ASME IX Part QW Article I Article II Article III Article IV Article V Welding Genaral Requirements Welding Procedure Qualification Welding Performance qualification Welding Data Satndard Welding Procedure Specifications SWPSs Tests: QW-150 QW-160 QW-170 QW-180 QW-190 Tension Test Guided-Bend Test Notch-Toughness Test Fillet Weld Test Other Tests and examinations WPS: QW-402 QW-403 QW-404 QW-405 QW-406 QW-407 QW-408 QW-409 QW-410 Joints Base Metals Filler Metals Position Preheat Post weld heat treatment Gas Electrical characteristics Technique Welding: QW-1XX QW-2XX QW-3XX QW-4XX QW-5XX To qualify a groove weld procedure, the type and number of test specimen are given in QW-451 Manner of removal of specimens, see QW-463 To qualify a fillet weld procedure, the requirements are given in QW-202,2 ( c ) To qualify a stud weld procedure, the requirements are given in QW-202,2 ( c ) Qualification for groove Full Penetration welds: limits of qualification shall be in accordance with QW-451 Tests: Tension and guided-bend Notch-toughness test (to be mandatoru under some condition) Qualification for fillet welds: Tests shall be in accordance with QW-180 limits of qualification shall be in accordance with QW-451.3 Weld Repair, QW-202.3: WPS qualified on groove welds shall be applicable for weld repair to groove and fillet welds. Qualification for stud welds: Procedure qualification tests shall be made in accodance with QW-192 Welding Variables in WPS, Legend: Welder Performance qualification: QW-300.1: A welder or welding operator may be qualified by : Volumetric NDE of a test coupon or (Volumetric NDE of) their initial production welding within the limitations of QW-304 and QW-305 or by bend tests taken from a test coupon *Type and number of test specimen required for mechanical test shall be in accordance with QW-452 Prepared by: Lotfi GASMI 11/9/2015 QW-253 Welding Variable Procedure Specification (WPS) QW-353 Welding Variables For Welders-Essential Variables QW-420 Base Metal Groupings QW-422 P-Numbers, Grouping of Base Metals for Qualification QW-423.1 Alternate Base Materials For Welder Qualification QW-424.1 Base Metals Used For Procedure Qualification QW-432 F-Numbers, Grouping of Electrodes and Welding Rods for Qualification QW-433 Alternate F-Numbers For Welder performance Qualification QW-442 A-Numbers, Classification of Ferrous Weld Metal Analysis For Procedure Qualification QW-451 Procedure Qualification Thickness Limits and Test Specimens. QW-452 Performance Qualification Thickness Limits and Test Specimens QW-461.9 Performance Qualification-Position and Diameter Limitations QW-463 Location of Tests Specimens for Procdure Qualification Table 331.1.1 Requirements for Heat Treatment (ASME B31.3 ) Retour Table QW-253 Table QW-253.1 Table QW-254 Table QW-254.1 Table QW-255 Table QW-255.1 Table QW-256 Table QW-256.1 Welding Variables Procedure Specification (WPS) - SMAW Welding Variables Procedure Specification (WPS) - SMAW Welding Variables Procedure Specification (WPS) - SAW Welding Variables Procedure Specification (WPS) - SAW Welding Variables Procedure Specification (WPS) - GMAW & FCAW Welding Variables Procedure Specification (WPS) - GMAW & FCAW Welding Variables Procedure Specification (WPS) - GTAW Welding Variables Procedure Specification (WPS) - GTAW Retour Table QW-353 Table QW-354 Table QW-355 Table QW-356 Welding Variables For Welders-Essential Variables - SMAW Welding Variables For Welders-Essential Variables - SAW Welding Variables For Welders-Essential Variables - GMAW & FCAW Welding Variables For Welders-Essential Variables - GTAW Retour Retour Retour Retour See page 97, ASME IX 2013 Retour Retour See page 167, ASME IX 2013 Retour Retour Retour Retour Retour SEE : ASME IX page 213, and others pages Retour Retour