SETUP COMPUTER SERVER
AFTER PEER-TO-PEER NETWORKING
* SERVER ROLES INSTALLATION
*ACTIVE DIRECTORY DOMAIN SERVICES (ADDS)
DOMAIN NAME SERVICES (DNS)
PROCEDURES:
1. CLICK START
-> TYPE "DCPROMO"
-> PRESS ENTER
2. CLICK USE ADVANCED MODE INSTALLATION
-> CLICK NEXT
3. CLICK NEXT
4. CLICK CREATE A NEW DOMAIN IN A NEW FOREST
-> CLICK NEXT
5. PROVIDE FULLY QUALIFIED DOMAIN NAME (FQDN)
E.G. nelvinportal.com
-> CLICK NEXT
6. CLICK NEXT (Net BIOS Name)
7. FOREST FUNCTIONAL LEVEL (Windows Server 2003)
-> CLICK NEXT
8. DOMAIN FUNCTIONAL LEVEL (Windows Server 2003)
-> CLICK NEXT
9. CLICK NEXT (DNS INSTALLATION)
10. CLICK YES
11. CLICK NEXT
12. PROVIDE THE PASSWORD FOR DIRECTORY RESTORE MODE
E.G. Password12345
-> CLICK NEXT
13. CLICK NEXT
14. CLICK REBOOT ON COMPLETION
* DNS SERVER CONFIGURATION (NETWORK ADAPTER)
PROCEDURES:
1. OPEN NETWORK AND SHARING CENTER
2. CLICK CHANGE ADAPTER SETTINGS
3. RIGHT CLICK ON THE ADAPTER THAT
YOU WANT TO CONFIGURE
-> CLICK PROPERTIES
4. DOUBLE CLICK INTERNET PROTOCOL VERSION 4 (TCP/IPv4)
5. CHANGE THE PREFERRED DNS SERVER IP INTO THE
IP ADDRESS OF THE SERVER
E.G. 127.0.0.1 TO 192.168.0.2
6. CLICK OK
7. CLICK OK
* DNS SERVER CONFIGURATION (ROLE)
PROCEDURES:
1. CLICK START
-> TYPE "DNS"
-> PRESS ENTER
2. EXPAND (+) SERVER NAME
3. CLICK REVERSE LOOKUP ZONE
4. RIGHT CLICK REVERSE LOOKUP ZONE
-> CLICK NEW ZONE
5. CLICK NEXT
6. CLICK NEXT (PRIMARY ZONE)
7. CLICK NEXT (TO ALL DNS SERVER RUNNING ON
DOMAIN CONTROLLER IN THIS DOMAIN)
8. CLICK NEXT (IPv4 LOOKUP ZONE)
9. PROVIDE THE NETWORK ID
E.G 192.168.0
-> CLICK NEXT
10. CLICK ALLOW BOTH NONSECURE AND SECURE
DYNAMIC UPDATES
-> CLICK NEXT
11. CLICK NEXT
12. CLICK FINISH
* VALIDATE AND REGISTER DNS
PROCEDURES:
1. CLICK START
-> TYPE CMD
-PRESS ENTER
2. TYPE "IPCONFIG /REGISTERDNS"
-> PRESS ENTER
3. TYPE "NSLOOKUP"
-> PRESS ENTER
* DOMAIN USER ADDITION (2 USERS FOR CLIENT COMPUTERS)
PROCEDURES:
1. CLICK START
-> TYPE "USERS"
-> PRESS ENTER
2. EXPAND (+) YOUR DOMAIN NAME
3. CLICK USERS
4. CLICK CREATE NEW USER IN THE CURRENT
CONTAINER BUTTON ON THE STANDARD TOOLBAR
5. PROVIDE THE FOLLOWING USER CREDENTIALS
FIRSTNAME
INITIAL
:James
:C
LASTNAME
:Juan
*USER LOGON NAME :james01
-> CLICK NEXT
6. PROVIDE AND RETYPE PASSWORD
E.G. Password12345
7. UNCHECK OPTION 1
8. CHECK OPTION 2 AND OPTION 3
9. CLICK NEXT
10. CLICK FINISH
* PRINT AND DOCUMENT SERVICES INSTALLATION
AND CONFIGURATION
* MAKE SURE THAT THE PRINTER IS CONNECTED TO
SERVER AND IS TURNED ON.
PROCEDURES:
1. OPEN SERVER MANAGER
2. CLICK ROLES
-> CLICK ADD ROLES
3. CLICK SKIP THIS PAGE BY DEFAULT
-> CLICK NEXT
4. CHECK PRINT AND DOCUMENT SERVICES
-> CLICK NEXT
5. CLICK NEXT
6. CLICK NEXT (CHECK PRINT SERVER)
7. CLICK INSTALL
8. CLICK CLOSE
* PRINTER DRIVER INSTALLATION AND CONFIGURATION
PROCEDURES:
1. CLICK START
-> TYPE "PRINT"
-> PRESS ENTER
2. EXPAND (+) PRINT SERVERS
3. EXPAND (+) SERVER NAME
4. CLICK PRINTERS
5. RIGHT CLICK PRINTERS
-> CLICK ADD PRINTER
6. CLICK ADD A NEW PRINTER USING
AN EXISTING PORT
7. ON THE DROPDOWN LIST,
SELECT "USB001 (VIRTUAL PRINTER PORT
FOR USB)"
-> CLICK NEXT
8. CLICK INSTALL A NEW DRIVER
-> CLICK NEXT
9. SELECT THE PRINTER MANUFACTURER AND
THE PRINTER MODEL
MANUFACTURER
PRINTER
: EPSON
: EPSON LX-300+ /II
-> CLICK NEXT
10. CLICK NEXT (PRINTER NAME AND
SHARING SETTINGS)
11. CLICK NEXT
12. CLICK FINISH
* PRINTER DEPLOYMENT
PROCEDURES:
1. CLICK START
-> TYPE "PRINT"
-> PRESS ENTER
2. EXPAND (+) PRINT SERVERS
3. EXPAND (+) SERVER NAME
4. CLICK PRINTERS
5. RIGHT CLICK ON THE NEWLY INSTALLED
PRINTER (EPSON LX-300+ /II)
-> CLICK DEPLOY WITH GROUP POLICY
6. CLICK BROWSE
-> CLICK DEFAULT DOMAIN POLICY
-> CLICK OK
-> CHECK OPTION 1 AND OPTION 2
*-> CLICK ADD
7. CLICK APPLY
8. CLICK OK
9. CLICK OK
* DHCP SERVER INSTALLATION AND CONFIGURATION
DHCP (DYNAMIC HOST CONFIGURATION PROTOCOL)
PROCEDURES:
1. OPEN SERVER MANAGER
-> CLICK ROLES
-> CLICK ADD ROLES
2. CHECK DHCP SERVER
-> CLICK NEXT
3. CLICK NEXT
4. CLICK NEXT
5. CLICK VALIDATE
-> CLICK NEXT
6. CLICK NEXT
7. CLICK NEXT
8. CLICK DISABLE DHCPv6 STATELESS MODE
FOR THIS SERVER
-> CLICK NEXT
9. CLICK NEXT
10. CLICK INSTALL
11. CLICK CLOSE
* DHCP SCOPE CONFIGURATION
PROCEDURES:
1. CLICK START
-> TYPE DHCP
-> PRESS ENTER
2. EXPAND (+)SERVER_NAME.DOMAIN_NAME
3. CLICK IPv4
4. RIGHT CLICK IPv4
-> CLICK NEW SCOPE
5. CLICK NEXT
6. TYPE THE SCOPE NAME
E.G. Server-Scope
-> CLICK NEXT
7. PROVIDE THE FOLLOWING SETTINGS
START IP
END IP
: 192.168.0.10
: 192.168.0.254
-> CLICK NEXT
8. CLICK NEXT (EXCLUSIONS AND DELAY)
9. CLICK NEXT (LEASE TIME)
10. CLICK NEXT
11. PROVIDE THE DEFAULT GATEWAY IP (ROUTER)
E.G. 192.168.0.1
-> CLICK ADD
-> CLICK NEXT
12. CLICK NEXT
13. CLICK NEXT
14. CLICK NEXT
15. CLICK FINISH
* WINDOWS SERVER BACKUP FEATURE INSTALLATION
AND CONFIGURATION
PROCEDURES
1. CLICK SERVER MANAGER
-> CLICK FEATURES
-> CLICK ADD FEATURES
2. CLICK SKIP THIS PAGE BY DEFAULT
-> CLICK NEXT
3. CHECK WINDOWS SERVER BACKUP FEATURES
-> CLICK NEXT
4. CLICK INSTALL
5. CLICK CLOSE
* REMOTE DESKTOP INSTALLATION AND CONFIGURATION
PROCEDURES
1. OPEN SERVER MANAGER
-> CLICK ROLES
-> CLICK ADD ROLES
2. CHECK REMOTE DESKTOP SERVICES
*-> CLICK INSTALL
-> CLICK NEXT
3. CLICK NEXT
4. CHECK REMOTE DESKTOP SESSION HOST
-> CLICK INSTALL DESKTOP SESSION
HOST ANY WAY
-> CLICK NEXT
5. CLICK NEXT
6. CLICK DO NOT REQUIRE NETWORK LEVEL AUTHENTICATION
-> CLICK NEXT
7. CLICK NEXT
8. CLICK NEXT
9. CLICK NEXT
10. CLICK INSTALL
11. CLICK CLOSE
12. CLICK YES (RESTART)
13. AFTER RESTART,
-> CLICK CLOSE