Uploaded by Wyndia Kayombo

Commerce Notes - Simwanza-1

advertisement
Page 1 of 89
INTRODUCTION TO COMMERCE




Commerce is trade and aids to trade or all activities that aids the distribution of goods and services
from the primary production to the consumer.
TRADE
Trade is the buying and selling of goods and services with view of making profit. Trade is divided
into two categories, which is home and foreign trade.
Home trade is trade done within a country and is divided into retail and wholesale trade, retail trade
is the selling of goods in small quantities while wholesaling is the selling of goods in bulk (large
quantities). The person who sells goods in large quantities is called the wholesaler.
Foreign trade is trade done between two or more countries (outside) and is divided into imports and
exports. Exports are the goods going out of the country while imports are the goods coming into the
country. Aids to trade exist to help trade to function, if there was no trade there would be less reason
for the aids to trade to exist but commerce would still exist because it also assists primary and
secondary industry to function
THE PURPOSE OF COMMERCE
The purpose of commerce is to satisfy human needs and wants.
It aims to organise the most efficient distribution of goods and services in order to satisfy the human needs
and wants, where as trade aims at making profit. Profit is the reward of doing trade.
Aids to Trade
Commercial activities are essential to those engaged in Secondary Industries such as a
Manufacturer of textiles in the following ways:
Trade is essential to those engaged in Secondary Industries to buy/purchase, raw materials
Such as cotton and selling of finished products goods such as blankets in order to make a profit
The meaning of commercial activities
Includes all activities concerned with the distribution of goods and services and raw
materials or partly finished products
At all stages of production
And includes trade and aids to trade
That is Banking, Insurance, warehousing, advertising, transport and communication
Trade is essential for the purchase of raw materials/finished goods
And sale of goods and services at a profit
Advertising
to obtain information on sources and suppliers/where to get goods for sale or the raw materials to
be used in the industry
to persuade potential customers to buy goods and services available on the market
increases the sales
to advertise for workers/job vacancies/recruiting required staff
to give information to customers
it can be by television, radio, newspapers, electronic mail (e-mail), telegram, fax, magazines, posters
etc.
Banking
is essential for depositing receipts from sales
It facilitates payments, through credit transfer, standing orders, discounting bills of exchange,
cheques and direct debit .
provides finance for the customers who are in need of more money through loans and overdrafts
Communication
is essential to contact suppliers of raw materials and customers
1
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 2 of 89
-
and to settle queries or payments,
allows customers to place orders
organises survey to promote business activities
allows all forms of business information to travel and finalise their transactions through telephone,
Electronic-mail, telex, fax, internet, letter, data post, cellular phone
Insurance
is essential to provide security or cover (indemnify) or compensate
against any financial losses of building, raw materials, finished goods, equipment from fire, damage
of goods in transit/theft
to cover claims from third parties such as employers liability and public liability
Transport
is necessary to delivery/carry raw materials and equipment to the industries
moves employees to and fro work
carries finished products to the market
it can be by road, rail, sea, and air.
Warehousing
is essential for the storage/keeping of raw materials awaiting procession
and finished goods/products awaiting demand or orders from the customers as some goods are
seasonal such as Jerseys, raincoats
It protect from adverse weather conditions and deterioration etc.
It allows production to take place in anticipation of demand
It evens out prices/avoids price fluctuations and helps to prevent shortages
It protects the goods from adverse weather conditions
Production
The Meaning of Production
-
-
Production covers all activities, which contributes to the satisfaction of the consumers’ demand for
goods and services or needs and wants or gives utilities can be defined as the provision of goods
and services to satisfy human needs and wants.
This includes industry both primary (obtains raw materials from nature) and secondary
industries(processes raw material into finished products) ,
Commerce is trade and aids to trade,
Concerned with the distribution of goods from the producer to the consume
and direct service, provides personal and public services to individual citizens
such as education provided by the teachers, health care provided by nurses and doctors, legal
advice provided by the lawyers, security provided by police officers and entertainment provided
by the actors.
The three branches of production
An industry is a branch of production that deals with the extraction raw materials/natural resources from the
ground and process/convert/transform them into semi finished or finished products (goods)
Commerce is trade and aids to trade, is the branch of production that deals with the distribution of goods and
services from the industry(place of extraction or manufacturing) to the Consumers/place of demand/scarcity
Direct service is a branch of production that plays an indirect role in production and whose services are
essential in enhancing production. It provides personal and public services to individual citizens. These
includes teachers, doctors, nurses, policemen, lawyers and any service rendered by service providers.
How the three branches of production are linked to each other
all branches contribute to production either indirectly or directly
they are interdependent in their roles
2
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 3 of 89
-
as they bring about the provision of goods and services in order to have utility/satisfy human needs
and wants
goods extracted/produced must be taken/distributed through trade and aids to trade
in the process roles of policemen needed to maintain law and order may be needed, roles of lawyers
to uphold justice may be needed, medical facilities provided by nurses and doctors may be needed
by producers and manufacturers as well as other service providers
The Effects of the industry on the environment
it causes soil acidity and infertility
waste disposal
unplanned settlement
causes pollution, (air, water and noise)
occupational health hazards (radiation)
Possible solutions to environmental pollution
government policy
Civic education
Provision of public utilities
Provision of dust bins
Provision of posters in the industrial area.
Human Needs and Wants
Needs
These are basic that that we require in order for us to survive (survival motive) or the things that we can not
do without. There are three basic human needs, that is, food, shelter and clothes. To deny one food, shelter
and clothes is actually the violation of human rights.
Wants
These are the things that we need in order to improve the quality or standard of our life or to live a more
meaningful, enjoyable and luxurious life. We can do without them. This includes a radio or a television to
provide us with news and entertainment, a car to move us to far places, a refrigerator to keep our drinks or
food cool, a cellular phone to contact or talk to our friends and relatives. We can not die without these things.
Goods and Services
All these things which we need in our day to day life are called goods and services. Goods are the physical or
the tangible things that we can see, touch, and weigh or measure. Services on the other hand refers to the
work done by other people, they are intangible (we can not see them or touch them) such as medical treatment,
entertainment, security, tourism and transport.
The Role of Commerce in Production
Buying of raw materials, spare parts and machinery
Distributing goods from the producer to the consumer
This is done by retailers, wholesalers, importers and exporters
With the help of transport, warehousing, banking, advertising, communication and insurance.
TYPES OF PRODUCTION
(a) Direct Production
This is the production of goods for one’s own use
It is done on subsistence level without need for exchange/trade
it directly satisfies one’s needs and wants such as a farmer who grows only enough maize or keeps
enough live stock for his own consumption is involve in direct production.
If people where to provide all that they need by themselves, they would little or no need for trade.
In other words they would be self sufficient
3
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 4 of 89
(b)
Indirect Production
This is the production of goods for the benefit of others/sale.
It involves trading of what has been produced so as to obtain what one can not produce.
Therefore it depends on trade and makes people to specialise In one field so as to sell their value.
This is the most common type of production in the modern society, where few people satisfy their
needs directly by themselves.
In this type of production people co-operate with each other to satisfy the needs or wants of
everyone.
People usually engage in one particular occupation which they are best suited and sell their
products or labour in exchange of the goods or services they need.
For example a farmer sells his farm products to other people like doctors to obtain medical services
or even to buy machinery to be used on the farm.
-
STAGES OF PRODUCTION
Production whether direct or indirect can be placed into three stages. These are primary, secondary and
tertiary production.
(a)
Primary Production
This is the first stage of production.
It is concerned with the extraction of natural resources from the ground.
These are either above or underground. The term natural resources includes: The minerals underground
 Fish in the water
 Trees in the forest
 Animals in the wild
 Fertile soil and good climate
Most of the outputs of the primary production are in raw or unusable form. Generally, the products
obtained at this stage have to go the secondary stage of production for processing in more useful goods
except for some farm products such as apples, water melons, oranges, peaches can be eaten straight from the
farm
(b)
Secondary Production
This is the second stage of production. It is the transforming of raw materials into semi finished or
finished goods. It consists of manufacturing and construction industries
(i) Manufacturing Industries
This is the transformation of raw materials into useable products such as the making of shoes, biscuits,
vehicles, clothes, blankets, television sets and radios. In some cases the raw materials are turned into semi
manufactured goods into one factory and then sent to another factory to be finished into a better and more
complex product. For example a steel industry makes steel and sends it to the car-manufacturing factory to
manufacture car parts before they are assembled into a car, which is very useful to us.
(ii) Construction
This includes building of roads, bridges, houses and other construction work. This process uses both
products from the primary and secondary industries to assemble or build a house, bridge or dams. The
builder for example uses rocks extracted by quarrying, cement extracted by mining, timbers extracted by
forestry, steel, paint, roofing sheets, window glasses and nails obtained from manufacturing and many
others to build a house.
© Tertiary Production
This is the third and last stage of production. It involves the provision of services that helps in the
transfer of finished goods from the factory to the consumer. There are two services involved. Firstly the
commercial services which involves storing of goods, transporting them, advertising them, insuring,
providing finance and selling them. Secondly, there are also direct services, which plays an indirect role.
For instance, the services of the doctor, policemen, nurses, doctor, musicians, actors, lawyers, architects and
sportsmen may appear to be remote from the process of production and distribution of goods, but they are
4
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 5 of 89
not. Doctors and nurses, for instance, make invaluable contribution to production, by making people health,
strong and ready to work, they indirectly aid production.
FACTORS OF PRODUCTION
Before the goods and services are produced, there must be capital, someone with the idea or the skill to
organise the business, land and labour. These are referred to as the factors of production.
Capital
-
includes money, buildings, machinery, raw materials used to produce further goods
and all man made assets used in the production of goods and services.
Providers of capital are called capitalists/investors
Capital can be accumulated by savings.
The reward for capital is called interest.
Enterprise or organisation
The ability to organise the other factors of production
Enterprise involves making decisions
Such as expansion of the business, ploughing back, buying a new motor vehicle
For production to take place, someone must have the idea and the skill to organise, direct and
control the production process.
This person/provider is known as the entrepreneur or organiser. He is responsible for deciding
what should be produced, how to produce it, where and when to produce it. This decision involves
risks and a special skill.
The entrepreneur gets profit/loss as his/her reward.
Labour
Land
-
-
This is human effort or energy made/used in the production of goods and services.
It can be manual(physical) and skilled(or mental) labour. Labour is limited in supply.
Providers of labour are called workers
workers receive/get a wage or salary as their reward for labour
includes all kinds of natural resources found on earth and underground
Land refers to buildings, minerals underground, rocks of the crust, fish in the water, trees and all
other natural resources. It therefore, includes the earth and the oceans and everything which grows
in them.
Providers of land are called landlords
Landlords receive rates/rents/loyalties as their reward
The Meaning of Specialisation
-
-
It is the concentration by an individual on a specific task or occupation or on a narrow range of
work within a particular occupation for which their ability or resources best suits them
Such as Teachers, doctors, nurses, lawyers, engineers and farmers
Specialisation does not only apply to individuals but also to countries/regions producing goods or
services for which they are best suited
Such as Malawi specialises in tea production, Botswana wool, Mwinilunga in pineapple and china
in rice
It allows division of labour to take place
It leads to greater skill and efficiency amongst workers and increased output.
Specialisation depends on trade and trade depends on specialisation
if a person concentrates in only one specific task/product or performing one task,
s/he may rely/depend on others to produce needs/wants which s/he does not produce,
for example, a farmer depends on the medical doctor for health and the medical doctor depends on
the farmer for food,
5
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 6 of 89
-
these can only be obtained by selling his/her surplus labour in order to buy the goods and
services required for his/her daily survival/living.
Therefore, without trade specialisation could not take place
and individuals would have been self sufficient/reliant, that is, provide all they need by themselves.
Advantages of Specialisation
workers become skilled
workers become efficient
it leads to increased output/high production (mass production)
time is saved because workers do not have to move from one operation to another
training is easy as jobs are easy to learn
everyone’s ability is made use of
development of specialist machinery to perform the specialised task becomes easier
labour is potentially more mobile as it is often possible to employ people who do not need
any related qualification and the tasks are simple and easy to learn
Disadvantages/dangers of Specialisation
work becomes boring
individual skill and crafts are lost due to use of machinery
creates unemployment as greater use of machinery leads to unemployment
there is inability of slow workers to keep pace with others as the gap between management
and workers tend to be widened
Products are all the same as the machine takes over, the goods are made in standard sizes
and the choice of goods available to the consumer becomes limited.
workers become dependent on each other (in case of illness, production is disrupted)
it is difficulty to find employment after loss of job due to limited skills
discontent among workers may lead to low productivity
Occupational hazard/there is a risk of contracting diseases, eg. Those in asbestos industry
risk contracting cancer.
Possible solutions to occupation hazards/dangers
have constant medical check ups for workers
provide protective clothing
provide milk for workers
deliberate government policy
provide entrepreneurship
HOME TRADE
RETAIL TRADE
Retailing is the selling of goods in small quantities to suit the requirements of the consumers. A person who
sells the goods in small quantities is called the retailer.
6
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 7 of 89
EFFECTS OF RETAIL ON THE ENVIROMENT
 They cause poor urban sanitation
 Results in the mushrooming of street vendors
 Results in unnecessary littering of the environment
 Causes unnecessary squatting
 becomes health hazard such as cholera, air pollution and water pollution
POSSIBLE SOLUTION TO EFFECTS OF RETAILING ON THE ENVIRONMENT
 Deliberate Government policy such as keep Zambia clean campaign
 Civic education
 Provision of dust bins/rubbish pits
 Provision of public utilities such as toilets
 Building more markets
Functions of the retailer

selling to customers/breaking bulk, the retailer buys the goods in large quantise from the wholesale or the
manufacturer and then breaks them into smaller quantities to suit the consumers

buying from manufacturers/wholesalers,

offering variety of goods to meet the consumers wants

displaying goods in retail shops

pricing goods before selling them to consumers

preparing the goods for sale such as packaging them.

giving after sales services and pre-sales service

offering credit to trusted customers

giving advice/personal service to consumers especially on new goods

offers delivery service on some goods like furniture and refridgerators

advertising/promotions/special offers for his/her business to the public

providing goods in suitable quantity

supplying local needs to the consumers

acting as a link/middleman in the chain of distribution between the consumers and the wholesaler

to pass on information to wholesalers on consumers complaints, suggestions or praises on the products

opens his/her shop to suit the consumers
Factors influencing the choice of site/location
-
Cost of site in relation to anticipated turnover and profit, that is town centre site too
expensive
Is there any competition with the same type of shops nearby
Are there sufficient customers in the area requiring sports equipment
Is the site in the shopping area that is, are there nearby shops to attract passing trade
Is there any possibility of trade growth in the area as a result of population growth or
employment
Security of the shop
Prices of the goods, the prices of the goods should be within what the customers or
consumers can afford to buy(within the income of the consumer)
Accessibility of the shop, the shop should be easily be accessible by the consumers with less
difficulties
If there is good communication and transport network and easy accessibility to transport
source of supply, the shop should be located where there is reliable source of supply for
goods wanted by the consumers
Whether the site is in the busy area , for example a shopping mall at the road
junction or simply in an area where it is able to attract passing trade.
Other factors to be considered if the business is to successful
-
experience, have you sufficient experience in business
Capital have you sufficient capital or the source of capital to meet the demands of the business
envisaged and to avoid daily cash flow problems
advertising policy what advertising policy may be necessary
7
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 8 of 89
-
prices or range of goods ,what prices or range of goods are suitable for the area in order to avoid
slow lines
What quantity will be required to avoid overstocking
prices or range of goods, what prices or range of goods is to be used
Method of Sale, whether sales assistants will be required or whether some degree of self service may
be operated
Whether to deal on the cash basis only or to give credit
layout for the store, what would be the best form of layout for the store or the best way to display
the goods/equipment
What make up will be required to make the required profit
Opening and closing time must suit the customers
Legal requirements
Name of the shop, the name of the shop must be easy to remember and eye catching
HINTS ON HOW TO IMPROVE THE BUSINESS

The service offered must be good with a smile

Prices should be as competitive (low) as possible

Quality products should be worth the price

Provide a wide variety of goods and services

The shop should be clean and attractive

The goods should be well displayed in appropriate sections

If possible find a better supplier offering better terms

Improve on the facilitation of after sales service

Improve on the credit buying rates to the customers

Advertise locally
Factors to consider when expanding the business
-
Have a vision of what you are going to do
Concentrate on your original idea. Avoid diverging your line of business
Expand in bits. Do not be too ambitious
There might be need for finding new ways of doing things, for example, as the business grows, there
might be need for delegation. You might need to employ the manager to manage the business
because good entrepreneurs are not always good managers
See to it that there is enough structures to accommodate the expansion
Focus on your core customers
Keep record of your business activities
Make sure there is enough cash coming into the business as you spend money on expansion
TRENDS IN RETAILING
Retail trade has undergone through a number of changes in recent. Trends are changes or developments which
have taken place in retail trade
The main changes has been due to the following reasons:
The change in the pattern of spending due to the rising in the standard of living
Fewer customers now request for the delivery service resulting in lowering the retailers cost
the quickening pace of modern life and shopping
The growing pressure of competition among retailers and rising labour costs.
The need to save/cutting intermediary costs
New technological development which has brought about the use of cash registers, computers
which are now widdely used in computerised stock control
PREPACKAGING
Pre-packaging is the putting of goods in distinctive packets of standard sizes such as boxes, bottles, wrappers,
tins, cartons etc. by the manufacturer before (prior) selling them to wholesalers, retailers or consumers. It
allows a customer to handle the goods without damaging the content.
The reasons for prepackaging the goods includes the following:

to facilitate the branding of the goods, that marking names on the goods

to give a longer shelf life to the goods

to facilitate self service of the googs

to allow the goods to be put in amounts suitable for the consumers

to prevent damage to the goods while they are in transit or in store
8
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 9 of 89







to reduce the possibility of goods being contaminated
to make transportation, storage and display of the goods easier
to attract the customers with distinctive packaging
to protect the goods when handled by the customers
to save time of weighing and wrapping goods each time customers ask for them
to help in advertising of the goods
to allow customers easily identify goods they need
The effect of prepackaging on retail trade

it has contributed to the development of self service

as goods can be displayed on the shelves and remain there for a long time

and customers can serve themselves

names of the products can easily be written on the packages
advantages of packaging to the manufacturer

Without packaging, the brand name could not be shown on the goods

The package may be made distinctive to attract customers

Packaging prevents damage to the goods both in sore and in transit

The goods may be packed in amounts suitable for the consumers

It make transportation and storage of goods easier

It preserves the life of goods over a longer period of time

It builds brand loyalty

It establishes the quality of the goods

It faciltates advertising
Advantages of prepackaging to the retailer

The goods have a longer shelf life, for example, tinned fish and Bonita milk can stay on the
shelves for months without going bad

as the goods are protected when handled by the customers

pretects the goods from contamination due to constant handling by consumers

Speeds up the service by eliminating the need for weighing and wrapping of the goods

It attracts the customers to buy the goods

Prevents goods from damage while in store or transit

It facilitates branding of goods

It facilitates advertising of goods

staff is kept at a minimum hence saving costs

Allows instruction to be written on the packag

It helps to build brand loyalty
Advantages of packaging to the consumer

Goods can easily be carried

Goods can easily be handled

Doods can easily be identified

Benefits from improved hygiene and preservation of the goods

Goods are packed in suitable amounts for the consumers

Requires less help from the shop assistant as the package contains relevant instructions

Goods may be cheaper
Disadvantages of packaging to the manufacturer/producer

More money is spent on the materials and decorative writing,

Therefore it may be wasteful in terms of money and other resources spent on it

Packaging materials may pollute the enviroment especially where empty cans, plastics,tins
and boxes are thrown anywhere

Much of the space in storage houses and transporting vehicles is taken up by packages
Disadvantage of Packaging to the Retailer

It is expensive and wasteful in terms of resources
BRANDING
Branding means the use of a name or mark to distinguish one producer’s product from another. It makes the
product unique and easy to identify.
9
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 10 of 89
Reasons for Branding

To enable the goods be identified

To allow the goods be advertised

To facilitate self service in retail shops

To assist producers in setting standards of quality for their goods

To build brand loyalty

To enable the goods be displayed on the shelves so that they can be sold in self service shops
The effects of branding on the Retail Trade

it has contributed to the development of self service

customers no longer depend on the shop assistants for the selection of goods(has resulted in
the elimination of personal service)

as customers are able to identify and choose the goods on their own
The advantages of branding to the manufacturer/producer
branding helps to distinguish its products from those of its competitors
once the brand name is registered, no other company may be allowed to use the same
name again
establishes the company’s name as representing a quality of standard of the goods
and may create a brand loyalty and reputation of the business
branding allows/enables the product to be advertised
branding facilitates display of the goods in a self service store.
Branding gives the goods an individual identity
Advantages of branding and prepackaging to the Retailer
The goods are more easily displayed and stacked/stored
it facilitates self service
as the customers can easily identify the goods without help from the staff
It facitates advertising of the goods
Customers can easily identify the goods
Possible reduction of shop assistants due to self service
Disadvantage of branding the manufacture or producer

More money is spent when advertising similar products in an effeffort to make an important
differences between them
Disadvantages of Branding to the Retailer

He may be forced to stock many brands of the same type of good in order to satisfy the
consumer,s needs

This may results in stock piling
Disadvantages of Branding to the consumer

may be forced to pay more due to the cost of advertising and packaging

excessive advertising campaigns to promote the sale of the brands may be false, misleading
and harmful to the consumers
Goods are purchased direct from the manufacturer because:

it is cheaper as goods are purchased in large quantity/bulk

it is sufficient to enable better terms to be negotiated than be obtained from the wholesaler
such as large trade discount, this allows goods to be sold at a lower price than a small retailer

in the case of supermarkets, the goods can be delivered direct to regional warehouses and
distributed direct according to branch requirements

supermarket chains are large enough to undertake the functions of the wholesaler
Shopping complexes
A shopping complex is a variety of shops in the same location, under different management and do not
compete directly with each other but work to stimulate business for one another. An example of a shopping
10
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 11 of 89
complex in Zambia is Manda Hill and Arcades situated along the great East Road in Lusaka. It is also referred
to as a shopping mall.
Advantages of a shopping complex to the:
(a)
Retailer
 shops do do compete directly with each other, but work to stimulate business for one
another.
 they are large enough to carry out national wide advertising to attract the customers from all
over the surrounding areas.
 they are located outside the town centers where land is cheap hence saving overhead costs
(b)
Consumers
 they purchase all their requirements from one place since there is a variety of shops in the
same locaation, such as chemists, department store, etc.
 they are locaated in free trafic areas
 they are easily accessible by the customers as they are near the bus stops
 they have extensive parking for the customers
 they also provide banking facilities and other additional ammenities such as restaurants and
entertainment like video shows.
 may offer competitive prices/goods may be low priced
 the atmospere is very conducive for shopping
Disadvantages of shopping complexes
 supermarkets at shopping complexes incur extra expenditures on providing parking
facilities and on the staff employed to retrieve the trolleys used to take the goods to the
nearby car park
 a large area of land is required for avariety of shops and car park
 consumers cover long distances to reach the shopping complexes and they have to pay for
taxi and mini bus fares.
SELF SERVICE
Self service is the method of selling where the goods are well displayed on the shelves within the easy reach of
the customers. It was firstly used in supermarkets, but nowadays it is used by main retail outlets.










CHARACTERISTICS/FEATURES OF SELF SERVICE
Goods are displayed on the shelves within the easy reach of the customers,
section by section or according to their families just lije books in the library
Customers serve themselves
Goods are usually prepacked, branded and priced in bar codes
Facilities such as trolleys and shopping baskets are provided for the customers to put their purchases
Customers pay at check outs/pay desks are installed near the exist where the customers pay from
It requires few sales assistants, mainly to replenish the stock
It requires large selling space, and large parking area
Loss leaders are used to attract customers into the shop
Customers save on time because they serve themselves
Impulse buying is common
The Development of Self Service
Self service has developed because it has benefits (advantages) to both the retailer and the
customer.
Advantages of self service to the Retailer
less staff is required (possible reduction) as customers serve themselves
thus saving on labour costs, tht is low wage bill to be paid
the use of loss leaders attracts customers into the shop
the staff requires less specialised knowledge as the goods are packaged and instructions
are written on them
it leads to impulse buying which results in high turnover and profit
Advantages of Self Service to the Consumer/customer
possibly quicker service (saves time)
has more time to browse and choose the goods at leisure without being pestered by the
salesmen
11
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 12 of 89
-
the consumer is able to compare brands
prices may be cheaper due to the use of loss leaders
goods are attractively displayed in relevant sections hence making it easier for the
customers to find the goods
Its development has further been aided by both prepackaging and branding which enables the
goods to be clearly be distinguished by the customers without assistance.
DISADVANTAGES OF SELF SERVICE to
the customer

May lead to (encourages) impulse buying

Lacks personal service/attention such as advice

It is not suitable for the old and illiterate people

Services such as delivery and/or credit may not easily be arranged, though credit may be
accepted through the use of credit card/cheque cards

The customer can not closely inspect the goods before buying them because they are usually
prepacked

May be delayed at check out points especially during peak shopping hours





The Retailer/Shop owner
More trading space is needed and this may lead to high overhead expenses, especially if the shop is
located in town centres
Pilferage or shop lifting is very common as the customers serve themselves and this may cause serious
losses to the retailer
The retailer have to incur additional costs in securing the shop shop lifting or thefts by customers
Constant handling of the goods may result in soiling and damages to the goods though they are
packaged
Needs more capital for the equipment such as baskets, trolleys, cash registers and display shelves.
ELECTRONIC COMMERCE (E-Commerce)





Electronic Commerce is the buying and selling of goods and services on internet.
Electronic commerce is also referred to as on line shopping.
Electronic commerce is one of the latest trends in retailing.
Electronic commerce is about using computers as on line shops.
On line shops are open for 24 hours a day and 7 days a week.
On line shops offer to customers and businesses a variety of high quality but cheap in price products such as first and
second hand cars, office equipment, furniture etc. Many business people purchase goods from on line shops for resale on
local markets.
A person wishing to purchase goods or services on internet has to visit the website of the on line shop or trader. Website
is an internet provider such as Yahoo, Hotmail, Excite etc.
When a person has found the goods or services he/she wants to buy, he/she will have to make payment. The following
are some of the modes of payment used for on line transactions:




Credit cards-The most popular method of payment for on line transactions
Bank transfers
Money transfers
Western Union etc.
Points to Consider when shopping on internet:
When shopping on internet, you should consider the following points:


Carry out background check on companies offering on line stores that you intend to deal with.
This will avoid internet fraud brought about by unscrupulous people who set up fake online stores that cheat
people out of their money.


Consider the legal terms of the online store you intend to deal with.
This will enable you to know the policies of the company on matters such as shipping, liabilities, refunds, delivery
policy etc.
12
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 13 of 89

Ensure that the website is secure when you send information like bank account details to online store. Where a
password is used, the word must have at least five letters for easy remembering. The password must not be
written down. This will prevent a wrong person from shopping at the online using your account.

It is advisable to start shopping on internet with small items and then move on to bigger
things.

Spend more time looking for new websites and deals on offer.
What is electronic commerce?
Electronic Commerce is the buying and selling of goods and services on internet.
Electronic commerce is also referred to as on line shopping using computers connected to the internet
through the world wide website.
Explain the advantages and disadvantage of Electronic Commerce to
(i)
the retailer or trader
(ii)
the consumer
Advantages of Electronic commerce to:
(i)
The owner of the online store (or retailer)
The whole world is one huge market for internet users. Thus the market for online store products is
worldwide.
Business is conducted by on 24 hours a day and 7 days a week.
Shop buildings do not need to be expensively furnished because customers do not visit them.
The online store may be located on outskirts of a town where land is cheaper.
Goods are not soiled or damaged in any way because customers do not handle them.
(ii)
-
The consumer
Electronic commerce is open for 24 hours a day and 7 days a week, and therefore consumers are able to
purchase goods and services at any time.
Consumers are able to purchase a variety of high quality goods, which are cheap in price and may not be
available locally.
Online stores offer convenient shopping from the comfort of a consumer’s home.
Internet customers are able to decide on how they want their goods packaged.
Online stores save consumers’ time and money from travelling to far places in search of goods.
No postage of letters for inquiries required.
Disadvantages of Electronic commerce to the owner of the online store(or retailer):
Many people find Electronic commerce too complex to use being the latest development in retailing.
Methods of payment for online transaction such as credit cards are not commonly used in most developing
countries like Zambia, thus limiting online business.
There is a possibility of credit card fraud.
-
-
Disadvantages of Electronic commerce to the consumer
Unscrupulous people may set up fake online stores that cheat consumers out of their money.
Many people do not have computers, and therefore may have access to internets.
Goods bought especially big items may take a long time to deliver.
Goods shown on internet may not be the exact goods delivered.
VOLUNTARY CHAINS
This is another change that has taken place in the retail trade. They are usually a group of independent retailers who have
joined with the wholesaler in order to reap the benefit of bulk buying. Members of the voluntary chain put their orders
together with the wholesaler who is also a member, the wholesaler is then able to buy goods in bulk from the producer at
factory price at a great discount.
CHARACTERISTICS OF A VOLUNTARY CHAIN

They are mainly found in grocery trade

They are normally organised by the wholesaler

Individual retailers place their orders together with the wholesaler, who then place a single order with the
manufacturer

The retailer gets the goods at factory price

Policy/decisions are taken by representatives elected to the management committee of the organisation
13
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 14 of 89






The group undertakes national advertising and provides the members with advertising leaflets and posters
Ratail shop member trade under nationally known labels
Member retail shop may commit themselves to purchasing goods from the parent wholesaler
There are some controls on the prices small retail shops may charge on the goods
Goods may be delivered straight to the small retail shops
Each member retail shop may remain a separate business entity, independently owned and controlled
Functions of the Voluntary Chain
enable a large number of small retailers to obtain the advantage of bulk buying
and to compete with large scale retailers if they agree to buy from certain wholesalers
advertising assistance is offered such as national advertising
credit/financial assistance may also be available
Advantages that may be obtained by a retailer who joins a voluntary chain
benefits from bulk buying by the wholesaler(s)
thus reducing prices paid by the retailers
Able to compete favourably with large scale retailers
goods may be delivered to the retailers
national wide advertising is undertaken
advertising display material are supplied
advice on stock display is given to the retailers
financial assistance such as loans for the improvements to the premises may be available
Advantages of Voluntary chain to the consumer

consumers are offered good quality service because of the minimum standard that may be set for member retail
shops

consumers may buy a variety of goods at reduced prices

thereby offering a great service especially to consumers in the village where large shops do not normally exisit\
Disadvantages of voluntary chains to the retailer

the parent wholesaler may control the prices charged to the consumers

member retail shops may not have total freedom to decide on the type of goods to sell
Disadvantages of voluntary chains to the consumer

prices may not be cheaper than those offered in large retail shops

some consumers may not like the range of goods decided upon for sale by voluntary chains
Trading Stamps

are used as a form of trade discount or price reduction

it is also one of the forms of sales promotion method
Reasons for using trading stamps

to promote the sales of the business

to encourage customer’s loyalty
How a Trading Stamp Scheme operates

stamp trading companies sell trading stamps to retailers who keep them in their shops

each tome a customer buys goods of a certain value, a retailer will stick the trading stamp in the specially
provided book

when the page is full the customer may convert the trading stamps either into cash or goods at a trading stamp
company
Adavantages of trading stamps to the stamp trading company

it makes profit on the sale of trading stamps

benefits from large discount obtained when buying goods in bulk meant for free gifts to customers
Advantages of trading stamps to the retailer

benefits from the increase in the sales of goods

encourages customers loyalty
Disadvantages of trading stamps to the retailer
14
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 15 of 89


cost of trading stamps increases business overheads
the retailer is inconvienced by the additional time and trouble of distributing trading stamps to consumers
Disadvantages of trading stamps to the consumer

may have difficulties in exchanging trading stamps for cash or goods

may pay for the cost of trading stamps in high price of goods

the consumer may be forced to accept goods not desired in exchange for trading stamps
Explain the meaning of Automatic Vending Machine;
-
it is a retail machine that releases items required when a coin/token is pressed in the slot
used in busy central sites such as hotels, bus and rail stations
sells the goods such as drinks, chocolates, cigarettes and stamps
can be hired or be bought
it is a labour saving retailing machine
it is available 24 hours daily
CREDIT BUYING AND SELLING
In recent years, credit buying and selling has become very common especially in the sell of consumer durable goods
such as motor car, computers, stereos,cookers, refridgerators and television sets, as these type of goods may require
more money for the consumer to procure them
Reasons why businesses purchses on credit
do not have the capital to pay immediately
it a common practice and businesses are encouraged to do so
may sell the goods bought before payment is due and use the money to pay for the debt
it is a short term form of financing the business
to overcome cash flow problems/liquidity problems
There are two major forms of buying and selling on credit. Namely;
(a)
Credit Sales Agreement or Deferred Payment
Is the buying of non durable goods such as clothes and food on credit by which the customer becomes the legal
owner of the product immediately the first instalment is made
Main Features of Credit sale Agreement

the buyer takes possession and ownership of the goods of the product immediately the first instalment is
paid

repayment of the product is made in regular instalments

the goods can not be repossessed if the buyer defaults in payment

however, s/he can be sued for the remaining balance

is suitable for buying non-durable goods whose value depeciates quickly

where the credit sale agreement is signed away from the trader’s premises, the buyer may cancel the
agreement within the cooling off period.

A cooling off period is a period of five days from the date of signing the credit sale agreement in which
the agreement may be cancelled, goods returned and customer’s deposit refunded, thus returning the
parties to their original positions
Advantages of Deferred payment to the retailer

Enables business sales to increase

May avoid wastage of perishables and the risk of goods going out of fashion

Has closer personal contact with the customers for possible future deals
Advantages of deferred payment to the consumer

Takes possession and ownership of the goods immediately the first payment is made

The retailer can not repossess the goods if the buyer defaults in payment

Enjoys the use of the goods while still paying for them
Disadvantages of deferred payment ot the retailer
15
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 16 of 89





May suffer bad debts
Goods may not be repossessed
Where court proceedings are initiated, they may take too long and are too costly
He loses the right of ownership to the goods immediately the buyer makes the first payment
May require extra capital to finance goods taken on credit
Disadvantages of deferred payment to the customer

May be forced live beyond his means by getting a lot of goods on credit

Thus burdening himself/herself with instalment payments

Prices may be higher than the cash price
(b)
Hire Purchase
This is the buying of durable goods such as vehicles, furniture and machinery by initially paying a deposit
followed by equal monthly instalments over a given period of time
The main Features of Hire Purchase
Initially a deposit is paid followed by equal monthly instalments paid over a period of time until the total
price is paid which includes interest
Interest is usually expressed as a percentage of the market price of the item
The item bought bought may not be sold until the payment is completed
This is because, the buyer only becomes the legal owner of the goods after paying the last intalment,
hence the item purchased can not be sold until the last instalment is paid
The buyer has the use of the goods whilst paying for them
It usually deals with durable goods such as machinery, vehicles, stereos, refridgerators, buildings and
furniture.
In the event of the buyer failing to pay the instalments, the goods may be repossessed,
however, it is subjected to certain legal limitations,
for example, if 1/3 of the purchase price has been paid, then court order is required
There is usually a maximum value of transactions
-
Advantages of Hire Purchase to the Buyer
it enables the buyer to acquire the goods which s/he can not afford on cash basis
the buyer has the use of the goods whilst paying for it
some goods may pay for themselves such as tractors /vehicles, stereos, machinery, cookers and
refridgerators
the buyer may obtain the goods on current price to beat inflation
by spreading payments over a period of time, he can save money for other needs
it may improve the standard of living of the buyer
it is an indirect way of saving though not in form of cash but property
-
Disaadvantages of Hire Purchase to the Buyer
may take on the great burden by forcing him to live beyond his means
in case the buyer defaults in payment the goods may be repossessed and the buyer will lose both the money
paid and the article
goods are expensive as interest is added to the cash price
the buyer only becomes the legal owner of the item after paying last instalment
hence he can not sell the article until the last instalment is paid
he may be tempted to go into many Hire Purchase agreement
he may buy good he does not need





Advantages of Hire Purchase to the Retailer
it increases the sale of durable expensive goods hence the retailer has high turnover
the seller may get high profit margin since interest is charged
he may get commission if it is financed by the finance company
has closer personal contact with the customers for future deals
retails the right of ownership to the goods until the las instalment is paid
-
Disaadvantages of Hire Purchase to the Retailer
o Goods repossessed may not be worth reselling
o May suffer bad debts
o It involves a lot of paper work
o The retailer may be forced to employ several shop workers to collect the instalments
16
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 17 of 89
o
o
o
o
The process of repossessing the goods from the defaulting customers may take long
and my be too costly
Much of the traders capital is tied up in debts hence it requires high capitalinvestiment
Court action against defaulting customers is very unpopular and may turnish the image of the trader
which may scale away customers
The differences between Hire Purchase and Deferred Payment under Credit Sales
o In Hire Purchase, the buyer becomes the legal owner of the item after paying the last intalment while
in deferred the buyer becomes the legal owner of the item immediately the deposit is paid
o Hire purchase deals with durable goods while credit sales deals with non durable
o Under Hire Purchase, the goods may be repossessed in case the buyer defaults in payment while in
deferred payment the goods may not be repossed but the buyer will only sued for the remaining
balance
o Hire Purchase may be financed by the finance company while credit sales may not be financed by the
finance company
o Under Hire Purchase, the buyer can not sell the goods until all the payments are completed but under
deferred payment thre buyer can sell the good any time as she becomes the legal owner of the goods
as soon as the deposit is paid.
The necessity of Hire Purchase to be controlled by legislation
o the purchaser may not fully understand the contract worded in legal terms
o the charges may not be clearly be stated and they may be too high, therefore, the Annual Percentage
Rate or true rate of interest must be stated with the Hire Purchase price and cash price
o repossession of the goods amy occur on trivial grounds if protection is not given, that is if 1/3 of the
purchase price has been paid the court order is required
o some salemen are too persuasive
o cooling off period (contract made outside business premises can be cancelled) allowed under some
circumstances
The Role of the finance Company in Hire Purchase
o The arrange Hire purchase and leasing terms
o the finance company provides finance by paying the supplier of the goods the cash price for the item
and the buyer becomes indebted to the finance company who collects the instalments
o the raise money for Hire Purchase by allowing high rate of interest and deposit allowing the seller
commission on introduction
o the seller is essentially acting as an agent between the finance company and the buyer
o the finance company makes it profit by charging interest on the amount lent
why the consumers need protection when buying goods and services
o different consumers might be charged different prices (fluctuating prices)
o the consumers might not receive the right content of the goods (under weight goods)
o advertisers might make false claims (misleading advertisements)
o some salesmen are too persuasive to induce to the consumers to buy the goods
o some manufacturers might try to cut the production cost by using inferior or dangerous ingrediates in
the products
o some traders may over charge the consumers by fixing prices at high levels
WHOLESALE TRADE
Intoduction
The word ‘whole’ simply means bulk and to sale is simply to transact, trade is the buying and selling of goods and service with a view of
making profit. Wholesale trade ican therefore be defined as the buying and selling of the goods in bulk(large quantities). A person who
sells the goods in large quantities is known as a wholesaler. A wholesaler is a connecting link between the manufacturer and the retailer,
and being a middleman functions
Describe the functions of a wholesaler
Buys goods in bulk from the manufacturer hence clearing the manufacturers’ production line
Warehouses the goods awaiting demand to ensure steady flow of goods, hence preventing price fluctuation(evens
out prices) and allowing the manufacturer to produce the goods ahead of demand
Breaks bulk and sells goods in smaller quantities to retailer
Finances the retailer by providing credit and manufacturer by paying promptly
Acts as an intermediary between manufacturer and retailer by passing information/complaints to manufacturers
Provides a variety and wide range of goods for the retailer and consumer which is gleened from different producers
17
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 18 of 89
-
Prepares goods for sale by branding and blending them.
Provides transport (delivery) for goods from manufacturer and to the retailers premises
Operating cash and carry warehouse.
he is a risk bearer, that is by storing the goods on behalf of the producer or rtailer, the goods may go out of fashion
or they may be gutted by fire or stolen whilst in the warehouse.
Services of wholesaler to manufacturer
Buys goods in large quantities/bulk from manufacturer in this way the manufcturer is able to clear his production
lines and have less truck on his premises.
Finances the manufacturer by paying promptly/paying within the credit period and this affords manufacturer to
have constant supply of goods.
Provides information to manufacturer and this enables manufacturer to assess the present and future of state of
market.
He acts as a middleman between the manufacturer and the retailer
Warehouses seasoned goods on behalf of manufactures and therefore prevents a shortage and price changes.
Prepares goods for sale (branding, prepackaging and blending)
Partly finished goods and becomes responsible of the wholesaler for finished process.
Services of a wholesaler to the retailer
Sells in relatively smaller quantities to the retailer (breaking bulk)
Delivers the goods to the retailer’s premises free of charge/offers transport
Provides retailer with market information, which is passed on to the consumer, so that they are able to know what
new goods are coming on the market.
Finances the retailer by providing credit
Provides the retailer with a variety of goods from various manufactuers.
He acts as a reservoir
He operates a cash and carry warehouse
He acts as an intermediary between the retailers and the manufacturer
Offers trade discount
Allows the retailers to have a steady flow of goods at stabilised prices throughout the year
Services of a wholesaler to the consumer
he ensures a stead flow of goods
he stabilises the prices throughout the year
he provides the consumers with a variety of goods
he provides the customers with information from the wholesaler , such as consumer’s complaints and suggestions
offers special promotions that are passed on to the consumer
he gives credit facilities to the retailer which results in an increase of retail shops being opened near consumer’s
home
How do the functions of a wholesaler affect the consumer
May add to cost of goods
Offer cash and carry service to customers
Providers variety to retailer passed on to customer
Offer special promotion passed on to consumer
Offers cash and carry services to some retailer cheaper prices to consumers
Introduces retailer to new products passed to customer.
Why is a wholesaler reluctant to undertake retailing
Could be in competition with his own customers
Can not afford to run both kinds of business
Would need to live moe staff
Would spread resources too thinly and so might not be effective in either.
Would need to have two different kinds of Premises in very diffderent location
Reasons for the Decline of the wholesaler
Growth of large scale retailing outlets who are able to undertake their own wholesale
Whole saling functions being undertaken by manufacturer or retailer-saving intermediary cost.
Some retailers buying directly from manufacturers-reduced costs
Increase in sale of branded and prepackaged goods-can be supplied directly from manufacturer.
Demand for speed delivery perishables.
Increased trade in particular kinds of goods-fragile.
18
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 19 of 89
-
the intoduction of mail order
some large scale retailers are able to manufacture their own goods, hence eliminating bo the wholesaler and the
producer
need to cut on the intermediary costs
increase in trade of perishable goods such as bread and bouquets
increase in trade of technical goods that may require installation by the manufacturer such as Digital Satelite
Television package(satelite dish) and computers
demand for speed delivery of the goods such as Newspapers
increase in trade of goods with low turnover such as furniture
SURVIVAL OF THE WHOLESALER[strategies taken by the wholesaler for the continued existence]
Despite the above factors working against the wholesaler, he has taken the following steps to remain competitive:formation of voluntary chains
small retailers register as members and are supplied with the goods by the wholesaler
and are conviniently situated where the retilers have established their shops
small scale retailers do not have enough capital
therefore they still depend on the wholesaler to supply them with the goods, to offer them credit facility and
delivery service.
they operate co-operative wholesale society
operates a cash and carry warehouse as well as retail in the same premises
does not offer transport
does not sell on credit
TYPES OF WHOLESALERS
CASH AND CARRY WHOLESALER
The cash and carry wholesaler is normally located on the outskirts of town and probably on the
industrial area of business site.
Reasons for the location
no need for prime retail site for display
retailers will have own transport to travel and collect their goods
site less costly and prices or costs must be kept as low as possible
large space required for car park or delivery bays
-
Characteristics of a Cash and Carry warehouse (wholesale)
membership may be required
customers are normally retailers and consumers
stocks a variety of goods
they strictly sell on cash basis/no credit facility offered, that is, retailers must pay by cheque/cash prior to
taking goods
may give special offers, gifts, discounts and loss leaders
they do bot provide transport or delivery service, that is, the retailers must transport their own goods, this
enables the wholesaler to cut costs/prices so that smaller retailers compete with larger organizations.
they operate from the warehouse/large buildings
goods are displayed on shelves in boxes.
they operate on self service
customers use trolleys whilst shopping
They mainly deal in groceries and other goods that do no require perssonal service
They open for longer hours
GENERAL
They deal in a wide range of goods and they usually have branches in many parts of the country
Characteristics of a general wholesaler
they are usually run by limited companies
they operate either on regional or national level
they give credit facilities to the retailers
they may employ agents to collect orders from the retailers
they carry out the functions of a wholesaler
they provide delivery service to the retailers
retailers are mostly account holding customers
they offer all the functions of a wholesaler
19
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 20 of 89
SPECIALIST WHOLESALERS
These are wholsalers who deal in a limited range of goods. They are usually a source of supply for many retailers and they sell both
home produced and imported goods
Co-operative Wholesale Society
This is the wholesale business formed by the co-operative retail societies
THE MAIN FEATURES OF CO-OPERATIVE WHOLESALE SOCIETY

membership is open to all co-operative retail society wishing to become members

they are controlled by Board of Director elected from representatives of the co-operative retail society

they break the bulk for the members

they supply members with the variety of goods

to reduce dependence on other wholesalers, they carry out manufacturing goods, farming and obtaining own
labels

capital is provided by co-operative retail society in direct proportion to the number of members they have

profits are shared as dividends amongst members according to the purchases made

they are located on the outskirts of town for the following reasons; land is cheap and readily available, the
members have to provide their own transport to move the goods.
MIDDLEMEN IN WHOLESALE TRADE
Factors









they are agents concerned with selling of goods/services in the home trade
they sell in their own names although not theirs
They sell on behalf of their principals/someone else or other people and they do not buy.
they have possession of the goods and documents of title
they may sell the goods to the customers on credit
They are remunerated by a commission
And when they guarantee payment by buyers,
they get an extra del Credere commission
in addition their normal commission for bearing risks such as bad debts.
Brokers





Are agents concerned with both buying and selling of goods/services
on behalf of the principal/someone else or other people
they do not have possession of the goods nor do they sell in their own name
they merely bring buyer and seller together or into contact.
They are remunerated by commission called brokerage
Merchants

are principals/traders who buy goods for themselves.

They import to sell at home.

They act as wholesalers and provide delivery, warehousing etc.

They are remuneration is profit

which is the difference between the buying price and the selling price
MARKETING BOARDS
It is an association of agricultural producers and is established by an act of parliament.
Functions of the Marketing Board

To ensure the efficient marketing of agricultural products
 to restrict undue fluctuations or variations in prices
 collection and storage of agricultural products
 to maintain a steady supply of goods on the market
 purchases total supply and releases quantities as appropriate
 fix prices of agricultural products
 advices farmers/producers
 supplies farm inputs and equipment to the farmers such as seeds and fertiliser
 offers loans to farmers
 carries out agricultural research
 gives producers a sure price/market
20
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 21 of 89

gives consumers a steady supply of the goods
Warehousing
This is the provision of ample accomodation and protection given to goods from the time they are produced until when
they are needed by consumers.
Some Goods not usually stored in a warehouse.
1.
Jewellery and pharmaceutical products are rarely stored, not only for security reasons but also because of the
high cost of investment in the stock.
2.
Some perishable goods such as bread and vegetables need to be consumed quickly and are, therefore, rarely
stored in a warehouse.

3.
They quickly go bad and must be used within a short time.
Some goods are so technical and bulky that they are made on order from consumer e.g. ships and aircraft.
The importance of the warehouse to those in trade
-
it provides a place for the storage of raw materials, equipment, partly finished goods and finished goods awaiting
sales, transportation and processing
it provides storage for the seasonal goods such as rain coats, jerseys, Christmas cards etc.
provides storage for goods in transit (entrepot) trade/stores goods in entrepot trade
it allows production to take place ahead of demand
ensures continuous production of goods
it evens out prices/stabilises prices/avoids price fluctuations of goods and it helps to prevent shortages of goods
reduces pilferage/theft of goods
it protects goods from adverse/bad weather elements/conditions
it provides room for the goods to be prepared for sale such as branding, blending packaging and labelling
it allows some goods such wine, tobacco, and cheese to mature
it provides space for the retailers to inspect the goods before buying them
it may be a cold storage or a wholesaler cash and carry
imported goods may be stored in the bonded warehouse
thus saving the working capital
it may be a bonded warehouse which provides storage for dutiable goods awaiting duty to be paid or imported goods
awaiting re-export
may be at the airports/ports/bus terminals
Reasons why warehousing is important to the cash and carry wholesaler
-
need to store the goods for customers/small retailer
offers large variety of goods from manufacturers
breaks the bulks, prices the goods, displays the goods
enables retailers to chose their own goods using trolleys and pay for them at the checkouts
Reasons why warehousing facility is essential to an importer of dutiable goods such as wine
need to store goods on which duty has not yet been paid
enables wine and spirits to mature
reduces theft/pilferage of goods
useful in entrepot trade or when bottling/blending has to take place or when seeking a buyer who
will then pay the duty hence economising on the traders’ working capital
Importance of a Bonded Warehouse to an importer of Coffee

storage of coffee on which duty has not yet been paid

allows space for preparing coffee for sale/blending, bottling or packaging

imported dutiable coffee can be store if the importer hasn’t got enough money

allows postponement of duty

hence economising/maximizing his working capital
21
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 22 of 89



Importance of a Bonded Warehousing to an Exporter of locally produced Computer Software
to protect the computer software from damage/theft/bad weather
storage of computer software pending export and awaiting transport
storage of the computer software needing further packaging
Types of Warehouses
1. The wholesale Warehouse
The wholesalers buy goods in bulk and keep them in their warehouses before selling them. Most wholesalers
operate large warehouses which give them the space not only to protect the goods but also to break the bulk,
prepare goods for sale and allow retailers to come and inspect the goods before they buy them.
2.
Cold Storage Warehouse
This is a form of specialist warehouse used mainly for the storage of perishables like fruits, fresh meat, fresh milk
butter cheese etc. Goods can be exported throughout the world without the fear that they would go bad on
transit.
3.
The Manufacturer’s Warehouse or Depots
They store raw materials, components, tools, spares and machinery necessary for production to take place. They
also store finished products before transporting or selling them. To the
manufacturer, Warehousing provides
a reservoir of raw materials that enables production to go on without interruption. It also enables them to keep a
stock of finished goods that will be able to meet the demand of their customers most of the time.
4.
Seaport and Airport Authority Warehouses
They facilitates the worldwide distribution of goods in international trade. This makes it possible for goods to be
stored while on transit, either at sea ports or airports may be because transport is not immediately available or
because they are awaiting customs clearance.
5
Bonded Warehouses

These are used for the storage of dutiable goods

on which duty has not yet been paid.

They are under the strict control of the customs and excise authorities.

Goods are only released from them when the duty is paid.

Goods may be sold whilst in the bonded warehouse

To raise more money to pay for the duty

If there is inadequate working capital

Therefore maximising working capital

The goods may be blended or prepackaged but not manufactured
Importance of the Bonded Warehouse

They are very important as they facilitate international trade and also enable the customs authorities to
enforce the payment of duties.

they allow the preparation of the goods for sales such as bottling, blending, grading, branding, etc

they enable goods to be offered for sale whilst in the bonded warehouse

they enable the exporter to postpone payment of customs duty

and thus economising on the working capital

they allow the importer to transfer payment of customs duty to the new buyer

they allow the exporter to avoid payment of customs duty on goods for re-export

they encourage entrepot trade because of the avoidance of duty
22
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 23 of 89
DOCUMENTS USED IN HOME TRADE
THE NEED FOR DOCUMENTATION IN BUSINESS TRANSACTIONS
In business there is need to provide a written record of all the transactions that take place not only for the sake of
evidence but also to enable the parties involved to keep track of their activities. For this matter a number of documents
have evolved and are in use on a daily basis. Documents are important in business for the following reasons:

they provide a record of goods bought and sold by the business, such as purchases as sales invoice

they enable business activities to be controlled by providing a record of income and expenditure such as the
receipt and cheque

they make it possible for information to be passed on to other traders, such as the catalogue or quotation

enables business debts to be collected by providing a record of debtors, such as the statement of accounts
shows the amount the buyer owes the seller

confirms the delivery of goods, such as the delivery note and the consignment note.
How the buyer may obtain the information s/he requires before placing an order
send for a catalogue and price list/trade journal
send an inquiry to the seller and receive from him/her a quotation or catalogue or price list
telephone the supplier and quotation him for any information
by attending a trade exhibition/trade fair organised by the seller
by asking the seller for demostrations for his/her goods
by asking the seller for visits by his/her sales representative
DOCUMENTS USED IN HOME TRADE
AN INQUIRY
This is a letter prepared by the buyer and is sent to the supplier
asking for the availability of goods, their sizes, prices, delivery dates and terms of sales.
It is possible to make a verbal inquiry on the telephone, and ask for a quotation although verbal inquiries may not be
taken seriously.
23
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 24 of 89
ENQUIRY
The Salvation Army
Zambia Territory
Chikankata High School
PRIVATE BAG S 1
MAZABUKA
DATE ………………
TO BUDGET STORES
Mazabuka Branch
Dear Sir/madam
Please quote your best terms for the supply of the following:
1
60 Lounge suit- red
2
20 Display albums- grey
3
20 Card index cabinet - white
4
60 Card index cabinet - grey
5
10 Fling cabinet - green
Yours faithfully
Mulenga Mwanakashi
Purchasing Manager
A tender
This is sent to the seller in response to an advertisement inviting quotations or estimates for the supply of certain
goods or services. An estimate is an order to carry out a service or to undertake work for someone at a certain price.
This price is only the expected cost of the work to be done and is not a definite price.
The terms of payment may include cash and trade discount.
Trade Discount
it is a reduction from from the list or catalogue price
it is usually shown or calculated on the invoice
it is allowed to those in trade(one trader to another) or customers who are buying to sell
again for a profit/usually refferred to as profit margin
usually varies with the quantity purchased and with the custom of that trader
it encourage bulk buying
may be varied to avoid the expenses of reprinting the catalogues
Cash Discount
it is a reduction from the invoice price
it is given to encourage prompty payment (early payment), eg. 5% within 14 days
it helps to avoid bad debts and improve/speeds up the cash flow system of the business
it enables the retailer to earn a good reputation with the supplier
The Differences between trade and Cash discount
Cash Discount
Trade Discount
It reduces bad debts
It saves the reprinting of catalogue
24
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 25 of 89
Aids cash flow of the business
Encourages repeat orders
Reduction from the invoice price
Reduction from the catalogue price
Encourages the buyer to pay promptly/quick payment
It encourages bulk buying
A Catalogue

This is usually in form ofa booklet/pamphlet with pictures of goods

containing description of the product,

the terms of payment and terms of sale

such as trade discount, cash on delivery and cash with order

The prices may be shown under the article.

They are usually issued once a year or at longer intervals

and are normally printed by the outside firm, which makes them more expensive.

They are usually used by the supplier as a means of advertising their goods.

They are more common in mail order firms.
A Price List

This is usually used with the catalogue.

Each item in the catalogue is numbered and the same number is shown in the price list, along the price for
the item.

A number of price list may be issued for use with only one catalogue because of the cost of reprinting
catalogues when prices change.

The buyer will usually obtain a list from several firms and compare prices, taking careful note of the
respective terms offered by each.

It shows the list of goods in stock with their prices

The description of the goods such as the colour, quantity and quality.
Ref No.
CO 12
D125
D127
D150
P250
PRICE LIST
BOOK WORLD,
P. O. BOX 300001,
LUSAKA.
Description
Carbon papers A4
Ball pens (assorted)
Pencils (assorted)
Erasers
Quality bond papers A4
Price
65 850 per box
45 000 per box
30 000 per box
20 000 per box
120 000 per box
THE QUOTATION

This is a reply to the inquiry.

It is usually sent by the supplier to the customer.

contains a detailed description of goods asked for/available such as colour and quality,

the price at which goods are offered,

terms and conditions of sales including terms of payment and delivery date.

The customer uses the quotation to compare prices and conditions offered by various suppliers before
placing the order.

It shows name and address of the seller

Shows the date when it was written
25
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 26 of 89
BUDGET STORES
MAZABUKA BRANCH
LIVINGSTONE ROAD
MAZABUKA
QUOTATION NO.. 384120
QUOTATION
TO. Chikankata High School
Private Bag S 1
Mazabuka
In reply to your enquiry dated ……………………
We have pleasure in quoting the following:
Code No.
45231
42351
43231
42352
45321
Quantity
60
20
20
60
10
Description
Lounge suit-red
Display Album-grey
Card Index-white
Card Index-grey
Filing Cabinet-green
Unit Price
K2 000 000
K4 000 000
K4 000 000
K2 000 000
K5 700 000
Prices valid for 21 days
Delivery within 4 weeks of receipt of order
Cash discount 5% if paid with 28days of invoicing
All the prices are subject to 10%Trade discount
Price
K120 000 000
K80 000 000
K80 000 000
K120 000 000
K57 000 000
Orders over K50 000 000 sent carriage paid
Signature.
THE ORDER
This is an instruction to the supplier to supply a particular good(s).
It can be made on a special order form or in an ordinary letter.
Orders may also be placed verbally on the phone, but verbal orders must be followed up by a written document to
avoid misquotation and the supply of wrong items.
The order contains:

The description of the goods required;

The quantity ordered;

Price, as given in the quotation or catalogue;

Delivery date and cost of carriage;

The terms of sale specifying whether there is credit or not and the discount offered. The importance of the
order is that it confirms the customer’s seriousness in purchasing the item.
BUDGET STORES
MAZABUKA BRANCH
LIVINGSTONE ROAD
MAZABUKA
Your Ref. 364120
Our Ref. 814 34
ORDER FORM
Order No. 461710
To. Chikankata High School
Private Bag S 1
Mazabuka
Date …………………..
26
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 27 of 89
Please supply and deliver:
Quantity
Description
60
Lounge suit –red
20
Card index-grey
20
Card index-white
20
Display album-white
10
Filing Cabinet - green
Price
K120 000 000
K 80 000 000
K 80 000 000
K 80 000 000
K 57 000 000
K417 000 000
ADVICE NOTE
The advice note is sent to advise the buyer that the goods ordered have been despatched.
It is usually sent ahead of the goods.
It specifies the method of transport used, date of despatch, quantity and description of the goods.
If the goods do not arrive within a reasonable period of time the buyer should advise the seller.
As the advice note usually shows what is on the invoice,
it provides an opportunity for the buyer to spot any mistakes, which can be corrected quickly or in advance, and to
prepare the necessary space for the goods when they arrive.
ADVICE NOTE
BUDGET STORES
LIVINGSTONE ROAD
MAZABUKA BRANCH
MAZABUKA
Delivered to: ………………………………
………………………………
………………………………..
…………………………………
Date Despatched: ……………………………..
Order No. …………………………………….
Dated: ………………….
Number of Packages
Received in good order and condition :
Customer’s signature:
Description
A DELIVERY NOTE
It usually contains the same information as the advice note .
it is sent with the goods in order to assist the buyer to check the goods on arrival.
It is used only when the seller is using his or her own transport to deliver the goods to the buyer’s premises
A duplicate copy is signed by the buyer acknowledging receipt of the goods.
The delivery note is usually the same as the invoice, except that the prices are Omitted
The purpose of the delivery note is:

To provide the buyer with details of goods being delivered such as quantity of the goods and the description
of the goods

To help the buyer check the goods on their arrival

To enable the driver deliver the right type and amount of goods

To allow the seller obtain receipt of deliver
A CONSIGNEMENT NOTE
This is a document used when the seller sending goods to the buyer by hired transport.
It is a request and instruction to the carrier to accept and deliver a certain consignment to the consignee.
It is made out in triplicate.
The carrier’s driver will sign one copy and give it to the sender who will keep it as his/her receipt.
It contains the address and name of the consignee;
a description of the goods;
the quantity of goods or number of packages;
and a statement of who is responsible for any possible damage to the goods and freight charges.
27
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 28 of 89
The consignment note is sent together with the goods and the consignee signs it to acknowledge receipt of them when
the goods arrive.
The carrier will then produce this copy when claiming the freight charges (if it is not pre-paid).
.An invoice
This is a bill sent by the supplier to his customer containing details of the goods supplied relevant to the order made,
such as description of goods sent, quantity supplied, price charged, terms of sale, trade discount and value added tax
if any.
It is important because :

It shows the quantity of the goods supplied, the unit and total price

It tells the buyer the amount he/she owes the supplier and,

Shows the details and description of the goods,

Discount given(trade discount) and Value Added Tax(VAT)

It shows name and address of the buyer and seller

It is used by the supplier to start the accounting process

It is the request for payment for the goods supplied by the seller

It is form the basis of a contract of purchas or sale of the goods between the buyer and the seller

It gives details of goods supplied to the buyer

The buyer may also verify if everything ordered has been sent by checking the invoice against the order (if
there is no delivery note).
INVOICE
BUDGET STORES
MAZBUKA BRANCH
MAZABUKA
Date 5th November 2009
INVOICE NO..: 1642
YOUR ORDER NUMBER: 2542
TO : Chikankata High School
Private Bag S 1
Mazabuka
QUANTITY
50
50
50
TOTAL
DESCRIPTION/DETAILS
White collarless shirt
Navy blue neck ties
Royal blue trousers
Less 20% trade discount
Terms: 2% one month, 1% two months and net three months
UNIT PRICE(K)
45 000
9 000
100 000
TOTAL AMOUNT(K)
2 250 000
450 000
5 000 000
7 700 000
1 540 000
6 160 000
E&OE
Explanation of the terms:

2% one month means that 2% cash discount will be allowed if payment is made within one month

1% two months means that 1% cash discount will be allowed if payment is made within two months

Net means that no cash discount will be allowed/full amount owing to be paid

E&OE means Errors and omissions Excepted
NOTE: The address of the sender of the document is always on top of the document.
A PROFORMA INVOICE
is a special type of invoice sent before the goods are delivered if there is any doubt about the credit standing of a new
customer, or if the goods are being sent on approval. It shows same information as the invoice.
A CREDIT NOTE

This is usually printed and typed in red so that it will not be confused with an invoice or a debit note.

It is issued when the seller owes the buyer some money

and totals are usually subtracted from the invoice before it is paid./reduces the amount indicated on the
invoice
28
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 29 of 89









Informs the buyer that his/her account has been credited
A credit note is sent by the seller to correct an overcharge,
or to allow for the return of faulty goods
or empty crates and containers which the buyer has paid for.
It is also issued for surplus quantities of goods returned to the supplier
Shows the unit price, total price of the goods returned, trade discount and reasons for the return such as for
wrong goods supplied.
Shows name and address of the buyer and the seller
The credit note is important because it corrects the mistake that appears on the invoice.
It is usually printed in red ink to show that money is going out from the business
CREDIT NOTE
NO. ……………………..
Date…………………….…..
………………………………..
…………………………………
………………………………..
………………………………..
To: ………………………………….
………………………………………….
…………………………………………..
…………………………………………..
QTY
DESCRIPTION
PRICE
AMOUNT
DEBIT NOTE
This is a document sent to the buyer by the seller if he/she has been undercharged.
It is issued to claim the extra money outstanding.
In other words the debit note asks the buyer to pay the difference or amount by which he/she has been undercharged.
It may be issued if, for example:

Some delivered items are committed on the invoice

Pricing errors are made on the invoice

To increase the amount indicated on the invoice when then buyer was oversupplied but under charged

To notify the buyer that his account has be further debited

Increases the amount indicated on the invoice/it is a supplementary invoice
The importance of the debit note is that it informs the buyer of the undercharge and claims the extra amount
outstanding.
The seller has a right and obligation to issue both the credit and debit notes if the letters “E&OE” are printed on the
invoice. This means Errors and Omissions Excepted”, so if any mistake is made on the invoice the seller can issue
the note to make the necessary correction.
Debit Note
BUDGET STORES
LIVINGSTONE ROAD
PLOT NO. 87
MAZABUKA BRANCH
MAZABUKA
Date ……………………
TO: Chikankata High School
Private Bag S-1
Mazabuka
29
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 30 of 89
Invoice No. 263867
Quantity Returned
Description
Dated …………………………..
Model No. Price per
Total cost
unit
VAT
Rate
(%)
VAT Amount
THE STATEMENT OF ACCOUNT
This is a summary of all transactions made between the buyer and seller during the month. It is sent by the supplier
to the buyer every month. The main pieces of information contained in the statement of account are:

The balance owing at the beginning of the month, if any;

Amount of invoices issued during the month;

Payments made during the month;

Credit/debit notes issued during the month and net amount owing at the end of the month;
This document is important because;

It confirms the transactions made during the month;

It reminds the customer that payment is due;

It enables the buyer to compare the accounting records kept by the supplier with his/her own records.
NOTE: entries made in the debit column increases the balance figure and entried made in credit column reduces
the balance figure
The last figure in the balance column shows the amount of money the buyer owes the seller at the end of the
month
STATEMENT
SUPREME FURNISHERS
PLOT NO. 87
MAZABUKA BRANCH
TO: Chikankata High School
Private bag S-1
Mazabuka
Date …………………………
Terms:
Date
DETAILS
Debit (K)
Credit (K)
Balance (K)
E&OE
.
A Cheque is sent by the buyer to the seller as one of the method payment for goods. Since the date on the cheque is
the day on which the purchaser paid the supplier, the cheque acts as a record of date of payment. Payment for the
goods could also be made by standing order, credit transfer or direct debit. The cheque contains the following
information:

The date on which the cheque is drawn

The name of the payee

The bank on which the cheque is drawn/name of the drawee

The drawer’s name and signature

Amount to be paid both in words and figures
30
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 31 of 89

Drawee
Payee
Date on which
the cheque is drawn
BARCLAYS BANK (Z) LTD
(Registered Commercial Bank)
Date 31st May 2021
Mazabuka Branch
Pay
Simwanza Enock
The sum of
or order
five Million Kwacha only
K5 000 000
Signature Crankshaft Banda
Amount in words
Amount in figures
Signature
of
the
Drawer
A receipt
This is rarely used today since the cheque act of 1957, the cheque itself when it has been paid in the seller’s account,
and returned to the drawer, acts as a receipt. If payment is made through the credit transfer system, the statement
and the attached credit transfer slip are stamped by the bank cashier which act as a receipt.
31
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 32 of 89
TRANSPORT
Definition: It is an aid to trade that is concerned with the movement of goods and people from one place to
another.
Importance of efficient means of transport
Efficiency means of transport is important to a company or factory such as Zambia – China Mulungushi
Textiles which may a have branch within and outside the country due to the following reasons:-
It creates utility by bringing goods within the consumers’ reach
Provides consumers with a much wide variety of goods
Enables consumers to enjoy a high standard of living
It levels out supply by transferring goods from where they are produced to where they are needed,
therefore helps to prevent scarcity
Provides more opportunity for specialisation
This leads to cheaper goods to consumers
It clears the line of production for manufacturers
It is used for the delivery of raw materials to the factory.
It is used to ferry partly finished and finished goods to the warehouses and customers.
Used to move equipment or space parts to the factory, offices and between sites.
Allows the executive/management to travel between offices and factories.
Allows sales represents/agents to move efficiently both within the country and overseas to meet
their customers.
It enables goods to reach the customer at the right time, right place, right condition in order to
satisfy human wants.
It may bring revenue to the company if it operates its own fleet of vehicles.
It encourages tourism throughout the world.
It provides employment to those who work in various transport forms.
It helps countries to develop their economics by opening up wider market for the products.
The above would usually include sea and air transport for overseas transactions or road and rail
transport for transactions within the country.
Air transport is particularly important to a form for urgently needed goods or travel worldwide.
Road transport is important for the carriage of goods and people door to door.
Factors influencing the choice of transport
The following are the factors that may influence the choice of transport.
Cost of transport; for example sea transport being cheaper than air transport.
Speed of transport or urgency required such as perishable goods and pharmaceutical goods need
to be delivered quickly of the fast means of transport.
Size or bulk and weight of the consignment for example oil by pipeline or tankers not by air.
32
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 33 of 89
-
Value of the goods; for example, coal can’t bear the cost of road transport but rail.
the nature of goods; for instance, products like oil require special finilities.
Accessibility of transport to the terminals
The reputation and reliability of the transport/carrier of the goods.
Security or safety involved e.g. air trasnport
The distance involved.
Type of transport
Flexibility of the transport
ENVIROMENTAL PROBLEMS ASSOCIATED WITH TRANSPORT
Pollution (air, water, land and noise)
Ecological changes caused by the construction of the infrastructure, such as roads, dams, ports,
pipeline and rail
The Possible Solutions
government policy
civic education
FORMS OF TRANSPORT
Own fleet
Many large companies find it more convenient to buy, and operate own fleet of trucks for delivery goods and
collecting raw materials
Advantages of own fleet:
It can be cheaper if the company produces enough goods to keep the trucks busy.
It gives direct contact between customers and supplier. This means problems can be identified and
solved more quickly before they become too serious/big.
Better care can be taken to the goods as the business will be handling its own goods
Deliveries can be arranged more flexible with respect to time and routes.
The Company’s vehicle can be painted with advertisements on the sides so the fleet provides free
advertisement for the business whenever the vehicle goes.
The use of own fleet means that fewer documentation will be required.
Raw materials and equipment can be collected on and when they are needed.
Own fleet is more convenient as goods can be delivered when necessary.
Disadvantages of own fleet:
It is expensive to operate one’s own fleet of vehicles, as vehicles have to be bought, licence used,
maintenance fuel and insurance.
Drivers, have to be paid regularly and transport managers have to be paid.
Long distance deliveries to over seas customers for example, may not be possible on own fleet. This
simply means that sea, air or possibly rail has to be hired even if the company has its own fleet.
It may not be economical to have its own fleet if the output is too small.
The other problem of road transport like traffic congestions, limit the carrying capacity and the fact
that trucks have to return empty from trip, remains a problem.
Road transport
Road transport is by for the most important form of transport on most countries. It has drastically increased
due to the following reasons,
Advantages of road transport
It carries goods direct to their destination without any transhipment.
Door to door delivery is possible by road.
It is convenient and fast over short distances
It is more flexible as far as time concerned, that is no timetables and schedule may be followed.
May be economical due to less capital costs/transhipment cost.
Goods may better be protected or less pilferage/theft as the driver may keep an eye on them all the
time.
33
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 34 of 89
-
Roads reach almost everywhere
Goods may be delivered anytime
It is suitable for delivery perishables
It is suitable for small loads of consignment
It is suitable for most type of goods
It is possible to use own fleet of vehicles
Disadvantages of Road transport
It is slower over long distances than rail
It is no feasible to ferry large quantities or bulk goods as coal.
It is reliable to break down and delays due to poor weather conditions.
If the vehicle returns empty to the depot the cost of delivery the load will be most costly than
necessary.
The driver may have to stay overnight at a hotel for long distances. This may increase over all costs.
It is not suitable for carrying dangerous goods such as petroleum.
It causes more damages to the environment and ozone layer due to air pollution emitted
By the burning fuel and noise produced by some vehicle.
RAILWAY TRANSPORT
Railway transport is the most ideal form of delivery bulk Cargo such as coal, Iron ores, building materials,
petroleum etc.
Advantages of railway transport over road transport
Railway transport is faster over long distance than road transport.
It is cheaper especially when carrying bulk goods.
There is no congestion on the railway line (trains are free from congestion).
It is not so badly affected by adverse weather conditions
It is economical in the use of fuel
A railway line may have direct access to the seaport
Railway transport has relatively low running costs.
It is safer for carrying dangerous products such as fuel.
Special facilities have been developed in railway transport for carrying bulk deliveries dangerous
products such as fuel or oil, coal, cobalt, cement, iron ores etc.
Disadvantages of Railway transport
Timetables make railway transport less flexible than road transport.
The transhipment of goods, apart from causing inconvenience and damage of goods.
The expense of equipment and keeping the train in good condition is considerably high.
door to door delivery is not possible by rail
It is not suitable for urgent deliveries
It is generally slower than road transport over short distance.
It is not economical for small load, and short distances
Sea transport
This is by for the most important form of water transport for the carriage of goods. There are various
classifications of vessels used in sea transport and these are:1.
Passenger lines
These are mainly used for the carriage of passengers to various parts of the world.
They may curry some Cargo such as mails.
They follow strict timetables and schedules
They cannot wait for any delayed Cargo or passengers to arrive.
They follow fixed routes
They usually call at the main parts of the world.
Their main advantage of this form of transport is that transport can be planned ahead of time and
space.
The charges are usually fixed jointly by the shipping conference to which their owners belong.
34
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 35 of 89
2.
Cargo lines
These are ships used mainly for the delivery of goods although they may also carry few
passengers
They operate on fixed routes and adhere to regular timetable.
The ship will leave the port on time even if some of the scheduled cargo has not yet
arrived.
They too belong to the shopping conference and their charges are also fixed.
-
3.
-
– Tramp vessels (steamers)
These do not operate on regular routes or fixed timetables but sail whenever traders want their
cargo to be taken.
They do not carry passengers/carries goods only
They move from one part to another while awaiting demand for their services
They normally hired or chartered by whoever wants their services (his/her goods to be ferried)
Usually a charter part/agreement is signed between the ship owners and the trader who wants the
shop to carry his/her good.
Charges are usually based on space available, bulk of the consignment, weight and
distance
involved.
SPECIALED VESSELS AND GENERAL CARGO
Such ships are specialty designed for a specific purpose
(a)
Roll on and Roll off ships (Roros) or vessels
These are specially designed to allow vehicles to drive on and off with its cargo/passengers without
difficulties.
It speeds up door to door delivery to overseas destination eliminating delays on loading of goods
(serving time)
It also reduces possibilities of pilferage and damage to the goods in transit /on routes.
(b)
Container ships/vessels
 are specially designed vessels
 usually cellular in design
 to carry standardised containers
 which may be metal or wooden
 in order to save space on board when storing containers on board
 and maximise security of the goods.
 The problem of loading and unloading is eliminated (simplified)
 as cranes are able to load and unload quickly.
 Such vessels assist in turn-round time on ports
 and serving harbour dues or levies (reducing freight cost).
(c)
(d)
Tankers
These are bulk carriers specially designed to carry liquids
Such as oil and any bulk liquid.
They are specially designed to minimise safety, and loading and unloading liquids.
There size helps to cut off freight charged and harbour dues.
They are able to ferry large amount of oil demands worldwide.
Oil Bulk Ore (OBO) ships
They are large ships specially designed to carry one type of goods at a time.
They are also known as bulk carriers
Oil tankers are a good example of OBO ships.
REQUIREMENTS OF A GOOD SEA PORT
The control of seaports and their facilities is done by the Port Authority. The Port Authority assists traders
and other users of seaports by taking responsibility for efficiency of the seaport. The following are the
requirements of a good sea port/harbour:35
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 36 of 89
-
It should be sited as near as possible to a town or city, but not near high buildings and cause as litter
pollution as possible.
It should have speed and efficient roads and rail network to provide easy access and departure of
travellers and goods.
It should have good equipment and repair service necessary to keep aircraft flying such as
sophiscated radios, radars, computers and technical equipment.
It should have customs facilities to regulate the importation of goods and to check for prohibited
goods such as firearms and mandrax.
Should have migration offices to ensure that only people with valid documents do enter or leave
the country.
Should have buildings for hotel and accommodation, police stations, health centres, banks,
restaurants, post offices etc.
Must have safety procedures such as fire engines and ambulances.
Must have good warehousing facilities.
Functions of the Port Authority
They maintain the approach to the port by road, rail sea etc.
They provide warehousing facilities for the goods
they provide customs and immigration offices
the provide ship repair yards
they provide landing facilities such as lock gates, buoys and wharves.
they maintain port equipment and charge users
provides communication by radio and telephone
they provide markets, dock rooms, banking facilities, rest houses and restaurants for
passengers
provides offices for agents
provides security offices such as police offices
provides health and sanitation facilities
provides efficiency labour supply by hiring dock labourers, engineers, maintaining good
industrial relations and licensing lighter men
the provide refuelling and fresh water
they dredge the port to maintain the depth
they levy port labours and dock dues to pay for the above
they undertake all clerical work concerned with the above
Advantage of sea transport
It is relatively cheap particularly over long distances for the Carriage bulk goods which are not
urgently needed.
Large quantities/weight can be moved in one vessel, such as bulk consignment of grains.
The use of containers keeps costs to a minimum vessel, such as bulk consignment of grains.
The use of containers keeps costs to a minimum and increases the safety goods as it minimise
handling of goods in transit.
The seaport provides cheap transport linking all containers of the world as all countries have long
sea costs.
Tranships provide a very flexible service as they bound to any fixed routes.
Special vessels, such as oil tankers and reapers can be built for special cargo.
Disadvantages
It is relatively slow for urgently needed goods.
It has high insurance costs because of high risks jettisoning of goods.
There is high risk of pilferage and theft.
36
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 37 of 89
-
It does not offer door to door services as some countries/areas may not have seaports.
(Transhipment is inevitable).
Bad weather can cause delays and loss of goods.
Land locked countries like Zambia, Botswana, Lesotho, etc do not get the full benefit of sea
transport.
CONTAINERISATION
 This is the system of transporting or delivering goods by the use of containers.
 Containers are large metal boxes of standard sizes/specified sizes
 in which goods are picked at the manufactures premises/warehouse
 and are secured by the supervision of customs authorities
 and not opened until they reach their final destination.
 This form of transport is mostly used in road, rail and sea transport.
 The freight is based on the size of the container
 It reduces handling of the goods
 It reduces the risk of theft and damage to the goods
 It reduces insurance rates
Advantages of containerisation
Increased speed of delivery
as containers can be transferred quickly/past between different form of transport.
Goods are not taken out of the containers until they reach their final destination
which eases the problem of loading and saves time.
Eliminates the use of warehouses as the containers can be stocked outside.
Increases safety as there is less risk of pilferage thefts and damage.
There is a quick turn round for vehicle/ship,
which may reduce transport costs or handling costs.
T.I.R. (Transport International Routier) allows increased speed through customers.
Packing and insurance costs are reduced as containers improve safety of goods.
Disadvantages
not all vehicles and ships are standardized to carry containers.
This means the company might still need to hire standardized trucks.
Not all terminals (Ports) have mechanised container handling facilities.
This will require expensive upgrading of ports for them to be able to handle containers.
It requires large capital investment to establish container ports.
They are not economical for carrying small loads, as there would be wastage of space.
Many bulk goods such as timber, iron have limited capacity in air transport
as it has weight limits/restrictions.
AIR TRANSPORT
Air transport has seen a marked improvement in recent years and as a result, there has been a rapid growth
in the volume of cargo traffic and passengers using air transport. Some of these include:
The increased the importance of air freight due to more airports world wide, bigger air craft and
better airport facilities
The building of larger aircraft which are porter and move reliable.
An improved design such as fuse long and enquire has increased fuel economic.
Improved loading through large class at the nose and tail has cut loading capacity.
Increased in the number and improvement of handle facilities, provision of better storage and
handle facilities worldwide has seen remarkable change in air transport.
Advantages of air transport
The speed of our transport is particularly essential for urgent deliveries and emergencies.
37
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 38 of 89
-
Packaging and Insurance costs are minimal due to short transit period.
There is more security for goods as there is less chances of theft/pilferage.
There is less damage, to goods due to less handlings and travelling time.
It operates on direct routes
It is economical over long distances
Airports may even be found in jungles/deserts.
Disadvantages of air transport
It has higher operational cost.
Aircrafts have a limit carrying capacity, very sensitive to weight and size of Cargo.
It relies on other forms of transport.
It is not suitable for short list distances
It may also cause noise and pollution
If a phone crushes usually there is total loss of lives and Cargo.
There is a threat of hi-jacking aeroplanes
Modern Trends in Transport
The modern trends in transport includes the following
 The growth of containerisation of goods by road, rail, sea and air transport system
 Improvement in roads and motorways
 Improvement in modern handling facilities at airports, seaports and railway stations
 The growing in importance of high speed trains
 The growing in importance of air transport because of large aircrafts, large airports, more airports and
more air routes allowing more goods to be carried by air
 The development of roll on, roll off ferries
 Improvement in security measures for goods being transported
 The increased movement of goods because of the formation of trading blocks such as the Southern
and Central African Development Community (SADC), European Economic Community (EEC) etc.
 The decline in volume of goods carried by railways in many parts of the world
 The removal of customs barriers at entry points to the country has facilitated the use of
transcontinental vehicles.
 The general improvement in transport facilities have speeded up the movement of goods worldwide.
Pipeline
This is the system most used in the delivery of liquids such as crude oil/petroleum products.
Advantages of pipeline
o They are cheaper to maintain
o They carry large volumes of goods
o They save on labour
o There is no congestion or does not pollute the environment
o Can be used for alternative fluids/gases/liquids
o May offer direct delivery/door to door
o Goods are protected from contamination
Disadvantages of pipeline
o The initial cost of constructing a pipeline is too high
o It is not suitable for irregular cargo
o It is limited to transportation of fluids
o It has no return loads
38
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 39 of 89
o
o
o
o
o
Can easily be attacked by enemies in times of war/ open to sabotage
It requires many pumping stations if the gradient is high
There could be high losses in case of leakages
May be subject to theft/vandalism
Leakage may pollute the environment
Insurance
Insurance is an aid to trade, which under takes to cover risks, that may or may not (probabilities) in business
and if they happen, they will cause financial losses. It involves the insurer and the insured.
Insurer
This is the party (insurance Company) which under take/ giving the cover or Insurance
Insured:
This is the party (person) seeking for insurance or guarantee of compensation.
Definition:
Insurance is the legally binding guarantee given by the insurer to compensate/indemnify/restore or cover the
insured for any financial loss which may be suffered as a result of the occurancy of a specified event which
may or not occur(probabilities). In return for this guarantee the insured makes a periodic payment called
premium to the Insurer. The premiums are paid into a central fund (pool) for the claims of the unfortunate
few (ones). The profit on the Insurance Company is based on the statistical probability that only a small
percentage of the insured person will ever have to make claims. Therefore, the premium of many pays the
claims of the unfortunate few who have suffered financial loss as a result of an insurable risk leaving the excess
as a profit for the insurer for the services he provides. The larger the number of people contributing to an
Insurance pool for a particular risks the less likelihood of that group suffering a large percentage of less than
the average for all the people open to the risk. This is known as law of average. This is because there is less
chance of loss to the Insurance company. When the number insuring a particular risks with it, is large, the
amount or premium likely to be charged is lower.
Purpose/Functions of Insurance
To pool the risks of many insured persons and spread the financial losses of the unfortunate few
over the fortunate few over the fortunate many.
It reduces the risk of financial loss by giving indemnity i.e. giving security to the insured.
It reduces, fear by increasing funds, which might otherwise have to be set aside in case of a calamity.
It allows businessmen and businesswomen to enter into large-scale contract, which might otherwise
be avoided for fear of loss.
It is also on invisible export and means of saving for some people (in the case of an endowment
policy)
Why it is important for the business people to insure their items
39
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 40 of 89



If a loss occurs, the businessperson will receive compensation. Where the business person does not
insure, his/her goods and suffer a loss s/he will receive no compensation and he may end up going
out of business
It gives people the confidence to continue conducting businesses knowing well that should they suffer
a financial loss, the insurance company will compensate them
Claims against business people may be too large and without insurance, they may not be able to meet
huge claims arising from the members of public who may suffer losses. It is for this reason that
business people are required by law to take public liability insurance, for example, employer’s liability
insurance.
Pooling of Risks
 Pooling of risks is the basis of insurance which enables the fortunate ones to help the
unfortunate
ones.
 A policy holder pays a premium into the pool from which compensation is paid to those who claim.
 The funds in a pool must be sufficient to cover compensation, administration cases and leave some
profits for the insurance company.
 There is likely to be a separate pool for each risk.
 Some companies like Konkola Copper mine and Mopani Copper mine may run their own risk, that is
use self insurance.
 If there are many who wish to insure against a particular risk, more premium is contributed, but if
there are few calamities, the premium is low.
 For the principle of pooling of risks to work, the insured persons must not suffer losses all at the same
time. If they all suffer the loss at once, they can be no enough funds in the insurance pool to pay
everyone.
PRINCIPLES OF INSURANCE
There are the basic ‘rules’ of insurance which are applied to ensure that the policy is effective and it is not
prone (open) to abuse:
(i)
Utmost good faith
 Both the insured and insurer must reveal every relevant and material facts relating to the policy being
undertaken.
 The insured must fill in the proposal form by telling the truth without leaving out any material facts
relating to the contact.
 This enables insurance company to assess the risk and decide whether of not to accept it and then
determine the amount of premium
 The insurance company must also act in the utmost good faith by settling material facts relating to the
contract.
 The contract may be declared null and void if utmost good faith is not followed by both parties (breach
or utmost good faith) renders the contract well and avoid.







(ii)
Indemnify
This principal states that the policy holder must be restored/compensated to his or her former
financial position without making profits out of a loss. In either words he/she must be placed in the
same financial position as before.
She is not allowed to make profit out of a loss as she may cause the risk to occur.
Indemnity does not apply to life assurance and is limited to the sum insured or the market value of
the object, therefore the insured must not over insure or under insure.
Contribution applies if the policy holder insured with more than one insurance company.
In this case, insurance companies contribute proportional amounts to make up for the loss.
Subrogation applies if the insured is fully compensated/Indemnified for the loss E.g. in the case of a
vehicle stolen or damaged, the damaged (scrap vehicle) or recovered property belongs to the
insurance company.
The principle of average under indemnity means that if the insured does not increase the amount of
the cover when the value of the insured object. increases, he will not receive the full compensation
40
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 41 of 89
i.e
(iii)
in the event of the claim, instead he will receive part of the compensation based on the average cause
or the ratio of the amount to cover the market value of the object
. amount insured x Amount of compensation
Actual value of object
Insurable Interest
 It states that only the person who stands to lose financially if the risk insured against has the legal
right to insure the property or life
 That is, the person must own the property if s/he has to insure it.
 It prevents people who are not owners of the item from insuring the property
 If people were allowed to insure items or lives which do not belong to them, they might be tempted
to deliberately cause the loss in order to claim compensation
 And thus making profit out of the loss
 This will defeat the principle of indemnity because
 The insured was not in the position to lose financially hence s/he could not be indemnified
Proximate cause
This doctrine entails that the insurance company can only compensate a person who has suffered a loss if the
risk insured against is the immediate cause of the loss.
There is no compensation payable if the loss caused by the risk is not insured against
For instance, if Mr. Masimpe assures his life against death by motor accident and as he is travelling
from Mazabuka to very far place, he dies of a heart attack no compensation would be paid, this is
because, the immediate cause of his death is a risk which he did not insure his life against.
The application of this doctrine of proximate cause is further illustrated in fire insurance.
A fire insurance policy will not only cover losses caused directly by fire, but use of water or
demolition of part of the building to prevent the spread of fire to other parts or to neighbouring
building.
Taking out an Insurance Policy
The person seeking insurance cover approaches the insurance broker
S/he obtains and completes the proposal form which an an application for insurance
It gives details of the risk to be covered against and details of the applicant.
The proposal form must be filled in utmost good faith.
The proposal form is important to the insured because;
It enables the insurance company assess the risk and decide whether or not to accept the risks and
fix/set premium and finally issue the insurance policy, setting the terms of the contract (it forms
the basis of the contract).
*An insurance policy is a paper written as evidence between the insurance company and the
person insured.
Where the important information relating to the object being insured is not disclosed on the
proposal form, the contract may be declared null and void
Procedure involved in making a claim
 Inform the police immediately the loss occurs/happens
 Notify the insurance company of the loss as soon as it happens(possible)
 Notify the insurance company if the object was insured with the other insurance company
 Complete the claim form giving full details of the loss suffered
 Insurance company employees (assessors) inspects the damage
 They assess and determine the amount of financial loss suffered
41
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 42 of 89




In order to arrive at a fair and reasonable amount of compensation, the client signs an agreement of
loss form to bind him to accept the amount of compensation arrived at
The insurance company settles the claim by paying money
Or by paying in kind, eg, buying the same object of the same model
The remains of the object are subrogated to the insurance company
An Insurance Policy
 It is a document which sets out terms and conditions of an insurance
 Covering the precise risk
 Period of cover
 Exceptions such as life assurance like suicide
 And the amount of premium to be paid
The Insurance Broker
He acts as a link between the insurance company (underwriter) and the clients as the clients.
Can not approach the underwriters directly.
He gives information on the policy for a number of insurance companies.
They are not employed by the Insurance Company but they are independent professionals, who are
on insurance business on their own account.
They advice clients on the best insurance policy to the damage (scrapped vehicles) or recovered
property of the insurance company.
He may deal with the full amount of the policy recovered
He may deal with claims and particular problems affecting the client.
They collect premium from their clients on behalf of the insurance company.
They arrange insurance cover and administration (papers) work or clerical work for their clients.
Brokers are paid commission by the insurance company for their work.
Their commission is known as brokerage.
The Lloyds Insurance Corporation of London
This is international/ world market for Marine insurance and other risks such as aviation and life insurance.
o They have a high reputation to meet claims under writers offers insurance cover when approached
by brothers
o Lloyds of London corporation is not on insurance but rather an organisation which
provides
accommodation and other facilities for the member (underwriter and brokers who wish to provide or
negotiate insurance business.
o The Lloyds co-operation originated in the 18th Century from a coffee house.
Under writers
o These are principals who accept Insurance risks or cover a risk such as marine
o They receive insurance premiums from the clients
o If the risk occurs they pay out compensation from their own pockets
o They are rich people(they need enough resources) with a considerable financial stand, which enables
them to meet claims.
o They have unlimited liability
o They work/operates in syndicates (groups)
o They do not have contact with members of the public directly but through an insurance broker.
o They may be represented by an underwriter agent to “LEAD” who accepts insurance on his behalf.
o Their remunerations is profits
Branches of insurance
Because there are many risks facing individuals and businesses, many different insurance policies have been
designed to offer various insurance cover. These are:Life Assurance
 The term assurance refers to certainties,
42
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 43 of 89
 that is, risks that must certainly occur such as death.
 The term insurance refers to probabilities,
 that is, risks that may or may not happen such as fire, theft, accident and flood..
The principle of indemnity, does not apply to life assurance. This is because when a person dies, no amount
of monetary compensation will restore him/her to life. Assurance is looked at as a form of serving plan rather
than insurance. It is true and we all know that we are going to die but we are not sure when we will die.
Life assurance is a good way of ensuring that surviving members of the family are taken care of
Usually, if we live for a very long time and die long after retirement, it is possible that our savings may be
sufficient to meet the demands of our dependants. But if we die young we are likely to leave a widow and
young children with no money to look after them. This is where life assurance will be helpful.
Life policies are normally sold by insurance agents who are different from brokers.
Insurance agents usually act on behalf of a particular company. They never handle premiums. The
premiums are paid directly to the insurance company – Life assurance policy covers the following:
(a)
Whole life policy
This is a policy under which a person assures his/her life for a certain sum of money which will be paid to
his/her dependants after his/her death.
the person divides how much he wants to assure his life for and the insurance company
calculates the amount of premium to be paid monthly or yearly.
The assured pays premium for his/her entire working life until death.
To fix premium, the Insurance company will look at the age, health records occupation as well as
the duration and the amount of cover required – if the assured dies, the money is then paid to
his/her dependants and beneficiaries.
(b)
-
Term Policy
This is a policy which covers a person for a fixed period of time e.g. twenty years.
The premium is cheaper as the insurance company does not have to pay anything if the person lives
up to the period covered.
It may act as a form of saving for some people.
She/he can take the policy for the duration of the loan.
It is good for someone buying a house through mortgage.
If he/she dies before furnishing paying for the loan, the procedures are used to pay off the loan.
The main disadvantages of this policy is that no value at the end of its full period.
©
ENDONMENT POLICY
Under this policy the assured is covered for certain period of time.
The period may be from 5 years to 20 years.
It provides compensation in money (sum assured) either at maturity date or death of the assured
person whichever comes first.
Endowment policy serves two useful purposes f:
Endowment policy profit with profit assures the assured person to share profit made by the
insurance company from the premiums.
Fire Insurance
Fire is a risk that has caused untold misery to mankind.
The major Insurance cover available are
(a)
-
(b)



Ordinary fire insurance
Provides cover/insurance protection to a wide range of property such as personal and business
buildings, and there content against damage caused by fire.
Consequential Loss
this is the loss of profit suffered as result of an insured risk
for example; a trader may insure his/her retail shop against fire.
If later fire totally destroys the retail shop,
43
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 44 of 89



then the trader has not only lost the business buildings and contents
but also the profit she/he was making.
The loss of profit is a consequence of fire destroying business building and the contents.
Therefore, a consequential loss insurance provides compensation for:
 Loss of normal business profits as a result of an insured risk. e.g. fire
 Business expenses required to be paid when the business buildings are not in use.
 i.e. expense that may continue to be paid after the building are destroyed are salaries, interest
on loan etc.
 Renting or an alternative building.
Factors considered when fixing the premium for the insurance.
 The number of people wishing to insure
 So as to apply the law of big numbers
 Type of cover required
 Age of the person or the object
 Purpose for which the object is used for
 Value of the object
 Number of people using the object
 Security gadgets fitted to the object
 Make of the object
The size of the premium for pure insurance depends on the likely hold of fire breaking out and the following
are some of the factors considered are.




Materials used in the construction of the building i.e. whether materials are bricks or wood or
concrete and whether roofing is a thatch or iron sheets or asbestos.
Whether inflammable materials such as petrol, diesel, paraffin etc are stored in the house or not.
Nature of the surroundings of the house i.e. whether there is danger of fire breaking out from the
neighbouring houses or not.
Whether additional fire protection facilities are available or not e.g. fire brigade services provided
by local government.
Accidental Insurance
This branch of insurance covers a wide range of Insurance policies and includes the following:
(a)
Motor Vehicle Insurance
 It is compulsory by law far motor vehicle owners to Insure
 against loss or damage to third parties.
 In a contract of motor insurance, the two parties actually connected with the Contract of
Insurance are the insurer who is known as the first party
 and the insured person who is called the second party.
 The third party is any member of the general public
 to whom death or body injury may be caused
 e.g. passengers, pedestrians, other motorists etc.
A variety of motor Insurance policy exists. The main ones include the following:
(i)
Third party motor insurance
 Third party motor insurance is the minimum motor insurance
 any vehicle that moves on the road is required to have
 third party provides compensation only to third parties
 for death or body injury caused to them damage to their property.
 The insured’s own vehicle is not covered.
(ii)
Third party, fire and theft motor insurance
This type of insurance covers
44
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 45 of 89
Third parties for death or body injuries caused to them and their property.
The insured’s own vehicle
for accidental damage to the vehicle,
injury to the driver, loss of the vehicle by fire, theft or by instant mob justice.
-
(iii) Full comprehensive
Full comprehensive insurance covers a variety or risks that may happen to the vehicle. It is therefore the best
and at the same time the most expensive type of motor insurance.
Factors considered when fixing the premium for motor insurance
The size of the premium payable on motor insurance depends on many factors which include the following:
 Experience of the number of accidents the type of vehicle being insured has been involved in
based on statistics insurance companies have in their possession.
 The number of people wishing to insure against the risk or say, road traffic accident, so as to
apply the low of big number.
 The type of motor insurance required whether it is third party or comprehensive insurance etc
comprehensive insurance covers many risks and therefore higher are charged.
 The age of the driver young people are charged higher premiums because they drive fast, and
therefore more likely to cause accident.
 The purpose for which the vehicle is used e.g. higher premiums are charged on sport cars than on
family cars which are not used for car racing.
 The value of the vehicle – A new car stolen or damaged would require more money to repeal than
an old car. Therefore higher premiums are paid on new cars than old ones.
 The number of people using the vehicle premiums are lower when the motor insurance required
is meant to cover one driver. Higher premiums are charged where the vehicle is used by many
drivers.
 Occupation of the user. The size of premium for a teacher driver, for example may be less than
that of sales person when is always travelling across the country selling goods. A teacher is found
in class most of the day and is therefore less likely to cause accidents. Female drivers are usually
better drivers than male drivers and so less premiums for ladies than gentlemen.
(b)
Employer’s Liability Insurance
 This class of accident insurance provides compensation of employees for deaths, diseases etc
 . Suffered whilst at work
 or as a result of the employer’s negligence
 for example a shutter in Zambia Railways may lose both legs in an accident while on duty.

If employer’s liability insurance was taken by Zambia Railways, then the insurance company
would compensate the injured employee
 without employer’s liability, the employer might not be able to continue if a substantial claim
was made as all the money of the company can just be used to pay compensation to the
employee.
Public Liability
Public liability insurance covers business owners and manufacturers against claims by members of the public
for deaths, accidents etc. caused to them due to business owner’s negligence.
Examples
(i)
(ii)
A minibus owner may insure his/her minibus against the possibility of accident
happening to
members of the public whilst travelling on the bus.
A manufacturer may insure against claims for death or injuries resulting from the use his/her
product e.g. a meat pie manufacturer can insure against the possibility of poisoning to members
of the public after eating the meat pie.
The money that may be required in compensating injured members of the public might amount
to a billions of Kwacha. A business without a public liability insurance may not be able to continue
45
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 46 of 89
carrying out its business activities if large claims for deaths or injuries is made on it by members
of the public. It is important therefore that a business takes up a public liability insurance so that
claims made by members of the public for injury or deaths are not by insurance companies. This
would leave the operation of the business unaffected.
(d)
Fidelity guarantee Insurance policy
This class of insurance provides to employing for money or goods embezzled (stolen) by employees.
Company employees who handle large sums of money such as accountants take Fidelity Guarantee
insurance and pay premiums. The benefits of the insurance guarantee policy are however, paid to the
employee when an employee is convicted in a court of law of having had stolen goods or cash.
(e)
Credit Insurance
Credit insurance provides cover to traders for losses resulting from bad debts i.e. loss of money due to
non-payment by customers who obtained goods one sources on credit but later fail to pay for them.
(f)
Theft Insurance
This, class of insurance provides compensation to insured persons whose goods are stolen from homes
or businesses or goods in transit.
(g)
Air travel insurance
This class of insurance provides compensation to insured person who suffer deaths or
injuries caused by air accident.
4.
Marine Insurance
Marine Insurance Covers losses or damage to property and life caused by sea risks. The main types of
marine insurance are:
(a)
Hull Insurance
This class of marine insurance covers losses caused to the body of the ships, its machinery and fixtures.
The sea risks that may cause loss or damage to the ship or goods including bad weather, collision with
other ships, fire, sinking of a ship, bond storage in the ship, theft, etc.
(b)
Cargo Insurance
Cargo Insurance covers importers and Exporters for loss or damage to goods being
transported by sea transport to various parts of the world.
(c)
Ship Owners Liability Insurance
This class of insurance covers ship owners against claims that may be made against them.
(i)
Death or injuries caused to crew members and passengers.
(ii)
Loss or damage caused to other shop in a collision.
(iii)
Loss or damage caused to beaches etc.
(d)
Freight Insurance
Freight is the sum of money paid to the shop owners whose shop was hired for the
transportation of goods.
At certain times, freight is not paid in advance until the goods reach their final destination.
Freight insurance therefore, covers ship owners against the possibility of not being paid freight or hire
money by clients who do not pay transport charges in advance.
(e)
Sellers interest insurance
Where goods are sent to a buyer in a foreign country and the buyer refuses to accept delivery of these
goods possibly because he/she is bankrupt, the seller’s interest insurance would cover the goods while
arrangement are being made to sell them for the best price possible. Compensation is paid to the seller
if the goods are stolen or damaged in anyway before they are sold.
46
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 47 of 89
MARINE POLICIES
Types of marine policies include;
(a)
Voyage policy
This type of marine policy is taken out for a particular journey e.g. from Dar e slam to
New York: USA: Cargo insurance is usually taken on voyage policy rather than on a time policy.
(b)
Time policy
Time policy is marine insurance taken for a particular period of time to cover the hired ship,
for instance for a period of six months.
(c)
Mixed policy
Mixed policy requires that a sum of money agreed upon between the person seeking
insurance cover and the insurer is deposited with under risks so that each time a ship makes a journey
the premium is deducted from the amount deposited with underwriters. Floating policies are
appropriate where regular shipments of goods are made. They save time and troubles of taking out
separate insurance policies for each trip made.
MARINE LOSS
Marine costs may be classified as:
(a)
Particular average
Particular average refers to any form of cars or injury that may be suffered whilst the ship or
goods are in transit. The losses suffered may be complete or partial loss but it should be as
result of the risks insured against.
COMMUNICATIONS
Communication is an aid to trade concerned with informing people on goods and services available,
and enabling businesses and individuals to be in contact with other businesses and relations within
the country and abroad.
Importance of Communications
















provides business people with efficient means of contact within
the business organization
e.g. communication between the branches of an organization, or between departments etc.
informs the public on goods and services available on markets, where they can get them and at what price.
enables businesses to be conducted world wide. Today, the whole world is one huge market. No matter where
a person lives, the various
facilities available allow him or her to conduct businesses anywhere in the world.
widens the markets for the firm’s products in both home and overseas trade.
enables customers and suppliers in home and overseas trade to be contacted speedily
by telephones, fax, electronic mail, telex, internet, air mail etc. thereby allowing for quick:
Placement of orders for goods urgently required e.g. spare parts etc
Dealing with customers’ complaints, and for
Settlement of payment and queries that may arise in a business transaction.
enables businesses to compete with one another.
enables businesses to penetrate new markets or widening of markets.
allows businesses to be in contact with sales representatives in home and overseas markets.
enables businesses to be in contact with stock markets world wide for detailed information on existing share
prices.
is essential in organizing surveys or trade fairs to promote business activities.
47
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 48 of 89
Types of Communication services
The two main types of communication services are postal services and telecommunication services.
A.
Postal services
Postal services are services provided by post offices for posting and
following are just some of the postal services:
delivering of letters, parcels etc. The
1)
Business reply service
 is a postal service that enables licensed businesses use
 to receive replies or orders from potential clients
 using special envelopes or forms provided by the seller
 which do not require postage stamps to be affixed on them.
 The firms are issued with licences to use business reply service
 by the post office on payment of a deposit.
 Used by mail order firms
The reason why firms use a Business rely service is to encourage customers correspond with them since
there is no additional expense on postage of letters. Mail order companies usually use business reply services
to encourage customers to order goods from them.
Business reply service may be used to send first and second-class mail. First class mails are letters that are
required to be delivered the same day of posting. Second class mails include mails that do not require urgent
delivery.
2)
Poste restante
Poste restante is a postal service provided for visitors and travellers to town or city where they do not have a
permanent address. Letters, of a town from where the
letters are collected. For example, Miss Maambo
Phiri, a visitor with no permanent address to Livingstone city can have her letters addressed as follows
Stamp
Miss Maambo Phiri
Livingstone main post office
Poste restante
LIVINGSTONE.
In the above example, Miss Lubasi who is expecting to receive letters from friends, relatives etc. by
poste restante service would be checking for her poste restante letters at Livingstone Main post office.
3)
Data post
Data post is a postal service that provides a speedy, secure and highly reliable means of sending and delivering
urgent and important packages containing business documents and goods. It’s particularly useful for
exchange of computer materials such as tapes, diskettes etc. Data post offers overnight door-to-door delivery
of packages or parcels handed in at post offices counter displaying data
post sign. Packages are given
special security treatment. Data post is operated both locally and internally.
4)
Registered letters
This post service enables valuable items such as cash notes to be sent through the post office. An envelope
or package being used in sending items by registered letter must have a large blue cross on it. Compensation
in proportion to the value of packet and registration fee paid on posting is paid if the item gets lost in the post
office.
48
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 49 of 89
A certificate of posting is issued to the sender as proof of posting. Upon delivery
signature of the person receiving the item is obtained as proof of delivery.
of a registered article,
5)
Recorded delivery
Recorded delivery is a postal service used when proof of delivery is required. It is used
when
important documents such as examination certificates, plans, designs, legal documents etc.
sending
Recorded delivery letters travel together with ordinary mail but are separated at the delivery point where they
are recorded in a book and signature requested from the person receiving letters.
6)
Cash on delivery (COD)
A cash on delivery service requires the customer to pay the trade charge before the goods can be delivered to
him or her. Mail order companies that sell goods through the post office mainly use cash on delivery. The
post office acts as an
agent for the seller. For example, a mail order company in South Africa can send a
parcel by post to a customer in Livingstone, Zambia. On receipt, the Livingstone main post office will send
an advice note to the customer requesting him or her to collect the parcel. The customer will only be given a
parcel on
payment of trade charge specified by the sender of goods for collection on delivery.
All items sent on cash on delivery service are registered on posting.
7)
Express mail service
Express Mail service is fast and safe. It is used for sending important and urgent documents. It enables
quick sorting and delivery of mail in return for extra fee from post office customers.
Mail is personally accepted at post office and delivered to the destination. Parcels up to a certain size and
weight are delivered the same day of posting by special messengers. Individuals may use this service to
send special gifts to friends and relations e.g. birthday presents etc.
8)
Private bags
Private bags are used for posting and receiving letters. There are two keys to a bag. One is kept at the post
office another is kept by the owner of the bag. When letters are locked in the mail bag at the post office, they
can not be removed until the owner opens the bag at his or her own place of work. Therefore, private bags
provide more security to letters than post office boxes.
9)
Post Office Boxes
A post off ice box is used for receiving letters only. An individual or organization renting a post box collects
letters from the post office at any time.
10)
Franking Machine
Franking machine prints postal impressions on envelopes. The postal impressions show the amount of
postage, place and date of posting. Franking machines are used by organizations that send many letters at
once. They save time in affixing postage stamps on each letter.
A franking machine can be bought or hired from a company that sale manufactures franking machines.
However before the franking machine can be used, a license to use it must be obtained from the post office.
The post office sets meters for the franking machines. The hirer of franking machine pays the post office
according to units of postage value used.
11)
Philately
This postal services is concerned with issuing of postal stamps and historical items of the post office. Philately
produces such as postage stamps, neckties etc
depicting postal services are sold at the post office.
There are several more postal services provided by the post office.
The continuing need for postal services
49
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 50 of 89
Despite the abundant sophisticated telecommunication systems currently available in our communities, there
will be a continuing need for postal services. The reasons for continuing need for postal services include the
following:



Postal services are usually cheaper than telecommunication services, and therefore
there
will
always be people using the cheaper postal services for their communication in preference to expensive
telecommunication services.
Postal services are used in sending goods in parcels at distant places. It is not possible for one to send
a parcel of goods by telephone or by fax, or by telex. Therefore, there will be a continuing need for
postal services.
Postal services do not require special equipment to transmit or to receive messages. Thus postal
services are usually used to send messages to the remotest areas.
B.
Telecommunication services
Telecommunication services that are use by people engaged in commerce include telephones,
telegrams, telex, electronic mail, internet, fax, radio paging, radio
messages etc.
1)
Telephone
Telephone provides people engaged in commerce with speedy means of contacting other business people over
any distance either within the country or abroad. The circumstances in which a telephone may be used
include:









When a customer wishes to inform his or her supplier that he or she was sent with wrong or
incorrect quantity or type of goods.
When a trader needs to hold a discussion or conversation with a customer.
When a person wants to speak to a particular person
When a person wants an immediate response to a query etc.
When a person wishes to leave a message on answering machine.
When the supplier wishes to urgently inform his or her customer of a consignment of goods before it
arrives.
When a potential customer wishes to discover the company stocked an item that he or she needs
urgently.
When a businessman wishes to conduct an urgent business with a client.
When a fax machine is not available
Importance of a telephone to people engaged in commerce
A telephone provides immediate contact between businessmen over a distance locally or internally
A discussion or conversation to clear the problem or seek advice or take other orders may take place
on telephone between the supplier and his or her customer.
The problems to people engaged in commerce
a)
A telephone does not provide a written confirmation of the conversation. Therefore contracts made
on telephones are risky because they may be disputed
later.
b)
A telephone is not reliable for messages that are highly technical and complicated in nature.
For
example it may not be advisable for trader to place for an urgent order for a spare part for a
complicated piece of equipment using a telephone.
c)
Communication can prove difficult for telephone users who do not understand each other’s language.
Telephone services of commercial value to business people.
These include:
 Personal calls: - A person call is a telephone call that specifies a person to whom the caller wishes to
speak
50
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 51 of 89





Local call: -A local call is a telephone call to another telephone number within the same area or within
the same telephone exchange
Trunk call: -Trunk means long distance calls. A trunk call is another distant exchange.
International calls: -An international call is a call from one country to another country
e.g.
A telephone call from Botswana to Zambia.
Transfer Charge Calls: -A transfer charge telephone service enables telephone subscriber provided
he or she agrees to pay for the telephone call before it is made.
There are many more telephone services available for businessmen and individuals.
2
Telex Service
Telex uses teleprinter, which is a combination of typewriter and telephone for sending written
messages via a typewriter keyboard over any distance locally or
internationally.
Each
teleprinter has a telex number, which is used to connect one teleprinter with another to a telex line
The message is sent first by dialling the telex number of the receiving teleprinter. As the message is being
typed on the sending teleprinter, the same message is automatically being received on the receiver’s
teleprinter,
The circumstances in which a teleprinter may be used include:  When sending highly technical and complicated messages e.g. when a customer
 wishes to place foe an urgent order for a spare part of a complicated piece of equipment.
 When written confirmation of the message is required e.g. When sending a quotation, letter
of query, invoice, statement of account etc.
Importance of a telex to people engaged in commerce







Messages may be printed on a teleprinter even when offices are closed.
Messages requiring written confirmation may be sent by telex
Messages of highly technical and complicated may be sent by telex
Telex can be used to send computer data
Telex offers a twenty-four service and therefore message can be received even when offices are closed
because the recording of message is automatic.
Foreign languages can easily be translated
Telex provide instant written messages.
3)
Facsimile (fax)
Fax is telecommunication service which is used for sending and receiving exact copies of documents including
exact copies of signature, pictures, diagrams and text over any distance either locally or internationally.
Each fax machine has a fax number that is used to connect one fax machine with another by way of
telephone numbers.
The message is sent by first calling the fax number of the receiving fax machine. Once an initial contact is
made, the document will be put on the fax machine for transmission. As the copy comes out of the sending
fax machine, the exact copy
of the same document is being obtained at the receiving fax machine. A fax
machine is indeed a long distance photocopier.
Importance of a fax to people engaged in commerce
 A fax can be used to send and receive messages when the office is closed on 24 hours basis.
 A fax provides an instant written communication
 A fax can be used to transmit highly technical and complicated messages.
 Foreign languages can be easily translated.
 Fax transmission may be useful to lawyers who may need exact copies of text, signatures,
documents etc, needed in settling court cases.
4)
Telegrams
A telegram is a telecommunication service that provides business people with a s seedy means of sending
urgent written messages to most parts of the country or the world. The message is telephoned or faxed to
51
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 52 of 89
the post office nearest to the
addressee and then delivered by hand. The charge for a telegram is calculated
per word and therefore unnecessary punctuated marks and statements should be left out in the message.
The use of electronic mail has reduced the use of telegrams service.
5)
Confravision (or video conferencing)
Confravission is a communication service that links a group of people in distance studio location by sound
and vision. Confravision enables people separated by
long distances to hold conferences. One of the
requirements for holding a confravision is for people to be at a local television station.
For example, a group of people in Kitwe, Zambia, can hold a conference by confravision with one group in
UK. The group in Kitwe would go to a local radio station and the one in UK would do the same. The two
groups will then be able to exchange ideas on various issues.
6)
Electronic mail
Electronic mail is a way of sending messages electronically via the telephone line
letters.
without the need to post
The person sending a message by electronic mail first prepares his or her information on a microcomputer.
He or she then transmits the message via a telephone network to a central computer. The person receiving
that message has to use another microcomputer and a telephone in order to get the message from the central
computer.
Electronic mail works much in the same way like the traditional post mailbox that the
letters
(ie
the
messages) are sent in an electronic form and the post boxes (ie. Computers) are opened via the telephone





Advantages of Electronic Mail
Electronic mail is fast
Electronic mail gives a written record of communication
Electronic mail has many facilities such as internets
Information is secret since subscribers use secret codes or pass word to access information.
Electronic Mail allows the use of computers.
7)
Teletext
Teletext is a communication service that enables people who have television with teletext to obtain a wide
variety network into a television or a computer reports, sports, news, cooking hints and other items of
general interest
8)
View data
View data is a telecommunication service that enables a person to transmit information through a telephone
network into a television or a through the same view data network.
The most important characteristic of view data service therefore is that it enables
send and receive information.
view data customers to
The importance of view data to people who are engaged in commerce include: It provides electronic mails
 It enables goods and services to be advertised
 It enables goods to be ordered on sale order forms transmitted by the supplier to the customer’s view
data. (i.e. computer) screen.
9)
Radio paging
A person to be contacted carries a bleeper and when it indicated that he or she is wanted by giving a bleezing
or buzzing sound. The person picks up the nearest telephone, dials a number and is then put through to his
or her call.
52
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 53 of 89
Radio paging is usually used in large working places such as hospitals factories, plants etc.
10)
Radio Message
Radios can be used to send urgent radio messages. For example, the owner of OBO ship who wish to divert
his ship from the original destination because of a local political crisis would communicate his message to the
ship master by radio
11)
Internet
Internet is a global network of computers which allows users to access world wide
information.
used for education, entertainment, business, electronic mails, advertisements, and World Wide Web.
Advantages of Internet
 Attractive and interesting adverts are shown in colour
 It has the widest coverage
 It combines visual impact with sound
 The user is able to receive the response immediately/it is fast
It is
Disadvantages of Internet
 It is expensive to maintain the website
 Needs specialised equipment (computers) to access the information
 May have limited coverage in certain countries
12)
Computers
Computers are used for storing and providing of information.
Information in a particular topic can be produced on a visual display unit (VDU) that is like a television
screen within seconds. Computers are used in all fields such as construction, medicine, the law, science,
economics, accountancy, and commerce. Sooner or later there will be no office without a computer.
The benefits of a computer include:  It provides speeder response to customer enquiries about the availability of good sin the retail shop,
warehouse or factory
 It improves customer’s relation due to fewer arithmetic errors more timely invoices and statement of
accounts.
 It provides Internet facilities useful for advertising the business and for sale of goods.
 It provides electronic facilities useful for exchange of information between the departments.
 It allows for managers to make better decisions
 It simplifies the resolving problems in various fields of work
 It improves the flow of information between information users
 It is useful in stock control and storerooms etc.
53
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 54 of 89
ADVERTISING.
INTRODUCTION
Advertising is a French word which means “bring to notice”. Goods and services produced must be made
known or be brought to the attention of the general public, thereby promoting and maintaining the
manufacturers’ market for the products.
What is the purpose of advertising?
Aims of Advertising
 to increase the sales
 to widen/increase the market
 to maintain the good will of the business/favourable image of the
business
 to educate the general public on the new and existing products
 to inform the general public on the nature of the goods and where the good are found and at
what price.
 to introduce or launch new products on the market
 to persuade the general public to buy the product or change their brand
 to keep/maintain the brand name in the minds of the public
 to sustain or create demand for the product
 Remain competitive
 Achieve market penetration
 Increase market shares
Other purposes for which advertising might be used for apart from increasing sales
making announcements in the change of business premises
death of an employee/termination of employment
54
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 55 of 89
-
warning customers of a faulty product/withdrawal of a product
calling for an Annual General Meeting
Declaration of dividends paid and financial statement
To make government announcements such as national insurance rates or change of the
school calendar by the Ministry of Education and new tax charges.
To make public announcements such as legal and company notices and announcements to public
by Zesco of mass electricity disconnections and load shedding
Advertise national campaigns e.g. road safety, health campaign against HIV/Aids.
To advertise new jobs and vacancies
To announce births, deaths, marriages, charity appeals, lost and found property etc.
How Advertising help companies to maintain and increase sales
 Advertising helps a company to maintain and increase its sales by
 informing customers or traders of new goods
 Reminding them of the existing goods.
 Persuading them to purchase the goods
 Inducing customers to change brands
 Using various methods of appeal
 Informing customers where goods are available and what price
 Possibly by reducing prices of goods to customers
METHODS OF APPEAL
Advertising must be effective to reach the intended people and it must be appealing to them, and cost less in
relation to the anticipated sales. To achieve this, the following method of appeal must be used:
Personality
famous people may be shown using a product in the advertisement such as Dr Kenneth Kaunda and Cherise
to give the product/service an acceptable image (Colgate and Ditto)
Ambition for success
The advertisement suggests that the use will be successful in his/her ambition such as Milo drink and Muzi
High School
Work Simplification
The product is shown in the advertisement to simplify work performance such as computers and cell phones
Social Acceptability
The product is claimed to make the user more acceptable to other people
Health
The product is claimed to make the user more healthier such as lifebuoy and protex
Display of goods
Attractive display of goods on windows and shelves may be used to win the consumer’s minds.
Excellence
The advertisement suggests that the services offered are of high quality such as Palmodzi Hotel and Lake
Road PTA School
Comedy
comedians may be used so that the advert can easily be remembered and the product will easily be bought,
such as Bikilon and Difficult.
Romance
The advertisement suggests that the user of the product will be more attractive to the opposite sex, eg Fair
and lovely cream, Romance soap and Geisha
Types of Advertising
A. Information Advertising
 This gives publicity by merely starting facts.
 It therefore gives services and does not seek to induce the consumer to buy the product.
55
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 56 of 89


Examples information advertising would include health warning on a packet of cigarettes, the use of
safety belts in a motor vehicle, the announcement of an election results etc.
It is aimed at creating a demand for a new product(usually used when launching a new product on
the market), changes made in the product and reminds the people of the existing products.
B. Persuasive Advertising
 This tries to induce the consumer to buy, by the use of certain key words, models or ideas
 It aims to create in the mind of the consumer pleasant association with product
 For example the use of female models to advertise cars and tobacco makes appear that buying such
goods the consumer will be able to attract the opposite sex.
 It can be instructional or product oriented
 Also the advertiser may use a good personality so that there is the implication that if you buy it you
will be as successful as the famous person advertising it.
 Advertising slogans are usually used to persuade the public to buy.
Dangers of Persuasive advertising
 It emphases only on the good point of the product, that is it does not mention the bad side of the
product
 It makes people to live beyond their means(extravagant)
 May promote dangerous and harmful products
 It contributes to the lowering of moral standards in the society
 It may go to extremes
 It may be indecent
 It encourages impulse buying
 May mislead or deceive customers
C. Collective/Generic Advertising
 It is where a group of organizations in the same trade or industry join together to advertise the
product for mutual benefit instead of competing with each other.
 They promote a product in general terms.
 For instance, the advertisement could be arranged by a Marketing Board, Tourist Board.
 Examples would include the advertising of eggs, milk industries, insurance companies and banking
institutions.




Advantages of Collective Advertising
gives general information about the product
may be cheaper as cost is spread between several producers
should increase overall demand for product
allows competitors to group together for mutual support
Why many companies who use collective advertising find it essential to use competitive advertising
 to defeat competitors
 to sell more goods
 to earn greater profits
 to give information on new products
 to obtain greater market share
 to emphasise own particular products
 to make use of other media
 to target different markets/market segments
 may not believe collective advertising is effective
Competitive Advertising
 This is undertaken by an individual company/competitors usually promoting it’s own product.
 By brand name
56
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 57 of 89



Against similar products of competitors
The product is highly high lighted as the most outstanding
For example Uni-Lever South East Africa may advertise its products as the most outstanding ones.
Dangers of Competitive Advertising to the Consumer
 adds to cost of the product
 may be misleading
 may be harmful/emphasises on good points of product only
 encourages impulse buying
 provided insufficient information may promote dangerous products
 encourages spending beyond means/being extravagant
What are the Benefits (Advantages) of Advertising to the manufacturer?
Advantages of advertising to the manufacturer:
 Enables the manufacturer to publicize the products
 Informs on both new and existing products
 Enables manufacturer to persuade the public to buy the product.
 Which may lead to increased sales ( stimulating demands)
 Increased sales may lower costs
 And increased profit may result
 Advertising brings competition amongst manufacturers of similar products
 Manufacturing may obtain information from advertisements on goods and services which are
available
 Manufacturers may advertise for staff vacancies.
What are the benefits (Advantages) of Advertising to the consumer?
Advantages to consumers:
 They are informed of goods services where they are found of which they might otherwise not be
aware and at what price..
 Especially new products
 It allows them to choose from a wide range of goods brought to their notice
 And may improve standards of living for may of the consumers
 It informs them of when, where, price, quantity , size and brand.
 Competition between manufacturers may lower prices improve quality of goods and services.
 Advertising revenues subsidizes the prices/cost for newspapers, entertainment, magazines and
other forms of media.
 It informs consumers of events, weddings, fairs, and air time tables.
 Introduced to new products
 Allows for a more choice form a wide range of goods
 Encourages competition between forms – lowers prices/ prices
 Allow for the spread of government information
 Local notices e.g births, marriages, deaths
 Local events notices.
What are the dangers (disadvantages) of Advertising to consumers
 Encourages overspending/impulse buying
 Makes people buy what they do not need
 and indeed what might harm them e. g smoking
 Encourages duplication of brands
 Encourages discrimination as a result of persuasive, as or appeals to the emotions
 It may mislead the consumers
 Sometimes makes false claims by publicizing only the better points of the product are mentioned.
 It may exploit the consumers, such as sex appeals and hero worship
 It may restrict the consumer’s choice of goods
57
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 58 of 89

It contributes to the lowering of moral standards(moral decay) in the society
What are the dangers (disadvantages) of Advertising to the manufacturer
 It may add to the cost of production especially if it is unsuccessful. The goods therefore, may
become too expensive for the consumer to buy
 Much money is used on advertising, and many people feel would be better spent on improving the
quality and efficiency of the product
 It may lead to reduction of competition, large firms are able to afford the best type of the media as
well as the wide spread of the media.
 In consequence, the small firms may not be able to compete and possibly close down
 some advertisements may not only be misleading but also wasteful, for example a firm may
advertise similar goods in direct competition of each other, giving the impression that the goods are
competing against each other, when in fact they are made by the same manufacturer
 this leads to duplication and waste of resources
How can a manufacturer of breakfast cereal whose products are well known justify the expense of a
national advertising campaign?
 The manufacturer of breakfast cereals must continue to advertise his well-known products because: The manufacturer must keep his products before the public
 To keep them informed that the products are still available
 Otherwise the public might buy his competitor’s goods, which were continuing to the advertised.
 It is also necessary to persuade new customers to buy the manufacturer products in preference to
their existing brands.
 A national advertising campaign is necessary because breakfast cereal is a family product nationally
distributed and formed in most households.
 It is therefore necessary to reach most consumers in the country.
Why it is necessary to control advertise standards or protect consumers from some forms of advertising?
 Advertisers may attempt to mislead or deceive customers in an effort to improve sales.
 And may make untrue statements/false
 Some advertising may undermine social standards.
What is a code of Advertising Practice?
 it is a voluntary agreement
 Set- up by the advertisers themselves
 To establish professional standards
 By which the public are protected
 From dishonest or misleading advertising
 The basis of the code is that all adverts should be legal, decent, honest and truthful.
 And should be prepared with the sense of responsibility to both the consumer and the advertising
industry in general.
What is the purpose of a code of advertising practice?
 To protect consumers from misleading dishonest, untruthful advertisement
 From unscrupulous advertisers
 By laying down rules, which require that all advertisement are legal, honest, decent and truthful
How may such protection be given?
- Protection is given by: A code of Advertising Practice Administered by Advertising standards Authority
 By law
 The Government
 The Law
 The law has some control over advertising
58
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 59 of 89

The Trade Description Act 1968, the Misrepresentation Act 1967 and the Theft Act 1968 provide
some control over untruthfulness in advertising.
The Government
May also place control on advertising
For example, it places a Government health warning on all cigarettes packets sold, like tobacco is harmful for
your health
What are Advertising Agencies?
These are separate firms specialising in helping the product of a seller to reach potential buyers and
stimulating demand.
They are a business which specialists in helping the seller with his advertising requirements.
What are the functions of advertising agencies?
they perform such functions as: Giving advice and assistance on choice of media
 Reserving or booking space or time on media
 Placing the advert on the media
 Creating or preparing or designing the advertisement.
 Undertaking market research relating to packaging price etc.
 Produce the advertisement
 They supply market information on what will stimulate an increase in demand of the goods(market
research).
 They assist in general public relations work for the seller.
Why are most National Advertising Campaigns undertaken by advertising agencies
Advertising agency used because: it may not be economic for the company to have its own full time advertising staff or department.
 Or it may not have staff with necessary experience in large scale advertising.
 An advertising agency however undertakes work for many.
 And has highly specialised staff to assist with all aspects of advertising Such as: Give advice on choice of media
 Booking space and time on media
 Produce the advertisement
 Market research-commercial with obtained information.
What should you consider when designing an advertisement for a part- time job in a shop?
 Content of the advertisement
 Display of the Advertisement
 Layout of the advertisement or the key words.
 Where the advertise to be placed
 Cost of advertising
 Whether it is a one-off or a repeat
Advertising Media
A channel for communicating advertisement
Factors which would influence the choice of media
The factors which would influence the choice of media are
 what type/ class of person will buy the product (i.e to what type of person is the product aimed (Target group).
 What area is to be covered by advertising campaign i.e Extent of Market
 What type of the product i.e nature of the product (some must be demonstrated)
 How much is the advertising budget for the campaign (how much can the company afford e.g T. V expensive.
 What profits are expected from the sale of the product (cost of advertising must be covered)?
1. National/National Press and Local Newspapers
Commonly used because of it’s wide coverage
Large number of consumer
But limited only to those who are literate
59
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 60 of 89
Advantages of Newspaper advertisement
 they give a wider national coverage
 they are relatively cheap than television adverts
 the advert can be placed in appropriate places in the paper to catch the eyes of the leaders
 information can be stored and referred to later, so it gives a long life to adverts
 the use of daily newspapers for advertising ensures an immediate coverage of the intended audience.
 The advert may be more detailed
 It may be passed on to others
 Can circulate amongst readers
 Space can easily be booked
Disadvantages of Newspaper advertisements
 they are perishable, as a result advertisements have short life because very few people keep newspapers for
future reference and they may be used by traders for wrapping things.
 Poor quality of print may reduce the effectiveness of the adverts
 Newspaper advertisements are not accessible to illiterate people
 They may not be taken very serious by some readers.
2. Magazines e.g Women’s magazines
 This can give attractive coloured illustration of Advertisements]
 Can be kept people for a quite a length time (more permanent)
 Special coupon offers can be made.
 Magazines may be seen by a number of customers
 Magazines may have limited leadership
 And appeal only to a certain classes e. g to women
Advantages of magazines for advertising
 they offer targeted advertising
 they are aimed at a specific class of people who are expected to buy the product, for example, breakfast cereals
in the women’s magazines is appropriate as it would target the women.
 They may also be seen by many readers other than the person who bought it
 The advert can be illustrated in a colourful way and on good quality paper to create aspiration
 Special coupon offers can be made
 They have a long term impact as they can be kept and referred to later
 It is cheaper to advertise in magazines than television
Disadvantages of magazine advertising
 they are relatively more expensive than, henceforth, they are not as widely read as newspapers, as a result they
reach fewer people
 they may have a limited readership
 they appeal only to a certain class of people
3. Television
 it reaches a wide range of customers
 Visual impact as well as sound( Easy to remember what you see and hear)
 It shows (demonstrated) visually) the usefulness of the product, its quality and how it is used.
 It can be shown or appropriate times for housewives/family
 It is very expensive
 Not always well received by the viewing public
Advantages of television advertising
 it combines visual impact with sound, so it is very effective(lasting impression – sound and vision)
 it gives the widest coverage(massive coverage)
 it can be seen by many viewers especially at peak hours
 it can be shown at the right time for the right audience(time selectivity, that is can be shown at specific time)
 it reaches people’s homes when they are relaxing, so it can create an aspiration
 can be booked at peak hours, eg. News time
 the advert can be repeatedly be shown
60
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 61 of 89
Disadvantage of television advertisements
 it is very expensive
 it is not always well received by the viewers
 they tend to be short lived and may not produce a long lasting impact
 they are very few television sets in rural areas
 not all the places have television signals
 some people may take them as entertainment
 they may be submerged in a large number of others if not well planned
4. Radio
 Reaches a wide range of customers, even people in remote areas in the country.
 Many people own Radio
 Cheaper for the producer to advertise on Radio
 Advertisements are broadcasted at various times during their programmes transmissions.
 Advantages of radio advertising
 it has the widest coverage
 many people have access to the radio
 radio signals reach almost everywhere, including the remotest place
 many radio stations are now available, this provides an opportunity to target a particular ethnic group
 repeated adverts are possible
 the specific audience can be targeted at specific time/language
 it is cheaper than television
 it has a lasting impression through catchy tune or jingle
Disadvantage of radio advertisements
 the advert can only be heard and not seen- no visual stimuli
 the advert may only be received by a secondary audience who may not may much attention to the advert
 radio adverts tend to be short lived
5. Window Dressing
Designed to attract consumers into a retail outlet
And keep their attention to buy goods when inside the store.
6. Free samples
Are often given to advertise a product which is new on the market
For example a brewery may allow its customers a free first point of a new beer to persuade them to buy more of it
afterwards.
7. Posters
Can be seen on hoardings everywhere
Persuades and informs the local people or community
Local people can afford the type of media
Cheaper than any other forms of media
They convey the message visually to passers by
Advertisements can be placed on bill boards or on sports stadium headings.
8. Leaflets/Hand Bills
Can be handed out by advertisers
Normally done by local advertisers such as by a hairdressing salon showing reduced prices
May be cheaper than either television or Magazines
Not permanent
9. Plastic Bags
Can be printed with the name of a firm and given away with each purchase.
This is a cheap form of advertising.
61
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 62 of 89
10. Clothing
Manufacturing will often print their name or symbol in a prominent place for every one to see
For example the word “Levi” is seen on Jessie and Pullovers.
Footballers have sponsor’s name displayed on their football shirts.
11. Illuminated Signs
These are frequently found on premises near busy centres.
12. Trade Journal
Used by companies when:Targeting a particular group
As trying to attract wholesalers and retailer
Because arising to sell through them
Able to give detailed information (full description)
Wholesalers and retailers read these magazines
Other means of advertising may not be so effective.
13
Trade exhibition/fare
Advantages of Trade Fare
o customers are able to see the actual product/service
o able to target certain group for various products/goods
o clever display may attract/encourage impulse buying
Disadvantages of Trade Fares
o customers who do not attend shows may miss out
o as it appeals only to people who attend the show
o or are passing near the exhibition place
BUSINESS UNITS
By Business Units we mean the way businesses are owned and operated. These are determined by the way they raise their capital,
ownership, control and objectives. Zambia is a mixed economy, this means that it has both privately owned businesses (the private
sector) and state owned industries (the public sector).
The following are the various types of business units
1.
Sole trader
2.
Partnership
3.
Private Limited Company
4.
Public Limited Company
5.
Public Corporation
6.
Co-operative
7.
Holding company
1.
Sole Trader
CHARACTERISTICS OF A SOLE TRADER
It is owned and contrlled by one person
Owner raises the capital to operate the business from personal savings or from borrowing from relatives of friends.
This is therefore a difficult way to raising capital
The owner manages the business without assistance from his employees
He can therefore make any independent decisions and changes any time he wants to.
All the profits go to him (sole proprietor) and has to bear all the risks or losses.
There is no legal distinction between personal property or the owner or the business and the assets of the business(has no
separate legal entity).
62
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 63 of 89
-
As a result in such a business the owner has unlimited liability
Meaning that if the business owes money to a lot of people such that money from the business can not be enough to repay,
the can go to the extent of selling the personal property in order to recover the money.
The sole proprietor does not pay company tax but personal income tax.
It lacks continuity as the business dies with the owner
Has great flexibility when it comes to decision making
The owner enjoys all the profits alone
He provides personal service to her/his clients
s/he needs little documentation to start the operation of the business
does not need to communicate or inform the general public on the operations of the business
Advantages of a Sole Trader
No sharing of profits because all profits go to her/him.
The owner makes independent decisions(has great flexibility)
He does not pay company tax but only personal income tax
It is easy to establish such business as there are less formalities required to set up the business
It is easy to organize and manage because the owner does not need to consult anyone in making decisions.
The owners of the business give personal attention to customers.
Needs less documentation to start the business
Able to supervise (if any) staff closely
Disadvantages of Sole Trader
It is difficult to raise capital and hence difficult to expand
May not enjoy the economies of large scale production due to limited capital such as favourable discount from the
manufacturer
Unable to employ specialist workers in order to provide the expertise to the business
He has unlimited liability
There is no legal distinction between the owner nd the business
Lack of continuity in case of death or illness of the owner.
Suffers all the losses alone
Has all the worries/risks of the business
Partnership
A partnership is merely agreement, usually in writing by means of which several individuals trade together with view of
making profit. A written arrangement usually take the form of Articles of Partnership or Partnership Deed
Partnership deed
This written agreement is known as a partnership deed and it staes the following:
The names of the partners
The name of the business
The amount of capital each partner contributes
The ratio in which partners are to share contributes
The ratio in which partners are to share the profits/losses
Also the rate of interest payable on capital e.g. 6% of each partner’s capital
The duration of the partner ship.
The amount each partner may withdraw for private use
The manner in which the accounts are to be kept and audited.
Whether any partner is going to receive a salary or not
The rights of each partner
The procedure of admittinf a new patner
In the case of disputes how shall they be resolved
Types of Partnership
the two types of partners are
63
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 64 of 89
Ordinary Partnership
All the partners in this partnership have unlimited liability i.e. they all stand to lose their personal property in case of business
failures.
In this partnership each partner has equal powers and responsibility
Each partner takes an active part in the management of the business.
Limited Partnership
The type of partnership in which some of the Partners have limited liability
This means that the liability or the limited partners is only confined to the amount they have invested in the business.
However he doesn’t share in the profits
Although in a limited partnership there must be at least one general partner whose liabilities is unlimited.
A limited partnership must not be registered with the register of the companies
Differences between Ordinary and limited Partnership
In an ordinary partnership all partners have unlimited liability where as in limited partnership some partners have limited
liability
The limited partner do not have the final voice in the Management of business though they share in the pofits where as in an
ordinary partnership all the partners take part in the management of the business.
Types of Partners
There are three types of partners
Active Partner
This is a type of partners who take active role in the running of the business and has unlimited liability.
Sleeping Partner
This is a type of partner who does not take part in the running of the business but has contributed some money towards the
capital and only participates in the sharing of the profits.
Nominal Partner
This is a type of partner who allows his name to be used in the business but does not contribute money towards the capital
neither does he participate in the sharing of the profits.
Characteristics/features of partnership
Its has two partners and maximumof 20 membersexcept for professional partnerships who are allowed to be more that twenty
A partnership is based on a partnership deed.
A partnership is not a separate legal entity
Partner usually have unlimited liability
Controlled and owned by partners
A partnership ceases on the death of a member(lacks continuity)
Easy to set up because they are few documentations e.g. partnership deed.
Accounts of partnership are not made public (they are private)
Capital is raised through the contributions from the partners
The Advantages of changing from a Sole Trader to a Partnership
They will have more capital than that of a sole trader.
Partners are able to raise additional capital more easily.
The business benefits from the expertise of both/all the partners e.g. one may be an accountant and the other a marketer
There will be division of labour between/among the partners
The partners can consult each other (sharing of ideas) in solving problems.
The overhead expenses may be saved by closing one shop or premises and concentrate on one side.
Additional savings may be made because duplication of advertising will be avoided.
There is better utilisation of capital
Disadvantages with the Partnership type of Business
The Profits of partnership have to be shared amongst partners
There may be disagreements between/among the partners
Decisions may not be so speedy
Decisions are binding on all partners even if one of them has not been consulted and may cause problems.
Relationship in partners can be broken up by conflict between partners
Capital may be more difficult to withdraw
Lacks continuity as the Partnership becomes dissolved on the death/retirement of an individual partner
Partners have unlimited liability except for limited partners in limited partnership
Lack of capital may limit expansion
Membership in partnership is limited to 20; this restricts the firm’s ability to raise more capital.
The business has no separate legal entity
64
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 65 of 89
SIMILARITIES BETWEEN THE SOLE TRADER AND THE PARTNERSHIP

both the sole trader and the partnership have unlimited liability

both have no separate legal entity

both lacks continuity as they come to an end upon the death of the partner or sole trader.

Both are directly controlled by the owners

Both keep their financial records separately
DIFFERENCES BETWEEN THE SOLE TRADER AND THE PARTNERSHIP

A sole trader is formed by one person while the partner is formed by 2 to 20 people except for professional partnerships

A sole trader does not share profits with any one while profits of a partnership are shared amongst the partners

There is no division of labour in sole trader while in partnership there is division of labour

A sole trader raises capital from personal savings while capital in partnership is raised from contributions from the partners
JOINT STOCK COMPANIES
These are a types of business where the owners have limited liability i.e. their liability is limited to the amount inversed in
the business.
The owners of limited companies are called share holders because they buy shares
The capital of limited companies is divided into shares and it is known as share capital.
Shareholders elect board of directors who control the business.
The board of directors appoints managing director who is responsible for day to day running of the business.
The board of directors appoints managing director who is responsible for day to day running of the business.
The share holder have little say or powers in the general running of the company except that they have a role at the Annual
General Meeting (A.G.M.)
the shareholders have limited liability,
limited companies have separate legal entity from its owners
Procedure in the formation of companies
There are certain legal requirements that must be before a limited company can be formed.
The following are the requirements:
1.
-
MEMORANDUM OF ASSOCIATION
This is an application to the registrar of companies that a company may be formed by
promoters of the companies. It
relates to the external affairs of the business
This memorandum is given to the registrar of companies before a company is incorporated
It states the following:
The name of the company with the word Ltd or plc after its name
The objective (aim) for which a company is established.
The address where the registered company will be situated (Headquarters)
The statement that the liability of shareholders is limited.
The amount of capital showing its divisions (shares)
A statement whether it is private or public
The number of shares to be taken by each of the Directors.
Reasons for including these items
The name of the company is there because no other name will be mixed with the name of another company.
The company must state the objective of the company because it is required in order to make known what the
company is going to do.
The company must state the address where it will be situated for easy contact
The statement that liability is limited to show that shareholders’ liability is limited to the amount invested.
A statement of amount or capital is necessary in order to let what would be shareholders to know the amount to
shares and types.
2.
Articles of Association
it is a document setting out the constitution and regulations (set of rules) of a registered company.
These rules are drawn up to govern the internal affairs/working of the company.
There rules include:
the rights of shareholders
the powers of directors
the procedure of meeting
the procedure of dividing profits
the procedure of dividing profits
borrowing powers of company
The issue and transfer of shares
The method of audit
the articles of association is then submitted to the registrar of companies.
65
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 66 of 89
3.
-
The registrar of companies examines the two documents (memorandum of association and articles of associations)
If the registrar is satisfied, he allows the company to start by issue certificate of corporation.
-
Certificate of incorporation
It is a confirmation by the registrar of companies that a company can start trading
It recognizes the company as a separate legal body
But a public limited company must first issue the prospectus.
The certificate or incorporation contains the following information:
(a) The name of the company and its registered number
(b) A statement that it has been registered in accordance with the law.
(c) The signature of the registrar.
Prospectus
it is an invitation to the public to come and subscribe/buy shares.
It gives details of the shares of the company and the price at which they are offered.
It also provides details of the company’s past result (history) as well as as future prospects.
In other word the prosectus is an advertisement
The registrar will then issue the certificate of trading so that the public limited company can start its operations.
-
Certificate of Trading
It is authority issued by the registrar of companies to allow the formed company to start the business.
4.
5.
The two types of limited companies are:
1. Private limited company
2. Public limited company
Characteristic of Private Limited Company
owners are share holders
Minimum of two share holders but no maximum number
It has a separate legal existence from its shareholders
Shareholders have limited liability i.e. can only lose amount paid for shares
It must be registered with the registrar of companies.
Many legal requirements to set up a private limited company e.g. memorandum of association and articles of association
have to be submitted to the registrar of companies.
a private limited company does not need a certificate of trading to start operating
Profits are distributed to share holders as dividends
Managed by board of directors who are elected by shareholders
Board of directors appoints the managing director who is responsible for the day to day running of the business.
Capital is raised through Sale of shares
shares for a private limited company cannot be offered for sale to the general public i.e. they cannot be quoted at the stock
exchange.
More capital and borrowing capacity
There is continuity of business even when one share holder dies
Private limited company has LTD after its name
Accounts are filled with the registrar of companies and are not published
The capital and ownership of a private limited company is divided into shares
The Characteristics of Business Units can be summarized as follows:
ownership
capital raised
control
profits
formation
relationship (unlimited and limited liability)
Characteristics of Public Limited Company
The company is owned by share holders
It is a separate legal entity
Share holders have limited liability
Set up by minimum of two shareholders but no maximum
Registered with the registrar of companies
Many legal requirements e.g submits memorandum and articles of association
And it requires trading certificate
Capital is raised through the sale of shares to the public
It issues a prospectus in order to appeal to the public for them to buy shares
Share holders elect a board of directors at the Annual General Meeting.
66
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 67 of 89
-
Board of directors controls the workings of the company
Day to day running of the business in under the control of managing director
Public limited company has the motives of making profits
Profits are distributed to share holders as dividends
Name ends with PLC after the name of the company.
Advantages of a public Limited Company
All the shareholders have limited liability
It has greater borrowing capacity as banks are more willing to lend money to large businesses
It has greater continuity as the business continues despite the death of a shareholder
It has separate legal entity from its shareholders
Shares are quoted on the stock exchange hence greater possibility of raising capital
They enjoy economies of scale
It is able to merger or takeover or acquire other businesses
Disadvantages of a Public Limited Company
It has more cost and more legal formalities in forming a public company, for example registration of the company with the
registrar of companies and issuing of the prospectus
They are subject to takeover if another company buys 51% of shares
Management of the public Limited Company becomes difficult as the company grows in size
The separation between shareholders and the people managing the company may lead to conflicts with the shareholders
The publication of financial accounts for public inspection reduces the privacy of a public limited company
There are more formalities in running a public limited company, eg holding of the Annual General Meeting and quoting of
the share on the stock exchange.
Explanation of the following terms:
Public
The general public is invited to buy shares through the prospectors i.e. open to the public.
And the information regarding the company is made available to the member of the public.
Limited
This means that the liability of individual shareholders is confined/restricted to the amount they have invested in the business.
Therefore the shareholders’ personal possessions are not risk
This protection enables small investors to invest in industries without fear.
And therefore enables companies to obtain larger amount of capital.
A Separate Legal Entity
This means that the company has its own legal existence
It is separate from that of its shareholders
Thus a company can enter into contracts in its own name and it can sue or be sued.
Board of Directors
These are leaders of the company.
They control the business
They are elected by shareholders at the Annual General Meeting
They appoint the managing director who is in charge of day to day running of the business
They recommend the rate of divindeds p[ayable to shareholders
Managing Directors
He is charge of day to day running of the business
He co-ordinates policy matter of the company
Annual General Meeting
A meeting held yearly by shareholders of the company.
At this meeting, Board of Directors gives financial report and other reports.
At this meeting accounts of a company are approved nd board of directors are elected.
The aims of electing the Board of Directors are as follows
(a) Approve the audited accunts presented by the managing Director
(b) Elect Board of Directors
(c) Receive the Directors reports
(d) Discuss the affairs of the company
(e) Deal with issues that could not be sealed by the Board of Directors
Share Capital of the Limited Company
A share is a unit of capital.
The capital of a limited company is divided into small units called shares
67
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 68 of 89
-
As such the capital of a limited company is known as share capital
There are three types of share capital.
1.
Authorised or nominal capital, the maximum capital the company is allowed to issue to its shareholders
2.
Issued Capital, the amount of capital already taken up by the shareholders
3.
called up capital or paid up capital, the amount of capital already taken up, received and paid for by the shareholders
These include:
1. Founder or Deferred Shares
These are sahres sold to the original founders of the company.
The holders of these shares receive a divident after the claim of all other shareholders have been met.
They are referred to as deferred shares because at times they may not receive the dividends in a given year but will have to
be paid the following year.
2. Ordinary Shares
These received divident after preference shareholders have been paid
These receive a variable rate of divident dependent on the profit made
And have voting rights
Ordinary shares are more to risk form of investiment than preference shares so it appropriate.
For example when a company is forced into liquidation, the ordinary shareholders are usually the last in the distribution of
assets.
3. Preference Shares
These receive divident before ordinary shares.
They receive a fixed ate of dividends, e.g. 8% of K100,000 preference shares means
8
x 100 =K8,000
100
Preference shareholders have no voting right at the A.G.M. therefore have no say in the running of the company.
In the invent of business failure, they have the first claim in the distribution of company assets.
Prefrence shares may be participating preferences shares or cumulative preference shares and redeemable preference shares.
Participation Preference Shares
These have the right to claim in the excess profits
They are able to receive a bonus from profits made in a good trading year.
They receive such bonus fter payments have been made to all types of shares.
Cumulative Preference Shares
These have a claim to divident arrears.
This means that if the business cnnot aford to give the cumulative preference the right amount of divident in one year, the
amount to be paid is carried forward in the next year.
It may be a number of years before te business makes a good profits and all divident arrears from previous years will be
added together to form payment to cumulative preference shares.
Redeemable Preference Shares
These are type of shares which a company buys back from such shareholders after a given period of time e.g. 3 years.
This means that after such a given period of time any holder of such shares ceases to be a shareholder.
The Difference Between Preference and Ordinary Shares
Preference Shares receive divident before ordinary shares usually at a fixed rate (percentage)
Preference shareholders have no voting rights
And they may be participating, cumulative and redeemable preference shares
Whiles ordinary share:
Receive a variable rate of divident (no fixed percentage) dependent on the profits made.
And they have voting rights
Ordinary shares are more risk form of investment than preference shares
What are the sources of finance for public company
1.
-
Debentures
These are a long term loam to a company which receive a fixed rate of interest
This fixed rate of interest is payable to debenture holders whether profits are made or not.
Debenturs holders are creditors to a company
They have no voting rghts because they are not shares and have no say in the controlling at the business
And usually they may have to be secured against assets.
Debenture holders can force the company into liquidation take over and sell the business if the company fails to pay interest
or repay capital.
Differences between a share and a Debenture
68
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 69 of 89
-
Shares represent ownership of a company and receive a divident out of profit
Debentures represent a loan to a company and receives interest at a fixed rate whether a company makes a profit or not.
Debenture holders have no voting rights while some shareholders have voting rights.
Shareholders are owners of the compay while debentureholders are creditors of the company
Loans from commercial Banks (see notes on banking)
for a specific sum of money repayable by instalments
usually for capital items
Overdrafts (see notes on banking)
they overdraft on a current account
usually to meet day to day expenses
Share issue/RIGHT ISSUE
The reason for the choice of share issue include:
Share issue can attract capital from many potential investors.
No interest is paid on capital raised.
The large sum of money required for the purchase of additional premises and equipment can be easily raised by sale
of shares to public.
There is not repayment of capital once a person has bought shares.
Shareholders can pay for shares in instalments.
Share issue can be used to raise more money only if the company has not exceeded its
authorised capital.
The sale of shares of a public limited company is easily organised through stock exchanges
Ploughing Back the Profits
A company that makes good profit may not distribute all of it to its shareholder
May retain some of the profits to fund business activities
where some profits are put back into the bussiness
The reasons for the choice of ploughing back the profit as a method of financing includes:

no collateral security may be required

there is no cost of borrowing the money

retained profits are readily available

some profits may be kept for emergency or difficult times

retained profit can be used to repair company machinery or buildings
Trade credit might be used as a source of finance for the firm by:
by allowing the firm to purchase goods without immediate payment for them.
by allowing the firm to sell goods at increased price before payment.
by allowing the firm to pay for goods from the sales revenue.
Leasing of Equipment
- this is where company property is mortgaged.
Differences between Public limited Company and Private limited Company
A private limited company is open only to private individual whiles a public limited is open to the public to buy shares
In a private limited company shares are not freely transferred whilst in a public limited company shares are freely transferable
at the stock exchange market where the buying and selling of shares takes place
It is easy to from a private limited company because formalities are less whilst it is harder and more costly to form a public
limited company because they are more formalities in setting it up.
A Public limited company can raise more capital whilst in a private limited company the number of shareholders restricts its
capital.
A Private Limited Company can start trading as soon as it is incorporated but a Public Limited Company must wait for the
Certificate of Trading which is given after the norminal capital has been raised
Similarities between a Private Limited Company and Public Limited Company
Both are registered with a registrar of companies
Both are separated legal entity from their shareholders
Shareholders for both enjoy limited liability
Both companies submit memorandum of Association and Articles of Association
A minimum of 2 members and no limit is required for both companies
Both are subject to company tax of the profit earned per annum.
Bot are legally required to hold an Annual General Meeting
Both are owned by the shareholders
They are both controlled by the Board of Directors
69
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 70 of 89
Why may a private limited Company not wish to become public
Cost in time and money in the formation of a plc e.g. stock Exchange quotation.
Publication of accounts: simplify files accounts with the registrar of companies.
Public companies may be easilysubject to take over by the government by obtaining 51% of shares.
Difference between a private limited Company and a Partnership
A private limited company has two to unlimited number of shareholders whilst a partnership limied to 20 partners.
In a private limited owners are shareholders wishing in a partnership, owners are partners.
A private limited company shareholders have limited liability while partners have unlimited liability.
A private limited company has continuity on the death of a member whilst with a partnership no continuity on death of a
pertner.
Many legal requiremnet to set up a private limited company e.g. memorandum of association aand Articles or Association
whilst with a partnership it is easy to up few documents required e.g. partnership deed.
A private limited company has more capital and have borrowing capacity whilst partnership lack capital and borrowing
capacity to expand.
Advantages of a private limited company
a private limited company has greater continuity on the death of a shareholder
more capital is available and have borrowing capacity
It confers limited liability for all the shareholders
It is a separate legal entity
Shareholders are protected from malpractices and fraud due to some formalities required
They are not easily subjected to takeovers
They do not publicise their information
Disadvantages of Private Limited Company
more formalities in forming of a private limited company e.g. register with registrar of companies.
More formalities in the running of a company e.g. the Annual General Meeting must be held each year.
Activities of private limited company are limited to what is memorandum of Association.
Private limited company cannot advertise their shares through the prospectus to the public
If it want to expand further it should become a public limited company
It is less flexible than a sole trader because its activities are restricted by the Meomorandum of Association and Article of
Association
Multinational Companies
These are enterprises which have subsidiaries or branches in many countries. They are usually Public Limited Company. Examples
includes shoprite, BP (Z) Plc, CocaCola Bottlers, First Quantum Minerals (FQM) Plc, Unilever South East Africa, PEP Stores, Shoprite
checkers etc. They provide employment to the host government and they are a source of income to the host government, hence they
are welcome by most of the countries. Their decision making is controlled by the head office where the parent company is and
implement to all the subsidiaries.
Advantages of Multinational Companies
They pay tax to the host government which boosts the economy of the country
They bring new technological skills to the country
They provide employment to the local citizens
They bring foreign exchange
They provide vital goods and services
they improve mutual understanding between the host country and the parent country
Disadvantages of Multinational Companies
They tend to exploit the underdeveloped economies
They usually bring their own experts instead of training the locals to participate in the decision making process
They can prevent the transfer of technology by ensuring that all the research is done in the parent country
They disadvantage the local industries by offering better conditions of service and salaries
They are centrally controlled and do not take into account of the conditions in the host country when changing policies
The companies take back home with them to their home countries all the profits made in the host country. This drains away
the host country’s foreign exchange reserves
Public Corporation
These are state owned businesses and they are referred to as nationalize industries. It can either be controlled by either the central
or local government for conducting business for the benefit of its citizens. It is set up by an act of Parliament.
Characteristics of a Public Corporation
Ownership:They are owned by the government on behalf of all the citizens in the country i.e. community as a wide.
Formation: It is set up by an act of parliament.
Control: Board of directors are appointed by a minister in charge of ministry
70
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 71 of 89
-
It is the minister who has the overall responsibility
And it is the board of directors who take charge of the day to day running of the business
Parliament investigates the working of corporations through select committees
Source of Capital: Capital is raised through the government grants (loan) e.g. by the government giving treasure advances
from taxation bonds.
Purpose: The motive for setting up public corporation is to provide goods and services at reasonable price
Therefore profits are used for improvement of infrastructures e.g. education and helath service.
Public corporation may plough back any profits they may make and they may borrow money from the banks.
Difference Between a Public Corporation and a Public Limited Company
A public limited company is owned by shareholders whilst a public corporation is owned by the government.
In a public limited company, profits are distributed to share holders as dividend as for a public corporation, profits are used
for improvement of infrastructures.
For a public limited company, capital is raised through sale of shares to the public whilst in a public corporation capital is
raised through government grants.
In a public limited company board of directors are elected by the shareholders whilst in a public corporation board of directors
are appointed by a minister in charge of a ministry.
Board of directors control the working of public limited company whilst parliament investigate the working of corporation
through select committees.
The public limited company is set up by a minimum of two shareholders whilst the corporation is set up by an act of
parliament.
The motive of selling up the public limited company is to make profit while that of a public corporation is to provide service.
ADVANTAGES (arguments for) setting up a Public Corporation
the government can control the provision of essential or strategic goods and services such as electricity
they are usually big, so they enjoy the economies of scale which results in cheaper goods and services
they provide secure employment to a large number of the local people
they help to implement government policies such as on prices of essential goods an services
they provide comprehensive services such as health, education and energy
they are a source of income to the government, thereby helping to reduce tax
they reduce duplication of employment and necessary wastage of resources
Disadvantages (Arguments against) setting public co-operations
they can be inefficient and wasteful
because of their monopolistic nature, they tend to provide poor quality of goods and services
all loses made by public corporations are to be borne by the tax payers
the “I do not care” attitude dampens the enthusiasm of workers
they are too expensive to run and over stretches the tax payers money
lack of initiative amongst workers leads to inefficiency
workers do not usually identify themselves with the enterprise
there is too much bureaucracy and red tape in decision making
they are highly subsidised by the government to keep them afloat
- some politicians have little commercial expertise or experience to run businesses along efficient lines.
The Finance of Business Units
The Trader’s Capital
A.
The money invested in abusiness is called its capital. It includes everything that is used in the business
from the money used to set it up to the labour hired and equipment purchased to help run it. The capital of
a business consists of fixed capital and working capital.
1.
Fixed Capital
71
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 72 of 89
Fixed capital is the money usd to buy fixed assets i.e. items which are bought to be used permanently over
a period of years and which enable the business to run. Fixed assets do not form part of the end product or
they are not for general sale. They include land, buildings, machinery, furniture, office equipment, and
motor vehicles. All these are used to enable production to take place or to enable business to generate
profit.
2.
Working Capital
Working capital is the money which a business must have available to meet its day to day expenses such as
paying workers’ salaries, buying raw materials or stock, paying water, electricity and telephone bills, and
so on. It also includes money owed to the business by customers and balance (as well as cash in the till).
Working capital is, in fact, th amount by which current assets exceed current liabilities. It can be calculated
by the formula:
Working Capital = Current Assets – Current Liability.
The word current here means short term. That is to say, the assets and liabilities are constantly changing,
for example cash, stock of goods and or raw materials, and the like.
(a)


Working capital can be increased in the following ways:


By the injection of more cash by the owners of the business
By borrowing from outside sources and in the case of public limited companies, by issuing
debentures.
By ploughing back profits made during past trading years.
By selling some of the fixed assets (thereby increasing the cash balance).
(b)



Working capital can be reduced by the following ways:
By the owners of the business withdrawing cash for their own use;
By the company making a loss on its trading;
By purchasing more fixed assets for cash.
Adequate working capital is important because it is what enables the company to pay its creditors promptly
and buy or replace stock easily without looking for further financial assistance. Lack of working capital
will not only restrict expansion but may push the business into insolvency, closure or liquidation.
3.
Capital owned
This is the total amount that the business owes its owners. It is a measure of the net worth of a business. It
is calculated as assets minus external liabilities. Capital owned can be increased by a company making a
profit and decreased by the company making a loss.
4.
Capital employed
The capital employed is the sum of the company’s assets, both fixed and current that the company has
invested, whether borrowed or not. It is in fact, the amount of wealth or assets which are being usedin the
company to earn income. It is calculated as: Total assets minus debtors.
5.
Liquid capital
This refers to thoose assets, such as cash at bank till and any assets that can be easily converted into cash
e.g. stocks and bonds held by the business.
B.
Sources of Capital to a Trader
The sole trader and perhaps a partnership will raise capital from personal savings, borrowing from
commercial banks as well as from friends and relatives. A limited company, especially a public limited
company, however, has many more sources of capital some of which are given below.
1.
The sale of shares
The capital of a limited company is divided into units of uniform value called shares. The company raises
its capital by selling these shares to the public and such a capital is known as the share capital. Different
types of shares are discussed in detail at a later stage in this chapter.
2.
Debentures
72
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 73 of 89
These are not shares but long-term loans given to the company by the investing public. They may have to
be secured against some assets. A company wishing to raise extra capital can borrow money from the
public and issue them with stock certificates showing the loans. What this means is that the company sells
debentures. They may be issued for a fixed number of years after which they are redeemed.
It should be made clear that debentures are loans for which a fixed rate of interest is paid (to debenture
holders) whether the company makes a profit or not. If the company should be liquidated, debenture
holders are repaid first before the shareholders can get anything. Debentures are, thefore, a safer means of
investing in a company and can bring assured returns if they are issued by profitable companies.
3.
Loans
The traditional way of raising capital is by applying for a loan. A loan from commercial banks, insurance
companies and other financial institutions can be very vital to a business. Loans are usually given for a
specific purpose, mainly for the purchase of capital items and are repayable by instalment with interest.
4.
Overdrafts
These are givnen on a current account to help the company or business meet its day to day expenses. It is
normally given for short term needs only and interest has to be paid on fluctuating daily overdraft balance.
After spwnding large sums in establishing the capital items necessary for production to take place, a
company may find itself short of working capital. It can then obtain an overdraft to help run the business,
i.e. by stock, pay bills and salaries and so forth.
5.
Ploughing back profits
When a company makes a good profit, it may decide not to distribute all of it to the shareholders and
instead retain some of it and reinvest it to expand the business. The company can also keep some of its
profit as a reserve to cater for emergency or difficult times.
6.
Trade credit
A retailer who has little working capital can approach the supplier and obtain stock on short term credit.
Getting supplies on credit means the retailer takes the goods and pays for them a few weeks later after
selling them. This helps to increase the retailers’ working capital, as the goods would be paid for from the
sales revenue generated.
7.
Leasing or renting equipment
Leasing enables a company to acquire up-to-date equipment or machinery without the large amounts of
money needed to buy it cash. Lease agreement eneables a firm to obtain equipment by paying a monthly
rental fee which includes maintenance. At the end of the lease period the ownership is usually transferred
to the company.
8.
Factoring
This enables a company to sell goods to customers on credit and then sell their invoices to a finance
company at less than the full amount. For example, a furniture dealer like Supreme Furnishers may sell a
lounge suite to a customer for P1000 on credit and take the invoice to a finance company and get P900 for
it. In this case, Supreme Furnishers gets its money immediately, leaving the factor to collect the amount
outstanding and deal with any possible bad debts.
9.
Government grants and loans
Another sources of capital to a business is the grants offered by the government. For example, the
Financial Assistance Policy (FAP) in Botswana, which provides firms a certain amount of money, to help
them set up a manufacturing business in the country, has been very helpful to many companies.
10.
Mortgaging property
Mortgaging refers to getting a loan from a financial institution and offering the company’s assets such as
buildings and or land as security. It is also an important souce of capital.
11.
Hire purchase
73
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 74 of 89
Buying vehicles or equipment on hire purchase or credit can also relieve the company of financial
problems. The firm will pay a deposit and get the goods and then pay the balance outstanding by monthly
instalments over a period of 2 to 5 years. The advantage here is that the company spreads the costs of the
item over a numbr of years hence lessens the financial burden.
Factors to consider before choosing a method of financing
There are many reasons why a firm may need additional capital. It could be to finance it expansion or to
upgrade or modernise its operations. But, whatever the reason, before a business chooses which method to
use to finance its projects the following factors need be considered.





C.
Interest rates
Amount of finance repayment
Time allowed or duration of the loan
Security available, which the company can provide
Purpose and availability of the various methods.
THE CAPITAL OF A LIMITED COMPANY
The capital of a limited company is raised by selling shares or debentures. The total amount of money that
a limited company is allowed to raised through issuing shares is called authorised capital. This may be
issued in stages as and when the company wants extra capital. The actual amount of capital which has been
raised and paid for at any one time is called issued capital.
Authorised capital
Shares
Ordinary
shares
Preference
shares
Debentures
Redeemable
Naked
debentures
Mortgaged
Irredeemable
The capital of a limited company
1.
What are shares?
A share is a unit of a limited company’s capital. When a person buys a share in a company he/she is given
a share certificate showing the number, value and type of share he/she owns. He/she then becomes a
shareholder, in fact, a part-owner of the company. This is because limited companies are owned by
shareholders. Buying a share in a company is an investment the reward of which is a dividend or a share of
any profits made by the company. The market where shares are bought and sold is known as the stock
exchange.
1.
What are shares?
A share is a unit of a limited company’s capital. When a person buy share in a company he/she is given a
share certificate showing the number, value and type of share he/she owns. He/she then becomes a
shareholder, in fact, a part-owner of the company. This is because limited companies are owned by
shareholders. Buying a share I a company is an investment the reward of which is a dividend or share of
any profits made by the company. The market where shares are bought and sold is known as the stock
exchange.
(a)
Types of shares
In general there are two types of shares namely, ordinary shares and preference shares.
(i)
Ordinary shares
74
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 75 of 89
These are shares which receive variable rates of dividend dependent upon the profits made. They normally
get dividends after the preference shares have already received theirs. Ordinary shares have voting rights.
This is possibly because ordinary shares are a more risky form of investment, so it is appropriate for their
holders to be responsible for all decision making in the company. Anyone who holds a majority of
ordinary shares controls the company because each share has one vote at annual general meetings.
If
The company fails altogether, the holders of ordinary shares will only be paid after all the debts of the
company have been paid. In exceptionally good years, when good profits are made, however, ordinary
sharholders may get more dividends than preference shareholders. All companies issue ordinary shares.
(ii)
Preference shares
These are shares which receive dividend before the ordinary shares. They get a fixed rate e.g. 10%, which
means when the company makes a profit each preference shareholders gets a dividend equal to 10% of the
value of shares they hold. Preference shares have no voting rights at annual general meetings. By selling
preference shares a company can raise capital without the exisiting owners losing control over it. There are
four main types of preference shares and these are:

Cumulative preference shares These preference shares get a fixed dividend every year. If in one
year no profits are made, they are paid ina rrears in the next year when profits are made. But even if
the company makes a very big profit, they receive no more than their fixed rate of return.

Non cumulative preferenceshares These type of preference shares do not have any right arrers of
dividend. So if the company makes no profit this year, they get nothing and the next year the
company makes a good profit they will still get their fixed amount and nothing else (even if better
than usual profits are realised.)

Redeemable preference shares
These are shares which will be bought back by the company at a later date, either out of accumulated
profits from the money got from a fresh sale of shares. They are usually used to help start a company.

Participation preference shares
There is another type of preference shares called participating preference shares which entitle the holders to
get a bonus if a very big profit is made in the particular year. Their holders also participate in decision
making in the company.
Differences between ordinary and preference shares
There are three main diffferences between ordinary and preference shares.

Firstly, preference shares receive a dividend before ordinary shares, usually at a fixed percentage and
the shares may be cumulative, participating or non-commutative. Ordinary shares receive a variable
rate of dividend, dependent upon the amount of profits made. (This means the more profits the
company makes the more individend the ordinary shareholders are paid and vice versa).

Secondly, ordinary shares have voting rights so their holders are the ones who control the company.
Preference shares, on the other hand, have no voting rights because their holders are assured of their
fixed rate of dividend one way or the other.

Lastly, ordinary shares are a more risky form of investment than preference shares. They only get
dividend after the preference shareholders have already got, and in bad years when little profits are
made they get nothing at all.
2.
Debentures
When a company wants to raise additional capital it can ussue debentures. A debenture is a loan given to a
company on which a fixed rate of interest must be paid whether the company makes a profit or not. It is
nothing other than a ceritificate showing the amount of money lent to the company and the interest that
must be paid on it. In case the company is liquidated, debenture holders must be paid before any of the
shareholders are. The main features of debentures are that:




(a)
They are long term loans to the company;
Debenture holders are not the owners of the company they are creditors of the company;
Debenture holders are paid a fixed rate of interest every year irrespective of the level of profits;
Debentures may be redeemable as they are loans.
Types of debentures
Debentures may be classisfied in two ways:
(i)
According to the security pledged against them, they may be naked or motorgaged.
75
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 76 of 89

Naked debentures are the ones issued without any property or security pledged against them. They
are not very secure.

Mortgaged debentures have some property pledged against them. They are more secure and if the
company is liquidated, the proceeds of the sale of the pledged property are used to pay off the
holders.
(ii)

According to redemption, they may be redeemable or irredeemable.
Redeemable debentures are usually issued for a fixed period of time and can be bought back by the
company. This means the amount borrowed against them is repaid by the company possibly after the
expiry of the fixed period.

Irredeemable debentures can never be bought back. The money borrowed against them remains
outstanding until the company is liquidated. The holders of irredeemable debentures keep getting
interest against their debentures indefinitely.
(b)
Differences between debentures and shares
Debentures and shares are fundamentally very different.






E.
A share is a unit of capital whilst a debenture is a loan borrowed from members of the public.
A shareholder is a part-owner of the company and may vote but a debenture holder is a creditor and
has no voting right.
Shares a re paid dividends when profits are made but debentures are paid interest, whether or not the
company makes a profit.
Shares are usually irredeemable although they may be transferred, whilst debentures are redeemable
as they are oloans.
When a company is liquidated, debenture holders are paid only the face value (plus any outstanding
interests) of the debentures held. But, if more money is raised by the sale of assets shareholders may
get more than the face value of their shares.
The interest paid to debenture holders is fixed but dividends paid to especially ordinary shareholders
is variable.
Business Calaculations
Every firm needs to keep a detailed and accurate record of:





the value of assets, that is, properties owned by the firm;
the value of liabilities, that is, the amount owed by the business to others;
changes in assets and liabiolities;
the value of sales; and
the value of purchases.
Proper and accurate record is particularly essential:




1.
if the firm is to calculate and make available to owners details of the value of the fime and profits
made;
if managers are to effectively control the firm and plan its future developments;
so that tax can be assessed (both income tax, corporation tax and value added tax);
to meet the provision of the Company’s Act 1980, which requires that a company’s account be filled
in the company registration office annually.
Profits
Profti is the reward for doing business. The business person takes the risk of manufactuirn something or
providing some service so as to get profit. The profitability of a business can be looked at from the point of
view of either gross profit or net profit.
(a)
Gross profits
Gross profit is the differences between the cost of goods sold and the proceeds from their sale. Put simply,
gross profit is selling price minus cost price. Gross profit is not the true profit since the expenses incurred
in selling the goods have not been taken into account. It is calculated as:
Gross profit = Turnover minus Cost of goods sold.
76
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 77 of 89
For example: If a trader buys a bicycle at P100 from the wholesaler and sells it at P145 the difference is
his/her gross profit.
The price at which the trader bought the bicycle is called cost price. (C.P) and the price at which the trader
sold the bicycle is called the selling price (SP.). The gross profit is calculated as follows:
Gross Profit, GP = Selling Price – Cost Price
i.e.
GP = SP – CP.
In our example,
GP = P145 – 100 = P45.
(b)
Net Profit
This is the true profit obtained from trading. (In other words, it is the real reqard of the trader). It is the
amount left after allowances have been made for all expenses such as rent, salaries, storage, insurance,
water, telephone and electricity bills, advertising, transport etc. Net profit is very important since it





enables the trader to know the actual benefit of trading;
enables the trader to compare what he/she investments;
it assists in forward planning;
it helps him/her to obtain a loan from the bank;
it is important for tax purposes
Net profit is calculated as follows:
Net Profit = Gross profit (plus other incomes) minus Expenses.
In our example above, suppose all the expenses amount to P15, the net profit would then be calculated as
follows:
Net Profit = Gross Profit – Expenses
i.e.
P45 – P15 = P30.
When gross profit is expressed as a percentage of cost price it is called profit mark-up but when it is
expressed as a percentage of selling price it is called profit margin.
The following example shows how the profit mark-up is calculated:
To use the same example as above, let us say, a trader goes to the wholesaler and buys a bicycle at P100
and sells it at P145, the difference being his/her gross profit.
Percentage mark-up = Selling Price – Cost price x 100
Cost Price
i.e.
P145 – 100) x 100 = 31%
145
(d)
The relationship between profit mark-up and profit margin
When profit mark-up is
1/
3
¼
2/
5
3/
8
Profit margin will be
¼
1/
5
2/
7
3/
11
Table 4 The relationship between profit mark-up and profit margin
You arrive at profit margin by adding the numerator to the denominator while using the same numerator.
When margin is given you do the opposite (i.e. subtracting the numerator from the denominator).
The calculation of gross profit shown above assumes that the trader buts only one commodity, the bicycle.
In practice traders, usually buy several types of goods. Also at the beginning of the year there could have
been some old stock of unsold goods carried forward from the previous year. The stock at the beginning of
the year is called opening stock and the stock of goods lying unsold at the end of the year is called closing
stock.
77
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 78 of 89
Therefore, in practice, to calculate the gross profit you have to sum up the total value of goods sold during
the year, called Turnover. . You can do this following the steps given below.
(i)
Determine the value of opening stock.
(ii)
Determine the total value of goods bought during the year.
(iii)
Find out if any goods were returned to the supplier during the year.
(iv)
The difference between (2) and (3) is called Net purchase of the year.
(v)
Add (1) to (4) i.e. opening stock to net purchases to get the total value of
sale during the year.
(vi)
Find the value of closing stock by stocktaking.
(vii) Subtract (6) from (5) i.e. closing stock from the goods available for sale, to
goods sold during the year. This is called the “Cost of Sales”.
(viii)
goods available for
get the final cost of
Calculate the gross profit i.e. Net sales minus cost of sales.
SUMMARY





2.
Cost of sales = Opening stock plus net purchases minus closing stock.
Net Sales = cost of sales minus gross profit.
Gross profit = net sales minus cost of sales.
Net profit = gross profit minus expenses.
Expenses = gross profit minus net profit.
TURNOVER
The turnover or net sales is the net value of goods sold during an accounting period. It is calculated as
follows:
Turnover = Sales minus Returns inwards OR Turnover = Sales minus Cost of goods sold plus gross profit.
3.
COST OF GOODS SOLD
This is the cost price of goods that have been sold. It is calculated as:
Cost of goods sold = opening stock plus net purchases minus Closing stock or;
Cost of goods sold = Turnover minus gross profit.
4.
RATE OF TURNOVER OR RATE OF STOCK TURN
This is the number of times the average stock can be sold in an accounting period. (It is actually the
number of times a firm orders and sells out its stock each year.). It is calculate as follows:
Rate of stock turn = Turnover or
Average stock
Rate of stock turn =
5.
Cost of goods sold
Average stock
Average Stock
This is the average number of stock held in the business for the accounting period. It is actually the
average of the opening and closing stock. It is calculated as:
Average stock = Opening + closing stock
2
6.
Gross Profit Percentage
This net profit percentage shopws actual average profit made adter taking into account all costs and
expenses incurred. It is also known as the net profit percentage of turnover. It is calaculated as:
78
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 79 of 89
Gross profit percentage =
8.
Gross Profit x 100
Turnover
1
Rate of Return on Capital Invested
The rate of return on capital invested is extremely important to a businessman or woman for it tells him/her
exactly how much he/she is getting from the investment. It is calculated as:
Rate of return on capital invested =
Net profit x 100
Capital at start of the year
This ratio helps the businessman or woman to determine the probability of his/her business. He/she is thus
able to decide whether it is worthwhile or not to keep his/her money in that investment.
9.
Mark up
This is the percentage of gross profit to the cost of goods sold or the percentage of profit to cost price. It is
calculated as follows:
Mark up =
10.
Gross profit x 100
Cost of goods sold
Margin
This is the percentage of gross to turnover or selling price. It is calculated as:
Margin = Gross profit x 100
Turnover
F.
THE BALANCE SHEET
A balance sheet is a statement of the financial position of the business or an individual at a given time. It
shows the company’s assets and liabilities. It is usually drawn a tabular form as follows:
ASSETS
Buildings
Shop fittings, vehicles, machinery
Stock (raw material/goods)
Cash (at bank and in till)
LIABILITIES
Capital
Bank loan
Creditors
TOTAL
TOTAL
The Balance sheet
The balance sheet equation can be written as Capital = Assets minus Liabilities.
1.
THE BALANCE SHEET INTERPRETATION
The balance sheet of a firm shows the financial position at a particular date. It gives the summary of its
reserves, capital, liabilities and assets.
(a)
Assets
These are the properties of a business. Assets can be divided into two: fixed assets and current assets.
Fixed assets are the properties, of a business, whose values do not change from day to day, e.g. land,
buildings, equipment, etc.
79
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 80 of 89
Current assets are the propertis of a businesses or individuals and can be divided into fixed or long – term
liabilities and current liabilities.
(b)
Liabilities
This is money owed by a firm to other businesses or individuals and can be divided into fixed or long-term
liabilities and current liabilities.
Long term liabilities are amounts which have to be repaid over a number of year, for example, a ten year
loan or mortgage on premises.
Current liabilities are short term and have to be paid in less than a year’s time, for example, creditors (i.e.
goods or stock obtained on credit).
G.
HOW PROFITS AND LOSSES AFFECT CAPITAL
When a company makes a profit, its capital increases, especially if it is reinvested in the business. A loss,
however, represents a decrease in capital and may eventually lead to the closure of the company if it
persists.
80
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 81 of 89
STOCK EXCHANGE
(a)
(b)
©
(d)
(e)
(a)
Describe the functions of a stock exchange and ex[plain its importance to investors
Expain the role of :
(i)
stock broker
(ii)
dealers on the stock exvhange
What are the functions of the stock exchange council?
What factors determine the price of shares on the stock exchange?
What are the functions of the contract note on the stock exchange?
Functions of the Stock Exchange and its importance to investors
Providing a market where stocks and shares can be sold and bought.
Stock exchange approval gives indication to the investors that the company quoted is reputable.
It provides a pace where people with savings can invest and lend those companies that need to raise finance.
Prepares reports and data concerning all organisation on the Stock Exchange
It establishes a code of conduct which members of the stock exchange must follow.
Enable government to raise funds.
Gives savers opportunity of investing in industry and commerce.
Regulates members of the market
Provides rules to protect investors against fraud.
Enables transfer of second hand securities.
Provides place where prices can be determined freely on basis of supply and demand.
Vetting companies applying for stock exchange quotations/listing.












(b)
(i)
The Work of the Stock Brokers on the Stock Exchange
Because members of the public are not allowed to trade on the stock exchange:
 the Stock broker acts as agents, buying and selling shares on behalf of the general public.
 They try hard to obtain the best possible prices for their clients
 The brokers compare prices in the market and usually buy and sell acording to their clients’ instructions
 They prepare a contract note setting out the amounts to pay or receive their commission.
 The arrange for share certificate’s or stock transfer forms to be dealt with.
 The broker advise their clients on matters relating to market conditions.



(ii)
The work of Dealers on the stock exchange
These are principal who buy and sell shares on their own behalf with a hope of making profit
They deals with stock brokers only as the members of the public are not allowed to deal directly with them
The may specialise in certain types of securities such as dealing in oil shares or mining shares






© Functions of the Stock Exchange Council
to control the admission of new members
to discipline members who are guilty of misconduct
to formulate the stock exchange rules
to settle disputes between members
to provide information services to members
to accept and publish shares of companies to be quoted on the stock exchange.
(d) Factors that Determine the prices of Shares at the Stock Exchange
To supply and demand for the shares
 Recent performance of the company
Political changes in the country e.g. change of
 The popularity of the company’s product
government
 The general prosperity of the country
 Changes in interest rates or taxation
 Changes in market trends
 Strike/industrial disputes in the company
 Take overs and merges being considered


(e)
Functions of the Contract Note on the Stock Exchange
81
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Page 82 of 89





Informs the client number of shares bought or sold
Shows the type and the unity price of shares
Shows the commission to be paid by the client
Shows the total amount to be paid or due to the client
Shows settlement date, when payment or delivery of share to be made
Author;
Simwanza Enock
Bachelor of Business Studies with Education (Kwame Nkrumah University)
Masters Degree in Educational Management and Administration (St Eugene DMI University)
82
Simwanza.E (Mr) - (0977796413 & 0950515121)
simwanza90enock@gmail.com
Download