistent hashing works:
1. Given a list of cache servers, hash them to integers in the range.
2. To map a key to a server,
• Hash it to a single integer.
• Move clockwise on the ring until finding the first cache it
encounters.
• That cache is the one that contains the key. See animation below
as an example: key1 maps to cache A; key2 maps to cache C.
1 of 5
To add a new server, say D, keys that were originally residing at C will be
split. Some of them will be shifted to D, while other keys will not be touched.
To remove a cache or, if a cache fails, say A, all keys that were originally
mapped to A will fall into B, and only those keys need to be moved to B;
other keys will not be affected.
For load balancing, as we discussed in the beginning, the real data is
essentially randomly distributed and thus may not be uniform. It may make
the keys on caches unbalanced.
To handle this issue, we add “virtual replicas” for caches. Instead of mapping
each cache to a single point on the ring, we map it to multiple points on the
ring, i.e. replicas. This way, each cache is associated with multiple portions of
the ring.
If the hash function “mixes well,” as the number of replicas increases, the
keys will be more balanced.
Long-Polling vs WebSockets vs ServerSent Events
What is the difference between Long-Polling, WebSockets, and ServerSent Events?
Long-Polling, WebSockets, and Server-Sent Events are popular
communication protocols between a client like a web browser and a web
server. First, let’s start with understanding what a standard HTTP web request
looks like. Following are a sequence of events for regular HTTP request:
1. The client opens a connection and requests data from the server.
2. The server calculates the response.
3. The server sends the response back to the client on the opened
request.
Request
[Not supported by viewer]
Response
Client
Server
HTTP Protocol
Ajax Polling
Polling is a standard technique used by the vast majority of AJAX
applications. The basic idea is that the client repeatedly polls (or requests) a
server for data. The client makes a request and waits for the server to
respond with data. If no data is available, an empty response is returned.
1. The client opens a connection and requests data from the server using
regular HTTP.
2. The requested webpage sends requests to the server at regular
intervals (e.g., 0.5 seconds).
3. The server calculates the response and sends it back, just like regular
HTTP traffic.
4. The client repeats the above three steps periodically to get updates
from the server.
The problem with Polling is that the client has to keep asking the server for
any new data. As a result, a lot of responses are empty, creating HTTP
overhead.
Request
Response
Request
Response
Request
Response
Server
Client
Ajax Polling Protocol
HTTP Long-Polling
This is a variation of the traditional polling technique that allows the server to
push information to a client whenever the data is available. With LongPolling, the client requests information from the server exactly as in normal
polling, but with the expectation that the server may not respond
immediately. That’s why this technique is sometimes referred to as a
“Hanging GET”.
• If the server does not have any data available for the client, instead of
sending an empty response, the server holds the request and waits
until some data becomes available.
• Once the data becomes available, a full response is sent to the client.
The client then immediately re-request information from the server so
that the server will almost always have an available waiting request
that it can use to deliver data in response to an event.
The basic life cycle of an application using HTTP Long-Polling is as follows:
1. The client makes an initial request using regular HTTP and then waits
for a response.
2. The server delays its response until an update is available or a timeout
has occurred.
3. When an update is available, the server sends a full response to the
client.
4. The client typically sends a new long-poll request, either immediately
upon receiving a response or after a pause to allow an acceptable
latency period.
5. Each Long-Poll request has a timeout. The client has to reconnect
periodically after the connection is closed due to timeouts.
Request
Request
Response
Request
Response
Response
Client
Server
Long Polling Protocol
WebSockets
WebSocket provides Full duplex communication channels over a
single TCP connection. It provides a persistent connection between a client
and a server that both parties can use to start sending data at any time. The
client establishes a WebSocket connection through a process known as the
WebSocket handshake. If the process succeeds, then the server and client
can exchange data in both directions at any time. The WebSocket protocol
enables communication between a client and a server with lower overheads,
facilitating real-time data transfer from and to the server. This is made
possible by providing a standardized way for the server to send content to
the browser without being asked by the client and allowing for messages to
be passed back and forth while keeping the connection open. In this way, a
two-way (bi-directional) ongoing conversation can take place between a
client and a server.
Server
Client
WebSockets Protocol
Server-Sent Events (SSEs)
Under SSEs the client establishes a persistent and long-term connection with
the server. The server uses this connection to send data to a client. If the
client wants to send data to the server, it would require the use of another
technology/protocol to do so.
1. Client requests data from a server using regular HTTP.
2. The requested webpage opens a connection to the server.
3. The server sends the data to the client whenever there’s new
information available.
SSEs are best when we need real-time traffic from the server to the client or
if the server is generating data in a loop and will be sending multiple events
to the client.
Server
Client
Server Sent Events Protocol
Download