Customer:
Quotation-No.:
Contact:
Customer Item:
Lake City
Inquiry-No.:
3129
Yumna
JW PHE for MAN 9L 21/31 Engine
Kelvion Plate Heat Exchanger:
Item:
Date:
830
Alternative: 0
16/03/2021
NT100T CDL-10
Thermal data for 1 unit(s) in parallel and 1 unit(s) in series
hot side
Media:
cold side
Jacket Water
Cooling Water
Media group acc. PED 2014/68/EU: Group 2 - others
Heat exchanged:
Group 2 - others
940.00
kW
Mass flow:
14.94
17.35
kg/s
Volume flow:
55.25
63.00
m³/h
Temperature inlet:
85.00
35.00
°C
Temperature outlet:
70.00
47.96
°C
Pressure drop:
264
314
mbar
Velocity gap / connection:
1.10
Working pressure inlet:
6.01
6.01
bara
Filling volume:
0.01098
0.01183
m³
Wall shear stress:
0.057
0.066
kPa
Density:
973.31
991.60
kg/m³
Heat capacity:
4195.05
4179.80
J/kgK
Thermal conductivity:
0.66529
0.63034
W/mK
Dyn. viscosity inlet:
0.3331
0.7191
cP
Dyn. viscosity outlet:
0.4035
0.5658
cP
1.65
1.16
1.88
m/s
Product properties
Unit Data
Plate Type:
NT100T V
Heat transfer area (total / per unit):
6.48
6.48
Number of plates (total / per unit):
26
26
Plate thickness:
0.5
Log. mean temperature difference:
36.01
OHTC needed / clean:
4028
Surface margin / Fouling factor:
57.52
Plate material:
AISI316L
Gasket material / Gasket type:
m²
mm
K
%
NBR
6345
W/m²K
91
m²K/W E-6
glueless
Internal flow (passes x channels):
1 x 12
1 x 13
No. of frames (par. / ser. / total):
1
1
1
Material pressure plates / surface:
S355J2+N
painted
RAL5002
Tightening bolt material and surface:
42CrMo4 galvanized
CIP:
The connection types and positions are defined in the attached dimension sheet.
Design temperature:
Min.:
0.00 / 0.00
Max.: 120.00 / 120.00
°C
Design pressure:
Min.:
1.01 / 1.01
Max.: 7.00 / 7.00
bara
Test pressure:
8.80 / 8.80
bara
Design code: PED 2014/68/EU AD-2000 Checkfactor 1.3
PED category:
Category I, Modul A, CE-Sign no notified body
Conformity assessment diagram:
Medium innocuous and steam pressure at Tdesign> 0.5 barg
Remarks:
Dimension Sheet Plate Heat Exchanger
Customer:
Quotation:
Customer item:
Lake City
3129
Item No.: 830
Dimensions of drawing in [mm]
Type: NT100T CDL-10
n: 545 mm
k: 621 mm
l:
465 mm
Frame extension:
Pos
1F
2F
3F
4F
Size
DN100
DN100
DN100
DN100
s 1:
s 2:
h:
Alternative No.: 0
40.00 mm
40.00 mm
1110 mm
28 / 110.70
a-max frame:
a-max actual:
189 mm
90 mm
Plates / %
Bolt extension :
0100-102-Model.tif
Weight:
Weight oper:
max. bolt length:
Type
Rubber insert EN1092-1-PN16 NBR
Rubber insert EN1092-1-PN16 NBR
Rubber insert EN1092-1-PN16 NBR
Rubber insert EN1092-1-PN16 NBR
Media
Water
Water
Water
Water
29 / 115.16
Side/Flow
hot - in
cold - out
cold - in
hot - out
420 kg
441 kg
450 mm
Plates / %
m
4 mm
4 mm
4 mm
4 mm
Rubber insert
EN1092-1-PN16
NBR
PN 16
1F;2F;3F;4F
Technical Revisions reserved. Layer thickness in case of painted frames acc. DIN EN ISO 12944-5, frame plate
surface quality acc. DIN EN 10029. The design details are valid for phe manufactured by Kelvion PHE
GmbH/Sarstedt.